Martin’s first era of flirtation with electrics ended with its GTs, and, in terms of American production, wouldn’t resume until a decade later. However, in 1970 Martin joined the growing list of American manufacturers to begin importing guitars made in Japan, introducing its Sigma series. In around 1973, Martin, like competitors Guild and Gibson, began importing a line of Sigma solidbody electrics made in Japan by Tokai.
Do you have a short budget? Then we have included the Dean Vendetta XMT model in my top 10 electric guitars review list. This is very little known guitar and you’d be forgiven if you have never heard of it before. But we can tell you with confidence that once you buy this guitar it will exceed your expectations and this is very much pocket-friendly.
The Supro Spanish Guitar was a non-cutaway archtop built by Regal with electronic components supplied by National Dobro. Except for the fairly modern block-style Supro logo, this was pretty much a typical downscale pressed-top Regal archtop guitar, with a mildly rounded headstock, neck joining the body at the 14th fret, 20-fret rosewood fingerboard, five single-dot inlays, wooden adjustable compensated bridge and a simple trapeze tailpiece. The most distinctive feature was that the guitar had no f-holes. You’ll recall that the ’35 Dobro Electric Spanish was a “conventional” archtop, most likely with f-holes (a comparable National archtop also had f-holes in the beginning, but switched to the non-f-hole design in late ’36 or ’37, following the Supro pattern). The pickguard was typical Regal made of black Ebonoid plastic. In catalog illustrations this appears to have white trim around the edge, but this was apparently company “retouching” to make the pickguard stand out better in the pictures; real examples have plain black ‘guards. The oval, covered pickup sat on a wider oval surround which also held the single volume control. This pickup was nestled down near the bridge. The tuners were Harmony Tune-Rites, with polygonal pot metal buttons. The necks on National Dobro guitars which were entirely made by other manufacturers were glued in. Slightly later, when they began making their own necks and applying them to other bodies, National Dobro Spanish guitars had bolt-on necks.

The modern era of Ibanez guitars began in 1957 [3] and the late 1950s and 1960s Ibanez catalogues [1] show guitars with some wild looking designs [2]. Japanese guitar makers in the 1960s were mostly copying European guitar designs and some of the late 1960s Ibanez designs were similar to Hagström and Eko guitar designs. Hoshino Gakki used the Teisco and FujiGen Gakki guitar factories to manufacture Ibanez guitars after they stopped manufacturing their own guitars in 1966 and after the Teisco guitar factory closed down in 1969/1970 Hoshino Gakki used the FujiGen Gakki guitar factory to make most Ibanez guitars.

This workshop includes: lecture, demonstration and hands on experience in advanced guitar electronics.  Students will study alternate guitar wiring schemes demonstrated by instructor Scott Walker, and stereo wiring and Onboard Effects loop options will also be covered.  This class will focus on signal paths, diagrams, and component selection, in passive and active circuits.  Students will learn about basic preamp design.
If any item fails to meet your expectations at any time, please return it for a refund or exchange. From tuners to endpins, everything we sell at Stewart-MacDonald is backed by our rock-solid guarantee of satisfaction. This is how we do business, ever since selling our first 5-Star Banjo Head in 1968. We proudly continue this tradition by offering quality products and standing behind them.
Market sentiment is overwhelmingly positive, with many reviewers describing how the Seagull S6 Classic M-450T exceeds their expectations. Build quality and playability gets the bulk of commendations, along with its clear sound and good acoustic projection. Some even dare to compare the Seagull S6 Classic with super expensive guitars from major brands.
Make sure it feels comfortable, especially the fretboard and body. Make sure there are no buzzing notes and that the frets are flat and even. Avoid electric guitars with whammy bars as they may be too difficult to tune for beginner guitar players and make the guitar more expensive (maybe one on the next electric guitar you buy). The tuning heads should be easy to tune and stay in place, and try playing the guitar through an amplifier to check for a good sound quality (hopefully no humming or buzzing).
I string up the guitar and tune it to standard pitch. Put the guitar in playing position and capo the first fret. I hold the 6th string down at the last fret as that is where the neck joins the body. Then I turn truss rod right (clockwise) until there is no relief hardly if any bounce at the 7th and 9th frets using the 6th string as straight edge, don't go too far just maybe a slight tiny bounce because you don't want to backbow the neck. Then I simply turn the truss rod left counterclockwise 1/4 of a turn for relief and that's it. Take capo off and set action at 12th fret with 6th string 5/64 and 1st string 3/64.

You might be playing guitar in a cramped garage or a poky bedroom – but it’ll sound like you’re gigging a cathedral when you step on a quality reverb pedal. Reverb brings a sense of space, depth and drama to even the most basic guitar parts, and as this video shows, few effects deliver more atmosphere for less effort. Using the BOSS RV-5 as our demo model, we’ll show you just how flexible reverb can be, running through key controls that adjust brightness, volume and more. Then, we’ll show how your playing can benefit from three different reverb types, whether that’s the vintage sound of spring reverb, the rock-club chug of room reverb, or the stadium-sized shimmer of hall reverb.

Compared to other plastic exterior multi-effects, the RP360 XP feels solid and durable. And this is reflected in many reviews, which mention the pedal's reliability as one of its good traits. Versatility and value for money also came up a number of times, both from pedalboard owners that have downsized, and beginners who are just trying out multi-effects.
Minnesota Public Television has a wonderful program called Minnesota Original ( features artists, artisans and musicians in Minnesota. Recently they did a feature on me and Tim Sparks.  I am very excited and honored.   I hope you will tune in , or at least look at the segment on their web site.
First of all build quality. CTS's sturdy casings, brass shafts and contact patch, solid connections are second to none, and importantly are precision made by a company who have been doing so for a long long time. Fitting a well made pot will mean you'll likely only need to do it once in that guitar, that's important I feel! There are however a lot of different variations of CTS pot, and that is why I now only swear by the 450 Series, and 'TVT' Series, both are constructed with the same components, I like consistency here! Which is why you'll only find these models of pot in my harnesses. I've seen some lower quality series' of CTS pots that have been wildly inconsistent, which I'll get to next..
It’s also worth noting that Fender guitars are typically available with a few different pickup combinations. I’d especially recommend checking out a HSS Stratocaster for rock music. The humbucker in the bridge position gives you a thicker, hotter sound, but you still have all that great Strat tone in the from the neck and middle pickups. I’ve played a Standard HSS Strat for over a decade and it’s one of my favorite guitars.
Pickup adjustments are also very important, and I set the height of my pickups by ear. I typically like the bass side of each pickup to be a bit lower than the treble side, so the wound strings don’t overpower the treble strings. Also, strings generate more energy and volume in the area closer to the neck, so I typically set neck pickups lower than bridge pickups.
The Effect: Even though acoustic electric guitars are generally not associated with various guitar effects, using some can be very beneficial to your tone. Naturally, the types of effects you are going to use will differ from those used with electric guitars quite a bit. The most common accessory in an average acoustic electric signal chain is a preamp pedal. Something like LR Baggs Venue DI is a perfect example. This preamp allows you to boost the signal being fed into the amp or PA, but more importantly, shape it in a way that enhances your tone. Aside from preamps, many guitar players like to use various modulation effects, delays, reverbs and similar. General consensus is that overdrives and distortions are not something you would want to hook up to your signal chain. If you are frequently performing on stage, having even a simple effects chain can be a real game changer.
{ "thumbImageID": "RG550-Genesis-Collection-Electric-Guitar-Purple-Neon/K59743000002000", "defaultDisplayName": "Ibanez RG550 Genesis Collection Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Purple Neon", "sku": "sku:site51500000177727", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Purple-Neon-1500000177727.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Purple-Neon/K59743000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Road Flare Red", "sku": "sku:site51500000177726", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Road-Flare-Red-1500000177726.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Road-Flare-Red/K59743000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Desert Sun Yellow", "sku": "sku:site51500000177862", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Desert-Sun-Yellow-1500000177862.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Desert-Sun-Yellow/K59743000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Gloss White", "sku": "sku:site51500000177863", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Gloss-White-1500000177863.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Gloss-White/K59743000004000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Though the guitar is black, the wood for the top is spruce, with meranti back and sides, and a rosewood fretboard and bridge. This is a full-size guitar (52mm nut), though there is a 7/8” size available. The only thing is, with the 7/8” size you won’t be able to get the black color. The one thing in common between the two is the gloss finish, as well as the types of wood used.
Some effects, and the boxes that produced them, altered musical periods beyond recognition. The valve-driven Watkins Copicat, for example, will forever be associated with the sound of the late 1950s British music “beat” scene. Developed by Charlie Watkins in 1958, this odd machine supported a tape-recording mechanism that would record and play back any sound with varying lengths of delay in-between the replay heads. The device was critical to the rockabilly sound of the late 1950s, the “beat-group” sound of The Shadows, and the Liverpool Merseybeat scene of early 1960s (as well as the Birminghambeat, or Brumbeat scene). The sensation of hearing a guitar warble and wail to its own output encouraged guitarists to experiment with different styles of attack and vigor. For example, the noise that begins and ends the original 1962 recording of “Telstar” by the Tornados was made using the Copicat by creating a loop of echo and reverb effects. This produced what can best be described as some sort of space-echo/attack-helicopter noise.

{ "thumbImageID": "JS32L-Dinky-DKA-Left-Handed-Electric-Guitar-Bright-Blue-Rosewood/J25600000001001", "defaultDisplayName": "Jackson JS32L Dinky DKA Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Bright Blue Rosewood", "sku": "sku:site51436798377279", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Jackson/JS32L-Dinky-DKA-Left-Handed-Electric-Guitar-Bright-Blue-Rosewood-1436798377279.gc", "skuImageId": "JS32L-Dinky-DKA-Left-Handed-Electric-Guitar-Bright-Blue-Rosewood/J25600000001001", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Another classic yet quite rare tone wood, Korina, has a lengthy Gibson pedigree. This elegant, fine-grained wood, also known as African limba, was chosen as the wood for the super-collectible Modernistic Series guitars of the late 1950s, and lives on in the ’58 Explorer and ’59 Flying V available today from the Custom Shop. Korina possesses some similarities to mahogany, particularly in its warmth and resonance, but it also yields degrees of clarity, definition, and sustain that are all its own.

Generally speaking, the amp market tends to be less fueled than other categories by the year-to-year cycle of new product hype that kicks off at the annual NAMM show in January. While there are always hot new models and brands (Quilter amps being a good recent example), amp sales on Reverb are largely dominated by tried-and-true favorites and good deals on used gear.

When looking to buy a guitar, you want to make sure that you’re picking a model that is right for your skill level, playing style, and needs, all that while ensuring that you don’t overspend. If you’re just starting out, there’s probably no need to spend a couple grand on a flashy model when one of the quality cheap acoustic electric guitars will do.
These guitars appear to have lasted through 1989 or so. In 1990 the Stinger line shrank dramatically. Three guitars and two basses were listed in the Guitar World 1990-91 Guitar Buyer’s Guide. The three guitars in ’90 were the SSX, SPX and SSL. These were basically Strats (gone were the arched tops). The SSX now had three single-coils and fixed bridge/tailpiece. The SPX offered two humbuckers with a coil tap switch. The SSL had one humbucker and one single-coil, with a tap on the ‘bucker, and a traditional vibrato.
An excerpt: “Scorned, laughed at, jeered, chided, and derided. The concept of the solidbody electric guitar was subject to such utter disdain in some corners that it’s almost hard to believe it ever came to be at all. The ridicule and mockery would have been enough to send a less self-confident inventor running for the hills. Given our more than 55 years of perspective, though, we know it just had to be; a world without the solidbody guitar? Moreover, without the Gibson Les Paul? Unthinkable ...”
I recognize that these lists are really the preference of the writer and that in itself makes the list valid. However……Robert Johnson at #1? I realize that many people studied him and he was a great guitarist for his era, but he wasn’t even the best guitarist of his era. That title goes to Son House, who taught Robert Johnson. The fact is that you could have had a Clapton without a Robert Johnson. Johnson wasn’t the only player whom Clapton was inspired by.

Most 700 and 800 models, except for bass and probably 12-strings, were equipped with a vibrato bar. After 45 years or so the bar has gone missing on many of them. Some model 820s were equipped with a genuine Bigsby vibrato. The advertisement at left features the Bigsby-equipped Model 820. The advertisement on the right is identical except that it showed the stock Kent vibrato tailpiece. According to the catalogue of the time, the Bigsby was only available on the sunburst model 820.
Yamaha electric guitar is very durable.  However, some of its parts can be damaged by normal wear and tear.  One of the most common parts that can be easily damaged is the output jack.  The output jack of Yamaha guitar is frequently used.  Cables are being plugged into it.  After playing a tune, you will definitely unplug the cable so you can keep the guitar in its case.
Charles Kaman put a team of employees to work on inventing a new guitar in 1964.[2][7] For the project, Charlie chose a small team of aerospace engineers and technicians, several of whom were woodworking hobbyists as well. One of these was Charles McDonough, who created the Ovation Adamas model.[8]Kaman founded Ovation Instruments, and in 1965 its engineers and luthiers(guitar makers) worked to improve acoustic guitars by changing their conventional materials. The R&D team spent months building and testing prototype instruments. Their first prototype had a conventional“dreadnought” body, with parallel front and back perpendicular to the sides. The innovation was the use of a thinner, synthetic back, because of its foreseen acoustic properties. Unfortunately, the seam joining the sides to the thin back was prone to breakage. To avoid the problem of a structurally unstable seam, the engineers proposed a synthetic back with a parabolic shape. By mid-1966, they realized that the parabolic shape produced a desirable tone with greater volume than the conventional dreadnought.[9]
It’s big, it’s brawny and it’s bold—the Reverend Jetstream HB represents a ton of value for its price tag. Although it excels in rafter-shaking rock ’n’ roll tones, this offset guitar has a few nifty tricks that make it more versatile. Add to that quality construction and components, and you’re left with one of the best electric guitars under $1,000.
The old ones were SOLD as cheap guitars. These new ones, at their price points, are probably decent instruments at the very least, and possibly even very good ones. I doubt they have much in common with the Kays from the 70s aside from how they look, which as other people have detailed, is probably just for nostalgia purposes. Lots of aging rockers with fat salaries who might've learned on those guitars a few decades ago!

Ideally, a steel string acoustic guitar or an electric guitar would be the best for you if you want to learn to play blues and classic rock. Classical guitar because of its nylon strings and its warm tone is best played by fingers. If you need help in what kind of guitar to buy, check out our article on different kinds of guitars available for beginners, this might help:
My first guitar, bought out of an advert in Kerrang over 20 years ago. I think it was branded "Axe" and it had absolutely nothing good about it. Some sort of MDF body, horribly bowed neck (couldn't be adjusted as the truss rod was broken), high frets everywhere (you could pull them out with your fingernails, fortunately), slipping tuners, hopeless bridge, hopeless nut, everything. Nearly put me off playing before I'd got started.
The MS-50G lets you use up to six of effects simultaneously, from its large pool of digitally modeled effects (47) and amps (8). And all of the settings and parameters are adjusted via its intuitive interface, albeit with just a single footswitch. You can save each preset you create or edit, just store them into the pedal's 50 memory banks. This flexibility gives you an unprecedented tone options. Other noteworthy features include its built-in chromatic tuner and its versatile power options, which include 2 x AA batteries or via a USB power source.
We think this is one of the best multi-effects pedals as it’s packed to the brim with a range of classic and modern Boss effects. In fact, there’s eight simultaneous effects categories that can work in unison, and each of those categories has multiple effects types within. This means you have access to a vast array of Boss effects as well as COSM amps derived from the Boss GT-100.
In May ’71, Ovation tried once more. It introduced the K-1217 Typhoon V bass, about which no information is available, but based on the Eclipse, the difference may have been pickups. The K-1235 Eclipse was also introduced. This was a guitar offered only in a black finish that looks somewhat like graphite. It had chrome hardware, no binding, dot inlays, three-way select and two volume and two tone controls. The pickups had metal covers with black inserts and a single blade-style pole. In June ’72, all Electric Storms were discontinued except the Tornado and Eclipse, which made it another half year, until January ’73, by which time the Electric Storm had subsided into quiescence.
The Epiphone DR-100 acoustic guitar definitely falls under the category of “entry-level” or “student” instrument, but sound quality has not been sacrificed for the sake of a lower price point. Many guitar instructors urge their students to invest in this model because of its resonant mahogany components. There can be some buzzing because of its lower action, but beginners will have a better learning experience because of the improved tonality. Epiphone is a strong name in guitars, and considering the low price, the DR-100 is a good buy. We recommend it for the mahogany alone, but the tone quality is also appropriate – and perhaps even better than it should be – for the price.
If you like the traditional look of a Fender Stratocaster, but want something a bit more modern with a little more output for heavier blues, rock, and metal tones, the ESP LTD SN-200HT is a fantastic value for the money. You’ll get a great range of tones thanks to the humbucker in the bridge position, and two single coils in the middle and neck positions.
The Effie was also joined by the Coily U1825 guitar and U1835 bass. These were essentially the same except the Coily guitar had a Bigsby-style vibrato, roller bridge with flip-up mute, and a pair of chrome-covered screw-and-staple humbuckers, typical of early-’70s Arias. The Coily bass had similar four-pole screw-and-staple pickups and a fancy trapeze tail with a diamond design on it. These were available in orange sunburst, red and jade green. The guitar cost $122.50, the bass $135.

If you think not using any pedals makes you more “real” or “natural” of a player, you’ve got to be kidding me. Let’s think about what is physically happening when we play electric guitar. The sound is created when a guitar string is plucked by a pick, likely made from some polymer (oh wait, the “real” guys use their thumb, okay) causing it to vibrate. This vibration also creates a corresponding vibration through a magnetic field above your pickups. The pickup converts this into electric current, which passes through a simple low-pass filter tone circuit and a passive volume attenuator (we presume you’re not using an active pickup, being that you’re keeping it “real”) that does some equalization before it even gets to the cable. The standard cable consists of stranded, >99% oxygen free copper wire usually measuring between 18-24 gauge thickness, creating another filter in conjunction with the guitar circuitry based on cable capacitance.

Guitar from Spain is the best online store to buy the best spanish guitars online: Classical guitars, Flamenco Guitars, Acoustic Guitars and electro acoustic guitars made in Spain from the best spanish guitar makers at spanish local prices. These unique guitars will be delivered from our warehouse or from the manufacturer's bench to your door, avoiding extra costs or double margins. Because we only sell guitars from the most reputable Spanish manufacturers, you will be assured to buy only the best spanish guitars available with 2 years warranty and certified from origin. Spanish guitar brands like Alhambra Guitars, Raimundo Guitars, Ramirez Guitars, Admira Guitars, Camps Guitars, Rodriguez Guitars or Prudencio Saez Guitars are among the most reputable and best sounding guitars in the world. These guitars are manufactured in Spain, the land of the flamenco guitar and the classical guitar. At Guitar From Spain you can also buy steel stringed acoustic guitars, western guitars and electro acoustic guitars made with the same traditional craftsmanship and know how acquired through centuries of guitar making. We also have special guitars as Bandurria (Spanish mandolin), Laud (Spanish lute), Cuban tres, timple canario and special sized guitars as Cadete (guitar 3/4) Requinto (Guitar 1/2) and Senorita (Guitar 7/8). Compare our Spanish Guitars with any other "asian made guitars" at the same price and you will be amazed with the diference in quality and sound that you can get. Do not settle for imitations, buy the original, buy Guitars from Spain.
I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.
The Takamine GD71CE is a feature packed acoustic-electric guitar, with its solid top construction, visual embellishments and improved electronics. Takamine equipped this guitar with a solid spruce top and rosewood for the back and sides - a nice tonewood combination known for its articulate sound. It also comes with matching aesthetic appointments that include maple binding for the body, neck and headstock, abalone rosette, rosewood headcap, maple dot inlays, gold die-cast tuners with amber buttons, and the body is wrapped in a nice looking gloss finish. In addition to all this, the Takamine GD71CE is equipped with their TK-40D preamp system which gives you more control over your amplified sound with its mid contour switch, 3-band EQ with bypass and notch filter.
Description: Body: Basswood (Tilia, Linden, Lime) - Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Dot - # of Strings: 7 - Scale Length: 25.5" (65cm) - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch, Grover Tuners - Pickups: Dean - Pickup Configuration: H-H - String Instrument Finish: Metallic Cherry, Metallic Black, Transparent Red
The Triple Crown TC-50 is a three-channel amp, with independent preamps covering clean, low-gain and high-gain ranges. The front panel packs three identical sets of controls including gain, master volume, bass, mid, treble and presence, together with a two-way toggle switch that changes the channel gain and voice. There’s a small toggle switch for manual channel changing, and a pair of master output level controls, one of which is footswitchable. The feature-rich rear panel includes Mesa’s exceptional CabClone speaker-emulated output, with a balanced XLR, headphones socket and line out. The TC-50 also benefits from a footswitchable effects loop, separate reverb level controls for each channel, and MIDI switching for all the major functions. The Triple Crown’s clean channel is highly versatile, going from butter-sweet clarity through to edgy blues soloing, with a lot of control over that ‘just on the edge’ sweet spot. The Lo Gain channel is where the TC-50’s crunch and classic rock tones live, with a multi-layered overdrive and harmonic overtones that shift with varying degrees of pick attack. Flipping the toggle switch into Drive mode adds a subtle midrange bump, invoking JCM800-approved snarl and a dose of extra gain. The Hi Gain channel adds more of the same - lots more, so much so that in the upper reaches we think this is probably the most gain ever from a Mesa amp. No doubt about it, the Triple Crown has three channels packed full of world-class tone that only a handful of amps can compete with.

Excellent explanation! One thing that no one has touched on, yet is the physics of the high frequency components (mentioned above). When you clamp a string at both ends and pluck it it will have a fundamental frequency of waving back and forth based on a) it's length b) it's thickness and c) how tightly it's stretched. All wavering strings, though will have additional waverings. These are referred to as overtones. The first overtone will be a doubling of the frequency and the next a trippleing and so forth. Each of these overtone frequencies contribute to the rich, complex sound of the instrument. Here's a good explanation with pictures. Note the location of the frequency nodes in relation to the placement of the pickups.

Is it not within the scope of eventual computational science to notate the performance aspect of playing the guitar? Sans keyboard, sans human hand - if not by bedroom producers with too much time on their hands, then by AI analysis and pattern matching logic produced by overfunded grad students spending their Silicon Valley parents' fortunes, their AI guitar-licks algorithms trained by analyzing performance records and accelerometer measurements of real virtuoso guitarists performing? Won't a well trained bot eventually turn out some licks that fall within the scope of enjoyable human performance habits?
After the introduction of the Fender Stratocaster Ultra series in 1989, ebony was officially selected as a fretboard material on some models (although several Elite Series Stratocasters manufactured in 1983/84 such as the Gold and Walnut were available with a stained ebony fretboard). In December 1965 the Stratocaster was given a broader headstock with altered decals to match the size of the Jazzmaster and Fender Jaguar.
Superb guitars. Lakewood have both standard and custom production of 12-fret cutaway guitars. Other producers do not offer standard production - except of Taylor, but Taylors at the same price level are made technologically cheaper, resp. at the same quality level are much more expensive. My impression is that Lakewoods have a little bit lively sound than Taylors. I am interested in well made, i. e. with high quality craftmanship, 12-fret cutaways and the brand is not so important for me.
The original Fender Mustang is something of a cult classic. It was loved by alternative bands and players - including Kurt Cobain - in the '90s for its short scale, affordability and potential for modding. The Bullet Mustang is the most affordable version of the model yet. In keeping with Squier’s other entry-level models, it features a basswood body, which gives it an incredibly lithe, lightweight feel. This, combined with its 24-inch scale length, makes it a great choice for beginners. The two humbuckers are the most obvious departure from the original, providing angular grit in the bridge position and a pleasing, earthy warmth in the neck. The bolt-on maple neck and six saddle hardtail bridge feel reassuringly rigid, while the tuners did a sterling job in our tests of holding their pitch without too much hassle. The volume and tone knobs, often a clear indicator of quality control in budget guitars, are installed firmly enough with no evident wobble, while the pickup selector switch is angled so it won’t get knocked if your playing becomes too... ahem... enthusiastic. Meanwhile, the 12-inch radius, rosewood ’board is pancake flat and makes string bends simple for even the most sausage-fingered player. The C profile neck is also extremely comfortable to hold, while the satin finish makes fretboard-spanning licks a doddle. $149/£120 is practically peanuts to spend on a new guitar. For Squier to cram in the features it has, with the overall levels of build quality on display, is seriously impressive.
I've had an Ovation Celebrity for over 5 years. Great action, wonderful sound with or without an amp. Stays in tune. Play anything from classical to rock. The Ovation can do it. The sound is unique, so making it your only guitar may not work if your in a band. If you're a beginner, the string tension is really low so it's easy on your fingers. It is a hollow body accoustic, but it plays like an electric. I've owned and still own several guitars. This is the one I reach for the most.

Unassigned maker badge names are AGS, Alex, Andre, Aquila, Asco, Avon, Axiom, Bradley, CG Winner, Clear Sound, CMI, Columbia, Commodore, Cortley, Crestline, Crown, D. Lewis (?), Danelectro, Dynelectron (some), Diplomat, Dixon, Dorado, Eagle, El Degas, Exceltro, Exper, Encore, Fandel, Garzia, Goya, Grant, Grenn, Laguna, LTD, Magnum (?), Maier, Monroe, Marchis, Mark II, Masaaki (?), Matador, Norwood, Palmer, Prairie, President, Rodeo, Sanox, S.G.C., Splender, Stella, Targa, Taro, Voxton by Vox, and Yoshi. Some of these badges are attributed to the importer as the 'maker', which is untrue. It's possible that some of these badges were made by smaller Japanese manufacturers that have faded into history.

{ "thumbImageID": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "defaultDisplayName": "Epiphone Les Paul Custom PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Alpine White", "sku": "sku:site51321473136588", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White-1321473136588.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51321473136458", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Ebony-1321473136458.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Ebony/H79039000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Who are you to state that Taylor guitars are among the best in the world? Are you from California? I don't and many other don't feel that way. Taylor just does not have the sound of other fine acoustical guitars. I'm not putting Taylor down. It's a well built acoustic but I don't quite like the sound of them. That's a biased and very bold statement you made about Taylor and it's not true. There are so many great acoustic guitar builders around this planet that do build superb guitars. Please, lets not put a Californian Company biasedly on top of everything on the planet. Can we do this please? I apologize for this email but what you stated is so unfair for all of the others guitar companies that build outstanding guitars, worldwide.
While Fender specialize in the single-coil pickup, it’s Gibson who are masters of the pickup in general – and it shows when you browse the chart in our dedicated Gibson pickup article. However, you’ll quickly discover that there is no ‘one Gibson pickup’, as the brand offer a wide range including single-coils and humbuckers, medium and high outputs, and vintage and modern tones. You’ll find different pickups on all of Gibson’s famous models, including the Les Paul, Firebird, SG and Flying V. Perhaps they are best-known for their PAF-style humbuckers – an awesome vintage tone that is well-replicated in their famous Gibson ‘57 Classic Plus.

Original Martin OMs from approximately 1929 to 1931 are extremely rare and sell for high prices. Many guitarists believe that the OM—a combination of Martin’s modified 14-fret 000 body shape, long scale (25.4″) neck, solid headstock, 1-3/4″ nut width, 4-1/8″ maximum depth at the endwedge, and 2-3/8″ string spread at the bridge—offers the most versatile combination of features available in a steel-string acoustic guitar. Today, many guitar makers (including many small shops and hand-builders) create instruments modeled on the OM pattern.[5]

Founded in 1902, Gibson began life producing mandolins and other instruments, before making hollow-body electric guitars in the thirties. Their first solid-body guitar came in 1952 – the Les Paul, which remains one of the most iconic guitars in the world. They are also well known for pioneering some classic guitar shapes such as the SG, the Explorer, and the Flying V. Used by everyone from James Hetfield to B.B. King, Gibson’s are manufactured in three American factories – two in Tennessee and one in Montana.

They are based out of Nashville, TN, and all of their products are made in the United States. The Gibson Les Paul is possibly the most iconic model of guitar ever made. It’s been used by many players throughout the years, and it’s suitable for everything from jazz to rock to metal. Famous wielders of the instrument include: Jeff Beck, Duane Allman, Chuck Berry, Jack Bruce, Eric Clapton, Bob Dylan, Dave Grohl, George Harrison, Tony Iommi, B. B. King, Jimmy Page, and many, many more.
Without a doubt, dont even entertain the idea of getting one, I was given one by an unfortunate friend who bought one, to try and get it to at be semi playable.. the necks are not even straight, in fact , you could ski off them.....the frets stick out from the side of the neck, the strings are so far off the neck you cannot even fret them down.... There must be no quality control whatsoever in the factory..

Theoretically, there is an unlimited number of possible chords. In actual play, you can get along just fine for quite a while with only around 30 chords in your repertoire, and maybe even less depending on what type of music you want to play. There are bluegrass guitar players that have gone through entire careers never playing more than a dozen or so chords.
It will take time to write and update all of the content at once. Come back regularly and I promise that there will be always something new for you to read, the list with essential guitar effects will be constantly updated. If you are just starting out, we recommend going through some online guitar training before you dive in the guitar pedals world.
Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]
Similarly to the previous model, this guitar has a mahogany body as well as a fine looking maple top. What is more, this unit has an elegant metallic gold finish that you might like. Among the features that make it stand out, we feel like it is important that we mention its practical Alnico Classic humbuckers and the fact that it has a Rosewood fretboard. Additionally, it comes supplied with trapezoid inlays.

It is useful to know the fundamental relationship between voltage, current and resistance known as Ohm's Law when understanding how electric guitar circuits work. The guitar pickups provide the voltage and current source, while the potentiometers provide the resistance. From Ohm's Law we can see how increasing resistance decreases the flow of current through a circuit, while decreasing the resistance increases the current flow. If two circuit paths are provided from a common voltage source, more current will flow through the path of least resistance.

Acoustic guitar body sizes and styles differ between manufacturers. The C.F. Martin Company has been at the forefront of setting trends in body styles and sizes, and many companies have followed suit with their standards as a solid foundation,and altering their designs to creat custom sizes and styles. The following describes some of the common acoustic guitar body sizes and styles, and shares a little bit about the sound and tone profiles.   These profiles do not follow Martins standards to a tee, but do exhibit some of the most commonly used acoustic guitar body sizes and styles used, many having been influenced by the Martin Guitar Company.
{ "thumbImageID": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "defaultDisplayName": "Lakland Skyline Deluxe 55-02 5-String Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Maple Fretboard", "sku": "sku:site51274115060918", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard-1274115060918.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "brandName": "Lakland", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cherry Sunburst Maple Fretboard", "sku": "sku:site51274115060902", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard-1274115060902.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard/517707000020063", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst Rosewood Fretboard", "sku": "sku:site51274115060911", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard-1274115060911.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard/517707000064069", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Certainly the most desirable of the Martin body size is the 000, 0M, and D sizes. Many consider the 000 (and OM, which is essentially a 000) to be the ultimate guitar size, where others feel the "D" size is the best. It's personal preference. There are some interesting facts though about the 000 and OM sizes. (In Martin's 1934 catalogue, any flattop guitar that had a 14-fret neck was named an "Orchestra Model", while the older 12-fret design was named a "Standard Model".)
1. Intonation: I have a brand-new Epiphone LP that will not completely intonate on the G, A, and Low E. Fretted notes remain sharp. I have replaced the factory strings with new Ernie Balls and tried every trick in the book to move the saddles as far away from the neck as possible. Many LP owners have this problem. Other than returning the guitar to Guitar World, my only other option is swap out the factory bridge with a wider one. You mention the latter option in one of your early comments, and I've decided to try it. I just bought a Gotoh one online. Hopefully, that will solve the problem.
Another great practice amp in the running for best electric guitar amp for beginners is the Blackstar HT Series HT-1. It’s a 1W tube amp with a single 8″ speaker. It features 2 channels (clean and overdrive), stereo MP3 / line input and external speaker output. It’s use of dual-triode ECC82 tubes provides the crunch and break-up characteristics of a traditional 100w amp at a much lower volume. It also has EQ, Gain and Reverb settings.

If you're in the Boston area and need a repair on your stringed instrument look no further!  I've… If you're in the Boston area and need a repair on your stringed instrument look no further!  I've had Steve repair numerous guitars (4 acoustic, 1 electric) and have had each one repaired better than I could have imagined. Rest assure...if you choose Steve, it is in good hands. His prices are very fair especially for the time and care he puts into his work. As long as he's open for business-go with Steve for all repairs please!!  Great guy, great service!! Read more

Extremely long delay times form a looping pedal, which allows performers to record a phrase or passage and play along with it. This allows a solo performer to record an accompaniment or ostinato passage and then, with the looping pedal playing back this passage, perform solo improvisations over the accompaniment. The guitarist creates the loop either on the spot or it is held in storage for later use (as in playback) when needed. Some examples of loops effects are:

Of course, no-one says you have to use the same mic on each speaker cone. For example the SOS interview with Toby Wright shows an SM57 and an MD421 on separate speakers, and Don Smith mentioned using an SM57 and an AKG C451 on separate speakers when recording Keith Richards. Sylvia Massy Shivy also uses the SM57+MD421 combination, but sounds a note of caution when deciding on the exact positioning of the mics: "You have to be very careful with phase, just check it until the signal is the strongest."
Those influences helped him develop a truly unique rhythm guitar style that no one has been able to duplicate since. Perhaps the coolest thing about Joe Strummer is no one could ever predict what he would do next. In 1981, the Clash played 17 consecutive nights at the 3,500-capacity Bond’s International Casino nightclub in Manhattan, but when they returned to New York the next year they played two sold-out shows at Shea Stadium as an opening act for the Who.
Launch price: $799 / £679 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Maple/pau ferro (dependent on finish) | Frets: 22 | Pickups: 3x Vintage Noiseless Single-Coil Strat | Controls: Volume, 6-position V6 rotary tone switch, tone, 5-way pickup selector | Hardware: 2-Point Synchronized Tremolo, Deluxe locking tuners | Left-handed: No | Finish: Olympic White, Mystic Ice Blue, Classic Copper & 3-Color Sunburst
The Effect: Boost pedals are essentially an extension of your guitar’s volume knob. Their main purpose is to give you additional gain to work with. This extra gain can be used to accentuate your solo sections, give you more girth in your clean channel, or even push your tubes into a slight overdrive. A great example of a booster pedal is the legendary Electro-Harmonix LPB-1.
As jazz-rock fusion emerged in the early 1970s, many players switched to the more rock-oriented solid body guitars. Other jazz guitarists, like Grant Green and Wes Montgomery, turned to applying their skills to pop-oriented styles that fused jazz with soul and R&B, such as soul jazz-styled organ trios. Younger jazz musicians rode the surge of electric popular genres such as blues, rock, and funk to reach new audiences. Guitarists in the fusion realm fused the post-bop harmonic and melodic language of musicians such as John Coltrane, McCoy Tyner, Ornette Coleman, and Miles Davis with a hard-edged (and usually very loud) rock tone created by guitarists such as Cream's Eric Clapton who had redefined the sound of the guitar for those unfamiliar with the black blues players of Chicago and, before that, the Delta region of the Mississippi upon whom his style was based. With John Mayall's Bluesbreakers, Clapton turned up the volume on a sound already pioneered by Buddy Guy, Freddie King, B.B. King and others that was fluid, with heavy finger vibratos, string bending, and speed through powerful Marshall amplifiers.
Besides instrument inputs and speaker outputs (typically via 1/4" jacks), an amp may have other inputs and outputs. These can include an auxiliary input jack (sometimes with its own level control, for a drum machine), "send" and "return" jacks to create an effects loop, a “line out” jack and an extension speaker jack. Practice amps sometimes have a 1/4" headphone jack, or stereo RCA or mini jacks for connecting a CD player, portable media player or other sound source. Some guitar amps have an XLR input so that a microphone can be plugged in for singing. Guitar amps that include a mic input are in effect small, portable PA systems. Some amps, typically bass amps, have an XLR connector to provide a balanced output from the preamp section to go into a PA system or recording input.

The highly resonant basswood body offers a warm tonality which is ideal for the metal fans whilst the high output Schecter Diamond Plus pickups provide everything from crystal cleans to bone crushing riffage when you throw some distortion on your amplifier. Tune-O-Matic bridge with string through body ensures your notes reverberate a lot longer than regular bridges, so those big solos and riffs really stand out. The bolt on maple neck with 24 X-jumbo frets make it an extremely comfortable guitar to play and highly reliable. Ideal for beginners and pros alike.

Sometimes, I find the way that they progress songs odd, and that it actually makes them more difficult by causing you to use screwy timings, use easy and incorrect finger movements that you have to completely change when new notes are added, or when it would be simpler to just use cords (for example, in higher ground there is a part where you first play through and have a G and then an A on the 6th string. A beginner will probably play the G with the index finger and then the A with the ring finger. But later these turn to power cords and this no longer works as you have to slide your hand down. I've found that type of issue common, particularly with this song - I've only played about 6 songs so far in the game). Likewise, the strategy of playing is not always the best, for example they'l play a 2, 3, and 6 on the 6th string and maybe an open 5th string and the 2nd fret of the 5th string. Much easier and more efficient to convert the 6th fret on the E string to the 1st on the 5 string to keep everything within a reasonable reach(cheating by moving the note does work since the game is based on tone, but is not something a beginner would know)
 Great, low priced, vintage Japanese project guitar. May be Decca, Teisco or similar. Has "P90" style, Japanese pickup installed which is not original to the guitar. Solid Mahogany body and neck with Brazilian rosewood fingerboard. Body is perfectly flat and is a thin 1.25" thick. Back of neck profile is very "flat". Top of original bridge is missing and has a wooden one laying in it's place. The pickup is wired directly to the output jack as there are no pots. 3 of the original tuning machines have had their gears changed. All work fine. The headstock logo is missing. We have no additional parts with this one, nor a case or gig bag. Guitar as photo'd only. Would make a great vintage, Japanese, project / player guitar.
If you are a beginner then you probably don't know what a ‘floating tremolo' is. Have a look at Floyd Rose, who made the first models. If you are looking at a guitar that has little tuners on the bridge, then it's probably a floating tremolo. For a beginner, they are a total pain in the butt. They are very hard to tune and a real pain to change strings. The cheaper ones go out of tune a lot too. If you know why you want one, then fine, but locking tremolos on budget instruments are usually rubbish, so stay clear of those for now!
Tailpieces are the end of the highway for guitar strings. Or maybe the beginning, since strings are first threaded through or over tailpieces, or pegged into them, before they are pulled along the fretboard for their big meeting with the tuning pegs. Essentially their function is to anchor the strings, which means most guitar tailpieces must be strong enough to withstand the combined tension of at least six strings without lifting off.

The same goes for Electrovoice's RE20, which counts Steve Albini, John Fry, and especially Glenn Kolotkin amongst its friends. "I like to use RE20s on most amplifiers when they're available", says Glenn, "because the quality is great and they can take really high levels. They're very directional and they're great for rock and roll." The mic also exhibits an unusually wide and flat frequency response and is specially designed to resist proximity effect.
{"pageName":"[gc] pdp: ibanez s421 s series solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114572014;;;;evar65=Used-Guitars-Ibanez","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}
Other defining features include its 3 on a side tuners on a painted headstock, a bound neck and body with trapezoid or block inlays on rosewood or ebony, and its Tune-O-Matic bridge with the Stop Bar tailpiece.  While some of these features are wonderfully cosmetic, the components such as the bridge set-up and pickup selection gave the Les Paul the massive sound and sustain for which the guitar is renowned.
While some Supros were more or less re-branded Nationals, many represented totally unique designs in the Valco line. When the Supro equivalent to the National Grand Console was introduced in 1958, it featured a radically different body design. In place of the National’s conventional all-wood construction, the Supro 1475B Console Sixteen featured two wooden necks connected by three chromed metal rods that ran all the way through each neck. It’s not obvious why this design was chosen; it doesn’t have any advantages other than its unique aesthetics, and I don’t believe it could have made construction any cheaper. The Supro was cheaper than the National – $175 vs $235 – but the difference was likely due entirely to the more “exclusive” name on the National.
I have inherited a heater "H300N" acoustic guitar but I can't find any info on it. The most I could find is that it was from the L. D. Heater Music Company that was based out of Beaverton, Oregon. They were best known for being a distributer of Lyle Guitars. Can anyone else offer additional information or where to find it? It's a bueatiful guitar and I want to know more info before I give it to my nephew or sell it.
On a Les Paul, adjusting the saddle position can be a little tricky while the string is tuned to pitch. Sometimes you can get a screwdriver in there and turn it, but often you need to slacken the string and move it to the side. Also note that sometimes the adjustment screws are at the back of the bridge rather than the front. I prefer adjusting the saddle while the string is slack anyway as there is a lot of stress on both the string and the saddle otherwise.
When guitarists sit around and debate tone, they pontificate on the properties of this instrument or that amp. But frequently there’s a factor in the equation that is forgotten. Our templates of what we consider to be great tone are not simply a formula of instrument + amps + musician. Recording studios also play a vital role in the creation of those sounds.

The noise out of my chain drives me nuts. I want it when I want it, not when all is shut off. I am running a Clapton Signature Strat with humless pickups into my Blues Deluxe. No effects and it is quiet as the dead of night. Plug in the effects (All Boss BTW) and it just starts humming. I have been playing with it and cant seem to isolate the culprit (s)… Frustrating.
The prime advantage of Epiphone is that you get a guitar built to the same specs as the Gibson Les Paul, at a greatly discounted price. With that being said, an Epiphone is not equal to a Gibson simply because it shares the same design. The craftsmanship is where the two brands differ the most, as USA made Gibson’s utilize higher quality materials than the Epiphone line. Epiphone uses a cheaper mahogany in the construction of its guitars, while the electronic components are lower quality as well.

Two full steps down from Drop D. Utilized by bands such as A Day to Remember (on Mr Highway's Thinking About The End, Welcome To The Family, Violence (Enough is Enough), Life Lessons Learned the Hard Way and Sticks and Bricks), In Flames, Hostility, Issues, Static-X, Bring Me the Horizon (since Suicide Season), Hellyeah, Amaranthe, Breaking Benjamin (since Phobia), Parkway Drive, Otep, Spineshank, RED, Bury Your Dead, Eye Empire, Dirge Within, Remembering Never, and occasionally Chevelle, Darkest Hour, Evanescence, 9oz. of Nothing, and For the Fallen Dreams.

“Well, the legends didn’t use pedals.” Whenever somebody says something like this, and you ask them to whom they are referring, they’re often misinformed and factually wrong. “Jimmy Page”. Uh, ever see him use a Tone Bender Mk II? “Jimi Hendrix.” Please feel free to complete a Harry Potter novel while I finish laughing. “Stevie Ray Vaughan.” Ibanez and Maxon should retire a green Tube Screamer colored banner with his name hanging from their company rafters. This list goes on and on. Yes, there are lots of cool dudes back in the old times who didn’t use pedals to help them create some classic tones, but once they had the chance, they chose to.

The Afterneath gets a place on our favorites list, largely because of the "Drag" feature that allows you to sort of delay the decay of your reverb effect, giving off an ambiance that trails off behind each original note as it bleeds into new notes. It's a very unique reverb effect, which blends particularly nicely with a fretless bass in the example video below. 

When gluing a set neck guitar it’s important that you don’t use an excessive amount of glue. The glue should be applied to the base of the neck and base of the neck cavity. Try to limit the amount of glue so that it doesn’t come into contact with the edges of the neck or pickup cavity as this can impact on the tonal quality of the guitar and sustain.
The Website attempts to display product images shown on the Website as accurately as possible. However, The Top Guitars cannot guarantee that the image or color you see displayed on your monitor represents the actual product or conforms to the specifications of the product you have selected. If you have any questions about product appearance/specifications, please contact us before placing your order. The Website does not contain images of each offered item because some of them are Custom and not built and/or modified yet.

Either way, the results in the Descent Reverb are nothing short of phenomenal.  If you watch the demo video below, you'll hear some of the most unique sounds capable of being produced by a guitar pedal. Pigtronix did something similar with delay and pitch shifting in the Echolution 2 Ultra Pro, but we think the combination is even better in the Descent.

Just ask any savvy stompbox builder or low-tuned 7-string player: Sometimes the best way to add power to your low tones is to remove a bit of bass. That’s because the lowest frequencies in your signal disproportionately overdrive your amp and effects. Siphoning off just a bit of bass can add clarity and focus. At extreme settings, the filtering can produce sharp, squawking tones akin to those of a ’60s treble booster pedal (not a bad thing). If you’ve ever grappled with high-gain tones that make your amp fart out, here’s your flatulence remedy.
I use the boss me-8 for 15 years, now with the boss me-25 i have the same kick ass sound plus some more effects and customisations, also it comes with a beutifull surprise that i don't even expect, this guiar pedal is also an audio interfase that suport digital audio via USB, is really amazing you will not regret, it doesn't come whit a power supply only batteries, buy one separatly.

In 1978, Michel Chavarria, guitarist, singer and songwriter for French band Madrigal, decided to create a guitar shop with his friend Daniel Delfour. The shop was on a street called "rue de Laganne," which inspired the name Lâg. Like in many other cases, the small business started as a repair, setting and customization shop before creating its own models. Due to the quality of their instruments, they sell custom-made guitars to French and international musicians like Jean-Jacques Goldman, Phil Campbell (Motörhead) and Keziah Jones. Among the best-known models we have the Arkane (a Super-Strat available with different pickup combinations) and the Roxane (with Gibson-like humbuckers).

Maton JB6 is a 1970s guitar manufactured by Maton. It features a thin solid body, short scale 24 fret design, two humbucking pickups, two tone controls, one volume, in/out phase toggle for bridge pickup and standard three way pickup selector toggle switch. The body has double cutaways, set neck and heavy metal base plate supporting a stop piece and bridge for increased sustain.

{ "thumbImageID": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "defaultDisplayName": "Schecter Guitar Research C-1 Platinum Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Transparent Midnight Blue", "sku": "sku:site51500000239535", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "699.02", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue-1500000239535.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Translucent Black", "sku": "sku:site51364222300326", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "799.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Translucent-Black-1364222300326.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Translucent-Black/H96103000001000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }