If straightforward lessons aren't what you're looking for, fear not: Rocksmith 2014 tries to refresh your picking skills through games that veer into the ridiculous. I tried out Return to Castle Chordead, which revels in delightfully bad NES-style graphics (the game challenges the player to zap the hungry undead by playing the correct chords). Scales Racer—which, you guessed it, teaches the major and minor scales—puts the player in a car fleeing the police. Pick the right notes and you zip between lanes, eluding the fuzz.
The hollow body — the original electric guitar design — is completely hollow on the inside, like an acoustic guitar. Hollow-bodied guitars like the Gibson ES-150 saw use in jazz ensembles by players such as Eddie Durham and Charlie Christian, but were also adopted for country, folk and, eventually, rock and roll. If you’re looking for warm, mellow tones, the hollow body is your best bet. That isn’t to say it can’t give you some sweet, raunchy distortion. A proper hollow-body setup can pull off a great classic blues or rock sound, but they are more prone to feedback than solid body guitars.
Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.
Most bass combo amps and bass speaker cabinets are "front-firing"; that is, the speakers and horn, if a horn is present, aim forwards. However, because very low-pitched sounds are omnidirectional, some combos and cabinets have woofers that point down or to the rear. The deep bass tone radiates from the cabinet in all directions, even when it is pointed downward or to the rear. The Acoustic Image combo bass amp has a downward-firing woofer for the deepest pitches, and another forwards-firing speaker for higher-pitched sounds. The vintage Acoustic brand 361 cabinet had a rear-firing 18" woofer, an approach used in a number of home cinema subwoofer cabinets. The rare examples of bass cabinets that use a large folding horn can also use woofers that do not face forward.
The first recording of an electric guitar was by jazz guitarist George Barnes who recorded two songs in Chicago on March 1st, 1938: Sweetheart Land and It's a Low-Down Dirty Shame. Many historians incorrectly attribute the first recording to Eddie Durham, but his recording with the Kansas City Five was not until 15 days later. Durham introduced the instrument to a young Charlie Christian, who made the instrument famous in his brief life and is generally known as the first electric guitarist and a major influence on jazz guitarists for decades thereafter.
Anonymous, that's tough one. Usually, breaking the D string would be down to two things - a sharp edge on the saddle (unlikely if you're using a roller bridge) or your technique. The only other thing I can think of right now is the break angle (how sharply the strings pass over the saddle on the way to the tailpiece). Perhaps raising the tailpiece (or feeding the strings through from the front and then passing them over the tailpiece - you could do this second one with the D string only) might help.
Description: Body: Maple - Burled - Top Wood: Maple - Burl - Neck Attachment: Set - Neck Wood: Mahogany & Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: 20, Medium - Inlay: Pearloid & Abalone - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ART-W - Bridge Construction: Ebony - Cutaway: Single - Hardware: Gold - Circuit Type: Passive - Pickups: Super 58 - Pickup Configuration: H-H - String Instrument Finish: Blue Lagoon - String Instrument Accessories: Hardshell Case
PAINT INFO Remember to stick with the medium that you have chosen to finish the guitar with. Never mix lacquer with water base. This will lead to a cracked finish or lifting up off the clear coat. For my guitar I used a lacquer based paint that I got from an auto shop for one project and just plain white lacquer paint that i got from Home Depot. The waterbased paints and clear coats tend to be more expensive so that's why I chose lacquer. Make sure the surface has been cleaned and is dust free before you begin to paint. Try to find cans that have a fan nozzel because it makes it easier to get an even coat.
Of course, for the guitar string vibrations to have an effect on the magnetic field of the pickups, they too need to contain a ferromagnetic metal; this can be either iron, cobalt, or nickel. There are a large number of different string compositions, but often they will consist of steel, a combination of iron, carbon, and sometimes chromium. The chromium can help prevent corrosion, as it forms a layer of chromium oxide which prevents the string from further attack by oxygen in the air. Additionally, the strings can sometimes be coated with various polymer additives to help inhibit corrosion. However, these additives can sometimes have a negative effect on the tone of the guitar.
{ "thumbImageID": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "defaultDisplayName": "Rogue Starter Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blue Burst", "sku": "sku:site51275425409510", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Blue-Burst-1275425409510.gc", "skuImageId": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Starter-Acoustic-Guitar-Blue-Burst/519266000030000-00-60x60.jpg", "imgAlt": "" } , { "name": "Walnut", "sku": "sku:site51275776901291", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Walnut-1275776901291.gc", "skuImageId": "Starter-Acoustic-Guitar-Walnut/519266000115000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Starter-Acoustic-Guitar-Walnut/519266000115000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pink", "sku": "sku:site51275776901306", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Pink-1275776901306.gc", "skuImageId": "Starter-Acoustic-Guitar-Pink/519266000218000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Starter-Acoustic-Guitar-Pink/519266000218000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901295", "price": "49.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Black-1275776901295.gc", "skuImageId": "Starter-Acoustic-Guitar-Black/519266000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Starter-Acoustic-Guitar-Black/519266000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Matte Natural", "sku": "sku:site51275425409512", "price": "59.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Matte-Natural-1275425409512.gc", "skuImageId": "Starter-Acoustic-Guitar-Matte-Natural/519266000049000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Starter-Acoustic-Guitar-Matte-Natural/519266000049000-00-60x60.jpg", "imgAlt": "" } , { "name": "Red Burst", "sku": "sku:site51275776901310", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Red-Burst-1275776901310.gc", "skuImageId": "Starter-Acoustic-Guitar-Red-Burst/519266000224000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Starter-Acoustic-Guitar-Red-Burst/519266000224000-00-60x60.jpg", "imgAlt": "" } ] }
accessories aeolian mode analog basic chords basic guitar chords beginner best guitar brands cheap guitars chord diagrams digital dorian mode easy guitar songs effects guitar guitar amp photos guitar buying guitar effects guitar equipment guitar kits introduction ionian mode lessons locrian mode lydian mode major key major scale mixolydian mode music studio natural minor scale noise control pedalboard pentatonic major pentatonic minor phrygian mode pickups practice room recording scale diagrams soundproofing theory used guitars
{"reportSuiteIds":"guitarcenterprod","pageName":"[gc] services:repairs","prop2":"[gc] services:repairs","prop1":"[gc] services","prop5":"[gc] services:repairs","prop6":"[gc] services:repairs","prop3":"[gc] services:repairs","evar51":"default: united states","prop4":"[gc] services:repairs","channel":"[gc] services","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] services"}
James Patrick "Jimmy" Page, OBE is an English musician, songwriter, multi-instrumentalist, and record producer who achieved international success as the guitarist and leader of the rock band Led Zeppelin. Page began his career as a studio session musician in London and, by the mid-1960s, he had become the most sought-after session guitarist in England. He was a member of the Yardbirds from 1966 to 1968. In late 1968, he founded Led Zeppelin. Page is widely considered to be one of the greatest and most influential guitarists of all time. Rolling Stone magazine has described Page as "the pontiff of power riffing" and ranked him number 3 in their list of the "100 Greatest Guitarists of All ...more on Wikipedia
The vibration of the wood isn't in question at all. It does indeed vibrate and if you put a microphone up to the wood of the guitar as it's being played (and if you can manage the feedback) you'll no doubt hear the tonal qualities of the wood. You can knock on it to hear that. It's like knocking on a door. ANY wooden door or any processed wood for that matter.
{ "thumbImageID": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "defaultDisplayName": "Yamaha GigMaker Acoustic Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115034173", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Natural-1274115034173.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tobacco Brown Sunburst", "sku": "sku:site51274115034083", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "285.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst-1274115034083.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst/519040000337000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst/519040000337000-00-60x60.jpg", "imgAlt": "" } ] }
My live rig for years has been a multi FX floor pedal (currently, and for the past seven years, using a BOSS GT-8) running the left and right outputs into the effects RETURN of a small amp on stage and through a speaker cab simulator (lately, a “CABTONE” by Digital music Corp, at other times a Hughes & Kettner “RED BOX”) We often play as a ten piece band, with trumpet, trombone, three saxes… and here am I with a 30 watt Behringer amp with an 8 inch speaker, my BOSS GT-8 and a CABTONE direct box/speaker simulator going to the PA. Sounds great. (I’ve substituted bigger amps at times… a Tech21 Power Station… but to my ears, the Behringer sounds better.) You’re probably thinking… a 30 watt Behringer? That’s a “toy,” right? It’s enough. Well, that and the fact that the other “direct” channel is in our monitors, making for a rich 3D stereo sound on stage between the amp and the monitors. I am looking to upgrade to a multi effect processor that allows different cab simulations per patch – maybe the Eleven Rack… (I would have a hard time justifying the expense of the Fractal system) but honestly, I’ve been very happy with the setup I just described. Been happy with it the past seven years, and before that, it was different amps (actually bypassing everything but the power amp and speaker) and different floor processors (Digitech, Rocktron, BOSS…) but the same idea… one output to the board, the other to a small amp.
This legendary thinline electric guitar has been in continuous production since 1958 and has been updated for 2019. The new Gibson ES-335 Figured has the classic semi-hollow body construction with a chambered maple center block with a three-ply AAA-grade figured maple/poplar/maple top and back. Its bracing is made of quarter-sawn Adirondack spruce. The center block and bracing are both thermally engineered.
A Zoom G3X review is not complete without talking about the inclusion of a tuner and looper with built-in rhythm patterns. Just like all of this pedal’s functions, calling up the tuner is very easy; you just hold down the middle footswitch for a couple seconds. As we covered in our best looper pedal guide, a looper is an indispensable practice tool, and the fact that you get a pretty nice one in this unit is a huge plus in our book. The G3X gives you 40 seconds of loop time, which is ample time to record something interesting. You get 41 very basic drum patterns, and while they don’t sound amazing, it’s nice that they sync with the looper. Have a look at this 3 minute demo video of a performance using the looper and other Zoom G3X effects:

Launch price: $799 / £826 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Pau ferro (rosewood reviewed) | Frets: 21 | Pickups: American Vintage '58 Single-Coil Tele, American Vintage '52 Single-Coil Tele | Controls: Volume (with S-1 Switch), tone | Hardware: 3-saddle American Vintage strings-through-body bridge | Left-handed: No | Finish: Faded Sonic Blue, 3-Color Sunburst
The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
Non Locking Tremolo TREMOLO FAT/SAT MONTAGGIO DEL BRACCIO DEL TREMOLO L'inserimento e la rimozione del braccio del tremolo sono operazioni estremamente semplici. Inserire il braccio nell'apposito foro sulla piastra di base del tremolo. Tirare il braccio per rimuoverlo. REGOLAZIONE DEL BRACCIO DEL TREMOLO (SAT PRO) Per regolare l'altezza del braccio, rimuovere il coperchio della molla del tremolo dal retro della chitarra e utilizzare una chiave a brugola da 3 mm per girare la vite di regolazione dell'altezza sulla parte inferiore del blocco tremolo.
Around the same time as the 700-800 series of guitars there was also a line of acoustics. The steel-stringed "Folk Guitars" featured necks and headstocks very similar, if not the same as, the electric models. The nylon-stringed "Classical Guitars" featured slotted headstocks with the curly logo squeezed into the middle. The acoustics seem to be pretty well-made and often fetch pretty good prices on Ebay. One reader of this site even found a Kent banjo made in Germany. The lettering of the name is the same as on the 700-800 series instruments without the curly thingie.
Typically, guitar amplifiers have two amplifying circuit stages and in addition frequently have tone-shaping electric circuits, which usually include at least bass and treble controls, which function similarly to the equivalent controls on a home hi-fi system. More expensive amplifiers typically have more controls for other frequency ranges, such as one or two "midrange" controls and a "presence" control for high frequencies. Some guitar amplifiers have a graphic equalizer, which uses vertical faders to control multiple frequency bands. Some more expensive bass amps have a parametric equalizer, which enables precise control of tone.

If you want to explore the two-channel tubes amps, start with Vox. The British brand is known for making workhorse amps that were used by classic rock’s best, and this small 15 watt option will give you all the tone is a small package that you can crank up in small spaces. Along with a simple set of controls, it features a by-passable effects loop for those players who are experimenting with different gear.
@Carl – Sorry to hear that you are having trouble. I am not clear on why this would be happening from the info you have provided. Can you please shoot us an email with details on the input and output connections and how each pedal is being powered when you experience this problem? Also, please also include a video that clearly shows this behavior, your connections, and how each pedal is being powered so that we have a better understanding of what you are experiencing. support@strymon.net
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it. Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low! Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone. I was so happy and asked him how much, he said it was easy so he didn't want take any money. But i have him some coffee money and he said it was too much, I said it was for a week and he laughed. My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems. Steve is a hidden gem in the Boston guitar world.
Audio feedback: Audio feedback is an effect produced when amplified sound is picked up by a microphone or guitar pickup and played back through a guitar amplifier, initiating a "feedback loop", which usually consists of high-pitched sound. Feedback that occurs from a vocal mic into a PA system is almost always avoided. However, in some styles of rock music, electric guitar players intentionally create feedback by playing their instrument directly in front of a heavily amplified, distorted guitar amplifier's speaker enclosure. The creative use of feedback effects was pioneered by guitarists such as Jimi Hendrix in the 1960s. This technique creates sustained, high-pitched overtones and unusual sounds not possible through regular playing techniques. Guitar feedback effects can be difficult to perform, because it is difficult to determine the sound volume and guitar position relative to a guitar amp's loudspeaker necessary for achieving the desired feedback sound.[90][91] Guitar feedback effects are used in a number of rock genres, including psychedelic rock, heavy metal music and punk rock.
In fact, at the beginning of this article I mentioned John Mayer’s song, “I Don’t Trust Myself.” The way that guitar tone is achieved is by using a filter pedal called the AdrenaLinn III. That effect is a beat-synced filter effect, meaning it has the ability to sync up the sweeping filter with the rhythm of a song. This is accomplished by either tapping in the tempo on the pedal, or setting the tempo with the tempo knob.
As the market for iOS devices and apps has grown, so has the availability of affordable stompboxes and processors that can store downloaded effects. Being able to sample, purchase, and download effects through an iOS app or digital download gives you access to a whole new palette of sounds. Though relatively new, in years to come this may well become the way in which most players will assemble their effects libraries.
Not surprisingly, we’ve established that each type of guitar has its good and bad points. For mine, the secret is to look harder at the huge variety of steel string acoustic guitars. For instance, if you’re aiming to eventually play electric guitar, you can choose an acoustic with a narrow fret board, thin neck and cut-away body around the fourteenth fret. This gives you the feel and function of an electric guitar without annoying the rest of the house. You can learn those lightning licks to perfection, before investing in serious electric guitars and amplifiers. The downside? They don’t really cater for percussive, aggressive styles of acoustic playing. The body-thumping, string-thrashing kind. For that, you should look at guitars with more robust neck and body construction.
The stompswitches take a couple stomps to cut on. There also some tape residue around the led lights where someone covered them. But its not a huge issue for reverb considering that the way I play, I always have a little reverb on to add texture and presence to my tone. Also, if you have a pedal switch looper that you can run all your pedals through it can stay always on that way too. But I'm going set the bidding price lower just because they don't work 100% properly and the tape residue. Other than the issue with the stompswitches the effect works great. Just clarify, you have to stomp on the switch 2 or 3 times and it cuts on.
The EJ-200SCE is a great acoustic under $500. With a spruce top and maple body, it offers a great tone for the money. It comes highly recommended from other owners, who say it sounds as good as a Gibson for 1/10 of the price. It also has an onboard pre amp with a built in tuner for plugging in. It’s perfect for playing gigs or at church. It has the SlimTaper neck which will be very easy to form chords on with smaller hands. The cutaway is nice for getting those up the neck solos easily, and of course it looks great as well. Check out more pictures of this guitar here.

In the early 1960s the Brothers Grim became the first American group use Vox Amplifiers. Joe Benaron, CEO of Warwick Electronics Inc. / Thomas Organ Company, the United States distributor of Vox, along with Bernard Stockly (London), importer of Challenge pianos to the United States, arranged for the boys to have full use of the tall Super AC 100 Vox amps (4×12" speakers). The solid-state version of this amp (known in the USA as the "Super Beatle") was produced to cash in on the Beatles-Vox affiliation, but was not nearly as successful as the valve AC30 and AC15 models.
Bridge craft USA musical instruments presents the exceptionally designed Glen Burton GA204BCO Acoustic Electric Cutaway Guitar in Black by Glen Burton. Perfect for the beginner or the expert, the full package comes with Strings, Picks, Gig Bag, Strap, Digital Clip-On Tuner, Truss Rod and a 10 Watt Amplifier . This excellent Acoustic Guitar also includes: Flame top; Basswood back and sides Catalpa Neck and Bridge; Rosewood Fingerboard Steel String; Sealed Gear Tuners EQ: Active 4 Band 7545 .
WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!
Go to iOS Ram List  Both the above sets convert your device or PC to the equivalent of a high-end sound module for your midi keyboard.  It has the full 15-velocity-layered version of the Yamaha C5 Grand (592mb) along with lots of other sounds. This set also includes extra string sounds that are in the Nice-Strings-PlusOrchestra set (all except the harp).

This guitar is a good example of the late 1960s Matsumoku made imports that were flooding the Americas.  This model with these pickups were made for many years, starting around 1966 through the early 70s.  That’s a good run!  Based on my research this particular model probably dates from the late 60s.Most of the time I see these guitars with chrome or tortoiseshell pickguards, and this is the first one I’d seen with a white guard.  Has a cool shape too!  These pickups were exclusive to Matsumoku and generally have a good sound.  I’ve measured about 10 of these pickups, and the reading are often all over the place.  Some of these read out near 9k, and some read out under 5k, so obviously the specs changed over the years.  I think the hotter reading pickups came from the later 60s era.Now that Lyle name was owned by the L.D. Heater Music Company out of Beaverton, Oregon.  They had some cool electric models here and there and seemed to really focus on acoustic guitars back in the day.  Most, but not all of the electric models were made by Matsumoku.Most Matsumoku guitars were made rather well, especially the wood parts.  Bodies and necks were always top notch and their finishes hold up better than the average import guitar.  They did some great, burst finishes!  But one weak point on all these Matsumoku electric guitars were the pickup switches.  They just weren’t made to withstand constant use and almost always fail.  Dano at Happy Guitar Repair knows how to rebuild these switches, and it’s just about the only way to bring them back to life.The all-telling Matsumoku plate is back there and the neck pockets on all their guitars were really solid.  If you’re looking to get into these vintage Japanese guitars, Matsumoku models are always a good place to get your feet wet!Mike Dugan loved this particular model, even though the frets were vintage Japanese tiny, and the pickups read out a little weak, sometimes a guitar just has a little chime and zing, and this one had it.  Enjoy peeps!
In any case, by late 1933 or early ’34, Dobro expanded its amp line to include what is probably the first twin-speaker amplifier! This had a football-shaped speaker grille with lyre and Dobro insets, and two 8″ Lansing field coil speakers. Nothing else is known about this amp, but it may have had the same chassis as the single-speaker version. It can be seen on page 104 of Guitars, Guitars, Guitars (All American Music Publishers, 1988).
Description: Body: Mahogany - Body Size: Baritone - Neck Attachment: Bolt - Neck Wood: Canadian Hard Maple - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Custom - # of Strings: 7 - Headstock: 4+3 - Bridge: Tone Pros - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG HX-7 - Pickup Configuration: H-H - String Instrument Finish: Black
• Similarly, insert the Soft Clipper into the third insert slot and click on its Edit button. For settings, try putting the Input at ‑0.0, Mix at 55, 0.0, Second at 100, and Third at 57. As with the Compressor, set the output to a high level, again stopping short of distortion. These settings are intended to get you started; you may want to tweak them depending on your guitar, pickup, playing style, and so on.
My first guitar was a fender knockoff. My first professional guitar was a Gibson LP custom. I like the richer tone of the Gibson for ballads, folk and country and the Fender gives you the edge you need for rock, garage and loud stuff. Foot pedals get the sounds you need for just about any style of music with either brand. The fender neck is a bit easier to move over because it is thin and fat-fingered guys like me need a bit of help that way. The Gibson reminds me more of my acoustic guitars. Strings are an important selection for any guitar to be comfortable and get the right sound.
Pre-delay: No pre-delay? No problem! Some reverb plug-ins, from freeware favourites to tasty convolution types, don't offer pre-delay — a user-configurable gap before the onset of a reverb's early reflections and tail. It's useful to have, though, as it can contribute to the clarity and separation of individual voices and instruments in a mix when large amounts of reverb are used. Using most software DAWs it's straightforward to rig up a pre-delay for a reverb (or any other effect) that doesn't have one. All you do is set up your reverb on an aux track or channel, but place a simple delay plug-in in a slot above it. Set both plug-ins' wet/dry mix parameters to 100 percent wet, and feed them some audio using an aux send on your normal audio tracks. Now the delay plug-in operates as a pre-delay for the reverb: easy! This kind of 'modular' pre-delay actually opens up some interesting possibilities. By using a multi-tap delay, or a simple delay with some feedback, your dry signal can be fed to the reverb several times, making for longer, more complex — or plain weird — reverb tails. Robin Bigwood
If you think you might build more than one of a pedal, it’s helpful to keep a list of your preferred parts and their specifications in a spreadsheet. In manufacturing this is called a BOM (Bill of Materials). Some online stores will let you import a BOM direct into their web store and will build a purchase order for you based on the information. It’s a big time saver each time you need to order parts, and lets you compare different vendors stocks easily.

If you can’t commit hours of your time to tracking down the right electric guitar amp, we listed here a number of good ones that are varied enough to fulfill most requirements. Among these, we found the Vox Pathfinder 10 Denim to make a great choice for those that are just getting into playing guitar or who just need a good, inexpensive practice amp. It’s solid-state, so you won’t have to blow your money on replacing lamps and this will also make it easier to tweak its voice to whatever tune you want to try out. Folks who use it appreciate that resembles the overdrive on a lamp amp pretty well and at 10 W of power it can be used from a garage without any complaints from the neighbors. If this isn’t available, The Blackstar IDCORE10 will offer similar quality and even more of a possibility to play around with sound effects.
Rackmounted effects are typically built in a thin metal chassis with metal "ears" designed to be screwed into a 19-inch rack that is standard to the telecommunication, computing and music technology industries. Rackmounted effects may be one, two or three rack spaces high. When purchased from the store, rack-mounted equipment is not equipped with the rugged chassis features used on stompboxes and amps that are designed to be transported as standalone units, such as corner protectors. Rackmounted units are typically mounted in a rack, which is housed in a road case, a tough plastic case with removable front and rear covers that can be latched on during transportation to protect the knobs and switches and then removed during performances. A rackmount unit may contain electronic circuitry identical to a stompbox's, although its circuits are typically more complex. Unlike stompboxes, rackmounts usually have several different types of effects.[13]
If the wood is the foundation of the structure, of course it will contribute to how the guitar sounds. Most people who argue that wood doesn’t affect the tone say that the string cant be affected by the wood because it is suspended between the metal parts of the guitar. If this were entirely true, you wouldn’t feel vibration in the guitar body. If the body of the guitar is vibrating, then it is going to affect the vibration of the string. The foundation of a structure will affect how it reacts to vibration.
This is not a complete list of former or current American guitar companies. Among the omissions are Steinberger electric guitars and basses, now part of Gibson and Carvin, who is still independently owned and sells only direct, not through distributors or stores. I have not included the past great archtop luthiers such as D’Angelico, D’Aquisto or current archtop makers such as Bennedetto. Nor have I included the many smaller USA luthiers who are currently building excellent guitars such as Huss & Dalton, Foggy Bottom or Collings.
This is the first, and quite possibly the best reason to invest in a good miniature guitar amp. It will allow you to play with a tone that’s enjoyable at a volume that won’t get you kicked out by your condo board. Even if you live out in the middle of nowhere, and can blast your Dual Rectifier full stack as loudly as you’d like, you still have to take the feelings of those you live with into account. Few marriages remain happy when a loud instrument is in the mix. That’s also why a mini amp is a great gift for a young student guitarist. You won’t have to hear them butcher the relatively simple line from a David Bowie tune for days on end.

"It seems a waste to me to work and work for years," Rory Gallagher told Rolling Stone in 1972, "and just turn into some sort of personality." Instead, the Irish guitarist, then only 23, became legendary for his nonstop-touring ethic and fiery craft. Playing a weathered Strat, often wearing a flannel shirt, Gallagher electrified Chicago and Delta styles with scalding slide work and hard-boiled songwriting. His fans included the Edge and Bob Dylan, who was initially turned away backstage at a 1978 show because Gallagher didn't recognize him.
In addition to the alignment problem, there are other problems with using a simple text editor. For example, you'll have to align all the notes of a chord yourself... it's not easy to insert a new passage... if you make a mistake you can't just move the note... and to your system, it's just another text file. If you want to programmatic help to simplify your work, or if you want extra power (such as song playback, chord charts, and scale generation): use a TAB program.

However, in the October, 2018 issue of Premier Guitar (at least the online edition) Frank Meyers, who runs the website Drowning in Guitars, says the Kent 700s were made by a small factory called Hayashi Mokko. Frank is a true expert in vintage Japanese Guitars, so I am inclined to believe him. This is another important piece of the Kent Guitars story.
In 2009, Vox refined the Virage design with the Virage II series of guitars. This series repeated the double and single cutaway bodies of the earlier Virage series, but also included the Series 77 (with double horns emulating the Gibson SG series), the Series 55 (with resemblance to the Gibson Les Paul single cutaway), and the Series 33 (with lower cost fabrication than the 77 and 55 series). The Virage II series features a CoAxe pick-ups which resemble the earlier Three-90 features, but claimed to be lower noise. The one-piece cast MaxConnect bridge of this series is aluminium and provides both a saddle and anchor for the guitar strings.
@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.
If you choose, every hole is drilled for each component, including neck, bridge, pickguard and strap button mounting holes. If you choose the optional snap together wiring, then no soldering is required; all electronics connect together with easy to attach connectors. We have done most of the hard work for you! The body needs finish sanding only but should require no filling.
What does all this have to do with guitars? Crudely speaking, the metal strings of an electric guitar are a bit like dynamos: they make electricity when you move them. Under the strings, there are electricity-generating devices called pickups. Each one consists of one or more magnets with hundreds or thousands of coils of very thin wire wrapped around them. The magnets generate a magnetic field all around them that passes up through the strings. As a result, the metal strings become partially magnetized and, when they vibrate, make a very small electric current flow through the wire pickup coils. The pickups are hooked up to an electrical circuit and amplifier, which boosts the small electric current and sends it on to a loudspeaker, making the familiar electric guitar sound. Usually, the amplifier and loudspeaker are built into a single unit called an "amp."
Mic orientation, or the angle of the mic in relation to the speaker, becomes more critical as the mic is moved closer to the amp. Pointing the mic at the center of the cone will yield more active highs and better transient detail but fewer lows. As you move the mic toward the outer rim of the speaker, maintaining a 90-degree angle with the grille cloth, the low frequencies gradually increase because of proximity effect and other factors, resulting in a sound that may be warmer, softer, or more powerful. Many engineers like to blend these complex characteristics by angling the mic between 30 and 60 degrees off-axis from the center of the speaker.
The first successful guitar pickup was developed in the early 1930’s by Rickenbacker® to help amplify Hawaiian lap steel guitars which were popular at the time. The first pickups were single-coils and while they do a good job of picking up the guitar signal they are also susceptible to picking up interference from nearby electrical devices. The Gibson® humbucker (US Patent 2896491) was developed in the 1950’s to eliminate the “hum noises” resulting from electromagnetic interference. The humbucker uses two coils and a pair of pole pieces (having opposite magnetic polarities of each other) for each string. The coils are wound and connected to each other in such a way that the current produced by the moving guitar string in the two coils adds up (in-phase), while the current produced by electromagnetic interference in the two coils cancels (out-of-phase). Not only does the humbucker drastically reduce noise from interference, but it also has a different characteristic sound. The single-coil pickup is commonly considered to have a thin, clear and bright (more treble) sound, while the humbucker is known to have a full, but dark (less treble) sound with more overall signal output.
The body is pre-drilled and crafted from basswood, while the maple neck is meant to be glued into the neck joint, something that requires a bit of care and precision. Because of its hollow body design, installing electronics can be a bit of a challenge, but very doable as attested to by reviews. Note that wood is raw and unfinished, so you'll need a bit more sanding and patching before you paint on it.

Teisco produced guitars that were sold in the U.S. as Teisco del Rey as well as Silvertone, Beltone, Duke, Decca, Heit Deluxe, Jedson, Kimberly, Kingston, Lyle, Norma, Tulio and World Teisco, as well as some of the early Kents. At various times Teisco guitars were made for and sold under the now well-known Ibanez name. They have developed somewhat of a cult following in the U.S. which has resulted in some unrealistic prices for some models.
In the 1980s, digital rackmount units began replacing stompboxes as the effects format of choice. Often musicians would record "dry", unaltered tracks in the studio and effects would be added in post-production. The success of Nirvana's 1991 album Nevermind helped to re-ignite interest in stompboxes. Some grunge guitarists would chain several fuzz pedals together and plug them into a tube amplifier.[47] Throughout the 1990s, musicians committed to a "lo-fi" aesthetic such as J Mascis of Dinosaur Jr., Stephen Malkmus of Pavement and Robert Pollard of Guided by Voices continued to use analog effects pedals.[48]
When you buy an acoustic guitar that you’re drawn to because of its aesthetics, you will become more motivated to play it. This is especially important for beginners who may find it tedious to do the same exercises over and over again, or who may be tempted to skip practice sessions. A good-looking guitar is something you will love playing again and again.

This is a gradual and repetitive change in volume, going up and down. Done slowly and subtly it can be very gentle, but turn up the controls and you get a surf-guitar like shimmer. On extreme settings the signal turns from fully on to fully off sharply and repetitively, giving a robotic sound. Controls are usually rate and depth, with a third control to affect how sharply the volume changes occur – whether they are smooth and gradual or sharp and sudden. Tremolo pedals are often equipped with tap tempo too, allowing you to match the volume changes with the tempo of the song.
It is to note that each of these metal strings is made to vibrate at a particular rate. The amount of electrical charge produced by the vibrating motion in the pickup coils is then sent to an electric circuit, consisting of resistors and capacitors, which controls the tone and amplitude of the electric signal. The electric signal is then sent to an amplifier which is electrically connected to the magnetic pickups.
These multi-effects pedals are exactly what the name suggests: all-in-one models that pack multiple effects into a single box. There are a few benefits to this, one of which is value, since getting more than one effect at once gives you great bang for your buck. They also tend to come with presets that give you customized mixes of their various effects, which can do a lot to teach you how different effects interact and how to mix and match them yourself.

I can't believe this! Blackstar are designed and built by retired Marshall professionals and they have every last bit of knowledge on tube amps, heads, and combos. I own a Blackstar HT-1R, it is 1w but it feels like 100w just the way the Blackstar team have combined their ideas and structures and balanced it out with tubes. And line 6 is further up the list? You are mistaken bro. Another thing. These are bloody expensive and aren't very well known but Two Rock make probably the GREATEST amps ever made and I would kill to fire one up!
Musicians might not want to be replaced by machines - we (or they, as it were, because I lost whatever musician credentials I might have earned annoying people with my wooden flute as a beggar on the streets of a tourist town when I started programming computers to play music) might make a strong case that no machine can express the human soulfulness of music. It is easy to conclude that, the more of the musical task that is assigned to a machine, the less soul is expressed in the music. Well, great big rock-n-roll wall of sound that all over your acoustic guitar soul. That stack of Fender amps I can hear five miles from the stadium where David Gilmore is strumming a guitar is as much an instrument as was the Shepard's lute - and a much more popular instrument now, for audiences attuned to the daily roar of tires crushing air against pavement. 

The interface does get the job done well, it’s just that I’ve seen better looking free VSTs. But for me, this is completely fine because while flashy interfaces are nice, problems like software issues and hard to see text occur.  None of that is here, and within a few hours, most users will feel fairly comfortable creating moderately difficult, but realistic sounding guitar parts.

The Kay guitar company's origins date back to the 1890's, starting with the Groeschel Mandolin Company of Chicago, Illinois. The company's name was changed to "Stromberg-Voisinet" in 1921, and shortlyafterwards, in 1923, Henry Kay "Hank" Kuhrmeyer (the origin of the name "Kay") joined the company and quickly worked his way up to the top. By 1928, Kuhrmeyer had bought the company and that same year the company started producing electric guitars and amps.

Here we have a matching quad of late sixties Goodman speakers with green labels 25 Watts each @ 12 ohms Very rare in that EACH driver is fully functional, the cones are nice and stiff, no cone rub or any tears, just a killer set of vintage speakers. These came out of a wem cab and were also stock in laney cabinets(think sabbath tone, wem, Burman and Selmer gear Wem used odd impedances, these read 10.01 ohms on my multimeter so is treat them as 8ohms if they are wired up in a cab series parallel. Postage in the U.K. is £32 and they will be sent out in two separate parcels, you will have to arrange your own courier if your not U.K. based you can also collect in person! Any questions just ask

Peavy amps are especially well appreciated by the metal community, thanks to their good overall reliability and the high volume of sound some models produce. The 6505 Series is a favorite of metal guitarists due to its power and versatility. This is most often used as a head for double stacks of speakers, but it can also be purchased as a 2×12” and 1×12” combo for convenience.

Unfortunately, not many reference materials are available to document in complete detail, but we can hit some of the highlights, and illuminate a number of relationships along the way. If you have catalogs, ads or pictures of guitars that can help fill in some of the blanks, please let me know (Michael Wright, PO Box 60207, Philadelphia, PA 19102).

If you're a beginner, you'll love an option like the Yamaha RBX170 Bass or the Epiphone Thunderbird IV Bass. These bass guitars offer great tone and style all at a price you can easily afford. Best of all, their durable construction will withstand all the paces an eager learner will put them through. Maybe you're already an established player and are looking for a new challenge? If that's the case, you'll love the American Deluxe Jazz Bass V 5-String Electric Bass from Fender. This beautiful five string is loaded with updated electronics and Noiseless pickups for a tight low-end response you're definitely going to appreciate. Its alder body helps to give it a wonderfully clear tone that any bassist will want to hear every time they strap in. You'll also find acoustic basses in this section such as the EAB Acoustic-Electric Bass from Dean and the stunning A5 Ultra Bass Fretless SA 5-String Acoustic-Electric Bass Guitar from Godin. These basses are perfect for performers who demand the ultimate versatility. It won't matter where you're gigging with these gorgeous basses, you'll have the freedom to play them acoustic or plug in for a louder sound that can fill larger venues. The bass has always been an unsung hero in popular music, but that doesn't mean it doesn't play a crucial note. With any of the top quality basses available here, you'll have no trouble keeping the band in the groove and having them sound tighter than ever before.
The guitar measures 41 inches in length, and it comes with a 25.75-inch scale and 20 frets for various playing techniques. You also get strong D’Addario strings for reliable performances every time, as well as enclosed die-cast gold tuners, so you never play an off note. This dreadnought guitar features a cutaway so you can easily practice finger techniques on the higher frets.

To start off our list (albeit rather difficult to choose a specific guitar first), let’s take a look at the Fender Telecaster, a high-quality electric guitar for the musician out there who is looking to improve their amateur status to accomplished guitarist. With the clear tone and quality range that the Fender brand is known to famously provide, the Telecaster is equipped with shielded body cavities meant to limit reverberation and focus in on the individual notes. The dual single-coil pickups allow the musician to vary between sharp tones and strong treble, providing a unique sound to fit various genres of interest. The flat surface of the of the fingerboard makes it easy to switch between notes and chords, while the alder wood used for the body of the guitar provides and even and bright sound. With a ‘C’ shaped design meant for comfort for long wear use, the Fender Telecaster is one of the best electric guitars for the money. The sound? Very classic, biting, and clear. You’ll have to hear for yourself in this Telecaster video, since we can’t really find adjectives to truly portray this beauty.
Gate – A dynamic effect that cuts off or lowers the volume of the output when the input is below a certain volume threshold. Once the input reaches the threshold the gate opens and allows the entire signal through. This is handy when placed in an amplifier’s effects loop for helping to eliminate hiss caused by high gain distortion when the guitarist is not playing.
The Headload may be the ultimate tool for gigging electric guitarists. It has the same features as the JDX 48, but allows the player to adjust the phase of their signal to be matched with a microphone and comes with equalization controls to further sculpt the sound of their direct signal. Most importantly, the Headload is a “load-box”, meaning that it can absorb the energy of the amp’s head and produce a lower volume through the amp’s speakers. This is crucial, since most guitarists only like the sound of their amp when it is driven hard at high volumes. Unfortunately, amps being pushed to their full volume is not as enjoyable for the audience. The Headload also allows guitarists to play through their favorite sounding amp heads without even needing guitar cabs!
Being a grand auditorium body shape guitar, it’s a little smaller than the typical dreadnought size that we’ve covered several times on our list. That’s no bad thing, and allows this guitar to be nice and flexible, especially when combined with the ‘Expression’ electronics system that allows for some good tonal customisation. Match up with an effective wireless instrument system.
As an example of pre-distortion EQ, Eddie Van Halen places a 6-band MXR EQ pedal before the Marshall amplifier head (pre-distortion EQ). Slash places a Boss GE-7, a 7-band EQ pedal, before his Marshall amp. This technique is similar to placing a Wah pedal before the amp's preamp distortion and leaving the Wah pedal positioned part-way down, sometimes mentioned as "fixed wah," (pre-distortion EQ), along with adjusting the amp's tone controls (post-distortion EQ).
Early valve amplifiers used unregulated power supplies. This was due to the high cost associated with high-quality high-voltage power supplies. The typical anode (plate) supply was simply a rectifier, an inductor and a capacitor. When the valve amplifier was operated at high volume, the power supply voltage would dip, reducing power output and causing signal attenuation and compression. This dipping effect is known as "sag", and is sought-after by some electric guitarists.[46] Sag only occurs in class-AB amplifiers. This is because, technically, sag results from more current being drawn from the power supply, causing a greater voltage drop over the rectifier valve. In a class-A amplifier, current draw is constant, so sag does not occur.
Epiphone is regarded as one of American’s oldest and most revered musical instrument manufacture, which was founded in 1873 by Anastasios Stathopoulos. Their headquarters located in  Nashville, Tennessee, United States. Their produce amplifiers, mandolins, banjos, effect units etc. The company is owned by Gibson Guitar Corporation. Their guitars are the best selling one in Indian market. Available at Rs. 13,000/- onwards (approx). For more details, visit Epiphone.com.
Effects units are available in a variety of formats or form factors. Stompboxes are primarily used units in live performance and (in some cases) studio recordings. Rackmount devices saw a heavy usage during the later 20th century, due to their advanced processing power and desirable tones. However, by the 21st century, with the advant of digital Plug-Ins and more powerful Stompboxes for live usage, the need and practicality of rackmounted effects units went down, and as such, prices of rack effects have diminished due to lower usage.[5] An effects unit can consist of analog or digital circuitry or a combination of the two. During a live performance, the effect is plugged into the electrical "signal" path of the instrument. In the studio, the instrument or other sound-source's auxiliary output is patched into the effect.[6][7] Form factors are part of a studio or musician's outboard gear.[8]
It's amazing how this relatively new company, which officially started in 2007, is now playing with the big boys. Blackstar has a pretty straightforward claim to fame, and that is to provide premium quality high-gain tone in the price ranges that they enter into. And judging from the very positive response of rockers and metal heads, they are doing their job really well. As usual, artist endorsements play a big role, and Blackstar has big name backers like Neal Schon from Journey, Richie Sambora, Ted Nugent and Sammy Hagar to name a few, along with a long list of up and coming guitarists from rock and metal bands. While they still excel in providing high-gain tones, Blackstar amps also offer versatile overdrive and distortion flavors, thanks to the company's innovative ISF (Infinite Shape Feature) technology, which lets you change the tone of your amp from American to UK flavors with just one knob.

“Take a humbucker wound with 42-gauge wire as a benchmark. With an Alnico II magnet, it would have a warm, soft bass response, a very sweet high end and a slightly pronounced mid- range. Alnico III, funnily enough, is not quite as strong as Alnico II. So, the highs tend to be more muted and rounded. Probably the best way to imagine the sound of Alnico III is to think of the early 1950s when this form of magnet was very common. Think of the sounds of the jazz and clean guitar tones from that time – that plummy roundness.
In addition to the Valvetronix, Vox has developed a line of analogue effects pedals. Dubbed Cooltron, the line provides guitarists with vintage sounding overdrive, compression, boost, distortion and tremolo. The pedals use low-power 12AU7 tubes to create vintage soft-clipping preamplification. Two of the Cooltron pedals, the Big Ben Overdrive and the Bulldog Distortion, won the Guitar World magazine Platinum Award.[3] Cooltron pedals:
Japanese classical guitarist Shiro Arai founded the Arai Co. in the 1950s as an international importing company, which expanded to manufacturing in the 1960s adopting the "Aria" brand name. The explosion in popularity of the electric guitar in the 1960s led them to begin manufacturing and distributing several different brands, Lyle being one of them. Arai attended the NAMM trade show and saw many of the American guitar designs that had attained popularity in the U.S. This greatly influenced Arai to produce similar models.
It also includes a -6dB/oct low-pass filter that’s built into the plugin’s tube/valve modeling equation, and can imitate a lower-quality tube triode.  There’s a switchable output saturation stage, which can be used to overdrive the output signal and all the standard Voxengo plugin features, such as full multi-channel operation, channel routing and built-in oversampling. It’s great for guitars and for dirtying up sounds such as vocals, drums or synths.
{ "thumbImageID": "Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst/H79035000002000", "defaultDisplayName": "Epiphone Limited Edition ES-335 PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ebony", "sku": "sku:site51321473136598", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "699.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Ebony-1321473136598.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Ebony/H79035000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-ES-335-PRO-Electric-Guitar-Ebony/H79035000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51321473136438", "price": "379.99", "regularPrice": "499.00", "msrpPrice": "765.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst-1321473136438.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst/H79035000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst/H79035000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51321473136578", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "699.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Natural-1321473136578.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Natural/H79035000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-ES-335-PRO-Electric-Guitar-Natural/H79035000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Cherry", "sku": "sku:site51321473136388", "price": "379.99", "regularPrice": "499.00", "msrpPrice": "765.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Cherry-1321473136388.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Cherry/H79035000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-ES-335-PRO-Electric-Guitar-Cherry/H79035000001000-00-60x60.jpg", "imgAlt": "" } ] }