The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.

The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.
No tricks here, the volume control allows you to adjust the output level of your signal. But, unlike your amp's gain setting, the best signal-to-noise ratio will be achieved with the pot all the way up. If you have more than one volume knob, it means each controls a pickup. Middle positions can be useful with amps that don't have too much power and distort very easily or to get a crunch sound with a fat saturation. We can also use it as an effect by turning the knob progressively and playing a chord to make it appear (or disappear).
Judging by many of my last few years guitar purchases (on Ebay and elsewhere), I’m the kind of a person who seems to think he’s the kind of a person who likes guitars with a lot of knobs and switches. I’ve bought several multi-pickup guitars. Old ones, new ones, new ones made to look like old ones (not those stupid “relic-ed” ones, though…I’m an idiot, but I’m not stupid). Yet, as I look at the keepers in my collection, I’ve only kept one guitar with more than four knobs, and none with more than two pickups. Odd.
Distortion – A dynamic effect that sounds like your guitar is being played through a loud, distorted amplifier. This can range from a slight crunch to a full-on metal distortion. The first distortion tones boosted the gain of an amplifier’s pre amp to the point where the guitar signal begins to “clip”. This clipping changes the harmonic structure of the guitar sound and the additional overtones heard as distortion. Connecting distortion pedals to the “front” of the pre-amplifier helps create the break up sound before it reaches the power amp.

The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 
By 1968 (and probably with the union of Unicord), Merson and Gulf + Western, Univox amps had begun to employ a Japanese-made chassis in Westbury-made cabinets, still with the high-quality Jensen speakers. These combined tube output with transistorized components. They were covered with a black Rhinohide vinyl and sported a silver plastic logo with stylized block letters – initial cap with a little tail off the left followed by lower case letters – typical of the earliest imported Univox guitars, on the black grillcloth.

The aim of this paper is to analyze through the finite element method (FEM) the dynamical behaviour of the ligno-cellulose composite plates from the structure of guitar. First it had been done the geometrical modelling of the structures from the plates, as the body of the classical guitar - size 4/4. Then the different structures were analyzed with finite element. The dynamical response had... [Show full abstract]

Without a doubt, dont even entertain the idea of getting one, I was given one by an unfortunate friend who bought one, to try and get it to at be semi playable.. the necks are not even straight, in fact , you could ski off them.....the frets stick out from the side of the neck, the strings are so far off the neck you cannot even fret them down.... There must be no quality control whatsoever in the factory..
Much like the FG series model we have talked about above, this guitar is made solid and has passed Yamaha's unforgiving quality control. You know precisely what you're getting and how it'll perform because each guitar in this line-up is exactly the same as the next, with no discernible variation. They went with a nice solid Sitka spruce top in combination with a rosewood back and sides. This should tell you right away that the guitar is going to be very responsive aurally.
FINISH DRILLING THE HOLES After you have shaped and carved the body and the neck holes are drilled and the cavities routed out, you can preposition all of you parts and drill the last of the holes. Start with the pickup rings. It is good to assemble them first and then drop them into the cavity so you can line them up and mark where you will need to drill. Make sure they aren't crooked when you line them up. I like to have the neck bolted on so I can line them up with it. I do the same thing with the bridge. Be sure to check that the scale length is correct and that it is lined up with the neck as well. Drill the holes for the mounting screws and then the string through holes. Try to keep the drill as straight as possible when you do this because you will be going all the way through the body and if they aren't straight you will see it on the other side. This is the time that I wish I had a drill press.
I have owned a lot of amps over the years. I am also a dealer in music accessories. Please note that we do not sell these amps, so I am not endorsing and using something my shop sells. I recently have bought a couple of amps in a series (I bought one first and then bought another) and have been really impressed. The Vox AV series. http://www.voxamps.com/AVSeries
The Epiphone Les Paul Special II Vintage Sunburst has a mahogany body and neck which gives the guitar a nice thick sound. The quality of the tuners and pickups are okay, not superb, but good enough for any beginner. If you are into metal, rock or blues the two Epiphone humbuckers do a pretty nice job, they sound really good and give you a nice fat sound. A pretty reliable and solid guitar even for live playing.
Jump up ^ "New Sales Avenue Opened with Tone Amplifier for Stringed Instruments". The Music Trades. October 20, 1928. This tone amplifier is electrically operated either by alternating or direct currents. It consists of two major units -- an electro-magnetic pick-up and amplifying unit. The electro-magnetic pick-up is built within the instrument and is attached to its sounding board. The unit is connected with the amplifier, which produces the tone and volume required of the instrument.
Les Paul developed one of the first practical solid-bodied electrics made of wood, which he dubbed "The Log". He built the prototype himself -- possible the first practical solid-bodied electric -- in the late 1930s. In 1941, he approached Gibson about making it, Gibson, but they weren't initially interested. Meanwhile, Leo Fender had been independently been developing his own solid bodied guitar, which was released commercially as the Esquire in 1950. By then, lots of people were recording electric guitar.
Of course, we’ve already mentioned the cool offset Jaguar shape of the body, which will turn plenty of heads whenever this budding bassist hits the stage. But with an active bass boost circuit, you also have the option to bump the sound of this way up past what’s normally afforded in a passive bass. Not to mention, the chrome hardware and the curved vintage logo print on the head really put this bass guitar over the edge visually.
The guitar is one of the most beloved musical instruments of all time. Guitarists tend to wear that title with pride, and their instrument becomes an extension of the player’s distinct personality. Because of this, players tend to develop a strict loyalty to the guitar brand of their choosing. Luckily, there are many great options out there today, with niches that cater to virtually all genres and styles. This guide will weigh the pros and cons of the five best guitar brands on the market, to help you make as informed a decision as possible on which brand will best suit your needs.
Many people think that electric guitars are going to be loud when they are plugged in... well they can be, but they do have a volume control, so you can control the volume. Also, be aware that you do not have to plug them in! I do probably half of my practice on an electric guitar without an amp at all. It's good to get the notes ringing out loud and clear without an amp, so as a beginner you might want to put all your money into getting a cool guitar and leave getting an amp until later (these days there are some awesome software products and even smart phone apps that sound great!).
50 jazz blues acoustic Acoustic Guitar artist blues blues guitar lesson business chord progressions chords comping creativity david hamburger fingerstyle greatness guitar guitarist guitarists guitar lesson Guitar Lessons guitars improvisation jamming jazz jazz blues jeff mcerlain Larry Carlton licks live music musician musicians performance phrasing playing power tab producer producers producing recording rhythm rock tab notation truefire tunes video
#A1056:Another super rare piece from Guitars West! This little number found its way across the pond and onto our doorstep. A very early VamPower 70's 100 watt P.A. 6 channel input head. With speaker channels, one 4 ohm-100w-#1 & 2 input, one 8 ohm-100w-#3 & 4 input, one 15 ohm-100w-# 5 input, two 8 ohm-50w-# 1 & 2 input, two 15 ohm-50w-# 3 & 4 input.
The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 

• Them Changes: Since the strings on acoustic guitars play a much more important role in projecting volume and clarity than strings on an amplified electric guitar, considering changing acoustic guitar strings often to keep an instrument sounding its best. Remember to wipe down the strings after playing and check for string damaging fret wear. Both can prematurely end a guitar string’s life.
Rhythmically I can make Shreddage II sound as authentic as a mock up can get for that instrument (which means, mostly authentic)...through conscientious (more like anal-retentive) programming and manual round robins. But of course it's always a much better idea in this case to just do the mock up and eventually get an actual guitar player yourself to record. It's extremely hard to get that edgy lead thing going, bent up and held vibrato notes.

In 1967 Vox introduced a series of guitars which featured built in effects such as Distortion (fuzz tone), Repeat Percussion (percussive tremolo), Treble/Bass Booster and a wah-wah operated by the heel of the picking hand pushing on a spring-loaded lever over the bridge. The Delta phantom style guitar and bass, the Starstream teardrop 6-string, and Constellation teardrop bass had such effects.
Now, as others have mentioned, there is a switch that controls which pickup (or pickups plural) you want to use at any given moment. Seeing as each pickup is placed at a different point under the strings, the vibrations are slightly different. The closer the strings are to the bridge at the bottom, the more 'narrow' and intense the vibrations get. Thus the current generated from the magnets lead to different sound characteristics.
Rule 1 - There is a logical order for groups of effects. Some effects remove or add certain amount of frequencies, some change the basic shape of the audio waveform, and others react to the shape and amplitude of the waveform. Those are three main types of effects that logically can't come in any other order than they were just listed, or you end up with amateur results. The reason for that becomes clear in the next rules.
There’s a lot of knowledge here to digest, so the best advice anyone can give you is not to sweat it too much. You aren’t going to become a pedal encyclopedia overnight, and even if you could, you’d be missing out on the fun experience of trial and error that comes with figuring out your first pedals. The truth is that some of the most distinctive guitar and bass effects ever recorded have been the result of artists experimenting with effects units they’d never used before – especially in the 1960s, when pedals were brand-new to everyone.
The Jackson JS22 Metallic guitar is a Dinky Blue guitar featuring a cut-away body type with solid body material. This solid body electric guitar is designed as a stage ammo metal for the serious and committed guitarists. The body of the Jackson JS22 is made of solid wood with basswood body finish, gloss orientation with right handed neck shape, with dinky neck consisting of maple wood.
The guitarist and composer Francisco Tárrega (b. Vilareal, Spain in November 29, 1852-d. December 15, 1909) was one of the great guitar virtuosos and teachers and is considered the father of modern classical guitar playing. As professor of guitar at the conservatories of Madrid and Barcelona, he defined many elements of the modern classical technique and elevated the importance of the guitar in the classical music tradition.
I inherited a guitar and am looking for any information I can about it. It is a Kent model 533 Videocaster. I have no idea when they were made or what this one might be worth. It is a solid body, but I know next to nothing about guitars so I am not sure what other info might be needed. It needs to be tuned/serviced and possibly needs a little restoration, but otherwise it works and is not in horrible shape. Any info would be appreciated.
Good results are usually achieved using a dynamic instrument microphone placed 6-8" from the speaker, off-center. If more low-end is needed, move the microphone closer in (2-5") for increased cardioid proximity effect. Use your ears or a set of headphones to find the "sweet spot" of the speaker. Consider miking the guitar itself with a small-diaphragm condenser in the area of the picking hand aimed toward the bridge, for extra string texture in the track.
No doubt many of you thought that the very first electric guitar was Les Paul’s legendary “Log.” Well, regardless of who was responsible for its invention and evolution, electric guitarists throughout the world are truly grateful for the ability to amplify their instruments, as are their audiences. This capability to connect to dedicated guitar amps along with the use of distortion and guitar effects has spawned entirely new genres of music. Pickup types and configurations, as well as specialized switching options and tone controls also help generate different sounds. But when you break it down to the basics, there are really only three types of electric guitars in existence to this day, excluding acoustic-electrics - the aforementioned Hollow Body, Semi-Hollow Body, and Solid Body varieties.
Minor chords arise as the tonic notes of minor keys that share the same key signature with major keys. From the major key's I-ii-iii-IV-V-vi-viio progression, the "secondary" (minor) triads ii-iii-vi appear in the relative minor key's corresponding chord progression as i-iv-v (or i-iv-V or i-iv-V7): For example, from C's vi-ii-iii progression Am-Dm-Em, the chord Em is often played as E or E7 in a minor chord progression.[24] Among basic chords, the minor chords (D,E,A) are the tonic chords of the relative minors of the three major-keys (F,G,C):
Some resonator guitars possess metal bodies and these are called steel guitars. This can lead to some confusion with the Hawaiian guitar of the same name. They are two distinct instruments. The Hawaiian steel guitar takes its name from the steel bar used to create the glissandi and the Resonator steel guitar refers to the material used for the construction of the body.
These soundfonts were started by converting some presets from the gig files using cdextract demo and then altered using Viena, Swami and SF2Comp. The gig files are better as they contain more samples and a better variety of presets that were not possible in the soundfont format. For instance, I could not include the Fender reverb samples as the release samples would all play at the same volume no matter where in the envolope the key was released. So, if you have a chance you would be better off to use the gigasamples. They can be used in LinuxSampler of which is free and runs on windows and linux. Some people need samples in sound font format though, so I have created these samples out of the same samples that I used for the giga samples. I also have an impulse response of the Fender Reverb that I made with voxengo for download on the Other Stuff page so you can use that if you want to get the reverb sound with the soundfonts. At the moment I use Freeverb3 for realtime impulse in windows and Jconv in linux.
An utterly odd topic would be a discussion of woods for a certain tone. Wood does no magic to the tone. It has properties which might change the resonant behavior of a guitar body. But, that it does by some very course parameters, say stiffness and specific weight. Of very same importance is the shape of the plank which is referred to as “the body”. Stiffness, weight and shape work all together.
The Tone knob is basically a filter to cut highs. And, once again, the pickup will sound best when turning it all the way up. With the ever-growing amount of effects amps have to offer and those available in pedal format, we often forget that this setting even exists. This basic control allows you to, for example, smoothen a jazzy sound or choke a way-too-shrilling fuzz, or anything else in that line that comes to your mind. Only your ears can tell if the sound is convincing or not!
For more control and fine tuning of your sound, you may want to use a parametric or graphic EQ. A parametric EQ allows you to adjust the width of the frequency band that's being altered and the shape of the curve—how abruptly the boosted or cut area changes to the unmodified area. A graphic EQ divides the frequency ranges into a number of narrow bands which can each be boosted or lowered by sliders, thus giving you a visual or "graphic" representation of how the EQ is being affected. The more bands there are, the more precise your adjustments can be.
Hum: other than singlecoil hum, it is almost certainly caused by a ground issue, either a faulty string ground or ground connection, or a ground loop. I highly recommend going to Star Grounding. Shielding is also recommended. See the guitar nuts site for more information on these topics. Single coils are very succeptable to rf frequencies such as emitted by flourescent lights, tv's, computers, motors etc. Also note that high load or other appliances running on the same electrical circuit can cause noises through your amp.
In 1933, Dobro released an electric guitar and amp package. The combo amp had "two 8″ Lansing speakers and a five-tube chassis. Dobro made a two speaker combo amp that was on the market over 12 years before Fender launched its two-speaker "Dual Professional/Super" combo amp. In 1933, Audio-Vox was founded by Paul Tutmarc, the inventor of the first electric bass (Tutmarc's instrument did not achieve market success until Leo Fender's launched the Precision Bass). In 1933, Vega sold a "pickup and amplifier set" which a musician could use with her/his existing guitar. In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson developed prototype combo amps, but these never got produced and sold. By 1935, Electro/Rickenbacher sold "more amps and electric guitars than all the amps and electrified/electric guitars made from ’[19]28 through the end of ’[19]34, combined".[1]
Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.
Peavy amps are especially well appreciated by the metal community, thanks to their good overall reliability and the high volume of sound some models produce. The 6505 Series is a favorite of metal guitarists due to its power and versatility. This is most often used as a head for double stacks of speakers, but it can also be purchased as a 2×12” and 1×12” combo for convenience.
Great sounding pedal reasonably easy to assemble. First, if you havent much experience, take the time to study up on PCB's, it's not step by step. If you have trouble reading the resistors there are apps that tell you the values by scrolling through the band colors. My only problem was wiring the jack outlets because the print isn't that great in that area. 2 or 3 components didn't match the PCB's labeling but I looked at the product's pic and figured it out. It took about 3 1/2 hrs with eating dinner in there somewhere. Now some friends want me to make them one also! 4 stars because of the jack outlet picture and no green wire
Finding spare parts for vintage guitars is not always easy. Manufacturers come and go, very often changing specifications throughout the course of a guitar's production; identifying exactly the right specification part can be very difficult indeed - but we aim to help you find the correct part for your instrument. We have many years experience in restoring vintage musical instruments: if you need help, please do get in contact.

The components are adequate. The electronics are good, have good tolerances, but the off board components are cheap and flimsy. The hardware is quite good, especially the enclosure. The PCB is well designed and well labeled. The big problem is that the layout instructions are quite poor and mislabeled in a number of places. There is no bill of materials so the components can be quite difficult to distinguish even when they're labeled. Additionally, product only includes one color of wire and does not include digital instructions as indicated in the product description.

This budget price range is home to compact, low-powered combo amps, which are mainly designed for beginners and home practice. Despite their low volume and limited features, you can find some exceptional sounds and versatility that will make practice sessions good fun. This category can throw up some poorly made cheap amps, so stick to bigger brand names, such as the Blackstar ID:Core 10 V2, which is a great example of what a $100 guitar amp should offer, including low power, decent tone, good EQ and a variety of amp voices. While you may outgrow one of these affordable amps after a year or so, they are a great way to begin.
Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.

There is traditionally a gap between how we enjoy the sound of our guitars and the way they’re represented plugged in. Enter Yamaha, a leader in stage-ready acoustic technology for decades - and in the A5R ARE, it may have just offered us a very desirable solution. The A5R''s rounded fretboard edges offer an enjoyable playing experience that mimics the feeling of guitars that have been played in to a degree and it has an ethereal quality in the high ranges, even though some treble resonance is traded with the lower action. The A5’s resonance and bright balance is a fine showcase for the clever SRT2 preamp - we actually couldn’t dial in a ‘bad’ sound on it because the treble and bass controls mirror the natural subtlety of the pickup/mic dynamic design. An electro experience that captures the sound of an unplugged acoustic? The SRT2 is one of the closest to get there yet. An update that marks the A Series out as an essential consideration for players who rely on a consistent and controllable stage sound.
We started finding that this type of construction leads to the neck bending (or bowing) after about 6 months. Unfortunately with the traditional method there is not an easy way to adjust it back to normal - once it is bent it's time to get a new guitar! This lead us to re design our classical guitars to use a truss rod. A truss rod is a much stronger example of the bar used in traditional manufacturing, but its main advantage is that it is adjustable. So if in the future you neck begins to bend it can easily be adjusted back into correct shape.
Hollowbody guitars feature full hollow bodies much like acoustic guitars do, and are used often in jazz and mellow style music as exemplified by Jazz greats that include Joe Pass, Pat Martino to name a few. It is however not limited to just that as exhibited by Brian Setzer and his Rockabilly style, along with Chet Atkins and his iconic country guitar playing.

Why We Liked It - As with Gibson’s other premium products, this is not a cheap electric acoustic, but you do get exactly what you pay for. One of the very best and most legendary acoustics with an electric edge. It’s going to be the guitar of choice for real enthusiasts and of course touring professionals who will settle for nothing less than the best. If you are on a budget, try one of these cheaper electric guitars.

The most defining feature has got to be the neck. It’s thicker than the standard Strat neck, which gives extra meat to work with when bending those strings. Even the fretboard was designed around this technique, with its narrow frets and flat fretboard. It’s not the cheapest one out there, but Fender Stevie Ray Vaughan Stratocaster is definitely one of the best Strats around.


As an acoustic guitar player, and not a very good one at that, I'm always looking for some advantages, and by advantages I mean something that will make me sound better, not necessarily play better. So when I heard about a device that can add distortion, or reverb, or echo effects to an acoustic instrument, without needing to plug in to an external amp, I didn't believe it until I saw/heard for myself.
“The bottom line is you get a better dynamic response from the coil. Most people who play a hand-wound pickup say it sounds more ‘open’. It’s easy to make a pickup sound brighter but to have a truly open voice it’s got to be dynamically responsive – and that’s what scatter-winding [intentionally irregular hand-winding of a pickup coil] does. Also, compared to a machine-wound coil, the frequency response is slightly extended. So the sound is bigger and you hear more not just in the high frequencies but also in the depths of the frequency response.”
You will agree with us that the journey to the Canaan land of guitar mastery isn’t always one with bed of roses. Rather, it seem very daunting, especially with so many different types, styles, shapes and sizes in the marketplace—all craving for the bulging eyes of your wallet. But as with anything, the options before you can become clearer if only you can endeavour to filter out the unwanted options—that is, those that aren’t compatible with your immediate needs.
One of the key features that makes this stand out is the 7-inch high-resolution touch display which allows you to move amps, effects and set up your pedal board to exactly how you want it, sculpting the chain to your exact specifications. Want to run a reverb pedal before a distortion? Well, just move it around using the touch screen! The OLED scribble-strip and assignable colour LEDs appear above the switches and allow you to keep track of where your effects are – a great idea!
Maton JB6 is a 1970s guitar manufactured by Maton. It features a thin solid body, short scale 24 fret design, two humbucking pickups, two tone controls, one volume, in/out phase toggle for bridge pickup and standard three way pickup selector toggle switch. The body has double cutaways, set neck and heavy metal base plate supporting a stop piece and bridge for increased sustain.
Also called a “wah-wah pedal”, the wah was one of the earliest effects designed for guitar players and has remained popular ever since. Basically, a wah uses a pedal and filter to sweep the tonal range from bass to treble, creating a vocal like “wah” sound. Some players also use them as a tone control leaving the pedal set at different settings to get different tones.
Many people think that electric guitars are going to be loud when they are plugged in... well they can be, but they do have a volume control, so you can control the volume. Also, be aware that you do not have to plug them in! I do probably half of my practice on an electric guitar without an amp at all. It's good to get the notes ringing out loud and clear without an amp, so as a beginner you might want to put all your money into getting a cool guitar and leave getting an amp until later (these days there are some awesome software products and even smart phone apps that sound great!).
If you already have an electric guitar and you're looking for replacement strings, carry cases, guitar stands, or other accessories, you've come to the right place. Amazon.com offers a selection of tools and accessories designed for players of every age and skill level, from beginners to pros. Look for amplifiers, cables, and microphones too—you can enjoy great selection right here online, with no need to make a special trip to the guitar shop.
Let’s start with body style. This is quite simply the shape of the guitar’s body, and there are potentially a lot of them to consider. As a general rule, the larger the body, the more resonant it will be, giving it a deeper, richer tone. This is clear for things like the hummingbird, with the big square shoulders, and the dreadnought style body, which is generally the largest body type you’ll encounter. The drawback of larger bodies of course is that they’re more cumbersome and less ergonomic to play.

The ‘boomer’ kids wanted their own voice and opinions to be heard, they wanted to be taken seriously – and like the quote from the 1966 film ‘The Wild Angels’ which exaggerated this rebellious angst to the extreme “…We wanna to be free to do what we wanna do…”  There was a sense of needing to rebel against ‘The Man’ – basically anyone who told them what to do or how to conform to society respectfully.
Power chords are one of the staples of rock music and one of the most important guitar chord types you need to have in your toolbox. They are important to learn for a few reasons: They’re easy to play They’re used a TON in many popular songs and are very versatile. They’ll help broaden your repertoire of guitar sounds / styles. This post will walk you through step-by-step what a power chord is, how to play them and what songs you can learn to start practicing them. What are Power Chords? Whether you play an acoustic or electric guitar, you are going
Definitely, Diary of a Madman is like…the groundwork for so many great songs out there today. And if you listen to that live solo after Suicide Solution, which is only done live, it's just crazy what he could do that you didn't think he could do. If he was still alive, even if he left Ozzy, we would have seen even better stuff from him. Crowley and Crazy Train were actually more watered down marketable songs. That's more or less why Randy was GOING to leave Oz in the first place.
Here we have another excellent FG160 for your serious consideration the Yamaha FG 160 Acoustic Guitar Made in Japan in the early - mid 70's from Nippon Gakki factory. This example is an early 70's a more RARE version Yamaha FG 160 again this example is the Made In Japan Nippon Gakki and not to be mistaken for the similar Korean version of the FG-160 which is also nice but not the same as these apples/oranges. This example is MADE IN JAPAN and was built well over 35 years ago and was built to very high detailed standards as well as some of the best Exotic grained Honduran Mahogany woods available ( see pics please for that detail ) in that time period to compete with the great Martin and now this Yamaha is quite well aged with beautiful patina of a true vintage instrument and is a true vintage guitar in its own right. This one has the Amber/Tan label and not the Red Label but the golden lable. The frets are very good - original. The guitar has it's natural age and patina with a few expected minor nicks,dings from a well loved and adult respected instrument. This fine example is here and in stock... We upon receiving have remove the strings cleaned and detailed the guitar oil rosewood and polish finish, and this guitar to plays very well and optionally available upgrade if wanted please ask us...may include new bone nut/saddle/ we have several of these old Yamaha's and they are truly amazing instruments very well compared to Martin, Taylor, Gibson for there fine construction and playability with amazing tone for this kind of money... Here s a link to Harmony Central if you care to rehttp://reviews.harmony-central.com/reviews/Guitar/product/Yamaha/FG-160+/10/1 All New pics ... Interested ? ask Thanks . .
If you have been playing for a year or two and are looking at something to replace your current model, it would be wise to save a little more and go for a mid-range guitar that may cost between $300 and $500. On this kind of guitar you’ll notice a big difference in sound, as well as the feel of the instrument and the overall playability. Use this page as a starting point to find something that may suit you. Until then, you are probably best off sticking with your current guitar.
Washburn - With a long history that dates back to 1883, Washburn makes various types of guitar related products including electric, acoustic, bass, amps, banjos, mandolins and amplifiers. Their old acoustic guitars were involved with Delta blues back in the 1920s, while now, they are recognized mostly for their metal/rock friendly electric guitars.

 South Korea has been one of the largest OEM guitar factories in the world since 1980's. Nonetheless, the words "Made in Korea" still invoke visions of low cost alternatives to high-end manufacturers. At Swing, our mission is to lay these stereotypes to rest, and show the world that we can produce true professional grade instruments, made by professionals, for professionals. (Of course, company is not a patriotic organization. This is a matter of manufacturer's pride and self-satisfaction that can be called "Professionalism".)
Central to Fender success aside from the guitars that carried the brand all this years are the amps they make which are pioneering themselves in giving guitar players unique set of tones and unmatched overall sound quality. This is what we can say are the indicative sign and facts on why players should get their hands on a Fender Super Champ X2 for a beginner amp.
The tone selector on an electric guitar controls the capacitor, which basically filters out high frequencies. The same way a high-cut filter (or low-pass-filter if you prefer) works on a standard equalizer. By dialing down the tone, you remove brightness and treble. The pickup selector does just what it's called.. Selecting which pickups being used to capture the vibration of the strings, and translates the energy into electric current, though the configuration and number of "presets" can vary from guitar to guitar, depending on how many pickups it has etc. If you're a handyman you can even configure this yourself.
The actual key that this song was written in is Bb (B flat) and can be a bit difficult for beginners; I prefer using a capo for this song and playing it in the Key of C. Using the capo to play this song doesn’t change how the song sounds, but it makes playing the song a lot easier. Using your capo on the third fret, you chord progression will look like C – G – Am (A minor) – F.
Ate you guys just starting, or just bored? Curious is all, its seems that the ?s and statements alike are from beginners, which all of us started out with, there are many pro sites that will give you better advice. Advice at least boogie gave good support. Another thing is always wipe your strings down Everytime you finish playing. The slinky's are easy to play but rust very quickly and lose tone. GHS has a decent set of steings, but it's like anything else you get what you pay for. Come on guys ur talking about strings that are $4.
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
Also still in the line in ’66 were our old friends, the MJ series. These were essentially unchanged except for a new striped metal guard, the new hooked headstock, and a new chrome-covered oval pickup with an oval indentation stamped in the center and six flat, round poles. Available were the MJ-3L (Teisco Del Rey ET-300), MJ-2L (promoted in Japan, but not the U.S.) and MJ-1 (Teisco Del Rey ET-120). The MJ-1 had a new on/off rocker switch and a second rocker for solo/rhythm. Promoted in Japan, but not the U.S., was the little BS-101 bass, pretty much unchanged from before.
A common mistake that most beginners do is buying a guitar without checking the wood quality. Many sellers deceive buyers with shiny and very attractive guitars that are of very poor quality and come in cheap prices. We can help you out of this trap so that you aren’t fooled into buying a poor quality guitar. You can visit our website before you make your purchase, and read through the specifications of any guitar. By doing this you will know the kind and quality of wood that has been used to make a guitar before you decide to buy it. So ensure you check the wood quality of a guitar before you consider buying it.

Pitch Bend/Shifting: From a simple octave above the note you’re playing or at intervals in between, a pitch shifter effects pedal will change the pitch of your note or chord. More sophisticated pitch shifters create two or more harmony notes so you can accompany your root note for a fuller sound. Some simulate a chorus effect by providing minute shifts in pitch.
The good people at Cordoba, therefore, sought to make a Spanish-style guitar with the traditional sound of a Spanish guitar, but the slimmer body and slightly narrower neck of a steel-string. They also added in a Fishman-Presys module for switching the guitar from an acoustic sound to an electric (including a built-in tuner), hence the “Fusion” in the model name.
Players discovered that, if you put the switch in the right position, you could get the neck-and-middle and bridge-and-middle sounds. Jimi Hendrix is a popularizer of this technique, and it became popular enough that the Strat got wired stock with five-position switches. Eventually the middle pickup was made reverse wound and reversed polarity, so that neck-middle and bridge middle would effectively be noiseless, humbucking positions.

Here we have a real vintage Rare IBANEZ CONCORD beauty from the Golden Era of the Best Japanese Martin D41 style guitars period... This example is Ibanez Model #679 and is the Top of the Line and is an exact Martin copy and is a great " Law Suit " model from the era where Ibanez set out to make the best guitars worldwide period...Fit and finish even after 30 years it is simply superior it appears to be thin old school Nitrocellulose Lacquer finish, this guitar was constructed using the best woods very ornate intricate triple bindings with lots of beautiful inlaid abalone on the Brazilian Rosewood fretboard and the spruce top body WoW...please do have a very good look ...This example has employed the best exotic woods in its construction, The top looks to be solid no seam edge showing at sound hole some pick wear and looks solid, the sides & back also look the same on the inside and outside grain matches so again it looks to be solid?.... A high grade mahogany neck, Sitka spruce top, Choice Indian Rosewood sides & back, and what seems to be a beautiful Rich Chocolate brown Brazilian Jacaranda Rosewood fretboard with gorgeous abalone, frets show some wear lower several yet plays excellently all the way up with very good action and fast & plays easily...Neck width is a nice slim-med super comfortable 1-3/4" at the nut with no buzzing all the way up action is good set at 5/32nds @ 12th fret. This guitar has been well played and well taken care of and is a good professional grade instrument ready to record tonight. Cosmetically this is a 8.5 out of 10, A real vintage player that has not been abused at all yet has been lovingly well played its tone has richly mellowed with the years and only improved with its age and now after 30 years it shows this wonderful patina that can not be replicated that only comes with age, vintage is not for everyone some like it new we understand that this vintage Martin Copy Japanese Guitar however is not new or is it in mint condition yet it is very beautiful in vintage terms of mellowing with age and patina Wow this is for the TRUE VINTAGE LOVER... also you Ibanez Collectors of Japanese vintage. Its Sound is second to none it has nicely articulate lows with nicely contrasting bright highs and the mid-range has a good punch and ring when finger picked, full on sweet big tone when strumming open cords. This one is a real pleasure to play and is EZ on the eyes too. These are really great old classic guitars and are getting very difficult to find now in anywhere near this kind of vintage condition...its all original and the original tuners work very well with no need to change them out they are keeping the guitar tuned well...no cracks or repairs non needed , excellent original neck set and angle, intonation is good. This Rare beauty is conservatively JVG condition rated at very good - excellent in a 30 year old Vintage guitar...amazing looks and tone & playability in a real vintage collectible that your not going to want to put down.. Every bit as good as the much more expensive Martin for a fraction of that. Any questions ask? gr8bids@comcast.net .
Bobby Jo is number one on this list. Every artist has unknowingly been influenced by him. Starting in the Mississippi Delta, Johnson’s life is rife with myths, and allegory. His deal with the devil and death are full of folklore and mysticism, and it only adds to his haunting voice and groundbreaking guitar playing. His songs are just a pure expression of emotion with no bars held. He led the groundwork for early blues to be filled in and worked upon by all the artists on this list. He also worked on breaking down social barriers. A black man in the early 20th century was not exactly the best place to be. But his music was to add interest by white musicians and help the civil movements of the sixties. Politically or musically, Robert Johnson is deserving of number one on this list.
As the first blues guitarist to pick up an electric guitar and play single-string solos in the late Thirties, T-Bone Walker didn’t just lay down the foundation for electric blues and rock and roll—he also built the first three or four floors. John Lee Hooker credits T-Bone Walker with making the electric guitar popular, claiming that everybody tried to copy T-Bone’s sound.
Eight-string electric guitars are rare but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars. The largest manufacturer of eight- to 14-string instruments is Warr Guitars. Their models are used by Trey Gunn (ex King Crimson), who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars, and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the seventh and eighth strings. Stephen Carpenter of Deftones also switched from a seven-string to an eight-string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK, which is the first mass-produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.

As such, a velocity-sensitive MIDI keyboard is a must here, and the more experience you have with string instruments, the more you will get out of this VST. It's knowing things like how the string all have different weight and tension behind them and how the volume changes when a plectrum thwacks against the strings that will give guitarists the edge here.
Excellent condition Traveling Wilbury's solid body electric guitar. Each Gretsch TW-100T is unique in it's graphics. Featuring a solid maple neck and an ebony colored finger board w/ dot inlays and no fret wear. Fully adjustable "Strat-style" tremolo / bridge including whammy bar. One single coil pickup and a volume control. Only the most minor of wear to the finish.
Amongst the best guitar brands in India for acoustic guitars, Martin is one that stands out. Martin is one of the best known brands for its steel-string guitars. It is a leading manufacturer of flat top guitars which produce top notch sound quality. However, the company is best known for their signature dreadnought acoustic guitar with X-bracing. It is truly one of the best guitar brands for some of the best quality guitars in the market.
“It was just a different world,” Ford says. “There was ‘Don Kirshner’s Rock Concert,’ Ed Sullivan, Dick Clark, and they would have one band on and you would wait all week to see who that band was going to be. And you could talk about it all week long with your friends — ‘Saturday night, Deep Purple’s going to be on, what are they going to play?’ — and then everybody’s around the TV like you’re watching a football game.”
Two-handed tapping was the hoariest of heavy-metal clichés until Marnie Stern reclaimed the concept on behalf of indie-prog bedroom shredders everywhere. No one would ever confuse Stern’s chops with Eddie Van Halen’s, but that’s kind of the point: If Stern’s shredding exudes the agreeably skewed internal logic of the self-taught, it also allows her to utilize the two-handed technique far more creatively than the pseudo-classical chest-puffing that usually comes with Dokken territory.
A record store owner named Leo Mintz explained his observation to his friend, DJ Alan Freed.  Freed had a popular show on WJW in Cleveland Ohio and loved finding and playing new music to his large audience. Mintz told him of a new trend he saw in his record store where many teenagers from white families were coming in and buying Rhythm and Blues records.
Clock maker Matthias Hohner began crafting harmonicas in 1857, assisted by his wife and a single employee. 650 were made in the first year.[1] Hohner harmonicas quickly became popular, and in his lifetime Matthias built the largest harmonica factory in the world.[2] During the American Civil War, Matthias Hohner distributed harmonicas to family members in the United States who in turn gave them to the soldiers.[3]
Lower-priced amps may have a preamp out. While this signal can be plugged into a mixing board, it is preferable to use a DI output for this purpose because a preamp out is a 1/4" unbalanced signal. Unbalanced signals are more prone to unwanted hum and noise. Bass amps intended for use by professional players may have an XLR DI output so that the amp can be connected directly to a mixing board of a PA system or recording set-up. Some bass amps have a 1/4" headphone out jack, so that the bass amp can be used for silent practice. When the headphone is plugged in, the amplifier to the speaker is normally automatically turned off. Higher-priced amps designed for professionals often have "preamp out" and "power amp in" jacks, which can be used to make an effects loop. The power amp in jack can also be used to plug in an external preamplifier pedal, which would then bypass the amp's onboard preamp and EQ section.
Giannini guitars were (and are) made by the Tranquilo Giannini S.A. factory, Carlos Weber 124, Sao Paolo, Brazil. They are generally known for being well-made instruments featuring very fancy Brazilian hardwood veneers, as well as for the strange-shaped asymmetrical CraViola models. Probably the most famous, indeed, perhaps only famous, endorser of Giannini guitars was José Feliciano. No reference materials were available on the early Giannini guitars. A catalog from 1971 is available, with a snapshot of the line that probably goes back at least a decade, and certainly forward.
There’s plenty of substance under all that style, too. Two DiMarzio-designed Fusion Edge humbuckers power the S series axe—they aren’t exactly after-market pickups, but are designed in collaboration between Ibanez and the pickup brand. These ceramic humbuckers are aggressive, articulate and loud, ideal for modern metal. And for a touch more versatility, both pickups have also been coil-split.
An acoustic-electric guitar has an electronic pickup that’s usually built into its bridge. This pickup is used to capture the sounds produced by the top’s vibrations. This is then transmitted via an onboard preamplifier to an external acoustic guitar amplifier or PA system. But plugging-in is strictly optional. Unplugged, an acoustic-electric guitar typically sounds just like a fully-acoustic guitar.
Little-known manufacturer from Osaka, Japan, this company is responsible for the oddly named John Bennet badge. Nakai has been mentioned as a possible Matusmoto Musical Instruments Association member in the past. The company still exists and is producing musical instruments, quite a feat in light of so many manufacturers who faded after the golden electric guitar age.
This thing has taken quite a rap from what I've seen. People griping about it not being as good as the previous model. I don't know much about the other model, I didn't have one. So, I'm unbiased. I've had tons of peddles, singles and multi fx. I absolutely love this! I've been playing for over 20 years on stage. I'm a worship leader at a big Church. This is great for replacing my single peddles. I thought it was very comparable in sound. I use it through an American Peavey classic 30 with an English Celestian speaker. It rocks, period. I think the sound quality is great. I don't need tons of options. I hate too many. I like have the excellent fewer options. They are great! I love how easy it is, I had it figured out right away. I've used both. On stage and studio. This is ... full review
I have been watching Marty, subscribe to many, but found Jonathan Kehew also a very good teacher with longer than most videos and a calm organized presentation . Would like to see what anyone thinks about Swift guitar lessons. I stated using his site as he allows downloads of pdfs of scales and other written material to accompany the videos. He also has three camera in camera closeups of chords and hand position. His appearance clothes, pale skin, open neck shirt, facial hair is a turn off but his content is good I think.
• We'll add EQ to give some polish and let the guitar cut through a little better in a mix. Enable a stage in the standard channel EQ (which comes after the inserts in the signal chain), and choose the Parametric II response. Add a boost of around 4‑5dB at 3.5kHz, with a Q of 0.2.This screen shows the VST Audio Channel Settings and the roster of effects used to create our basic guitar rack.
Claimed to have been invented by guitarist Victor Griffin of Pentagram (who tunes it 1/2 step down).[37] Also used in the song "March of the Fire Ants" by Mastodon, "Rusty Cage" "Holy Water", and "Searching With My Good Eye Closed" by Soundgarden on their Badmotorfinger album, "Cowboy Hat" and some of "Silver Side Up" by Nickelback, "Gasoline", "Shadow on the Sun", "Bring Em Back Alive" and "The Worm" by Audioslave and "Prison Sex" by Tool. Today is the Day have used it on every album since Temple of the Morning Star, Shining use it on most of their album Blackjazz, and Black Label Society used this on much of their early material, often to emulate a 7-string guitar. Used also by Silverchair in the songs "One Way Mule" and "The Lever" from their album "Diorama".
Launch price: $799 / £826 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Pau ferro (rosewood reviewed) | Frets: 21 | Pickups: American Vintage '58 Single-Coil Tele, American Vintage '52 Single-Coil Tele | Controls: Volume (with S-1 Switch), tone | Hardware: 3-saddle American Vintage strings-through-body bridge | Left-handed: No | Finish: Faded Sonic Blue, 3-Color Sunburst
{ "name": "Jetty Black", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Jetty-Black-1500000152031.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "09-22-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152031", "shipToStore": true, "displaySku": "K47863000001000", "displayId": "1500000152031   POS #: 113861025", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/California-Redondo-Player-Acoustic-Electric-Guitar-Jetty-Black/K47863000001000-00-140x140.jpg", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Jetty Black", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Available Now" } , { "storeName" : "San Marcos", "storeStatus": "Available Now" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } ] }
In terms of the electronics, we are once more faced with a System 66 unit. You get a three-band EQ, a built-in tuner, and a versatile mid-range slider that allows you to really tune those mids to perfection. Overall, if you appreciate a comfortable guitar that sounds good and will take on any stage performance you can dish out, this Yamaha is something to look into.

Busker? If you're a busker, you're better off with an amp that does not require a power supply. The Roland Micro Cube is a great little amp, very popular with buskers who require amplification due to its portability, cheap price and the fact it can be powered by batteries! It's pretty loud, too! Here's a great blog on some of the best amps for busking.
While other Univox brand amps may have existed during this period, these are the only ones on our radar scope. The brand was still being put on amps as late as 1976, and all of the later amps were still in a 1980 binder, though by ’79 only two Univox amps were listed in the price list. Most likely, when the Univox guitars went away in ’77 or ’78, so did the Univox amps, but supplies probably continued to be available as late as 1980. Anyhow, this sets the stage for the next development in amps to which we’ll come back…
@Carl – Sorry to hear that you are having trouble. I am not clear on why this would be happening from the info you have provided. Can you please shoot us an email with details on the input and output connections and how each pedal is being powered when you experience this problem? Also, please also include a video that clearly shows this behavior, your connections, and how each pedal is being powered so that we have a better understanding of what you are experiencing. support@strymon.net

The Blueridge BR-160 Historic Series dreadnought features classic vintage styling with modern improvements. For its Historic Series, Blueridge took inspiration from guitars made before the Second World War. However, instead of using the rarer and restricted woods such as Brazilian rosewood used in vintage guitars, Blueridge opted to use more abundant tonewoods that produce the same sound quality.
Flanger effects simulate the studio trick of repeatedly putting your thumb on a tape recorder’s reel for a second and then letting the reel (and music’s pitch) catch back up while a dry (unaffected) signal plays alongside. Flangers usually have a depth setting, which controls the intensity of the effect, and a rate control that adjusts the speed of the cycles.
Well, that’s not exactly what he said. Although, it would seem that way, if you take time to browse the company's Facebook photos. Every guitar the company makes is truly enticing and a work of art. Moreover, the quality of each instrument is astoundingly good. Take the Xuul Katan VI. While the guitar is certainly unique, it also boasts a strong specs list:

This is normally when I tell you about a crowdfunding campaign, but there isn't one currently running for this device, so if you're interested in getting a ToneWood-Amp when it's launched, sign up at their website to register for pre-ordering. There is no commitment to buy one for signing up, but if you sign up now, you can then order one at half-price ($90) when the pre-order campaign goes live (mid-October).
PRS recently started using quite an old idea (first suggested to us by guitar/amp technician Brinsley Schwarz). You simply add, in series, a resistor between the pickup ‘tap’ wire and ground. This mod, “doesn’t completely cancel the slug coil,” explains Smith, “it sort of three-quarters coil cancels. It allows some of the other [slug] coil through. It’s also slightly hum- cancelling.”
Many readers will already know that germanium has been the effects buzzword of the past many years. These transistors are considered softer, rounder, more musical. Don’t be fooled: that doesn’t mean they make music all by themselves, you have to make music through them. But that’s not such a bad thing. Open up a Fuzz Face for the first time and you’re likely to be startled by its simplicity, and other early fuzzes like Maestro’s Fuzz-Tone (1963) and Sola Sound’s Tone Bender (1965) are equally basic. As far as the Face goes, you’ll find fewer than ten components on the board, two of them being those crucial AC128 or NKT275 transistors. Interestingly, the Tone Bender originally used two OC75 germanium transistors made by Mullard, the revered British tube manufacturer.
Pickguards were white pearloid, or sometimes tortoiseshell, the neck used a string tree, and the all-around makeup of the guitar was bigger than later iterations — thicker necks, bigger and heavier bodies, larger fret markers. One obvious differentiator is the logo on the headstock; the earlier models, and even a few released as they moved into Phase Two, had a raised plastic “Univox” logo on the headstock.
Ok I know Hondo? .... But this is a good one folks its got a lot going for it really have a closer look, its actually built well it is a beautiful vintage guitar in its own right its condition and patina good looks good sound and easy playability make it an excellent entry or back up choice into vintage guitars, The Top appears to be solid 2 piece center seam spruce top you see grain going from top to bottom with really beautiful straight grain with flame type figuring that is surprising on a Hondo it's unique in that feature and it has that patina I love it caught my eye big time as I got close I couldn't believe it was a Hondo, it's logo has that same font as old Martin & Takamine used this one has the look and feel, but it's action was a little off spec , so I fixed all that it has great action now it's neck set and angle was excellent and I ended up changing its nut & saddle out for Martin born nut & saddle set and a new set of 80/20 strings, this guitar has good volume and sweet tone it rings clear and true with good intonation. It's in very good to excellent vintage condition, it's body & neck has no cracks , no finish checking and still shines like glass it's beautiful just have a look, it's not new or mint it has a couple drinks on its top and a couple on its back too but besides those it's exceptional vintage and plays easy with good low action with plenty of saddle left to lower more down the line of ever needed it's set up to meet or exceed Martin specs for playability. This is a lot of vintage guitar for this kind of price WOW! .
Guitar effects and the boxes that generate them have married theory and practice, history and material, content and form. Such strange logics, inherent to all of these simple devices, radiate sincerity in their transgressive sounds. Or put differently, those “unmistakable sounds,” which can enchant an entire generation, are not entirely intentional, but are born from the accidental collisions between transistors, tubes, wiring, and luck.
In 1968, Jimi Hendrix talked about his love for a Houston blues luminary who wasn't known outside the region: "There's one cat I'm still trying to get across to people. He is really good, one of the best guitarists in the world." Albert Collins, who died of lung cancer in 1993, played with his thumb and forefinger instead of a pick to put a muscular snap into his piercing, trebly solos. His fluid, inventive playing influenced Hendrix, sometimes overtly: Jimi liked Collins' sustain in the song "Collins Shuffle" so much that he used it on "Voodoo Chile."
Okay, it is a single-cut and dates back to a similar era, but this single-cut is very different to a Les Paul. The Pro Jet has a basswood body with an arched maple top, and like many of Gretsch’s solidbody electrics, it’s chambered, making it lighter, and, they say, more resonant. It sports a pair of Gretsch’s Black Top Filter’Tron pickups, giving you a bright snap and twang that’ll cut through any mix. In short, it’s incredible. Uncanny, even. For here we are in 2018, and yet you fret a couple of doublestops on the Pro Jet Electromatic and all of a sudden it’s like you’re the Fonz, just waiting for Richie, Joanie and Chachi to show up. The cleans are sharp and jazzy, but just take your amp into overdrive and you’re in rockabilly heaven. The tone is so hot you could grill hamburgers by wafting it in front of the speaker cone. Tex-mex shuffle, country, blues, jazz, rockabilly... You name it, and it’ll play it, retro-style. if you want the versatility and the kudos that comes with a Gretsch, it’s hard to look past that finish, that build, and that tone.

A tremolo pedal takes your signal and chops it up, making it sound like the volume is dropping and reappearing very quickly. Imagine what it would sound like whilst holding a note and turning the volume down on your amp and back up again and you’ll get the idea. A tremolo allows you to change the speed at which the volume drops happen and how severe the cut off is. You can have it set to completely cut your sound out or just gate it, which allows a certain amount of sound through at each interval. The BOSS TR2 Tremolo is one of our favourites here at PMT.
The origins of the modern guitar are not known with certainty. Some believe it is indigenous to Europe, while others think it is an imported instrument.[32] Guitar-like instruments appear in ancient carvings and statues recovered from Egyptian, Sumerian, and Babylonian civilizations. This means that the contemporary Iranian instruments such as the tanbur and setar are distantly related to the European guitar, as they all derive ultimately from the same ancient origins, but by very different historical routes and influences.
Tablature, or Tab, is a very important tool that allows guitar players to easily learn how to play chords, melodies, and songs. Learning how to read guitar Tab can be a mystery for some newer guitar players. In this guitar lesson, we are going to learn how to read guitar Tabs and go over some of the more common elements you will see when you pull up a Tab for a song you want to learn. Try this lesson if you want to learn how to read guitar sheet music.
Thanks for popping in! Yeah, that g-string issue's a real pain. I also get it on acoustics for the same reason. I've found that, aside from sloping the slot DOWN on the peghead side, if you also try to provide a gentle (side) edge where it starts to head towards the g tuner, that helps too. What I'm trying to say is that you should try to give as clear a path as possible to the tuner to reduce interference/friction. I've tried to illustrate what I mean here: https://lh3.googleusercontent.com/-_9c955WEOiM/UI8xvC_nvFI/AAAAAAAADAA/RQmXf_beWUc/s754/nut-slots.jpg but let me know if it's not clear. More on making a nut here, by the way: http://diystrat.blogspot.tw/2010/10/making-bone-nut-from-scratch.html
by pedalhaven Black & white board from  @alexjacob_ ! Here’s the signal chain: Boss TU-3 Chromatic Tuner EarthQuaker Devices Palisades Boss NS-2 Noise Suppressor Hotone Nano Legacy BritWind (Effects Loop) Boss NS-2 Noise Suppressor Joyo D-SEED Digital Delay TC Electronic Arena Reverb Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 
It is typically not possible to combine high efficiency (especially at low frequencies) with compact enclosure size and adequate low frequency response. Bass cabinet designers can, for the most part, choose only two of the three parameters when designing a speaker system. So, for example, if extended low-frequency performance and small cabinet size are important, one must accept low efficiency.[24] This rule of thumb is sometimes called Hofmann's Iron Law (after J.A. Hofmann, the "H" in KLH).[25][26] Bass cabinet designers must work within these trade-offs. In general, to get extended low-frequency performance, a larger cabinet size is needed. Most bass cabinets are made from wood such as plywood. Gallien-Kruger makes a small extension cab made of aluminum.
The following year the Standard model received a short-lived redesign seeking to reduce production costs and price on American Stratocasters. This revised version lacked a second tone control, a newly designed Freeflyte vibrato system, and a bare-bones output jack. A reshaped ‘Comfort Contour’ body with deeper forearm and waist contours similar to an early 1960s model was introduced. What it did retain was the 1970s-style headstock decal. The 1982/83 version of the Standard Stratocaster has little in common with the Dan Smith guitar, apart from the period when they were sold, but is sometimes informally (and controversially) presented as a “Dan Smith-era” or “redesign” guitar. After the Standard Stratocaster was discontinued in 1984, Fender Japan produced a 22-fret version with a flat 9.5″ radius and medium-jumbo fretwire until 1986.[14]
{ "thumbImageID": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "defaultDisplayName": "Epiphone Tom Delonge Signature ES-333 Semi-Hollow Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Stripe", "sku": "sku:site51273888006950", "price": "599.00", "regularPrice": "599.00", "msrpPrice": "999.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe-1273888006950.gc", "skuImageId": "Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Tom-Delonge-Signature-ES-333-Semi-Hollow-Electric-Guitar-Brown-Stripe/515625000327000-00-60x60.jpg", "imgAlt": "" } ] }
Of course, the effect is not as good as using a professional studio but most users report that reproduction is very good for a simple computer application. The interface of Guitar Rig is extremely well laid out and even for those new to amps and guitar effects, it doesn't take long to navigate your way around. If you intend to use Guitar Rig for live performances, a convenient Live View displays the most essential readouts and level monitors to keep your eye on.
You can think of these pedals like modulation effects that change nothing but the timing. They split up the signal in the same way, but time-based effects don’t usually make any major changes to the copied signal. Instead, they hold it back by a certain length of time before mixing it back in. This makes a few different varieties of pedal possible:
Usually, electric guitars have six metallic strings – although there are certain variants used in specific musical styles with seven or even a dozen strings (six pairs). This kind of guitar is used in all kinds of musical styles, from jazz, to metal, pop... and of course Rock'n'Roll music. Actually, the origins of the electric guitar can be traced back to the 1930s Swing-era Jazz movement, when guitarists started experimenting with steel pickups adapted to their hollow-bodied instruments, as a way to get a louder, more substantial sound than what would be possible from a regular guitar. The first commercial electric guitars came up in the mid 1940s, and by then a solid-body was already in use – thus introducing the much familiar look that's now typically associated with electric guitars.
This is an echo effect – every time you play a note it is repeated quieter and quieter, just like an echo. You can get a variety of different delay effects, from old-school “tape” echoes which are said to sound more natural, to analogue delay pedals and more modern digital ones. Digital pedals tend to sound clearer and a little harsher than their analogue cousins, making them more suited to modern styles such as modern metal.
The new generation of ‘boomers’ as they were known, thrived with the growing push on consumerism.  This of course included buying records and with the pin ups of Rock and Roll like Elvis and Chuck Berry – they felt part of a new movement which understood them and related to their struggles, such as growing pains, responsibilities and fitting in with society.
Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.
This tonewood isn’t a very common wood used. But, when it is used on a solid-body guitar, you’re definitely going to have access to deeper, richer, and woodier tones. However, pair it with a Cedar top and you can have bright and warm overtones. Paired with a Spruce top, you can play to get an aggressive bite on the trebles with a definite presence on the low end.

The electric guitar was essentially born in 1929—long before the advent of rock and roll music. The first commercially advertised electric guitar was offered that year by the Stromberg-Voisinet company of Chicago, though it was not a smash hit. The first commercially successful electric, Rickenbacker’s “Frying Pan” guitar, didn’t kick off rock ’n’ roll yet either, but it did inspire competitors to jump into the electric guitar market. Invented in 1931, the Frying Pan had an electromagnetic pickup made out of a pair of horseshoe magnets placed end-to-end to create an oval around the guitar’s strings, with a coil placed underneath the strings. The pickup, a device that converts the strings’ vibrations into electrical signals that can be amplified, was bulky and unattractive, but it worked. The commercial version of the Frying Pan was a hollow cast-aluminum lap-steel guitar, and wasn’t an immediate hit beyond some Hawaiian, country, and blues musicians. It differs from the traditional Spanish-style guitar in that it is played horizontally, on a stand or in the player’s lap, and has a sliding steel bar that can be moved along the frets for a gliding effect.
The JEM70V is a Steve Vai signature model based on early JEMs he helped create. It comes with 3 different DiMarzio Evolution pickups that were handpicked by Steve Vai himself to give him the various tones that he needs for his expressive solo work, and intricate rhythm textures. The body is crafted from basswood, while the low profile 5-pc Maple/Walnut and 24-fret, 25.5" scale length rosewood fingerboard provide the fast playability expected of the brand. Other features include the Edge tremolo, 1.69" nut width, tree of life inlay, and it comes wrapped in Seafoam green finish.
If you have been playing for a year or two and are looking at something to replace your current model, it would be wise to save a little more and go for a mid-range guitar that may cost between $300 and $500. On this kind of guitar you’ll notice a big difference in sound, as well as the feel of the instrument and the overall playability. Use this page as a starting point to find something that may suit you. Until then, you are probably best off sticking with your current guitar.

Whether you play classical folk or modern metal, it doesn't matter. There is an amplifier to suit the needs of your music and your bandmates. All you need to do is take a moment to determine which features you need and you'll have plenty of amazing options to choose from. If you're just having a browse or aren't entirely sure where to begin your search for an amplifier, you'll almost certainly be best served by checking out our top sellers. An option such as the Fender '68 Custom Deluxe Reverb 22W 1x12 Tube Guitar Combo Amp with Celestion G12V-70 Speaker, for example, might be just what Doctor Rock ordered. This amp is small, yet powerful, and absolutely loaded with tone. Both of its channels boast reverb and tremolo, and, best of all, the "custom" channel features a modified Bassman tone stack, allowing for even more flexibility when you plug in and play.


In 1972, Ovation introduced one of the first production solid-body electric-guitars with active electronics, the Ovation Breadwinner. The model failed to gain widespread popularity, however, and production of the Breadwinner and the Ovation Deacon ceased in 1980. Ovation made several other solid-body models up until the mid 1980s.[28] Since that time the company’s main focus has been acoustic and acoustic-electric guitars.
While many players revere the original analog effects boxes and their modern reissues, the majority of effects on the market today have digital circuitry. Don't let that be a deterrent, digital effects are so advanced now that many of them can only be distinguished from analog effects by certified tone geeks. Professionals at all levels use digital effects. There are advantages to both analog and digital stomps, and either can be the right option depending on the player and the music.
Some people just need to play loud. It’s all they know and it’s all they want to know. If that’s the case, you might want to invest in some acoustic foam, and begin to soundproof your practice space. This will not only keep the sound level to a minimum for people in the other rooms, it will also represent the first step in transforming your space into a legitimate in-home studio.
Ostentatious Delays: If you're making very rhythmic music of any kind, it makes sense to use tempo-sync'd delays, to avoid undermining the main pulse. However, simple tempo-sync'ed delays tend to be masked by the main rhythmic stresses, so they sink into the background of the mix unless mixed very high in level, which makes it difficult to create ostentatious delay effects in rhythmic music without swamping your mix. One solution to this problem, very common in trance music, is to set a delay to a three-16th-note duration, which means that although the delay repeats never step outside the 16th-note grid, they'll often miss the main beats and therefore remain clearly audible. Mike Senior
The product also has an original feature, called ISF, advertised to “give you infinite sound possibilities, from the USA to the UK” by using pre-set bass, mid, and treble setting that the user can select between. Some customers remarked that the feature doesn’t seem to make much of a difference, but praise the tone quality and good functionality of the product nevertheless.  
Back when they were starting, Jackson guitars were only available to the elite few, mostly heavy metal artists. After being acquired by Fender, Jackson has since expanded into the entry level realm with mass produced versions of their popular guitar designs, including the Dinky shape. The JS11 Dinky does just that, making the Jackson Dinky a beginner and student friendly instrument that more players can enjoy.
In regards to which is best I personally think you pretty much got it right! Folks can piss n moan all they want but the facts are facts. Gibson, Fender, PRS ect all make fantastic guitars, time-tested tools of the trade. Many of you feel the need to want to publicly put down a certain brand in favor of another, there's good n bad in all of them!! If I could afford a Gibson Les Paul I would get one! Sure I could pull out the plastic n get one but I don't wanna have to do that just yet. I have no shame in purchasing a cheap guitar as long as I like it, to me if a guitar has a good smooth fast neck ......... it's a good guitar!! You can always swap pups n hardware but the neck is a little more complicated. I have a Fender Squire Strat, it is an "E" series Squire, I think it was made from 1984-87, and I can tell you that I will be 50 years old in May of this year and the neck on this Squire is the best I have ever felt on any guitar I have owned!! and yes it was a fairly cheap guitar. Now I hear that the "E" series of Squire Strats are supposed to be highly sought after or something, I don't know all about that, all I know is that I love the way this guitar plays n feels in my hands n riding in front of my belly! So folks don't put a guitar down simply because you can't afford it, like I said they are good guitars for a reason, same goes for the cheap guitars, don't knock 'em 'til you try 'em, there are some mighty good players out there to be had for cheap $$$, bottom line ..... regardless of the name on the head ..... if you can afford it, if it feels n looks the way you like n has a good neck then buy it n give it the love it deserves, it'll love you back in ways you never imagined!! Happy pickin n God bless
BYO takes pride in providing you with a BETTER guitar kit. We have worked with our supplier for many years, making sure we provide our customers with the highest quality products. We have our kit manufactured to our specifications and we have been providing guitar kits to builders for over a decade! We inspect each kit before we ship, checking for great neck fit, and making sure there are no problems with the body and neck. We repackage the all the hardware and electronics, putting all the correct screws with the correct parts and making sure you get ALL the parts for your kit. We don't just re-sell kits, we also have a custom shop where we make USA made guitar kits. We use this know-how to make sure our imported kits are of a higher quality and will give you a great experience and a great guitar. If by chance we miss anything, we are happy to replace, repair, exchange or refund. We have also written clear, easy to understand, step by step instructions that will make building your guitar a breeze, but if you have any questions, we are happy to answer any questions you may have along the way.
Now you might be thinking that if you already have amp controls these aren’t worth getting – you’d be wrong. Put every control high up and you have a very effective volume boost for solos at the press of a footswitch. Change the settings around and you can access an entirely different tone immediately, simply because of a shift in EQ. For instance, you could go from a bass-heavy tone for one part of a song to a louder, more trebly tone for another part. The possibilities with EQ pedals are vast, especially if you like to change the character of your tone mid-song.

The Vintage El Dorado Leather Guitar Strap is meticulously hand-tooled in traditional Western motifs by leather artisans with decades of experience. Each strap is an individual and unique work of craftsmanship that you'll be proud to display on your guitar. The designs date back to late 19th century Western leatherwork, used extensively in the decoration of saddles, saddlebags, belts and holsters.

{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: multi effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"multi effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: multi effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category2"}
First, we decided that we're going to limit this guide to floor-based multi-effects units, and we also deliberately included only those with different effect types/blocks. After looking at currently available units, we ended up adding a total of 24 multi-effects pedals to our database. All relevant reviews, ratings, forum discussions, and expert opinions were fed into the Gearank algorithm, which gave us the scores that we used to narrow down the list to just the top 10 - over 5,200 sources were analyzed during this process. We then listed each of them with important specifications and features, along with noteworthy feedback from actual users and expert reviewers. Finally, we decided to make a divide the list into two categories: compact multi-effects pedals (since many are looking for them), and medium to large size ones. For more information about this process see How Gearank Works.
It obviously wasn’t ideal for guitarists to permanently damage their amplifiers for the benefit of experimental tone. Nor was it practical for them to drag immovably large objects on tours. Luckily, increasing experimentation in guitar sound modification collided with the widespread manufacture of electronic transistors in the early 1960s, which replaced vacuum tubes and integrated synthetic distortion in amplifiers. As the transistor revolutionized computing, it also dramatically simplified the production of guitar effects and amplifiers, allowing compact design and portability with little overheating.
The body of the instrument is a major determinant of the overall sound variety for acoustic guitars. The guitar top, or soundboard, is a finely crafted and engineered element often made of spruce, red cedar, redwood or mahogany. This thin (often 2 or 3 mm thick) piece of wood, strengthened by different types of internal bracing, is considered the most prominent factor in determining the sound quality of a guitar. The majority of the sound is caused by vibration of the guitar top as the energy of the vibrating strings is transferred to it. Different patterns of wood bracing have been used through the years by luthiers (Torres, Hauser, Ramírez, Fleta, and C.F. Martin being among the most influential designers of their times); to not only strengthen the top against collapsing under the tremendous stress exerted by the tensioned strings, but also to affect the resonation of the top. Some contemporary guitar makers have introduced new construction concepts such as "double-top" consisting of two extra-thin wooden plates separated by Nomex, or carbon-fiber reinforced lattice - pattern bracing. The back and sides are made out of a variety of woods such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is chosen for its aesthetic effect and structural strength, and such choice can also play a significant role in determining the instrument's timbre. These are also strengthened with internal bracing, and decorated with inlays and purfling.
The use of two or more mics is likely to result in other phase issues when these mics are combined in the mix, since they will almost certainly be capturing sound waves that reach the mic capsules at slightly different times. Whether such issues are bad enough to cause a problem (or even be heard) depends on the situation. First, if your two mics sound odd and hollow and/or lacking in low-end from the outset, flip the phase of one (usually via a switch on the preamp or afterward in your DAW) to ensure you aren’t trying to blend two mics that are reverse-phase in the first place. If your two-mic sound goes from hollow and thin sounding to fat and full, you had a reverse-phase issue. If it doesn’t improve – or gets worse – you need to consider other remedies. Once you know that both mics are at least in phase with each other, you can improve their phase relationship even further by moving the position of one around until any other sonic oddities are less obtrusive, which is simply determined by finding a pair of positions that are really smoking tone-wise.
It depends on what you call important. Does an electric guitar's tonewood affect the tone? No. Sorry. When the thing capturing the sound is directly under the thing generating the sound and, it makes no sense for the wood, which vibrates in a secondary fashion, to have any effect on a tone that has already left the guitar. Think of it in layers, like this:

Yamaha is known for focusing, in modern years, on band instruments. But at one point in their tenure in the early 90s, they owned a good share of the student model market with their beautiful Pacifica line. Thankfully, in the past few years, they’ve reintroduced mass runs of this guitar, and it is a great option for a first-time guitar player. Why? Well if you ask any older player who once started on a Pacifica, most of them will tell you that they still have it in their collection somewhere, both for sentimental value, and because it’s built like a tank and plays well.
Package arrived in a timely manner and in good shape. Guitar is alright, built to look like a high-end model but closer inspection proves otherwise. I was fine with that but then had to remove the rear cover of the amp to reconnect a power wire that had become disconnected during shipping just to get power to the amp. After that I still had no sound through the amplifier. I checked the amp and cable with another guitar and all worked fine. That lead me to replace the guitar battery that came with the unit with a brand new one and the problem still persisted. After destringing the instrument and checking the interior connections I am convinced that the issue is in the pickup under the bridge or in the onboard electronics. Hopefully the replacement will work better but buyers should be cautious when ordering this product. The guitar really is beautiful for the price but certain quality control issues leave me wondering, especially once the Amazon product support expires on it.
{ "thumbImageID": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000", "defaultDisplayName": "Fender American Professional Precision Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030634", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-V-Maple-Fingerboard-Black-1500000030634.gc", "skuImageId": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Black/J46466000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Precision-Bass-V-Maple-Fingerboard-Black/J46466000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030635", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive-1500000030635.gc", "skuImageId": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000-00-60x60.jpg", "imgAlt": "" } ] }
Solid state amps have many advantages: they are cheaper, lighter, and require less care than a valve amps (which eventually will need new valves, for instance!). Vox, Line 6 and Hiwatt make really good solid state amps that you can gig with without worries. They are not necessarily "worse" amps. The Rolling Stones, Status Quo and many other big acts have used solid-state amps at some point. They're also quite popular with jazz guitarists.

Establishing a guitar school in New York requires competing with the highest concentration of possible distractions. This book follows a step-by-step method for identifying the essentials, but also details practice plans and highlights how to practice. Everyone will keep shouting about how you’ll need to practice hours upon hours a day to become even a serviceable guitarist, but advice on just how will be scarce. I took lessons for years and even I don’t remember how my teacher told me to practice. This book will lead you through a progression from the absolute basics to complicated song construction. My only quibble with this book is that it suggests that A minor is the saddest chord, when it is, in fact, D minor.
Not the first commercially available flanger pedal, but probably the first that really worked properly with the full sonic depth of the effect, the A/DA Flanger was made possible by the advent of the SAD1024 chip (others were used through its lifetime, depending upon availability). It hit the shelves in 1977, and was shortly followed by Electro-Harmonix’s equally beloved Electric Mistress, and MXR’s big, gray Flanger. Nearly every big maker slapped its own flanger on the butt and sent it toddling down the pike within the next few years. These were serious pedals in their day, the big boys requiring their own regulated onboard AC power stage to run all that thirsty silicon. Most required a serious investment on behalf of the impoverished guitarist, too. A/DA’s unit retailed at $199.95 when introduced, and others went for even more. Not a steal, when you consider that minimum wage was $2.30 an hour in 1977.
Petros Guitars are an elite customized acoustic guitar luthier, formed by the Petros brothers, Bruce and Matt Petros, based in Kaukauna, Wisconsin. They are noted for their exceptionally high quality craftsmanship and often make guitars similar in appearance to Spanish Baroque guitars with the design, making both steel and nylon string hand-made guitars. Bruce began making guitars in 1972, and in 2000 he was joined by his brother to form the Petros company.[
There sure are a lot of electric guitar options to choose from in this day and age. Thankfully, your choice doesn't have to be a difficult one to make thanks to world-leading guitar companies like Epiphone. In fact, Epiphone specializes in a wide range of electric guitar value packages, assembled specifically to help budding enthusiasts begin their musical journey on the right foot. If learning how to play the guitar is something you've always wanted to try but were never sure where to start, consider this section your launching pad.

Free to use schematics to get started can be had from the web but remember, if you are going to use someone else’s work, either completely or as a starting point for your own design, check first to see what copyright and any other terms are associated with it. If it’s not clear, ask first. There are plenty of open source designs available to use, but schematics, like other written works are covered by copyright law so check you have permission before using them.

Pre-1929: All size 1 and larger guitars, from any year, have 6" long pyramid bridges. All size 2 or 2 1/2 Martins have 5 3/4" to 5 7/8" long pyramid bridges. Most pyramid bridges before 1900 are roughly 7/8" wide, and most after 1900 are 1" wide. The average length of the wings on most pyramid bridges is roughly 1 3/8" During the 1880's and 1890's, however, there is more variation, as much as from 1 1/4" to 1 1/2" On the earlier 7/8" wide bridges, the wings have a very long, narrow, elegant appearance, with a gentle curve to the inside angles of the pyramids, that looks nothing at all like the harsh angles found on many copies. There is no difference between the dimensions of ivory and ebony bridges from the same period.


Since they entered the electric market, it didn't take long before Ibanez became the patron saint of those who appreciate a heavier sound. Their RG series won the hearts and minds of budget crowds all around the world, mainly due to its great tone and overall performance. Today we are looking at an Ibanez RG421, which follows this core policy precisely.
If you're in a small, unsigned band, it's very important to choose an amp that's loud enough - as not every venue will mic your amp. Ironically, bigger artists don't need to worry about this, since they are safe in the knowledge they'll always have a good sound and their amps will always be mic'ed. That's why Seasick Steve plays a small Roland Cube amp, but it's not necessarily a great choice if you're in a band who plays live.

It’s also worth noting that Fender guitars are typically available with a few different pickup combinations. I’d especially recommend checking out a HSS Stratocaster for rock music. The humbucker in the bridge position gives you a thicker, hotter sound, but you still have all that great Strat tone in the from the neck and middle pickups. I’ve played a Standard HSS Strat for over a decade and it’s one of my favorite guitars.


The key to capturing any kind of ambient tracks is a good reverberant space, although a narrow or dead room can also work, as long as there is sufficient distance between the guitarist and the amp. I usually put the air mic at least ten feet from the amp, positioned off-axis, or in an omnidirectional pattern to pick up as much reflected sound as possible. Placing a baffle between the guitarist and the amp will increase the apparent room size, as will making the amp sound pass through a doorway or turn a corner into another room.
The Super Chromonica 270 Deluxe is an updated improvement on the Super Chromonica, featuring tighter reedplate fixtures, thicker reedplates, round holes in its chrome-plated mouthpiece, a smoother slide mechanism which can be remounted for left-handed use, and a round-edged comb for more comfortable holding.[36] The Deluxe is also available with a gold-plated mouthpiece and coverplates, known as the Super Chromonica Gold.[37]

Note: For additional information and history on Ibanez guitars, please check Wikipedia. For a great overall resource for Ibanez guitar questions, check out the Ibanez Collectors World website. The ICW is a gathering of Ibanez collectors who relish in the challenge of not just collecting Ibanez guitars, but of identifying old models, dating guitars by serial numbers, and generally watching the vintage guitar marketplace to understand how interest in Ibanez guitars is evolving.
Two new 325s were created for Lennon and were shipped to him while The Beatles were in Miami Beach, Florida, on the same 1964 visit to the US: a one-off custom 12-string 325 model and an updated six-string model with modified electronics and vibrato. He used this newer 6-string model on The Beatles’ sequentially “second” appearance on The Ed Sullivan Show.[7]
Some pedals, such as clean boost pedals and transparent overdrive pedals merely provide a much powerful signal to feed into the preamp section of the amp, causing natural overdrive. Overdrive pedals can provide both a boosted signal and an already distorted signal. Distortion pedals have different kinds of circuits that provide different kinds of distortion; the pedal provides an already distorted signal. Digital overdrives and distortions rely on electronic means of producing the signals, with some resorting to modeled sounds.
The problem of the recent Gibson bashing is well-founded. There were quality issues over the last maybe 15 years. The thing is that a Gibson is still a dream for a lot of people. They get better and giving themselves a present after putting money away. Then, after several years, maybe decades of anticipation they get crappy quality for several thousand dollars. The brand is alive, they can bounce back, but the managment...instead of the elevator, they should take the japanese business shortcut. As soon as the quality and passion is back, people will love to buy one. Hope they'll get back on track before 2020. - MountainGoat
To make a long story short, I ordered from Amazon two Epiphone EJ-200SCE guitars, Color: one Natural, one Black and the Hummingbird Ephiphone. My wife liked the black one. I liked the natural one. We decided to compare the two side by side, and sent for both of them. Later, my wife changed her mind and liked the way the natural looked and sounded. I had just listened to the Andertons review "What ones are the best, the ten times more expensive J 200 Gibson or the ten times more expensive Hummingbird Gibson comparing to the similar Epiphone EJ-200SCE and the Hummingbird Epiphone.
As auto wahs, envelope followers, and other dynamically controlled filter effects respond to your attack, you don’t want to limit dynamics with compressors and/or distortion pedals that reduce dynamic range. Most players also put wah pedals first in the signal chain—mostly to come before distortion effects—however Tom Morello is a notable exception.
Once The Beatles became tied to Vox amplifiers (a deal was struck early in their recording career whereby they would be provided Vox equipment for exclusive stage use), the quest for more power began. John Lennon's first Vox was a fawn-coloured twin-speaker AC15, while George Harrison's was a fawn AC30 with a top boost unit installed in the rear panel. They were later provided with twin black-covered AC30s with the rear panel top boost units. Paul McCartney was provided with one of the first transistorised amplifiers, the infamous T60, which featured an unusual separate cabinet outfitted with a 12" and a 15" speaker. The T60 head had a tendency to overheat, and McCartney's was no exception, so he was then provided with an AC30 head which powered the T60's separate speaker cabinet.
Jump up ^ Wright, Michael. "Jack Westheimer — Pioneer of Global Guitarmaking". Vintage Gutiar (July 1999). In August ’69, the Valco/Kay assets were auctioned off and W.M.I. purchased the rights to the Kay brand name. W.M.I. began to slowly transition Teisco del Rey guitars to the Kay brand name, which gave them greater credibility with dealers. This change was completed by around ’73 and the Teisco del Rey name then disappeared. This explains why you will occasionally see a Teisco guitar with a Kay logo.
{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars: supro","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] used"}
I then surveyed Amazon, Sweetwater, Musician’s Friend, and other online musical instrument vendors to see what was available. Having found several promising models priced below $200, I decided to set this as our price ceiling. By setting a $200 ceiling, we’re not saying that more-expensive models aren’t worth paying extra for—only that the models we recommend here are more than adequate to get a beginner off to a great start.
This website is not affiliated with the Samick Musical Instrument Mfg. Company in any way. We do not deal in the buying or selling of instruments of any kind, nor do we offer evaluation services for your instruments. Most prices listed are MSRP, taken from catalogs and price lists, and have not been adjusted for inflation (unless specified) and do not reflect the actual street value a model may have sold at. More on prices here: MSRP.
Starting to learn on an electric guitar can be much easier as compared to an acoustic guitar. Electric guitars chords are easier to hold down as the width of the neck is shorter. The strings on the electric guitars are softer than those of acoustic guitars, which is easier on your fingertips if you're just starting out. They can be slightly more expensive than acoustic guitars, especially because other gear is needed to support your playing (i.e. amps, cables, and so on). It's all a matter of personal preference, but here are some of our top choices.
Two full steps down from Drop D. Utilized by bands such as A Day to Remember (on Mr Highway's Thinking About The End, Welcome To The Family, Violence (Enough is Enough), Life Lessons Learned the Hard Way and Sticks and Bricks), In Flames, Hostility, Issues, Static-X, Bring Me the Horizon (since Suicide Season), Hellyeah, Amaranthe, Breaking Benjamin (since Phobia), Parkway Drive, Otep, Spineshank, RED, Bury Your Dead, Eye Empire, Dirge Within, Remembering Never, and occasionally Chevelle, Darkest Hour, Evanescence, 9oz. of Nothing, and For the Fallen Dreams.

Electric guitars are versatile instruments. If you’re not entirely sure where your playing career is headed, pick a Strat-style solid-bodied guitar in a ‘sensible’ colour, and you’ll have an instrument that can do pretty much anything – and one which you won’t be embarrassed to get out of its case when (and if) you get through the ‘death metal’ phase!
One of the most over looked and shockingly good guitars I have ever played in my 23 years of chopping wood. In their rich history there have been little misses, but over all Aria guitars are supreme to their competitor especially at the price point. My 1977 Aria les paul copy has at leased twice the balls as my buddy's 6 year old Gibson and tons more playability. Forget about comparing to epiphone, seriously. eBay yourself a Aria electric and you WILL be pleasantly surprised. Aria acoustics; If your reaching for a nylon, Aria makes some of the best classical guitars with a history of employing some of the most well noted artisans of the craft, such as Ryoji Matsuoka. Fine craftsmanship all around, built with quality woods and have a tendency to get better with age, laminated or not. As for steal strings, I've only played one to be honest, but this Martin 'lawsuit' was a work of art. Thank you.
Also still in the line in ’66 were our old friends, the MJ series. These were essentially unchanged except for a new striped metal guard, the new hooked headstock, and a new chrome-covered oval pickup with an oval indentation stamped in the center and six flat, round poles. Available were the MJ-3L (Teisco Del Rey ET-300), MJ-2L (promoted in Japan, but not the U.S.) and MJ-1 (Teisco Del Rey ET-120). The MJ-1 had a new on/off rocker switch and a second rocker for solo/rhythm. Promoted in Japan, but not the U.S., was the little BS-101 bass, pretty much unchanged from before.
1960's Kay, Model K-1 "SG-Style" Electric Guitar. 1 single coil Pickup. Great, original "see-thru" Mahogany-color finish. Bound fingerboard. Laminated maple neck and laminated Mahogany body. Volume and Tone control and adjustable truss rod. With the exception of some "Battle Scars" on lower bout of body (see photos) the finish and wood in great shape. Plays and sounds great. Stop Tailpiece. Not many finish chips. Very shiny. Frets in great shape with no visible wear. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .011 when fretted at the first and the body) and cleaning and polishing. Plays and sounds great. We also installed a new set of .009 strings.  No case included.
A combination of standard 6 string tuning and a 7th string dropped one full step for power chords, used by deathcore bands such as Suicide Silence, Oceano, and Whitechapel, as well as other bands such as Lacuna Coil, Blotted Science, In This Moment, Chimaira (on Pass Out of Existence and Crown of Phantoms), and occasionally Scar Symmetry, Escape the Fate, King 810, The Devil Wears Prada, Dry Kill Logic, Eldest 11, December In Red, A Fall To Break, and CFO$ on some songs. Triumphant Return guitarist Matti varies this tuning by dropping both the low B to A and low E to D and raising the high B and E a half-step to C and F (A-D-A-D-G-C-F).
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]
×