This package features an iconic electric guitar—The Les Paul— paired with a great little practice amplifier, the Electar-10, and quality accessories. The Epiphone Les Paul Special II is a versatile guitar that feels comfortable covering most any major style, including rock, blues, punk, classic rock and more. The guitar features a dual humbucker pickup configuration. The package also includes a tuner (very important), guitar picks and free online lessons to get you playing right away. A cable, strap and gig bag complete the package.
After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
I am very pleased with my new guitar, it is perfect... beautifully crafted, comfortable, just perfect for me...Rosewood and spruce and dynamic design; top of the line case, and the price was substantially less than full price, less than 50%!. There was absolutely nothing wrong with its packaging, as the description indicated. I was a bit nervous thinking it was going to arrive banged up, scratch or damaged, but the box was in good condition and the case was impecable. I got it two days after ordering it, and played it the next day at a school concert. Next will take it to a luthier to get it set, get better strings and an amp. Totally souped! Thanks Amazon for my musical gift for the holidays!

There are of course, other buttons and positions featured on guitars. BB king’s Lucille had a switch to toggle different values for R11 (thus going from moody chords to punchy ‘Lead’ with a finger and no need for extra gear). Advanced guitars may have phase and antiphase switches for humbuckers or dual pickups. The jackson 5 Telecaster I think is an example as it has both a phase and anti-phase wiring on their pickup selector.

{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: music software","pageName":"[gc] shop: pro audio: music software","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: music software","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"music software","prop5":"[gc] shop: pro audio: music software","prop6":"[gc] shop: pro audio: music software","prop3":"[gc] shop: pro audio: music software","prop4":"[gc] shop: pro audio: music software","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
There are a couple of tricks you can try. One is to get an allen key wrench that is SLIGHTLY too large and take a small file to it to taper all six sides slightly. The other trick, which I use sometimes on Stratocaster saddle height screws, is to use a suitably-sized Torx wrench. They're already tapered, and since they're six-sided-star shaped, they grip the corners really well, even if there's a bit of crud stuck in the screw.
He has a way about him that makes you stop and listen, but he isn’t in your face. His sound is very melodic, which is why his tone was so perfectly matched to answering the needs of the vocals, yet he still holds his own in every tune. Bright, confident and edgy, he is a serious guitar-player and he has no intentions of holding back! People often say that he carries humour in his music, which is quite a clever characteristic to portray with this piece of equipment.
More expensive amplifiers may have a patch bay for multiple inputs and outputs, such as a pre-amp out (for sending to another guitar amplifier), a second low gain input, to use with active basses, an in jack to create an effects loop (when used with the pre-amp out jack), an external speaker output (for powering an additional speaker cabinet), and stereo RCA jacks or an 1/8" jack, for connecting a CD player or MP3 player so that a player can practice along with recorded music. Some amps have a 1/4" jack for connecting a pedal to turn the amp's onboard overdrive and reverb on and off or to switch between channels. Some amps have an XLR jack for a microphone, either for the guitar amp to be used for singing (in effect as a mini-PA system), or, for acoustic guitar, to mix a mic signal with a pickup signal.
No matter how good a tech may be, his preferences are going to be different than yours on string height, etc. And he is never going to use the exact same amount of pressure fretting a note as you do (affects intonation adjustments). So, the best you can hope for is finding a good tech with good comunication skills, willing to listen to what you want. I'll admit I've never tried to find one, but that sounds more difficult than learning to do the setups yourself, which is what I did.
The OM-28 E Retro is one of the more recent guitars to come from Martin's OM line, and it is the consummate '30s era style acoustic guitar. The company took their time to carefully replicate vintage OM-28 guitars, from the aged solid sitka spruce top and solid East Indian Rosewood back & sides, down to the smallest appointments - resulting in a guitar that not only sounds amazing, but looks museum-level amazing as well.
A guitar recital may include a variety of works, e.g. works written originally for the lute or vihuela by composers such as John Dowland (b. England 1563) and Luis de Narváez (b. Spain c. 1500), and also music written for the harpsichord by Domenico Scarlatti (b. Italy 1685), for the baroque lute by Sylvius Leopold Weiss (b. Germany 1687), for the baroque guitar by Robert de Visée (b. France c. 1650) or even Spanish-flavored music written for the piano by Isaac Albéniz (b. Spain 1860) and Enrique Granados (b. Spain 1867). The most important composer who did not write for the guitar but whose music is often played on it is Johann Sebastian Bach (b. Germany 1685), whose baroque lute works have proved highly adaptable to the instrument.
Why the Ultra Hard Bodies flopped is a mystery, since they certainly fit with the superstrat rage of the times, but they hung around for only a year or so. According to Walter Carter, Ovation briefly contracted for a shipment of solidbodies made by a Japanese manufacturer. No information is available about these, but it doesn’t really matter since only one carton of 100 or so guitars ever came in. If you find an animal that doesn’t fit the descriptions here, take a picture and let us know about it.
One of the most appreciated brands on the market at the current time, the Epiphone by Gibson surely won’t let you down. The company was founded 144 years ago by Anastasios Stathopoulos and is still running today. This brand is known for producing top-notch guitars that many players love and recommend, the reason why its popularity increased over the years.
A lot of people begin with a nylon string acoustic, often called a classical guitar. They’re reasonably priced at beginners level (don’t go too cheap), the design has a wide fret board to accommodate your inexperienced fingers and the nylon strings are easier on your aching fingertips. You have to agree, they can sound kind of dull unless that dream of yours is of becoming a famous, classical guitarist like John Williams — certainly not a bad thing. So nylon string acoustics are great to learn with, but there’s a risk you’ll want something more pretty quickly. – designs and sells printed circuit boards (PCBs) with a boutique look for classic and boutique pedal designs. Their active forum provides support for builders using the PCBs. A theme throughout their site is that you expensive boutique pedals are simply classic older designs with little or no modification, and you can easily build your own.
Japanese classical guitarist Shiro Arai founded the Arai Co. in the 1950s as an international importing company, which expanded to manufacturing in the 1960s adopting the "Aria" brand name. The explosion in popularity of the electric guitar in the 1960s led them to begin manufacturing and distributing several different brands, Lyle being one of them. Arai attended the NAMM trade show and saw many of the American guitar designs that had attained popularity in the U.S. This greatly influenced Arai to produce similar models.
I just thought you'd like to know that Takamine produced for other names. I've just bought a 1973 Wayne which has a Takamine label inside stating it was made for Wayne. Its a Takamine 375 thats a Martin D35 copy. Wayne were guitar makers in Melbourne Australia in the 1950s and 60s and began importing under their name briefly in the 70s. It sounds amazing.
We also decided to test a separate group of smaller guitars with scale lengths (the distance from the string nut at the top of the neck to the bridge that supports the strings on the body) in the range of 22 inches, as compared with 24.75 to 25.5 inches for most full-size electric guitars. These models may be more comfortable for kids because their smaller hands won’t have to stretch as far, and many adults also like them because their compact size makes them easier to travel with.
THE BODY This is where your guitar starts to take shape. After you have finnished your design you will need to trace it onto the wood that you are going to use for the template or body. A solid blank of tonewood that you can get from online retailers like Catalina Guitars can run anywhere in the price range of $70 to $250 depending on what wood you use. Some people will tell you that different wood will produce a different tone. While this is true in some cases like the crisper higher pitch tone of Mapel and the warmer fuller tones of Mahogany, you probably won't be able to tell the differnce between using a lower grade wood versus a higher grade more expensive wood. The only time that I would splurge and buy expinsive wood is if I was going to use a clear finish on the body and all the other parts of the guitar were going to be high end quality parts. For my project I didn't have a lot of money, much less the expensive tools to work with to produce a result that I would want to break the bank on.
Notch filters (also called band-stop filters or band-rejection filters) are sometimes used with double basses. Notch filters are filters that allow most frequencies to pass through unaltered, while attenuating those in a specific range to very low levels. Notch filters are used in instrument amplifiers and preamplifiers for acoustic instruments such as acoustic guitar, mandolin, and bass instrument amplifiers to reduce or prevent feedback. While most notch filters are set manually by the user, there are also automatic notch filters which detect the onset of feedback and notch out the frequency before damaging feedback begins.
If you want to test the waters, here are the some of the best free guitar effects software packages. Aside from the limited freeware software, there are Lite or Trial versions of commercial programs which you can get for free, but with limited in features. The good thing though is that even when they lack features, they work and sound just as nice.
Let us move from the best amplifiers among the mid range priced small amplifiers to the more affordable ones. The gap between affordable and less affordable has never been felt this much, in terms of money of course. In terms of quality, the gap is not that noticeable, especially not when you have a contender like the Orange Amplifier Micro Crush PiX 3 Watt 9-Volt mini amp. This little orange cube of happiness provides the side of the person it spends it time at, with a whole lot of brightness and a seeming ray of light. Whether it is because of the bright coloring of the amp, or because it is actually a great sound being amplified from it. Whatever it is, I really do enjoy this little piece of vocal citrus, especially since it has the best combination of so many important qualities for an amp. It sounds good, it looks good and it is so easy to maintain and carry with you wherever you go.
Reverend guitars are known to sport many premium appointments despite their modest price tags. And the Jetstream HB is no exception. It has a comfortable roasted maple neck, a Wilkinson WVS50 IIK tremolo, pin-lock tuners and high-end electronic components. A korina body and a 12-inch-radius roasted maple/blackwood fretboard (depending on the finish) complete the other notable specs on this guitar.
The more solid wood there is, the better the overall resonance, sustain and tone of the acoustic guitar. Solid wood, specially those used on the tops of acoustics, also resonate better as it ages. The downside to solid wood is mainly its more premium cost, and not to mention it uses more wood resources than laminate wood. Solid wood is also more prone to damage, so they require extra care especially from changing weather and humidity. Laminate woods are more affordable, and they are also more sturdy and resistant to damage. On the flip side, they will lack the resonance and sustain of solid wood, but this can be a good thing if you're looking for vintage mid-range focused tone.
The Stratocaster’s sleek, contoured body shape (officially referred to by Fender as the “Comfort Contour Body”[5][6] ) differed from the flat, slab-like design of the Telecaster. The Strat’s double cutaways allowed players easier access to higher positions on the neck.[7] The body’s recessed “beer gut” curve on the upper back, and a gradual chamfer at the front, where the player’s right arm rests, aided player’s comfort. The one-piece maple neck’s wider “dogleg”-style headstock contrasted with the very narrow Fender Telecaster’s headstock shape. The strings are anchored on a through-body pivot bridge attached with springs to a ‘claw’ in the tremolo cavity on the back of the guitar.
Because of the way the guitar is tuned and the amount of spread between the notes of each individual strings chords are voiced in certain very particular ways. These voicings are physically impossible to imitate on a keyboard, at least with any reasonable amount of facility. Conversely, keyboard voicings are generally unplayable on a guitar, as you'd have to be playing more than one note on a single string in many cases.
Finally, according to Longworth, the earliest examples of these instruments had laminated bodies made of maple, rosewood and mahogany. A second series was made with a combination of maple and rosewood. A third series was made with maple and walnut. The #1034 EM-18 shown here appears to be very early yet has maple and rosewood, so it’s not clear if materials are indicators of chronology or simply the vicissitudes of fate (or the woodshop, as the case may be).
Whether you call us Guitar Center Forth Worth or GC Cowtown, it's all the same to us! One way or the other, we'll be sure to send a smile and a big Texas "Howdy!" your way when you walk in the front door. Conveniently located on South Hulen Street, we're just a stone's throw from Hulen Mall, near the Chisholm Trail and I-20 interchange. Turn in when you see Chili's, and get ready to experience the down-home vibe that's been growing our community of regular customers since our grand opening back in 2004.First and foremost at Guitar Center Fort Worth, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales to repairs, our staff in each department is well-trained to cater to Dallas/Fort Worth area music-lovers. Our store is open every day of the week, so there's always a right time to visit even if you're on a busy schedule.
Comfort is at the top of the SUB Silo3’s priorities. Its curvy body has contours in all the right places, its asymmetrical neck profile—it’s slightly slimmer towards the treble strings—feels natural in your hand, and even the vintage-style tremolo bridge has a flat surface to rest your palm on. Add a light basswood body, and you’re ready to rock for hours on end.
This right handed 6 string guitar is just so incredible. It is renowned to have been built in high expertise, from a brand that has been in the market for quite a long period of time. It has advanced  frets that make it unique in terms of sound and tune produced. It is quite easy to set up and operate, making it suitable for beginners. The  main reason is the price which is also relatively fair, ranging from around INR 3,999. Find more on:
2. You have me to help you out! I’ve sorted through a bunch of the top acoustic-electric guitars and come up with a list of what I think are five of the best acoustic-electric guitars under $1000. I’ve been playing for almost 30 years, so I know a little bit about guitars. But just in case you don’t believe me, check around for yourself. Every one of these instruments is highly rated and top quality.

It was a great guitar to learn on, but you are ready for a serious gigging guitar.  Okay, if she was your FIRST love then don't dell her, keep her around for inspiration (plus she ain't worth any money anyway).  Do NOT upgrade her.  Once you start, there will be no end.  Sure great pickups will make her sound great, but you'll also want to replace ALL the electronics, and the tuners, and the bridge, and... well, you get the idea.
Delay/echo: Delay/echo units produce an echo effect by adding a duplicate instrument-to-amplifier electrical signal to the original signal at a slight time-delay. The effect can either be a single echo called a "slap" or "slapback," or multiple echos. A well-known use of delay is the lead guitar in the U2 song "Where the Streets Have No Name", and also the opening riff of "Welcome To The Jungle" by Guns N'Roses.[86]
Another negative I found was that this book focuses more on traditional music notation, and places guitar tablature into the background. As a guitar teacher, I believe that tabs are the next best thing to sliced bread, since it makes learning soooo much easier for beginner guitarists. And since learning the guitar is hard, anything that makes it simpler is more than welcome. On the other hand, if you want to learn to read standard music notation, this will be the way to go for you.
The Effect:To this day, there are 3 main delay pedal types coexist, Tape is usually the most expensive and sough-after (especially Vintage releases) type as they provide very natural sound reproduction. Analog were modernized in the 70’s and they worked on electronics, with a minor drawback according to some as they store up to 3 seconds of Delay time. Digital pedals is the type met with most frequency on today’s market, offering longer-than-usual Delay times and pristine sound reproduction, these are usually your best pick. A lot of players know that they want a delay effect but have no idea from where to start, if you are one of them, try the Boss DD-7 Digital Delay Pedal The most basic and often met controls on Delay pedals are Time, Level and Feedback, you’ll sometimes find them labeled differently but with the same function and purpose.
The simplest guitar amplifiers, such as some vintage amps and modern practice amps, have only a single volume control. Most have two volume controls: a first volume control called "preamplifier" or "gain" and a master volume control. The preamp or gain control works differently on different guitar amp designs. On an amp designed for acoustic guitar, turning up the preamp knob pre-amplifies the signal—but even at its maximum setting, the preamp control is unlikely to produce much overdrive. However, with amps designed for electric guitarists playing blues, hard rock and heavy metal music, turning up the preamp or gain knob usually produces overdrive distortion. Some electric guitar amps have three controls in the volume section: pre-amplifier, distortion and master control. Turning up the preamp and distortion knobs in varying combinations can create a range of overdrive tones, from a gentle, warm growling overdrive suitable for a traditional blues show or a rockabilly band to the extreme distortion used in hardcore punk and death metal. On some electric guitar amps, the "gain" knob is equivalent to the distortion control on a distortion pedal, and similarly may have a side-effect of changing the proportion of bass and treble sent to the next stage.

And that’s about that. After ’93 Martin Stingers, like their previous Martin-brand cousins, started drifting off into solidbody byways of guitar history. The Stinger ST-2, basic fulcrum-vibrato Strats with pickguards and three single-coils, in black, red, and white, and the now ubiquitous droopy pointy headstock, was still listed in the 1996 Martin catalog, but these were pale reflections of the peak years.
American Fenders and USA Gibsons are not NOT for beginners! They are for people like myself who have invested 15+ years into developing the skills required to defend a purchase of one. IF you want beginner guitars, go see Mexico Fenders or Epiphone Guitars. Better yet, worry more about your skill and not which brand in on your headstock. I played for 11 years before I upgraded my Epiphone to a Gibson.
From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.

Strumming Patterns: Tremolo is a tough fit here for the same reason as delay. Timing and repeating issues both tend to cause problems.Chords: This can work if used sparingly, especially when strumming patterns are simple and chords are allowed to ring.Short Arpeggios: Particularly if played during a verse, short arpeggios are easily benefited and improved by a light tremolo effect.Quick Solos: Any unique, lead guitar part that needs something extra can be a good spot for the tremolo effect. Usually this will occur during the bridge of a song.

By the 1950's, brands like Gibson and Fender were gaining notoriety thanks to the popularity of rock 'n' roll and its stars weilding electric guitars. Guitarists like Dick Dale, Bo Diddley, Chuck Berry and Chet Atkins could all be found carving their own places in music history with the electric guitar, and by the early 60's the instrument saw an extraordinary upsurge in popularity. Today, there are an endless amount of rock sub-genres, making no shortage of superbly crafted electric guitars from the world biggest brands, including Ibanez, Epiphone, and Danelectro, as well as Godin, Gretsch, Peavey and more. Whether you're into black metal or folk rock, you can be sure that there's an electric guitar that perfectly matches your own style and tastes, and it can easily be found right here, regardless of your skill level or budget.

I inherited a guitar and am looking for any information I can about it. It is a Kent model 533 Videocaster. I have no idea when they were made or what this one might be worth. It is a solid body, but I know next to nothing about guitars so I am not sure what other info might be needed. It needs to be tuned/serviced and possibly needs a little restoration, but otherwise it works and is not in horrible shape. Any info would be appreciated.
Along with the Dobro name, OMI was acquired by the Gibson Guitar Corporation in 1993. They renamed the company Original Acoustic Instruments and moved production to Nashville. Gibson now uses the name Dobro only for models with the inverted-cone design used originally by the Dobro Manufacturing Company. Gibson also manufactures biscuit-style single-resonator guitars, but it sells them under names such as Hound Dog andEpiphone. The Dobro was first introduced to country music by Roy Acuff.
In Vietnam, electric guitars are often used as an instrument in cải lương music (traditional southern Vietnamese folk opera), sometimes as a substitute for certain traditional stringed instruments like the Đàn nguyệt (two-stringed lute) when they are not available. Electric guitars used in cải lương are played in finger vibrato (string bending), with no amplifiers or sound effects.

Good point Gary. The T5 is in a separate category. I found it to be useless as a true acoustic. Thin, weak tone due to its shallow body. Plugged in as an amped acoustic just so-so, and as an electric for rock with overdrive or distortion, pretty good. The Ovations with deep contour bowls, like my Elite 2078, while not so easy to hold, are better at everything, especially unplugged tone, and cost half as much.
One of the best defining features of Schecter guitars is their build quality. It seems that they always go an extra mile. Schecter’s bodies are solid, made of great tonewood depending on the application, and the array of finishes they offer are just impressive. In simple terms, build quality is not something you need to worry about with this brand.
At its core is a combination of solid spruce and maple, which gives it a subtly brighter tone when compared to conventional spruce and mahogany body acoustics. To retain as much of the guitar's acoustic body as possible, Epiphone equipped the Dove Pro with discrete Fishman electronics, with controls that are mounted on the underside of the sound hole.
The Orchestra Model (OM) shape, with its sleek look and versatile acoustic voice, is one of C.F. Martin & Co's most popular guitar shapes. A number of iconic guitarists prefer this particular line, including legends like Eric Clapton and his protégé, John Mayer. I for one own an all-solid wood Martin OMCPA4, and it continues to exceed my expectations. While I have no regrets over my guitar, I have to admit that if I had the funds, I would have gone for the definitive Orchestra Model, the OM-28 E Retro.
In the end I decided to go with the .033μ. Everything larger sounded too wooly to me on the neck pickup. If I didn’t play much EBow, I might even consider the .022μ. But you might make a different choice, especially if you were using brighter pickups. You won’t know for sure till you try it out with your instrument, amp, and hands, but I hope this gives you some idea of what to expect.

These samples are released under the GNU GPL license. The source code being the sf2 files (of which contain the audio samples and settings). The samples and settings can be accessed within Viena and Translator Free on windows or Swami on linux. This license means that you can do what you like with them but if you create any samples from them or improve on them then you have to use the same license in your projects. This way it keeps it open source (and therefore free). This license is only concerned with the source code. Any music you create with them is nothing to do with me (i.e. you take all the royalties and use whatever license you like).
Ok I know Hondo? .... But this is a good one folks its got a lot going for it really have a closer look, its actually built well it is a beautiful vintage guitar in its own right its condition and patina good looks good sound and easy playability make it an excellent entry or back up choice into vintage guitars, The Top appears to be solid 2 piece center seam spruce top you see grain going from top to bottom with really beautiful straight grain with flame type figuring that is surprising on a Hondo it's unique in that feature and it has that patina I love it caught my eye big time as I got close I couldn't believe it was a Hondo, it's logo has that same font as old Martin & Takamine used this one has the look and feel, but it's action was a little off spec , so I fixed all that it has great action now it's neck set and angle was excellent and I ended up changing its nut & saddle out for Martin born nut & saddle set and a new set of 80/20 strings, this guitar has good volume and sweet tone it rings clear and true with good intonation. It's in very good to excellent vintage condition, it's body & neck has no cracks , no finish checking and still shines like glass it's beautiful just have a look, it's not new or mint it has a couple drinks on its top and a couple on its back too but besides those it's exceptional vintage and plays easy with good low action with plenty of saddle left to lower more down the line of ever needed it's set up to meet or exceed Martin specs for playability. This is a lot of vintage guitar for this kind of price WOW! .
For me, the hardest part of mixing is getting the vocals to sit properly. There are a lot of tricks you can apply that can help, but I think one of the most useful is to send the vocal to a bus and insert a compressor there, with a high ratio of around 10:1 or more. Set a low threshold, and a medium attack and release, then, in the next slot, load a distortion plug-in with a warmish sound. Use high- and low-pass filters, set to around 100Hz and 5KHz respectively, and mix a small amount back in alongside the lead vocals. You don't need to add much — it should be almost 'subliminal' — but it can really help to fit the vocal in the track. Nicholas Rowland
One of the most important attributes of boost pedals is their transparency. In other words, they need to able to boost the signal without changing the signal itself. As easy as it sounds, achieving good transparency is pretty hard and not many pedals are capable of doing so. With that said, a good booster pedal is a pretty powerful tool in the right hands.
One of the first successful methods was to record a track as you would any other. Then you would take the recording and play it through a speaker that is placed in a very large room. The magic happens when you put a microphone somewhere in that room to essentially record the sound of a recording. However, by placing that speaker in a large room, they have added a layer of natural reverb.
Many consider the D-28 to be ultimate expression of the dreadnought form. ‘Reimagining’ such a guitar could be a poisoned chalice. Fortunately, you can still feel the gravity of that 184 years of history in its high-end guitars. The latest D-28 features forward-shifted bracing, a wider nut and vintage-style aesthetic changes, but it’s the new neck design that really makes this the most comfortable and accessible dreadnought playing experience we can remember for some time. The sound is balanced and maintains the very definition of an ‘all-rounder’. Notes ring out with sustain - that clear piano-like definition we love from Nazareth’s craftsmen. Harmonics come easy and, with strumming, the high mids and treble have choral qualities that don’t overshadow the lower mids. Despite the tweaks, our test model still largely feels like the acoustic equivalent of Leo Fender’s Stratocaster design. Just as that outline is most synonymous with ‘electric guitar’, so to the D-28 continues to embody the dreadnought in look and sound.

In October 2017, Gibson announced plans to relocate its Memphis operations to a smaller location and plans to sell the Memphis property. Gibson opened its Memphis facility 18 years before, which occupies just a portion of a massive 127,620 square foot complex. According to the Memphis Daily News, Gibson plans to search for a new facility for its Memphis operations and will stay in the current spot for the next 18 to 24 months. The facility, which sits across from the FedExForum along South B.B. King Boulevard, is expected to list for $17 million.
Though the guitar is played through an amplifier which is often miked and recorded, the engineer or producer may later decide to use a different amplifier tone that's better suited to the character and timbre of the song, while preserving all the nuance and inflection of the original performance embedded in the direct track. The re-amp device allows the dry track to be sent to an amplifier again and properly miked and re-recorded for use as the final track.

In launching the AZ series, the goal was not to merely create a completely new guitar model, but to sculpt a great guitar that can foster the potential of the modern ?third phase' while maintaining traditional elements. Even though Ibanez is thought of as a modern guitar brand, it has decades of accumulated knowledge and a history of pushing the boundaries. The AZ series carries with it all of the hallmarks of these tried and tested Ibanez qualities. The harmonic balance between bridge and ...

In general, this measurement is taken by measuring the distance between the bottom of the string and the top of the 6th fret while holding the string down at the 12th fret and the first fret. This is where the capo comes in handy - put it on the first fret so your hand is free to take the measurement. Using a feeler gauge of the desired height, in this example, 0.010, hold the low E string down at the 12th fret (with the capo on the first fret), and measure the distance between the top of the 6th fret and the bottom of the low E string. If the distance is greater than the desired relief, then you need to turn the truss rod clockwise (towards your right) as you're looking down the headstock towards the body of the guitar. If the distance is less than the desired amount, then you need to turn the truss rod counter-clockwise (towards your left) as you're looking down the headstock towards the body of the guitar. The basic rule is:
The original guitar recording preamp was almost certainly the Scholtz Rockman, but within a few years we had several sophisticated competitors (from Sansamp, Groove Tubes and Mesa Boogie) using both solid-state analogue and tube circuitry. These all include speaker emulation of some kind, though usually offer few or no effects. On the whole they are easy to use and some produce excellent results, though they have less tonal flexibility than digital systems designed to model the characteristics of a range of specific commercial amplifier and speaker combinations.
John Mayer: features a select alder body, a thick C-shape maple neck with African rosewood fingerboard and 21 Jim Dunlop 6105 narrow-jumbo frets, American Vintage hardware and a trio of “Big Dipper” single-coils with a special “Scooped” midrange voicing and 5-way pickup switching. Available in a variety of finishes, including black with 3-ply mint green pickguard and gold hardware, 3-tone sunburst and olympic white with brown shell pickguard and as a limited-edition version with a cypress mica finish, white vintage amp knobs and a 3-ply parchment pickguard. In 2010, Fender also released a limited 500 run of John’s personal BLACK1 strat.
{"id": "J40301", "categoryId":"site5AAG", "name":"Les Paul Special Vintage Edition Electric Guitar", "pageUrl":"/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"149.00", "priceMin":"149.00", "priceMax":"149.00", "msrp":"248.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"64", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"20", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"93895071200", "priceVisibility": "1", "itemType": "New"}
Input kewords into the searchbox at the top of each page, then click the WHAT'S IT WORTH button. The search engine will find matching pages based on keywords you type into the Search Box. The engine searches all categories of objects, not just this particular category, so you may get some irrelevant items in your search results. Too many results? Be more specific. Not enough results? Be less specific.
Ovation guitars are produced in the U.S. as well as in Korea and China. Those models in general have a wooden top. Recently Ovation significantly reduced the production of U.S. made Ovation models. From 2010 on better models (e.g., Legend, Elite, Custom Legend, Custom Elite) used to be available, both, made in the U.S. and made in Korea. Before that, the mentioned models were U.S. made. In recent years many U.S. made guitars could be identified by the LX in the product name (e.g., Legend 2077LX), whereas the Korean-made version of the same guitar had AX in its model name (e.g., Legend 2077AX). Again, this name-system has not been used throughout the whole guitar model range (e.g., Ovation 1617ALE). Nowadays only a few U.S. made models are being produced, mostly signature and limited edition models (e.g., Custom Legend 1769-ADII Al DiMeola). Production of the standard model range of Ovation guitars in the U.S. has been seized.[24]
Before we get into the details, it should probably be noted that building a solidbody electric guitar is a much less challenging project than building a semi- or fully hollowbody guitar. Building the latter types from scratch involves sophisticated woodworking skills and tools that will be beyond the reach of all but the most ambitious beginners. And as we note below, designs with bolt-on necks versus set necks are more beginner-friendly.
In addition to building world-class custom basses and guitars, our luthiers also perform a wide variety of guitar repairs, restorations, modifications and upgrades. Whether you have an electric guitar, acoustic guitar or a bass, new or old, feel free to bring it by the shop for a free assessment. We have the experience, skill and equipment to provide maximum playability.
Some guitars have a fixed bridge (3.4). Others have a spring-loaded hinged bridge called a vibrato bar, tremolo bar, or whammy bar, which lets players bend notes or chords up or down in pitch or perform a vibrato embellishment. A plastic pickguard on some guitars protects the body from scratches or covers the control cavity, which holds most of the wiring. The degree to which the choice of woods and other materials in the solid-guitar body (3) affects the sonic character of the amplified signal is disputed. Many believe it is highly significant, while others think the difference between woods is subtle. In acoustic and archtop guitars, wood choices more clearly affect tone.