Some people just need to play loud. It’s all they know and it’s all they want to know. If that’s the case, you might want to invest in some acoustic foam, and begin to soundproof your practice space. This will not only keep the sound level to a minimum for people in the other rooms, it will also represent the first step in transforming your space into a legitimate in-home studio.
PRS S2 Vela comes as one of the more extraordinary models in this company’s lineup. This is made apparent by the body shape that stands out from their usual designs. When I had some one-on-one time with this axe, it left a good impression. One thing that really stuck with me was just how light it was. That usually means a thinner tone, but not with this PRS. It plays great, and is pretty smooth.

Often, multi-effects pedals and processors can be more cost-effective than purchasing multiple stompboxes. They also avoid the potential noise and tone-degrading impact of chaining numerous individual pedals together. That said, many guitarists prefer the way certain dedicated pedals sound or operate, and will collect many single-effect stompboxes along the way. If you are looking at purchasing multiple effect units but don’t have any favorites, purchasing a multi-effects processor can be a money-saving alternative.
The Perform page allows for editing articulations, adding effects like pedals, and adjusting parameters like monophonic mode, round robin, and the special tapping mode. The Fretboard page displays parameters for the virtual guitarist, such as hand size and fret preference; these parameters are translated into real behavior for the string selection algorithm, mapping MIDI notes to frets and strings intelligently.
Your signal chain starts at your guitar and passes through each cable and pedal until it reaches your amplifier, the speakers, and finally your ears. If you use a collection of dedicated effects stompboxes, you will be faced with a perennial question raised by guitarists: what is the best way to connect these units into a single signal chain that is easy to set up and won’t degrade your tone.
I'm trying to determine the worth of a korean made fender telecaster. Solid ash,butterscotch blonde,maple neck,abalone inlays,seymour duncan pick-up(the other 1 is silver?)classic bridge.It's probably about 5 or 6 years old,it seems nicer than any mexican I've seen. Serial # 04041144 I paid $500 and I want to sell but don't want to be unfair to self or buyer.Help please-QUICK.
Flat tops from 1970 to present are considered to be excellent utility instruments, but are not collectible. Staring in 1976, Martin has been undergoing many changes with numerous reissues, new models, limited editions, etc. Workmanship has improved greatly from the early 1970's, and Martin is now producing some of its best guitars in over 20 years. While not currently collector's items, these intruments have excellent workmanship, sound, and playability.
Octave effects take the input signal and produce synthesized tones that are one or more octaves above or below it. They can be blended in with the input signal to harmonize with it in real time. The effect can be synthesized by monitoring the waveform of the input and multiplying or dividing the observed frequency by, for example, 2 (to go up or down an octave) or 4 (to go up or down two octaves). This takes advantage of the fact that tones that are an octave apart have a 2:1 frequency relationship; the frequency of the tone one octave higher than a root tone is always double the frequency of the root tone.
Harmony was founded in 1892 in Chicago by Wilhelm J.F. Schultz. Sears acquired them in 1916. Harmony made guitars for others under many names, some of which they acquired from other companies due to bankruptcies. These include Oscar Schmidt, Stella and the Sears brand Silvertone. Harmony went out of business in 1985. A new company is currently selling guitars under the Harmony name – many of these are classic Harmony designs such as the Harmony Rocket electric guitar.
It's interesting how one of the biggest brands in guitar amplification was built by a drummer! The story goes that professional drummer Jim Marshall was inspired by Pete Townshend, Ritchie Blackmore, and Big Jim Sullivan to develop a louder and better sounding amp. And he went about it by looking at a popular American amp design (i.e. Fender Bassman) and finding ways of how to improve it. After many prototypes, Jim and his team eventually came up with an amp that had their own "Marshall sound", this amp inherited the JTM label, an abbreviation of Jim's and his son Terry's names. The rest as they say is history, with Marshall being one of the most familiar amplifier brands, even to none musicians. Their brand is still the amp of choice for a long list of virtuoso guitarists, including Jimi Hendrix, Jeff Beck, Eric Clapton, Jimmy Page, Slash just to name a few. While their vintage and professional level amplifiers are still very much in demand, the company is not doing as great in the entry level to mid-tier market - which really is the bulk of where sales and reviews of come from. Still, their fans gave them enough good feedback to make it to this list, thanks to the improvements they are making to their entry level line of amps.
The 75 Watt Fender Rumble 75 Bass Combo Amp and its 150 Watt and 300 Watt counterparts can produce an overdrive effect by using the gain and blend controls, giving overdrive sounds ranging from "mellow warmth [to] heavy distorted tones".[27] The Fender SuperBassman is a 300-watt tube head which has a built-in overdrive channel. The Fender Bronco 40 includes a range of effects including modern bass overdrive, vintage overdrive and fuzz.
DISCLAIMER: Hoshino owns the copyright to all of the catalogs scanned in here. This website has NO RELATIONSHIP with the Hoshino Gakki Group and makes no claims to ownership of the linked scans. These catalog scans are provided solely for personal academic/research purposes, so that collectors and others who own one or more of these fantastic guitars can properly identify the model and year of manufacture.
Excellent information. There is so much more to discuss on this topic. I built an Explorer shaped guitar with Strat hardware and humbucking pickups. I love the dive bombing note bends and the fat sound of humbucking pickups. I used Koa for the body and the neck came from a '70's Hagstrom electric. REALLY, thin neck. Read about guitars. See what artists like to play and why. Then fit it to your needs / wants. Brian May's Red Special uses wiring techniques I never heard or thought of. And he and his Dad made that guitar. Les Paul invented the guitar with the same name. Read about him and what he wanted. The ideas are out there to expand on. My Les Paul has 2 volume controls and a common Bass and Treble control. Different way of thinking. And it works for me.
i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.
In terms of sounds, jazz requires a balance of warmth and clarity. While many solid body guitars can do an approximation of a jazz sound using a clean tone played through the neck pickup, in reality a dedicated jazz guitar will offer this particular sound without becoming overly woolly when lines are played at any speed. Let’s take a look at our pick of the 5 best jazz guitars.
Aside from what brands to choose from and finding out the right budget to spend on an amp. Initial search for a guitar amplifier generally leads beginner players on figuring out that there are actually different types of guitar amps in the market. This is where they start to care deeply enough to know which amp sounds better and what will fit their playing the best.

This is an interesting one - by fitting a MIDI pickup to your guitar you can record your performances as a MIDI track as well as live audio. This can then be assigned to any software or hardware MIDI-triggered instrument to double up or even replace the guitar part. Some DAWs now also allow the extraction of audio to MIDI data from a recorded audio part, but the MIDI pickup route is more accurate where electric guitar is concerned.
MY kid brother has been playing drums since he was a kid , until I snuck him into a bar at 15 one night and he set in with the house band , he played all my music. He was good so he & the lead guitarist clicked & they released a CD that took off & then the guitarist was killed , my brother got a doctorate in music and has played on several good CD's , MTB being but one. he can now play nearly everything and has released two more CD,s ,and owns his own studio , me I'm only an electrician but I understand Harmonic heating in electronics . its right that a watt is a watt,& it's a way to measure power & its sold in kilowatt hours, but even though a watts is a watt when measured, its a measurement of energy , it still depends on how it's used as to how far it goes or what you get from it ,it has a lot to do with how clean or distorted it is as to how loud it seems , people will perceive it differently , the only way to find to find how loud ? a decibel meter, another measurement .

He has a way about him that makes you stop and listen, but he isn’t in your face. His sound is very melodic, which is why his tone was so perfectly matched to answering the needs of the vocals, yet he still holds his own in every tune. Bright, confident and edgy, he is a serious guitar-player and he has no intentions of holding back! People often say that he carries humour in his music, which is quite a clever characteristic to portray with this piece of equipment.
All beginners and intermediate instruments are expected to have some notable accessories that will aid the paying process, and the LyxPro didn’t disappoint in this regard. It comes with all the necessary tools that will aid your playing right away, and these include; tremolo bar, 2 picks, shoulder straps, and carrying bag for proper storage and comfort.
Epiphone was once among the most significant competitors of Gibson. Later on, Gibson acquired them and, now, Epiphone form sits budget-friendly. However, the popularity of Epiphone as one of the best electric guitar brands was always there owing to their affordability and near to top-notch quality. Thus, choosing an Epiphone Les Paul guitar doesn’t mean you have to compromise much on the tone and specs. In fact, you get a guitar with specs comparable to Gibson – that too – on a much cheaper rate.
In 1928, the Stromberg-Voisinet firm was the first company to sell an electric stringed instrument and amplifier package. However, musicians found that the amps had an "unsatisfactory tone and volume, [and] dependability problems", so the product did not sell well. Even though the Stromberg-Voisinet amp did not sell well, it still launched a new idea: a portable electric instrument amp with a speaker, all in an easily transported wooden cabinet. In 1929, Vega Electrics launched a portable banjo amplifier. In 1932, Electro String Instruments and amplifier (this is not the same company as Stromberg Electro Instruments) introduced a guitar amp with "high output" and a "string driven magnetic pickup". Electro set out the standard template for combo amps: a wooden cabinet with the electronic amplifier mounted inside, and a convenient carrying handle to facilitate transporting the cabinet to rehearsals and shows. 1n 1933, Vivi-Tone amp set-ups were used for live performances and radio shows. In 1934, Rickenbacker launched a similar combo amp which added the feature of metal corner protectors, which keep the corners in good condition during transportation.[1]
You might be playing guitar in a cramped garage or a poky bedroom – but it’ll sound like you’re gigging a cathedral when you step on a quality reverb pedal. Reverb brings a sense of space, depth and drama to even the most basic guitar parts, and as this video shows, few effects deliver more atmosphere for less effort. Using the BOSS RV-5 as our demo model, we’ll show you just how flexible reverb can be, running through key controls that adjust brightness, volume and more. Then, we’ll show how your playing can benefit from three different reverb types, whether that’s the vintage sound of spring reverb, the rock-club chug of room reverb, or the stadium-sized shimmer of hall reverb.
“Take a humbucker wound with 42-gauge wire as a benchmark. With an Alnico II magnet, it would have a warm, soft bass response, a very sweet high end and a slightly pronounced mid- range. Alnico III, funnily enough, is not quite as strong as Alnico II. So, the highs tend to be more muted and rounded. Probably the best way to imagine the sound of Alnico III is to think of the early 1950s when this form of magnet was very common. Think of the sounds of the jazz and clean guitar tones from that time – that plummy roundness.
A common complaint with the Bullet Strat among our panelists was that the single-coil middle and neck pickups buzzed too much. This is the nature of single-coil pickups. The nice thing about the HSS Bullet Strat is that you do have one humbucker, and setting the pickup selector to combine the bridge and middle or middle and neck pickups will also cancel the buzz. Also, the use of a single-coil pickup in the neck position makes it difficult to get the mellow, jazzy tones that you’ll get from guitars that have a humbucker in the neck position, but we figure few beginners are looking for that sound.
Then, one weekend his combo got the biggest gig of its career – opening for Tommy Dorsey and his orchestra. Charlie was hot that night, and Dorsey took notice. In one of those rare coincidences, Dorsey’s guitar player had just quit, and the next day Kaman was offered the job. Which path does the son of a construction foreman pursue? The uncertain, fleeting glory of the entertainment industry, or the unknown possibilities of putting craft in the air?
Shortly thereafter, the American instrumental rock band The Ventures asked their friend, session musician and electronics enthusiast Orville "Red" Rhodes for help recreating the Grady Martin "fuzz" sound.[18] Rhodes offered The Ventures a fuzzbox he had made, which they used to record "2000 Pound Bee" in 1962.[19] The best-known early commercial distortion circuit was the Maestro FZ-1 Fuzz-Tone, manufactured by Gibson, released in 1962.[20]
When jazz guitarists play chords underneath a song's melody or another musician's solo improvisations, it is called "comping", short for "accompanying" and for "complementing".[citation needed] The accompanying style in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In many popular styles of music, such as rock and pop, the rhythm guitarist usually performs the chords in rhythmic fashion which sets out the beat or groove of a tune. In contrast, in many modern jazz styles within smaller, the guitarist plays much more sparsely, intermingling periodic chords and delicate voicings into pauses in the melody or solo, and using periods of silence. Jazz guitarists commonly use a wide variety of inversions when comping, rather than only using standard voicings.[3]
He may have spent much of his Guns n' Roses prime shirtless, drunk and surrounded by snakes, but Slash brought good taste and restraint back to hard-rock guitar. "It was a stripped-down rock & roll sound compared to what everybody else was doing," says Slash. He could riff like Joe Perry, and intertwine, Stonesstyle, with Izzy Stradlin. And lyrical solos like the from-the-mountaintop grandeur of "November Rain" were permanently laced into the songs' fabric. "It's hard to play those solos any other way," says Slash. "It will sound wrong."
4. Vox VT40X 40-watt 1x10 Combo Amp ($249.99): The Vox is another modeling combo that utilizes a Valvetronix tube preamp to give you the sound qualities of a tube amp. With 13 onboard effects, you can channel quality effects without having a pedalboard at your disposal. Vox’s Virtual Elements Technology has allowed them to carefully recreate up to 20 realistic models of very sought-after amp tones, all within an attractive looking package.
The overall design of the JS11 Dinky is a streamlined and straightforward, it is basically a less contoured version of the Dinky with cost-effective parts, assembled and built overseas. But don't count it out yet because many found it to exceed their expectations in terms of looks and tone. The 25.5" scale maple neck, flat 12" radius fingerboard and 1.6875" wide nut also makes it a pleasure to play, and have made life easier for both students and experienced players alike. The high output Jackson designed humbuckers are also good enough for high gain playing, although most got great results by switching them out.
The origins of the modern guitar are not known with certainty. Some believe it is indigenous to Europe, while others think it is an imported instrument.[32] Guitar-like instruments appear in ancient carvings and statues recovered from Egyptian, Sumerian, and Babylonian civilizations. This means that the contemporary Iranian instruments such as the tanbur and setar are distantly related to the European guitar, as they all derive ultimately from the same ancient origins, but by very different historical routes and influences.
This is a Japanese Fender Jaguar electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This amp gives a really nice full clean sound. I have recorded it on the edge of break up so the low velocity samples come out clean and the high velocity samples come out with a bit of nataural power valve distortion. You can add more distortion with effects if you need it dirtier. It is hard to get this natural break up sound with effects which is why I have recorded it that way and if you add distortion it still has the natural bite of a valve amp (except with more distortion). This makes it very expressive just by the difference in tones at different played velocities. The lowest velocity is muted samples. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them. The sound is suited to a lot of types of music. These guitars have been used for all sorts of music over the years. It has not much sustain and makes a bright clean sound.
YP - The Real Yellow PagesSM - helps you find the right local businesses to meet your specific needs. Search results are sorted by a combination of factors to give you a set of choices in response to your search criteria. These factors are similar to those you might use to determine which business to select from a local Yellow Pages directory, including proximity to where you are searching, expertise in the specific services or products you need, and comprehensive business information to help evaluate a business's suitability for you. “Preferred” listings, or those with featured website buttons, indicate YP advertisers who directly provide information about their businesses to help consumers make more informed buying decisions. YP advertisers receive higher placement in the default ordering of search results and may appear in sponsored listings on the top, side, or bottom of the search results page.

At least one other Teisco guitar was available from around this time in the ’50s, probably slightly later on � another mini Les Paul that was the ’50s piece de resistance, the J-5. The J-5 was a single-cutaway solidbody that went beyond the other more derivative LPs. This had a slightly elongated body shape, with less pronounced waist than a traditional Les Paul. The upper bass bout headed toward the neck with a more angular, almost pointed corner rather than the typical rounded shoulder. The cutaway horn was also more angular, heading out at almost a right angle to the neck. It’s impossible to tell from the photograph, but this looks to be a glued-in neck. The fingerboard was bound, and featured the typical large white dots with two small dots at the octave. The headstock was a white-faced asymmetrical affair, with a curved peak extending on the bass side, with a concave dip across the top. Tuners had white rectangular buttons. These would be interesting enough, but the body had a bound flamed maple top � flat, not carved. The pickguard followed the body profile, with an extension down the lower side for the volume and tone controls. On the black pickguard were two black-covered pickups, looking sort of like P-90s. Pickup selection was with a chicken-beak rotary three-way switch. Knobs were white knurled with silver top rings. The bridge was a typical adjustable wooden type. Again, a large tailpiece assembly allowed the strings to pass through the body. This is a very beautiful guitar.
Finding spare parts for vintage guitars is not always easy. Manufacturers come and go, very often changing specifications throughout the course of a guitar's production; identifying exactly the right specification part can be very difficult indeed - but we aim to help you find the correct part for your instrument. We have many years experience in restoring vintage musical instruments: if you need help, please do get in contact.

But older guitars are not always better than new guitars; they can have unreliable parts, or be difficult to maintain. A lot of these are upgraded to make great players grade instruments. Keeping the essence of the original vintage guitar, but adding a little of today's reliability. A great example is the 1960s Gibson Melody Maker; an all-mahogany set neck guitar with Brazilian rosewood fingerboard and beautiful nitrocellulose finish. Well-built by Gibson, in their Kalamazoo factory, but with very basic pickups, tuning keys and electronics. Upgraded examples are everywhere, and are exceptional value as players grade instruments. Then again some guitars, especially early Japanese and European models aimed at the student guitarists of the early 1960s are completely unplayable. Even the cheapest modern day guitars put these to shame. Before buying any vintage guitar it is a good idea to know exactly what you are buying!
Slash is a longtime fan of legend Seymour Duncan’s hand-wound pickups, and for his new Epiphone Firebird, Slash choose custom Seymour Duncan "Slash" open coil-humbuckers for the rhythm (APH-1) and the lead positions (APH-2). These were Slash’s first custom pickups made with Seymour Duncan and feature Alnico II magnets and are slightly overwound for a boosted output. Each pickup has a single conductor cable, a long-legged bottom plate, and a wooden spacer. Controls include individual Volume and Tone pots with traditional Black Top Hat knobs with metal inserts and pointers along with a Switchcraft 3-way Toggle switch. Tone controls for both pickups also feature Sprague "Orange Drop" capacitors (0.022uF, 600V, 5%), the same capacitors Slash uses on his custom designed Les Pauls.
Read Full Review If you’re looking for a lightweight guitar aside from a Stratocaster. You prefer the quality of tone produced using humbuckers than a single-coil can deliver. This SG model from Epiphone meets that requirements on the overall sound, playabilty and price that fits the under two hundred dollar budget of a beginner. As well as for seasoned players looking at the market for an affordable studio or back-up guitar to bring on stage.
Though the guitar is black, the wood for the top is spruce, with meranti back and sides, and a rosewood fretboard and bridge. This is a full-size guitar (52mm nut), though there is a 7/8” size available. The only thing is, with the 7/8” size you won’t be able to get the black color. The one thing in common between the two is the gloss finish, as well as the types of wood used.
{"eVar4":"shop: accessories","eVar5":"shop: accessories: fretted instrument accessories and parts","pageName":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: fretted instrument accessories and parts","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"electric guitar pickups","prop5":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","prop6":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","prop3":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups","prop4":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category4"}
{ "thumbImageID": "ABT610E-Baritone-Acoustic-Electric-Guitar-Shadow-Burst/J57125000001000", "defaultDisplayName": "Alvarez ABT610E Baritone Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000217496", "price": "399.99", "regularPrice": "399.99", "msrpPrice": "649.00", "priceVisibility": "1", "skuUrl": "/Alvarez/ABT610E-Baritone-Acoustic-Electric-Guitar-Black-1500000217496.gc", "skuImageId": "ABT610E-Baritone-Acoustic-Electric-Guitar-Black/J57125000002000", "brandName": "Alvarez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Shadow Burst", "sku": "sku:site51500000054240", "price": "349.99", "regularPrice": "399.99", "msrpPrice": "649.00", "priceVisibility": "1", "skuUrl": "/Alvarez/ABT610E-Baritone-Acoustic-Electric-Guitar-Shadow-Burst-1500000054240.gc", "skuImageId": "ABT610E-Baritone-Acoustic-Electric-Guitar-Shadow-Burst/J57125000001000", "brandName": "Alvarez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
It is traditional to think that learning guitar initially involves learning lots of chord shapes. I agree that this can be a distraction, and for me, it made the guitar seem more complicated than it is. As well as (or instead of) learning lots of chords 'by rote', an alternative would be to learn a few scales, and learn how to construct chords from those scale shapes.
Though the line between the two is easily smudged, where multi-effects processors create a broad spectrum of effects, modeling processors can recreate the sound of particular instruments and amplifiers, like a Gibson Les Paul played through a stack of Marshall amplifiers, or a Fender Stratocaster played through a Fender Deluxe Reverb amplifier. A modeling processor offers you the ability to make your guitar and amp combination sound like whatever guitar and amplifier sound you want—even if you don’t own either guitar or amplifier. You are limited only by the number of models programmed into the modeling processor when you plug your guitar into one.
Perry has also endorsed an affordable replica version of the Boneyard guitar made by Epiphone that carries the same USA made Burstbucker pickups as the Gibson model. It is a customized Gibson B.B. King “Lucille” guitar; however, instead of the black finish and “Lucille” signature on the headstock, Perry’s guitar features a white finish, a “Billie Perry” signature on headstock and an image of Billie Perry on the front of the guitar.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Sunburst, Amber
The Pro Series DK2 is a rugged, performance-grade workhorse that’ll do just as well on the stage as in the studio. It has a lightweight okoume body—a tonewood that shares many qualities with mahogany—as well as Jackson’s fast maple ‘speed neck,’ a compound radius ebony fretboard and 24 jumbo frets. A recessed Floyd Rose 1000 double-locking trem system completes the shred-friendly features on the guitar.
Squier model Telecasters are sold by Squier, a Fender-owned import brand. These can bear the Telecaster name, since Squier is owned by Fender. Squier guitars, especially the Telecasters, have gained popularity[citation needed] and a good reputation amongst guitar players,since it has expanded its production of guitar models.For example a 1989 Korean Squier Telecaster made in the Samick factory could be considered tonally superior[citation needed] to a modern American produced guitar besides necks being more comfortable in general.Template:Citation neede Squier has a wide range of different Telecaster type guitars available, from the entry-level Affinity Series to the better quality Standard and Classic Vibe Series. However, Standards are often used by beginners. Also available are the Artist Series and Vintage Modified Series. Among other famous musicians, Sheryl Crow has occasionally used a Squier Telecaster for recordings and live performances.[4][dead link]
The Pacifica family of guitars was launched years ago to address this market in particular. They’re excellent guitars for the working man and student alike. After a break-in period, these machines should provide stable, frustration-free operation for many years, with enough tone and versatility to play any style. The video below even demonstrates how, with a solid amp, you might not even know it was inexpensive.
Other notable effects include the tube-driven Leslie speaker series, which originally modified the sound of electric organs (such as the Hammond B3) until guitarists like George Harrison (and the Beatles more generally) began to use it for spacey chorus, tremolo, and phaser tones. The classic 60s model, the Leslie 122, was housed in a huge 41-inch wooden laminate casing and comprised of two motors (essentially two electromechanical horns) that had been rotated to create a Doppler-effect-based vibrato. These horns were, in turn, picked up by the dual speaker units. The Leslie 122 wasn’t even built to connect to a guitar, but bull-headed technicians fudged the electronics and made it work anyway. The laminate wood wasn’t just for aesthetics, either: It functioned as a partial enclosure, ensuring mellower tones, and different woods created different vibratos. respects the intellectual rights and property of the owners, luthiers and salespeople at the Rickenbacker, Gretsch, Gibson and Fender Guitar Corporations. Registered trademarks/designs of these corporations include, but are not limited to, 325, 330, 360, Jetglo, Stratocaster, Flying V. is not affiliated with these corporations in any way. The guitars above represent instruments built in Japan for the Japanese domestic market only. They are no longer being made or distributed, which makes them rare. This page was created for collectors and enthusiasts; for the sole purpose of providing information, photo documentation and research tools.
A neat recording solution for when you want the sound of a speaker running flat out, but without being thrown out of your flat by your neighbours!A practical method endorsed by those engineers who don't like to leave their comfortable chairs too often is to combine the above techniques by using two close mics, one on-axis and one off-axis, plus one distant mic a few feet from the cabinet. If the close mics have very different characteristics, for example a capacitor mic on-axis and a dynamic mic off-axis, you'll get an even greater choice of tonality, as you can vary the mic balance being recorded. Switching the phase of individual mics can often yield interesting combinations and, if you really don't want to leave that chair, you can also delay the ambience to increase its effective distance when it is combined with the other mics. Each millisecond of delay is roughly equivalent to 12 inches of added distance.
The so-called modeling amps can be said to differ from both tubes and solid state ones as they employ modern processing technology to apply preloaded characteristics to the sound. This can alter the output in a variety of ways, from imitating certain classic styles to rendering something entirely new. Needless to say, they are favored by cover bands and electronic music fans, but many guitarists don’t appreciate their “artificial” sound, although they can serve as good practice amps.   
The C3M comes with Savarez Cristal Corum high-tension strings, but you can always change them out for something different if you prefer. Aesthetics-wise, the guitar has a matte finish (the “M” in the model name), but it really has no bearing on the way the guitar sounds.All the same, you’ll want to protect your guitar from nicks, cuts and other damage.
Back in the control room, audition each mic, preferably as the guitarist plays along with the other instruments. Listen carefully to how each microphone sounds on its own and, more importantly, to how it works in the mix. Usually, one microphone will come up a winner on the first pass. Don't stop there, however. Instead, leave the "winning" microphone where it is and experiment with the placement of the other two mics. Time-and mic selection-permitting, you may also wish to do a second round of testing with other microphones.
Most delay pedals have controls for the number of repeats (called “feedback”), the volume of the repeats and the time between each repeat. Some pedals have what’s called “tap tempo”, where you can tap your foot on the pedal and the delay unit will match the speed of the effect to your foot, allowing you to match the delay time to the tempo of a song. Delay pedals are often used to thicken up heavy lead guitar sounds, or to subtly add more to a simple rhythm guitar part.

Now, let’s consider the tone knobs. Eric Clapton was one of the first guitarists to realize the power within those unassuming plastic spinners. His famed “woman tone” sound during Cream relied on rolling the pots on his Gibson Les Paul Standard, SG or ES-335 all the way off and turning the treble and midrange of his superbly overdriven Marshall amps high. Similarly, jazz guitar players who are looking for a classic tone roll their pots back until they get in the Wes-Benson-Burrell-Pass-etc. zone.
Scott Walker began tinkering with electronics at an early age. In his early teens he began playing guitar and experimenting with pickups. In the Spring of 2001 he attended the Roberto-Venn School of Luthiery.  Following graduation he accepted a job with luthier Richard Hoover, of Santa Cruz Guitar Company. At Santa Cruz Guitar Company his specialty became hand-carving necks, and he also began to take on other responsibilities, including the position of shop foreman. At this time he began developing an electric guitar for the ‘21st century.’ After meeting musician Barry Sless, he began to develop an instrument that had the broadest tonal range available. After five years of R&D he began offering his guitars to the public. During his pursuit to develop an electronic package to incorporate into these instruments, he began working with electronic wizards Peter Miller and John Cutler. This collaboration resulted in the current design now found on all ‘Walker Guitars.’  For more information please visit:
A seasoned guitarist, however, makes use of restraint at the high end of the spectrum. What to an amateur sounds muffled and buried by the drums is actually the guitar sitting in its proper place in the mix, assuming the role of a rhythm instrument. When it is time for the guitar to jump forward, in a lead part for example, power and contrast can be now gained by unleashing a bit more treble. Here you can use your pickup selector, tone knob, volume knob (which also functions as a mild treble cut as it is rolled back), or a pedal such as an equalizer or overdrive.
Description: Body: Mahogany - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Maple - Frets: 24 - Inlay: None - # of Strings: 6 - Scale Length: 27" (69cm) - Headstock: 7 In-Line, Reverse - Bridge: Floyd Rose Style Locking Tremolo - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, Grover Tuners - Circuit Type: Active - Pickups: EMG 707 - Pickup Configuration: H-H - String Instrument Finish: Tribal Purple, Black flame, Tribal Green, Blue Quilt, Satin Natural, Blue Flame
Thanks for your note, Ed. I try and be terribly clear that there’s no notion of 1 being higher than another. They’re simply completely different, and it’s a matter of preference what you wish. Nothing I’ve ever denote has gotten additional attention than this, thus despite it in all probability being futile, i’m getting to build redo of this with video likewise.
The stompswitches take a couple stomps to cut on. There also some tape residue around the led lights where someone covered them. But its not a huge issue for reverb considering that the way I play, I always have a little reverb on to add texture and presence to my tone. Also, if you have a pedal switch looper that you can run all your pedals through it can stay always on that way too. But I'm going set the bidding price lower just because they don't work 100% properly and the tape residue. Other than the issue with the stompswitches the effect works great. Just clarify, you have to stomp on the switch 2 or 3 times and it cuts on.

accessories aeolian mode analog basic chords basic guitar chords beginner best guitar brands cheap guitars chord diagrams digital dorian mode easy guitar songs effects guitar guitar amp photos guitar buying guitar effects guitar equipment guitar kits introduction ionian mode lessons locrian mode lydian mode major key major scale mixolydian mode music studio natural minor scale noise control pedalboard pentatonic major pentatonic minor phrygian mode pickups practice room recording scale diagrams soundproofing theory used guitars

DIY Pedal Kits – supplies hand made guitar effect pedal kits from the UK. All you need to complete their kits are a small number of basic tools. These are a soldering iron, screwdriver and wire cutters/strippers. In addition, needle nose pliers make things a LOT easier but they aren’t essential. Included in each kit is a pre-drilled metal enclosure, 3PDT true bypass) switches (if applicable), high-quality quarter inch jacks, all wire, solder, heatshrink, components, etc needed for the build, 2.1mm center npower supply socket and full color build guide.
John Fahey, who died in 2001 at age 61, was American folk guitar's master eccentric, a dazzling fingerpicker who transformed traditional blues forms with the advanced harmonies of modern classical music, then mined that beauty with a prankster's wit. "His music speaks of a boundless freedom," says ex-Captain Beefheart guitarist Gary Lucas. In the Nineties, Fahey switched to a spiky minimalism on electric guitar that made him a post-punk icon. "To be validated by John Fahey," says Thurston Moore, "was really special for our scene."
Yamaha is the most revered and leading manufacturer of full-line musical instruments. With its wide range of guitars, the company has become a best seller and is easily one of the best guitar brands in India. The C Series are the popular and affordable nylon string guitars by Yamaha suitable for beginners and young learners. The electric guitars of Yamaha available in India are of the Pacifica and RGX series. The Pacifica series offers the most value for money combining affordability with performance.
 You will not grow here or learn anything that will be useful in any other company unless they employ 1950's management techniques. Maybe a screenwriter for "Madmen" would find some material here but as someone trying to grow their career you won't learn anything useful. The pay will be no better than your last job minus your previous bonus and 401k match which to my knowledge they do not contribute. So next question, your not making any more money and probably less, not learning anything useful and will need to explain why you left after 6 months, how are you going to position this to beat the competition going after your next job?
Setting up an electric guitar will bring out the true potential of that specific instrument. A poorly setup guitar will be harder to play due to high strings and neck bending, and will sound subpar with improper intonation. Electric guitar setup cost will cover all of these adjustments and more. For a price close to $50, your guitar will also have its neck adjusted so that the playability is as good as possible over the entire fret board. In the ideal setup scenario, the string height will be optimized so that playing is easy. The height of the strings should also provide for the best sound as they are able to ring free of the frets, allowing for the cleanest and strongest possible signal for the pickups to capture.
Plays like a Fender, sounds like a Gibson! Absolutely amazing and incredibly versatile guitar. The pickups are really impressive, the playability is second to none. I sold my first G&L, I'll never live down the regret, so I bought another one. I haven't played a PRS yet, but I own a Fender Strat and a Gibson Les Paul, Schecter and an ESP Eclipse, but it's my that G&L gets the most play time!
Purchase the required hardware. There’s a lot of variety in terms of the looks and capabilities of the parts you’ll need for your guitar. You can choose based on the kind that existing guitars you like use, or experiment with something new. You can easily buy the equipment you’ll need from most guitar shops or online. For an electric guitar, you’ll need:[3]

Distortion pedals is responsible for many of the sounds that you think of when you think ‘electric guitar.’ It’s absolutely classic, and you’ll find that the majority of effects are some flavor of distortion pedal. The results you can get from these stompboxes vary from overdrive-like breakup to smooth melodic power, so it’s important before you take one home that you check for the type of sounds that specific distortion pedal is designed to create. Doing your homework really pays off when it comes to distortion pedals.

Leaving aside guitarists whose relative fame is debatable (such as Steve Hillage or Terje Rypdal), how can you have a wannabe like John Mayer on your list, but not Dr. Brian May, Jerry Garcia or Jeff Beck? And I’d have also swapped out Tom Morello in favor of Adrian Belew. Belew was making his guitar sound like “everything but a guitar” more than a decade before anyone had heard of Morello. Adrian played with Talking Heads, Joan Armatrading, David Bowie (that’s him playing the crazy solos on DJ and Boys Keep Swinging), and King Crimson back in thee late 70’s and early 80’s. And his song Oooh Daddy at least grants him one hit wonder status, as far as “fame” goes.
I had this guitar handed down to me. It is in pretty rough shape. I think it is in good enough shape to restore to good condition/used shape. Before I attempt such a thing I would like to know more about the guitar itself. I know the history of Lyle and "Lawsuit" guitars so that part is done. The body has a cherry red finish with 2 "f" openings. The neck has had some stress on it, enough to have the wood lift a little on its grain pattern about 2 inches long from the nut to the fret board. I am not sure if injecting glue into this will keep the neck from breaking in the future. The fret board is loose at the nut but I believe I can glue it again. This is not the first restoration I have done. I have restored a flute and a grenadilla wood clarinet. Any comments regarding how to or if I am wasting my time will be welcome.
When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).
Additionally, the instrument gets a good once-over for all other miscellaneous needs. Every Calibration & Reset is tailored to the individual player and there are never any charges for adjustment once the service is initially completed. Every Calibration & Reset is guaranteed for 60 days from completion (though typically adjustments are made well past the 60 day mark for free). No Calibration & Reset is done until you're completely happy with the way your guitar plays. The only limitations are the laws of physics, which despite our many attempts, we have yet to find ways to break.

Entitled Fine Electric Instruments, the 1964 1965 Fender catalogue was circulated from mid 1964, and despite being just eight pages long, contained a large number of guitars, amplifiers and other instruments. This was the first catalogue to show the new Fender Mustang guitar, which was available in normal or 3/4 scale at that time. This catalogue was included in the 1964 annual guitar issue of Down Beat magazine (July), massively increasing the potential readership, both in America and worldwide.
You might have previously dropped your jaw at another stunning performance taken from the same session in 2015 wherein Swift delivered a breathtaking piano rendition of "Out Of The Woods," and honestly, I can't help but feel that this is Swift in her natural element (probably thanks to her country music roots) and I want more of just her, her magnificent voice, and an instrument.
Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.
One of more commonly known effects for musicians is distortion. It falls into the family of effects sometimes referred to as "dirt" boxes: Distortion, Overdrive, and Fuzz. In simple terms, it is cutting the top and bottom of the sound wave off using a technique known as "hard" clipping to create a more square shaped wave instead of the more natural sine wave formation. A solid explanation on the techniques and methods of creating different types of distortion can be found on Wikipedia.
An acoustic-electric guitar has an electronic pickup that’s usually built into its bridge. This pickup is used to capture the sounds produced by the top’s vibrations. This is then transmitted via an onboard preamplifier to an external acoustic guitar amplifier or PA system. But plugging-in is strictly optional. Unplugged, an acoustic-electric guitar typically sounds just like a fully-acoustic guitar.
The Gruhn Guitars repair shop has been world renowned for decades for its unrivaled expertise, skill, and respectful repair practices. Though our full-time staff of luthiers primarily focuses on repairing and restoring the instruments we make available for sale, beginning in 2016 we are also pleased to offer our repair services to loyal customers as an extended benefit of buying an instrument from Gruhn Guitars. Instruments purchased from Gruhn Guitars will be moved to the front of our repair queue and will be repaired at a discounted labor rate. As a sign of our appreciation for your business, Gruhn Guitars is here to help you for years to come to keep your instrument in the same prime working order as when it was listed for sale at the shop.

As mentioned earlier, technically, magnetic pickups are small magnets with fine wire coils. These small magnets produce a magnetic field around them. When the metal strings of the guitar are strung by the user, a vibrating motion is generated inside this magnetic field which changes the magnetic flux of the field. According to the law of electromagnetism, this change in the magnetic flux produces an electric charge in the wire coil around the magnet.

A. Many professional musicians invest thousands of dollars in high-end guitars made from expensive and rare tonewoods. A $100 student guitar made from spruce is not going to produce that level of tonality regardless of the player’s skill level. As a beginner, your main focus should be on skills such as chord formation, fretting techniques, and basic scales. Improving tonality and performance are long-term goals.
Are you running it through a cab simulator? That or proper eqing. Turn up the mids and drop a high pass filter on that sucker. If you're finding it still lacking check out the KeFir cab simulator and then just use the preamp you have now. I've had wonderful results with that. If you're not liking your preamp try out The Anvil by Ignite amps. Best clean tone I've had out of freeware.
Impossible to avoid this legendary American brand founded in 1946 by Leo Fender. Even if Leo Fender was not the first man to build an electric guitar — only hollow-body and Hawaiian solid-body guitars were available back in those days ─, his first model, the Esquire that became later the Broadcaster and then the famous Telecaster, quickly became a huge success for its versatility. The Telecaster and the Stratocaster, the other famous Fender model, would become standards that have been copied many times. You can hear them in some of the most famous classic rock recordings by the likes of Keith Richard (The Rolling Stones) and Bruce Springsteen (Telecaster), or Eric Clapton and Jimi Hendrix (Stratocaster).
Fender is a guitar pioneer. Its history of making quality guitars stretches back decades. The Fender Modern Player Telecaster Thinline Deluxe is another classic by Fender. This guitar offers both sweet and aggressive tones thanks to its two MP-90 pickups. With its 9.5-inch radius, this guitar is incredibly comfortable to play. There are 22 medium-sized frets and a six-saddle hard-tail bridge. This guitar is easy to tune and stays in tune.
Okay, it is a single-cut and dates back to a similar era, but this single-cut is very different to a Les Paul. The Pro Jet has a basswood body with an arched maple top, and like many of Gretsch’s solidbody electrics, it’s chambered, making it lighter, and, they say, more resonant. It sports a pair of Gretsch’s Black Top Filter’Tron pickups, giving you a bright snap and twang that’ll cut through any mix. In short, it’s incredible. Uncanny, even. For here we are in 2018, and yet you fret a couple of doublestops on the Pro Jet Electromatic and all of a sudden it’s like you’re the Fonz, just waiting for Richie, Joanie and Chachi to show up. The cleans are sharp and jazzy, but just take your amp into overdrive and you’re in rockabilly heaven. The tone is so hot you could grill hamburgers by wafting it in front of the speaker cone. Tex-mex shuffle, country, blues, jazz, rockabilly... You name it, and it’ll play it, retro-style. if you want the versatility and the kudos that comes with a Gretsch, it’s hard to look past that finish, that build, and that tone.

In the 1920s, it was very hard for a musician playing a pickup-equipped guitar to find an amplifier and speaker to make their instrument louder as the only speakers that could be bought were "radio horns of limited frequency range and low acoustic output". The cone speaker, widely used in 2000s-era amp cabinets, was not offered for sale until 1925. The first amplifiers and speakers could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
Bring up the topic of electrics, and Martin is hardly the first name of recall. The term “electrics” is not meant to include the company’s many fine acoustic-electric guitars, many sporting top-notch electronics (which ultimately remain acoustic beasts), but rather electric guitars meant for country chicken pickin’ or raunchy rock and roll. However, beginning in the early ’60s, Martin has launched periodic forays into the electric guitar marketplace with some very interesting, if commercially unsuccessful, results (which explains why the Martin name doesn’t come immediately to mind). Most coverage of the Martin brand is focused, quite rightly, on their substantial acoustic achievements. For this essay, however, let’s take an alternative view and look at the company’s various electric guitars, its thinline hollowbodies and later solidbodies.

My first electric was a Decca, and a friend had one too. Mine was the one pickup style and his had two pickups. This was back in 1972. These were cheap but played very well and I wish I still had mine. There's one on Ebay right now that's just like the one I had, only ten bucks so far. I remember the great sustain and feedback I could get through it playing Hendrix songs!
Rackmounts are most commonly used in recording studios and "front of house" live sound mixing situations, though professional musicians who play electric bass, electric guitar, or synthesizers may use them in place of stompboxes, to create a rackmounted head unit for their speaker cabinet(s). Rackmounts are controlled by knobs, switches or buttons on their front panel, and often by a MIDI digital control interface. During live performances, a musician can operate rackmounted effects using a "foot controller".[14] By setting up effects in a rack-mounted road case, this speeds up set-up and tear-down, because all of the effects can be connected together with patch cords (which can be left connected permanently) and all of the units can be plugged into a power bar. This means that a musician only needs to plug in the main power bar into AC Mains power and plug their instrument into the rack, and the last effect unit's output into their instrument amplifier and/or the PA system.
{ "thumbImageID": "GRX70QA-Electric-Guitar-Transparent-Blue-Burst/H77128000001000", "defaultDisplayName": "Ibanez GRX70QA Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Blue Burst", "sku": "sku:site51313248770709", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX70QA-Electric-Guitar-Transparent-Blue-Burst-1313248770709.gc", "skuImageId": "GRX70QA-Electric-Guitar-Transparent-Blue-Burst/H77128000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Red Burst", "sku": "sku:site51313248770799", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX70QA-Electric-Guitar-Transparent-Red-Burst-1313248770799.gc", "skuImageId": "GRX70QA-Electric-Guitar-Transparent-Red-Burst/H77128000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Black Sunburst", "sku": "sku:site51313248770729", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX70QA-Electric-Guitar-Transparent-Black-Sunburst-1313248770729.gc", "skuImageId": "GRX70QA-Electric-Guitar-Transparent-Black-Sunburst/H77128000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
"Our expertise is to customize guitars according to the specifications of our clients. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. Our 100% satisfaction guarantee allows you to buy with confidence!"
Kay was indeed one of the earliest American manufacturers of electric guitars. Things progressed, and by 1934, the company was officially known as the "Kay Musical Instrument Company". The company became larger and more successful over the years, leading to the addition of a new factory in Elk Grove Village, Illinois in 1964. But somehow by 1965, the company had hit rough times and was bought by Seeburg, a jukebox manufacturer that sold Kay to Valco in 1967.
Early valve amplifiers used unregulated power supplies. This was due to the high cost associated with high-quality high-voltage power supplies. The typical anode (plate) supply was simply a rectifier, an inductor and a capacitor. When the valve amplifier was operated at high volume, the power supply voltage would dip, reducing power output and causing signal attenuation and compression. This dipping effect is known as "sag", and is sought-after by some electric guitarists.[46] Sag only occurs in class-AB amplifiers. This is because, technically, sag results from more current being drawn from the power supply, causing a greater voltage drop over the rectifier valve. In a class-A amplifier, current draw is constant, so sag does not occur.
One of the most important things when choosing your guitar is of course the sound - read the study on electric guitar sounds. It’s best if you’re able to try different guitars out in a music shop, and the staff there will most likely be happy to present you with different options that are good for beginners. There you will also have the chance to see how the different guitars feel to play, and have the opportunity to ask the staff if you have any questions or need any advice.
You might be playing guitar in a cramped garage or a poky bedroom – but it’ll sound like you’re gigging a cathedral when you step on a quality reverb pedal. Reverb brings a sense of space, depth and drama to even the most basic guitar parts, and as this video shows, few effects deliver more atmosphere for less effort. Using the BOSS RV-5 as our demo model, we’ll show you just how flexible reverb can be, running through key controls that adjust brightness, volume and more. Then, we’ll show how your playing can benefit from three different reverb types, whether that’s the vintage sound of spring reverb, the rock-club chug of room reverb, or the stadium-sized shimmer of hall reverb.
Great article and very enlightening comments too. One thing I’d like to add is that it seems to me that a considerably large expense is necessarily involved in going the ampless route i.e. Axe FX + midi controller at the least, in an Axe Fx setup. Granted, amp setups can be just as expensive or more expensive, but cheaper amp options are available.
Both pickups were controlled by a separate volume control, with one master tone control. Another toggle served as a coil tap. The Ripley project went nowhere, however, the body styling would reappear on the upcoming Korean Celebrity series. It is very possible, since this shared the Ultra Hard Body model designation and was made in Japan, that the mystery Japanese guitars were essentially the same.
Rarely have we come across a redesign of a classic instrument that is so thorough… yet still adheres so closely to the original! Neck shape, body contouring, hardware, pickups and electronics have all been under the microscope of Marr and his design cohorts in redesigning this short-scale offset classic. The new bridge design swaps the threaded rod saddles of the Jaguar for the bigger, solid, non-height adjustable Mustang saddles that sit flush on the bridge tray. The saddles just have a centre-placed string groove but this increased width means there's very little gap between the low E and the outer edge of the fingerboard the further up the neck you go. Marr has also ditched the traditional dual rhythm/lead concept. This Jag has just one circuit: standard volume and tone controls and a four-position lever switch mounted on the smaller of the three chromed plates. In position one, it offers just the bridge pickup; position two, bridge and neck pickups (in parallel); position three, neck pickup; and lastly position four, neck and bridge pickups (in series). We still have the slide-switch style of the original Jaguar to engage not one, but two, of the original's high-pass filters. The top switch is the master filter (up engages the cut); the lower switch, mounted at a right angle, only works on position four where forward is on (ie, it introduces the cut). Both these switches stick up less than the standard slide switches too, and are slightly more comfortable: typical of the thought and detail that has gone into this guitar. There's Fender-aplenty in the sounds but, as Marr says, Gretsch and Rickenbacker spring to mind, especially with a little tone roll-off. Above all though, the clarity, and the musical sweetness of the tones allow for complex chord voicings for jazzier rhythms or simpler soul and funk styles. The Johnny Marr Jaguar is a thorough redesign from the perspective of a very busy working guitarist. Aside from the low E being rather too close to the fingerboard edge in higher positions, it's faultlessly built for purpose, addresses five decades of 'Jaguar-ness' and puts a decidedly leftfield design squarely back in the mainstream.

I disagree. Through the years I've owned many amps and many pedals, and played with numerous setups to get different sounds. My absolute favorite setup and sound I have had is my Les Paul straight through my JCM900. At most, I'll add a wah in there. That is my ideal setup. I've played many different styles over the years, and used many techniques. My playing has evolved as I went along, and started taking pedals out of the mix. I think pedals are a great thing, and if you want to use them, you should.

• Wrap around: On wrap around tailpieces, what’s wrapping around is the string. Strings are slid into the tailpiece from the front and then pass over the back and top of the bridge before making their journey up the neck. This system creates less string tension. Some players report tuning and intonation issues with these tailpieces. Others swear by them.
One of the biggest hits of all-time, this song incorporates everything that is 80’s pop and is performed in the key of F# major, in 4/4 time. Lauper originally didn’t want to sing it since the original version was written by Robert Hazard, who wrote it from the perspective of a man. Eventually, the singer released her version of the song and the rest is history. 
This one SOLD pictured has been SOLD OUT: This is one of my favorite vintage Alvarez guitars and is always truly a very good surprise just how great these sound / impressive and I have collected more than several over the years of this very model vintage era lawsuit guitar in AMAZING Condition. Here we have a wonderful and very clean example of a Vintage Japanese Acoustic its a late 1970's great Alvarez 5056 with the most intricately detailed inlay work everywhere on the body.... the front & back in Abalone & the fingerboard is rich - dark and wavy grained it looks to be Brazilian Jacaranda Rosewood and has the Gorgeous Tree of Life in mother of pearl & abalone inlayed into the rich rosewood fingerboard WoW!,even the bridge has Mother of pearl inlaid, (you should have a real good look to come to your own conclusions if its something you like ) and the frets are in very good original condition... action is very good nice & low adjustable either way with no buzzing anywhere on the fretboard real nice playing example here folks.. The finish has a natural golden patina as seen to it and this guitar is strikingly beautiful. No cracks, no repairs, very good - excellent vintage used condition and is JVG rated at 9/10 WoW!... She's very EZ on the eyes to say the least and a premium performer this vintage piece has had over 33+ years to age and mellow and was a one owner California guitar in above better than average condition... no splits or cracks or separations or repairs ever... I believe this to be the cleanest best playing vintage 5056's we have ever had in JVG or seen for that matter. This one is a real pleasure to play! HERE IS A LINK TO CUT & PASTE TO SEE MANY MORE PICS OF THIS INSTRUMENT: .
Finally, you’ll want to make sure you have the accessories you need to get up and playing fast. A strap, spare strings (they do break from time to time), and some plectrums are all essentials – and don’t forget an amplifier! You’ll also want a case (preferably hardshell, but soft and padded will do) to store and transport your guitar, and an electric tuner to keep it sounding good. These can all be picked up from your local guitar store, although if you are starting from scratch, you may want to consider a combo kit, which usually offer good value and convenience.
We have arrived at the bottom of this extremely detailed buying guide and recommended guitar reviews. If you have made it here, congrats, you are officially a guitar know-it-all. Of course, the world of electric guitars is huge and there is still a lot to learn if you want to know more. But these are the basics. If you know these, you will be able to confidently pick the best electric guitars for yourself and be proud of it.

Get ready to rock! This kid's electric guitar set has everything little rockstars need to jam out in style and foster a growing passion for music. Whether a child is just learning the basics or has mastered every chord, this guitar is the perfect practice tool to lift them to the next level. Hook it up to the included 5-watt amplifier and let your kid experience music like never before!
A more affordable but still high-quality pair from Audio-Technica would be the M20x, which still shares some features with the premium products offered by this manufacturer. The drivers — in this case at 40 mm in size — feature the same rare earth magnets, and the voice coils are made of copper clad aluminum wire to provide for the clearest possible tones.
After a peak in the 1970s, driven by the use of several high profile players, another lull occurred in the early 1980s. During that time, CBS-Fender cut costs by deleting features from the standard Stratocaster line, despite a blues revival that featured Strat players such as Eric Clapton, Stevie Ray Vaughan, Robert Cray and Buddy Guy in their choice of the Stratocaster as a primary blues-rock guitar.[citation needed] Yngwie Malmsteen is known for playing a Stratocaster in the Neo-Classical genre.
The Neal Schon Signature Les Paul model has a carved mahogany top, mahogany back, multi-ply black/white binding on top, chrome-plated hardware and a Floyd Rose tremolo. The one-piece mahogany neck has a scarfed heel joint a “Schon custom” slim-taper neck profile. The 22-fret ebony fingerboard features pearl split-diamond inlays and single-ply white binding. The pickups are a DiMarzio Fast Track/Fernandes Sustainer in the neck position and a Gibson BurstBucker Pro in the bridge position. In addition to the standard Les Paul electronics (individual pickup volume and tone controls, plus three-way selector switch), the Schon Signature features two mini-toggles – an on/off for the Sustainer and an octave effect – along with a push/pull pot for midrange cut. Only 60 of the guitars were made, and sold it out in days upon release.

Electro String also sold amplifiers to go with their electric guitars. A Los Angeles radio manufacturer named Van Nest designed the first Electro String production-model amplifier. Shortly thereafter, design engineer Ralph Robertson further developed the amplifiers, and by the 1940s at least four different Rickenbacker models were made available. James B. Lansing of the Lansing Manufacturing Company designed the speaker in the Rickenbacker professional model. During the early 1940s, Rickenbacker amps were sometimes repaired by Leo Fender, whose repair shop evolved into the Fender Electric Instrument Manufacturing Company.

This is a great local shop.  I bought a new Floyd Rose bridge for one of my electric guitars and brought it to Franklin Guitar to be installed and set up.  I got the guitar back within 2 days and it plays so well that I brought them my other guitar for a set up the next day.  Again, within 2 days I had it back and it plays exactly like the other one...awesome.  I had both guitars set up for a little more than half of what another shop quoted me just to install and set up the new bridge on the one.  High quality work at a fair price in a reasonable time...I won't go any where else to have my guitars worked on.  They also have a good inventory of guitars and amps for sale to fit any budget.
The best electric guitar isn’t one that just sounds good (however you may define good as) — it’s how it feels in your hands. We remember when we could barely start forming memories, going to our dad’s shows and him using his telecaster on stage. He had been playing since he was 5 years old (which we actually used his opinion for in this guide as well) and continues to play today 50 years later. As we grew up and learned guitar ourselves, it was more about what was comfortable and felt as natural as possible. Paired up with the sound and feel, there are a few more factors to take into consideration when you’re looking for the best electric guitar.
Due to the ever rising popularity of reverb, it didn’t take long for companies to figure out how to recreate the effect in early guitar amps. Have you ever heard of Spring Reverb or Plate Reverb? While to you these are just labels on a knob, back then these were real analog devices built into amplifiers. Needless to say, we have come a long way from using complex mechanical contraptions to create decent reverb.
Before buying any guitar you have to fix a budget range, so that later on you do not end up blowing off more money than you actually wanted to. Yes, it is true that buying a guitar can be expensive, but you do not have to burn a hole in your pocket in order to buy one. Just have a price range fixed and then search for the best ones accordingly. You may not find the good ones right at the beginning, but eventually you will definitely find the perfect one that will even last long.
The EB-18 was not all that popular among bass players, and total production has been estimated at 874. The more expensive follow-up model, the EB-28, was even less popular with a total production of 217 units.[16] See also: E-18 series guitars[17] Martin did not resume building basses until 1989 (during the MTV Unplugged era), in which their approach was more consistent with company history:
The Telecaster has also been a long-time favorite guitar for hot-rod customizing. Several variants of the guitar appeared throughout the years with a wide assortment of pickup configurations, such as a humbucker in the neck position, three single-coil pickups and even dual humbuckers with special wiring schemes. Fender offered hot-rodded Teles with such pickup configurations, the US Fat and Nashville B-Bender Telecasters around 1998. The Deluxe Blackout Tele was also equipped with 3 single-coil pickups, a “Strat-o-Tele” selector switch and a smaller headstock than a standard Telecaster. The most common variants of the standard two-pickup solid body Telecaster are the semi-hollow Thinline, the twin-humbuckerDeluxe—and the Custom, which replaced the neck single coil-pickup with a humbucking pickup. The Custom and Deluxe were introduced during the CBS period and reissues of both designs are currently offered.

The first rule of making repairs to any instrument is to decide if the value of the instrument, financial and otherwise, is worth the price of the desired repairs. If the repair is small enough to be comparable to guitar setup cost (about $50) then it is almost always worth having done. However, for large and expensive jobs like painting and neck replacement, the cost can easily outweigh the need of repair.

While tone and volume should be your foremost considerations, you should also determine what extra features you really need. Built-in effects are great if you want a no-hassle, all-in-one package, but they may not be as flexible as external effects pedals and processors. An effect loop is useful for effects like digital reverb and delay, but it’s not essential if your effects consists of a few stomp boxes. Line outputs with speaker emulation are helpful for home recording, and external speaker outputs are great for expanding your live rig.

Foden: In 1912 to 1917, Martin made guitars for concert guitarist William Foden. These are similar to the standard Martin models, but have simple soundhole rings and a 20 fret fingerboard (instead of 19). Made in sizes 0 and 00, the styles were similar to Martin's Style 18, 21, 28, and a pearl trim model. Only 27 of these guitars have been documented to date.
In addition to the Les Paul, Gibson is a brand well known for pioneering some classic guitar shapes and constantly innovating, introducing concepts such as the humbucker, the digital guitar, and – most recently – the Min-ETune automatic tuning unit. Since the fifties, Gibson electric guitars have been used by everyone from James Hetfield to B.B. King.
Ibanez is a Japanese guitar manufacturing company, which is famous for being the first to mass-produce the seven-string and eight-string variants of guitars. The perfect size, great projection and beautiful tone offered by AEL, PF and EWP series of Acoustic guitars are remarkable. RGX and the GRX series of electric guitars come with the Ibanez brand at an affordable price. The mid-range GRG series include offers greater precision, high performance and playability.
Takamine has been known for their high quality and highly affordable guitars for years. Their GD51CE comes in just under $500, and is a cutaway dreadnought. It is my top pick if you are looking for the best cutaway acoustic guitar under $500. It has a slim neck for great playability, something that beginners and experts both love. It has a spruce top with rosewood back and sides. You will also be able to amplify this guitar, as it is an acoustic electric. It comes in natural or sunburst finishes. Owners describe it’s sound as loud and balanced, which is expected of a dreadnought cutaway. You can’t go wrong either, as it has an onboard tuner. See more pictures and reviews of the guitar here.

THE NECK POCKET The next step is to rout the neck pocket and body cavities. For the neck pocket I like to use a 1/4" bit and leave the scrap wood edge around the body to give the router the extra support it needs when routing the neck area. To find out how deep you will have to rout the pocket measure the total thickness of the heal of the neck. Then measure the hieght of the bridge from the bottom to the top of the groove the string will sit in on the saddle and add about 1/8" to it. That allows for the string clearence over the frets. The subtract that from the overall thickness that you came up with when you measured the heal of the neck. That will give you a pretty accurate depth that you will need to carve the pocket down to. Be very careful when you rout the neck pocket! You don't want to make it too big otherwise you end up with gaps between the neck and the body and you don't want to go too deep because it can be impossible to fix. Rout a little bit at a time, and set the neck in each time to make sure you get the proper fit. It shouldn't fit to tight and the pocket should be slightly lager than the heal of the neck because you will have paint accumulation in it which will shrink it a little.
New from Stewart-MacDonald are guitar wiring kits with the premium brand pots, switches, jacks, capacitors and cloth wiring used in original Gibson Les Paul and SG guitars. The kits make it easy to order top-quality components for wiring or re-wiring a 4-control / 2-pickup guitar with a 3-way switch. The kit components include Switchcraft toggle […]

I'm trying to determine the worth of a korean made fender telecaster. Solid ash,butterscotch blonde,maple neck,abalone inlays,seymour duncan pick-up(the other 1 is silver?)classic bridge.It's probably about 5 or 6 years old,it seems nicer than any mexican I've seen. Serial # 04041144 I paid $500 and I want to sell but don't want to be unfair to self or buyer.Help please-QUICK.
The Firebird did have some other unique features such as its banjo style tuners and mini humbuckers that produced a different sound than the full humbucker pickups Gibson typically offered.  Many notable players preferred the Firebird: Mick Taylor from the Rolling Stones used it on the album Exile on Main St.  Allen Collins would also use this axe on stage with Skynyrd alongside his Explorers.  The great Texan blues guitarist Johnny Winter was known for playing slide on his 1963 Firebird to great effect.  Dave Grohl, of Nirvana and Foo Fighters fame, used his white Firebird to create a modern rock sound.
Bass amplifier equipment manufacturers include a variety of different types of companies, ranging from companies that only make individual components (e.g., Accugroove loudpeakers, a speaker manufacturer) to companies that only make bass amplifiers and loudspeakers (e.g., Gallien-Krueger). At the other end of the spectrum are companies that offer bass amplification equipment as part of a much broader offering of different types of instrument amplifiers and public address systems (e.g., Peavey, Carvin A&I or Yorkville Sound.)
As successor to the Bogner Triple Giant, the Fish is a pre-amp with a legendary status, due to it’s unique character and it’s 4-channel configuration. Originally introduced in 1990, the unit was limited to 250 pieces, and is a rare find now-a-days. But thankfully, Bogner decided to reintroduce the Fish, featuring a “Country”, “Shark”, “Strato”, and “Brown” channel. Just like the original, this amp can take on just about any style you throw at it!
{ "thumbImageID": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-Burst/H64297000004000", "defaultDisplayName": "Rogue Rocketeer RR50 7/8 Scale Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Red Burst", "sku": "sku:site51343059402612", "price": "59.99", "regularPrice": "79.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-Burst-1343059402612.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-Burst/H64297000004000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Burst", "sku": "sku:site51343059402610", "price": "59.99", "regularPrice": "80.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Wine-Burst-1343059402610.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Wine-Burst/H64297000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51281539726430", "price": "59.99", "regularPrice": "79.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Black-1281539726430.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Black/H64297000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red", "sku": "sku:site51281539726431", "price": "59.99", "regularPrice": "79.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-1281539726431.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red/H64297000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Reverb is the persistence of sound in a particular space after the original sound is removed. When sound is produced in a space, a large number of echoes build up and then slowly decay as the sound is absorbed by the walls and air, creating reverberation, or reverb. A plate reverb system uses an electromechanical transducer (actuator), similar to the driver in a loudspeaker, to create vibration in a plate of sheet metal. A pickup captures the vibrations as they bounce across the plate, and the result is output as an audio signal. A spring reverb system uses a transducer at one end of a spring and a pickup at the other, similar to those used in plate reverbs, to create and capture vibrations within a metal spring. Guitar amplifiers frequently incorporate spring reverbs due to their compact construction. Spring reverberators were once widely used in semi-professional recording due to their modest cost and small size. Due to quality problems and improved digital reverb units, spring reverberators are declining rapidly in use. Digital reverb units use various signal processing algorithms in order to create the reverb effect. Since reverberation is essentially caused by a very large number of echoes, simple DSPs use multiple feedback delay circuits to create a large, decaying series of echoes that die out over time.
If there was any doubt left in the late 1950s that the guitar – not the saxophone – was rock & roll's essential lead instrument, Duane Eddy settled the argument: See his 1958 single "Rebel Rouser," curled with country twang and rippling with tremolo. "Chet Atkins used vibrato in a selective way – Duane Eddy used it to thrash the music," says the Kinks' Dave Davies. The impact of Eddy's hits, like "Forty Miles of Bad Road" and "Peter Gunn," would soon be heard in surf music and guitarists such as Jeff Beck and George Harrison.
Large-diaphragm models are popular, with Neumann mics particularly favoured. The famous U87 studio workhorse is probably the most commonly mentioned, but it's by no means the only contender. Eddie Kramer, Steve Albini and John Leckie single out its predecessor, the U67, for example, while both of the earlier U47 models (valve and FET) receive name checks from people such as Steven Street, Glenn Kolotkin, Butch Vig and Bruce Botnick (note that U47s were marketed under both Neumann and Telefunken brand-names, but they're essentially the same mics). Neumann aren't the only game in town, though: AKG's C414B-ULS is probably joint most popular large-diaphragm model alongside the U87.
An octave pedal listens to what note you’re playing and adds the next octave up or down (depending on your settings) making it sound like someone is playing the octave note with you. If you’re familiar with guitar or just learning, you’ll know that an octave is the distance between one musical note and it’s corresponding note at a higher or lower pitch. For example, if you play an open E string and then play the E string on the 12th fret, it will sound the same, just an octave higher.

From the outset, wooden bodies had been sourced from existing guitar manufacturers, particularly the plywood student guitar bodies made by theRegal Musical Instrument Company. Dobro had granted Regal a license to manufacture resonator instruments. By 1937, it was the only manufacturer, and the license was officially made exclusive. Regal continued to manufacture and sell resonator instruments under many names, including Regal, Dobro, Old Kraftsman, and Ward. However, they ceased all resonator guitars production following the U.S. entry into the Second World War in 1941.
When you have signature models for two of the most impressive guitar virtuosos in the world, Steve Vai and Joe Satriani, there’s certainly something you’re doing right. Such is the case with Ibanez. Started as a sub-brand beneath sheet music and music-product distributing company, Hoshino Gakki, Ibanez began in the 1920s, specializing in importing the guitars of respected Spanish builder Salvador Ibáñez. In the 1930s, they adopted the maker’s name as a show of respect. In the 1960s through the 70s, the brand shifted focus to making high-quality knockoffs of Fender and Gibson models, until Gibson’s parent company filed a lawsuit for copyright infringement. After settling out of court in 1978, the brand again began making original models, including signature guitars for the likes of Kiss frontman Paul Stanley (who plays a guitar similar in shape to the Iceman pictured above) and Bob Weir of the Grateful Dead. Now they specialize in precision instruments for musicians who like their music loud, hard, and fast.
For an experienced guitarist, the choice of amplifier is personal and a major part of the guitarist’s sound. But most of our panelists thought that, for a beginner, it’s most important for an amp to offer a variety of good sounds so that they can find what works for them and make adjustments as their style and taste evolve. As Ken Rosser put it, “If a kid’s starting out and they’re really into Pantera, they’ll love an amp that gives them that sound, but next year they might discover Eric Clapton and want a different sound.”
@Dax – Sorry to hear that you are having trouble with the pedals in your setup. If the pedals work on their own in front of the amplifier isolated one at a time, this is likely related to a setting or connection with the pedals. Please shoot us an email to with full details on the amp make and model, the inputs and outputs used on both the amp and each of the pedals, and the setting of the switch on the back of the pedals. Also, include whether this happens on every preset or only certain presets with each pedal.
The 1934-’35 Dobro Hawaiian had the relief sections around a round central bridge/pickup “cover” with a Dobro “lyre” logo between the pickup and the neck. The more-or-less rounded lower bout (cutout at the butt) culminated in two little pointed shoulders, which then tape into the neck, giving it an almost “Spanish” look if you squint and ignore the cast designs. The tapered head had two cutouts in the middle and a triple-stepped top extended on the bass side. The principal difference between this earliest Dobro and the one shown in Gruhn/Carter is the tailpiece, which was a curved, cast-in affair, unlike the rectangular tail on the later version. Also, the side relief panels are painted black, with the whole thing clear-coated to seal it. On this first Dobro electric lap there is no volume control. The jack is on the but, in the bottom cutout, next to the strap button.

For you, the 15W should be fine for a long time to come. It runs about $215.00 retail but I suspect, like me, you can make an offer on one for less than $200. Many dealers put these up on Reverb or Ebay as “open box” or make an offer. Mine was marked open box but was clearly brand new when I got it. I think I paid $189 for my 15W. By far this series was the best value I have ever seen in an amp. I’ve owned several Fender, Vox, Sundown (smaller 5W) and no name amps. This AV series is super nice.
The Little Lady is very similar to the 38C, but on a pearwood comb and with different cover plate art. It is technically a playable harmonica, but it is generally regarded as a knick-knack piece that can be used as personal jewelry. It is also available as a keychain. The Little Lady holds the distinction of being the first musical instrument to be played in outer space.[30][31]
[author image=”” ]Alan Steward is a Producer, Engineer and Musician with over 30 years experience in the music business. He worked with Grammy winning artists from the Temptations to the Baha Men. His music has been used in TV shows and feature films. He is also well-known as a producer of loops for music production and owns a recording studio in Germany.[/author]
If you think not using any pedals makes you more “real” or “natural” of a player, you’ve got to be kidding me. Let’s think about what is physically happening when we play electric guitar. The sound is created when a guitar string is plucked by a pick, likely made from some polymer (oh wait, the “real” guys use their thumb, okay) causing it to vibrate. This vibration also creates a corresponding vibration through a magnetic field above your pickups. The pickup converts this into electric current, which passes through a simple low-pass filter tone circuit and a passive volume attenuator (we presume you’re not using an active pickup, being that you’re keeping it “real”) that does some equalization before it even gets to the cable. The standard cable consists of stranded, >99% oxygen free copper wire usually measuring between 18-24 gauge thickness, creating another filter in conjunction with the guitar circuitry based on cable capacitance.
The Gibson style guitars generally have shorter stubbier necks, with a 233/4 inch scale length, which suits some but not all. The Les Paul, the quintessential model, boasts twin humbucking pick-ups which effectively reduce noise and produce the thick, warm tone associated with Gibsons. It is difficult not to be impressed by the tradition of Les Paul guitars. No-one will ever convince me there is a better looking guitar style. For under $1000 the Epiphone Les Paul Standard will give you a little bit of the legend to take home and for many that's a good enough reason to buy one. Epiphones are cheaper factory made versions of the Gibson USA range. For those who learn on Gibson style guitars the Les Paul is what all guitars are measured against.  more...	

Jimi Hendrix: Right-Handed vintage white body flipped upsidedown for left-handed use with an oval profile maple-cap neck. The controls and electrics are vintage-modern to ensure stability. The guitar is strung upside down with the strap button on the lower horn, the backwards 68 thick black CBS headstock decal is so that—in front of a mirror—the player sees the guitar as it would appear if Jimi Hendrix played it. As well as this upside-down lefty Strat for right-handed players, Fender also made four exact copies of the Vintage white Stratocaster Hendrix used in many performances, the most famous being Woodstock (1969).
Every time I guitar shop I come back to Gibson. Pricey, but the look, feel and tone are to my tastes. A lot of classic songs have been recorded over the years on these guitars. Are they superior to Martins or Taylors? It's a matter of preference. I own a hummingbird custom and the aesthetics, tone and feel are unsurpassed, but it doesn't "cut" like a Martin. For chording though, it's a better balance. I also own a J-45 which is the ultimate acoustic blues guitar.
“A magnet doesn’t have a tone, per se – you can’t put it to your ear and hear anything. It’s really the engine that drives the coils in a pickup. In a humbucker you’ve got a bar magnet located under the coils; if it’s a Stratocaster or a Telecaster you’ve got magnetic rods that are in the centre. But essentially they’re all doing the same thing: throwing up a magnetic field that the guitar strings vibrate in when they’re plucked.
Another tone control we almost all come in contact with is the amplifier tone stack, as sketched out in Figure 3. A sequence of evolution at Fender led up to the 1957 Bassman becoming the prototype for most amplifiers’ Treble/Bass/Mids control knobs. Marshall and Vox used a similar system. The amplifier “tone stack” is just that – a stack of two or three potentiometers which provide treble, bass, and sometimes midrange controls.
Clarence White helped shape two genres: His acoustic flatpicking, first displayed as a teenager when he and his brother formed the Kentucky Colonels band, was key in making the guitar a lead instrument in bluegrass. Later, he set the stage for country rock and transferred that dynamic precision and melodic symmetry to the electric guitar. A top session man in the Sixties, he played on the Byrds' 1968 landmark, Sweetheart of the Rodeo. After he joined the band later that year, White brought a full-bodied rock elation to his California-inflected Nashville chops. "He never played anything that sounded vaguely weak," said the Byrds' leader, Roger McGuinn. "He was always driving… into the music." White had returned to bluegrass with the acclaimed Muleskinner album when he was killed by a drunk driver in 1973. He was 29. "Clarence was immersed in hard country and bluegrass," said Dan Auerbach of the Black Keys. "He incorporated those elements into rock & roll, and it totally blew people's minds."
The Hummingbird Pro's unique look breaks the typical monotonous appearance of conventional acoustics, and it does so without straying too far from the familiar. It is easily identifiable by its uniquely shaped ornate pickguard, which matches the guitar's faded cherry sunburst finish. Whether you are on stage or just jamming with friends, you can be sure that this acoustic will stand out.
Then I remembered Kent Guitars. I thought it would be pretty cool to have a guitar with my last name on it. Although they didn't appear on the U.S. west coast very often, if at all, (I would remember them if they did), It turns out there is a whole crapload of them out there. Information is scattered around the internet in bits and pieces and nobody who was making them at the time is talking about it. So I have started gathering information, limiting myself to the 500,600,700, and 800 series models. The only ones I am interested in owning are the 700 and 800s. I have a 740, an 820, 823, 833, and 834. I may never get the chance to buy another.
All that being said the best guitar is the one that allows you to express yourself to the best of your ability and makes you feel good doing so. If you need a custom shop Les Paul to do it then by all means go for it. If a Godin or Ibanez or Dean or Jackson is the one for you who are we to tell anyone they are wrong. Personally I think the best guitarists on the planet play Telecasters! :-)
Before you start thinking your pickups can kill you, bear in mind this is a very small signal (2 volts) that requires amplification (this is where your aptly named guitar ‘amplifier’ comes into play). To put things in perspective, the little rectangle shaped batteries (D) found in distortion pedals are 9 volts…as mentioned it’s a very small signal.
What people may not know is that they have a very affordable line of entry-level guitars.  This line continues the legacy of craftsmanship and prestige that comes with owning a Taylor. Whether you look into their line of Baby Taylors – 3/4 sized guitars that play better than many full-sized budget guitars, or you look into their entry full-sized acoustics, Taylor will not disappoint you.

Cool! Yes, this idea is definitely stolen from G&L!It would be cool to see a picture or schematic, but it’s probably going to be really close to this, if not identical. Meanwhile: Don’t be scared to open up your guitar — they’re build for it! Just be gentle till you learn what you’re doing. I always stand by the Maker’s Faire credo: If you don’t open it, you don’t own it. 🙂
Since a guitar’s sound is primarily determined by the interaction of the strings vibrating and the magnets in the pickup, you might wonder why wood makes a difference. In fact, the wood has a significant effect on the way a guitar sounds. The resonance from the wood determines how long the strings vibrate and the shape of their motion. Wood also allows the pickup itself to move. This combination makes wood an important factor in the overall tone of the guitar.
Overdrive pedals are intended to mimic the sweet sound of an overdriven tube amp. They are generally more subtle, warmer and a bit richer in sound. Overdrive pedals typically don’t produce the kind of heavy distortion needed in hard rock and heavy metal, but they are fantastic for blues, country, rock and anything else where you need warm, textured distortion. A good example of a quality overdrive pedal is the Ibanez Tube Screamer.
The interface does get the job done well, it’s just that I’ve seen better looking free VSTs. But for me, this is completely fine because while flashy interfaces are nice, problems like software issues and hard to see text occur.  None of that is here, and within a few hours, most users will feel fairly comfortable creating moderately difficult, but realistic sounding guitar parts.

While a noise suppressor/gate is not a modulation effect, it usually works and sounds best when it’s placed either directly after or in front of modulation effects. I prefer the noise suppressor after modulation effects as this placement will mute an unwanted constant “whoosh” that often can be heard when a flanger or phaser shifter is engaged even though the guitar is silent.
Since a guitar’s sound is primarily determined by the interaction of the strings vibrating and the magnets in the pickup, you might wonder why wood makes a difference. In fact, the wood has a significant effect on the way a guitar sounds. The resonance from the wood determines how long the strings vibrate and the shape of their motion. Wood also allows the pickup itself to move. This combination makes wood an important factor in the overall tone of the guitar.

While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:

The ’38 Supro line contained two lap steel models, still made of wood, but substantially different from the model seen in the ’38 Sorkin/’39 Grossman catalogs. The Supro Avalon Hawaiian Guitar had a rectangular body with rounded corners and two concave “cutaway” shoulders. The head had a slight curve to it. The fingerboard was made of polished aluminum, and the guitar was finished in gloss black. An enameled handrest covered the single pickup and strings passed into a slotted rectangular metal tailpiece. On either side of the fingerboard, just above the handrest, were two square plates embossed with the Supro logo and containing one control knob each, for volume and tone. Without case this cost $40. Note that this was the first appearance of tone controls on Supro brand guitars.

I think that there is a lot more that goes into getting a rich sound than just the pickup layout. AYK different pickups also have very different sounds, so if you line up an HH next to an HSH, there are going to be so many different factors that it's impossible to just point to the pickup configuration as the difference, unless they are the same make and model. From my personal experience of wanting a nice HSH many years ago, it's not worthwhile to limit yourself to that configuration because there are so few models. IMHO. Also, I don't think you mention what style of music you play at all. – JFA Jun 25 '14 at 1:59

: Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!

An equalizer adjusts the frequency response in a number of different frequency bands. A graphic equalizer (or "graphic EQ") provides slider controls for a number of frequency region. Each of these bands has a fixed width (Q) and a fixed center-frequency, and as such, the slider changes only the level of the frequency band. The tone controls on guitars, guitar amps, and most pedals are similarly fixed-Q and fixed-frequency, but unlike a graphic EQ, rotary controls are used rather than sliders.
Paul Reed Smith Guitars (better known as PRS) is a Maryland-based manufacturer, and relatively new in the world of guitars – founded in 1980, when they began making a series of hand-built guitars. Today they have a wide range of models, which are built in both Asia and America, as well as a full roster of artists playing their guitars; including Mike Oldfield, Dave Navarro, Carlos Santana, and Mark Tremonti.
With a growing popularity of the Les Paul guitars, hundreds of unendorsed imitations and copycat versions had appeared on the markets. However, due to the lack of U.S. legislation to address patent infringements and restrict the import sales, oversea imitations caused legal and financial problems to the Gibson Guitar Corporation. An also troublesome thing was the existence of high quality imitations of vintage Les Paul (and vintage Stratocaster) produced by oversea manufacturers.
A lot of people will tell you that Jackson is not what they used to be. I’m not really going to try to refute or prove this claim, but their guitars are holding up pretty well at this moment. It’s still a brand you can trust to build you a solid guitar. Case in point that JS32 Dinky. It’s my favorite Jackson even though there are much better models in their current lineup.
Combo guitar amplifier cabinets and guitar speaker cabinets use several different designs, including the "open back" cabinet, the closed back cabinet (a sealed box), and, less commonly, bass reflex designs, which use a closed back with a vent or port cut into the cabinet.[26] With guitar amps, most "open back" amp cabinets are not fully open; part of the back is enclosed with panels. Combo guitar amp cabinets and standalone speaker cabinets are often made of plywood. Some are made of MDF or particle board—especially in low-budget models.[26] Cabinet size and depth, material types, assembly methods, type and thickness of the baffle material (the wood panel that holds the speaker), and the way the baffle attaches to the cabinet all affect tone.[26]

• What they’re made of: Frets are typically made of nickel-silver or nickel-steel alloys, or – less often – brass, copper alloy or stainless steel. The harder and more dense the material, with stainless at the top of the scale and soft nickel at the bottom, the brighter and more cutting the notes played on a guitar should sound. Most manufacturers use nickel alloys because the metal is soft and easy to work with. At this point, most guitarists’ ears have been developed to the sound of nickel as well, and most guitar buyers have a tendency to balk at the unfamiliar when shopping for instruments.
Jim Root: Featuring mahogany body, maple Modern C shaped neck, ebony fretboard in Flat Black finish, maple in Flat White, 22 Jumbo frets, EMG pickups, EMG 81 in bridge position, EMG 60 in neck position, strings-through-body hardtail bridge, locking tuners, 3-way switch, single volume knob and large headstock.[18] Along with his Jim Root Telecaster, it is the only Fender guitar equipped with EMG pickups as standard.
Sometimes a pitch shifter will retain the original signal while adding in the new shifted pitch.  The new shifted note can be set at a given intervallic distance from the original and will automatically harmonize any given series of notes or melody.  In short, it will harmonize the guitar by duplicating the melody at a 3rd, 5th, or whatever interval you define.
In 1980, however, Martin had hired another guitarmaker, one John Marshall. Marshall had studied lutherie with Eric Schulte whose base of operation was in the far western Main Line suburbs of Philadelphia around Frazer, PA. Schulte himself had worked with the legendary Sam Koontz, who was responsible for Harptone and some Standel guitars, as well as his own. After learning the tricks of the trade from Schulte, Marshall became involved in the ill-fated Renaissance guitar company of Malvern, PA, just up the road from Frazer. Renaissance, you’ll recall, made those exotic plexiglass guitars and basses in around 1979 (plus a later series in 1980 designed by John Dragonetti). These were designed by John Marshall. Marshall left Renaissance to join Martin, where he was hired to work on the electric guitars which would become Martin’s 28 Series.
Different people have different opinions on what makes a vintage guitar. For the purposes of this site, a vintage electric guitar or vintage bass is one that was produced in the golden age of rock and roll. From the very early 1950s when Fender first produced the Esquire and Broadcaster, and Gibson the Les Paul; to the early 1980s, when both of these companies sold to their current owners.

Electro-Harmonix’s Memory Man was one of the most popular solid-state delays ever, and even with its meager 5 to 320 milliseconds delay time was little short of revolutionary upon its introduction in 1976. At around $150, it was something of a bargain, too, though not dirt-cheap by any means—considering that at that time you could buy a new Stratocaster for just a little over three times that figure. The Memory Man was launched with Reticon SAD1024 chips, but E-H switched to quieter, better sounding and more adaptable Panasonic MN3005 ICs when these became available, and the latter is the chip found in the better-known Stereo Echo/Chorus and Deluxe models. 

SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions ( Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase

Bell's journey to become a guitar master began with a car running over him as a child. He was an aspiring baseball player just shy of his 13 birthday and left with a fractured skull that ended his future career. So he picked up the guitar and fell in love. He's been building and repairing guitars since 1975. Today, he's running Bell's Custom Guitars on the side and repairing guitars at Murphy's Music in Irving.
The Epiphone brand scores another spot in this list with the Hummingbird Pro, a stylized take on the popular dreadnought shape. This guitar is the affordable version of the original Gibson Hummingbird, as seen in the hands of big name artists like Keith Richards, Noel Gallagher, Sheryl Crow and many more. It is a modern and more cost effective take on the guitar that Keith used on many of The Rolling Stones' popular tracks, including "Play with Fire" and "Satisfaction".
This site is dedicated to all you guitarists out there who ever owned an old Japanese Teisco guitar, especially those of you who started out with one and still have it today. I created this site out of frustration at not being able to identify the model of my first Teisco despite my best online and off-line efforts. I found out (eventually!) that it's an SS-4L made some time in the early/mid 60s.
Why We Liked It - The price on amazon is undoubtedly pretty high, which means that this Gibson is going to be for serious players and professionals only. You'll need to make sure you have gig bags or a guitar case in hand for protection! However, if you’re looking for the absolute best that the electric acoustic market has to offer right now, then there probably aren’t many contenders to the J-200’s crown.

I bought my amp at my local music store. When I walked in, I told the sales person that I got my El Dorado and I wanted to buy an amp. I asked him if he would mind playing my guitar through the amps in my price range. He readily agreed because he is the person who found Big Lou Guitars on the internet after I tried every brand of electric guitar in the store and believed I needed a big nut guitar because my hands needed an action with more space between the frets and strings. He told me to bring it in when I got it because he wanted to try it. He plugged it in and went up, down, and across the fretboard playing riffs and chords. When he finished, he said “great action, I’m surprised – and the price!”
On Martin guitars, this is a really big deal. Martins all seem to have a problem with the "neck set" on many of their guitars before 1970. High string action is the result, making the guitar very difficult to play. This can only be fixed correctly by a "neck set" (removing the neck on the guitar, and refitting the neck at a slightly increased angle, which lowers the string action). If done correctly, this does not affect the value of the guitar (and in fact can make it more valuable, as the guitar is much more playable). Generally speaking, most players would agree if the "string action" is more than 3/16 inch (5 mm) at the 12th fret, the guitar needs a neck set. This measurement is taken from the bottom of the low-E string, to the top of the 12th fret.

There you go! That's the way to go about it. Now keep practicing till you get perfect. I am sure you would get these bass guitar tabs for beginners in few attempts. These were some of the best guitar tabs for beginners. There are some best acoustic guitars for beginners that you can select among the different types of guitars. Buy the best guitar, so that you do not come across any problems later on. You could also purchase some guitar tab software and practice the notations. There are many musical sites that provide you with free guitar tabs and tutorials, that you can refer to. They may also help you get a broader view on how to play guitar tabs. Learning any instrument is fun and helps you overcome fatigue, thus rejuvenating your power and mood. You can definitely trust me on that!
Lyndon Laney established his brand in 1967 in Birmingham (England). In those days, he was also playing in a band with a couple of guys you might've heard of: John Bonham and Robert Plant. You might also know Tony Iommi (Black Sabbath) who happened to be one of his first clients. The LA100BL is a must among heavy-metal guitarists, while the KLIPP aims to be more versatile. The AOR (Advanced Overdrive Response) series provides more gain every time, contributing, in part, to the brand's constantly growing reputation. Among Laney addicts, we could mention Ace Frehley of Kiss and Mark Knopfler of Dire Straits.
A boost pedal is one of the most useful pedals one can have. Simply put, it boosts the signal that goes into it. It can perk up a low output guitar, or bring out more character or a different quality to your amp. This is especially useful for solos where overdrive or distortion would overwhelm the tone you've got. Boost adds more “you” to the sound. Look out for what tone the boost adds, like treble or mids before purchasing. Some boosts claim to be transparent, maintaining the same EQ of your original tone, while others spike a certain part of your EQ intentionally.
It’s curious to note that also tauted in the ’39 Grossman catalog was the National Res-O-Lectric Pick-up Unit, designed to be added to National and Dobro amplifying guitars. This was not sold as an accessory, but had to be factory-installed for $25. On single-cone guitars, the bridge assembly/cover was replaced with the pickup assembly, faced in gloss black Ebonoid. On tricone guitars the pickup would be built in to the silver cover. It’s not clear if these were also mid-’37 developments or if they appeared closer to the ’39 Grossman catalog publication date.
That’s why it’s incredibly important that once you work through your first method book you should start seriously considering finding a teacher to further your education. A teacher can help give you the tools that you’ll need to continually advance on your instrument, which in turn will ensure that it will be a lifelong source of entertainment and enrichment.
The significance of Les Paul’s contributions to his Gibson guitar design remains controversial. The book “50 Years of the Gibson Les Paul” limits Paul’s contributions to two: advice on the trapeze tailpiece, and a preference for color (stating that Paul preferred gold as “it looks expensive”, and a second choice of black because “it makes your fingers appear to move faster on the box”, and “looks classy―like a tuxedo”).[11]

If straightforward lessons aren't what you're looking for, fear not: Rocksmith 2014 tries to refresh your picking skills through games that veer into the ridiculous. I tried out Return to Castle Chordead, which revels in delightfully bad NES-style graphics (the game challenges the player to zap the hungry undead by playing the correct chords). Scales Racer—which, you guessed it, teaches the major and minor scales—puts the player in a car fleeing the police. Pick the right notes and you zip between lanes, eluding the fuzz.
I won't lie, I was VERY skeptical ordering this. But I figured that isfits not great, I could sell it. After getting it, this package is amazing for the money. I am definitely keeping it! I own/have owned $5,000+ models and some $100 "disposable" axes and I was shocked at this beautiful guitar. First off, the flamed top is gorgeous. It doesn't have a cheap look to it. The fret board is so so but you cant expect too much here. The frets don't have sharp edges and nicely done. The sealed tuners are smooth and after a minute of the inital tuning (with the included chromatic tuner), I played it for a few hours and it kept proper tune. The overall tone of the guitar is warm and projects well. I got absolutely no rattle or vibration. Then I plugged into the included amp. I will admit, the amp isn't great but but its a free practice amp. So I plugged into my Peavey and sounds awesome. It also came with a so so gig bag, few picks, a strap, a truss rod key, sorta cheap guitar cord, an extra set of strings, and batteries for both the tuner and for the preamp on the guitar. Speaking of that, its a 3 band EQ with a gain control, volume and a battery checker. I paid $140 for all of this and I will say that this is one of the best deals I have gotten in almost 37 years of me playing. If you want a good practice guitar and can even play a show, don't pass this one up. The guitar alone is worth 3x of what the whole package costed me. I think I'll check out more Glen Burton guitars.

Second, just like removing the pickup selector, you will need to access the back electronics cavity or remove the pickguard. Refer to the pickup selector section for more details. Take note of what wires are soldered to what lugs before you remove the pot. If you are not familiar with electric guitar wiring, I suggest that you draw a picture of the selector and label the soldered wires. Once you know where everything has be wired, you can cut the wires close to the lugs and remove the old pot. Then you can bolt the new pot in place, solder the wires on the lugs, replace the cavity covers or pickguard, and replace the knob. For more information about how to solder wiring, see the soldering page.
The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").
Their innovation continued by developing a bowl shape guitar body - the result, at least to my ears and that of many other guitarists, is that the resulting tone of their acoustic-electric guitars is similar to those using traditional tonewoods in their construction. Unlike more radical brands like RainSong, they still use traditional woods for the tops of their guitars.
I've used 3 effects applications till now: Amplitube podfarm and guitar rig 5. The best software I found so far is guitar rig the sound it gives is amazing it has some pretty good presets and it has an intuitive interface I recommend trying out demos of every software to see which better suits you. I recommend guitar rig. I would suggest using a PC instead of a laptop because they're processor intensive. Anything that's part of the is series is great (i3 i5 i7). Good luck and remember to get asio4all drivers google it and get the newest drivers
Late 1938: Scalloped "X" bracing with "rear shifted bracing", where position of the "X" moved further than one inch from soundhole (exact measurement varies, for example: a 1941 D-18 has 1 7/8" distance). So the X-braces were moved about 7/8" further down. And the tone bars were angled more parallel with the length of the guitar and further apart. These late-1938 to late-1944 guitars had deeper scalloped braces than the 1938 and prior forward or advanced braced guitars. This gives the late 1938 to late 1944 Martin guitars improved bass response (don't let anyone tell you that war-time Martins are not as good as pre-1939 Martins!)

If you’re using temporal effects such as delay and reverb, these generally work best at the end of the chain. Putting a delay at the end allows the effect to give a more natural echo to everything that comes before it; the echo itself will not be altered by other effects. The same applies for reverb. Most guitarists leave reverb as the very last effect, occasionally using the amp’s in-built reverb over a pedal. Amps that have onboard reverb usually use a spring unit which produces a shimmery twang that works well for many types of music. However, if you’re looking for a roomier type of reverb that emulates a giant concert hall, a pedal based reverb is probably what you’re looking for. Either way, putting reverb at the end of the chain provides a spacious, natural tone that simulates a cavernous echo.
Hook isn’t worried the current challenging economic pressures will jeopardize the guitarist’s iconic status. “The guitar hero will never go away,” he said. “People adore this image of the guitarist almost being like a cowboy. You will always see the odd-looking kid walking down the street holding a guitar — there just might not be as many of them.”

Welcome to  This is my personal website for displaying photos of my various Ovation guitars.  I have been a player and collector of these fine instruments for over 30 years.  Although I don't profess to be an expert on all things Ovation, I do have a passion for their artistic and sonic beauty which I hope you will share.  My collection is always evolving, at one point  numbering over 50 guitars.  At one time or another I've been lucky enough to own almost every type of Ovation and Adamas guitar as well as some one-of-a-kind and truly collectable specimens.  All of these guitars are wonderful and it is my pleasure to share them with you on this website.     Dave   

Certain aspects of this thicker sound can only be achieved by using a bigger gauge of string.  Pat Martino, Stevie Ray Vaughan, and other guitar masters are a testament to this philosophy.  A bigger string will offer a bigger sound, if we are willing to make sacrifices in other areas.  Again, these sacrifices may be negligible depending on your genre.
We used to see and hear Al Di Meola performing his big instrumental hit "Mediterranean Sun Dance" either with unforgatable Paco de Lucia or with his band's members. This time he performed it in duet with Antonio Sánchez, young flamenco guitarist born in Madrid, nephew of Paco de Lucia and Ramón de Algeciras and cousin of J.M. Bandera, who spent four years touring the world...
Roland has come a long way from its humble beginnings back in the early '70s as a rhythm machine manufacturer. The company grew to produce various other instruments and amplifiers, and is now one of the biggest music gear manufacturers in the world. With so many guitar brands under their name that could produce amps for them - like Boss and Line 6 - they still take the effort to build their own branded amps, and the success that they are enjoying is proof that they are doing the right thing. Their most popular amp is still the Roland Jazz Chorus, as used by artists like Albert King, Andy Summers, Metallica's James Hetfield and Kirk Hammett, Robert Smith of The Cure, Jeff Buckley and many more. These days they have a variety of amplifiers in the entry to mid-tier market, most of which continue to garner great reviews.
The 6260 will keep the high-gain crowd happy. The V22 will satisfy anyone looking for a tube combo for rock, blues or country music. The 1960 will meet the needs of players looking for a British-type overdrive, and the 333 will nail those scooped out metal tones you might be looking for. Bugera is definitely worth checking out for players on a budget, or guitarists just looking to build their collection of classic sounds.
The Takamine brand helps prevent big brand manufacturers from setting their prices too high - by showing them that great guitars can be produced at reasonable prices. On top of their bang per buck reputation, Takamine is considered as the pioneer of installing built-in pickups into acoustics, something that is now a common configuration offered by majority of guitar builders. The Takamine P3NY showcases how impressive tonewoods and electronics can be implemented without ridiculously jacking up the price.

Buying a new guitar amp is easy. But, as you will have seen, ending up with the right amplifier for you isn’t as straightforward. Amps are not something you buy every day, so take your time, read our guide, use our categories and charts as inspiration, and ultimately you will find something that will suit you and your playing perfectly. Good luck in your hunt for the perfect amp!
There are, by the way, a number of discrepancies between Japanese Teisco and American Teisco Del Rey literature from 1966. Many of the older models continued to be promoted in Japan, but not in the U.S. Virtually all guitars in U.S. literature are also seen in Japanese catalogs. This does not mean that just because W.M.I. did not promote certain models, they were not still available in America. Many may have gone to Sears as Silvertones, and it’s possible that W.M.I. still brought in guitars other than those in its catalog.
Classical guitars by Martin are equal in craftsmenship to their steel string models. But unfortunately, their sound and feel is not what classical players seem to want. Therefore they do not have the collectability of the steel string models. I group Martin classical models to include the "NY" series and gut string models made from the 1930's and later.
Guitar Center Repairs is your go-to spot for expert stringed instrument repairs, upgrades and servicing. Located inside every Guitar Center store, our staff of experienced, certified technicians will keep your guitar or other stringed instrument in peak playing condition and help you get the most out of your investment. We also repair and modify other equipment like effects pedals, amps and more at select locations. Set up an appointment or stop by any Guitar Center today.
Guitar amplifier modeling: Amplifier modeling is a digital effect that replicates the sound of various amplifiers, most often vintage analog "tube" amps and famous brands of speaker cabinets (e.g., the Ampeg SVT 8x10" bass cabinet). Sophisticated modeling effects can simulate different types of speaker cabinets (e.g., the sound of an 8x10" cabinet) and miking techniques. A rotary speaker simulator mimics the doppler and chorus effect sound of a vintage Leslie speaker system by replicating its volume and pitch modulations, overdrive capacity and phase shifts.[95]

Many players today have more than one overdrive/distortion stomp box on their pedal boards and sometimes use both at once. My personal preference is to place the lower gain pedals in front of the higher gain ones, but the opposite is absolutely fine if you prefer the sound of that configuration. Placing overdrive/distortion pedals later in the signal chain can increase noise as the noise of several effects chained together can add up, and any noise produced by other effects going into an overdrive/distortion effect will be boosted along with the guitar signal.
I recall reading about one on a thread Gary was a part of. Much ribbing going on. Consensus was that it was pretty much a junker. Now, if you can get it to play and intonate well, I'm a big fan of junkers. I'm intrigued by the ladder bracing too. Very unique sound to that. In/re the bridge, I have an old Carlos that I've been considering doing that to. It's not worth a real neck reset, and the bridge is really high. Not the saddle. The bridge is fat and quite substantial. I could take it down by at least 1mm without it being as thin as a standard Martin bridge.

I’ve been keeping track of completed Ebay sales since I started looking at Kents, and have come up with a few average sale prices. The way I figure an average is by first tossing out the highest and lowest sales. If I am left with fewer than three sales I don’t bother. That’s too small a sampling to be worthwhile, otherwise I take the average of the rest. The table below will only be updated when there is a sale that results in a change, so if the table looks like it might be dated, it’s probably because there haven’t been any sales that affected the numbers. Availability of Kent guitars on Ebay seems to ebb and flow.
These two components work in tandem to influence tone and playability. The bridge is mounted to the lower portion of the guitar body. The strings are routed over it before terminating on the body or on a tailpiece. Bridges are designed to compensate for varying string lengths, gauges, and metals, ensuring that the strings remain in tune with each other. Bridges usually allow adjustment of the string's length to bring each string into tune along the entire length of the fretboard. This process is called intonation, and is an important part of setting up a guitar for optimal performance. Some bridges permit string height adjustments that affect the the ease with which the strings can be fretted, and is often referred to as the guitar's "action."
{ "thumbImageID": "Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Satin-Gold-Vintage-White-Pearl-Pickguard/K35721000002001", "defaultDisplayName": "Gibson Les Paul Tribute 2018 - Solid Body Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Gold Vintage White Pearl Pickguard", "sku": "sku:site51500000137390", "price": "1,149.00", "regularPrice": "1,149.00", "msrpPrice": "1,919.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Tribute-2018-Solid-Body-Electric-Guitar-Satin-Gold-Vintage-White-Pearl-Pickguard-1500000137390.gc", "skuImageId": "Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Satin-Gold-Vintage-White-Pearl-Pickguard/K35721000002001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Faded Honey Burst Vintage White Pearl Pickguard", "sku": "sku:site51500000137389", "price": "1,149.00", "regularPrice": "1,149.00", "msrpPrice": "1,919.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Tribute-2018-Solid-Body-Electric-Guitar-Faded-Honey-Burst-Vintage-White-Pearl-Pickguard-1500000137389.gc", "skuImageId": "Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Faded-Honey-Burst-Vintage-White-Pearl-Pickguard/K35721000001001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }