By 1941, much of the pre-war Supro line had disappeared, to be replaced with what would eventually turn out to be a good portion – and look – of the post-war Supro line. Gone were the Supro Avalon Spanish, the acoustic resonators and the nifty amp-in-cases. The Supro Avalon Hawaiian was gone, in name, though its spirit was directly inherited by another lap, the Clipper. Also gone were the mated pickups in favor of a more traditional design with exposed polepieces. These with some variations, would prevail for the next decade or more.
In the 21st century, European avant garde composers like Richard Barrett, Fausto Romitelli, Peter Ablinger, Bernhard Lang, Claude Ledoux and Karlheinz Essl have used the electric guitar (together with extended playing techniques) in solo pieces or ensemble works. Probably the most ambitious and perhaps significant work to date is Ingwe (2003–2009) by Georges Lentz (written for Australian guitarist Zane Banks), a 60-minute work for solo electric guitar, exploring that composer's existential struggles and taking the instrument into realms previously unknown in a concert music setting.
What’s the point in having these lists anyway? There’s always going to be anger over people who were left out/included on the list when they didn’t deserve to be… And to say that any of the musicians mentioned so far aren’t talented is ridiculous, there’s no limit in the world on how much talent there is, so why does this list have to be limited to 10? Just saying…

There are many, many variations of the electric guitar. Science has told us that in order for sound to be naturally amplified, there needs to be a chamber in which sound can resonate. Just look at the construction of the ancient amphitheaters, or the way that the human body has natural resonating chambers that allow us to use our voices, or a stand up bass, with its large, chambered body designed to amplify the resonating strings.
Before I start, I want to mention a few things about this particular guitar. It looks and (potentially) sounds great. The neck plays well too, but it has some tuning problems and buzzes a bit more than I’d like. The tuning problems are coming from two areas. Firstly the nut slots are too tight, made evident by the strings making a pinging noise when they are tuned up or down. This means that it is difficult to fine tune, as the string’s pitch tends to “jump” up or down. The second reason for the tuning issues is that the intonation is way out. By that I mean that the saddles’ forwards/backwards positions are not set up well, and so when the open strings are correctly tuned, and we then play up the neck, it suddenly seems out of tune again.
Deco Tape Saturation & Doubletracker is a unique effects pedal that allows for a wide variety of tonal possibilities.  You can place Deco near the beginning of your signal chain and use the Tape Saturation as a light overdrive.  Or, you can place Deco at the end of your chain, use lower Tape Saturation settings, and provide your entire signal with the tape-like warmth, compression, and added low end harmonics.
I'm going to break this review into pros and cons. Pros: Top notch wood, electronics, wonderful bound neck and great machine heads. The action/fretboard are wonderful (after being setup). Sounds beautiful!, and more so if you take my advice. One last pro, all of the cons are easily remedied. Cons: The saddle, nut, and bridge pins are plastic (kind of like putting crap tires on a good sports car). I replaced the saddle and nut with tusk, and for the bridge pins I went with brass. It was like the volume went from a 4 to a 8, and the tone went from nice to beautiful and singing. It was about a 40$ upgrade, that made it sound like a thousand dollar guitar. This is the first time I bought a guitar before playing it. The gamble more than paid off. Been playing guitar for 25 years, and I
The D-55 is Guild's dreadnought, very similar in shape to the all-conquering 14-fret Martin on which it's based. However, if your used to a handful in the neck, the D-55 dreadnought makes for quite the contrast: a gloss neck, and slimmer nut accentuating the neck's overall thinness; more a D than a C profile, to invite comfortable first-position chords, aided by an impressively low action. That Adirondack bracing is doing its job, too, because string separation, definition and dynamic range are all notable and it feels loud, alive and resonant when playing soft or hard. If this guitar is anything to go by, the latest Traditional models are absolutely up there with the other big American names, offering superb quality craftsmanship and world-class tone. The D-55 is a potentially serious workhorse that has every likelihood of outlasting and outperforming any one of us as long as we can keep on picking - a sumptuous strummer.
We received a quote so promptly and after already seeing so many other rates in the DFW area, I knew instantly that this was the best value. My 8 year old son is shy and even though he was super interested in learning how to play the guitar, I worried that he’d have a hard time connecting with whoever we chose. After about 5 minutes into the lesson, that fear was long gone. Jack was awesome with him and very patient. He showed up right on time which was great because any parent knows that adding one more thing to an already busy schedule isn’t always the easiest thing to do. Great experience so far!
Native Instruments Guitar Rig VST plugin offers a free collection of various rack stacks that lets us try out typical effects setups of recent years. It can run in a DAW host or as a standalone. Do a Web search for "best amp synth" and you'll find more about what's happening with amp emulators -- along with maybe a link back to the excellent recommendations found in this thread.

Now, for most players, deciding what should go where on a signal chain simply came through trial and error along with a good dose of common knowledge. And while a player’s signal chain should be his or her own, those of you out there new to creating a solid signal chain can benefit from some of the general 'rule of thumb' type of advice that can get you started in the right direction.
Speakers and speaker stacks are a necessary partner for standalone amplifier heads. Take the total power level into account when you're looking at speakers, ensuring you're getting a stack with the muscle you need for the venues you play. Speaker configuration is also important, with larger woofers delivering more powerful bass and smaller tweeters bringing through the high-end.
There were at least three different versions of this guitar with differing knobs, fingerboards, control plates, cord mounting, and trim. One even had a nice rosewood fingerboard with dots. This version was the most monochromatic of the bunch, I suppose. It cleaned up really nicely for these pictures. Okay, so it's an ugly little spud. My wife describes this guitar as "so ugly it's cute," and she fell in love with it in the store for that reason. I like that.
ESP started life in Japan in 1975 as Electric Sound Products – a single store that provided replacements parts for guitars. These days they are a huge guitar manufacturer and a big name in heavy metal, having supplied guitars for Metallica, Megadeth, and Slayer, among others. ESP also own the subsidiary LTD, who produce low priced, entry-level versions of their guitars.
Also, if your slide playing includes any fretting at all, FORGET IT. While it certainly raises them well away from the neck, the strings are lifted to a height that makes trying to fret them pull them off pitch well before you reach the fret... and there is NO adjusting it. I used one on a wide neck 12 string strung for six. A neck designed for the tension of 12 strings easily takes the tension of a heavy gauge set in a raised open tuning. The "Slide Guitar Extension Nut" is ideal for such an application (if you don't want to even try any fretting) but I doubt Stewey Mac's sells very many of them.

After the lawsuit Hoshino Gakki abandoned the strategy of copying "classic" USA electric guitar designs and moved to the popular superstrat era in the mid-1980s. The newer Ibanez models began incorporating more modern elements into their design such as radical body shapes, slimmer necks, 2-octave fingerboards, slim pointed headstocks, higher-output electronics, humbucker/single-coil/humbucker pickups, locking tremolo bridges and different finishes.
A far cry from just another mass produced vintage looking guitar, the Kay Vintage Reissue Series successfully duplicates the original 50's models, within feel, playability and the legendary Kay sound. Complete with the company's gold chevron, flagship headstock design, displaying 3-D raised "Kel-von-a-tor" style emblem, to this day, the Kay Thin Twin Electric Guitar is probably one of the coolest looking guitars ever made.
I have a Les Paul Gold Top copy I bought new in the mid 70's. It has no brand name anywhere on it. I have done all the research I can and have found no conclusive results.I'm at a loss. It plays great! I do have pics. if that will help. Thanks for any help' It was bought in Montgomery Al. Clarence Carter's guitar player bought one while I was in the store so I figured ...must be a okay guitar. So I bought it. On the little square plate on the back it is hand engraved #0059. Thanks
Paul Kossoff, of Free and Back Street Crawler, favoured a 1959 Les Paul Standard. In 2011-12, Gibson’s Custom Shop made a reproduction of Kossoff’s Standard, featuring a so-called “green-lemon” flametop, two-piece carved maple top, mahogany body and neck, Custom Bucker humbucking pickups and kidney-bean shaped Grover tuners similar to those Kossoff had installed on the instrument. 100 Kossoff models were made to resemble the guitar at the time of Kossoff’s death in 1976, with another 250 in a VOS finish.
As with most chords in this list, a clear G major chord depends on curling your first finger so the open fourth string rings clearly. Strum all six strings. Sometimes, it makes sense to play a G major chord using your third finger on the sixth string, your second finger on the fifth string, and your fourth (pinky) finger on the first string. This fingering makes the move to a C major chord much easier.
Spanish-style electrics, which you could sling in front of you while standing and singing, proved to be much more versatile for many different musical genres. Gibson’s 1936 ES-150 (E for Electric and S for Spanish) had a sleek bar-shaped electronic pickup that was mounted into the guitar’s hollow body for a more streamlined look. The pickup earned the nickname “the Charlie Christian” thanks to the jazz virtuoso who is generally credited with introducing the electric guitar solo. In 1939, Christian stepped out in front of Benny Goodman’s band and performed long, complicated passages imitating the style of horn playing. He explained, “Guitar players have long needed a champion, someone to explain to the world that a guitarist is something more than a robot pluckin’ on a gadget to keep the rhythm going.”
The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. Many believe this design improves a guitar's sustain and timbre. A few examples of string-through body guitars are the Fender Telecaster Thinline, the Fender Telecaster Deluxe, the B.C. Rich IT Warlock and Mockingbird, and the Schecter Omen 6 and 7 series.

The remaining ’62 Teisco laps had a sort of paddle shape to the body, with sides wider than the fingerboard all the way up to the asymmetrical head with the circle Swan logo. The EG-A and EG-S had short scales and black fingerboards with the diamond markers, while the EG-U and EG-L had longer scales with fingerboards angled toward the bass side at the pickup. The EG-U had a light fingerboard with split-parallelogram markers, whereas the EG-L had a dark ‘board with dots. All were six-strings with one black-covered pickup and a little plate with volume and tone controls. Tuners mounted from behind the head as on a Spanish guitar.
Guitar Tuners lets you tune your guitar in seconds for free using a microphone so that you guarantee the perfect pitch of your instrument every time. Just play a note, and Guitar Tuners will display which note you''re playing, and how close you are to having that note in tune. The needle on this Guitar Tuner will turn blue you have an exact match. Just play each note on your guitar (E, A, D, G, B, E) or other musical instrument, and get in tune !
I love reading interviews with engineers and producers, but the more of them I read, the more I come up against the basic problem that my brain is like a sieve. I'm forever thinking to myself "I really must remember that technique", but unless I dash off and use it right away the knowledge just skips out of my ear and heads for the hills, probably glad to be free. And even if I vaguely remember reading a fascinating passage about de-essing nose-flutes, I'm damned if I can recall where I read it or who recommended it.
Nowadays, you can find many in-between sets, but you'll want to have a solid understanding of what the gauges are in terms of actual measurement and how they affect your ability to perform with your desired tone.  These relatively open descriptions will also differ from acoustic strings to electric strings, so your experience in handling many types of guitar strings and gauges is paramount in making the right choice.
Founded in 1976, Schecter Guitar Research started out by producing replacement parts for existing guitars of the era. They then took the production a step further by custom building guitars, and have grown steadily ever since. Today, Schecter is known for their extensive line of mass produced electric guitars, and their instruments are well received in the rock, punk and metal circles.

The pre-amplifier section of a guitar amplifier serves to amplify a weak instrument signal to a level that can drive the power amplifier. It often also contains circuitry to shape the tone of the instrument, including equalization and gain controls. Often multiple cascading gain/clipping stages are employed to generate distortion. Because the first component in a valve amplifier is a valve gain stage, the output level of the preceding elements of the signal chain has a strong influence on the distortion created by that stage. The output level of the guitar's pickups, the setting of the guitar's volume knob, how hard the strings are plucked, and the use of volume-boosting effects pedals can drive this stage harder and create more distortion.


Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.


What people may not know is that they have a very affordable line of entry-level guitars.  This line continues the legacy of craftsmanship and prestige that comes with owning a Taylor. Whether you look into their line of Baby Taylors – 3/4 sized guitars that play better than many full-sized budget guitars, or you look into their entry full-sized acoustics, Taylor will not disappoint you.


As discussed, Delay pedals add so much more weight to your sound and gives your guitar a doubling effect, which is really useful to make it sound like there’s two guitars on stage. They’re also great for creating psychedelic sounds and experimenting with riffs. Again, you don’t have to dial in big delay effects and can use the pedal subtly to add resonance.

Ovations reached the height of their popularity in the 1980s, where they were often seen during live performances by touring artists. Ovation guitars’ synthetic bowl-shaped back and early use (1971) of pre-amplifiers, onboard equalization and piezo pickups were particularly attractive to live acoustic musicians who constantly battled feedback problems from the high volumes needed in live venues.[citation needed]


 How to Order Custom Guitar: THIS IS A PRE-BUILD PRICING. You will receive the custom guitar exactly as pictured. Please make sure to choose the required options marked with the RED ( * ) asterisks and it will compute automatically the options you choose. We also offer Optional Upgrades but they are not required. And then once you hit on Buy Now button, go to the top most portion of the website and you can see a cart image logo and click on that then you can see VIEW CART and CHECKOUT to determine the total cost of the guitar including the shipping and the discount.
Native Instruments Guitar Rig VST plugin offers a free collection of various rack stacks that lets us try out typical effects setups of recent years. It can run in a DAW host or as a standalone. Do a Web search for "best amp synth" and you'll find more about what's happening with amp emulators -- along with maybe a link back to the excellent recommendations found in this thread.
Anytime a single coil-sized humbucker is split, a tiny coil is the one seeing the strings, so the volume is going to drop. You can split to the other coil, or set the switch to wire the pickup in parallel, which will keep it hum cancelling. However, splitting to the other coil in a neck position Cool Rails probably won’t be a big difference in sound since the coils are pretty close together and pretty small.

Although the G&L Legacy electric guitar was released one year after the passing of Leo Fender, it is designed to the specifications of the original Stratocaster but with a few modern features specific to G&L instruments. The Legacy included, for instance, G&L's Dual Fulcrum vibrato and Schaller tuners and was available in a combination of different tonewoods. Even if the G&L guitars from before Leo Fender's death are more collectable, the Legacy electric guitar is still considered a high-quality instrument.
Different types of guitars have different sound aesthetics, e.g. different colour-spectrum characteristics (the way the sound energy is spread in the fundamental frequency and the overtones), different response, etc. These differences are due to differences in construction; for example modern classical guitars usually use a different bracing (fan-bracing) from that used in earlier guitars (they had ladder-bracing); and a different voicing was used by the luthier.

The GK Studio mixes traditional flamenco construction techniques, a comfortable body shape and modern Fishman electronics, resulting in an easy to play nylon-string guitar that can be plugged in for stage use. My main concern about this guitar is its slightly thinner body depth, neck and nutwidth(1.96"), but these are calculated tweaks that should make this classical guitar play and feel more akin to conventional steel-string acoustics.
When Martin turned to jobbers rather than direct sales, more variation in cases took place. Depending on what part of the country you bought your Martin, the jobber would supply a similar range of cases - chipboard, hardshell, or deluxe hardshell, from the case manufacturer of their choice. So cases on old Martins can vary greatly. This changed in 1972 with the blue thermoplastic case which was included with the sale of all new Martins.
Playability and tone are two of its most commended traits. Many describe its neck as very easy on the hands, while others describe the overall playing experience to be better than their other acoustic guitars. The TK-40D preamp gets a lot of nod from users who want to fine tune their amplified sound, while there are also many who are satisfied with its acoustic sound.

Another popular modification is to reverse the electric polarity of one of the pickups (or one coil of a dual-coil pickup). When two pickups are selected, this produces a very thin and weak sound, due to phase cancellation between the pickups.[21] The closer the pickups are to each other, the greater the cancellation and thus the weaker and thinner the resulting sound. In case of a humbucker this results in a sound that is so weak as to be almost unusable, as well as the loss of the pickup's hum-cancelling properties (due to the coils being magnetically out-of-phase, but electrically in-phase with each other).[22]


Your guitar is a model H1213 Archtone made in 1963. Harmony did a great job of stamping model numbers and dates of manufacture on their guitars, but they often require some decoding. The F-63-HB is the date code and the two numbers, not surprisingly, indicate 1963. The “F” preceding the year was often thought to be a fall production indicator while the other letter stamp they would use was an “S,” which researchers thought stood for a spring production instrument. However, a former Harmony employee notified a Harmony database website that it is more likely an “F” stands for “first” and “S” stands for “second.” He explained that Harmony would shut the factory down for two weeks in July and that guitars produced before this break were stamped “F,” while guitars produced after were stamped “S.” The H1213 is the model number as indicated in Harmony’s catalogs and literature. The “3714” is the serial number of your guitar, but little information has been uncovered as to what this series of numbers represents. More than likely, it was a consecutive production number of that particular model for either the first or second half of the year.
According to Longworth, Martin began to use built-in Schaller Straploks beginning with guitar #2085. However, the example shown here is #1034, the thirty-fourth made if #1000 was indeed the first, and it has the Schaller Straploks, which are original. Pot dates are late 1978, confirming that it’s probably one of the early examples. The serial number on #1034, by the way, was printed on a piece of tape in the cavity under the neck pickup. The control cavity had “EM-18” stamped in it.
{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}

WARTUNG Herzlichen Glückwunsch und vielen Dank dafür, dass Sie sich für ein Produkt von Ibanez entschieden haben. Ibanez legt bei seinen Produkten die höchsten Standards an. Alle Ibanez- Instrumente werden vor der Auslieferung unserer strengen Qualitätskontrolle unterzogen. In dieser Anleitung wollen wir beschreiben, wie Sie das Äußere Ihres Instruments pflegen und Ihre Gitarre in dem Zustand halten, wie sie bei Auslieferung ab Werk war.


By and large, time-based effects split the guitar output into two identical signals and momentarily hold one back while allowing the other to play in real time. The two signals are mixed back into one at the output. Usually you can control the length of the delay and the amount of the signal that is affected versus the part that stays "dry" (unaffected). This latter control—found on most effects—is usually called the level control.

Hello. If any of you who have a dorado guitar would like to sell it, please email me (swiver84@hotmail.com). I am always looking for cool vintage guitars. I am a big fan of the Gretsch name and have found the Dorados to be very nice guitars. I don't check follow ups much, so you'll have to email to get in touch with me. Put "Dorado" in the subject because I get a lot of spam and tend to get crazy with the delete button. Thanks :)

That would work, of course, but the result would be very different. You’d have minimum cut in the center position, with treble cuts of differing size in either direction, depending on the caps’ values. I’m not sure that would be particularly useful — the activity would be the same in either direction up to the point where the value of the greater cap kicks in. (I suppose one advantage would be that you could leap quickly to two “preset” values by turning the pot to minimum or maximum, as if you’d installed to caps on a DPDT switch, as seen here.) Or course, you’d have to worry about centering the pot, unless you could can find a part with a center detente. The resonant peaks, and therefore the overall tone, differ from standard. HOW exactly they differ is one of the things that I’m going to explore. 🙂


On Thursday, mere days after launching a news site for women called the Lily, the Washington Post published a story by Geoff Edgers that mused on the supposed death of the electric guitar. Sales are down at places like Sam Ash and Guitar Center, big guitar makers like Fender and Gibson have seen their revenues decline, and in 2010, acoustic guitars began to outsell electric guitars. Why? According to the piece, it’s because male guitar heroes are dying off and aspiring musicians have no men to look up to. Sad!
With Apple including their Guitar Amp Pro plug‑in in Logic, Sonar coming bundled with Native Instruments' Guitar Rig, and Ableton adding their new Overdrive plug‑in to Live, guitar‑slinging Cubase 5 users might initially feel a bit left out. But you don't have to, because you can assemble some pretty amazing 'guitar racks' in Cubase: it's just that Cubase takes a more à la carte approach, where you need to draw on the existing effects as if they were stomp-boxes. A VST audio channel in Cubase offers inserts for up to eight series effects, including an amp simulator, so you actually have more options than with many pedalboard setups. Furthermore, you can add some quality 'studio effects', like the new Reverence reverb, as send effects. So think of Cubase as 'virtualising' a pedalboard, then bringing it into the studio so that its output can go to studio rack processors.
Theory - These sessions will be devoted to investigating how the fretboard works, how strings and notes relate to each other, what chords are made up of etc. A lot of theory time will be spent reading and analysing diagrams and your guitar's fretboard. This aspect is for understanding how music works on the guitar, to map out the fretboard in your mind so you can later apply the physical techniques with confidence. If you're serious about getting good on guitar, you need time devoted to theory.

For example, Pat Metheny took his Gibson ES-175 and ran it through some lush chorus, delays, and compression to create his signature jazz sound. On the flipside, John McLaughlin plugged his guitar into a Marshall stack for the wild rock tones heard on records with Tony Williams Lifetime and Miles Davis. In fact, Joe Perry of Aerosmith plays a Gretsch Falcon. The hardest thing to do when playing a hollow body guitar through a loud amp, or a hollow body with a dollop of distortion, is not to get bowled over with feedback. Either way, these guitars are celebrated for their big, full sounds, and can be applied to many musical situations.
One of the biggest hits of all-time, this song incorporates everything that is 80’s pop and is performed in the key of F# major, in 4/4 time. Lauper originally didn’t want to sing it since the original version was written by Robert Hazard, who wrote it from the perspective of a man. Eventually, the singer released her version of the song and the rest is history. 
At this time (and for a while now) the best guitars are made in Japan and Korea. However Japanese guitars carry a premium which you don’t find to the same degree on Korean guitars. So Korean guitars will offer the best value and quality for price. There is a Cort factory in Korea, however 1) The Korean Cort factory also makes entry level guitars and 2) Cort also have other factories in other countries which have much lower standards. There are some good/excellent Cort guitars but there are also many bad ones with shoddy workmanship. So Cort as a brand name isn’t enough to guarantee a well made instrument - you also need to check it’s made in Korea, and also that it’s one of the better models (price will probably be a guide). All the brands made at the largest factory, the World Instrument Co. one (which makes PRS SE and Chapman guitars among others) are built to a very high standard.
Finally moving over to the flipside, there is a certain issue with the amplifier which I’m not quite able to understand. Don’t get me wrong, it is a very good 10 Amp Amplifier from Hollinger, but somehow you get this buzzing noise when you set it in full volume. At a lower volume however, it sounds just fine. Even the distortion button works well, and helps you work up some pretty cool effects. All other accessories work fine, and aid your growth as a fresh learner.
Maybe the most well known amplifier released under the Peavey name, the 5150 is the result of a collaboration between Peavey and Eddie Van Halen. Debuting in 1992, the 120-watt, all-tube, two-channel head featured a searing lead channel that helped usher in a new wave of high-gain guitar ferocity in the early Nineties. Since Van Halen and Peavey parted ways in 2004, the model name was changed to the Peavey 6505 and has become an industry standard for modern metal bands such as Chimaira, August Burns Red, All That Remains and others.
SHAPING THE BODY This is totaly up to you. You can carve down the body however you want. For my project I chose to carve down the body as close to the way the guitar I was modeling it after was. I used a verity of different sanders. I used a belt sander for the arm contour on the top back of the guitar, a dremmel tool with a sanding attachment for the small carve down under the neck, a 6" sanding disk attachment on my drill for the body contour on the back of the guitar, and a Black and Decker mouse sander for the neck area and smoothe down of all the other areas that had previously been carved. One rule of thumb is to only sand with a 220 grit when carving the body down. This will prevent any deep scratches any lower grit will cause. Don't use any electric sander on the falt parts of the guitar either, like the top or the back. Use a 220 grit paper with a sanding block to smooth out those areas. You can also run a slightly dampened cloth along the surface of the body and let dry before the final hand sanding. This will raise the small grains in the wood so they can be cut by the paper easier. Sand in the direction of the grain.
Martin never actually produced Stinger catalogs, so a detailed accounting is pretty difficult. However, there were four basic Stinger body styles, a fairly conventional Strat shape, a Strat-style with an arched top, a Tele and a Fender-style bass. These came in a variety of finish and pickup configuration options. Headstocks were a kind of modified Strat-style six-in-line, with a pointed throat and slightly hooked nose, with a painted triangular Stinger logo running under the strings. All had bolt-on maple necks. Guitars had a 25.4″ scale, while the basses were 34″ers.
1960's Harmony H-54 Rocket 2 Redburst- Here's another excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. There's just limited amount of wear on tips of headstock with a amlost perfect back. Two great sounding DeArmond Gold Foil Pickups power this baby. Guitar has a 4 bolt neck which was the better neck from Harmony. It's all original, except for the pick guard, which no one can detect. Condition excellent for this great 50 year old beauty. SOLD
Guitar picks are really cheap, maybe $.25 to $.50 each. The best way to know which kind you like best is go to a music store and buy $5.00 worth of picks of different thicknesses, sizes and materials, take them home and try them out over the course of the next several weeks or months as you learn to play. There is no right or wrong answer to this question, its all a matter of personal preference. You'll figure out for yourself which you like best.
Guitar pedals are perfect for this. Firstly, and perhaps most importantly, because you should never try to circuit bend anything mains-powered, they can run off 9V batteries. Secondly, their internal circuitry is usually very simple, and they already have audio I/O. Thirdly, you can get them for almost no money from eBay, and the other tools required — soldering iron, wire, switches, and so on — are also very cheap. There's an almost infinite number of sonic possibilities to be explored here, from finding new ways to process a signal (of course you don't just have to use them with guitars) to creating a machine that goes 'Eeeeeeooooowsquelch blipipipip' in a different way every time you turn it on — and who would say no to that for less than a tenner?
Two more guitars were introduced in 2008. Gibson USA issued the Slash Signature Les Paul Goldtop, modeled after a 1991 Gibson Les Paul Goldtop that was stolen from Slash’s collection in 1999 and never recovered.[37] It features a mahogany body and a hand-carved maple top with Gibson’s classic Bullion Gold finish. Production was limited to 1000.[38] Epiphone introduced a more affordable version of the Gibson model, featuring a traditional Les Paul body with a maple top, a mahogany neck with rosewood fingerboard, and Epiphone’s classic Goldtop finish. Production was limited to 2000.[39]
A third product which does not fit into the "combo"/"head"/cabinet categorization are powered speaker cabinets designed for use with bass instruments. While these powered speakers share many features with a regular combo amp, a bassist cannot plug her bass directly into a powered speaker cab. The powered speaker system is designed to operate as a "slave" to another amplifier's unpowered signal (or another combo amp which has a pre-amp out jack). Some powered speaker cabs only accept a "link" XLR cable from the main amp. Some powered speaker cabinets are designed as part of a company's line of bass amps; as such, the colour of the cabinet and its grille match the combo amp which will be placed on top of the powered speaker. As well, the powered speaker may have interlocking corners to ensure that the main amp stays put on top of the powered speaker.

After the lawsuit Hoshino Gakki abandoned the strategy of copying "classic" USA electric guitar designs and moved to the popular superstrat era in the mid-1980s. The newer Ibanez models began incorporating more modern elements into their design such as radical body shapes, slimmer necks, 2-octave fingerboards, slim pointed headstocks, higher-output electronics, humbucker/single-coil/humbucker pickups, locking tremolo bridges and different finishes.


Here we have a very nice example of the Yamaha Red Label fg230-12... This example is in very good - excellent original condition. The woods used on this guitar are of a very high grade ... spruce top, Honduran Mahogany back, sides and neck please see pics for the details but very nicely grained woods!... workmanship is impeccable... the guitar plays like a real with very good action and the intonation is set dead on... The neck is solid Mahogany and is slightly beefy..I love the feel of this guitar and when you hear is you will be in 12 string heaven... no cracks or repairs ... the condition is vintage used its about 40+ years old you know ...with several minimal scratches but still overall a very beautiful vintage guitar. The wood has aged and mellowed with time to yield a wonderful rich tone only a 30+ year old quality instrument can offer. This one has that quaity rich sound along with the playability with the right aging now and with its beauty ...its a no brainier... Also available is a cool $100 vintage hard shell case see pics Thanks for your interest!.
A looper pedal or "phrase looper" allows a performer to record and later replay a phrase or passage from a song. Loops can be created on the spot during a performance or they can be pre-recorded. Some units allow a performer to layer multiple loops. The first loop effects were created with reel-to-reel tape using a tape loop. High-end boutique tape loop effects are still used by some studios who want a vintage sound. Digital loop effects recreate this effect using an electronic memory.
The Blues Junior's compact dimensions, light weight and pedal-friendly credentials have made it one of the most popular gigging combos in the world, but for 2018, Fender has updated it to the new Mark IV specification, which features various tweaks, including Celestion’s excellent A-Type loudspeaker. Controls include gain, bass treble and middle, reverb level and master volume, with a small push-button ‘Fat’ switch. In use, the Junior unleashes a stunning range of Fender tones, from spanky, sparkling cleans, to fat and smooth midrange crunch that’s spot on for blues and classic rock. The Fat switch adds a generous midrange boost and can be remote-controlled from a footswitch for greater versatility, while the improved reverb circuit is very impressive, with no noise and a smooth, warm delay that feels more integral to the overall amp tone, harking back to the best blackface reverbs of the 1960s. No matter what guitar you use, the Blues Junior flatters single coils and humbuckers alike, not to mention drive pedals with plenty of volume. The sounds are top-drawer, comparing well against many so-called boutique amps costing four times the price. Factor in the compact dimensions and light weight, and it’s easy to see why the Blues Junior remains a firm favourite.
Our very first impression of the American Special Telecaster was that it’s such a good guitar. There is just something about it that feels remarkable. It’s hard to point to one particular thing, what does it is the combination of design, sound and feeling. We love the alder body and the maple neck that makes your music sound great, and the Texas Special pickups make everything we play on this guitar sound amazing.
For instance, the guitars that have a solid body are the most numerous out there. These models are as sturdy as they come, but they do not offer one plenty of resonance and sustainability. If you are interested in a design that mimics the figure of acoustic units, then you should pay attention to those guitars that have a hollow body. These products are able to deliver plenty of resonance, but they might not be of great help when it comes to feedback.

Guitar pedals and other effects, including an early version of the wah-wah pedal used by Jimi Hendrix and the Tone Bender fuzzbox pedal, a Vox variation on the famous original Gary Hurst Tone Bender (used by Jimmy Page of Led Zeppelin and Jeff Beck of the Yardbirds as well as The Beatles, Spencer Davis and others), were also marketed by Vox and later on manufactured in Italy.

1979 Alvarez 5053 - D-45 Martin Style Replica Japan Crafted Exotic Brazilian Jacaranda Rosewood Here we have a really great one from our 30 years of Alvarez collecting and she is absolutely one of the finest Alvarez model Martin Copies crafted in Japan from this golden era the late 1970's.. This example is a 1979 #5053.. its ALL ORIGINAL with the only exceptions being we changed the old cheap tone defeating plastic nut & saddle for the preferable upgrade to a Martin bone nut & compensated saddle set and of course the Martin Marquis 80/20 Phosphorus bronze strings 12’s strings along with the Martin Bridge pins as seen. This is a unique & exotic true Vintage Japanese version of the classic ornate Martin D-45 again this one was Crafted in Japan by one of the finest acoustic instrument builders from this time period Alvarez, This guitar is possibly even a bit more fancy than even the actual Martin D-45 with the intricate exotic woods used see this examples exotic Beautiful 3-piece back simply gorgeous! The Martin D-45 version just has a 2-piece back in most cases...This example is a RARE Alvarez with such woods and its workmanship level is very ghigh suggesting a master luthiers hand its model #5053, with the date stamped inside on the label reads ( 1979 ).,,see pic detail. Bound body(front w/b/w/b/w/b/w, back w/b/w/b),bound neck(white),bound peg head(w/b/w). See the Beautiful detailed Abalone inlay around the sound hole with its white mother of pearl fret markers. With an adjustable Ebony bridge with a bone saddle and the sweet smelling Brazilian Jacaranda Rosewood fretboard its simply stunning. Special truss rod cover that has the word Alvarez in gold lettering and SLM (Saint Louis Music)in gold also. Medallion on the back of the headstock says imported and customized Saint Louis Music since 1922. Choice Sitka AAA Spruce top, with old highly exotic looking Jacaranda Brazilian Rosewood - awesome landscape figure sides are very figured exotic looking Jacaranda. Smells great. Wonderful exotic figuring. for the back and sides Better looking we haven’y seen...The Perfling between the woods on the back is just absolutely stunningly gorgeous,unbelievable craftsmanship!!. I've only seen one other like it. Real difficult to find much info on these rare exotics. A truly Beautiful vintage Japanese acoustic guitar and quite the collectible instrument ...for the person wanting only the best at a fair price...not on sale for $6,000-8000 like the Martin this one is a true bargain Vintage exotic WoW! What a great find. JVG Rated at a solid 8.8/10 very good original Vintage condition. I suggest you get his before she's gone..don't know when I'll find another like it. .

That hand-built prototype, an anonymous white guitar, had most of the features of what would become the Telecaster. It was designed in the spirit of the solid-body Hawaiian guitars manufactured by Rickenbacker – small, simple units made of Bakelite and aluminum with the parts bolted together—but with wooden construction. (Rickenbacker, then spelled ‘Rickenbacher,’ also offered a solid Bakelite-bodied electric Spanish guitar in 1935 that seemed to presage details of Fender’s design.)
Jump up ^ Miller, Jim (1980). The Rolling Stone illustrated history of rock & roll. New York: Rolling Stone. ISBN 0394513223. Retrieved 5 July 2012. Black country bluesmen made raw, heavily amplified boogie records of their own, especially in Memphis, where guitarists like Joe Hill Louis, Willie Johnson (with the early Howlin' Wolf band) and Pat Hare (with Little Junior Parker) played driving rhythms and scorching, distorted solos that might be counted the distant ancestors of heavy metal.
The Epiphone ES-335 Dot was the world's first semi-hollowbody electric guitar, introduced in 1958. Today, it's made by Gibson, but it is still prized by jazz and blues musicians looking for a classic sound. Setting up the Dot involves adjusting the truss rod to correct for any underbowing or overbowing of the neck because of humidity changes. The bridge saddle on the Dot may also be adjusted to get the right distance between the string and the fretboard, called the “action.”
Two and one half steps down from Drop D. This tuning is most often used by death metal or deathcore musicians, such as Suicide Silence or Whitechapel (both use seven-string guitars and tune down the seventh string a full step). Utilized by bands like Nile, Motograter, Thrice, Filter (on the songs "Columind" and "The Missing" from The Amalgamut and "Drug Boy" and "The Trouble with Angels" from the album of the same name), Dead by April, RED, Ill Niño (on Dead New World) and occasionally Slipknot, Crowbar, Amon Amarth, Five Finger Death Punch, and Parkway Drive. Trapt uses this tuning on their songs "Hollow Man" and "Waiting".

Players and rock historians alike will talk endlessly about who either created or discovered or recorded the first distorted guitar tone. They argue, pontificate, debate, and even break it down into categories of type and of geographical location. “So, do we mean distortion, overdrive, or fuzz tone?” or “Do you distinguish between North American and European ‘firsts’?” Dave Davies of the Kinks is often credited with the first appearance of a heavily distorted electric guitar sound in the British charts for ‘You Really Got Me’ in August 1964.
The third technique I would like to talk about today consists in, once again, doubling a distorted, or not, guitar sound with a...folk guitar. This will give you much more definition and sustain on arpeggios, while on rhythm guitars it will allow you to highlight the sound's percussive aspect, and on power chords it will make your sound more powerful. This production technique has been around for ages (Led Zeppelin was pretty fond of it, for instance). But this doesn't mean that it's an outdated trick and it can't be used on modern productions: lots of contemporary metal bands still use it nowadays.
What can you expect from a shop whose exterior is painted in Eddie Van Halen stripes? Everything! Their selection of pedals was astounding. One of the largest selections I've come across in any store. I left having bought about a dozen things. Dangerous place! They are obviously a big dealer in PRS guitars because they had a nice selection of the USA made guitars. The Guitar Store represents Seattle right with an awesome staff and a vast selection of great guitars. With an ongoing series of in-store events and appearances by notable musicians, there is always a reason to stop in. Last year the shop hosted a monthly "build your own pedal" workshop--how cool is that?

Although Orbison’s good friend and Sun Records labelmate Johnny Cash may be known as “the Man in Black,” Orbison habitually dressed from head to toe in black in the early Sixties, a decade before Cash adopted his dark uniform. Even Orbison’s raven hair and impenetrable jet Ray-Bans were blacker than the cover to Spinal Tap’s Smell the Glove, adding to his alluring persona as a mysterious, brooding artiste.


ARM-SAITENLAGE Die Tremoloarm-Saitenlage kann eingestellt werden, indem 3,0 mm großer Inbusschlüssel an der Schraube (B) an der Tremoloschraube verwendet wird. FEIN-TUNING Auch nach dem Verriegeln der Verriegelungsmutter können Sie die Fein-Tuner verwenden, um Feinabstimmungen zur Stimmung jeder Saite vorzunehmen. Sie müssen alle Fein-Tuner (C) auf Mittenposition des Einstellbereichs stellen, bevor Sie die Verriegelungsmutter festziehen.

A closer look at a 1981 Gibson Victory MV-II electric guitar. The Gibson Victory MV, or 'Multi-Voice' guitars had very wide tonal palettes; with coil-tapped humbuckers they could produce typical Gibson tones, but were also designed to 'out-Fender' Fender. Two models were launched in the summer of 1981. Whilst the MVX, was designed to do everything a Stratocaster could do, the MVII was 'primarily for the discerning country player' - placing it squarely against the Telecaster.
What you need is some basic knowledge about the physics of audio (most of which you can learn by dropping a pebble in a puddle of water), and some pretty basic and inexpensive equipment. This is especially true for recording the electric guitar. Trust me--if it were brain surgery, I would have become a brain surgeon and made my mother a much happier woman. And while I have the opportunity . . . for all you kids who want to grow up to be recording engineers--don't do it. Become brain surgeons. They make a lot more money, drive nicer cars, and never have to worry about where their next gig is coming from.

There are different ways to play electric guitar. One is to just play the electric guitar, and to take it as it is. Another way is to play the guitar as a sort of synthesizer. With the right effects (delay, reverb, volume swells, added octaves), no one would even know that it was a guitar. Neither way is wrong, but we refer to both as "playing electric guitar" even though they're being used in completely different ways that may as well be different instruments. Drama ensues.
One of the first solid-body guitars was invented by Les Paul, though Gibson did not present their Les Paul guitar prototypes to the public as they did not believe it would catch on. The first mass-produced solid-body guitar was Fender's Broadcaster (later renamed the Telecaster) first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster. Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and comfortable ergonomics.
×