Gibson has produced three Jimmy Page signature models. The first was issued in the mid-1990s. It was based on a stock Les Paul Standard of the time (rather than the more prestigious and historically correct 1958/1959 re-issues issued by the Gibson Custom Shop). The modifications were based on Jimmy Page‘s “#2” 1959 Les Paul, which had been modified with push-pull potentiometers on all four control knobs, as well as mini push-pull switches under the pickguard. This first version of the Jimmy Page Signature did not have the mini-switches under the pickguard, nor did it replicate the custom-shaved neck profile of Jimmy Page’s guitar, but it did include the four push-pull pots. With all four pots pushed down, the guitar operated as normal. Pulling up the volume pot for the Bridge or Neck pickup turned the respective pickup into a single coil, rather than humbucking pickup. Pulling up the tone pot for the Neck pickup changed Bridge & Neck pickups wiring from series (stock) to parallel. Pulling up the tone pot for the Bridge pickup put Bridge & Neck pickups out of phase with each other. The first iteration of the Jimmy Page Signature utilized Gibson’s then-current high-output humbuckers: a 496R in the neck position and a 498T at the bridge.
TAB uses a series of hyphens to represent the strings. Each string is identified on the far left by the name of the note produced when played open. The high-e (string 1) is at the top; low-E (string 6) is at the bottom. There is no restriction for how long a line of TAB can be, but for readability it should be kept short enough to prevent wrapping on a web-site or printed page.
Benefits of this system are fairly obvious. You get to choose which source to use based on the venue you are playing at. Let's say the stage you are about to perform on has a number of large monitors pointed directly at you. In that case, you'd definitely want to stick with a piezoelectric pickup. On the other hand, if there are no monitors around, you can use both or only the microphone. Alternatively you can mike your acoustic guitar with external mics, which is great in isolated situations such as a recording studio.
Volume pedals are volume potientiometers set into a rocking foot treadle, so that the volume of the bass guitar can be changed by the foot. Compression pedals affect the dynamics (volume levels) of a bass signal by subtly increasing the volume of quiet notes and reducing the volume of loud notes, which smooths out or "compresses" the overall sound. Limiters, which are similar to compressors, prevent the upper volume levels (peaks) of notes from getting too loud, which can damage speakers. Noise gates remove hums and hisses that occur with distortion pedals, vintage pedals, and some electric basses.

Our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod. You may bring your brand new guitar in your Local Guitar Shop for proper setup and adjustment of the truss rod.
After the lawsuit Hoshino Gakki abandoned the strategy of copying "classic" USA electric guitar designs and moved to the popular superstrat era in the mid-1980s. The newer Ibanez models began incorporating more modern elements into their design such as radical body shapes, slimmer necks, 2-octave fingerboards, slim pointed headstocks, higher-output electronics, humbucker/single-coil/humbucker pickups, locking tremolo bridges and different finishes.

Originally designed by John Suhr and Bob Bradshaw (a legend in rack-gear rig building), it can be assumed that this machine was built with superior quality and a ton of tone in mind. Well, boy did it deliver all of that and then some! The first and only CAE rackmounted guitar preamp to ever have been produced was a 2-spacer, featuring 3 independent channels for clean, crunch, and lead. One of the notorious drawbacks with preamps has always been the loss of pick attack. However, the CAE never had this issue, providing a wealth of clarity through every channel, and even cleaning up when you rolled back the volume on your guitar to get those classic tones.
The EB-28 bass was very similar to the guitar in appointments and controls. It had a 22-fret ebony fingerboard, 33.825″ scale, a DiMarzio P-style neck pickup and a DiMarzio J-style pickup at the bridge. It, too, carried a Schaller bridge and Schaller M-4 tuners. Around 4,854 each of these 28 Series guitars and basses were built between January 1981 and February 1982.
As the text says, the pick wasn’t exactly identical with all the samples. This would make for the differences alone: The movement of the string must not be imagined as a plain two dimensional one. In fact it’s rotating in three dimensions, while the pickup only senses that part of the movement which is perpendicular to the deck of the guitar. The vibrations direction changes all the time and does so for each frequency component (read: harmonics) independently.
The Ovation Guitar Company, a holding ofKaman Music Corporation, which itself is owned byFender Musical Instruments Corporation, is a guitarmanufacturing company based in New Hartford, Connecticut. Ovation primarily manufactures steel-string acoustic guitars. They have been credited with “by far the most significant developments in the design and construction of acoustic guitars” from the 1960s through the 1980s.[
your right brian i been a acdc freak since u all been out in the early n mid 70s the greast band of all time. and i seen acdc 37 times through out the united states. i love my memories with the band and still watch and listen to the cds and dvds of the band. brian johnson is the best thing that happen to acdc since bond scott death. keep rockin guys i love u with a passion. mark
While tube technology is still considered state-of-the-art in countries where a potato is regarded as a square meal, these days solid-state and digital amps offer excellent tone for a lot fewer bucks, and with fewer maintenance headaches. However, tube tone is still considered the standard by many top players. Take a blind listening test, and let your ears be the judge.

In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.


I have a Montclair guitar, it sounds like I have an original but I have some questions. I purcahsed this quitar about 40 years ago. It is a dark brown archtop, with two cutaways and a pick guard like in the picture. On the top of neck the only says Montclair, strait across, and on the back it says "steel reinforced neck". On the inside the only number is L 6089.
What about Trey Anatasio? I cannot stand the hippie commune nonsense that follows Phish but that guy is amazing. That man can play anything; literally anything. He has been playing stuff like Peaches En Regalia to perfection live for literally decades. Go out to Grooveshark and find this song and list to it. He is playing sax and xylophone solos to perfection on the guitar. And that is just one example. There are literally hundreds of examples that you can find if you willing to look. Listen to the solo on Chalk Dust Torture off of A Live One. There is no better example of building tension in a solo then that right there.
My husband was looking forward to checking this place out. When we entered a guy wearing glasses asked if he could help us with anything and my husband said "oh just browsing." So we walked around some more. When we got to the electric guitar section, my husband saw a $2,000+ guitar he wanted to try. He took off his jacket so as not to scratch the guitar and SLOWLY picked the guitar from the wall hanger. The same guy earlier suddenly came up to my husband and said "You can't just pull it out like that!" My husband was surprised and had to ask what he just said?! I was as surprised. The clerk said "You can't just take it unless you are buying it." Really?! My husband said then you should have told me earlier when we first came in. We did not see any signs nor there's any lock on the guitar hanger. Why would you buy without trying it first?! That clerk probably thinks my husband don't have the money. They just lost a customer and a bunch of my husband's musician friends.
Replace components. From plugging in and unplugging my guitar so much, the stock input jack lost its grab. So I had an extra Radioshack one lying around, and I soldered it in. Now all my cords are held tight. I also had a problem(common with Teles as I understand it) with my input jack "cup" coming out with wires and all. Once you take a look at how it's held in there, it's an easy fix.
Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  250K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.

After the retirement of Kuhrmeyer in 1955, the company was taken over by Sidney M. Katz. The product line of Kay was shifted toward electric musical instruments on demands, and in 1964, the company moved to a new factory in Elk Grove Village, Illinois. In 1965 Katz sold Kay to Seeburg Corporation, and he became the head of Seeburg's musical instrument division. In 1967, Kay was resold and merged with Valco, but dissolved in 1968 due to financial problems.[9]


Another chord you come across every day, the E major chord is fairly straightforward to play. Make sure your first finger (holding down the first fret on the third string) is properly curled or the open second string won't ring properly. Strum all six strings. There are situations when it makes sense to reverse your second and third fingers when playing the E major chord. 

The kind of interface that you want should connect to your PC and the DAW (digital audio workstation) software installed on it so that you can record your playing. The Guitarport didn’t allow for recording without buying additional software that cost as much as the device; the device is essentially obsolete now but still supported. Years later I upgraded to their Toneport UX2, meant for recording and DAW compatibility. The accompanying Podfarm 2 software is quite good. The UX1 costs half as much with the same software if you don’t want or need 2 inputs (microphone or instrument). Presonus sells an interface that is quite popular, for less than $99
Not something you have to think about with an acoustic guitar, the electrics in an electro acoustic are quite important, though not as critical as with an electric guitar. You’ll want to make sure that you’re getting a good quality pickup and preamp, and then the next thing to consider will be features. Preamps often come with EQ adjustment to alter the tone slightly, and some will even come with certain effects that you can add on. Builtin tuners are a common addition too which mean you don’t need a separate tuning box.

The basic sound of the amplified electric bass or double bass can be modified by electronic bass effects. Since the bass typically plays an accompaniment, beat keeping role as a rhythm section instrument in many styles of music, preamplifiers ("preamps"), compression, limiters, and equalization (modifying the bass and treble frequencies) are the most widely used effect units for bass. The types of pedals commonly used for electric guitar (distortion, phaser, flanger, etc.) are less commonly used for bass, at least in bands or styles where the bassist mainly plays a rhythm section role. In styles of music where the bass is also used as a soloing instrument (certain genres of heavy metal, progressive rock and jazz fusion), bassists may use a wider range of effects units. Jazz fusion bassists who play fretless bass may use chorus effect and reverb for their solos.
Normal people define cool as laid-back, excellent or highly skilled, but most guitarists define cool as Jimmy Page circa 1975 in a black velvet bellbottom suit decorated with embroidered dragons, playing a Les Paul slung down to his knees. As the musical mastermind behind Led Zeppelin, one of the greatest rock bands of all time, Page elevated the guitar riff to an art form, crafting orchestrated overdubbed parts that bludgeoned listeners like the hammer of the gods.

Speaking of, you’ll probably look to upgrade either the bridge or the tuners at some point, because heavy whammy use will pretty quickly throw this out of tune. If you don’t use a whammy often, this makes a very fine choice, indeed. The neck is satin finished for better feel. All in all, a very worthwhile guitar that comes in at less than half the price of most of the other options on this list.
This is a fantastic tool for acoustic solos artists, worship leaders, session players or an acoustic rig that lacks a lot of control or a preamp source. Moreover, the Venue provides the additional functionality of tuning, feedback control, an effects loop and a built in DI box. Its price is usually on the higher end, though you can check used pricing which often dips significantly below retail. However, buying a preamp, tuner, noise gate and DI box separately would run you a lot more than what the Venue costs.
Popularity also was a critical factor in our choices, although we generally passed over a few best-selling reissues or boutique clones in favor of the real deal. So even though the Bubba Bob Buttcrack Tube Overdrive may sound more soulful than an original Tube Screamer, if it’s little more than a copy with slightly upgraded components, it didn’t make the cut.
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
It is possible to perform a setup at home, but it can easily become a laborious and time-consuming process. You can instead bring your instrument to a local store or other professional. Guitar setup cost is usually a large value in comparison to the work it would take to do the job at home. You should consider that the cost of a guitar setup includes the addition of new strings but may not cover the actual cost of them. Whether or not strings are included in the price is something that should be investigated prior to having an instrument professionally setup. Guitar setup cost may also increase if the tuning keys need adjustment, or if you have a complicated bridge system (like a Floyd Rose) that requires extra knowledge and skill to be properly fine-tuned.
In the ’66 American Teisco Del Rey Catalog, the small, humble EP-9T was left over from before (formerly EP-9), with the quasi-Gibson style head and triangular control plate. The only thing new was the Bigsby (thus the T). In the ’66 Japanese catalog, the small thinlines were represented by the EP-2L and EP-1L. The EP-2L looks for all the world like the EP-9T, with the large rectangular pickups with black inserts, controls on the triangular lower bout plate, and a long-armed trapeze vibrato with a curved handle. The EP-1L was the same except for having a single metal-covered pickup at the neck.
In comparison with an electric guitar equalizer, a bass equalizer usually has a lower frequency range that goes down to 40 Hz, to accommodate the electric bass' lower range. Some bass equalizers designed for use with extended range basses go even lower, to 20 Hz. Equalizers can be used to change the tone and sound of the electric bass. If the instrument sounds too "boomy", the bassist can lower the frequency which is overly resonant, or if there is too much fingernail or pick noise, the higher frequencies can be reduced.

Had a seven string Ibanez with loose/worn frets worked on. Steve knew right away that the frets had to be tacked and it could use a fret re-crowning and gave me a quote for 125$. I thought it was a bit high but trusted him because of the good reviews. Came back a couple weeks later and he had re-crowned the frets, tacked all the loose frets, tightened down some more loose hardware and did a set-up for only 100$. I am overall quite satisfied with the quality of the work and the pricing. I will be going back to have my acoustic worked on.


What’s the point in having these lists anyway? There’s always going to be anger over people who were left out/included on the list when they didn’t deserve to be… And to say that any of the musicians mentioned so far aren’t talented is ridiculous, there’s no limit in the world on how much talent there is, so why does this list have to be limited to 10? Just saying…
In my own (first) project guitar, I did not know quite what to expect, so I built it with HSH pickups and two complete signal paths. The humbucking path uses 500k pots and an 0.047 cap; the single coil path uses 250K pots and a 0.022 cap. I did this with stacked, concentric CTS 250K/500K pots and an on/on toggle switch, all within the minimal confines of a standard Telecaster control plate. I created a custom 5-way selector switch to isolate the single-coil wiring from the humbucking combinations, but in the end when I flip the switch I opted for just the stand-alone single coil for the warmest sound. As I said above, the tapped humbuckers just didn't compare. This project is a work in progress; I hope this helps you find your own path.
This has always been one of the most revered brands of guitars amongst professional musicians. They sell one of the most affordable and durable electric guitars. The acoustic and classic guitars sold by this brand are ideal for students and beginners. The dreadnought sized body with cutaway has a Sitka spruce top with nato back & sides. The neck has 20 frets & dot inlays on the fretboard and made of nato. The bridge and fingerboard are made of rosewood. Yamaha’s own System55T. The starting price of a Yamaha acoustic 6-string guitar is 6990 INR.approximately.
I have been a bass player and still am however I started on guitar at 12 and went back to it about 12 years ago. There really isn’t too much difference of perfecting your craft on either instrument. The most important thing to realize is when to play and when not to. I spent years learning how not to be a busy bass player and now that I have such a passion for playing guitar, I’m learning how to sound busy without really being busy.
I have owned Fender amps and Line 6 amps and while they have been "ok" amps, none of them come close to my newly acquired Mesa Mark V 90watt and 4� - 12 rectifier cab. Amp is super versitile and the time is out of this world. I knew I'd hit the jackpot the first time I plugged up to one. Mark V pairs nicely with my variety of guitars including PRS Holcomb sig, Fender Tele and Strat, Schecter Hellraiser, and Epiphone Les Paul. There's a tone in there for everyone, every guitar and every style of music... you just have to be willing to sit down and get to know the amp. Mesa Boogie is definitely the brand for me so I cast my vote in with them. Great company with quality amps and super friendly/helpful custom service.
These probably were not made very long, due to the intensity of the war effort. In 1942, production of resonator guitars ceased for good (except for their brief revival on the fiberglass models of the mid ’60s). The acoustic Hawaiian craze had peaked and was already being replaced by electric Hawaiian music, as reflected in the growing line of lap steels. By the end of World War II, resonators were obsolete, and music would be dominated by big-bodied dreadnought and jumbo acoustics, or electricity.
A standard Squier Stratocaster is mass-produced in factories located in Indonesia or China. For its construction, Squier usually uses woods readily available in those countries, such asagathis and basswood. They also use stamped metal hardware and multiple pieces of wood in construction to reduce waste and to lower costs. In some cases, the body is laminated, much like a plywood, rather than consisting of two or three solid pieces glued together.
One thing that is worth trying is combining different delays with different reverb effects. You can get some seriously beautiful sounds with a reverb and delay effect that sound good together. Some manufacturers have even gone so far as to create reverb and delay combo pedals. It is truly a perfect combination of effects, kind of like peanut butter and jelly.
The Mahogany body and neck with rosewood fretboard makes it a highly resonant and great sounding guitar whilst the dual Alnico Classic pickups with push pull coil tapping provide a world of tonality. A SlimTaper D Shape neck profile makes it comfortable for beginners to learn on, whilst pro players will enjoy the ergonomic design 2 hours into their set or rehearsal! Available in more finishes here.
BAJAAO bring to you the best and extensive range Electro Acoustic Guitars also known as the Acoustic Electric Guitar or Semi Electric guitar in layman terms from all over the world. Versatile in design, the electro acoustic guitar is known for its smooth sound and powerful projection. At its core, an acoustic-electric guitar is acoustic in style fitted with a pickup device allowing it to be plugged into an amplifier, a number of effect pedals or played on its own for a more intimate sound. Heard in basically every genre of music, these guitars are indispensable in almost any modern band setting. In acoustic-electric nylon string guitars, piezoelectric pickups and microphones are used because magnetic pickups are not capable of picking up vibrations of non-magnetic materials. The design is distinct from a semi-acoustic guitar, which is an electric guitar but with the addition of sound chambers within the guitar body. Buy the best Electro Acoustic Guitars online with BAJAAO.com with the best and affordable price in India. Make your shopping experience a wonderful one with us.
When the Fender company was bought from CBS by a group of investors and employees headed by Bill Schultz in 1985, manufacturing resumed its former high quality and Fender was able to regain market share and brand reputation. This sparked a rise in mainstream popularity for vintage (and vintage-style) instruments. Dan Smith, with the help of John Page, proceeded to work on a reissue of the most popular guitars of Leo Fender’s era. They decided to manufacture two Vintage reissue Stratocaster models, a maple-fretboard 1957 and a rosewood-fretboard 1962 along with the maple-fretboard 1952 Telecaster, the maple-fretboard 1957 and rosewood-fretboard 1962 Precision Basses, as well as the rosewood-fretboard “stacked knob” 1962 Jazz Bass. This project was very important and critical to the company’s survival. These first few years (1982–1984) of reissues, known as American Vintage Reissues, are now high-priced collector’s items and considered as some of the finest to ever leave Fender’s Fullerton plant, which closed its doors in late 1984.
Think of where you presently are in your journey as merely preparation and training. You are getting in shape to learn to play by developing some basic skills and building finger strength and callouses and coordination. Progress will be very slow in the beginning but if you persevere, you will reach a point where progress comes at a far more rapid pace.

Guitar Neck wood Fingerboard Blanks Electric guitar wood Burl Poplar 1pc Walnut Spalted Apple Burl poplar Spalted Maple Olive Spalted Walnut Burl Elm African Mahogany body wood Red Willow 1pc body blanks Plum Red Willow 2pc body blanks Spalted Birch Pear Mulberry Maple Acoustic / Classic guitar wood Flute and Oud blanks Pool Cue wood blanks & Wood Turning Gallery Sold examples Custom Wood Products Binding wood NEW! Gun Stock Blanks


A Direct Inject signal can capture the power-tube distortion sound without the direct coloration of a guitar speaker and microphone. This DI signal can be blended with a miked guitar speaker, with the DI providing a more present, immediate, bright sound, and the miked guitar speaker providing a colored, remote, darker sound. The DI signal can be obtained from a DI jack on the guitar amp, or from the Line Out jack of a power attenuator.

While it may sound like a good idea to place a booster pedal towards the front of your chain in order to send that added voltage out from the get go, some pedals can’t handle high levels of voltage which can cause feedback and other problems. Also, you don’t want to simply place it at the end as there is not much benefit in adding voltage when the signal has already lost much of its clarity. It would be like enlarging an already fuzzy picture when what you really want is to keep it from getting fuzzy in the first place.
After the lawsuit Hoshino Gakki abandoned the strategy of copying "classic" USA electric guitar designs and moved to the popular superstrat era in the mid-1980s. The newer Ibanez models began incorporating more modern elements into their design such as radical body shapes, slimmer necks, 2-octave fingerboards, slim pointed headstocks, higher-output electronics, humbucker/single-coil/humbucker pickups, locking tremolo bridges and different finishes.
The main reason this exists is because some players prefer to drive their amplifier's preamp with high gain to achieve distortion instead of using an emulation through a pedal. This means that you can't push modulation and time-based effects into the preamp since distortion will come after them. Again, you can do this but it will sound horrible because it breaks our four main rules above. Nobody wants a muddy, smeared, and washed out tone, and thus the effects loop exists.
Phaser – A frequency-based effect that makes a swirling, swooshing filtered guitar tone. Phasers use the principle of “phase” cancellation in which a filter passes over your guitar tone flipping the waveform at specific frequencies. This signal is then combined with your original guitar tone to give the iconic phaser effect used in songs by Van Halen, Pink Floyd and Smashing Pumpkins to name a few.

Compared to an acoustic guitar, which has a hollow body, electric guitars make much less audible sound when their strings are plucked, so electric guitars are normally plugged into a guitar amplifier and speaker. When an electric guitar is played, string movement produces a signal by generating (i.e., inducing) a small electric current in the magnetic pickups, which are magnets wound with coils of very fine wire. The signal passes through the tone and volume circuits to the output jack, and through a cable to an amplifier.[22] The current induced is proportional to such factors as string density and the amount of movement over the pickups.
The entry point for guitar pedal self-assembly is the effects pedal kit. A lot of the work such as designing and manufacturing the circuit board, drilling the enclosure, and selecting suitable parts has already been done for you. With a little care and careful following of the instructions, there’s no reason not to have a first time success with a pedal kit.
PRS recently started using quite an old idea (first suggested to us by guitar/amp technician Brinsley Schwarz). You simply add, in series, a resistor between the pickup ‘tap’ wire and ground. This mod, “doesn’t completely cancel the slug coil,” explains Smith, “it sort of three-quarters coil cancels. It allows some of the other [slug] coil through. It’s also slightly hum- cancelling.”

{"product":{"id":"114572014","stock":"instock","price":"239.99","name":"S421 S Series Solid Body Electric Guitar","download":false,"sku_id":"114572014","checksum":"159269514523","rep_id":"site5114572014","displayId":"114572014","sku_display_id":"114572014","sku_rep_id":"site5114572014","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
Launch price: $1,427 / £999 | Body: Mahogany with maple cap | Neck: 3-piece mahogany | Scale: 24.75" | Fingerboard: Ebony | Frets: 24 | Pickups: Seymour Duncan JB humbucker, Seymour Duncan Jazz humbucker (EMG 81/60 reviewed) | Controls: 2x volume, tone, 3-way selector switch | Hardware: EverTune bridge, Grover tuners | Left-handed: Yes (without EverTune) | Finish: See Thru Black, Dark Brown Sunburst
IN STOCK:,Vintage well built!...Premium build quality by Lyle crsfted in Japan, solid spruce top, high grade quality Mahogany neck see pics. Neck profile is medium profile very comfortable..NEAR MINT JAPANESE VINTAGE GUITAR ...this guitar is like having a new 38 year old guitar it looks so newish... its finish is still very glass like and has been well taken care of over the years well preserved for YOU. The neck angle is PERFECT , frets still are like new still. The action is VERY nice & low and it plays with ease you will be very pleased indeed with its overall condition this is exactly what we look for at JVGuitars to bring you the best near mint vintage. The back and sides are also not your average run of the mill grain but very beautiful vividly wavy grain looking like some exotic woods for sure stained cherry like they would do with mahogany... very nice detail & binding and perfling work overall..this guitar is a real pleasure to play too and sounds wonderful. Anyone would be very pleased and proud to own this nearly 40 year old beauty..
Now that we mentioned some of the exotics, it’s time to go back to the roots. Epiphone Les Paul Standard is as old school as it gets. Legendary LP body style that brings a no-nonsense combo of hardware has always been the way to go. I actually have one of these, and after years of playing it keeps surprising me. I’d say it easily punches way above its price range.

The Ace Frehley (KISS) signature model, released in 1997 and re-released in 2012, has three humbucking DiMarzio pick-ups, a cherry sunburst finish (AAAA), a color image of Frehley’s face in his Kiss make-up on the headstock, and mother-of-pearl lightning bolt inlays, and Ace’s simulated signature on the 12th fret. There was a limited edition, Gibson Custom Shop run of only 300 guitars that were built with DiMarzio PAF, Super Distortion, and Dual Sound pickups. The production run model was only built with DiMarzio Super Distortion pickups. This was one of Gibson’s best selling artist runs. These guitars are now valued at between $US4,000–12,000.[citation needed]The more recent 2012 “Budokan” model features mother-of-pearl block inlays (no signature at the 12th fret), a Richlite fingerboard, Grover machine heads with pearloid banjo buttons, and a grade A maple top.[44]
Fast forward to 2018 and ESP is still going strong, with a huge range of speedy guitars tailored for heavy rock and metal, including several 7- and 8-string models. ESP offers a range of popular models in the budget market (under its LTD subsidiary) as well as high-end guitars, played by some of the biggest names in heavy metal – Kirk Hammett, James Hetfield and Stephen Carpenter to name a few.
We make our Tone Bars / Ferrule Blocks (tone slugs) out of 360 brass and use them on most all of our string through custom guitars. You will notice an enhancement in sustain and beauty.  The ones sold here are not polished. Go to shawwoodshop.com to purchase slugs that are polished. Please ask any questions you might have about the Slug. I offer quantity discounts.

The strings on your electric guitar have a major impact on its sound and playability. If you’ve taken a look at the huge Musician’s Friend guitar string assortment, you’ve likely realized that there’s a lot to consider in figuring out which strings are right for you and your instrument. Keep reading to find the strings that best match your electric guitar, music, and playing style.

Ring modulator: A ring modulator produces a resonant, metallic sound by mixing an instrument's audio signal with a carrier wave generated by the device's internal oscillator. The original sound wave is suppressed and replaced by a "ring" of inharmonic higher and lower pitches or "sidebands".[70][78] A notable use of ring modulation is the guitar in the Black Sabbath song "Paranoid".[79]


EQ or equalization effects work by boosting or cutting specified frequency bands within the sound signal. From treble or high-end sounds such as the sizzling sounds of a riveted cymbal to low-end sources such as the thump of a bass drum or bass guitar, EQ effects don't change the pitch but rather alter the timbre or quality of the sound. Depending on the application, EQ control can be quite precise or very simple.
Obviously, what I've done is to give myself a choice of three different sounds--a close, ballsy sound, a mid-range room sound, and a more distant room sound. By setting all three mics up at the same time, putting them each in a different input, and assigning them all to the same track on tape, I've given myself the option of having any one of those sounds immediately available to me, or a combination of them.
The biggest issue when starting out is not to get any bad habits with picking or hand/finger positioning. I'd highly recommend to find a teacher who - not necessarily on a periodical basis - would take a closer look at your progress and technique and make adjustments when needed. There are lots of bad habits that you can get and I'd rather spend some money on lessons than weeks of lifetime to undo those.
Photo: Pick up an acoustic guitar and what you have in your hands is mostly empty space! Inside, the large wooden body (which is called the sound box) is filled with nothing more than air. As you pluck the strings, the wooden body of the guitar vibrates, the air inside the body vibrates too, and it's the vibrations of the wooden body and the air that amplify the string sound so you can hear it. Acoustic guitars have those big holes in the middle of the case, under the strings, so the amplified sound can get out and travel to your ears. In other words, the hole works the same way as the hole in the end of a trumpet, flute, or any other instrument. Photo by Greg Pierot courtesy of US Navy.

I have a Dover, it was my great uncle’s guitar. It has seen better days but considering its age its in pretty good shape. Some one did some custom wiring inside so I had to replace the pots. One of the pickups was glued back together but it wasn’t done properly so now it doesn’t quite sit right. The plastic cracked at most of the corners where the screws hold the pick ups down.

The bass guitar has a long neck (scale-length) and thick strings. The open strings of the bass guitar corresponds to the four lowest strings of the guitar and are pitched an octave lower. The standard bass has four strings though five and six string basses are available which extends the range of the instrument. Though the bass guitar is the bass instrument of the guitar family and the double-bass is the bass instrument of the orchestral string family their similar roles have drawn bass players to both instruments.
Nice list but how did the Hagstrom Ultra Swede not make the cut? Not only does its quality exceed most of what Epiphone has to offer (not knocking Epi, just sayin) and match many other brands 3x+ its price, it is (in my opinion) also one of the most versatile guitars I can think of. Actually, it seems Hagstrom is ignored or forgotten in what seemingly appears to be every comparison or "top ten" list available... What gives?
• Don’t always blame the frets: Buzzing doesn’t necessarily mean there’s a fret problem. Some guitar players set their bridges for super-low action in their quest for speed, and that can makes frets buzz. For beginners unfamiliar with how accurately tuned strings sound or more experienced players exploring dropped and open tunings for the first time, buzzing can also be a buzz kill. Low tunings like dropped D and open D and open C may prompt guitars with normal action to buzz due to the slack in the strings unless a guitar is set up properly to accommodate such tunings.

I'm going to assume that if you're reading this, you've probably been to two dozen guitar sites, all with varying, if not conflicting information on the correct way to do a setup. I've been there too, I've watched guys on youtube filing down frets with a dremel tool. Now it didn't look right to me, but maybe it works for him. The reality is there is more than one way to do something, and that's OK. If the end result is a great sounding instrument, it doesn't matter how you got there. So I'm going to show you my way of how to get to a great sounding electric guitar. And if you should choose to do something differently, and it works, great!!. Part of having some fun in life is experimenting, I encourage it.
The Japanese copy juggernaut got off to a fast start, and the second major Univox guitar was the Lucy, a lucite copy of the Ampeg Dan Armstrong, again produced by Arai, introduced in 1970. This guitar had a surprisingly thin bolt-on neck (especially compared to the Ampeg original) and a slightly smaller body. The fingerboard was rosewood with 24 frets and dot inlays. This had a fake rosewood masonite pickguard with volume, tone and three-way select. Like the Ampeg, the Lucy had a Danelectro-style bridge/tailpiece with little rosewood saddle. Unlike the Ampeg – which had Armstrong’s groovy slide-in epoxy-potted pickups – this version had a pair of the chrome/black insert pickups jammed together at the bridge. Other Japanese manufacturers also made copies of the Ampeg lucite guitar, notably carrying the Electra (St. Louis Music) and Ibanez (Elger/Hoshino) brand names, with versions of the slide-in pickups. In ’71, the Univox Lucy (UHS-1) was $275 including case. Just how long the Lucy remained available is unknown, but it probably did not outlive the original and was gone by ’73 or ’74.
I have 2 Kent guitars. One like a Strat and one 12 string hollow body. I know they were made in the 60s and were distributed by Kent Musical Products. Address:5 Union Square, New York. 10003. And they were a subsidiary of Buegeleisen & Jacobson, Inc. Any further info on these would be appreciated. Most sold in the price range of 100 dollars and up.
 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.
Jump up ^ The Guitar (From The Renaissance To The Present Day) by Harvey Turnbull (Third Impression 1978) - Publisher: Batsford (ISBN 0-7134-3251-9) - p112 (Chapter 3 - The Twentieth Century) - "In Spain Falla's lead was followed by Joaquin Turina (1882–1949) and Federico Moreno Torroba (b. 1891), who began to produce works in collaboration with Segovia."

“He played an SG, a Les Paul, a Flying V, as well as a Stratocaster, but he always sounded like Hendrix,” Clive Brown states. “He didn’t suddenly sound like Jimmy Page because he played a Les Paul. That’s where everybody’s perception seems to go wrong. It’s the playing, and not necessarily the guitar.” In spite of an entire multi-million dollar industry revolving around selling musicians the latest gear, and in spite of thousands of axeslingers, aspiring and acclaimed alike, who readily gobble up that gear, it all seems to boil down to two implements— and we’re born with those.
The Epiphone Les Paul SL guitar (seen here in a Vintage Sunburst finish) is a great option for beginner guitarists out there as well as those in need of a high quality, budget friendly guitar that actually sounds and feels great. This is one of our best cheap electric guitars thanks to the fact you get a Les Paul style guitar packed with ceramic single coil pickups capable of spanning a range of different genres for under £100.
Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.
I have established a broad network of invaluable contacts in the vintage guitar business. Please let me know what you are looking for, and I'll do my best to find it! Also, I am paying the highest prices for clean lefty vintage guitars. Let me know what you have; I'll be happy to work out a deal you will be happy with. I do want to mention that I buy righty guitars on ocassion as well, especially those that can be easily converted to lefty, including Fender Strats and ES-335/345 guitars.
I’m assuming rock guitar players so i’d say Jimi Hendrix, (I don’t personally like him but just about everyone else does) a good album of his would be “Are You Experienced?” or “Electric Ladyland”. Eric Clapton’s good stuff would be his records with Cream, mainly “Wheels Of Fire”. Van Halen’s first album (Just titled” Van Halen”.) Then Led Zeppelin 1, Led Zeppelin 2, and Led Zeppelin 4. A good Rush album would be nice too, either “Moving Pictures” or “Permanent Waves”. You might not see this but you should make sure he doesn’t have any of these yet and that he’ll like them.

List of guitar brands that include the most reliable models available. Guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
With expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with "locking" nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use.
×