Alan Parsons: "I always use condenser mics on a guitar amp, never dynamics — they're too telephoney. That's an unfair expression for a very good dynamic mic, but by comparison to a condenser, you're not going to get the bottom end." While this stance is more hard-line than that of most engineers, condenser mics are, of course, regularly used for recording electric guitars. However, in practice they rarely seem to be used on their own and are very often lined up alongside the trusty SM57.
Note that the information presented in this article is for reference purposes only. Antique Electronic Supply makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.
Simple mistake that the beginners do is not selecting the right pickup on the right time. For example Normally they put the switch for the bridge pickup for soloing or do the powerchords. But then, to do some plucking, clean strumming or ryhthm, they still using the bridge pickup. So the sound is so dry, They should change it to toggle number 2(or for 5 way switch, toggle number 2 or 4)
If you like to run all your effects into an amp set clean and get your gain sounds from pedals, you probably don’t ever need to consider using amplifier effects loops or a wet/dry/wet rig. If your amp(s) are set relatively clean, you will be able to use any of the effects listed above straight into the front of the amp—and they should sound really good.

There are many similarities between the two designs, such as the exquisite detail of the visual appointments, from the bound necks and headstocks to their trapezoid and block inlays.  They both include separate volume and tone knobs for each of the two humbuckers, which can be switched between or used in conjunction with the 3-Way Toggle switch.  Once you get your hands on one, the differences become apparent quickly though.
The objects connected to the red and purple wires are a capacitor and resistor in series. The round brown object is a capacitor, typically around .001 microfarads. The rectangular brown object is a resistor, typically around 150K ohms. Increasing the value of the capacitor will expand the treble range you're preserving. Too large a value, end you'll be preserving midrange, too. Too small a value and you'll only be preserving the highest treble frequencies.

When you are shopping for effects pedals, a good feature to look for is true bypass. Your overall signal path is vulnerable to noise and impurities introduced by the circuitry of anything between your guitar and your output device (such as your amplifier/speaker). Pedals without true bypass, or ones with buffered circuitry, will contribute to some signal degradation as your signal passes along the path because the signal is routed directly through the pedal circuitry. Pedals that have true bypass direct your signal around the pedal’s circuitry, or bypass it, when you switch the pedal off, thereby maintaining the integrity and cleanliness of the signal. Your amplified guitar will sound more robust as a result and you won’t be required to crank up your volume as much to compensate for lost signal. The only disadvantage of pedals with true bypass is that sometimes, when you're playing with distorted or high-gain amplifier tones, you might notice switching noise when you switch the pedal off and on.
Maybe the pickups that came with your guitar are just cheap and not up to your standards. At that point, an upgrade might be less of a stylistic issue and would done for the purpose of improving the overall sound quality of your instrument. In most cases, upgrading the pickups on your guitar are the single most effective way to improve the overall tone and sound quality.

It is an obvious fact that all those great guitarists must have had a humble beginning, having started with the best beginner guitar that suits them. Some of these artists started with guitars inherited from their parent, friends and/or relatives while others ordered theirs from guitar shops. If you are a newbie yet a guitar enthusiast and you are seeking to buy one among the best guitars for beginners, then there are tips and facts you will have to put into consideration.

Purchase a more suitable microphone, if necessary. If you have found that your mic really doesn't capture sound the way you need, you'll have to research to find the right mic for your situation. For example, you might use a large diaphragm condenser mic to capture crisp, pop rock tones.[32] However, you should be able to achieve consistently good recordings with the use of either a common:

 The world-wide reputation of the company is not based on design data and performance alone. The real key to success of SWING is "Outstanding People". Every staff member at Swing has a background as a professional musician. Moreover, we were all career veterans in guitar engineering with decades of combined experience, well before founding our new vision; Swing Guitar Technology. If you are familiar with musical instruments companies or have seen their ads or brochures, you may notice their catch phrase like "It's about Music." Nothing could be closer to the truth, based on Swing's pedigree. From the selection of materials to their treatment and hand fitting. From mechanics to electronics. Each stage of each final product is mastered by SWINGers.

{ "thumbImageID": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "defaultDisplayName": "Fender American Professional Jazz Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030611", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black-1500000030611.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030610", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray-1500000030610.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray/J46145000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
I wanna weigh in, I’m just an average player but having one of the best luthiers around and talking to them really gives you an idea of what quality your getting from a guitar. I play a martin DC 16gte, my singer plays a Chinese knock off Taylor. No one can tell the difference when he switched to the real genuine 314 CE Taylor (basically made the same way as the Chinese one), and we get no complaints about either guitar. Save your money, (buy quality) or buy the Chinese knock off and find it’s made the same and it will make you the same money playing and feel just as good in your hand as the 1000 dollar plus Taylor. Conclusions for Taylor or martin fans is don’t go name brand cause they (known or unknown) swear by them, is all personal preference, try everything in every price range find what’s right for you. My $750 DC 16gte Martin was right for me. My singer the 914ce Taylor Chinese knock off (327 bucks new) suits him better than his 1200 dollar original Taylor 314ce.
The first recording of an electric guitar west of the Mississippi was in Dallas, in September 1935, during a session with Roy Newman and His Boys, an early Western swing dance band. Their guitarist, Jim Boyd, used his electrically-amplified guitar during the recording of three songs, Hot Dog Stomp, Shine On, Harvest Moon, and Corrine, Corrina.. An even earlier Chicago recording of an electrically amplified lap steel guitar was during a series of sessions by Milton Brown and His Brownies (another early Western swing band) that took place January 27-28, 1935, when Bob Dunn played his amplified Hawaiian guitar.
Although they just released the Gibson 2016 line, Gibson's first production electric guitar, marketed in 1936, was the ES-150 model (“ES” for “Electric Spanish” and “150” reflecting the $150 price of the instrument). The ES-150 guitar featured a single-coil, hexagonally shaped pickup, which was designed by Walt Fuller. It became known as the “Charlie Christian” pickup, named for the great jazz guitarist who was among the first to perform with the ES-150 guitar. The ES-150 achieved some popularity, but suffered from unequal loudness across the six strings.
"Acousterr's tab maker is a tablature maker application which can be used to write down and compose music. Users can create tabs, play them out, explore tabs created by other users. They can choose any instrument like guitar, bass guitar, piano, ukulele. The sounds are mathematically modelled to be generated at runtime for any combination of notes and effects like hammer on pull off etc for different types of instruments. This gives a beautiful listening experience. Multiple tracks can be added in a single tab which play out simultaneously, so as to simulate an entire song with various parts like bass guitar, lead guitar, rhythm guitar etc. The UX for editing multiple tracks has been meticulously designed to allow tab lines to synchronise easily. With great keyboard support, notes can be easily added and chords can be created on the fly by pressing shift key and selecting multiple notes. Scale helper is there to allow composing solos easily. Designed to work well on mobile browsers too."
Very good working condition, this guitar is completely playable and in great condition. All electronics function properly without any issue. This guitar contains very minor cosmetic scuffs throughout, typical wear from a used guitar, nothing at all significant, please see pictures. The body, neck and headstock are all straight and contain zero cracks, bends, or bows. This guitar will come exactly as shown with soft gig bag.
Original Stratocasters were shipped with five springs anchoring the bridge flat against the body. Some players removed the backplate covering the bridge to remove two of the springs and adjust the claw screws to allow the bridge to ‘float,’ with the pull of the strings in one direction countering the pull of the springs in the opposite direction. In this floating position, players could move the bridge-mounted tremolo arm up or down to modulate the pitch of the notes being played. Jeff Beck and Ike Turner used the Strat’s floating tremolo extensively in their playing. However, other players, such as Eric Clapton and Ronnie Wood, disliked the floating bridge’s propensity to detune guitars and inhibited the bridge’s movement with a chunk of wood wedged between the bridge block and the inside cutout of the tremolo cavity and by increasing the tension on the tremolo springs. These procedures lock the bridge in a fixed position. Some Strats have a fixed bridge in place of the tremolo assembly; these are colloquially called “hard-tails.” Luthier Galeazzo Frudua has said the floating tremolos can have stable tuning through techniques specific to a floating bridge.[8] The Stratocaster features three single coil pickups, with the output originally selected by a 3-way switch. Guitarists soon discovered that by jamming the switch in between the 1st and 2nd position, both the bridge and middle pickups could be selected, and similarly, the middle and neck pickups could be selected between the 2nd and 3rd position.[9] This trick became widespread and Fender responded with the 5-way pickup selector (a standard feature since 1977), which allowed these tonal combinations and provided better switching stability.
For this particular setup, I used a Fender Stratocaster. George used those quite frequently. They used a Tweed Champ. Now, these were being used quite a bit around that time. Eric Clapton was using them on Layla, and word is that when Clapton was playing on All Things Must Pass, he had his Champ there, and I know for a fact that George had a collection of tweed amps.
“Volume pedals work well just before any delay or echo effects, as you can fade in and out of delays smoothly. A volume pedal at the very end of the chain just before the amp input will control master volume, and can also be used as a mute. Reducing the signal at this point will also reduce any noise. I put clean boosts right at the end—also just before the amp input—to ensure that any effects earlier in the chain would not be overloaded.”
I took a guitar to this great place to have new strings put on it. I explained to the owner that the guitar belonged to my son who had been killed in a car accident. I was donating the guitar to a pro...gram called SOAR. A program for veterans to learn to play. They are a therapy type program for any veterans. Thank you for the help I received to be able to give this guitar to this worthy program. They are great people in the guitar store. See More
I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"classical & nylon guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
I always say that Jose Feliciano? is indeed one of the greatest guitarists that’s ever lived. Flamenco, latin, bolero, classical, rock ect ect…. You name it and Jose can play it. Why he’s not on Rolling Stone’s 100 greatest guitarist of all time, is beyond anyone’s guess. dont believe me look up on youtube purple haze, the thrill is gone, flight of the bumble bee, Malagueña under Jose Feliciano. the guy can play anything and make it his own.
{ "thumbImageID": "GRX70QA-Electric-Guitar-Transparent-Blue-Burst/H77128000001000", "defaultDisplayName": "Ibanez GRX70QA Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Blue Burst", "sku": "sku:site51313248770709", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX70QA-Electric-Guitar-Transparent-Blue-Burst-1313248770709.gc", "skuImageId": "GRX70QA-Electric-Guitar-Transparent-Blue-Burst/H77128000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Red Burst", "sku": "sku:site51313248770799", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX70QA-Electric-Guitar-Transparent-Red-Burst-1313248770799.gc", "skuImageId": "GRX70QA-Electric-Guitar-Transparent-Red-Burst/H77128000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Black Sunburst", "sku": "sku:site51313248770729", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX70QA-Electric-Guitar-Transparent-Black-Sunburst-1313248770729.gc", "skuImageId": "GRX70QA-Electric-Guitar-Transparent-Black-Sunburst/H77128000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Have you ever tried PRS acoustics before? They come with their SE line, and are fantastic quality guitars for the price. And their American acoustics are built by a small team of acoustic professionals. They only do "private stock" American acoustics now, but they used to have it as a regular lineup with about the same price tag as their custom 24. I've only ever heard them in video, but they sound amazing, and I've only ever heard good things about them. I would argue that PRS should have made that top 10 acoustic list at least over Fender or Epiphone.
Although it’s a minor issue when choosing your first guitar, the tone and sustain that the guitar can produce relies on the quality of the material it’s made from. The most used tonewoods in the budget range are basswood, poplar, alder, and paulownia, while more expensive guitars can be made from pine, mahogany, and swamp ash. This is just a rough rule though – these days you will find mahogany in budget guitars and basswood in premium models. They all have different tonal qualities – for example, mahogany typically offers a warmer sound, swamp ash is brighter, while basswood and alder are well-balanced.
Deco Tape Saturation & Doubletracker is a unique effects pedal that allows for a wide variety of tonal possibilities.  You can place Deco near the beginning of your signal chain and use the Tape Saturation as a light overdrive.  Or, you can place Deco at the end of your chain, use lower Tape Saturation settings, and provide your entire signal with the tape-like warmth, compression, and added low end harmonics.
Around the same time as the 700-800 series of guitars there was also a line of acoustics. The steel-stringed "Folk Guitars" featured necks and headstocks very similar, if not the same as, the electric models. The nylon-stringed "Classical Guitars" featured slotted headstocks with the curly logo squeezed into the middle. The acoustics seem to be pretty well-made and often fetch pretty good prices on Ebay. One reader of this site even found a Kent banjo made in Germany. The lettering of the name is the same as on the 700-800 series instruments without the curly thingie.
The National STEM Guitar Project, in partnership with NSF Advanced Technological Education (ATE) Centers with funding provided through a grant from The National Science Foundation (#1700531, #1304405, & #0903336), hosts innovative Guitar Building Institutes throughout the US. Five-day institutes, combined with additional instructional activities comprising 80 hours, provide middle, high school, and postsecondary faculty training on science, technology, engineering and math (STEM) applications as they relate to the guitar. The institutes present and teach participants hands-on, applied learning techniques to help engage students and spark excitement for learning STEM subject matter.
I was lucky. Went into to a small local music store and they had it for a long time and were trying to get rid of it quick. Got it for about $800. The previous Rick 12 I had (with narrow neck) I bought for $400, fixed broken nut, then sold to West LA Music for $750 cash so I could get the Petty model. Transactions that were definitely worth it at the time.
Across the United States, there are increasing concerns from businesses about the supply of science, technology, engineering, and mathematics trained workers. Although science and math test scores in the US are among the lowest around the world, the US educational system is in the process of revitalizing the “hands on” learning techniques as a way to enhance the participation and success of students. Our project meets the needs of applied learning with the flexibility of being modular in the classroom.
A lot of amateur guitar players are tempted by the ‘cut’ of a high treble sound that gives their notes definition above the cacophony of the rest of the band. They become so accustomed to this sound that they lose sensitivity to its harshness. Treble becomes the ultimate weapon in their arsenal for the volume war, but to the listener, all they hear is a headache, aka bad tone.

WARTUNG Herzlichen Glückwunsch und vielen Dank dafür, dass Sie sich für ein Produkt von Ibanez entschieden haben. Ibanez legt bei seinen Produkten die höchsten Standards an. Alle Ibanez- Instrumente werden vor der Auslieferung unserer strengen Qualitätskontrolle unterzogen. In dieser Anleitung wollen wir beschreiben, wie Sie das Äußere Ihres Instruments pflegen und Ihre Gitarre in dem Zustand halten, wie sie bei Auslieferung ab Werk war.
Designed by Todd Langner (who also engineered the ADA MP-1), the Langner DCP-1 possesses somewhat of an infamous reputation. Very few know about it, but everyone who does, swears by it’s greatness. Built with much of the same blueprint as the Bogner Fish, the Langner features two independent channels with fully adjustable boost functions. Using five 12ax7a tubes, it’ll produce the glassiest cleans to the highest of high gain tones. Presets can be front panel selected or footswitched. If you’re into rare gear, this is the amp for you. Good luck finding one!
Later, around 1963, rebadged Guyatone and Teisco guitars appeared, both in the U.S. and a few in the U.K., also as Futuramas. That was the beginning of several years of Guyatone-made Kents. The Teiscos seemed to be part of the 1963-64 freshman-class only. After starting with an initial group of both Guyatone and Teisco guitars, the importer seemed to settle on Guyatone as a main supplier.
The dynamic mic’s strengths for close-miking constitute some of its weaknesses in distant-miking, and you’ll more likely want to use a ribbon or condenser mic for this job, if you have one. Distant miking really begins at 10″ to 12″ out, where many condenser and ribbon mics start to bloom. As a rough guide, start 12″ to 18″ from the speaker in order to record an electric guitar sound that is still pretty solid and direct, but captures some sense of air and space and natural room reverberation. You can aim the mic straight at the center of the speaker for a bright and detailed tone, as described in our close-miking techniques above, or move it around in the field, trying different direct and off-axis placements. Any position that achieves a desirable tone is valid, and you don’t have to remain on the same plane as the speaker itself. Moving the mic out adds more space to the sound (while potentially compounding phasing issues – see below). Raising the mic above the speaker and aiming it down slightly to fire toward the upper edge of the cone can let the sound bloom as it reaches the mic. In a room with a carpeted floor, you can position the mic lower to the ground (even below the speaker itself) to cut out some of the reflected sound. Positioned as such, an end-fire mic can be shooting either toward the amp on a plane that hovers above the floor or at an angle toward the speaker, while a side-fire mic can be aimed either way or fire straight at the ceiling with the amp sound washing over its capsule.
Bass chorus effects use a cycling, variable delay time that is short so that individual repetitions are not heard. The result is a thick, "swirling" sound that suggests multiple instruments playing in unison (chorus) that are slightly out of tune. Bass chorus effects were more common in the late 1980s, when manufacturers such as Peavey included chorus effects in its bass amplifiers. In the 1990s and 2000s, more sophisticated bass chorus effects devices were created which only apply the swirling chorus effect to the higher parts of the bass tone, leaving the instrument's low fundamental untouched.[5]
Electric guitars are fantastic fun — as long as you can hear them (and your neighbors can’t). That’s one drawback. Some kind of amplification is needed or software with a decent audio interface and headphones. It has to be said, too, that electric guitars are in one way much easier to play with their low string action. At the same time, the narrow fret boards require a higher level of skill to allow precise fingering and avoid inadvertently muting some strings. But hey, your dream is to be an electric guitar playing rock god, so shouldn’t you learn with one? I reckon there’s a better alternative.
CP = manufactured by ???; some speculation is that CP stands for Cort Plant or that models with this designation were made by a partnership of Cort and Peerless or perhaps even that it indicates production at Cort's Indonesian plant which is known as Cort PT (although this last possibility seems highly unlikely since the instruments are marked as "Made in Korea"). (2003–2008)
{ "thumbImageID": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Candy-Apple-Red/J46162000005000", "defaultDisplayName": "Fender American Professional Jazz Bass Rosewood Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Candy Apple Red", "sku": "sku:site51500000138957", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Candy-Apple-Red-1500000138957.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Candy-Apple-Red/J46162000005000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000030584", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-3-Color-Sunburst-1500000030584.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-3-Color-Sunburst/J46162000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51500000030587", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Olympic-White-1500000030587.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Olympic-White/J46162000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030585", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Sonic-Gray-1500000030585.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Sonic-Gray/J46162000004000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000030586", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Black-1500000030586.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Black/J46162000003000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The 1952 Les Paul featured two P-90 single coil pickups, and a one-piece, ‘trapeze’-style bridge and tailpiece, with strings that were fitted under (instead of over) a steel stop-bar.[note 3] The weight and the tonal characteristics of the Les Paul were largely due to the mahogany and maple construction: maple is a hard and quite heavy wood, but was restricted to a cap over somewhat lighter mahogany, to keep weight under control.[note 4] In addition, the early 1952 Les Pauls were never issued serial numbers, did not have bound bodies, and are considered by some as “LP Model prototypes”. However, the later 1952 Les Pauls were issued serial numbers and also came with bound bodies. Interestingly, the design scheme of some of these early models varied. For instance, some of the Les Pauls of this issue were fitted with black covered P90 pickups instead of the cream-colored plastic covers that are associated with this guitar, even today. Of note, these early models, nicknamed “Goldtops”, have begun to gain the interest of collectors, and subsequently, the associated nostalgic value of this instrument is increasing.[note 5]
The following effects are a step up from your basic overdrive, distortion and fuzz, with more specialized sounds. In this category, you’ll find pedals that include effects such as time delays or frequency modifications – things that go beyond changing the shape of a sound by also changing the pitch, rhythm or both. Others are simpler, but still offer enough tone-altering potential to set them apart from the basic pedals.
I have achieved my best results with this technique when miking resonant hollow-body guitars, getting the mic in as close as possible to the guitarist's picking hand. Large-diaphragm condensers, especially the Neumann U 87 and Manley Cardioid Reference tube mic, have proven superlative performers on big-box guitars such as the Gibson ES-175 (see photo on p. 114). The small-diaphragm Oktava MC 012 and medium-diaphragm Shure KSM32 have worked wonders on solid-body instruments, most notably on improvisational-guitarist Ron Thompson's seven-string custom axe.
An electric guitar is an expensive toy, so deciding who to buy it for is very important. Depending on the electric guitar’s purpose, its size and sound have to align with the player’s taste and goals. Profciency is also another deciding factor. If you are a beginner electric guitar player, the most important things to keep in mind is how easily you can play the electric guitar. What type of body style is suitable? What types of tones suits your tastes? These are the types of questions anyone should ask themselves when deciding who to buy an electric guitar for.
{ "thumbImageID": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black/J40048000002000", "defaultDisplayName": "Ernie Ball Music Man Cutlass Rosewood Fretboard Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Heritage Tobacco Burst", "sku": "sku:site51500000015290", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Heritage-Tobacco-Burst-1500000015290.gc", "skuImageId": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Heritage-Tobacco-Burst/J40048000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000015289", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,199.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black-1500000015289.gc", "skuImageId": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black/J40048000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
If ever there were a forensic investigation to identify the true biological father of punk rock guitar, all DNA evidence would point clearly to Johnny Ramone. The guitar style that people most associate with punk—briskly downpicked barre chords executed with blinding precision at breakneck tempos and marshaled in service of concise catchy song structures—is the invention, progeny and proud legacy of the man born John Cummings on Long Island, New York.
First we look at the design of the guitar: How does it look? What is the paintwork like? Any outstanding graphics or colors? What wood is the body, neck, and fretboard made from? How many frets are there and what size are they? What is the scale length? It’s also worth noting that the design is the most personal of all the ratings. For example, some people will love ESP’s eye-meltingly unique George Lynch Signature Kamakazi, while others will pretty much hate it. So the design ratings are very subjective!
Immediately you can see that this unit is on the larger side, measuring 25 inches (63.5 cm) across, and weighing about 11 lbs (5 kg). If you’re concerned about portability, we noticed one of the most purchased items together with the HD500X is this case, which comes highly recommended and will keep your multi-effects pedal safe during transit and storage. The Line 6 POD HD500X itself has superb build quality. It has a very nice metal chassis, and heavy duty construction. The build quality probably doesn't get much better than this in a multi-fx unit (we say it is a step above the Zoom G3X). We won’t spend a ton of time talking about the inputs/outputs and controls available on the Line 6 POD HD500X, since you can very easily discern that from photos of it. We will say that of all the multi-effects pedals on our top 5 list, this is the most robust. The inputs/outputs cover above and beyond what you probably need. You’ve got your basic inputs and outputs, USB 2.0 so you can use it as a USB interface and for DAW integration, MIDI in/out/thru, FX send and return, AUX input, balanced XLR outputs, integrated mic preamp, and more. In short, however you want to integrate the HD500X into your bedroom, music studio, or live setup, there’s a very good chance you’re covered.
Not sure I would recommend this for someone over 11 or 12 who is genuinely serious about learning, I probably would have skipped ahead to something larger. But if you are looking for a "toy" that really could inspire a child to develop a talent, this guitar is an ideal choice. One word of caution... the amp/guitar connectors are standard size so there is nothing stopping one from connecting it straight to a much more robust megawatt amp! For the price, five stars easy.
These two components work in tandem to influence tone and playability. The bridge is mounted to the lower portion of the guitar body. The strings are routed over it before terminating on the body or on a tailpiece. Bridges are designed to compensate for varying string lengths, gauges, and metals, ensuring that the strings remain in tune with each other. Bridges usually allow adjustment of the string's length to bring each string into tune along the entire length of the fretboard. This process is called intonation, and is an important part of setting up a guitar for optimal performance. Some bridges permit string height adjustments that affect the the ease with which the strings can be fretted, and is often referred to as the guitar's "action."
Bass effects that condition the sound, rather than changing its character are called "sound conditioners." Gain booster effects pedals and bass preamplifier pedals increase the gain (or volume) of the bass guitar signal. Bass preamplifiers for double basses are designed to match the impedance of piezoelectric pickups with the input impedance of bass amplifiers. Some double bass preamplifiers may also provide phantom power for powering condenser microphones and anti-feedback features such as a notch filter (see "Filter-based effects" section below).
{"product":{"id":"113884849","stock":"instock","price":"219.99","name":"Thunderbird IV Electric Bass Guitar","download":false,"sku_id":"113884849","checksum":"117352072023","rep_id":"site5113884849","displayId":"113884849","sku_display_id":"113884849","sku_rep_id":"site5113884849","gc_pro":false},"category":"Electric Bass","pageName":"product_detail","subcategory":"4 String Electric Bass","dept":"Bass"}
Reverb creates a sense of space, but it also increases the perception of distance. If you need something to appear at the front of a mix, a short, bright reverb may be more appropriate than a long, warm reverb, which will have the effect of pushing the sound into the background. If you need to make the reverb sound 'bigger', a pre-delay (a gap between the dry and wet signals) of up to 120ms can help to do this without pushing the sound too far back, or obscuring it.
Having got the technicalities out of the way, it's time to look at recording methods. The traditional method, and still the most satisfactory in many cases, is to mic up a really good amplifier, but where this isn't appropriate, we have a choice of physical modelling guitar preamplifiers, complete guitar/pickup/amp modelling systems using Roland's VG series of products, or the slightly lower-tech approach of using analogue guitar recording preamps (solid state or valve). The latest option is to plug the guitar directly into the computer and use a software plug-in to handle the amp and speaker modelling, but I'll start at the beginning with the miking options.

Believe it or not, Eddie Van Halen hadn’t even heard rock music until he and his family moved from the Netherlands to Pasadena California in 1967. After hearing Cream, he quickly abandoned piano and drums for the guitar, learning the instrument by picking licks off records by Eric Clapton, Led Zeppelin, Jimi Hendrix and Jeff Beck. These influences were merely a springboard, though. Eddie was quickly able to put his own mark on everything he played.

In 2017, Slash was named Gibson Brands' first Global Brand Ambassador. And to celebrate, Slash has designed his first Signature Firebird for Epiphone! Slash's Limited Edition Firebird features the classic Firebird profile that has gone virtually unchanged since its debut in 1963 and is made with a AAA Flame Maple top and a 3-piece Mahogany body in a Translucent Black finish chosen by Slash.
Despite starting life in Turkey in 1873, Epiphone is actually one of America’s oldest and best-loved musical instrument producers, having moved to this side of the Atlantic in 1903. Although the brand had been making acoustic guitars since 1928, Epiphone was acquired by Gibson in 1957 and soon began producing wallet-friendly versions of Gibson’s most famous models.
Engl is not particularly famous among US guitarists, and even veterans in the field might be unfamiliar with this hard-to-pronounce name. A good shorthand to give you an idea of what they’re about is to make a mental list of the features most readily associated with German products: good manufacturing quality, reliability, an adequate level of innovation (but only when needed) and higher than average performance.
I was at a friends house and he had a couple of his guitar playing buddies over. We got to talking about guitar repair and setups and such. Then one the guys said “the guy I use is the ever...”, and I was all like, “yeah I’m sure the guy you use is great, but the guy I know is better”. This went on, back and forth for a few minutes, when he blurted out, “I use the Cigainero brothers...”. I said “cool, me too” See More
Now, before you buy a brand new electric guitar, it is a good idea to pause and think about the purpose that you are buying it for. Do you just want to learn from it? Maybe you will want to upgrade it after a year or two when you become a more skilled guitarist? If this is the case, go with the most basic or affordable guitar. You don’t need anything fancy yet.
Most of the modern electric guitars are provided with several tones and volume controlling circuits which helps in controlling the string vibration and thus the electrical charge produced. These adjustments are mainly done with the help of knobs provided on the neck of the guitar. Thus, the more the number of electrical circuits, the better the guitar can be adjusted for different sounds.
Great website and very informative on readers experiences with Martin guitars. My 1995 Martin HD 35 has been nothing but a problem child since purchased new. The truss rod is frozen and the low e is fully 4/32 above the fret board at the 12th fret..nearly impossible to play fingerstyle. I bought a pak of new bone saddle material from the Martin 1833 shop and lowered it to playable height by making a new saddle…easier to play but considerable difference in tone experienced. String angle at the bridge changed I guess the tonal quality.
Chorus pedals actually make your guitar sound like there are a variety of different guitarists playing the same thing that you are playing, but with a different guitar and slightly out of time with you. This effect makes everything you play sound a little bit ‘warbly’ and thickens up your guitar or bass lines. We recommend experimenting with these as you can use them subtly to add weight to your sound or as a full-blown effect that completely takes over your signal.
For subtle modulation just set every knob at about 11 o'clock. You'll get a thin, shimmering layer over your acoustic guitar's tone that doesn't drown out the natural resonance of the instrument. The pedal doesn't boost your signal or add any kind of volume. All you'll hear is a clear, simple effect. Additionally, the CH-1's two stereo outputs allow you to easily split your signal between two amplification sources. Simply plug your primary source into output A (mono) and the secondary source into output B.
A noise gate allows a signal to pass through only when the signal's intensity is above a set threshold, which opens the gate. If the signal falls below the threshold, the gate closes, and no signal is allowed to pass. A noise gate can be used to control noise. When the level of the 'signal' is above the level of the 'noise', the threshold is set above the level of the 'noise' so that the gate is closed when there is no 'signal'. A noise gate does not remove noise from the signal: when the gate is open, both the signal and the noise will pass through.

Dorado instruments are of decent quality, but are often found at slightly inflated asking prices due to the attachment of the Gretsch name. Remember, these are 1970s Japanese guitars imported in by Gretsch during their phase of Baldwin ownership! Dorados are sometimes rightly priced between $125 to $175; but many times they are tagged at prices double that. Of course, what a guitar is tagged at and what it sells at (cash talks, baby!) are always two different animals.
In the Guitar Setup course, the third DVD is devoted to acoustic guitar setup. Acoustics are very, very different than electric guitars, when you get right down into the mechanics of them, and as such they truly do need a section of their own in any guitar setup guide. You’ll learn how to setup the action and intonation properly on your acoustic, as well as many other tips and tricks that will help you keep it in top working order.
An amazing electric guitar player pack that is suitable for use by beginners. It has a mahogany body, with its fret board having been made from rosewood. The neck is also made from mahogany. Most interestingly, it comes with passive fienzo pickups, and an exclusive guitar player pack with gig bags, strap, cord, tuner, and an instructional DVD. It is well design to assist the beginner to better access the frets and practice through to perfection. Prices range from INR 12,650. Find it on the link below:
This has changed with the introduction of the 2018 Gibson Les Paul Studio, which now has white neck binding. Apart from this cosmetic addition, there are other new features. It has cryogenically treated frets, which means the fret wires have been exposed to extreme cold before they were fitted on the guitar’s rosewood fingerboard. The result? More durable frets that don’t wear out as quickly as regular frets.
The 2008 Les Paul Standard is outfitted with locking tuners from Grover, which deliver ease of use through a standard tuner and positive locking mechanism that securely locks each string in place. Simply insert each string through the string hole, turn the dial on the bottom of the tuner to lock the string, and begin tuning. Each string can be tuned to pitch in less than one complete revolution of the post. These Grover machine heads feature completely sealed components with an improved 18:1 tuning ratio.
I have a 12-string Lyle in really good shape. Bought as a b-day present from me back in late 1970's from a pawn shop. I need to take it to a luthier to have it set up better, but it sounds really good. Just right now the action is a little high, but not that much wear. For a long time, I put it away, finding it hard to chord as a relative newbie back then. But now, I am more than ready. It does say it was made in Korea ~ which makes it seem a little more rare. The sound is still great or maybe even better! Wish I knew what it was worth, but I hope the guy I find to set it up will know more.
Les Paul developed one of the first practical solid-bodied electrics made of wood, which he dubbed "The Log". He built the prototype himself -- possible the first practical solid-bodied electric -- in the late 1930s. In 1941, he approached Gibson about making it, Gibson, but they weren't initially interested. Meanwhile, Leo Fender had been independently been developing his own solid bodied guitar, which was released commercially as the Esquire in 1950. By then, lots of people were recording electric guitar.

Other early phase shifters used field effect transistors (FETs) to control each phasing stage in place of the light bulbs in the ’Vibe, and certainly later units employed opamps with variable resistors (six TL072 dual opamps or similar in the MXR Phase 100, for example). Electro-Harmonix’s sweet little Small Stone, on the other hand, has a more unusual design that employs five CA3094 type Operational Transconductance Amplifiers (OTAs). The results are similar, but subtly different. Many phasers—such as MXR’s Phase 45 and Phase 90, and E-H’s Small Stone—carry nothing but a speed control, plus a “Color” switch in the case of the latter. Others have Depth, Mix and Resonance controls. The latter appears on many units with internal feedback loops (the Small Stone and most phasers before it lack this circuitry), and allows the player tweak the degree to which the portion of the signal fed back enhances the frequency peaks.

Martin also periodically offers special models. Many of these have a limited production run, or begin as a limited-production guitar that sells well enough to become regularly produced. Many of these special models are designed with, endorsed by, and named after well-known guitarists such as Eric Clapton,Clarence White, Merle Haggard, Stephen Stills, Paul Simon, Arlo Guthrie andJohnny Cash. In 1997, Martin launched its “Women in Music” series, which was followed in 1998 by the Joan Baez Signature guitar, a replica of the 0-45 Baez began her career with.
Bought this to replace my Digitech RP 255 which I had better presets and found a little easier to setup- but I have every confidence this unit will give me sounds I like just as well- I already like the clean sound better, plus it is a much smaller and lighter unit which was one of my main goals. My pedal board has a GR33 guitar synth, a boost and a headphone amp. Those units and power supplies were getting too heavy.

If you do find yourself at a concert and there’s not a Fender onstage, there’s an exponential chance that there will be a Gibson – if not both. Getting their start as a small mandolin manufacturer in Kalamazoo, Michigan in 1902, the brand eventually went on to start building guitars, inventing the archtop style of guitar by using the same building techniques as violin manufacturers. In the 1930s, Gibson had made their first electric guitar, but it wouldn’t be until 1952 that the brand would unveil what is still their most popular and iconic guitar ever built: the Les Paul. Now based out of Nashville, Tennessee, Gibson’s storied history is littered with the presence of some of the greatest guitarists of all time, including B.B. King, Chuck Berry, Slash, Jimmy Page, Pete Townshend of the Who, and Angus Young of AC/DC.

The CX-12 is a 12-hole, 48-reed chromatic, uniquely designed with a one-piece plastic housing and a more ergonomic slide button. It is available in several keys including a tenor-C. The standard model is charcoal black in color, but a gold colored one is available in the key of C only.[42] A variant of the CX-12, the CX-12 Jazz, has slightly different outer body features for better ergonomics, a red and gold colored housing, and higher reed offsets which aid in better tone for jazz harmonica players.[43]
Electric guitars are capable of producing a multitude of different sounds, ranging from the purest cleans right through to saturated distortion and feedback. Many factors influence the final recorded sound; the type of guitar and amp, and any stompbox or rack-mounted effects used will shape the initial tone. The choice of microphone(s) and mic’ing techniques, too, along with any studio processing, will also contribute to the end result. Your playing style is also crucial; experiment by playing with fingers or a variety of plectrum gauges until you get the right attack. While most guitarists play with a pick, coins can also be used to produce interesting harmonic overtones – just ask Brian May or Billy Gibbons.

I wish both of them bankrupt and disappear from the face of the earth to give way for new innovative brands with better pricing towards beginner musicians. I don’t care they are made on the blueridge mountains of Tennase or the shanty town in Shanghai. If they cann’t make a guitar to the new musicians for their liking, tradition or not they are garbage.
The whole point of having a DIY guitar kit is to build a guitar that you like, so make sure that you get one with you're preferred shape and profile. Kits with classic guitar body shapes are the safest choice, as evidenced by their continued popularity in the market. But don't limit yourself with just the familiar, spend time looking at other designs to see if you're missing out on something cooler, something that better matches your personality.
The book discusses both tabs and notation which makes it easier to transition if you’ve been using the former. It covers a wide range of topics including scales and arpeggios. The approach the author takes is logically and accessible with plenty of examples and exercises to make it stick. The only downside is that there are no songs included in it.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst

I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.

The final stages of on-board sound-shaping circuitry are the volume control (potentiometer) and tone control (a low-pass filter which "rolls off" the treble frequencies). Where there are individual volume controls for different pickups, and where pickup signals can be combined, they would affect the timbre of the final sound by adjusting the balance between pickups from a straight 50:50.