I know a lot of you out there fancy yourself as “tinkerers”, and many of you may actually be quite good at handling repair work to your own instruments, but I’ve always been more of the kind who loves to find a good repair person. Number one, if the repairer doesn’t do the right job, or there are problems with the work they did, they have to own up to it, and make sure it’s done right until you are fully satisfied. Then of course, if they are actually a selected and accredited repair person for a given guitar company, it’s even better to bring them the guitar, rather than trying to take matters into your own hands.
Hertz Guitar company was originated from Shanghai/China & North Korea. This brand of guitars produces electric and other wide range of guitars that can be used in studio recordings and live shows. This brand also manufactures guitar accessories. The starting price of guitar from this brand is 12,504 INR approximately. Anyone looking for an affordable electric guitar at a beginner and advanced level can buy this brand of guitar.

This guitar is the J Mascis signature, specifically spec’d out by the man at an affordable pricepoint. Jazzmasters will never not be cool, in part because their versatility tends to exceed expectations. Like the Modern Player Tele above, Fender leveraged much-improved Chinese production to bring this in under $500. They also opted for lesser P90 pickups compared to the expected (and usually truly excellent) proper Jazzmasters, but many players won’t notice this.
(https://rytmenpinne.wordpress.com/sounds-and-such/salamander-grandpiano/) (http://creativecommons.org/licenses/by/3.0/). Some versions on this site have been carefully edited down to 6 velocity layers and looped at the almost inaudible tail ends to reduce Ram usage but the quality is almost indistinguishable.  They are based on a nicely sampled Yamaha C5 Grand. Samples have been normalised, re-attenuated, latency reduced and modified for sf2. Three or more brightness levels are available plus optional resonance.
Gretsch was founded in 1883 in Brooklyn, with their biggest boom coming in the fifties and sixties, at the birth of rock n’ roll. Famed for making hollow and semi-hollow models, their guitars were used by icons including Chuck Berry, Chet Atkins, Bo Diddley, and George Harrison. Since 2002 the production side of things has been run by Fender, although the Gretsch family still own the company.
Because driving the power valves this hard also means maximum volume, which can be difficult to manage in a small recording or rehearsal space, many solutions have emerged that in some way divert some of this power valve output from the speakers, and allow the player to generate power valve distortion without excessive volume. These include built-in or separate power attenuators and power-supply-based power attenuation, such as a VVR, or Variable Voltage Regulator to drop the voltage on the valves' plates, to increase distortion whilst lowering volume. Guitarists such as Eddie Van Halen have been known to use variacs before VVR technology was invented.[specify] Lower-power valve amps (such as a quarter-watt or less)[citation needed], speaker isolation cabinets, and low-efficiency guitar speakers are also used to tame the volume.
When we take a look at a guitar neck, it is important that the guitar is under string tension and in playing condition when measured. The PLEK measures the instruments neck and fret height with the instrument strung up to pitch. The computer ascertained a 3-D like graph of the fret board surface, including the position and height of the strings. Thanks to the PLEK SCAN the relief of the neck made by the string tension is taken into account while calculating the process-parameters. The operator then has the ability to manipulate the parameters to give the player an optimal playing instrument.
Artists have been converging on this sound for more than a decade before Davies used it. In 1951, “Rocket 88” by Ike Turner and the Kings of Rhythm took advantage of a distorted amplifier that had been damaged in transport. The same thing happened to the Johnny Burnette Trio in 1956, when Paul Burlison pulled out a vacuum tube from his amplifier after it fell off the top of the band’s car. He loved the sound so much he used it to record “The Train Kept a-rollin,” which inspired a whole raft of British musicians:
These guys are the best in town! I had my Gretsch 6120 Upgraded with a new Pickup. They were quick and at a reasonable price. They do amazing work. They also have a great selection of guitars and Amps for sale. I highly recommend stopping by. If your looking for a new guitar for yourself or your kids they will help you find the perfect guitar for your price range. I highly recommend stopping by. They also do amp repair! Stop by and see for yourself.
{ "thumbImageID": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "defaultDisplayName": "Yamaha FX335C Dreadnought Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000000265", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst-1500000000265.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000000264", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black-1500000000264.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000000262", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural-1500000000262.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000-00-60x60.jpg", "imgAlt": "" } ] }
The Effect: Pedalboards are not guitar effects, but are an essential piece of equipment for every musician utilizing more than 2 or three pedals. Essentially, a pedalboard is a casing for guitar pedals, specially crafted to house a number of effects – typically ranging from 4 to 12. In some cases, boards come as just casings and it’s up to the player to sort out the electronic department and powers supply; in other cases, all the electronics are included in the mix and even cables are included. So in a nutshell, boards make your pedal use far more convenient and practical. In our opinion, they are an absolute must-have for any player who has more than two effects in use. For a first pedalboard I would recommend the Donner DB-2 as a great option.
Solid body guitars offer a fantastic platform for builders, allowing them to craft the wood into literally any shape. Naturally you’ll probably want to opt for a guitar with a single-cutaway Les Paul or Telecaster style shape, or a double-cutaway shape like a Stratocaster, Yamaha Pacifica, or Ibanez’s RG. However, the more extroverted beginner can check out some cool styles that always catch the attention, such as V or Z shaped guitars, or anything from Dean Guitars – especially if you want an eye-catching paint job!
We spent 45 hours on research, videography, and editing, to review the top choices for this wiki. One of the best things about an electric guitar is its portability. Most times, however, you can't say that about the amps you need to go along with them. Fortunately, these mini amplifiers have come along, developed by the top names in full-size models, and offer incredible sound quality in an exceedingly portable package. We've ranked these micro monsters by tonal character, power, and control. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best mini guitar amplifier on Amazon.

Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.
Paul Reed Smith’s offering to pro musicians with exacting standards, the PRS McCarty 594 takes its name from two things. The first is its scale length of 24.594 inches and the second is that it’s a 1959-spec guitar with four knobs. According to Paul Reed Smith, this vintage-inspired instrument aims to recreate the most desired classic Gibson tone, that of a ‘59 Sunburst.
Our first impression of this guitar was that something must be wrong. Surely this guitar is way more expensive than we thought? We doublechecked and the truth is that it’s just incredible value for money. Both the design and the sound are wonderfully good and we understand why Schecter describe their Schecter Hellraiser guitars as having “raised the bar on sight, sound, quality and affordability”- we totally agree!
As the crowds at Beatles shows got louder, they needed louder amps. Jennings provided Lennon and Harrison with the first AC50 piggyback units, and McCartney's AC30/T60 rig was replaced with an AC100 head and an AC100 2×15" cabinet. Lennon and Harrison eventually got their own AC100 rigs, with 4×12"/2-horn configurations. In 1966 and 1967, The Beatles had several prototype or specially-built Vox amplifiers, including hybrid tube/solid-state units from the short-lived 4- and 7-series. Harrison in particular became fond of the 730 amp and 2×12 cabinet, using them to create many the guitar sounds found on Revolver and Sgt. Pepper's Lonely Hearts Club Band. Lennon favoured the larger 7120 amplifier, while Harrison preferred the 730 and McCartney had its sister 430 bass amplifier.
It seems strange that we’ve come so far into an article about acoustic guitars without mentioning the ‘other’ big name in this world; Taylor. The American company has been duking it out with Martin since 1974 for the title of top dog in the world of acoustic guitars, and has come up with a few unique iterations of its own along the way. Nowadays, you could point to the GS Mini and Big Baby as examples of Taylor leading the way in acoustic guitar innovation, but back in the day it was the Grand Auditorium style which really put them on the map.
“It had ‘Walking the Dog,’ ‘Route 66,’ and others on it,” Millard says. “That has tone. The reason it has tone is that it was made in the worst damn studio possible. Everyone who worked there said this was a shithole. There was no sound separation, they used lousy mics, they never cleaned it. Andrew Loog Oldham, who was the manager at that point, said that was the key to the sound.”
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
Each Proto Pedal comes as an easy-to-assemble PTH soldering kit, and it’s up to you to solder it all together! Additionally, we highly recommend using the Proto Pedal Enclosure with this kit. It’s a standard-size cast aluminum box, which does double duty as an assembly jig to help get the jacks and switch aligned correctly. We did NOT include the enclosure with the Proto Pedal to help keep the kit affordable – and in case you already had an enclosure you wanted to use or create yourself.
Resonator guitars are distinctive for not having a regular sound hole instead they have a large circular perforated cover plate which conceals a resonator cone. The cone is made from spun aluminum and resembles a loudspeaker. The bridge is connected to either the center or edge of the cone by an aluminum spring called the spider. The vibrations from the spider are projected by the cone through the perforated cover plate. The most common resonator guitars have a single cone although the original model patented in 1927 by John Dopyera had three and was called a tricone resophonic guitar. Resonator guitars are loud and bright. They are popular with blues and country guitarists and can be played with a slide or conventionally.
The “Studio” model was introduced in 1983, and is still in production. The intended market for this guitar was the studio musician; therefore, the design features of the “Les Paul Studio” were centered on optimal sound output. This model retained only the elements of the Gibson Les Paul that contributed to tone and playability, including the carved maple top and standard mechanical and electronic hardware. However, the Studio design omitted several stock Gibson ornamentations that did not affect sound quality, including the binding on the body and neck. The two notable exceptions to this are the Studio Standard and the Studio Custom. Both models were produced in the mid-1980s, and included body and neck binding, though with dot fingerboard inlays instead of more ornate trapezoids. The first Studios from 83 to 86, except for Studio Standard and Studio Custom, were made with alder bodies rather than mahogany/maple. The current Studios come with a chambered mahogany body with either a maple or mahogany cap. The entry level Les Paul Studio “faded” has a chambered mahogany body and top and a satin finish and is the lowest priced Gibson USA Les Paul.
Up for sale is an Ibanez RGA7QM guitar equipped with EMG 707/81-7 pickups and Sperzel locking tuners. This guitar is in great condition, has never been gigged and has been kept in my smoke free music studio. Guitar Specs: Mahogany body with quilted maple top 5-Piece maple/walnut Wizard II-7 neck Bound rosewood fretboard with 24 jumbo frets Gibraltar Standard 7 bridge Pearl dot inlay
It’s apparent right away that Acousticsamples knows how to sample a guitar, regardless if it’s acoustic or electric. All frets on all the string have, of course, been meticulously sampled and taken through a round of guitar techniques: slides, mutes, hammer-ons, pull-offs, staccatos, fret noises, and a plethora of other articulations — 53 different samples per fret/string.
Interesting site.I searched make before break and you appeared.Ive just bought a Squier Classic Vibe Butterscotch telecaster and it has stock Alnico 5 pups. It got me remembering how, back in the 1960s I used a standard U.S. Tele and did the jamming in between thing. If you were careful it balanced and held in place.I always loved that position. I think, if I remember correctly, you could get between bridge and both and also neck and both.I think it was a superior sound to any 5 way switch I’ve heard. Is it possible to modify my make after break classic vibe switch to make before break or do I need a new switch? And can you buy make before break switches for a 2 pup Tele ? Thanks much.Mike.U.K.

Also in 1952, Kay introduced the matching K-162 "Electronic" Bass, which was the first commercially available thinline-hollowbody electric bass guitar, and the second production electric bass guitar after the Fender Precision Bass debuted in 1951. Due to the use of K-162 by a bassist of Howlin' Wolf, Andrew "Blueblood" McMahon, it is commonly known as the "Howlin Wolf" bass. These instruments[clarification needed] are believed to be the first semi-hollow electrics[citation needed] (i.e., thinline-hollowbody electric with solid center-block), predating the Gibson ES-335 by six years. Their unique design[clarification needed] featured a flat top with no f-holes, a free-floating arched back, and two braces running along the top. The result was a semi-acoustic instrument that was feedback-resistant while retaining natural acoustic resonances. In 1954, Kay added the K-160 bass to its catalog with baritone tuning, according to the catalog,[citation needed] "tuned like the first four guitar strings but one octave lower." Structurally this bass was basically same as K-162 bass, except for the higher pitched tuning and the addition of a white pickguard.

A band can sound good with conventional amps and PA gear. But it takes musicians who are sensitive to each other as well as the overall sound of the band. It takes a skilled soundperson who has the gear (and knows how to use it) and enough time to get a proper soundcheck.  Going direct attempts to solve these problems. Adding IEMs (In Ear Monitors) solves more. Yes, you don’t have amps blaring behind you. No, you don’t look like Jimi at Woodstock. Yes, you have to get used to the way things sound and learn how to perform without amps. 


5.  Customer installed strap button on heel of acoustic.  This was a simple job that went horribly wrong because a pilot hole wasn’t drilled.  Result:  Cracked heal.  Fix:  Careful application of cyanoacrylate glue and touch up refinish.  I’ve also seen strap button installations on guitars with bolt on necks where the pilot hole has hit the threaded insert in the heel.  Make sure you know where the insert is placed on that particular guitar before you drill.
Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
Bassists can put an incorrect (that is too low) impedance load on their amplifiers even if they connect multiple speakers that are at the correct impedance rating. For example, if a bassist has a combo amp in which the power amp is rated at 4 ohms, and she/he plugs in a second 4 ohm speaker cabinet in parallel, this will drop the impedance ("load") on the amplifier down to 2 ohms, which is too low for the amplifier. When speakers of different impedance are wired up together (e.g., an 8 ohm speaker cabinet and a 4 ohm speaker cab, the impedance is calculated differently). In most applications, when bass speakers are plugged into an amplifier, they are wired in parallel. The parallel "input/output" speaker jacks on the rear of most bass cabinets, when plugged into additional speakers in a "daisy chain" approach, will cause the speakers to be connected in parallel. More rarely, bass speaker cabs may be wired up in series, which means that the impedance is calculated differently. Series wiring is much more complicated and in cases where a bassist is using series wiring, a custom-made cabling system is typically used. Some bass manufacturers that build large speaker cabinets with multiple speakers may wire some of the speakers in series and some in parallel to achieve a certain impedance rating for the entire speaker cabinet (e.g., in 8x10" speaker cabinets, the speakers inside the cabinet may be all wired up in series, but the overall cabinet's "input/output" jacks are in parallel). Professional bass technicians and speaker designers setting up custom-made bass speaker systems for bass players from major bands may use an electronic meter to test the impedance of the speaker cabinets they design.
Synthesizer: Plug your bass guitar into a synthesizer pedal and you can access four different waveforms (saw-tooth wave, square wave, pulse wave, or your own bass wave form) that give you a wide variety of synth tones, each of which can be tweaked in several different ways. Some synth pedals offer a hold function that continues to play the tone as long as you depress the pedal, allowing you to play other musical phrases over the tone that's being held.               

Other unique features of this wonderful guitar are the 70’s styled headstock logo which effectively rounds out the look of this American instrument very nicely. Weighing just 7.2 pounds, the guitar is of pure single coil bliss! It sounds great as all Teles do and it plays like a dream. For every guitar lover, this is a true workhorse instrument to get.
The Ibanez AFC95 extends the Japanese manufacturer’s reach well into the future whilst remaining true to its roots. The elegantly styled single-cutaway hollowbody is equipped with forward-thinking appointments that extends the tonal versatility of the hollowbody further than ever before. Sublime hardware includes a delightfully nimble ebony fingerboard, whilst the ebony bridge and AFC tailpiece optimise intonation and sustain superbly.
Amp: Gain- increases and decreases how much gain your sound has. Treble- increases and decreases high frequencies in your sound, AKA the brightness of your tone. Mids- increases and decreases the middle frequencies in your sound, AKA the 'punchiness' of your tone, if that makes any sense. Bass- increases and decreases the low frequencies in your sound, AKA how much 'thump' it has.
To make a long story short, I ordered from Amazon two Epiphone EJ-200SCE guitars, Color: one Natural, one Black and the Hummingbird Ephiphone. My wife liked the black one. I liked the natural one. We decided to compare the two side by side, and sent for both of them. Later, my wife changed her mind and liked the way the natural looked and sounded. I had just listened to the Andertons review "What ones are the best, the ten times more expensive J 200 Gibson or the ten times more expensive Hummingbird Gibson comparing to the similar Epiphone EJ-200SCE and the Hummingbird Epiphone.
Another tone option for a guitarist is to put a pickup out of phase with another pickup, producing a thin "inside-out" squawky kind of sound. When 2 pickups are in phase, they work together and reinforce each other. When they are out of phase the 2 pickups are working against one another and the resulting sound is the "leftovers" from these cancelations. The closer the 2 pickups are, the greater the cancelations, the thinner the sound and the lesser the volume. Therefore, the neck and bridge pickups out of phase is the best choice for this type of sound.
Needing a more compact logo suitable for the guitars’ headstock, the founders decided to change the name to “Taylor” as it sounded more American than “Listug” and because as Kurt Listug put it, “Bob was the real guitar-maker.”[3]Listug became the businessman of the partnership while Taylor was responsible on design and production. In 1976, the company decided to begin selling their guitars through retailers. In 1981, facing financial difficulties, Taylor Guitars took out a bank loan to purchase equipment.[4][5]
After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
Power-valve distortion can also be produced in a dedicated rackmount valve power amp. A modular rackmount setup often involves a rackmount preamp, a rackmount valve power amp, and a rackmount dummy load to attenuate the output to desired volume levels. Some effects pedals internally produce power-valve distortion, including an optional dummy load for use as a power-valve distortion pedal. Such effects units can use a preamp valve such as the 12AX7 in a power-valve circuit configuration (as in the Stephenson's Stage Hog), or use a conventional power valve, such as the EL84 (as in the H&K Crunch Master compact tabletop unit). However, because these are usually placed before the pre-amplifier in the signal chain, they contribute to the overall tone in a different way. Power amplifier distortion may damage speakers.
Similar to five-string bass guitar tuning, seven-string tuning allows for the extra string a fourth lower than the original sixth string. This allows for the note range of B standard tuning without transposing E standard guitar chords down two and a half steps down. Baritone 7-string guitars are available which features a longer scale-length allowing it to be tuned to a lower range.
Since 1971 Hoffman Guitars has provided a full range of services to guitar players nationwide.   We have always worked to provide the finest in instrument repair services and handcrafted guitars.  We provide a full range of repair services, including factory authorized warranty service for C.F. Martin, Gibson, Guild, Fender, Taylor, Jim Olson and others.  I (Charlie Hoffman) have built over 600 individually handcrafted guitars, which are (or have been) played by such players as Leo Kottke, Tim Sparks,  Dakota Dave Hull, Ann Reed, Jerry Rau, Charlie Maguire and others.  In addition, we carry a fairly complete range of accessories for guitar players (strings, picks, capos, pickups, cases, etc, etc.).  In this day and age it may seem a bit anachronistic but we really believe in customer service and strive to provide the very best.
Ask yourself this question right at the beginning. Before buying a guitar you have to make sure of the kind of style you are comfortable in- be it the jazz and blues or be it country, soul or pop. Only once you are sure of the kind of style you are in for, you should move forward to buying your new guitar. Make the wrong choice, and you will have to regret for it later on.
Went here for the first time yesterday to get the strings replaced on my acoustic guitar. Kevin, the owner, completely encompasses the definition of true customer service. He not only was professional, courteous and friendly but also willing to talk me through the process as he was re-stringing my guitar when I asked if I could watch and learn. I highly encourage coming here, especially for a an excellent and personal experience! I will be back no doubt!

Sometimes a pitch shifter will retain the original signal while adding in the new shifted pitch.  The new shifted note can be set at a given intervallic distance from the original and will automatically harmonize any given series of notes or melody.  In short, it will harmonize the guitar by duplicating the melody at a 3rd, 5th, or whatever interval you define.
If a player uses a separate preamplifier and power amplifier, she or he can buy a power amplifier intended for a sound reinforcement system or PA system or pick a power amplifier designed specifically for bass instruments. These preamps and power amps come in two formats: 19 inch rack-mountable units and units with their own wood or metal case. If a player uses a rackmountable preamp and power amp, these units and any effect units, such as an audio compressors, can be mounted in 19" rack mount road cases for safe transport. When a bass player selects a variety of different preamps, effects units and a power amp and puts them all in a rackmount case, this setup is colloquially called a "bass rig". Amp heads with their own wood or metal case may use many of the same appearance and transportation-oriented design features used on combo amps. For example, if a bass amp head is designed with a wooden case, it will typically have a vinyl, felt or sturdy fabric (or painted coating) to protect the wood case during transport; a carry handle; and corner protectors.
When I first plugged it in, it made a sound like it was "fretting out" if you put a bar at the twelfth fret position. That's a pretty good feat, given that the guitar has no frets. It turned out that someone had cranked up the pole pieces for extra gain, but had cranked them so far that the strings made contact with them when the guitar was played. A quick tweak right in the store with a jeweler's screwdriver sorted them out and revealed the lovely vintage sound of this little beastie. Supro developed a neat strings-through pickup system with staggered pole pieces that this guitar features.
5) BE KIND AND CONSIDERATE! /r/Guitar is a melting pot of people from different backgrounds and skill levels. Everyone is entitled to their own opinion. If you do not agree with something someone else said, please either have a polite discussion or do not comment at all. Remember that everyone is a beginner at some point. Any inflammatory, disrespectful, and/or hateful comments or usernames will result in a ban. We have a zero-tolerance policy regarding such comments/posts. Sub/mod bashing is not productive and will be met with a ban. Contact mods if you have a complaint. Please report any comments or posts violating these rules.
Specs for your guitar include an ash body and carved maple top (rosewood was an option) bound with an abalone border, and a 5-piece maple/rosewood through-body neck. Other features include the bound 22-fret ebony fretboard with brass circle inlays, a matched-finish headstock with abalone border, 3-per-side tuners, two exposed humbuckers, and controls for each pickup. Its ivory finish is probably the most desirable color for this model, but the guitar was also available in a natural finish that highlighted the maple or rosewood carved top.

A variation on Drop E, A with the G flattened one half step to F♯; this tuning is identical to 6-string Drop A, with two E strings added: one above, and one below. Like Drop E, A; this tuning allows easy fingering on the E since it is a standard fourth interval below the A. It also provides three high strings a fourth apart instead of the usual two. The tuning is used by Infant Annihilator on their album The Elysian Grandeval Galèriarch. A 7-string variation of the tuning without the high E (E-A-E-A-D-F♯-B) was used on their previous album The Palpable Leprosy of Pollution and is used by Enterprise Earth/Delusions of Grandeur guitarist Gabe Mangold.
Music Go Round® is your ultimate used gear resource—we buy used musical instruments all day, every day. We understand the value of your instruments and make it easy for you to sell or trade. Bring your used music gear, such as guitars, drums, amps, bass guitars and pro-sound equipment —we’ll pay you $$$ on the spot—and you take home that must-have piece to your collection.
Barney Kessel was known for playing his Gibson hollow body jazz guitar and used it almost exclusively on his own recordings. But when it came to rock, pop, r&b and blues recording sessions with the most popular performers of the early '60s such as Elvis Presley, Sam Cooke, Connie Francis, T-Bone Walker, Ike & Tina Turner, Phil Spector, Dinah Washington and Bobby Darin, Kessel turned to his Kay Barney Kessel Artist guitar.
View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.
Description: Guitar Type: Bass - Body: Ash - Body Construction: Solid - Neck Wood: Maple - Neck Construction: 3 Piece - Nut Width: 42.5mm - Fingerboard: Rosewood - Frets: Medium - # of Strings: 4 - Scale Length: 34" (86cm) - Headstock: 2+2 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome - Pickups: CAP Double Humbucker - Pickup Configuration: H-H - String Instrument Finish: Natural, Black
Squier affinity series, looks and sounds great, Fender & Gibson had to start somewhere, so everyone wants to be a star & copy, but everybody's hands and minds are different, don't need to be a star or copy cat to make a name, if the guitar feels good and sounds good, so be it. Be the First, off-brand- (Star),,,,, take the cheap version to new and higher heights,

I thought I'd give a review from the point of view of someone completely new to the guitar, for those of you out there like me who are wondering if this will really teach you or if it'll be a frustrating waste of money. First off, I'll say that it isn't easy. As someone completely unfamiliar with the frets and the strings, I had a tough time starting out - very slow and clumsy. BUT, you'll see improvement REALLY quickly. I've only been playing for about two hours and although I still suck, I'm having a great time and I'm already loads better than I was when I started out. The only reason I stopped was because my finger got sore from holding down the strings. So far, for someone who's wanted to learn and either never had the time or money to take lessons, or found practice to be tedious and dropped it, or just doesn't have a mind for reading music, this is a definite recommendation. If anything changes as I get further along, I'll update this review. But as of now, I love it!


Ibanez produces a number of signature series, but none of them even come close to Steve Vai’s JEM guitars. JEM7V is by far one of the most intriguing electric guitars Ibanez has to offer, and in general. It’s performance is legendary, just like the man who designed it. I’ve had a chance to play it once and it completely blew my mind. The thing was built to be an extension of your body, plain and simple.
Once The Beatles became tied to Vox amplifiers (a deal was struck early in their recording career whereby they would be provided Vox equipment for exclusive stage use), the quest for more power began. John Lennon's first Vox was a fawn-coloured twin-speaker AC15, while George Harrison's was a fawn AC30 with a top boost unit installed in the rear panel. They were later provided with twin black-covered AC30s with the rear panel top boost units. Paul McCartney was provided with one of the first transistorised amplifiers, the infamous T60, which featured an unusual separate cabinet outfitted with a 12" and a 15" speaker. The T60 head had a tendency to overheat, and McCartney's was no exception, so he was then provided with an AC30 head which powered the T60's separate speaker cabinet.
Since they present a finer break point at the neck end of the strings’ speaking length, narrower vintage-gauge frets are generally more precise in their noting accuracy. From this, you tend to get a sharper tone, possibly with increased intonation accuracy, plus enhanced overtone clarity in some cases, which could be heard as a little more “shimmer.” If you’re thinking these are all characteristics of the classic Fender sound, you’d be right—or they are, at least, until you change those vintage frets to jumbo.
So few 1958-1960 Explorers were ever made that sightings of these are rarer still. The most notable, however, is likely the ’58 acquired by Eric Clapton during a U.S. tour in 1974 from Alex Music in NYC. I saw Clapton during the 461 Ocean Blvd. tour of 1974 at the West Palm Beach International Raceway. I recall him playing this guitar – he played it for a few cuts before the weather turned bad(there were tornados in the area that day).
I have been playing guitar, banjo, and harmonica for 60 years. I started when I was ten-years-old. I have taught guitar and banjo for a number of years. My guitar of choice is a Martin D-41, an affordable guitar that is much like the D-45. The woods and construction are famous. There are other makes but none surpass Martin. My harmonicas are Hohners given to me by my father when he passed-on. Anyone can learn. I learned the fiddle after I reached my 70's. Just listen, play, and learn. Don't give-up. There are many good guitars, and banjos. Martin makes the best, and Stelling makes the best banjos. I started-out with a japanese banjo in the 1970's. A white Eagle, distributed by Alvarez.
In the fall of 1954, Daniel started production of solidbody guitars for Sears, under the Silvertone name. He also produced the same guitars under the Danelectro name, sold to other jobbers. These early models didn't have truss rods but had a 3/4" square aluminum tube beginning at the peghead and through the body to the bridge. The bodies were constructed of solid Poplar wood. The Silvertone models were covered with a dark maroon vinyl covering, while the Danelectro models were covered in a whitish tweed material. Both lines came with either 1 or 2 pickups, concealed under a baked melamine pickguard. Concentric stacked tone and volume knobs were used on the two pickup models only. Notably, when both pickups were used together, the tone was much stronger. This was due to wiring the pickups in series, instead of parallel like most other maker's two pickup guitars.
When discussing the science of tone, it’s safe to assume that we all know how electric guitars work. Pickups are electro-magnets that sense string vibrations and produce a signal that ultimately blares out of the amplifier. Of course, we all know that myriad other factors influence the sound, as well. Body shape, wood choice, string selection, pedal effects, rack effects, humidity, amount of people in the room, and the guitar player’s recent fight with his girlfriend are just some of the items that can alter a guitar tone from performance to performance.
Amazing guitar for the price point. It's build is so accurate it requires no setup, just tune and it's ready to go. Great rich sound, very bright, great action up and down the neck. I can't put it down and I'm enjoying it more than my six string acoustics. There's something very forgiving about playing a 12 string vs a 6 string, the neck is slightly wider and there's more room for the fingers, and the pressure points on the fingers are wider too which lends to smoother playing.

On the other hand, practicing with your band should allow you a bit more flexibility with sound. You can ask the rest of the band to accommodate for you a little, lowering the sound on their own instruments (ask the drummer to be nice to the drums). Even during an all out practice session a small amp might be able to keep up with the rest of the band’s volume, if powerful and high quality enough.
Some bass amplifiers have an "overdrive" or distortion effect built into the unit. The Peavey Century 200 has an onboard "distortion" effect on the second channel. The Peavey VB-2 also has built-in overdrive. Aguilar Amplification's AG 500 bass head is a two-channel amplifier, one of which offers a "saturation" control for overdrive. A variety of BOSS combo amplifiers have a built-in "drive" effect. Gallien-Krueger's bass amp heads have a "boost" control which provides a simulated tube overdrive effect. The Behringer Ultrabass BVT5500H Bass Amplifier Head has a built-in limiter and overdrive. The LowDown LD 150 bass amp has a range of overdrive sounds, from a slight hint to heavy distortion. The CUBE-20XL BASS amp includes built-in overdrive.
The fretboard wood is used for the part where the frets are installed (front of the neck, where you press on the strings). All our fretboards are built from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
In around 1988 Martin introduced a line of Stinger amps and effects pedals. Amps included the FX-1 (10 watts, 8″ speaker, “Tube Synth” distortion circuit, $152), the FX-1R (15 watts, 8″ speaker, Tube Synth, spring reverb, $220), FX-3B (15 watts, 10″ speaker, compression, separate pre-amp and master volume controls, 3-band EQ, $189), FX-3C (30 watts, 12″ speaker, Tube Synth, chorus, $299), and the FX-3RC (65 watts, 12″ speaker, Tube Synth, chorus, reverb, effects loop, $379).
Gibson guitar are among the best in the world, but they can also be a little expensive. You can go with an Epiphone, but Gibson always has a few good options under the $1,000 mark as well. If you love the idea of owning a Gibson Les Paul but you’re struggling with the cash part of it, check out the Les Paul Faded. A little while back I grabbed the 2016 version and it’s been a fantastic guitar with the tone and feel of a Les Paul, minus the big price tag.
The most important thing to a 5string is the tone ring with a resonator, I've been plays 36yrs. I have an Alvarez Denver belle flat top tone ring, a White Eagle archtop tone ring and my favorite is a Hohner artist flat top tone ring. Regarding a guitar my choice is a Martin D-35 ease of play & tone that is awesome! a 5 string take Many hours & months of practice on your rolls, forward, backward alternating thumb pattern, keeping your timing in check so you do not hit the string with your middle finger out of synch. Good luck have fun, no time better to learn than now!
The iconic Les Paul Standard is celebrated by the world’s greatest musicians as the standard for perfection in the world of electric guitars. The new Les Paul Standard features the popular asymmetrical SlimTaper neck profile with Ultra-Modern weight relief for increased comfort and playability. Impeccable looks are highlighted by the powerful tonewood combination of mahogany back and carved maple AAA figured top. BurstBucker Pro humbuckers provide modern and classic tones, while immense tonal variety from comes from 4 push-pull knobs. Includes hardshell case.

"Of course using effects pedals isn't cheating. I personally would define cheating as using corrective technology of some sort to falsify an artist's performance/musical ability, and I don't think that's what using pedals do. They're used for creative purposes, to manipulate sounds for artistic effect and suit personal tastes/whatever suits the mood of a song. They expand the range of timbres you can get from only using one instrument.


Next up we have the specialty electric guitars. This category consists of several different types of electric guitars, but we’ll start out with 12-string electric guitars. The fact that the low E, A, D, and G strings all feature higher octave strings while the B and high e strings both have additional strings that are tuned the same, electric guitar 12-string models have a distinctive shimmer and richness to them that guitar players love. Guitar players who favor heavier genres like death metal or hard rock may want to add a 7-string, an 8-string, or even a 9-string electric guitar to their rig for when they need some extra low-end growl and power. Other specialty guitars include baritone guitars, double neck electric guitars, and pedal steel guitars & lap steel guitars.
×