All I can say is quit wasting $ on new. A new guitar is like a new car it’s gonna lose 20% of its value once you take it out the first time. Unless you are buying a Gibson or fender custom shop etc Just go for what plays and sounds great. Perfect example is the Esp ltd ec401vf or 400. Used $300-400 has stock seymour duncan 59 neck jb bridge or the newer 401 has the dimarzio’s in it. Grovers tuners earvana nut mahogany body. Just an excellent setup for half the price of an epi les paul. Don’t get me wrong I have an Epi les paul traditional pro and it’s a nice guitar but for $750 nah. Since I picked up the 401 I hardly play my jag mustang or either of my epi l.p. or sg. Its just that nice of a guitar. If you are in the market for a les paul style or a new guitar in general take a look at the 400 series it’s a whole lot of guitar for the $

Harmony's market share of entry and intermediate-level instruments was it's downfall in the mid-1970s, as it found itself unable to compete with the competition from overseas (particularly Japanese) manufacturers. The higher-end American companies like Guild, Gibson and Fender struggled to some extent too, but the imports were generally aimed at student guitarists rather than professionals.

{ "thumbImageID": "FG830-Dreadnought-Acoustic-Guitar-Tobacco-Sunburst/J33498000003000", "defaultDisplayName": "Yamaha FG830 Dreadnought Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Autumn Burst", "sku": "sku:site51500000007792", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "495.00", "priceVisibility": "1", "skuUrl": "/Yamaha/FG830-Dreadnought-Acoustic-Guitar-Autumn-Burst-1500000007792.gc", "skuImageId": "FG830-Dreadnought-Acoustic-Guitar-Autumn-Burst/J33498000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tobacco Sunburst", "sku": "sku:site51500000007791", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "495.00", "priceVisibility": "1", "skuUrl": "/Yamaha/FG830-Dreadnought-Acoustic-Guitar-Tobacco-Sunburst-1500000007791.gc", "skuImageId": "FG830-Dreadnought-Acoustic-Guitar-Tobacco-Sunburst/J33498000003000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000007788", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "495.00", "priceVisibility": "1", "skuUrl": "/Yamaha/FG830-Dreadnought-Acoustic-Guitar-Natural-1500000007788.gc", "skuImageId": "FG830-Dreadnought-Acoustic-Guitar-Natural/J33498000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Me got a Dorado resonator guitar, very nice dark walnut finish with white binding on edges. I bought it in 1985 but assume the guitar is mid-70's. Incidentally the neck has a very "japanese" feel to it. I was told by a guitar dealer that these particular instruments may have been ( at least partially) manufactured in Japan, then possibly had their resonators fitted in USA. They were DISTRIBUTED by Gretsch, in Europe at any rate. Mine is a nice guitar but not nearly as loud as most resonators.

This book teaches you how to visualize the notes, which will lead quickly to remembering them. Once you know where the notes are, forming chords becomes easier, which leads to fluid playing in any position. At the very least, if you can identify your root notes, you can bail yourself out of trouble at any time. That skill for resolution serves you in improvisation and the random jams that will provide much of your growth.
Cool! Yes, this idea is definitely stolen from G&L!It would be cool to see a picture or schematic, but it’s probably going to be really close to this, if not identical. Meanwhile: Don’t be scared to open up your guitar — they’re build for it! Just be gentle till you learn what you’re doing. I always stand by the Maker’s Faire credo: If you don’t open it, you don’t own it. 🙂
This technique is only possible with 4-conductor pickups or pickups that already have coil-tap lead instead of all four leads. Coil tap is a connection between two coils in a humbucker and is sometimes referred to as “series link”. Vintage style pickups have their coil tap enclosed in the pickup which means that we can’t play with it. Having coil tap gives us a couple of wiring options:
Awesome for the money! I have had my guitar for about a month now. The guitar itself is worth the money. I play on a 100w amp at church and it sounds good. Definitely not the highest quality but still a good full body sound. (After restringing it. The strings it comes with are garbage) The amp that this comes with is nice ... I actually was using it as a practice amp with my bass and it did fine. Nothing that I could play with any other instruments but definitely can hear what I'm doing. My son also uses it as a practice amp on an electric guitar and it does fine, it doesn't have any functions just meant to be an accustic amp. Definitely worth the money.
I purchased this about 8 months ago (it is my first acoustic guitar) so I could learn to play again, I'm a singer by trait, but wanted to pick up a guitar again after a very long break. I did not want to spend a lot of money, but I didn't want junk either, while at the same time I wanted something that would translate well into performing live too. I did my research, and personally, it came down to this or the Yamaha APX-500 (But I really want the Mrk 1 not 2), so I settled for this.
The Canadian firm Godwin is another popular name for producing best quality electric and acoustic guitars. (Have you heard of Seagull acoustic guitars? It’s the same brand.) Godwin outshines among the world of guitars due to producing high-end instruments with surprising variations. They even manage to touch bass too. Not only the Godwin guitars depict quality, but also reflect classiness.

While they may be on the dry side, these books are convenient because they’re always available for reference. In an online class or an app, you might have to go digging through files or lessons to find that one scrap of information that was helpful. You also have to be on your phone or at your computer. For some people, the old way is still the best way.
By 1961, at least, the makeover was complete. The old mini Les Paul, the J-1, was changed to become a sunburst double-cutaway solidbody. These had widely flaring equal cutaways, a single rectangular neck pickup, a large pickguard which covered most of the treble side, a wooden adjustable bridge, covered tailpiece, volume and tone. The bolt-on neck now had a more Gibson-style open-book head shape (with round logo sticker). The fingerboard had the old large dots with two small octave markers. The J-1, in a number of forms, would survive at least through 1966, if not longer. It is presumed that the J-2 was still around and that it had also become a double-cutaway; it most certainly was still in the catalog, as a double-cut, in ’62.
Set-ups include diagnostics, redressing and buffing frets, cleaning fret board, tightening hardware, restring, adjusting nut slots, truss rod adjustment, balancing tremolo, adjusting action, setting intonation, checking electronics, adjusting pick ups, detail and cleaning. Electro/acoustics get balance of output, and archtops have bridge located and taped.

I've owned and played Martin, Ovations, Fender, and Gretsch acoustics but none has thrilled me more than the Breedlove Concert Pursuit with cedar top. The tone is definitely different - so balanced and the midrange really shines. Absolute joy to play despite this is not their top line. Not so much a strumming guitar - shines when finger picked. Last but not least, the tone when plugged in is so deep and warm it astounded me. Far better than the others I've had.
Orville Gibson founded the company in Michigan and stayed a family business until the early 50's. Ted Mcarty ran the company from 1951 or so, and is the "father" of most successful Gibson electric guitars, the Les Paul, the SG, Explorer, Flying V, ES-335 and so on.. In the late 60's Gibson was bought by the Norlin Corp, who mainly were known for making refrigerators. Most feel Gibson adopted a quanity over quality approach to guitar making during this period and 1970's to 1980's Gibson electrics are considered less desireable by most guitar collectors, and considered outright junk by many others.. Cosmetic changes to Gibson models during that period apparently reflect the poor taste of the buying public during that era... and while a 1974 Gibson SG may look ugly compared to the classic 1961 or 1968 models, please remember this was the era of ployester liesure suits and Chrysler Cordobas.. In 1986 Gibson was bought by a group who understood guitar making, and is a privately held company to this day. Gibson quality has appeared to improve steadily from 1987 to present day, but it seems to be unanimous that todays models do not approach the craftsmanship of the late 1950's when Gibson apparently peaked.
Actually, company founder Leo Fender's first business was repairing tube circuitry equipment including radios, phonograph players, and home music amplifiers. He noticed the growing popularity of amplifiers for home music systems and branched out into selling music records and renting out PA systems he had designed from his repair shop. Then he got even more involved in music by making and selling Hawaiian lap steel guitars containing a proprietary pickup system which he bundled with his own newly designed amplifiers in 1945. The following year he changed the company name from Fender’s Repair Service to Fender Electric Instruments Company.

The ghost Hexpander MIDI interface system adds MIDI capability to almost any guitar or bass.  Plug your guitar into pitch-to-MIDI converters by Roland or Axon and enter the MIDI sound universe.  The Hexpander MIDI interface provides responsive and accurate tracking unequaled be any other system on the market today.  Check out how affordable and easy it can be to make MIDI part of your music making.

While it can be a troubling task to find the perfect electric guitar to bring out your inner rock star, we hope that our electric guitar reviews & our comprehensive guide has helped you narrow down your choices. Our best piece of advice is to determine the type of genre you’re interested in playing. That will be a good basepoint for you to work from in order to determine the best electric guitar that fits your needs. Afterward, it is important to select the guitar that has the best components to give you the highest quality of sound. The color does not matter too much but the next most important factor to think about is certainly the wood type used to build the electric guitar. Picking the right type of wood is going to more or less, create better or worse sound.
Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.

The placement of pickups on the guitar's body has a significant influence on the tone they generate. Pickups located near the bridge sample the strings where they have the least overall motion. The result is accentuated treble sounds or "bite." Pickups located nearer the center of the strings—closer to the neck of the guitar—produce a tone characterized by more midrange and bass sounds.

It doesn't even seem to matter which kind of Guitar amp you have or when plugged into any PA system. This guitar is a keeper. it comes with Godin Nickel Strings which is why unplugged it may sound too tinny to some ears, but after changing to Elixer Acoustic Strings, it sounds much better unplugged and really shows off plugged in. It now can give my Acoustic six strings a real run for my attention. At gigs and open mics, people come up and ask,,,what the Heck is this Bruce? Looks and sounds amazing. My only wish is that it had the same Pick-up system as on my A6 Ultra, two separate Pick Ups and Controls and two 1/4 in outputs.

Make sure it feels comfortable, especially the fretboard and body. Make sure there are no buzzing notes and that the frets are flat and even. Avoid electric guitars with whammy bars as they may be too difficult to tune for beginner guitar players and make the guitar more expensive (maybe one on the next electric guitar you buy). The tuning heads should be easy to tune and stay in place, and try playing the guitar through an amplifier to check for a good sound quality (hopefully no humming or buzzing).
There are, by the way, a number of discrepancies between Japanese Teisco and American Teisco Del Rey literature from 1966. Many of the older models continued to be promoted in Japan, but not in the U.S. Virtually all guitars in U.S. literature are also seen in Japanese catalogs. This does not mean that just because W.M.I. did not promote certain models, they were not still available in America. Many may have gone to Sears as Silvertones, and it’s possible that W.M.I. still brought in guitars other than those in its catalog.
I personally could not play any of my songs as they currently stand on Amber and that influences my review a lot.  And while I like pushing away from open chords, power chords, and standard major/minor barre chords, I think a strumming/chord focused VSTs should be able to play a Cadd9/A with a capo on the second fret. That’s not even a complex or difficult chord to play (Guitar tab = 5x055).
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Mahogany - Nut Width: 42mm - Fingerboard: Rosewood - Frets: 24, Jumbo - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Earvana - Bridge Construction: Rosewood - Hardware: Chrome, Grover Tuners - Circuit Type: Active - String Instrument Finish: Brown Sunburst

Guitar chords are usually represented by the name of the root note, and the scale it is based on, such as A Major, written as simply A. An A chord built on a minor scale is called A Minor, and written as Am. An A chord built with a 7th is called A7, and so on... Diagrams are used to show how the chord is actually to be played on the guitar, with finger positions mapped out. For a complete overview about chord structure, check this guitar chords formula chart.

Named using Jim Marshall’s initials and numbers from his car's license plate, the Marshall JCM800 debuted in 1981. With the newly introduced Master Volume feature, the JCM800 allowed for crunchy, sizzling distortion at low output levels, making it the amplifier of choice for heaps of hard rock and metal players, including Slayer’s Kerry King and Jeff Hanneman and Slash of Guns N’ Roses. The JCM800’s popularity carried on beyond the Eighties, becoming a favorite of Fugazi’s Ian Mackaye and Tom Morello of Rage Against the Machine.

Guitar Tricks has a special Discount Coupon Code that will make it even cheaper for the first month. You can get 60% discount if you choose the monthly subscription. To take advantage of this offer follow the link below and key in your email address. You should wait for an email with your username and password for Guitar Tricks. Use this information to logon.  Once you are inside Guitar Tricks select the Upgrade button and choose the Monthly Membership option. In the Coupon Code section on the same page enter the Coupon Code ‘60OFF’ to get the 60% discount on your full access membership for the first month.

The author is an excellent writer and explains everything slowly but doesn't treat you like an idiot. He starts from the very beginning with teaching string names, notation etc but you can start anywhere in the book according to your knowledge and experience. Each exercise/song teaches a new concept and there is a very good sound quality CD that is enjoyable to play along with and hear what the proper timing should be.
This Duo-Jet has the typical brown back and neck finish, original tuners, bone nut (which has never been off), ebony fingerboard and original frets, lefty thumbprint inlays, original Pat. Applied For Filter’Tron pickups with original wire harness including switches and capacitors. All solder joints are original. Original bar bridge. The lefty Bigsby tailpiece does not appear to be original to the instrument, and is probably a late 60s Bigsby, as there are screw-holes from another tail-piece on the bottom. The second to most recent owner acquired the guitar with its current tailpiece in 1971, and the only change he made to the Bigsby was in removing the black paint. The guitar was recently sent to Curt Wilson at Old School Guitar Repair( at the recommendation of Gretsch guru, Edward Ball, where the front of the headstock was refinished to the correct black(previously Orange) and the center portion of the Bigsby was repainted black. Sadly, the previous owner removed and discarded the original lefty pickguard many years ago.
If your audio track suffers from a lot of spill, or includes chords, the pitch correction may not work correctly. Where spill is loud enough to be audible, you'll hear this being modulated in pitch alongside the wanted part of the audio as it is corrected. As a rule, chords are ignored, so guitar solos, bowed stringed instruments and bass parts (including fretless) can be processed, and only single notes will be corrected.

“I like it because it’s light and simple,” Alana said, reflecting on its 5.1-pound weight. “It’s easier to get my hand around the neck on this one,” Charles noted. Both found the Les Paul Express’s rounded top shoulder to be more comfortable than the horn-shaped cutaways on most of the other short-scale models, and they felt the smooth finish on the back of the neck made it easier to play. The adults agreed. “I’m surprised—for a small guitar, it’s fun to play,” Ken Rosser said.
The Hal Leonard Bagpipe Method is designed for anyone just learning to play the Great Highland bagpipes. This comprehensive and easy-to-use beginner's guide serves as an introduction to the bagpipe chanter. The accompanying DVD includes video lessons with demonstrations of all the examples in the book! Lessons include: the practice chanter, the Great Highland Bagpipe scale, bagpipe notation, proper technique, grace-noting, embellishments, playing and practice tips, traditional tunes, buying a bagpipe, and much more!.

I personally use Vegas, Sonar, and REAPER. I would not recommend Vegas or Sonar for live playing, if for no other reason than both have crashed on me during recording sessions, and I do not easily forgive that. REAPER (Audio Production Without Limits) never, ever crashes. It’s not as full featured as some DAWs, but what it does, it does well. I use it for all my recording.
On the same topic, if you do apply some compression during recording, be careful not to overdo it. At this stage, you don’t need to hear any effect, it should just transparently control peaks. If you apply the amount of squeeze that may be needed for the mix as the part is going down, it might cramp the player’s style—better to leave that for later. Plus, if the signal is over-compressed here, it may bring out the normal squeaks and finger & fret noises so much that it becomes difficult to eliminate them later—this is especially true if the player is really a guitarist who also moonlights on bass. Guitarists who try their hand at bass parts often haven’t mastered an experienced bassist’s technique for damping the strings, and the little playing noises I referred to, as well as distracting undamped harmonics, can end up overpowering the recording if heavy limiting/compression brings them up (I recently struggled mightily to deal with a bass track that suffered from this flaw).
Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you’re looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.
But if you never play with a tone as dark as the fully-rolled off sound, you might consider a lower-value cap. The next example is an .033μ (also know as 33n and 333), another popular choice, followed by the smaller .022μ (also know as 22n and 223), and the even smaller .01μ (also know as 10n and 103). As the cap gets smaller, the minimum tone knob settings gets less dark. As the overall range of the tone pot decreases, it may be easier to locate any desired “nooks and crannies” between the highest and lowest settings.
With two decades of experience and thousands of local customers served I found myself unemployed/downsized in 2010 asking myself what I wanted to do next. After some searching I understood that I really enjoy the interaction that takes place in the local store between the customer and the shopkeeper. I know that we can offer the same prices as the big stores and hopefully make the experience more enjoyable.
A friend lent me this banjo and I got it working and sampled it. Its a 5 string closed back banjo. The fifth string being tuned to a high "g" note (half the length of the neck). Its this string and the closed back that helps give you the bluegrass sound (the high string ringing the "g" note throughout each of the chords with syncopated fingerpicking patterns). This has a standard mapping with variations of long release (to hear the whole sample) and reverb.
Use of a slide or bottleneck. The term slide refers to the motion of the slide against the strings, while bottleneck refers to the material originally used for such slides: the necks of glass bottles. Instead of altering the pitch of a string in the normal manner (by pressing the string against a fret), a slide is placed upon the string to vary its vibrating length and thus its pitch. The slide can be moved along the string without lifting, creating continuous transitions in pitch.
Rocksmith displays six horizontal lines at the bottom of the screen that represent the guitar's six strings—E, A, D, G, B, and E—and show you which ones to play. The game color-codes them to try and make it a little easier to comprehend all this visual information at once, but there's no way around it—it takes quite a bit of practice and memorization to get used to this. You really need to practice to the point that you know intuitively which color belongs to which string. Otherwise you'll always be looking down to pick out which string you should be playing, and will never be able to keep up with the song.
Electric guitars have come a long way since then, and today you’ll see many different designs. But you can still find big hollow-body jazz boxes that hearken back to those early days in the lineups of many manufacturers. They’re best suited for jazz players looking for a warm, woody sound. Of course the technology has improved greatly in the past eighty years, but these instruments still have a nice vintage vibe. You’ll sometimes see these instruments referred to as semi-acoustic.
A Distortion pedal is a must, it really helps bring out those chords, solos and riffs and makes sure they stand out. It gives you the volume jump when you need it and changes the overall sound of your guitar, giving it power and aggression. Of course, you don’t always have to dial in the pedal for bone crushing riffs as a distortion pedal can provide a smoother sound, but at least the option is there!
Both Brian May from Queen and Ritchie Blackmore did use treble boosters for sure in their rigs to get more gain out of their amps. Germanium transistors are very inconsistent and are subject to temperature changes so they can be finicky. They also certainly color your tone to a large extent, which is something you may want. Clean boosts that use silicon transistors are much more common and reliable, they can also boost your signal without effecting your tone too much. For a general clean boost I would go for a modern one. If you want an old school sound, I’d check out a germanium based unit. Or like me, I’d get both.
Welcome to Silesia Guitars, the guitar repair shop in Shoreline that is dedicated to taking good care of your dear friend, the guitar. We are located in Shoreline, just 15 min north of downtown Seattle. Our work consists of repairs of anything from broken headstocks and  cracked guitar tops, through replacing/installing electronics and custom inlays. Just need a set up or a string change? No problem! We try to accommodate any needs, big or small. Usually, the cheaper the guitar, the more it would benefit from being professionally set up. Evaluations are free, so stop by with your guitar today and let's talk about how we can help you get the most out of it!

You've bought most ANY new guitar that sells for less than about 700-bucks.  Seriously.  These days there are LOTS of really decent guitars out there in the $300-$500 price range.  Guitars designed well (and by that I mean ripped-off from Leo Fender), with bodies and necks that have been cut precisely by high-end CNC machines, decent hardware, and again a nice CNC-finish on the frets and good-looking automated paint jobs.  All in all, a guitar that plays well, intonates and stays in tune well, and looks great.  But ... sounds mediocre!  Yep, ALL manufacturers skimp on the pickups today, at least on any guitar less that about  $700-$1000.  Great guitar with midlin pickups?  Yea, fix that!

In the most commercially available and consumed pop and rock genres, electric guitars tend to dominate their acoustic cousins in both the recording studio and live venues, especially in the "harder" genres such as heavy metal and hard rock. However the acoustic guitar remains a popular choice in country, western and especially bluegrass music, and it is widely used in folk music. Even metal and hard rock guitarists play acoustic guitars for some ballads and for MTV unplugged acoustic performances.
The Les Paul Traditional 2019 is one of the latest iterations of this iconic guitar, bringing over the same pleasing aesthetics and rock friendly tone using modern production methods for improved reliability, consistency and expanded tone options. The body features a classic mahogany body with no weight relief, and a AA grade figured maple arched top. The 24.75" scale length mahogany neck is topped by a 22-fret fingerboard that has a nut width of 1.695". Giving this guitar its classic voice are Burstbucker 1 & Burstbucker 2 humbuckers, with Orange Drop capacitors that replicate the ones found inside vintage Les Pauls.
Been meaning to try this for years.... Should have done it earlier! It really works well for me, despite a puny Atom cpu in an HP netbook and a kludged lead from an electric Ukulele stuck into the microphone socket. Yes, this lash-up can be noisy - the impedances are mismatched, the signal levels too, but a very respectable result indeed. The processing is highly effective and the presets are (of course) variable in their suitability (not every effect is ideal for a ukulele) with gems that include a really decent and surprising choice of autowah effects. Never thought I'd say that. The user interface is logical, but there is a lot of it. That's because it can do so much. Fortunately there is a 'Random' button that creates random new patches for you - keep pushing it and some fun stuff can emerge. Documentation is helpful - press F1 and have a look, it even includes hardware suggestions and hints. I intend to follow that religiously so as to get the best from this gem - and I'll be spending money to get the suggested full fat Behringer interface (~£20) from Amazon, and trying a less-compact machine with some more CPU to see if that adds to the experience. Problems? A couple of the presets do seem to crash Rakarrack - but apart from that irt has been solid. Recommended to give it a go, if you have not already done so. Both guitar an uke work well with this.
Jump up ^ Hicks, Michael (2000). Sixties Rock: Garage, Psychedelic, and Other Satisfactions. University of Illinois Press. p. 18. ISBN 0-252-06915-3. While most of the documentation on early fuzz boxes has been discarded or lost, the earliest such devices appear to have been introduced in 1962. The best known from that year was the Maestro Fuzztone FZ-1...
Korg SDD3000 Preamp Clone Great project! Since I finished it, it become one of my always on pedal! With a extremely subtle compression... Eclipse Device-2 DOPAMINE OVERDRIVE based on the Klon Centaur circuit. Materials: 01. Xicon 1% metal film resistors. 02. Kemet 5% MLCC (C0G) 03. WIMA Box Film... Refractor Black Octopus Pedalworx More build reports
A final tip: not a lot of people know this, but Antares Auto-Tune works rather well with electric guitar. Of course Auto-Tune is monophonic, so it will dutifully ignore chords and double notes, but it will come into play when it detects a single note. You might reasonably ask whether a guitar tuner might not be a wise investment, but the reason I suggest Auto-Tune is not to compensate for a badly tuned guitar, but rather to pull imprecisely bent guitar stings into pitch.
Seagull guitars were first manufactured in Quebec in 1982. Their goal was to introduce a high-quality guitar with all the essentials for a reasonable price. It goes without saying that they completed that goal, as Seagull guitars are still here today.Seagulls are great for both beginners and pros. They are durable and high-quality. They have incredible sound-quality and they have something for everyone. They make both acoustic and electric guitars at reasonable prices. Seagulls are easy to play even for beginners. Additionally, they strive to reduce the impact guitar manufacturers have on the environment. They use sustainable wood sourcing so that they can avoid deforestation. Reclaimed wood is often used in the production of Seagull guitars. 

Almost all bass amplifiers are designed for use with an electric bass, which has magnetic pickups. When a double bass player is plugging their instrument into a typical bass amp, the signal usually comes from a piezoelectric pickup mounted on the bridge or beneath the feet of the bridge. The direct signal from a piezoelectric pickup does not usually sound good when it is plugged into a standard electric bass amp. Many upright bass players who use piezoelectric pickups use a preamplifier or preamp-equipped DI box before the signal is sent to the bass amp. The preamplifier helps to ensure that the impedance of the pickup signal matches the impedance of the amplifier, which improves the tone. Some preamplifiers also have equalizers which can be used to modify the tone.

Reverend guitars are known to sport many premium appointments despite their modest price tags. And the Jetstream HB is no exception. It has a comfortable roasted maple neck, a Wilkinson WVS50 IIK tremolo, pin-lock tuners and high-end electronic components. A korina body and a 12-inch-radius roasted maple/blackwood fretboard (depending on the finish) complete the other notable specs on this guitar.

About the only thing that all these producers have tended to agree on across the board is that you should try to get your guitar sound as good as you can before you even think about recording. "The stupidest thing that any musician can do," remarks Tony Platt, "is to just plug in and play and say 'make that sound good'. It doesn't work like that. I will always say to the guitar player, for instance, 'Is that sound coming out of your amplifier the sound you want to hear? If it isn't, show me what it is and we'll try to get somewhere close to that before we even put a microphone on.' It's a waste of everybody's time to sit there tweaking stuff until somebody says 'Oh that's good.'"
Unlike distortion or overdrive, fuzz is meant to not sound like an amp at all. It is meant to add harmonic content and transistor-like goodness to your tone. Fuzz boxes were used extensively in the 1960s to create an over the top distortion sound. Many times fuzzes will completely change the sound of your amp, so be careful and really focus on buying one that has the sonic makeup you are looking for. Hendrix, Cream-era Clapton, and Dan Auerbach are well known fuzz users.
You will agree with us that the journey to the Canaan land of guitar mastery isn’t always one with bed of roses. Rather, it seem very daunting, especially with so many different types, styles, shapes and sizes in the marketplace—all craving for the bulging eyes of your wallet. But as with anything, the options before you can become clearer if only you can endeavour to filter out the unwanted options—that is, those that aren’t compatible with your immediate needs.

The Estimated Values shown on each web page are out-of-date in many cases. One person cannot possibly keep every page up-to-date, so that is why we created a Wiki system to allow anyone to help maintain the database. We invite anyone who sees a problem with any Estimated Value to report it to us by clicking the Report A Problem icon at the top of each page (it looks like this ).
Generally speaking, the amp market tends to be less fueled than other categories by the year-to-year cycle of new product hype that kicks off at the annual NAMM show in January. While there are always hot new models and brands (Quilter amps being a good recent example), amp sales on Reverb are largely dominated by tried-and-true favorites and good deals on used gear.
The OM-28 E Retro is one of the more recent guitars to come from Martin's OM line, and it is the consummate '30s era style acoustic guitar. The company took their time to carefully replicate vintage OM-28 guitars, from the aged solid sitka spruce top and solid East Indian Rosewood back & sides, down to the smallest appointments - resulting in a guitar that not only sounds amazing, but looks museum-level amazing as well.
To tell you the truth, in the first few years i started playing, after i learned the use of the switch, I was approach by a man that also a guitarist and asked, "YOur guitar sounds good, I believe it so expensive". Well, I bought the guitar only for $150 dollars, But, I toggled the switch to the right pickup on the right time, makes my guitar sounds like an expensive guitar.
The guitarist and composer Francisco Tárrega (b. Vilareal, Spain in November 29, 1852-d. December 15, 1909) was one of the great guitar virtuosos and teachers and is considered the father of modern classical guitar playing. As professor of guitar at the conservatories of Madrid and Barcelona, he defined many elements of the modern classical technique and elevated the importance of the guitar in the classical music tradition.
Matt Heafy, of Trivium is working on a signature 6 string and 7 string Les Paul with Epiphone. Heafy has said that ‘(I) chose Epiphone, because I have to work my way up, from an Epiphone, Gibson USA, then a Gibson Custom. The thing is if it was a Gibson Custom, the kids would be paying $6000 for it, and they can’t afford that. I want it to be affordable but something I will use on stage”[citation needed]
More often than not a customer chooses bone as a replacement for cheap plastic nuts supplied on new guitars. It's such a good material for instruments because it's really dense – meaning vibrations travel through it faster meaning that more vibration is transferred to the rest of your instrument - essential! It's also great because it contains natural lubricants which are essential for tuning stability.

Rackmounts are most commonly used in recording studios and "front of house" live sound mixing situations, though professional musicians who play electric bass, electric guitar, or synthesizers may use them in place of stompboxes, to create a rackmounted head unit for their speaker cabinet(s). Rackmounts are controlled by knobs, switches or buttons on their front panel, and often by a MIDI digital control interface. During live performances, a musician can operate rackmounted effects using a "foot controller".[14] By setting up effects in a rack-mounted road case, this speeds up set-up and tear-down, because all of the effects can be connected together with patch cords (which can be left connected permanently) and all of the units can be plugged into a power bar. This means that a musician only needs to plug in the main power bar into AC Mains power and plug their instrument into the rack, and the last effect unit's output into their instrument amplifier and/or the PA system.
The idea behind this site is to share my experience with Do It Yourself approach to guitars, amplifiers and pedals. Whether you want to save a couple of bucks by performing a mod or upgrade yourself instead of paying a tech, or want to build your own piece of gear from scratch, I'm sure you will find something interesting here. Also, this is the home of DIY Layout Creator, a free piece of software for drawing circuit layouts and schematics, written with DIY enthusiasts in mind.
The brands we talked about today are considered to be the most trusted on the market. Even so, you might want to skip the bare-bones entry level models as those are bound to come with a flaw of some sort. We showed you a number of guitars from each of the brand’s current lineup. Those represent well rounded and balanced choices for beginners and intermediate players alike.
I personally use Vegas, Sonar, and REAPER. I would not recommend Vegas or Sonar for live playing, if for no other reason than both have crashed on me during recording sessions, and I do not easily forgive that. REAPER (Audio Production Without Limits) never, ever crashes. It’s not as full featured as some DAWs, but what it does, it does well. I use it for all my recording.
When looking at acoustic pianos, there are so many variations that can lead to differences in tone: upright vs. grand, hammer types, mechanical condition, the player, mic choices, and mic techniques. No matter what, though, the piano tends to be a behemoth in the mix – for better or worse – so most often you'll be looking to cut holes out for other things in your mix.
If you are looking for a guitar that is not only surpassing quality levels but also looks classy, Gretsch is the one you require. The company certainly makes some genuinely beautiful instruments that appeal your eyes. Although, some Gretsch guitars come with a considerable price tag, yet they certainly worth the money. Likewise, you can also find several hollow and semi-hollow body guitars at Gretsch that are quite affordable. It means every player from all levels will surely find something of their interest over here.

Carrying on the tradition of his hero, Derek Trucks has taken Duane Allman’s sound and technique and forged ahead with one of the most soulful slide sounds ever to be heard.  His uncle, Butch Trucks, was the drummer for the ABB, and Trucks began to play with the band at a very young age before becoming a full time member and keeping Duane Allman’s heritage alive for a new generation of listeners.

Personally, I chose the Everlast version of Folsom Prison Blues because I find that the Everlast cover is so much more fun to play along with. The Everlast version is a little bit faster to play along with, but I think of a twelve bar blues while I’m doing the chord progression with this song; it really helps me to keep up and maintain a steady tempo.
On regular occasion I have stuff come through to me after the instrument owner has already taken it to another shop that, for whatever reason, could not fix or solve the problem. This time, a supposedly professional and legitimate shop... and after the customer PAID FOR WORK THAT DID NOT YEILD THE DESIRED RESULTS. That just boggles my mind a bit. I would never charge a customer unless they are happy and satisfied with my work.
Granular Guitars is the second exclusive VST Sound Instrument Set created by sound designer, composer and multi-instrumentalist Simon Stockhausen. Adding to the sound libraries of Padshop and Padshop Pro Granular Guitars spans nearly three gigabytes worth of studio-grade recorded samples, covering various acoustic and electric guitars as well as providing more exotic instruments like psaltery, celtic harp and oud played in traditional styles, plus experimental ways of treating the guitar. With 260 presets, Granular Guitars includes big cinematic soundscapes, beds and pads, beautiful fragile textures, plucked string sounds morphed into alien noises, heavy metal sounds and overdriven guitar screams clashed with divine New Age sounds.

Sensitivity: Valve amplifiers (current drive) are sensitive to crossover resonances and speaker impedance variations. Quality speaker systems often used passive crossovers that were second-order, constant impedance, and critically aligned to avoid resonant effects. Some quality speakers had copper caped pole pieces, which helped damp impedance variations. Note:- With solid-state amps in voltage drive, power decreases as the speaker impedance rises. With valve amps in current drive, power increases as the speaker impedance rises. Therefore a flat speaker impedance is synonymous with a flat frequency response.
Let’s take a closer look at what’s known as the switching matrix. A switch’s poles are like separate channels that aren’t connected until you add a jumper wire between them. A SPST or SPDT switch has only one of these channels, while a DPDT switch has two. Likewise, 3PDT and 4PDT switches have three and four channels, respectively. A switch’s throws are simply the different sides of a switch. For example, a DPDT on/on switch has two channels (poles) with three lugs on each channel. Engaging the switch turns on one side or the other. When one signal is turned on, the other is turned off.
There was a band in Manchester called Sister Ray, who were just this scary bunch of men/reprobates. I guess word had got around that I had a knack and was a useful little guy to have around, and you only have to buy me some Coca-Cola and I was good to go. So I played with them. I started playing my first sort of shows in front of real [crowds] when I was fourteen.

Every guitarist who bends or vibratoes a string to make it sing owes a debt to B.B. King. With influences as diverse as T-Bone Walker, Charlie Christian and Django Reinhardt, the late guitarist turned the blues world upside down in 1952 with “3 O’Clock Blues.” Almost overnight, the harmonica was supplanted as the primary solo instrument in blues, as guitarists scrambled to imitate B.B.’s soloing style, especially in Chicago.
Struggling to get your guitar sounding sweet and creamy? Don't fret! STUDIO GUITARS is here to warm up your sound with a selection of certified studio-fresh guitar loops recorded by Prime Loops' own professional master of the strings! Using some of the most classic equipment around, we've covered every curve of this awesome instrument's sound with an incredible collection of acoustic and electric guitar samples.
Every guitarist who bends or vibratoes a string to make it sing owes a debt to B.B. King. With influences as diverse as T-Bone Walker, Charlie Christian and Django Reinhardt, the late guitarist turned the blues world upside down in 1952 with “3 O’Clock Blues.” Almost overnight, the harmonica was supplanted as the primary solo instrument in blues, as guitarists scrambled to imitate B.B.’s soloing style, especially in Chicago.
I didn’t use any guitar effects. I just used a straight into the amp, and I put the amp up pretty hot, though. The tweeds go up to 12 usually, and this one I had on 10 on the bridge pickup on the Strat. I was using a glass slide. Here’s the slide I was using. It’s like an old medicine bottle. I put some felt in there to make it a little bit of a tighter grip on my finger, but it’s the same slide that Dwayne Allman used.
GUITAR BLEND/BALANCE POT, 500KA.  Bourns dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. 1/4" knurled shaft diameter. Solder lugs. 3/8" bushing.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special MN taper used for balance/blend pots.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
In this range, you will find many premium options. Many guitars in this range will offer some of the best features available. Again, you will find many upgrades from less-expensive models. Often, these are considered the standard models. Of course, you certainly don’t have to spend $1000 to get a great guitar. However, most guitars of this caliber will satisfy even the most discerning player. Musician’s Friend’s Private Reserve collection includes instruments that cater to the most demanding professional guitarists’ requirements.

Harmoniser – a frequency-based effect that sounds like a second guitarist is playing in harmony with the original guitar signal. The effect is created by doubling the guitar input signal and then shifting the pitch of the double up or down at a certain interval (usually a 3rd, 5th or octave). The harmony effect is often used in the metal and hard rock genre to play solos.
Since the Boss GT-1000 Guitar Effects Processor was announced at NAMM 2018, guitarists and bass players alike have been enjoying the functionality and unrivalled sound quality of the unit. We actually created a blog called 3 Reasons Why The BOSS GT-1000 Is Really Special, discussing 3 of the key features that make this stand out so much, but trust me when I say that there’s so many more reasons that this is easily one of the best multi-effects pedals ever made.

Yeah, I wasn't meaning to disparage either brand. While not necessarily "cool", they both offer solid stuff and a really good value that really competes with luxury brands. I'm not a car guy, so I'll stay on the guitar side for an example - Schecter can offer a mahogany body with a flame maple top and binding, set neck, ebony fretboard with abalone inlays, 25.5" scale, compound radius, original Floyd, and name brand pickups for $1000, give or take. Seems like you have to get up into Ibanez's Prestige line or the Jackson USA line to get all that, and then you're paying around $2k.

Guitar wiring refers to the electrical components, and interconnections thereof, inside an electric guitar (and, by extension, other electric instruments like the bass guitar or mandolin). It most commonly consists of pickups, potentiometers to adjust volume and tone, a switch to select between different pickups (if the instrument has more than one), and the output socket. There may be additional controls for specific functions; the most common of these are described below.
For his work on Supernatural, Glenn Kolotkin turned to elaborate multi-miking as a way of managing Carlos Santana's complicated setup. "I used multiple microphones on Carlos' guitars: Electrovoice RE20s close, Neumann U47s further away, an SM56, U87s. He was playing through an assortment of amplifiers at the same time, and by using multiple microphones I was able to get just the right blend."
Beyond specific favoured mics, a number of engineers also mention more general principles when choosing pairs of mics for guitar recording. Jim Scott and Stephen Street both mention using a 'cheap' or 'bad' mic with a good mic (both give the SM57+U87 combination as an example). "Between the two you can find the ideal sound," remarks Jim, "and you can get brightness and fullness."
I am a guitar teacher of 15 years and a tech junkie, so I prefer to steer people towards online video lessons. I believe that with the multimedia technologies of the 21st century, beginner video lessons are the most efficient way of learning guitar from home, and are most advantageous from a pricing point of view as well. I'll add some recommendations for video lessons after the book reviews, in case you want to see that side of learning guitar as well.
The new Martin electrics were offset double cutaway guitars which, in terms of shape, fall very loosely into a Stratocaster category. The cutaways are a bit wider and shallower than a Strat, both pointing away from the body. The horns are much more rounded than a Strat. Like a Strat, the waist is slightly offset, and the lower bout has a slightly asymmetrical slant to it. The bodies were initially built of hard maple and rosewood laminates that imitate the look of neck-through guitars popular at the time, but actually have neck pockets with glued-in mahogany necks. These had unbound 22-fret rosewood fingerboards, dot inlays and a distinctive three-and-three variation on the old Stauffer/Viennese headstock � which may have originally inspired Leo Fender’s Strat creation � with script CFM logo decal. (Prior to developing the Strat, Fender visited the Martin factory and was shown some of the old Stauffer/Martins with the round-hooked Eastern European headstock shape.) These all featured chrome Sperzel tuners, brass nuts, twin humbuckers, threeway selects, two volume and two tones with chrome dome knobs, and a Leo Quan Badass bridge.
An octave generator is a simplified form of pitch shifting. This effect will allow you to add an octave—usually below—the fundamental note. Units that add a lower octave exclusively are referred to as sub-octave generators. They can add a lot of depth to the guitarist’s sound. Many bass players also use sub-octave generators to significantly fatten up their sound.
{ "thumbImageID": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Cruz-Teal/L20238000003000", "defaultDisplayName": "Ernie Ball Music Man StingRay5 Special HH Ebony Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cruz Teal", "sku": "sku:site51500000222146", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,300.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Cruz-Teal-1500000222146.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Cruz-Teal/L20238000003000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Aqua Sparkle", "sku": "sku:site51500000222145", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,300.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Aqua-Sparkle-1500000222145.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Aqua-Sparkle/L20238000004000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jet Black", "sku": "sku:site51500000222144", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,300.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Jet-Black-1500000222144.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Jet-Black/L20238000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Charcoal Sparkle", "sku": "sku:site51500000216758", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Charcoal-Sparkle-1500000216758.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Charcoal-Sparkle/L20238000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Coming from Martin's Travel Series, the LX1E Little Martin has smaller proportions, with a total length of 34", body width of 12", shorter scale length of 23" and 1 11/16" nut width. While it can be a bit too small for some, it is easy to appreciate its impressive workmanship, bearing the same build quality and materials as found on their more expensive models. With the LX1E, you can own an affordable Martin guitar that has been proven to be a true workhorse instrument.
There are a few approaches you can take to get started browsing all this tablature. For example, you might start by looking for music that fits a certain theme. Alfred's 2015 Modern Christian Hits, the Hal Leonard The Ultimate Christmas Guitar Songbook and the Hal Leonard VH1 100 Greatest Hard Rock Songs are just three examples of tab books aimed at specific genres or occasions. Another idea would be to narrow down your options to tablature with included CDs; they give you the option to play along, making the songs easier and quicker to learn.
In 1995, an effort was made to re-introduce Rickenbacker acoustics, with factory production beginning in their Santa Ana manufacturing facility in 1996. Four models of flat top acoustic Rickenbackers were depicted in factory literature (maple or rosewood back & sides, jumbo or dreadnaught shape). Each of these four models was also available in both six- and twelve-string configurations, yielding a range of eight distinct instruments.[11] (The 760J “Jazzbo,” an archtop model, was only built as a prototype, with three examples known to exist.) It is estimated that fewer than 500 Rickenbacker acoustic guitars were built before the factory shut down the acoustic department in mid-2006.
Nickel ES-335 diamond trapeze tailpiece. This is a short version of the standard ES-335 style tailpiece which was also used on many arched top instruments. Overall length of Tailpiece not including hinge = 3 1/8 inches. Side to Side width at bar = 3 9/32 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

Body:  Soundboard:  two-piece spruce: medium grain broadening toward the flanks. Back: two-piece spruce: fine grain on bass side broadening to medium at the flank, wide grain on treble side; slightly arched; two f-holes; recessed 11 mm from edge of ribs. Ribs: 7-ply plywood, the outer layer birch, the inner layers mahogany, the outer veneer layer grain running perpendicular to plane of top and back; panel on bass side with nickel-plated steel plug; slides out for access to pickup unit. Head: mahogany veneered with white celluloid on both faces. Neck: mahogany; integral with head; rosewood stripe.

Are you seeking reliable information and or the evaluation of your vintage guitar's actual real world value today?.... JVGuitars has a simple solution and that is a Joe's Vintage Guitars E-Guitar Appraisal and they are only $45.00 per instrument its fast and its painless and will be conducted by email with no need for damage risk or shipping to and from. Help support JVGuitars service today and go ahead and just order your E-Guitar Appraisal NOW!.. We can send a quick Paypal invoice to you for this E-Appraisal and get started.... ORDER YOUR JVG- E-Guitar Appraisal TODAY! email us your request NOW for your Appraisal at
: Palmer is a U.S.A. company based in Miami, FL. They contract out the building of cheap guitars to China and such; while reserving the high end, high priced guitars for those made in the states (like most guitar makers today). I had one that had a broken head stock. I paid $50 for it, just as a camp guitar. It sounded fair, but I could tell it was made cheap. I'd compare them to a cheap Cort, Mitchell, or Fender.

Paul Kossoff, of Free and Back Street Crawler, favoured a 1959 Les Paul Standard. In 2011-12, Gibson’s Custom Shop made a reproduction of Kossoff’s Standard, featuring a so-called “green-lemon” flametop, two-piece carved maple top, mahogany body and neck, Custom Bucker humbucking pickups and kidney-bean shaped Grover tuners similar to those Kossoff had installed on the instrument. 100 Kossoff models were made to resemble the guitar at the time of Kossoff’s death in 1976, with another 250 in a VOS finish.
I put the pots into a wiring jig I made for Les Pauls: a piece of pickguard plastic with holes to match the LP control arrangement (cardboard works just as well). This lets me do my wiring outside the body, and everything fits back in neatly.The guitar’s controls were on a metal mounting plate. We decided to ditch the plate, sticking with the ’50s theme.

Effects on the Spider Classic 15 are a little easier to handle than those on the Champion 20. One knob accesses the chorus, flanger, phaser, and tremolo effects, while a separate knob accesses the reverb and echo effects. This arrangement makes it easy to blend different types of effects and makes the Spider Classic 15 a little more versatile than the Champion 20 if you are interested in coloring your sound more.

The pre-1945 braces have a scooped or "scalloped" profile, making them lighter in design and weight. Functionally this means a greater vibrating surface (the guitar's top), and provides stronger bass response. Why did the Martin Company change from the lighter scalloped braces to heavier braces? The answer is in the strings. Many guitarists of that time were using heavier gauge strings, and these heavier strings were tough on the lightly constructed scalloped-braced Martins (especially on D-models with the long 25.4" scale). Martin didn't make a heavier guitar to withstand the extra string tension, so they compensated by adding more rigid (non-scalloped) braces to the guitar's top.

Great Gretsch "pumpkin orange color", and a great sounding, and playing import reissue. Knobs replaced with dice, and a couple of decals added. Has factory installed Epiphone labeled Bigsby trem-tail piece, no longer available on this model. Chrome p-90 pick-ups. Guitar, and original hard-shell case in like new cond. New list on these is $1195.00 with original hard shell  case.

The strings movement moves the magnetic field creating current in the coil of the pickup. The string does not create the current the movement does. If you placed a solenoid beneath the pickup and moved the pickup you would also create a current in the coil. If you took the strings off the guitar, and held a hammer head over the pickup and activated the solenoid you would get a current in the coil.
When you hit a string it will vibrate. It will continue to vibrate until the energy put into it is expended. Where does that energy go? Well, it is expended through movement. That movement is what the pickup "sees" and translates into sound. In a world where 100 % of the initial energy imparted by the strum to the string was expended through movement, wood doesn't matter.
A sub-brand under the same umbrella as German brand, Behringer, Bugera has been flying under the radar for some time – though they make some surprisingly clever amplifiers. The BC15 is one such amp. Styled like its predecessors from the ’50s and ’60s, this vintage-inspired amp benefits from a single 12AX7 vacuum tube giving it a lot more warmth and character than for which you’ll pay. And don’t let its size fool you, either – while it only has a single 8″ speaker, it offers up a whopping 30 watts, making for a surprisingly loud little machine. For the price, it’s seriously difficult to do better than this.
Where there is more than one pickup, a switch selects between the outputs of individual pickups or some combination; two-pickup guitars have three-way switches, and three-pickup guitars have five-way switches. Further circuitry sometimes combines pickups in different ways. For instance, phase switching places one pickup out of phase with the other(s), leading to a "honky", "nasal", or "funky" sound[citation needed]. Individual pickups can also have their timbre altered by switches, typically coil tap switches that effectively short-circuit some of a dual-coil pickup's windings[vague] to produce a tone similar to a single-coil pickup (usually done with push-pull volume knobs).