Also called a “wah-wah pedal”, the wah was one of the earliest effects designed for guitar players and has remained popular ever since. Basically, a wah uses a pedal and filter to sweep the tonal range from bass to treble, creating a vocal like “wah” sound. Some players also use them as a tone control leaving the pedal set at different settings to get different tones.
Most of the time, a chord diagram will not show you the finger numbers. They will leave that up to you, because different people sometimes play chords differently. Some people cannot play an A chord like this, because their fingers are too big, and this fingering is very cramped for them. Instead, they play an A with a mini-barre, using the same finger for more frets. For example, I could bar my 1st finger across the 4th, and 3rd strings at the second fret, then place my 2nd finger on the 2nd string, second fret (see image on the left). This gives me more room between the frets, and also frees up my 3rd and fourth fingers to pick out melody and bass notes. It’s just a preference, you can play the chord how you prefer.
I am not satisfied with the sound I am getting from my guitar so I have decided to invest in a new set of strings. I bought an Electric guitar about 1 year ago and have not changed the strings as yet. Since it was not new when I bought it so I do not know how long they have been on it. I am not sure what the gauge of the strings are. I am trying to play lead. Should I go for a .,08 or .09 or a bit higher? I want to do bends as well.
While I have been able to find ways to get it to work for me most of the time, I have found that the controls for the video looping feature are not as precise as I would like them to be. There is definitely room for improvement. Another thing that I am missing is the option to control the speed of the video playback. Some competitors allow for the video playback to be slowed down or sped up while retaining the correct pitch. Guitar Tricks have been listening – Improvement have been made!This is a great help if you want to practice to play along at a slightly slower speed or if you want to review something in more detail. Luckily I have found a little helper too that allows me to control the speed of the video until Guitar Tricks are including this feature into their video player. I am using the MySpeed tool from Enounce. They advertise it to speed up videos to save time watching them. It also works a treat slowing videos down.
If you do have logic of GarageBand they come with a vast sample library including lots of different guitar sounds, now combine that with melodyne and you can get some pretty convincing custom guitar parts. It's a slow process but it will sound a lot better than most straight VI's, I've done the same with brass section stuff in the past to good effect.
The middle S (Position 3) by itself also works very well for chord strumming, and it also responds very well if slapping is something you like to do (A single coil in the middle is literally the textbook choice: Single coils typically have more bite and will bring life to the pops, and it's position will ensure the slaps aren't too boomy (like a neck pickup would be) or too tinny/nasally (like a bridge pickup would be)).
We are recording between June and July our new album entitled "Brutal Agression" which should be out in October/November, also we were recently invited to Rock al Parque in Bogota, which is one of the biggest festivals in Latin America, joining Cannibal Corpse, Havok, Symphony X, Internal Suffering and many more. After that we will play at other festivals such as Mamut Fest y more to be confirmed, then we will concentrate on album release and touring, which will be accompanied by one or more videos.
A multi-effects device (also called a "multi-FX" device) is a single electronics effects pedal or rack-mount device that contains many electronic effects. In the late 1990s and throughout the 2000s, multi-FX manufacturers such as Zoom and Korg produced devices that were increasingly feature-laden. Multi-FX devices combine several effects together, and most devices allow users to use preset combinations of effects, including distortion, chorus, reverb, compression, and so on. This allows musicians to have quick on-stage access to different effects combinations. Some multi-FX pedals contain modelled versions of well-known effects pedals or amplifiers.
But when combined with those Dean humbuckers, this thing full-on rocks! It’s full of gain, fuzz, buzz, but still articulate enough thanks to the strong middle frequencies, reeling in that Dime sound to cut any mix and in style. Additionally, the price is lower than many of the models on the rundown, making this puppy a safe choice for cheap good guitars.
For beginners looking to practice their first notes, chords and songs, nothing more than a couple of watts is needed – in fact, most dedicated practice amps won’t offer much more than 10 watts. If you are planning on jamming with a full band or starting to gig in small venues (think bars, clubs and small halls), then anything from 15 to 50 watts will suffice. Bigger gigs, including auditoriums and outdoor festivals, will demand upwards of 100 watts.

The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").
My 15 year old daughter recently renewed interest in the guitar she had bought a few years ago but had never really played much.  She was disappointed when she noticed the strings were loose.  We brought it here and Ted was so helpful and engaging. He recommended new guitar strings; normally you can buy the strings and do it yourself, or pay them to do it.  He readily understood that while my daughter didn't know how to do it herself, she would like to know. He showed both my girls how to string a guitar, talking them through each step while he expertly strung the guitar and got it in perfect tune. Ted teaches guitar and his tutorial was an excellent recommendation of his teaching skills.  He also threw in a cleaning cloth and gave us chocolates - how much better does it get than that?!
I agree with Squank, and I appreciate the compliment! We live in a golden age of guitar gear and I’m in the lucky position of getting to play through quite a bit of it. It’s rare that I come across an amp, pedal, or other piece of guitar hardware I truly dislike, and I can usually get a decent, useable tone out of most modern equipment. This month, I’ll share some of my thoughts on dialing in great tone on amps, pedals, and guitars.
With so many features, it can be tempting to just dismiss it as a low quality jack-of-all-trades unit, but even experts are convinced of its versatility and sound quality. Guitar World concludes: "Costing less than most single-effect stomp boxes, the G1Xon is an incredible bargain that provides versatile multi-effect processing power and impressive performance and practice capabilities."
Numerous classic guitars made by the likes of Gibson, Epiphone, Fender, and Guild are worth thousands, sometimes tens of thousands; a little expensive for the average player, and often these are the preserve of investors and collectors. Early versions of the Gibson Les Paul, SG and Flying V guitars, or the Fender Stratocaster or Telecaster. But there are still very many affordable, great sounding, and exciting to play vintage guitars that offer something simply not available in a new guitar. A well-built vintage instrument, although expensive can actually be superb value for money in comparison to some of the new guitars available at that price.
EQ or equalization effects work by boosting or cutting specified frequency bands within the sound signal. From treble or high-end sounds such as the sizzling sounds of a riveted cymbal to low-end sources such as the thump of a bass drum or bass guitar, EQ effects don't change the pitch but rather alter the timbre or quality of the sound. Depending on the application, EQ control can be quite precise or very simple.
When I first plugged it in, it made a sound like it was "fretting out" if you put a bar at the twelfth fret position. That's a pretty good feat, given that the guitar has no frets. It turned out that someone had cranked up the pole pieces for extra gain, but had cranked them so far that the strings made contact with them when the guitar was played. A quick tweak right in the store with a jeweler's screwdriver sorted them out and revealed the lovely vintage sound of this little beastie. Supro developed a neat strings-through pickup system with staggered pole pieces that this guitar features.
The Fender Stratocaster features cutaway horns that give musicians access to higher frets. The back of the body is designed for comfort for longer performances. These guitars have three single coil pickups which transfer the string vibrations to the amplifier. They can all be turned on at once to produce a wide range of sounds. It also features a tremolo bar which allows you to lower or raise the pitch, much like tremolo pedals themselves, by pulling up or down on the bar to produce different effects. Stratocasters are the best option if you like to dabble in different playing styles and music genres.
That’s why it’s incredibly important that once you work through your first method book you should start seriously considering finding a teacher to further your education. A teacher can help give you the tools that you’ll need to continually advance on your instrument, which in turn will ensure that it will be a lifelong source of entertainment and enrichment.

The same bracing system and pickups in chrome covers are also included within the Vintage Reissue Series, with individual volume and tone controls, and a 3-way bat-style selector switch. Hardware includes individual chromed saddle-style mounted bridge with height adjustments, and a chrome trapeze tailpiece. The one-piece, Canadian maple set neck features a 20 fret, bound rosewood fingerboard, with pearloid block position markers.

{ "thumbImageID": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "defaultDisplayName": "Schecter Guitar Research Hellraiser C-1 with Floyd Rose Sustaniac Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Cherry", "sku": "sku:site51361806818304", "price": "1,099.00", "regularPrice": "1,099.00", "msrpPrice": "1,549.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry-1361806818304.gc", "skuImageId": "Hellraiser-C-1-with-Floyd-Rose-Sustaniac-Left-Handed-Electric-Guitar-Black-Cherry/H94811000001000", "brandName": "Schecter Guitar Research", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
While all of the aforementioned stomp boxes (pitch shifter, envelope follower, wah pedal, compressor and overdrive/distortion) should be plugged into the amp’s input, modulation effects can be connected to an amp’s effects loop instead of into its input. Again, this is a matter of taste. Some guitarists prefer the more “pristine” sound quality of modulation effects patched into an effects loop, particularly since this setup can help reduce overall noise.
The Fender Stratocaster Squier is possibly the most recognizable shape in electric guitar history. The Fender Stratocaster design is mimicked by manufacturers all over the world. Fender produces its own line of budget “Strats” called the Squier series. If you want to start with an electric guitar, chances are you’ll buy something like this for around $130 USD.
Guitar amps for newbies aren’t going to sound as good as the professional rigs used by advanced guitarists, but surely you don’t expect that for under $100. However, they should still sound good. In fact, in my opinion a starter amp should be good enough that, once you’ve moved to a better main amplifier, you can still use your first amp for practice.
Most users and experts agree that the Zoom MultiStomp MS-50G is a high quality and high value pedal. But it's not just about bang per buck, because many are satisfied with the quality of its effect and amp emulations. Even Music Radar is convinced of its performance saying, "While not all of the sounds are going to appeal to all players, there are enough usable tones here to make this a very practical item for just about anybody who uses effects."
List of acoustic guitar brands that include the most reliable models available. Acoustic guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson, and more. What are the best acoustic guitar companies? Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
The solid-body electric guitar is made of solid wood, without functionally resonating air spaces. The first solid-body Spanish standard guitar was offered by Vivi-Tone no later than 1934. This model featured a guitar-shaped body of a single sheet of plywood affixed to a wood frame. Another early, substantially solid Spanish electric guitar, called the Electro Spanish, was marketed by the Rickenbacker guitar company in 1935 and made of Bakelite. By 1936, the Slingerland company introduced a wooden solid-body electric model, the Slingerland Songster 401 (and a lap steel counterpart, the Songster 400).

Above here's a blast from the past. The reissue of the 1960's Harmony Stratotone H49 Jupiter. Originally this guitar was manufactured in Japan, but these babies came straight from China many years later. They copied them right down to the T including those Gold Foil Pups. Guitar is hollow body and has a volume, volume, tone, tone, master tone knob, with a really cool 3 way switch. They don't come up on Ebay to often and this ones like brand new but was briefly used. Sold

The neck's profile and width affects the guitar's playability and the player's comfort when fretting. While most necks are either "C"- or "U"-shaped, the width and depth of the neck in relation to the player's hand is an important consideration. Players with smaller hands should seek out narrower, shallower necks while those with larger hands will most likely find beefier neck profiles more comfortable.
 Most 700 and 800 models, except for bass and probably 12-strings, were equipped with a vibrato bar. After 45 years or so the bar has gone missing on many of them. Some model 820s were equipped with a genuine Bigsby vibrato. The advertisement at left features the Bigsby-equipped Model 820. The advertisement on the right is identical except that it showed the stock Kent vibrato tailpiece. According to the catalogue of the time, the Bigsby was only available on the sunburst model 820.

In the 1980s, digital rackmount units began replacing stompboxes as the effects format of choice. Often musicians would record "dry", unaltered tracks in the studio and effects would be added in post-production. The success of Nirvana's 1991 album Nevermind helped to re-ignite interest in stompboxes. Some grunge guitarists would chain several fuzz pedals together and plug them into a tube amplifier.[47] Throughout the 1990s, musicians committed to a "lo-fi" aesthetic such as J Mascis of Dinosaur Jr., Stephen Malkmus of Pavement and Robert Pollard of Guided by Voices continued to use analog effects pedals.[48]

Another way to set up your pedals is by placing them within the effects loop of your amplifier.  An effects loop is an audio input and output loop that is placed after the preamp and before the power amp section of your amplifier, using the Effects Send and Effects Return jacks. On some amplifiers, these can be labels Preamp Out (Effects Send) and Power Amp In (Effects Return).  Not all amplifiers have effects loops, but those that do allow for you to place some of your effects within the loop.
More expensive amplifiers may have a patch bay for multiple inputs and outputs, such as a pre-amp out (for sending to another guitar amplifier), a second low gain input, to use with active basses, an in jack to create an effects loop (when used with the pre-amp out jack), an external speaker output (for powering an additional speaker cabinet), and stereo RCA jacks or an 1/8" jack, for connecting a CD player or MP3 player so that a player can practice along with recorded music. Some amps have a 1/4" jack for connecting a pedal to turn the amp's onboard overdrive and reverb on and off or to switch between channels. Some amps have an XLR jack for a microphone, either for the guitar amp to be used for singing (in effect as a mini-PA system), or, for acoustic guitar, to mix a mic signal with a pickup signal.
Primarily, reverb pedals tend to give you a lot more variety and control over the effect than you'll have with an amplifier. In fact, most amps that have reverb will have a single reverb knob that you turn up for more of the effect, or down for less. This can work if you use reverb sparingly, but if you're into the effect and like to use it a lot, that's not enough control to really get the most out of your reverberated tone.

As a result of requests by audio engineers to reduce onstage volume, in the 2010s, in many large venues. much of the on-stage sound reaching the musicians now comes from the monitor speakers or in-ear monitors, not from the instrument amplifiers. Stacks of huge speaker cabinets and amplifiers are still used in concerts in some genres of music, especially heavy metal, but they tend to be used more for the visual effect than for sound reproduction.
In addition to tuning and setting their guitar’s pickup configuration and tone control(s), electric guitarists must adjust the sound on their amplifier to achieve their preferred sounds. With the right settings, electric guitar players can play in a variety of styles from country chicken pickin’ to jazz, rock, blues, heavy metal and everywhere in between. This versatility can’t be matched by the acoustic guitar.
Vibrato design is slightly changed and enhanced with the addition of block saddles for adding a fair amount of firmness to the tone. Likewise, they also give a precise breakpoint for the strings. Talking about pickups, pac 112v is equipped with 5-way blade pickup selector. Similarly, master tone and volume controls are also provided for the neatest output.

The person who said "I have a friend who plays an ashton, and he actually thinks it's a good guitar, while he constantly has to put paper under the strings because otherwise everything above the 3th fret is literally unplayable. Poor guy" MAY I POINT OUT that they just stated how the guitar was in a poor condition but said nothing about why or how long the guitar has been played and all these essential details.
Squier Affinity Telecaster: The Tele features the same tonewoods as the Strat, with a slightly different single-cutaway body style. It also has two pickups instead of three, and a fixed bridge. Single-coil pickups have a thinner sound compared to humbuckers, and it case of the Telcaster they create the signature twang that put the guitar on the map.
Signature guitars in India provide a convenient way to cherish the same guitar experience, reminds you of your favorite artist. These are specified guitar models named after the top guitar players, and designed with their instructions to make them a real emblem of their signature music. In fact, some signature guitar brands are directly created by your favorite artists to ensure precision.
The Hi Flyer was a thin-bodied reverse Strat-type with a German carve around the top, almost always seen in sunburst. This was identical to the Aria 1702T. The bolt-on neck had a three-and-three castle head, plastic logo, string retainer bar, zero fret, 22-fret rosewood with large dot inlays. A white-black-white pickguard carried volume, tone and three-way. Two black-covered single-coil pickups were top-mounted, the neck slanted back like on a Mosrite, with six flat non-adjustable exposed poles in the center. An adjustable finetune bridge with round saddles sat in front of a Jazzmaster-style vibrato. The plastic logo was still in use in 1971, though gone was the string retainer, replaced by a pair of little string trees. Dots had gotten smaller by ’71, and the Hi Flyer was available in three finishes – orange sunburst (U1800), black (U1801) and white (U1802). The Hi Flyer listed for $82.50 (plus $12 for case) in ’71.

There are two basic types of pickups for electric guitars, Single Coil and Humbucking (double coil). The most practical difference is that single coils tend to sound crisp and bright while humbuckers tend to sound warmer (for more information see Seymour Duncan's detailed explanation). An electric guitar can have any combination of the two types and the combination on a guitar is described using the first letter of the pickup type in order from the one closest to the bridge. For example a classic stratocaster will be described as SSS meaning all three pickups are single coil. A more recent development is the HSS strat which means it has a Humbucker at the bridge with two Single coils. I've put the pickup configuration of each guitar below in brackets after the model name so you can easily see which pickups each guitar has and in what positing they are.

If you’re looking for a solid start on how you will sound without settling for a tube amplifier due to its price, maintenance and back breaking weight to carry around. The Marshall MG30FX combo amp is surely one of the best out there on capturing iconic sounds, as well as the legendary Marshall tones that other brand of amplifiers frequently emulates, adding it to their bank of amp models.
With over 8 decades of development, the electric guitar and music from guitars is getting progressively more sophisticated. Nowadays there are thousands of models available, from a number of manufacturers; electric guitars come in all kinds of shapes and sizes – some reminiscent of the regular acoustic guitar, and some drastically different from the traditional instrument. Regardless, there's a number of features which are invariably present in practically every electric guitars: the headstock, neck, body and strings. The headstock includes the machine heads, truss rod (may not be used in all models), string guide and nut; this section is used for tuning and holding/adjusting the strings. The neck serves the function of supporting the strings, and it's comprised of a fretboard, the inlay fret markers, the actual frets and a neck joint. The body of the guitar is comprised of several mechanisms including the pickups (neck and bridge), saddles, tuners, pickup switch, control knobs (tone and volume), output connector and strap buttons – sometimes others, in more sophisticated models. Finally, the strings are usual divided in brass and treble variants.

Effects are fun, and can make mixing a more creative process, but it's worth bearing in mind that they won't help in situations where the basic principles of recording have been ignored! Used with care, effects can help turn a good mix into a great one, but they are seldom successful in covering up other problems. It is also very easy to over-use them — sometimes their most valuable control is the bypass button, and it is certainly worth learning to use the basic effects well before throwing lots of complicated tricks at your sound. As long as you let your ears decide what is right, you should be OK, and a little critical listening to your favourite records will give you a feel for what works and what doesn't. 
Having spent years developing the JDX 48 and Headload, it only made sense that Radial would develop a solution for guitarists who didn’t want to use an amp at all; hence, the JDX Direct-Drive™ was born! The Direct-Drive lets guitarists choose between three different amp voicings: “Combo”, “Stack” and “JDX 4×12”, with further controls to adjust the brightness of the amp. The guitarist simply plugs in their guitar through their pedals, into the JDX Direct-Drive and out to the board with an XLR cable. There are additional outputs for attaching to onstage amps or speakers as well for guitarists who are more comfortable having volume with them on stage. The engineer can then mic the amp and mix the two signals together to get the best tone out of the PA system.

Flanger – a time-based effect likened to the sound of an aeroplane taking off and landing. The “whooshing”effect is created by feeding the output of the guitar tone back in on itself with a very short delay (usually less than 20 milliseconds) causing comb filtering (boosts and cuts along the frequency range). The delay time is then varied which causes the comb filter to move up and down the frequency range.
The Fender CC-60SCE acoustic-electric guitar combines the powerful onboard electronics with classic Fender tone and the comfort of their longstanding craftsmanship. The smaller concert body features a solid spruce top, mahogany back and sides, and "Easy-To-Play" neck, making it a perfect choice for beginning to intermediate level players looking to take the next step in their music. 
So fun...I like...I liked it I liked it a lot but the only thing was it took me awhile to get the email that was supposed to get so that is a kind of backed me up on the game but I'm doing good now though so that is good good good good good good good...The fact that the studio is making Mortal Kombat asked on the next generation console is showing you how much they want to improve on disfranchise if they made it for last GEN consoles as well done they would have not done a justice that it deserves besides the DLC being 30 bucks which is a big downfall for me see nest Jayston predator are one of my all-time favorite colors of all time I just wanted them still good game
Categories: Guitar manufacturing companies of the United StatesGuitar amplifier manufacturersManufacturing companies based in ChicagoManufacturing companies established in 1890Companies disestablished in 19681890 establishments in Illinois1968 disestablishments in IllinoisDefunct companies based in IllinoisMusical instrument manufacturing companies of the United States
An overdubbing session is ideal for air-guitar miking because there is no leakage from other instruments. I usually prefer to maintain total isolation between the two sources, placing the guitarist and amp in separate rooms. But for some production styles, the acoustic air mic can also do double duty as a distant room mic for the amp, with the ratio of pick sound to ambience determined by mic placement and amp volume. I've recorded some very hefty-sounding rock 'n' roll power chording this way, as well as a variety of vintage-style solos and rhythm parts. At the board, a low shelving or low-midrange EQ cut, combined with a subtle high-end boost around 4 to 6 kHz, will usually help these tracks jump out of the mix.
These handpicked guitars represent the very highest-end when it comes to collector-grade, vintage instruments. Take a look at these stunning, investment-level guitars and basses from the golden eras of Fender, Gibson, Gretsch, Martin, Rickenbacker and more. These stunning specimens are the things of gearhead dreams, and even if you can't afford one today, there's still plenty of fun to be had perusing and exploring these iconic guitars.
As a conservative approach to using steel string, one thing is pretty much for sure; if a Martin came from the factory with a Belly bridge, it is braced for steel strings. If it has a rectangle bridge (and was made before 1929), the bracing needs to be checked by a qualified repair person to determine if the guitar's bracing can handle steel strings. My personal opinion is if it's a style 18 or higher and has a rectangle bridge and was made before 1930, it's not really made for steel strings. Though 1927 is generally thought of as the year when most models were braced for steel strings, 1927-1929 models could be braced for either steel or gut strings. So before putting on steel strings on a 1927-1929 Martin, have it check out by a good repair person. They will check the top's firmness, bracing dimensions, and bridge plate thickness.
The common design of a standalone stompbox is simple and, thus, hasn’t changed much: The guitar lead plugs into an input while a second lead carries the output to the amplifier. In between, a multitude of knobs, switches, and pedals modify the signal. To connect two or more boxes requires “jumper” leads, which chain the boxes together to complete a circuit of circuits, each one powered by a 9V battery. Typically, stompboxes are activated by “stomping” on an on/off bypass switch. This simple design enables tinkering: The exterior casing can be easily removed, exposing the interior for modification. To do so requires only a basic grasp of electronics, solder tools (or a solder-less breadboard circuit), and patience. Lots of patience.
In the 1970s and 1980s, with jazz-rock fusion guitar playing, jazz guitarists incorporated rock guitar soloing approaches, such as riff-based soloing and usage of pentatonic and blues scale patterns. Some guitarists used Jimi Hendrix-influenced distortion and wah-wah effects to get a sustained, heavy tone, or even used rapid-fire guitar shredding techniques, such as tapping and tremolo bar bending. Guitarist Al Di Meola, who started his career with Return to Forever in 1974, was one of the first guitarists to perform in a "shred" style, a technique later used in rock and heavy metal playing. Di Meola used alternate-picking to perform very rapid sequences of notes in his solos.
The full-size guitar in black by DirectlyCheap should therefore be on your list for consideration. Made out of linden, basswood and catalpa with a particularly ornate inlay around the sound hole, this model has a really lovely sound for the price. Just keep in mind that, like other guitar shipments, when you receive the guitar, you will have to “set up” the neck. If you need help with this, a guitar tech will assist.
Early proponents of the electric guitar on record include Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Eddie Durham, Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra), Tampa Red, Memphis Minnie, and Arthur Crudup. According to jazz historian James Lincoln Collier, Floyd Smith can be credited as the first person to rig up an amplified guitar. According to Collier, "Floyd's Guitar Blues" may be the first important use of the electric guitar on record.[17]