There is one drawback though, rather than signal that they might want a little more gain, too many players simply grab their volume knobs without warning. (the “sandbagging” I referred to previously), or kick in an overdrive pedal they “forgot” to check during SC. What sounds good for them onstage can send the audience running with bloody ears, Techs running for the backup cab cables, and lawyers sharpening their fangs. A little gain in their monitor, becomes multiplied by the power of the FOH. Sometimes it is a thought to let them blow out an amp speaker, rather than a bank of FOH speakers!
The Fender Stratocaster is the iconic counterpart to the Gibson Les Paul. The smoothly contoured body is very comfortable to hold and play, and it’s one of the lighter popular guitar models. Usually produced from alder wood, they have a particularly rich, warm tone. Unlike most Gibson models, Fender Stratocasters make use of a floating tremolo system, which allows the player to produce a vibrato effect with a “whammy bar”.

The Seagull S6 is another very popular choice for those looking for an affordable but great sounding acoustic. Owners claim it sounds as good as guitars in the $800-$1500 range. The S6 has a cedar top with cherry back and sides. It features a wider nut, which means this guitar will be a great choice for those playing finger style or that have larger hands. Owners of this guitar are singing it’s praises, saying that they have no regrets. The sound of this guitar is big, yet soft. Described as being “alive” with tone. Seagull has been making quality guitars at an affordable price for many years, so the S6 will not disappoint. See more on this guitar here.

Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.
PICKUP CAVITIES Same basic thing here. Be careful routing as you don't want to go outside you lines. The pickup rings tend to be thin along the outter edge, so if you go outside you lines it will look like there is a hole in the body of the guitar once you fit the rings on. Determine the depth that you will need for the pickups you are using. This is usually based on the length of the mounting screws. You will need enough room for them to fit. I use a 1/4" bit for this as well. You can use a template if you want but I do it free hand because any imperfections will be covered by the pickup rings.
Honeyman-Scott’s solos were concise and economical, getting the point across in only a few measures. His solo on “Kid” is a pop song unto itself that evokes the Beatles’ finest melodic moments, while his three- and four-second bursts on “Tattooed Love Boys” unleash more emotion, fire and style than most guitarists can convey in an extended 15-minute solo.
Featuring a small scale neck, the Squier by Fender Mini Strat Electric Guitar comes with three single-coil electronic pickups, with solid and intuitive master volume and tone control. The neck of the guitar is made of C-shape maple wood design, whiles the rosewood fretboard holding the strings and containing dot markings is designed in a manner that makes it easy to strum.
The Boss ME-80 has two modes of operations. MEMORY mode lets you scroll through banks and presets more like a conventional multi-fx unit, and MANUAL mode is what we described earlier, where you can use this pedal as if you had a bunch of effects on a pedalboard and just start tweaking away. MANUAL mode is really where this unit shines, and makes it stand out from other multi-effect pedals. The presets are okay for getting a taste of it, but as is typical of presets many are over the top.
Marshall's current best rated amplifier is the humble 1-Watt DSL1HR, an all-tube, dual channel amplifier head that gives you genuine Marshall tone and appeal in a more compact and practice friendly format. It is based on the JCM2000 Dual Super Lead (DSL) series that the company released in the late '90s, but with some modern enhancements to make it more user friendly. What's cool about this amp is that it can go lower than 1W via its built-in attenuator, which lets you switch to low power mode that has a 0.1W power rating. This means that you can crank the amp's dual ECC83 preamp tubes and ECC82 power tube at very low volume levels, great for quiet practice and for recording. Speaking of recording, Marshall equipped the DSL1HR with a speaker emulated Line out, using Softube's cabinet simulator technology. Other features include having two channels: classic gain and ultra gain, built-in reverb and pedalboard friendly effects loop in and out. More importantly, this tube amp is affordably priced and comes bundled with a footswitch.
Epiphone's offering in the low and mid-range segment has been pretty strong for years. The Epiphone Hummingbird Pro is their take on a legendary Gibson model and it brings much of the same qualities. What really makes this acoustic-electric stand out is the overall level of quality you get for your money. You can trust it as an accurate emulation since Gibson now owns and produces Epiphone's guitars.

Place one mic on each speaker at the same distance and orientation, and check the pair for phase cancellation by panning them to the same spot and listening in mono. The minute differences between the speakers, mics, and mic positions, combined with double-tracking, creates a monstrous presence when the tracks are hard-panned in the mix, and opens up a world of possibilities for separate EQ and effects processing. If you don't need the guitar to dominate the mix, you also can sum these mono-compatible tracks together to a single pan position for a noticeably bigger sound.

{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars: supro","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,","prop7":"[gc] used"}
Beginner amps aren’t going to be packed with features, but they should include good clean and distortion sounds, plus a decent EQ layout to shape your tone. Part of your journey as a newbie guitarist will include discovering what tones you like and don’t like, and that’s hard to do with a cheap amp that only produces one generic sound. If your first amp has some reverb or onboard effects, that’s a bonus.
The Les Paul Express has everything a beginning player needs and nothing more. Its controls are simple, but it can still get a reasonable range of sounds. Unlike some very low-priced guitars, its action height and intonation are individually adjustable for each string. Its humbucking pickups have a mellower sound than the single-coil pickups on the Squier by Fender Mini Strat, and mellower even than the other humbucker-equipped kid’s guitars we tested, but they also don’t have the hum that the Mini Strat’s pickups do.
Just like Fender, Epiphone – the Gibson subsidiary – know a thing or two about budget acoustics, and this DR-100 (reviewed in full here) more than proves that! With a range of finishes, the DR-100 features a classic dreadnought body shape, with back and sides made from laminated mahogany, with a select spruce top, and black pickguard sporting Epiphone’s iconic E logo.
Designed in collaboration with the legendary Guns N' Roses guitarist, this limited-edition Slash Firebird won't last long. After all, as Slash himself says, "Who doesn't want a Firebird?" Limited to a production run of just 900, worldwide, this version of the iconic guitar combines tradition, like the reissue Kluson banjo-style tuners, with some of Slash's signature touches like the Seymour Duncan Slash signature Alnico II pickups and flame maple top. Great for rock and blues, don't miss your chance to snap one of these up. Case sold separately.
{"eVar4":"shop: accessories","eVar5":"shop: accessories: fretted instrument accessories and parts","pageName":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: fretted instrument accessories and parts","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"electric guitar pickups","prop5":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","prop6":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","prop3":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups","prop4":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category4"}
For players that want to start off purely in the world of metal playing, this Schecter bundle should be right up their alley. The guitar itself has a lovely midnight satin black finish, with ready access to its 24 frets thanks to a generous cutaway. The dual humbucker pickups will put out plenty of power as well, allowing for more extreme styles of music to be played with ease. This particular set skips the accessories in favor of a mere amp, gig bag, and instrument cable, but the quality of the main instrument makes up for the omission of picks and the like.
It’s curious to note that also tauted in the ’39 Grossman catalog was the National Res-O-Lectric Pick-up Unit, designed to be added to National and Dobro amplifying guitars. This was not sold as an accessory, but had to be factory-installed for $25. On single-cone guitars, the bridge assembly/cover was replaced with the pickup assembly, faced in gloss black Ebonoid. On tricone guitars the pickup would be built in to the silver cover. It’s not clear if these were also mid-’37 developments or if they appeared closer to the ’39 Grossman catalog publication date.
Having tried out this technique, I have to say that it's something of a revelation to hear the enormous range of radically different sounds it makes available. When you start inverting the phase of a mic, it sounds like the most extreme EQ you've ever heard, which means that you can substantially reinvent guitar sounds at mixdown without using any heavy processing. For even more sonic mileage, you can also take a leaf out of John Leckie's book and process each of the three mic signals independently.
alright dude, i think this an awesome list. i hate looking things like this and seeing people put crap like slash at number 1 or something. this shows u obviously have great taste in music, but theres just a few things that struck me as odd. 1, no chuck berry. 2, really? john mayer? i admit he has technical skill, but saying hes one of the 10 best guitarists thats ever lived? thats just false. i mean what happened to jeff beck, santana, , eric clapton, harvey mandel, kurt cobain, and even trey anastasio(if that is how its spelled lol). they are all much much better then mayer could hope to be, both musically and technically,.
Make sure it feels comfortable, especially the fretboard and body. Make sure there are no buzzing notes and that the frets are flat and even. Avoid electric guitars with whammy bars as they may be too difficult to tune for beginner guitar players and make the guitar more expensive (maybe one on the next electric guitar you buy). The tuning heads should be easy to tune and stay in place, and try playing the guitar through an amplifier to check for a good sound quality (hopefully no humming or buzzing).
Myths and Legends: Valve technology is intrinsically the most elegant means by which a speaker is able to reproduce music. This is not because valves have magical qualities but because the technology by which they function is not achievable by other means. In ten thousand years from now Valve amplifiers will possible be the only remaining technology from the 20th century that will be still be being used and loved with as much passion as when first invented. As much as there is no proof that Valve amplifiers can sound superior to solid state I for one if given the choice will only listen to music through Valve amplification.
Distortion and overdrive are forms of audio signal processing used to alter the sound of amplified electric musical instruments, usually by increasing their gain, producing a "fuzzy", "growling", or "gritty" tone. Distortion is most commonly used with the electric guitar, but may also be used with other electric instruments such as bass guitar, electric piano, and Hammond organ. Guitarists playing electric blues originally obtained an overdriven sound by turning up their vacuum tube-powered guitar amplifiers to high volumes, which caused the signal to distort. While overdriven tube amps are still used to obtain overdrive in the 2010s, especially in genres like blues and rockabilly, a number of other ways to produce distortion have been developed since the 1960s, such as distortion effect pedals. The growling tone of distorted electric guitar is a key part of many genres, including blues and many rock music genres, notably hard rock, punk rock, hardcore punk, acid rock, and heavy metal music.
Having a tuner on your pedal board is useful but these days I more often use a clip-on tuner, specifically the TC Electronic Polytune Clip (Buy at Amazon UK, Amazon US). I don't like the main signal to run through the tuner all the time if I can help it (I use the GigRig G2 switching system) but if you don't have that luxury, then look for a tuner with True Bypass like the TC Electronic Polytune 2 (Buy at Amazon UK, Amazon US) or use a Volume pedal that has a Tuner Output (many do these days!).

The ADA MP-1 was a legend for it’s superior versatility at the time of it’s release. Since first becoming available during the 80’s, players vied after it for it’s midi switching capability via footswitch. Paul Gilbert is most famous for his loyalty to the amp during the spawn of his career.  It runs on two 12AX7 preamp tubes and has three main voicings — Solid State, Clean and Distortion. One downfall of this amp stems from it’s lack of an input volume control, but thanks to a host of mods available nowadays for this thing, one can look really look past this minor flaw. On top of that, you can find them used for around $250! A steal for 80’s tone-in-a-box.
No matter how good a tech may be, his preferences are going to be different than yours on string height, etc. And he is never going to use the exact same amount of pressure fretting a note as you do (affects intonation adjustments). So, the best you can hope for is finding a good tech with good comunication skills, willing to listen to what you want. I'll admit I've never tried to find one, but that sounds more difficult than learning to do the setups yourself, which is what I did.
Telecaster is considered to be the oldest solid body electric guitar in the world. Capturing that type of pedigree is not easy, but Squier managed to pull it off. Handling the Squier by Fender Vintage Modified Telecaster brought back some of the best memories of my youth, when Telecaster was the go to axe. This is definitely one guitar worth trying out.
12-string acoustic guitars have six string courses, each with two strings that are tuned to produce a chiming, chorus effect. Usually, the string pairs in the bass courses are tuned an octave apart while all treble strings are tuned in unison. Some guitarists prefer tuning the second string in the third course (G) in unison while others opt to tune it an octave higher for bell-like ringing tones.

I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.
Back in the 1930s jazz and big-band guitarists began to make the switch to electric guitars in order to compete with the volume of other instruments onstage. Early electric instruments were hollow-body guitars. They were big, and featured an arched top that helped with power and projection. They had f-holes to facilitate amplification acoustically, and the first rudimentary pickups that allowed the guitar to be plugged into an external amplification system.
These guitars also appeal to adults who played in their youth and would like to pick up the instrument again. Fortunately, they’ll find that high-efficiency, low-cost overseas manufacturing has created a new generation of inexpensive guitars that play and sound very much like more expensive models—something that wasn’t true 20 years ago, when few cheap guitars were worth playing. We also discovered in our Best Electric Guitar Amp for Beginners article that there are several very nice amps available for less than $100, so an adult can get back into the game for well under $300.
While tremolo is a change in volume, vibrato is a constant and repetitive change in pitch up and down. It can be used to make chord progressions shimmer and to add a wobbliness to single note lines. It is like adding vibrato with your finger, but it is constant and consistent. Controls are usually the same as tremolo pedals, with tap tempo also being common.
Believe it or not, Eddie Van Halen hadn’t even heard rock music until he and his family moved from the Netherlands to Pasadena California in 1967. After hearing Cream, he quickly abandoned piano and drums for the guitar, learning the instrument by picking licks off records by Eric Clapton, Led Zeppelin, Jimi Hendrix and Jeff Beck. These influences were merely a springboard, though. Eddie was quickly able to put his own mark on everything he played.
Living Colour’s Vernon Reid agrees but also speaks to a larger shift. He remembers being inspired when he heard Santana on the radio. “There was a culture of guitar playing, and music was central,” adds Reid, 58. “A record would come out and you would hear about that record, and you would make the journey. There was a certain investment in time and resources.”
The solution is pretty simple actually. When setting your intonation it should look like two sets of steps. You should never need to move the saddles all the way forward or turn them around. If you want to adjust something do it in a way that allows you to keep this configuration. You do that and you'll never have to worry about tuning issues period, let alone a g-string.

The advantage of this specific package is that you’ve got everything you need to get started right away: guitar (duh), amp, strings, tuner, guitar cable, picks, gig bag, strap, and instructional DVD. Those of you who just wanna get a guitar and start, this is your choice. Squier also makes similar package, but I recommend this over the Squier because the parts (electronics) are higher quality, although the Yamaha costs a little bit extra.
The obvious first step is too loosen the truss rod, however, after inspection I learn the truss rod is already completely loose. In order to straighten the neck we opt for a heavier gauge string which places more tension on the neck, pulling it straight. The heavier gauge is necessary to render the neck flat, without it string buzz is overwhelming.
Quirks? Some. The old Rola was kind of tired, so I saved it and put in a new Jensen Mod I had laying around (not a bad little speaker, but not a vintage Jensen, either…expect a future upgrade). The 7F7’s are supposed to be very loud and micro-phonic (which was why we don’t tend to see them in guitar amps after the mid-late 40’s), but this one sounds just fine. And they’re cheap, so it’s not like you’re hunting down good EL86’s or anything. Also, one thing that took some getting used to was the tone knob is backwards by contemporary standards. That is, turn the creamy chickenhead to the left, you get more treble (and more drive and volume). Turn to the right, and it gets very bassy and like a chewy jazzy tone.
The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.

This is a 'basic' guide that allows you to methodically set up a guitar that has no major problems to begin with. This will not tell you how to do a neck reset on an acoustic, or shim an electric bolt-on neck for instance.The guide is cheap, effective and very informative, considering the pittance of a price being paid for it. This author obviously loves guitars and has a commendable desire to not only be able to make all the BASIC adjustments for themselves, but also to briefly and effectively explain WHY the adjustments work.

Some guitarists find spectral overtone melodies inside sheets of feedback (see: Lou Reed’s Metal Machine Music, Sonic Youth), but British wunderkind James Blackshaw uncovers them in careful stacks of 12-string acoustic guitars and bright orchestrations. Minimal in his attack and classical in his drama, Blackshaw bears the acoustic guitar torch in the 21st century, his pieces unfolding in slow, formal shifts until they beam like a burning light through stained glass.
The PAL Promise is about giving you an unparalleled shopping experience. We want you to be 100% satisfied with every purchase you make from us. We're committed to not only meeting, but exceeding your expectations. We strive to create a lifelong relationship with you and your music, by delivering the best gear in the business at unbeatable prices, top notch tech support, outstanding customer service and a secure safe checkout process. Click Here To Learn More...

Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.

For instance, the guitars that have a solid body are the most numerous out there. These models are as sturdy as they come, but they do not offer one plenty of resonance and sustainability. If you are interested in a design that mimics the figure of acoustic units, then you should pay attention to those guitars that have a hollow body. These products are able to deliver plenty of resonance, but they might not be of great help when it comes to feedback.

1960's Teisco Del Rey, Model ET-44? Electric Guitar. 4 single coil Pickups. Great, original Black / Green burst finish. '57 Chevy style aluminum pick guard. "Shark-Fin" headstock. Rosewood fingerboard. Original 4+2 tuners with cast cover. 4-bolt neck joint with an adjustable truss rod. Bridge adjustable for height, intonation and string spacing. 4-Square pole pickups, 4 pots, 4 pickup selectors and a 3 position rotary wafer switch. Some of the pots do things and some don't either by modification or design. The rotary switch simply acts as an On / Off switch. Guitar works great the way it is, or could be configured other ways as well. We have not modified it since we acquired it 8 years ago. It's spent most of it's time in the box, until I decided to get around to listing it. Missing whammy bar as are most every Teisco we have ever owned. The bridge pickup has had one of it's mounting screws changed. The finish is in exceptional shape for a 40 year old guitar (while the photos make the guitar look black the finish is actually a dark green to black burst). Plays and sounds great. Not many finish chips. Very shiny. Frets in near new shape with virtually no wear. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, oiling the fingerboard, nut checked for correct height, neck angle checked, pickup heights checked and adjusted, adjusting the neck and action for great playability (clearance at the 9th fret = .008 when fretted at the first and the body (super low)) adjusting / checking the intonation (adjusted perfectly!) and cleaning and polishing entire instrument. This is our old shops standard $75 tune-up. Plays and sounds great. We also installed a new set of .009 strings. No case included.

Here you will find a list of beginner guitar chords. These chords are very commonly used through many popular songs and so learning them is a great foundation for your guitar future. With the chords below you will be able to play thousands of songs, including most of your favourites. And once you have learnt these chords and the changes between them you will find it very easy to learn new chords and add them to your repertoire.
These guitars are to hard for most people to understand, but there is so much quality to these guitars, more than most brands. Its like a science project making them most of the stuff on Manson Guitars hasn't even been heard of being used, or even invented by any other brands. Ill tell you what I wouldn't save my money up for a expensive strat that no ones really going to be impressed with or appreciate save your change for one of these bad boys, people will pass out of enjoyment though.

“Photocell Tremolo is found in mid-1960s American amplifiers. Those classic circuits used a light-dependent resistor to attenuate the input signal, coupled with a miniature neon bulb that is connected to the LFO. As the LFO oscillates, the bulb gets brighter and dimmer which in turn varies the resistance of the LDR. The varying resistance works with other circuit impedances to change the signal level, which produces a characteristically ‘hard’ sounding tremolo that moves between two levels, reminiscent of a square wave.” Got that? Well it is tricky and they do sound somewhat different but essentially they produce the same effect. The pedal I am using here, the Fulltone Supa-Trem uses a photocell to produce the sounds found in the classic Fender amps and most common tremolo circuit.
If you’re using a bunch of high gain pedals, or a lot of pedals chained together, chances are you’ll get a little bit of hum or unwanted buzzing coming from your amp. This is especially noticeable if you’re using high gain amps and guitars. If your amp is buzzing when you’re not playing anything, you might benefit from a noise gate pedal as they cut out all that unwanted noise but preserve your tone.
This one SOLD pictured has been SOLD OUT: This is one of my favorite vintage Alvarez guitars and is always truly a very good surprise just how great these sound / impressive and I have collected more than several over the years of this very model vintage era lawsuit guitar in AMAZING Condition. Here we have a wonderful and very clean example of a Vintage Japanese Acoustic its a late 1970's great Alvarez 5056 with the most intricately detailed inlay work everywhere on the body.... the front & back in Abalone & the fingerboard is rich - dark and wavy grained it looks to be Brazilian Jacaranda Rosewood and has the Gorgeous Tree of Life in mother of pearl & abalone inlayed into the rich rosewood fingerboard WoW!,even the bridge has Mother of pearl inlaid, (you should have a real good look to come to your own conclusions if its something you like ) and the frets are in very good original condition... action is very good nice & low adjustable either way with no buzzing anywhere on the fretboard real nice playing example here folks.. The finish has a natural golden patina as seen to it and this guitar is strikingly beautiful. No cracks, no repairs, very good - excellent vintage used condition and is JVG rated at 9/10 WoW!... She's very EZ on the eyes to say the least and a premium performer this vintage piece has had over 33+ years to age and mellow and was a one owner California guitar in above better than average condition... no splits or cracks or separations or repairs ever... I believe this to be the cleanest best playing vintage 5056's we have ever had in JVG or seen for that matter. This one is a real pleasure to play! HERE IS A LINK TO CUT & PASTE TO SEE MANY MORE PICS OF THIS INSTRUMENT: .
Although Orbison’s good friend and Sun Records labelmate Johnny Cash may be known as “the Man in Black,” Orbison habitually dressed from head to toe in black in the early Sixties, a decade before Cash adopted his dark uniform. Even Orbison’s raven hair and impenetrable jet Ray-Bans were blacker than the cover to Spinal Tap’s Smell the Glove, adding to his alluring persona as a mysterious, brooding artiste.
As PA systems improved, horn-loaded "bass bins" and subwoofers were added and were often well-equipped to amplify directly-fed bass guitar and keyboard frequencies. As well, in the 1980s and 1990s, monitor systems were substantially improved, which allowed sound engineers to provide on-stage musicians with a loud, clear, and full-range reproduction of their instruments' sound.

A noise gate is a very handy device that gets rid of hums and hisses that may become apparent when you're plugged in but not playing your instrument. Basically a limiter in reverse, the noise gate simply cuts out sounds below a preset level. As long as you're making music your sound is full on; but as soon as you stop playing, all the noise generated by your effects chain, vintage amp, and/or house wiring is silenced.
Glen Campbell; DJ Ashba, Melissa Etheridge, Nikki Sixx, Mick Thomson; Kaki King, Steve Lukather; Marcel Dadi, Ray Davies,[30] Roy Harper,[31] James Hetfield, Josh Homme, Cyndi Lauper, John Lennon, Country Joe McDonald,John McLaughlin, Yngwie Malmsteen, Bob Marley, Ziggy Marley, Stephen Marley, Roman Miroshnichenko, Maury Muehleisen, Dave Mustaine, Vince Neil, Jimmy Page, Richard Daniel Roman, Shania Twain, Boz Scaggs, Luis Alberto Spinetta, Statler Brothers, Cat Stevens, and Aaron Tippin;[30]

In the late 1950s, various guitars in the Kay line were assigned new model numbers; according to the 1959 catalog, the Thin Twin became K5910 and the Electronic Bass became K5965.[18] Both instruments remained in Kay's catalog offerings with only minor cosmetic variations until 1966, when Kay revamped its entire guitar line to only feature budget instruments. Kay also manufactured versions of the Thin Twin guitar under the Silvertone (Sears) and Old Kraftsman (Spiegel) brands.

I've spent a few weeks on this kit - I will update with progress. Cutting out the headstock and finishing the guitar was fun and not too difficult. I chose to use TruOil and a natural finish, which takes a few weeks to finish. The body I got was made from 4 pieces of joined wood, and I wasn't careful about checking for glue spots, so there are a couple in the finish, but it still looks great. The neck fits nicely and feels good. It is straight and correctly set up for string tension (a little bit of bow before the strings are on).
Mastering guitars isn’t a piece of cake, mainly if you are a greenhorn. You get lost in the labyrinth of types of guitars, each having different size, shapes, and price values. Most of these especially hunt your wallet, burdening down your pockets with hefty price tags. As an amateur, you find no other option but to pay the said amount hoping to get something useful. Indeed, the best electric guitar brands are usually inclined towards the more pricey side. If you have background knowledge about the best brands, who knows you may get your desired guitar in an affordable range. Through this article, you will learn what different types of guitar brands are available in the market.
I purchased this about 8 months ago (it is my first acoustic guitar) so I could learn to play again, I'm a singer by trait, but wanted to pick up a guitar again after a very long break. I did not want to spend a lot of money, but I didn't want junk either, while at the same time I wanted something that would translate well into performing live too. I did my research, and personally, it came down to this or the Yamaha APX-500 (But I really want the Mrk 1 not 2), so I settled for this.
A compressor “compresses” the signal that your guitar produces by normalizing the dynamic range of the audio input signal based on a threshold value. This effect is used virtually everywhere in recording. Everything you hear in music that is produced today is compressed in some way–and it can sound anything from a subtle barely noticeable effect to a thick, dampened squish.
: Palmer is a U.S.A. company based in Miami, FL. They contract out the building of cheap guitars to China and such; while reserving the high end, high priced guitars for those made in the states (like most guitar makers today). I had one that had a broken head stock. I paid $50 for it, just as a camp guitar. It sounded fair, but I could tell it was made cheap. I'd compare them to a cheap Cort, Mitchell, or Fender.
Using that pickup and gain level, you should be able to hear some guitar distortion. Of course, if that's not entirely satisfactory, there are a few other things you can do. If your amp has tone controls, you can turn up the mid knob to hear the guitar distortion more clearly. If there's only bass and treble controls available to you, you can turn both of these down a little to hear more distortion.
However, you don͛t need to fork out over $10k for this version, as it comes with a respectable sub-$1,000 price tag. Sporting a familiar Strat style basswood body, this model is available in three iconic EVH-approved colors. Playability – as you͛d expect – is top-notch, with a reinforced quatersawn maple neck and a compound radius rosewood fretboard.
The AS is a semi-acoustic guitar built to tackle just about any genre of music you throw at it. The pickups are mounted into a sustain block for increased sustain and feedback elimination. The 17th fret joint features comfortable access to higher notes. Super 58 Custom Pickups The Super 58 Custom pickups deliver the smooth, nuanced tones and the biting growl of blues. Ebony Fret board w/ Art star Fret Edge Treatment The Ebony fret board with Art star fret edge treatment provides tight response and smooth left-hand fingering. Bone Nut The Bone nut provides richer tone from low to high. Specifications: neck type: Art star 3pc Mahogany/Maple set-in neck body: Flamed Maple top/back/sides fret board: Bound Ebony fret board w/Pearl & Abalone block inlay frets: Medium frets w/Art star fret edge treatment bridge: ART-1 bridge tailpiece: Quick Change III tailpiece neck pu: Super 58 custom (H) neck pu bridge pu: Super 58 custom (H) bridge pu Neck Dimensions: Scale: 628mm/24.7" a: Width at Nut - 43mm b: Width at Last Fret - 57mm c: Thickness at 1st - 20mm d: Thickness at 12th - 22mm Radius 305mmR Body Dimensions: a: Length - 19 1/4" b: Width - 15 3/4" c: Depth - 2 5/8".
{ "thumbImageID": "Pro-Mod-So-Cal-Style-1-HH-with-Floyd-Rose-Left-Handed-Electric-Guitar-Black/J48559000001000", "defaultDisplayName": "Charvel Pro-Mod So-Cal Style 1 HH with Floyd Rose Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000035005", "price": "929.99", "regularPrice": "929.99", "msrpPrice": "1,282.74", "priceVisibility": "1", "skuUrl": "/Charvel/Pro-Mod-So-Cal-Style-1-HH-with-Floyd-Rose-Left-Handed-Electric-Guitar-Black-1500000035005.gc", "skuImageId": "Pro-Mod-So-Cal-Style-1-HH-with-Floyd-Rose-Left-Handed-Electric-Guitar-Black/J48559000001000", "brandName": "Charvel", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
I’m going to be doing a pickup upgrade in the next few months on a Strat-style HSS. I have an idea, maybe a crazy idea, about how I’d like to wire it but so far I have been unable to find any indication that it is even possible. This site seems like the best place to get an answer. The single coils in my guitar will be replaced with another set of single coils (Seymour Duncan SLS-1 lipsticks). The humbucker I plan on installing (DiMarzio Tone Zone) is capable of being coil-split, which I want to take advantage of BUT I would rather not install a push/pull pot. My wiring idea… Toggle Position: 1) Full Humbucker, 2) North coil only of humbucker for single coil performance, 3) middle coil only, 4) middle and neck, and 5) neck only. Is this even possible using the 5-position toggle switch I already have, or is there no way to do it besides using a push/pull pot or installing an additional mini-toggle?
A Power attenuator enables a player to obtain power-tube distortion independently of listening volume. A power attenuator is a dummy load placed between the guitar amplifier's power tubes and the guitar speaker, or a power-supply based circuit to reduce the plate voltage on the power tubes. Examples of power attenuators are the Marshall PowerBrake and THD HotPlate.

Had gibsons, fenders, etc. Was really impressed with my washburn idol. Only downside is that there aren't many dealers, so you've really got to make an effort to get one in your hands. Dollar for dollar, one of the best brands out there. Quality can be spotty if you look on ebay, so I'd recommend craigslist... Buy em used, since they don't hold value like the big brands.
Flanger – Before digital recording was the standard, a common trick used by artists was to touch one of a tape recorder’s reels to slow it down, then let it go so it would catch up with the main track. The result was a sound that could be subtly thicker or downright unrecognizable, and it’s the effect that flangers are designed to reproduce. You can hear Jimmy Page’s use of a flanger on Nobody’s Fault But Mine and Kashmir, by Led Zeppelin.
In January 2017, Vox introduced the MV50 amp head and amp sets. Described by Vox as a hybrid amp, the amp heads are called the MV50 AC, the MV50 Clean, and the MV50 Rock. When paired with the BC108 cabinet, each is then described as the MV50 AC set, the MV50 Clean set, and the MV50 Rock set respectively. Vox states the MV50 AC is designed to provide the sound of a VOX AC30, and that the MV50 Clean is designed to provide clean tones with a lot of headroom as inspired by the sound of American amplifiers. Vox states the MV50 Rock is designed to provide the more aggressive high gain sound of vintage British amps. In January 2018, Vox announced two new MV50 amp heads: the MV50 Boutique and the MV50 High Gain.

Either today or tomorrow my SSS Mexican Stratocaster will be arriving at my local Guitar Center and I'm not sure if I should pay to get it setup. The guy that worked there, Jon, suggested I get my guitar setup as soon as I go and pick it up since its 50% off for a first time setup. He said the technician would adjust the guitar strings, double check the action or height of the strings or something. It sounds like something I wouldn't really need but then again I'm just a beginner - maybe some of you more experienced guitarists can let me know if Jon was trying to do me a solid or if he was just trying to make a sale. He also said they'd help me get my guitar in tune which was pretty cool.
As a result of the improvements to PA systems and monitor systems, bass players in the 2000s no longer need to have huge, powerful bass amplifier systems to play stadiums and arenas. Instead of playing with two 8x10" bass stacks and one or more huge, powerful bass heads, in the 2010s, many bass players perform at large live venues with relatively small and less powerful bass amplifiers. The reason they can do so is that most higher-priced 2010s-era bass amplifiers usually have DI output jacks that can be patched into the audio snake cable, and then plugged into the mainstage mixing board and amplified through the PA system or sound reinforcement system.

There’s also the line of self-tuning “robot” guitars that Gibson spent more than a decade and millions of dollars developing. In 2015, Juszkiewicz made the feature standard on most new guitars. Sales dropped so dramatically, as players and collectors questioned the added cost and value, that Gibson told dealers to slash prices. The company then abandoned making self-tuners a standard feature. You can still buy them — they call them “G Force” — but they’re now simply an add-on option.
Acoustic guitars were always subjected to various limitations. Since the body of the guitar is its own source of sound amplification, we had to find other ways to get the sound out there. One of the most popular ways was to put a microphone in front of the instrument. This is a method that is still heavily used today, although it's cumbersome and inconvenient in a lot of applications.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Wood: Maple & Wenge - Neck Construction: 5 Piece - Nut Width: 54mm - Fingerboard: Rosewood - Frets: Jumbo - Inlay: White Dot - # of Strings: 7 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Gibraltar Standard II-8 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Circuit Type: Active - Pickups: EMG 808 - Pickup Configuration: H-H - String Instrument Finish: Cobalt Blue Metallic, Galaxy Black - Made In: Japan

The Deluxe was among the “new” 1968 Les Pauls. This model featured “mini-humbuckers”, also known as “New York” humbuckers, and did not initially prove popular. The mini-humbucker pickup fit into the pre-carved P-90 pickup cavity using an adaptor ring developed by Gibson (actually just a cut-out P90 pickup cover) in order to use a supply ofEpiphone mini-humbuckers left over from when Gibson moved Epiphone production to Japan. The DeLuxe was introduced in late 1968 and helped to standardize production among Gibson’s US-built Les Pauls. The first incarnation of the Deluxe featured a one-piece body and slim three-piece neck in late 1968. The “pancake” body (thin layer of maple on top of two layers of Honduran mahogany) came later in 1969. In late 1969, a small “volute” was added. 1969 Deluxes feature the Gibson logo devoid of the dot over the “i” in Gibson. By late 1969/early 1970, the dot over the “i” had returned, plus a “Made In USA” stamp on the back of the headstock. The Deluxe could be special ordered with full-size Humbucker T-Top pickups, these full size versions of the Deluxe were “Standard” spec. They were also available with “Gibson” embossed pickups in 1972 only and considered rare, as only 9 were produced. David Bowie Can be seen playing one of the 1972 “Standards” in his 1972 release Jean Genie video. By 1975, the neck construction was changed from mahogany to maple, until the early 1980s, when the construction was returned to mahogany. The body changed back to solid mahogany from the pancake design in late 1976 or early 1977. Inte reintroduced rest in this particular Les Paul model was so low that in 1985, Gibson canceled the line. However, in 2005, the Deluxe was with more popularity due to its association with Pete Townshend [1] and Thin Lizzy.
That's right, we have another Martin guitar. This time around it's the Martin DCPA4R from their Performing Artist series. This guitar is not really the very best they have to offer, but we feel that it combines all of what makes Martin so unique at a price that isn't impossible to afford. Because there are some insanely priced ones out there from Martin and others, but funnily they aren't the best of the best, just the most expensive.
Valco manufactured Spanish acoustic guitars, metal-bodied resonator guitars, electric lap steel guitars, and vacuum tube amplifiers under a variety of brand names including Supro, Airline, Oahu, and National. They also made amplifiers under contract for several other companies such as Gretsch, Harmony, and Kay. In the 1950s they began producing solid body electric guitars.
Much of this is probably thanks to an outdated a pedal with a two-function switch that is labeled “Chorus” and “Vibrato.” These words will trigger a sigh of awe and wonder from many a guitarist because, of course, they are the labels on the mode switch of the famous Univox Uni-Vibe. This pedal is a good place to start because it was one of the first of the transistorized effects of this type to become widely available, and it occupies a patch of ground all its own in the world of things that go “swoosh”. That said, and despite the name and switch labeling, the Uni-Vibe is more akin to a four-stage phaser than what we today consider to be a chorus pedal, even if that’s the label on its most-loved setting. The deception is forgivable when you remember that the Uni-Vibe’s intention was to reproduce the chorus-type sound—or “chorale” sound, as it was often labeled—produced by a Leslie rotating speaker cabinet used with a Hammond organ. Also, the unit existed before there was much categorization of such things: it was a guitar effects footpedal, it had its own sound… and that was all anyone needed to know. The Uni-Vibe—and the better clones that have followed it down the years—is based around a discrete transistorized circuit with four sets of light bulbs and light cells and a low frequency oscillator (LFO) which does the shifting work to move the peaks and notches. Unlike the drawing-board phaser discussed above, however, the frequencies of each stage of the Uni-Vibe are set differently, so it could be argued that there is indeed more of a chorusing of the sound. 

Controls available are extensive, but pretty straight forward and the quality of the entire package defies logic when you consider the price. In terms of budget reverbs, this one is among the best you can find at the moment. Behringer keeps pushing the line further and further by delivering quality and versatility to those who are limited financially.
I have a Les Paul Gold Top copy I bought new in the mid 70's. It has no brand name anywhere on it. I have done all the research I can and have found no conclusive results.I'm at a loss. It plays great! I do have pics. if that will help. Thanks for any help' It was bought in Montgomery Al. Clarence Carter's guitar player bought one while I was in the store so I figured ...must be a okay guitar. So I bought it. On the little square plate on the back it is hand engraved #0059. Thanks
When you’re just starting out you generally play in less than ideal conditions and your soundman, if one is present at all, isn’t going to be as well versed in his/her craft as someone who works in larger venues. Because the guitar is resistant to feedback and gives you the option to sculpt your tone without having to rely on a console, it will prove to be a valuable asset.
Editor’s Note: My previous top choice, the Yamaha APX500iii, is now replaced with a newer and better model, the Yamaha APX600. What make’s it better, you ask? Well, there were some complaints regarding the previous model for having a lack of bass response and a “bland” sound when unplugged. Yamaha addresses this issue by changing the guitar’s bracing pattern, thus improving it’s overall sound response, making the APX600 a good choice for an acoustic-electric guitar. I suggest you go check this bad boy out.
#5? Are you joking? I have a PR-200 that I've owned for 15 years. I hate it. The action is ridiculous unless your fingertips are made out of adamantium or whatever the heck Wolverine is made from. The sound is muddled and a clash of midrange. Sustain is nonexistent. The frets have flattened on the high strings. News flash- I'm not spending $350 to re-fret a $279 guitar. Epiphone may make some good high end guitars but I don't trust them. If you make crappy low end guitars why should I trust your brand? You were supposed to get me to fall in love with the brand but you've made me hate it. My next guitar will be a Yamaha, Martin or Taylor.
Digital reverbs, like their sibling delays, offer more power and a greater variety of settings. And in addition to doing some approximations of spring reverb sounds, digital units usually offer more “lifelike” reverberation as heard in anything from an empty room to a large concert hall, if you want to add a synthesized “natural” room sound to your signal rather than merely replicate the classic sproing of springs. A few pedals do this very well, but most such devices are rack units that are best used in an amp’s FX loop, and are beyond the scope of this article. For all the power of digital reverbs, however, there are plenty of guitarists who just don’t warm to them, and the tube-driven, analog, spring reverb effect remains hands-down the favorite for guitar.
[Fausto] It's calculated by the sound coming from the amp. When you stop the note, it stops the magnetic disturbance and in turn the signal created and sent. The instant it is plucked or strummed above and vibrates above the pickup, the magnetic field is disturbed, not before, not after. Harmonic resonance does occur, obviously, but doesn't affect the magnetic field disturbed between the struck metal string and the electromagnet in any meaningful way, nor does it affect the tone.
Another relatively drastic but easy and cheap way to hot-rod your guitar’s sound with its current components is to alter how and where its volume and tone pots are connected to each other. The difference can be subtle—and it’s more a matter of preference than what’s “correct”—but it can make the difference between a guitar that is just OK and one that really is a joy to play.
GuitarFX™ guitar software (it's on the market since 1997!) enables you to turn your computer into a guitar effects processor. Simply plug your guitar into the microphone or line input of your sound card, run this software, then press "Start" button. To stop playbacking pre-recorded guitar sounds click once on a picture of a small red lamp placed left to fx-slot with "Playback wav" title. Enjoy real-time crazy distortion smoothed by power filters and shaped by multi-band equalizers! Author of GuitarFX™ offers several presets, including "hard rock", "high gain lead" and "solo" effects. However, you can click through several menus to easily create custom tones. They can be saved as pre-sets for future use. Pre-sets can be assigned to "hot keys" F1..F12. Among the effects, you can apply 4 types of distortion, noise gate, wah-wah, compressor, EQ, flanger, reverb, chorus, delay and a number of other filters and effects. You can save your recordings to your hard drive. GuitarFX has the "software effects chain builder" with 16 fx slots. Clean guitar signals go to the top fx slot, then they are passed through all fx slots from the top to the bottom and go to the sound card output from the bottom fx slot. You can move any fx slot up. To do this place your mouse cursor on the top part of the appropriate "Tune" button and then do right mouse button click. Also you can move any fx slot down. To do this place your mouse cursor on the low part of the appropriate "Tune" button and then do right mouse button click.
Lol I agree I'm a nirvana freak, not a kurt freak.... but dam fender all you can make is the same butt ugly designs that you have made for years come up with a compleatly new body design and I mean COMPLETELY NEW and just use the same components or better for a new guitar called, idk caster lol or DOUCHECASTER lol don't matter to me just hive us something new

Although electric guitar sounds vary dramatically, they are all essentially midrange instruments with little or no extreme high- and low-end information. With the tone controls on the amp and the guitar itself, recorded electric guitar sounds often need little in the way of EQ if the desired tone was produced at the recording stage. However, if the sound needs a bit more bite, try boosting the upper mids somewhere between 2.5 and 5kHz. For added warmth, a little boost around the 250Hz range should thicken the sound, while muddiness is often dealt with by cutting a few dBs at around the 200Hz mark.

That said, unless the beginner had a specific focus, I never have a problem recommending Line6 spider amps. Lots of options built right in (so you save a fortune on effects you may want to experiment with), and they don’t sound bad at all. I played one a few years back in a rock band and got compliments on my sound all the time, and I put nothing else in the signal path, I played straight in using one of their floor controllers at a gig. I think the whole setup (and this was the 120 watt one) cost me something like $350 bucks.

Semi-hollow body electric guitars are basically a middle ground between a solid body electric and a fully hollow body electric guitar. Jazz, country, and rock guitarists alike may gravitate towards semi-hollow body electric guitars for several reasons. One of the main reasons is that semi-hollow body guitars still produce that rich, resonant sound of a hollow instrument, but they typically have a solid or sometimes chambered center block in between the top and back. This design helps fight off that unwanted body-resonant feedback we spoke about before while even adding some extra sustain. Gibson offers a wide selection of semi-hollow body electric guitars, which include the iconic Gibson ES-335. Guitar brands such as Gretsch and Ibanez are also widely recognized for their semi-hollow body electric guitars.