Finally, there was a mysterious lap – clearly Valco – which had no real National or Supro equivalents. This had tapered shoulders that swept down, wing-like, to the bottom, which had a little concave cutout. It was covered in ivory plastic on top, with black-lacquered sides. It had a rosewood ‘board with dot inlays. The pickup was the new exposed-pole single-coil with a bolt-on handrest, in front of narrow rectangular plate that held the saddle and attaching holes. Volume and tone knobs sat on little mini-plates on either of the strings. Another atypical downscale version of the National New Yorker was offered at the same time by Montgomery Ward.

The Stratocaster’s sleek, contoured body shape (officially referred to by Fender as the “Comfort Contour Body”[5][6] ) differed from the flat, slab-like design of the Telecaster. The Strat’s double cutaways allowed players easier access to higher positions on the neck.[7] The body’s recessed “beer gut” curve on the upper back, and a gradual chamfer at the front, where the player’s right arm rests, aided player’s comfort. The one-piece maple neck’s wider “dogleg”-style headstock contrasted with the very narrow Fender Telecaster’s headstock shape. The strings are anchored on a through-body pivot bridge attached with springs to a ‘claw’ in the tremolo cavity on the back of the guitar.
From its beginnings in 1970, Mesa/Boogie was beloved for its small-but-powerful Mark series amps; in 1989, however, the company decided to take its game to a new audience. The result was the Rectifier range of bigger and beefier Dual and Triple Rectifier amps. Since then, the Dual Rectifier has become one of the most popular rock amps on the planet.

Most of Peter, Paul and Mary’s work had splendid fingerstyle guitar work. My favorite is “Don’t Think Twice It’s Alright”. Paul Stookey also had some fine acoustic work going solo with stuff like “Sebastian” and “The Wedding Song”. “The Wedding Song” was supposedly “must learn” stuff for aspiring acoustic players in the 70’s (so they could play at their friends’ weddings).
Valve Amp or Solid State Amp? There's no right or wrong here, but, for tone alone, valve amps are way better. If you can afford a valve amp, just go ahead and buy one! They're the amps all the great bands ever used - from Beatles and Rolling Stones to Arctic Monkeys and Radiohead, 99% of all professional musicians simply prefer valve amps, like the Vox AC30 or Fender Hot Rod Deluxe III. But there's nothing wrong with solid state amps - the audience at a gig wouldn't be able to tell the difference.
It’s apparent right away that Acousticsamples knows how to sample a guitar, regardless if it’s acoustic or electric. All frets on all the string have, of course, been meticulously sampled and taken through a round of guitar techniques: slides, mutes, hammer-ons, pull-offs, staccatos, fret noises, and a plethora of other articulations — 53 different samples per fret/string.

Some emulator designs include switchable filters, enabling them to simulate open or closed-backed speaker cabinets, and can come very close to the sound of a close-miked amp, while ambience can be simulated using a reverb processor or plug-in. Even if the amp has a good spring reverb, a little additional digital ambience (mainly early reflections) will help create the illusion of the amplifier being recorded in a room.
It’s interesting to note that luthier Steve Klein introduced a guitar that got a lot of press in the early ’80s with a body virtually identical to the Ovation Breadwinner. According to Charles’ son (and future president of Kaman Corporation), Bill Kaman, Jr., Ovation considered “pointing this out” (i.e., legal action), but given its bad track record with solidbodies, figured it wasn’t worth the effort.
this is literally the worst piece of cow dung in the industry. I wouldn't even call it a guitar, it's so poorly made. Management, especially the CEO, don't care a bit about quality, the only thing that matters is their unrealistically high production numbers. the production processes are so archaic they are amateur, and they have the audacity to call it the worlds finest guitar. all of this stems from the CEO and his manic psychotic neurotic management style (he has to sign off on EVERYTHING: new hires, transfers within the company, promotions, raises, budgets, any funding for new parts or machines.

Great post a lot of useful information here I found this old acoustic guitar made by lotus I have never heard of this brand and have been trying to research it for about a month now and haven't gotten any closer to finding out the history of it if anyone know anything about them I'm all ears it has a tag on the inside model no. LW 65 or g5 lotus made in japan thanks in advance for any information I can get
What type of environment are you playing in? This is an important consideration when determining how many watts your amp should have. If you practice in an apartment surrounded by neighbors, a low wattage combo option is going to minimize potential conflicts. If you play live gigs in small club environments, it is possible to get by with as little as 50 watts. Larger venues require a larger amp that can move more air with its speaker. You should also take in to account how many other musicians you are playing with, and if there is a second guitarist, as you will want a tone cuts through the mix as opposed to getting buried.
{"pageName":"[gc] vintage: lyle","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"lyle","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Having a tuner on your pedal board is useful but these days I more often use a clip-on tuner, specifically the TC Electronic Polytune Clip (Buy at Amazon UK, Amazon US). I don't like the main signal to run through the tuner all the time if I can help it (I use the GigRig G2 switching system) but if you don't have that luxury, then look for a tuner with True Bypass like the TC Electronic Polytune 2 (Buy at Amazon UK, Amazon US) or use a Volume pedal that has a Tuner Output (many do these days!).
When guitarists who play jazz and other more complex styles improvise, they use scales, modes, and arpeggios associated with the chord progression. The must learn how to use scales (whole tone scale, chromatic scale, etc.) to solo over chord progressions. Soloists try to imbue melodic phrasing with the sense of natural breathing and legato phrasing used by players of other instruments. Jazz guitarists are influenced by trumpet, saxophone, and other horn players. Celtic fingerstyle players are influenced pipes and fiddles.
Hum cancelling: hum cancellation is caused by reverse polarity, reverse winding keeps a revrse polarity pickup in phase with a non reverse polarity pickup. To reverse the direction of the winding, simply swap wires, using hot as the ground and ground as the hot. Polarity can be changed on many pickups. If the pickup has bar magnets, simply flip them over. If the pickup uses alnico polepiece AND has the new plastic bobbins such as is common on Fenders, the polepieces can be pushed out with a screwdriver and reinserted "upside down". If the bobbin is fiber DO NOT attempt to flip the polepieces; the wire is wrapped directly around the polepieces and will almost certainly be damaged.
To make a long story short, I ordered from Amazon two Epiphone EJ-200SCE guitars, Color: one Natural, one Black and the Hummingbird Ephiphone. My wife liked the black one. I liked the natural one. We decided to compare the two side by side, and sent for both of them. Later, my wife changed her mind and liked the way the natural looked and sounded. I had just listened to the Andertons review "What ones are the best, the ten times more expensive J 200 Gibson or the ten times more expensive Hummingbird Gibson comparing to the similar Epiphone EJ-200SCE and the Hummingbird Epiphone.
In the fall of 1954, Daniel started production of solidbody guitars for Sears, under the Silvertone name. He also produced the same guitars under the Danelectro name, sold to other jobbers. These early models didn't have truss rods but had a 3/4" square aluminum tube beginning at the peghead and through the body to the bridge. The bodies were constructed of solid Poplar wood. The Silvertone models were covered with a dark maroon vinyl covering, while the Danelectro models were covered in a whitish tweed material. Both lines came with either 1 or 2 pickups, concealed under a baked melamine pickguard. Concentric stacked tone and volume knobs were used on the two pickup models only. Notably, when both pickups were used together, the tone was much stronger. This was due to wiring the pickups in series, instead of parallel like most other maker's two pickup guitars.
Being by nature rather sceptical, I have to admit to initially dismissing many of the recording methods in this article as 'studio snake oil', and because there was usually too little time during my own sessions to experiment with new ideas, I'd usually end up with an SM57 glued to the speaker grille by default. Taking the time out to trial the above techniques in the studio showed me quite how much I had been missing — not only much better raw recordings, but also tremendous extra flexibility at mixdown. But don't take it from me — listen to the audio examples for yourself and make up your own mind. If they don't expand your recording horizons, I'll eat my SM57...
The Gruhn Guitars repair shop has been world renowned for decades for its unrivaled expertise, skill, and respectful repair practices. Though our full-time staff of luthiers primarily focuses on repairing and restoring the instruments we make available for sale, beginning in 2016 we are also pleased to offer our repair services to loyal customers as an extended benefit of buying an instrument from Gruhn Guitars. Instruments purchased from Gruhn Guitars will be moved to the front of our repair queue and will be repaired at a discounted labor rate. As a sign of our appreciation for your business, Gruhn Guitars is here to help you for years to come to keep your instrument in the same prime working order as when it was listed for sale at the shop.
{ "thumbImageID": "Rocketeer-Electric-Guitar-Pack-Red-Burst/430930000003000", "defaultDisplayName": "Rogue Rocketeer Electric Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Red Burst", "sku": "sku:site51343059402611", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Red-Burst-1343059402611.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Red-Burst/430930000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Blue", "sku": "sku:site51275425410280", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Blue-1275425410280.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Blue/430930000004000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Burst", "sku": "sku:site51343059402609", "price": "109.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Wine-Burst-1343059402609.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Wine-Burst/430930000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275425410277", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-Electric-Guitar-Pack-Black-1275425410277.gc", "skuImageId": "Rocketeer-Electric-Guitar-Pack-Black/430930000001000", "brandName": "Rogue", "stickerDisplayText": "Clearance", "stickerClass": "", "condition": "Clearance", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

You might be playing guitar in a cramped garage or a poky bedroom – but it’ll sound like you’re gigging a cathedral when you step on a quality reverb pedal. Reverb brings a sense of space, depth and drama to even the most basic guitar parts, and as this video shows, few effects deliver more atmosphere for less effort. Using the BOSS RV-5 as our demo model, we’ll show you just how flexible reverb can be, running through key controls that adjust brightness, volume and more. Then, we’ll show how your playing can benefit from three different reverb types, whether that’s the vintage sound of spring reverb, the rock-club chug of room reverb, or the stadium-sized shimmer of hall reverb.
One full step down from Drop D. Utilized by bands like A Day to Remember, Biffy Clyro, Swallow the Sun in all their albums, The Ocean Collective in the Heliocentric / Anthropocentric albums, Slo Burn, Bullet for My Valentine, Evanescence, Children of Bodom, Disciple, Demon Hunter (Only on Demon Hunter), Avenged Sevenfold in "Radiant Eclipse", As I Lay Dying, Asking Alexandria on Reckless and Relentless, Rammstein, August Burns Red, Mastodon (on some songs), Helmet (since the Size Matters era), Converge, System of a Down, What Great Fangs, Black Stone Cherry, Chimaira (since The Impossibility of Reason), P.O.D., Ill Niño, Killswitch Engage, Deftones (in their album White Pony), Disturbed, Gojira (mostly on The Way of All Flesh & L'Enfant Sauvage), Metallica's St. Anger album, (except for the songs "Invisible Kid", which has one guitar in Drop G#, "Dirty Window", which is in Drop C#, and "The Unnamed Feeling", which has one guitar tuned to Drop A#/Bb), Weissglut, Atreyu, Darkest Hour, Breaking Benjamin (on some songs), Mudvayne, Born of Osiris (when using 6 string guitar) Periphery along with some alternate tunings, Cancer Bats, Slipknot (on their demo Mate. Feed. Kill. Repeat.), Zakk Wylde, Escape the Fate, and Skillet, Nirvana on their Bleach album, Porcupine Tree on the songs Anesthetize and Cheating the Polygraph.
This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.

It’s interesting to note that luthier Steve Klein introduced a guitar that got a lot of press in the early ’80s with a body virtually identical to the Ovation Breadwinner. According to Charles’ son (and future president of Kaman Corporation), Bill Kaman, Jr., Ovation considered “pointing this out” (i.e., legal action), but given its bad track record with solidbodies, figured it wasn’t worth the effort.

Leo Fender didn’t know how to play guitar. The inventor of the famous guitar brand, which includes the Telecaster and Stratocaster models (favored by Kurt Cobain and Jimi Hendrix), never learned how to play his own instrument. Fender began as an accountant with a knack for repairing radios, later turning that hobby into a full-time electronics operation. The highly versatile Telecaster, which he developed in 1950, became the first mass-produced solid-body electric guitar.
The Suspended Chime has two powerful effects in one pedal - chorus and chorus/delay. The Suspended Chime features a blend knob which allows you to go from subtle to lush chorus effect in either set up. Using the selector switch, you can add a 190 millisecond delay to the chorus introducing special depth to your tone. Varying the dry/wet mix can fatten your rhythms or produce a shimmering 12-string sound. The Suspended Chime kit comes equipped with an LED indicator and industry standard 9 volt center negative power jack. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All effects pedals operate on a 9V battery.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Hauptfeder Anschlag Tremoloblock Anschlagstab Bei richtig gestimmter Gitarre stellen Sie die Hauptfeder ein, um sicherzustellen, dass Anschlagstab den Tremoloblock und Anschlag berührt. Wenn der Anschlagstab nicht den Tremoloblock und Anschlag berührt, stellen Sie die Hauptfeder- Einstellschraube ein, bis Kontakt hergestellt ist.
Unicord, a gear distributor in the early ‘60s working out of New York, was the first iteration of Univox. When it acquired the Amplifier Corporation of America, or ACA, sometime in the early-to-mid ‘60s, it began to market tube amps that carried the name “Univox.” However, there are no reference materials to be found – at least in the annals of the internet – that detail these earliest Univox amps.
Our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod. You may bring your brand new guitar in your Local Guitar Shop for proper setup and adjustment of the truss rod.

It’s important to remember that these setups are not set rules that must be followed.  You can get a variety of unique sounds by placing your effects in unorthodox locations.  It’s common to run into that special sound that came about as a ‘happy accident’ when setting up your effects.  Using these suggestions, you can build up your own pedalboard to suit your individual taste.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=155.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prod361014, MSRPRange=false, enablePDPColorOption=false, showBrandNameWithProduct=true, restockStartAmount=null, priceVisibility=1, listPrice=155.0, salePrice=155.0, isOnSale=false, showMSRP=true, restockCount=0}
The lower portion is reserved for two footswitches – each for one of two available effects. It’s a busy stompbox, that’s for sure. However, the versatility it offers is hard to top, and the tone quality is definitely on a high level. Depending on how serious you are about your reverb, Mooer TVR1 Shimverb Pro (click for full review) can be a real force multiplier if used correctly.
Daron Malakian (b. 1975) is the lead guitarist for System of a Down. During the System of a Down era, Daron played IC200's and IC300's on stage. During the Toxicity era, Malakian played a variation of the Ibanez Iceman ICX, with custom artwork designed by his father, then a special edition "DMM1" was released by Ibanez. The DMM1 featured more artwork by Malakian's father, Vartan Malakian (b. 1947). After using Gibson guitars for 5 years, Daron switched back to Ibanez and began using an Iceman again.
Am I missing something? Few MIDI artists can document the finest details of legato expressed by some human performers, but such nuance is within the scope of current notational languages. If no human can or will produce such detailed documentation of existing performances, computational machines can, if not now, soon -- unless the inexorable march toward AI that can pass the Turing test is more exorable that it might appear.
I think for somebody reasonable, the right answer would be that yes, it has an effect on the tone of the guitar and the notes coming off the strings, but not nearly as much as other factors in the design of the guitar. If you think I'm wrong then you should read more about the overtone series, the physics of sound, difference tones, and how sounds interact both as vibrations moving through air, and digitally as numbers in a computer. It's just not as simple as to say wood doesn't have a magnetic field so therefore it can't possibly affect the tone. It's true that much of what we hear is a result of the ear-brain axis, but there are also many fundamentally measurable physical properties of sound as it occurs over time (as all sounds do) that can easily explain why different types or shapes of wood could have a subtle but real effect on the tone.
Tone woods only effect acoustic or hollowbodys. The more dense wood harder tighter grained woods along with steep pitched saddle to stop string angle increases sustain.research labs experimented with marble body's and had tremendous sustain.also effecting sustain is type of bolt on set or thru. A bolt on May have equal sustain to a set if the thickness of body at bolt joint is made thicker but thru are best all have give and takes. Thru are less adjustable and limit repairs. Bolt on offer more adjustment. Set necks can be replaced or reset but cost more to do so. Thick heavy gibson let Pauls are known for the sustain.but endurance limited by heavy weight. It's all matter of choice. Buy usa or if not available japan. Stay away from Chinese or Korean they are bottom feeders
If you decide to choose a guitar, amplifier and accessories separately, consider spending more on the guitar than the amplifier. A better guitar will often suit a player’s needs longer, and a less expensive amp will be fine for early practicing sessions. If the player decides to upgrade down the road, often they may only need to upgrade the amplifier and not their entire setup.
In the 1980s, digital rackmount units began replacing stompboxes as the effects format of choice. Often musicians would record "dry", unaltered tracks in the studio and effects would be added in post-production. The success of Nirvana's 1991 album Nevermind helped to re-ignite interest in stompboxes. Some grunge guitarists would chain several fuzz pedals together and plug them into a tube amplifier.[47] Throughout the 1990s, musicians committed to a "lo-fi" aesthetic such as J Mascis of Dinosaur Jr., Stephen Malkmus of Pavement and Robert Pollard of Guided by Voices continued to use analog effects pedals.[48]
This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.
{"pageName":"[gc] vintage: kay","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
For me, the hardest part of mixing is getting the vocals to sit properly. There are a lot of tricks you can apply that can help, but I think one of the most useful is to send the vocal to a bus and insert a compressor there, with a high ratio of around 10:1 or more. Set a low threshold, and a medium attack and release, then, in the next slot, load a distortion plug-in with a warmish sound. Use high- and low-pass filters, set to around 100Hz and 5KHz respectively, and mix a small amount back in alongside the lead vocals. You don't need to add much — it should be almost 'subliminal' — but it can really help to fit the vocal in the track. Nicholas Rowland
We are here today to help you break free.  It's time to understand the difference between the types of guitar strings.  We can have higher value from our brand of choice or any other by understanding which product serves our personal preferences and instruments the best.  Let’s dive in and learn about the many variables that makes certain strings better or worse for each individual player.
In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him. (info from Wikipedia, photo of Jimi Hnedrix from
This final trick is pretty cool for live use because these effects are very efficient, which means that you can have several tracks of 'racks' without straining your CPU. Go to the Mixer tab at File/Preferences/Project, and check 'Enable Solo on Selected Track'. Solo a track, and now all you need to do to call up a new sound is select a track, and the Solo will 'move' to that track. The change from one sound to another is instantaneous. Now it's time to amaze your audience!    
However, John Leckie states an interesting preference for an SM58 and U67 rig instead: "SM57s tend to be that little bit brighter than the SM58, which really isn't what you want when you're miking up an electric guitar amp. You really want to pick up a flat signal, an 'unstimulated' signal I suppose is the word... The U67 gives you the warmth and a broader sound."
PUENTE HARDTAIL Para cambiar las cuerdas, pase las nuevas cuerdas por los ojales correspondientes situados en la parte posterior de la guitarra y llévelas por encima de la silleta. Puede ajustar la octavación girando el tornillo de octavación situado en la parte posterior del puente con un destornillador Phillips para desplazar la silleta adelante o atrás.
The previously discussed I-IV-V chord progressions of major triads is a subsequence of the circle progression, which ascends by perfect fourths and descends by perfect fifths: Perfect fifths and perfect fourths are inverse intervals, because one reaches the same pitch class by either ascending by a perfect fourth (five semitones) or descending by a perfect fifth (seven semitones). For example, the jazz standard Autumn Leaves contains the iv7-VII7-VIM7-iiø7-i circle-of-fifths chord-progression;[80] its sevenths occur in the tertian harmonization in sevenths of the minor scale.[81] Other subsequences of the fifths-circle chord-progression are used in music. In particular, the ii-V-I progression is the most important chord progression in jazz music.
Nothing compares to a Martin. The craftsmanship and attention to detail is impeccable, and the sound: the sound. The sound is like heaven. If you're used to an electric, a Taylor may feel more comfortable, but nothing compares to the timbre of a Martin acoustic. In the right hands, the bass and treble are perfectly actuated. None of that "tinny" Taylor quality which - while useful in certain applications and seems "easier to play" - cannot hold a candle to the the deep, rich, nuanced tone of a Martin acoustic. Bob Dylan, Neil Young, Johnny Cash, Willie Nelson, Woody Guthrie, Eric Clapton... Need I say more? I own a D-35, and I wouldn't be caught dead without a Martin guitar in my arsenal. Complete, unequivocal perfection.
Every new 2008 Les Paul Standard will benefit from Gibson’s proven chambering technique, which leaves each guitar with perfect tone, balance, and weight. Prior to gluing the maple cap on top of the mahogany body, the expert craftsmen at Gibson USA carve out carefully mapped-out chambers in the body using a Computer Numeric Controlled (CNC) router. The positioning of the routes was established after careful examination of the resonant characteristics of the Les Paul. Gibson approached this process with the awareness that every change to the formula would have repercussions on the instrument’s sound. So, in addition to relieving the stress on a player’s back and shoulder, these lighter Gibson guitars also enhance the tone palette in a manner unique only to these guitars. The results are comfortable, lightweight guitars that are acoustically louder, with increased sustain and resonance.
If you are an insurance agent, pawn store, a manufacturer or appraiser searching for used guitar prices and other musical equipment values, Used Price is for you. Our extensive database contains the value of thousands of pieces of used musical equipment. Whether you are looking for a Fender guitar value, a Gibson guitar value or a certain bass value or drum value, we have them for you all in one convenient location.
In 1964, The Rolling Stones‘ Keith Richards obtained a 1959 sunburst Les Paul.[19] The guitar, outfitted with a Bigsby tailpiece, was the first “star-owned” Les Paul in Britain and served as one of the guitarist’s prominent instruments through 1966. Because he switched guitars often enough in that period (using models ranging from the Epiphone semi-hollow to various other guitars made by Guild and Gibson), Richards is sometimes forgotten as an early post-1960 Les Paul player.[20][21] In 1965, Eric Clapton also recognized the rock potential of the late 1950s Les Paul guitars (particularly the 1958–1960 Standard sunburst models), and gave them wide exposure. He began using Les Pauls because of the influence of Freddie King and Hubert Sumlin, and played a 1960 Standard on his groundbreaking album Blues Breakers – John Mayall – With Eric Clapton. At the same time, Mike Bloomfield began using a 1954 Les Paul goldtop he apparently purchased in Boston while touring with the Paul Butterfield Blues Band, and recorded most of his work on the band’s East-West album with that guitar. A year later, he traded it to guitarist/luthier Dan Erlewine for the 1959 Standard with which he became most identified. Concurrently, such artists such as Peter Green, Mick Taylor, Jeff Beck andJimmy Page began using the late-1950s Les Paul Standards.

You've come to the right place.  We offer a wide range of vintage and used guitars and basses including a great selection of Fender instruments.   We're guitar players who recognize and appreciate how important Fender has been to the evolution of Rock and Roll.  Please browse our web site, give us a call or visit our Chicago show room.  We're constantly searching for Fender guitars, new gear is arriving daily and they often sells before we have a chance to list them on our web site.  
Which guitar brand should you choose? It is one of the common questions which arise in every music lover’s mind. The basic answer is to find a guitar which can fulfill which fulfills all your demands and within your budget. However, for an appropriate solution, a user should check out all the features in a guitar before deciding which model to buy.
Of course, we’ve already mentioned the cool offset Jaguar shape of the body, which will turn plenty of heads whenever this budding bassist hits the stage. But with an active bass boost circuit, you also have the option to bump the sound of this way up past what’s normally afforded in a passive bass. Not to mention, the chrome hardware and the curved vintage logo print on the head really put this bass guitar over the edge visually.
To make frequency selective networks, we must use capacitors and/or inductors. Unlike resistors, both caps and inductors discriminate against some frequencies in favor of others. Capacitors preferentially pass higher frequencies; inductors pass lower frequencies more easily. Resistors help us set how much gets through, while caps and inductors select which frequencies get through. Inductors are big, heavy and expensive, so almost all tone controls use only caps and resistors.
The Squier Vintage Modified Jaguar Bass has major “cool” factor, and the sound holds out, too. With a P-bass style single in the neck position, and a J-bass style single in the bridge position, you’ll actually get the best of both worlds in terms of tonal options on the pickups. You have a choice between basswood (on the sunburst and crimson models) and agathis (on the black model), so there isn’t anything special about the woods they’re using in these basses. But the slim, fast-action, C contour of the maple neck will give you a nice, smooth J-bass feel that plays well above this guitar’s pay grade.

Replacing switch and jack covers. These are the plastic or metal covers that hold the jack and tells you witch switch is treble or rhythm. The switch cannot be repaired and will need to be replaced, however, a metal jack plate can never break and only will need to be cleaned. A plastic plate will need to be replaced or the screw holes need to be resized, do so properly and make sure every fastener is snug including screws and nuts.

The following effects are a step up from your basic overdrive, distortion and fuzz, with more specialized sounds. In this category, you’ll find pedals that include effects such as time delays or frequency modifications – things that go beyond changing the shape of a sound by also changing the pitch, rhythm or both. Others are simpler, but still offer enough tone-altering potential to set them apart from the basic pedals.

I am not completely sure this tuner info is completely accurate. Sorry about that... Remember as a general rule Grovers were used on style 21 and above, and Klusons were used on style 18 and lower. There are some exceptions (like during 1940 to 1945, and pre-1930s). On pre-war Grover tuners, there are basically two types used on Martins: G-93 (round button 'butterbean') and G-98 (scalloped buttons, aka "Sta-Tite"). Both came in 6:1 and 12:1 tuning ratios, with 12:1 coming about in 1938 (and replacing the 6:1 ratio). The post-1938 12:1 ratio Grovers can be always be identified since they combine the thin seamed tuner buttons with the long pointed baseplate, and the tuner gear is screw mounted. The 1938 and prior Grover G98 tuners have a thin seamed button combined with the a square tipped baseplate, and always had the 6:1 ratio. They also had the riveted tuner gear. Ater WW2 the G98 was reintroduced with pointy baseplates and a screw mounted gear, and this was copied by Waverly, Grover, Schaller, etc after the war. Also Martin used original Waverly tuners (open back, rounded base tips, butterbean buttons) after WW2 on 00 and 000 and some D guitars style 18 (and some 28) in the late 1940s and 1950s.
Similarly to the previous model, this guitar has a mahogany body as well as a fine looking maple top. What is more, this unit has an elegant metallic gold finish that you might like. Among the features that make it stand out, we feel like it is important that we mention its practical Alnico Classic humbuckers and the fact that it has a Rosewood fretboard. Additionally, it comes supplied with trapezoid inlays.
Vibrato design is slightly changed and enhanced with the addition of block saddles for adding a fair amount of firmness to the tone. Likewise, they also give a precise breakpoint for the strings. Talking about pickups, pac 112v is equipped with 5-way blade pickup selector. Similarly, master tone and volume controls are also provided for the neatest output.
Multi-effects pedals and processors come in three basic formats: floor-based units equipped with foot-operated pedals and switches, tabletop units with knobs and switches, and rack-mounted units. Most tabletop and rack-mount units offer foot control options in addition to the knobs, switches, and menus accessible from their control panels. Pedals and footswitches are often user-assignable so that you can instantly engage various effects settings and other presets with a single toe tap.
It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.
i just started using this book never having played before and am finding it totally easy to follow. the friendly narrative guides the reader through every step, explaining the most simple of terms and concepts clearly and concisely. and yes, the CD is funky and you can play along with it more or less straight away AND sound good, which keeps you motivated.

Many great players (including Hendrix) placed the wah before distortion... though many of the modern rock guys place it after distortion to make the frequency sweep cleaner. Personally, I prefer the Wah before distortion, but it's personal taste really. Depends a bit on the pedal too - how wide the frequency notch is and what frequency range it covers. I have my Wah on a G-Lab True Bypass Wah Pad, which I think is a great product... I have a few Wahs that I like, the Keeley Mod Vox Wah and the RMC3 are probably my first choices to try out.

As similar as the two instruments are, bass guitars have enough differences from electric guitars that bassists should definitely look for effects designed specifically for their instrument. By doing that, you’re getting a pedal balanced for the low-frequency dynamics of the bass, and built to help it blend better with the other instruments in the band. Many bass effects have the same purposes as guitar effects described above, including chorus, reverb, delay, phaser and tremolo.

I have a Les Paul Gold Top copy I bought new in the mid 70's. It has no brand name anywhere on it. I have done all the research I can and have found no conclusive results.I'm at a loss. It plays great! I do have pics. if that will help. Thanks for any help' It was bought in Montgomery Al. Clarence Carter's guitar player bought one while I was in the store so I figured ...must be a okay guitar. So I bought it. On the little square plate on the back it is hand engraved #0059. Thanks
I think singing with confidence without too much doubt was a satisfying thing. It was, artistically, very satisfying to be covering subject matter that means something to me. I think a little bit of that was getting to know yourself. And just the simple fact that I was ready to do it now. Everything else I'd done since going out on my own in '87 has been absolutely amazing to me, and I feel like the luckiest guitar player alive, and I am very grateful.
Sorry Joe but I don’t really any value of this arrangement. It could work only in super bright guitars that would always need some treble bleed. It’s much better to change pot values for guitars like that, go from 500K to 250K etc. When changing pots doesn’t cut it it’s better to get rid of the pickups/guitar than to have a bleed circuit on all the time, some of the magic is always lost.
For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound. 
Fender: Fender guitars are the best example of the old saying “Keep it simple”. They aren’t futuristic, there’s nothing unique about them, they are kinda too simple, their craftsmanship isn’t astronomical but when it’s about outright ruggedness rarely any other guitar comes close to them. Leo Fender designed the Fender guitars to be reliable working man guitars and they still hold true to that quality of theirs. I’m pretty sure if someone buys a good quality Fender guitar (especially the Tele) pretty much his sons, grandsons will still be able to play on that.
The Model EP-17-T was a regular-sized thinline with a single round cutaway, bolt-on neck, non-dipped three-and-three head, dots, three pickups, adjustable bridge, plain trapeze tail, elevated guard, three rocker switches plate-mounted on the upper shoulder, and controls on a rectangular strip on the lower bout. All three were offered in shaded mahogany finish.
The guitar’s ‘shoulders’ – where the body meets the neck joint – will usually be slightly more sloped than you’d see in a classic dreadnought acoustic, while the base of the body will also be narrower than larger sized guitars. All of which makes for a more comfortable and less physically intrusive playing experience. Another obvious benefit of this is the portability of parlour guitars. Their relatively smaller form factor means they lend themselves well to being slung in a case and carted off to gigs with less hassle than, for example, a jumbo-sized acoustic.
You may find a flood of several guitar brands in the Indian market. All of them claim to deliver the best products. Hence, it is a bit difficult for a newbie to choose the right one. That is why having prior background knowledge about all the brands is of utmost importance before you spend money on a guitar. Such know-how will help you to escape from the trap of words of mouth.
I’m Björgvin Benediktsson. I’m a musician, audio engineer and best-selling author. I help musicians and producers make a greater impact with their music by teaching them how to produce and engineer themselves. I’ve taught thousands of up and coming home studio producers such as yourself how to make an impact with their music through Audio Issues since 2011.
This company slowly merged into Hoshino/Tama but prior to their unification, produced instruments with the Star badge, mainly drums. They also produced guitars, including the infamous Zim-Gar badged electric and acoustic guitars. Over time, drum production was segmented to Pearl, while guitar contracts were taken up by Tama. Zim-Gar production was relatively short, as these were budget guitars made for K-mart between 1962 and 1968.

Was skeptical at first since I own a couple of vintage Martins. Aside from the LX1E being a sustainable responsibly built guitar that has HPL back/sides, hybrid neck/fingerboard, and whose soundhole smells like a Lincoln Log toy set this is an amazing find. Yup- it’s perfect for the overhead bin on airplanes, comes with a good gig bag, and sounds great plugged in. Experimented with .11 gauge string set, but this guitar is really made for either .12 gauge or a true .13 (medium gauge) strings set. This guitar is designed for the combination of heavier strings and assertive strumming or picking to create a sound that belies its small size. It welcomes being pushed, muted, and/or percussively played. Found the same to be true of Martin’s DX regular size guitars which sound amazing for what they are. While the E Sheeran LX model has his logos on it, this
For this list and those below we are including both new and used sales data. It's also worth noting that we did not combine multiple variations of the same amp like different wattages or cabinet speaker sizes, or the head and combo versions of the same amp, which we consider to be distinct models. We did, however, combine things like different tolex color and other minor cosmetic variations where applicable.
My 15 year old daughter recently renewed interest in the guitar she had bought a few years ago but had never really played much. She was disappointed when she noticed the strings were loose. We brought it here and Ted was so helpful and engaging. He recommended new guitar strings; normally you can buy the strings and do it yourself, or pay them to do it. He readily understood that while my daughter didn't know how to do it herself, she would like to know. He showed both my girls how to string a guitar, talking them through each step while he expertly strung the guitar and got it in perfect tune. Ted teaches guitar and his tutorial was an excellent recommendation of his teaching skills. He also threw in a cleaning cloth and gave us chocolates - how much better does it get than that?! We will definitely be coming back!
The primary difference in tone between the solid body and hollow body guitar is the high end bite one associates with the solid body guitar. From the biting rhythm of guitarist Nile Rodgers to the supersonic leads of Eric Clapton and David Gilmour, Stratocasters have found favor with so many guitarists because of their versatility and their timeless tone.
Next models is another semi-hollow design, only this time we are looking at a bit more neutral guitar. I wouldn’t go so far as to say that it’s somewhere between a solid body and a semi-hollow. That would simply be wrong, but it does have a harder tone for a model of this type. It didn’t take me long to find the right setup, and off we went. Sound, playability – everything is on point.
By the mid 1990s Korean instruments were rising in price as Korean labor rates and other costs went up. Many Korean and Japanese companies set up factories in Indonesia to take advantage of reduced costs there and Fender set up their Mexican factory to take advantage of reduced labor rates in a setting very close to their USA factory. With modern CNC equipment and Korean and Japanese ownership and management, it was possible for Indonesian factories to very quickly turn out good student- and intermediate-grade instruments. In my experience, however, none of the Indonesian products rival the quality of the better Japanese or Korean guitars. The new Mexican Fender guitars give excellent "bang for the buck" and in many cases play and sound better than the later CBS-made American Fenders.
In the ever-changing world of jazz music, you shouldn’t be surprised to hear of some big changes to the jazz guitar market either! To reflect this we’ve tweaked our chart, removing a couple of models such as the Ibanez AF95FB and the D’Angelico EXL101, and adding five new six-strings. These comprise the faithfully reproduced Epiphone Masterbilt Zenith Classic and the thinbody LH-302T from The Loar. In the semi-hollow section, we added the Ibanez AM93AYS Artcore Expressionist and the beautiful Hagstrom Tremar Viking Deluxe, while the solid-body section saw the arrival of Fender’s Classic Player Jazzmaster Special.
Here we have the very highly respected ... Alvarez Yairi dy91 ... This very unique and beautiful guitar is in AMAZING CONDITION and is based on the RARE exotic Hawaiian Koa tone wood and is one of more ornate & fancy D-45 Martin Drednaught Acoustic the Martin retails for well over $7,500 and this guitar offered here at JVGuitars is the Alvarez Yairi answer and is quite a HIGH END JAPANESE HAND CRAFTED GUITAR by one of the greatest Luthiers in Japan.... Reserve your Rare & Exotic Koa Yairi DY91 Today...this baby is in excellent vintage condition... This is THE DY91 to own... any questions please email me All the best! General specs:About the DY91: These High End Yairi acoustic guitars are Handcrafted for outstanding projection, this example offers enhanced bass response and an articulate high-end register performance. As with this one many are Sculpted from some of the most precious rare sought-after tone woods from all over the world. This example is Hawaiian WoW! Here are the Specs: Handmade in Japan Saddle & Nut: Bone Neck Joint: Hand Fit Dovetail Finish: Gloss Body Style: D-45 Style Slope Shoulder Dreadnought Back & Sides: AAAA Figured Koa Top: Solid German Spruce Neck: Premium grade Mahogany Fingerboard: Bound Ebony Scale: 25 3/8" (645mm) Width at Nut: 1 11/16" Fingerboard Inlay: Large Diamond Bridge: Ebony-Inlaid Body Binding: Ivory & Abalone Soundhole Rosette: Abalone Head Overlay: Figured Koa Pickguard: Black Tuning Machines: Original Yairi Gold Die Cast Finish:Gloss Natural Electronics: None Original Semi-hard shell case: Case candy Included .
Get ready to rock with the First Act Electric Guitar with Amp. It's scaled down for smaller players, yet it's designed with the same materials, electronics and appointments as First Act's full-size guitars for full rock sound. One high-output humbucking pickup delivers big rock distortion and classic clean tones. The maple neck and rosewood fingerboard offer a solid feel and warm tone. Classic hard tail bridge pumps up the sustain. Independent volume control means the ultimate in sound tweaks.

{ "thumbImageID": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "defaultDisplayName": "Epiphone Limited Edition SG Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51500000013041", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry-1500000013041.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51500000013040", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue-1500000013040.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.
For many people who pick up the guitar for the first time, learning scales is often not at the top of their priority list. This is normal and as a beginner guitarist, there is other more important foundation knowledge that should first be acquired. However, at the point when you start learning scales as a guitarist is when you know you’re starting to get serious about playing. Learning guitar scales is a fantastic way to practice your technique and theory. Scales also come in handy for a variety of purposes such as: Writing music Improvising/jamming with others Understanding how music
Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.
Imagine someone telling you about an old-time music store that had a huge stash of unsold guitars from the 1960s, plus some guitar effects from the ‘70s lying around in its upper floors in Newark, NJ. Well, you can bet it didn’t take long for me to beat a path to the door of Newark Music City (calm down; this was a long time ago and, while the company still exists, it’s long gone from Newark). Even though I was late in the game, there were still unmined treasures to be had. A real Temple of Doom!
This is also an amazing choice for kids and guitar novices. It comes in many different colors and it is quite easy to set up and tune. Once you manage to tune it, it will run for a long time. It has four tone modes and you can select one of them using a switch. It has one tone knob adjustment and one volume adjustment. It is quite easy to play and also highly comfortable.
You will come across many people who'll give you different opinions regarding different brands, and also, there are several other reviews on the Internet too. Keep your research simple, experiment, and keep frequenting guitar shops and secondhand musical instrument stores to check out the different kinds of brands. Play as many guitars of different brands as you can, and one day, you will find your 'guitar-soulmate' (sic.), the sight and sound of which will make you go 'wow!' So, if you're new to the guitar world or have recently developed an interest in it, this Melodyful article will surely sort out your doubts. Here is a brief comparison of different guitar brands along with detailed descriptions of the tone and sound. Take a look!
Smaller players, musicians who travel frequently, and parents shopping for children, may also want to consider travel and mini-acoustic guitars. These guitars were designed for the comfort of smaller players, and for convenience when traveling, but many guitar manufacturers have invested significant time and resources into creating smaller-scale acoustic guitars that don't compromise quality or sound.
The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.

Another example is Ovation, the company that almost single-handedly created the acoustic/electric category and radically altered views about how acoustic guitars should be constructed. No matter how hard they tried, Ovation’s repeated attempts to enter the solidbody electric area have failed. Instead, Ovation finally purchased Hamer. However, Ovation’s marketing failures do not mean it hasn’t made some pretty interesting – even innovative – electric guitars over the years, and these represent one of few areas in guitar collecting where you can find excellent, historically significant instruments, often at remarkably reasonable prices. Here’s the scoop on Ovation electrics (touching only briefly on acoustic/electrics).

I have a Gemtone guitar tube amp that was made in Canada in early 70's I think. This is the only Gemtone I have ever seen and the only information I could find out about it (but not verify) is that it was a sub-company of Regal Instruments. I would love to find some more info about this amp but have nearly given up after several years of searching. Sorry its not really an answer but my hope is to fire up the thread again so someone with more concrete info can chime in.
Market sentiment is overwhelmingly positive, with many reviewers describing how the Seagull S6 Classic M-450T exceeds their expectations. Build quality and playability gets the bulk of commendations, along with its clear sound and good acoustic projection. Some even dare to compare the Seagull S6 Classic with super expensive guitars from major brands.

If anybody needs a Bridge, I have a Teisco Roller Bridge for sale, it is a a copy of a Gretsch Roller bridge but includes a solid steel Base like a Rickenbacker Bridge Base. The string saddles are rollers which are adjustable side-to-side for proper string spacing, and each side of the bridge is adjustable for Height. It is in excellent condition, probably from 1965 thru 1968. On a scale of 0 to 10, it is a 8.
*When the item leaves our warehouse, they are generally shipped to EMS Worldwide Express Mail Service and it would usually take 7 – 10 days to United States. We ship our products from Mainland China where our manufacturing factory is located. We will inform you once your order has been shipped and we will be providing you with the tracking number so you can conveniently monitor the shipments progress on EMS Worldwide Express Mail Service website or SF Express and USPS and Parcel Force website.

I've been asked why it took so long to make this record. Well, it didn't really take too long to make this record. It took six months to make it. What I'd been doing before that was hopefully a journey I can continue. I guess what we play is still indie or alternative, I don't know all the different terms these days -- I've kind of lost track about what label I'm supposed to be these days. But it's still the kind of music I started playing when I was a kid, really. I'm fronting a band I could have fronted at fifteen or sixteen, so that's quite cool.
In 1941, CMI became the national distributor for National Dobro products. In ’42, Victor Smith, Al Frost and Louis Dopyera purchased controlling interest in the company. By this time, however, the world was at war and almost all instrument manufacturing ground to a halt as all segments of industry converted to production of materials to support the war effort. In October of 1943, with builders in wartime hiatus, the new owners changed the company name to Valco Manufacturing, incorporating the first initial of each partner’s given name (V-A-L-Co).

Unless it's broken and will need to be replaced, start with obtaining a new nut that is anything to your liking, preferably a blank nut rather than a pre-cut to avoid improper string height. If cutting a blank try copying your old nut and make adjustments if needed using the neck as a guide after cutting out the nut. To do this take a sharp blade that is easy to work with such as an X-acto and cut the finish that holds the sides of the nut. Make sure to cut all of the finish as it will break apart when you take out the nut.
A guitar recital may include a variety of works, e.g. works written originally for the lute or vihuela by composers such as John Dowland (b. England 1563) and Luis de Narváez (b. Spain c. 1500), and also music written for the harpsichord by Domenico Scarlatti (b. Italy 1685), for the baroque lute by Sylvius Leopold Weiss (b. Germany 1687), for the baroque guitar by Robert de Visée (b. France c. 1650) or even Spanish-flavored music written for the piano by Isaac Albéniz (b. Spain 1860) and Enrique Granados (b. Spain 1867). The most important composer who did not write for the guitar but whose music is often played on it is Johann Sebastian Bach (b. Germany 1685), whose baroque lute works have proved highly adaptable to the instrument.
The actual key that this song was written in is Bb (B flat) and can be a bit difficult for beginners; I prefer using a capo for this song and playing it in the Key of C. Using the capo to play this song doesn’t change how the song sounds, but it makes playing the song a lot easier. Using your capo on the third fret, you chord progression will look like C – G – Am (A minor) – F.

When it comes to guitar amplifiers, especially the ones that we love here at PMT, “cheap” doesn’t mean poor quality! Thanks to huge leaps in manufacturing processes, stringent quality control and the fact brands really care about the products they create, you can spend far less on an amplifier and musical instrument these days and still get a fantastic, highly playable and superb quality option for your needs.
After years of analogue delay companies decided that it was not clean or accurate enough. So they came up with a much sturdier design with digital delay chips.Not only can these get the timing down perfectly every time but they can also cover a wider range of delay options. Depending on the chip inside you can easily get multiple seconds of delay time in a single pedal.The main downside to these is that they can sound a bit clinical and too clean. Manufacturers have battled this by adding in different modulation options on delays like this to give it more character. If you want a delay for every possible scenario digital might just be the way to go.
Simple mistake that the beginners do is not selecting the right pickup on the right time. For example Normally they put the switch for the bridge pickup for soloing or do the powerchords. But then, to do some plucking, clean strumming or ryhthm, they still using the bridge pickup. So the sound is so dry, They should change it to toggle number 2(or for 5 way switch, toggle number 2 or 4)
“Spectrum ‘5’ has an unusually thin neck. To achieve the proper rigidity in this fast action neck Teisco had to select the hardest (and the costliest) material available…Ebony. The adjustable neck is fashioned out of 5 plys [sic] of laminated Ebony to insure maximum strength. The fingerboard of the Spectrum ‘5’ is likewise fashioned out of Ebony. Note the unique position markers and the extra wide, easy to finger frets.

In the midst of the controversy, conservative commentators alleged that the raid was a politically motivated act of retaliation by the Obama administration, as Juszkiewicz had frequently donated to Republican politicians, including Marsha Blackburn and Lamar Alexander. Chris Martin IV, the CEO of Gibson competitor C.F. Martin & Co., had donated over $35,000 to the Democratic National Committee and Democratic candidates in the same time period. Though Martin featured several guitars in its catalog made with the same Indian wood as Gibson, the company was not subjected to a raid.[55] Following revelations in the 2013 IRS targeting controversy, the right-leaning magazine FrontPage declared that "there is now little doubt the raid...was politically motivated," and that "the Gibson Guitar case can hardly be dismissed as regulatory overreach. In hindsight, it was an ominous foreshadowing of the explosion of misdeeds we are witnessing today.[56]

Gibson market the J-200 as the most powerful acoustic guitar on the planet, and we might just agree. It’s so punchy, and has so much presence, both in the low end and right up there with the more sparkling high notes. Combine this with the L.R. Baggs Anthem pickup system, and this is a guitar that is aimed squarely at live performances where the acoustic needs to really make itself heard. It’l
Distortion became more popular from the mid-1960s, when The Kinks guitarist Dave Davies produced distortion effects by connecting the already distorted output of one amplifier into the input of another. Later, most guitar amps were provided with preamplifier distortion controls, and "fuzz boxes" and other effects units were engineered to safely and reliably produce these sounds. In the 2000s, overdrive and distortion has become an integral part of many styles of electric guitar playing, ranging from blues rock to heavy metal and hardcore punk.
A frequency is determined normally by the position of a foot pedal. The input signal is boosted at, and around, this frequency, above the rest of the signal. As you move the pedal, the frequency being amplified changes up or down. The frequency range is set so that it sits well with a guitar, which in turn isn't hugely dissimilar to the human voice's frequency range.
But Lou’s edgy lyrical stance and image spawned something even more fundamental to deviant aesthetics: punk rock. It is with considerable justice that he graced the first cover of Punk magazine in 1976 and was subsequently dubbed the Godfather of Punk. Lou embodied a new kind of rebel hero, an amalgam of two distinctly different but equally vilified social pariahs: the disaffected intellectual and the scumbag street hustler. In recent years, he’s added a third persona: the grumpy old man.
I am very pleased with my new guitar, it is perfect... beautifully crafted, comfortable, just perfect for me...Rosewood and spruce and dynamic design; top of the line case, and the price was substantially less than full price, less than 50%!. There was absolutely nothing wrong with its packaging, as the description indicated. I was a bit nervous thinking it was going to arrive banged up, scratch or damaged, but the box was in good condition and the case was impecable. I got it two days after ordering it, and played it the next day at a school concert. Next will take it to a luthier to get it set, get better strings and an amp. Totally souped! Thanks Amazon for my musical gift for the holidays!
Yamaha’s also excel in terms of their playability, which is an especially important characteristic for beginners. Too many players sacrifice quality to save money on their first guitar, with the result being that they now have to deal with difficult playability that poses extra challenges to the learning process and can sour the learner’s experience with the new instrument. Yamaha offers an enticing balance between cost and quality.
But opposites not only attract—sometimes they also make groundbreaking music together. This is certainly true of Zoom’s collaboration with Doe and Cervenka. Since that band broke up, Zoom has gone on to do session work with everyone from the late John Denver to the Raconteurs. He’s also become semi-legendary as a guitar amp hotrod guru, having tweaked circuitry for Jackson Browne, the Black Crowes, Los Lobos, L7 and Social Distortion, among many others.

Its ok to put diffrent brand pickups in, i have a guitar with an iron gear hammer head at the bridge for heavy riffing and a slash signiture at the neck for sweet blues solos. I had it wired diffrent though, 1 master tone 2 volumes and a blend knob, with the 3 way switch in the middle i was getting too much hammer head due to its out put being higher, so the blend knob allows me to fine tune the mix of the pickups.
Before I recommended it to him, I went to my local GC and played one through some headphones. I thought it sounded pretty good - and certainly outgunned my Pocket Pod for pure functionality. Is this (or something like it) the be all and and all of tone? Of course not. But this (or something like it) can provide all sorts of options for practicing while leaving your neighbor (or spouse!) in peace.
But older guitars are not always better than new guitars; they can have unreliable parts, or be difficult to maintain. A lot of these are upgraded to make great players grade instruments. Keeping the essence of the original vintage guitar, but adding a little of today's reliability. A great example is the 1960s Gibson Melody Maker; an all-mahogany set neck guitar with Brazilian rosewood fingerboard and beautiful nitrocellulose finish. Well-built by Gibson, in their Kalamazoo factory, but with very basic pickups, tuning keys and electronics. Upgraded examples are everywhere, and are exceptional value as players grade instruments. Then again some guitars, especially early Japanese and European models aimed at the student guitarists of the early 1960s are completely unplayable. Even the cheapest modern day guitars put these to shame. Before buying any vintage guitar it is a good idea to know exactly what you are buying!
Tempo Delay: Most plug-in and hardware delays now allow you to automatically sync delay times to MIDI clock and then specify the interval of the repeats in terms of note values rather than milliseconds. A trick here is to use two simultaneous tempo-based delays with, say, a triplet delay setting, panned hard left, and a straight-note delay panned hard right. Things can get more interesting still if you apply this technique using ping-pong delays, so that alternate repeats bounce from one side of the stereo spectrum to the other. To create a true 3D effect, play around with the amount of original signal left in the middle. Depending on the intervals between your repeats, you can turn simple guitar and synth lines into complex, arpeggiator-like patterns or totally spaced out ambient pieces. Stephen Bennett
Here we have a Faithful Recreation of the classic Martin D-18 that was well crafted in Japan over 33 years ago. This is an excellent vintage Japanese guitar as it has been well taken care of all these years And has spent its years in California in the perfect climate to preserve the guitars original structural and cosmetic integrity its fit and finish to this day is still JVG rated at very good to excellent with no cracks or finish checking none – clean and still shines like glass….. its 1-11/16ths at the nut neck is a nice comfortable medium slim profile, neck is straight with correct amount of slight relief, action is good medium low and plays with ease and sound is clear and volume is good, tone is vintage sweet from its Aged tone woods. This is a true Lawsuit model as it has the direct image shape & size of the vintage Martin it copies is is a very cool D-18 guitar, its 33 years it’s obviously not new or mint but is surely vintage beautiful with its age and genuine warmth & patina and yes a few minor doinks but nothing to detract from its overall appeal. .
“Back in the fifties and sixties, you could tell what studio they had been recording in just by listening to the song,” Dr. Susan Horning Schmidt says. She is a professor at St. John’s University who has researched and written extensively about sounds and the recording process. During the period Dr. Horning Schmidt is referring to, the recording facilities were also physically bigger and bands often played together in a more live-type setting. Horning Schmidt states that “there’s a lot more space in the recording, a lot more acoustical space and dynamics.” Unfortunately, we’re losing that space with contemporary recording and production techniques.
Morris D-41 copy vintage 1980s Japanese high end hi class Exotic Brazilian Jacaranda Rosewood tone woods body it has detailed fancy inlay perfling and in in amazing condition. Here we are proud to present to you a Classic dreadnought high quality Guitar made of vintage aged tone woods with impeccable workmanship and top quality materials fit and finish rivals the best of the best. This guitar was made by the premier custom shop builders of Japan in the Terada factory and are well known for making Ibanez's top of the line series guitars like the Artists - musician- the George Benson line as well as many others Some of the great Aria's top of line guitars and a few other makers they have the great woods and skills to make some of the finest instruments made period and this Morris is one of them. Just have a good look and you'll see for yourself. One of the finest D-41 type guitars made She's approaching 40 years old and in superb vintage condition I'm looking for dings still and don't see them it's really in sweet condition WOW it's rare to find such fine examples like this all round nice I suspect this beauty will not last long. She is currently in our JVGuitars shop for a full set up and will receive a JVG-Martin upgrade which consists of new fit Martin bone nut & compensated saddle set a full fret dressing and polishing and a beautiful resonant set of solid ebony bridge pins with brass ring and inlaid Abalone detail as well as a new set of Martin 80/20 phosphorus bronze strings and a full body polish. Just in pics soon to come. To enquirer contact Joe: .
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(574) 247-0131, visibilitySalePrice=299.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, invMsgBackOrdered=false, displaySku=113206695, stickerUrlLink=null, skuPriceVisibility=1, kitCarouselSkuIds=null, invMsgAvailability=, availableDate=Thu Oct 25 07:28:45 PDT 2018, stickerURL=null, serialized=false, listPrice=399.99, name=Sunburst, isShipsInternational=false, storeCity=Mishawaka, partNumber=null, invMsgBuyToDemand=false, inventoryStatus=1000, storeName=Guitar Center South Bend, newPrice=299.99, status=instock, priceDropPrice=100.00, condition=null, stickerText=Price Drop, stickerClass=stickerEmphasis, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, prop65=null, usedGrade=Good, salePrice=299.99, warranty=false, wasPrice=399.99, isOnSale=false, stickerDesc=Price Drop, displayId=113206695, storeId=620} 299.99 USD
The Boss ME-80 has two modes of operations. MEMORY mode lets you scroll through banks and presets more like a conventional multi-fx unit, and MANUAL mode is what we described earlier, where you can use this pedal as if you had a bunch of effects on a pedalboard and just start tweaking away. MANUAL mode is really where this unit shines, and makes it stand out from other multi-effect pedals. The presets are okay for getting a taste of it, but as is typical of presets many are over the top.
A tabletop unit is a type of multi-effects device that sits on a desk and is controlled manually. One such example is the Pod guitar amplifier modeler. Digital effects designed for DJs are often sold in tabletop models, so that the units can be placed alongside a DJ mixer, turntables and CD scratching gear.[17] For a DJ, a pedal located on the floor would not be practical because she/he would find it hard to adjust the knobs.
Ooooohhhhh.... I used the Firebird 12 for two weeks on sessions in 1973.... I STILL solo the tracks I used that on... it's the BEST BEST BEST BEST OF ALL TIME !!!!!!!! FOR ANYTHING !!!!..... in fact, as I remember, the octave strings were wound different than the way Ric does it (high-low) and that even added to the incredible sound.....wanna sell the Firebird 12?

What about Derek Trucks? Mark Knopfler? Trey Anastacio? Chuck Berry? Even Eddie Van Halen deserves some credit–more than John Mayer does for guitar playing. John Mayer's fame as a guitarist piggybacks on his commercial success, which is a result of targeting a demographic of 13 year old girls. He's no doubt a skilled guitar player, but over-rated as a guitarist relative to guys like Van Halen, Knopfler, etc.
Beavis Audio Research – started in 2005 as a hobbyist site to share information on DIY guitar electronics. From the initial few pages of questionable designs, it has grown to a popular place for DIY freaks to visit and learn. Along the way, beavis has evolved into a small company. They strive to advance the DIY ethic and provide resources, tools, kits and products to the worldwide community of gearhounds.
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
the les pauls are way out of my ballpark...but i played a few to kind of get the feel so I could compare the cheaper guitars. All the cheaper guitars (including epiphones) sucked when compared to a gibson les paul....with the exception of one... a samick copy of a les paul. It was solid, played as good as the les pauls i was trying, had nice fretboard and headstock inlays, has a set neck, keys held the tuning well, tone was better than any of the other cheap guitars i played (very close to the les paul tone), and had a drop dead georgous birdseye maple top.
This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
Wow, to work with Johnny Mac! But he makes anything sound better, right? I am not a Stick player (love the instrument though), but I would think with a well-tuned setup, it might actually be easier? I think Tony Levin is running a Kemper now for his Stick. The whole idea isn’t an either/or thing, or which one is better. The idea is “running direct is a thing now, and here’s why.” But no one is taking our amps away. BTW, Bootsy is cray cray.
Seller: atcycle (2,136) 100%, Location: Sugar Land, Texas, Ships to: US, Item: 122791185383 This Used Guitar, cosmetically in general is in good used condition, it's played and everything works fine. Includes tremolo bar. The string trees have been removed for tuning stability but will be included should you wish to use them. Please use the enlarge feature and look over all pictures as this is the best way for me to show / describe the condition to you. I will have other Guitars listed. PLEASE NOTE ALL FAULTS SHOWN IN PICTURES ARE CONSIDERED PART OF THE DESCRIPTION.This Lotus "Strat" triple single coil is one of the finest examples of high quality imports which strongly competed with the big boys back in the day. Those of us who were around back then, learned that frequently these guitars had better sound and build quality than the Name Brand at that time. They were so good that the Big Name Company had them build many guitars for them! Condition: Used, Condition: There are a few signs of wear typical of an older used instrument. Missing switch button., Brand: Lotus, Body Type: Solid, MPN: Does Not Apply, Dexterity: Right-Handed, String Configuration: 6 String, Body Color: Black, Body Material: Solid Wood See More
There are some guitarists who place the compressor last, though, to boost their signal just before it hits the preamp of their amplifier. The drawback to this approach is that any hum or hiss introduced by other effects will be increased by the compressor's output gain. Sometimes you can remedy this by placing a noise gate before the compressor, however, the noise reduction can have an effect on the tone quality. A best-of-both-worlds approach might be to put your compressor first and use a signal booster just before your amplifier. Some guitarists also like the sound of putting their wah or envelope filter before the compressor to give it a wider frequency range to affect. Experimentation is always encouraged, but putting the compressor first is recommended.
Heat-treated Maple is used for the AZ's neck construction. Its use increases the wood's stability, durability, water resistance and tolerance of temperature changes. After extensive prototyping and trials, we concluded that 20.5mm thickness at the 1st fret to 22.5mm at the 12th fret is the optimal neck thickness for this process. The neck is sealed with an oil finish (sealer coat) which feels similar to a comfortable well-played guitar neck.
If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.

We make our Tone Bars / Ferrule Blocks (tone slugs) out of 360 brass and use them on most all of our string through custom guitars. You will notice an enhancement in sustain and beauty.  The ones sold here are not polished. Go to to purchase slugs that are polished. Please ask any questions you might have about the Slug. I offer quantity discounts.

By 1970, however, market conditions were changing rapidly. Japanese manufacturers had greatly improved their quality as well as their range of product offerings. Japanese labor at the time was much cheaper than American, and the imported guitars offered more "bang for the buck" than American ones. In a relatively short time, brands such as Yamaha and Ibanez were outselling Harmonies and Kays. The Japanese guitars had more comfortable neck contours and had truss rods that actually worked. The Japanese rapidly improved the quality of their instruments as well as the variety of their offerings such that by the mid 1970s, Harmony, Kay and Danelectro had all ceased operations, and Martin, Fender and Gibson had eliminated most of the low-end student models from their lines to concentrate on a price range well above any of the Japanese imports. I went to Japan in 1974 and attended a music trade show there as well as visited numerous factories and music stores. I was absolutely astonished at the variety of offerings available. Whereas in 1970 most Japanese guitars were low-end student models which often copied currently available new American products, by 1974 the more progressive Japanese manufacturers were well aware that many vintage American instruments were far superior to the new ones of that time. As a result some of these Japanese manufacturers stared to concentrate on studying vintage American originals. Fuji Gen Gakki and Tokai started producing extremely detailed copies of old Les Pauls, Stratocasters, Mastertone banjos and other vintage American acoustic and electric guitars and mandolins.

I am a giging, solo acoustic musician from Ohio, performing in Western NY, Buffalo. I only had Acoustic Electrics, 6 and 12 strings until I bought my first Godin A6 Ultra. (Acoustic and Electric Pick-ups). The A6 was impressive in it's own right, so I started looking at other Godin products, and ran into a 5th Ave Kingpin 1. Acoustically it was a 3 star, as I have a couple of Taylors and an Epiphone Masterbuilt that this guitar is no match for unplugged. HOWEVER !! This guitar was designed to be plugged in, and the Tone and ease of Play come shining through when the p90 is in the loop.
It all began in California in 1946, when inventor Leo Fender decided he could improve on the hollow-bodied guitars that were popular at the time by introducing the world’s first production solid-bodied electric guitar. Arriving in 1951, the Telecaster soon became a commercial success, shortly followed by the release of the sleek Stratocaster in 1954.
One of the key features that makes this stand out is the 7-inch high-resolution touch display which allows you to move amps, effects and set up your pedal board to exactly how you want it, sculpting the chain to your exact specifications. Want to run a reverb pedal before a distortion? Well, just move it around using the touch screen! The OLED scribble-strip and assignable colour LEDs appear above the switches and allow you to keep track of where your effects are – a great idea!
I have a epiphone sg 50th edition and it does great by me in all I do. I play a lot of 60's music and otherwise all I want. It's very versatile and not to mention the cherry red wood grain finish makes it looks really awesome. Everyone I've ever met has bragged on it and I've been offered all kinds of guitars from Washburns to fenders. Just recently I went to a old guitar player of 30 yearsiin my grandfathers neighborhood and he absolutely loved the tone and playability. He said the only thing it might need to make it better was a professional setup which I'll soon be getting. When I first got it I complained a lot that the strings were a bit harder to push down due to the longer scale of the neck (the neck on it is pretty long) however. If you' work with it for about 2 days off and on its no problem. I love epiphone and judging from what I've played in ibanez guitars I might soon invest in one of them.
If you prefer the Linux platform, then Guitarix is your best free guitar effects solution. It is a free, full featured guitar amp and effects software. Aside from its impressive amp modeling capabilities, Guitarix has 25 equally impressive effects modules. Effects include a noise gate, modulation effects like flanger and phaser and it even has weird stuff like auto-wah. Guitarix's low latency audio engine ensures respectable audio, which is said to give you not more than 10 milli seconds of delay. This is a simple yet effective guitar effects software, unfortunately it is only available for Linux users.
Ibanez are a Japanese musical instrument company. Although Yamaha is a better known Japanese musical instrument company, Ibanez exceeds expectations for electric guitars. This brand of guitars stands out in the world of rock guitars. They gained popularity in the 1980s when they introduced their original designs for guitars based on Steve Vai’s JEM Universal. Their designs have since become some of the biggest selling metal guitars. The Ibanez guitars are used by guitarists such as Steve Vai, Paul Gilbert, and Joe Satriani. In addition, Ibanez guitars tend to be very affordable, giving you a great guitar for a cheaper price.
11. Yamaha THR10 ($299): Another compact yet mighty combo amp, the THR10 boasts a mid-century-modern design with a variety of onboard effects and amp emulation options. This amp uses Virtual Circuitry Modeling (TCM) technology, which creates realistic and pristine tone. When plugging in your bass or acoustic guitars, you can even bypass the modeling section. One of the most convenient functions is the ability for the amp to run on a supplied AC adaptor or battery power for ultimate portability in your individual practice scenario. And it even includes Steinberg’s Cubase AI recording software so it’s plug-and-play right out the box!
AmpliTube's effects are as noteworthy as its amp modeling capabilities. The current version comes with up to 51 effects - modeled after rare vintage gear like Ibanez Tube Screamer, Arbiter FuzzFace, MXR Phase100, MXR Dynacomp, Electro Harmonix Memory Man and many more. What sets AmpliTube apart from the competition though is its very intuitive interface. No parameter is more than two clicks away, and its realistic looking graphics are extremely easy to operate - even allowing for drag and drop operations. If you want a quick setup software, AmpliTube is your best bet. Price: usually about $200 - Check out for the latest price and reviews

A Volume pedal is a volume potentiometer that is tilted forward or back by foot. A volume pedal enables a musician to adjust the volume of their instrument while they are performing. Volume pedals can also be used to make the guitar's notes or chords fade in and out. This allows the percussive plucking of the strings to be softened or eliminated entirely, imparting a human-vocal sound. Volume pedals are also widely used with pedal steel guitars in country music. It has also been used to great effect in rock music; the Pat McGee Band's live version of "Can't Miss What You Never Had" on General Admission illustrates what the pedal is capable of. Some volume pedals are:

Keep It Reel: Perhaps because a humble tape echo was the first effect I ever owned, delay has always been my primary effect. Whether to liven up repetitive loops or add apparent complexity to simple solos, it's worth getting to grips with delay the old-fashioned way. This means daring to switch off MIDI sync and manually setting delay time, driving feedback to the brink of madness, or routing the pure delay output through equalisers, filters and so on. Many of today's digital delays allow you to darken the delay iterations, but there's no reason not to find your own method to achieve this: adding alternative colours and discovering your own favourite processes. I find precise, perfect digital delays can be rather generic and characterless — so the more I delve into additional treatments, the more interesting and organic the results are. Paul Nagle

Frank Bowers Interestingly enough, they have completely different approaches to the job. Bo cranks his Gibson Firebird straight through a Peavey 6505 half stack with nothing in line but a tuner, while Frank rocks out on his Gibson Les Paul Customs through a Digitech GSP-2101 preamp, a Mesa/Boogie TriAxis preamp, a TC Electronics G-Major processor, a Mesa/Boogie 2:90 power amp, and a Marshall 4x12 cabinet. During their show, they each take jaw-dropping solos, and they share the spotlight on some of the best-executed twin leads since Thin Lizzy’s “The Boys Are Back in Town.”
The FX325A is one of the most popular Yamaha acoustic electric guitars especially due to its quality sound and affordable price. This model is suited for both beginners and experienced musicians. With a spruce top and Nato back and sides, this full-size dreadnought is both rich-sounding and durable, able to offer years of enriching musical experiences.

A modern popular rock artist known for use of the Super Beatle is Tom Petty and the Heartbreakers, although in the April 2008 issue of Premier Guitar, lead guitarist Mike Campbell revealed that the Super Beatle backline was, on their thirtieth anniversary tour at least, primarily used only as a stage prop, though Petty used his "on a couple of songs." In the group's early days, the Vox equipment was chosen because it was relatively inexpensive in 1976, yet had a handsome appearance. A photograph included in the article showed Campbell's guitar sound was coming from other amplifiers hidden behind the large Super Beatles, which Campbell stated were "a tweed Fender Deluxe and a blackface Fender Princeton together behind the Super Beatle, and an isolated Vox AC30 that I have backstage in a box."
Correct bridge placement determines a guitar's intonation when playing fretted notes. The distance between the guitar nut and bridge is the scale length. Placing the bridge too close to the neck shortens scale length and makes fretted notes sharp. Moving the bridge too far from the neck increases scale length and creates flat fretted notes. No amount of tuning helps a guitar with a poorly positioned bridge. Any fretted note falls high or low of the desired pitch.
In general, the typical situation is that HSH gives me options of cleaner/thinner/clearer tones which aren't as achievable with HH (even with volume and tone pots in use!). These are options I use very frequently, and I'd feel pretty restricted with HH! Though of course, this isn't the case for everyone. Indeed, I'm quite fascinated at the variety of tones Ron Thal and Andy Timmons get from the overly-simple SH set up they prefer!
If that were true, you'd have to take into consideration everything that vibrates after the string is stuck (the strap, the plastic of the knobs). You vibrate as well. So in essence, what you're saying is...the contents of your stomach affects the signal going to the amp. Hell, what wood your floors are made of affects the tonal quality. Maybe if you hit it hard enough you can get the ceiling involved.
( ( Some versions on this site have been carefully edited down to 6 velocity layers and looped at the almost inaudible tail ends to reduce Ram usage but the quality is almost indistinguishable.  They are based on a nicely sampled Yamaha C5 Grand. Samples have been normalised, re-attenuated, latency reduced and modified for sf2. Three or more brightness levels are available plus optional resonance.

This is one of the best guitars according to many guitarists and there are many reasons for that! It has a nice weight, not too heavy, not too light, and it’s comfortable to play. If you want to find a good guitar but don’t really know what to look for this is a safe choice, you will most likely love this guitar, especially if you like vintage-looking things! Go wireless on stage with this guitar, with one of these awesome wireless guitar systems.

I always say that Jose Feliciano? is indeed one of the greatest guitarists that’s ever lived. Flamenco, latin, bolero, classical, rock ect ect…. You name it and Jose can play it. Why he’s not on Rolling Stone’s 100 greatest guitarist of all time, is beyond anyone’s guess. dont believe me look up on youtube purple haze, the thrill is gone, flight of the bumble bee, Malagueña under Jose Feliciano. the guy can play anything and make it his own.
Some types of wood that were commonly used in the 1950s are close to extinct today, and can no longer be used for mass production. For instance, import and usage are restricted for certain types of Mahogany, Rosewood, and Ebony, and large guitar manufacturers in the US have been raided by the justice department on suspicion of using illegal materials.
You can get a rough idea of what the All-Electric looked like in Gruhn/Carter’s Electric Guitars (Miller Freeman Books, 1995), although this example has been refinished and replated, with a new fingerboard, tuners and added tailpiece, and is an atypical 14-fret Spanish model, possibly assembled at the end of the ’30s from leftover parts. Toward the end of National Dobro’s presence in Los Angeles, a great many guitars were assembled and shipped from remaining stock, often as exports.
The herringbone purfling (binding) was discontinued on style 28 guitars in 1947. The binding was made in pre-World War II Germany and was not replaceable from American sources. When the stockpile ran out in early 1947, D-28s (and all style 28 guitars) were bound with a new decoration scheme of alternating black and white celluloid (originally used on the Martin archtop C-2 model). Hence the term "herribone D-28" or "bone 28" is heard amoung Martin collections, signifying a pre-1947 style 28 Martin guitar.
Les Paul, the legend, designed this guitar. This guitar has had more widespread popularity than the Strat, IMO. Jimmy Page was a huge fan of the Les Paul and the SG. Gibson made the double neck SG on special request made by Jimmy Page which was featured in the song "Stairway to Heaven" in the concert at Madison Square garden. Jeff Beck and Pete Townshend are among other notable people who use the Gibson Les Paul.
Best Songs of 2018Best Songs of All TimeBest Singers of All TimeBest Guitarists EverBest Eminem SongsBest Metallica SongsTop 10 Linkin Park SongsBest Green Day SongsRockerboyBest Albums of All TimeBest Female Singers of All TimehayreanmarjonBest Avenged Sevenfold SongsBest Beatles SongsGreatest Music Artists of All Timecamp0112Top Ten Best Music GenresRHCPfan
A low latency audio card will allow to run your guitar signal (via an adapter cable or a mixer) into the PC and through the Amp Sims, (the M-Audio 2469 is a good card for this and reasonably priced), this will allow you to drive/crank the simulators as loud as you'd like to get the tone you want; and control the overall volume with your PC, good speakers/monitors are a must for this.

Since 1946, the P-90 has been pleasing guitarists with its vintage-soaked tone, that shares qualities of both single-coil pickups and humbuckers. P-90s are primarily single-coil in their construction (although larger and flatter), and come in a range of different housings. Although they feature a relatively low output, they provide a meatier tone than a single-coil, but with a bit more sparkle than a humbucker, and are therefore very versatile. They have been put to great use in rock, blues and jazz music, with Pete Townshend, Tony Iommi, and Carlos Santana all taking advantage of the sweet P-90 tone. On our chart above, the Seymour Duncan Antiquity is a great example, but check out more P-90 highlights on the dedicated page.

TASTING NOTES: The dynamic mics have the sharpest, edgiest tones. The condensers have a neutral, full-frequency sound. The ribbons have rounded highs and warm lows. Remember, though, that the prettiest sound isn’t always the best choice. Many engineers swear by the relatively harsh Shure SM-57, and not just because you can buy one for less than $100. Its tough, even brittle, edge can shine in aggressive rock mixes.

A modern popular rock artist known for use of the Super Beatle is Tom Petty and the Heartbreakers, although in the April 2008 issue of Premier Guitar, lead guitarist Mike Campbell revealed that the Super Beatle backline was, on their thirtieth anniversary tour at least, primarily used only as a stage prop, though Petty used his "on a couple of songs." In the group's early days, the Vox equipment was chosen because it was relatively inexpensive in 1976, yet had a handsome appearance. A photograph included in the article showed Campbell's guitar sound was coming from other amplifiers hidden behind the large Super Beatles, which Campbell stated were "a tweed Fender Deluxe and a blackface Fender Princeton together behind the Super Beatle, and an isolated Vox AC30 that I have backstage in a box."
This is a rare bird. Its a early ibanez maxitone 994. It has a huge neck but plays pretty great! It has that classic MIJ tone. I can include a new Gator case for $50 extra! The neck and frets are good! The electronics are a little dirty. Ill clean them the best i can, but i thoughtit worth mentioning. It is functioning as it should be just a little dirty!
Vacuum tube or "valve" distortion is achieved by "overdriving" the valves in an amplifier.[40] In layperson's terms, overdriving is pushing the tubes beyond their normal rated maximum. Valve amplifiers—particularly those using class-A triodes—tend to produce asymmetric soft clipping that creates both even and odd harmonics. The increase in even harmonics is considered to create "warm"-sounding overdrive effects.[37][41]
This cheap acoustic guitar is highly recommended for beginners on a budget. It continues to stand among the best selling acoustics, and many a young musician has had this as their first ever guitar. It features a familiar combination of spruce top, mahogany body and neck, and rosewood fretboard. The guitar's classic configuration and traditional dreadnought shape works well with almost any type of music, from folk to rock and everything else in between.

All product names, logos, and brands are property of their respective owners, and are in no way associated or affiliated with The Top Guitars.  Product names, logos, and brands are used solely for the purpose of identifying industry-standard products and brands used by The Top Guitars for the business of post production sound, and any related awards or honors therein. Use of these names, logos, and brands does not imply any co-operation or endorsement.

That would work, of course, but the result would be very different. You’d have minimum cut in the center position, with treble cuts of differing size in either direction, depending on the caps’ values. I’m not sure that would be particularly useful — the activity would be the same in either direction up to the point where the value of the greater cap kicks in. (I suppose one advantage would be that you could leap quickly to two “preset” values by turning the pot to minimum or maximum, as if you’d installed to caps on a DPDT switch, as seen here.) Or course, you’d have to worry about centering the pot, unless you could can find a part with a center detente. The resonant peaks, and therefore the overall tone, differ from standard. HOW exactly they differ is one of the things that I’m going to explore. 🙂

Let me begin by saying this guitar is really good right out of the box. It has a booming sound, and really fills a room even when not plugged in. However, to make it really shine, you should perform a basic setup. I replaced the saddle and pins with bone and sanded the bone saddle down to lower the action. The nut is good from the factory. I also oiled the rosewood fretboard and added Martin phosphor bronze medium strings. After doing this work, the guitar sounds every bit as good as my 90’s Martin DR which is stellar. At this price range, I didn’t expect much, but what I received was a very pleasant surprise. Don’t hesitate to buy this package!
Ok I know Hondo? .... But this is a good one folks its got a lot going for it really have a closer look, its actually built well it is a beautiful vintage guitar in its own right its condition and patina good looks good sound and easy playability make it an excellent entry or back up choice into vintage guitars, The Top appears to be solid 2 piece center seam spruce top you see grain going from top to bottom with really beautiful straight grain with flame type figuring that is surprising on a Hondo it's unique in that feature and it has that patina I love it caught my eye big time as I got close I couldn't believe it was a Hondo, it's logo has that same font as old Martin & Takamine used this one has the look and feel, but it's action was a little off spec , so I fixed all that it has great action now it's neck set and angle was excellent and I ended up changing its nut & saddle out for Martin born nut & saddle set and a new set of 80/20 strings, this guitar has good volume and sweet tone it rings clear and true with good intonation. It's in very good to excellent vintage condition, it's body & neck has no cracks , no finish checking and still shines like glass it's beautiful just have a look, it's not new or mint it has a couple drinks on its top and a couple on its back too but besides those it's exceptional vintage and plays easy with good low action with plenty of saddle left to lower more down the line of ever needed it's set up to meet or exceed Martin specs for playability. This is a lot of vintage guitar for this kind of price WOW! .
Ultimately, his thesis is shared by every single person interviewed for this article. It simply does not appear that there’s any way to objectively measure what is “good” guitar tone. A major reason for that is the infinitely varied human element of the musician performing and the audience listening. The impossibility of proving anything doesn’t, however, change the fact that so many guitarists revere those early tones. Some argue that’s because the early days were just better. Others point out that we’re simply intransigent.
I went to my local guitar store, and tested every one on the wall (under $1,000). I narrowed it down to two (the Ovation acoustic-electric of the same caliber, and this Yamaha FGX800C). In the end I ordered this guitar because of the excellent price on the "package" deal (hard case, strap, tuner, etc.). It sounds fantastic, stays in tune very well, is comfortable to play, and no "buzz". My limit of 4 stars is due to; 1) The strap is garbage...get a new one if you play with a strap. 2) The guitar only has a strap post on the rear of the instrument (it also doubles as the connection for the amplifier cord), and there is none on the front. You have to tie a string ahead of the nut. That gets in the way of the tuning and fingering of
One that I love listening to, and playing, is Under the Bridge - RHCP... also if you're not yet intermediate it's a good transition from beginner to more intermediate/advancey stuff. Anyways a lot of Beatles is good... same with Eric Clapton, John Frusciante and John Mayer. Really anything that is considered 'mainstream' is good to learn, 'cause odds are you already know it... making it easier to learn.
I had a 1984 Jackson Randy Rhoads Custom with a serial # in the low 400′s…that thing would sing on a note with high gain and boost with a TS-808 Tube screamer like a Sustainiac guitar…problem was the bridge was mislocated and it wouldn’t intonate correctly…sent it back…made them replace it with a new guitar (didn’t want plugs in it)…the new one had (ermmm…still has as I still own it) the EXACT same pickups, hardware down to the tuning machines, etc…EVERY single piece of hardware was moved over to the replacement (and in the case of the bridge pickup it is a proven fact as that was/is a retail version of an SH-6 wired for series/single coil/parallel…along with the pickguard with the additional hole for switch)…same types of wood used (3 piece maple neck through construction with poplar wings) yet the replacement has NEVER sung on a note. So what does that say? I have to say that the replacement does sound “better” overall in some intangible way…glassier I guess…longer sustain…yet it REFUSES to go into a sustained feedback loop.
Again, it's a matter of personal preference and style. Many people prefer to learn on acoustic guitars, but the strings are much tougher which causes fatigue to learning fingertips. The strings produce a buzzing effect as they are hard. Harder strings mean that learning fingers will find it hard to play bar chords. On the other hand, electric guitars offer comfort while holding down chords as the width of the neck is shorter than that of an acoustic guitar. The strings on an electric guitar are softer which makes means you can practice longer without your fingers getting sore. The habit of playing with light strings from the beginning can trouble in near future as acoustic guitars are also needed in various music production situations. And don't forget, you'll need to pick up an amp and so on to play your electric guitar.
Gibson has issued two Signature Les Paul guitars for Joe Perry of Aerosmith. The first was developed in the 1990s and was customized with an active mid-boost control, black chrome hardware, and a translucent black finish. It was replaced in 2004 by a second, more visually distinctive Les Paul, the Joe Perry Boneyard Les Paul. This guitar is characterized by Perry’s custom “Boneyard” logo on the headstock and a figured maple top with a green tiger finish, and is available with either a stopbar tailpiece or a Bigsby tailpiece; Perry typically uses a Bigsby-equipped Boneyard model in Aerosmith and solo live shows.
Their designs do not require them to have comparator inputs as with solid-state amps. The small amount of negative feedback in valve amps is only required to provide damping to the speaker. Valve Amplifier Design From physics we know certain things must be a particular order and size to be efficient and this is acutely so with valve amps. 60Watts is the minimum power capacity for an amplifier to bring quality speakers to life with full fidelity.

The company makes four models, the FS (fingerstyle), GC, D, and the Jumbo, each retailing at a flat price of $8,880 as of September 2011, making them amongst the most expensive new guitars in the world. The company also provides the option for customized furnishings such as exotic woods, buffalo horn nuts and saddles, mammoth ivory bridge pins and nuts, and specialized inlay and cutaway designs etc for an additional fee. The customized Petros guitars made of rare woods such as African Blackwood, Ceylon Satinwood or old flitch matched Brazilian Rosewood are sold for an extra $4,000 which with other furnishings such as ivory bridge pins can fetch over $13,000 in total.[2]
I have been playing guitar, banjo, bass and harmonica for 46 years - and I don't find a $4,300 Martin D 41 to be affordable (Guitar Center price). I play a Taylor 402ce and a dozen other instruments. I believe Taylor is the best instrument for the price..Alvarez Yairi guitars are very good too. Martin and Gibson make fine guitars but they are overpriced. I have a Chinese Maple Guild that sounds fine but the fretwork is amateurish. A Chinese Takamine New Yorker is very well constructed and sounds great.
The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
The Les Paul Triumph bass, like the Les Paul Recording guitar was first shipped in 1971, but was based on a slightly older model, the 1969 Les Paul Bass. Functionally, these basses were very similar, although the Triumph did offer low and high impedance operation, without the need for a transformer cable. This owners manual details the basses specifications, suggests a string set, recommended action, and suggests a series of tonal settings for rock, country and solo bass playing.
Excellent condition Traveling Wilbury's solid body electric guitar. Each Gretsch TW-100T is unique in it's graphics. Featuring a solid maple neck and an ebony colored finger board w/ dot inlays and no fret wear. Fully adjustable "Strat-style" tremolo / bridge including whammy bar. One single coil pickup and a volume control. Only the most minor of wear to the finish.
Guitar effects pedals alter the pitch, tone, and sound of your electric guitar or bass guitar, and as such, it is important to ensure you are armed with as much knowledge about them as possible before making a selection. The alterations made by these effects pedals include acoustic effects, compression, delay, reverb, distortion, overdrive, equalization, loopers, samplers, noise gates, pitch, octave, modulation effects, wah, multi effectors, volume, expression, and filters. They are available from brands such as Boss, MXR, TC Electronic, Electro-Harmonix, Catalinbread, and Fulltone.

Slightly ahead of the curve, in 1980 Ibanez revived its Destroyer as the Destroyer II Series. Indeed, the Destroyer’s “goosebeak” headstock shape would soon become the company’s trademark head. These first Destroyer IIs came in a variety of options and included bolt- and set-neck models that evolved over the next four years. The set-neck models had bound flamed maple tops over mahogany bodies and are exceptionally fine guitars. In ’84, the series introduced the high-end set-neck DT-555 Phil Collen Model, named for the fiery Def Leppard lead guitarist and modeled a little more after the Dean ML that had debuted in ’78, a kind of hybrid of the Explorer and Flying V shapes – basically an Explorer with a V notch in the butt.

I recommend you buy your pickup new, and from a place that you trust. I am getting more and more unsatisfied with Musician's Friend(everything I order is backordered...) so after being informed that my pickup was going to be in stock three weeks from when I wanted it, I canceled the order, bought the same pickup at Guitar Center(online) and it came in by the end of the week.
If you’re new to the world of guitar pedals, it can be a little daunting if you’re thinking to yourself “which guitar effects pedals do I need?”. Maybe you’ve bought your son or daughter a new guitar for Christmas or their birthday, or you’ve decided to really get serious when it comes to changing your sound up and you want to know where to start, what guitar effects pedals do and what sounds different guitar pedals make. Either way, we’re here to help with our handy guide to guitar effects pedals, complete with sound examples.

{ "thumbImageID": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin/K36144000001000", "defaultDisplayName": "Warwick German Pro Series Corvette $$ 4-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Satin", "sku": "sku:site51500000072278", "price": "1,949.99", "regularPrice": "1,949.99", "msrpPrice": "2,549.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin-1500000072278.gc", "skuImageId": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Natural-Satin/K36144000001000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Burgundy Red", "sku": "sku:site51500000138040", "price": "1,899.95", "regularPrice": "1,899.95", "msrpPrice": "2,649.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Burgundy-Red-1500000138040.gc", "skuImageId": "German-Pro-Series-Corvette-4-String-Electric-Bass-Guitar-Burgundy-Red/K36144000002000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
In late 1960, the amp was redesigned with three, rather than two, channels, each with two inputs, and offered with an optional Top Boost, or Brilliance, circuit, which introduced an extra gain stage and separate bass and treble controls. The Top Boost feature proved popular enough that it became standard on the AC30/6 (so named for its six inputs). Its chimey high end was a signature of the Beatles’ early recordings and was later favored by guitarists like Brian May, Tom Petty, Peter Buck and The Edge, whose 1964 AC30/6 has been featured on every U2 album.
Description: Guitar Type: Acoustic/Electric - Body: Mahogany - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Bubinga (African Rosewood) - Figured - Sides: Bubinga (African Rosewood) - Figured - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Ivory - Frets: 20 - Inlay: Mother Of Pearl - Dot - # of Strings: 6 - Bridge Construction: Rosewood - Cutaway: Single - Soundhole: Round (Traditional) - Rosette: Mother Of Pearl - Hardware: Diecast, Gold, Grover Tuners - String Instrument Finish: Natural
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: hohner","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"schecter","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
Some acoustic guitars, regardless of the body style, feature a cutaway in the upper bout to allow players to more easily reach the higher frets on the guitar neck. Phil Keaggy, a prolific and highly celebrated American guitarist, usually uses an acoustic guitar with a cutaway. If you plan to play leads on your acoustic, or are used to playing an electric guitar, you may prefer a guitar body with a cutaway.
SCALE LENGTH What is a "Scale Lenght?" The scale lenght is the lenght the string travels between the nut at the top of the fretboard and the bridge at the mid section of the base of the guitar. To determine the scale length of your guitar you would measure from the front part of the nut where it meets the fretboard to the center of the 12th fret on the neck and multiplying that by 2. Add about 3/16" to that on the low e string and taper that to about 1/16" added to the high e string. This is called compensation and that is why you see that tapered line on a bridge. Go to Stewart MacDonnaldfor more info. They also have a Fret Calculator that helps you determine your particular scale length in addition to a page dedicated to helping you out with tons of free info for your guitar building projects.The fret is the metal of nickle wire that is raised up off the fretboard. I would suggest buying a neck that has been pre made from a manufacturer that fits the design concept that you want to go with. I bought mine from Guitar Parts USA for about $70. You can pay anywhere from $50 to $300 for a neck at online retailers, but surf around and make sure you are satisfied with what you get. Guitarpartsusa will tell you to buy an expensive neck if you are building an expensive guitar, not a $70 neck. But for mine the $70 neck works just fine. Once you get the neck in and you determine what the scale length is you can lay it all out on paper. I recomend buying all your hardware, pickups and knobs before you draw your final template. This will allow to place everything where you want it and know what size holes to drill for the electronics and how big the cavites will need to be for them and the pickups.
While relatively new compared to many established brands on the market, Seagull has managed to gain traction in the past few decades. Started in Canada in 1982, the company focuses on building high-quality acoustic and acoustic-electric guitars. These usually use solid tops rather than laminated tops, resulting in crystal-clear sounds and superior quality.
The guitar's contribution to the sound comes from its mechanical construction, including the type of wood used, and the pickup system fitted. The hugely popular Fender Stratocaster uses simple single-coil pickups, which tend to give it a bright, articulate sound that doesn't take up too much room in a mix. Guitars with humbucking pickups, on the other hand, tend to have a thicker, more solid sound that can overpower other guitar parts or other mid-range instrument sounds. Tonal qualities aside, humbuckers by their very nature are designed to reject electromagnetic interference, while single-coil pickups are very susceptible to it. Specialist stacked humbuckers, such as those made by Kinman, Dimarzio, Fender and others, are available for use where something close to the original tonality is desired but without the noise problems, and for serious studio work these are a good option. Note that CRT computer monitors emit a lot of electromagnetic radiation from their scan coils, so a flat-screen LCD display is always an advantage if you need to record guitar into a computer system.

The Effect: Expression pedals are nowhere near as popular as some other guitar effects. However, they have the power to make or break your guitar tone, depending on how far you are willing to go. At their very core, expression pedals are nothing more than a potentiometer in a pedal form. They can be as simple as that, which is represented beautifully by the Mission Engineering Inc EP­1, but there definitely are more advanced designs available. The purpose of an expression unit in your signal chain is to give you more control over equipment which supports this kind of accessory. We’re talking rack mounted effects, digital processors, guitar effects pedals and more. In some cases they are downright necessary, but in most they offer a whole new level of control over the effect in question. Despite their inherent simplicity, finding a good one still take some effort, lots of research and planning.

{ "thumbImageID": "Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard/H76503000004001", "defaultDisplayName": "Fender Standard Telecaster Left Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Sunburst Gloss Maple Fretboard", "sku": "sku:site51310681125015", "price": "499.99", "regularPrice": "599.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard-1310681125015.gc", "skuImageId": "Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard/H76503000004001", "brandName": "Fender", "stickerDisplayText": "Price Drop", "stickerClass": "stickerEmphasis", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black Gloss Maple Fretboard", "sku": "sku:site51310681125013", "price": "499.99", "regularPrice": "599.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Telecaster-Left-Handed-Electric-Guitar-Black-Gloss-Maple-Fretboard-1310681125013.gc", "skuImageId": "Standard-Telecaster-Left-Handed-Electric-Guitar-Black-Gloss-Maple-Fretboard/H76503000002001", "brandName": "Fender", "stickerDisplayText": "Price Drop", "stickerClass": "stickerEmphasis", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

The Epiphone Thunderbird IV Reverse Bass is Epiphone’s most distinctive bass guitar to date. The Thunderbird features the classic reverse body styling and dual humbuckers just like the Gibson originals! The Thunderbird IV features an alder body and a 34 inch scale bolt-on maple neck with a rosewood fretboard and dot inlays, and warm and phat dual humbucking pickups.
Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.
OM-42PS: Paul Simon’s signature acoustic model (manufactured in the 1997 model year) is based on the OM-42, which had not been manufactured since 1930. Alterations were specifically requested by Simon himself. From the original planned run of approximately 500, only 223 were produced, making these a collector’s item. A standard version of the OM-42 is in the current range.
These are world class guitars and have got probably the best feel any guitar can give apart from that u can play everything on these guitars from classic rock to jazz and blues followed by metal. the main thing that these guitars are known for is their finish and there unique necks which are really fast and not too thin which keeps your tone and feel in place. I would say that these guitars definitely deserve a place in the top 3 and definitely do watch out for the petrucci signature models
With the development of rock, the Tele inspired and sustained yet another genre. Keith Richards of the Rolling Stones has composed many classic riffs on his battered “Micawber” Tele. Iconic are also worn-off green and respectively white Telecasters of the two frontmen of Status Quo, Francis Rossi and Rick Parfitt. Another signature Telecaster player is Andy Summersof The Police. Jimmy Page used a psychedelic-colored 1958 Telecaster, (painted by Page himself, and also known as the “Dragon Telecaster”) on the first Led Zeppelin albums, and also for the lead solo in the 1971 song “Stairway to Heaven“. The guitar had been given to Page by his friend Jeff Beck,[7] who had also been using the Telecaster with The Yardbirds. Bruce Springsteen used a custom Telecaster (with an Esquire neck) off and on throughout his career, both solo and with the E Street Band. David Knopfler, rhythm guitarist from Dire Straitsplayed a sunburst custom Fender Telecaster with white ribboning when with the band.
There are several factors to consider when establishing a good guitar tone. Here are some guitar tone tips.  Lets start with electric guitar tone. With electric there are three major factors to consider…the guitar, the amp, and the effects. There are all types of guitars with all types of pickups. Single Coil pickups and humbucking pickups are the two main pickup categories. I prefer humbuckers for the simple reason that they are less noisy. I like the tone of a good single coil pickup but I have never had much luck with keeping them from buzzing terribly. This is especially a factor when you are playing gigs in dive bars or clubs with bad electric wiring. You are much better off with a humbucking pickup. If you are gigging musician I would suggest having at least one in your arsenal. Generally speaking your Fender strats have single coils and your Les Pauls have humbuckers.
Reverb is a sound effect used both in music and audio engineering, which adds a spatial dimension to the original track. To put it into more simple terms, a reverb gives you an impression that the sound is originating in a large room. You are hearing the source sound but also its numerous iterations as it bounces off different surfaces. Reverb guitar effects pedals offer a simulation of this phenomenon.
[Attention Korg Pa3x /Pa4x owners and Korg Pa700/1000 owners- I have a special version of this 6-velocity layer piano in .set format that will load to your Korg in compressed format at 116mb (equivalent to 232mb) - This set sounds wonderful on the Korg and uses 22 oscillators for outstanding realism including resonance, key-off and pedal effects. Send me an email (see bottom right) and I can provide a download link or go to the demo on SoundCloud here Korg Pa Yamaha C5 and follow the download link]

Fender has shown the spec sheets of its popular Mexican-built Deluxe Series Roadhouse Stratocaster model some love to create a reboot that comes seriously well appointed. The upgraded model features an alder body and bolt-on maple neck, with the option of maple and rosewood fingerboard, finished with satin polyurethane. Keep sniffing around and you'll find other features like the 'Modern C' neck profile, 22 narrow/tall frets, a contoured neck heel, synthetic bone top nut and a set of locking tuners with vintage-look buttons. While the previous editions of the Roadhouse and came with a 241mm (9.5-inch) fingerboard radius, the new model packs a flatter 305mm (12-inch) camber. Yes, the same radius as a Gibson Les Paul, making for easier string bends and lower action. The new Roadhouse features three Vintage Noiseless (1st generation) single coil-sized humbuckers wired to a five-way pickup selector blade switch, and master volume and tone controls. Lurking between the volume and tone knobs is the V6 preamp control, a six-position rotary switch that gives you access to a series of tweaked single-coil tones. Plugging in the Roadhouse reveals a slew of classic Strat tones. The pickups exploit the natural tone and woodiness of the guitar, while the Noiseless aspect lives up to their vow of silence, making them indispensable in a recording situation. As a result, bar metal, this is the best Fender electric guitar for just about all scenarios.
Mike Longworth’s book shows at least three guitar amplifiers carrying the Martin name from the early ’60s. Who made them is unknown… most certainly it wasn’t Martin. In 1961 Martin marketed a pair of combos, the Model 110T and Model 112T. Both had top rear-mounted controls and a very groovy geometrical grillcloths in a sort of M.C. Escher pattern. Presumably the 110 featured a 10″ speaker, while the 112 had a 12″. The “T” suggests a tremolo circuit. In 1962 Martin offered a very cool #700 portable amplifier, a unit ensconced in a leather carrying case, presumably battery-powered.
In some modern valve effects, the "dirty" or "gritty" tone is actually achieved not by high voltage, but by running the circuit at voltages that are too low for the circuit components, resulting in greater non-linearity and distortion. These designs are referred to as "starved plate" configurations, and result in an "amp death" sound.[citation needed]
When it comes to combo amps, the speakers included will usually give you a good idea of what to expect in terms of power and performance. While bass amps are in a category of their own, guitar combos tend to use speakers of anywhere between 3″ right up to 15″. Obviously, the bigger the speaker, the better suited it is for the stage, while having more than one is an instant upgrade to the power available.

You may find a flood of several guitar brands in the Indian market. All of them claim to deliver the best products. Hence, it is a bit difficult for a newbie to choose the right one. That is why having prior background knowledge about all the brands is of utmost importance before you spend money on a guitar. Such know-how will help you to escape from the trap of words of mouth.

The process of building our kit guitars and basses is straight forward and requires little experience in woodworking or in instrument building. The entire instrument can be assembled with a few simple tools. Setting the instrument up for your playing style is also straightforward. We will guide you though the basic process in our instruction manual. For more complex or particular setup requirements, we suggest that you work with a professional for setup - just as you would with any instrument that you purchase.
But Zoom also served as the perfect foil for X’s principal songwriters, singer Exene Cervenka and bassist John Doe, who were arty, bohemian denizens of hip L.A. environs like Silverlake and Venice. Zoom was a politically conservative Christian greaser from the notoriously uncool southern L.A. suburbs of Orange County. In the now-classic L.A. punk documentary The Decline of Western Civilization, he is famously shown refusing to get a tattoo.