The Japanese copy juggernaut got off to a fast start, and the second major Univox guitar was the Lucy, a lucite copy of the Ampeg Dan Armstrong, again produced by Arai, introduced in 1970. This guitar had a surprisingly thin bolt-on neck (especially compared to the Ampeg original) and a slightly smaller body. The fingerboard was rosewood with 24 frets and dot inlays. This had a fake rosewood masonite pickguard with volume, tone and three-way select. Like the Ampeg, the Lucy had a Danelectro-style bridge/tailpiece with little rosewood saddle. Unlike the Ampeg – which had Armstrong’s groovy slide-in epoxy-potted pickups – this version had a pair of the chrome/black insert pickups jammed together at the bridge. Other Japanese manufacturers also made copies of the Ampeg lucite guitar, notably carrying the Electra (St. Louis Music) and Ibanez (Elger/Hoshino) brand names, with versions of the slide-in pickups. In ’71, the Univox Lucy (UHS-1) was $275 including case. Just how long the Lucy remained available is unknown, but it probably did not outlive the original and was gone by ’73 or ’74.
Unfortunately there’s not really any good way to get around that issue. You can get strings that ease the pain on your fingers, like Elixirs or D’addarios that are coated but as for the guitar itself you’re going to have to tough it out and build up your callouses and endurance/tolerance. I had the same problem with my fingers, it would happen after playing for longer than an hour usual but over time it went away and now my fingers are rough and hardened. It’s worth the effort and pain, enjoy!
The SG started out as a lighter alternative to the Les Paul - which Les didn't like and eventually opted out of. But what seemed like a failure turned out into a success story because many rock and metal guitar players loved the SG's sharp look, faster neck and comfortable upper fret reach. These days, the SG continues to dominate in the realm of rock and metal with modern production models like the Epiphone SG Special, which is meant to be as affordable as possible for future rock stars to learn on.
{ "thumbImageID": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin/K36144000001000", "defaultDisplayName": "Warwick German Pro Series Corvette $$ 4-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Satin", "sku": "sku:site51500000072278", "price": "1,949.99", "regularPrice": "1,949.99", "msrpPrice": "2,549.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin-1500000072278.gc", "skuImageId": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin/K36144000001000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Burgundy Red", "sku": "sku:site51500000138040", "price": "1,899.95", "regularPrice": "1,899.95", "msrpPrice": "2,649.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Burgundy-Red-1500000138040.gc", "skuImageId": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Burgundy-Red/K36144000002000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

ESP is another Japanese guitar brand that makes this top 10 list with its many artist endorsements and actual user recommendations. Founded in 1975, it started as a builder of custom made parts for guitarists who want to personalize their existing instruments. Now ESP is known worldwide for their hot-rodded versions of popular guitar shapes, and other unique and eccentric designs, built to please modern rock and metal players.
Several notable ranges of similar guitars were produced with different finishes and features; whilst some companies lumped all variants together with a single model name - i.e. a Fender Stratocaster is a Fender Stratocaster, irrespective of it's finish, in many cases Harmony split it's models, giving a different model designation depending on finish, inclusion of a tremolo etc.
Blueridge Historic Series BR-160 Looks good, sounds even better. Blueridge’s BR-160 celebrates the company’s rich history, which is reflected in the guitar’s vintage dreadnought design. The warm, mellow sound it produces also takes you back to the good ol’ days way before the internet came along. Having this guitar is just like having a piece of history in your hands.

The thoughtful design and close-tolerance machining of the mechanical components of most electric guitars enables them to be set-up and adjusted with great precision. But it is important to make these adjustments in the correct order- Neck-Nut-Bridge saddles. Making fine tune adjustment to any of these elements without reference to the others, or out of this order, will prevent a guitar's true potential from being realized.
Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.
Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.
Yamaha’s also excel in terms of their playability, which is an especially important characteristic for beginners. Too many players sacrifice quality to save money on their first guitar, with the result being that they now have to deal with difficult playability that poses extra challenges to the learning process and can sour the learner’s experience with the new instrument. Yamaha offers an enticing balance between cost and quality.
BOO TO AMAZON FOR CARRYING A MISREPRESENTED PRODUCT. Due to the description I thought we could use this for lessons. It is NOT an instrument it is a toy. It doesn't stay tuned for even a 1/2 hour lesson and the teacher won't allow him to use it for fear that it will hurt his ability to hear when a real guitar is out of tune in the future. I tried to return but they didn't respond for weeks and told me it was too late after they finally responded. The guitar has barely been used at all and won't be used since it is clearly doing more harm than good for a young musician! AMAZON you should drop this product, it is NOT what is presents itself to be!!!
Leaving aside guitarists whose relative fame is debatable (such as Steve Hillage or Terje Rypdal), how can you have a wannabe like John Mayer on your list, but not Dr. Brian May, Jerry Garcia or Jeff Beck? And I’d have also swapped out Tom Morello in favor of Adrian Belew. Belew was making his guitar sound like “everything but a guitar” more than a decade before anyone had heard of Morello. Adrian played with Talking Heads, Joan Armatrading, David Bowie (that’s him playing the crazy solos on DJ and Boys Keep Swinging), and King Crimson back in thee late 70’s and early 80’s. And his song Oooh Daddy at least grants him one hit wonder status, as far as “fame” goes.
Whether you play classical folk or modern metal, it doesn't matter. There is an amplifier to suit the needs of your music and your bandmates. All you need to do is take a moment to determine which features you need and you'll have plenty of amazing options to choose from. If you're just having a browse or aren't entirely sure where to begin your search for an amplifier, you'll almost certainly be best served by checking out our top sellers. An option such as the Fender '68 Custom Deluxe Reverb 22W 1x12 Tube Guitar Combo Amp with Celestion G12V-70 Speaker, for example, might be just what Doctor Rock ordered. This amp is small, yet powerful, and absolutely loaded with tone. Both of its channels boast reverb and tremolo, and, best of all, the "custom" channel features a modified Bassman tone stack, allowing for even more flexibility when you plug in and play.
The Matsumoto Musical Instrument Manufacturers Association was the organization responsible for Fresher guitars. Little is known about this association, other than it did not have larger guitar manufacturers Matsumoku or Fujigen Gakki as members. Nakai Gakki was a possible member of the association. Fresher guitars began production in 1973 by the Kyowa Shokai Company, an association member, which was also responsible for the Camel badge. It's interesting to note that Fresher guitars were eventually being produced by Chushin, which leads me to believe that they may have been an Association member along with Kyowa. The beginning production year was considered a low quality benchmark for the company. The Fresher brand continuously improved in quality until 1980.

The culture of staying up late and having some drinks any and every night of the week was what I grew up around. But it was also twinned with a kind of mountain vibe because they were young and happy to have gotten away from the farmlands. So they were really into pop music. So the two things kind of came together, this assumption that you played or sang.
Electri6ity is HUGE, like over 26 gigs, but it's like having Eddie Van Halen in your plugin bin once you figure out how to use it. The learning curve is steep, but there's no way I would ever be able to play guitar as well as I can program it not to mention afford the thousands of dollars worth of high-end guitars that are sampled. It also includes a very nice effects rack that is optimized for the library (although DI versions are included so you're free to run it through Amplitube or whatever you like).
Does anyone have one of either of these that they can comment on? I dig the looks of the silverburst (though I also dig the cream/ivory colored ones), and kinda want to have an SG in my posession (thanks to Zappa!). I have read all the positive reviews of Agiles on here, but few mention the Valkyrie...I'm a little worried that it is in the lower end of their price range, so I'm wondering how the hardware/electronics/fit and finish are....I'm aware it's not going to be crazy high end, but I'd like it to be useable (even though I may swap out some parts). Any opinions? Also, what parts would you recommend swapping out? Would an Epiphone be a better deal in terms of fit and finish and stock parts?
There was a time when Yamaha were thought of as just a guitar maker for students and beginners - but those days are long gone and Yamaha now produce quality acoustics that compete favorably with the best in this category. The LL16 is a great example, with it's all-solid wood body and built in pickups with preamp, this is a true workhorse instrument. Having premium level specs at mid-tier pricing is like a dream come true, the main reason why we consider the LL16 as the best value for money acoustic in this section.

Great info. I found an interesting connection when researching a recently-acquired Intermark Cipher, as it's said here to be a Teisco, yet it bears a close resemblance to a model of Pleasant, which was credited to the obscure Shinko Musical Company. I wish i could post pics, but essentially, both have the Teisco-like headstock, identical pickups with off-white covers and square pegs, body shape is virtually identical except for the upper cutaway having a slightly different contour, the Pleasant having one more pickup and larger pickguard, both having switches above the pickups. I came upon a drowinginguitars video ( describing in the video description how Kawai (-Teisco?) bought the "Pleasant Guitar Co." (Shinko?). This video isn't the model I have, my Cipher resembles the Pleasant sel-220.

Two ways. The most important is: practice. But the other way is technique. Proper fingering. Some chords have multiple ways they can be fingered, and you always want to pick the easiest. Now, some fingerings may not *seem* the easiest, just because they aren't the ones you already know, but in the long run, they are worth learning because they really do make things easier. In particular, most people play an open A chord the wrong way, but the proper fingering makes it easier.. The essense of fingering is laziness: you want to move your hand and fingers as little as possible. So in particular, if you have a finger down in one chord that's already in the right place for the next chord, you want to just *leave* it there. Don't pick it up, only to place it back down in the same place. And if you can use a fingering that *let's* you just leave it there, then that's clearly the choice!. So let's look at the open A chord. Most people play it with their 1st finger on the 4th string, 2nd finger on the 3rd string, and 3rd finger on the 2nd string, three-in-a-row. But that's a weak fingering (however popular it is). The better fingering is like this: 1st finger on the *3rd* string, 2nd finger on the 4th string, 3rd finger on the 2nd string. It may *look* a little awkward, and feel awkward until you learn it. But it really is the better fingering.. Why? Because consider the context of an A chord. What chords are you most likely to want to go to from an A? The biggest answer would probably be D. Well, notice, if you finger the A chord as I recommend, your first finger is now already in the right place for the D chord, and can just be left there! You only have to move two fingers, instead of all three, to switch between the two. This lets you do it faster and smoother. The other chord you'd be likely to want to go to from an A would be an E, and, while we don't have any fingers exactly in the right place, we at least already have the 1st finger on the 3rd string, like we want it for an E; we just have to slide it back one fret. This is still easier than entirely re-arranging all three fingers. Finally, more rarely, you might want to go between A and Amaj7. For instance, the old Beatles song "Mother Nature's Son" uses the sequence A Amaj7 A7. This is perfect for this fingering! You just slide your first finger back one fret to make the Amaj7, then take it off entirely to do the A7.. Similarly, a G chord normally be fingered using your 2nd, 3rd, and 4th fingers, instead of your 1st, 2nd, and 3rd. This makes it much easier to go to C, the most likely chord for you to be going to.. But no fingering rule is absolute, it's always contextual. If you have a song which requires you to move to something more unusual, and a different fingering would make that particular move easier, then use the different fingering. For instance, if I had something which required that I add an A note to the top of my G chord, then I might well use the common 1-2-3 fingering for the G chord, so that I'd leave my pinkie free to reach the A note.

Taylor Guitars is an American guitar brand based in California. The company was founded in the mid 1970’s, and it has since grown into one of the largest and most respected acoustic guitar companies. Taylor guitars are recognized for their incredible quality, craftsmanship, and innovation, while still being an accessible guitar at a reasonable price.
Entitled Fine Electric Instruments, the 1964 1965 Fender catalogue was circulated from mid 1964, and despite being just eight pages long, contained a large number of guitars, amplifiers and other instruments. This was the first catalogue to show the new Fender Mustang guitar, which was available in normal or 3/4 scale at that time. This catalogue was included in the 1964 annual guitar issue of Down Beat magazine (July), massively increasing the potential readership, both in America and worldwide.

Electric Guitars- Vintage, new & used / Second-hand electric guitars by Kay, Teisco Del Rey Ray ET J-1, Univox & Silvertone. Cheesy Japanese, Surf Guitars. Also guitars by Ibanez, Gibson, Fender, Peavey, Martin, Zon, Gretsch, Rickenbacker, Diasonic & More. Les Pauls recording, lap steels / slide guitars, Barney Kessel style, Fender Stratocasters, Telecasters, Squire Bullet series, Peavey Falcon neck Martin Acoustics, bass guitars, Zon Legacy Elite 5 string Bass, Diasonic double single cutaway, Rickenbacker, archtop, Gretsch TW-100T Traveling Wliburys guitar, Hamer Mirage 1, Yamaha sg-2000, Fender Jag-Stang, Gibson Howard Roberts, Ibanez Artist AR-100 to name a few.

The first recording of an electric guitar west of the Mississippi was in Dallas, in September 1935, during a session with Roy Newman and His Boys, an early Western swing dance band. Their guitarist, Jim Boyd, used his electrically-amplified guitar during the recording of three songs, Hot Dog Stomp, Shine On, Harvest Moon, and Corrine, Corrina.. An even earlier Chicago recording of an electrically amplified lap steel guitar was during a series of sessions by Milton Brown and His Brownies (another early Western swing band) that took place January 27-28, 1935, when Bob Dunn played his amplified Hawaiian guitar.
If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.
I have a Fender Chinese made Telecaster from the Modern Player Series. The finish is spectacular, and while it sometimes feels like they just used a lot of gloss to cover it, it plays and sounds well. I have played it through many amps and it does the job of both a Telecaster and a Strat style. With a humbucking pickup, a lipstick and a strat pickup, this is a satisfying guitar and moddable for people looking for something they can work on without fear of screwing up and wasting a thousand dollars.
The Orange Rocker 32 2x10" Valve Combo Amp is a great amp for those who want a serious amount of power on stage. This all valve stereo amplifier allows you to channel into that signature Orange crunch and utilise the stereo effects loop to really make use of any stereo pedals you may have (Strymon Timeline etc.)  Enjoy massive panning delays, previously only possible by using two amps at once and knock the power down using the "Half Power Mode” for home playing.
Third, the amp should be easy to use: If the controls are hard to figure out, they’ll likely frustrate those who’d rather spend their time playing than trying to figure out how their amp works. Also, every guitarist will at some point have to use someone else’s amp, so starting with an amp that has a fairly common control set will help you learn to dial in your sound when using an unfamiliar amp.
Though because of this flexibility, it can be hard to figure which of the many types of electric guitar is going to be a good fit for your needs. Thankfully, if you’ve arrived at this article you’re going to get all of the information that you need to make an informed decision on which body styles are going to be worth considering for your genre of choice.
The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals start with all-too-similar circuitry – you need the input and output jacks, the bypass switch, and a barrel jack for power input. In some pedals, there may be as much wiring involved in the jacks and switch as there is in the effect itself. The SparkFun Proto Pedal takes care of the hard part and provides you with a simple infrastructure; all you need to do is decide what simple circuit to make to gain your desired effect, and you’ll be ready to rock!
Whenever I can do that, it’ll be a good day. Instead, we’re looking for a the correct combination of quality and cost, just like the aforementioned guitars. Ibanez usually gives you a great guitar for what you pay, so here we’ll narrow things down a little more and look at some of the best Ibanez guitars and "honorable mentions" for our greater list.

You have tonnes of distortion models based on the likes of the classic DS-1 (Dist-1) and Pro Co Rat (Squeak) pedals and more as well as boost, delay and modulation effects. An onboard tuner, stereo/mono looper with up to 80- seconds of phrase recording, tap tempo, stereo headphone output for silent practice and the ability to use up to 7 effects simultaneously.

Modelling effect – Many BOSS modelling effects use COSM or Composite Object Sound Modelling, which uses computer-processing power to digitally precisely model the electronic, mechanical, and magnetic characteristics inherent to an instrument, amplifier, or speaker, and also to create completely new sounds. Modelling effects can be dynamic or time-based – it can even make your guitar or amp sound like a completely different type of guitar or amp.
Chords are the heart and soul of playing guitar. Many guitar players seldom do anything else, other than strumming chords. The chord is the basic building block of guitar music. A chord is simply a combination of two of more notes played simultaneously. Different combinations give you different chords. There are different classes of chords, such as Major Chords, Minor Chords, Triads, Suspended Chords, Diminished Chords, etc...
Do you have a short budget? Then we have included the Dean Vendetta XMT model in my top 10 electric guitars review list. This is very little known guitar and you’d be forgiven if you have never heard of it before. But we can tell you with confidence that once you buy this guitar it will exceed your expectations and this is very much pocket-friendly.
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Ibanez AEQ200T - String Instrument Finish: High Gloss Natural
Bob, 66 is not too late to start playing. I play classical guitar, my preference and I -also play steel string scoustic guitar. I own a Taylor because it lends itself nicely to finger style picking (carried over from my classical guitar. I play with a harpest who did not begin playing until she was 73. She is now 86 and plays someplace almost every day of the week. It's never too late to begin. Go for it I'm 69 and playing more gigs than ever.

Correct bridge placement determines a guitar's intonation when playing fretted notes. The distance between the guitar nut and bridge is the scale length. Placing the bridge too close to the neck shortens scale length and makes fretted notes sharp. Moving the bridge too far from the neck increases scale length and creates flat fretted notes. No amount of tuning helps a guitar with a poorly positioned bridge. Any fretted note falls high or low of the desired pitch.
Martin opened its “Custom Shop” division in 1979.[7] Martin built its 500,000th guitar in 1990, and in 2004 they built their millionth guitar. This guitar is entirely hand-crafted and features more than 40 inlaid rubies and diamonds. It is worth an estimated $1,000,000.[8] As of 2007, Martin employs 600 people. Thirteen workers are devoted to quality assurance[citation needed]. In October, 2009, Martin purchased at auction a D-28 that was played by Elvis Presley in his last concert for $106,200.[9]
EMG DG20 David Gilmour Wired Pickguard   New from$329.00In Stockor 8 payments of $41.13 FREE 2-DAY SHIPPING Seymour Duncan SH4 JB Humbucker Pickup   New from$79.00In Stockor 4 payments of $19.75 FREE 2-DAY SHIPPING Gibson '57 Classic Humbucker Pickup   New from$164.99In Stockor 4 payments of $41.25 FREE 2-DAY SHIPPING EMG JH Set Custom James Hetfield Signature Pickup Set   New from$249.00In Stockor 6 payments of $41.50 FREE 2-DAY SHIPPING See All Electric Guitar Pickups
I don’t mean to be unfair to the effect (and theoretically, this should be an article devoid of opinion). Flanging is impressive stuff. It’s just that, used heavily—where it best shows off its massive harmonics-plinking capabilities—it can become too imposing a sound for a guitarist to easily play with, which relinquishes it to the realm of background effects and early-’80s electro-pop. Still, plug in and send your brain to space and back.

This aim of this site is to provide high quality SoundFonts (virtual musical instruments in sf2 format) that can be played using a midi keyboard connected to a computer, tablet or smart phone. Emphasis has been placed on real or acoustic instruments particularly piano and other favourites for keyboard players (pads, strings, electric pianos, organs and orchestral) but some SoundFonts here also include high quality guitars, some synths and ethnic instruments. There is also a nice GM set for playing general midi files. The SoundFont format sf2 is widely supported by lots of programs/apps and devices.
I have a problem with the way the neck bows going down from the low to high e strings. I have a Gibson les paul with the recent change in seasons I notice it on all my guitars I can adjust it out but it will some times just do the same thing, I see this on my fender and my Acoustic guitars as well when I adjust this I have a lot of problems with tuning I know this is not exactly what we were talking about but jut a question I wanted to ask I hope I made what I am saying plain enough I am pretty new to all of this. Thank you for all the great info.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Edge III - Cutaway: Double - Hardware: Black - Pickup Configuration: H-H - String Instrument Finish: Devil's Shadow
When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​
The transformer matches the impedance of the driver amplifer to the reverb driver coil and allows a dual phase driving signal to power a reverb coil with one grounded side. The transformer is a standard "70 volt" audio line transformer that is often found on PA systems. One reader reported having good results using a Mouser 42TU013 (1K to 8 ohm) transformer. If you can find a reverb tank with a high impedance driver coil, the transformer may be eliminated, the driver coil will require isolation from ground.

The Builder’s Edition V-Class K14ce - one of four new 2018 V-Class launches that also include a K24ce, 914ce and PS14c - is quite a statement of intent. It combines the new V bracing with a notably different, more comfortable, Grand Auditorium style. Of course, its build-quality is nothing short of exceptional as we’d expect, and not least at this price. We’re also reminded of the K14ce’s high-end lineage, however, by the paua ‘spring vine’ inlay that lies down the majority of the black/dark brown ebony ’board, while a lighter koa purfling stripe sits just inside the ebony edge-binding and continues around the headstock, which is again ebony-faced with a relatively demure paua inlay. The aged-gold Gotoh tuners perfectly fit the slightly worn-in vibe - hugely understated class, just like the green abalone dots in the ebony bridge-pins. While there’s plenty for those who love details to admire, the modern Taylor guitar is hugely sorted in terms of playing feel. V-Class, Builder’s Edition? Get used to those terms. Taylor has upped the ante. Considerably.
Up for sale is an Ibanez RGA7QM guitar equipped with EMG 707/81-7 pickups and Sperzel locking tuners. This guitar is in great condition, has never been gigged and has been kept in my smoke free music studio. Guitar Specs: Mahogany body with quilted maple top 5-Piece maple/walnut Wizard II-7 neck Bound rosewood fretboard with 24 jumbo frets Gibraltar Standard 7 bridge Pearl dot inlay
Epiphone Les Paul Special II Player Pack   New from$249.00In Stockor 6 payments of $41.50 Free Ground Shipping Silvertone SS10 Citation Electric Guitar Package   New from$150.95In Stockor 4 payments of $37.74 FREE 2-DAY SHIPPING Silvertone SS11 Revolver Electric Guitar Package   New from$160.95In Stockor 4 payments of $40.24 FREE 2-DAY SHIPPING Epiphone Slash Appetite for Destruction Les Paul Performance Pack   New from$349.00Coming Soonor 8 payments of $43.63 Free Ground Shipping See All Electric Guitar Packs
Another thing that endears them to many guitarists is that they source 100% of their woods from sustainable sources and they use hydro-electric power. When it comes to the environmental footprint of a guitar, this is an area where Seagull are out in front and the big name brands, who while working hard to improve their own environmental impacts, are still playing some degree of catch-up.
So I was all, "oh no...I want this one." So I did leave with it, and without even asking they sold it to me at less than the price on the thing because it was the demo and had a tiny belt buckle type scuff or two on the back. I think I actually wound up saving a few hundred dollars. I don't know if they figured a percentage of the total should be knocked off, or what.
Semi-hollow guitars are guitars which have an exposed opening, generally in the form of two f-holes on the top of the guitar’s body. The inner chamber of the guitar is then divided into two by a block of wood which runs through the body. A perfect representation of this type of guitar is the Gibson ES-335, which has been used at some point or another by musicians such as: Eric Clapton, Otis Rush, Warren Haynes, Dave Grohl, and B.B. King.
First of all, let’s clear up some minor confusion over the name. It has been variously reported, including by me, that the name “Teisco” stands for the name of a company in Tokyo; however this is not the case. Teisco was simply the name chosen by one of the company’s founders, Mr. Atswo Kaneko. There was another prominent company called the Tokyo Sound Co., Ltd. which was responsible for making Guyatone guitars, another major early Japanese brand, some of which came to the United States as Kent guitars imported by New York’s Bugeleisen & Jacobson and others. However, neither of these companies or their guitars had anything to do with the Teisco brand.
And when you shop with Guitar Center, you can search through our entire chainwide inventory and have any item shipped to your local store for free, or directly to your home. Whether you’re a devoted collector, a player looking to get back that one instrument that got away, or an audiophile trying to capture the true vintage sound you’ve always wanted, the Guitar Center Vintage Collection has everything you need. Start searching today.
The final stage of our ME-80 signal chain is delay and reverb. These ambience effects create the illusion of playing in a different space. It makes the most sense to have them at the end of your effects chain. If you think about it in real life terms, a sound is fully formed it goes out into any space. As a side note, delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.
{"product":{"id":"113900398","stock":"instock","price":"179.99","name":"Vintage 1960s Decca DM1-204 Natural Acoustic Guitar","download":false,"sku_id":"113900398","checksum":"134135816000","rep_id":"site5113900398","displayId":"113900398","sku_display_id":"113900398","sku_rep_id":"site5113900398","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
Pick-Ups – The pickup is preset underneath the strings, on the body of the electric guitar and it works as a magnetic field. When the metal strings are plucked they vibrate and generate a current that is transmitted by the pickup to the guitar cable and to the amplifier. These may is just a single pickup in a guitar or 3 to 4 pickups depending on the guitar.
This guitar is based on Loar's U. S. Pat. 2,020,557 (filed 1934, awarded 1935), in which electric amplification is combined with an acoustic guitar body. The design offered a player the option of switching between electric and acoustic amplification, or combining both, with metal posts through the bridge that transfers vibrations from the strings to the bar-armature. With the posts raised, the bridge comes in contact with the soundboard for exclusively acoustic amplification; with the posts lowered to contact the metal bar-armature, both acoustic and electric amplification is engaged, and with the posts lowered completely, the bridge is lifted off of the soundboard and supported only by the bar-armature for exclusively electric amplification. The back of the guitar, made from arched spruce, with two f-shaped soundholes, incorporates another of Loar's ideas, covered more extensively in U. S. Pat. 2,046,331 (filed in 1934 but awarded in 1936), to use the back of the instrument as a second soundboard by transferring bridge pressure from the top.
Serious quality, 20 foot Guitar / Instrument connection cable. I have sold these for years. They come with a lifetime warranty, that is very rarely needed! Double  (redundant) 20 gauge, center conductors almost makes impossible ever having one go "dead" in the middle of a show! 100% Braided copper shield (not spiral wrapped like most cheaper cables) for silent / noise free operation (means less chance of picking up a radio station or wireless mic during your performance). Super-quality, Neutrik, all metal 280, 1/4" ends / plugs that are shrink wrapped for extra strain relief. The internals are hot-glued between to reduce internal flexion for even greater longevity. Built by the largest manufactured cable company in the US. Very rugged and durable, yet flexible jacket. These are not the cheap cables, nor are they built like most cables. Cheaply!
Below you’ll find the 33 most prominent guitar manufacturers, listed alphabetically. Some specialize in one type of guitar (acoustic or electric), while others do well with both. Some focus on a specific genre, such as metal or jazz, and some do it all. I’ve tried to give a good overview of each brand, along with a few notes on any significant changes for 2018.
Recent amplifiers may include digital technology similar to effects pedals, up to the ability to model or emulate a variety of classic amplifiers. Some modeling systems also emulate the tonal characteristics of different speaker configurations, cabinets, and microphones. Nearly all amp and speaker cabinet modeling is done digitally, using computer techniques (e.g., Digital Signal Processing or DSP circuitry and software).
This is one of the coolest guitars to come out of the Gibson Custom Shop: 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Faded Cherry Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Faded Cherry.
In the past, buying an electric guitar wasn’t always as satisfying as it should be. In the days before the internet, you had to rely on the wisdom of your local guitar store, a couple of magazines, and your gut instinct. You may have ended up with something half decent – if you were lucky – but rarely would you have found your ‘dream guitar’. In fact, without the internet, you probably weren’t aware it even existed!
Possibly the most famous of all guitar effects, the talk box has its indelible place in history.  The guitar signal is pushed thru a speaker into a tube that the player holds in their mouth.  This tube is usually run up a mic stand, so that the player can use the embouchure of the mouth cavity to control vowel sounds that are then picked up by the microphone and pushed back through the PA system.

Post on February 14, 2013 in the RRF Forum:[12] “When John Hall so graciously let me have the license to build Rickenbacker Acoustics back in ’06, I brought a truck to RIC headquarters and loaded it up with all of the remaining wood for Rickenbacker acoustics, in order to free up some shop and storage space in Santa Ana. There was enough undamaged wood for about 40 guitars, and I’ve reached the end of the line with my RIC acoustic builds. I’ve decided to let my license to build Rickenbacker acoustics expire, effective February 1, 2013. All current orders will be built as agreed.
Martin ukuleles produced in greatest numbers in the smallest soprano size, but concert and tenor sizes were available circa 1922. Concert and tenor models were available in all the following styles, with the exception of Style 0, which was produced only as a soprano. Custom order ukuleles, while rare, were available upon request, and may have combined features from various styles.
The standard practice for many distributors was to offer a line of guitars based on popular American designs like Les Pauls and Strats, for example, along with a few original designs. And all were offered at a bargain price or were at least inexpensive enough to compete with the American manufacturers. While the majority of imported Asian-built copies from the era aren’t considered to be of very good quality, the Lotus brand was an exception, mainly because of the factories they were built in.
You would probably be better served to specify a budget, then mention the kind of music you want to learn to play and whether you want an electric or an acoustic. As general advice, within any price range probably a general-purpose guitar would be better for you than something meant for a specific purpose - e.g., no pointy lime green electrics. By general purpose I mean guitars like Strats, Les Pauls, and concert-sized acoustics. Nothing particularly fancy.
In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.
pedal bass fender stratocaster electric amp left handed guitar fender telecaster gibson les paul telecaster ibanez epiphone martin guitar fuzz prs taylor guitar gretsch electro acoustic guitar les paul gibson sg marshall stratocaster fender precision bass tokai rickenbacker free fender bass fender jazz bass resonator guitar 12 string guitar fender amp fender jaguar

When it comes to guitar amplifiers, especially the ones that we love here at PMT, “cheap” doesn’t mean poor quality! Thanks to huge leaps in manufacturing processes, stringent quality control and the fact brands really care about the products they create, you can spend far less on an amplifier and musical instrument these days and still get a fantastic, highly playable and superb quality option for your needs.

Ovation, Roundback, Adamas, Legend, Custom Legend, Elite, Applause, Celebrity, Balladeer, Ultra, Thunderbolt and Lyrachord , The Roundback body shape, Roundback design and Roundback Technology, Guitar Bowl Shape, Fingerboard Inlay Design, Sound hole Rosette Design, Adamas Peghead Shape, Bridge Design, Epaulet Design, Soundboard and Sound hole designs, Guitar Tuning Head are protected by one or more US and Foreign Trademarks and Patents.
Kill Switch A kill switch abruptly stops the sound while it is active and lets the sound play again whilst not active. On guitars with a pickup and pots configuration like that of a typical Les Paul this can be achieved by turning the volume for one pickup off and playing with the pickup selector in the middle position. Whilst holding a note, the player can rapidly switch between middle pickup and the silenced pickup giving a stuttering effect. Do this at your own risk because rapidly switching pickups will inevitably wear your pickup selector. This effect is sometimes implemented by a pedal which is only active while it is pressed down (unlike most pedals which are one click on/one click off). Some people will also modify their guitars to add a dedicated killswitch.
This model comes in Takamine’s NEX cutaway guitar body, and features a slimline mahogany neck with 12”-radius rosewood fretboard. The result is an acoustic that plays really quickly, and is more than comfortable right up in the high frets. Ideal for virtuoso players. Takamine also use their own preamp system here, which includes three-band EQ and gain controls, mid contour switch, notch filter and EQ bypass. It all sounds great.
More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.
I cut my template with a jig saw and a fine tooth blade to make sure it kept a straight edge. Then i mounted it to the body blank using small screws in the ares that would be routed out later like the neck cavity area and where the pick ups would be. You will want to start routing a bit outside your line or the edge of the template so you can get you router bit to the depth it will need to be at for the ball bearing to follow the template. I use a 1/2"x1" bit with a ball bearing guide on top.I make several passes around the body, lowering the router 1/4" at a time for smooth easy cuts. Once you have made your pass were the bearing runs along side the template, it is much easier to rout and you will end up with a nice squared edge to the body.
This little-known company is responsible for the St. George badge. This particular badge was made from 1963-1967. It also produced the rare Shiro guitar. It is possible that the company may also be responsible for the Pleasant guitar badge after 1966. This company may have been a small offshoot of Aria Guitar Company, founded by Shiro Arai, but that has not been verified as of today.

well it all depends on your budget. If you're looking for a beginner guitar go for pluto 39 inch model it will cost you around 5.5k. Don't go below this as all those cheap guitars are useless after 6 to 7 months of use. If you can increase your budget then I'll suggest a cort AD810, pluto 41 inch semi acoustic model, or a fender SA150. These will cost you around 7k to 10k but these are the best you can buy as a beginner! Just remember that your first guitar should not sound crapy and it should be good on your fingers. I hope this helps. Happy guitaring!
It was shortly after the debut of the first Supros that National Dobro entered a period of major transition. By 1935, at least, the company had decided to abandon the sunny beaches of L.A. for the freezing winters of Chicago, then the principal home of America’s instrument makers, and not coincidentally, America’s giant mass merchandisers Montgomery Ward and Sears. Both Wards and Sears had been offering National and Dobro resonator guitars since the late ’20s. Being in Chicago had the obvious advantages of proximity to the resources surrounding the business and being next door to the world’s two largest retailers of the day. The move to the Midwest began early 1936 and took almost a year and a half. Throughout most of ’36, the majority of production continued in L.A.
Firstly, they are cheaper than their tube counterparts, which is why most beginners will end up starting on a solid-state amp. They are also much more efficient, easier to maintain (no need to change tubes), lighter to carry, and less fragile. While the tone of modern-day solid-state amps can be incredible, they don’t tend to be as fluid or responsive as tube amps. For more on solid-state amps, check out our dedicated solid-state amp page.
There’s an old joke in the technology industry: If a product has a problem, simply sell it as a feature. The electric-guitar-effects industry is no different. Music has often thrived on transforming faults into influential sound effects. Before professional studio production enabled granular tweaks in sound, standalone guitar effects emerged from deliberately converting hardware faults—often caused by the limitations of amplifiers—into positive features. By the end of the 1970s, it had become impossible to imagine how R&B, blues, and rock could have existed without these fortuitous mistakes.
This is a real nice D-18 it Booms quite nicely with Vintage Tone of that of a much more expensive Big Named guitar for a fraction of what you would pay..its Japanese crafted 29 years ago by the master craftsman in one of the finest Japanese builders factory.. the great Ibanez...the Label inside says... THE MARK OF QUALITY CIMAR Quality Produced under Strict Quality Control by IBANEZ "Made in Japan" Serial # 82110013k ... 1st 2 digits 82 that's the not all Japanese Ibanez old guitars are so great not at all ..many were very low end guitars we saw in the 60's & 70's as a kid myself most were junk or we called them toys.. now that's not true for all of them though I can honestly say that... This is not a cheap guitar nor is it built cheaply ..this example was one of the good impressive one's they used beautiful grade woods on... This particular example it has a Strikingly beautiful straight grained Sitka Spruce Top ... it has ambered nicely now naturally with it's great patina created over the last 29 years . ya don't get that with a new Ibanez or even dare I say Martin with those white looking spruce top "yuck on thanks"... sorry back to this one ... The back sides & neck are all gorgeously grained AA higher grade Mahogany the fingerboard is dark Indian Rosewood with an ebony bridge..even the Original string Pins are aged beautifully amber tipped... I'm lookin pretty hard everywhere and I can not find a crack - separation or a defect to be found anywhere only the most minute microscopic its that clean.... JVG Condition RATED: @ better than average in Excellent used vintage condition wow!..This neck is arrow straight with a perfect medium slim taper neck feels great and action is EZ to play just about perfect...1-11/16ths at the nut very comfortable feel, frets are considered excellent vintage at lest 92%... Comes with a free Chip board case or an optional upgrade to a Hard shell case / ask... Just in.. no pics yet coming very soon stay tuned! Thanks for your interest.
If you plan to use your delay in conjunction with other stompboxes, it’s important to consider where to place these effects in the chain—especially if you’re using an overdrive, distortion, or fuzz pedal. The most common setup is to place dirt before delay. This is important because it means you’ll be delaying the distorted signal as opposed to distorting a delayed signal, which will sound mushy and indistinct. Because a distortion pedal has the strongest impact on your fundamental tone, it’s typically placed early in the chain, whereas delay is usually placed toward the end of the chain so it can produce repeats of all of the effects added to your guitar sound. Of course, you should experiment for yourself to see what you prefer.
Real quick, I'm assuming you're talking production quitars here, not boutique or full on custom rigs. In that arena, one stands above all others... Gibson. While I was working at strings and things I was shocked at the way guitars were coming in from the factories... Completely not at all set up, some appears to have barely bothers to install strings. It was up to us to set them up to a kennel we felt appropriate, and I'm talking good guitars here, including the brands I play. And then came Gibson. Out of the box they are set up as prefect as can be without being personalized their final fit and finish is unparalleled, I'm sure their final inspection are all former Marine drill instructors and in need of therapy and on top of the physical aspects, at the bitter end they get handed to a guitar player, and some damn good ones by the way, to see if they make muster in playability and tone. It was rare to have one come out of its shipping box that wasn't nearly perfectly tuned. Hats off gents they just don't do it like that anymore ya know. Anyhow, the best one is gonna wind up being the one you like the best at least until you get old like me and start to appreciate somebody find things the right way instead of the fast/more profitable/ whatever else way. A little pride in your work late forever, especially in a disposable society such as this one...

3.  This one is not so much a customer fix as customer negligence.  A crack in the top of an acoustic that is not addressed right away.  Dirt and grime are allowed into the crack and oxidizes the surfaces so that what could have been fixed with a diamond patch on the inside has now become a fix that includes taking away the rotten wood and inserting a splint.  It can be very difficult to match the new wood with the old, and you better make sure the customer knows that his or her guitar will not look brand new.
Adolph Rickenbacher was born in Switzerland in 1886 and emigrated to the United States with relatives after the death of his parents. Sometime after moving to Los Angeles in 1918, he changed his surname to “Rickenbacker”. This was done probably in order to avoid German connotations in light of the recently concluded First World War as well as to capitalize on Adolph’s distant relation to World War I flying ace Eddie Rickenbacker. In 1925, Adolph Rickenbacker and two partners formed the Rickenbacker Manufacturing Company and incorporated it in 1927. By the time he met George Beauchamp and began manufacturing metal bodies for the “Nationals” being produced by the National String Instruments Corporation, Rickenbacker was a highly skilled production engineer and machinist. Adolph soon became a shareholder in National and, with the assistance of his Rickenbacker Manufacturing Company, National was able to boost production to as many as fifty guitars a day.[4]
Went to guitar center and tried 30 guitars. The best was a Gibson hummingbird, and my next two favorites were both seagulls. You can't get a better value under $400. The cedar top on mine sounds fantastic and combined with the cherry sides and back and the mini jumbo shape it brings out the low notes very well while the others seemed to not show the highs. Great guitars
You can set an octave to play the higher or lower notes or both at the same time. This is ideal for those who want to really thicken up their sound and are often used by heavy metal guitarists to make solos and riffs sound really cool! The Valeton OC-10 Octave pedal is a budget friendly choice and the Electro Harmonix Nano Pog is an industry standard option.

Thanks for the post on ’66 Deccas and the video. I have a red sunburst DMI-203 with the chrome pick guard as in your picture. My first electric guitar in 1966 was the same instrument with no name on the headstock but with paperwork saying GHI/Heit. Bought it in a department store plus a Concordia amp for $50. Sold it in ’69 when I needed cash for a car (for $75!). I picked up the Decca about 10 years ago. Vintage Guitar magazine did an article of some work done on it in it’s Jan. 2014 issue.

A guitar is a stringed instrument that has always been a favorite amongst musicians because it creates symphonic tones that foster creative expression. Guitars are available in a variety of make and brands. In India, the guitar is the most commonly played musical instrument. Since a good guitar lasts for more than a decade, it is important to keep a few things in mind when you are buying a guitar for the first time. There are different types of guitar that are available for buying.
Yea, really depends on your area. At the local Guitar Center, the guy seems to know what hes doing. Overworked and underpaid if what iveheard about GC and Sam Ash techs is true though. Theres a local tech who got his site to be one of the top results and hes busy as well. Perfect work. And even though hes busy, hes fast too. Thats why his site is one of the top results though.

This guitar master is actually a custom guitar builder. He started building guitars in 1993. "I've been doing this a long time," Paul says. "It's just really natural to me. I'm weird. I just look at stuff and know how to fix it." When he younger, Paul was good at woodworking, and besides picking up the guitar at 14, he needed another hobby. But learning the craft of guitar repair didn't require a master, simply a book. "Imagine that, great book." He then converted his garage into a shop, and in two years, his custom guitars became commercially viable. "It's the real deal, all high-end neck set stuff." Today, Brian Paul's Guitars are some of the finest guitars on the market. Some of his clients include Susan Tedeschi, Derek Trucks, Jim Suhler, Warren Haynes and Texas Slim. Even Dallas blues legend Bugs Henderson owned one of his guitars.
Call of Duty: WWII Pre-order and get the Multiplayer Upgrade, includes a Weapon Unlock Token and Multiplayer 2XP* *Weapon unlock and 2XP usable in multiplayer only. 2XP limited to 4 hours of gameplay. Call of Duty® returns to its roots with Call of Duty®: WWII—a breathtaking experience that redefines World War II for a new gaming generation. Land in Normandy on D-Day and battle across Europe through iconic locations in history’s most monumental war. Experience classic Call of Duty combat, the bonds of camaraderie, and the unforgiving nature of war against a global power throwing the world into tyranny. Game Overview Call of Duty: WWII creates the definitive World War II next generation experience across three different game modes: Campaign, Multiplayer, and Co-Operative. Featuring stunning visuals, the Campaign transports players to the European theater as they engage in an all-new Call of Duty story set in iconic World War II battles. Multiplayer marks a return to original, boots-on-the ground Call of Duty gameplay. Authentic weapons and traditional run-and-gun action immerse you in a vast array of World War II–themed locations. The Co-Operative mode unleashes a new and original story in a standalone game experience full of unexpected, adrenaline-pumping moments.
G & L Guitars - Leo Fender founded this US Based guitar company with then-partner George Fullerton (hence the name G & L. They offer guitars similar to classic Fenders, but with some modern innovations. It is said that if Leo Fender stayed with Fender, their instruments will be upgraded to the G&L designs, which he considers as an upgrade to his classic guitar creations.
Chorus is the sound at the beginning of the Guns ‘n’ Roses song Paradise City. It is a gentle, shimmering effect that is good for arpeggiated chords and adding that little extra to a lead tone (such as in the solo for Smells like Teen Spirit by Nirvana). However, we recommend using it sparingly as it can sound dated and old fashioned if over used (unless, of course, old-school is what you’re going for). Common controls include level (the volume of the effect), tone (affects the EQ of the chorus effect), rate (how quickly the note shimmers) and depth (how large and prominent the shimmering is).
Even if you are on a budget, it’s always worth looking in the higher price brackets and considering something a little more expensive, which will offer better sound quality (which is always encouraging), better build quality (usually more comfortable to hold and play), looks cooler (which will keep you motivated), and will last you longer – allowing you to grow with the guitar. It’s best to buy at the top end of what you can afford. For additional inspiration, make sure to check out this electric guitar list.
Of course, no-one says you have to use the same mic on each speaker cone. For example the SOS interview with Toby Wright shows an SM57 and an MD421 on separate speakers, and Don Smith mentioned using an SM57 and an AKG C451 on separate speakers when recording Keith Richards. Sylvia Massy Shivy also uses the SM57+MD421 combination, but sounds a note of caution when deciding on the exact positioning of the mics: "You have to be very careful with phase, just check it until the signal is the strongest."
DIY Pedal Kits – supplies hand made guitar effect pedal kits from the UK. All you need to complete their kits are a small number of basic tools. These are a soldering iron, screwdriver and wire cutters/strippers. In addition, needle nose pliers make things a LOT easier but they aren’t essential. Included in each kit is a pre-drilled metal enclosure, 3PDT true bypass) switches (if applicable), high-quality quarter inch jacks, all wire, solder, heatshrink, components, etc needed for the build, 2.1mm center npower supply socket and full color build guide.
Gibson, like many guitar manufacturers, had long offered semi-acoustic guitars with pickups, and previously rejected Les Paul and his "log" electric in the 1940s. In apparent response to the Telecaster, Gibson introduced the first Gibson Les Paul solid body guitar in 1952 (although Les Paul was actually brought in only towards the end of the design process for expert fine tuning of the nearly complete design and for marketing endorsement [2]). Features of the Les Paul include a solid mahogany body with a carved maple top (much like a violin and earlier Gibson archtop hollow body electric guitars) and contrasting edge binding, two single-coil "soapbar" pickups, a 24¾" scale mahogany neck with a more traditional glued-in "set" neck joint, binding on the edges of the fretboard, and a tilt-back headstock with three machine heads (tuners) to a side. The earliest models had a combination bridge and trapeze-tailpiece design that was in fact designed by Les Paul himself, but was largely disliked and discontinued after the first year. Gibson then developed the Tune-o-matic bridge and separate stop tailpiece, an adjustable non-vibrato design that has endured. By 1957, Gibson had made the final major change to the Les Paul as we know it today - the humbucking pickup, or humbucker. The humbucker, invented by Seth Lover, was a dual-coil pickup which featured two windings connected out of phase and reverse-wound, in order to cancel the 60-cycle hum associated with single-coil pickups; as a byproduct, however, it also produces a distinctive, more "mellow" tone which appeals to many guitarists. The more traditionally designed and styled Gibson solid-body instruments were a contrast to Leo Fender's modular designs, with the most notable differentiator being the method of neck attachment and the scale of the neck (Gibson-24.75", Fender-25.5"). Each design has its own merits. To this day, the basic design of many solid-body electric guitar available today are derived from the original designs - the Telecaster, Stratocaster and the Les Paul.
Here, we look at the third and final kind of mini-toggle switch, the “on/on/on” switch. After showing how the connections are made within the switch, and seeing the two types that can be found, we look at two uses for the switch: firstly to create a series/split/parallel switch for a humbucker, and secondly to use the switch as a three-way pickup selector.
Amplifiers for electric guitars are more likely than bass amps to have multiple "channels", but some bass amps also have channels. By providing two or more "channels", each with its own gain, equalization and volume knobs, a bassist can preset various settings (e.g., an accompaniment setting for playing a backing part and a solo bass setting for playing a bass solo). In a heavy metal band, a bassist may use a multi-channel amp to have one setting with an aggressive overdrive, while another channel has a "clean" sound for ballads.
Most people who use this alternate tuning method change the pitch of the sixth string only, the low E, from E to D. This is frequently used for Rock songs when you want a darker tone, such as with Heavy Metal. In addition, dropping the E string two steps to D means that you can play power chords with one finger. Some people also drop the first string (high e) down to D, resulting in D-A-D-G-B-D.
In this article you will learn the basics of guitar effects pedals so you will be better prepared to choose the right analog stomp boxes and digital effects to complement your sound. I’m not going to spend too much time on the science of how effects boxes do what they do. But I will do my best to explain, in plain English, the basics of each effect.
4.) Check the guitar’s string height by pressing down on the first, second, and third fret. You should be able to do so with minimal effort. Come to the 12th fret and press down. The distance from the top of fret to the bottom of the string should be no more than three times. If it is five times, the guitar may have a warped neck or too high of a bridge.
That's a bit if an exaggeration but you're allowed. I would venture to claim that the snobs are those who proselytize Fender and Gibson as being the best (especially Gibson). It's been demonstrated a million times over that they are not. Which does not mean they don't make guitars many people want and like. Especially Fender (I have a GREAT Highway One Strat) who have managed to reach a wider audience with the pricing structure of the Fender brand than Gibson has with the Gibson name. The reason we see so many of them in the hands of pros (and their sheepish followers) is that these companies can afford to buy "stage presence". I would put PRS in that group too; however PRS makes better production guitars than both the above. And I'm not being a snob since I can't afford a PRS.
Control knobs and buttons are typically on the front of the cabinet or chassis, though in some cases, the knobs are on a recessed panel at the back of the top of the amplifier. The most basic amps only have a few knobs, which typically control volume, bass and treble. More expensive amps may have a number of knobs that control pre-amp volume (or "gain"), distortion or overdrive, volume, bass, mid and treble, and reverb. Some older amps (and their re-issued versions) have a knob that controls a vibrato or tremolo effect. The 1/4" input jack is typically mounted on the front of the amplifier. In the simplest, least expensive amplifiers, this 1/4" jack is the only jack on the amplifier.
Martin’s first era of flirtation with electrics ended with its GTs, and, in terms of American production, wouldn’t resume until a decade later. However, in 1970 Martin joined the growing list of American manufacturers to begin importing guitars made in Japan, introducing its Sigma series. In around 1973, Martin, like competitors Guild and Gibson, began importing a line of Sigma solidbody electrics made in Japan by Tokai.
Certain aspects of this thicker sound can only be achieved by using a bigger gauge of string.  Pat Martino, Stevie Ray Vaughan, and other guitar masters are a testament to this philosophy.  A bigger string will offer a bigger sound, if we are willing to make sacrifices in other areas.  Again, these sacrifices may be negligible depending on your genre.
Pedals allow instant variables, with built in effects you have to dial it in every song, I can turn on a chorus on the verse add fuzz on the hook and manage combinations in real time, much more flexible. Also boutique pedals like earthquaker devices and Devi Evers create much more complex sounds within each pedal, it really helps when u are trying to cultivate your own sound.
Jazz guitarist George Barnes is known to have played one of these prototypes in public in 1931, though far as I know, there's no recording of it.  Jack Miller played a "frying pan" in Orville Knapp's orchestra at Grauman's Chinese Theater in early 1932. Another musician, Gauge Brewer, bought two of the first available Beauchamp/Rickenbacher guitars, the other was a more conventional electrified Spanish guitar, and played them in a press event in Kansas, and a series of concerts around Halloween that year. Brewer also recorded both of these sometime in the mid-1930s, but it was one of the old direct-to-record recordings, a one-off, never released to the public (my Mom recorded a bunch of those 78s back in the 1940s and 1950s... tape wasn't quite there yet for regular folks).  Andy Iona was probably the first professional Hawaiian player to go electric.

The LP-100 is among the most affordable, but also the most popular Epiphone models. It is the quintessential beginner guitar. Epiphone Les Paul-100 brings you that classic aesthetic in a package that is affordable and capable of sounding rather great. While it’s not something you’d want to do a world tour with, this Epiphone is perfect for beginners and intermediate players.
I've owned and played Martin, Ovations, Fender, and Gretsch acoustics but none has thrilled me more than the Breedlove Concert Pursuit with cedar top. The tone is definitely different - so balanced and the midrange really shines. Absolute joy to play despite this is not their top line. Not so much a strumming guitar - shines when finger picked. Last but not least, the tone when plugged in is so deep and warm it astounded me. Far better than the others I've had.

I don't need freaky pointy demon guitar graphics or anything like that.....this $249 Agile makes my mouth water. For the price of two cheap pedals or one great pedal it's a guitar that you could work with. Ibanez makes the stylish P90 Jet King for about $375...If I were on a tight budget I'd rather have the basic Agile. Yes I'm aging! Get off my lawn you Jet King kids!!
The Telecaster has also been a long-time favorite guitar for hot-rod customizing. Several variants of the guitar appeared throughout the years with a wide assortment of pickup configurations, such as a humbucker in the neck position, three single-coil pickups and even dual humbuckers with special wiring schemes. Fender offered hot-rodded Teles with such pickup configurations, the US Fat and Nashville B-Bender Telecasters around 1998. The Deluxe Blackout Tele was also equipped with 3 single-coil pickups, a “Strat-o-Tele” selector switch and a smaller headstock than a standard Telecaster. The most common variants of the standard two-pickup solid body Telecaster are the semi-hollow Thinline, the twin-humbuckerDeluxe—and the Custom, which replaced the neck single coil-pickup with a humbucking pickup. The Custom and Deluxe were introduced during the CBS period and reissues of both designs are currently offered.
Since they entered the electric market, it didn't take long before Ibanez became the patron saint of those who appreciate a heavier sound. Their RG series won the hearts and minds of budget crowds all around the world, mainly due to its great tone and overall performance. Today we are looking at an Ibanez RG421, which follows this core policy precisely.
There are several kinds of bridge (located at the bottom of the guitar, where the strings are attached), but to keep things simple you’ll usually find either a fixed bridge or a tremolo bridge. Both have their pros and cons. A tremolo bridge will allow you to experiment with everything from vibrato effects right up to full-on divebombs, and can sound amazing when playing high lead solos. However, tremolo bridges can affect tuning, unless the bridge and nut locks. A fixed bridge is excellent for sustain and tuning stability, although there’s no vibrato. Again, it’s all down to personal preference.
Coupling an SM57 with a small-diaphragm KM84 condenser finds favour with Bill Price and John Fry, while Mike Hedges chooses his favourite Sennheiser MKH40. Bill Price also mentions the importance of finding a very close phase match between the two microphones. "What one had to do was balance those mics equally, grab a pair of headphones out in the studio that were turned up nice and loud, and fractionally position one of the mics so that they were perfectly in phase at high frequencies, because if you had one mic five inches away and the other six inches away you'd obviously get really bad phase shift that would take the top off the guitar sound."

Very nice. I'd love to hear it. 12 strings seem to emphasize the difference among guitars, the 335-12, the Firebird 12, etc. I like the sound of the Rick, but playability is an issue, you might go through three or four before one feels right, then they are so easy to pull out of tune. But you've got a totally unique variety one of a kind variety there.
Had a seven string Ibanez with loose/worn frets worked on. Steve knew right away that the frets had to be tacked and it could use a fret re-crowning and gave me a quote for 125$. I thought it was a bit high but trusted him because of the good reviews. Came back a couple weeks later and he had re-crowned the frets, tacked all the loose frets, tightened down some more loose hardware and did a set-up for only 100$. I am overall quite satisfied with the quality of the work and the pricing. I will be going back to have my acoustic worked on.
GUITAR RIG 5 PLAYER is based on the powerful GUITAR RIG 5 PRO, providing you a straightforward and easy user interface with professional components. The advanced tag-based preset browser makes it easy to find and organize your effect settings. Drag and drop components to the rack to create custom effect chains, and adjust all settings to your needs in no time.

Another factor that may need to be considered is the length of the speaker cable. Very long speaker cable runs may affect the performance of the system, either by causing line loss of power or by affecting the impedance. For best performance and highest wattage output with bass stacks or combos with extension speakers, bassists typically use the shortest possible speaker cable.
A spring reverb unit is really a small amplifier in itself, that sends the guitar signal through a tube circuit to a small output transformer (or through a transistorized circuit) and from there to one end of the springs in a spring can rather than to a speaker. This signal vibrates the springs, is picked up by a transducer at their opposite end, and from there is blended back with the dry signal by degrees determined by a “depth” control, and sent on to the output (or the power tubes, if part of a guitar amp). As you can image, it’s a bulky effect when achieved in this way, requiring at least a couple of transformers, two or three tube sockets and a spring can, but the circuit itself is fairly simple.
Lastly, Capacitors. Now this one is a vast subject matter to cover as there is so much debate about which is the 'best', which is the most 'vintage correct' etc. If you're a member of any guitar forum, I'm sure you've encountered many a thread about this too. There's an awful lot of cork sniffing about this subject, it's pretty bad! but I'm going to keep it as civilized as I can sticking to facts and my findings/experiences.
Claimed to have been invented by guitarist Victor Griffin of Pentagram (who tunes it 1/2 step down).[37] Also used in the song "March of the Fire Ants" by Mastodon, "Rusty Cage" "Holy Water", and "Searching With My Good Eye Closed" by Soundgarden on their Badmotorfinger album, "Cowboy Hat" and some of "Silver Side Up" by Nickelback, "Gasoline", "Shadow on the Sun", "Bring Em Back Alive" and "The Worm" by Audioslave and "Prison Sex" by Tool. Today is the Day have used it on every album since Temple of the Morning Star, Shining use it on most of their album Blackjazz, and Black Label Society used this on much of their early material, often to emulate a 7-string guitar. Used also by Silverchair in the songs "One Way Mule" and "The Lever" from their album "Diorama".
Jimmie Vaughan: based on Jimmie’s own ’57 Stratocaster, the Jimmie Vaughan Tex-Mex Strat reflects his deep roots, traditional style, and preferred Strat features. Noteable for it’s alder body, 3 Fender Tex-Mex single-coil pickups, an extra-hot bridge pickup, a special tinted maple 1957-type V-shaped neck with maple fretboard and medium-jumbo frets, vintage machine heads, original Fender synchronized tremolo, and custom tone control wiring. Tone, tone and more tone.
If you have been playing for a year or two and are looking at something to replace your current model, it would be wise to save a little more and go for a mid-range guitar that may cost between $300 and $500. On this kind of guitar you’ll notice a big difference in sound, as well as the feel of the instrument and the overall playability. Use this page as a starting point to find something that may suit you. Until then, you are probably best off sticking with your current guitar.
Unlike the other brands so far, Martin focuses more on the acoustic side of the world of guitars. They offer both acoustic and acoustic-electric guitars. The quality in the wood of a Martin strongly depends on the model you purchase. Their higher-priced guitars feature extremely high-quality wood, but even the lower end models are made of a decent material. Surprisingly, you can even find their lower-end models sporting Rosewood necks. Rosewood is known as one of the best materials to use for guitar necks. When it comes to resonators, on the other hand, Martin has that one in the bag. Most of the top-quality resonators in other high-end guitars are actually made by Martin. That, alone, should be proof enough of the quality of Martin’s resonators. Overall, Martins are excellent quality and are great for honing finger-picking skills. They are known for a warm, sustained tone and a very bright sound.
• Vibrato: There are several types of vibrato — a/k/a tremolo or whammy bar — tailpieces. They debuted in the 1930s via inventor Doc Kaufman, who developed a vibrato unit that was mounted on a guitar’s body and had an arm that moved side to side. Today’s vibrato arms move up and down and are dominated by the top-mounted Bigsby style vibrato and various types of through-body vibrato tailpieces, ranging from the spring-tensioned arms found on many classic thin solid bodied guitar models to the dive-bombing units like the Kahler and Floyd Rose types favored by metal shredders. These also have fine-tuners for each string, to compensate for any detuning the use of the vibrato arm might produce. Gibson also offers a top-mounted Vibrola unit of its own design.

	Gibson Les Paul Studio Electric Guitar	The Gibson Les Paul Studio electric guitar has been around since 1983. For 2018 Gibson upgraded one of its most well-loved models, fitting it with cryogenically treated frets for greater fret durability, adding fingerboard binding and giving it a Slim Taper neck profile. The core Les Paul tones and quality hardware and electronics are still there, of course.	

Their songs cut right to the melodic and rhythmic core of great rock and roll. Johnny contributed song ideas and slashing guitar arrangements, but he also kept the whole thing on the rails. A straight guy in a world of addicts, perverts, weirdoes and psychos, Johnny’s politics were dubious. But, like Mussolini, he made the Ramones’ rock and roll train run on time for more than two decades. John Cummings passed from this life in 2004 after a five-year fight with prostate cancer.
Guitar amplifier design uses a different approach than sound reinforcement system power amplifiers and home "hi-fi" stereo systems. Audio amplifiers generally are intended to accurately reproduce the source signal without adding unwanted tonal coloration (i.e., they have a flat frequency response) or unwanted distortion. In contrast, most guitar amplifiers provide tonal coloration and overdrive or distortion of various types. A common tonal coloration sought by guitarists is rolling off some of the high frequencies.