▽ Your account minimum payment amount is determined by the purchases and balances on your WebBank/Gettington Credit Account. The change in minimum payment amount is based on your minimum payment due on your last statement, and includes an assumption of interest charges and SafeLine fees, as applicable. The change in minimum payment amount does not include some subsequent activity on your account as of your last statement, such as backordered, unshipped, returned or other pending purchases or exchanges; any payments, including partial, missed or returned payments; any fees, including recurring partner program charges, subsequent interest charges, late fees or returned payment fees. It is also subject to change based on shipping address, shipping method, partial shipments and taxes. Your minimum payment amount will not change and the purchase will not reflect on your statement until the order ships. If you have a balance or are making a multiple item purchase, see the Existing Balance Payment Chart.


Analyzing the notes you are playing plays an important role while you are performing. The built-in chromatic tuner in these pedals shows you the live feed of your notes whether they are sharp, flat or dead. Similarly, one can bypass the currently selected sound fx for maintaining a pure sound when tuning or completely mute the signal for a uniform silence.
With a history dating back to 1833, Martin acoustics rank as the most historic and iconic guitars ever made. From the small-bodied parlor guitars of the 19th-century to the landmark dreadnoughts of the 1930s and beyond, Martins have and continue to define the form and sound of the instrument. Take a look here for examples every type of vintage Martin acoustic including icons like the D-28, D-35, 000-18 and many more.
A range of other effects are used in various genres. "Wah-wah" and "synth" bass effects are associated with funk music. As well, since the 1960s and 1970s, bands have experimented with "fuzz bass" where the bass is distorted either by overdriving the amp or by using a distortion unit. Fuzz bass was used by psychedelic rock bands in the 1960s and early 1970s and in traditional heavy metal bands (Led Zeppelin) during the same era. Octave-generating effects, which generate an octave below the pitch being played are also used by bass players. Many bassists in modern-day hard rock and heavy metal bands use overdrive pedals specifically made for bass guitar. Since the late 1980s, bass-specific overdrive pedals have been available; these pedals maintain the low fundamental pitch. Using a regular guitar distortion pedal for bass would result in the lower frequencies being greatly lessened. Well-known overdrive effects for bass include the BOSS ODB-3 Bass Overdrive[1], Electro-Harmonix Bass Blogger[2], Tech21 Sansamp Bass Driver[3][4], the DigiTech|DigiTech XBD Bass Driver [5], and the Electro-Harmonix Big Muff.
Dick Dale: Nicknamed “The Beast” by Dale himself, the guitar comes in “chartreuse sparkle” (a greenish-gold color) with a white pickguard and rosewood fretboard, with vintage 50s features and a number of custom modifications. Notably, the guitar comes with a reverse headstock and a reverse angled bridge pickup to achieve the sound of playing a Stratocaster upside-down, which was how Dale learned to play.

Ibanez LGB30 George Benson Electric Guitar   New from$1,099.99Only 2 Left!or 12 payments of $91.67 Free Ground Shipping Gibson 2017 Les Paul Studio Worn T Electric Guitar (with Gig Bag)   New from$799.00In Stockor 12 payments of $66.59 Free Ground Shipping Epiphone Les Paul Standard Plustop PRO Electric Guitar   New from$599.00In Stockor 12 payments of $49.92 FREE 2-DAY SHIPPING Gibson 2018 Les Paul Tribute Electric Guitar (with Gig Bag)   New from$1,149.00In Stockor 12 payments of $95.75 FREE 2-DAY SHIPPING See All Electric Guitars: 6-String
Yeah. He may have to sit down when he plays, but he’ll have you on your feet when he does. BB’s creamy yet piercing tone, his unique vibrato and his absolute flawless ability to express his emotions through the guitar earn him a spot in the top ten. King’s years of fame haven’t gone to his head. He is still as humble as ever giving front row seat tickets to fans waiting in a cold parking lot just to have a glimpse of him. BB King can’t play chords. Nor does he sing and play at the same time. But he has worldwide recognition of his accomplishments as an artist. That’s a mark of a truly great guitarist.
I bought mine used in 1989 in a mom and pop music store in the North GA mountains in Cumming GA and have loved it everysence I Know very little about it except that I would not trade it for a new one. The sustain in the body of the overtone note is fantastic and rare to find.I use d'Addario phosphorus bronze strings 11 - 52 and would not change anything about this guitar,fantastic!!! Thanks Victor
 You will not grow here or learn anything that will be useful in any other company unless they employ 1950's management techniques. Maybe a screenwriter for "Madmen" would find some material here but as someone trying to grow their career you won't learn anything useful. The pay will be no better than your last job minus your previous bonus and 401k match which to my knowledge they do not contribute. So next question, your not making any more money and probably less, not learning anything useful and will need to explain why you left after 6 months, how are you going to position this to beat the competition going after your next job?

Description: Body: Honduras Mahogany - Body Construction: Solid - Top Wood: Maple - Neck Attachment: Set - Neck Wood: Honduras Mahogany (Bigleaf Mahogany, Brazilian Mahogany, Tropical American Mahogany) - Fingerboard: Ebony - Frets: 22, Jumbo, Medium - Inlay: Abalone Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Floyd Rose Style Locking Tremolo - Bridge Construction: Ebony - Cutaway: Single - Hardware: 1x Volume Control, 1x Tone Control, 3-Way Switch, Sperzel Tuners - Pickups: Humbucker - Pickup Configuration: H-H
Sometimes a guitar cab gets mic'd up differently night to night, plus every voice is unique, and every snare drum "speaks" differently (just ask a drummer). All of these minute changes and differences can and will affect the EQ decisions you'll have to make. This is why I'm such a strong believer in ear training and learning how certain parts of the frequency spectrum present themselves outside of their source-specific applications. That being said, these tips can be helpful as a place to start your search, but are not gospel by any means. So without further adieu, let's begin.
If you have an envelope follower, envelope filter, auto-wah or other dynamic touch-sensitive effect, this should go at the very front in most cases, as these effects are almost exclusively dependent upon the dynamics of your playing. Placing most other types of effects in front of them will compress the signal, thereby reducing dynamics and minimizing their performance.
Since you're a beginner, lighter strings are probably going to be easier for you to play until you get your fretting hand built up with permanent callouses and finger strength. I would advise buying 9-42 gauge strings even if that's not what your guitar came with originally - if it had 10's on it from the factory, the 9's will feel slinkier and more forgiving on your hands.

In a way, guitars are a lot like cars — spending more money can get you more performance through different specs and trims. The extra money usually goes into paying for better parts rather than more options; there aren’t a whole lot of places to add to a guitar (unless you want the ZZ Top spinner installed). Big bucks can get you better quality wood, a nicer finish, higher-end hardware, and fancier inlays. Some of these upgrades can alter the sound or simply make help playability. For example, the same guitar cut from poplar won’t sound as good as one cut from alder wood. Better tuners mean your axe will go out of tune less often. That said, some guitars will offer features that others don’t, such as tremolos and automatic tuning. Do your research and, as always, know what you need versus what you simply want.


This guitar comes with an undersaddle piezo pickup system and a ¼-inch output. You also get a detachable lap rest so you can comfortably play this miniature guitar. The rosewood fingerboard has 22 medium frets, while the D’Addario EJ15 steel strings ensure superior playability. This compact guitar is small enough to fit even in airline overhead compartments.
If you have ever played or listened to metal, you probably know about Ibanez. This brand has been around for a while and has become a patron saint of those who like harder sounding music. Built for speed, Ibanez guitars bring are finely tuned instruments which enable the player to explore the limits of their skill. On top of that, any Ibanez guitar is going to be great value for the money.
Matthias Karl Hohner, son of Dipl.-Ing. Matthias Hohner and a direct descendant in fourth generation and name bearer of the founder Matthias Hohner, was one of the last members of the Hohner dynasty involved in managing the family business, between 1968 and 1986. His son Matthias Francisco Hohner belonged to the first generation of direct descendants who did not enter into the family business. Many direct descendants of the founder are still active as members of the "Deutsches Harmonika Museum" and the "Hohner'sche Familienverein".

Entitled Fine Electric Instruments, the 1964 1965 Fender catalogue was circulated from mid 1964, and despite being just eight pages long, contained a large number of guitars, amplifiers and other instruments. This was the first catalogue to show the new Fender Mustang guitar, which was available in normal or 3/4 scale at that time. This catalogue was included in the 1964 annual guitar issue of Down Beat magazine (July), massively increasing the potential readership, both in America and worldwide.
With this bundle, you get a hardshell case to securely transport your music instrument, an extra set of strings, and a digital clip-on chromatic tuner to maintain your guitar in tune at all times. Also included are some extra guitar picks, a polishing cloth, and an Austin Bazaar instructional DVD that can teach you all the essential techniques you need.
By far the best bang for the buck. These guitars are beautifully made with good attention to details such as fret ends, bridge fit and neck joints. They also have wonderful finishing and are made from quality materials. The 'snob' factor is the only thing against them, they are not Gibsons. Martin's or Fender's, BUT they do play just as well and quite frankly, only those with a good ear and perfect pitch could tell the difference in a rock environment. I have Fender, Gibson, Taylor, Columbus, Washburn, Squire and Maccaferri Guitars, as well as Richwood. Sadly like the great majority of guitarists, the guitars themselves are more capable than I am, and I am happy to admit it. Having an exceptional guitar will not make you an exceptional guitarist, just as a more professional camera won't make you a professional photographer. The Richwood Artist / Master series of guitars are good, believe me! For the average guitarist, pro or am, you can buy more expensise guitars but not better as far ...more
A marvelous acoustic guitar with 6 strings and natural color. it has its body made from mahogany and a spruce top. The fret board is also made from mahogany. It one of the most beautiful guitar producing incredible sound. It is designed to suit the needs of the beginner in guitar playing. The price ranges from around INR 14,760 depending on available offers. To find more product information relating to Epiphone DR-212, click on the link below:

1959 is widely considered to be the pinnacle year for Gibson’s mid-century solid body electric guitars, and no 1959 Gibson model is more famous than the sunburst Les Paul Standard. At first a commercial failure, the model was eventually adopted by some the world’s greatest guitarists – Jimmy Page, Duane Allman, Mike Bloomfield, Keith Richards, Eric Clapton, and Billy Gibbons, to name a few. The rarity and celebrity association of the model has pushed the values of original examples into the stratosphere. Gibson Custom’s 1959 Les Paul Standard is a painstakingly-accurate replica of these highly-valuable guitars rendered in detail so intricate that even the chemical composition of the parts has been scientifically examined and re-engineered – and that’s just one small example. Sonically, visually, and tactilely, owning a 2018 Gibson Custom Historic ’59 Les Paul Standard is as close as one can get to owning a priceless original!
While it’s not the most refined thing out there, Jackson Pro Series SL2 is definitely a force to be reckoned with. Minimalist design combined with bulletproof components is the type of recipe you want if you’re looking for a solid guitar. Playable, with great tone, this Jackson definitely spiked my interest in the brand again. Best of all, it’s reasonably priced considering what it offers.
Whether he was playing as a Muscle Shoals studio musician or as one of the lead guitarists in The Allman Brothers Band, Duane Allman was brilliant. Both his standard playing and slide playing were some of the smoothest and most adventurous the world has ever seen. To hear Allman at the height of his guitar playing prowess, give a listen to “The Allman Brothers Live at The Fillmore East.”
Unless you get the guitar that is great for all types of venue, knowing your venue is highly recommended as you might be buying a guitar that has features not suitable or useless to your venue, not only will you be wasting great features for not using it, but you will also be paying for the said features which you will not be using anyway—not practical at all.
A few guitars feature stereo output, such as Rickenbacker guitars equipped with Rick-O-Sound. There are a variety of ways the "stereo" effect may be implemented. Commonly, but not exclusively, stereo guitars route the neck and bridge pickups to separate output buses on the guitar. A stereo cable then routes each pickup to its own signal chain or amplifier. For these applications, the most popular connector is a high-impedance 1⁄4 inch (6.35 mm) plug with a tip, ring and sleeve configuration, also known as a TRS phone connector. Some studio instruments, notably certain Gibson Les Paul models, incorporate a low-impedance three-pin XLR connector for balanced audio. Many exotic arrangements and connectors exist that support features such as midi and hexaphonic pickups.
Guitar Center added a replica of the “Black Beauty” Les Paul Custom, with three pickups, that Peter Frampton used as his main guitar from his days in Humble Pie through his early solo career, photographed playing the instrument on the front jackets of his albums Frampton and Frampton Comes Alive. It has all the same qualities such as the three uncovered humbucking pickups and missing pickguard. The Black Beauty was not issued until 1957; however, the one given to Frampton by a fan named Mark Mariana was a 1954 model that had been routed out for a middle pickup.
Congratulations on buying yourself a top-notch axe — but you’re not ready to shred just yet. A good guitar also requires the right amp to achieve the right sound. Amps can be a daunting purchase (you certainly won’t be starved for choices on the beginner and enthusiast side of the price spectrum) and there are a lot of qualities that need to be taken into account. Want a low-cost amp that’s durable? Shoot for a solid-state amp. Want better sound? We suggest an all-tube amp instead. Want the most tonal variety on a budget? A modeling amp will get you all kinds of sounds without requiring a fleshed-out pedal board. But at any rate, no matter what you’re looking for in an amplifier, these 10 picks cover all the fundamental bases. So purchase, plug in and let’s rip.
The guitar's contribution to the sound comes from its mechanical construction, including the type of wood used, and the pickup system fitted. The hugely popular Fender Stratocaster uses simple single-coil pickups, which tend to give it a bright, articulate sound that doesn't take up too much room in a mix. Guitars with humbucking pickups, on the other hand, tend to have a thicker, more solid sound that can overpower other guitar parts or other mid-range instrument sounds. Tonal qualities aside, humbuckers by their very nature are designed to reject electromagnetic interference, while single-coil pickups are very susceptible to it. Specialist stacked humbuckers, such as those made by Kinman, Dimarzio, Fender and others, are available for use where something close to the original tonality is desired but without the noise problems, and for serious studio work these are a good option. Note that CRT computer monitors emit a lot of electromagnetic radiation from their scan coils, so a flat-screen LCD display is always an advantage if you need to record guitar into a computer system.
When you shop the huge selection of combo guitar amps at Musician’s Friend we make it easy to hone in on what you’re looking for. Just select the type ( tube, solid state, or hybrid), brand(s), and price range, and voila—up pops a selection fine tuned to your specs. To really fine-tune the process you can also dial in the wattage, type (combo or stack), and speaker size/configuration.
The EB-18 was not all that popular among bass players, and total production has been estimated at 874. The more expensive follow-up model, the EB-28, was even less popular with a total production of 217 units.[16] See also: E-18 series guitars[17] Martin did not resume building basses until 1989 (during the MTV Unplugged era), in which their approach was more consistent with company history:
There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.
There are tons of different online retailers and ebay stores that you can find a great deal on parts and supplies, but those were just some of the ones that I have purchased on and been satisfied with their service and parts. NOTE: Do your research when it comes to parts and the quality of the parts you buy. I like to get feedback and reviews from Harmony-Central. You might not be able to get reviews on everything, but it helps you out allot.
Want to write blazing leads and screaming solos? Crank the pitch bend up, use one of four vibrato modes, and shred to your heart's content. Need some ultra-chunky rhythm chugs? S2 features both single-note and powerchord palm mutes with up to 5 layers and 8 variations each, offering superior realism and maximum options. While it excels at rock & metal playing (both lead and rhythm alike), it is also well-suited for many other genres thanks to its clean tone and huge range.
Audiffex Guitar Pedals was one of the first professional guitar software packages, with its original version released more than a decade ago. It has since been upgraded but continues its legacy of providing stompbox effects in software form. The latest version is an all in one guitar effects software package - which includes 36 plug-ins that also works for bass, vocals and other instruments. Features include consistent interface with all effects having similar controls, modular plug-in configuration for easier and flexible routing and intuitive preset management. Current retail price: $49
You are right, we will have the whole guitar amplifiers section of out website completely revamped in the next few weeks! We made vast content improvements on all other sections of GuitarFella and now it is time to work on the amps. Thanks a lot for the remark and make sure you check us out in 2-3 weeks, I guarantee you that you will like the results!
A combo amplifier is a unit in which both the amp and speaker is integrated. You plug a guitar into one of these, turn it on and you are ready to play. The obvious benefit of a combo is that you have everything you need in one standalone unit, while the sound tends to be optimized by the manufacturer to be the best it can be – there’s no worrying about matching it with a good speaker. Combo amps also tend to be cheaper than heads and, as such, are excellent for beginners. While some are very capable of small to medium-sized performance, the drawback is that combos are limited in power compared to a head. They also tend to be much heavier, which can be a pain when regularly transporting it.
’71 blue vinyl combo guitar amps included the Univox 1040 and 1240. The 1040 Guitar Amplifier ($480) was a combo sporting 10 tubes, 105 watts RMS, two channels, four inputs, volume, bass, middle, treble controls for each channel, presence, reverb, tremolo, footswitch, and two 12″ Univox Heavy Duty speakers with 20-ounce Alnico magnets (possibly Jensens). The illustration shows a grille with two small circles on top and two large circles for the speakers. It’s possible this had a pair of tweeters in the small holes, but the description doesn’t say. The 1240 Guitar Amplifier ($399.50) featured eight tubes, 60 watts, two channels with the same controls as the 1040, and four 10″ Univox Special Design speakers with 10-ounce ceramic magnets (again, sound like Jensens). The grille had four round cutouts.
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Shape Shifter - String Instrument Finish: High Gloss Natural
Electronics, guitars and otherwise are as standardized as this book would have you believe. My problem was the 5-position switch. The one I took off the guitar was not the same as the replacement and the descriptions in the book were not sufficient to help me understand how to hook up the different switch. Fortunately, the rest of the circuit descriptions were right on and I got the guitar running (I had to use the old switch). If they author had described the signal flow through the switch I might have been able to figure it out. But the book is an invaluable resource for the DIY'er. I'm sure I'll be using it a lot more.
Upon starting the game and creating a new profile, Rocksmith 2014 asks you to assess your basic skill level so that it can tailor games and lessons to your specific ability. But it can also adapt on the fly based upon how well (or poorly) you handle a particular song, riff, or skill. That's key to Rocksmith's teaching prowess. And the feature immediately becomes clear when you select the Learn a Song mode, which allows the user to play through any one of the dozens of real licensed rocks songs included in the game.

SPEAKER-LANEY-LA30Stock Code: 558568Guitar Amp Items Available: 1Stock ID: 558568Available at Cash Converters Pinetown only. Subject to availability.Please visit the store to view and purchase the product.Cellphone number 083 459 1248 (Whatsapp) Telephone number 031 701 9017 - speak to JennyBuy with confidence -This product is covered by the Cash Converters guarantee.Faulty goods returned within 6 ...

A noise gate is a very handy device that gets rid of hums and hisses that may become apparent when you're plugged in but not playing your instrument. Basically a limiter in reverse, the noise gate simply cuts out sounds below a preset level. As long as you're making music your sound is full on; but as soon as you stop playing, all the noise generated by your effects chain, vintage amp, and/or house wiring is silenced.
DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.
There is no real rule on what fretsize is best – it is purely personal preference.  To find out what size is right for you or for a specific guitar and application, you may have to try similar guitars with different fretsizes.  I have heard many differing opinions on fretsize over the years; some say tall wire is too bumpy for sliding into position or that tall wire causes them to play sharp (from overly pressing down the strings, these players are used to feeling fingerboard surface under their finger tips).  Some say that fretwire below a certain height is difficult to bend on.  Bending and fretting hand slurring techniques are easier when the string can be addressed towards the middle of the ball end of the fingertip so that it may be pushed and pulled from the side rather than fretted from directly on top by the lower part of the fingertip. Some folks like a low fretwire as it feels very smooth to them and they don’t do a lot of slurring techniques.
A guitar recital may include a variety of works, e.g. works written originally for the lute or vihuela by composers such as John Dowland (b. England 1563) and Luis de Narváez (b. Spain c. 1500), and also music written for the harpsichord by Domenico Scarlatti (b. Italy 1685), for the baroque lute by Sylvius Leopold Weiss (b. Germany 1687), for the baroque guitar by Robert de Visée (b. France c. 1650) or even Spanish-flavored music written for the piano by Isaac Albéniz (b. Spain 1860) and Enrique Granados (b. Spain 1867). The most important composer who did not write for the guitar but whose music is often played on it is Johann Sebastian Bach (b. Germany 1685), whose baroque lute works have proved highly adaptable to the instrument.
Many modern processors have such great presets you'll never need to get delve any further to create your own. However, almost all units with presets allow you to easily create your own favorite presets. You can start with a factory preset, tweak the sounds to your taste, then save it in your own location to be recalled at the touch of a button while you're playing.
ESP Guitars makes seven types, the Eclipse series, James Hetfield Truckster, and Kirk Hammett KH-3 from ESP, the LTD EC series and Truckster, the Edwards E-LP series, and the Navigator N-LP series, which are based on the Les Paul design. Certain EC models have 24-fret necks and active electronics using EMG pickups instead of the standard passive pickups and 22 frets found in the traditional Les Paul. The Edwards and Navigator lines are made in Japan, and available only on the Japanese market; they come standard with Gotoh hardware and Seymour Duncan pickups (EMG pickups in a few models), and unlike the EC and Eclipse series guitars, which are updated variants on the Les Paul, these are made to be as close to the Gibson 1959 Les Paul design as possible, in the vein of the late 1970s and 1980s “lawsuit” model guitars from Tokai, Burny, and Greco, complete with Gibson style headstocks.
This is not a complete list of former or current American guitar companies. Among the omissions are Steinberger electric guitars and basses, now part of Gibson and Carvin, who is still independently owned and sells only direct, not through distributors or stores. I have not included the past great archtop luthiers such as D’Angelico, D’Aquisto or current archtop makers such as Bennedetto. Nor have I included the many smaller USA luthiers who are currently building excellent guitars such as Huss & Dalton, Foggy Bottom or Collings.
With the Seagull S6 Classic, you get an acoustic-electric guitar that comes with a solid design and an impressive sound that will delight, regardless if you’re playing it unplugged or through an amplifier or PA. This model features a cedar top that has been tested for pressure resistance, so you know you have a tough guitar on your hands to use for many years.
When Electric Guitars first hit the music market way back in the early fifties, they weren’t easily accepted by the people. However, later electric guitars became an integral part of the music industry throughout the world. The following article describes this amazing music instrument, which unlike its conventional counter-part, works on the laws of electromagnetism.
Unfortunately there are a few who are not too happy with with some of the default patches, they caution that the PODHD500X is not a plug-and-play unit. While you can get good tones with a bit of tweaking, you can get even better tones with more experience, so the learning curve can be a bit steep for some. For best results, you ought to research the actual gear that your favorite musicians use, along with their settings and use them as your starting points to creating your own tones. Thankfully, there are user made presets that you can also use as base for your own virtual signal chain.
Replace or upgrade your guitars pickup selector and other switches with the highest quality switches available from Switchcraft, CRL, Fender, Oak Grigsby Gotoh, Philmore and other top brands. Lever/blade style switches, toggle switches, mini switches, rotary switches, slide switches and other styles. For pickup selector and mini switch technical data, visit our Pickup Selector & Mini Switch Connections page to view drawings with the internal switch connections of each switch position. And if you are upgrading or replacing your pickup selector switch with a different type or style, check out the Pickup Switch Terminal Cross Reference page to view the corresponding terminals of the most common pickup selectors and switches.
Once you have a board design complete, you can send it out for manufacture. Years ago this used to be the major challenge for the home or small builder, but these days a large number of board manufacturers have a web presence and will quickly fabricate single, or low volume boards for fairly modest cost. Eagle (or whichever CAD software you are using) outputs a set of files called gerber files. These files can be emailed or uploaded over the web to the board manufacturer who will plug these into their manufacturing tools and then send the finished boards to you in the mail.
More recently, many boutique pedal manufacturers, such as the Z.Vex and Death by Audio series, have attempted to revive the analog strangeness of germanium transistors and diodes. Not bound by imitation, they continue to innovate with analog materials as if the technical innovations of the 70s and 80s had never happened. The mid-90s Z.Vex Fuzz Factory is notable for establishing internal feedback loops that are inadvertently tied to the logic of circuit bending. This means that the pedal self-oscillates, producing an absurd yet controllable noise, akin to an air-raid siren.

The Effie was also joined by the Coily U1825 guitar and U1835 bass. These were essentially the same except the Coily guitar had a Bigsby-style vibrato, roller bridge with flip-up mute, and a pair of chrome-covered screw-and-staple humbuckers, typical of early-’70s Arias. The Coily bass had similar four-pole screw-and-staple pickups and a fancy trapeze tail with a diamond design on it. These were available in orange sunburst, red and jade green. The guitar cost $122.50, the bass $135.

This electric guitar style has experienced surges and lulls in its popularity, but has never fallen off the scene, due to the number of great players who have chosen to use the Flying V, such as Jimi Hendrix, Dave Mustaine, Kirk Hammett and Michael Schenker.  The Flying V offered many of the same benefits as the SG with a much more distinctive body shape.  It is now a very common guitar among heavy rock and metal guitarists and will achieve its destiny of being a guitar of the future!

Because driving the power valves this hard also means maximum volume, which can be difficult to manage in a small recording or rehearsal space, many solutions have emerged that in some way divert some of this power valve output from the speakers, and allow the player to generate power valve distortion without excessive volume. These include built-in or separate power attenuators and power-supply-based power attenuation, such as a VVR, or Variable Voltage Regulator to drop the voltage on the valves' plates, to increase distortion whilst lowering volume. Guitarists such as Eddie Van Halen have been known to use variacs before VVR technology was invented.[specify] Lower-power valve amps (such as a quarter-watt or less)[citation needed], speaker isolation cabinets, and low-efficiency guitar speakers are also used to tame the volume.
Sensitivity: Valve amplifiers (current drive) are sensitive to crossover resonances and speaker impedance variations. Quality speaker systems often used passive crossovers that were second-order, constant impedance, and critically aligned to avoid resonant effects. Some quality speakers had copper caped pole pieces, which helped damp impedance variations. Note:- With solid-state amps in voltage drive, power decreases as the speaker impedance rises. With valve amps in current drive, power increases as the speaker impedance rises. Therefore a flat speaker impedance is synonymous with a flat frequency response.
{ "thumbImageID": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000", "defaultDisplayName": "Fender American Professional Precision Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030634", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-V-Maple-Fingerboard-Black-1500000030634.gc", "skuImageId": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Black/J46466000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Precision-Bass-V-Maple-Fingerboard-Black/J46466000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030635", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive-1500000030635.gc", "skuImageId": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000-00-60x60.jpg", "imgAlt": "" } ] }

The Chord Harmonica consists of two harmonicas hinged together. Together, they are capable of playing 48 chords. They are 23 inches long, and each chord takes up 4 holes. The chord harmonica is used to provide chordal and rhythmic backing in an ensemble, much as rhythm guitar might do. Jerry Murad's Harmonicat's 1947 "Peg O' My Heart" was played on a Chord, with a cleverly arranged sequence of chords that produced the impression of a melody. Hohner's main Chord is known as the Hohner 48, because it plays 48 chords. Hohner from the 1930s to the late 1960s also produced the Polyphonia No. 8, which played 36 blow-only chords, in three rows. The concept failed and is often frowned upon by professional 48 chord players.


Jazz guitarist Les Paul spent years tinkering with his own electric guitar designs, but his first creations were initially rejected by Gibson’s parent company in 1946. But just a few short years later, on the heels of Fender’s success with the Telecaster and Paul’s growing popularity as an artist, Gibson struck a deal with Paul to play and endorse their new design for a solid-body electric. Gibson released the guitar as the Les Paul signature model in 1952, and since its release, it has become one of the world’s most imitated and sought-after guitars, with late ’50s vintage models being among the most prized instruments in the world.

{"id": "L21430", "skuOrProductId": "L21430", "categoryId":"site1AAG", "name":"Fullerton Standard Legacy Electric Guitar", "pageUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Fullerton-Standard-Legacy-Electric-Guitar-Graphite/L21430000001000-00-120x120.jpg", "addToCartUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"30", "inventory":"0", "brand":"G&L", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"1", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "12% in Rewards", "checksum":"581797334923", "priceVisibility": "1"}
Finally, their taper. Taper refers to the gradual increase or decrease of the pots ohm as you adjust it. There are two types of pot taper, Logarithmic (Audio) and Linear (Lin). The human ear hears in a logarithmic manner, so in a gradual increase or decrease, whereas linear, to our ear sounds almost more like an on/off. Which you use is completely up to you, many players prefer a linear volume pot for example, but I find that a quality logarithmic pot in both volume and tone positions offers more scope for adjustment, if using a quality pot that is! Low quality audio taper pots, in my experience, offer unreliable tapers, often not providing a even, gradual adjustment as you roll off or on. A guitar's volume and tone pot can bring out so many great sounds from your rig, it offers versatility to your sound, and I love pushing an amp hard and finding those sweet spots on the guitar's controls to really capture a great tone. So I feel that's why a quality logarithmic pot with a perfectly gradual taper is an incredibly important component in the electric guitar. 
I've been a lazy person in terms of writing product reviews, but had to chime in on the Epiphone LP purchase. First of all, I did research on new guitar options at the local Guitar Center website and settled on this instrument. They had it for $199, so for kicks I looked on Amazon two nights before I had planned to test and buy at our GC on a Sat. Amazon had it for $159 and $199 for lots of extras. I already had a case and nice Marshall Amp, so only needed the guitar. The best part, it arrived on Sat about the same time I would have purchased locally. The reviews were so good, I was not worried about testing live before purchase and it was a great choice.
Since you're a beginner, lighter strings are probably going to be easier for you to play until you get your fretting hand built up with permanent callouses and finger strength. I would advise buying 9-42 gauge strings even if that's not what your guitar came with originally - if it had 10's on it from the factory, the 9's will feel slinkier and more forgiving on your hands.

Tube amps use the height of the 1940s electronic technology to give out what is widely considered the best sound quality to date. Since some people tend to be confused by this, it’s important to note that only their sound rendering circuitry is based on vacuum tubes (or lamps) while the equalizers and assorted bits employ transistors like any other piece of modern electronics, with no bearing whatsoever on how the sound will come out.

{"eVar4":"used: amplifiers and effects","eVar5":"used: amplifiers and effects: amplifiers","pageName":"[gc] used: amplifiers and effects: amplifiers","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop18":"skucondition|0||creationdate|1","prop2":"[gc] used: amplifiers and effects: amplifiers","prop1":"[gc] used: amplifiers and effects","prop17":"sort by","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: amplifiers and effects: amplifiers","prop6":"[gc] used: amplifiers and effects: amplifiers","prop3":"[gc] used: amplifiers and effects: amplifiers","prop4":"[gc] used: amplifiers and effects: amplifiers","channel":"[gc] used","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] used"}
Harmony was the largest US guitar manufacturer between the 1930s and late 1960s. At the height of the guitar boom in the mid-1960s, Harmony was building more than 1000 instruments per day. Not only were they producing Harmony-branded guitars, there was a time when the Chicago-based factory was making guitars for 57 different brand names and trademarks. At one point, Harmony was selling 40 percent of their guitars through Sears & Roebuck under the Silvertone brand.
{"product":{"id":"113900398","stock":"instock","price":"179.99","name":"Vintage 1960s Decca DM1-204 Natural Acoustic Guitar","download":false,"sku_id":"113900398","checksum":"134135816000","rep_id":"site5113900398","displayId":"113900398","sku_display_id":"113900398","sku_rep_id":"site5113900398","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
When two sine waves with frequencies A and B are ring-modulated, the output will also contain the frequencies A+B and B-A. If frequency B is not a multiple of A, these additional frequencies are inharmonic; e.g. ring-modulating sine waves at 1000Hz and 1250Hz will add the frequency 2250Hz, which is neither a multiple of 1000Hz, nor of 1250Hz. When more complex sounds are ring-modulated, sums and differences of all the harmonic frequencies are added.
I one day hope to be the man my dog thinks I am.WORDS OF WISDOM FROM VARIOUS MEMBERS"most often the guitar will rise or fall to the level of the player""people overthink ****************""Sometimes you gotta know when to shut the **************** up and have a little class. Not you, you're special.""If it sounds good to you then it sounds good"The bull**************** and myths in the guitar world are stacked very high.
Probably also new in ’39, though it could have been available as early as ’38, was the Supro No. 50 amplifier. This was a typical Supro rectangular cabinet, now with a round grillcloth broken by two horizontal strips of wood. A Supro logo plate sat on the upper left corner. It had a flat leather handle and five tubes putting out 12 watts through a 10″ speaker. There were two inputs, an on/off switch and volume control. Cost was $50.
Tempo Delay: Most plug-in and hardware delays now allow you to automatically sync delay times to MIDI clock and then specify the interval of the repeats in terms of note values rather than milliseconds. A trick here is to use two simultaneous tempo-based delays with, say, a triplet delay setting, panned hard left, and a straight-note delay panned hard right. Things can get more interesting still if you apply this technique using ping-pong delays, so that alternate repeats bounce from one side of the stereo spectrum to the other. To create a true 3D effect, play around with the amount of original signal left in the middle. Depending on the intervals between your repeats, you can turn simple guitar and synth lines into complex, arpeggiator-like patterns or totally spaced out ambient pieces. Stephen Bennett
Description: 1997 Non Left Handed Model. Body: Laminated Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - String Instrument Finish: Ebony, Natural, Vintage Sunburst
Not something you have to think about with an acoustic guitar, the electrics in an electro acoustic are quite important, though not as critical as with an electric guitar. You’ll want to make sure that you’re getting a good quality pickup and preamp, and then the next thing to consider will be features. Preamps often come with EQ adjustment to alter the tone slightly, and some will even come with certain effects that you can add on. Builtin tuners are a common addition too which mean you don’t need a separate tuning box.
Thanks. It sounds good without tone shaping ability but I wanted to hear the original sounds. It now has 2 capacitors tied together from the volume pot to 1 tone leg. I am guessing the original tone switch was wired with one cap. for the low & one cap. for middle and the 3rd tone leg was straight wired for treble high. I also wonder how the ground sweep worked on the tone selector?? I just need to know. I’m a DIY guy.
Best Answer:  First, make sure you have new or clean strings that aren't dead. You should hear a metallic harmonic overtone to picked notes particularly on the low E, A, and D wound strings. If your low E sounds in tune but makes a flat dull boww boww boww instead of dang dang dang when you pick change them. Set your amp up for a fairly bright sound clean, playing off the bridge pickup. Make sure the guitar volume knob(s) are rolled all the way on and tones are all the way up, no roll off. If you can't get a nice clear clean sound that doesn't sound distant and muted then you have some issue with the guitar electrics or amp. If you're playing off the neck pickup that's a big muddier right there. The neck pickup is good for clean rhythm playing, jazz, and for a hollow warm tubey sound on single notes but tends to muddy overdriven power chords. Once you have the amp set for a bright clean sound that's not too brassy (if it has a master volume in addition to a gain or channel volume set the gain or volume low for a clean sound and use master for output level, let the RP90 do the effects work, not the amp preamp for now.) bring in the RP90. I'm not familiar with it but try it on a few overdrive and distortion settings. If you've only been an acoustic player high overdrive or distortion "power steering" takes a different play style.
Double-coil or "humbucker" pickups were invented as a way to reduce or counter the unwanted ambient hum sounds (known as 60-cycle hum). Humbuckers have two coils of opposite magnetic and electric polarity to produce a differential signal. Electromagnetic noise that hits both coils equally tries to drive the pickup signal toward positive on one coil and toward negative on the other, which cancels out the noise. The two coils are wired in phase, so their signal adds together. This high combined inductance of the two coils leads to the richer, "fatter" tone associated with humbucking pickups.
×