What? I have an early 90s pe and I've recorded with it and its one of the best guitars I've ever played. Beutifull clean lp tone and ballsy as when you dirty it up. I also have a pro 2 fullarton which with the fender lace sensor pups I put in it, plays and sounds as good as any strat I've played in thirty years. Check the new arias comming out of the states at the moment and they are really awesome looking guitars. There is also a reason the early ones are known as lawsuit guitars as Gibson though they were so good they had to sue them!
• How to check frets: The easiest and quickest way to make sure a guitar’s frets are in good shape is to look straight down the neck of a guitar, from body to headstock. If the frets are at different heights (improper installation is the culprit here with new guitars) or askew, there are problems. They should look uniform and exhibit as little denting or wear as tolerable. 

At the end of 1931, Beauchamp, Barth, Rickenbacker and with several other individuals banded together and formed the Ro-Pat-In Corporation(elektRO–PATent-INstruments) in order to manufacture and distribute electrically amplified musical instruments, with an emphasis upon their newly developed A-25 Hawaiian Guitar, often referred to as the “Frying Pan” lap-steel electric guitar as well as an Electric Spanish (standard) model and companion amplifiers. In the summer of 1932, Ro-Pat-In began to manufacture cast aluminum production versions of the Frying Pan as well as a lesser number of standard Spanish Electrics built from wooden bodies similar to those made in Chicago for the National Company. These instruments constitute the origin of the electric guitar we know and use today by virtue of their string-driven electro-magnetic pick-ups. Not only that, but Ro-Pat-In was the first company in the world specifically created to manufacture electric instruments. In 1933 the Ro-Pat-In company’s name was changed to Electro String Instrument Corporation and its instruments labeled simply as “Electro”. In 1934 the name of Rickenbacher” was added in honor of the company’s principal partner, Adolph Rickenbacker. In 1935 the company introduced several new models including the Model “B” Electric Spanish guitar which is considered the first solid body electric guitar. Because the original aluminum Frying Pans were susceptible to tuning problems from the expansion of the metal under hot performing lights, many of the new models were manufactured from cast Bakelite, an early synthetic plastic from which bowling balls are made.[2]
* Advertised Price Per Month: The advertised price per month is the estimated monthly payment required to be made on your WebBank/Fingerhut Advantage Credit Account for a single item order, or if at any time your account has multiple items on it, then please see the payment chart for payment terms. The advertised price per month will not apply. See Full Cost of Ownership.
Unten ist die Standard-Lage des Stegs für AF-, AFS- und AG-Gitarren. Stellen Sie die Lage ein, um richtige Intonation zu erhalten. AF, AFS, AK TONABNEHMER (PICKUPS) Der Ausgangspegel des Instruments ebenso wie die Signalqualität kann durch die Tonabnehmer-Höhe beeinflusst werden. Die Höhe sollte so eingestellt werden, bis die Lautstärke von Hals- und Steg-Pickup bei voll aufgedrehtem Lautstärkeregler gleich...
Kill Switch A kill switch abruptly stops the sound while it is active and lets the sound play again whilst not active. On guitars with a pickup and pots configuration like that of a typical Les Paul this can be achieved by turning the volume for one pickup off and playing with the pickup selector in the middle position. Whilst holding a note, the player can rapidly switch between middle pickup and the silenced pickup giving a stuttering effect. Do this at your own risk because rapidly switching pickups will inevitably wear your pickup selector. This effect is sometimes implemented by a pedal which is only active while it is pressed down (unlike most pedals which are one click on/one click off). Some people will also modify their guitars to add a dedicated killswitch.
If you are looking for a guitar that is not only surpassing quality levels but also looks classy, Gretsch is the one you require. The company certainly makes some genuinely beautiful instruments that appeal your eyes. Although, some Gretsch guitars come with a considerable price tag, yet they certainly worth the money. Likewise, you can also find several hollow and semi-hollow body guitars at Gretsch that are quite affordable. It means every player from all levels will surely find something of their interest over here.
4) SPAM AND SELF-ADVERTISING ARE NOT ALLOWED. NO ADVERTISING YOUR NEW SUB. NO LINKS TO SOCIAL MEDIA, BLOGS, OR OTHER PERSONAL SITES. This includes the comment area of youtube videos as well as anything that's embedded into the video itself. Your content will be removed!!! NO ADVERTISING EVEN BY PROXY Ask yourself if you're here to post a video of yourself playing guitar or to gain subscribers/fans. If it's the later, you are in the wrong place. We are not here to make you more popular. This means no linking to anything that is commerce related, your blog, web site, bandcamp, facebook, instagram, snapchat, twitter, etc. You can link to your youtube channel, but do NOT have channel plugs/ads in your video, subscription requests, or links to any of the aforementioned, unless you are on our whitelist. If you would like to be considered for our whitelist, message the mods!
After lowering the bridge (usually in a failed attempt at getting lower string action), the owner will eventually realize this is not the best solution. When this happens and a neck reset is preformed, the original bridge will now be *useless* (because it is too low!) The repair guy won't reset the neck to a low bridge, so a new replacement bridge will be installed. At this point the originality of the instrument is compromised.
Martin makes classic guitars that have been featured in countless hit tunes. While they are best known for their top-of-the-line $2,000+ models, Martin also makes great guitars for any budget. Martin guitars always honor their tradition while continuing to strive for a better instrument. Give Martin’s new 17 Series a try if you want to see that theory in action.
This is another budget guitar that is routinely praised for the excellent value for money it provides. Many reviewers point to its playability as its strongest point, which is not surprising given that this guitar is from Ibanez. There were even several people who wrote in their reviews that they liked the GRX20Z so much that they had bought it more than once.
Wow, didn't expect a budget-priced instrument to perform this beautifully! I had planned to use this as an introduction into nylon-string (from electric), then upgrade to a better (i.e. more expensive??) model. That won't be necessary! The NTX700C is absolutely perfect for me and will remain the nylon-string guitar in my stable. I am a professional solo jazz guitarist and ventured into a nylon-string for my Brazilian jazz set. Being an electric player, the transition with this model has been much easier than a traditional classical. The onboard electronics are great with my Bose L1 system. I have the cedar top, and the tone is very mellow, and already opening up with only three weeks of playing.
This book teaches you how to visualize the notes, which will lead quickly to remembering them. Once you know where the notes are, forming chords becomes easier, which leads to fluid playing in any position. At the very least, if you can identify your root notes, you can bail yourself out of trouble at any time. That skill for resolution serves you in improvisation and the random jams that will provide much of your growth.
With JH’s encouragement, I’ve made the decision to produce my own line of premium acoustic guitars, handbuilt as before, to the same high quality, and with an extended option list including other rare woods, finishes, and trim options. The brand I will be using is “Madeleine”, in honor of my late granddaughter who passed away May 2, 2011 at age 1 month.
{"id": "113884849", "categoryId":"site5BAJ", "name":"Used Thunderbird IV Electric Bass Guitar", "pageUrl":"/Used/Epiphone/Thunderbird-IV-Electric-Bass-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Thunderbird-IV-Electric-Bass-Guitar/000000113884849-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"219.99", "priceMin":"219.99", "priceMax":"219.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"80.00", "priceSavingsMaxPercent":"8,000", "inventory":"1", "brand":"Epiphone", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5HBAL,site5LROBB,site5LFML", "stickerText": "Price Drop", "isVintage": "0", "outletonly": "", "checksum":"117352072023", "priceVisibility": "", "itemType": "Used"}
Our original hand made guitar we’ve been building for 32 years that competes with guitars 3 times its price, the 50 Series has all the prerequisites of the traditional American guitar. Compared regularly to Martin D18 and Taylor 5 Series, but with easier playability and a lower price since you’re buying direct from our workshop in Lincoln, Nebraska. For 2018 Denny added a more detailed ivory zipper stripe binding and installed the new 2018 Fishman Isys Plus electronics system to make this guitar truly special. Shipped direct from Denny’s hands to yours. 100% money back guarantee, lifetime warranty.
Virtually all headphone amps offer a full menu of distortion, EQ, reverb, and a host of other digital effects, many of them simultaneously. So a headphone amp can usually double as a multi-effects processor, which is quite cool. Headphone amps also provide numerous presets — sounds preprogrammed by the manufacturer — plus full stereo sound (especially effective over headphones).
Integrated MIDI Learn and automation tools streamline your workflow, while the dedicated Live View makes GUITAR RIG 5 PLAYER the perfect companion when performing. A range of versatile built-in tools assist you in the studio and on stage: A Metronome with different syncing options, two Tapedecks for easy recording and play-along, a Tuner and a Preset Volume tool with Dry/Wet settings are all at your disposal.
The Archtone acoustics were some of the most popular guitars ever produced by Harmony. While production totals are unavailable, we can safely say that tens of thousands of these instruments were manufactured. The Archtone had a non-cutaway body and was advertised as being constructed from hardwoods. These “hardwoods” were actually birch (grained to resemble mahogany and spruce) and maple (grained to look like rosewood) for the fretboard. The binding was actually painted on!

I have achieved my best results with this technique when miking resonant hollow-body guitars, getting the mic in as close as possible to the guitarist's picking hand. Large-diaphragm condensers, especially the Neumann U 87 and Manley Cardioid Reference tube mic, have proven superlative performers on big-box guitars such as the Gibson ES-175 (see photo on p. 114). The small-diaphragm Oktava MC 012 and medium-diaphragm Shure KSM32 have worked wonders on solid-body instruments, most notably on improvisational-guitarist Ron Thompson's seven-string custom axe.
Note that the information presented in this article is for reference purposes only. Antique Electronic Supply makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.
Volume pots are wired as simple voltage dividers. Higher settings have higher resistance to ground and lower series resistance, so more signal passes through. When maxed, volume pot has zero series resistance and full pot resistance to ground. Signal takes the path of least resistance and most of it will go though. However, some signal, mostly treble will be lost. With low pot values (250K) it will be more noticeable than with higher (500K and 1M) pots. That’s why typical pot values for brighter single coil pickups is 250K and for warmer humbuckers 500K or sometimes even 1M.
The OM model came about due to Perry Bechtel, who was a virtuoso plectrum banjo player. Perry came to see the Martin family in the early summer of 1929. He wanted Martin to make him a guitar which he could easily adapt his banjo style (remember by the late 1920s guitar was the hot instrument, replacing the banjo). He requested 15 frets clear of the body and a 27" scale in Martin's largest standard body size (which at that time was the 000, with 12 frets clear of the neck). The 27" scale would retain the fret spacing of the plectrum banjo, and 15 frets clear of the body would closely resemble the length of a banjo neck.
Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.

Wah – This type of pedal was a Jimi Hendrix favorite, and you’ve probably heard the original “Cry Baby” in a lot of music. It was the first wah pedal to find success, and paved the way for others to follow. The Cry Baby is an example of manual wah, controlled by a rocker pedal that adjusts the level of treble response dynamically as you move it. Some modern wah pedals, by contrast, are “auto-wah effects,” which do the same thing but use presets for control instead of live input from your foot.

This bass guitar amplifier features a 20-watt amplifier and an 8-inch driver. It reproduces frequencies from 70 Hz ~ 10 KHz with a total harmonic distortion of 0.5% (typical). It also has a built-in, switchable active compressor. It features a 3-band EQ, with the bass EQ centered at 100 Hz, mid-range EQ at 800 Hz, and a treble EQ at 6 KHz. It features a 3.5mm line output with an impedance of 1 kilohm, for directing the output signal to a mixer, recorder, or another amp. The 3.5mm stereo headphone output will defeat the internal speaker for quiet practicing.
Ovation backed off from its more exotic design directions and in ’77 introduced two more conservative models, the Preacher and the Viper, and its first solidbody basses, the Magnum I and II. The Preacher featured two equal cutaways, whereas the Viper sported more of a Les-Paul-style single cutaway, though neither would never be confused with a Gibson equivalent. Their shape was, in fact, essentially a downsized version of the Ovation acoustic outline. The Magnum shape was derived from the earlier Breadwinner and Deacon, with more contouring.
Non Locking Tremolo FAT/SAT TREMOLO TREMOLOARM-INSTALLATION Der Tremoloarm kann leicht eingesetzt und entfernt werden. Setzen Sie den Arm in die Armöffnung an der Tremolo-Basisplatte. Ziehen Sie den Arm zum Entfernen hoch. TREMOLOARM-EINSTELLUNG (SAT PRO) Zum Einstellen der Höhe des Arms entfernen Sie die Tremolo-Federabdeckung von der Rückseite der Gitarre und verwenden einen 3 mm großen Inbusschlüssel zum drehen der Höheneinstellschraube an der Unterseite des Tremoloblocks.
One of the best known Kay electric guitars during the 1950s was the K-161 "Thin Twin", most visibly used by blues artist Jimmy Reed. This instrument debuted in 1952, and featured a single cutaway body, a distinctive "fire stripe" tortoiseshell pickguard, and a pair of thin blade-style pickups that gave the guitar its name.[citation needed] Kay used this type of pickups on various Kay electrics dating back to the 1940s.
Does anyone have one of either of these that they can comment on? I dig the looks of the silverburst (though I also dig the cream/ivory colored ones), and kinda want to have an SG in my posession (thanks to Zappa!). I have read all the positive reviews of Agiles on here, but few mention the Valkyrie...I'm a little worried that it is in the lower end of their price range, so I'm wondering how the hardware/electronics/fit and finish are....I'm aware it's not going to be crazy high end, but I'd like it to be useable (even though I may swap out some parts). Any opinions? Also, what parts would you recommend swapping out? Would an Epiphone be a better deal in terms of fit and finish and stock parts?

: Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.

While all of the aforementioned stomp boxes (pitch shifter, envelope follower, wah pedal, compressor and overdrive/distortion) should be plugged into the amp’s input, modulation effects can be connected to an amp’s effects loop instead of into its input. Again, this is a matter of taste. Some guitarists prefer the more “pristine” sound quality of modulation effects patched into an effects loop, particularly since this setup can help reduce overall noise.
In 1972, Ovation introduced one of the first production solid-body electric-guitars with active electronics, the Ovation Breadwinner. The model failed to gain widespread popularity, however, and production of the Breadwinner and the Ovation Deacon ceased in 1980. Ovation made several other solid-body models up until the mid 1980s.[28] Since that time the company’s main focus has been acoustic and acoustic-electric guitars.
Okay, maybe you’re not so ambitious and simply want to bash out a decent tune around a campfire. That’s fine — just be warned that doing any John Denver stuff hasn’t been considered cool for a long time. If you are guitar beginner with a guitar in hand already then I may suggest you check out: 10 Amazing Tips to Learn How to Play the Guitar with Good Technique.
That's right, we have another Martin guitar. This time around it's the Martin DCPA4R from their Performing Artist series. This guitar is not really the very best they have to offer, but we feel that it combines all of what makes Martin so unique at a price that isn't impossible to afford. Because there are some insanely priced ones out there from Martin and others, but funnily they aren't the best of the best, just the most expensive.
As far as using the tone knob, it’s all about personal preference, and the quality of the electronics in the guitar (and the amp). Players of less expensive guitars often find that the tone of the guitar becomes “muddy” or “stuffy” very quickly as they turn down tone (or volume), and so they keep the guitar “wide open” with all knobs on their “10” setting. At the least, many players avoid going below “5” on the tone dial, keeping the majority of the midrange frequencies that define the real character of the guitar’s tone.
I’m starting at guitar too at sixty years old, my opinion is that it’s not the guitar, but the time put into practicing, you can dup any type of sound with the features from amps, and guitar processors. You can even make an electric guitar sound like an acoustic. I purchased a line 6 150 watt amp, and a processor from line six, and I can dup any type of guitar sound. I built my own guitar
went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back. when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier. i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.

Every guitar player has their own distinctive sound, and many guitar companies have created artist and signature electric guitar models that were inspired by and/or designed in collaboration with the very best guitar players from the past and the present. Some of the most popular signature electric guitar models we offer here at Sam Ash are the Eric Clapton Strat guitars from both Fender and the Fender Custom Shop, ESP Kirk Hammett guitars, John Petrucci guitars from both Ernie Ball Music Man and Sterling by Music Man, and many more!