The acoustic guitar is one of the most popular instruments around. It’s versatile, low maintenance and sounds great. You don’t need to lug around an amp if you’re just playing for a few friends and it provides enough volume to accompany vocals but not so much that it overshadows them. I personally love playing acoustic guitar. Everything from the sound to the feel of playing a nice acoustic is satisfying. What’s even more satisfying is learning how to play some great acoustic guitar songs. There are so many amazing acoustic guitar songs out there that it’s hard to narrow down
Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.
But alongside Davy Graham and Jim Hall, the other musician I really wanted to remind you about was Martin Taylor. Astonishing technique – enough to make the shredders weep with envy, coupled with an exquisite feel for melodic line. Martin is one of the few guys (or gals) whose playing brings tears to my eyes regularly. When one of his albums gets into my CD player it stays there for weeks. In many ways, a natural successor to Django Reinhardt, truly a master of music as well as the guitar art and DR’s principal competitor for a top ten place in my list.
The book provides examples of simple mathematical models for the complete signal chain consisting of the electric guitar and related accessories. Several do-it-yourself books have been written with the emphasis only on building a pre-specified circuit according to step-by-step instructions. This book takes one step further and brings up the designer perspective on guitar electronics. The importance of mathematics as a tool for design and analysis is emphasised throughout the text. Often in similar publications the use of mathematics is avoided as much as possible, but the fact is that mathematics provides ways to analyse circuits before spending time and money on random prototype builds. For more information on the contents of the book, check out the table of contents and the Google Books preview 

Epiphone does a great job of making instruments for all levels of guitar players, especially those looking for affordable acoustic and electric instruments. Epiphone is owned by Gibson, and therefore can make official copies of Gibson guitars like the Les Paul, SG and Hummingbird. Many are good enough for pro players to use in the studio or onstage.
Our guide to guitar strings, the hope and savior of beginners across the world. We're going to cover the types of guitar strings, how they're made, the best brands, the standard gauges, how to pick the right ones for your instrument and style, what to expect in terms of cost, and much more. Take a ride with me through Ledger Note's guitar string guide...
While this seems like you’d be stuck on either extreme of the guitar industry, don’t panic. There is a compromise between the two. You can get a guitar with a solid top and laminate back and sides like the LX1E Little Martin Acoustic Electric Travel Guitar. Martin shows you that guitars with this construction tonewood combo doesn’t always mean it’s going to be a poorly-made guitar. However, it does provide enough jump up in quality to improve sound performance while still keeping costs within the affordable range.
Ampeg was swallowed up by Japanese electrical giant Magnavox in 1971, when they wanted to get in on the electric guitar copy craze of the 1970s. Magnavox produced electric and bass guitars under the Stud badge as well as the successful Ampeg brand. It's been suggested that Magnavox was also responsible for producing Selmer acoustic guitar badges during this time, but that has not been verified. Selmer was sold to Magnavox around the same time they bought Ampeg, so it certainly seems plausible they could have made Selmer acoustic badged guitars as an offering for that market. Stud badged guitars were made until '75, with Ampeg guitar production continuing until 1980. Opus was another badge made by the company. Magnavox lost their interest in Ampeg shortly thereafter and the brand languished until it was resurrected over a decade later by another American company.
Beginners face this very common problem when they go for the cheaper options. The strings are usually far from the fret board, and due to lack of knowledge, many think that this is how it was meant to be. Such a guitar brings pain to the fingers since force has to be applied to lower the string to the fret board so as to produce sound. All these difficulties make it very hard for a beginner to learn the guitar. For you to learn the guitar quickly and without problems, you should get a guitar whose distance from string to fret is less.
In the 1960s Japanese guitar makers started to mainly copy American guitar designs and Ibanez branded copies of Gibson, Fender and Rickenbacker models started to appear. This resulted in the so called Ibanez lawsuit period. After the lawsuit period Hoshino Gakki introduced Ibanez models that were not copies of the Gibson or Fender designs such as the Iceman and Roadster. The company has produced its own guitar designs ever since. The late 1980s and early 1990s were an important period for the Ibanez brand. Hoshino Gakki's relationship with Frank Zappa's former guitarist Steve Vai resulted in the introduction of the Ibanez JEM and the Ibanez Universe models and after the earlier successes of the Roadster and Iceman models in the late 1970s/early 1980s, Hoshino Gakki entered the superstrat market with the RG series which were a lower priced version of the Ibanez JEM model.
There is no way to indicate strumming patterns or the duration of notes. Take our examples above. If you know these two songs, you can quickly figure out how to play these passages. But imagine that you don't know them. How long do you hold the C chord at the beginning of Silent Night? How long do you play the notes for Day Tripper? The only indication in Silent Night is the inclusion of lyrics. For Day Tripper, the distance between the numbers gives you minimal information about note duration, but you could never reproduce the riff if you didn't hear someone else play it.
On the way folks arriving soon stay tuned pics of this made in Japan hand crafted beautiful Exotic Vintage Martin copy will be uploaded soon ... in great players condition original and stock Takamine pickup installed you can plug in at the strap pin jack and go electric and sounds amazing or fully acoustic of course unpluged. You know theses are know for the ultimate beauty of them as well as the Rich complex tone they offer well seasoned instrument of this caliber Japan had to offer in the Lawsuit series days 70-85 or so that have been discontinued decades ago as they say they don't make um like this any more... Stay tuned for another exotic Brazilian Rosewood guitar at any questions for Joe email:

Guild acoustic guitars are played by some of the best professional musicians in the business. From this standpoint, Guild is on par with Martin and Taylor, and completes the triumvirate of American acoustic guitar titans. As you’d expect, the prices follow suit. However, the GAD series offers a way for intermediate players to get a Guild acoustic for a reasonable price.

The Gibson ES-335 certainly had an alluring appeal in the mid 1900’s, and it’s easy to see why. With a beautiful Arched top, lovely smooth curves and a tone that can knock your socks off, and a beautiful white binding, these truly are beautiful guitars. Whether you want to play some classic blues, or dip into some catchy jazz, this guitar is sure to impress.
If you know how to play an E major chord, then you know how to play an A minor chord—just move the chord whole shape over a string. Make sure your first finger is curled, so the open first string rings clearly. Avoid playing the open sixth string when strumming the A minor chord. There are situations when it makes sense to reverse your second and third fingers when playing the A minor chord.
Many pedal builders will order their resistors, capacitors, IC, and other components in bulk online. Most of the time, this is a much cheaper method than buying single components – plus it gives you an enormous variety of components to use. It may also be wise to check out the circuit boards inside of any old electronics, or broken guitar pedals you no longer use. You’d be surprised what you may find.
@NeilMeyer I used to believe that as well until I started noticing songs that used the flatted 7th degree chord instead. It's generally easier to play those major chords for a beginner than diminished chords. Since the answer is provided for beginning students, I presented the easier approach. Notice the chart also leaves out some major keys which feature more difficult to play chords. Keeping it simple for newbies. Tim referenced this ( – Rockin Cowboy Jan 18 '16 at 17:26
The Venue DI is essentially an amplifier without a speaker cab. If you go straight into a mixer or PA system this unit lets you customize your acoustic's tone in every way imaginable. While it's particularly ideal for someone who doesn't have an existing preamp in their acoustic rig, it outperforms most preamps that come standard in an acoustic guitar or even in an acoustic amp.

The fact that his guitar playing is as relevant today and is still loved by generations (even those who weren’t even born at the height of his success!) is proof that Eric Clapton is a guitar hero in many people’s eyes. Who can forget him singing, with just his string guitar, about his late son in ‘If I Saw You In Heaven’. The overwhelming emotion is enough to send shivers down your spine.

If any item fails to meet your expectations at any time, please return it for a refund or exchange. From tuners to endpins, everything we sell at Stewart-MacDonald is backed by our rock-solid guarantee of satisfaction. This is how we do business, ever since selling our first 5-Star Banjo Head in 1968. We proudly continue this tradition by offering quality products and standing behind them.
This is a guitar that we’ve featured before as our top pick for those who are looking for an electric acoustic for less than $500, so there’s no surprise that it’s back as one of the very best prospects at any price at all. Epiphone might be Gibson’s more affordable brand, but that certainly doesn’t mean you aren’t getting very high quality when you choose the Dove Pro.

Now think about all the advances in guitar technology that we’ve witnessed over the decades—how much smarter we are now when it comes to acoustics, electronics and precision manufacturing? Sticking with this metaphor, isn’t it a bit crazy that we place such high value on the early designs that represent the Model T-era of the electric guitar’s evolution? We’re not just talking nostalgia and historic significance here—ask most guitarists to name the most amazing, best-sounding electric guitars ever made, and they’ll go all the way back to early-fifties Broadcasters, late-fifties Les Pauls, and early-sixties Stratocasters. Guitarists cling to the tones produced by what is, essentially, first generation technology.

We are proud to offer this very Rare and beautiful and highly collectible vintage 1983 Alvarez Electric/Acoustic 5078 with a les Paul style body shape. Top of the line workmanship fit & finish work here Crafted in Japan this is the limited special production Anniversary model made in 1983. This truly fine rare example comes with its nice original Alvarez black exterior tolex with the blue Martin style plush lined hard shell case. Did we say SUPER RARE....WoW!...we were completely amazed at the fact that this ( Les Paul style baby sounds so great plugged in or unplugged just beautiful. This one has a rich full bodied sound as an acoustic which is hard to find with this thin Les Paul shaped body makes it very comfortable to play long duration and not to mention did we say BEAUTIFUL as well as a real unique player...see the Headstock shape in the pictures this is truly a real beauty. This one is sure to please the Vintage Alvarez Acoustic lover... I'm a vitage Alvarez believer & after you see and play and hear this so will you. Condition for a 26 year old vintage guitar this thing is darn near mint with just a few tiny minute dings, see the detailed high res pictures for all the cosmetics, JVG RATED at 9.2 out of 10 ....... any questions? please email us @ Thanks for your interest! .

If you already have an electric guitar and you're looking for replacement strings, carry cases, guitar stands, or other accessories, you've come to the right place. offers a selection of tools and accessories designed for players of every age and skill level, from beginners to pros. Look for amplifiers, cables, and microphones too—you can enjoy great selection right here online, with no need to make a special trip to the guitar shop.
The top is made from spruce and features X-bracing, while the back and sides are made from basswood. The FA-100 also sports a very playable maple neck, with a rosewood fretboard and 20 frets. It would work very well for beginners, as it provides a defined, crisp sound that’s well suited to plucking or strumming, and good for everything from rock to country.
* 3 most basic reverb modes: Room: Simulates the spaciousness of a room; Hall: Simulates the spatial dimension of a music hall; Plate: Simulates the unique reverberation character only coming from a plate reverberator. * One reverb control balances the dry/wet signal, simple enough to dial in the perfect amount of reverb for your tonal needs. * True bypass for zero tonal coloration. * Extreme mini size for great compactness. * Heavy-duty metal casing for great stability and durability; Connectors include input, output, and power supply; Powered by 9v DC. W/ a 6 inch patch cable included. SONICAKE Digital Reverb is reverb pedal designed to add dimension and spaciousness to your tone. It is extremely straight-forward to use with only one “Reverb” knob to adjust the balance between the raw d.
bought at a tiny store in holland, back then they said to me the guiter was already 20 years old. he was looking a new, and bought it for 1000,- dutch guildens. thats maybe...445,- euro now. thats nothing compared to the prices they ask for a vox guitar they make TODAY! thay are building guitars again and ask pricies beginning by: 2000,- euro's. I wanna know when my guitar was bild, he has a chrome plate at the back with made by japan on it too.
The original run of Marshall Silver Jubilee amps were designed to celebrate Jim Marshall's 50th anniversary in music as well as 25 years of Marshall amps. These beautiful sounding (and highly sought after) amps have been brought back from extinction with the Marshall 2525H Mini Silver Jubilee Head, matching cab and combo and have been constructed using the original 2525 diagrams. This means you have all that vintage sounding goodness with modern reliability. You can even switch it from 20 Watt to 5 Watt power so you can go from live sound to home practice easily without ever losing your tone. A great amp for stage, home and studio recording.

{"id": "K47863", "categoryId":"site5ABA", "name":"California Redondo Player Acoustic-Electric Guitar", "pageUrl":"/Fender/California-Redondo-Player-Acoustic-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"399.99", "priceMin":"399.99", "priceMax":"399.99", "msrp":"400.01", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"392", "brand":"Fender", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMID,site5LAAB", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"352089750023", "priceVisibility": "1", "itemType": "New"}

Engineers invented the first loud, powerful amplifier and speaker systems for public address systems and movie theaters. These large PA systems and movie theatre sound systems were very large and very expensive, and so they could not be used by most touring musicians. After 1927, smaller, portable AC mains-powered PA systems that could be plugged into a regular wall socket "quickly became popular with musicians"; indeed, "...Leon McAuliffe (with Bob Wills) still used a carbon mic and a portable PA as late as 1935." During the late 1920s to mid-1930s, small portable PA systems and guitar combo amplifiers were fairly similar. These early amps had a "single volume control and one or two input jacks, field coil speakers" and thin wooden cabinets; remarkably, these early amps did not have tone controls or even an on-off switch.[1]
We can visualize the operation of a potentiometer from the drawing above. Imagine a resistive track connected from terminal 1 to 3 of the pot. Terminal 2 is connected to a wiper that sweeps along the resistive track when the potentiometer shaft is rotated from 0° to 300°. This changes the resistance from terminals 1 to 2 and 2 to 3 simultaneously, while the resistance from terminal 1 to 3 remains the same. As the resistance from terminal 1 to 2 increases, the resistance from terminal 2 to 3 decreases, and vice-versa.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Frets: 24, Jumbo - # of Strings: 6 - Headstock: 3+3 - Bridge: Floyd Rose Special Tremolo - Cutaway: Single - Hardware: Satin Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickup Configuration: H-H - String Instrument Finish: Transparent Amber Sunburst, Transparent Black, Transparent Red
If you have your heart set on a Stratocaster, but can’t justify shelling-out $600 or more for the USA-made Standard Strats, the Squier Standard Stratocaster is a great place to start. Unlike the even cheaper Strats that are included with Fender’s “starter packs,” this guitar is a definite step-up in quality and features a more modern take on their traditional bridge. I personally prefer this bridge style over Fender’s traditional/vintage 6-screw bridges.
I've been a guitar player for decades but only recently became serious about working on my instruments. In my research, I’ve found hundreds of articles about instrument repair, and while many are fantastic and chock full of information that’s invaluable to musicians, a lot is impractical or requires more space or specialized tools than most of us have. Plus, some repairs, such as fretwork, nut replacement, under-saddle pickup installation and finish repairs are best left to professionals.
We call these boxes “phase shifters” because they split the guitar signal and shift one path out of phase by from 0 to 360 degrees through the entire range of the frequency spectrum, and blend it back with the dry path so the moving in-phase/out-of-phase relationship can be heard. When the two signals are totally out of phase—at 180 degrees (or, technically, 540 degrees or 900 degrees, etc, because the shift keeps moving)—they cancel each other out, creating what we call a “notch”. But a number of factors interact to give a phaser its characteristic “swooshing” sound. I will explain them in relatively simple terms, but in many units some pretty clever and complex electronics going into making all this happen. When a notch in the frequency response is swept across the frequency spectrum, the most dramatic sonic effect occurs at the peaks between the notches, where both paths are completely in phase, and we have a full-strength signal. Leaving it there, however, would repeatedly emphasize the same low, middle and high-frequency notes—and delete the same notes at the notches—so the phaser circuit also employs an oscillator to continually move (or “shift”) the point at which these notches and peaks occur, so that different frequencies are emphasized and de-emphasized at each pass, at a rate determined by the unit’s “speed” or “rate” knob.
Two and one half steps down from Drop D. This tuning is most often used by death metal or deathcore musicians, such as Suicide Silence or Whitechapel (both use seven-string guitars and tune down the seventh string a full step). Utilized by bands like Nile, Motograter, Thrice, Filter (on the songs "Columind" and "The Missing" from The Amalgamut and "Drug Boy" and "The Trouble with Angels" from the album of the same name), Dead by April, RED, Ill Niño (on Dead New World) and occasionally Slipknot, Crowbar, Amon Amarth, Five Finger Death Punch, and Parkway Drive. Trapt uses this tuning on their songs "Hollow Man" and "Waiting".
Compared to the previously mentioned good guitar brands, ESP (Electric Sound Products) guitars are relative newcomers to the scene. The Japanese company was founded in the mid 1970’s, and they produce mostly electric guitars and basses. The company became very popular among metal guitar players, however they are versatile enough to be used for any style.
Shortly thereafter, the American instrumental rock band The Ventures asked their friend, session musician and electronics enthusiast Orville "Red" Rhodes for help recreating the Grady Martin "fuzz" sound.[18] Rhodes offered The Ventures a fuzzbox he had made, which they used to record "2000 Pound Bee" in 1962.[19] The best-known early commercial distortion circuit was the Maestro FZ-1 Fuzz-Tone, manufactured by Gibson, released in 1962.[20]
The Supro Spanish Guitar was a non-cutaway archtop built by Regal with electronic components supplied by National Dobro. Except for the fairly modern block-style Supro logo, this was pretty much a typical downscale pressed-top Regal archtop guitar, with a mildly rounded headstock, neck joining the body at the 14th fret, 20-fret rosewood fingerboard, five single-dot inlays, wooden adjustable compensated bridge and a simple trapeze tailpiece. The most distinctive feature was that the guitar had no f-holes. You’ll recall that the ’35 Dobro Electric Spanish was a “conventional” archtop, most likely with f-holes (a comparable National archtop also had f-holes in the beginning, but switched to the non-f-hole design in late ’36 or ’37, following the Supro pattern). The pickguard was typical Regal made of black Ebonoid plastic. In catalog illustrations this appears to have white trim around the edge, but this was apparently company “retouching” to make the pickguard stand out better in the pictures; real examples have plain black ‘guards. The oval, covered pickup sat on a wider oval surround which also held the single volume control. This pickup was nestled down near the bridge. The tuners were Harmony Tune-Rites, with polygonal pot metal buttons. The necks on National Dobro guitars which were entirely made by other manufacturers were glued in. Slightly later, when they began making their own necks and applying them to other bodies, National Dobro Spanish guitars had bolt-on necks.
And it took a long time because inevitably the tremolo would go out of time with the track because the tremolo doesn't stay in regular clock time. Also we would go out with each other's amps, so we had to keep looking up at each other after every fifteen second bursts and kind of fess up, "Oh yeah, mine kind of went out of time." It took long time, but I'm glad we did it that way because if we had cut and pasted two seconds of audio, it wouldn't have had the same dynamic quality throughout the six minutes of the song, or however long it is.
The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.

By the late 1970s, costs of manufacture in Japan had risen to such an extent that it was difficult to make student-grade guitars over there. It was far less expensive to manufacture instruments in Korea. Numerous factories were built, and existing facilities in Korea were expanded. Samick built a factory capable of producing one million instruments a year. Japanese companies invested heavily in Korea so that they would be able to produce their low-end models in Korea and high-end models under the same brand names in Japan. The early Korean-made instruments were not as good as the Japanese ones, but it did not take nearly as long for Korean quality to improve as it did for the Japanese to go from making crude low-end models to sophisticated instruments suitable for professional use. The Koreas had the benefit of all of the Japanese experience especially in the cases of factories with Japanese ownership or management.
The next step is to figure out what gauge, or thickness of string is best suited to your playing ability and style. Thinner gauges are easier to fret and bend, and may be better suited for beginners, until callouses build up on the fingertips. Heavier strings tend to produce greater volume and fuller tone. Nylon strings are typically categorized as light, medium or heavy tension. Steel strings for both electric and acoustic guitars are categorized by the gauge, or thickness of the lightest string, the high E string, measured in thousandths of an inch, with .09 being a common size for an electric set. A set of electric strings may be labeled .09-.042 - this is the gauge of the lightest and heaviest string in the set. Acoustic sets are a little thicker, so a typical medium-gauge set might be .012-.054.
While the combination of guitar, amp, effects and technique all play a crucial role in achieving the desired tone, it’s important to choose the right guitar for the job in the first place. There’s a reason why Stratocasters, Teles, Les Pauls and ES-335s have featured on so many classic recordings over the years; it’s because they are as reliable as they are versatile. That said, don’t be afraid to try guitars fitted with more esoteric pickups, such as Gold Foils, for a less generic sound.   P-90s are another great studio weapon; less dense than humbuckers, they can provide plenty of rhythm raunch without crowding the mix.
Bass chorus effects use a cycling, variable delay time that is short so that individual repetitions are not heard. The result is a thick, "swirling" sound that suggests multiple instruments playing in unison (chorus) that are slightly out of tune. Bass chorus effects were more common in the late 1980s, when manufacturers such as Peavey included chorus effects in its bass amplifiers. In the 1990s and 2000s, more sophisticated bass chorus effects devices were created which only apply the swirling chorus effect to the higher parts of the bass tone, leaving the instrument's low fundamental untouched.[5]

An expander is the opposite of a compressor. It stretches out the dynamic range of your signal allowing the quietest sounds to be even quieter and the loudest sounds to be louder. This can be useful in situations where you want quieter noises—such as squeaky fingering sounds—to become inaudible in the mix where they don't attract attention, while your intentional tones soar to the top.
After being branched into ESP-LTD designs, the company made its signature guitars accessible to the masses. This was done by launching these guitars with the affordable price range. The design of ESP-LTD guitars is quite similar to the typical ESP designs like the Eclipse. Its ESP-LTD EC-1000 is a fantastic guitar model for rock, with high-quality features. In fact, if you are looking for something that could substitute the Les Paul guitar, EC-1000 will be the right choice.

Every year we bring a new opening act on tour with us, and every year I have the harsh task of going on stage after some of the finest players in the business. This summer’s tour was no exception. With Montgomery Gentry in the support slot of the Toby Keith Biggest and Baddest tour, I had my work cut out for me. Two of the best axe slingers the music scene has to offer—Frank Bowers and Bo “two-timechampion” Garrett—have some of the greatest chops and sounds on the circuit today.

The roots of effects pedal usage can be traced back to early into the history of the electric guitar, but two people immediately come to mind who really pushed its usage out there:  Roger Mayer and Jimi Hendrix.  We’ve come a long way since those early days and it’s easy to be overwhelmed by the insane amount of options out there.  From good old standbys to newer boutique options, it can be a chore to know what effects pedals could be right for you.
Whether you’re looking for the best acoustic electric guitar for beginners or a more advanced model, there are so many options that it might be tough to make the right call. If you want to learn more about some of the most popular guitars but don’t have the time to do your own research, then you can count on us to help you out. We’ve scoured the market and compared countless acoustic-electric guitars so we can recommend the best. Our top choice is the Epiphone Hummingbird Pro.

The same goes for Electrovoice's RE20, which counts Steve Albini, John Fry, and especially Glenn Kolotkin amongst its friends. "I like to use RE20s on most amplifiers when they're available", says Glenn, "because the quality is great and they can take really high levels. They're very directional and they're great for rock and roll." The mic also exhibits an unusually wide and flat frequency response and is specially designed to resist proximity effect.

Palmer is a Miami, FL based guitar maker. They have high end models made in the states and cheap models contracted out to the highest bidder like most guitar maker today. I would say that if you tried to sell one of these, you would most likely not get what you paid for it new because they are simply made cheaply in huge numbers. They eventually turn up at used music shops and garage sales around the country. I wouldn't pay more than $50 for one myself and did just that. They make good campfire guitars.
This Japanese company produces a wide range of musical instruments, but the real draw for guitarists will be with beginners and intermediate players. Yamaha offers a solid selection of products at a price that is more budget friendly than some of the other entries on this guide, making it a good place to start for players getting their first guitar.
In order to play your favorite song, you’ll need to learn guitar chords. Use the images and instructions below to learn how to play each chord. The ChordBuddy device can be used for assistance in knowing where to place your fingers In the images the circles represent where you will be placing your fingers (I=index, M=middle finger, R=ring finger, P=pinky). The X’s represent strings that you will not be strumming while the O represents strings that will be played without any frets.

The compressions, delays, and modulation effects are super solid, and unless your friends or audience are ultimate tone nerds, nobody will be questioning the quality of those. One particularly cool delay effect that owners of the ME-80 say is a big deal is the TERA ECHO, which if purchased by itself would cost you around $150. The amp modeling is decent quality, perhaps slightly better than what you get on a Zoom multi-effect, but not quite as nice as a Line 6.
Previously, Epiphone guitars were considered to be the biggest competitor of Gibson. However, they were later acquired by Gibson who has retained the name of this brand to distinguish them from their pricey brothers. You can certainly consider it a budget-friendly production from the high-end guitar makers. Epiphone, just like the Gibson’s Les Paul, shares the same design but is available at a much lesser price. When it comes to craftsmanship, then we must say that Gibson is much better than this one. Unfortunately, Epiphone utilizes low-quality products such as mahogany and other electronic components.

Three full steps down from Drop D. Utilized by Dead by April (on some songs), Metallica in the song "Invisible Kid" from St. Anger, Asking Alexandria (G#) on their self-titled album, Damien Deadson, Love and Death, Architects and The Acacia Strain. Staind also uses this tuning (but with the 2nd string tuned up 1/2 step to emulate a 7-string guitar), as well as several other modified variations of this, such as one in which the 5th string is also dropped from D# to C#.
Although there are now several digital guitar recording preamps which model amps and cabs, the Roland VG88's split pickup system allows you also to experiment with modelled guitars and pickups.Digital noise removal plug-ins (again best used before delay effects are added), produce even fewer side-effects and so may be the best option when recording into a computer-based system. However, you can often achieve a worthwhile improvement using simple low-pass filters — before I moved over to working almost exclusively on the computer, I often used the side-chain high-cut filter in my Drawmer DS201 gate to remove hiss from guitar tracks. The sharper the filter, the less the wanted sound will be affected, so a plug-in with an 18 or even 24dB/octave slope should be even more effective than the 12dB/octave filters the Drawmer uses. The trick when setting them up is to pick the lowest shelving frequency that doesn't materially change the original sound, other than to take the edge off the hiss. Using filters in this way also helps reduce finger noise and squeaking on acoustic guitar parts and can even help disguise moderate clipping distortion caused by recording at too high a level.
The characteristics of your Kingston are very similar to what other owners have reported: occasional scratchy and erratic performance of the electronics, intonation problems, and action that is hard to control (notably due to the lack of a truss rod). Although I can’t verify this, one estimate indicates that over 150,000 Kingston guitars were sold in the U.S. during the 1960s! It’s obvious that quantity trumped quality when it came to producing the guitars, and it isn’t surprising that the electronics have some issues after all these years.
Imagine someone telling you about an old-time music store that had a huge stash of unsold guitars from the 1960s, plus some guitar effects from the ‘70s lying around in its upper floors in Newark, NJ. Well, you can bet it didn’t take long for me to beat a path to the door of Newark Music City (calm down; this was a long time ago and, while the company still exists, it’s long gone from Newark). Even though I was late in the game, there were still unmined treasures to be had. A real Temple of Doom!

Billy Corgan chose the handcrafted LJ16 A.R.E. as the foundation for his signature model. A few sonic changes were made during design at Mr. Corgan’s request -- a slight emphasis on the upper-mid harmonic frequencies creating a better listening experience for the audience and a bit more detailing in the low-mid range to help round out the balance to complement his playing style. Other personalized Billy touches are brass bridge pins, TUSQ nut and saddle, GOTOH open-gear tuners and a unique “Zero” head stock logo.

My first guitar, bought out of an advert in Kerrang over 20 years ago. I think it was branded "Axe" and it had absolutely nothing good about it. Some sort of MDF body, horribly bowed neck (couldn't be adjusted as the truss rod was broken), high frets everywhere (you could pull them out with your fingernails, fortunately), slipping tuners, hopeless bridge, hopeless nut, everything. Nearly put me off playing before I'd got started.
So to get the most from your book, it’s important that you respect the intent of the author in how you approach it. That doesn’t mean you have to work through parts of the book that are below your skill level, it just means that you should always work through the book in a linear fashion. If you need to skip to the middle of the book to find something that applies to you that’s fine, just work chapter by chapter (or exercise to exercise) from that point on. It will help you retain the information that you learn in the book if you work through it gradually as opposed to skipping through it.
One of the most over looked and shockingly good guitars I have ever played in my 23 years of chopping wood. In their rich history there have been little misses, but over all Aria guitars are supreme to their competitor especially at the price point. My 1977 Aria les paul copy has at leased twice the balls as my buddy's 6 year old Gibson and tons more playability. Forget about comparing to epiphone, seriously. eBay yourself a Aria electric and you WILL be pleasantly surprised. Aria acoustics; If your reaching for a nylon, Aria makes some of the best classical guitars with a history of employing some of the most well noted artisans of the craft, such as Ryoji Matsuoka. Fine craftsmanship all around, built with quality woods and have a tendency to get better with age, laminated or not. As for steal strings, I've only played one to be honest, but this Martin 'lawsuit' was a work of art. Thank you.

Even if your favourite musician is predominantly driven by music and is committed to releasing material for their fans, they cannot possibly deny that are a number of incentives for them to do so. A journalist writing for The Economist online explains that songs are ‘complex mixtures of features’, so composers are always trying to find the right mix of ingredients to increase their chances of success. And everyone loves a success story!

The reason for their order boils down to the evolution of the stringed instrument.  By adding a string or two, shortening the neck, and arranging them in a Perfect 4th Interval you can increase the speed of playing and reduce strain on the hands and wrists.  Other interval layouts were toyed with but had some harmonic problems that couldn't be ignored.
1.  And now for my favorite customer fix… A re-glued bridge on an acoustic using Gorilla Glue and wood screws.  This is an epic failure on so many levels.  Wood screws should never be used to hold a bridge on (Gibson, take note) .  And anyone who has ever used Gorilla Glue knows it has no place in guitar construction/repair.  It’s a polyurethane glue that works very well in certain circumstances (water contact, etc.) but the foaming that occurs when the glue is curing can create a humongous mess.  Fix:  Take the bridge off and refinish the top.  What could have been a $85.00 repair is now over $400.00.
{ "thumbImageID": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "defaultDisplayName": "Ibanez AEWC400TKS Comfort Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black Sunburst", "sku": "sku:site51500000177716", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "749.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst-1500000177716.gc", "skuImageId": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
GuitarFella reviewed the Bullet Strat, and despite a few minor complaints concluded, “It was supposed to be the ultimate beginner guitar. Seeing what kind of impact it has now, it’s fair to say that Squier succeeded.” AudioRumble said it “pretty much sets the standard for all other budget guitars.” The last time we checked, its Amazon average rating was only 4.0 out of 5 stars in 14 reviews, but the only specific complaints were about apparent damage in shipping.
Why the Ultra Hard Bodies flopped is a mystery, since they certainly fit with the superstrat rage of the times, but they hung around for only a year or so. According to Walter Carter, Ovation briefly contracted for a shipment of solidbodies made by a Japanese manufacturer. No information is available about these, but it doesn’t really matter since only one carton of 100 or so guitars ever came in. If you find an animal that doesn’t fit the descriptions here, take a picture and let us know about it.
A touring pro friend of my was given one of these years ago by the McPherson company as a promotional endorsement for him to play on stage. After playing his I have wanted one for years. They are indeed expensive, but recently I was able to purchase one. In my 45 years of playing I have always gone through multiple examples of each guitar I've owned before purchasing, and have (and do) own Martins, Taylors, Gibsons, Tacomas, Fenders, Seagulls, Alvarez, Yamaha, etc. which were all really good in their own right. However, nothing I've played has been as good as the McPherson in terms of tone, volume, sustain, note clarity, playability, workmanship; it's useful whether played solo or in an ensemble setting, and for chords or single line playing. It is indeed the last acoustic guitar that I will ever buy.

Most guitars will have at least one TONE knob - a way to adjust the frequency spread of the signal going to the amplification system. Similar to a TONE adjustment on radios, stereos, other things; it usually is a means to adjust how much of the higher frequencies are sent to the output. Rolling the knob “back” will reduce the higher frequencies and can help make the guitar sound less “shrill” if it exhibits that tendency.

Unintentional phase cancellation can also occur if a guitar's pickups are wired incorrectly, or if a new pickup installed in the guitar has different magnetic or electric polarity from the one it replaced. To fix this, the pickup's magnetic or electric polarity needs to be reversed (which one exactly depends on the respective polarities of the other pickup(s) and whether or not hum-cancelling combinations are desired). While the latter is usually a small matter of reversing the pickup's hot and ground wires,[24] the former may be more difficult, especially if it requires the magnet(s) to be removed and reinstalled in a different orientation, a process which can damage the pickup and render it unusable if not done carefully.[25] This is the case with most humbuckers. On the other hand, single-coil pickups with magnetic polepieces can simply be repolarised by applying a strong enough external magnetic field.
In Part 4 of Gibson’s Effects Explained series we’re going to look at modulation effects. This group includes phasing, flanging, chorus, vibrato and tremolo, rotary speaker effects, and octave dividers, the latter of which I have loosely grouped in here because … well, they don’t fit in overdrive or delay, do they? Later analog versions of the first three of these—phasing, flanging, and chorus—do, as a matter of fact, use much of the same technology as echo and delay units, although with chips having shorter delay times, but it makes sense to include them here because their obvious sonic characteristics are of a type with other units made from very different kinds of circuits. Most such effects were developed in an effort to add depth, dimension and movement to the guitar’s natural sound without necessarily distorting it, strictly speaking. A few noteworthy types also developed from effects that were in use on the electronic organ. This is another big category, so we’ll split it into two chunks.
Vintage Gibson Les Paul Special model, introduced in 1955 This 1957 model is killer.Utilizing the Junior’s solid Mahogany body with single cutaway shape but  finished in what Gibson called Limed Mahogany which appeared white on black and white television sets which gives it the nickname of "TV Special"A neck pickup with accompanying volume and tone circuitry was also added making the Special an affordable but still professionally playable instrument. The Special was sold in this configuration until 1958 . Gibson’s surviving shipping records indicate approx. 1,452 Les Paul Specials were shipped in 1957. MORE HERE.

Electric guitars have come a long way since then, and today you’ll see many different designs. But you can still find big hollow-body jazz boxes that hearken back to those early days in the lineups of many manufacturers. They’re best suited for jazz players looking for a warm, woody sound. Of course the technology has improved greatly in the past eighty years, but these instruments still have a nice vintage vibe. You’ll sometimes see these instruments referred to as semi-acoustic.

With this modification, you will not get any parallel sounds which are so typical of the "Fender sound". (For example, "Sultans of Swing" is played with the middle and bridge pickups in parallel). The pickups in series gives you a fuller sound with much higher output, which is good for distortion. If you want a more versatile modification, go to the Wolf Wire™ Modification which will give you series choices, parallel, single coil, and out of phase options.
The BOSS ME-80 gives you all of the effects needed to create that elusive signature tone. The multi-effects unit is a great way to learn how different effects interact with each other to provide you with crystal-clear tones to fuzzy, thick walls-of-noise. If you have an ME-80, download BOSS Tone Studio for an easy way to experiment and learn these effects, have fun and use your ears to build your best guitar sound.
Clapton himself has repeatedly called Guy “the greatest living guitarist.” Hendrix literally knelt at Buddy’s feet in the late Sixties, the better to study his riffs. Guy’s secret? He combines an old-time blues feel with the technical facility of a modern guitar player. He was a youngster at the legendary Chess Records in early Sixties Chicago. Fresh up from Lettsworth, Louisiana, Guy was some 20 years junior to giants like Muddy Waters and Howlin’ Wolf, yet old enough and gifted enough to share the studio with them.
A brilliant musical tool, guitar is one of the most familiar instruments widely preferred by majority of people. Are you looking to buy a perfect guitar? If yes, then check the given Best Guitar Brands In India throughout this page. At some point of time, you must have thought to learn guitar because it not only provided inner sense of pleasure but also impress others. If you are a beginner and passionate to learn this brilliant musical instrument, then must consider below provided popular acoustic, electric and bass guitars. Most importantly the sound and price of guitars are mostly considered by the buyer. Even many Indian musicians have opted them .While it is very tough to choose perfect guitar brand at the beginning learning time.

I love this little guitar. it's perfect for my smaller hands to move around on the fretboard. I've been taking guitar lessons for a year and own a full size acoustic and a electric but I love that this one is both. For the price I wish it came with a stand and cable for an amp though but it's a great starter guitar for kids or a person with smaller hands. I would recommend it. it's acoustic and electric. You will need to buy an amp with a cable to use it as an electric but no cable is needed for acoustic. It even has a built in tuner, they supply the batteries.

Are you running it through a cab simulator? That or proper eqing. Turn up the mids and drop a high pass filter on that sucker. If you're finding it still lacking check out the KeFir cab simulator and then just use the preamp you have now. I've had wonderful results with that. If you're not liking your preamp try out The Anvil by Ignite amps. Best clean tone I've had out of freeware.
When we take a look at a guitar neck, it is important that the guitar is under string tension and in playing condition when measured. The PLEK measures the instruments neck and fret height with the instrument strung up to pitch. The computer ascertained a 3-D like graph of the fret board surface, including the position and height of the strings. Thanks to the PLEK SCAN the relief of the neck made by the string tension is taken into account while calculating the process-parameters. The operator then has the ability to manipulate the parameters to give the player an optimal playing instrument.

Guitar amplifiers vary in wattage. If you're playing to a massive audience, you'll want several 100-watt amps; however, for everyday use, that is overkill. If you merely want it for practice, a 10-watt solid state guitar amplifier will do, and if you're playing to a small venue, you'll probably want to consider a 20-watt valve amp. It's surprising how much sound a little amp will produce.

As a lover of fuzz pedals myself I have both kinds and find uses for them, they sound different and excellent. Other famous fuzz users are Eric Johnson, David Gilmour, Joe Bonamassa, and Stevie Ray Vaughan to name a few. When shopping for a fuzz, try to play as many as you can next to each other, even of the same model. Due to the transistor values the same model pedal can sound and feel very different from pedal to pedal.

Leslie West (real name: Leslie Weinstein) first made his mark in mid-Sixties garage rock, with the Vagrants' meaty cover of Otis Redding's "Respect." By 1969, West was the heavy vengeance in the Cream-like quartet Mountain. On songs like the 1970 hit "Mississippi Queen," West played roughened blues lines with deceiving facility and an R&B flair, through a black forest of stressed-amp distortion. "The riffs were incredible," says Dave Davies. "He could play flashy, intricate phrases. But he wasn't a look-at-me guy. He played with feel."
Compressor pedals add a softening effect too, by reducing the front edge of notes and amplifying their tails. This increases sustain by bumping up the signal as the note fades out. Most compressors allow you to control both the thresholds (upper and lower limits) and the knee (the speed with which the signal is raised or lowered). The big appeal for guitarists is the compressor's ability to simulate the natural compression that tube amps generate when driven at medium to high levels. A good compressor can help thicken up the sound of your guitar and add extra punch to your performance.

In Hamburg in 1960, Beatles guitarist John Lennon bought a Rickenbacker 325 Capri, which he used throughout the early days of The Beatles. He eventually had the guitar’s natural alder body refinished in black, and made other modifications including the fitting of a Bigsby vibrato tailpiece and regularly changing the control knobs.[7] Lennon played this guitar for The Beatles’ famous 1964 debut on The Ed Sullivan Show (as well as for their third Sullivan appearance, pre-taped the same day but broadcast two weeks later). During Lennon’s post-Beatles years in New York, this guitar was restored to its original natural wood finish and the cracked gold pickguard replaced with a white one.[7]
Squier affinity series, looks and sounds great, Fender & Gibson had to start somewhere, so everyone wants to be a star & copy, but everybody's hands and minds are different, don't need to be a star or copy cat to make a name, if the guitar feels good and sounds good, so be it. Be the First, off-brand- (Star),,,,, take the cheap version to new and higher heights,
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: hohner","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"schecter","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.
So what did I buy? A late 1940’s FIDELITY, of course. Haven’t heard of FIDELITY? Me, neither. But it met the needs. It was very light an easy to carry. As for meeting my volume needs…it was VERY quiet. Dead quiet. As in, silent. So, that part needed some work. Sixty bucks. Not bad. Less than an assembly-line stomp box. It looked like a 50’s space heater in crap brown with tootsie roll brown and vanilla cream paint and chicken head knobs. Score, Daddio
In this example I used the "Sub Engineer Bass" patch included in the Kontakt 5 bass collection. But there are no rules in this regard: a simple sine oscillator can do the trick just fine. Back in the '60s and '70s it was not unusual to use a Rhodes to achieve the same effect, and Roland's famous JUNO-106 was also used on countless occasions with the same goal in the '80s. Just give it a go with whatever you have at hand!
When buying any instrument don't buy cheap. I've been playing 5 string for 36 yrs. The most important thing in a 5 string is the tone ring with a resonator. many good brands on banjo's. I have a alverez denver belle flat top tone ring, white eagle arch top tone ring but my favorite is a honher Artist flat top tone ring. Regarding a Good acustic guitar my favorite is a martin D-35 ease of play and tone are awesome. The tone is what you are after.
Hollow-body guitars are best suited for classic jazz, but some musicians have used them in rock, country and blues. If you are a non-jazz guitarist interested in this kind of instrument I’m going to assume you know what you are doing. While these types of guitars can sound great with overdrive in the right hands, they’re probably not the best choice for most rock players.
Fender-type switches are, obviously, found in Fender guitars but are easily available so could find their way into any guitar, most likely Strat-type guitars. Import-type switches are often found in other makes like Ibanez and on replacement pickguard assemblies. If you have a look at my HSH wiring page and scroll down you’ll see I have an import switch in my Godin SD.

In this article you will learn the basics of guitar effects pedals so you will be better prepared to choose the right analog stomp boxes and digital effects to complement your sound. I’m not going to spend too much time on the science of how effects boxes do what they do. But I will do my best to explain, in plain English, the basics of each effect.
I see some people using an A/B box straight from their guitar and then I suppose into two separate chains for 2 separate this a preferred method? I use my mormorley ab at the end and share my chain with both amps. Vox AC4-Marshall DSL...I have been contemplating running two separate chains...I'm fairly new to effects so I've just been toying around. Currently this my chain Guitar-Fulltone OCD-MetalPedals Dirty B*tch-Mesa Throttle Box- MXR 6 band EQ- EHX Small Clone-EHX Small Stone- Catalinbread Montavillian Echo- Visual Sounds Delay- TC Electronic Trinity 2 Reverb- Morley A/B/Y to Amps

Just in...We are proud to offer this fine rare example of a Washburn vintage instrument .... This is super guitar! .. Wow talk about some beautiful exotic woods have a look at the Koa sides & back ,its a Solid Sitka Spruce top, Super high AAA grade 3 piece flamed Ribbon Mahogany & walnut neck with the Martin style Diamond Volute on back.... bone nut & saddle this is first class sound & playability & craftsmanship for a song.... Just look at that workmanship.... Great Tone woods with some ager to her now she a real Singer all right... rare to see one of these with such exotic woods makes it specially beautiful. I would compare the feel & tone and volume to that of the Old FG180 Yamaha's very similar ...Just in and its SUPER CLEAN collectors example so get her before she is gone... any questions .... ask please Thanks for your interest and looking....

This brand is originally from Japan and  Hoshino Gakki owns it. Ibanez activates in U.S.A, Japan, China and Indonesia, and it is one of the largest, recognized names out there. This manufacturer has developed over 300 models of electric guitars and has collaborated with many musicians that have lent their imagination to the making of customized units.

ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Main Spring Stopper Tremolo Block Stop Rod With the guitar tuned correctly, adjust the Main Spring make sure that the Stop Rod makes contact with the Tremolo Block and Stopper. If the Stop Rod does not make contact with the Tremolo Block and Stopper, adjust the Main Spring adjustment screw until contact is made.
Standard Series :[1] Brown Sunburst, Black, Arctic White, Lake Placid Blue, Candy Apple Red, Midnight Wine, Copper Metallic SunburstAmerican Standard Series (as of 2012):[1]Black, 3-Color Sunburst, Olympic White, Jade Green Pearl, Charcoal Frost Metallic, Candy Cola, Mystic Red, Mystic Blue (alder), Sienna Sunburst (ash)American Special Series (as of 2010): 3-Color Sunburst, 2-Color Sunburst, Black, Candy Apple Red, Olympic White, Surf Green

The Hal Leonard Bagpipe Method is designed for anyone just learning to play the Great Highland bagpipes. This comprehensive and easy-to-use beginner's guide serves as an introduction to the bagpipe chanter. The accompanying DVD includes video lessons with demonstrations of all the examples in the book! Lessons include: the practice chanter, the Great Highland Bagpipe scale, bagpipe notation, proper technique, grace-noting, embellishments, playing and practice tips, traditional tunes, buying a bagpipe, and much more!.
Jump up ^ "Now the Gibson Guitar Raids Make Sense". Investors' Business Daily. May 23, 2013. Retrieved July 14, 2018. According to C.F. Martin's catalog, several of their guitars contain 'East Indian Rosewood,' which is the exact same wood in at least 10 of Gibson's guitars. So why were they not raided and their inventory of foreign wood seized? Grossly underreported at the time was the fact that Gibson's chief executive, Henry Juszkiewicz, contributed to Republican politicians...By contrast, Chris Martin IV, the Martin & Co. CEO, is a long-time Democratic supporter.

Guitar Center Twin Cities provides comprehensive guitar repair services for the Roseville area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Twin Cities can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.

DRILLING THE NECK HOLES ON THE BODY Before you do this you can carve down the back of the neck area if that is something you were going to do. If you are just going to leave it flat then that's ok too. The first step if you are using furreles is to map out where you want to place them and then mark the center of the hole where the screw will go. Then take your forstner bit drill enough to fit the furrele inside. Usually you can tell how deep to go if you drill a little at a time, and place the furrele in it to see if it is just low enough in the hole not to see the top of it if you look at the body horizontally or it is flush with the wood. After doing this you can drill the holes for the screws. Use a bit that has the same circumference as the screw including the threading so when you put the scre into the hole it just passes through with out you having to screw it in. Drill in the indention that was left by the tip of the Forstner bit, keeping the drill as straight as possible.

I have a Schecter S-1+ (which I believe is close enough) so I'll try my best to answer. There should be 3 knobs and 1 switch. The toggle switch is the pick-up selector. When it is in the middle the sound is coming from both pick-ups. When you flip it left the sound is coming from the neck pick-up. When you flip it right the sound is coming from the bridge pick-up. Next the 3 knobs. The left knob is the volume for the neck pick-up I believe. The middle knob is the tone. And the right knob is the volume of the bridge pick-up. If you are playing a left handed guitar the switch the directions (Ex. Left would now be right; right would now be left; middle stays the same.) So there ya go. Hope that helped!
Electric guitars have been popular and prominent for decades. For quite some time, being a left-handed musician was considered a hindrance and artists often had to make due with a right handed guitar. Now, there are plenty of fantastic options for lefties so they can make their mark on the music world. As a left-handed musician you probably know that many legendary artists were lefties too- Paul McCartney, Jimi Hendrix, Kurt Cobain, and Dick Dale are just a few examples of musicians who paved the way for up and coming lefties to seriously rock out. Electric guitars are perhaps the most notable and distinctive instrument in pop and rock music. Heavily used on stage and in the recording studio, the electric guitar provides some of the most memorable parts of a song or tune.

In 2013, Gibson introduced the Government Series of Les Paul, SG, Flying V, Explorer and ES-335 guitars which were constructed solely of tonewood the US government seized but later returned to Gibson after the resolution of the company's Lacey Act violation in 2011. The guitars were finished in "government grey" and also featured decorations which intended to draw attention to the issue of government. A year later in 2014, Gibson released the Government Series II[77] of guitars, which were essentially the same as the first series, only finished in a new color: "government tan".
Yamaha’s also excel in terms of their playability, which is an especially important characteristic for beginners. Too many players sacrifice quality to save money on their first guitar, with the result being that they now have to deal with difficult playability that poses extra challenges to the learning process and can sour the learner’s experience with the new instrument. Yamaha offers an enticing balance between cost and quality.

This Duo-Jet has the typical brown back and neck finish, original tuners, bone nut (which has never been off), ebony fingerboard and original frets, lefty thumbprint inlays, original Pat. Applied For Filter’Tron pickups with original wire harness including switches and capacitors. All solder joints are original. Original bar bridge. The lefty Bigsby tailpiece does not appear to be original to the instrument, and is probably a late 60s Bigsby, as there are screw-holes from another tail-piece on the bottom. The second to most recent owner acquired the guitar with its current tailpiece in 1971, and the only change he made to the Bigsby was in removing the black paint. The guitar was recently sent to Curt Wilson at Old School Guitar Repair( at the recommendation of Gretsch guru, Edward Ball, where the front of the headstock was refinished to the correct black(previously Orange) and the center portion of the Bigsby was repainted black. Sadly, the previous owner removed and discarded the original lefty pickguard many years ago.
I followed with visits to six Los Angeles music stores to play as many guitars as I could (more than 60, including multiple samples of many models), so I could get an idea of what their right-out-of-the-box quality was like and which ones offered the best value. I emerged with a list of the most promising models, and I contacted the manufacturers to request samples. In a couple of cases, I allowed the manufacturers to substitute models that they felt were better suited for this article.

Other than the old cranked amp or faulty preamp channel, these are the grandaddies of distortion devices. Fuzzes were also among the first of the transistorized guitar effects being built back in the early 1960s—which is no surprise when you discover the simplicity of most of them. It’s almost pointless to describe the sound of a vintage-style fuzz tone more than the name already does. They slather a slightly wooly, rounded, warm but sparkly distortion all over the guitar signal (see, you could just say “fuzzy”) to give more meat, girth, and sustain to the sound. More imposing units can be guilty of taking charge of the entire signal and bending it to their own synthetic demands—“brick-wall processing,” as Hendrix-approved effects builder Roger Mayer puts it himself (meaning your signal hits that wall and cannot pass through without a total transformation of its nature and character)—while those which many consider to be the more playable devices retain elements of your dynamics, touch, feel, and core tonality. In the case of “brick wall” type fuzzes, the resultant sound is still, usually, more processed and artificial than any of the preceding types of pedals in this category. The more dynamic fuzz pedals, however, are great for working with you and preserving the critical elements of your touch and tone. Turn a tube amp up to where it’s starting to break up and you’ve got gentle overdrive; crank it to the max and you’ve got heavy distortion. Pull out one of the pair of output tubes, use the wrong-value bias resistor on a preamp tube, or beat it senseless with a crowbar and you might just get it to sound like fuzz. It’s not a natural sound, but it can be a great one, and it’s a major part of many players’ signature tones.

If you love effects like we do, we hope you'll find this top-50 list a useful guide to discovering the classic effect boxes that have shaped the guitar sounds of rock, metal, blues, punk and many other styles. And if you're like us, it will undoubtedly compel you to plunk down a chunk of cash for a collectible pedal or two on eBay. Don't say you weren't warned.
There are two main types of electric guitar bridges. There is the "Tune-O-Matic"/"Roller" type, which is found on Gibson, Gretsch and Epiphone guitars. This is usually a removable long oval part sitting on adjustable posts. These posts determine the height of the strings. Another is the "Vibrato"/"Hardtail" type, which is common to Fender and Paul Reed Smith guitars. In this case, bridge and tailpiece are one; there is usually a large, rectangular plate bolted directly onto the guitar with a raised heel which holds the strings and individual string saddles acting as the bridge. These saddles determine the height of the string and can be adjusted individually to create either a flat or arched effect, depending on the type of neck your electric guitar has. According to Chicago Luthiers, "Some just have adjusters that raise and lower the whole bridge, but not the individual strings, and some have both. This applies to guitars with tremolo bars as well as those without."
Numerous sources, such as Physics by John D. Cutnell and Kenneth W. Johnson, state that the human ear can hear sounds ranging from 20 hertz to 20,000 hertz. A guitar is going to fall in this range because it wouldn’t make good business sense to produce an instrument that can only be heard by dogs. From a scientific perspective, just about everything within the normal human range would be considered effective, since the instrument accomplishes its goal. Beyond that, a researcher wouldn’t be able to designate what’s good.
By and large, time-based effects split the guitar output into two identical signals and momentarily hold one back while allowing the other to play in real time. The two signals are mixed back into one at the output. Usually you can control the length of the delay and the amount of the signal that is affected versus the part that stays "dry" (unaffected). This latter control—found on most effects—is usually called the level control.

Locking vibrato: Often referred to as a Floyd Rose bridge after its inventor, like the two-point rocking tremolo, it provides individual intonation and height adjustments. It rocks on two bolts in the top of the guitar and is spring-loaded. The difference is that it clamps down on the strings at both the bridge and head nut. The result is rock-solid tuning, even when the vibrato arm is used radically.
Bass effects are electronic effects units that are designed for use with the low pitches created by an electric bass or for an upright bass used with a bass amp or PA system. Two examples of bass effects are fuzz bass and bass chorus. Some bass amplifiers have built-in effects, such as overdrive or chorus. Upright bassists in jazz, folk, blues and similar genres may use a bass preamplifier, a small electronic device that matches the impedance between the piezoelectric pickup and the amp or PA system. Bass preamps also allow for the gain of the signal to be boosted or cut. Some models also offer equalization controls, a compressor, and a DI box connection.
Run a length of wire (approx two feet is usually plenty) through the jack mounting hole and down into the cavity. When you see the wire in the cavity pull it up through the F hole. Make sure the wire is long enough for one end to stick out the jack hole, and the other to stick out the F hole. Tape the jack hole end of the wire to the guitar with masking tape, or tie it to the strap button. This will ensure it doesn’t fall through the jack hole while you’re working on the other end.

There is no real rule on what fretsize is best – it is purely personal preference.  To find out what size is right for you or for a specific guitar and application, you may have to try similar guitars with different fretsizes.  I have heard many differing opinions on fretsize over the years; some say tall wire is too bumpy for sliding into position or that tall wire causes them to play sharp (from overly pressing down the strings, these players are used to feeling fingerboard surface under their finger tips).  Some say that fretwire below a certain height is difficult to bend on.  Bending and fretting hand slurring techniques are easier when the string can be addressed towards the middle of the ball end of the fingertip so that it may be pushed and pulled from the side rather than fretted from directly on top by the lower part of the fingertip. Some folks like a low fretwire as it feels very smooth to them and they don’t do a lot of slurring techniques.

Chushin is still in operation today in Nagano, Japan and does business with guitar giant Fender. I believe that Chushin may have been a member of the Matsumoto Musical Instruments Association listed further down because both companies produced Fresher guitars during different periods....with Matsumoto beginning production and Chushin ending it (perhaps because the Association was disbanded?). During the 1960-1980 period they were responsible for badges Bambu, Cobran, El Maya and Hisonus as well as some Charvel, Fresher and Jackson badges. The company may have possibly made some guitars with the Aztec, Maya and Robin badges, but that is not verified. Guitars made by Chushin from this period are well-made and appreciated by guitar enthusiasts worldwide.
However, it does give you a good flavour of the Martin and is a very playable plug-in, one of the best ways to see proper guitar emulation in action without paying for it. There are tab and effects options and a keyboard for playing it (we’ll assume if you can play a guitar, you’ll opt for the real thing, anyway). While it is free, we think you’ll be sorely tempted to upgrade, which will set you back $169.
James Patrick "Jimmy" Page, OBE is an English musician, songwriter, multi-instrumentalist, and record producer who achieved international success as the guitarist and leader of the rock band Led Zeppelin. Page began his career as a studio session musician in London and, by the mid-1960s, he had become the most sought-after session guitarist in England. He was a member of the Yardbirds from 1966 to 1968. In late 1968, he founded Led Zeppelin. Page is widely considered to be one of the greatest and most influential guitarists of all time. Rolling Stone magazine has described Page as "the pontiff of power riffing" and ranked him number 3 in their list of the "100 Greatest Guitarists of All ...more on Wikipedia
The 4000 series were the first Rickenbacker bass guitars, production beginning in 1957. The 4000 was followed by the very popular 4001 (in 1961), the 4002 (limited edition bass introduced in 1977), the 4008 (an eight-string model introduced in the mid-1970s), the 4003 (in 1979, replacing the 4001 entirely in 1986 and still in production in 2012), and most recently the 4004 series. There was also the 4005, a hollow-bodied bass guitar (discontinued in 1984); it did not resemble any of the other 4000 series basses, but rather the new style 360-370 guitars. The 4001S (introduced 1964) was basically a 4001 but with no binding and dot fingerboard inlays. It was exported to England as the RM1999. However, Paul McCartney received the very first 4001S (his unit was left-handed, and later modified to include a “zero fret“).
The question is now - do you need the entire bundle? When it comes to the presets, the guitars are all very unique, but because of the mass amount of tone-shaping available once you start twisting and manipulating away there becomes less and less of a distinction — the bundle being over a third less than individually purchasing them doesn’t help the decision making factor at all.   
Mahogany is a durable wood, often described as dense and that is used in the construction of guitars. The main advantage of purchasing an instrument made from this material is the fact that it highlights the unit’s bass and midrange. Therefore, if you are into mellower tones, this is the material that you should pay attention to. The resulting guitars made from this material are usually brown.
Beyond specific favoured mics, a number of engineers also mention more general principles when choosing pairs of mics for guitar recording. Jim Scott and Stephen Street both mention using a 'cheap' or 'bad' mic with a good mic (both give the SM57+U87 combination as an example). "Between the two you can find the ideal sound," remarks Jim, "and you can get brightness and fullness."
Remember that each cited Mark has many different models, some better than others. Above all, the definition of how good a brand or model will depend on the personal taste of its user. When it comes to music, there is a lot of controversy and discussion about what are the best tone, the best touch, and the most beautiful design, ultimately the perception of each person is different. We try here only give direction for those seeking to know good guitar brands. This list is not intended to be exclusive or limiting. Of course, the amount you are willing to pay too much regard to the definition of the right guitar. Soon we will be adding this list marks a bit cheaper and cost-effective. If you think we missed any brand that deserved appear here in the list, send your suggestion to
Great post a lot of useful information here I found this old acoustic guitar made by lotus I have never heard of this brand and have been trying to research it for about a month now and haven't gotten any closer to finding out the history of it if anyone know anything about them I'm all ears it has a tag on the inside model no. LW 65 or g5 lotus made in japan thanks in advance for any information I can get
Fawned over by hard rock-loving guitarists the world over, Marshall is one of the few amplification brands that really needs no introduction. And if you’re looking for aggressive, overdriven rock – this amp is one of the best beginner’s options. What makes this one really special, however, is the sheer number of sound-shaping options it gives you – thanks to its ability to model a whopping 14 MST preamps, 4 MST power amps, and 8 MST speaker cabinets. That’s 448 possible combinations, if you’re keeping score. You can even connect it to your computer via USB or use it as a Bluetooth speaker. If versatility is your top concern (it probably should be), look no further.

A band can sound good with conventional amps and PA gear. But it takes musicians who are sensitive to each other as well as the overall sound of the band. It takes a skilled soundperson who has the gear (and knows how to use it) and enough time to get a proper soundcheck.  Going direct attempts to solve these problems. Adding IEMs (In Ear Monitors) solves more. Yes, you don’t have amps blaring behind you. No, you don’t look like Jimi at Woodstock. Yes, you have to get used to the way things sound and learn how to perform without amps. 
Have you ever looked at a guitar and wondered, "How do they make that?" Or thought to yourself, "I bet that I could build my own guitar," but never actually tried it? I have built several electric guitars over the years and through trial and error have learned many helpful tips that anyone who might want to tackle this sort of project needs to know before starting out. This kind of thing does require some wood working skill and also requires some specific tools as well but not all the fancy stuff that a guitar manufacture has. Building an electric guitar is time consuming and requires the completion of several steps before your project gets finished but be patient and you'll be happy with the results. I tend to go into detail so as not skip any steps or tips you need along the way, and use pics from other projects that I did as well so you can get more that on reference. If you set out to make a guitar you'll find that it takes quite a bit of time so you'll have time enough to go back and read other info if you just want to skim through the first go round. So I hope this helps all the future guitar builders out there!
Electric guitars are solid-bodied guitars that are designed to be plugged into an amplifier. The electric guitar when amplified produces a sound that is metallic with a lengthy decay. The shape of an electric guitar is not determined by the need for a deep resonating body and this had led to the development of contoured and thin bodied electric guitars. The two most popular designs are the Fender Stratocaster and the Gibson Les Paul.
The first two Cordobas we’ve featured have been cedar-top guitars. Now we come to the C7, which is available in both spruce and cedar (see item 7). If you hadn’t noticed by now, the “SP” or “CD” abbreviations in the Cordoba listings indicate the wood that the front of the guitar is made from, so that should help you in the future when looking for a particular guitar with a particular sound, just with the factory-supplied strings alone.
The Les Paul Traditional 2019 is one of the latest iterations of this iconic guitar, bringing over the same pleasing aesthetics and rock friendly tone using modern production methods for improved reliability, consistency and expanded tone options. The body features a classic mahogany body with no weight relief, and a AA grade figured maple arched top. The 24.75" scale length mahogany neck is topped by a 22-fret fingerboard that has a nut width of 1.695". Giving this guitar its classic voice are Burstbucker 1 & Burstbucker 2 humbuckers, with Orange Drop capacitors that replicate the ones found inside vintage Les Pauls.

: : "Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired
While it may sound like a good idea to place a booster pedal towards the front of your chain in order to send that added voltage out from the get go, some pedals can’t handle high levels of voltage which can cause feedback and other problems. Also, you don’t want to simply place it at the end as there is not much benefit in adding voltage when the signal has already lost much of its clarity. It would be like enlarging an already fuzzy picture when what you really want is to keep it from getting fuzzy in the first place.
The only reason the Yamaha Pacifica would have low action is if the string height was set low. Just making a broad statement like “if you want a low action guitar buy a Yamaha Pacifica” I know that is not your words but that is what you seem to be implying. Some beginning guitar player could buy a Yamaha Pacifica that has high action. All guitars can have low action if they are set-up to have low action. Some good info here regardless. Ben.

The construction allows the soundwaves to resonate freely within the body’s hollow airspace as well as around the violin-style F-holes and throughout the solid glue joints. Everything – from the body wood and construction to the neck wood and pitch – contributes to the tone of the 2019 Gibson ES-335 Figured guitar. This model boasts impressive depth and sustain in addition to an exceptional resonance that you can feel through the guitar’s body.

Epiphone features all-metal rock solid hardware on all of its instruments. The Les Paul Special VE comes standard with the legendary Locktone Tune-o-matic bridge and Stopbar tailpiece for easy set up. Tuning is fast and reliable with Epiphone Premium Covered tuners with a 14:1 ratio.The higher the ratio, the more accurate your tuning. The tuners are mounted on an Epiphone Clipped Ear headstock with Les Paul Model in gold and the Epiphone log in silver. In addition, a "2016" Edition logo is on the back of the headstock. 
Anyone who commented that this was a good list needs to reconsider what makes up a great guitar player. It’s about being multi-faceted musician. Creativity, technicality and musicality all come in to play when your talking about the highest quality players. When I listen to a “shredder” like Steve Vai, I think..yes he is fast but his music makes me feel absolutley nothing emotionally. Truth be told…SRV and David Gilmour are probably the only players on this list that deserve to be there.
Clean or replace jacks. To clean jacks use solvents such as contact cleaner or other solvents as a spray and spray the metal parts, clean any excess solvent with a rag. To replace jacks first obtain a similar one that complies with your guitar, then soldering in properly. Work in well-ventilated space to avoid harmful fumes from solder or solvents.

The controls are fairly conventional – one tone and one volume control, each located at the end of a neck, plus a neck selector switch. The switch is mounted on a plastic “bridge” that spans both necks. Each neck features Valco’s usual plastic nut and combination bridge/tailpiece, and the fretboards are similar to ones found on a variety of Valco steels.

John Fahey, who died in 2001 at age 61, was American folk guitar's master eccentric, a dazzling fingerpicker who transformed traditional blues forms with the advanced harmonies of modern classical music, then mined that beauty with a prankster's wit. "His music speaks of a boundless freedom," says ex-Captain Beefheart guitarist Gary Lucas. In the Nineties, Fahey switched to a spiky minimalism on electric guitar that made him a post-punk icon. "To be validated by John Fahey," says Thurston Moore, "was really special for our scene."

Guitar combo amplifiers were at first used with bass guitars and electric pianos, but these instruments produce a wider frequency range and need a full-range speaker system. Much more amplifier power is required to reproduce low-frequency sound, especially at high volume. Reproducing low frequencies also requires a suitable woofer or subwoofer speaker and enclosure, with bass cabinets often being larger in size than a cabinet for mid-range or high-range sounds. As well, the open-back cabinets used on many electric guitar amps, while effective for electric guitar, do not have good bass reproduction.
If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.
This website is not affiliated with the Samick Musical Instrument Mfg. Company in any way. We do not deal in the buying or selling of instruments of any kind, nor do we offer evaluation services for your instruments. Most prices listed are MSRP, taken from catalogs and price lists, and have not been adjusted for inflation (unless specified) and do not reflect the actual street value a model may have sold at. More on prices here: MSRP.
After Fender’s decision in 1982 to switch Squier’s production from strings to guitars, the Stratocaster was one of the first models put under the Squier production line in Japan. It was the most commercially successful guitar Fender had produced. Originally in 1982, the headstock had a “Fender” name written in large script, followed by “Squier series” in smaller script. In 1983, this was later changed to the current 1970s large headstock featuring “Squier” in larger script, followed by “by Fender” in smaller script. Since then, there have been several variations of headstock size and Squier logos, typically based on what series the guitar is.
So what did I buy? A late 1940’s FIDELITY, of course. Haven’t heard of FIDELITY? Me, neither. But it met the needs. It was very light an easy to carry. As for meeting my volume needs…it was VERY quiet. Dead quiet. As in, silent. So, that part needed some work. Sixty bucks. Not bad. Less than an assembly-line stomp box. It looked like a 50’s space heater in crap brown with tootsie roll brown and vanilla cream paint and chicken head knobs. Score, Daddio

Seller: bennick2013 (4) 100%, Location: Marietta, Georgia, Ships to: US, Item: 302905274242 Beautiful red body and maple neck looks great despite minor dings and scratches. Neck is straight and intonates well, action just fine with no divots or dead spots. Get it now before they become scarce and PLAY Condition: Used, Condition: Very Good, Brand: Lotus, MPN: Does Not Apply, String Configuration: 6 String, Body Type: Solid, Body Color: Red, Model: Strat, Model Year: ? See More
The first thing is to adjust height. If you have the first type, you will need a flathead screwdriver. The two posts holding the bridge have flat slotted heads showing at either end. You can turn these clockwise to lower the strings or counter-clockwise to raise them. Find the string height that suits you. For an electric guitar, it will be about 1/4" off of the neck or lower. Get the strings as low as you can for comfort, but be careful that your frets don't start buzzing or that the strings are not coming into contact with pickups or any other parts. If this happens, your strings are too low. If the bridge is the second type, you will need a very narrow Allen wrench to adjust the saddles; you will find the Allen heads on either side of the saddle top.
As I look at all the guitars you fellows have its a pleasure to see so many . to bad I live to far to visit Indianapolis IN .I have a 3/4 Stella that is about 69 years old that I got when I was about ...4 years old . Uncle John Hinson gave it to me for Christmas and I played the heck out of it. At about 12 years old I played in a theater here and was called Mevis Fresley . Rock and Roll and Country . So much fun I had for about a year then Momma and Dad said I had to quit as I was getting to popular, Oh well it was fun while it lasted.. Haven't met Pat Stockdale in person but that child can play a pretty Guitar. Good luck to you all Betty McLevey See More
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: davison","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"davison","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Finally, the Univox 1085 PA Amplifier System ($1,035) was another piggyback with 10 tubes, 105 watts, four channels, eight inputs, external echo or equalizer connection, four volumes plus master volume, bass, middle, treble, presence, reverb with footswitch, and a cabinet with four 15″ Univox speakers with 20-ounce Alnico magnets and 2″ voice coils. It also had 12 high-frequency horns with crossover networks, usually used with two cabinets.
Naturally, if a seller can get more money by calling what they have a “lawsuit guitar”, they’re going to do it. Unfortunately, some writers who should know better have taken to using the term for any old Japanese lookalikes, copys, knockoffs, etc, of (mostly) American guitars. Some sellers are using terms like “lawsuit era” or “pre-lawsuit” which don’t mean anything at all.
Certain features make Vintage® guitars a “bigger bang for the buck.” Subtle changes to traditional guitar designs have been made so they perform much better. For instance, on the spring block, the holes are staggered in a way that allows the strings to leave the block and pass over the saddles at a consistent angle that helps keep those strings in tune. Trev also developed tuning keys called EZ-LOK™ that work like a locking tuner, but actually don’t require any mechanical manufacturing. There’s nothing to unwind when you’re slacking the strings using the vibrato, and they always come back to pitch. The same goes for our pickups. Trev doesn’t have a high-dollar pickup range to protect, so he can produce pickups that will sound as good as any company can wind anywhere in the world.

Just SOLD OUT: here is a great sounding wonderful 43 year old Vintage Japanese OOO guitar in excellent vintage condition. We have already set her up with our Martin Bone Nut & Compensated Saddle and action is dialed in to Martin specs. We also upgraded the original plastic bridge Pins to SOLID Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic if not familiar with the Morris brand thats ok many are not, I have know of these for 2 decades now many of these were made in the Terada factory in Japan... another name you may not have heard of none the less they are know to make the highest end guitars in Japan in those days and also today, for makers like Ibanez virtually all of their top end guitars like Musicians - Artists - George benson GB line and the old Aria L-5's and Ibanez L-5's and many others continuing on today in that great Custom Shop tradition. This is one of them and is very well constructed with top workmanship and fit and finish build quality is comparable to a Martin- Taylor_Gibson and so on... that is to say no worries this guitar Morris has an excellent pedigree. Guitars of great playability and great sounding what more do you need?.... This guitar was built from wods aged at least 20 years at time of build that was over 40 years ago and just look at its condition to this day... it has truly stood the test of time. See for yourself... it this price range a wonderful classic 000 style Japanese true Vintage guitar in its own right. Great Value and great fun Japanese vintage collectible. For a song. .

I recently purchased this guitar,and was wondering if you had any insight of it? i.e.-the pick up selector switch has a reverse,mono,& off setting.Question is:I would like to know if their are certain settings that only work,because I'm just not hearing that much of a difference in sound with this thing? I am running through two amps with the "VOX" original stereo chord,it has 12 volume & 12 tone knobs.

“Guitar has always been an extension of my thoughts without having to put it into words,” says Marcus. “It’s a form of meditation allowing my mind to cut off and to speak through the instrument.” Players often say this sort of thing and it’s often nonsense, but before you scoff, listen to the live medley on 2017’s Due North EP and you’ll hear the truth in this statement. A new King is born? We think so.
Chicago’s vintage guitar shop is located in Ravenswood just west of Lincoln Square. Rock N Roll Vintage is your one stop shop in Chicago for new guitars, vintage guitars, Chicago guitar lessons, guitar pedals, and we are currently the largest synth dealer in the Midwest. Looking for a specific guitar? Rock N Roll Vintage Guitar Shop carries Fender, Gibson, Martin, Gretsch, Rickenbacker and other popular guitars and basses including boutique amps. We have one of the largest selections of effects pedals in Chicago with many hard to find boutique pedal brands.
Great guitar for the aspiring 4-10 yer old. This Lotus 20.25" scale, Kid's Strat copy is in excellent condition! Featuring a maple neck, an unbound rosewood fret-board, simulated mother of pearl fret marker, dot side markers, graphite nut, 6 "in-line" head stock, and an adjustable truss rod. 3 strat style, single coil pickups with 5 position selector. Volume and tone controls. (While not photo'd, the guitar does include the whammy / tremolo bar). This guitar is in great shape with virtually no wear to the original gloss black finish. I actually special ordered it when I worked at Colorado Springs Music Company for my son. I think he took it out of the gig bag a couple times. Comes with a thick padded "codura" gig bag.
My question for this forum is this: I currently have a 2011 Fender Blacktop HH Stratocaster. It has the stock five position switch. All of the electronics are imports i.e.Korea, China etc.. I recently purchased a complete loaded pickguard from a Fender American Standard HH Strat. due to the poor overall performance of the Blacktop electronics-pickups included. Since the Amer. Stan. HH has only a 3 pos. switch, can I rewire it for a five pos. switch ( i.e. coil tapping the humbuckers as the Blacktop is configured)? If this is possible, where would I find a wiring diagram for these particular Fender Twin Head Vintage pickups showing them in use with a 5 pos. switch? Thank you for your time and cooperation.
That's actually a good question. There were several people working on the electric guitar at the same time... so it depends on what you're looking for, and what constitutes a real electric guitar. And to compound the issue, tape recording was also in an experimental stage, back in the 1930s when the electric guitar arose. So live recordings of early performances pretty much don't exist.
Now, you may be wondering if there are things to love about Guitarist and there certainly are. The GUI is incredible and simply one of my favorites around. And if you need funk or jazz rhythms fast, then this is your guy — the auto-wah feature saves this plugin. The more you put realism out of your head and strive for interesting tones, the more you’ll like Guitarist.
There are of course, other buttons and positions featured on guitars. BB king’s Lucille had a switch to toggle different values for R11 (thus going from moody chords to punchy ‘Lead’ with a finger and no need for extra gear). Advanced guitars may have phase and antiphase switches for humbuckers or dual pickups. The jackson 5 Telecaster I think is an example as it has both a phase and anti-phase wiring on their pickup selector.
Some people just need to play loud. It’s all they know and it’s all they want to know. If that’s the case, you might want to invest in some acoustic foam, and begin to soundproof your practice space. This will not only keep the sound level to a minimum for people in the other rooms, it will also represent the first step in transforming your space into a legitimate in-home studio.

The frets are those thin metal bars running down the neck, which act as note separators, allowing you to play individual notes and chords. Most guitars will feature 22 frets, although those more rock and metal-inclined will sometimes offer 24, allowing you to reach higher notes. As a beginner it shouldn’t really bother you whether you have 21, 22, or 24 frets. It’s only as you grow into the instrument you’ll find what works best for you.

Thank you Ola and David for this excellent article. The approach is totally scientific: you try to study the impact of one element of a system while keeping the rest of the settings identical (same pickups, same strings, same picking, etc.). The wood used modifies effectively the electrical spectrum composition and therefore the sound we hear. All the difficulty is that the wood is a part of a very complex system (woods combination, building type, pickups, strings, effects, amplification, restitution, etc.) and, without a solid knowledge or skills, it could be difficult to choose the right elements of the system to get what you want…
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
Johnny was a strange case, a rock and roll outsider who was obsessed with uniformity. And that obsession helped forge the Ramones aesthetic: the identikit leather jackets and ripped jeans worn by each band member, the single surname shared by all four (in the absence of any actual familial kinship) and the terse pacing of the music itself, with not a single excessive note or lyrical utterance.