This has changed with the introduction of the 2018 Gibson Les Paul Studio, which now has white neck binding. Apart from this cosmetic addition, there are other new features. It has cryogenically treated frets, which means the fret wires have been exposed to extreme cold before they were fitted on the guitar’s rosewood fingerboard. The result? More durable frets that don’t wear out as quickly as regular frets.
JAZZ :Al Di Meola , John McLaughlin ,Wes Montgomery ,Pat Metheny ,John Scofield,Django Reinhardt ,Larry carlton ,Joe Pass,Herb Ellis ,Eddie Lang , and again I still have in mind at least 10 more jazz guitar players that jazz is the hardest and more complex guitar composition and it is an awesome style or kind of music to play just because not everybody play can play jazz.
For several years now Godin have been producing some of the most sonically versatile guitars available with their combination of regular pickups, piezo pickups and synth pickups built into their higher end guitars. Note that the synth pickups are 13-Pin and compatible with the Roland GR series guitar synths - if you want MIDI you have to first plug into a Roland synth then take the MIDI out from the synth.
Now, these are known as Shaggs models because they’re what the Shaggs played, not because of some big corporate endorsement deal! No one knows who sold the Avalon brand. Mailorder? An area music store? An auto supply store? All possible. Nor who made them. Nothing like them shows up in the reference books. I’m not even sure when they were made, but 1967 or ’68 is a good guess. Japanese guitarmakers were competing with the Europeans early on in the 1960s and some of the earliest ‘copying’ was of European models.

A tabletop unit is a type of multi-effects device that sits on a desk and is controlled manually. One such example is the Pod guitar amplifier modeler. Digital effects designed for DJs are often sold in tabletop models, so that the units can be placed alongside a DJ mixer, turntables and CD scratching gear.[17] For a DJ, a pedal located on the floor would not be practical because she/he would find it hard to adjust the knobs.
Note that the information presented in this article is for reference purposes only. Amplified Parts makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.
The Vox T-60/AC-100 bass amplifier uses two 15-inch cabinets and thirty-to-forty watts of solid-state power using "germanium transistors".[5] The Sunn Model T was used by The Moody Blues, Kiss, Queen, The Who's John Entwistle and Rush's Geddy Lee.[5] The Sunn used a 150-watt amp with "four 12AX7WA tubes, followed by two 12AX7A tubes, and powered by four 6L6GC tubes".[6]

Les Pauls are all about that heavy metal feel and heavy weight. When they were first introduced, they had two p-90 single coil pickups. Today, they use double humbucker pickups for outputting a thick, sustainable sound. Like Tele and Stratocasters, they have a single cutaway shape. Heavy rock musicians love Les Pauls. Fender offers an affordable range of Les Paul electric guitars compared to Gibson, but Epiphone by Gibson is a hot item for the beginners.

This pedal has been a great start, it has been looked after very well and is in excellent condition. I am upgrading my sound which is the reason for the sale. “Great guitarists know it's all about nuance. With its built-in expression pedal, the Zoom G1Xon allows you to add subtlety and refinement to your performance. Add in 100 great-sounding guitar effects and amp models—with the ability to use ...
Searching for something to give them a boost, in July ’68, Ovation introduced its first electric guitars – the Electric Storm series. Two models were available initially, the Thunderhead and the Tornado. These were f-hole semi-hollowbody thinline, equal double-cutaway guitars with German-made bodies, bolt-on Ovation necks, and Schaller hardware. Most had Schaller pickups with metal covers, a row of poles along each edge, and split, small, black inserts in the middle. Each was available with or without vibrato.
The noise out of my chain drives me nuts. I want it when I want it, not when all is shut off. I am running a Clapton Signature Strat with humless pickups into my Blues Deluxe. No effects and it is quiet as the dead of night. Plug in the effects (All Boss BTW) and it just starts humming. I have been playing with it and cant seem to isolate the culprit (s)… Frustrating.
{ "thumbImageID": "Stiletto-Extreme-4-Bass-Black-Cherry/528006000127000", "defaultDisplayName": "Schecter Guitar Research Stiletto Extreme-4 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51274115040562", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "639.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Stiletto-Extreme-4-Bass-Black-Cherry-1274115040562.gc", "skuImageId": "Stiletto-Extreme-4-Bass-Black-Cherry/528006000127000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "See-Thru Black", "sku": "sku:site51274115040814", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "639.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Stiletto-Extreme-4-Bass-See-Thru-Black-1274115040814.gc", "skuImageId": "Stiletto-Extreme-4-Bass-See-Thru-Black/528006000011000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Great article and very enlightening comments too. One thing I’d like to add is that it seems to me that a considerably large expense is necessarily involved in going the ampless route i.e. Axe FX + midi controller at the least, in an Axe Fx setup. Granted, amp setups can be just as expensive or more expensive, but cheaper amp options are available.
The EB-18 was a bass version with a 33.825″ scale. According to Longworth, early versions had a single DiMarzio “One” pickup and Grover Titan tuners, while later basses had a DiMarzio “G” pickup and Schaller pickups. Expect to find various combinations of those. Longworth also mentions the possibility that some might have Mighty Mite pickups, but this is uncertain. EB-18 production began in ’79 and about 5,226 (about 1,300 a year) were made until the guitar ended in early 1982.
I recently bought my first tube amp, the Marshall DSL40C, which has amazing sound for the money, but the reverb that came on it is virtually non-existent. So I started looking at reverb pedals.....who in their right mind would pay over $100 for an effects pedal that does one thing like a (Fender reverb or Hall of Fame or Holy Grail)? Then I cam across the Zoom Chorus/Delay/Reverb and almost bought it for $119 but then this popped up. With the nearly 5 star average review, I thought I would spend the extra $80 and try it out. WOW am I glad I did. Not only do I now have a great sounding reverb, but I have every other effect you can ever imagine (phaser, tremolo, chorus, delay, overdrive, distortion, filters, etc....the list goes on and on and on.

With 20 watts of rated power and an 8-inch speaker, the Champion 20’s sound output capability is a little above average for this class of amplifier. Those who like the features but need more power can check out the 40-watt version with a 12-inch speaker, the Champion 40, which costs twice as much but should be powerful enough for most jam sessions and gigs. The Champion 20 also includes a 3.5 mm line input for connecting a smartphone (good when you want to play along with recorded music or a music instruction app) and a 3.5 mm headphone output.
Reverb's Free Online Price Guide: This specialty vintage guitar site is one of the largest, most carefully maintained used vintage guitar and bass shops on the internet. It sells hundreds of used guitars and basses of all makes and models. It offers a free online Price Guide where you simply type in the model of instrument you have, and Reverb will analyze its vast database of transactions and give you a large result filled with prices. This gives you a real-time look at the market and where your particular kind of instrument fits in. It is a living, breathing blue book, and (the best part) it is free.
There are any number of different variations which can give a guitarist his or her tone. The combinations and possibilities are mind-blowing. You can take your pick from the type of guitar used, the hardware and technology used in the guitar, the amplifier you’re plugged into, the room in which you’re playing, the level of technique within your fingers. The list goes on. Typically any one of these factors could make the exact same rig sound completely different in the hands of another player. Yet technical mastery and high-end or vintage equipment are usually a by-product of having played the instrument for A Very Long Time. What about when you’re at the start of your playing career, and you’re looking for a quick shot in the tonal arm? Or you’re more accomplished and looking to experiment with different sounds and textures. It’s here that guitar effect pedals start becoming more and more attractive. But what are they?
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=155.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prod361014, MSRPRange=false, enablePDPColorOption=false, showBrandNameWithProduct=true, restockStartAmount=null, priceVisibility=1, listPrice=155.0, salePrice=155.0, isOnSale=false, showMSRP=true, restockCount=0}
Boogex is a guitar amplifier plug-in with a variety of sound shaping features.  With Boogex it is possible to get heavy distorted sound as well as slight distortion sound.  Boogex is also able to apply any speaker cabinet impulse response (selection of built-in impulses is available).  Processing latency is very modest - 96 samples (2.1 ms at 44.1kHz).  Boogex comes with several example factory presets.
Because bass amps have to reproduce lower frequencies than an electric guitar amp, and it takes more amplifier power to reproduce bass frequencies, a bass player will typically need three or four times the wattage of the electric guitarist.[16] For example, if an electric guitarist has a 100 watt amp, the bassist in the band should have a 300 to 400 watt bass amp. For electric guitar amps with 50 watts or less of power, a bass player may need an even higher multiple. While an electric guitarist will often find that a 50 watt amp will be adequate for rehearsals and mid-size performance venues, a bass player performing alongside this electric guitarist will typically need at least a 300 watt bass amp, six times the power of the electric guitar amp, to get a good bass volume. "More advanced players who regularly gig in small to medium sized venues...typically [use amps that] produce 300-700 watts of output."[17] Bass players using bass stacks in very large venues (e.g., stadiums, outdoor festivals) may use amp heads that put out 750 to 2000 watts of power. British rock bassist Mo Foster tours with a 1,500 watt bass rig.[18] Somewhat controversially, as there is no clear engineering support, many think that a tube bass amp will sound louder than a solid state bass amp of the same wattage.[19]

This how-to guide will cover the aforementioned effects, as well as fundamentals like the function of typical delay controls, and where to place your unit in an effects chain. Although there are countless delays on the market—many of which have mind-boggling features—we’re going to use a basic delay pedal setup similar to what you’ll find on a Boss DD-7 as our reference point. We’ve also provided some sample settings so you can get the most out of your delay pedal right away.
One app I can recommend for playing these SoundFonts on smartphones or tablets is bs-16i from bismark.  Large SoundFount files like Nice-Keys-* listed at the top of this page have been tested and run perfectly on newer iPads with 3gb of Ram or more. For iPads with 2gb (Air2) it is best to limit the SoundFont size to around 600mb. For older devices try SoundFonts around 300mb.
A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.
For example, if you plug into a .7V power amp and you get good sound – great! However, if you plug into a 1.25V power amp and find the signals are weak, it’s not the tonal lack of the power amp that’s the problem. The preamp signals are too weak to be driven to the powerful 1.25V power amp. The issue is the sensitivity input of the power amp is too high for the preamp to be driven well.
20 pages, black and white with color front cover. In the middle of 1981, Rosetti took over distribution of the Gibson line in the UK. Rosetti were a very big name in Britain, having distributed Epiphone since at least 1963, as well as Hagstrom and others. This catalogue was produced at the tail end of 1981, and introduces a number of models to the UK, such as the MV-II, MV-X guitars and the Victory basses, the GGC-700 and the Flying V bass. Some of these models were so short-lived that they were actually never included in US brochures. The cover image (reproduced in part here) showed some of the earliest demonstration models, including a Victory with a highly unusual white scratchplate.
{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[gc] shop: accessories: strings: guitar strings","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: strings","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"acoustic guitar strings","eVar18":"03e64461-af2b-4a48-8533-e7748b0554d2","prop5":"[gc] shop: accessories: strings: guitar strings","prop6":"[gc] shop: accessories: strings: guitar strings","prop3":"[gc] shop: accessories: strings: guitar strings","prop4":"[gc] shop: accessories: strings: guitar strings","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
Another name that is usually associated with PRS is Carlos Santana. He has a number of guitars that bear his name, and this one is probably the most popular one. It’s affordable, sounds great and plays like a dream. After mere hours playing it, I’ve realized just how expressive you can be with it. It impressed me enough to take a high place on my list of guitars that I have to get. Needless to say, it didn’t take me long to make one a part of my collection.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: martin","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
It obviously wasn’t ideal for guitarists to permanently damage their amplifiers for the benefit of experimental tone. Nor was it practical for them to drag immovably large objects on tours. Luckily, increasing experimentation in guitar sound modification collided with the widespread manufacture of electronic transistors in the early 1960s, which replaced vacuum tubes and integrated synthetic distortion in amplifiers. As the transistor revolutionized computing, it also dramatically simplified the production of guitar effects and amplifiers, allowing compact design and portability with little overheating.
Due to the acoustic, aesthetic and processing properties (workability, finishing, joints) the wood and the ligno-cellulose composites are the most valued materials for the musical instruments' construction. The guitar is made up of a complex structure, formed by a vertical wall in a curve shape (technologically named "sides") and two faces made up of ligno-cellulose plates, so that it should... [Show full abstract]
Although the electric bass was invented in the 1930s by Paul Tutmarc, his new instrument did not sell well. It was not until Leo Fender developed the Fender Precision electric bass in 1950 that this new instrument took off in the marketplace. Unlike the upright bass, a solid-body electric bass does not produce acoustic sound from a hollow body; while an upright bass player often benefits from using a bass amp, a bass amp is a necessity for an electric bass player.
And, well do a whole lot of other little wonky sound-altering tricks that an engineer on the guitar factory (or a brave dude with a drill and a soldering iron) can think of. I've actually seen some people attach effect pedals to guitar bodies to have access to the knobs while they play (namely Zvexx Fuzz Factory comes to mind). Of course, that can also make the guitar look super high-tech with all of the switches, LEDs and knobs - to a less experienced viewer.
What if you could get a wide variety of sounds from your acoustic guitar, including complex effects and virtual (MIDI) instruments, without having to use an external amp? That would certainly be a game-changer, as it could essentially turn your guitar into an all new instrument, and by adding to your available 'soundscapes' without needing to be tethered to a plug, it could also convert acoustic performances into rockin' ones.
With a history dating back to 1833, Martin acoustics rank as the most historic and iconic guitars ever made. From the small-bodied parlor guitars of the 19th-century to the landmark dreadnoughts of the 1930s and beyond, Martins have and continue to define the form and sound of the instrument. Take a look here for examples every type of vintage Martin acoustic including icons like the D-28, D-35, 000-18 and many more.
The MD400 has one Alnico V humbucker at the bridge and one Alnico V mini-humbucker at the neck. Both are ‘rail’-style pickups, which are quieter, and provide more consistent tone and sustain across the strings. Both pickups have been coil-split, too—so push or pull the master “Tone” knob to disable one coil of each humbucker, effectively turning them into single-coil pickups.
In 1952, Alfred Dronge – co-owner of small New York City music shop Sagman & Dronge – registered the Guild Guitar Company. The following year, they began producing deep hollow body guitars, a reflection of Dronge’s love for jazz music. The brand grew steadily through to the 70s – when Alfred Dronge died unexpectedly in a plane crash – getting their instruments in the hands of musicians such as Buddy Guy, Muddy Waters, and Bonnie Raitt. In the 80s, Guild began producing signature guitars for musicians Hank Williams Jr. and Brian May of Queen. The brand moved around frequently and it wasn’t until 2014 that they settled in their present headquarters in Oxnard, California – where all of their line of USA made guitars are now produced. To this day, they still produce a wide variety of hollow, semi-hollow, and solid body guitars that look as beautiful as they sound.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
MAKING A TEMPLATE Once you have traced out your design to the wood you can start routing. I recomend making a template first for the body rout out of 1/4" hard board or something equivalent to that. The professionals use cnc machines to carve and rout the bodies but smaller shops will use templates made from acrylic. The hard board works just fine, but might not last as long. You can also rout the body by hand and forget the template but if you mess up there's no going back so be carefull if you do.
Guitarists don’t have to just look on in envy as pianists lead the holiday sing-a-longs this Christmas. Our selection of holiday Guitar Tabs include traditional classics we all love like “O Holy Night” and “Carol of the Bells” and the pop favorites that just wouldn’t be the same without a guitar, like “Jingle Bell Rock” and “Happy Xmas (War is Over)” by John Lennon. But if you just can’t get enough of those traditional Christmas classics, you can pick up our collection of ’Christmas Favorites for Guitar.’
For my tastes, position 1 on a clean tone can be a bit too boomy. Even if one backs the volume a bit to take the edge off, it doesn't quite suit acoustic-style strumming. Position 2 is perfect for these sorts of things, though. I'd always use it for the small high chords you often find in funk and reggae. Position 2 is also a nice way thinning a distorted tone without it cleaning up too much, like Position 1 with the volume dialled down does. If you have your rig set so Position 1 screams, Position 2 will sing.
Fuzz was originally intended to recreate the classic 1960's tone of an overdriven tube amp combined with torn speaker cones. Oldschool guitar players (like Link Wray) (citation needed) would use a screwdriver to poke several holes through the paperboard part of the guitar amp speaker to achieve a similar sound. Since the original designs, more extreme fuzz pedals have been designed and produced, incorporating octave-up effects, oscillation, gating, and greater amounts of distortion.
Of this list I think it's such a shame to see some names there and others missed but it's only a list to grab attention, not a definitive, set in stone, tablet for future generations to adhere by. But seriously where is Brian May? The man that made me want to play in the beginning. Every time I hear him hit those strings it sounds like the first time. And no Danny Gatton either. But hey that opinions for you.
My first electric was a Decca, and a friend had one too. Mine was the one pickup style and his had two pickups. This was back in 1972. These were cheap but played very well and I wish I still had mine. There's one on Ebay right now that's just like the one I had, only ten bucks so far. I remember the great sustain and feedback I could get through it playing Hendrix songs!
But it might be the ESP LTD Series that has really vaulted this company into contention as one of the top brands, and certainly one of the best for heavy metal. These are more affordable version of USA-made ESP guitars, along with some innovative designs. The EC-1000 in particular has earned a strong reputation as more wallet-friendly alternative to the Gibson Les Paul.

Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.

Of course, any item is only worth what a willing buyer will pay to a willing seller. iGuide?is "just a guide." Please be aware that PRICES VARY WIDELY from region to region. Current estimated values are the result of much research. And we invite anyone to help add and update data. Read the "What's A Wiki" section below for more info on how to help.
John Mayer and Frusciante are very talented guitarists, but to include them at the expense of legends like Clapton, Duane Allman, Neil Young, The Edge, Brian May, George Harrison…that's unforgivable. I'll admit that Jack White needs more time to prove himself too, but of all the recent guitarists listed, he is the one with the most vision and confidence in his ideas. He is his generation's Jimmy Page.
Kent made a lot of "student model" instruments in the 1960's. I have always found most of the guitars to be quite playable but overall, the general guitar public in my area seemed to have a low opinion of them. I recently bought a solid body one pick-up, with case, that I practise on a lot. In fact, at a recording session I was using my Gibson Lespaul and the producer was complaining about the sound of it, so the next day I brought in my Kent and he loved it, it's on two songs on the CD we were working on!
Great guitar at this price point. Want to make it better? For so little money you can add lighter strings, a bone saddle, bone nut and pins. It's not necessary but they may help some. A bunch of small improvements put together make a big difference. What really does make a difference is having the action set up properly. Lowering it made it much easier to play for me. The finish and craftsmanship on this guitar is excellent.
Everybody doubles their rhythm parts, but I always thought, 'Why don't they double their lead solos, too?'. It's really hard to do, especially with any bends and faster sections, and it does take a very long time, but I've been doing it a different way to make things a little easier. For instance, as soon as I've just finished a song, I'll double the lead part right away, while it's still completely fresh in my mind.
2.  Cracked peg head.  Customer “fixed” with mystery glue and a wood screw.  Result:  Peg head and neck shaft not aligned. Fix: If the peg head can be re-broken you may be able to re-align the neck and re-glue (if it was glued with aliphatic glue you won’t be able to as the glue will not stick to itself).  The joint may have to be resurfaced and new wood may have to be inserted, possibly a spline as well.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Custom - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Diecast, Gold, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red

This is because sound in an acoustic is dependent upon the bridge, saddle, and soundboard’s (top) ability to transfer string vibration through the sound hole of the body. The top (soundboard), back, and sides makes the body of the guitar where the sound hole is designed and cut. Knowing this, you’ll not only need wood that’s strong, but wood that can offer unique acoustic properties that emphasize its ability to project differing sounds at various frequencies. Of course, your choice of strings also lends to the harmonic ranges of a guitar.
000-15: Base model of the upper end Martin Guitar line. All mahogany orsapele construction. ‘A Frame’ “X” top bracing, 14 frets clear, Optional model 000-15S 12 frets clear. All -16 and -16 series 000 instruments have long scales (25.4″) and 1-11/16″ nut widths, in contrast to the -18, -28, and -45 series, which have the ‘traditional’ 24.9″ 000 scale, retaining the 1-11/16″ nut width.
Choose from electric guitars with hardwood, polyester, or leather bodies, and carbon, maple, or rosewood fretboards. We offer right-handed and left-handed configurations, along with electric guitars that feature options like Tune-O-Matic, tremolo, and adjustable bridges. If you're brand-new to playing, you can even find a student kit including lesson books and helpful accessories to keep you on beat and in tune as you teach yourself to strum.
SJ Series: The SJ is Collings’ version of what is commonly called a small Jumbo. Although the 16 inch lower bout is slightly wider than a dreadnought, and the sides almost as deep, the tight curve at the waist creates in a very different sound chamber. SJs, especially examples in maple, typically have a more pronounced midrange response when compared to a dreadnought.
Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!
Parallel coils: coil tap connection needs to be broken for this kind of wiring, so three lead pickups cannot be wired this way. The idea is to join start of each coil with finish of the other coil. One on those connections will be hot, the other ground. Parallel coils will sound more like a single coil sound, noticeably quieter and shallower than a series connection.
In addition to guitars, Gibson offers consumer electronics through its subsidiaries Gibson Innovations (Philips brand), TEAC Corporation (TEAC and Esoteric brands), Onkyo Corporation (Onkyo and Pioneer brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems, pianos from their wholly owned subsidiary Baldwin Piano, and music software from Cakewalk. (See section #Instruments)
The primary means of identifying the model number of Kent guitars is via a label on the back of the headstock. Through the years many of those labels have fallen off or been peeled off. They do not add anything to the appearance of the guitar. The 700 and 800 guitars had a round foil sticker with the model number and sometimes serial number pressed into it, kind of like Dymo tape labels. The look a lot nicer than the white paper one used on earlier models, but they still can fall off over the years, and they are harder to read.
{ "thumbImageID": "Stiletto-Extreme-4-Bass-Black-Cherry/528006000127000", "defaultDisplayName": "Schecter Guitar Research Stiletto Extreme-4 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51274115040562", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "639.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Stiletto-Extreme-4-Bass-Black-Cherry-1274115040562.gc", "skuImageId": "Stiletto-Extreme-4-Bass-Black-Cherry/528006000127000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "See-Thru Black", "sku": "sku:site51274115040814", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "639.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Stiletto-Extreme-4-Bass-See-Thru-Black-1274115040814.gc", "skuImageId": "Stiletto-Extreme-4-Bass-See-Thru-Black/528006000011000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
A tremolo pedal takes your signal and chops it up, making it sound like the volume is dropping and reappearing very quickly. Imagine what it would sound like whilst holding a note and turning the volume down on your amp and back up again and you’ll get the idea. A tremolo allows you to change the speed at which the volume drops happen and how severe the cut off is. You can have it set to completely cut your sound out or just gate it, which allows a certain amount of sound through at each interval. The BOSS TR2 Tremolo is one of our favourites here at PMT.
Launch price: $999 / £899 | Type: Amp modeller/multi-effects pedal | Amp models: 33 | Effects: 42 | Connections: Standard guitar input, minijack stereo aux input, standard main outputs (L/Mono, R), XLR main outputs (L/Mono, R), standard stereo phones output, standard Send (L/Mono, R), standard Return (L/Mono, R), MIDI in, MIDI out/thru, USB, expression pedal | Power requirements: Mains power (IEC lead)

The three Teisco amps included the Teisco-88, the AMP-71R and the Miny. No details are available on these, but they were fairly rectangular cabinets with top-mounted controls. The Teisco-88 had “Teisco” and a big “88” on the grillcloth. The ’66 model was a tube amp, so this likely was, as well. I suspect the others shown were tubers as well. The Miny had the italicized T logo on the front. The AMP-71R had reverb.
For example, Pat Metheny took his Gibson ES-175 and ran it through some lush chorus, delays, and compression to create his signature jazz sound. On the flipside, John McLaughlin plugged his guitar into a Marshall stack for the wild rock tones heard on records with Tony Williams Lifetime and Miles Davis. In fact, Joe Perry of Aerosmith plays a Gretsch Falcon. The hardest thing to do when playing a hollow body guitar through a loud amp, or a hollow body with a dollop of distortion, is not to get bowled over with feedback. Either way, these guitars are celebrated for their big, full sounds, and can be applied to many musical situations.

Do you know what does custom shop means? Like custom shop cars and motorcycle, furniture. With Top Guitars it pertains to woodworking, most of us would define a custom shop as one dealing with made-to-order goods with certain specifications. Someone comes into my realm with a certain vision. That vision may be on a set of architectural prints or still locked in their brain waiting for extraction. In either case, it’s a vision or plan that they have, not me.
Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too. 

The late ’36 Supro Amplifier was a spiffed-up version of the amp seen in the ’36 Bronson catalog, with a leatherette-type covering, leather handle, and enclosed, removable back. It now had an 8″ speaker, which spoke through a round grill with four bolts visible from the front. It’s impossible for me to tell from the illustration available to me, but this may still have had the resonator plate grill. The amp had four tubes and a “…special high fidelity circuit” that was “…rich in tone quality, and superfluous [sic!] in power.”
Open Monday-Friday from 8 a.m. to 4:30 p.m., the Visitor Center showcases a diverse selection of Taylor guitars, including standard models and seasonal limited edition offerings, for players to enjoy. To enhance the playing experience, two sound rooms are equipped with amplifiers, enabling players to plug in and play in a private environment. The Visitor Center also houses the Taylor Guitars store, where guests can purchase items including guitar parts and accessories, along with Taylor-branded clothing and other items from the company’s TaylorWare line.
Nearly all Martin instruments come in different styles. The higher the style number, the more fancy (and collectible) the instrument. Again starting in October 1930, Martin stamped all flat top guitars with the style number, directly after the body size (and above the serial number). Style numbers can range from 15 to 45. A letter can follow the style number too, giving some additional info about the instrument. For example, a "T" after the style number indicates a Tenor guitar. See the general specs section for a full list of these suffixes.
Jim Root: Featuring mahogany body, maple Modern C shaped neck, ebony fretboard in Flat Black finish, maple in Flat White, 22 Jumbo frets, EMG pickups, EMG 81 in bridge position, EMG 60 in neck position, strings-through-body hardtail bridge, locking tuners, 3-way switch, single volume knob and large headstock.[18] Along with his Jim Root Telecaster, it is the only Fender guitar equipped with EMG pickups as standard.
The top of the archtop line featured two very nifty new models called the Vegas 40 and Vegas 66. The Vegas 40 (Teisco Del Rey EP-11T) double-cutaway thinline was promoted both in Japan and the U.S. It was a full size ES-335-style with two pickups (the large rectangular type with chrome sides and black insert, square poles), bound f-holes, volume and tone controls on the lower bout (no plastic plate) and a fancy new angular archtop Bigsby and roller bridge. The pickup selector was a rotary switch on the lower horn with a new round knob with a lever (versus the old chicken beak). The bolt-on neck had a new three-and-three head with a flared “check mark” indentation in the top, with wide wings on either side, a shape that would characterize a number of other models later in the decade. The fingerboard was bound, with dots. On the Japanese version, the headstock carried a zippy new typeface proclaiming “Vegas 40,” while the pickguard used a similar angular script for the Teisco logo. The Teisco Del Rey carried its regular sticker.

One of the first successful methods was to record a track as you would any other. Then you would take the recording and play it through a speaker that is placed in a very large room. The magic happens when you put a microphone somewhere in that room to essentially record the sound of a recording. However, by placing that speaker in a large room, they have added a layer of natural reverb.

Wah – a frequency-based effect that creates a sound similar to a voice saying “Wah”. A Wah pedal uses a filter that sweeps across the frequency band. In a pedal wah, pressing the toe down will make the guitar signal brighter; heel down makes the signal darker. The filter can be controlled either automatically by electronics within the pedal or manually by the use of an expression pedal giving the guitarist’s hands-free control over their tone.

{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: amplifiers and effects: amplifiers","prop1":"[mf] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"guitar amplifiers","prop5":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop6":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop3":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category2"}
We’ll round this list off with a slightly different proposition, particularly with jazz in mind. The Fender Classic Series ’72 Telecaster Thinline is a semi-hollow guitar in the guise of a traditional solid body. It features the same body shape and size of a standard Telecaster but has its horizon’s broadened thanks to the internal routing of the wood and attractive ‘f’ hole on the guitar’s top. Two humbuckers – again, not traditional on a Tele – provide exceptional warmth and versatility. Combined with its high levels of construction and craftsmanship this a guitar which will last a lifetime.
The ‘HSS’ refers to the pickup combination, with a humbucker and two single-coils, which is a versatile arrangement for both clean and distorted playing, especially when coupled with two tone controls and a five-way pickup selector switch. An excellent price for a good brand, and perfect for newbies. Make sure to check out the full review of this guitar.
Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.
There are over 200 choices of electric guitar strings, combining Ernie Ball's diverse selection of materials, string gauges, and styles. Ernie Ball electric guitar strings come in a variety of different high quality materials including M-steel, cobalt, nickel, stainless steel, titanium, and bronze. Our guitar string sets are available for 6-string, 7-string, 8-string, 9-string, 10-string, and 12-string guitars.
The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").

The first time you plug this Les Paul into an amp, the sound that comes out will put a smile on your face. It’s that vintage growl of a legit PAF that you can’t really recreate completely with anything else. We pushed a Plexi into overdrive and rolled off the volume a bit for that true rock tone. We weren’t disappointed. Gibson Les Paul Standard Heritage Cherry Sunburst brings that same epic tone which the whole series is known for.
1975 Gibson Les Paul "Goldtop", Deluxe to Standard conversion, Electric Guitar. This is from my personal collection. I have another and mostly play my Strat and Tele for the music I'm doing now, so it's time to thin the herd (be aware that I might change my mind about selling it). Great, original Gold Top finish with nice checking. I was actually trying find one with a lot of "green" wear on the top of the body, but this one still has some good character (I hate shiny guitars). Plenty of wear to the finish on the back (see photos). Other than a pickup change and strap button change, the guitar is as I bought it used. When I purchased it there was a set of THC, PAF'S installed (don't ask, they're gone). Personally, I didn't care for them for a few reasons, so I replaced the front with a new, Gibson 490R, AlNiCo II and a Seymour Duncan, Seth Lover in the bridge.  Pots have been replaced and the selector switch appears to be original. It already had the Deluxe to Standard conversion work done (no the truss rod cover is not the original, as it should say deluxe). I believe the bridge and tailpiece are newer units as they shine too much for the rest of the guitar. The jack plate has been changed from plastic to metal. I installed the Schaller strap lock buttons. The tuning machines have been changed to sealed Grovers. The headstock has been re-fin'd in the back, from an what looks to be repairs around the tuners. In doing so, the serial was made very faint, and only somewhat readable. Appears to be "92?128". Has the 70's volute for added headstock strength. Bound, Rosewood fingerboard. Mahogany neck. Plays and sounds great. Original frets have normal amount of wear with plenty of years left in them. Neck and action is adjusted perfectly (for me anyway) and I did guitar set-ups for 12 years at a Fender / Gibson / Martin / Yamaha / etc dealership at $45-$150 a pop. I have sold guitars for many years and have been to "vintage" shows, so I'm fairly versed in guitar speak. This is not a "minty" show piece. If that's what you're looking for, then buy another guitar. This is a player's guitar. The guitar has not had the headstock broken off however like many used Gibsons. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body) and cleaning and polishing. STAYS IN TUNE!!! I play it though all three of my amps, a Trace Elliot "Super Tramp", Marshall JCM-800 and a '67 Fender Super Reverb (original). Plays and sounds great for about any type of music, except the currently installed pickups are probably too hot for jazz. We also installed a new set of .010 strings. The cream colored pick guard and chrome bracket is in the case pocket, I just removed it as I don't play with them installed on any of my Pauls. It's in fine shape if you wish to install it. Guitar weighs in at 10.5 lbs, assuming our UPS scale is reasonably correct. Original Gibson, Les Paul case with the purple lining included (the lockable latch is locked "open" and we do not have a key. Case still stays closed with the other latches. It was that way when I bought it years back).
Reverend guitars are known to sport many premium appointments despite their modest price tags. And the Jetstream HB is no exception. It has a comfortable roasted maple neck, a Wilkinson WVS50 IIK tremolo, pin-lock tuners and high-end electronic components. A korina body and a 12-inch-radius roasted maple/blackwood fretboard (depending on the finish) complete the other notable specs on this guitar.
Had gibsons, fenders, etc. Was really impressed with my washburn idol. Only downside is that there aren't many dealers, so you've really got to make an effort to get one in your hands. Dollar for dollar, one of the best brands out there. Quality can be spotty if you look on ebay, so I'd recommend craigslist... Buy em used, since they don't hold value like the big brands.

Kaman and his technicians began by building traditional square-backed guitars, but by the sixth prototype were using oscilloscopes to develop the now familiar bowl-backed shape, its spherical shape being self-reinforcing, thus eliminating the need for bracing. After some experimentation, the carved, round-crowned Ovation three-and-three headstock was developed. The modern Ovation guitar with a Lyracord back was born.

ACT TRMOLO REPLACING THE STRINGS ACT tremolo allow two styles of string installation. 1) The strings are installed by putting the ball end into the string slot and hooking the ball end below the string catch at the rear of the tremolo unit. 2) The strings are installed by putting the ball end into the string slot and hooking the ball end in the string catch at the bottom of the tremolo unit.
When you’re starting to become serious about playing the guitar, the question of “what amp should I get” is bound to pop up. There’s quite a deal of variety out there, with many brands and models, and constant innovation adding new features to choose between with each passing year. It’s enough to baffle even an intermediate player, let alone a rookie who’s just getting started. To ensure that you get the right amplifier for your needs, you’ll first need to know a bit about how the amp’s specifications translate to real life.

Originally, the Californian brand created by Randall Smith in 1969 used to offer Fender mods, just like Marshall, to give the amps more gain or, in other words, more distortion. And they managed to seduce Carlos Santana and Keith Richards. The Mark series was the brand's flagship until the introduction of the Rectifier series whose name refers to their current rectifying technology (a rectifier converts AC to DC). Mesa Boogie is certainly the best-known brand after Fender and Marshall. It is still the reference among metal musicians, especially thanks to bands like Metallica and Dream Theater who tend to use Mesa products on stage and in the studio. More recently, Mesa Boogie introduced the Atlantic series that includes the TransAtlantic TA-15 and TA-30. These two amps reflect the manufacturer's interest in the "lunchbox" market.
The best way to get this sound out of an Octavia is by using the neck pickup on the guitar and by experimenting with the tone knob to get a more pronounced octave effect. Some other famous Hendrix tunes using the Octavia are “Who Knows” and “Machine Gun” from Band of Gypsies. If you want to put together a Jimi Hendrix pedal board, the Octavia is a must. There are many great reissues of this pedal on the market, but if you get a chance, like fuzzes, try a few of them next to each other. Even a few of the same pedal, as they often sound very different. One may have more of an octave effect, or be warmer sounding etc. This is due to the use of the transistors that can often have slightly different values that can make big tonal changes.
Many experiments at electrically amplifying the vibrations of a string instrument were made dating back to the early part of the 20th century. Patents from the 1910s show telephone transmitters were adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge; however, these detected vibration from the bridge on top of the instrument, resulting in a weak signal.[2] With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.