The early Silvertone electric guitars were made by Harmony and Danelectro, with a few exceptions. Danelectro had been making amplifiers since the 1940's for Sears, Epiphone and it's own brand. Their manufacturing facility was in Neptune New Jersey. The Dano's started mainly with the infamous "U" series which had the Lipstick pickups and "Coke-bottle" headstocks. Jimmy Page, Jimi Hendrix and many other rock stars got started and continue to play the Dano's. Aside from the very first Danelectros for Sears they all had the Lipstick pickups. That's how you can tell a Dano from the other manufacturers. Danelectro also manufactured the infamous "amp-in-case" models of which I have two examples: a 1964 and a 1968. If you want more info on Dano's go here.
Some guitars incorporate a “blend” of both magnetic and piezo pickups, and others may have one of these options with an internal mic. All nylon string guitars with the option of pickups will always have piezo pickups and/or a built-in mic because there’s no way to sense vibrations from nylon – a non-magnetic material. But, many acoustic electric guitars have steel strings, so what options can you expect with these?
That said, unless the beginner had a specific focus, I never have a problem recommending Line6 spider amps. Lots of options built right in (so you save a fortune on effects you may want to experiment with), and they don’t sound bad at all. I played one a few years back in a rock band and got compliments on my sound all the time, and I put nothing else in the signal path, I played straight in using one of their floor controllers at a gig. I think the whole setup (and this was the 120 watt one) cost me something like $350 bucks.
Our production/assemble time frame: 15 - 25 working days since our professional Control Team and Supervisor Engineer will ensure that your ordered guitar is top notch considering the fact that this guitar is intricate to assemble and they check very carefully every detail such as the finish, fret work, pickups, strings. And also, they will test the sound quality. We do not rush up the process of manufacturing your guitar since we would like to deliver to you best quality performance.

A humbucker pickup is electrically equivalent to two single-coil pickups wired together in series. Coil splitting involves shorting one of the coils to ground, essentially turning the humbucker into a single-coil pickup (not a perfect replica, though, as the magnetic circuits of the two pickup types are different). This is usually done with a DPDT switch, but can also be done with a push-pull pot. Some manufacturers have used a pot to vary the amount of signal shorted to ground from one coil, thus producing a range of tones between a humbucker and a single-coil. Coil splitting results in a sound that's brighter and has less output than a full humbucker. It also eliminates the humbucker's noise-cancelling properties. This modification requires the start and end of both coils to be exposed, which is more commonly available on aftermarket than stock pickups.[17][18]


Firebird is one of those less known, but legendary Gibson models. The 2016 version brings the core of what this bodyshape is all about, with more modern components. Even though my experience with Gibson Firebird is very limited, it’s one mighty guitar. It comes with mini humbuckers, and the sound is pretty unique. You can play anything from rock to metal on this bad boy, without being limited in any way.
Humbucker pickups were designed to deal with hum while also offering tonal characteristics beyond those of single-coil models. This design incorporates two single-coils wound together in series, with the polarity of the magnets arranged opposite each other. This design helps to eliminate hum. Hence it’s name. Humbuckers usually have a thicker, louder, more powerful tone when compared to single-coils. While they are very versatile, humbuckers lend themselves to rock, heavy metal, and jazz styles. Famous guitarists who use humbuckers include Slash, Jimmy Page, Joe Pass, and Duane Allman.

“He played an SG, a Les Paul, a Flying V, as well as a Stratocaster, but he always sounded like Hendrix,” Clive Brown states. “He didn’t suddenly sound like Jimmy Page because he played a Les Paul. That’s where everybody’s perception seems to go wrong. It’s the playing, and not necessarily the guitar.” In spite of an entire multi-million dollar industry revolving around selling musicians the latest gear, and in spite of thousands of axeslingers, aspiring and acclaimed alike, who readily gobble up that gear, it all seems to boil down to two implements— and we’re born with those.


{"eVar4":"shop: accessories","eVar5":"shop: accessories: fretted instrument accessories and parts","pageName":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: fretted instrument accessories and parts","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"electric guitar pickups","prop5":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","prop6":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups: electric guitar pickups","prop3":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups","prop4":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument pickups: guitar pickups","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category4"}
If you’re looking for a unique sound that delivers an exaggerated twang, than the Gretsch G5422TDC Electromatic is the best electric guitar to offer these features. Designed with wider frame and a hollow body, this guitar utilizes “Black Top” Filter’Tron pickups to deliver a dynamic sound that is both bright and focused in its tone. The toggle has three positions that allows the user to customize the balance of the tone, and all strings on the guitar are able to deliver strong intonation due to the Adjusto-Matic bridge. The vibrato tailpiece adds resonance and depth to the sound quality, and by utilizing maple for the body frame there is a clarity provided within the tone that is unique to that design. With a three position pickup, open-back tuners, and a rosewood fingerboard, this retro style guitar provides a high-quality option for musicians alike. Here’s a great G5422TDC video for some samples of that warm hollow-body sound.
This comprehensive set contains the most detailed version of the Yamaha C5 Grand plus a full compliment of performance sounds to cover all your needs from pads, strings, EPs, orchestra, synth, organs, guitars and many other instruments. At 971mb in size (with 592mb dedicated to one outstanding piano with five brightness levels to choose from)  it is designed for the fussy pianist who also wants a full bank of sounds at their fingertips.
Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
My guitar is in excellent condition and is all mostly original. The tuners are replicas of the original Klusons, and it came with non-original wooden legs. The legs were originally `sold separately, so it’s possible that the original owner opted for cheaper off-brand legs instead. I prefer to use a table-type keyboard stand anyway, mainly because it frees up more space for my feet underneath. This is my primary gigging steel; it’s reliable and versatile, and it usually turns a few heads as well due to its unique appearance. Aside from a broken name badge, it’s in excellent condition; it came with the cleanest original Valco case I’ve ever seen. There is some slight deterioration of the chrome plating, but otherwise there is little wear to be found. I previously owned a Supro Console Eight, and liked it so much that I traded it for the double-neck version. The Console Sixteen is a rare bird because it was produced only briefly; it first appeared in the 1958 Supro catalog and last appeared in 1959.
A Direct Inject signal can capture the power-tube distortion sound without the direct coloration of a guitar speaker and microphone. This DI signal can be blended with a miked guitar speaker, with the DI providing a more present, immediate, bright sound, and the miked guitar speaker providing a colored, remote, darker sound. The DI signal can be obtained from a DI jack on the guitar amp, or from the Line Out jack of a power attenuator.
Thanks to its small size and slim neck, you get to play this guitar and improve your skills with ease. The cutaway design also gives you easier access to the higher frets for tapping or other more advanced techniques. This guitar has a spruce top that improves the sound quality as it ages, meranti back and sides, and rosewood bridge and fingerboard.
The D-55 is Guild's dreadnought, very similar in shape to the all-conquering 14-fret Martin on which it's based. However, if your used to a handful in the neck, the D-55 dreadnought makes for quite the contrast: a gloss neck, and slimmer nut accentuating the neck's overall thinness; more a D than a C profile, to invite comfortable first-position chords, aided by an impressively low action. That Adirondack bracing is doing its job, too, because string separation, definition and dynamic range are all notable and it feels loud, alive and resonant when playing soft or hard. If this guitar is anything to go by, the latest Traditional models are absolutely up there with the other big American names, offering superb quality craftsmanship and world-class tone. The D-55 is a potentially serious workhorse that has every likelihood of outlasting and outperforming any one of us as long as we can keep on picking - a sumptuous strummer.
By 1968 (and probably with the union of Unicord), Merson and Gulf + Western, Univox amps had begun to employ a Japanese-made chassis in Westbury-made cabinets, still with the high-quality Jensen speakers. These combined tube output with transistorized components. They were covered with a black Rhinohide vinyl and sported a silver plastic logo with stylized block letters – initial cap with a little tail off the left followed by lower case letters – typical of the earliest imported Univox guitars, on the black grillcloth.
Being the go-to instrument of popular guitarists like Hank Williams Sr. Neil Young and Jimmy Page (just to name a few), the current production model D-28 continues the Martin Legacy in terms of build and sound quality. Finally, all these features are provided without the inherent maintenance issues and crazy price tags of actual vintage models. If you're looking for a true traditional acoustic then your best bet is to go for the Martin D-28. The MSRP is $3299 but you can get it online for around $2,629.
Neck Construction – The neck part of the guitar includes the fretboard and headstock. The tuners are mounted on this part of the guitar. The width and profile of the neck affects the playability of the guitar. Most necks are either “C” or “U” shaped. In most cases, the fretboard is made from a thin layer of rosewood or ebony, but some guitars have maple necks. Fretboard have position dots and other inlaid markers that assist the player. There are generally 3 types of necks – bolt on, set neck and neck through.
While this seems like you’d be stuck on either extreme of the guitar industry, don’t panic. There is a compromise between the two. You can get a guitar with a solid top and laminate back and sides like the LX1E Little Martin Acoustic Electric Travel Guitar. Martin shows you that guitars with this construction tonewood combo doesn’t always mean it’s going to be a poorly-made guitar. However, it does provide enough jump up in quality to improve sound performance while still keeping costs within the affordable range.
Stewart MacDonnald has a great finishing schedule that I would recomend reading before you start the painting process. You shouldn't need to fill any pores on the neck because necks are usualy made from maple which is a tight grain wood. All that's need for it is a sanding with 220 grit paper unless you want to leave the neck natural and unfinished. I recomend using at least a few coats of sanding sealer of clear gloss laquer to protect the wood fromdirt and grime that comes from playing. 

The specifications of the neck and string setup dictate the guitar's overall playability. As such, it is important to get a handle of important specs which include scale length (the length by which the string is stretched from the bridge saddle to the nut), nut width, fingerboard radius, and neck profile (shape of the back of the neck). Beginners normally want guitars to play easier, and will prefer those with shorter scale length, thin nut width and neck profile, and flatter fingerboard radius. On the other hand, experienced players will have grown accustomed to a specific neck configuration, if this is your case, you will want your new guitar to have similar specs to what you already like.
What makes this one of the best electric guitar amp for beginners is Peavey’s TransTube preamp technology which provides a realistic tube amp tone and response, with the price and stability of a solid state amp – the best of both amp styles. Loud enough to rock, yet the headphone jack allows you to rock in isolation without disturbing others. The line in lets you plug in a CD player or mp3 player to jam with your favorite bands. It currently retails for $79.99.
For the last tip/technique, I’m going to shift gears and talk about recording acoustic—upright—bass. This may seem more daunting, but many of the same techniques apply—I’ll mention a few quick items that would be specific to the big box. While the dynamic mics I mentioned above might work fine (especially on stage), a good large-diaphragm condenser would be appropriate in the studio, to capture the high end and air of the acoustic instrument as well as the lows. On stage, the relatively low acoustic volume of the instrument may preclude more distant mic positioning, but you can wedge a small (pencil-type) mic into the bridge, with appropriate foam padding, and this, surprisingly, can often provide excellent sound and much better isolation. 
Hum in pedalboards is usually “ground loop hum.” You have two paths to ground, your audio ground and your power supply ground. You could use an expensive power supply with isolated grounds. But all you have to do is break one of the ground connections. You could disconnect the audio ground at one end of each of your patch cords. Or better, if you use one power supply, connect the hot and ground to only one of your pedals. Clip the ground wire on all the other pedal connections in your daisy chain. The power connections will then get their grounds through the audio grounds. No more hum
Actually, company founder Leo Fender's first business was repairing tube circuitry equipment including radios, phonograph players, and home music amplifiers. He noticed the growing popularity of amplifiers for home music systems and branched out into selling music records and renting out PA systems he had designed from his repair shop. Then he got even more involved in music by making and selling Hawaiian lap steel guitars containing a proprietary pickup system which he bundled with his own newly designed amplifiers in 1945. The following year he changed the company name from Fender’s Repair Service to Fender Electric Instruments Company.
Starting in the early '90s, music gear manufacturers began developing digital effects models that aimed to re-create the sounds generated by classic effects, instruments, and vintage amplifiers. This technology quickly expanded to include models of revered amplifier heads, speaker cabinets, microphones, and even specific microphone placements. Many amps and multi-effects units today incorporate a wide range of models, often grouped into categories such as stompboxes, amps, and mics. Over the last decade, Line 6, one of the leaders in this field, has even created guitars and basses that contain modeled sounds of famous vintage instruments. As the technology has grown more sophisticated, models have become more realistic, often very closely resembling the gear on which they’re based.

Teisco first began importing guitars to the United States under their own brand in 1960. In 1964, the company then switched the name of their U.S. brand to Teisco Del Rey. The company was then sold in 1967, and the Teisco brand name stopped being used for guitars sold in the United States in 1969. Guitars were still sold under the Teisco name in Japan until 1977.

Thinking out loud... what defines electronics then? I've always assumed that the pickups, caps, pots, etc. inside an electric guitar constituted an electronic system. The "guitar's electronics" facilitate a deliberate flow of electrons through a circuit with semi-conductors, etc. Heck, with coils and magnets (and sometimes battery packs), they also provide the electricity that's conducted through the system.
The other switches you might find on a guitar can change the wiring of the pickups from being in series or parallel , or to switch the phase so the pickups are in phase, or out of phase. All the switches are there to allow you to change the tone of the guitar.  Those switches can be toggle switches, or push-pull switches built into the volume or tone control knobs.

The brands we talked about today are considered to be the most trusted on the market. Even so, you might want to skip the bare-bones entry level models as those are bound to come with a flaw of some sort. We showed you a number of guitars from each of the brand’s current lineup. Those represent well rounded and balanced choices for beginners and intermediate players alike.


ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Ressort principal Butée Bloc de vibrato Tige d'arrêt Une fois la guitare correctement accordée, réglez le ressort principal pour faire en sorte que la tige d'arrêt soit en contact avec le bloc de vibrato et la butée. Si la tige d'arrêt n'est pas en contact avec le bloc de vibrato et la butée, réglez la vis de réglage du ressort principal jusqu'à...

There is no real rule on what fretsize is best – it is purely personal preference.  To find out what size is right for you or for a specific guitar and application, you may have to try similar guitars with different fretsizes.  I have heard many differing opinions on fretsize over the years; some say tall wire is too bumpy for sliding into position or that tall wire causes them to play sharp (from overly pressing down the strings, these players are used to feeling fingerboard surface under their finger tips).  Some say that fretwire below a certain height is difficult to bend on.  Bending and fretting hand slurring techniques are easier when the string can be addressed towards the middle of the ball end of the fingertip so that it may be pushed and pulled from the side rather than fretted from directly on top by the lower part of the fingertip. Some folks like a low fretwire as it feels very smooth to them and they don’t do a lot of slurring techniques.
I started by consulting with an old friend, Ken Korman, guitarist of the New Orleans band The O-Pines and a serious aficionado of guitars both expensive and cheap. He gave me some good ideas of what kinds of guitars had hit the market in the last few years and a few models we should consider considering. A walk through January’s National Association of Music Merchants (NAMM) show in Los Angeles gave me further insight.

Neck of the guitar is bolt-on made from maple with a scarf joint for an angled back headstock. Which in turn increases the tension behind the nut eliminating the need for string trees or string retainer bars. Also on the neck are 24 jumbo frets placed on a rosewood fingerboard garnish by sharks fin inlays for the looks and performance of the guitar.
Here I'm going to look at all of the different kinds of pedal available on the market. Hopefully this will help act as an effects pedal guide to beginners who are looking to buy their first pedal, and just don't know where to start. We'll look at the name of the effect, what it does, and an example of the pedal (mostly Boss and MXR pedals as they're probably the best known). Oh, and I won't be looking at any of the niche boutique pedals; that would take ages!
What started as an aftermarket parts company has grown into a real giant. ESP is a brand that is currently building some of the best guitars in the mid range segment of the market. Even though they are often associated with metal scene, ESP offers a wide variety of models. In all honesty, you will rarely find the same bang for the buck that ESP is capable of delivering. On top of that, their guitars are good looking as well.
I've been playing music my whole life, guitar since 16 (>30 years!!!). I'm used to distortion, delay, and some sort of phase for my unique sound. With this little devil, I make my guitar scream and whine like I'm playng straight from hell! Makes me sound almost as evil as I am in real life. For this DIYer, I have some good noise until I can build all my own pedals. Many presets, I only needed to modify two of the for my sound. Now i can sound like the true 80's hardcore punk and thrash metal songs and sounds that I grue up with.
Received it right on time. It was a gift for my best friend and it turned out to be a lot more beautiful than expected. The shade of blue looks real classy and different in different lighting ! Yamaha is known for its magical sound and they maintain their name with this piece too! The guitar comes tuned , and sounds absolutely amazing ! Other website reviews say that it's not as loud, I didn't think so. It has a complete resounding sound that is pleasing to the ears ! My friend went in shock at the surprise and I went in shock with the unexpected high quality ! Definitely recommend, as a beginner or a pro, it's an easy to handle guitar that cradles comfortably between your arms and sounds perfect.
The Line 6 Spider IV is a good option for beginners not entirely sure what they are looking for. The amp models and effects allow it to achieve a wide variety of tones that are appropriate for almost any style of music. The Killer Ant and Hot Rod Pro Junior III do have better tones, but both are more expensive and less versatile. The Line 6 Spider IV is good for guitarists that want to be able to try a bunch of different sounds until they find something they like. It’s a very solid choice for any style of guitarist.
Dick Dale is a prominent Stratocaster player, who also collaborated with Leo Fender in developing the Fender Showman amplifier. In the early 1960s, the instrument was also championed by Hank Marvin–guitarist for the Shadows, a band that originally backed Cliff Richard and then produced instrumentals of its own. So distinctive was Hank Marvin’s sound that many musicians, including the Beatles, initially deliberately avoided the Stratocaster.[citation needed] However, in 1965, George Harrison and John Lennon acquired Stratocasters and used them for Help!, Rubber Soul and later recording sessions; the double unison guitar solo on “Nowhere Man” is played by Harrison and Lennon on their new Stratocasters.[10][11][12][13]
This said, the gig bag itself looks like it is top quality, with properly cushioned straps so you can wear it on your back if you need to, making it a great option for carrying it across town or campus. The only thing is, the listing says the guitar is lightweight, but at 16 lbs, some people would not say this is “light.” At least not compared with some of the more inexpensive models in this review list. After all, the back and sides of this instrument are made of mahogany, which is a hard wood. This makes the guitar more durable, but not easy for some to lift.
With the development of rock, the Tele inspired and sustained yet another genre. Keith Richards of the Rolling Stones has composed many classic riffs on his battered “Micawber” Tele. Iconic are also worn-off green and respectively white Telecasters of the two frontmen of Status Quo, Francis Rossi and Rick Parfitt. Another signature Telecaster player is Andy Summersof The Police. Jimmy Page used a psychedelic-colored 1958 Telecaster, (painted by Page himself, and also known as the “Dragon Telecaster”) on the first Led Zeppelin albums, and also for the lead solo in the 1971 song “Stairway to Heaven“. The guitar had been given to Page by his friend Jeff Beck,[7] who had also been using the Telecaster with The Yardbirds. Bruce Springsteen used a custom Telecaster (with an Esquire neck) off and on throughout his career, both solo and with the E Street Band. David Knopfler, rhythm guitarist from Dire Straitsplayed a sunburst custom Fender Telecaster with white ribboning when with the band.
Hollow: Although a bit more rare than the previous two, it may be exactly what you’re looking for if it fits your style. Hollow body electric guitars sound a lot like acoustic guitars, giving us that brighter sound but having trouble with higher volumes since feedback is likely to occur (especially in medium to higher volumes). It has a round and full tone with great bass response, giving jazz players a big grin when they hear it.
In 1942, Valco unveiled a new Hawaiian lap steel, the Irene, which was offered as a Silvertone in the ’42 Sears catalog. Clearly inspired by the Supro’s first wood-bodied Hawaiian with the pear-shaped body from ’36-37, the Irene had a slightly narrower body and more squared-off corners, and was covered in white pearloid. It also featured a light-colored, painted-on pickguard with dark position markers. Basically, this had the same pickup and control plate as featured on the Clipper.
This multi-effects pedal lets you setup your virtual rig with up to five effects that include various modulation, distortion, compressor, delay, reverb and other effects. They can also run alongside the Zoom G1Xon's built-in amp modeling, which lets you choose between 22 different amps. Those are a lot of features in a small unit, thankfully Zoom implemented an interface that makes tweaking and configuring easier. As expected although you are still limited by two footswitches, it comes with an expression pedal, which adds even more to its value and usability.
The instruments have been set up at the factory. However, time, temperature, and transportation are a few of the many things that can cause a guitar to go out of "intonation". We recommend that you get your new guitar set up by a qualified luthier upon delivery. We recommend taking it to a qualified guitar tech for a set up. They will adjust the neck and bridge to take out the buzzing. We ensure that before shipment there is no evident of fret buzz before shipment and the guitar plays beautifully since our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. We believe that your Local Guitar Shop can properly and safely adjust the truss rod and setup the guitar correctly for issues of fret buzz and bow neck. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod.
Delay – a time-based effect that sounds like an echoing of your guitar tone. A delay pedal creates a copy of your guitar tone that repeats like a fading echo. Delay pedals usually have a time knob that allows you to choose the time of the delay intervals, an effect level knob that controls the volume of the delayed sound and a feedback knob that controls how many repeats are sounded before the effect fades. See different types of Delay below:

Comes with hard case.This is the iconic Yamaha apx-6a. Made in the 1990s it has the iconic Yamaha AMF preamp/Eq system. This specimen is in overall faircondition for a guitar that is over 20 years old. It has normal scratches and other sings of wear. Shipping is free. Estimated arrival is 4-8 business days. A signature is usually required at the time of delivery.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(574) 247-0131, visibilitySalePrice=299.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, invMsgBackOrdered=false, displaySku=113206695, stickerUrlLink=null, skuPriceVisibility=1, kitCarouselSkuIds=null, invMsgAvailability=, availableDate=Thu Oct 25 07:28:45 PDT 2018, stickerURL=null, serialized=false, listPrice=399.99, name=Sunburst, isShipsInternational=false, storeCity=Mishawaka, partNumber=null, invMsgBuyToDemand=false, inventoryStatus=1000, storeName=Guitar Center South Bend, newPrice=299.99, status=instock, priceDropPrice=100.00, condition=null, stickerText=Price Drop, stickerClass=stickerEmphasis, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, prop65=null, usedGrade=Good, salePrice=299.99, warranty=false, wasPrice=399.99, isOnSale=false, stickerDesc=Price Drop, displayId=113206695, storeId=620} 299.99 USD
Matsumoku is one of the Japanese manufacturers that did not survive long after the heyday of the 1970s guitar market despite having a long tradition of quality stringed instrument craftsmanship. Matsumoku produced guitars for major manufacturers Greco, Guyatone and Yamaha. Matsumoku made Arai, Aria, Aria Pro II and Aria Diamond badges, with Aria being their primary badge for a majority of this time frame. Badged guitars known to have been made by Matsumoku include Apollo, Arita, Barclay, Burny, Capri, Columbus, Conrad, Cortez (electrics only), Country, Cutler, Dia, Domino, Electra, Epiphone, Granada, Hi Lo, Howard, Ibanez, Lindberg, Lyle, Luxor, Maxitone (this guitar differs from Tama's Maxitone badge), Mayfair, Memphis, Montclair, Pan, Pearl (electrics only), Raven, Stewart, Tempo, Univox ,Vantage, Ventura, Vision, Volhox, Washburn (in 1979 and 1980), Westbury, Westminster and Westone. Possible Matsumoku badges include: Bruno, Crestwood, Conqueror, Eros, Mako, Memphis, Orlando and Toledo.
New Mooer Red Truck Multi Effect Pedal. Mooer Red Truck. The Mooer Red Truck is one of the most full-featured effects strip on the market. Featuring several effects modules within one unit, this is designed for players who prefer the simplicity of single effects over multi-effects and want a portable solution for rehearsals, gigs, or where carrying a lot of gear is an issue.
Founded in 1902, Gibson began life producing mandolins and other instruments, before making hollow-body electric guitars in the thirties. Their first solid-body guitar came in 1952 – the Les Paul, which remains one of the most iconic guitars in the world. They are also well known for pioneering some classic guitar shapes such as the SG, the Explorer, and the Flying V. Used by everyone from James Hetfield to B.B. King, Gibson’s are manufactured in three American factories – two in Tennessee and one in Montana.
A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.
Another name that is usually associated with PRS is Carlos Santana. He has a number of guitars that bear his name, and this one is probably the most popular one. It’s affordable, sounds great and plays like a dream. After mere hours playing it, I’ve realized just how expressive you can be with it. It impressed me enough to take a high place on my list of guitars that I have to get. Needless to say, it didn’t take me long to make one a part of my collection.
In the first part of this two-part article, we look at the original five-way switch and find it lacking for some uses. The 2-pole super-switch steps in to help, and we look at how we would go about wiring a Strat in the standard way using that switch. Once we’ve understood that, we go on to create an interesting alternate wiring scheme for a Strat that wouldn’t be possible with the standard 5-way.
An "effects chain" or "signal chain" is formed by connecting two or more stompboxes. Effect chains are typically created between the guitar and the amp or between the preamplifier ("preamp") and the power amp. When a pedal is off or inactive, the electric audio signal coming into the pedal diverts onto a bypass, an unaltered "dry" signal that continues on to other effects down the chain. In this way, a musician can combine effects within a chain in a variety of ways without having to reconnect boxes during a performance.[10] A "controller" or "effects management system" lets the musician create multiple effect chains, so they can select one or several chains by tapping a single switch. The switches are usually organized in a row or a simple grid.[11]
Bridges and Tailpieces – These two parts of the electric guitar work in unison to control the tone and playability of the guitar. The bridge is mounted on the lower portion of the guitar. The strings are routed over the bridge before ending in the tailpiece. Bridges help to tune the strings of varying length, thickness and metals and they allow easy adjustment of the string length.
Here we have a well aged Vintage Washburn D12/br from 1989 its a D-18 type with a cedar top and man does this cedar top sound great…it was surprisingly sound and deep for a late 80s it has a mature balanced tone…I like it with its pretty good bass response and all. Its structurally great no cracks and no playability issues what so ever its neck and alignment integrity is also excellent as the action is good and the guitar is as a result easy to play. Cosmetically this guitar has been around the block its no sissy its stood the test of time and its previous owner and still all in all with all its obvious nicks and scratches and various doinks man it looks pretty darn vintage COOL and I loved it I thought you might like it too just take a good look for yourself if your the type that likes a well warn in vintage guitar and you don't really mind that it has some extra character and soul this just may be a guitar you might appreciate….. its own beauty from life playing and enjoying the music experience this guitar has been well loved and played yet it is no where near warn out it has years of life left in her she just wants to really sing for someone and in my assessment she’s ready to be enjoyed for another 30 years or more! Very cool vintage Washburn Dreadnought guitar. Its neck is straight and has the proper relief its Tuners are real good sealed gears and doing an excellent job to this day, This one has the medium slim taper neck with the Diamond volute like the old Martin style…nice touch Washburn. Mahogany Back and sides and neck with rosewood fingerboard its neck width is 1-11/16ths at the nut. This a a well built good player folks if you don’t mind it not being exactly mint cosmetically its actually beautiful in its own vintage appeal. Any questions or to make the purchase you can contact Joe at: JVGuitars@gmail.com.
In the 1970s and ’80s the sound of the electric guitar was stretched in heavy metal music. As one of its leading practitioners, Van Halen pushed his self-built “Frankenstein” (based on a Stratocaster but with a mish-mash of other guitar parts) to the limit, experimenting, for instance, with “dive-bombing,” which uses the tremolo arm to drive the guitar’s lowest note ever lower. Hendrix had done this but forced the guitar out of tune as a result. However, by the mid-1980s, inventor Floyd Rose had improved the tremolo system, allowing players like Van Halen to dive-bomb repeatedly. The guitar sound was now not only loud but also really raucous, flashy, and a bit dirty—just the way musicians, and their fans, wanted it.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: agile","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"martin","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
John Fahey, who died in 2001 at age 61, was American folk guitar's master eccentric, a dazzling fingerpicker who transformed traditional blues forms with the advanced harmonies of modern classical music, then mined that beauty with a prankster's wit. "His music speaks of a boundless freedom," says ex-Captain Beefheart guitarist Gary Lucas. In the Nineties, Fahey switched to a spiky minimalism on electric guitar that made him a post-punk icon. "To be validated by John Fahey," says Thurston Moore, "was really special for our scene."
Reverb works well for acoustic guitars because it's a less intrusive effect that doesn't overtake the clean signal. Echo and delay pedals can be more difficult to tame from a feedback perspective, especially when the echoing trail gets too long. With reverb, you can have a thick effected layer with a relatively short trail behind it, especially with the HOF's short/long switch. 
I got this lyle acoustic (w-400) for $40 at a yard sale - it is THE MOST INCREDIBLE GUITAR you could ever ask for - looks just like a martin d-18 - solid spruce top - sweet figured mahog b&s's - back of headstock even has the valute like a martin - just kicks my buddies real d-18 to pieces - he's so jealous - if you get the chance to own one don't pass it up - it will probably be too cheap to pass up and you WILL regret it later (like I have been kicking my own ass for decades for passing up a 60's Gibson byrdland for $400)
It’s important to remember that these setups are not set rules that must be followed.  You can get a variety of unique sounds by placing your effects in unorthodox locations.  It’s common to run into that special sound that came about as a ‘happy accident’ when setting up your effects.  Using these suggestions, you can build up your own pedalboard to suit your individual taste.
One cheaper ampless option mentioned in the article is the Tech 21 Fly Rig used with pedals in front of it – I actually got a $270 Tech 21 RK5 (very close to being the same thing as the Fly Rig 5 mentioned in the article, but the Richie Kotzen signature version with his signature OMG distortion replacing the “Plexi” OD which is on the Fly Rig 5). I’ve used it direct into a cheap PA at practice and it doesn’t sound good to me that way – however, it sounds really pretty good going into an amp, which is what I did for a set-up-quick-and-get-out-after-playing hour-long gig a few weeks ago, plugging into an amp provided at the place we played at. It still didn’t come close sound-wise to my relatively cheap amp setup (hybrid Marshall JMD 50 watt head into Marshall 1960A 4 x 12 cabinet, no additional effects), but a lot more portable of course. So maybe I need to experiment with adding OD pedals to the RK5 for an improvement in sound.
Whether you’re looking for the best acoustic electric guitar for beginners or a more advanced model, there are so many options that it might be tough to make the right call. If you want to learn more about some of the most popular guitars but don’t have the time to do your own research, then you can count on us to help you out. We’ve scoured the market and compared countless acoustic-electric guitars so we can recommend the best. Our top choice is the Epiphone Hummingbird Pro.
Martin also developed a line of archtop instruments during the 1930s. Their design differed from Gibson and other archtops in a variety of respects–the fingerboard was glued to the top, rather than a floating extension of the neck, and the backs and sides were flat rosewood plates pressed into an arch rather than the more common carved figured maple. Martin archtops were not commercially successful[citation needed] and were withdrawn after several years. In spite of this, during the 1960s, David Bromberg had a Martin archtop converted to a flat-top guitar with exceptionally successful results, and as a result, Martin has recently begun issuing a David Bromberg model based on this conversion.
guitar brands german guitar brands best korean guitars korean guitar factory korean guitar manufacturers korean guitar to ukulele manufacturers south korean guitars korean guitars acoustic all electric guitar brands good quality guitar brands acoustic bass guitar brands electric bass guitar brands quality acoustic guitar brands acoustic electric guitar brands good guitar brands More...
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! VoteinNovember
×