Despite the numerous different analog devices, it is very rare for them to be able to duplicate all aspects of a Leslie speaker. Thus, Rotary Speaker Simulator are always going to be digital, utilizing modelling algorithms to model the relations between the rotating horns and bass baffle. And how the sound bounce around the cabinet. As Leslie also have an amplifier section, most of these typically have overdrives to simulate that aspect. Some of these pedals can even accept keyboard's input.
Directional mics, such as cardioids and figure-of-eights, exhibit different frequency responses off axis — broadly speaking, off-axis sounds tend to be duller, although it's a complex effect which is different for each model. Professional producers are well aware of this, and employ the effect to refine their sounds. For instance, Chuck Ainlay comments "I'll usually start with a [Shure SM57] on the amp; but not straight on axis with the middle of the speaker; it's usually off-centre, angled towards the middle of the speaker and generally just off the grille." Jay Graydon refers to a fairly similar setup: "I position the mic about one inch left of the edge of the speaker-cone centre, using a 22-degree angle, and about one inch back from the grille cloth." Andy Johns, on the other hand, has said that "the miking technique I used on electric guitars for years was two [Shure SM57s], one straight on, and one at 45 degrees. Put 'em together, and it always works."
Here's some net info you may find interesting. Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (They may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. According to an article in Vintage Guitar Magazine, importation of Hagstrom-made Kents began in 1962. Another story is that Hagstrom sold Kent-branded guitars through distributors other than Buegeleisen & Jacobson in the U.S. without permission from J&B and were forced to withdraw them after a short time. By then Hagstrom had become better-known and could sell them under their own name, anyway. At first, the idea was to keep ’em cheap and sell to the beginners and students. Later, as Japanese manufacturers proliferated and competition became hot and heavy, some of them began to copy the Fenders and Gibsons of the time. As quality began to improve, some manufacturers again began issuing thier own designs. One of the “beginners” who got a start with a Kent Polaris I was Bruce Springsteen. Alex Lifeson of Rush got started with a Kent acoustic. One of Gene Simmons first guitars was also a Kent. The BBC series “The Seven Ages of Rock”, episode 2, showed Lou Reed (R.I.P) with the Velvet Underground playing a Kent 532 Copa at Andy Warhol’s hangout. Kent created a vib then and they're still doin it today.
Unassigned maker badge names are AGS, Alex, Andre, Aquila, Asco, Avon, Axiom, Bradley, CG Winner, Clear Sound, CMI, Columbia, Commodore, Cortley, Crestline, Crown, D. Lewis (?), Danelectro, Dynelectron (some), Diplomat, Dixon, Dorado, Eagle, El Degas, Exceltro, Exper, Encore, Fandel, Garzia, Goya, Grant, Grenn, Laguna, LTD, Magnum (?), Maier, Monroe, Marchis, Mark II, Masaaki (?), Matador, Norwood, Palmer, Prairie, President, Rodeo, Sanox, S.G.C., Splender, Stella, Targa, Taro, Voxton by Vox, and Yoshi. Some of these badges are attributed to the importer as the 'maker', which is untrue. It's possible that some of these badges were made by smaller Japanese manufacturers that have faded into history.
Traditionally, the vast majority of professional engineers prefer to record electric guitars through a mic’d up amplifier, rather than use a DI (direct injection) box, even though specialist guitar DI units are readily available. That said, there are many pracitcal reasons to split the signal from the guitar and use a DI box in conjunction with an amp. If you find out later that the recorded amp sound doesn’t work in the mix, or you wish you hadn’t committed a particular effect ‘to tape’, the pure guitar sound can be re-amped and subsequently reprocessed without the need to discard a great take. You can route the DI’d signal through a modelling plug-in and blend that with the mic’d amp sound, too.
Fast forward to 2018 and ESP is still going strong, with a huge range of speedy guitars tailored for heavy rock and metal, including several 7- and 8-string models. ESP offers a range of popular models in the budget market (under its LTD subsidiary) as well as high-end guitars, played by some of the biggest names in heavy metal – Kirk Hammett, James Hetfield and Stephen Carpenter to name a few.
So, which are the best budget electrics guitars available today? We've gathered a selection of the electric guitars that we reckon offer the best bang for the buck in the sub-$/£500 market. You may recognise some of the perennial budget classics (hello - again - to the trusty Yamaha Pacifica), but there's a raft of high-scoring options out there for the more adventurous.

Having perfected the modelling amp concept, Line 6 have become experts at delivering a huge variety of great sounds in a convenient, affordable package. Experiment with 12 different amp models, from classic 1960s Fender tone to the “Insane Red”, inspired by the mental Mesa/Boogie Dual Rectifier, and sculpt your tone further with the seven built-in effects.
The design, while nothing particularly special, is clean and beautiful, which will help it appeal to most guitarists - the dreadnought acoustic body being one of the favorite parts. Ultimately, just about anyone could pick up this guitar and get what they need out of it, which is why it makes our top pick. We could recommend it to anyone, and when you talk about the price, it becomes even more attractive, because this is a high-end guitar for mid-range money.
2. Materials. The timbers used to make these guitars were sourced from every corner of South East Asia. These timbers were “old growth”; in plainer words, the timber was taken from established forests. The advantages of this type of wood are long term stability and strength. Further to this, many of these timbers were species that are now on the endangered list and are therefore illegal to log and/or export. Now, while we consider the cutting down of established “old growth” forest timber a crime, it would be an even bigger crime not to make the most of what is already there. Whilst the build quality of the modern Asian made guitar (i.e. China, Indonesia, Vietnam etc) is exceptional, most of the timbers used are “plantation” timbers or more overly “new growth” timbers. Though this forestation is certainly light years ahead ecologically, it tends to yield timber which is brittle and can be unstable, making many repairs, such as a broken headstock untenable.
Now, before you buy a brand new electric guitar, it is a good idea to pause and think about the purpose that you are buying it for. Do you just want to learn from it? Maybe you will want to upgrade it after a year or two when you become a more skilled guitarist? If this is the case, go with the most basic or affordable guitar. You don’t need anything fancy yet.
Some guitarists use identical pickups in each position and still get contrasting sounds from each pickup. Others use different types of pickups, often to balance the tonal tendencies of a particular pickup position. For example, a guitarist might choose a moderate-output pickup in the neck position and use if for clean-toned chords, but opt for a high-output bridge pickup for a louder, more distorted, solo sound. A pickup of that type will probably sound darker than a single-coil, but a player who finds the naturally twangy bridge position a little too bright would welcome that change.

First, you have 11 different modes, including the TonePrint option, just like the Flashback delay. Then you have a true bypass circuit with an analog dry-through signal, which perfectly preserves the natural tone and EQ of your acoustic guitar (again, similar to the Flashback's setup). When you're using the effect, we would advise tinkering with the mix to get about 35-50 percent of your dry signal coming through.
Updated! Now has complete information on how to set up a guitar with a tremolo bar including the Floyd Rose Tremolo System. A complete step-by-step guide to maintenance and setup of your electric guitar. This guide, packed with images, will show every aspect of essential electric guitar care such as changing the strings, adjusting the neck, and setting the action to match your playing style. It will also show you how to fix common electric guitar problems such as buzzing strings, scratchy pots and much more. Electric Guitar Repair and Maintenance is a great resource for any guitar owner. Now at a lower price!
A good starting point when recording is to place the mic close to the grille and positioned over the centre of the speaker. However, it's worth moving the mic a little off centre if you're after a less toppy sound.Guitar amps tend to use 10-inch or 12-inch speakers without tweeters or crossovers, so they have a very limited upper-frequency response. These speakers may be used singly or in multiples, in either sealed or open-backed cabinets. The familiar overdrive sound was almost certainly discovered by accident when early amplifiers were driven beyond their design limits in an attempt to obtain more volume, but because of the restricted top end of the speaker systems employed at the time, the distortion was stripped of its more abrasive upper harmonics and actually sounded quite musical. So, what started out as a side effect of limited technology soon became adopted by blues players and turned into a distinctive style, which later evolved into rock, and then into heavy metal with all its spin-off genres.
For his work on Supernatural, Glenn Kolotkin turned to elaborate multi-miking as a way of managing Carlos Santana's complicated setup. "I used multiple microphones on Carlos' guitars: Electrovoice RE20s close, Neumann U47s further away, an SM56, U87s. He was playing through an assortment of amplifiers at the same time, and by using multiple microphones I was able to get just the right blend."
Watching the short documentary posted above about Joe’s youthful experiences with MXR pedals was a real treat for me and sent me nostalgically back to those childhood days discovering pedals with my friends. I don’t know a whole ton about Joe’s use of particular pedals and such, but I’d definitely love to learn more. I do, however, appreciate how indispensable they are to an electric guitarist, especially a supremely talented one like Joe. Watching Joe’s fingers as he plays is magic, but I definitely need to start paying attention to how he’s playing guitar with his feet.
Featuring a sound engine derived from the bigger, premium-priced GT-100, the GT-1 contains 99 preset and 99 user patches each built from a chain of blocks that can draw from 108 effects, including 27 amp/speaker sims and a 32-second looper. The first two footswitches scroll through patches, while the third (CTL1) footswitch is used to turn an effect, or a combination of effects, on and off in a patch, or for tap tempo. Sonically, there's some great stuff here. Many of the presets are playable straight off the bat, but the wide range of effects means that you can get really creative with your own patches. As you'd expect from Boss, the modulation effects are a highlight, as well as the delays and reverbs, particularly the Tera Echo. We've heard better pitch-shifting though... While the COSM amp sims will give you an approximation of the real thing for recording, at this price, you don't get the playability and detail of high-end modelers. Likewise, the overdrives and distortions work really well when building a patch but, used as solo effects, have less of the impact of real analogue pedals. The acoustic guitar simulator is class, though. For live use, the GT-1 doesn't have the flexibility of bigger units where you can switch individual effects, although you could get 
by in a live situation with careful sequential use of your own patches and the CTL1 button.
Since 1946, the P-90 has been pleasing guitarists with its vintage-soaked tone, that shares qualities of both single-coil pickups and humbuckers. P-90s are primarily single-coil in their construction (although larger and flatter), and come in a range of different housings. Although they feature a relatively low output, they provide a meatier tone than a single-coil, but with a bit more sparkle than a humbucker, and are therefore very versatile. They have been put to great use in rock, blues and jazz music, with Pete Townshend, Tony Iommi, and Carlos Santana all taking advantage of the sweet P-90 tone. On our chart above, the Seymour Duncan Antiquity is a great example, but check out more P-90 highlights on the dedicated page.
Solid Body Guitars: For those looking for a more versatile array of tones blended with the deepest number of volume options and full-blooded sustain, the electric solid body is the right machine. The differences between various types of solid body models are vast — even between an SG, the most popular model Gibson makes, and a Les Paul, Gibson’s six-string flagship. A wide variety of tone woods, including mahogany, maple, alder, spruce, maple and, commonly for the fretboard, rosewood and baked maple, are employed. They are extremely versatile instruments and have been spotted in the hands of players as wide-ranging as Les Paul and Zakk Wylde.
So what did I buy? A late 1940’s FIDELITY, of course. Haven’t heard of FIDELITY? Me, neither. But it met the needs. It was very light an easy to carry. As for meeting my volume needs…it was VERY quiet. Dead quiet. As in, silent. So, that part needed some work. Sixty bucks. Not bad. Less than an assembly-line stomp box. It looked like a 50’s space heater in crap brown with tootsie roll brown and vanilla cream paint and chicken head knobs. Score, Daddio
Lou Pallo, a longtime member of Les Paul’s performing trio until the virtuoso’s death in 2009, earned a signature Les Paul model in late 2010. Nicknamed “The Man of a Thousand Inversions,” Pallo played a Les Paul Custom in the Les Paul Trio. However, the Les Paul on which he consulted for its design features a Standard headstock and body but Custom fretboard block inlays including at the first fret. The body wood is natural-coloured mahogany while the top is ebony-painted maple and bound in single-ply binding like the production Standard. The guitar features, unusually, a black-covered P-90 single-coil pickup at the neck—the same pickup that was standard on the Les Paul from 1952 to 1956—and a double-coil Dirty Fingers pickup without a cover but with a black pickup frame at the bridge. The familiar “rhythm/treble” poker chip around the toggle switch is also black, and the guitar features no pickguard. (Interviewed for the guitar’s introduction, Pallo himself said he had actually wanted the guitar to feature a cream-coloured pickguard, cream-coloured Dirty Fingers frame, cream-coloured P-90 cover, and cream-coloured poker chip.) The Lou Pallo model also features a small reproduction of Pallo’s signature in the twelfth-fret inlay. Pallo introduced the guitar at New York’s Iridium club, where the Les Paul Trio played for many years. Pallo explained for a video of the event that he rejected Gibson’s original idea to put Pallo’s signature on the headstock, out of respect to his old friend and partner, suggesting the inlay signature in its place. After introducing the guitar to the gathering, Pallo played the jazz standard “Begin the Beguine” on the instrument.
One reviewer mentioned that anyone wanting to purchase the C40 will need to change the strings to get the best sound out of this model. Another reviewer uses the C40 as their main guitar for composing, and it works quite well for the job. So, overall, if you feel the need to be cost-conscious at this point in time, but want a quality instrument, the C40 should be on your list of models for proper comparison shopping.
I am not a real musician but I feel like one whenever I go in there. I bought my guitar there a few years ago. I have taken it and a travel guitar in there to get re-strung and Pat has always been so helpful and engaging. I follow his FB pages and saw him perform an original song "Will you Take My Name". I was so blown away by the song that I actually proposed to my wife by singing a version of that song. (His version is much better!). He has built a great following in a short time and has a nice selection of guitars and accessories. I really like his frequent FB posts of him showing a guitar he is working on, or a song he sings. Also, he features a lot of customers singing and playing whenever they stop in. This store has a great vibe. If you are in the area, stop in even if you don't anything, you will have fun. And if you need something, well then you've come to the right place!
Throughout the 40’s, racial segregation was still in force across America, however within the music community, (both listeners and musicians) race boundaries were beginning to disappear. African American music (a.k.a ‘Race Music’) was popular with white communities too and with the vast melting pot of musical styles by that point including Folk, Country, Jazz and Delta blues, something exciting started to take shape.
In this section we look at the overall performance of the guitar. How does it feel to play and what does it sound like? The ultimate sound you achieve will largely depend on the amp you play through, but the guitar itself will play a huge part in sounding good. Do the pickups give enough clarity? How comfortable is the neck to get up and down? Is it built for speed? The more expensive a guitar, the better the performance should be, and this is taken into consideration when rating it.
The Dean Custom falls right in the middle-range for guitars under $500. For around $350, this guitar has some great perks such as the Floyd Rose locking tremolo. The beauty of the Floyd Rose is in its ability to keep the guitar in tune even during crazy changes in pitch. Greats like Steve Vai and Eddie Van Halen are just a few notable artists to rock out using the Floyd Rose. With a carved flamed maple top and a lightweight basswood back, this guitar has the looks, the sound, and the ability to keep rocking in tune no matter what you throw at it.
As their categorical name suggests, extended chords indeed extend seventh chords by stacking one or more additional third-intervals, successively constructing ninth, eleventh, and finally thirteenth chords; thirteenth chords contain all seven notes of the diatonic scale. In closed position, extended chords contain dissonant intervals or may sound supersaturated, particularly thirteenth chords with their seven notes. Consequently, extended chords are often played with the omission of one or more tones, especially the fifth and often the third,[92][93] as already noted for seventh chords; similarly, eleventh chords often omit the ninth, and thirteenth chords the ninth or eleventh. Often, the third is raised an octave, mimicking its position in the root's sequence of harmonics.[92]
Taylor 214ce A ‘best acoustic guitar’ list would be incomplete without a Taylor in it. This Grand Auditorium guitar with a cutaway from Taylor projects plenty of volume and has a bright and defined tone that many fingerstyle players love. If you’ve always wanted a Taylor, this one with a solid top will surely stick with you for many years to come.

12 Month Financing: For a limited time, purchase $599 or more using the Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.

Here we have a wonderful made in Japan Takamine from a while back in 1990 this makes it officially a Vintage guitar next year but its tone sounds rich and vintage now! As you will see looking her over this F349 is GORGEOUS!.... better than average condition in all aspects... few only minor doinks here or there but NOTHING to detract from this Taks sound - playability or sheer playing enjoyment... Excellent ALL Mahogany build construction, high AA grade mahogany, masterfully built - fit and finish excellent, neck angle is excellent so action is very good so playing is a breeze and quite enjoyable not all can state this...its 1-11/16ths at the nut so its a nice feeling medium profile " C " shape, frets are very good - excellent can barely tell its been played in fact if you polish them they will be as new...beautiful quality rosewood fingerboard no dead spots or funny buzzes noted...This guitars wood still shines like glass and overall is an outstanding original example with an addition of the best sounding Piezo transducer cleanly installed if I didn't tell you -you may not have noticed but she is also fully electric and sounds amazing amplified I played her threw my Princeton Reverb amp and it truly sounds bold & rich and rings like a bell with the newish Martin strings I installed (I have played this guitar in my office for a short while ) so they should be done stretching and are clean and ready to perform. This guitar is nearing 25 years old so don't expect a brand new guitar this is a beautiful vintage guitar and has personality and patina of a well treated well loved professional grade instrument. Its in excellent vintage condition. JVG Rated 9/10. If you want a rich sounding great playing fun vintage Japanese Dreadnought guitar well this one should put a grin on your face when you open her up and see it. Enjoy! Let me know if interested thanks for looking. Joe contact us at:
Guitar effects pedals are a great way to get started with electronics. The simplest ones only require some basic skills to assemble. The few parts can be easily obtained, and the minimum of tools required can be purchased quite cheaply. Better still is the gratification from plugging it in for the first time and being able to incorporate a pedal that you made yourself into your music. With the skills you acquire, you can graduate from simple to more complex projects; maybe build an entire pedal board of your own effects. Your friends might ask you to build pedals for them too. What you learn can also be put to use with commercial pedals, as you will better understand how they work, and will be able to repair and hot rod old pedals. If you are interested in working at a repair shop, as a guitar tech, or for an electronics company in the future, your portfolio of home built pedals will be a great advertisement for your skills.

Many people "re-amp" direct guitar tracks recorded to a DAW using amp-modeling software, with good results. Plug-ins are wonderfully suited to the virtual  recording environment, allowing for fast access to a plethora of modeling amplifier and speaker cabinet combinations, hence tones, effectively replacing a roomful of amps, cabs and microphones. Programming the virtual amplifier is the same as tweaking the knobs on the real thing, and the same is true for programming software dynamics and effects processors in relation to their hardware equivalents. As the realism and sophistication of modeling technology continue to develop, so does the viability of virtual re-amping as a production technique.

Cool! Yes, this idea is definitely stolen from G&L!It would be cool to see a picture or schematic, but it’s probably going to be really close to this, if not identical. Meanwhile: Don’t be scared to open up your guitar — they’re build for it! Just be gentle till you learn what you’re doing. I always stand by the Maker’s Faire credo: If you don’t open it, you don’t own it. 🙂
So many new guitarists, and even not so new guitarists, play with the volume and tone knobs turned all the way up all the time and then shell out lots of money for pedals when they are not satisfied with their tone before taking advantage of what the guitar can do (and it's a lot). Then of course, your amp's tone controls can refine things even more.
The EC-1000ET is an all-mahogany single-cut loaded with an set of EMG 81 and 60 active humbuckers, a comfortably modern neck and a high level of construction quality. Its key selling point, however, is a fitted EverTune bridge -  unlike other tuning systems, it doesn't tune your guitar for you or offer altered tunings. Instead, once set and tuned, it simply aims to stay there, thanks to a series of tension-calibrated springs and levers. We tried everything we could to knock it out of whack: huge, three-step bends, wildly exaggerated string stretching... we even put the guitar into a freezer. It came back perfectly in tune every single time.  What's more, a guitar that's perfectly tuned and intonated up and down the neck seems to play much more musically. We're not aware of any tone compromises, either. The EC sounds as full and aggressive as ever, with the more mellow tones of the neck EMG being pleasantly rounded, and all bereft of any metallic spring clank. If never going out of tune is important to you, this is one of the best electric guitars going.
I don't have enough good things to say about this shop.  Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings?  Well, this ain't that shop.  James, the owner,  is super helpful and knowledgeable, and stocks his shop with really top quality gear.  I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection).  That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well.  
Guitar is well made. Sounds awesome. The overall height of the strings (in relation to the frets) were not bad. However, it needed to be setup. After having the guitar setup at my local shop, it is so much easier to play (don't have to press as hard on the strings). The Guitar gig bag that comes with the bundle offers zero padding. The Tuner works well, however, since the guitar comes with a built-in tuner, you don't need a separate one. I have not used the dvd that came with it. I use a different set of instructional dvds (purchased separately). Overall a great guitar. Definitely recommend it.

In late 1966, Peter Green had the job of replacing Eric Clapton in John Mayall's Bluesbreakers. Mayall told his producer, "He might not be better [than Clapton] now. But you wait… he's going to be the best." Soon, with the original Fleetwood Mac, he was Britain's most progressive blues guitarist, with a Chicago-informed aggression heightened by the melodic adventure on albums like 1969's Then Play On. Green soon entered a dark age of mental and health problems, returning in the Nineties with more subdued but recognizable gifts.
Desolder the 9V battery connections and attach a 9V centre-negative DC plug to the correct poles on a 3PDT switch; if you’re not sure where to start, purchase a PCB for this online or search for the correct wiring layout. Lead a live and ground wire out from your switch to your vero, and solder them in place where the 9V battery clip was previously soldered in.

Maybe the pickups that came with your guitar are just cheap and not up to your standards. At that point, an upgrade might be less of a stylistic issue and would done for the purpose of improving the overall sound quality of your instrument. In most cases, upgrading the pickups on your guitar are the single most effective way to improve the overall tone and sound quality.
Gibson has produced three Jimmy Page signature models. The first was issued in the mid-1990s. It was based on a stock Les Paul Standard of the time (rather than the more prestigious and historically correct 1958/1959 re-issues issued by the Gibson Custom Shop). The modifications were based on Jimmy Page‘s “#2” 1959 Les Paul, which had been modified with push-pull potentiometers on all four control knobs, as well as mini push-pull switches under the pickguard. This first version of the Jimmy Page Signature did not have the mini-switches under the pickguard, nor did it replicate the custom-shaved neck profile of Jimmy Page’s guitar, but it did include the four push-pull pots. With all four pots pushed down, the guitar operated as normal. Pulling up the volume pot for the Bridge or Neck pickup turned the respective pickup into a single coil, rather than humbucking pickup. Pulling up the tone pot for the Neck pickup changed Bridge & Neck pickups wiring from series (stock) to parallel. Pulling up the tone pot for the Bridge pickup put Bridge & Neck pickups out of phase with each other. The first iteration of the Jimmy Page Signature utilized Gibson’s then-current high-output humbuckers: a 496R in the neck position and a 498T at the bridge.
There are a huge number of different style tone controls in musical equipment; this hardly scratches the surface. If you’re interested in what your tone controls do to your sound, agood place to look is at Duncan’s Amp Pages, where there is a tone stack calculator that shows frequency graphs of several different types of tone controls. Check out for more info.
Fender California Coast Series acoustic guitars are already being used across multiple musical genres by top alternative, indie, punk and grunge artists/bands, such as: Culture Abuse, The Regrettes and Dear Boy, as well as singer-songwriter Aaron Lee Tasjan and guitarist Angela Petrilli – accompanying each on their musical journey toward exceptional artistry.
Even with the myriad finish options, this latest model looks very much like the original Strats from Fender's original production line. As a testament to how effective the original design is, most of the specs and even the hardware design are followed even to this day. Speaking of specs, the current iteration features the same double cutaway alder body and bolt-on maple neck with a scale length of 25.5", narrower nut-width of 1.685" and SSS (Three Single Coil) pickup configuration. Giving this guitar its authentic quack and chime are three V-Mode Strat Single-coils.
Grover Jackson became a partner with Wayne Charvel in the Charvel's Guitar Repair shop in California in the 1970s then Grover Jackson took over the entire business in 1978 and at that time they were making guitars under the name Charvel. Their guitars were tailored to the heavy metal and hard rock genre's of the day. Then a relatively unknown Randy Rhoads, who had just joined Ozzy Osbourne’s new band, contacted them in 1980 with the idea to create a highly customized guitar. That guitar, a new take on the Flying V called 'Concorde' became the first guitar to carry the Jackson brand and the company has been popular with shredders ever since.
The Acoustic Resonance control gives you the option of adding life back in to your sound. Where some pickups, Piezos in particular can sometimes sound “quacky” and hard, due to the fact they only pick up the sound of the bridge area, the AD-10 analyses your pickup signal and recreates the missing body and string resonances accurately to ensure the subtle tonalities of your playing qualities of your guitar are intact.
I have relied on the Sonic Port as a backup rig in case I do have an amp failure. At one point, I kept a Tech 21 PowerEngine 60 on hand to plug my Sonic Port into. Works great for studio and stage work. Again, so much cheaper than AXE-FX which unfortunately, this article plays heavy into spending over $2,000 for the rack mount unit. Don’t forget a decent PA, Monitors, and a Rack to mount it in (another $1000 if not more?). Yea, AXE-FX is sounding worse and worse than bringing a small combo amp..
I have had Tracy do quite abit of work for me many times going back since the 90’s, however, now I am “on my own” living a long way from his shop. He is a super craftsman for sure and I wanted to watch how to do some minor things on my own as well as be able to help educate myself before finding someone locally to work on my guitars in the future. Great explanations and for my reference in future.
My first electric was a Decca, and a friend had one too. Mine was the one pickup style and his had two pickups. This was back in 1972. These were cheap but played very well and I wish I still had mine. There's one on Ebay right now that's just like the one I had, only ten bucks so far. I remember the great sustain and feedback I could get through it playing Hendrix songs!

However, these two companies were not always in as direct competition as might be assumed; yes they both made guitars, basses and amplifiers, but both tended to play to their strengths; Gibson's expertise was it's luthierie; they stuck to high end electric-acoustics, semi-acoustics and skillfully made solid bodies, whilst Fender excelled at electronics; they made amplifiers and easily built solid body basses and guitars.

Jimi Hendrix: Right-Handed vintage white body flipped upsidedown for left-handed use with an oval profile maple-cap neck. The controls and electrics are vintage-modern to ensure stability. The guitar is strung upside down with the strap button on the lower horn, the backwards 68 thick black CBS headstock decal is so that—in front of a mirror—the player sees the guitar as it would appear if Jimi Hendrix played it. As well as this upside-down lefty Strat for right-handed players, Fender also made four exact copies of the Vintage white Stratocaster Hendrix used in many performances, the most famous being Woodstock (1969).

This is like an echo where the sound you play repeats either once or multiple times depending on how you set the pedal. At low repeat settings this fills up the sound which is useful if there aren’t many other musicians. With lots of repeats it sounds rhythmic and huge. This effect relies heavily on the speed of the repeats keeping time with the song tempo. With practice it’s easy to set correctly but get it wrong and it can sound like your chords are running away from you.
"Acousterr's tab maker is a tablature maker application which can be used to write down and compose music. Users can create tabs, play them out, explore tabs created by other users. They can choose any instrument like guitar, bass guitar, piano, ukulele. The sounds are mathematically modelled to be generated at runtime for any combination of notes and effects like hammer on pull off etc for different types of instruments. This gives a beautiful listening experience. Multiple tracks can be added in a single tab which play out simultaneously, so as to simulate an entire song with various parts like bass guitar, lead guitar, rhythm guitar etc. The UX for editing multiple tracks has been meticulously designed to allow tab lines to synchronise easily. With great keyboard support, notes can be easily added and chords can be created on the fly by pressing shift key and selecting multiple notes. Scale helper is there to allow composing solos easily. Designed to work well on mobile browsers too."
Copyright © 2016 Sonoma Wire Works. All rights reserved. RiffWorks and the RW Logo, RiffWorld, RiffCaster, RiffLink, RiffRumble, InstantDrummer, StudioTrack and the StudioTrack iPad App Logo, the FourTrack iPhone App Logo, GuitarTone and the GuitarTone Logo, GuitarJack and the GuitarJack logo, DrummerPack, KitPack and Discrete Drums are trademarks of Sonoma Wire Works. DrumCore and KitCore are registered trademarks of Sonoma Wire Works. iPod, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. ReWire and REX2 are technologies licensed from Propellerhead Software. VST is a trademark of Steinberg Media Technologies GmbH. All other trademarks are property of their respective owners.
While the combination of guitar, amp, effects and technique all play a crucial role in achieving the desired tone, it’s important to choose the right guitar for the job in the first place. There’s a reason why Stratocasters, Teles, Les Pauls and ES-335s have featured on so many classic recordings over the years; it’s because they are as reliable as they are versatile. That said, don’t be afraid to try guitars fitted with more esoteric pickups, such as Gold Foils, for a less generic sound.   P-90s are another great studio weapon; less dense than humbuckers, they can provide plenty of rhythm raunch without crowding the mix.

Wah-Wah: For swishy, rounded sounds that sort of sound like the guitar is wailing, a wah-wah pedal employs a sweeping filter controlled by a spring-loaded treadle, creating quirky frequency boosts as you work the pedal up and down. A famous version of this pedal is marketed by one manufacturer as the “Crybaby,” in an attempt to describe its tone in one word. The late Jimi Hendrix used one of these pedals to great advantage.

Companion to the TG-64 was the TB-64 bass. This was virtually identical to the guitar – including the three pickups and monkey grip – except it was a bass, so it had no vibrato. Two other basses debuted in ’64, the NB-1 and NB-4. These were basically the same guitar as the TB-64 except they did not have the handle cutout in the body. The NB-1 had a single pickup and the NB-4 had two.
As the name implies, TheFretWire DIY 175 kit is based on the popular ES-175 hollow body guitar, following its shape and configuration, but using more cost effective materials. More importantly, it lets you customize your own archtop as you prefer - you can make it into a classic jazz box, or add some cool paint jobs to turn it into a rockabilly style instrument.
Fuzz: A fuzz pedal or "fuzzbox" is a type of overdrive pedal that clips a sound-wave until it is nearly a squarewave, resulting in a heavily distorted or "fuzzy" sound.[53][56] Fuzzboxes may contain frequency multiplier circuitry to achieve a harsh timbre by adding complex harmonics.[57][58] The Rolling Stones' song "(I Can't Get No) Satisfaction", with the main riff played by Keith Richards with fuzz guitar, greatly popularized the use of fuzz effects.[23] Fuzz bass (also called "bass overdrive") is a style of playing the electric bass that produces a buzzy, overdriven sound via a tube or transistor amp or by using a fuzz or overdrive pedal.
Stop tailpieces are usually paired with two types of bridges. The most basic is simply a wooden or metal bar with grooves that strings pass through. Most Gibson guitars come with another of the company’s early electric era innovations, the tune-o-matic bridge. Tune-o-matics have adjustable individual saddles for each string and are therefore more desirable for most players looking to control their instrument’s action and intonation.
If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.
I have a vox valvtronics amp I bought a while ago it has a real preamp tube and loads of very accurate effects great reverb 3 kinds good modulation effects awesome distortion and tube overdrive and very important it is easy to adjust effect level and a power knob that lets you adjust output 1 to 60 watts like a pr attenuator its great so you don't loose that sound of a cranked up amp when you don't want it to loud it also has a easy to use tuner this amp is very user friendly unlike some modeling and effects carrying amps and you can easily adjust effects levels with separate knobs no confusion also a pedal to control effects is available for about 50 dollars is a great studio or small gig still amp and saves a lot because all of the effects it offers its like having a vox tone labe on top of a amp exactly you can sound like van halen led Zeppelin pink floyd lady gaga or the beatles and more and the price is very competitive to all others in its category
Get a Luthier (or do it yourself if you have the knowledge) to change the tuners to the ones I specified, take the sharp edges off the neck, throw some extra light strings on, and do a set up and this guitar becomes a dream guitar for kids or adults for a lifetime. So while the Yamaha APXT2 may not be the best guitar for your purpose, in this price range you WILL NOT find the perfect guitar, period. At least Yamaha gave us a foundation off which to build (which you can't say for other brands) and with a little modification here and there, you will have the perfect little guitar. I bought this for my child and I find myself picking it up and playing it more than my more expensive full size guitars. It's just a pleasure having it around the house, but not so much so before I modified it. There's nothing worse than having a guitar that's just about not a toy as compared to a professional guitar. You want to make your guitar easy to tune and enjoyable to play so spend the extra bucks to make it perfect and you will have no regrets.

Guitar amplifier modeling: Amplifier modeling is a digital effect that replicates the sound of various amplifiers, most often vintage analog "tube" amps and famous brands of speaker cabinets (e.g., the Ampeg SVT 8x10" bass cabinet). Sophisticated modeling effects can simulate different types of speaker cabinets (e.g., the sound of an 8x10" cabinet) and miking techniques. A rotary speaker simulator mimics the doppler and chorus effect sound of a vintage Leslie speaker system by replicating its volume and pitch modulations, overdrive capacity and phase shifts.[95]
The RG (Roadstar) is one of the most famous Superstrat guitars on the market and remains a hugely popular model in all price categories. However, they also produce other collections such as the streamlined S Series (standing for ‘Saber’) and the relaxed Talman collection. Also look out for the Iceman – an edgy original Ibanez design, famously used by Paul Stanley from Kiss.
The cost: The original G&L scheme calls for alternate pot values, but the project here uses the 500K pots found in most humbucker guitars, so all you need are wire, solder, and a few capacitors. On a three-knob guitar, you wind up with one master volume control and two master tone controls, but you sacrifice individual volume controls for each pickup.On a four-knob guitar, you still have independent volume controls, but you lose the independent tone controls.
Your guitar is a model H1213 Archtone made in 1963. Harmony did a great job of stamping model numbers and dates of manufacture on their guitars, but they often require some decoding. The F-63-HB is the date code and the two numbers, not surprisingly, indicate 1963. The “F” preceding the year was often thought to be a fall production indicator while the other letter stamp they would use was an “S,” which researchers thought stood for a spring production instrument. However, a former Harmony employee notified a Harmony database website that it is more likely an “F” stands for “first” and “S” stands for “second.” He explained that Harmony would shut the factory down for two weeks in July and that guitars produced before this break were stamped “F,” while guitars produced after were stamped “S.” The H1213 is the model number as indicated in Harmony’s catalogs and literature. The “3714” is the serial number of your guitar, but little information has been uncovered as to what this series of numbers represents. More than likely, it was a consecutive production number of that particular model for either the first or second half of the year.
The paper presents the results of the modal analysis of six types of structures made from plates. Firstly, was done geometrical modeling of structures, after which they were numerical modeled using shell and solid finite elements. The next step consisted in simulating the structures behavior to free vibration for different thicknesses and materials. The results were processed and compared in... [Show full abstract]
While close-miking can indeed be punchy and muscular, you’ll often find it doesn’t capture the full breadth of your electric guitar tone – that is, it simply doesn’t sound the way your amp sounds in the room. That’s because when you stand somewhere near the middle of any room and play an amp that’s placed a few feet away, several other elements affect the sonic picture. The distance between your ears and the speaker (the “air”), the shape and size of the room, materials used to make the walls, ceiling and floor and/or their coverings, the ways in which sound reflects from them, along with other factors all contribute to how your amp really sounds in the acoustic environment. Most engineers find, therefore, that they need to use some form of distant miking when the aim is capturing a realistic amp tone.
The Professionals - just like the Standards before them - are designed to appeal to a wide range of players with a wide range of styles - which makes this Strat one of the best electric guitars available. The major difference between these new styles, however, is the new single-coil pickups. The basic premise lies in using different rod magnets for the treble and bass sides of the pickups from a choice of Alnico 2, 3 and 5. All the Strat pickups use 42 gauge Formvar wire and are calibrated for their positions, plus the centre pickup is RWRP so the parallel mixes are hum-cancelling. The new neck shape here isn't hugely different from the ubiquitous modern 'C' of the previous Standards; it's marginally deeper back- to-front with a subtly fuller shoulder. Plugging in, this is a modern, clean-voiced Strat that almost sounds like it's been 'produced' to maximise its Strat-i-ness. Where are you going to take it? We find ourselves driving in a slightly different way, pulling back the tones a little to lose some of that edge for rougher tones, while the treble bleed cap keeps things bright as we knock back the volume and hit the pop/funk button.
Without a doubt, dont even entertain the idea of getting one, I was given one by an unfortunate friend who bought one, to try and get it to at be semi playable.. the necks are not even straight, in fact , you could ski off them.....the frets stick out from the side of the neck, the strings are so far off the neck you cannot even fret them down.... There must be no quality control whatsoever in the factory..

We started finding that this type of construction leads to the neck bending (or bowing) after about 6 months. Unfortunately with the traditional method there is not an easy way to adjust it back to normal - once it is bent it's time to get a new guitar! This lead us to re design our classical guitars to use a truss rod. A truss rod is a much stronger example of the bar used in traditional manufacturing, but its main advantage is that it is adjustable. So if in the future you neck begins to bend it can easily be adjusted back into correct shape.
Unbelievable value for money with quality that is second to none The Joey series of electric guitars have been specifically designed for smaller hands, with 3/4 sized bodies and smaller 21.5" fret scale. They are a great sounding, fun guitar and come complete with a built-in tuner to make sounding good even easier. Awesome value as a part of Ashton's
Sounds cool! You’re right that flats are a key to the ’50s Nashville sound. But a lot of guitarists forget that almost EVERYONE used flats until the latter part of the ’60s. Early Beatles, Stones, Who, Kinks, Motown and other R&B, surf, and of course anything jazz-related — it’s all flatwound guitar work till ’66, ’67 or so. Also, the main reason we migrated away from nickel is because the material became markedly more expensive at the end of the decade. (Though yes, some did prefer the brighter tones of replacement materials.)
I have relied on the Sonic Port as a backup rig in case I do have an amp failure. At one point, I kept a Tech 21 PowerEngine 60 on hand to plug my Sonic Port into. Works great for studio and stage work. Again, so much cheaper than AXE-FX which unfortunately, this article plays heavy into spending over $2,000 for the rack mount unit. Don’t forget a decent PA, Monitors, and a Rack to mount it in (another $1000 if not more?). Yea, AXE-FX is sounding worse and worse than bringing a small combo amp..
Next models is another semi-hollow design, only this time we are looking at a bit more neutral guitar. I wouldn’t go so far as to say that it’s somewhere between a solid body and a semi-hollow. That would simply be wrong, but it does have a harder tone for a model of this type. It didn’t take me long to find the right setup, and off we went. Sound, playability – everything is on point.
Some professional-grade amp heads, such as Ampeg's SVT400-PRO, have an audio crossover, an electronic filter that enables a bassist to split their bass signal into a low-pitched signal (which could be routed to a cabinet suited for low-pitched sounds, such as a 1x15" or 2x15" cabinet), and then send the middle and high-frequencies to a different cabinet suited to this register (e.g., a 2x10" or 4x10" cabinet with a horn-loaded tweeter). Amps with a crossover can either have a single crossover point pre-set at the factory (e.g., 100 Hz) or a knob is provided to enable the bassist to select the frequency where the bass signal is split into low and higher-pitched signal. The SVT400-PRO has a user-adjustable crossover knob. Amps with an adjustable crossover point can enable bassists to fine tune the sound of their bass sound. For example, in some halls, a bassist's usual crossover point may sound too "boomy" or rumbly; turning the crossover knob to send more of the low-pitched bass signal through the 2x10" cab may reduce this problem.
This is a FREE service from Credit card NOT required. You can unsubscribe at ANY time 24/7. We value your privacy. We will NEVER rent, sell, or give away your email address to anyone for any reason, ever. By signing up, you agree to receive emails from, including full guitar lessons, newsletter #1 on the next page, and occasionally, product recommendations we feel are worth your time.
Russell is not only one of the hardest working technicians in Dallas but also a classically trained guitarist with a degree in classical guitar performance from SMU. To supplement his income playing classical guitar, he joined the Brook Mays team before finding a home at Charley's Guitar Shop. "Having a background as a player helps with cutting through the issue," he says. "I think the real part of guitar repair is being able to observe what's going on with the guitar but also understanding what the player is going through."

Looking at my beautiful but dusty Les Paul sitting in the corner, I walked over to my bookshelf to choose a book to once again work on my electric. Now, I will say that I am NOT shy about purchasing a book or many, many books if I want to learn something so there was quite a selection to choose from. I had a few books that focused on the electric guitar but for the most part they were incomprehensible or started you off with basic chords and strumming, then turn the page and WHAM! it was Eddie Van Halen time. Just no real steady work up in skills and a lot of confusing jargon. Which is probably why I set the electric aside.

For experienced players, you already know what kind of questions need to be brought up when purchasing a guitar. For beginners, a great starting point is to look at what your favorite guitarists play. By taking your own musical tastes into consideration, you can narrow down your choices to models that will provide the tone and sound you already know and love. But whatever you're looking for, you can be certain that the perfect guitar for you can easily be found, right here. Just take a look around and see for yourself.
Alder used to be very popular in the 1950s and 1960s, and many Fender guitars from that era are made from Alder. Today it is a bit more expensive of a wood, relatively, and isn’t as common. It is lightweight, has beautiful grain patterns, and gives a warm sound with plenty of highs. An instrument made from Alder is likely to have less midrange and bass than instruments made from other types of wood.
Our 4 yr old grandson picked this guitar out and we purchased it for him as his Christmas present, he absolutely loves it. His dad has been teaching him to play it and he said that you can actually plug the guitar into his amp instead of the one that came with it. Our grandson will most certainly grow into this guitar and will get many hours of playtime with this guitar.
Mr Swike appears to know what he is talking about, and has undertaken a body of work that is unfortunately for sale while only being 70% complete. Some of the instructions are incomplete (like showing what North polarity looks like on Stew-Macs polarity tester, but not South), and at least one (the Varistor mod) wildly inadvisable. Why not get the book done, checked out by objective professional parties, and then released as a complete reference book?
Electro String also sold amplifiers to go with their electric guitars. A Los Angeles radio manufacturer named Van Nest designed the first Electro String production-model amplifier. Shortly thereafter, design engineer Ralph Robertson further developed the amplifiers, and by the 1940s at least four different Rickenbacker models were made available. James B. Lansing of the Lansing Manufacturing Company designed the speaker in the Rickenbacker professional model. During the early 1940s, Rickenbacker amps were sometimes repaired by Leo Fender, whose repair shop evolved into the Fender Electric Instrument Manufacturing Company.
For the last tip/technique, I’m going to shift gears and talk about recording acoustic—upright—bass. This may seem more daunting, but many of the same techniques apply—I’ll mention a few quick items that would be specific to the big box. While the dynamic mics I mentioned above might work fine (especially on stage), a good large-diaphragm condenser would be appropriate in the studio, to capture the high end and air of the acoustic instrument as well as the lows. On stage, the relatively low acoustic volume of the instrument may preclude more distant mic positioning, but you can wedge a small (pencil-type) mic into the bridge, with appropriate foam padding, and this, surprisingly, can often provide excellent sound and much better isolation. 
Korg SDD3000 Preamp Clone Great project! Since I finished it, it become one of my always on pedal! With a extremely subtle compression... Eclipse Device-2 DOPAMINE OVERDRIVE based on the Klon Centaur circuit. Materials: 01. Xicon 1% metal film resistors. 02. Kemet 5% MLCC (C0G) 03. WIMA Box Film... Refractor Black Octopus Pedalworx More build reports
More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.
Every ZZ Top tour is a treat for guitar geeks, as Gibbons uses the occasions to unveil a six-string surprise. (Last year it was an elusive Gibson Moderne.) But what really makes Gibbons cool is a certain undefinable quality called “vibe.” Anyone who has ever met Billy and gotten to know him—however briefly—has an outrageous story to tell about the encounter.
C.F. Martin was born in 1796 in Markneukirchen, Germany and came from a long line of cabinet makers and woodworkers. His father, Johann Georg Martin, also built guitars. By the age of 15, C.F. Martin was apprenticed to Johan Stauffer, a well-known guitar maker in Vienna, Austria. Martin returned to his hometown after completing training and opened his own guitar-making shop. However, he soon became embroiled in a controversy between two guilds.
Engl is not particularly famous among US guitarists, and even veterans in the field might be unfamiliar with this hard-to-pronounce name. A good shorthand to give you an idea of what they’re about is to make a mental list of the features most readily associated with German products: good manufacturing quality, reliability, an adequate level of innovation (but only when needed) and higher than average performance.
Basic guitar chords are built using the first, third, and fifth tones of the scale that corresponds with the chord you want to play. For instance, if you want to play a G major chord, you go to the G major scale and find the first, third, and fifth notes in the scale. The G major scale has one sharp (F), so the notes in the scale are G-A-B-C-D-E-F#. The first note is G, the third note is a B, and the fifth note is D. These are the notes you need to make a G major chord. If you wanted a G minor chord all you need to do is make the third note a flat. This system applies to any chord you want to build. These three note chords are called triads and make up the bulk of the beginner open positions chords you’ll use to play a lot of guitar chords songs. When you study these chord shapes, you’ll notice that the root of the note (the first note) usually appears on the lower string and is doubled on a higher string, which reinforces the key tonality.
Whether your style is searing rock or acoustic folk, the right guitar will help you sound and feel like a superstar. From acoustic guitars to electric hybrids to bass guitars, there’s a guitar designed exactly for the way you play. You’ll be rocking out in no time when you choose a guitar from Best Buy’s selection of top brands like Fender, Yamaha, Squier, Schecter, Mahalo, Dean Guitars and more.

It has been said that Barney never played his signature Kays. On the contrary... Barney Kessel has been photographed in concert with the Kay K8700 Jazz Special on multiple occasions, has made appearances at Waldo's Jazz Club on the television classic "Johnny Staccato - Television's Jazz Detective" and has been confirmed by son Dan (who also recorded with the Artist on several famous recordings) to have used the Artist to record countless rock, pop, r&b and blues hits with the most popular performers of the early '60s.
{ "thumbImageID": "Bullet-HSS-Stratocaster-Electric-Guitar-2-Color-Sunburst/H99380000001000", "defaultDisplayName": "Squier Bullet HSS Stratocaster Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Metallic", "sku": "sku:site51372088762678", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Squier/Bullet-HSS-Stratocaster-Electric-Guitar-Black-Metallic-1372088762678.gc", "skuImageId": "Bullet-HSS-Stratocaster-Electric-Guitar-Black-Metallic/H99380000003000", "brandName": "Squier", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "2-Color Sunburst", "sku": "sku:site51372088762608", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Squier/Bullet-HSS-Stratocaster-Electric-Guitar-2-Color-Sunburst-1372088762608.gc", "skuImageId": "Bullet-HSS-Stratocaster-Electric-Guitar-2-Color-Sunburst/H99380000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
{ "thumbImageID": "Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Brown-Sunburst/J73165000002000", "defaultDisplayName": "Squier Strat Pack SSS Electric Guitar with Fender Frontman 10G Combo Amplifier", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Sunburst", "sku": "sku:site51500000053102", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "349.99", "priceVisibility": "1", "skuUrl": "/Squier/Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Brown-Sunburst-1500000053102.gc", "skuImageId": "Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Brown-Sunburst/J73165000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000053101", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "349.99", "priceVisibility": "1", "skuUrl": "/Squier/Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Black-1500000053101.gc", "skuImageId": "Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Black/J73165000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
What if you could get a wide variety of sounds from your acoustic guitar, including complex effects and virtual (MIDI) instruments, without having to use an external amp? That would certainly be a game-changer, as it could essentially turn your guitar into an all new instrument, and by adding to your available 'soundscapes' without needing to be tethered to a plug, it could also convert acoustic performances into rockin' ones.
i have an original 12string vox mark XII and i would like some parts (original or replicas) to repair it. For example the neck(is the right word?)has a surious damage and i want to replace it, also i miss the tremolo stick and the circle black plastic stuff fit the back side. i need some connections all around the world but it could be better if i ll find something in europe. please help-mail me and sorry for my english syntax. dimitris from athens greece.
It mostly comes in black color. it is a right handed 6 string electric guitar. The body is given a polyurethane finish whereas the neck is given a satin finish. The fret board is composed of 24 frets and has a master white tone. The guitar is relatively affordable, with prices ranging from around INR 15,642. For stage performances, this guitar will give you a nice experience and a classical feel.
On, "Sponsored Content" refers to articles, videos, or audio recordings that are produced or curated by an advertiser but that Premier Guitar is happy to share alongside our own editorial content due to the Sponsored Content’s educational, musical, or entertainment value. Sponsored Content is clearly labeled everywhere it appears, and Premier Guitar's editorial department has no involvement in its creation.
the guitar was made for gretsch by Tokai Gakki in the very early 70's.they sound sweet play great, i have one also .at age 40 it needs very little more then a frett job to fix it back to like new. mine is a model 5989. is 6028. I don't hink it is worth much. It''s just an old japaneses import. It is a well made guitar and I enjoy playing it since my other guitar got stolen....
This Charvel is the signature model for Guthrie Govan, widely regarded as one of the finest guitarists around. Its caramelized ash body model is also up there with the finest bolt-ons we’ve ever played. The neck is extremely tight-fitting and held in place with four screws, each recessed into the contoured heel. Like any HSH set up you have huge choice on exactly how you wire it - this is no different. While the outer positions select the full humbuckers, position two voices bridge (slug single coil only) and the middle single coil; position three gives us bridge and neck (both slug single coils); position four offers the screw single coil of the neck pickup with the middle pickup. A ‘secret’ two-way mini toggle that simulates a coil-split via an old-school passive filter (a 0.1 microfarad capacitor). In many ways this feels more like high performance rifle, not a guitar. It gives off a tuned-to-perfection vibe that’s like an instrument you’ve owned for a while, gigged, modified and tweaked. Which in reality is exactly what it is only Charvel and Guthrie Govan have done it for us. But don’t dismiss this as a virtuoso rock shredder axe. Yes, if your technique is up to it, you won’t have a problem there and using just the bridge pickup you’ll probably have all you need: big and ballsy, a hint of a cocked wah-like high end it’s certainly in the JB area. But it’s offset by a pokey PAF-like neck voice, tube-y and soupy but far from one dimensional. If that was it, we’d be smiling. But there’s plenty more... Guthrie Govan’s vision for an all round workhouse that’ll stand up to the rigours of professional touring is superbly realised in this signature. Every detail is wonderfully considered. It’s not a cheap date, but it’s an astonishing guitar: a player’s tool of the highest calibre.
Why We Liked It - Unless you’re looking for an electric guitar to play genres like heavy metal, chances are you would love this guitar. It just makes us happy and it’s hard to put it down. Fender is a good brand and they offer guitars of very high build quality. It’s available in green, blue and red, so you can really get a guitar that matches your personality and music.
{ "siteName" : "/m123", "sourceCodeId" : "61001563", "sourceName" : "DIRECTLOADFORM123", "sourceSegment" : "direct", "richRelevanceMode":"render", "richRelevanceApiKey":"413c08763c06fde6", "richRelevanceUserId":"", "richRelevanceSessionId":"785d526d8cf09e3a1fd9b817617a0e2", "rrBaseUrl":"//", "rrChannelId":"-", "rrMobileChannelId":"586e31c42963afdf", "hashedUserIdForCriteo":"", "rrTimeout":"10000", "rrLoadAtgRecs":"false", "contextPath" : "", "JSESSIONID":"QmiSOEXYx1W3NbqVESzxON2t.m103", "unicaEnv" : "site-devint", "staticContentUrl" : "", "styleStaticContentUrl" : "", "staticVersion" : "ecmd-2018.10.2-0g&cb=3", "versionParam" : "?vId=ecmd-2018.10.2-0g&cb=3", "customerService" : "888-566-6123", "profileID" : "6031423577", "powerReviewsUrl" : "", "contentKey": "site7AVA", "isInternational": "false", "isWarrantyShippable": "true", "currencySymbol": "$", "profileCountryCode": "US", "profileCurrencyCode": "USD", "welcomeMat" : "false" } Skip to main content Skip to footer {"eVar4":"shop by department: guitars","eVar5":"shop by department: guitars: guitar value packages","pageName":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","reportSuiteIds":"music123prod","eVar3":"shop by department","prop18":"skucondition|0||monetaryindex|1||hasimage|1||creationdate|1","prop2":"[m123] shop by department: guitars: guitar value packages","prop1":"[m123] shop by department: guitars","prop17":"sort by","prop10":"category","prop11":"electric guitar value packages","prop5":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","prop6":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","prop3":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","prop4":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","campaign":"directloadform123","channel":"[m123] shop by department","linkInternalFilters":"javascript:,","prop7":"[m123] sub category2"} false
Increasing the bass and treble while reducing or eliminating the centre midrange (750 Hz) results in what is popularly known as a "scooped" sound (since the midrange frequencies are "scooped" out). Conversely, decreasing the bass while increasing the midrange and treble creates a punchy, harsher sound. Rolling off all of the treble produces a dark, heavy sound.

{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: harmony","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
The playing of (3-5 string) guitar chords is simplified by the class of alternative tunings called regular tunings, in which the musical intervals are the same for each pair of consecutive strings. Regular tunings include major-thirds tuning, all-fourths, and all-fifths tunings. For each regular tuning, chord patterns may be diagonally shifted down the fretboard, a property that simplifies beginners' learning of chords and that simplifies advanced players' improvisation. On the other hand, in regular tunings 6-string chords (in the keys of C, G, and D) are more difficult to play.
Just like in a conventional guitar, an electric guitar also has 6 strings with tuning knobs and frets. However, unlike the hollow body and cavity of an acoustic guitar, a solid body usually forms the lower part of an electric guitar. The long neck of the electric guitar consists of magnetic pickups, parts which produce the magnetic field and which are located just below the metal strings. The magnetic pickups are connected to the amplifier with an internal electrical circuit. The long neck of an electric guitar also consists of knobs for adjusting the elasticity of metal strings.
Now, if you're just getting started and breaking strings every time you try to tune up because you hit the wrong octave, then start out with the cheapest strings.  Once you can reliably tune and play without destroying them, you can work you way up.  Once you have the hand coordination, your learning will be accelerated too.  The right tool for the right job, as Old Grandpappy always used to say.  The best electric guitar available will be garbage with the worst strings on the market.  Choose wisely!
While some effects can create a drastic change in a signal’s sound, other effects act more like a coating that add subtle variations of texture rather than a huge makeover. Texture-adding pedals like time-based or ambient effects – such as reverb, delay/echo, vibrato, flanger, and chorus – work best when added to something much more pronounced instead of the other way around (which in a signal chain means they go towards the end).
Gibson announced the new 2012 Les Paul Standard at Winter NAMM 2012. The new Standard features two Burstbucker Pro humbuckers with coil splitting, and Pure Bypass. Pure Bypass gives the option of bypassing the volume and tone potentiometers, sending the signal directly from the bridge pickup to the output jack. The 2012 Standard also features Gibson’s “modern weight relief” as opposed to the chambered body of previous Standards. Other changes include a phase switch and compound fretboard radius.
Post on February 14, 2013 in the RRF Forum:[12] “When John Hall so graciously let me have the license to build Rickenbacker Acoustics back in ’06, I brought a truck to RIC headquarters and loaded it up with all of the remaining wood for Rickenbacker acoustics, in order to free up some shop and storage space in Santa Ana. There was enough undamaged wood for about 40 guitars, and I’ve reached the end of the line with my RIC acoustic builds. I’ve decided to let my license to build Rickenbacker acoustics expire, effective February 1, 2013. All current orders will be built as agreed.

Once you've mastered a few songs on the guitar, you may want to record what you can do so others can hear you shred a wicked solo. Or you may want to use your recording to help improve your skills. In either case, recording your electric guitar outside of a studio can result in poor sound quality that is less than desirable or noise complaints. Depending on your situation and equipment, there are many factors you'll likely have to tweak on your way to getting the best recording, but with a little effort, you'll soon be able to listen to an awesome recording of your musical ability.

{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Black", "sku": "sku:site51296155735782", "price": "129.99", "regularPrice": "159.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black-1296155735782.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }