Interestingly, the neck is crafted from maple, topped by a 20-fret walnut fingerboard which complements the back and sides nicely. Following the specs of older Gibson guitars, the scale length is shorter at 24.75", while the nut width is 1.725", which gives the instrument a comfortable playing feel. Adding to the already good vale of this guitar is the built-in LR Baggs Element electronics for stage performance, with discrete soundhole mounted volume control. If you are looking for a handcrafted workhorse acoustic guitar that will not break the bank, then check this out.
*VERY GOOD CONDITION, W/CD (NEVER USED)* PAYMENT is requested within 2 days or 48 hours of purchase.   FEEDBACK: Positive feedback and a 5 star rating is such an important part of the eBay rating system. Please contact me before leaving Neutral or negative feedback, I will try to help you. I will leave feedback when feedback is left for me!   SHOP WITH CONFIDENCE 😎   TRUSTED & ESTABLISHED SELLER!!
Small guitar amps, contrary to popular belief, have the ability to produce a very powerful sound. You don’t need a whole lot of surface area to have an impressive sound, as so many chihuahuas have proven by keeping up their owners nights on end with their barking. The small amplifiers, the best of them, have sound comparable to the sounds of the larger amplifiers. This has been proven many a time, especially by the band called Annihilator. The guitar player for the band has a very specific set up for himself, with a relatively small amp being one of the main parts of the set up. While his is not as small as some of the ones here, it just goes to show that a live performance does not need a large amp for good quality sound.
Add to this the physical attributes and ergonomics of a .strandberg* that work together to relax muscles, joints and tendons when playing. Some players are freaked out by the low weight, others by the lack of headstock and some have a natural playing position that places their thumb right at the edge of the EndurNeck™ and is not comfortable at all.
Excellent article. I have found that is a complete waste of time trying to convince guitarist of anything contrary to what they already believe about instruments. The level of passion for the “wood doesn’t matter” camp is truly astounding. We are not testing a new drug or solving cold fusion. The question is simple, does wood make a difference in the tone of an electric guitar? Intuitively, it would seem strange if it didn’t; but, there are many factors that are going to affect the sound produced from a guitar; isolating them is as difficult as creating a study that will convince anyone of an idea they already are clinging to. I think this is a pretty good experiment, better than most I have seen. In the end though, who cares?…really. If someone would like a guitar made out of a Formica counter top…go for it, locking tuners, the pickups and strings of your choice…you’ll be ready to rock. And won’t you be the clever one? As for myself, my opinion, musical instruments have character, a soul if you will. That character comes from the material it is made out of and the craftsman that made it. There is no object more alive than a musical instrument. For arguments sake, lets grant the “wood doesn’t matter” their entire argument. I’d still buy the korina instrument over the countertop. And like most stubborn asses who play guitar, you won’t convince me otherwise.
If you haven’t heard Colin Hay’s acoustic version of “Overkill” from his solo album ‘Man @ Work’, you haven’t really heard this song. This has been my favorite acoustic guitar song for some time now. I like the mainstream version, but this one blows it away. For a taste, try listening to it as a sample on iTunes or amazon. BTW, if you decide to download it, DO NOT get the much shorter edited version off of the ‘Scrubs’ soundtrack.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: guitar value packages","pageName":"[mf] shop: guitars: guitar value packages","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: guitar value packages","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"guitar value packages","prop5":"[mf] shop: guitars: guitar value packages","prop6":"[mf] shop: guitars: guitar value packages","prop3":"[mf] shop: guitars: guitar value packages","prop4":"[mf] shop: guitars: guitar value packages","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}

A diagram showing a wiring modification for a Les Paul or a similar electric guitar with two humbuckers. Wiring schemes using four push-pull pots for additional pickup combinations were made popular by Led Zeppelin guitarist Jimmy Page and later produced as a signature model by Gibson. The modification shown in this diagram is an evolution of the original concept combining coil splitting, phase cancellation and parallel/series switching for a total of 22 different pickup combinations.
At first it sounds kind of like a buzzsaw, but after listening to the song, people usually have a hard time getting the catchy riff out of their heads. The best part? It's one of the most fun beginner guitar songs and anyone can play it! The riff is played entirely on one string, the A string and consists of only three notes. Fun fact, the riff was supposed to be a placeholder for a horns section, but they loved the fuzzy guitar tone so much they never got around to the horns.

Scale length describes the length that string has to be stretched on, from the nut to the bridge. Generally speaking, shorter scale length means softer string tension, making the instrument easier to play. Longer scale length allows for more fret space and more string tension which translates to more sustain. Shorter scale length is advisable for beginners, while experienced players ought to look for guitars with similar scale lengths so the playing feel stays the same even when switching between instruments. Nut width measures how wide the nut is, smaller means easier to play for players with smaller fingers, while wider nut widths allow for more space between each string. Finally, neck profile is the shape or curvature of the back of the neck, and the type of profile you want will depend on your preference, be it vintage style U profile with its fatter neck, or the more modern slim profiles.
The Mustang bass debuted in 1966 as (along with the Coronado) Fender's first shortscale bass, however the Competition finishes were not seen until 1969. It was effectively the same instrument, with sports stripes, and initially a matching coloured headstock. The competition colours were Red, Orange and Blue (although blue was officially called Burgundy). Have a closer look at this 1969 Fender and check out the soundclips through various vintage amplifiers.
Taper – the ratio of wiper travel to the resistance between the wiper and the outer lugs. Logarithmic pots (also known as "log" or "audio" pots, and designated with the letter A) are generally used for volume controls, due to the human ear's response to sound pressure being roughly logarithmic, whereas tone controls can employ both logarithmic and linear pots (designated with the letter B), depending on personal preferences and wiring arrangements.[5][6] Reverse audio pots are sometimes used for volume controls on left-hand guitars, but this is not widespread due to the relative rarity of such pots.
In low-end instruments laminated or plywood soundboards are often used. Although these materials often impart great strength and stability to the instrument, via layers of perpendicular grains, they do not vibrate the same way that natural wood does, generally producing an inferior tone with less amplification. Instruments with laminated or plywood soundboards should be avoided if possible.
Famous for having created reference electric guitars like the Telecaster and the Stratocaster in the 1950's, the US-based manufacturer has also been offering amps since 1948 to complement its guitar range. The first series was called "tweed" because of the typical cabinet covering. Among Fender's most well-known amps, we have the famous Bassman (1952), which was originally conceived for bass guitar, as its name implies, but turned out to be readily adopted by guitar players. The Twin (1952) and its different variations (especially the Twin Reverb) also influenced rock history with The Beatles, Jimi Hendrix and Eric Clapton. Fender's amplifier range is quite comprehensive (see the Hot Rod, Champ, Princeton, and Bandmaster series) and its common denominator is a clean sound that is still a reference in its category.
I’ve been looking for a long time for information on what goes on inside a typical Strat-style 5-way switch, and this site helps me understand these switches a bit more. But I still have questions, though: 1)Why is it necessary to use jumpers from one lug to another? 2)As I understand it, a 5-way switch is 2 separate 4-lug switches wired together, each with 3 input lugs and presumably 1 output lug, OR are these lugs INPUT as well as OUTPUT lugs? (I get the impression that they are dedicated to either input or output, but looking at some wiring diagrams, it appears that inputs from pickups can come from either side of the switch.) 3) Is one side the INPUT side and the other the OUTPUT side, or are both sides of the switch mirror images of one another? In other words, must the signal from the pickup enter the switch at one side, and exit the switch at the other side? It seems I can only really understand how these switches work in terms of inputs (from the pickups) and outputs (to the output jack or volume pot). Without knowing whether a certain lug is acting as an input or an output, it can be hard to understand which way the signal is travelling.
If you know that you want to use your mini amp to reduce the audio footprint of your jam sessions as much as possible, you’ll pretty much have your pick of the litter among miniature models. That’s because even the most powerful of these amps can produce viable tone at a very low volume, as manufacturers know that this demographic needs the ability to play quietly. If you want to maintain a certain degree of audio fidelity and flexibility, you might need to aim for one of the slightly larger mini amps out there. Models with at least five, and preferably 10 watts will be the best for generating a realistic and presentable guitar tone. Some of these are even nice enough that you could use them to perform at any venue capable of miking the amp itself.

The first signs that the times they were a-changin’ began to appear in 1960 with the debut of the T-60 and the EB-1. The T-60 (named for the year) was a more-or-less Jazzmaster-shaped guitar with an extended upper horn and backward-sloped lower cutway. Even the pickguard was similarly shaped, although not tripart, bearing three pickups, the bridge pickup angled slightly like a Strat. Controls included one volume and one tone and a chicken-beak rotary selector. This had a covered bridge/tailpiece assembly. The headstock was a long, extended variation on a Fender Strat head, with six-in-line tuners, with a round sticker Teisco logo on the round tip. Fingerboard inlays were the soon-to-become-signature rectangles along the upper edge. However, the most striking detail was the so-called “monkey grip,” a handle-shaped cutout on the top of the lower bout. This design would continue through the ’60s (two decades before Ibanez would introduce it on its JEM guitars!).

This guitar is of the finest, and yet it is only fraction of the cost that you would normally pay. You may be wondering how such an amazing product could be so cheap, it is possible because it has been manufactured in China, where labor is cheap. Cheap labor does not mean that has been compromised; all parts are of the highest. We have our own factory that recreates them. Our version of Custom Shop Guitars is 95% same as the original in terms of quality and design, the parts are made and imported from China, Japan and Korea in order to manufacture the best musical instruments. When purchasing this guitar you can only stand to win. If you are satisfied, you have just saved yourself hundreds of dollars! So go on, treat yourself to the guitar you have always wanted. We use the best pickups; best tuning keys and other hardware. All of our guitars are custom made guitars. The Top Guitars specializes the world’s finest custom guitars, major guitar brands, boutique brands and collectible guitars. Owning the latest state of the art equipment, craftsmanship and skilled technicians. Our products are exported to Southeast Asia, North America and Europe. Our 100% satisfaction guarantee allows you to buy with confidence!

After choosing the best guitar brand for you, there are still things you need to consider before buying an electric guitar. First, you must consider how much you’re willing to spend. You need to set a budget and pick your guitar accordingly. Take into consideration that electric guitars require gear like cables, amplifiers, and pedals, which you will also need to include in your budget. The second important thing you need to keep in mind is your music preference. The style of music you want to play has a major role in the kind of guitar you should get. Take a look at the guitars of your favorite musicians and make your choice based on that. Lastly, bear in mind that there are lots of different body shapes for guitars. The three most popular categories are single cutaway (ex: Les Paul), double cutaway (ex: Stratocaster) and exotic (ex: ESP). The right guitar shape will ensure your satisfaction and will make playing your instrument much more enjoyable. Keeping all these things in mind will guarantee that you pick the best guitar for yourself.
Yamaha is famous Japanese Company known for producing an extensive range of musical instruments. It has caught the attention of the beginners and intermediate guitar players due to its budget-friendly product prices. Thus, it is the excellent choice for those who are going to have a first experience of buying any guitar. They can indeed get a good deal without costing a fortune. It is also suitable for Acoustic players. Yamaha continuously produces high-quality instruments that are unconquerable when it comes to the material or even sound quality.
A rivalry sprang up between Fender and Gibson, creating some of the solid-body electrics most coveted by musicians and collectors, including the 1952 Gibson “Les Paul” model with a curved top and a combination bridge-tailpiece (the guitar was designed primarily by McCarty, with input by the famous guitarist who endorsed it), the 1954 Fender Stratocaster, and a 1958 version of the Gibson Les Paul with a new “humbucking” pickup that transmitted less background interference from electrical equipment.
The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
The guitar measures 41 inches in length, and it comes with a 25.75-inch scale and 20 frets for various playing techniques. You also get strong D’Addario strings for reliable performances every time, as well as enclosed die-cast gold tuners, so you never play an off note. This dreadnought guitar features a cutaway so you can easily practice finger techniques on the higher frets.
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.
Taylor, Martin, Gibson all great production brands... Which is better comes done to what you like sonically, visually and of course the feel in your hands. It is also difficult to compare one brand versus another unless you are comparing similar designs using the same tone woods and in the same price range. Anyone espousing one is better than the other without doing this is not being honest with themselves. I own a Martin and two Taylors, all are great and have different voices and feels... Even the 2 Taylors are very different in sound and looks. In the end I vote for Taylor because I like the neck carve and feel that the looks and build quality are a bit better in the $3K - $4 price range. If your looking for something in a lower $500 - $1, 000range you probably should be considering Yamaha or Takamine. Though in the end you get what you pay for.
{ "thumbImageID": "GRX20-Electric-Guitar-Black-Night/519417000787000", "defaultDisplayName": "Ibanez GRX20 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Night", "sku": "sku:site51275776901849", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Black-Night-1275776901849.gc", "skuImageId": "GRX20-Electric-Guitar-Black-Night/519417000787000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51275776902065", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Jewel-Blue-1275776902065.gc", "skuImageId": "GRX20-Electric-Guitar-Jewel-Blue/519417000085000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The Rolls-Royce of multi-effects pedals is the Line 6 POD HD500X. As far as the top 5 pedals in this guide, the HD500X is the most full-featured, most complex, and also the priciest. Despite carrying a higher price tag than the others, it comes very highly recommended and landed a solid second place on our list, and this is mostly due to two things:
{ "items": 1, "margin": 0, "loop":true, "dots":true, "lazyLoad":true, "autoplayHoverPause":true, "navElement": "div", "nav": false, "itemElement": "li", "stageElement": "ul" //"jqueryLazyLoad": true, //"jqueryLazyLoadOptions": { "effect": "fadeIn", "skip_invisible": false, "threshold": 300 }, //"autoplayHoverPause":true, //"responsive":{ "0":{ "items":5 }, "1158":{ "items":6 }, "1340":{ "items":7 }, "1500":{ "items":8 } } }       

Martin is an American guitar company specializing in acoustic guitars. Most of their instruments are still built at their facility in Nazareth, Pennsylvania, and their legacy dates back all the way to 1833. Martin, in many ways, has helped to shape the look and sound of the American acoustic guitar. In fact, they invented the now-classic dreadnought shape in an effort to help American country musicians who wanted more projection out of their guitars onstage.
Even though the Orange Amps were still neither of the Top of of all lists because the Fender and the Marshall are amongst well known amplifiers for its individual claims in both patent and innovated in each technologies, (Fender corporation claims its first solid body elecric guitar to been market in mass productions and patents, whilst the other one Marshall claims either in terms truest guitar amplifications that also in mass production, so on Marshall claims a patent innovation itself and both of them were been a major direct suppliers on every famous music artists in every decades of music revolutions, on the other hands, the top spots of their hardship innovations were be at their hands, until to theIR last steps of their innovations, let the famous artists decide their demand at their hands whilst on the other side, Orange produces amps with considering a reasonable market on its considerably fine quality products because, the top spots were be still at working, and it means, ...more
The SSL-10 had become the SSX-10 ($387), with humbucker/single/single pickups, pretty much the same. This came with jumbo frets, a satin-finished neck and a 14 degree backward pitch on the head. The rosewood ‘board now sported the “wave” or triangular wave inlays popular on Kramers, Charvels and Jacksons of the period. No mention is made of vibrato, but that doesn’t mean it didn’t have a tradition-style unit. Colors were now Carrera midnight blue, metallic black, purple burst, dark red, white pearl and blue pearl, all with chrome hardware.
Steel-string Acoustic Guitar The steel-string acoustic guitar is a modern form of guitar that descends from the classical guitar, but is strung with steel strings for a brighter, louder sound. The most common shape is the dreadnought (originally developed by C.F. Martin & Company), which incorporates a deep soundbox and a smaller and less pronounced upper bout, giving it a wedge-shaped appearance. Other popular body styles include the larger jumbo body shape, as well as the smaller auditorium (000) body style and even smaller grand concert (00) body style. Check out the Martin Ed Sheeran X Signature Acoustic Electric for a smaller body type with a punchy sound.
Overall length is 28 1/2 in. (72.4 cm.), 10 in. (25.4 cm.) width, and 1 5/8 in. (4.1 cm.) in depth, measured at side of rim. Scale length is 15 1/4 in. (387 mm.). Width of nut is 1 3/4 in. (44 mm.). All original and complete, and quite clean overall; there are a few small dings to the finish and some light checking-almost inevitable on the Eko-made Vox instruments. The only notable finish marring is one spot where a superglue repair to a cracked pickguard corner left a bit of residue behind. A very nice little player, with an awful lot of chime! Excellent - Condition.
I have 2 Kent guitars. One like a Strat and one 12 string hollow body. I know they were made in the 60s and were distributed by Kent Musical Products. Address:5 Union Square, New York. 10003. And they were a subsidiary of Buegeleisen & Jacobson, Inc. Any further info on these would be appreciated. Most sold in the price range of 100 dollars and up.

We've already shown you one of Epiphone's Les Pauls. However, that guitar and this model we're looking at here are simply not comparable. Les Paul Standard features a much better set of pickups as well as hardware. Each of the four available finishes on this thing is superb and includes a number of subtle details which really add to the beauty. Most importantly, Epiphone's Les Paul Standard will give you a true taste of what a legit Gibson Les Paul tastes like without breaking the bank.

The guitar itself features a resonant and solid American Alder body, maple neck and 2 x single-coil pickups with 1 x humbucker installed with a coil tap function for tonal variety. The guitar is comfortable to play and sounds great especially when you throw some distortion at it through an amplifier. The guitar is budget friendly and ideal for beginners and home recording enthusiasts thanks to its high build quality and comfortable playing experience.
As such, a velocity-sensitive MIDI keyboard is a must here, and the more experience you have with string instruments, the more you will get out of this VST. It's knowing things like how the string all have different weight and tension behind them and how the volume changes when a plectrum thwacks against the strings that will give guitarists the edge here.
Guitar Tricks has a special Discount Coupon Code that will make it even cheaper for the first month. You can get 60% discount if you choose the monthly subscription. To take advantage of this offer follow the link below and key in your email address. You should wait for an email with your username and password for Guitar Tricks. Use this information to logon.  Once you are inside Guitar Tricks select the Upgrade button and choose the Monthly Membership option. In the Coupon Code section on the same page enter the Coupon Code ‘60OFF’ to get the 60% discount on your full access membership for the first month.
Either way, the results in the Descent Reverb are nothing short of phenomenal.  If you watch the demo video below, you'll hear some of the most unique sounds capable of being produced by a guitar pedal. Pigtronix did something similar with delay and pitch shifting in the Echolution 2 Ultra Pro, but we think the combination is even better in the Descent.
The Tube Screamer pedal has a long list of iconic users including Stevie Ray Vaughn, Gary Moore, John Mayer, Joe Bonamassa, The Edge and many more. As such, it is only expected for a company like Ibanez to take advantage of its popularity to extend their reach in the amplifier market - resulting in the creation of the Tube Screamer Amp (TSA) series. The Ibanez TSA15H leads the series in terms of ratings, with its compact yet versatile head profile while having the same combination of tube amplification and built-in tube screamer circuitry. At its core are two 12AX7 preamp tubes and two 6V6 power amp tubes, a standard configuration that sounds good on its own. Its standout feature is the implementation of a Tube Screamer circuit, which comes complete with the same controls as the iconic green pedal it is based on.
Japanese classical guitarist Shiro Arai founded the Arai Co. in the 1950s as an international importing company, which expanded to manufacturing in the 1960s adopting the "Aria" brand name. The explosion in popularity of the electric guitar in the 1960s led them to begin manufacturing and distributing several different brands, Lyle being one of them. Arai attended the NAMM trade show and saw many of the American guitar designs that had attained popularity in the U.S. This greatly influenced Arai to produce similar models.
TRUE. Tommy can be good but I find he has a lot of filler and some overly fluffy tunes sometimes. It makes it sound like he’s trying too hard to play it with as many different chords as possible before finally landing the first note. (which is usually late). and for clapton below me I could agree but I think Jimmy Page’s playing is just as good but he’s more reckless. he’s reckless for good reason though, it’s like he’s transfering his feeling to it like Jimi Hendrix would but Page’s guitar sounds like your heart wanting to rip out of your chest to claim your biggest desire once and for all. The kind of vibe when you finally realize your in love after a LONG time of dullness. Jimi is groovy, and Clapton likes to serenade seeming like an old gentle man from any age.
Next important control knob is usually labeled as time or rate. This defines the length of echoes in a reverb. You can have them short or you can have them last for a fairly long time. Which side you will lean more towards is going to depend on the nature and tempo of your music. Slower, more subtle riffs can easily deal with long reverb times while faster sections usually work best with short reverb. Again, experimentation is the key here.

We are here today to help you break free.  It's time to understand the difference between the types of guitar strings.  We can have higher value from our brand of choice or any other by understanding which product serves our personal preferences and instruments the best.  Let’s dive in and learn about the many variables that makes certain strings better or worse for each individual player.
A scaled down Grand Symphony travel size guitar. It features sapele laminate back and sides with an option of a solid mahogany or Sitka spruce top. It has been acclaimed for having a full size guitar sound despite being a compact size. Although it doesn’t come with an onboard Expression System, an optional ES-Go Pickup can be easily installed for amplification.
No matter whether you used method A or B, you can now go about measuring the neck bow. This is done by measuring the string height (the gap between the ruler/string and the top of the fret) at about the 8th fret. There is a lot of debate over how straight a neck should be, and in fact it really is personal choice, but a height roughly the same as the thickness of a B string is a good starting point. Personally, I use a 0.012” feeler gauge to do this, but you could use a B string. Simply slide the feeler gauge/B string into the gap to see if it is too big/small.
Most modern effects use solid-state electronics or computer chips. Some effects, particularly older ones such as Leslie speakers and spring reverbs, use mechanical components or vacuum tubes. Effects are often used as stompboxes, which are typically placed on the floor and controlled with footswitches. They are also built into amplifiers, tabletop units designed for DJs and record producers, and rackmounts, and are widely used as software VSTs.
There’s been a steady evolution in effects signal processing since the 1940s. Guitarist-innovator Les Paul was among the first and most avid effects developers, experimenting with echo and multi-track recording to add sonic excitement to his music. The first foot-switched effect showed up in the late ‘40s with Harry DeArmond’s Trem Tol tremolo processor that was later used by Bo Diddley. In the 1950s and early 1960s other effects were developed, but they tended to be expensive and some had operational issues. Meanwhile amplifier makers such as Fender and Gibson were building reverb and tremolo effects into their amps. These tube amps also produced tasty distortion and overdrive effects when gain and volume were cranked up to maximum settings. Today, many effects are designed to reproduce those sounds.

The Pacifica family of guitars was launched years ago to address this market in particular. They’re excellent guitars for the working man and student alike. After a break-in period, these machines should provide stable, frustration-free operation for many years, with enough tone and versatility to play any style. The video below even demonstrates how, with a solid amp, you might not even know it was inexpensive.

When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​
Many experiments at electrically amplifying the vibrations of a string instrument were made dating back to the early part of the 20th century. Patents from the 1910s show telephone transmitters were adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge; however, these detected vibration from the bridge on top of the instrument, resulting in a weak signal.[2] With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.