Like the Les Paul, the SG guitar models has an iconic status and it is another guitar coming from Gibson that has been passed-on to Epiphone to cater a wider audience because it carries a much friendlier price. This SG Special has the famous devilish cutaway body made from mahogany and has a bolt-on okoume neck with a comfortable to play slim tapered D-profile having 22 frets.
The PRS S2 Custom 24 is a stripped down version of the expensive yet sought after PRS Custom 24 guitar, and because of its accessibility, it helped put the Custom 24 design into the hands of more players. What's impressive about the S2 Custom 24 is how it retains the same attention to detail and quality as PRS' more expensive guitars, making it a viable instrument even for those who can afford more expensive alternatives.
Don’t be fooled by the lack of reviews for this guitar on Amazon. Dean makes some really solid guitars, they just happen to be a less popular brand than the other big names. I love this one because you’ve got 2 humbuckers for powerful rock and metal tones, but you get additional tonal versatility thanks to a push/pull coil tap. So, the C350 definitely isn’t a one trick pony. The flame maple veneer adds a nice finishing touch.
The display borrows a lot of its design cues from Guitar Hero—which is probably a good thing, since so many players are already familiar with that system. Like GH, Rocksmith has vertical columns to show you which frets to hold, and the notes move toward you until they reach a line that represents the moment you're supposed to play them. However, GH's display didn't need to move since there were only five buttons. Because it has to span the entirety of an actual guitar neck, Rocksmith's display floats up and down. If you're playing primarily notes between the fourth and seventh frets, for example, it will show you just those frets on the screen, then slide up to the 10th or 11th when it's time for you to play those.
Vocal Widening: One of the send effects I most frequently use at mixdown has got to be the classic vocal-widening patch that I always associate with the vintage AMS DMX1580 delay unit. From a mono send a stereo ADT-style effect is created using two pitch-shifting delay lines, panned hard left and right. Normally, I set the first channel to 9ms delay, with a pitch shift of -5 cents, and the other channel to an 11ms delay, with +5 cents of pitch shift. That said, though, I will often tweak the delay times a few milliseconds either way, as this can dramatically alter the effect's tonality. Mike Senior
One thing to point out here. When you take the strings off a Les Paul, there is (usually) nothing holding the bridge or the tailpiece on, so be careful with this. That said, I do want to mention that while the strings were off this guitar, I took the opportunity to lower the tailpiece. I prefer the tailpiece to be lowered all the way to the body if possible. Many believe that this will give you better tone/sustain, although it's hard to prove such a thing scientifically. That said, there is very little reason for the tailpiece to be anywhere other than as low as possible anyway.
I have a hunch its a cheapo guitar and probably not worth a neck reset. Can't tell if it has a bolt on neck. my other guitars all have more warped soundboards though. The saddle is sort of cradled in wood by the bridge, the angle could be better, but I'm surprised there is any angle considering the saddle only pops out like a millimeter. The bridge curves down towards the pins to provide the angle. It probably has been set up in the past by someone who wanted an acoustic guitar to play like an electric, then it got reversed it later by way of the truss rod.
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
While these sum up the most significant Gibson tone woods, other species do occasionally contribute to the brew. Swamp ash lends the Les Paul Studio Swamp Ash a degree of twangy sweetness and a round, slightly scooped midrange, while the most common Gibson fingerboard woods, rosewood and ebony, even make their mark on the frequency spectrum. Rosewood generally helps to add a certain thickness and creaminess to the tone—warming up the voice of a maple neck, or adding depth and cohesiveness to that of a mahogany neck—while an ebony fingerboard, long considered an upmarket option, contributes tightness, brightness, and a quick attack.
Fender has shown the spec sheets of its popular Mexican-built Deluxe Series Roadhouse Stratocaster model some love to create a reboot that comes seriously well appointed. The upgraded model features an alder body and bolt-on maple neck, with the option of maple and rosewood fingerboard, finished with satin polyurethane. Keep sniffing around and you'll find other features like the 'Modern C' neck profile, 22 narrow/tall frets, a contoured neck heel, synthetic bone top nut and a set of locking tuners with vintage-look buttons. While the previous editions of the Roadhouse and came with a 241mm (9.5-inch) fingerboard radius, the new model packs a flatter 305mm (12-inch) camber. Yes, the same radius as a Gibson Les Paul, making for easier string bends and lower action. The new Roadhouse features three Vintage Noiseless (1st generation) single coil-sized humbuckers wired to a five-way pickup selector blade switch, and master volume and tone controls. Lurking between the volume and tone knobs is the V6 preamp control, a six-position rotary switch that gives you access to a series of tweaked single-coil tones. Plugging in the Roadhouse reveals a slew of classic Strat tones. The pickups exploit the natural tone and woodiness of the guitar, while the Noiseless aspect lives up to their vow of silence, making them indispensable in a recording situation. As a result, bar metal, this is the best Fender electric guitar for just about all scenarios.
When sliding or rolling your amplifier into the boot of your transporting vehicle, ensure that the controls are not damaged. When transporting your combo amp or cabinet, make sure that the face is downward so that the controls are not put under stress. If you cannot transport these face down, it is better to place the combo on its side and not on the castors. If you are a frequent traveler, you might want to invest in a flight case for better protection.
BAJAAO brings to you the best top notch Electric Guitars from across the world, with the lowest price guarantee. We have a huge range of electric guitars to help you find the one that fits your requirement and budget too. We are dedicated to make sure that we have an instrument that suits you whether you are looking for a beginner’s electric guitar or a seasoned professional’s axe, from the best brands worldwide such as Ibanez, Cort, Fender, Gibson, Aria, Epiphone, Washburn, Walden, Cort, ESP, PRS, Jackson, BC Rich, Dean, Pluto, Squier, Schecter, Greg Bennett, Taylor, and a long list of other brands to buy from. Buy the best Electric Guitars online with BAJAAO.com with the best and affordable price in India. Make your shopping experience a wonderful one with us.
If you have been looking for an electric guitar that effectively blend tradition with modernity; the Gibson Les Paul Faded 2017 is the excellent choice that fit such description. This guitar stands as the perfect union between the old and the new—featuring a 490R modern and 490T humbuckers, closely followed with 22 frets designed for amazing bends and great feel.
Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: http://www.guitarnuts.com/wiring/shielding/shield3.php Some great info on that site, you should have a browse around!
Next up, Tolerances. The tolerance refers to the accurate rating of the pots ohm, so if it's a 250k pot, then it will be accurately rated at a tight tolerance of around +/-5% to 250k, a true rating. Some low quality pots can creep wildly away from the ratings, you'd be surprised. I've removed CTS pots from US and MIM Fender guitars for example, that were incredibly inacurate. 250k stamped pots that were not even 200k, and also in other cases past 300k. So, why does that matter? Well if for example we're referring to a single coil equipped guitar like a Stratocaster, they recommended a pot ohm value of 250k in both volume and tone positions. If a lower quality pot states 250k but actually reads much lower, perhaps 200k, or even substantially higher, it could result it a darker or brighter tone respectively, than what would bring out the best in the guitars pickups. Quality pots like the CTS 450 series or TVT I have come to trust, have super tight tolerances, +/- 7% and most cases even tighter +/-5%. This accuracy is worth it, a pickup manufacturer sets out to design a certain model of pickup that will sound it's 'best' (obviously this is subjective), optimal is probably a better word, for a certain pot rating. If you're fitting a harness with tight tolerance, accurately rated pots then chances are you're going to be getting the best from your pickup set. That's the important bit for me.
The electric guitars have to be plugged in for sound to be produced. A cable and an amplifier are a must for them to produce sound. They are largely dependent on some electronic pickups, having between one and three pickups on their bodies, for them to produce this sound. They are relatively much lighter and have lighter gauge strings when compared with their acoustic counterparts. It is therefore a better option for the small statured or small-handed players. Getting comfortable to hold a guitar or fret the notes is quite physically challenging when working with the acoustic guitars than with the electric types.
Early Teisco instruments were primarily electric Hawaiian guitars and accompanying amps, although the company quickly got into electric Spanish guitars, too. Little information is available on these earliest Japanese Teiscos. Teisco guitars from most of the ’50s were clearly inspired by Gibson; presumably this was true from the very beginning. We’d welcome any information on these early Teisco guitars and amps, including photos and photocopies of catalogs or ads, from our Japanese readers, if they can provide them.
Most people think of Roy Orbison as the super-smooth crooner who sang songs like “Crying,” “In Dreams” and “Only the Lonely.” But Orbison was also a wicked guitar player, who ripped out several impressive solos on early Sun Records singles like “Ooby Dooby.” In fact, Sun owner Sam Phillips was more impressed with Orbison’s guitar playing than his singing during the early days of the rocker’s career.
Washburn is an EXCELLENT brand. I have owned an N4, 2 N2's, and their latest, cheapest Nuno model for my daughter. My daughter's guitar is amazing for the price I wish I had such quality for my starter guitar. I would put my N4 up against ANY guitar- period. Plus, whenever I have contacted the company, they have top notch customer service. I know this isn't about amps, but I wrote them about an issue I had with my Randall amp ( a division of Washburn). Without me asking, they mailed me an amp part with an apology. Top notch.
By the late 1970s, costs of manufacture in Japan had risen to such an extent that it was difficult to make student-grade guitars over there. It was far less expensive to manufacture instruments in Korea. Numerous factories were built, and existing facilities in Korea were expanded. Samick built a factory capable of producing one million instruments a year. Japanese companies invested heavily in Korea so that they would be able to produce their low-end models in Korea and high-end models under the same brand names in Japan. The early Korean-made instruments were not as good as the Japanese ones, but it did not take nearly as long for Korean quality to improve as it did for the Japanese to go from making crude low-end models to sophisticated instruments suitable for professional use. The Koreas had the benefit of all of the Japanese experience especially in the cases of factories with Japanese ownership or management.
Born in Australia, Stephanie Jones is one of most promising guitarists of young generation. She started to learn guitar at Wembley Primary School in Perth when she was 11. In 2010 Stephanie started her studies at the Australian national University and she graduated with First Class Honours in 2014. After winning several guitar competition, Stephanie was awarded an Australian Music Foundation Scholarship, which included a performance at Wigmore Hall in London. She has performed extensively including two Australian tours, a New Zealand tour, and with the Weimar Guitar Quartet, a Germany tour. Currently Stephanie is studying a Masters in Classical Guitar Performance with Thomas Müller-Pering at the prestigious University of Music Franz Liszt.
This is like asking, how long is a piece of string? There are more brands than can be counted. This is because the factories in the east that produce mass production instruments often change name, and will label the same instrument with different labels depending on which market it is going to. Then there are the individual luthiers, small companies, large companies, toy shops hobbiests. The answer to this therefore would have to be infinite.
On guitars with bound fingerboards, shrinking of the binding can produce a gap large enough to catch the treble E string when pulling it over the edge. If only a few our present I will fill the gap to eliminate the problem. If the binding shrinkage has introduced gaps at every fret, the board should be re-radiused to eliminate all gaps and re-fretted.
I played a hollowbody Ibanez almost exactly like this Artcore back when I was studying Jazz guitar in college. For the aspiring Jazz beginners out there, this is the guitar to start with if you’re wanting to stick closer to the “traditional” Jazz-type guitar without spending a fortune. However, make no mistake, this isn’t just a Jazz guitar. With 2 humbuckers you’ve got plenty of muscle for Blues, Rock, Rockabilly, etc.
Conventionally, guitarists double notes in a chord to increase its volume, an important technique for players without amplification; doubling notes and changing the order of notes also changes the timbre of chords. It can make a possible a "chord" which is composed of the all same note on different strings. Many chords can be played with the same notes in more than one place on the fretboard.
I lost a wonderful EMPRO les paul custom model In a plain top brown finish (it was at a friends house in Dallas Texas who died in 2002 and was auctioned off before I could get down there from Michigan). It was my first electric guitar, bought at a pawn shop in Sulphur Springs, TX in 1989. I loved that guitar and have only seen about three other Empros since then. I did not see the Empro badge on this site. Anybody know the maker?
As has already become apparent, the resonator instruments which made both the National and Dobro names in the late ’20s and ’30s were not the only effort underway to increase the volume of the guitar. The ampliphonics found immediate acceptance among Hawaiian players, notably Sol Hoopii, the very first to record with them when he used a prototype in his first session for Columbia on October 18, 1926. This was used on “Farewell Blues.” But they still didn’t satisfy the desire of orchestra guitarists to get out of the rhythm section. In addition to metal resonator cones, electricity was waiting in the wings, and National, Dobro and National Dobro would play a significant role, both directly and indirectly, in that ultimately triumphant development.
Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.
I wanted the action lowered on two acoustics and a strap button put on. I called 6 different places around town, each one quoting me prices ranging from $50-$60 for the setup (action adjustment) and another $10 for the strap button. I called Franklin Guitar and Repair and was quoted at $25-$30 for the setup and $5 for the strap button. What a steal! So I took both guitars. He looked at one and said all it needed was minor adjustments, which he did right then and there for free. The other, he kept overnight to adjust and add the button. I picked it up today. $15 TOTAL.
There is competition for Guitar Tricks and this is a good thing, as this makes sure that they have to keep improving. Prior to starting with Guitar Tricks I bought some lessons from True Fire. While the lessons were good and very well presented they needed to be downloaded onto a PC and could only be played in a special player program. TrueFire also offer an online service that includes group and one-on-one lessons. Another alternative worth checking out is JamPlay. JamPlay has been continually gaining ground on Guitar Tricks and is worth while checking out. They do not have a free trial period, but you can get started with a very low amount for the first month and they also have some free lessons. Another option is a fairly new program called Infinite Guitar. They seem to be doing a rather good job too and also offer some free lessons.
Artwork: Improved Fender pickups from 1944. 1) A general view of a guitar with the pickup shown in blue and the strings colored orange. 2) An end-on view (looking down from the head toward the bridge) shows one version with a single pickup coil (green) spanning all six strings. 3) Looking from the side, you can see how the strings thread through the pickup coil. 4) In an alternative design, there are six separate pickup coils, one for each string. From US Patent 2,455,575: Pickup Design for Instruments by Clarence Leo Fender and Clayton Orr Kauffman (filed September 26, 1944, issued December 7, 1948). Artwork courtesy of US Patent and Trademark Office.
The Destroyer is an Ibanez brand electric guitar model (originally) manufactured at the FujiGen-Gakki musical instrument factory for the Hoshino-Gakki Company. The Destroyer model was first introduced by Hoshino-Gakki in 1975 and was based on the Gibson Musical Instruments' Explorer design. The Destroyer has since undergone several design and line changes and has been available in both 6-string and bass versions.
Today's modern rock guitar sounds tend to be "drier" (less room ambiance and reverb), and most often use the close mic technique. There's really nothing to it. Simply use the close mic, run it through the compressor, set the compressor at a 3:1 ratio and adjust the threshold so that the compressor is usually working, but not squashing the signal too much. You will be able to make most of the tone adjustments you need at the amp or guitar, and chances are you won't need to tweak the console' s equalizer at all.
Frets on finished fingerboards may be tough to measure accurately when the finish has appreciable thickness (think Rickenbackers, 70s Fenders) as these manufacturers spray the finish over the fretted neck. I have measured a finish chip from a 70s Fender maple neck refret that was .010” thick – lowering the fret height by .010” (25% in the case of the stock medium wire at the time) from just finish alone. I recently refretted a 2008 Fender Eric Johnson Strat where the fret height prior to any work was .040”, yet the crown of the fret removed from the fingerboard was .045”. I personally do not like this feel and so often I will suggest refretting over a finished fingerboard when working with them rather than under the finish.
Epiphone Les Paul Special II Player Pack New from$249.00In Stockor 6 payments of $41.50 Free Ground Shipping Silvertone SS10 Citation Electric Guitar Package New from$150.95In Stockor 4 payments of $37.74 FREE 2-DAY SHIPPING Silvertone SS11 Revolver Electric Guitar Package New from$160.95In Stockor 4 payments of $40.24 FREE 2-DAY SHIPPING Epiphone Slash Appetite for Destruction Les Paul Performance Pack New from$349.00Coming Soonor 8 payments of $43.63 Free Ground Shipping See All Electric Guitar Packs
Read Full Review This electric guitar from Schecter has an awesomely low price for beginners out there with a genre of music in mind is to play rock and lots of heavy metal. The guitar has similarities in design with the Schecter Omen 6 series which is a higher model to the C-1 SGR, but the C-1 SGR also has the humbuckers for its pick-ups controlled by master volume, single tone control and a 3-way toggle to switch between pick-ups to get near on what the higher model can do.
Slightly out-of-tune strings on a bass may not jump out as much as on guitar (especially in chords), but when that bass line is sitting under other parts in the mix, even slightly off-pitch notes will make their presence known, and sometimes be harder to track down (why does this song sound a little “off”?). I’d use a tuner (h/w or s/w), but I’d also always verify by ear, before hitting record, and I’d check tuning periodically as the session progresses—just as with drums, hard players can easily put the instrument out after a few energetic takes.
Over a decade after putting down the guitar I was inspired to take it up again. I got this bundle since it includes all the essentials. HOLY COW!!! WHAT A GREAT DEAL THIS BUNDLE IS!!! First, the guitar itself is a beautiful, quality instrument. It's a solid top guitar with good sound, and a comfortable action and neck. It was easy to tune and is a tremedous value for an "entry level" guitar. Second, the case. There are better cases available but there are certainly alot of worse cases out there. Bottom line on the case, it's a $90 case by itself and you get it for less than $40 here. A great value if you ask me. Third, the tuner. It works, it's easy to use, that's all you really need right? Everything else is good.
If you’ve never listened to Chet Atkins, you should do it right now. The rockabilly player was a skilled instrumental guitar player, playing most of his songs without any backing from other musicians. For a great sample of his talent, give a listen to his version of “Mr. Sandman.” His alternating thumb rhythm and syncopated melodies are marvels of beauty and precision on the instrument.
Originally the Stratocaster was offered in a 2-color sunburst finish on a solid, deeply contoured ash body, a 21-fret one-piece maple neck with black dot inlays and Kluson tuning heads. In 1956 Fender began issuing solid Stratocasters with alder bodies. In 1960 the available custom colors were standardized, many of which were automobile lacquer colors from DuPont available at an additional 5% cost. The unique single-ply, 8-screw hole white pickguard held all electronic components except the recessed jack plate—facilitating easy assembly. Despite many subsequent Stratocaster models (including copies and the Superstrat), vintage Fender models are highly valued by collectors for their investment potential and players who prefer the timbre of older models.
Rackmounted effects are typically built in a thin metal chassis with metal "ears" designed to be screwed into a 19-inch rack that is standard to the telecommunication, computing and music technology industries. Rackmounted effects may be one, two or three rack spaces high. When purchased from the store, rack-mounted equipment is not equipped with the rugged chassis features used on stompboxes and amps that are designed to be transported as standalone units, such as corner protectors. Rackmounted units are typically mounted in a rack, which is housed in a road case, a tough plastic case with removable front and rear covers that can be latched on during transportation to protect the knobs and switches and then removed during performances. A rackmount unit may contain electronic circuitry identical to a stompbox's, although its circuits are typically more complex. Unlike stompboxes, rackmounts usually have several different types of effects.
We perform within include rings. Personal big assortment of pedals, a few I really like, a few foul odor. I quickly discovered how the just people who worry about the results tend to be additional music artists. The actual people( ladies dance mostly) might treatment much less. Therefore right now I acquired the tuner, as well as generate your pedal with regard to single sculpt.... that is this, as well as my personal sculpt rocks ! as well as straight forward. With regard to facilities felines it might be another tale.
Slicer – A dynamic effect that sounds like your guitar tone is chopping in and out. This percussive effect is akin to sequencer-type effects used by synthesizers. The effect turns the volume of the signal on and off, and sounds like the signal is being “chopped up” or “sliced” in a specified pattern. The BOSS SL-20 Slicer features 50 patterns to turn your guitar into a groove machine!
Mr. White is an incredibly underrated guitarist. His singles (From the White Stripes) always span with just three to four chords and his simplistic blues rhythm and picking styles have him overlooked most of the time. However, his masterful use of the Digitech Whammy and is erratic playing make for some of the most memorable guitar solos ever. Check out Ball and a Biscuit and try not to like that solo. One of my favorite Jack White moments was during the 2004 Grammys, where he took 7 Nation Army and went into a cover of Son House’s Death Letter (another artist who I had to unwillingly cut out of the list). In an awards show celebrating Justin Timberlake and Missy Eliot, Jack White took time to give a salute to where things got started, to an artist born a century ago.
If you really like to cover all options, record using any of the above methods but also take a straight DI feed with no effects and record that onto a separate track so that you can process it later. Some engineers have been known to use a recorded DI guitar track to drive a guitar amplifier, which is then miked up and re-recorded, but you could take the easier route of using a hardware recording preamp or a guitar amp emulator plug-in to process the track.
Are you running it through a cab simulator? That or proper eqing. Turn up the mids and drop a high pass filter on that sucker. If you're finding it still lacking check out the KeFir cab simulator and then just use the preamp you have now. I've had wonderful results with that. If you're not liking your preamp try out The Anvil by Ignite amps. Best clean tone I've had out of freeware.
Made famous by George Harrison in the ‘60s, the jangly Rickenbacker 360/12 12-string electric guitar has become perhaps one of the most iconic 12-string electrics. With a semi-hollow body and thru-body neck, the 360/12 is able to create a unique tone that is difficult to create with other 12-string guitars. Though this model has undergone many changes and seen many iterations through the years, the newer Rick 360/12 models have a slimmer neck and are still highly-sought instruments.
Specs for your guitar include an ash body and carved maple top (rosewood was an option) bound with an abalone border, and a 5-piece maple/rosewood through-body neck. Other features include the bound 22-fret ebony fretboard with brass circle inlays, a matched-finish headstock with abalone border, 3-per-side tuners, two exposed humbuckers, and controls for each pickup. Its ivory finish is probably the most desirable color for this model, but the guitar was also available in a natural finish that highlighted the maple or rosewood carved top.
Kansas guitars has been around since 1927. They made some very nice guitars. Some expensive and some inexpensive. But the real question is whom makes the guitar for Kansas? And that is non other then Cort. Yes Cort makes guitars for just about everybody and you dont even know. the big secret is cort guitars themselves are very well made but cheaper then most brands, but same or better quality then highline guitars. Cort bailed out fender and also built Fenders for many years. So in short Kansas is a well made guitar and there set neck models are awesome and run about $400 to $600. You cant get a set neck today for under $800. And if you want to see how many guitar brands have cort making there guitars do some research on Cort and you will be surprized. They have been around for ever and are the elite company in the business.
i have an old Dorado solid-body electric serial # 0726454 on the neck plate it says STEEL ADJUSTABLE NECK, then the serial number, then made in japan. it has abalone fret markers, and dorado is in abalone in the headstock, blonde finish white-black-white-black pickguard, and a funky trem. i was told once that maybe guild had made this guitar... seems pretty unlikely... and that it retains it's original value, it all seems pretty unlikely... but i don't know... please help!!!
A detailed study on MIT physics students has proven that online classes really do work. Guitar Tricks results show that online lessons not only work for physics but also for learning the guitar. A GuitarTricks member survey in 2010 found that 98% would recommend Guitar Tricks. 80% reported that they were learning faster than with any other method that they had tried before. Most members found that their skills increased from 3 to 5 (on a scale of 1 to 10) within a short period of starting the online lessons with Guitar Tricks.
You’ve decided to pick up an axe and learn to shred like one of the pros. While mastering the guitar is no easy feat itself, before you even start jamming you’ll probably find yourself looking through site after site trying to find the right instrument. It’s hard. There’s an expansive list of components to be taken into account: body styles, wood types, pickups, bridges, necks — and that’s just scratching at the surface.
We currently recommend the very popular Seagull S6 Original Cedar Slim as one of the leading beginner guitars and we named the Seagull Maritime SWS SG as the equal second highest rated acoustic guitar between $500 and $1,000 in October 2016. And in August of 2017 we named the Seagull Entourage Rustic CW QIT as the highest rated acoustic-electric guitar under $500.
Roger Fritz is a professional luthier who makes guitars and basses for musicians like George Harrison and Randy Jackson. Roger is also a bass player who fell in love with the old Kay 1950's bass after having a friend recommend he play one. Roger, who had worked for Gibson in Nashville on their Bluegrass instruments, created his own company, Fritz Brothers Guitars in Alabama is making custom hand-made instruments for professional players worldwide. Roger was so enamored with the sound of the Kay (K162V) Pro Bass that he developed a clone and made them available for sale under the Fritz name. Roger Fritz was the missing link that was needed to make the project a reality: a Luthier that had a love for the instruments to be produced. Roger joined our team in early 2007 to help create and develop all the parts and features that made the Kay products different from all the rest. Most of the parts and molds were no longer available so everything had to be created from scratch. The pickguards, the knobs, the hand wound pickups, the tailpiece, and even the baseball bat style toggle switch cover all had to be manufactured using original parts as templates for the new reissued versions. Finding the parts was difficult and surprisingly expensive since we needed to search stores, eBay and contact collectors to find perfect originals to reproduce. The going price for a good vintage Jazz Special Bass today is $7,000. But after finding the parts and vintage instruments from avid collectors like Gary Walko, Vintage Kay historians like Michael Wright and Jay Scott, and dozens of avid fans, the project was able to take form.
1. (n.) A sweet or agreeable succession of sounds.2. (n.) A rhythmical succession of single tones, ranging for the most part within a given key, and so related together as to form a musical whole, having the unity of what is technically called a musical thought, at once pleasing to the ear and characteristic in expression.3. (n.) The air or tune of a musical piece.
While styles and models may vary, electric guitars operate on the same general principles. The pickup mounted on the electric guitar’s body functions as a magnetic field. When a metal string is plucked and vibrates, it generates a current. That current is transmitted by the pickup through a preamp circuit with tone controls to the guitar cable, and in turn to the amplifier. The amplifier boosts the signal and modifies it with various tone controls and effects, depending on the amplifier's design and capabilities. The signal is then output to a speaker, which converts it to sound waves. The type of pickup(s), tone controls, strings, playing techniques, and other factors built into the guitar's design all influence the signal that is sent to the amplifier. In short, each component of the guitar affects how the guitar sounds.
When you're learning your instrument, having Books, Sheet Music & Media on hand is absolutely invaluable. It doesn't matter if you're a first time player or an old pro, this type of literature is going to help you to enhance your skills and become a better player overall. Think of having books, sheet music & media at your disposal like having the world's most diverse roster of teachers at your disposal 24 hours a day, seven days a week. By being able to learn on your own schedule, you'll find yourself playing new chords, progressions and songs in no time. So which books, sheet music & media are right for you? Well, as you can imagine, that's just going to be a matter of skill level and personal preference. If you're looking for a serious method book that will give you a solid basis in guitar technique, be sure to check out the Hal Leonard Guitar Method Complete Edition. This book and CD combo is designed to help anyone learn to play their acoustic or electric guitar. With convenient teaching ideas and fantastic audio assistance from Greg Koch, this set will help you cover all of your bases.
PRS, for short, was started in 1985 as a true bootstrap brand and passion project of its namesake, Mr. Paul Reed Smith. Initially designing and building everything himself, Paul garnered his first following and retail purchases by selling guitars out of the back of his car. Over time, the business grew into what it is today: one of the world’s premier guitar manufacturing brands. Now headquartered in Stevensville, Maryland, PRS is a brand that is still as dedicated to their craft as they ever were. And with musician’s like Carlos Santana, Dave Navarro, Daryl Hall of Hall and Oats, and Orianthi Panagaris (the female guitarist from Michael Jackson’s final tour) backing them, it’s hard to make an argument against the brand or their instruments.
I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.
SOLD OUT ! We are VERY pleased to present a very special example Alvarez Yairi Classical guitar . The condition of this high end instrument is excellent plus and this guitar is simply wonderful. This is hand built example by The Kazou Yairi himself, Japanese Master Luthier. For those of you not familiar with the Premier Japanese Master Luthier Kazou Yairi and his masterfuly built instruments you may enjoy this vidio introduction to YAIRI GUITARS http://www.youtube.com/watch?v=NPRyLPouYZM The model is CY116 and is a very high-end professional guitar and is in excellent Plus condition. Only the highest grade woods used as you can see ...choice AAA Flamed-Quilted and is 3-dimensional depth is a work of art as you can see by the pictures. This guitar plays and sound AMAZING and is truly inspirational. This guitar shows very little fret wear. There are just a few minor nicks or scratches which is normal wear for a guitar of this vintage that has been lovingly played. This one is a one owner adult owned guitar and comes with its high quality custom hard shell case too. General Specs: Alvarez Yairi CY116 Classical Acoustic Guitar The CY116's Solid Cedar Top is adorned by an elaborate wooden mosaic rosette. Burled Maple Back/Sides give this classical amazing clarity and warmth like the fiery Andalusian plains that inspired the music that this guitar was born to perform. With room-filling projection, the CY116 is a guaranteed conversation starter. You hear it in the elegant pacing of a classical air. You see it in the vivid charm of a folk dance. Specs: Burled Mahogany Back/Sides Solid Cedar Top Mahogany Neck Ebony Fingerboard Scale: 25 1/2" (650mm) Width at Nut: 2" (51mm) Rosewood Bridge Ivory Body Binding Wooden Mosaic Rosette Gold Vintage Open-Style Tuning Machines .
I have a question you might be able to help me with. I currently have a Yamaha silent guitar both nylon and steel and want to set up a home speaker system for a small room. I use a couple of pedals with my guitar. (reverb & delay) and at present use a Yamaha THR amp for sound. This is great for practice but does not fill the room so to speak. I have a larger acoustic amp but not happy with the sound. Can I use a pair of studio monitor speakers instead and if so would I need anything else e.g. (EQ or amp)I am looking to recreate the best possible sound I can get. At present it is only through my headphones. Any help or advice with this would be greatly appreciated.
A favored brand of a number of against-the-grain musicians – like Jack White of The White Stripes, Dan Auerbach of The Black Keys, and the late great David Bowie – Eastwood is unique in that, alongside their catalog of more traditional guitars, they’ve also taken it upon themselves to bring back a number of more obscure models through the revived Airline brand. For instance, the ’59 Custom 2P pictured above was originally offered by VALCO in a catalog sale through Montgomery Ward from 1958 to 1968. Their vintage style instruments are updated with modern manufacturing techniques, giving players the opportunity to pick up rare offerings at a reasonable cost. But perhaps the coolest thing about this company is their custom shop. Set up almost like a Kickstarter, the shop allows customers to bid on defunct, new, and bizarre guitars and go on to build whichever models meet their funding requirements.
Now think about all the advances in guitar technology that we’ve witnessed over the decades—how much smarter we are now when it comes to acoustics, electronics and precision manufacturing? Sticking with this metaphor, isn’t it a bit crazy that we place such high value on the early designs that represent the Model T-era of the electric guitar’s evolution? We’re not just talking nostalgia and historic significance here—ask most guitarists to name the most amazing, best-sounding electric guitars ever made, and they’ll go all the way back to early-fifties Broadcasters, late-fifties Les Pauls, and early-sixties Stratocasters. Guitarists cling to the tones produced by what is, essentially, first generation technology.
SOLD OUT: This guitar is very familiar to me as I have had other guitars from another Famous Japanese guitar maker That was known to make this very guitar already I believe this to have been made by those responsible for the Takamine or Mountain ands Tak made for Washburn import, needless to say this is a high quality Well built Japanese copy of the Martin D-19 and is Identical to the Takamine F320. This example was well crafted over 32 years ago making this a true vintage guitar based on the classic These were quite well constructed by any standard fit and finish is excellent typical of this era Japanese crafted and were made with very nice woods too... The top on this guitar is Solid Spruce and is nicely figured and the back sides and neck are all Mahogany, The fingerboard = bridge & head-stock front overlay is rosewood. This combination is know for some sweet mellow tone & good volume...this example is in above average vintage condition its finish still shines like glass and with only a few minor doinks and with its true 32+ years of well taken care of age its natural patina is very nice in deed. This guitar has the 1-11/16ths nut width it’s a comfortable medium profile neck and it plays with ease and has good action, neck is straight with correct relief and frets are still good at 88%. Tuners are original and are working well, no splits or cracks warps or twists or issues of that nature structural integrity is excellent. Volume is very good, tone is sweet, this makes for a very good playing guitar That sounds great and is very enjoyable all round for the player. Vintage tone! .. thanks for your interest if wanted you can contact Joe at email@example.com . .
This is because you won’t have to go through all the hassle of doing research on pickups, then finding a way to mount them without damaging your guitar. While magnetic pickups are surely quite easy to install, contact pickups or blended systems with microphones and preamps might require removing the top, drilling, using all sorts of screws and plates, etc.
Treble is really a form of gain boost that must be considered while gain-staging our signal path. With good tone, a note should ring like a bell, not slaughter like a machete, and that is accomplished by shaving some attack off the waveform and rounding off the frequency response. A bit off rollback on the tone knob takes you into the ballpark, along with your amp settings (I have a dedicated treble-cut on my AC30 that is necessary to tame my telecaster). Once I am in the ballpark, I use the volume knob to fine tune, and personally I tend to let it be from there, relying on a gain-boost pedal to lift my sound when necessary without altering the tone.
THIS DELUXE PACKAGE INCLUDES - GIBSON'S LEARN AND MASTER GUITAR PACKAGE - PLUS 10 ADDITIONAL WORKSHOP DVDs. THIS IS THE MOST COMPLETE INSTRUCTIONAL GUITAR PACKAGE YOU CAN BUY. Winner of the Acoustic Guitar Magazine Players' Choice Award, two Telly Awards and an AEGIS Award for Excellence in Education, Learn and Master Guitar is widely recognized as the best home instruction course for learning guitar available anywhere. This deluxe package consists of 20 professionally produced DVDs, 5 Jam-Along CDs, a 100 page lesson book, and a free online student support site. It is the only instructional package you'll ever need on your journey toward mastery of the guitar.
The rest seems like a bit of an odd ball selection. It's the age old argument of technique over substance. BB King puts more into a small handful of notes than Malmsteen does in several hundred. One of the most musical guitar players to have graced the earth. In fact I think it was BB who stated that it's not the notes you put in but the notes you choose to leave out that count. Now that's music.
GUITAR BLEND/BALANCE POT, 500KA. Bourns dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. 1/4" knurled shaft diameter. Solder lugs. 3/8" bushing. Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body. (This pot will not work on Les Pauls, for example). 500K, Special MN taper used for balance/blend pots. Nut and washer included. Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
The guitar is just a small step on being a guitar player. Having a budget friendly guitar to practice and learn with is suitable enough at this stage. The key to success really depends on how you practice and dedicate yourself on learning how to play. As long as you have a decent sounding playable guitar to begin with and has the quality that can last you in years to come. You’ll be all set.
Ooooohhhhh.... I used the Firebird 12 for two weeks on sessions in 1973.... I STILL solo the tracks I used that on... it's the BEST BEST BEST BEST OF ALL TIME !!!!!!!! FOR ANYTHING !!!!..... in fact, as I remember, the octave strings were wound different than the way Ric does it (high-low) and that even added to the incredible sound.....wanna sell the Firebird 12?
The use of "full range, flat response" (FRFR) amplification systems by electric guitarists has received an extra impetus from modeling amplifiers. Before widespread availability of modeling, guitarists did not commonly plug electric guitars straight into PA systems or powered speakers, because most genres relied on the tonal coloration of a regular guitar amplifier setup—from the preamplifier, equalization filters, power amp, guitar speakers, and cabinet design. The FRFR approach assumes the tone is shaped by sound processors in the signal chain before the amplifier and speaker stage, so it strives to not add further coloration or dedicated combo-style amplifiers with a broad frequency range. Such processors can be traditional guitar effects, a modeling amplifier (without power amplifier), or a computer running tone-shaping software. Using a modeling amp or a multi effects pedal used with line level output, a guitarist can plug in the guitar into a flat response mic input or into a keyboard amplifier.
48-HOUR RISK FREE TRIAL PERIOD (Includes guitars, effect pedals; excludes speaker cabinets and amps). Returns for 100% refund will be issued if the customer expresses their desire to return the item by email, phone or Reverb Message, within 48-hours of receiving the product. If done so, Moore Guitars will issue a FedEx prepaid and insured shipping label via E-mail at our expense. We require that the item be return shipped within 24 hours of contacting Moore Guitars of your desire to return the item. If the item is not shipped within the 24 hour time period the you will be moved to the next tier of our return policy. This is our "try it out in your own jam room" return policy. Just FYI, this is not a "Gig it, and Return It" Opportunity. Items purchased during Official Sales Events are not eligible. See "After 48-Hours" for returns on these items. AFTER 48-HOURS Returns after 48 hours and up to 14 days may be authorized and a full refund will be issued for any item, for the purchase price. Moore Guitars will issue a FedEx prepaid and insured shipping label via E-mail. If your purchase originally qualified for free shipping, the actual shipping charges will be deducted from your refund, as will any/all return shipping charges. Returns occurring between 15 and 30 days will be exchanged for 100% toward a trade of equal or lesser value of in-store product, OR 85% of the purchase price less shipping to and from the customer. All returns for any reason and at any time must be cleared through a Moore Guitars Representative. No exceptions. Any damage due to shipping must be reported immediately upon receiving the item. If an item is damaged due to shipping, we will refund the purchase price and the shipping costs to ship the item back to Moore Guitars. All returned items must be complete, unregistered and in the original condition and packaging with all accessories and complete documentation (Owner's Manual, Warranty Card, quick start guides etc.) No returns on Special Orders, Pre-orders, Trades, Close-outs, or Blow-out items. Return requests on all non-domestic United States shipped items must be submitted via email or phone within 24 hours. A full refund will be issued less shipping costs to and from the buyer on any item once we have received it and inspected it. No refunds will be issued for non-domestic United States shipped items after the 24 hour window has closed. ALL RETURNS ARE SUBJECT TO AN INSPECTION BY A MOORE GUITARS REPRESENTATIVE AND A REFUND WILL ONLY BE ISSUED ONCE WE DEEM THE ITEM TO BE IN THE SAME CONDITION AS WHEN WE SHIPPED IT. Our return address is- Moore Music, 301 North Royal Avenue, Evansville, Indiana 47715 Thanks, The Crew at Moore Guitars
On electric guitars, you do a lot of plugging and unplugging of your cable, and these actions can eventually loosen the output jack, causing a crackling sound through the speaker. This crackling indicates a disconnected ground wire. To fix this problem, you first need to take off the jack plate or pick guard and locate the detached wire causing the problem.
I'm also retarded. And my father used to beat me with my decca.... Im also the ex-ceo for decca inc. Your guitars are worth mere pennies.... litterally, Deccas were originated in the late 60s for young children to pretend to be their idols.. Deccas were packaged in cereal boxes as ready-to-go kits.. you assembled them yourself... they are made from old left over popsicle sticks.. So Im glad to put your high hopes and sleepless nights of wondering whos going to come up to you and tell you your old guitar is rare and worth thousands... Because frankly it will just never happen..
Featuring a small scale neck, the Squier by Fender Mini Strat Electric Guitar comes with three single-coil electronic pickups, with solid and intuitive master volume and tone control. The neck of the guitar is made of C-shape maple wood design, whiles the rosewood fretboard holding the strings and containing dot markings is designed in a manner that makes it easy to strum.
PRS Guitars was founded in 1985 by Paul Reed Smith in Maryland, USA. They build high-end guitars, even if they also have a more affordable Asian range (the SE series). The most popular PRS endorser is Carlos Santana, but we could also count Dave Navarro and Al Di Meola among them. Santana's guitar is equipped with dual-coil pickups and a mahogany body with maple top. It looks a bit like a Les Paul with two cutaways. And the sound is closer to a Les Paul than to a Fender.
Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches (18.4 cm). Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars' compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.