If you can’t commit hours of your time to tracking down the right electric guitar amp, we listed here a number of good ones that are varied enough to fulfill most requirements. Among these, we found the Vox Pathfinder 10 Denim to make a great choice for those that are just getting into playing guitar or who just need a good, inexpensive practice amp. It’s solid-state, so you won’t have to blow your money on replacing lamps and this will also make it easier to tweak its voice to whatever tune you want to try out. Folks who use it appreciate that resembles the overdrive on a lamp amp pretty well and at 10 W of power it can be used from a garage without any complaints from the neighbors. If this isn’t available, The Blackstar IDCORE10 will offer similar quality and even more of a possibility to play around with sound effects.
We've had a thread here in the last couple months about Squires, with some pretty discerning forum members praising their quality and tone. You don't need to spend a lot of money these days for a good guitar. The one the OP bought was years ago. The fierce competition in the guitar market since the economy went bad, has forced manufacturers to up their game, and recent production is of a much higher standard.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars: epiphone","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"epiphone","prop5":"[mf] shop: guitars: electric guitars","prop6":"[mf] shop: guitars: electric guitars","prop3":"[mf] shop: guitars: electric guitars","prop4":"[mf] shop: guitars: electric guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category"}
Before diving in, it’s also worth mentioning the “crap in, crap out” rule, which dictates that any recorded track is only going to sound as good as the guitar and amp that it captures, however good your mic or skilled your engineering. You can’t expect elevated studio technique to convert junk tone or a mediocre performance to stellar sounds in the mix; the best you can hope for is to accurately capture the sound being made by your amp, and to do so with optimum depth, dynamics, and fidelity. Of course, it’s possible that the crappy, low-grade junk tone you capture from a scuzzball rig is exactly what the recording demanded (Jack White or Dan Auerbach, anyone?), but it will usually benefit the tune to capture it as powerfully as you can!

Where you let the overdrive or distortion fill out the tone generated by only three notes. Mess around with different pairs of notes and you'll soon find what sounds good with distortion and what sounds harsh and dissonant. A simple root fifth octave triad is the bread and butter of overdrive and distortion playing. Sometimes if you have a lot of gain on a hot distortion setup you may need to roll off the highs a bit as the high end harmonics can get a bit too brassy on top and harsh on your ears. Have a blast.
Make sure that only the notes you deliberately play actually sound. Guitar strings aren't isolated systems like the tone generators of a synthesizer; if you simply leave them open they may ring even though you've never actually played them. Always watch out carefully for such “rogue sympathetic vibrations” and make sure you properly stop strings that sound in unintended ways.
By placing two (or more) mics at different distances and angles from your speaker cab you will get two different sounds - and more variation will of course depend on whether these are the same model of mic, or different models. Mics placed further away will capture more room tone, and close mics are more upfront. Angled mics offer a less direct sound. Capture both feeds and blend or select from the two after recording.
The GrandMeister Deluxe refines the German firm's best-selling compact head, with four flexible channels and a host of built-in effects. Just about everything is MIDI-powered, so you can edit and store presets to your heart's content. The rear panel includes the latest Red Box recording output, and there's also a new improved iPad app that you can use to edit and store presets, either at the end of a lead or using a wireless MIDI adaptor. The GrandMeister Deluxe 40's four channels sound quite different from those of its predecessor: they're more balanced, with slightly less treble emphasis and a smoother but no less powerful bass response. There's plenty of headroom on the clean channel, which dovetails seamlessly with the higher-gain crunch channel. Both clean and crunch are very tweed-influenced, dominated by a warm midrange that's equally flattering to humbuckers and single coils, especially when boosted and laced with a little of the GrandMeister's digital reverb, which can be combined to taste with delay, chorus, flanger, phaser or tremolo. The two American-voiced lead channels have all the gain you could possibly need for almost any musical genre, from classic rock to modern drop-tuned metal, with a nicely sculpted top-end that squeals and snarls on demand. As a do-it-all tool the GrandMeister 40 takes some beating. All of its many features work efficiently and it's hard to point the finger at shortcomings, because there really aren't any.

Everything about the shape and feel of the S6 Original is meant to be as close to familiar acoustic guitars as possible, including its playability, which is brought about by its 25.5" scale length, 1.8" nut width and 16" fingerboard radius. Tone wise, you're getting a crisp yet warm tone thanks to its pressure-tested solid cedar top, which also adds to the overall earthy appeal of the instrument.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: epiphone","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Many musicians find it helpful to be able to plug in and amplify their acoustic guitar. So, how does an acoustic-electric guitar work? These guitars boast the addition of a pickup system inside the body that turns the vibrations of the soundboard into electronic signals. These signals can be weak, so most acoustic-electric guitars use a preamp to make them stronger.
PRS S2 Vela comes as one of the more extraordinary models in this company’s lineup. This is made apparent by the body shape that stands out from their usual designs. When I had some one-on-one time with this axe, it left a good impression. One thing that really stuck with me was just how light it was. That usually means a thinner tone, but not with this PRS. It plays great, and is pretty smooth.

Besides its classic vibe, the best part about this guitar may be its Broad’Tron pickups. These were designed specifically for the Streamliner, and are known for their throaty midrange, booming lows and sparkly highs. They’re also louder than Gretsch’s other popular pups, the Filter’Tron, so push them hard and they’ll snarl and scream. Dial back the volume knob, however, and you’ll encounter the warmth and rounded tone for which Gretsch hollow-bodies are known.
Planning for this review started right after the January 2018 National Association of Music Merchants (NAMM) show in Anaheim, California. We didn’t notice any significant introductions in the under-$200 electric guitar category during our time there, but new guitars can appear at any time. We’ll be watching out for them, and we’ll get our hands on them as soon as we can.

It was shortly after the debut of the first Supros that National Dobro entered a period of major transition. By 1935, at least, the company had decided to abandon the sunny beaches of L.A. for the freezing winters of Chicago, then the principal home of America’s instrument makers, and not coincidentally, America’s giant mass merchandisers Montgomery Ward and Sears. Both Wards and Sears had been offering National and Dobro resonator guitars since the late ’20s. Being in Chicago had the obvious advantages of proximity to the resources surrounding the business and being next door to the world’s two largest retailers of the day. The move to the Midwest began early 1936 and took almost a year and a half. Throughout most of ’36, the majority of production continued in L.A.
A few years ago I wanted a mini/parlor guitar. I tried a few, did not like what I heard in the Taylor line and I did not want another Larrivee. The irony of it is, I did buy a Taylor and now realize it was because it sounded like a Larrivee, bright and even. This is an anomaly Taylor, I know that now. I bought a Larrivee Parlor which is okay but I also have learned that I am not a parlor, mini fan. They, for the most part, do not deliver an even enough sound for me. I have played Lowden, Martin, Gibson, Guild, Olsen, Huss and Dalton. I recently played an Irvin guitar. Wow, what a beautiful line of guitars. I want one. It is my next guitar with its sustain, consistency, brilliance and ease of ...more

Michael Bloomfield is credited with Eric Clapton for helping seed the renewed interest which compelled Gibson to return the original Les Paul to full production; both musicians began using Les Pauls at about the same time. Bloomfield first played a 1954 Les Paul goldtop (with the strings wrapped around the tailpiece rather than suspended and intonated over a bridge) while with the Butterfield Blues Band in 1966, but he swapped the guitar (plus $100) to guitar technician Dan Erlewine in exchange for a 1959 Les Paul Standard. This guitar was characterised by mismatched volume and tone control knobs (a reflector-topped “tone” knob for the bridge pickup volume, two top-hatted knobs for neck pickup volume and bridge pickup tone, and a cylindrical “speed knob” for the neck pickup tone), a missing cover on the rhythm/treble toggle switch, a truss rod cover with “Les Paul” engraved in script (this feature had originated with the early Les Paul SG models, not the original Les Paul single cutaways), and a crack in the wood behind the tailpiece. Because the guitar was lost in the 1970s (Bloomfield biographers Jan Mark Wolkin and Bill Keenom, in Michael Bloomfield: If You Love These Blues, disclosed that a Canadian venue owner claimed it as compensation after Bloomfield missed a scheduled performance and never reclaimed the instrument), Gibson used hundreds of photographs of the late blues guitarist’s instrument (and consulted with Bloomfield’s family) to produce the limited-edition Bloomfield signature. The company produced one hundred Bloomfield models with custom-aged finishes and two hundred more with the company’s Vintage Original Specifications finishing in 2009. They reproduced the tailpiece crack on the aged version, plus the mismatched volume and tone control knobs and the “Les Paul”-engraved truss rod cover on both versions, while including a toggle switch cover. The headstock was characterised by the kidney-shaped Grover tuning keys installed on the guitar before Bloomfield traded for it, and the pickups were Gibson Burstbucker 1 (at the neck) and Burstbucker 2 (at the bridge).

The Rolls-Royce of multi-effects pedals is the Line 6 POD HD500X. As far as the top 5 pedals in this guide, the HD500X is the most full-featured, most complex, and also the priciest. Despite carrying a higher price tag than the others, it comes very highly recommended and landed a solid second place on our list, and this is mostly due to two things:
However, if you want a small guitar that will give the quality of sound you might expect from a larger guitar, or if you are considering this style as the first beginner guitar for a child or student, you may want to consider other models that are more typical of a guitar suitable for learning, recording or for growing and developing better skills.
Three recording sessions between 1936 and 1937 produced 29 songs, including the verifiable classics “(I Believe I’ll) Dust My Broom,” “Sweet Home Chicago,’” “Walkin’ Blues,” “Love in Vain” and “Crossroad Blues.” His popularization of cut boogie patterns presaged electric Chicago blues and rock and roll, while his fretted and slide guitar licks are so timeless that they still show up in contemporary music.

 An enduringly popular effect, with all sorts of uses for vocals, drums, guitars and synths, is genuine reverse reverb. This is where a reverb tail appears to increase in volume ahead of the sound that gives rise to it — a completely unnatural sound and something that's impossible to create in real time. It's easy enough to do in a DAW application though. First, find the section of audio you want to treat and reverse it. In the DAW I use, Digital Performer, there's an offline plug-in for this. Now apply conventional reverb to this 'backwards' audio — either by playing it through a reverb plug-in and recording it to another track, or by rendering it using an offline process (if your DAW offers this). In either case make sure you allow enough additional time at the end of the audio to capture the full, final reverb tail. In the screen grab I've done this by allowing 1500 milliseconds of post-roll processing.

Few guitarists play slide guitar with more raw emotion or feeling than blues legend Muddy Waters. There’s perhaps nobody more important to the electric blues idiom, of which Waters became the primary spokesman. His playing was raw, dirty, raunchy, and everything else that makes the blues as great as it is. He undoubtedly inspired every great blues guitar player that came after him.
BOSS also has a few pedals that make your instrument sound like some other instrument. The AC-3 Acoustic Simulator will do the job. Some effects change your sound with filtering. This effect type can be used in different places in the signal path, so we’ll use the GE-7 Graphic EQ. A few BOSS effects defy categorization, but are nevertheless very useful in any signal path. The most common of these is the CS-3 Compression/Sustainer.
This vintage Teisco Del Rey Japanese guitar was made in the 1960s and has a classic sunburst finish and tulip shaped body. Manufactured in Japan by the Tokyo Electric Instrument and Sound Company (yeah, you got it…TEISCo!), the Del Rey measures 37 3/8 inches x 11 1/4 inches at widest and longest points. The fretboard measures 18 3/8 inches in length from the nut to end. My dad bought this one from some guy at his work, who later supplied him with the original whammy bar and headstock hardware which he found later! The relatively small body size of the Teisco Del Rey was appealing to my wife, who was on the lookout for a smaller-sized guitar she could play. My dad replaced the original tuning pegs with much nicer chrome ones from a 1980’s Gibson SG and we took it home. However, she realized that she didn’t care much for electric guitar, so we decided to clean it up and sell it. Everything was in excellent shape, but it did have some electrical issues. The volume/tone pots were filthy and you could hear a wall of white noise as you turned the knobs. At the time, I didn’t know the marvels of Deoxit and contact cleaners, so I didn’t know how easy it would have been to clear that problem up. One of the pickups or pickup selectors also didn't seem to be working. It played OK without noise or distortion when the volume and tone knobs were set to 10 and the pickup selectors set to "black up, white down", but the sound could still fade in and out sometimes if you bumped the buttons or switches the wrong way. Again, simple issues that I could have cleared up with a soldering iron and contact cleaner. In any case, we meticulously cleaned it and put it up for auction. Despite the minor problems, a bidding war ensued and now this Teisco Del Rey Japanese guitar lives in Australia! Overall, the Teisco is a good playing trashy guitar with loads of funky style. Scroll down for more Japanese Guitars from our collection!
Visually, what sets this guitar apart is its distinct headstock shape, but there's more to this guitar than meets the eye. Firstly, the guitar's top is crafted from solid cedar, an interesting wood choice because this type of wood is more commonly used on nylon string guitars. The warm tone of cedar matches nicely with the bright sound of wild cherry, a staple tonewood used on the back and sides of most Godin guitars. This combination gives the instrument a more distinct appearance and sound. Other features that don't follow the usual convention include the use of maple for the neck, and its B-Band M-450 T preamp system.

When it comes to guitar amplifiers, especially the ones that we love here at PMT, “cheap” doesn’t mean poor quality! Thanks to huge leaps in manufacturing processes, stringent quality control and the fact brands really care about the products they create, you can spend far less on an amplifier and musical instrument these days and still get a fantastic, highly playable and superb quality option for your needs.

While most single-coil pickups are wired in parallel with each other, it is possible to wire two or more of them in series, producing a fuller and stronger sound not unlike that of a humbucker.[26] This is a popular modification for instruments with two single-coil pickups like the Fender Telecaster and the Fender Jazz Bass. For the former, special 4-way switches are available to replace the stock 3-way switch and provide a series wiring position.[27]
The blues was my inspiration-specifically, the late-'40s solo recordings of John Lee Hooker. "Hobo Blues" is an excellent example of early Hooker on which his violent string slapping-clearly audible in a blend of amp sound, haunting vocals, and trademark foot stomping-creates an indelible realism and engaging intimacy. My recording of Paris Slim's "The Day I Met The Boogie Man" (see the sidebar "Selected Discography") was one of my early experiments with this technique. Since that time, I have used a discrete "air-guitar" mic whenever I have had an available track for it. Guitarists may initially be skeptical of such unusual miking, but it's always a treat to watch their faces light up as they listen to the monitors deliver the bright, transient sounds that they have been accustomed to hearing during their years of practicing their instruments.
Dobro was founded by John Dopyera and a brother after he left National Guitar in 1928. The history of Dobro and National is long and complicated. Dobro merged with National in 1934. They contracted with Regal to build their guitars and for a time Regal was the exclusive builder of resonator guitars. They lost the rights to the names during World War II which led to a number of other names. The Original Musical Instrument Company was the last name used with Hound Dog being a brand of resonator guitar when Gibson eventually purchased them in 1994. Gibson currently sells Dobros (single cone, spider bridge resonator guitars) and Hound Dog brand guitars. Epiphone has also made resonator guitars.
At the top of the fingerboard, just below the headstock, is a slotted piece of material called the nut. The strings are routed through the slots in the nut and terminate at the bridge, located on the far end of the body. When the strings are plucked or strummed, they vibrate between the nut and the bridge. This vibration is where the sound of a guitar begins. How that vibration translates into sound depends on whether the guitar is acoustic or electric, as we’ll see in a moment.
Collectors grade 1964 Harmony H-59 Rocket near mint condition. These guitars are so hard to find in this excellent condition. This one is a 9 out of 10. Great action, straight neck, Gold Foil Pickups, and that rocket look too. She has a few very small edge nicks on rear of headstock, a few slight tiny cracks on center of back in grain, and one small edge ding. Also some very slight age checking but this guitar looks great! All are nothing to be alarmed about and not obvious when looking at guitar. This is the finest example of an H-59 we ever came across. Guitar is completely original with great color and grain. Comes with chipboard period case. Just reduced to $1,299.99 complete.

The ’38 Supro line contained two lap steel models, still made of wood, but substantially different from the model seen in the ’38 Sorkin/’39 Grossman catalogs. The Supro Avalon Hawaiian Guitar had a rectangular body with rounded corners and two concave “cutaway” shoulders. The head had a slight curve to it. The fingerboard was made of polished aluminum, and the guitar was finished in gloss black. An enameled handrest covered the single pickup and strings passed into a slotted rectangular metal tailpiece. On either side of the fingerboard, just above the handrest, were two square plates embossed with the Supro logo and containing one control knob each, for volume and tone. Without case this cost $40. Note that this was the first appearance of tone controls on Supro brand guitars.
Unfortunately, a few years prior, we were playing in a festival where there were many bands. THAT soundman flat out refused to use a direct signal and insisted on mic’ing my cabinet. I had spend MONTHS designing and programming my TWO preamps, one for the stage and the other for the board… certain effects were sent to one and not the other… My whole sound was based on two pre-amps running at the same time. This is about as close as I’ve come to physically punching anyone. I told him to plug in to the XLR output right “there.” He wouldn’t… made excuses as to not knowing which channel on the snake ithe other end was plugged into. (That made no sense at all… wouldn’t he know which channel the MIC was in? All he had to do is remove the mic, plug that end of the cable into the output of my unit.) Weeks later, people in the audience commented to me that they remembered that I played and sang the gig “fuming” over something. Half of my sound wasn’t there AT ALL.
The American David Schecter founded his company in 1976 in order to produce spare parts for guitars already available (especially Fender and Gibson). But since 1979 the brand has been manufacturing its own guitars. In the beginning they had only Fender-based models but nowadays, Schecter guitars are clearly conceived for hairy players (but not exclusively), with models like the Hellraiser or the Damien. Among their most famous users are Billy Corgan, Eddie Vedder, Pete Townshend, Mark Knopfler, Matthew Bellamy... And the brand also presented its first amps at the latest NAMM show.
Now, I'm sure that you're all sensibly busying yourselves with making music, so your lives are, frankly, too short to be sifting through more than a half a million words of interviews. Therefore, I'm going to try to digest what I've discovered during this process for the benefit of those less sad than me! I'm not about to dictate which technique is 'best', though, because if reading this many interviews has taught me anything it is that people will always disagree on what constitutes a great sound. Instead I've recorded a number of different audio examples to allow you to judge for yourselves, just as I did, which techniques are likely to make a real difference to your own productions. I've peppered this article with a number of boxes giving details of these files.
Conceived in the early 1930s, the electric guitar became a necessity as jazz musicians sought to amplify their sound to be heard over loud big bands. When guitarists in big bands only had acoustic guitars, all they could do was play chords; they could not play solos because the acoustic guitar is not a loud instrument. Once guitarists switched from acoustic guitar to semi-acoustic guitar and began using guitar amplifiers, it made the guitar much easier to hear, which enabled guitarists to play guitar solos. Jazz guitar had an important influence on jazz in the beginning of the twentieth century. Although the earliest guitars used in jazz were acoustic and acoustic guitars are still sometimes used in jazz, most jazz guitarists since the 1940s have performed on an electrically amplified guitar or electric guitar.
There are two main types of controls on bass amps: switches and rotary knobs. The simplest, least expensive practice amps and combo amps may only have a few switches and knobs, such as an "on/off" switch, a volume knob, and a bass and treble control knob. Mid-priced models may add additional tone controls (e.g., one, two or three "midrange" controls and a "presence" knob for very high frequencies) and/or add a second type of volume knob called a "gain", "preamplifier" (or "preamp"/"pre"), or "drive" (short for "overdrive") control. A good selection of equalizer knobs and gain stages is standard on expensive amplifiers. If an amp has one or more preamp or gain knobs, the second volume knob may be called "master", "volume" or "post".
“This is a very complicated mix of economy versus market, demand versus what products are they putting out, versus are their products as good as they used to be, versus what’s going on with the Internet, versus how are the big-box stores dealing with what’s going on,” Smith says. “But I’ll tell you this: You put a magic guitar in a case and ship it to a dealer, it will sell.”
SOLD OUT : A real find this one is... not your average vintage Takamine you will soon see its also in amazing original superior condition .. this premium example was hand built by the finest Japanese Luthiers at Takamine Gakki. This prime example is the finest Exotic Brazilian Rosewood we have had in yet and we have had some duzies for sure this true Law Suit era Takamine F375S acoustic guitars we have ever had! wow.. and exact copy of the Genius original Martin design of the D-28 exotic....WoW.. the frets look almost new, Martin bone nut and saddle the "s" stands for solid construction and the Solid Sitka Spruce top is super nice amber with age now over the past 37 years and taken care of this California native guitar exhibits its premium exotic woods very proudly just have a look all round everywhere you look...from the amazing Brazilian rosewood sides & the back is A Gorgeous 3-piece back with intricate inlay work to the premium solid mahogany neck..fit & finish is simply put gorgeous. The neck is nice & straight with a perfect Martin like medium V profile 1-11/16ths @ the nut - the action is very good 3-16th @ 12th fret you can adjust either way to taiste no problem and with the bone nut and saddle this guitar has wonderful tone right up there with the Martin or Yairi this guitar is AAA professional grade vintage and is in 100% condition it is not new or mint with minimal dings its condition is JVG Rated as 9.5 / 10 - excellent vintage = beautiful and exotic... please see the pictures for the cosmetics..these Takamine are built as good or better than the Martin it copies the back is quad braced and the reinforced crossbracing of the top should make this finely built instrument last several lifetimes.. Your looking at the best of the best in Japanese vintage exotic & solid construction in astoundingly nice condition...you simply must play and hear this guitar we love it and so will you.. I can't amagain a cleaner example of this vintage you will not be sorry... exotic Brazilian Rosewood tone woods are the best of the best. No need to spend $3000 or even $5000 or more for such an exotic vintage 40 + year old Martin d28....Find it here Email: gr8bids@comcast.net ..
The pickup itself consists of a long magnet, or a number of cylindrical magnets in a row, around which is a wire coil. The vibrations of the electric guitar’s strings cause changes in the magnetic field of these magnets, which in turn is able to induce a current in the coiled wire. This current is then passed on to the amplifier, which produces the sound. The stronger the magnets used in the pickups, the more sensitive they are to the string’s vibrations.

Efficiency – also called sensitivity this is measured in dB at a distance of one metre. This has more to do with how loud a speaker sounds than its power rating. A Jensen P10R, for example, is rated at 95dB; a Celestion G12 65 at 97dB and an EVM12L at 100dB. The numbers don’t look that different, but the difference in terms of perceived volume is truly staggering.
Dive bomb is a guitar technique in which the tremolo bar is used to rapidly lower the pitch of a note, creating a sound considered to be similar to a bomb dropping. One of the most recognized pioneers of this technique is Jimi Hendrix. Other notable musicians who are widely known for using this technique are Eddie Van Halen and Joe Satriani. - winner333
A chorus effect alters the duplicated waveform in a more subtle, nuanced way. The altered waveform will sound much like the original, but just different enough to sound like multiple voices playing the same note or notes. As it is usually applied, chorus sounds like the same signal running through two amps with a very slight delay between them. In fact, Pat Metheny's famous chorus sound is produced in exactly this manner, using no actual chorus effect at all.
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it.  Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low!  Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone.  I was so happy and asked him how much, he said it was easy so he didn't want take any money.  But i have him some coffee money and he said it was too much, I said it was for a week and he laughed.  My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems.  Steve is a hidden gem in the Boston guitar world.
{ "name": "Emerald Blue", "skuUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar/l21430000003000", "status": "backorderable", "statusText": "Back Order", "pimStatus": "R1", "inventoryText": "Reserve now - Ships 11-28-2018", "inventoryKey": "available_date", "availableDate": "11-28-2018", "price": 999.99, "formatedIntegerValue": "999", "decimalValue": "99", "isOnSale": false, "msrp": 1430.00, "salePrice": 999.99, "listPrice": 999.99, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuL21430000003000", "displaySku": "L21430 000003000", "serialized": false, "stickerDisplayText":"Backstage Pass Members Earn 12% Back In Rewards On This Item", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/L21430000003000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"12-08-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Fullerton-Standard-Legacy-Electric-Guitar-Emerald-Blue/L21430000003000-00-140x140.jpg", "styleImgAlt": "Fullerton Standard Legacy Electric Guitar Emerald Blue", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"12,000", "pdpLoyaltyPointsMultiplier":"1.5", "checksum":"581797334923", "restrictionType":"", "restrictionError":"" }
If you stick to a simple chromatic scale (all the semitones), you also run the risk of the pitch correction moving the audio to the wrong note if the singer is more than half a semitone off pitch. A user scale, containing only the desired notes, generally works much better. Some systems also allow you to dictate the correct notes via MIDI. If the song contains sections in different keys or that use different scales, it is often simplest to split the vocal part across several tracks and then use a different pitch-corrector on every track, each one set to the appropriate scale for the section being processed.
To be able to buy a name brand guitar like this at such a great price was a real steal. One of my sons is a beginner learning to play, so it was great for me being able to purchase a guitar like this that would carry him from beginner into an intermediate player in later years. It is a well-made and beautiful guitar, and it produces a wonderful sound that you would expect from a name like Fender. Plus, with my son being left-handed, I thought it would be difficult to find a good affordable left-handed guitar for him. Not only was able to find this high quality one, but the price couldn't be beat.
If you’re looking to get this pedal as a first in your arsenal, then don’t worry at all, you can keep it simple with the offered Reverb dial as it offers high-quality effects which you can tune to your liking. This astonishing “stomp-box” by TC covers guitarist’s needs who possess different ranges of experience, all available at a fantastic startup price.
When you’re talking Gibson, mahogany is frequently going to factor into the brew. And that’s a wonderful thing. This is the classic ingredient of the multi-wood body, and one of the most common neck woods also, but is very often used on its own in single-wood bodies. On its own in an SG, Les Paul Special, or Les Paul Junior, mahogany’s voice is characteristically warm and somewhat soft, but extremely well balanced, with good grind and bite. It has the potential for good depth, with full (though not super-tight) lows, velvety highs, and a slightly compressed response. Overall, think round, open, warm.
A boost pedal is one of the most useful pedals one can have. Simply put, it boosts the signal that goes into it. It can perk up a low output guitar, or bring out more character or a different quality to your amp. This is especially useful for solos where overdrive or distortion would overwhelm the tone you've got. Boost adds more “you” to the sound. Look out for what tone the boost adds, like treble or mids before purchasing. Some boosts claim to be transparent, maintaining the same EQ of your original tone, while others spike a certain part of your EQ intentionally.

Clarence White helped shape two genres: His acoustic flatpicking, first displayed as a teenager when he and his brother formed the Kentucky Colonels band, was key in making the guitar a lead instrument in bluegrass. Later, he set the stage for country rock and transferred that dynamic precision and melodic symmetry to the electric guitar. A top session man in the Sixties, he played on the Byrds' 1968 landmark, Sweetheart of the Rodeo. After he joined the band later that year, White brought a full-bodied rock elation to his California-inflected Nashville chops. "He never played anything that sounded vaguely weak," said the Byrds' leader, Roger McGuinn. "He was always driving… into the music." White had returned to bluegrass with the acclaimed Muleskinner album when he was killed by a drunk driver in 1973. He was 29. "Clarence was immersed in hard country and bluegrass," said Dan Auerbach of the Black Keys. "He incorporated those elements into rock & roll, and it totally blew people's minds."

Should space restrictions or volume levels make these methods impractical, try adding an air-guitar part as an overdub to a conventionally miked guitar track. The principle is similar to vocal doubling, for which the same part is performed twice; you may not be able to do this for an improvised solo, but for rhythm parts or composed lines, it's a snap. In addition, double tracking with a bright acoustic guitar or a smooth-sounding hollow body will add extra richness and some slick, big-budget zing to your mixes.

On the extreme end of things, adding a lot of reverb to your tone can create large, expansive soundscapes where the notes are less distinct and everything forms one carpet of background sound. Reverb pedals often have a number of controls, from the most basic knobs controlling the volume of the effect (known as “mix”, or how much reverb is mixed into your guitar signal) and the length each note reverberates for (known as “decay”), to more versatile pedals that have controls for different kinds of reverb such as “small room”, “plate” and “arena”.
The GrandMeister Deluxe refines the German firm's best-selling compact head, with four flexible channels and a host of built-in effects. Just about everything is MIDI-powered, so you can edit and store presets to your heart's content. The rear panel includes the latest Red Box recording output, and there's also a new improved iPad app that you can use to edit and store presets, either at the end of a lead or using a wireless MIDI adaptor. The GrandMeister Deluxe 40's four channels sound quite different from those of its predecessor: they're more balanced, with slightly less treble emphasis and a smoother but no less powerful bass response. There's plenty of headroom on the clean channel, which dovetails seamlessly with the higher-gain crunch channel. Both clean and crunch are very tweed-influenced, dominated by a warm midrange that's equally flattering to humbuckers and single coils, especially when boosted and laced with a little of the GrandMeister's digital reverb, which can be combined to taste with delay, chorus, flanger, phaser or tremolo. The two American-voiced lead channels have all the gain you could possibly need for almost any musical genre, from classic rock to modern drop-tuned metal, with a nicely sculpted top-end that squeals and snarls on demand. As a do-it-all tool the GrandMeister 40 takes some beating. All of its many features work efficiently and it's hard to point the finger at shortcomings, because there really aren't any.
An electric guitar works on the principle of electromagnetic induction. This means that an electric guitar has electromagnets in its system which generate magnetic fields. Apart from this, an electric guitar has an amplification system which amplifies the sound waves generated by the guitar’s string. It is this combination of electromagnetic induction and amplification system that makes an electric guitar run.
Portable speaker chambers represent another viable solution. These units are thick, reinforced wooden boxes outfitted with both interior and exterior insulation, housing a built-in speaker and an adjustable microphone stand, along with speaker and microphone cable connectors. Think of a miniature portable iso-booth. They're used professionally in the studio and on stage, preventing unwanted leakage and greatly diminishing stage noise, with excellent results.
{ "thumbImageID": "Bullet-HSS-Stratocaster-Electric-Guitar-2-Color-Sunburst/H99380000001000", "defaultDisplayName": "Squier Bullet HSS Stratocaster Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Metallic", "sku": "sku:site51372088762678", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Squier/Bullet-HSS-Stratocaster-Electric-Guitar-Black-Metallic-1372088762678.gc", "skuImageId": "Bullet-HSS-Stratocaster-Electric-Guitar-Black-Metallic/H99380000003000", "brandName": "Squier", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Bullet-HSS-Stratocaster-Electric-Guitar-Black-Metallic/H99380000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "2-Color Sunburst", "sku": "sku:site51372088762608", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Squier/Bullet-HSS-Stratocaster-Electric-Guitar-2-Color-Sunburst-1372088762608.gc", "skuImageId": "Bullet-HSS-Stratocaster-Electric-Guitar-2-Color-Sunburst/H99380000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Bullet-HSS-Stratocaster-Electric-Guitar-2-Color-Sunburst/H99380000001000-00-60x60.jpg", "imgAlt": "" } ] }

The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.
Eight-string electric guitars are rare but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars. The largest manufacturer of eight- to 14-string instruments is Warr Guitars. Their models are used by Trey Gunn (ex King Crimson), who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars, and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the seventh and eighth strings. Stephen Carpenter of Deftones also switched from a seven-string to an eight-string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK, which is the first mass-produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.
I love this little guitar. it's perfect for my smaller hands to move around on the fretboard. I've been taking guitar lessons for a year and own a full size acoustic and a electric but I love that this one is both. For the price I wish it came with a stand and cable for an amp though but it's a great starter guitar for kids or a person with smaller hands. I would recommend it. it's acoustic and electric. You will need to buy an amp with a cable to use it as an electric but no cable is needed for acoustic. It even has a built in tuner, they supply the batteries.

Those items considered -- performance notation and computational capacity for emulation of stringed instrument sounds otherwise reinforced by the same speaker systems that amplify synthesized sounds -- the other significant factors in the realism matrix involve economics of VST production, listener preferences and, least we forget, performer or producer preferences.
Instrument amplifiers are available in a wide range of price, quality, and performance levels. Some are designed for beginners, such as small, low-wattage practice amps, which typically have a single 8" speaker and about 10 watts, or smaller "combo" amps with relatively low wattage (15 to 20 watts) and a single 10" speaker. Mid- to large-size "combo" amps with 30 to 50 watts and one 12" speaker or four 10" speakers are best for high-volume situations, such as band rehearsals and onstage performances. For large venues, such as outdoor music festivals, guitarists may use one or more 100 watt (or several hundred watt) heads with one or more 8x10” cabinets. Some guitar amps are strongly associated with specific instruments or genres, such as the Marshall amps, which are widely used in heavy metal music.
Pre-delay: No pre-delay? No problem! Some reverb plug-ins, from freeware favourites to tasty convolution types, don't offer pre-delay — a user-configurable gap before the onset of a reverb's early reflections and tail. It's useful to have, though, as it can contribute to the clarity and separation of individual voices and instruments in a mix when large amounts of reverb are used. Using most software DAWs it's straightforward to rig up a pre-delay for a reverb (or any other effect) that doesn't have one. All you do is set up your reverb on an aux track or channel, but place a simple delay plug-in in a slot above it. Set both plug-ins' wet/dry mix parameters to 100 percent wet, and feed them some audio using an aux send on your normal audio tracks. Now the delay plug-in operates as a pre-delay for the reverb: easy! This kind of 'modular' pre-delay actually opens up some interesting possibilities. By using a multi-tap delay, or a simple delay with some feedback, your dry signal can be fed to the reverb several times, making for longer, more complex — or plain weird — reverb tails. Robin Bigwood

While it definitely looks unique with its four sharp edges and sculpted cutaways, this guitar follows conventional super strat design, starting with a basswood body that is joined to a maple neck. For its price, its quite surprising to find that this guitar features a neck through design, which is normally only found on more expensive electric guitars. The 25.5" scale neck is topped by a 24-fret rosewood fingerboard with a nut width of 1.65", providing a familiar shred friendly feel. Giving this guitar its metal friendly voice are two LH-150 Humbuckers that are hot enough for mean high gain metal tones.

PPS: Made from Polyphenlene Sulfide a material commonly used in automobile and computer parts the PPS picks are lightweight but hard enough to ensure picking is strong and precise, so the pick provides accurate attack with a full-bodied tone as it strikes thestring. Silicon rubber based surfacing on each side, makes this pick ideal for fast picking styles. Available in Teardrop and Jazz shapes, and 0.8mm-1.0mm-1.2mm gauges.
Sound engineers prevent unwanted, unintended distortion and clipping using a number of methods. They may reduce the gain on microphone preamplifiers on the audio console; use attenuation "pads" (a button on audio console channel strips, DI unit and some bass amplifiers; and use electronic audio compressor effects and limiters to prevent sudden volume peaks from vocal mics from causing unwanted distortion.

Oh and you play really great sounding exercises in blues, rock and country that encourage you to noodle around and find your own riffs and leads to play over the tracks which is something that I had never really been inspired to do before with any other book. The author doesn't just throw a bunch of tired, boring, public domain yankee doodles and scarborough fairs because he is too cheap to pay royalties or some crappy tunes that a kindergardener could write but actual original pro sounding tunes and riffs. Yes, I HAVE been around my fair share of crappy guitar lesson books, thanks for asking!
Decide between an active and passive DI. The most obvious difference between the two is that an active DI requires a power supply for you to operate, while passive DIs do not. Beyond that, due to differences in design, each of these has strong suits that should be taken into consideration. For example, the transformers used in passive DIs are more resistant to the hum created by ground loops, making these ideal for on-stage performing.[8][9] Additionally:

The HOF is one of the single best examples of a convergence of price and quality features that we've ever been able to find. While we can't mention pricing in this article, we'd recommend clicking through and checking the retail price on the HOF, then comparing it to the other reverb pedals in this list. As far as value, the HOF is nearly a perfect 10.

Who are you to state that Taylor guitars are among the best in the world? Are you from California? I don't and many other don't feel that way. Taylor just does not have the sound of other fine acoustical guitars. I'm not putting Taylor down. It's a well built acoustic but I don't quite like the sound of them. That's a biased and very bold statement you made about Taylor and it's not true. There are so many great acoustic guitar builders around this planet that do build superb guitars. Please, lets not put a Californian Company biasedly on top of everything on the planet. Can we do this please? I apologize for this email but what you stated is so unfair for all of the others guitar companies that build outstanding guitars, worldwide.
In 2010, Gibson USA released the Slash “Appetite” Les Paul Standard as a tribute to Guns N’ Roses‘ debut album, Appetite for Destruction. It resembles the original Les Paul Standards of the late 1950s, including the 1959 Les Paul replica Slash used for the recording of the album. It has a maple top with a nitrocellulose Sunburst finish, rosewood fingerboard with acrylic inlay, and a Slash headstock graphic. It also features Slash’s signature Seymour Duncan pickups.[40] The Gibson Custom Shop introduced the Slash “Appetite” Les Paul Standard. Production was limited to 400, with 100 guitars hand-aged and signed by Slash himself, and another 300 finished with the Custom Shop’s VOS process.[41] Epiphone issued a more affordable version of the “Appetite” Les Paul, production of which was limited to 3,000.[42][43]
As of 2012 Taylor Guitars has more than 700 employees. The company maintains two factories: One in El Cajon, California and the other, 40 miles away in Tecate, Mexico where the entry-level guitars of the Taylor line (the Baby, Big Baby, GS mini, and 100-200 series) are made along with the Taylor guitar cases. In early 2011, the company opened a distribution warehouse in the Netherlands. Also that same year, the company, along with Madinter Trade, S.L., partnered to purchase the Crelicam ebony mill in Cameroon. [6]

When you’re starting to become serious about playing the guitar, the question of “what amp should I get” is bound to pop up. There’s quite a deal of variety out there, with many brands and models, and constant innovation adding new features to choose between with each passing year. It’s enough to baffle even an intermediate player, let alone a rookie who’s just getting started. To ensure that you get the right amplifier for your needs, you’ll first need to know a bit about how the amp’s specifications translate to real life.
Because any acoustic guitar can be made into an acoustic-electric, from what I’ve seen — and this is simply an observation, not a blanket statement — most of these sacrifice both quality of guitar and quality of pickup to sell affordable instruments in the name of convenience. So for the introductory acoustic player, here is my advice: Skip the acoustic-electric section and find a plain ol’ acoustic guitar that you like. When the time is right, plenty of companies make a variety of pickups designed for acoustic guitars, which will give you more options when selecting a method of amplifying your acoustic.

The 85/15 “S” humbuckers here—again, they’re affordable versions of the Custom’s 85/15—are transparent, ‘hi-fi,’ articulate and high-output. Lush while clean and thick when clipped, the pickups have also been coil-split to take you into glassier, single-coil territory. However, you can’t coil-split them individually to form HS or SH combinations, for instance.

• Library content : Choose from 154 patterns covering a wide range of realistic riffs, arpeggios, alternating intervals and chords. The patterns are conveniently grouped into 31 well-coordinated set of presets, suitable for everything from modern pop music to electronics. Autochord mode and convenient presets allow you to execute or program convincing batches of electric guitar, regardless of background music.
Since there are 2 coils, you can have up to 4 wires with which to work, providing you with a great many tone options. Almost all independent pickup companies manufacture humbuckers with 4 conductor cable. Stock guitar humbuckers rarely have 4 wires coming out of them but sometimes it is possible to convert 2 wire humbuckers to 4 wire types. This is an exacting procedure with little room for error but the tone rewards can be well worth the effort. If you really want to give this a try, then click here.

Since we’re talking about acoustic-electric guitars that look as good as they sound, I’d be remiss to not add the Fender Tim Armstrong Hellcat to this list of top acoustic-electric guitars. Based on the infamous 1960’s acoustic played by the punk rock legend Tim Armstrong of Rancid, I could devote an entire article to the artful styling on this guitar, which is why it consistently ranks at the top of acoustic-electric guitar reviews by players of all levels.

{ "name": "Vintage Sunburst", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000004000", "status": "backorderable", "statusText": "Back Order", "pimStatus": "R1", "inventoryText": "Reserve now - Ships 11-05-2018", "inventoryKey": "available_date", "availableDate": "11-05-2018", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000004000", "displaySku": "J40301 000004000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000004000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-12-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Vintage-Sunburst/J40301000004000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Vintage Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }
At one point, Fender switched to producing guitars with the bridge pickup located farthest from the highest-amplitude portion of the vibrating strings, slightly “over-wound”, thus increasing the signal output from that pickup. Even more overwound pickups (“hot-wired” designs) became popular, either for all three pickups (a “hot” configuration), or for the bridge position only (so-called “Texas Hot” due to its popularity among Southern Rock guitarists).
My purpose for the visits were neither to buy, nor to have repaired, an instrument. It was to have the proprietor take a look at the bass that I had build. To give me his opinion and estimation on how I did. He walked through the process I'd used, for defretting, paint stripping, and then staining and poly sealing. Demonstrated how to adjust the truss rod, and complimented me on the work I'd done.

Prior to being acquired by Gibson back in 1957, Epiphone once competed with the most popular guitar brands in the market - including Gibson. These days, Epiphone is known for being the affordable sub-brand of Gibson, producing cost-effective alternatives to many of their premium guitars. Many experienced players today credit this brand for manufacturing their first ever instrument, and their popularity in the entry level market continue to soar high.
The key to capturing any kind of ambient tracks is a good reverberant space, although a narrow or dead room can also work, as long as there is sufficient distance between the guitarist and the amp. I usually put the air mic at least ten feet from the amp, positioned off-axis, or in an omnidirectional pattern to pick up as much reflected sound as possible. Placing a baffle between the guitarist and the amp will increase the apparent room size, as will making the amp sound pass through a doorway or turn a corner into another room.
Here you will find a selection of our most popular brands of acoustic guitars. This range includes Australian manufacturers Maton and Cole Clark, prestigious American companies C.F. Martin and Gretsch as well as fantastic value for money in Fender, Yamaha and Epiphone. We stock guitars ranging from beginner to professional, with and without pickups and in all different shapes, sizes and finishes.
PPS: Made from Polyphenlene Sulfide a material commonly used in automobile and computer parts the PPS picks are lightweight but hard enough to ensure picking is strong and precise, so the pick provides accurate attack with a full-bodied tone as it strikes thestring. Silicon rubber based surfacing on each side, makes this pick ideal for fast picking styles. Available in Teardrop and Jazz shapes, and 0.8mm-1.0mm-1.2mm gauges.

One detail is the rating, honestly there is no right or wrong here really, it's down to personal preferences. A .022uF capacitor will roll off less treble frequencies than a .047uF, so you'd perhaps notice a more prominent drop in treble when rolling a tone pot down which has a .047uF cap wired to it than you would if it was a .022uF. This to me is an important detail to consider when choosing the right cap for you, but if you're still not sure, the general rule is .022uF for humbuckers and perhaps P90s, and a .047uF is used primarily for single coils. This isn't set in stone though, so perhaps consult your pickup manufacturers recommendations first. If you want any help in choosing the right rating for your harness though, I'm very much here to help, so by all means drop me a message!
It's impossible to ignore the British brand, which has been linked to the most famous names in rock history for several decades. Who hasn't seen "Marshall walls" stacked on the stage behind their favorite bands? Unlike Fender, their typical sound is not clean but rather "crunchy" and a bit sandy, like you can hear on some albums by The Who and AC/DC. Their first prototypes were Fender Bassman replicas that slowly found their own personality. For instance, Marshall decided to split the amp from the speaker cabinet (4 x 12" Celestion) to create the famous "stack". The use of tubes to provide more gain is also noteworthy, and it translates into more overdrive than the Bassman can offer. And so the JTM 45 was born, followed by many legendary models like the JCM 800 and 900, as well as the Plexis series.
SPRAYING TECHNIQUE Spray the body holding the can 6 to 8 inches away, moving either up and down or right and left depending on how you have set the nozzel. Start spraying from 2 inches outside the body and finish the stoke the same way. Don't stop or start the spry right on the body because you will end up with an uneven build up or paint drips. It is also good to spray a light "tack" coat first and let that dry for 45 min before laying on the thicker coats. This lets the paint adhere to the body better. You can also mount the guitar body to a square wooden stick that will fit inside the neck pocket so you can hold the guitar flat while you paint the top of it. This lets the coats build up thick and even, but watch for drips on the side. 

Curiously, Les Paul also contributed to recording... along with building his own recording studio at his home, he built his own disc cutting system, and did multitrack recording on acetate discs... recording on a disc, then overdubbing himself and that original disc playing onto another disc, and so on. He later worked with Ampex on multitrack tape machines, and released the first multitrack electric guitar recording on Capitol records in 1949... however, Sydney Bechet had released a multi-track recording using Paul's techniques back in 1941. 

Description: Guitar Type: Acoustic/Electric - Body: Mahogany - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Bubinga (African Rosewood) - Figured - Sides: Bubinga (African Rosewood) - Figured - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Ivory - Frets: 20 - Inlay: Mother Of Pearl - Dot - # of Strings: 6 - Bridge Construction: Rosewood - Cutaway: Single - Soundhole: Round (Traditional) - Rosette: Mother Of Pearl - Hardware: Diecast, Gold, Grover Tuners - String Instrument Finish: Natural
If you think not using any pedals makes you more “real” or “natural” of a player, you’ve got to be kidding me. Let’s think about what is physically happening when we play electric guitar. The sound is created when a guitar string is plucked by a pick, likely made from some polymer (oh wait, the “real” guys use their thumb, okay) causing it to vibrate. This vibration also creates a corresponding vibration through a magnetic field above your pickups. The pickup converts this into electric current, which passes through a simple low-pass filter tone circuit and a passive volume attenuator (we presume you’re not using an active pickup, being that you’re keeping it “real”) that does some equalization before it even gets to the cable. The standard cable consists of stranded, >99% oxygen free copper wire usually measuring between 18-24 gauge thickness, creating another filter in conjunction with the guitar circuitry based on cable capacitance.
EQ placement is similar. Some players prefer to mold and shape their guitar’s primary tonal character before it is processed by other effects, but others prefer to adjust the EQ of the finished sound (again, placement in front of delay and reverb is preferable). Or maybe your distortion pedal’s EQ controls just don’t have enough bass or treble and you need to tweak its tone a touch more. If you own an EQ pedal, have fun and try placing it in different locations to see what works best for you.
Shouldn't even be questioned. Ever hear of 'Voodoo Child'? Yeah, that was recorded in one take. & almost entirely improvised. & it's the greatest recording of an electric guitar being played EVER. & this isn't from some idiot who just listens to a lot of music, I play the guitar and have done a lot of reading and I know a few of your favorite guitarists would agree with me.
Guitar has a vicious tone, nice wood, great p[ickups. However the guitar I received has a problem with the volume control acting as a tone knob and also cuts out sometimes. The guitar chord had to be replaced because it was cheap and cut out like a bad phone chord. I have to take it in to a local guitar shop and have the volume control fixed. Not too expensive but some additional cost. I didn't want to send it back as I otherwise love the guitar and didn't want them to send me a different one rather than just repairing it. Plus I don't want to wait that long. But certainly a great guitar for the money. No question.
You wouldn’t guess that this is a low-end electric acoustic, even on close inspection, because the build quality is superb. This translates to some great tone. While it might not have quite the same ring and sustain as an expensive model, only real audiophiles are likely to notice. You get a solid spruce top, good quality hardware, and Fishman electronics.
Even though pickups are the main component tasked with interpreting string vibrations and indirectly turning them into sound, your choice of wood still matters. Although the effect is subtle, certain woods will give you better sustain, more definition, and so on.  And in the end it's the accumulation of all of these choices that determine your ultimate sound.
Guitar amplifiers and electronic keyboards may have switch pedals for turning built-in reverb and distortion effects on and off; the pedals contain only a switch, with the circuitry for the effect being housed in the amplifier chassis.[106] Some musicians who use rackmounted effects or laptops employ a MIDI controller pedalboard or armband remote controls to trigger sound samples, switch between different effects or control effect settings.[107][108][109] A pedal keyboard uses pedals, but it is not an effect unit; it is a foot-operated keyboard in which the pedals are typically used to play basslines.
On the extreme end of things, adding a lot of reverb to your tone can create large, expansive soundscapes where the notes are less distinct and everything forms one carpet of background sound. Reverb pedals often have a number of controls, from the most basic knobs controlling the volume of the effect (known as “mix”, or how much reverb is mixed into your guitar signal) and the length each note reverberates for (known as “decay”), to more versatile pedals that have controls for different kinds of reverb such as “small room”, “plate” and “arena”.
{ "thumbImageID": "SE-Custom-24-Electric-Guitar-Whale-Blue/J46382000003000", "defaultDisplayName": "PRS SE Custom 24 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Whale Blue", "sku": "sku:site51500000029836", "price": "779.00", "regularPrice": "779.00", "msrpPrice": "780.01", "priceVisibility": "1", "skuUrl": "/PRS/SE-Custom-24-Electric-Guitar-Whale-Blue-1500000029836.gc", "skuImageId": "SE-Custom-24-Electric-Guitar-Whale-Blue/J46382000003000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SE-Custom-24-Electric-Guitar-Whale-Blue/J46382000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tobacco Sunburst", "sku": "sku:site51500000029838", "price": "779.00", "regularPrice": "779.00", "msrpPrice": "779.02", "priceVisibility": "1", "skuUrl": "/PRS/SE-Custom-24-Electric-Guitar-Tobacco-Sunburst-1500000029838.gc", "skuImageId": "SE-Custom-24-Electric-Guitar-Tobacco-Sunburst/J46382000002000", "brandName": "PRS", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SE-Custom-24-Electric-Guitar-Tobacco-Sunburst/J46382000002000-00-60x60.jpg", "imgAlt": "" } ] }

Modulation effects (like phaser and flanger) follow effects like wah and overdrive. This allows the modulation effect to process and modify the tone built by the effects before it. If you put a modulation effect before the overdrive, then you are overdriving the sound of the flanger. This is a lot more difficult to control so the ME-80 places it after these effects.

Although acoustic guitars have recently surpassed electrics in popularity, the electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. If you want to play in a band, you’ll probably want an electric guitar. You’ll also want one if you want to develop the ability to play melodies and solos because electric guitars are, in general, better designed to accommodate fast fingering and more able to stand out in a musical group.
The vast majority of bass amps in the 2010s can be powered solely by AC mains power, obtained by plugging the amp into a wall socket. Inexpensive practice amps may have the AC mains plug hardwired into the unit. Middle-priced to high-priced amplifiers typically have a removable cable and plug, as used with PC computer towers. The benefits of having a removable cable and plug is that if the cable becomes worn or damaged, a new cable can easily be replaced by a layperson. If a hardwired AC mains cable and plug becomes worn or damaged, a qualified technician or electrician will typically be required to replace the cable and plug. Most amps are designed to work for a single voltage. A small number of expensive bass amps designed for touring professionals have user-selectable voltage, which enables a bassist to play with same amp in North America and Europe. A small number of small combo amps can run on both AC mains power and battery power. This enables bassists to play outside where there is no access to power (e.g., for busking on the street). Amps that are battery powered may have a 12 volt input, enabling the unit to be connected to a car battery with alligator clips.
Description: Black Finish Model. Body: Alder - Body Construction: Solid - Top Wood: Alder - Neck Attachment: Bolt - Neck Wood: Maple - Neck Construction: C-Shape - Nut Width: 42mm - Fingerboard: Maple - Frets: 21, Jumbo, Medium - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - Guitar Features: Pickguard - String Instrument Finish: Black - Made In: Mexico
Fender also supply a variety of signature models, each with specifications similar to those used by a well-known performer. Custom Artist guitars are the Custom Shop versions of the Artist Series line, which significantly differ from the standard production models in terms of quality and construction, making these instruments much more expensive. As well as the other Custom Shop instruments, the Custom Artist guitars are available either as Team Built or Master Built items, some being exact replications of the specific artist’s original instrument, better known as “Tribute” series (featuring various degrees of “relicing”, such as Closet Classic, New Old Stock, Relic and Super Relic treatments, depending the model). Artists with models available in the signature range include:
{ "thumbImageID": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "defaultDisplayName": "Ibanez AEWC400TKS Comfort Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black Sunburst", "sku": "sku:site51500000177716", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "749.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst-1500000177716.gc", "skuImageId": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000-00-60x60.jpg", "imgAlt": "" } ] }
It comes with two 6.5-inch speakers, delving out 100 W each for a total of 200. Now, the small woofer diameter might make these units work less-than-perfect for rendering stomach-churning bass noise, but ZT Amplifiers never intended for them to be used as such. Instead, they are supposed to deliver loud and clear enough sounds in the treble and mid ranges to make the guitarist hold its own even when a loud drummer is present.    
The Takamine brand helps prevent big brand manufacturers from setting their prices too high - by showing them that great guitars can be produced at reasonable prices. On top of their bang per buck reputation, Takamine is considered as the pioneer of installing built-in pickups into acoustics, something that is now a common configuration offered by majority of guitar builders. The Takamine P3NY showcases how impressive tonewoods and electronics can be implemented without ridiculously jacking up the price.
Third, the power ratings of guitar amps tend to be nebulous because the power is measured at a certain distortion threshold, yet most guitar amps are specifically designed to create distorted tones. Even with home audio gear, which isn’t designed to distort, it’s difficult to compare numbers across brands because each manufacturer comes up with their numbers in a different way. With guitar amps, it’s nearly impossible to make apples-to-apples comparisons of power ratings.
Three full steps down from Drop D. Utilized by Dead by April (on some songs), Metallica in the song "Invisible Kid" from St. Anger, Asking Alexandria (G#) on their self-titled album, Damien Deadson, Love and Death, Architects and The Acacia Strain. Staind also uses this tuning (but with the 2nd string tuned up 1/2 step to emulate a 7-string guitar), as well as several other modified variations of this, such as one in which the 5th string is also dropped from D# to C#.
The construction of an instrument is naturally a fundamental characteristic that pertains not only to playability, but the ultimate sound of the instrument as well. Durability will be affected by this as well. Guitar construction varies from brand to brand and model to model; instrument makers utilize a wide variety of materials to build the guitar body. Wood is the most common material associated with guitars, but plastic and metal are used as well. Construction should also be given extra consideration with electric guitars, as the electrical components serve as a secondary construction within the instrument.
This mod revolves around the concept that adding mass to the headstock lowers its resonant frequency, while reducing mass will raise that frequency. The theory at work here is that vibration is absorbed or reflected back into the strings and body based upon this frequency. Depending upon the harmonic makeup of your particular instrument, changing this can enhance or degrade sustain and accentuate or attenuate certain harmonics. All of this is dependent not only on your guitar’s construction, but also on how large your headstock is to begin with. If all of this seems a bit hazy, that’s because it is. I don’t have a handy-dandy answer like “more mass equals more sustain” because it isn’t always true. Suffice it to say that you can make a difference in a guitar’s character by following this path. I usually go through this exercise with my builds because I have the luxury of time and the resources at hand. It’s like fine tuning a race car’s suspension settings to your liking.
Categories: Guitar manufacturing companies of the United StatesGuitar amplifier manufacturersManufacturing companies based in ChicagoManufacturing companies established in 1890Companies disestablished in 19681890 establishments in Illinois1968 disestablishments in IllinoisDefunct companies based in IllinoisMusical instrument manufacturing companies of the United States
Tokai was founded in 1947 and is based in Hamamatsu, Japan. Tokai began production of acoustic guitars in 1965 and by 1968 was producing electric guitars for the American market. Tokai still exists as guitar manufacturer. Tokai made guitars for Fernandes, Mosrite and Fender Japan. Tokai badged guitars included the house brand Tokai as well as Cat's Eyes, Conrad, Drifter, Hondo, Love Rock, Mosrite, Sigma and Silver Star. Possible badges include Artist Ltd., Gaban, Gallan, Gession and Robin. It's suggested that Tokai made Hummingbird acoustics as well, but if these were related to those made by Humming Bird I haven't quite sorted out yet.
For quite some times now, many musicians have been making use of the distinctive sound and look of Koa wood construction on instruments. Designed to meet the taste of Hawaiian culture and tradition, the Koa wood on the ESP LTD EC-1000 is native to Hawaiian island, boasting a remarkable history and well-deserve popularity for its recognizable natural reddish and grain pattern eliciting a well-balanced sound while adding tone brightness without affecting the guitar’s warmth.
Taylors are okay as guitars go, but... I've owned three, sold them all in mint condition and lost considerable coin in doing so. I think they belong on this list because they charge hand made prices for MASS PRODUCED guitars. Don't believe me? Take the Taylor that you own and do a search for it on eBay. That's right, at this very moment there are hundreds of guitars just like yours for sale on eBay. And that's only checking this one sales venue! These guitars are worth half of what you paid because the market is saturated with them. Taylor cranks out hundreds of them per day and 100's of thousands per year. If you're shopping and seriously considering a Taylor, you can get comparable quality and far better value elsewhere. Choose carefully and you'll see your investment go up in value. Aside from some special, collectable models of Taylor, you will loose money on this brand.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(863) 688-4590, visibilitySalePrice=239.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114572014, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Fri Oct 12 04:15:17 PDT 2018, invMsgAvailability=, serialized=false, listPrice=239.99, isShipsInternational=false, name=dark red, storeCity=Lakeland, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Lakeland, newPrice=239.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=239.99, warranty=true, storeId=774, displayId=114572014, stickerDesc=, isOnSale=false} 239.99 USD

Finding a good pickup for an acoustic guitar is a real personal choice that will depend on your budget, style, aspirations, and the actual guitar you own – that’s why we’ve written a focused article on the best acoustic pickups. Among the myriad of acoustic pickups on offer, you’ll find the quickest to install are transducer pickups, which attach to the face of your guitar – an affordable solution, although the sound quality isn’t as advanced as others. A step up is both undersaddle and soundhole pickups, which have their own pros and cons, while – at the higher-end – you’ll find internal microphones and hybrid mic/pickup systems, which offer a beautifully rich, natural tone. A great example of one of these hybrid systems is the LR Baggs Anthem Tru-Mic.
The JX44 Air Control™ allows up to four guitars and six amps to be used at once, as well as a built-in Radial DI, an SGI interface for longer cable runs, and an X-Amp to make the reamping process incredibly efficient. No wonder it won the Music Players ‘Wish I Had One’ award! Pair it with a Headbone amp head switcher and the JDX 48 for the ultimate in control and consistent tone night after night.
With this new edition, they scrapped the DVD from the previous version, and introduced online video and audio clips, as a supplement to the book's teachings. They didn't take it overboard though, with just 85 videos and 95 audio tracks, but at least it's a step in the right direction. You can't learn music by just reading about it, you need audible tools.
Delay/echo: Delay/echo units produce an echo effect by adding a duplicate instrument-to-amplifier electrical signal to the original signal at a slight time-delay. The effect can either be a single echo called a "slap" or "slapback," or multiple echos. A well-known use of delay is the lead guitar in the U2 song "Where the Streets Have No Name", and also the opening riff of "Welcome To The Jungle" by Guns N'Roses.[86]
By the late 1970s, costs of manufacture in Japan had risen to such an extent that it was difficult to make student-grade guitars over there. It was far less expensive to manufacture instruments in Korea. Numerous factories were built, and existing facilities in Korea were expanded. Samick built a factory capable of producing one million instruments a year. Japanese companies invested heavily in Korea so that they would be able to produce their low-end models in Korea and high-end models under the same brand names in Japan. The early Korean-made instruments were not as good as the Japanese ones, but it did not take nearly as long for Korean quality to improve as it did for the Japanese to go from making crude low-end models to sophisticated instruments suitable for professional use. The Koreas had the benefit of all of the Japanese experience especially in the cases of factories with Japanese ownership or management.
{"eVar4":"shop: accessories","eVar5":"shop: accessories: fretted instrument accessories and parts","pageName":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces: bridges and tailpieces for guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[mf] shop: accessories: fretted instrument accessories and parts","prop1":"[mf] shop: accessories","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"bridges & tailpieces for guitars","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces: bridges and tailpieces for guitars","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces: bridges and tailpieces for guitars","prop3":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument parts: bridges and tailpieces","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category4"}
In low-end instruments laminated or plywood soundboards are often used. Although these materials often impart great strength and stability to the instrument, via layers of perpendicular grains, they do not vibrate the same way that natural wood does, generally producing an inferior tone with less amplification. Instruments with laminated or plywood soundboards should be avoided if possible.
{"id": "114368474", "categoryId":"site5AAN", "name":"Used Artist Series Electric Guitar", "pageUrl":"/Used/Samick/Artist-Series-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Artist-Series-Electric-Guitar/000000114368474-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"249.99", "priceMin":"249.99", "priceMax":"249.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"Samick", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LAAA,site5HBA,site5LFMIC", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"209570445523", "priceVisibility": "", "itemType": "Used"}
Midlands trio The Bad Flowers make a concise, bruising power-blues that will appeal to fans of the likes of Jared James Nichols and Blues Pills, both of whom have offered TBF support slots. September single Thunder Child is the first shot fired from their forthcoming debut Starting Gun and packs an uproarious solo that leaves TG reaching for our wah pedal. Think Rory Gallagher through AC/DC’s amp stack and you’re near Tom’s bar-fight-scrapping lead sound.

Some effects produced dramatically weird sounds that were largely impossible to pull off. The peculiar 1948 DeArmond Trem-Trol (used extensively by rock-and-roll pioneer Bo Diddley) altered the volume of the guitar signal by exposing the connecting pin to a brass-and-glass canister half-filled with shaking, water-based electrolytic “Hydro-fluid.” The shaking—and often leaky—fluid washed over the pin and would bend the signal’s volume, causing an oscillating, watery tone. In the words of Chris Gray, one of its few remaining owners, “This is not a subtle effect—it adds all its personality to your sound whether you’re ready for it or not.”

After shaping your sound, is important to add some depth to it, and here’s where the ‘ambiance’ pedals find their way into your rig. The chorus effect should be used properly, without overdoing it, but can give great results: the depth and the ‘3 guitarists playing your part’ effect can work amazingly well for your music. Delay and Reverb can be used lightly, in order to enhance your sound and fill up your guitar solos with a little space (by setting up a nice spring or hall reverb settings and a dotted delay) or heavily, to achieve creative sounds where the sky is the only limit.
Really loving this bit of kit. The thing that surprised me most wasn't the fourth position (which is great!) but the overall sound improvement I get from quality hardware. I have 2017 American Professional Tele and I'm amazed at the clarity that this upgrade has given me. TBH - I don't understand why Fender don't fit quality parts like this straight from the factory. Thanks guys!" - Max
I have a Decca that my uncle gave to my dad and he gave to me (I think, he's never really asked for it back since he doesn't play). It's in rough condition, has stripped and rusted screws with a lot of connection issues. But I love the shape, I love the pickguard, I love the all out retro look of it. Any idea on if I should spruce it up with some new screws and seeing what I can do to fix the wiring? And if so, how do I get the cash for such project?
Along with the Dobro name, OMI was acquired by the Gibson Guitar Corporation in 1993. They renamed the company Original Acoustic Instruments and moved production to Nashville. Gibson now uses the name Dobro only for models with the inverted-cone design used originally by the Dobro Manufacturing Company. Gibson also manufactures biscuit-style single-resonator guitars, but it sells them under names such as Hound Dog andEpiphone. The Dobro was first introduced to country music by Roy Acuff.
Wet Set: If you have a sound that you want to push a long way back in the mix, it can often be better to make your reverb effect pre-fader, and temporarily remove all the dry sound. Then alter the sound's EQ and reverb settings while listening only to the wet reverb sound. Once you've got that sounding good, gradually fade the dry sound back in until you're happy with the wet/dry balance. This approach can often be more effective than simply whacking up the reverb level while you listen to the whole song. Martin Walker
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use a worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.[18]