But who are we to judge a guitar master? We're just writers just trying to make a living. What we needed was to consult working musicians, the guys touring the country like pariahs of the Muse, the guys of metal from Drowning Pool to Warbeast, the guys of blues from Hash Brown to Smokin' Joe Kubrick. I needed to ask the guitarslingers who make their guitars bleed on stage night after night.
My services include re-frets, fret dressing, fret end dressing, action adjustment, truss rod adjustment, intonation setting, nut replacement, bridge saddle replacement, acoustic pickup installation, electric pickup fitting/replacement, output jack replacement, pot replacement, re-wiring, sound post setting, tuner installation, brace re-gluing, broken headstock repairs, strap pin installation, re-strings, bridge setting, tremolo setting, Floyd Rose setting, custom scratch plate cutting, tuning problems, restoration, polishing, cleaning, wiring modifications...Get in touch I'm sure I can help!
Semi-acoustic guitars have a hollow body (similar in depth to a solid-body guitar) and electronic pickups mounted on the body. They work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Whereas chambered guitars are made, like solid-body guitars, from a single block of wood, semi-acoustic and full-hollowbody guitars bodies are made from thin sheets of wood. They do not provide enough acoustic volume for live performance, but they can be used unplugged for quiet practice. Semi-acoustics are noted for being able to provide a sweet, plaintive, or funky tone. They are used in many genres, including blues, funk, sixties pop, and indie rock. They generally have cello-style F-shaped sound holes. These can be blocked off to prevent feedback, as in B. B. King's famous Lucille. Feedback can also be reduced by making them with a solid block in the middle of the soundbox.
Fender vs. Gibson is really not the issue. It has more to do with the weight factor as well as hard-tail vs. vibrato bar. A Telecaster will probably give you the same tuning stability and basic tonal range as an SG, but you might just as well consider an Ibanez or Charvel and get the result you want. A good guitarist can play ANY guitar and get a good result. A bad guitar, conversely, will sound awful no matter how well it’s played if the intonation, electronics, and tuning stability are bad. A Telecaster can be a large guitar. A Les Paul will generally seem lighter, maybe be more comfortable with a shorter scale length, but cost more. A Stratocaster will sound lovely to Strat fans, but then you have a lot of tuning and quirky pickup issues you won’t get with a hard-tail. You may find the Ibanez with a Floyd Rose vibrato bar may give you the best of both worlds, stability and dive bombs. The guitar I recommend for beginners is the Gibson SG, because it is comfortable in size and scale length, achieves both bright and thick tones, and is generally affordable. For prospective Whammy-bar shredders, I would lean towards a Charvel or Jackson at first, and maybe consider a MusicMan. The premium Strat or Les Paul is very desirable and very playable for anyone who has the fingers to bring out the sounds, but if you don’t have the fingers, imo, wait until you do.
The history of Electric Guitars is summarized by Guitar World magazine, and the earliest electric guitar on their top 10 list is the Ro-Pat-In Electro A-25 "Frying Pan" (1932) described as 'The first-fully functioning solid-body electric guitar to be manufactured and sold'.[31] The most recent electric guitar on this list is the Ibanez Jem (1987) which featured '24 frets', 'an impossibly thin neck' and was 'designed to be the ultimate shredder machine'. Numerous other important electric guitars are on the list including Gibson ES-150 (1936), Fender Telecaster (1951), Gibson Les Paul (1952), Gretsch 6128 Duo Jet (1953), Fender Stratocaster (1954), Rickenbacker 360/12 (1964), Van Halen Frankenstein (1975), Paul Reed Smith Custom (1985) many of these guitars were 'successors' to earlier designs.[31] Electric Guitar designs eventually became culturally important and visually iconic, with various model companies selling miniature model versions[32][33] of particularly famous electric guitars, for example the Gibson SG used by Angus Young from the group AC/DC.
The irony with guitars is that an original 1950s Gibson, for example, whilst capable of producing the most amazing sounds, and playing like butter - may not stay in tune, or intonate quite as well as a modern day equivalent. Consequently old guitars have very often been 'upgraded', with original parts lost. But this can seriously down-grade their value. Replacing missing parts with original or period-correct ones can very much improve a guitars collectability, saleability and therefore value.
While these guitars are known for their warm woody sound, they are capable of being used in almost any genre that doesn’t require massive amounts of gain, which is prone to feedback.  The guitarist for the Black Keys, Dan Auerbach, is a modern example of a player who will drive the instrument to distortion, but still maintain the jazzy blues quality these instruments are known for.
Although it is well known for its guitars, Gibson's largest business is in fact electronics.[citation needed] Gibson offers consumer audio equipment devices through its subsidiaries Gibson Innovations (Philips brand), Onkyo Corporation (Onkyo and Pioneer brands), TEAC Corporation (Teac and Esoteric brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems and TEAC Corporation/TASCAM.
So, to make a successful guitar company, you need to beat the best brands out there. But how would you do that? Brands like Fender and Gibson advertise themselves as the original inventors of the two most popular electric guitar models, the Stratocaster and the Les Paul. This is one of their biggest selling points. Unfortunately, you can’t reinvent something that’s already been invented, hence you can’t really beat them at brand name, especially when you’re starting a guitar company. You have to try to beat them at quality, price and novelty (i.e., introducing something new that improves a guitarists experience). Eventually, you’ll have to get some artists to try out your models and sign deals with them. If you get all of this right, I think you should be able to make it big.
This guitar sounds tighter and is less loud than a dreadnought. But its construction warms its tone considerably. Its owners say that its tone is well balanced – clear and punchy but still warm. It offers clarity in the higher registers, but some boom in the lower registers. For that reason, the LL16 is suited to almost any style of playing. It will not, however, be as punchy as the Taylor 210 or as round sounding as the Blueridge.
The Wildwood staff feels that they are some of the best instruments to see the light of day since the mid-60’s. We have worked closely with the Gibson Memphis factory to create unique special run guitars that take these iconic instruments to new levels while honoring the Gibson’s storied history. By producing everything from classic reissues to signature artist models, the Memphis factory is taking their game to a whole new level. We are proud to present our Gibson Memphis inventory, and we invite you to look around and fall in love with one of these superlative instruments.
(function(){"use strict";function s(e){return"function"==typeof e||"object"==typeof e&&null!==e}function a(e){return"function"==typeof e}function l(e){X=e}function u(e){G=e}function c(){return function(){r.nextTick(p)}}function f(){var e=0,n=new ne(p),t=document.createTextNode("");return n.observe(t,{characterData:!0}),function(){t.data=e=++e%2}}function d(){var e=new MessageChannel;return e.port1.onmessage=p,function(){e.port2.postMessage(0)}}function h(){return function(){setTimeout(p,1)}}function p(){for(var e=0;et.length)&&(n=t.length),n-=e.length;var r=t.indexOf(e,n);return-1!==r&&r===n}),String.prototype.startsWith||(String.prototype.startsWith=function(e,n){return n=n||0,this.substr(n,e.length)===e}),String.prototype.trim||(String.prototype.trim=function(){return this.replace(/^[\s\uFEFF\xA0]+|[\s\uFEFF\xA0]+$/g,"")}),String.prototype.includes||(String.prototype.includes=function(e,n){"use strict";return"number"!=typeof n&&(n=0),!(n+e.length>this.length)&&-1!==this.indexOf(e,n)})},"./shared/require-global.js":function(e,n,t){e.exports=t("./shared/require-shim.js")},"./shared/require-shim.js":function(e,n,t){var r=t("./shared/errors.js"),i=(this.window,!1),o=null,s=null,a=new Promise(function(e,n){o=e,s=n}),l=function(e){if(!l.hasModule(e)){var n=new Error('Cannot find module "'+e+'"');throw n.code="MODULE_NOT_FOUND",n}return t("./"+e+".js")};l.loadChunk=function(e){return a.then(function(){return"main"==e?t.e("main").then(function(e){t("./main.js")}.bind(null,t))["catch"](t.oe):"dev"==e?Promise.all([t.e("main"),t.e("dev")]).then(function(e){t("./shared/dev.js")}.bind(null,t))["catch"](t.oe):"internal"==e?Promise.all([t.e("main"),t.e("internal"),t.e("qtext2"),t.e("dev")]).then(function(e){t("./internal.js")}.bind(null,t))["catch"](t.oe):"ads_manager"==e?Promise.all([t.e("main"),t.e("ads_manager")]).then(function(e){undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined}.bind(null,t))["catch"](t.oe):"publisher_dashboard"==e?t.e("publisher_dashboard").then(function(e){undefined,undefined}.bind(null,t))["catch"](t.oe):"content_widgets"==e?Promise.all([t.e("main"),t.e("content_widgets")]).then(function(e){t("./content_widgets.iframe.js")}.bind(null,t))["catch"](t.oe):void 0})},l.whenReady=function(e,n){Promise.all(window.webpackChunks.map(function(e){return l.loadChunk(e)})).then(function(){n()})},l.installPageProperties=function(e,n){window.Q.settings=e,window.Q.gating=n,i=!0,o()},l.assertPagePropertiesInstalled=function(){i||(s(),r.logJsError("installPageProperties","The install page properties promise was rejected in require-shim."))},l.prefetchAll=function(){t("./settings.js");Promise.all([t.e("main"),t.e("qtext2")]).then(function(){}.bind(null,t))["catch"](t.oe)},l.hasModule=function(e){return!!window.NODE_JS||t.m.hasOwnProperty("./"+e+".js")},l.execAll=function(){var e=Object.keys(t.m);try{for(var n=0;n=c?n():document.fonts.load(u(o,'"'+o.family+'"'),a).then(function(n){1<=n.length?e():setTimeout(t,25)},function(){n()})}t()});var w=new Promise(function(e,n){l=setTimeout(n,c)});Promise.race([w,m]).then(function(){clearTimeout(l),e(o)},function(){n(o)})}else t(function(){function t(){var n;(n=-1!=y&&-1!=g||-1!=y&&-1!=v||-1!=g&&-1!=v)&&((n=y!=g&&y!=v&&g!=v)||(null===f&&(n=/AppleWebKit\/([0-9]+)(?:\.([0-9]+))/.exec(window.navigator.userAgent),f=!!n&&(536>parseInt(n[1],10)||536===parseInt(n[1],10)&&11>=parseInt(n[2],10))),n=f&&(y==b&&g==b&&v==b||y==x&&g==x&&v==x||y==j&&g==j&&v==j)),n=!n),n&&(null!==_.parentNode&&_.parentNode.removeChild(_),clearTimeout(l),e(o))}function d(){if((new Date).getTime()-h>=c)null!==_.parentNode&&_.parentNode.removeChild(_),n(o);else{var e=document.hidden;!0!==e&&void 0!==e||(y=p.a.offsetWidth,g=m.a.offsetWidth,v=w.a.offsetWidth,t()),l=setTimeout(d,50)}}var p=new r(a),m=new r(a),w=new r(a),y=-1,g=-1,v=-1,b=-1,x=-1,j=-1,_=document.createElement("div");_.dir="ltr",i(p,u(o,"sans-serif")),i(m,u(o,"serif")),i(w,u(o,"monospace")),_.appendChild(p.a),_.appendChild(m.a),_.appendChild(w.a),document.body.appendChild(_),b=p.a.offsetWidth,x=m.a.offsetWidth,j=w.a.offsetWidth,d(),s(p,function(e){y=e,t()}),i(p,u(o,'"'+o.family+'",sans-serif')),s(m,function(e){g=e,t()}),i(m,u(o,'"'+o.family+'",serif')),s(w,function(e){v=e,t()}),i(w,u(o,'"'+o.family+'",monospace'))})})},void 0!==e?e.exports=a:(window.FontFaceObserver=a,window.FontFaceObserver.prototype.load=a.prototype.load)}()},"./third_party/tracekit.js":function(e,n){/**

If you decide to use my link to Guitar Tricks when you sign up as a member, I will receive a compensation for my referral. I am not a professional reviewer and my views are biased because I only recommend stuff that I use and like. I appreciate if you follow my links to Guitar Tricks if you like I Really Like Guitars and my review of Guitar Tricks. Thank you!
The written history of the classical guitar can be traced back to the early 16th century with the development of the vihuela in Spain. While the lute was then becoming popular in other parts of Europe, the Spaniards did not take to it well because of its association with the Moors.[citation needed] Instead, the lute-like vihuela appeared with two more strings that gave it more range and complexity. In its most developed form, the vihuela was a guitar-like instrument with six double strings made of gut, tuned like a modern classical guitar with the exception of the third string, which was tuned half a step lower. It has a high sound and is rather large to hold. Few have survived and most of what is known today comes from diagrams and paintings.
Valve Amp or Solid State Amp? There's no right or wrong here, but, for tone alone, valve amps are way better. If you can afford a valve amp, just go ahead and buy one! They're the amps all the great bands ever used - from Beatles and Rolling Stones to Arctic Monkeys and Radiohead, 99% of all professional musicians simply prefer valve amps, like the Vox AC30 or Fender Hot Rod Deluxe III. But there's nothing wrong with solid state amps - the audience at a gig wouldn't be able to tell the difference.
Fusion players such as John McLaughlin adopted the fluid, powerful sound of rock guitarists such as Clapton and Jimi Hendrix. McLaughlin was a master innovator, incorporating hard jazz with the new sounds of Clapton, Hendrix, Beck and others. McLaughlin later formed the Mahavishnu Orchestra, an historically important fusion band that played to sold out venues in the early 1970s and as a result, produced an endless progeny of fusion guitarist. Guitarists such as Pat Martino, Al Di Meola, Larry Coryell, John Abercrombie, John Scofield and Mike Stern (the latter two both alumni of the Miles Davis band) fashioned a new language for the guitar which introduced jazz to a new generation of fans. Like the rock-blues icons that preceded them, fusion guitarists usually played their solid body instruments through stadium rock-style amplification, and signal processing "effects" such as simulated distortion, wah-wah, octave splitters, compression, and flange pedals. They also simply turned up to full volume in order to create natural overdrive such as the blues rock players.
Depending on the type of music you're playing, you may actually want your compressor pedal at the end of your chain. For example, if you're playing country music, a compressor pedal at the end of the chain squashes everything, regardless of the effects you're using. With rock music, on the other hand, it typically works better right after the filter pedals.
While it may sound like a good idea to place a booster pedal towards the front of your chain in order to send that added voltage out from the get go, some pedals can’t handle high levels of voltage which can cause feedback and other problems. Also, you don’t want to simply place it at the end as there is not much benefit in adding voltage when the signal has already lost much of its clarity. It would be like enlarging an already fuzzy picture when what you really want is to keep it from getting fuzzy in the first place.
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Mahogany - Back: Solid Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Dovetail - Neck Construction: V-Shape - Fingerboard: Maple - Binding: Ivoroid - Frets: 20 - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Maple - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Open Pore Natural
Most often, you will see effect pedals housed in small metal boxes on the floor at a guitarist’s feet. They are often called stompboxes because stepping on a metal button turns them on and off. Many effects boxes also include a foot pedal allowing the player to modulate the effect’s intensity or volume. Sometimes you will see a larger floor unit with multiple buttons and pedals. These are called multi-effects pedals or processors. They usually have a wide variety of different effects that can be engaged simultaneously. Multi-effects processors have grown enormously in popularity as their sounds and functionality have improved.

This is a guitar that we’ve featured before as our top pick for those who are looking for an electric acoustic for less than $500, so there’s no surprise that it’s back as one of the very best prospects at any price at all. Epiphone might be Gibson’s more affordable brand, but that certainly doesn’t mean you aren’t getting very high quality when you choose the Dove Pro.

The next step up from a Fender Squier Bullet can be a Fender Squier Standard Strat, but if you can afford 50 dollars more you are the owner of a Fender Deluxe Stratocaster which is a really good guitar for beginners, intermediate and advanced guitar players who don’t want to spend a fortune but do want a good quality guitar which is decent enough to upgrade later on with better pickups and hardware to make it top notch. If you don’t want to spend a 1000 dollars on a real american Fender Stratocaster then this is the best alternative.
A combo amplifier is a unit in which both the amp and speaker is integrated. You plug a guitar into one of these, turn it on and you are ready to play. The obvious benefit of a combo is that you have everything you need in one standalone unit, while the sound tends to be optimized by the manufacturer to be the best it can be – there’s no worrying about matching it with a good speaker. Combo amps also tend to be cheaper than heads and, as such, are excellent for beginners. While some are very capable of small to medium-sized performance, the drawback is that combos are limited in power compared to a head. They also tend to be much heavier, which can be a pain when regularly transporting it.
We've already shown you one of Epiphone's Les Pauls. However, that guitar and this model we're looking at here are simply not comparable. Les Paul Standard features a much better set of pickups as well as hardware. Each of the four available finishes on this thing is superb and includes a number of subtle details which really add to the beauty. Most importantly, Epiphone's Les Paul Standard will give you a true taste of what a legit Gibson Les Paul tastes like without breaking the bank.
“I was getting really bored with this guitar sound—or lack of an interesting sound,” Davies remembers. “There was this little radio spares shop up the road, and they had a little green amplifier in there next to the radios. An Elpico. I twiddled around with it and didn’t know what to do. I tried taking the wires going to the speaker and putting a jack plug on there and plugging it straight into my AC30. It kind of made a weird noise, but it wasn’t what I was looking for.
While it was produced, Ovation’s super-shallow 1867 Legend was the recommended guitar in Robert Fripp‘s Guitar Craft.[22][23] Tamm (1990) wrote that the acoustic 1867 Legend has “a gently rounded super-shallow body design that may be about as close to the shape and depth of an electric guitar as is possible without an intolerable loss of tone quality. Fripp liked the way the Ovation 1867 fitted against his body, which made it possible for him to assume the right-arm picking position he had developed using electric guitars over the years; on deeper-bodied guitars, the Frippian arm position is impossible without uncomfortable contortions”.[22]
Another early solid body electric guitar was designed and built by musician and inventor Les Paul in the early 1940s, working after hours in the Epiphone Guitar factory. His log guitar (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Swedish hollow body halves attached to the sides for appearance only) was patented and is often considered to be the first of its kind, although it shares nothing in design or hardware with the solid body "Les Paul" model sold by Gibson.
Rickenbacker has produced a number of uniquely designed and distinctively trimmed acoustic guitars. Although a small number of Rickenbacker acoustics were sold in the 1950s and were seen in the hands of stars like Ricky Nelson[9]and Sam Cooke,[10] the company concentrated on their electric guitar and western steel guitar business from the early 1960s onward. From about 1959 through 1994, very few Rickenbacker acoustic guitars were made.

Here, Rocksmith has a major challenge: It must provide considerably more information onscreen than competitors like Guitar Hero and Rock Band. Those games got off easy—they only needed to relay which of the colored "frets" to play. Because Rocksmith is teaching you to play a real guitar, it has to tell you which fret and which string to play simultaneously. That requires a more complicated visual setup.
Cap paralleled with a resistor. DiMarzio and Seymour Duncan recommend this configuration. Typical values are 560pF and 300K. It’s supposed to provide more consistent treble bleed but having a resistor paralleled with the pot will mess up pot taper. When rolling the pot down it is actually getting closer to a ~190K pot because 500K || 300K gives around 190K.
Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
This model offers the pretty standard budget Stratocaster experience, with the bright, open tone of alder as the body wood. It comes in two configurations, S-S-H and H-H, and given that the humbucker is the star, you might opt for the H-H version, especially because it comes with a coil tap. It’s a solid guitar and should give you everything you need for short money, minus the frustrations of a lot of cheap guitars out there. If you’re just starting out, you could also go cheaper with the PAC112J, but you have to give up the coil tap.

Some multi-effects processors have other onboard features. Yes, you can run your guitar sound through scores of effects, but many processors even offer modeling that allows you to replicate scores of digitally modeled guitar sounds with a huge range of pedal effects and also recreate the tones of classic combo amplifier and head/cabinet sounds. In addition, some processors give you the ability to loop and delay; some have drum patterns, built-in tuners, recording software, presets as well as user-programmable effects, built-in expression pedals and phrase trainers that record a passage you can play back at varying speeds for learning and practice. Many multi-effects processors now have USB connectivity and you will also find that almost all have ¼” (instrument cable connectors) and XLR (microphone connectors) inputs and outputs. Unlike simple effects pedals, all these features are packed into one compact unit.

Re-amping is another increasingly common production technique, often used at the mixdown stage. This process involves a dedicated re-amping device, which takes a line-level feed from a mixing console or DAW interface and converts that signal's level and impedance to one that a guitar amplifier is able to accept. That signal is usually a separate "dry" (unamplified and unprocessed) guitar track recorded using an active 500kOhm direct box placed between the guitar and the amp.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
Simulators: Simulators enable electric guitars to mimic the sound of other instruments such as acoustic guitar, electric bass and sitar. Pick up simulators used on guitars with single-coil pick ups replicate the sound of guitars with humbucker pick ups, or vice versa. A de-fretter is a bass guitar effect that simulates the sound of a fretless bass. The effect uses an envelope-controlled filter and voltage-controlled amplifier to "soften" a note's attack both in volume and timbre.[97]
Certain aspects of this thicker sound can only be achieved by using a bigger gauge of string.  Pat Martino, Stevie Ray Vaughan, and other guitar masters are a testament to this philosophy.  A bigger string will offer a bigger sound, if we are willing to make sacrifices in other areas.  Again, these sacrifices may be negligible depending on your genre.

hi-can you put two caps on your two tone pots or will just the one do as is mormal-aslo on a push pull pot do you need two tone caps one for the bottom half as regular-if putting on the square part  of the push pull pot -can you put on any of the six lugs ie the ones not used -i have instaleed a push pull swich but when down the tone on the neck pickup does not seem to have any effect -when i pull it when usingn the pull pull it does have a effect is this normal-i have now neck-bridge-and all three in a row-when not pulled which would be normal five wat switch sound i seem to get a telecasster sound ,i thought this was the case when i pull it up=i have now a nice selection of sounds—thankls sean
The metal guitars that emerged in the 80's were simply geared towards people into metal, aesthetically geared that is, since all guitarists in every genre want guitars that are easy to play. Their main benefit was in introducing better tremolo systems - the locking nut and fine tuners on the trem so you didn't have to unlock the nut to make fine tuning adjustments. I had one on my Stratocaster, you could go nuts with the whammy bar and it would stay locked in tune.
FRET LEVELING ("Filing", "Dressing"...) $150.00 Worn or uneven frets can he filed level in many cases, if there will remain enough height on the fret to suit the customer (and practical playability). Frets must be lowered to the height of the lowest pit that can be found. Sometimes, replacing the most worn frets is appropriate. Includes "set up" adjustments.

As this effect is more pronounced with higher input signals, the harder "attack" of a note will be compressed more heavily than the lower-voltage "decay", making the latter seem louder and thereby improving sustain. Additionally, because the level of compression is affected by input volume, the player can control it via their playing intensity: playing harder results in more compression or "sag". In contrast, modern amplifiers often use high-quality, well-regulated power supplies.

The first edition of the Telecaster Custom was produced between 1959-1968, and featured a double-bound body. While the guitar was known as the Telecaster Custom, the decal on the headstock read “Custom Telecaster”. Later editions of the Tele Custom were popularized by Rolling Stones‘ guitarist and composer Keith Richards, featuring a Fender Wide Range humbucker in the neck position and a single-coil pickup in the bridge. The market generally refers to the guitar as the “1972 Custom”, indicating the year this model was originally released.
{"id": "451058", "categoryId":"site5LIAA", "name":"Electric, Acoustic and Bass Guitar Stand", "pageUrl":"/Musicians-Gear/Electric-Acoustic-and-Bass-Guitar-Stand.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Electric-Acoustic-and-Bass-Guitar-Stand-Black/451058000001000-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"1", "message":"", "value":"9.99", "priceMin":"9.99", "priceMax":"9.99", "msrp":"24.99", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"10927", "brand":"Musician's Gear", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"360", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5ODD,site5YGH,site5LQ", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"12742902520", "priceVisibility": "1", "itemType": "New"}
Also like Taylor, high-end Martin guitars can cost thousands of dollars and are out of the reach of many players. But the DRS2 Acoustic-Electric is an affordable guitar that will keep you under budget, and allow you to own a real Martin. It features a dreadnought body style for strong projection, and is constructed using a solid Sitka Spruce top, solid Sapele back and sides and a Stratabond neck. Stratabond is a strong laminate Martin has been using on some of their guitars in order to preserve some of those aforementioned tonewoods, and keep costs down. Richlite is another eco-friendly material, and here Martin uses it for the fingerboard and bridge.
The output transformer sits between the power valves and the speaker, serving to match impedance. When a transformer's ferromagnetic core becomes electromagnetically saturated a loss of inductance takes place, since the back E.M.F. is reliant on a change in flux in the core. As the core reaches saturation,the flux levels off and cannot increase any further. With no change in flux there is no back E.M.F. and hence no reflected impedance. The transformer and valve combination then generate large 3rd order harmonics. So long as the core does not go into saturation, the valves will clip naturally as they drop the available voltage across them. In single ended systems the output harmonics will be largely even ordered due to the valve's relatively non linear characteristics at large signal swings. This is only true however if the magnetic core does NOT saturate.[45]
Higher strings can potentially induce some drawbacks that you will need to minimize. Before settling on your new action, you want to determine that strings don’t go out of tune in any fretting positions up and down the neck. You also need to ensure that using a capo, if you ever play with one, doesn’t throw all strings out of pitch too badly. Also note that if this experimentation results in raising your strings considerably from their previous position — and your guitar remains playable after doing so — you might also need to adjust your pickup height slightly. But, note that lowering the pickups further from the strings can often also help the strings to vibrate more freely (as discussed way back in Gibson Tone Tips #1), so leaving the pickups lower might be adding a double bonus to your new playing set up. Play with the options and see what works for you, and that will yield the “best right answer” for each individual player — and once you have achieved it for you, be sure to check and change your intonation, as necessary. If low action floats your boat, great, but it’s worth knowing that there’s a wealth of tone hiding in that thin slice of air between string and fingerboard.
He was no virtuoso, and that's the whole point: By snatching electric guitar from note-shredding technicians and giving it back to artists, freaks and poets, Kurt Cobain became one of the most important players ever. Cobain didn't invent alt-rock. But with his love of Cheap Trick, the Melvins and Kiss, he gave it the metallic power necessary to conquer the world. His playing wasn't all untutored squall, either: See the unconventional chord progression and mastery of quiet-loud-quiet dynamics on "Lithium" – and pretty much every other Nirvana song.
The Les Paul Custom single cutaway was discontinued in 1961 and replaced with the SG (as we know it) designation for “solid guitar”. This model featured a thin 1-5/16″ body and a double cutaway. Confusion abounds to this day over the name Les Paul Custom. Since the single cutaway was discontinued, Gibson transferred the name Les Paul Custom to the new models.

This is hands down THE BEST brand there is! Trust me, I've been playing guitar since I was a kid. I've had used, owned, and tried every guitar there is. Gibson is NO WAY better than PRS, the sound quality of a PRS is awesome! They are pretty light, the designs are awesome as well, although PRS is a bit more expensive than your average guitar it is worth every penny! Gibson's are way too over priced and would never match the PRS. I used to own a gibson sg and lp, and I sold them after I had my own PRS. If you really know the difference between a good and a great guitar you would pick PRS over any other brand. Period.

Thought you'd like to know. Before Christmas, I stopped by a local music shop to buy my 12 year old granddaughter a new guitar to replace an old Beaver Creek she'd been banging on for a few years. Since I'm an old folky from the 1960s, I thought a low end Gibson or Martin would give her both good sound and some bragging rights at her school's guitar club. The shop owner was in the acoustic guitar room strumming something I had never seen before and quickly told me I should forget Martin or Gibson and get what he was playing. It was a Seagull. An equal sound for half the price, he said, so I looked it over, strummed the few chords I could remember, and bought it on the spot. Later, I was still pondering how a little Canadian guitar could be called better than a Martin or Gibson when I found your ratings post. I do believe I kept repeating "Oh my God, it's true!" over and over. And she loves the guitar, especially the smaller neck and fuller sound. Thanks for helping this old folky who always thought Martin and Gibson were names to be spoken in hushed reverence believe in something new.

I disagree, not saying that you can hear tonewoods but saying that it isnt just the string and pickups that make a difference. There is a huge difference in how a string vibrates and pickups do pickup resonances, otherwise a semi hollow would sound exactly like a solidbody and would never feedback. Get some humbuckers put them in a telecaster and then put them in a 335 and tell me they sound exactly the same. What is important is scale length (string tension), weight and various things like bridge design. Get a hardtail strat with strat pickups and then route it for a trem bridge ... it will sound different, maybe minor or major depending on what but it will change the tone.
7. Line 6 Spider V 60-watt 1x10 ($299.99): Line 6 has been an industry leader in the world of modeling amps and the fifth generation of the Spider is no different. Allowing you to access more than 200 amp tones, effect options and cabinet options, the Spider has a very intuitive design that will allow you to switch presets effortlessly, not to mention a color-coded control set. Perhaps the coolest part about the Spider V is the built-in wireless receiver, allowing you to plug into an (optional) Relay G10 transmitter, letting you go cordless with your guitar. With pre-recorded drums loops, built-in metronome and included onboard tuner, plus functionality with Mac/PC and iOS/Android, this is certainly an option worth checking out.
Guitar effects and the boxes that generate them have married theory and practice, history and material, content and form. Such strange logics, inherent to all of these simple devices, radiate sincerity in their transgressive sounds. Or put differently, those “unmistakable sounds,” which can enchant an entire generation, are not entirely intentional, but are born from the accidental collisions between transistors, tubes, wiring, and luck.
I've been coming in since they opened, and it's been crazy cool to watch this little corner shop grow into a major Seattle contender. That's really saying something, as there are some really incredible locally-owned guitar shops in the Greater Seattle Area. As has been mentioned, the service is the selling point. The entire staff are very, very cool people who are perfectly happy to talk shop without trying to push you on a sale. There's a lot of regulars, and combined with the student roster, it definitely has it's own little built in community. Their selection these days is insane, especially since they target a lot of awesome smaller brands that NOBODY else in the area carries. I'm pretty sure this is the only place in town you can go to play the Reverend line, not to mention damn near every PRS model currently in production. The locally-made boutique stuff they stock is awesome too, and I would have never even known about it had it not been for the shop. Kyle, the tech, is an expert. The other guys all do good work as well. This is my go-to shop for basically everything guitar-shop related. And I'm very picky.
A variety of labels are used for level attenuation potentiometers (knobs) in a guitar amplifier and other guitar equipment. Electric guitars and basses have a volume control on the instrument that attenuates the signal from selected pickups. There may be two volume controls on an electric guitar or bass, wired in parallel to mix the signal levels from the neck and bridge pickups. Rolling back the guitar's volume control also changes the pickup's equalization or frequency response, which can provide pre-distortion equalization.
Longworth also illustrates yet another Martin amplifier offered in 1966, the SS-140. Again, little is known of this, except it’s a huge monster tower with a pair of side handles to help you hoist it. Both the appearance and prefix suggest it was solid state. The 140 might suggest the output wattage. It’s highly unlikely Martin only offered this one model, so there are probably a few other OEM Martin amps floating around.

Though the guitar is black, the wood for the top is spruce, with meranti back and sides, and a rosewood fretboard and bridge. This is a full-size guitar (52mm nut), though there is a 7/8” size available. The only thing is, with the 7/8” size you won’t be able to get the black color. The one thing in common between the two is the gloss finish, as well as the types of wood used.
Usually what a lot of people complain about when they say a small amp has a lack of power, they mean that the lower tones feel a little lacking. Well, picking the right amp, and placing it right, should allow the lead guitar to shine with the high tones, while also being powerful with the low tones. Yes a smaller amp will; forever have issues with low tone, but correct construction, presence of vacuum tubes, and even simply the correct placement can all solve these problems during small gigs.
O WOW!...I love...Fallout 4 is a great game like the rest of the fallout series but if your a fan of the series u will be kinda of down that the choices u make don't affect the outcome of the game because they made more of a story they wanted to tell but don't lose hope still a good game and they might make a sequel to new Vegas and there just might be a Multiplayer for new Vegas 2....The world is so large and the gameplay non linear (which is good and bad), I find if I walk away from the game for a while, I have to spend a lot of time figuring out where I was and where I stashed things when I come back to it later.
It comes with a single coil pickup in the neck position and a humbucker at the bridge - switching between the two pickups gives you both a strat like sound and an LP like tone. The pickup selector is 3-way so you can play with both pickups at the same time. It sports a shorter 24.75" scale length and smaller 12" radius on the rosewood topped mahogany bolt-on neck with a 1.6875" nut width making it very playable and accessible to guitarists of all levels of experience. Many customer reviews suggest the Empire HG feels and plays like a more expensive guitar.

That is not always the case with acoustic electric ones, especially with piezoelectric pickups since they pump out a relatively high amplitude signal. All you really need is a small DI box that will attenuate the signal a little, and you plug the guitar straight into a mixer. Naturally, how good this is going to sound will depend on your guitar's preamp.
As discussed, Delay pedals add so much more weight to your sound and gives your guitar a doubling effect, which is really useful to make it sound like there’s two guitars on stage. They’re also great for creating psychedelic sounds and experimenting with riffs. Again, you don’t have to dial in big delay effects and can use the pedal subtly to add resonance.
A few guitars feature stereo output, such as Rickenbacker guitars equipped with Rick-O-Sound. There are a variety of ways the "stereo" effect may be implemented. Commonly, but not exclusively, stereo guitars route the neck and bridge pickups to separate output buses on the guitar. A stereo cable then routes each pickup to its own signal chain or amplifier. For these applications, the most popular connector is a high-impedance 1⁄4 inch (6.35 mm) plug with a tip, ring and sleeve configuration, also known as a TRS phone connector. Some studio instruments, notably certain Gibson Les Paul models, incorporate a low-impedance three-pin XLR connector for balanced audio. Many exotic arrangements and connectors exist that support features such as midi and hexaphonic pickups.