Black trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
The electrified hollow body arch top was created so the guitar could compete with the volume of horns in the big bands of the 1930s. And they’ve evolved considerably since then, growing from fat jazz boxes with necks that meet the body at the 12th fret to nimble, thin-lined instruments with cutaways like the Gibson ES-125 and Epiphone Casino, which are experiencing a renaissance today. From the single blade pickup in Christian’s guitar, modern hollow bodies now sport all types of pickups as standard equipment: humbuckers, single-coils, piezo-electric and so on.

Here you will find a list of beginner guitar chords. These chords are very commonly used through many popular songs and so learning them is a great foundation for your guitar future. With the chords below you will be able to play thousands of songs, including most of your favourites. And once you have learnt these chords and the changes between them you will find it very easy to learn new chords and add them to your repertoire.

A small number of bass units do not fit into the "combo" amplifier, standalone amplifier or separate speaker cabinet categorization or typologies. Some bass amp combos have a removable amplifier. With the amplifier unit taken out of the combo cabinet, the user then has an easily portable amp head (which can be taken to a recording studio for use as a preamp, to lay down bass tracks) and a separate bass speaker cabinet, which could be used with another bass amp head. As well, some amp heads have a small built-in speaker which produces enough sound so that it can be used as a practice amp, so that the bassist can practice when she/he has the head, but not the speaker cabinet. This way, a bassist in a touring band could practice electric bass using her amp head, even if her speaker cabinets were still locked up in an equipment van.
Not all stompboxes and rackmounted electronic devices designed for musicians are effects. Strobe tuner and regular electronic tuner pedals indicate whether a guitar string is too sharp or flat.[105] Stompbox-format tuner pedals route the electric signal for the instrument through the unit via a 1/4" patch cable. These pedal-style tuners usually have an output so that the signal can be plugged into a guitar amp to produce sound. Rackmount power conditioner devices deliver a voltage of the proper level and characteristics to enable equipment to function properly (e.g., by providing transient impulse protection). A rackmounted wireless receiver unit is used to enable a guitarist or bassist to move around on stage without being connected to a cable. A footswitch pedal such as the "A/B" pedal routes a guitar signal to an amplifier or enables a performer to switch between two guitars, or between two amplifiers.
All electric guitar strings are made using steel, nickel, or other magnetically conductive metal alloys since they’re essential for transmitting string vibrations to the magnetic pickups. The type of plating or coating applied to the steel alloy has a significant impact on the strings’ sound. Here are some general tonal characteristics of the most common types of strings:
While modified four-stage phasers like the Uni-Vibe and other effects before it had sought to evoke a choral-like sound, the chorus pedal as we know it didn’t arrive until affordable short-delay chips became widely available in the late 1970s. This in itself implies that chorus is a type of delay, and indeed it is, but the sonic results of the ways in which these short delays are transformed lands the effect firmly in the modulation camp, so it’s easiest to consider it as such (the function of these delay chips will be explained in more detail in the Echo & Delay section down the road). IC-based chorus effects work in a manner very similar to flangers, detailed above. The main difference, put simply, is that the short delays used to create harmonically spaced notches and peaks in the frequency spectrum are manipulated to modulate more tightly above and below specific frequency ranges, rather than shifted to swoosh broadly up and down the entire spectrum. The result, and intention, is a sound like a group of singers or similar instruments, where some voices/strings inevitably waver slightly from those beside them, producing a quivering clash of harmonics that evokes space and dimension when used subtly. The effect is possibly best heard—as pure effect, at least—in stereo, and the nature of the beast lends itself readily to stereo outputs. The broad soundstage and Doppler-like movement a good stereo chorus can spread out before you between a pair of spaced amps or L-R headphones make it one of the most spacious, three-dimensional effects available, short of long delays or cavernous reverb settings.
I’d like to think that I am a little more forgiving of slight finish errors than most, so most of the horror stories surrounding Gibson QC do not bother me too much. After all, one area of the body where the sunburst color doesn't fade at EXACTLY the same point all the way around? That sounds more like middle aged guys trying to save face around their buddies after their wives saw the credit card bill the next month and made them take it back.
Speaker simulators are switchable filter sets designed to reproduce the EQ curves of a variety of speaker cabinet configurations (with varying degrees of success). The subsequent coloration is meant to replicate typical speaker sound and behavior, softening the harsh upper-midrange edges associated with amplifier distortion. Speaker simulator boxes are designed with direct  guitar-amp recording in mind, and are intended to remove the speaker cabinet and microphone link from the signal chain.

Every generation there's one guitar master whose touch can make a guitar purr; whose grasp of his skill is so complete that just by looking at the guitar, he knows her problem; and whose ears can pinpoint what your tone is lacking. They are legends. And the mystique that surrounds these guys is hard to penetrate. Swank is one of those guitar masters. "I think part of my mystique now is that I'm just flaky and don't return phone calls," he says. "It's not that I'm some kind of badass." Swank was first introduced to the business of guitar repairing when he saw another master's work. "I just thought it was a pretty noble pursuit."
Consider so-called “vintage” or “’50s-style” wiring, in which the tone pot and cap are connected to the middle lug of the volume pot rather than the usual third lug. Given the sheer number of posts the topic has amassed on guitar-geek sites, you’d think it was an earth-shaking option. Yeah, it’s a cool mod that I happen to dig, but really, the sonic benefit is modest: just a bit less loss of brightness when you dial down the volume.
The Epiphone G-400 features a mahogany body and neck and a rosewood fingerboard. It has Alnico Classic PRO™ pickups with coil-splitting on both pickups via a push/pull control on the pickups’ volume controls which gives you a lot of tonal variety. If you want to nail it like Angus Young, Eric Clapton in his Cream days or Tony Iommi from Black Sabbath, the PRO gives you the sound of a true SG without the vintage price tag.

The GuitarTricks instructors are working professional guitarist and great teachers. With more than 45 instructors you have plenty of choice to find the ones you like best. There is a structured, best practice, teaching approach to every lesson, song and the entire curriculum which beats the hap-hazard approach of picking free lessons on YouTube. I also like that the I can learn not just what something does but WHY it does it and how to apply it to other parts.
This guitar features two MP-90 pickups that can be switched on at the same time to produce sweet yet aggressive sounds. This guitar is mainly used to play country and indie music. This guitar has a radius of 9.5’’ and 22 medium jumbo frets for comfort and speed of play. It has a six saddle hard-tail bridge that allows precise settings and ease of adjusting string heights. The fingerboard is maple finished which makes for fast play. This guitar features three finishes sunburst, black transparent and vintage white.

The Ibanez Artcore line is a beautiful example of modern guitar manufacturing. Normally, hollow-body guitars, even those from Epiphone, provide interesting challenges to companies trying to produce axes on a mass scale, and thus they have to charge a higher dollar. The Artcore series provides buyers with an option to shell out a fraction of the price for a really impressive guitar. The AF55 is a fully hollow option that will make you think you should have paid double for it.
Swank spent more than 25 years perfecting his skills at various guitar shops across the DFW area, including Charley's Guitar Shop in Dallas, before striking out on his own. He's repaired Andy Timmons' guitar, Ray Wylie Hubbard's and Eric Clapton's. But Clapton's repair made a significant impact. "It's kind of funny story," he says. "His technician wanted to go shoot guns -- they're English and don't get to shoot guns in their country -- so they dumped these two guitars off on me." It didn't take him long, and he soon found himself carrying them back to Clapton's rehearsal. "It was kind of weird seeing all of these pale English guys sitting around eating barbecue and passing around Colt .45s." But Clapton allowed him to stay and watch him rehearse. It's a blessing few guitar masters receive.
"Soft clipping" gradually flattens the peaks of a signal which creates a number of higher harmonics which share a harmonic relationship with the original tone. "Hard clipping" flattens peaks abruptly, resulting in higher power in higher harmonics.[37] As clipping increases a tone input progressively begins to resemble a square wave, which has odd number harmonics. This is generally described as sounding "harsh".
Description: Body: Mahogany - Body Construction: Solid - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Headstock: 3+3 - Bridge: ABR-1 - Cutaway: Double - Hardware: Nickel, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - Guitar Features: Pickguard - String Instrument Finish: Various
Our site has a wealth of information about what goes into making a Taylor guitar and how to make this very important decision. We have guides for how to find the right fit for you. Learn about the subtle differences in shapes and styles. Delve into different types of woods and construction, which are vital to the flavor and tone of an acoustic. Explore the Taylor line by series to find the look and style you want for your instrument.

The solid state amp isn’t really new either, but it only came into its own following William Shockley’s world-changing invention, the transistor. Its use for the audio circuitry allows the amp to be more adaptable and easier to tune, but despite innovations in recent years, the overdrive of solid state amps isn’t yet on par with what a tube can offer, and only a few manufacturers can boast of products that come close to sounding as clean as a tube amp.
Lastly, Capacitors. Now this one is a vast subject matter to cover as there is so much debate about which is the 'best', which is the most 'vintage correct' etc. If you're a member of any guitar forum, I'm sure you've encountered many a thread about this too. There's an awful lot of cork sniffing about this subject, it's pretty bad! but I'm going to keep it as civilized as I can sticking to facts and my findings/experiences.

Across the United States, there are increasing concerns from businesses about the supply of science, technology, engineering, and mathematics trained workers. Although science and math test scores in the US are among the lowest around the world, the US educational system is in the process of revitalizing the “hands on” learning techniques as a way to enhance the participation and success of students. Our project meets the needs of applied learning with the flexibility of being modular in the classroom.


The Deluxe was among the “new” 1968 Les Pauls. This model featured “mini-humbuckers”, also known as “New York” humbuckers, and did not initially prove popular. The mini-humbucker pickup fit into the pre-carved P-90 pickup cavity using an adaptor ring developed by Gibson (actually just a cut-out P90 pickup cover) in order to use a supply ofEpiphone mini-humbuckers left over from when Gibson moved Epiphone production to Japan. The DeLuxe was introduced in late 1968 and helped to standardize production among Gibson’s US-built Les Pauls. The first incarnation of the Deluxe featured a one-piece body and slim three-piece neck in late 1968. The “pancake” body (thin layer of maple on top of two layers of Honduran mahogany) came later in 1969. In late 1969, a small “volute” was added. 1969 Deluxes feature the Gibson logo devoid of the dot over the “i” in Gibson. By late 1969/early 1970, the dot over the “i” had returned, plus a “Made In USA” stamp on the back of the headstock. The Deluxe could be special ordered with full-size Humbucker T-Top pickups, these full size versions of the Deluxe were “Standard” spec. They were also available with “Gibson” embossed pickups in 1972 only and considered rare, as only 9 were produced. David Bowie Can be seen playing one of the 1972 “Standards” in his 1972 release Jean Genie video. By 1975, the neck construction was changed from mahogany to maple, until the early 1980s, when the construction was returned to mahogany. The body changed back to solid mahogany from the pancake design in late 1976 or early 1977. Inte reintroduced rest in this particular Les Paul model was so low that in 1985, Gibson canceled the line. However, in 2005, the Deluxe was with more popularity due to its association with Pete Townshend [1] and Thin Lizzy.

Well, sanding the bridge isn't really a standard procedure, haha. Only, to be able to get the (in my case adjustable) saddle low enough without the strings hitting the bridge I had to sand it down. This Landola is an old, but not particularly valuable guitar, so I decided to try that (and it had been severly damaged to begin with, I bought it like that just to have a go at trying to repair it)


Before Gruhn Guitars puts out any of our fine instruments for sale, they go through our repair shop to get them ready to play. Some older instruments require extensive repairs and restoration, while others just need new strings and basic setup. But every guitar, mandolin and banjo has to meet the high standards of the repair crew before it's released for sale. Our repair staff has over 75 years combined experience repairing, restoring, building and designing guitars.
Gibson 2012 SG Special '70s Tribute Electric Guitar, Left-Handed (with Gig Bag)   New from$649.00In Stockor 12 payments of $54.09 FREE 2-DAY SHIPPING Gibson 2017 SG Faded Electric Guitar, Left-Handed (with Gig Bag)   New from$659.00In Stockor 12 payments of $54.92 FREE 2-DAY SHIPPING Gibson 2017 Les Paul Standard Electric Guitar, Left Handed (with Case)   New from$2,299.00In Stockor 12 payments of $191.59 Free Ground Shipping Gibson 2019 LP Junior Tribute DC Electric Guitar, Left Handed, (with Gig Bag)   New from$799.00In Stockor 12 payments of $66.59 Free Ground Shipping See All Left-Handed Electric Guitars
PONTE NON TREMOLO Per cambiare le corde, infilare le corde nuove negli occhielli di guida sul retro della chitarra e posizionarle in seguito sopra la selletta. È possibile regolare l'intonazione spostando la selletta in avanti o indietro utilizzando un cacciavite a testa Phillips (+) sulla vite di regolazione dell'intonazione nella parte posteriore del ponte.
Many modern processors have such great presets you'll never need to get delve any further to create your own. However, almost all units with presets allow you to easily create your own favorite presets. You can start with a factory preset, tweak the sounds to your taste, then save it in your own location to be recalled at the touch of a button while you're playing.
Silvertone starter pack is incredibly hard to beat. The candy blue finish gives the guitar a gorgeous aesthetic that looks fully professional. The pickup selector has 5 positions, and there are two tone knobs to give even more control over the sound. Stratocaster fans will love this guitar! Also included in the set is a gig bag, small Silvertone amp, strap, 5 picks, Allan wrenches, strings, a clip-on tuner, and a tremolo bar.
Legend has it that funkadelic's "Maggot Brain," the 10-minute solo that turned the late Eddie Hazel into an instant guitar icon, was born when George Clinton told him to imagine hearing his mother just died – and then learning that she was, in fact, alive. Hazel, who died of liver failure in 1992 at age 42, brought a thrilling mix of lysergic vision and groove power to all of his work, inspiring followers like J Mascis, Mike McCready and Lenny Kravitz. "That solo – Lord have mercy!" says Kravitz of "Maggot Brain." "He was absolutely stunning."
ok thank you so much! Unfortunately, it’s not as loud as the other single coils of my strat. I tried splitting to the other coil but doesn’t split. I followed the wiring diagram bit by bit. =( Thank you so much for responding right away. I’m a session musician here in our country and this is actually my first time to mod my guitar. Thank you so much!
If, like me, you have a short fuse, you might find yourself cursing to yourself when unable to nail something on guitar. Indeed, you might get so frustrated that you feel like, literally, nailing something into the guitar. If you do get to this point, it's because you're trying to move too far, too quickly. Your mind and fingers will struggle to keep up with your expectations if you're too ambitious or impatient.
This book teaches you how to visualize the notes, which will lead quickly to remembering them. Once you know where the notes are, forming chords becomes easier, which leads to fluid playing in any position. At the very least, if you can identify your root notes, you can bail yourself out of trouble at any time. That skill for resolution serves you in improvisation and the random jams that will provide much of your growth.
Never buy a guitar for its looks alone. You must buy a guitar only once you have started learning and know your fingerstyle and the genre of songs you will be playing. Most of the guitars last for more than a decade. This is the reason, you must keep all these tips in mind before buying a guitar. Look for the style of your playing before you buy a guitar. A few guitars have a thicker neck which may or may not be comfortable to you. In each brand of guitars, different layouts and designs are available. Look for the series and the design that provide you comfort while playing the guitar.
Electric guitars are full of options, with various pickups, bridges, fret sizes, neck radii, tone woods, tuners and so on all having an impact on how an instrument plays and sounds. But stripping things down to the absolute basics, there are three types of electric guitars: solid bodies, hollow bodies and semi-hollow bodies. And they’re ideally suited for different playing approaches.
{ "thumbImageID": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "defaultDisplayName": "Ibanez V70CE Acoustic-Electric Cutaway Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Violin Sunburst", "sku": "sku:site51418660054264", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Ibanez/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst-1418660054264.gc", "skuImageId": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000-00-60x60.jpg", "imgAlt": "" } ] }
The Martin DSR2 also comes equipped with built-in Fishman Sonitone electronics, which features discrete soundhole mounted controls, allowing for stage-ready performance without having to drill excessive holes on the side of the body. With its continuesly high rating and incredible value for money, the Martin DSR2 should be at the top of your list when you're looking for an acoustic-electric guitar in this price range.

The OM-28 E Retro is one of the more recent guitars to come from Martin's OM line, and it is the consummate '30s era style acoustic guitar. The company took their time to carefully replicate vintage OM-28 guitars, from the aged solid sitka spruce top and solid East Indian Rosewood back & sides, down to the smallest appointments - resulting in a guitar that not only sounds amazing, but looks museum-level amazing as well.
Ovation Guitars proudly welcomes home legendary artist Richie Sambora with the launch of two new signature guitars benefitting youth music programs. The famed Bon Jovi songwriter/guitarist and 2018 Rock n’ Roll Hall of Fame inductee will donate royalties from the sales of the all-new Richie Sambora Signature Series Elite Double Neck guitar to the non-profit organization Notes for Notes which builds, equips, and staffs after-school recording studios in Boys & Girls Clubs after school facilities across the United States for youth to explore, create and record music for free.

To repair your guitar’s body, glue in any broken wings. Also, repair strap buttons that have come out and bridge holes that have been stripped by putting glue on a toothpick and applying it to the holes. When the glue is dry, you can re-insert the strap buttons or re-thread the bridge holes. You can use the same technique to repair bolt-on holes if the screw holes are stripped or are larger than the threads. If the holes are too large, just leave enough toothpicks glued into the hole to take up the extra space before you re-thread the screw.
Hi everyone! I have a quick question regarding string action. I have just gotten my 2003 Standard set up a few months ago, but I am having trouble with how low the action is; strings slip off of my fingers during bending now. If I just turn the screws on the Tune-O-Matic bridge to heighten the action a little bit, without touching or adjusting the truss rod, individual saddles, or tailpiece, will that screw up my intonation?

Having got the technicalities out of the way, it's time to look at recording methods. The traditional method, and still the most satisfactory in many cases, is to mic up a really good amplifier, but where this isn't appropriate, we have a choice of physical modelling guitar preamplifiers, complete guitar/pickup/amp modelling systems using Roland's VG series of products, or the slightly lower-tech approach of using analogue guitar recording preamps (solid state or valve). The latest option is to plug the guitar directly into the computer and use a software plug-in to handle the amp and speaker modelling, but I'll start at the beginning with the miking options.
The movement to all-transistor amplifiers probably followed hot on the heels of the hybrid amps of 1968. The 1971 Univox catalog features a new, updated line of tube amps, but also has a little offset-printed flyer showing the Univox A Group of solidstate amps, which probably debuted a year or two before. These had black tolex-covered cabinets with vinyl handles, black grillcloths surrounded by white beading, and, on some, corner protectors. On amps with front-mounted controls, the logo had changed to wide, block, all-caps lettering printed on a metal strip running across the top of the grillcloth just under the panel. Combo amps with this logo treatment included the U-150R and U-65RN. The U-150R ($177.50) offered 20 watts of power running through two 10″ speakers, with reverb and tremolo, three inputs, and six control knobs. The U-65RN ($110) had 15 watts, one 15″ speaker, reverb and tremolo, with three inputs and five knobs. Joining these was the UB-250 ($150), a piggyback bass amp with 20 watts, 15″ speaker cabinet, two inputs, volume and tone. The U-4100 Minimax ($299.50) was a bass combo amp with 100 watts pushed through a 15″ speaker. Controls were on the back, with two channels for bass and normal. This had a rectangular logo plate on the upper left corner of the grille, with block letters and a round bullet or target design.
Another factor that may need to be considered is the length of the speaker cable. Very long speaker cable runs may affect the performance of the system, either by causing line loss of power or by affecting the impedance. For best performance and highest wattage output with bass stacks or combos with extension speakers, bassists typically use the shortest possible speaker cable.

The 10.5mm string spacing allows for easy picking across strings, such as string skipping and hybrid picking. The snap and hold tremolo arm socket can makes it easy to load a tremolo arm, and the arm torque adjuster enables fine torque adjustment without any tools. The stud lock screws lock the stud bolts in place, for better tuning stability and resonance. The 2-point floating tremolo system allows for super smooth tremolo motion when either raising or lowering the pitch.


Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.

Mic orientation, or the angle of the mic in relation to the speaker, becomes more critical as the mic is moved closer to the amp. Pointing the mic at the center of the cone will yield more active highs and better transient detail but fewer lows. As you move the mic toward the outer rim of the speaker, maintaining a 90-degree angle with the grille cloth, the low frequencies gradually increase because of proximity effect and other factors, resulting in a sound that may be warmer, softer, or more powerful. Many engineers like to blend these complex characteristics by angling the mic between 30 and 60 degrees off-axis from the center of the speaker.


SOLD OUT: This guitar is very familiar to me as I have had other guitars from another Famous Japanese guitar maker That was known to make this very guitar already I believe this to have been made by those responsible for the Takamine or Mountain ands Tak made for Washburn import, needless to say this is a high quality Well built Japanese copy of the Martin D-19 and is Identical to the Takamine F320. This example was well crafted over 32 years ago making this a true vintage guitar based on the classic These were quite well constructed by any standard fit and finish is excellent typical of this era Japanese crafted and were made with very nice woods too... The top on this guitar is Solid Spruce and is nicely figured and the back sides and neck are all Mahogany, The fingerboard = bridge & head-stock front overlay is rosewood. This combination is know for some sweet mellow tone & good volume...this example is in above average vintage condition its finish still shines like glass and with only a few minor doinks and with its true 32+ years of well taken care of age its natural patina is very nice in deed. This guitar has the 1-11/16ths nut width it’s a comfortable medium profile neck and it plays with ease and has good action, neck is straight with correct relief and frets are still good at 88%. Tuners are original and are working well, no splits or cracks warps or twists or issues of that nature structural integrity is excellent. Volume is very good, tone is sweet, this makes for a very good playing guitar That sounds great and is very enjoyable all round for the player. Vintage tone! .. thanks for your interest if wanted you can contact Joe at jvguitars@gmail.com . .
I’m not sure if you’re right about Joe being wrong. My memory of exactly how tone controls are usually wired is kind of failing me, but I think I remember that what you’re saying would be true if the output was taken from the node connected to the capacitor, but it’s not–the output node is the node on the opposite end of the tone pot from the capacitor, unless I’m remembering wrong. I think that filter-characteristics of guitar tone circuits are easier to visualize if you imagine them as reacting to a current source. Meaning “a big resistor in series with a capacitor” reacts the same way that “a big resistor” does. Basically, current above the cutoff frequency is shunted to ground through the tone pot–so if the tone pot is high, very little percentage (compared to if it was just a capacitor) of this current gets shunted, whereas if the tone pot is low, a high percentage gets shunted.
I have an acoustic Decca and a brand new Fender acoustic. Not only is the Decca easier for me to play because I have tiny little doll hands, I think it would hold tune if I threw it out of a moving car. I put both the Fender and the Decca into storage for two years - I just got them out recently. The Fender popped the B string and took a good twenty minutes to tune. The Decca was *STILL* *IN* *TUNE*. Plans have changed; I am selling the Fender and keeping the Decca!
The Air Norton started out simply to be the Airbucker version of the Norton. DiMarzio thought it would make a distinctive-sounding bridge pickup with high-gain amps, but they soon discovered that it's a radically neat neck pickup, too. The tone is deep and warm, but not muddy. It's hot, but not distorted. It's even got cool harmonics, which are really unusual for a neck humbucker. The patented Air Norton magnetic structure reduces string-pull, so sustain is improved; and pick attack and dynamics are tremendously controllable and expressive. Combine the Air Norton with The Tone Zone in the bridge position for a perfect blend of power and tone.
While high action is a concern, I see more people on guitar forums who bought Authentics, including the 1941, who say the action and playability is “like butter” more than I see people mentioning high action being a problem. Also, a lot of players rarely go beyond the fifth fret without a capo, so they may not even notice if their 10th fret would seem high to some players.

Boutique pedals are designed by smaller, independent companies and are typically produced in limited quantities. Some may even be hand-made, with hand-soldered connections. These pedals are mainly distributed online or through mail-order, or sold in a few music stores.[98] They are often more expensive than mass-produced pedals[99] and offer higher-quality components, innovative designs, in-house-made knobs, and hand-painted artwork or etching. Some boutique companies focus on re-creating classic or vintage effects.[100][better source needed]


So essentially if you are looking for a thicker, higher output sound a humbucker will be a better fit for you. If however, you prefer a brighter, twangier tone a single coil will be best. If in doubt consider the guitar tones and styles of music you prefer e.g. Fender or Gibson and go with a similar style of guitar kit or even better grab yourself one of each.
This is an American brand of guitar that is available in India. It was created in the year 1873. After a few years, it was bought by Gibson Guitar Corporation. Epiphone has a compact non-cutaway body made entirely from laminated mahogany. The neck features smooth slim taper profile, fretboard made of rosewood and 20 frets. Epiphone guitars India price starts from 14,000 INR approximately. This is the brand of guitar that is nylon strung and offers highest standards in acoustic and electric guitars.
Power amp clipping is not the same thing as preamp/preamp tube clipping. Sending a power amp signal that is getting power amp clipping to a speaker can blow the speaker. Sending a preamp/preamp tube clipped signal through a speaker is not harmful. In practice, part of the "breaking up" amp sound, of a "cranked" amplifier, which is widely appreciated by hard rock, metal, punk and blues musicians, is a mix of preamp and power amp clipping. One of the benefits of using a separate components head system, in which a separate preamp and power amp are mounted in a rack, is that the bassist or bass tech can watch for the clipping warning LED on the power amp and lower the power amp volume, if necessary.
Sune, you should know that there is no "right" or "wrong" string gauge for any guitar - it's all based on what you prefer in terms of feel and tone. It's good to try different gauges at first to find out what fits you the best. All my guitars are tuned to a drop-C tuning with 11-50 gauge strings, and I've only come to that perfect balance for me after a bunch of experimentation.
I once had RARE rogue made in the early 90s, set up exactly like some of the best ibanez.s. Shark fin inllays, cool headstock, grover tuners, real floyd rose, etc, even the pickups used were authentic dimebuckers. Rogue made these to compete with bigger names and sold them for around $200, best guitar ever. I wish I had never sold it. I still have pics if anyone wants to see it.
As mentioned earlier, technically, magnetic pickups are small magnets with fine wire coils. These small magnets produce a magnetic field around them. When the metal strings of the guitar are strung by the user, a vibrating motion is generated inside this magnetic field which changes the magnetic flux of the field. According to the law of electromagnetism, this change in the magnetic flux produces an electric charge in the wire coil around the magnet.
If you love the sound of both acoustic and electric guitars, but you want to play both at the same time without draping one of each over your shoulder, then an Acoustic simulator pedal is ideal. These pedals take your guitar signal – regardless of what electric guitar you’re playing and make it sound like it’s an acoustic. These are often used by guitarists on stage who want to switch between an acoustic and electric guitar sound during a set or even the same song. The Boss AC-3 Acoustic Simulator is a great option.
Whether you are a beginner or the pro guitarist, choosing the right guitar brand is always essential. We are sure you will find your desired electric guitar from the range of best electric guitar brands we review above. If you want something different or best acoustic guitar brands, do share with us your thoughts in the comments below. Maybe we missed out something that you would remind us.
Straight away, we have to talk about how good this guitar sounds. Lots of low-end and mid-range acoustics tend to do one tonal area well, but the Martin DRS2 does an awesome job all round. It’s got deep, booming lows, while the highs remain nice and crisp. And of course, all of this is available acoustically or electrically in the dreadnought cutaway acousticelectric guitar.
While the company officially started by importing Spanish guitars, the Ibanez that we know really started in the late '60s when they began copying popular American guitar designs. As expected they got flak for their unofficial "lawsuit" copies, but this ultimately inspired the company to improve on existing designs and develop their own. Soon, virtuosos and big name guitarists like Steve Vai, Joe Satriani and more took notice, propelling the Ibanez brand into world wide renown. Now Ibanez is as big as it gets, with a wide variety of instruments, pedals, and amplifiers under their name. They make it to this list with the high ratings that their amps are receiving, headed by their Tube Screamer Amplifier series, which comes with the circuit of their popular boost/overdrive pedal built into the amplifier section.
The late ’36 Supro Amplifier was a spiffed-up version of the amp seen in the ’36 Bronson catalog, with a leatherette-type covering, leather handle, and enclosed, removable back. It now had an 8″ speaker, which spoke through a round grill with four bolts visible from the front. It’s impossible for me to tell from the illustration available to me, but this may still have had the resonator plate grill. The amp had four tubes and a “…special high fidelity circuit” that was “…rich in tone quality, and superfluous [sic!] in power.”


A perfect jammer or learner guitar, the Yamaha Pacifica is a super inexpensive electric guitar option. While you really shouldn’t use this electric to tour or play live, you can still hook it up to an amp and shred to your heart’s content. With a maple neck and rosewood fingerboard, this guitar actually has a great look to it while also providing for a comfortable neck and fast action. Expect to pay under $200 for this super-affordable, super-shreddable guitar.
Seller: bennick2013 (4) 100%, Location: Marietta, Georgia, Ships to: US, Item: 302905274242 Beautiful red body and maple neck looks great despite minor dings and scratches. Neck is straight and intonates well, action just fine with no divots or dead spots. Get it now before they become scarce and PLAY Condition: Used, Condition: Very Good, Brand: Lotus, MPN: Does Not Apply, String Configuration: 6 String, Body Type: Solid, Body Color: Red, Model: Strat, Model Year: ? See More
In the years since, Novak has built the instruments of choice for the likes of musicians like Charlie Hunter, Phillip De Gruy, Joe Louis Walker, and Henry Kaiser, to name a few. As time passed, he experimented with a variety of design ideas involving the use of non-traditional woods. At times, he was viewed as downright crazy from many a purist's standpoint. But he turned the other cheek, seeking the solutions that would satisfy his own personal playing requirements.
In one position, lug A and lug B are not connected (that is, the circuit is open). In the other, both lugs are connected (the circuit is closed). To use our seven-sound mod as an example: In one switching position, both lugs are not connected, so the neck pickup connected to the switch is not engaged. In the other position, both lugs are connected and the neck pickup is engaged.
I have a Kona Signature Acoustic with beautiful inlays in the wood. I believe the body is mahogany, decent resonant tone, and once I shimmed up the saddle bridge (which technically should have been replaced all together due to notching), sounds better than my Martin in many ways, where it better distributes the low, high, and mid-range tones. The Martin is too bassy sounding, but have ordered new bone bridge saddle, which hope it improves the cheap plastic one it came with...
In 1928, the Stromberg-Voisinet firm was the first company to sell an electric stringed instrument and amplifier package. However, musicians found that the amps had an "unsatisfactory tone and volume, [and] dependability problems", so the product did not sell well. Even though the Stromberg-Voisinet amp did not sell well, it still launched a new idea: a portable electric instrument amp with a speaker, all in an easily transported wooden cabinet. In 1929, Vega electrics launched a portable banjo amplifier. In 1932, Electro String Instruments and amplifier (this is not the same company as Stromberg Electro Instruments) introduced a guitar amp with "high output" and a "string driven magnetic pickup". Electro set out the standard template for combo amps: a wooden cabinet with the electronic amplifier mounted inside, and a convenient carrying handle to facilitate transporting the cabinet. In 1933, Vivi-Tone amp set-ups were used for live performances and radio shows. In 1934, Rickenbacker launched a similar combo amp that added metal corner protectors to keep the corners in good condition during transportation.[1]
I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!
For years, Seymour Duncan has provided guitarists with first-rate, handmade pickups and parts that are anything but stock. All of our products are designed and customized to suit the needs of specific musical styles and the musicians thereof. If you’ve got a guitar that doesn’t have a good-quality set of pickups and seems to lack that “extra something” in the tone department, investing in a set of pickups is your first stop.
Amps. When I first plug into an unfamiliar amp, I’ll start by setting all the tone controls to noon, and slowly raise the volume to a comfortable level. If the amp has a master volume, I set it for a good listening level and sweep the gain knob to explore the amp’s overdrive capabilities. I then make small tone tweaks by sweeping each pot up and down and listen to the range they work in, and how they affect the sound from different points in front of the amp.
I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...
Editor’s Note: My previous top choice, the Yamaha APX500iii, is now replaced with a newer and better model, the Yamaha APX600. What make’s it better, you ask? Well, there were some complaints regarding the previous model for having a lack of bass response and a “bland” sound when unplugged. Yamaha addresses this issue by changing the guitar’s bracing pattern, thus improving it’s overall sound response, making the APX600 a good choice for an acoustic-electric guitar. I suggest you go check this bad boy out.

The ’37 Spanish Guitar ($40, $5 for a case) illustrated in both the Sorkin and Grossman catalogs was basically the same as before, but now with plastic button tuners. This still had no f-holes. The previous basic Regal trapeze tail is now shown replaced by a stamped National trapeze. Indeed, despite the fact that catalog illustrations remain retouched versions of the old Regal-made guitars, these probably had Kay bodies and bolted-on National Dobro necks. Gone is the 1/4″ jack in favor of the screw-on microphone attachment. Finally, the new cylindrical-magnet pickup is offered as the “Mated Pick-Up.” This is significant both intrinsically and in light of later Supro features. This pickup is “mated,” i.e., attached by three screws, to the bridge saddle. The pickup sat inside the guitar contained in a wooden box. This was the beginning of National Dobro/Valco’s association with what would later be called the Bridge-Tone under-bridge pickup featured in many of its electric guitars.

We have arrived at the bottom of this extremely detailed buying guide and recommended guitar reviews. If you have made it here, congrats, you are officially a guitar know-it-all. Of course, the world of electric guitars is huge and there is still a lot to learn if you want to know more. But these are the basics. If you know these, you will be able to confidently pick the best electric guitars for yourself and be proud of it.
Jazz guitarists are not limited to single note improvisation. When working with accompaniment, chord solos are created by improvising chords (harmony) and melody simultaneously, usually in the upper register on strings 1,2,3 and 4. Wes Montgomery was noted for playing successive choruses in single notes, then octaves and finally a chord solo - this can be heard in his improvisation on the standard Lover Man (Oh, Where Can You Be?). When playing without accompaniment, jazz guitarists may create chord solos by playing bass, melody and chords, individually or simultaneously, on any or all strings - such as the work of Lenny Breau, Joe Pass, Martin Taylor and others. This technique can be also be incorporated into unaccompanied soloing: for instance Django Reinhardt's "improvisations", as he called his solo pieces.
Comes with hard case.This is the iconic Yamaha apx-6a. Made in the 1990s it has the iconic Yamaha AMF preamp/Eq system. This specimen is in overall faircondition for a guitar that is over 20 years old. It has normal scratches and other sings of wear. Shipping is free. Estimated arrival is 4-8 business days. A signature is usually required at the time of delivery.
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it.  Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low!  Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone.  I was so happy and asked him how much, he said it was easy so he didn't want take any money.  But i have him some coffee money and he said it was too much, I said it was for a week and he laughed.  My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems.  Steve is a hidden gem in the Boston guitar world.
Well built, beautiful rich sound and stays tuned. Made in Canada by the Godin family. The slim neck and close action makes it easy to play for those with smaller hands. I have the black Songsmith and will never part with it. Many of my friends and family thought I had spent $1000 to $1500 for it and were really surprised at the price under $400. Godin makes a nice case for it and all of their guitars for around $120.00. Definitely should be in the top 10 of best acoustic guitars!
With the PAC112V there is no harm going with the crowds. The Pacifica is a crowd-pleaser precisely because of its versatility – and so whilst it might have a very recognisable look, this electric gives you the opportunity to craft a sound that is entirely your own. The only drawback is its weight, which is not much of a drawback at all – particularly for this price.
wonderful feel of a small town, with caring people and the owner is amazing. He'll of a player too! Just got a gorgeous ESPN strat copy from him, he graciously showed me just how well of a strat it is... by playing it through a fender tweed tube amp. He even sang a little for me as he made my strat sing right along with him. Price was excellent, as are all his prices. See More

Beyond effects, some processors offer dozens of other capabilities including recording tools, rhythm track generators, plus sound models based on vintage amps, speaker cabinets, microphones, mic preamps, and much more. Many also have MIDI and USB connectors in addition to XLR and ¼” inputs and outputs, and are designed to work seamlessly with computer and iOS-based recording software and apps.


Unabashedly brute class, with typical German overbuilding, the Schallers shown here are the Incredible Hulk of the bunch (Fig. 17). At a hefty 272 grams, they have the might to get noticed when you fasten them to your axe. If you have a guitar with a tiny headstock, you’ll hear and feel a difference with the Schallers. Whether or not you like the change is subjective, and it depends on the makeup of the rest of your guitar.
@Ricardo – I recommend placing tuners as close to your original signal as possible at the beginning of your signal chain. An EQ pedal can be placed where you would like to filter your signal to the settings of the EQ which is technically at any point in your signal chain. Try the EQ in different locations and use the setting that works best for your.
It comes with two 6.5-inch speakers, delving out 100 W each for a total of 200. Now, the small woofer diameter might make these units work less-than-perfect for rendering stomach-churning bass noise, but ZT Amplifiers never intended for them to be used as such. Instead, they are supposed to deliver loud and clear enough sounds in the treble and mid ranges to make the guitarist hold its own even when a loud drummer is present.    
Double bass players playing in genres where a louder amplified tone (emphasizing the fundamental frequencies) is desired for the bass may be more likely to face the problem of audio feedback. Feedback for double bass generally manifests itself as a sharp, sudden high-volume "howling" sound that can damage loudspeakers. When acoustic instruments with resonant bodies are amplified with microphones and piezoelectric transducer pickups, the common approach used for amplified double basses, they are prone to have feedback problems. For acoustic bass guitars, soft plastic discs are available to block the sound hole, thus reducing feedback. Upright bass players sometimes use homemade foam or styrofoam inserts to fill in the "f" holes of the double bass, which can reduce feedback.
Description: Body: Mahogany - Top Wood: Maple - Curly - Neck Wood: Mahogany - Fingerboard: Ebony - Binding: Natural - Frets: 24, Medium - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge Construction: Ebony - Cutaway: Double - Hardware: Gold, Nickel, 2x Volume Control, 2x Tone Control, 3-Way Switch, Waverly Tuners - Pickups: Fralin P-90 - String Instrument Finish: Golden Natural, Winter Solstice, Hickory Burst, Aged Scotch, Faded Onyx - Made In: America
The first of these guitars was the Slash “Snakepit” Les Paul Standard, which was introduced by the Gibson Custom Shop in 1996. It has a transparent cranberry red finish over a flame maple top, a relief carving of the smoking snake graphic off the cover of Slash’s Snakepit‘s debut album, It’s Five O’Clock Somewhere, hand carved by Bruce J. Kunkel (owner of Kunkel Guitars – kunkelguitars.com), and a mother of pearl inlay of a cobra wrapped up the length of the ebony fretboard. Production was limited to 50, with Slash receiving the first four including the prototype, the only one with the carving on the body turned 90 degrees to be viewed right side up when displayed on a guitar stand. In 1998 Slash’s studio was broken into and his guitars were stolen, including the “Snakepit” prototype, so the Gibson Custom Shop built him a replica. These guitars are by far the rarest and most collectible of any of the Gibson Slash signature guitars, they sold for around $5,000 when new, the Hollywood Guitar Center was asking $20,000 for one in 2002.[citation needed] In 1997, Epiphone released a more affordable version of the “Snakepit” Les Paul, featuring a decal of the smoking snake logo and standard fretboard inlay.[32]
Keep focused on one goal at a time. For example, you could spend a week or two really getting to know 5 chords (why 5? Just pick a realistic number for that window of time and go with it!). Then, in the next week or two, practice changing between those chords using different combinations. In the next week, work on your strumming or picking, using the chords and chord change combinations you've learned.
Nitrocellulose lacquer is one of the great original-era Fender electric guitar finishes, and is still used today on select instruments. Thin, porous and delicate, it’s a premium finish prized for sonic qualities that let body woods breathe with their true tonal character, and for an appearance that ages and wears in a distinctive way appealing to many players.

If you’re a beginner you might not feel like you know enough to be able to test play different guitars, but play whatever you know and see if you notice any difference. If you only know a few chords, or even “Smoke on the Water”, then play that, it’s better than nothing! Don’t care about the staff hearing you play, they’re used to it and are probably just happy to have a potential customer.
Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.
The style of music you prefer will greatly dictate the type of guitar you want, so it is safest to stick to the guns (or axes) of your heroes. This way you can get a good and inspiring instrument even when you don't have thorough knowledge of guitar types. For experienced players, you owe it to yourself to understand the pros and cons of different guitar types better, before making big investments. But even then, your preferred style, and the recommendations of experts and professional guitar players that play them will be invaluable.
The main difference between analog and digital delays is delay time and note clarity. Digital delays can produce multi second delay times whereas the Deluxe Memory Man offered a delay time of 550ms. Digital delay units also introduced the tap tempo function which is extremely useful when using delay as a rhythmic tool. There are many excellent companies producing excellent delay units, certainly a ground breaker was the Line 6 DL4 which is still popular today. Although I love the sound of a true analog delay, the latest offerings from companies like TC Electronics and Strymon offer so many options and analog emulation options it makes it a tough sell to stick with analog delays.
1) Mic your guitar cabinet, running the mic signal into a simple mixer with your effect units patched in on effects sends and returns. Run the mixer into a power amp and full-range speakers, or powered full range monitor speakers (the “wet” cabinets), placed on either side of your dry cabinet. Set the effects units 100 percent wet and blend in the amount of effect you want into the wet cabs. Use a MIDI foot controller to change presets on the effects units, and add an expression pedal to control things like the output volume of the effect signal, or the feedback of a delay. For live applications, the soundman can mic your dry cabinet separately and take a stereo line-out signal from your mixer for the effects, panning the effected signal hard left and right in the PA. Guitarists such as Eric Johnson and Larry Carlton have used this approach.
Interesting cosmetics and great playing 4-string, Factory, but "custom re-built" Fretless bass. Appears to be re-finished. I had to buy this, as I recognized it immediately as a great "player", fretless bass. Adjustable P-J passive / dynamic pickup configuration sounds great. Separate volume and tone controls. Appears to be a "re-finish", in interesting "Fleck-Tone" gray paint. We think it is not the original finish, but it could be original. Someone did an incredible job it if is a re-fin, as the routed edges are perfectly finished and all parts had to have been removed with room made for the extra finish thickness. No worries about finger prints with this one. Un-bound, graphite? or other synthetic material, ebony black fingerboard  w/ dot inlay side markers on a solid mahogany neck with a 4-bolt neck joint. Black anodized tail piece perfect and rust-free. Finger board near new condition. Features 4 high quality, "sealed" tuning machines that work perfectly and hold tune. Plays and sounds great! Lots of fun. We have completely done a "Pro" set up on the guitar, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!). 34.5" scale length. Plays and sounds great. We also installed a new set of .040 "Round-wound" strings (yes I know flat wounds are more correct for fretless, but I prefer a bit more brightness. You are free to install flats once you own it). No case or bag included.
Solid body guitars were the next step in guitar development, with Leo Fender creating a modest instrument called the Broadcaster, which was then rebranded as the Telecaster. The Stratocaster came later and, in addition to the changes in the pickups, included contours in the body that made the guitar more streamlined and easier to play while standing up. Today, the Stratocaster is still the most iconic electric guitar shape; it’s associated with guitar wizard Jimi Hendrix, and many beginners end up with a Stratocaster-style guitar. Gibson introduced their own line of solid body guitars, the considerably swankier Les Paul.
The fretboard wood is used for the part where the frets are installed (front of the neck, where you press on the strings). All our fretboards are built from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.

Some people just need to play loud. It’s all they know and it’s all they want to know. If that’s the case, you might want to invest in some acoustic foam, and begin to soundproof your practice space. This will not only keep the sound level to a minimum for people in the other rooms, it will also represent the first step in transforming your space into a legitimate in-home studio.
Bull necked and heavily tattooed, Mike Ness is not the kind of guy you’d want to mess with. The Southern California guitarist, singer and songwriter has known good times and bad, punching his way out of a serious drug addiction in the mid Eighties. He has funneled these experiences into some of the most hard-hitting, plain-dealing rock songs to come out of the SoCal punk milieu. Ness launched Social Distortion in 1978.

Cool guitar! And you’re right— most Harmony guitars aren’t worth much, or in other words, they aren’t very collectible. That said, I wonder how many guitarists reading this column started out learning to play on a Harmony. There are hundreds of thousands of Harmony guitars out there, and though these are mostly entry-level instruments, they’re very much a part of guitar history.


The Boss ME-80 has two modes of operations. MEMORY mode lets you scroll through banks and presets more like a conventional multi-fx unit, and MANUAL mode is what we described earlier, where you can use this pedal as if you had a bunch of effects on a pedalboard and just start tweaking away. MANUAL mode is really where this unit shines, and makes it stand out from other multi-effect pedals. The presets are okay for getting a taste of it, but as is typical of presets many are over the top.
{ "thumbImageID": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "defaultDisplayName": "Fender Kurt Cobain Jaguar NOS Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst Rosewood Fingerboard", "sku": "sku:site51398177063833", "price": "1,224.99", "regularPrice": "1,224.99", "msrpPrice": "1,225.01", "priceVisibility": "1", "skuUrl": "/Fender/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard-1398177063833.gc", "skuImageId": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001-00-60x60.jpg", "imgAlt": "" } ] }
Since guitar players are automatically cool, that means cool guitar players are the coolest of the cool. In this issue, we exalt this elite class of cold—the players who even we would sell our wives and first born just to have some of their mojo rub off on us. Some of them are pioneers who paved a bold, daring path to define new styles of cool, while others are simply the kind of guitarists we want to be when we never grow up (which is part of being cool).
A variety of labels are used for level attenuation potentiometers (knobs) in a guitar amplifier and other guitar equipment. Electric guitars and basses have a volume control on the instrument that attenuates the signal from selected pickups. There may be two volume controls on an electric guitar or bass, wired in parallel to mix the signal levels from the neck and bridge pickups. Rolling back the guitar's volume control also changes the pickup's equalization or frequency response, which can provide pre-distortion equalization.
Check out a set of Elixir strings for yourself to hear and feel the difference.  The coating actually reduces string squeaks as well, providing a consistent sound for close miking and recording acoustic players.  The squeak of the finger over the round wound strings of an acoustic has always been an intrinsic part of the instrument, but hearing the guitar performed without such extra squeaking may change your mind.
It is an obvious fact that all those great guitarists must have had a humble beginning, having started with the best beginner guitar that suits them. Some of these artists started with guitars inherited from their parent, friends and/or relatives while others ordered theirs from guitar shops. If you are a newbie yet a guitar enthusiast and you are seeking to buy one among the best guitars for beginners, then there are tips and facts you will have to put into consideration.
Price guides can be used by both sellers and buyers. Sellers can generally use websites to get a ballpark figure on the value of their model of guitar or bass. They can then deduct for dings, scratches, and other injuries the guitar may have sustained in its lifetime. After-market modifications, such as new pickups or repair work, can increase the value of the guitar.

I have an old Montclair that my uncle modified. He told me that is a '52 but the info here dates it as '60-62 if I remember correctly. I just registered over at the forum, I thought you guys might get a kick out of seeing this guitar. My uncle stripped almost all the paint, there's a bit under the bottom of the neck just to show how it was. He added a hand carved bridge and custom binding on the backside. Also there are a few other unique mods. I really am interested to see what you think about this guitar. It is my main player and has been for years now, an amazing sounding punchy guitar. Hopefully I'll be able to post up some pics at the forum. Cheers! -Gabriel-


{ "thumbImageID": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "defaultDisplayName": "D'Angelico Excel Series EX-SS Semi-Hollowbody Electric Guitar with Black Hardware", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51438957997383", "price": "1,699.00", "regularPrice": "1,699.00", "msrpPrice": "2,629.99", "priceVisibility": "1", "skuUrl": "/DAngelico/Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black-1438957997383.gc", "skuImageId": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "brandName": "D'Angelico", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000-00-60x60.jpg", "imgAlt": "" } ] }
×