Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.
Real quick, I'm assuming you're talking production quitars here, not boutique or full on custom rigs. In that arena, one stands above all others... Gibson. While I was working at strings and things I was shocked at the way guitars were coming in from the factories... Completely not at all set up, some appears to have barely bothers to install strings. It was up to us to set them up to a kennel we felt appropriate, and I'm talking good guitars here, including the brands I play. And then came Gibson. Out of the box they are set up as prefect as can be without being personalized their final fit and finish is unparalleled, I'm sure their final inspection are all former Marine drill instructors and in need of therapy and on top of the physical aspects, at the bitter end they get handed to a guitar player, and some damn good ones by the way, to see if they make muster in playability and tone. It was rare to have one come out of its shipping box that wasn't nearly perfectly tuned. Hats off gents they just don't do it like that anymore ya know. Anyhow, the best one is gonna wind up being the one you like the best at least until you get old like me and start to appreciate somebody find things the right way instead of the fast/more profitable/ whatever else way. A little pride in your work late forever, especially in a disposable society such as this one...
In terms of usage, it is quite similar to the mini Strat guitar we discussed earlier. It is a great choice for someone who just wants a cheap electric guitar for practice or someone who is an absolute beginner. Also, it is one of the best choices for five to fifteen years old kids wanting to learn guitar. It comes with small ¾ sized bodies and a 22.75inch of scale length. It has a c shaped fine maple neck with its 20fret fingerboard.
A few years ago I wanted a mini/parlor guitar. I tried a few, did not like what I heard in the Taylor line and I did not want another Larrivee. The irony of it is, I did buy a Taylor and now realize it was because it sounded like a Larrivee, bright and even. This is an anomaly Taylor, I know that now. I bought a Larrivee Parlor which is okay but I also have learned that I am not a parlor, mini fan. They, for the most part, do not deliver an even enough sound for me. I have played Lowden, Martin, Gibson, Guild, Olsen, Huss and Dalton. I recently played an Irvin guitar. Wow, what a beautiful line of guitars. I want one. It is my next guitar with its sustain, consistency, brilliance and ease of ...more
In 1959, with sales under pressure from the more powerful Fender Twin and from The Shadows, who requested amplifiers with more power, Vox produced what was essentially a double-powered AC15 and named it the AC30. The AC30, fitted with alnico magnet-equipped Celestion "blue" loudspeakers and later Vox's special "Top Boost" circuitry, and like the AC15 using valves (known in the US as tubes), helped to produce the sound of the British Invasion, being used by The Beatles, The Rolling Stones, The Kinks and the Yardbirds, among others. AC30s were later used by Brian May of Queen (who is known for having a wall of AC30s on stage), Paul Weller of The Jam (who also assembled a wall of AC30s), Rory Gallagher, The Edge of U2 and Radiohead guitarists Thom Yorke, Jonny Greenwood and Ed O'Brien. The Vox AC30 has been used by many other artists including Mark Knopfler, Hank Marvin who was instrumental in getting the AC30 made, Pete Townshend, Ritchie Blackmore, John Scofield, Snowy White, Will Sergeant, Tom Petty, The Echoes, Mike Campbell, Peter Buck, Justin Hayward, Tom DeLonge, Mike Nesmith, Peter Tork, Noel Gallagher, Matthew Bellamy, Omar Rodriguez-Lopez, Dustin Kensrue, Tame Impala, and many others.
You may wondering how these chord shapes has been constructed. For now, you just need to know that a chord is based on the notes of a simple scale, which has 7 notes, and you finish on the original note, one octave up, for a total of 8 notes. A basic Major chord is made up of the 1st note in the scale of whatever key you are playing in, also called the root note, the 3th note, and the 5th note. We’ll get into that later, when we talk more about scales.
Gibson: These guys have been making musical instruments for well over 100 years. Founded by Orville Gibson back in 1890 and not producing guitars at the time (and certainly not electrics because those hadn’t even been invented yet), Gibson has had plenty of time to cement itself as one of the leading guitar companies. They are one of the few to keep their main brand name as a prestige-only brand and applying a different brand name (Epiphone) to their imported, lesser-priced instruments. They invented the arch-top guitar and created some of the most iconic instruments in guitar-history. These includes their by far most famous model, the Les Paul. Other iconic models are the SG, Explorer, Flying V, ES-175 and the Firebird. The ES-175 was to become the first really popular electric guitar. This happened before solid body guitars had even been invented. To this day, the Gibson Les Paul remains one of the most desirable and expensive guitars in the world. In order to tap into various price-points, Gibson creates less expensive Les Paul models around the $1,000 range, like the very popular Les Paul Studio. The more expensive models such as the Les Paul Standard are up in the $2,500+ range. Finally, there are even more expensive models such as the Les Paul Custom in the vicinity of $3,000+. Off course, they also create some very special limited run guitars than can easily fetch close to the $10,000 mark. In line with the car analogy earlier: While not Italian, I’d be happy to call the $2,500+ Gibsons the Ferraris of the guitar industry.
Also called a “wah-wah pedal”, the wah was one of the earliest effects designed for guitar players and has remained popular ever since. Basically, a wah uses a pedal and filter to sweep the tonal range from bass to treble, creating a vocal like “wah” sound. Some players also use them as a tone control leaving the pedal set at different settings to get different tones.
Thanks for this explanation. I have built a few electric guitars, but they have been in the Gibson style with two humbuckers. I am now working on a guitar with an HSH configuration, so for starters, I needed to understand the basic 5 way switch, which if you just looked at it, it makes no sense. Now I see that the wipers of each pole are on the opposite end of each side.
Distortion became more popular from the mid-1960s, when The Kinks guitarist Dave Davies produced distortion effects by connecting the already distorted output of one amplifier into the input of another. Later, most guitar amps were provided with preamplifier distortion controls, and "fuzz boxes" and other effects units were engineered to safely and reliably produce these sounds. In the 2000s, overdrive and distortion has become an integral part of many styles of electric guitar playing, ranging from blues rock to heavy metal and hardcore punk.
Squier affinity series, looks and sounds great, Fender & Gibson had to start somewhere, so everyone wants to be a star & copy, but everybody's hands and minds are different, don't need to be a star or copy cat to make a name, if the guitar feels good and sounds good, so be it. Be the First, off-brand- (Star),,,,, take the cheap version to new and higher heights,
The Blueridge BR-160 Historic Series dreadnought features classic vintage styling with modern improvements. For its Historic Series, Blueridge took inspiration from guitars made before the Second World War. However, instead of using the rarer and restricted woods such as Brazilian rosewood used in vintage guitars, Blueridge opted to use more abundant tonewoods that produce the same sound quality.
Steel-string Acoustic Guitar The steel-string acoustic guitar is a modern form of guitar that descends from the classical guitar, but is strung with steel strings for a brighter, louder sound. The most common shape is the dreadnought (originally developed by C.F. Martin & Company), which incorporates a deep soundbox and a smaller and less pronounced upper bout, giving it a wedge-shaped appearance. Other popular body styles include the larger jumbo body shape, as well as the smaller auditorium (000) body style and even smaller grand concert (00) body style. Check out the Martin Ed Sheeran X Signature Acoustic Electric for a smaller body type with a punchy sound.
Thanks for popping in! Yeah, that g-string issue's a real pain. I also get it on acoustics for the same reason. I've found that, aside from sloping the slot DOWN on the peghead side, if you also try to provide a gentle (side) edge where it starts to head towards the g tuner, that helps too. What I'm trying to say is that you should try to give as clear a path as possible to the tuner to reduce interference/friction. I've tried to illustrate what I mean here: https://lh3.googleusercontent.com/-_9c955WEOiM/UI8xvC_nvFI/AAAAAAAADAA/RQmXf_beWUc/s754/nut-slots.jpg but let me know if it's not clear. More on making a nut here, by the way: http://diystrat.blogspot.tw/2010/10/making-bone-nut-from-scratch.html
Once The Beatles became tied to Vox amplifiers (a deal was struck early in their recording career whereby they would be provided Vox equipment for exclusive stage use), the quest for more power began. John Lennon's first Vox was a fawn-coloured twin-speaker AC15, while George Harrison's was a fawn AC30 with a top boost unit installed in the rear panel. They were later provided with twin black-covered AC30s with the rear panel top boost units. Paul McCartney was provided with one of the first transistorised amplifiers, the infamous T60, which featured an unusual separate cabinet outfitted with a 12" and a 15" speaker. The T60 head had a tendency to overheat, and McCartney's was no exception, so he was then provided with an AC30 head which powered the T60's separate speaker cabinet.
The Epiphone brand scores another spot in this list with the Hummingbird Pro, a stylized take on the popular dreadnought shape. This guitar is the affordable version of the original Gibson Hummingbird, as seen in the hands of big name artists like Keith Richards, Noel Gallagher, Sheryl Crow and many more. It is a modern and more cost effective take on the guitar that Keith used on many of The Rolling Stones' popular tracks, including "Play with Fire" and "Satisfaction".
Some pedals, such as clean boost pedals and transparent overdrive pedals merely provide a much powerful signal to feed into the preamp section of the amp, causing natural overdrive. Overdrive pedals can provide both a boosted signal and an already distorted signal. Distortion pedals have different kinds of circuits that provide different kinds of distortion; the pedal provides an already distorted signal. Digital overdrives and distortions rely on electronic means of producing the signals, with some resorting to modeled sounds.
Here we have e very nice example of a great sounding and beautiful Vintage Martin D28 style copy acoustic guitars made by the master luthiers at Yamaha Japan Nippon Gakki. This is a high quality example folks not to be confused with the Taiwan China made versions.. this is the top of the line made famous from the last 1960's... The workmanship is excellent as is the woods chose he fit & finish is still 90% or better which translates to very good to excellent used vintage condition all-round .. The guitar plays with ease and has been upgraded here at JVG with a bone nut & saddle and a new set of Martin strings for its new owner who is going to love this classic no nonsense full sounding Boomer!... Here is a link to more pics of this fine Japanese crafted Yamaha: https://picasaweb.google.com/gr8bids/80sYamahaFG200TanLable4?authkey=Gv1sRgCO-azJ2orZPeLw#slideshow/5617864934522537362.
I always recommend the Cordoba C5 for beginners who are looking for their first classical or nylon string guitar. It’s comes at a very wallet-friendly price, but it sounds and plays exceptionally well for a guitar in its price range. More experienced players can look to other C-Series Cordoba guitars like the C12, which is built for advanced guitarists.
You will agree with us that the journey to the Canaan land of guitar mastery isn’t always one with bed of roses. Rather, it seem very daunting, especially with so many different types, styles, shapes and sizes in the marketplace—all craving for the bulging eyes of your wallet. But as with anything, the options before you can become clearer if only you can endeavour to filter out the unwanted options—that is, those that aren’t compatible with your immediate needs.
Body: Soundboard: two-piece spruce: medium grain broadening toward the flanks. Back: two-piece spruce: fine grain on bass side broadening to medium at the flank, wide grain on treble side; slightly arched; two f-holes; recessed 11 mm from edge of ribs. Ribs: 7-ply plywood, the outer layer birch, the inner layers mahogany, the outer veneer layer grain running perpendicular to plane of top and back; panel on bass side with nickel-plated steel plug; slides out for access to pickup unit. Head: mahogany veneered with white celluloid on both faces. Neck: mahogany; integral with head; rosewood stripe.
By the early ’80s, MTI was importing Westone guitars from Matsumoku, which had made its earlier Univox guitars (and the competitive Westbury guitars offered by Unicord). Wes-tone guitars continued to be distributed by MTI until ’84, when St. Louis Music, now a partner in the Matsumoku operation, took over the brand name and phased out its older Electra brand (also made by Matsumoku) in favor of Electra-Westone and then Westone. But that’s another story…
: : I have a Vox Shadow that's sunburst, white pick guard that surrounds 3 solid chrome face pickups and the middle pick up has "VOX" engraved in it. 3 seperate volume controls and a master volume control. Tuning keys are all chrome, and the green decal on the face of the headstock reads Shadow, JMI Dartford, Kent. Neck is attached withthe help of a chrome plate, on the back side of the 'plank' body is an access plate for the jack that states made in England. Guitar also has the original roller/tremelo tail piece with palm lever. The numbers of 64728 are stamped on the back side of the headstock just below the tuning keys. Finish is beginning to crack a bit but it's all original, right down to the volume pots that have to be cleaned from time to time. It must be a rather unknown line that Vox had as I can't find out much on it either. Had this guitar for many years. Was handed to me in pieces in an old 'cardboard' case, (that has since gone away) put it back together and added it to my "music room".
A frequency is determined normally by the position of a foot pedal. The input signal is boosted at, and around, this frequency, above the rest of the signal. As you move the pedal, the frequency being amplified changes up or down. The frequency range is set so that it sits well with a guitar, which in turn isn't hugely dissimilar to the human voice's frequency range.
Epiphone returns with yet another Solid and high-quality Les Paul Standard electric guitar, this time, an ebony styled-version of the Les Paul series. The body of this ebony version is made of solid and durable mahogany wood construction, including a maple top design. The fretboard of this Epiphone Ebony version electric guitar is made of rosewood, containing 24.75 scales.
Place one mic on each speaker at the same distance and orientation, and check the pair for phase cancellation by panning them to the same spot and listening in mono. The minute differences between the speakers, mics, and mic positions, combined with double-tracking, creates a monstrous presence when the tracks are hard-panned in the mix, and opens up a world of possibilities for separate EQ and effects processing. If you don't need the guitar to dominate the mix, you also can sum these mono-compatible tracks together to a single pan position for a noticeably bigger sound.
The fretboard wood is used for the part where the frets are installed (front of the neck, where you press on the strings). All our fretboards are built from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
What? I have an early 90s pe and I've recorded with it and its one of the best guitars I've ever played. Beutifull clean lp tone and ballsy as when you dirty it up. I also have a pro 2 fullarton which with the fender lace sensor pups I put in it, plays and sounds as good as any strat I've played in thirty years. Check the new arias comming out of the states at the moment and they are really awesome looking guitars. There is also a reason the early ones are known as lawsuit guitars as Gibson though they were so good they had to sue them!
After reading through Teach Yourself to Play Guitar, my opinion is that if you are giving a guitar as a gift to someone, this might be an OK book to accompany that. If you wanted to spend a bit more, or are looking for a book for yourself, I would go with the 2nd book reviewed below, the Guitar for Dummies book. It has online video and audio demos, and hearing what you should be playing helps when learning music... 😉
Whether he was playing as a Muscle Shoals studio musician or as one of the lead guitarists in The Allman Brothers Band, Duane Allman was brilliant. Both his standard playing and slide playing were some of the smoothest and most adventurous the world has ever seen. To hear Allman at the height of his guitar playing prowess, give a listen to “The Allman Brothers Live at The Fillmore East.”
Chords are the heart and soul of playing guitar. Many guitar players seldom do anything else, other than strumming chords. The chord is the basic building block of guitar music. A chord is simply a combination of two of more notes played simultaneously. Different combinations give you different chords. There are different classes of chords, such as Major Chords, Minor Chords, Triads, Suspended Chords, Diminished Chords, etc...
If you prefer to pay monthly you can get started with $19.95. To take advantage of this offer follow the link below and key in your email address. I suggest that you wait until you receive an email from Guitar Tricks. You should get a username and a password. Use these details to logon to the site. Once you are inside of Guitar Tricks select the Upgrade button and choose the Monthly Membership option.
It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.
Tempo Delay: Most plug-in and hardware delays now allow you to automatically sync delay times to MIDI clock and then specify the interval of the repeats in terms of note values rather than milliseconds. A trick here is to use two simultaneous tempo-based delays with, say, a triplet delay setting, panned hard left, and a straight-note delay panned hard right. Things can get more interesting still if you apply this technique using ping-pong delays, so that alternate repeats bounce from one side of the stereo spectrum to the other. To create a true 3D effect, play around with the amount of original signal left in the middle. Depending on the intervals between your repeats, you can turn simple guitar and synth lines into complex, arpeggiator-like patterns or totally spaced out ambient pieces. Stephen Bennett
I do all my recording through my Axe FX, though there are many ways to USB record to computer. That being said, I plan to play live using my Ax and my other FRFR gear. I’m using a Matrix 1600-watt amp and a Matrix 2×12 (FRFR) cab and will run direct-out to PA when the time comes. I see no reason to lug around a half-stack or stack let alone the consistency and versatility of this setup. This is my first time using FRFR, and was tempted to go with a hi-end head and cabinet combo, but the up front investment will be worth it. I won’t ever have to buy effects pedals or change heads when I want a different sound. I did add a Mission SP-2 expression/volume pedal and also use my old Pod X3 Live for a midi controller. As for volume, I’m confident that my setup will hold its own vs. most other half-stack setups. I may add an Atomic CLR or another Matrix 2×12 (like the one I have) for a monitor later on. Another important factor is my band does cover songs and the Axe setup allows me to tailor my tone to match the bands we cover at the click of a switch. As a guitarist and computer tech/nerd, it doesn’t get any better than this for me. The configuration possibilities are endless.
Beyond shaping and body design, there are a number of characteristics that distinguish the Gibson Les Paul line from other electric guitars. For example, in a fashion similar to Gibson’s hollow-body instruments, the strings of Les Paul guitars are always mounted on the top of the guitar body, rather than through the guitar body, as seen in competitor Fender’s designs. The Gibson also features a variety of colors, such as Wine Red, Ebony, Classic White, Fire Burst, and Alpine White. In addition, the Les Paul models offered a variety of finishes and decorative levels, a diversity of hardware options, and an innovative array of electric pick-up options, some of which significantly impacted the sound of electric music. For instance, in 1957, Gibson introduced the humbucker (PAF), which revolutionized the sound of the electric guitar, and eliminated the mains hum, which had previously plagued guitars with single coilmagnetic pickups.
I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!
We recommend you choose the headstock shape that appeals to you most. The shape of the headstock does not significantly affect the sound or performance of the instrument. Some of our headstock shapes are pointier, which means they can get damaged more easily when dropped or bumped. Choose from our existing shapes, or, send us a drawing of your original design - we can build that, too!
In my own (first) project guitar, I did not know quite what to expect, so I built it with HSH pickups and two complete signal paths. The humbucking path uses 500k pots and an 0.047 cap; the single coil path uses 250K pots and a 0.022 cap. I did this with stacked, concentric CTS 250K/500K pots and an on/on toggle switch, all within the minimal confines of a standard Telecaster control plate. I created a custom 5-way selector switch to isolate the single-coil wiring from the humbucking combinations, but in the end when I flip the switch I opted for just the stand-alone single coil for the warmest sound. As I said above, the tapped humbuckers just didn't compare. This project is a work in progress; I hope this helps you find your own path.
At the higher end of the market, you will definitely want to consider theGibson Memphis ES Les Paul Studio. A stunning marriage of the ES hollowbody and Les Paul solidbody shapes, this is a model that combines playability, power, sustain and tonal warmth to perfection. Equipped with ’57 Classic and Super ’57 Classic pickups and boasting solid construction throughout, the ES-Les Paul Studio is perfect for anything and everything you could imagine. Each model is supplied with a Gibson Memphis hardshell case to get you out and about in style.
While Ujam has only been in business since 2010, their members aren’t new to VSTs or even guitar VSTs for that matter. In 2002, Steinberg released Virtual Guitarist, developed by Wizoo, and this was one of the first VSTs that brought credibility to guitar VIs. It just so happens that the man that founded Wizoo, Peter Gorgers, founded Ujam and brought along many of the members, ensuring the same level of detail.
The simplicity and ergonomic design of the Pacifica PA012 body mirrors that of the PAC112. It is also available in exciting colors to match it perfectly to the player preference. Tonewood for PA012 as specified on the Yamaha catalog can either be in alder, nato or agathis, while the PAC112 is only made in alder wood. Neck for both guitars are made in maple with a satin finish then it is overlaid by a 22 medium frets rosewood fingerboard marked by inlay dots.
When looking at acoustic pianos, there are so many variations that can lead to differences in tone: upright vs. grand, hammer types, mechanical condition, the player, mic choices, and mic techniques. No matter what, though, the piano tends to be a behemoth in the mix – for better or worse – so most often you'll be looking to cut holes out for other things in your mix.
Free to use schematics to get started can be had from the web but remember, if you are going to use someone else’s work, either completely or as a starting point for your own design, check first to see what copyright and any other terms are associated with it. If it’s not clear, ask first. There are plenty of open source designs available to use, but schematics, like other written works are covered by copyright law so check you have permission before using them.
Despite the fact that there are many great beginner guitars out there, Ibanez holds the title of owning starters designed specifically for metal. The way they have achieved this reputation is quite ingenious. They have delivered the same body style shared with their higher-end models. Ibanez GRX20ZBKN is a good example. It is a basicguitar that packs a mean punch.
Some solid-bodied guitars, such as the Gibson Les Paul Supreme, the PRS Singlecut or the Fender Telecaster Thinline, among others, are built with hollows in the body. These hollows are designed specifically not to interfere with the critical bridge and string anchor point on the solid body. The motivation for this can be to reduce weight, to achieve a semi-hollow tone, or both.