Here, we look at the third and final kind of mini-toggle switch, the “on/on/on” switch. After showing how the connections are made within the switch, and seeing the two types that can be found, we look at two uses for the switch: firstly to create a series/split/parallel switch for a humbucker, and secondly to use the switch as a three-way pickup selector.
However, John Leckie states an interesting preference for an SM58 and U67 rig instead: "SM57s tend to be that little bit brighter than the SM58, which really isn't what you want when you're miking up an electric guitar amp. You really want to pick up a flat signal, an 'unstimulated' signal I suppose is the word... The U67 gives you the warmth and a broader sound."

At this time (and for a while now) the best guitars are made in Japan and Korea. However Japanese guitars carry a premium which you don’t find to the same degree on Korean guitars. So Korean guitars will offer the best value and quality for price. There is a Cort factory in Korea, however 1) The Korean Cort factory also makes entry level guitars and 2) Cort also have other factories in other countries which have much lower standards. There are some good/excellent Cort guitars but there are also many bad ones with shoddy workmanship. So Cort as a brand name isn’t enough to guarantee a well made instrument - you also need to check it’s made in Korea, and also that it’s one of the better models (price will probably be a guide). All the brands made at the largest factory, the World Instrument Co. one (which makes PRS SE and Chapman guitars among others) are built to a very high standard.
Shimming a neck: The best shims are one piece and the full size of the neck pocket. For this veneer from the hardware store works well. However, it is very hard to get an even taper on these. The next best option is to use masking tape. Masking tape is paper which is wood fiber so it's almost as good as a solid shim, and much better than the smaller shims which leave large gaps which impedes the transfer of vibration, and could cause problems later on. To make a tape shim, lay strips of tape side by side perpendicular to neck, and add layers to provide the taper. i.e. stripe 1- 1 layer, stripe 2- 2 layers, stripe 3- 3 layers. Place the neck in the pocket, mark outline of pocket, and trim just inside outline.

{"eVar4":"shop: books sheet music and media","pageName":"[gc] shop: books sheet music and media","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media","prop1":"[gc] shop: books sheet music and media","evar51":"default: united states","prop10":"category","prop11":"books, sheet music & media","prop5":"[gc] shop: books sheet music and media","prop6":"[gc] shop: books sheet music and media","prop3":"[gc] shop: books sheet music and media","prop4":"[gc] shop: books sheet music and media","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

Today's modern rock guitar sounds tend to be "drier" (less room ambiance and reverb), and most often use the close mic technique. There's really nothing to it. Simply use the close mic, run it through the compressor, set the compressor at a 3:1 ratio and adjust the threshold so that the compressor is usually working, but not squashing the signal too much. You will be able to make most of the tone adjustments you need at the amp or guitar, and chances are you won't need to tweak the console' s equalizer at all.

PRS guitars are among the best on the market. Their style, tone and design are unique, giving them a pretty good chance against much more established brands. PRS Custom 24 has been my go-to choice, and will remain so in foreseeable future. If you are looking for good old American craftsmanship combined with a killer tone, PRS is definitely worth checking out.

You can trace all things loud and riff-y right back to the Kinks' Dave Davies, starting with the fantastically simple power chords of "You Really Got Me," which he recorded at age 17 – setting off a run of proto-metal singles from "All Day and All of the Night" to "Till the End of the Day." Davies, who created the distortion on "You Really Got Me" by slicing an amp speaker with a razor, has laughed off claims that it was actually played by an uncredited Jimmy Page: "Who'd want to play a solo that crazy, anyway? Only Dave Davies could do that."
Guitar amplifiers vary in wattage. If you're playing to a massive audience, you'll want several 100-watt amps; however, for everyday use, that is overkill. If you merely want it for practice, a 10-watt solid state guitar amplifier will do, and if you're playing to a small venue, you'll probably want to consider a 20-watt valve amp. It's surprising how much sound a little amp will produce.
Chorus: Though it can be overused, light distortion works well as a filler for choruses in Christian worship and most other genres.Verse: You won’t typically hear a distorted verse, though at times a two guitar group can make this work. Generally, you’ll want to leave distortion for the higher intensity portions of a song.Bridge: A lot of Christian songs tend to lower intensity during the bridge, which means light distortion becomes a little less usable. Though for bridges that keep the tempo up, it can work pretty well.

If this is your first time picking up a guitar you may not have seen chords depicted the way they are below. You can find out how to interpret the chords by looking at how to read chords. Each of the chords below shows the chord notation and a picture of a hand forming that chord on neck for your reference. This notation is the common way for showing chords, you may find guitar songs depicted differently elsewhere. This is usually the tablature notation. Here you can find more information on reading tablature notation.

Check the action and clearance of the guitar strings by playing it before you begin setup. There should be 3/64-inch between the fret and the string on the treble side, and 5/64-inch on the bass side. Check that there is no buzzing when you play high up on the neck, and that the strings are not too difficult to push. If you hear buzzing, the neck must be corrected for underbow; if the strings are too far from the frets, the neck must be corrected for overbow.
3/4 guitars are fine for children under the age of 11, or as travel guitars, but if you want to learn properly, then buy a full-size guitar at the start. I started on a full-size classical guitar right back when I was knee-high to a grasshopper; initially, it's hard, but your fingers adapt fast enough and you will soon develop flexibility and dexterity. For children under 11, a 3/4 guitar is an option, but even then I still feel that full-size is better. Check out all the amazing 6-year-old kids playing amazing stuff on the internet, 9 times out of 10 they are playing full-size instruments.
This article was extremely helpful for me to understand the 5 way (ok, 3 way) switch. I’ve only previously wired a guitar with one double humbucker, and now I’m going to replace the bridge and neck pickups in an Ibanez that has HSH. The 8 contacts were confusing me since my last wiring job didn’t even involve a switch, but after reading this I know exactly what to do.

Beavis Audio Research – started in 2005 as a hobbyist site to share information on DIY guitar electronics. From the initial few pages of questionable designs, it has grown to a popular place for DIY freaks to visit and learn. Along the way, beavis has evolved into a small company. They strive to advance the DIY ethic and provide resources, tools, kits and products to the worldwide community of gearhounds.
The 1964 TRG-1 was a slightly more asymmetrical variant of the WG body style, with offset double cutaways and offset waists. It had the squared-off Bizarro Strat head introduced in ’63 and rectangular-edge fingerboard inlays. The tail was a primitive top-mounted trapeze. Most of the face of the guitar was covered with a large metal pickguard, which had one two-tone neck pickup. The volume and tone knobs were above the strings, as was a small sliding on/off switch for the amp. In the off position, the guitar played out as a normal electric guitar. Horizontal grill slots were cut into the pickguard, behind which sat a 3-inch speaker. The amp operated on two 9-volt batteries installed in back. The TRG-1 shown in the subsequent ’64-65 catalog had a new, hooked headstock, but all the examples I’ve seen have the squared-off Bizarro Strat head. Also, the model I have has a TRE100 designation on the back sticker, so at least some were called this.
TonePad – provides ready-to-use layouts and circuit boards for effects and amplifier projects to the do-it-yourself music community. All layouts are provided free of charge and are subject to the limitations set forth on their legal page. Parts are available from Small Bear Electronics, and ready-made PCBs for many projects are now available directly through tonepad.
For example, in the guitar (like other stringed instruments but unlike the piano), open-string notes are not fretted and so require less hand-motion. Thus chords that contain open notes are more easily played and hence more frequently played in popular music, such as folk music. Many of the most popular tunings—standard tuning, open tunings, and new standard tuning—are rich in the open notes used by popular chords. Open tunings allow major triads to be played by barring one fret with only one finger, using the finger like a capo. On guitars without a zeroth fret (after the nut), the intonation of an open note may differ from then note when fretted on other strings; consequently, on some guitars, the sound of an open note may be inferior to that of a fretted note.[37]
When used with the human voice, it is important that the pitch correction doesn't happen too quickly, otherwise all the natural slurs and vibrato will be stripped out leaving you with a very unnatural and robotic vocal sound. If only a few notes need fixing, consider automating the pitch-corrector's correction speed parameter so that it is normally too slow to have any significant effect, then increase the speed just for the problem sections. This prevents perfectly good audio from being processed unnecessarily.
At some point, possibly in 1967 – please forgive the fuzzy chronology, – Unicord was purchased by Gulf + Western, the big oil/hospitality conglomerate. This was part the corporate acquisition mania rage of the mid-’60s which included deals for Fender (CBS), Gretsch (Baldwin), Valco (Seeburg), Kay (Valco) and Gibson (Norlin). Either just before or just after the Gulf + Western purchase of Unicord, Unicord was merged with Merson. It was probably then Merson moved from New York City to Westbury.
The Epiphone Joe Pass Emperor II is the signature guitar of one of jazz music’s great guitarists. Joe Pass played on records with Ella Fitzgerald, and his influence has cemented his name among the greats of the genre. The guitar which bears his name is a fine example of a guitar geared precisely towards one genre. It won’t win any awards for versatility, but it is a fantastic instrument for jazz fans of any skill level. Featuring the classic hollow body arch top design of old but with two high quality Burstbucker pickups for a range of silky tones.

There have always been slight variations in the color of the cream plastic parts used on Gibson and other guitars. It's not uncommon to see brand new and vintage guitars with bindings, pickup rings, toggle switch rings and pickguards that don't perfectly match in color. We do our best to match all our cream products, but there's no absolute control from batch to batch, or from supplier to supplier.
Amplesound's AGM Lite is a freebie guitar VST that can run as a plugin or as a standalone. (Standalone == no digital audio workstation required, just open the program, turn on your speakers and play). In either version, one can write strum patterns with the point-and-click cursor, and use the on-screen keyboard to make things happen without ever touching a keyboard.

Actually it was a rolling stone interview, I don’t remember the exact issue but the reply was Rory Gallagher. I’ve also heard it was Phil Keaggy which is unlikely because he was relatively unknown when Hendrix was alive. I’ve also heard it was Terry Kath, Billy Gibbons, and Eric Clapton. I do know that Hendrix said his favorite guitar player was Gibbons, because he just couldn’t get that sound that Billy gets. As for the Quote……. maybe it’s just folklore… The most likely correct answer is Rory Gallagher though…. it’s even referred to in Rory Gallaghers biography and the actual issue of the rolling stone interview is listed in there. I’ve never heard anyone say that the quote was with Jerry Reed though. But, Jerry Reed is an AMAZING guitar player. He actually wrote alot of Chet Atkins material. As for misquoting Hendrix you may not want to be so quick to point fingers…. I’m pretty sure yours is wrong. 😉
These guitars use very cheap materials. I bought a washburn WM24v PROE for $300 and it come with Mahogany body & neck, phenolic fretboard, emg81/85 and original floyd rose... Ibanez RG costs $400 and comes with basswood body, bolt on maple neck, rosewood fingerboard, shoddy pickups and a licensed floyd that WILL NOT stay in tune. Poor quality for money, if you get a Ibanez go for a fixed bridge/string-thru because their trems are HORRIBLE! Original floyd is the only way to go!
Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Dave Friedman (Rack System, Ltd.): “Pedal order is a very subjective thing, and I’ve had people do it all backwards because that’s the way they like it. Generally speaking, compressors come before overdrives, modulation things are kind of in the middle, and delays are at the end. The wah is kind of a personal preference. Sometimes it’s in front early in the chain, and sometimes it’s after overdrives.

Once again a British company. It isn't hard for this brand to attract attention thanks to the (would you believe it?!) orange color that envelops most of their products. The first models saw the light of day in the late 1960's with the OR series. Its first renowned users were Fleetwood Mac and later Jimmy Page... The crunch sound and the mid-frequency range are the brand's main attributes. Orange even managed to outclass Marshall in the 1970's thanks to its prestigious endorsers. In the 90's, Noel Gallagher from Oasis was the best-known Orange fan and he even collaborated in the development of the OTR head. At the start of 2011, the brand surprised everyone and launched the OPC, a workstation for musicians — actually a PC and a guitar amp in a single unit.

With $500 in your pocket, buying a good amp becomes a lot easier. In fact, it’s probably as expensive as most casual guitarists would ever need to go. This category includes a big choice of both amp heads and combos, solid-state and tube amps. While they make great practice amps, they are all worthy of small to medium-sized gigs and studio recording. For example, you can find the excellent Peavey ValveKing II. This little amp head offers the same beastly tone as the iconic full-size 6505, with 20 watts of power and solid controls.
Like Ibanez, Jackson is known for targeting the metal crowd. They have a variety of instruments available from affordable lower-cost guitars to high-end pro/enthusiast guitars. Jackson likes to keep their designs unique. Think of an 80s metal band and what they might be playing. If you thought of pointy guitars with sharp angles, Jackson might be what you’re looking for. Jackson not only sounds metal, it looks metal too. The Jackson King V, for example, is a staple instrument. If you know who Dave Mustaine is, you’ve heard of Megadeth. Because he was a co-founder and its guitarist. He is one of the people who made the Jackson King V as famous as it is. However, the design can be a bit too over the top for some people. Not everyone wants their guitar to be as “loud” as the sound it produces.

In October 2017, Gibson announced plans to relocate its Memphis operations to a smaller location and plans to sell the Memphis property. Gibson opened its Memphis facility 18 years before, which occupies just a portion of a massive 127,620 square foot complex. According to the Memphis Daily News, Gibson plans to search for a new facility for its Memphis operations and will stay in the current spot for the next 18 to 24 months. The facility, which sits across from the FedExForum along South B.B. King Boulevard, is expected to list for $17 million.
Most pedalheads consider the Ibanez TS-808 Tube Screamer and, to a slightly lesser extent, the TS9 which followed, to be the grandaddies of overdrive pedals—and, yes, they certainly generate an element of distortion, too. Indeed, more boutique overdrives are based on the late-1970s and early-’80s Tube Screamer template than on any other, but despite the claimed improvements and undeniable quality of many of these, original units still usually fetch far higher prices on the vintage market (ain’t it always the way?) than new units do in the stores. With all of these—and other vaguely similar units—the guts of the sound comes from a clipping amp based around the first section of a dual opamp (purists swear by the JRC4558 chip in the early Ibanez units) and a pair of clipping diodes, with transistorized buffer stages at both the input and output, and a section for tone-shaping and output level control which uses the second part of the dual opamp in conjunction with a network of capacitors and resistors.
The other switches you might find on a guitar can change the wiring of the pickups from being in series or parallel , or to switch the phase so the pickups are in phase, or out of phase. All the switches are there to allow you to change the tone of the guitar.  Those switches can be toggle switches, or push-pull switches built into the volume or tone control knobs.
Shop our selection of guitar and bass electronics parts and supplies. Everything you need to to finish your guitar electronics project like a pro. Volume and tone pots, pickup selectors and mini switches, jacks, tone capacitors, wire, solder, shielding and more. Get the full potential from your guitar's pickups with the finest quality guitar electronic parts from top manufacturers like: CTS, Bourns, Fender, Switchcraft, CRL, and more. 
OK, our math isn't so great, so we've gone ahead and included an 11th amp in this list of 10. Although it's way too soon to be declared "iconic," PRS Guitars' brand-new Sonzera series of amps have been hot topics in gear land since they were introduced at the 2017 Winter NAMM Show. Let's just call them "instant classics." Featuring a rugged steel chassis, custom transformers and road-ready construction, each Sonzera model delivers serious tone with maximum reliability.

The guitars included three bolt-neck Strat-style models, the GS-1 (one humbucker), GS-2 (two humbuckers) and GS-3 (humbucker/single/single). Most had locking Kahler vibratos, although at least one GS-3 has been seen with a traditional fulcrum vibrato. The bodies had a German carve relief beginning at the waist and extending forward to the cutaway horns. The necks had 21-fret rosewood or maple fingerboards with dots. The six-in-line heads were kind of squarish and bi-level, with a carved relief along the lower edge, kind of an Ovation trademark. The logos said Ovation Ultra GS. The GS-1 (volume only) and GS-2 (volume, tone, three-way) had pickups mounted on rings on the top. The GS-3 featured a black Strat-style pickguard. One source refers to a GSL model, but nothing is known about what this means, if it isn’t a typo. Most of these came with typical exposed-pole DiMarzios, but the previously mentioned guitar with the fulcrum vibrato also had twin-blade pickups with DiMarzio stenciled on the covers.

Now, in the days of solid state signal processing, outboard units are available to produce a facsimile of the old tube-type distortion. Some units actually incorporate a vacuum tube and do it the old way. Other electronics packages simulate the effect. The "tube-type" distortion is preferrable to many over the kind of distortion produced by solid-state amplifiers because the tubes just gradually rounded over the peaks as they went into distortion, whereas the solid state devices just chop off the tops of the peaks cleanly at the supply voltage point, producing a harsh distortion. One type of distortion device, employed as a distortion pedal, was called a "fuzz box".
Manne guitars - This Italy based guitar manufacturer produces instruments with unique features. The first Manne guitar was built in 1986 and they continue to provide finely crafted instruments based on some very original design concepts. Manne's design philosophy: hand craft the finest stringed instruments then offer them to the public at a reasonable price.

You've bought most ANY new guitar that sells for less than about 700-bucks.  Seriously.  These days there are LOTS of really decent guitars out there in the $300-$500 price range.  Guitars designed well (and by that I mean ripped-off from Leo Fender), with bodies and necks that have been cut precisely by high-end CNC machines, decent hardware, and again a nice CNC-finish on the frets and good-looking automated paint jobs.  All in all, a guitar that plays well, intonates and stays in tune well, and looks great.  But ... sounds mediocre!  Yep, ALL manufacturers skimp on the pickups today, at least on any guitar less that about  $700-$1000.  Great guitar with midlin pickups?  Yea, fix that!
Another great practice amp in the running for best electric guitar amp for beginners is the Blackstar HT Series HT-1. It’s a 1W tube amp with a single 8″ speaker. It features 2 channels (clean and overdrive), stereo MP3 / line input and external speaker output. It’s use of dual-triode ECC82 tubes provides the crunch and break-up characteristics of a traditional 100w amp at a much lower volume. It also has EQ, Gain and Reverb settings.
Choosing the right strings for your instrument and your style of playing might not seem like the biggest deal. After all, the Delta bluesmen of the ’20s, ’30s and ’40s often bought used strings at dry good stores for a few pennies, or boiled old strings to brighten them up. And the proliferation of brands on the market can be overwhelming to the point of leading a player to assume strings are as generic as picks – which aren’t really generic at all, but that’s another story.

{ "thumbImageID": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "defaultDisplayName": "Lakland Skyline Deluxe 55-02 5-String Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Maple Fretboard", "sku": "sku:site51274115060918", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard-1274115060918.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "brandName": "Lakland", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cherry Sunburst Maple Fretboard", "sku": "sku:site51274115060902", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard-1274115060902.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard/517707000020063", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst Rosewood Fretboard", "sku": "sku:site51274115060911", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard-1274115060911.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard/517707000064069", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
If your volume and tone knobs start to make crackling or popping noises through your speaker whenever you’re plugged in, or if the signal is weak, inconsistent, or cuts out altogether in certain positions on your controls, some foreign matter (however minute) has probably lodged itself in your controls. Dust and rust pose the greatest potential threat to any electronic connection.

Gibson offers a whole variety of models, but if you want to experience this brand, Gibson Les Paul Standard is a must. This is as old school as it gets from a brand new guitar. The finish on this one is Cherry Sunburst, which is as iconic as the model itself. With two PAF humbuckers, you get to experience the vintage tone that launched Gibson into stardom.
B.C. Rich has been scorching stages all around the world with their monstrous guitars for nearly 50 years. With bodies like a battle axe and tones that are just as brutal, B.C. Rich guitars have become staples in the heavy metal community. Inspired by the look of classic motorcycles, B.C. Rich guitars are as unmistakable as they are undeniable. If you're a fan of seriously heavy music, you've already seen these beautiful guitars around the necks of some of the biggest names around. Slayer's Kerry King, Matt Tuck of Bullet For My Valentine, Lita Ford, Ginger Wildheart of the Wildhearts, and Pat O'Brien of Cannibal Corpse are just some of the metal messiahs who crank out riff after riff on B.C. Rich guitars. If you're after a B.C. Rich of your own, you've come to the right place. You'll find guitars for all skill levels in the section, it's just a matter of taking a look around and finding the axe that's right for you. For example, if you're a beginner looking for their first killer electric guitar, you'll want to take a look at the Bronze Series Warlock. If there is one word to perfectly describe this guitar, it would be "wicked." It has a wicked look, a wicked sound, and is offered up at a wicked price. With BDSM humbucking pickups for a broad dynamic range and a beveled top, this is the kind of six string that any young rocker will want to learn on. Of course, if you're already a serious player who is looking for a truly intimidating beast of a guitar, you'll want to get your hands on the Rich Bich 10 Supreme Electric Guitar. This 10-string guitar has a look you'll have to see to believe, and a sound quality to match. With Seymour Duncan humbucker pickups and the ability to completely revolutionize your playing style, this versatile guitar is an absolute knockout. A B.C. Rich guitar is exactly what you need to get you through the rock and roll trenches. With bone shaking volume and bodies to match, B.C. Rich guitars are sure to get you noticed when you're on the stage.
The BOSS ME-80 multi effects pedal is an excellent entry point into effects as it contains just about every type of effect you can think of. The ME-80 allows you to chain eight effect groups together in one patch with 36 preset patches allowing you to seamlessly switch from rock to funk to jazz at the push of a footswitch. There are also 36 user patches so you can create your own tone.

Now that said, the orientation of the individual saddles does have some significance. In an ideal world, you would have all of the saddles sitting with the flat side facing the pickups. This is so that there is an immediate fall-off as soon as the strings clear the saddles so that they vibrate as cleanly as possible. At the same time, the fall-off towards the stop bar tailpiece is a little more relaxed and possibly a little more forgiving on your strings. In the real world, however, you may have to swap one or more around in order to intonate the guitar properly, and this is more important.
Southpaw Guitars has over 900 Left Handed Guitars and Basses In Stock at any time. At Southpaw Guitars you will find a knowledgeable friendly sales staff to provide Service, Assistance, and Guidance as you purchase your Dream Guitar. Furthermore, You will not be greeted by hold music, transferred between departments, treated discourteously, or given the sell what we have routine. We are conveniently located in Southwest Houston. 713-667-5791
In terms of precedent, one of the best known users of a parlour acoustic is Ian Anderson, frontman of eccentric British prog-rockers Jethro Tull. Here the smaller sized guitar enabled Mr Anderson to sling it off his shoulders, often mid song, to embark on a flute solo or child-scaring facial contortion marathon.  So, if that’s your goal, a parlour is the guitar for you.

I signed up for the Free GuitarTricks Trial and the first lesson that I checked out was titled something like “Blues Style Level 2 – How B.B. King Starts The Blues”.  You wouldn’t believe it. Shortly after starting this lesson I felt that my playing sounded the way it should be sounding. It sounded kind of the same as how B.B. King sounded. I was over the moon. This was simply an amazing experience and I never looked back. Today I am almost sure that I would probably be a Rock Star today if Guitar Tricks would have been around 20 years earlier ;-).

Bending: Bending is a pretty common element of Tab. You can tell that you are supposed to bend a note by an upward pointing arrow next to one or more numbers. The distance you are to bend the note will be defined by an indicator next to the arrow. It might be a “full” bend or a “1/2” bend. Once you are exposed to a couple of bends you will quickly catch on to the basic idea.
Okay first of all yes, John Mayer deserves to be on this list. I would've probably put him even higher. I understand if you don't agree but go listen to his Where The Light is album and get back to me on that. I think Eric Clapton should've made the list though. And, although I'm not a big fan of metal I can say as a guitarist anybody can go up and down scales and embelish notes and sound like a metal genius. The artists above put real soul into their music. I think you have an amazing list though. Many people probably would've have thought of some of the people on here… but what about Derek Trucks?
While the decision to choose between bridges can be an overwhelming one, to simplify things, it’s better to choose one that’s appropriate for your skill level and your personal taste in music.  One bridge for the heavy metal genre may be absolutely frustrating for a country player.  For those with numerous guitars, you might have a different bridge on each instrument to suit that situation or style of music.
The K-4L (Teisco Del Rey ET-460 Super Deluxe) had four of the large, chunky, single-coil pickups with chrome sides and black center insert revealing six square poles. These were controlled by four sliding on/off switches, plus a 3-position switch for solo, rhythm and super bass sounds, as well as volume and tone. The roller bridge had a spring-loaded muffler/mute.
 You will not grow here or learn anything that will be useful in any other company unless they employ 1950's management techniques. Maybe a screenwriter for "Madmen" would find some material here but as someone trying to grow their career you won't learn anything useful. The pay will be no better than your last job minus your previous bonus and 401k match which to my knowledge they do not contribute. So next question, your not making any more money and probably less, not learning anything useful and will need to explain why you left after 6 months, how are you going to position this to beat the competition going after your next job?
Make your next guitar one of a kind. Every luthier set sold by OregonWildWood is visually unique and distinctive - even sets within the same species vary greatly in color, contrast and figuring. You'll find the largest online selection of guitar woods available - all special within their own right. All are exotic, beautiful, unique and superior. Each set is individually pictured giving you the opportunity to choose the perfect one for your next guitar.
Home>Guitars, Amps, and Effects >Electric Guitars PrintRefine your searchBy CategoryElectric Guitar Bags (55)Electric Guitar Cases (94)Electric Guitar Packs (5)Electric Guitar Parts (99)Electric Guitar Pickups (203)Electric Guitars: 6-String (946)Electric Guitars: 7-String (59)Electric Guitars: 8-String (13)Electric Guitars: 9-String (1)Electric Guitars: 12-String (5)Electric Guitar Strings (112)Electric Travel Guitars (2)Left-Handed Electric Guitars (70)Signature Model Electric Guitars (55)By BrandBabicz (8)Charvel (28)D'Addario (35)D'Angelico (33)Darco (1)Dean (34)Dean Markley (2)DiMarzio (39)DR Strings (10)Dunlop (3)Elixir (10)EMG (42)Epiphone (88)Ernie Ball (41)Ernie Ball Music Man (30)ESP (86)EVH (13)Fender (176)Fishman (39)Fret-King by Trev Wilkinson (3)Fusion (1)Gator (23)GHS (6)Gibson (167)Godin (2)Graph Tech (9)Gretsch (58)Guild (11)Hagstrom (15)Hamer (5)Ibanez (166)Jackson (78)Kramer Guitars (4)Levy's (2)Line 6 (6)Mojotone (35)Mono Cases (9)On-Stage (3)Peavey (1)Planet Waves (1)PRS Guitars: Paul Reed Smith (62)Reunion Blues (8)Reverend Guitars (11)Schaller (2)Schecter (77)Seymour Duncan (75)Silvertone (3)SKB (13)Squier (27)Steinberger (3)Sterling by Music Man (17)Supro (3)Taylor Guitars (7)TKL (5)Tronical (3)TV Jones (7)Ultimate Support (1)Vorson (1)Washburn (1)World Tour (8)Wylde Audio (6)Yamaha (5)Play as you Pay® Eligible4-Payment Plan (1022)6-Payment Plan (1133)8-Payment Plan (1053)12-Payment Plan (856)By Price$0 - $24 (154)$25 - $49 (25)$50 - $74 (23)$75 - $99 (107)$100 - $149 (132)$150 - $199 (93)$200 - $299 (100)$300 - $399 (80)$400 - $499 (92)$500 - $749 (210)$750 - $999 (267)$1000 - $1999 (304)$2000 - $2999 (99)$3000 - $3999 (66)$4000 - $4999 (35)$5000+ (13)Availability In Stock Items (1549)Clearance Gear (278)By ConditionNew (1631)Warehouse Resealed (11)Blemished (256)Scratch and Dent (22)Viewing products that ship to: Customer Kudos "The extended payment plans at zZounds are superior to the other online retailers. The others require you to have a credit card issued by them. Also I've never had a problem exchanging or returning defective gear and the exchange item is in the mail once the returning item is picked up by the shipper." - Customer on October 14, 2017 1 MILLION+ Happy Customers learn more Guitar·Bass·Keyboard·Recording·Computer Audio·Live Sound·Drums·DJ·Accessories
Modulation, in general electronics, means the altering of signal strength. In audio devices, modulation is a control feature that varies the strength of some effect over time to alter tonal properties. Some modulation effects mix ("modulate") an instrument's audio signal with a signal generated by the effect called a carrier wave.[70] Other modulation effects split an instrument's audio signal in two, altering one portion of the signal and mixing it with the unaltered portion.[71]
A combination of standard 6 string tuning and a 7th string dropped one full step for power chords, used by deathcore bands such as Suicide Silence, Oceano, and Whitechapel, as well as other bands such as Lacuna Coil, Blotted Science, In This Moment, Chimaira (on Pass Out of Existence and Crown of Phantoms), and occasionally Scar Symmetry, Escape the Fate, King 810, The Devil Wears Prada, Dry Kill Logic, Eldest 11, December In Red, A Fall To Break, and CFO$ on some songs. Triumphant Return guitarist Matti varies this tuning by dropping both the low B to A and low E to D and raising the high B and E a half-step to C and F (A-D-A-D-G-C-F).
Tube amps are appreciated for their high fidelity, which allows for the player’s ability and the quality of the guitar to be put to full fruition, and for their equally natural overdrive, which is achieved easier than with most solid state amps. However, besides being more expensive as an initial purchase, tube amps will also prove harder to maintain since lamps have a tendency of blowing up and are themselves quite expensive.

A while back I bought a GuitarPort, a product from Line6 that was one of the earliest guitar-to-PC interfaces. It cost me $99. It connects through USB and I could plug the guitar into it. I could play amp models and effects through my PC and the sound would come out of the computer speakers. (Headphones are of course an option through the PC speakers)
Even cheaper (abour $40) is the Behringer Guitar Link (review: Behringer Guitar Link UCG102 USB Interface Review). One nice thing is the long cord.. you can sit a ways away from your PC without needing an extender, and like the line 6, it’s also got a headphone output. They offer some guitar effects software as well, via download, and a basic DAW program. Worth checking out, as this does check every basic box for forty bucks. I have not used this, but I have used other Behringer audio interfaces. Cheap, basic, but they do include ASIO drivers (read ahead).
When Jimi Hendrix came on the scene in the late 1960s, he was like nothing anyone had ever seen before. His ability to use volume, feedback, wah pedals, and other sonic devices to their maximum effect was awe-inspiring. Eric ‘God’ Clapton saw Hendrix for the first time and thought he would be the end to his career. There may be more technically impressive guitar players, but it’s hard to find anyone who played with more adventure or spirit than James Marshall Hendrix.
In the years following Electric Mud and Muddy's Death in 1983 from heart failure , the record itself started building a cult around it, comprised of acid rock fans, record collectors and curious people. By 1996, the resurgence of popularity in the record matched with its scarcity led it to being reissued in a deluxe edition by Chess with new line notes by Mark Humphrey and Marshall Chess. Despite all the bad press Electric Mud received, Marshall Chess never stopped claiming it was a brilliant, misunderstood record.
A very, and in my opinion (from experience), the most difficult technique to learn and one of the most versatile. From simple single string transitions (a term I use to describe it I don't know the actual term) and used in jazz to quick shredding in rock. Learning this skill was not only a task, but helped me more fully understand a lot of musical theory.
Many acoustic guitars come equipped with "light" gauge acoustic guitar strings. This is probably a good place to start - if you are a heavy strummer and find yourself breaking strings often, you may want to consider buying slightly heavier gauged strings. The following is a list of the standard string gauges included with each set of acoustic guitar strings.
A partial PA is harder to define, but it's essentially any PA system that doesn't have the capacity to mic your whole band. More often than not, in these situations, mics end up on the kick drum and snare drum for the reasons outlined above. In this case, it does help to have a little extra juice in your amplifier, but try to keep it tamed, nonetheless.
Consideration of this takes us back again to Kink Dave Davies: “The blues players were the first to crank it up, and the music had that spirit, that anguish. We used to listen to all those guys. Like John Lee Hooker—he had that buzz, that drive. I used to listen to him and think, ‘What’s he doing there? That’s amazing—how do you get that sound?’ I think all those elements led to me messing around with amplifiers, because all the amplifiers were clean, soulless.”
While he could put out an album of his farts or slap his name on any shitty guitar and still make millions, he is a painstaking perfectionist who spent years agonizing over every minute detail of his EVH Wolfgang guitar and EVH 5150 III amp before offering it to the public and who has refused to release a new Van Halen album until he feels it’s ready.
The amps have a simple control set on the front panel: all versions have Gain, Tone and Volume controls except for MV50 Clean, which has Treble, Bass, and Volume. Also on the front panel is a small "VU" meter, and a 1/4" input jack. On the rear panel are a 1/4" speaker output jack, and a 1/4" headphones/line out jack. The amp includes cabinet simulation at the line out jack, and can thus be used as a DI to go straight into a mixer or recorder. There is also an EQ switch to select between "Deep" and "Flat." The Deep setting is intended for use with smaller cabinets where mids and highs tend to overwhelm the low frequencies, and Flat is designed to allow the amp to work with larger cabinets where the lower frequencies are more naturally present. Also present on the rear panel is the DC19V in jack, and the ECO on-off, standby-on, and Impedance switches with the following two exceptions: MV50 Clean has no Impedance Switch but instead has an Attenuator switch allowing the choice of either full power out, 1/10th power out, or 1/100th power out, and MV50 High Gain, which has no Impedance Switch but instead has a Mid Ctrl "minus/Norm/plus" switch allowing boost or cut of the amp's mid range.
Pre-delay on the reverb can help separate it out from the source sound. If your reverb has no controls for pre-delay, you can simulate this using a simple delay on an aux track before the reverb. Decay Settings: Choosing the most appropriate reverb treatment for a song can be surprisingly difficult, especially if you have hundreds of presets to choose from. So, instead of regarding reverb like the glue that holds the mix together, try adjusting its parameters (and in particular the decay time) while listening to the reverb return by itself. If the decay time is too long you'll hear a continuous mush of sound; if it's too short you'll scarcely hear it unless its level is turned right up. Somewhere in the middle you should find a setting that adds rhythmic interest to your song, without overpowering it, making the reverb work for its keep. This is also a useful technique when using several reverbs in a song, to make sure they complement each other. Martin Walker
Years ago companies used to manufacture rotating speaker cabinets (the most famous being the Leslie Rotary Speaker) – as they rotated the sound would change and develop, creating interesting modulation effects. Nowadays such things are considered too large and inconvenient to transport and use, so we have stomp boxes to help us emulate the sound. The most famous of these is the Dunlop Uni-Vibe, and although it doesn’t sound as close as other pedals to the real thing, it has become a famous sound in its own right. Rotary speaker effects often have controls for the speed of the effect, and can sometimes (such as in the case of the Uni-Vibe) be connected to expression pedals to control the speed on the fly. If you’re into 60’s psychedelic rock like Jimi Hendrix, this one’s a must.
For the hobbyist guitarist this is a great 'bang for the buck' investment. It has practice tools for the beginner but solid tones for the advanced guitarist. For home use, maybe even a garage band it's perfectly adequate. If I were a more serious musician doing gigs with high end audio going to the audience, I'd be investing more than a hundred bucks in my stage rig.
The 52-week part is an excellent way to motivate you to practice. The selection of licks is great too with several genres covered well. It provides info for setting your metronome to get the beat right too. They are challenging, especially when you play them at the recommended speed. The wide selection will give you plenty of choices even if you skip a genre.

Williamson went on to produce and play on Iggy’s classic solo 1979 album New Values, which features gems like “I’m Bored” and “Five Foot One.” The guitarist also played a key role on the follow-up disc, Soldier, anchoring a punk rock all-star lineup that included ex-Pistol Glen Matlock, Ivan Kral from the Patti Smith Band and Barry Adamson from Magazine. Shortly after Soldier, Williamson took a hiatus from rock to study electronic engineering, becoming Vice President of Technology and Standards for Sony.
Mentioned below are some of the tabs for guitar, that a beginner could practice. Take the guitar and let us first learn the 4 x 4 rhythm. Strum the guitar with a plectrum in downward and upward direction in the form of - four beats in each measure and the quarter note gets one beat. That is, strum the guitar strings (chord) 'Up-Down' 4 times a then just end it coming up after the 4th downward strum. Yes! You got it right. 'Up-Down' is 1 note (that needs to be played 4 times) and 'Up' is the half note (that needs to be played once). Practice this rhythm till you get your hands on it and then practice it, changing the guitar chords.
Maybe the most well known amplifier released under the Peavey name, the 5150 is the result of a collaboration between Peavey and Eddie Van Halen. Debuting in 1992, the 120-watt, all-tube, two-channel head featured a searing lead channel that helped usher in a new wave of high-gain guitar ferocity in the early Nineties. Since Van Halen and Peavey parted ways in 2004, the model name was changed to the Peavey 6505 and has become an industry standard for modern metal bands such as Chimaira, August Burns Red, All That Remains and others.
When people ask "What are the guitar string sizes?" they really want to know about the gauges, the term referring to the diameter of the string.  The answer is... that's not quite how it works.  Yes there are standard gauges but in several standard sizes like light, medium, and heavy.  Each, when properly tuned, will exert a different tension on the guitar's neck and if you jump to another size you'll probably need to adjust the truss rod and get used to the new action of the fingerboard.

These electric guitar tone tips from Guitar Control are money saving and time saving tips you can use to create great guitar tone without investing in anything other than the guitar you already own. Your volume control, your tone control, and your switches are a wealth of guitar sounds. Also, the way you play your guitar -- the dynamics. All of these elements can be used separately or together to build guitar tones into any of the solos you play. This is an awesome lesson for beginners because you can put these tricks to work immediately to get the results you’re looking for, and if you’re short on cash, these guitar tone tips will allow you to express yourself with tone without having to spend money.
BOSS also has a few pedals that make your instrument sound like some other instrument. The AC-3 Acoustic Simulator will do the job. Some effects change your sound with filtering. This effect type can be used in different places in the signal path, so we’ll use the GE-7 Graphic EQ. A few BOSS effects defy categorization, but are nevertheless very useful in any signal path. The most common of these is the CS-3 Compression/Sustainer.
1. Blackstar ID:15 TVP ($229): This is one of the best combo amps on the market and with good reason: it comes with a variety of options to not only get you playing in no time. It also allows you to record very easily with a built-in USB option. You can select from six different power responses modeled after popular tube amp sounds (via Blackstar’s True Valve Power system) and even when turned down, the amp doesn’t lose its bite. The built-in multi-effects allow you to experiment with the world of effects and the Insider Software allows you to edit up to 128 user storable patches to further your sonic crafting.
Epiphone's offering in the low and mid-range segment has been pretty strong for years. The Epiphone Hummingbird Pro is their take on a legendary Gibson model and it brings much of the same qualities. What really makes this acoustic-electric stand out is the overall level of quality you get for your money. You can trust it as an accurate emulation since Gibson now owns and produces Epiphone's guitars.
The way you connect your amp, speaker and DI box depends on whether the DI box has a built-in dummy load.If miking isn't practical, or you don't want to find space for a soundproof speaker/mic box, then perhaps one of the available DI options will give you the result you need. I was once reviewing an analogue guitar preamp that provided several programs, both clean and overdriven, and I noted that one of the clean settings sounded really superb. When I checked the manual, I found this was the bypass position! The reason it still sounded good was that the unit was matching the high impedance of the guitar to the medium impedance of the recording system and, for clean sounds, you can get this same effect by using any good-quality active DI box that offers a high-impedance (500kΩ or more) input. A little compression will add density and 'spring' to the sound (experiment with the attack time to get the best 'pluck' sound, as too fast an attack can squeeze all the life out), while reverb will put back the missing sense of space.
Our production/assemble time frame: 15 - 25 working days since our professional Control Team and Supervisor Engineer will ensure that your ordered guitar is top notch considering the fact that this guitar is intricate to assemble and they check very carefully every detail such as the finish, fret work, pickups, strings. And also, they will test the sound quality. We do not rush up the process of manufacturing your guitar since we would like to deliver to you best quality performance.
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
You can choose between tube amps, hybrids, or solid state models. The first are generally viewed as the grooviest. The latter are cheaper, more reliable, and require less maintenance. And the hybrids are often a practical compromise. (Keep in mind that watt for watt, tube amps are much louder than their solid state cousins with similar wattage ratings.)
I've only been playing guitar for 3 years but it seems like no matter what I do no matter what pedal I use I just can't get that real band sound like the heavy rock bands do on recording but when I tried a marshall that all went away. Marshall has the perfect distorted sound (overdrive) and for the price ha you just can't beat it. I'm getting a mg100fx half stack and it all totals out to only $400 plus this amp can get so loud you can play in a bar or club with only half volume
As one user put it, this is one of “Amazon’s hidden little gems”, with a good set of tube electronics that gives out a natural sounding overdrive and some crystal-clear rhythmic sounds. If you want to make your guitar sound clear enough to accompany Porcupine Tree while also having the option for a natural grainy sound that might work well for jazz and blues, then this item is definitely something to look into.  
The tone selector on an electric guitar controls the capacitor, which basically filters out high frequencies. The same way a high-cut filter (or low-pass-filter if you prefer) works on a standard equalizer. By dialing down the tone, you remove brightness and treble. The pickup selector does just what it's called.. Selecting which pickups being used to capture the vibration of the strings, and translates the energy into electric current, though the configuration and number of "presets" can vary from guitar to guitar, depending on how many pickups it has etc. If you're a handyman you can even configure this yourself.
The construction of an instrument is naturally a fundamental characteristic that pertains not only to playability, but the ultimate sound of the instrument as well. Durability will be affected by this as well. Guitar construction varies from brand to brand and model to model; instrument makers utilize a wide variety of materials to build the guitar body. Wood is the most common material associated with guitars, but plastic and metal are used as well. Construction should also be given extra consideration with electric guitars, as the electrical components serve as a secondary construction within the instrument.

This project began as a quest to find a really good software piano. Not even the expensive commercial versions were satisfying to my ears.  Most had velocity switching problems and unpleasant tones. I came across the University of Iowa Steinway piano samples which were great but there was room for improvement in the way they were presented.  My goal was to have a selection of piano and other instruments that were pleasant to play and to keep them available for free. Using SoundFont editing programs Polyphone and Viena I have done some editing to allow for expression to give a more enjoyable and realistic playing experience where timbre changes gradually with velocity where possible and without that annoying jump that is commonly found. This was applied to many of the other instruments as well.

Maton earned international renown for their superb acoustic and electric guitars and basses, which have been played by scores of famous performers from The Easybeats to The Wiggles.[1] George Harrison owned one of their MS500 models, which were introduced in 1957 and famed British session guitarist Big Jim Sullivan owned and used a Maton ‘Cello’ guitar for many years during the peak of his career, playing it on recordings with Sarah Vaughan, Sammy Davis, Jr., Johnny Keating and his Big Band and Neil Finn from Crowded House.

The first time you plug this Les Paul into an amp, the sound that comes out will put a smile on your face. It’s that vintage growl of a legit PAF that you can’t really recreate completely with anything else. We pushed a Plexi into overdrive and rolled off the volume a bit for that true rock tone. We weren’t disappointed. Gibson Les Paul Standard Heritage Cherry Sunburst brings that same epic tone which the whole series is known for.
It has been stated repeatedly that the CEO is a challenge, toxic whatever and yes, all of it is true. Many if not most people who take a management position here don't last a year. This is especially true at Corporate where at any given time half of the positions are open because employee turnover is off the charts and they are horrible at recruiting talent to get replacements hired. That's a really bad combination to have in a company. So the first question you have to ask yourself is: do you want to show a job that only lasted six to twelve months on your resume with a company that has a positive, almost cult like global brand image? Or another way, how will you explain your short tenure to the next company you interview with and make them believe you weren't the problem? When I was outside Nashville and told people I worked for Gibson 100% of them said "that's a great company" even though they had no clue. It's highly likely your next potential employer will think that way as well.

You asked, and you shall receive, Sonicbids blog readers. Per multiple requests, here's my guide to, "When the hell do I start turning these knobs, and where do they go?" But before we begin, I offer you the fine print: These references are general ideas for where to begin to look for sonic issues with particular sounds, instruments, and voices. I'm not going to tell you "always notch this 9 dB here and add 3 dB here with a wide boost and, voila, perfect sound!" because it's unfortunately just not that simple. So before you message me, "Aaron, I notched out so much 250 Hz out of my snare, I snapped the knob off the console, and it still sounds muddy!" just know that not all sound sources are created equal.

I wish I knew what goes on in there. I'm told it is a simple cut of the laminated neck and then the tone block is glued to the back. I hope it is that simple as I am about to perform some major surgery on my 9 ply neck to acomidate this construction technique . If any body out there can lend some advise on this , please do so I don't turn my bass into a clock!
The Telecaster was important in the evolution of country, electric blues, funk, rock and roll, and other forms of popular music. Its solid construction let guitarists play loudly as a lead instrument, with long sustain if desired. It produced less of the uncontrolled, whistling, ‘hard’ feedback (‘microphonic feedback’) that hollowbodied instruments tend to produce at volume (different from the controllable feedback later explored by Pete Townshend and countless other players). Even though the Telecaster is more than half a century old, and more sophisticated designs have appeared since the early 1950s (including Fender’s own Stratocaster), the Telecaster remains in production. There have been numerous variations and modifications, but a model with something close to the original features has always been available.

Schecter has built a strong reputation for itself as one of the best manufacturers of affordable guitars for musicians worldwide. Their commitment to quality and innovation has made them a leading brand name for high quality guitars that are affordable for every budget. The Schecter Hellraiser C-1 Electric Guitar is one of their flagship electric guitars that not only delivers performance, but also uncompromising quality.

With Guitar Tricks I get everything I need in one place. The core learning systems for beginners, for blues rock and country, the songs, the genre specific exercises, an active user forum and a series of tools. I specifically like the Jam Station tool. It includes a number of backing tracks in different keys and tempos for most of the genres being taught on the Guitar Tricks platform. With Guitar Tricks I get everything I need in one place.Other useful tools included are a scale finder, a metronome, a chord finder and a fingerboard trainer. Guitar tricks is continually improving. A new interface has just been added that makes it look more modern and very attractive. The core learning system lessons are also updated on an ongoing basis. This allows them to incorporate the latest teaching methods and keep the lessons modern and relevant.
Similar to five-string bass guitar tuning, seven-string tuning allows for the extra string a fourth lower than the original sixth string. This allows for the note range of B standard tuning without transposing E standard guitar chords down two and a half steps down. Baritone 7-string guitars are available which features a longer scale-length allowing it to be tuned to a lower range.

I've owned and played Martin, Ovations, Fender, and Gretsch acoustics but none has thrilled me more than the Breedlove Concert Pursuit with cedar top. The tone is definitely different - so balanced and the midrange really shines. Absolute joy to play despite this is not their top line. Not so much a strumming guitar - shines when finger picked. Last but not least, the tone when plugged in is so deep and warm it astounded me. Far better than the others I've had.
You may love only one style of music. And that’s fine. But try playing some other styles. Funk maestro Carlos Alomar went through hell on David Bowie’s Scary Monsters (and Super Creeps) album, being asked to play more “grinding” guitar alongside Robert Fripp. “It was very interesting,” says Alomar. “I learned a lot and when I came back to my more natural style, I felt really fresh about it.”
Synthesizer: Plug your bass guitar into a synthesizer pedal and you can access four different waveforms (saw-tooth wave, square wave, pulse wave, or your own bass wave form) that give you a wide variety of synth tones, each of which can be tweaked in several different ways. Some synth pedals offer a hold function that continues to play the tone as long as you depress the pedal, allowing you to play other musical phrases over the tone that's being held.               
We have taken a look at the many varieties of electric guitars available in today’s market (you can read about the types of acoustic guitars and even guitar strings as well).  With this many options, it is wise to consider the genre and tone you are searching for by researching what your favorite artists choose to craft their sound.   Your choice may be based upon visual appeal and cool factor, but make sure the instrument you choose is capable of producing the tone of the style of music you play from your heart!  It's a large selection of body styles but hopefully now you're also comfortable with all of the sounds of the various types of electric guitars.
Effects are often incorporated into amplifiers and even some types of instruments. Electric guitar amplifiers typically have built-in reverb and distortion, while acoustic guitar and keyboard amplifiers tend to only have built-in reverb. Some acoustic instrument amplifiers have reverb, chorus, compression and equalization (bass and treble) effects. Vintage guitar amps (and their 2010-era reissued models) typically have tremolo and vibrato effects, and sometimes reverb. The Fender Bandmaster Reverb amp, for example, had built-in reverb and vibrato. Built-in effects may offer the user less control than standalone pedals or rackmounted units. For example, on some lower- to mid-priced bass amplifiers, the only control on the audio compression effect is a button or switch to turn it on or off, or a single knob. In contrast, a pedal or rackmounted unit would typically provide ratio, threshold and attack knobs and sometimes "soft knee" or other options to allow the user to control the compression.
The Takamine GD71CE is a feature packed acoustic-electric guitar, with its solid top construction, visual embellishments and improved electronics. Takamine equipped this guitar with a solid spruce top and rosewood for the back and sides - a nice tonewood combination known for its articulate sound. It also comes with matching aesthetic appointments that include maple binding for the body, neck and headstock, abalone rosette, rosewood headcap, maple dot inlays, gold die-cast tuners with amber buttons, and the body is wrapped in a nice looking gloss finish. In addition to all this, the Takamine GD71CE is equipped with their TK-40D preamp system which gives you more control over your amplified sound with its mid contour switch, 3-band EQ with bypass and notch filter.
Capture ideas and create songs easily with a riff-based workflow, loop recording, automatic track creation (4 tracks), 7 guitar-oriented effects, support for amp models (AmpliTube, PodFarm, StudioDevil and others), 1 InstantDrummer (expandable), and more. Stay in the creative flow with tools that look like gear, and create complete songs without putting down your guitar!
During World War II, instrument manufacturing at Gibson slowed due to shortages of wood and metal, and Gibson began manufacturing wood and metal parts for the military. Between 1942-1945, Gibson employed women to manufacture guitars. "Women produced nearly 25,000 guitars during World War II yet Gibson denied ever building instruments over this period," according to a 2013 history of the company. Gibson folklore has also claimed its guitars were made by "seasoned craftsmen" who were "too old for war."[13][14]

I start at zero and work the bridge, stopbar, neck and pickups from there until I all feels and sounds right, takes some time but not too much. I only do this with new guitars and when I total strip one down maybe once a year. Living in the North East and having 4 season you have to adjust all the time, unless you live in a climate controled home and never go out. If you can do all these adjustments yourself and become one with your guitars I think your way ahead of the game.
The idea behind a piezoelectric pickup is more or less the same as with any regular electric guitar pickup. Guitars which utilize this system have a piezoelectric pickup located under the bridge. Once you pick a string, the sound vibration from the string is then interpreted by the pickup, generates an electrical signal, and is then fed into the preamplifier to be boosted to line-level.  You can think of it like a microphone's diaphragm.
“The acoustic guitar is something you can travel with easier and make money with easier,” Salas said. “When I used to tour with Rod Stewart, we had jets and gigantic trucks but now there’s no record-company support so no there’s tour support. Record companies aren’t offsetting the tour expenses because they can’t make their money back in record sales.”

"I have purchased 15 personalized guitars from the top guitar custom shop. All the guitars have met or exceeded my expectations. Great workmanship and quality work. An exceptional group of people to work with. They are ready to answer your questions or concerns. The one time i had a concern about a guitar they responded immediately and handled the situation more than i expected. I highly recommend this company!" Dr E C Fulcher Jr - Abingdon, Maryland USA.
Preamp, or gain, controls (sometimes called “volume” on master volume–equipped amps) let you dial in impressive-sounding distortion at low volumes, but excessive preamp distortion can sound too compressed and sizzling at high volumes. Turn down the gain and crank up the master volume until the amp is set at the output level you’d normally play at. Now, slowly increase the gain until the sound becomes as distorted as you want it to be. If the tone is buzzy and lacks dynamics, the amp will have all the onstage presence of an American Idol reject.
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it.  Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low!  Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone.  I was so happy and asked him how much, he said it was easy so he didn't want take any money.  But i have him some coffee money and he said it was too much, I said it was for a week and he laughed.  My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems.  Steve is a hidden gem in the Boston guitar world.
I taught myself how to play on a beat-up old acoustic decca my mom let me have. I couldnt begin to guess how old it is, but it must be just that; its serial number is 129! It has a pretty decent sound, but i really should replace the strings. it has 18 frets and marks at 5 7 9 and 11. Theres no pickgaurd, the body is orangish wood with thick finish and the neck is some sort of dark wood. The damn thing gave me headaches when i was learning because the strings were so far from the fretboard and all incredibly thick too. It came with extra strings and medium and heavy picks. I dont think it would be worth too much now, especially in its condition.
Several concert sound subwoofer manufacturers suggest that their subs can be used for bass instrument amplification. Meyer Sound suggests that its 650-R2 Concert Series Subwoofer, a 14-square-foot (1.3 m2) enclosure with two 18-inch drivers, can be used for bass instrument amplification.[23] While performers who use concert sound subwoofers for onstage monitoring may like the powerful sub-bass sound that they get onstage, sound engineers may find the use of large subwoofers (e.g., two 18" drivers) for onstage instrument monitoring to be problematic, because it may interfere with the "Front of House" sub-bass sound.
Whenever I can do that, it’ll be a good day. Instead, we’re looking for a the correct combination of quality and cost, just like the aforementioned guitars. Ibanez usually gives you a great guitar for what you pay, so here we’ll narrow things down a little more and look at some of the best Ibanez guitars and "honorable mentions" for our greater list.
{"id": "114096449", "categoryId":"site5AAG", "name":"Used XM-DLX Solid Body Electric Guitar", "pageUrl":"/Used/Washburn/XM-DLX-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"", "priceMin":"", "priceMax":"", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Washburn", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"", "priceVisibility": "", "itemType": "Used"}
Shreddage 2: Absolute Electric Guitar is our answer to the challenge of total guitar sampling. It is a complete instrument with elegant scripting, intuitive mapping, and incredible depth. This virtual guitar for Kontakt is the ultimate weapon for rock & metal music, built from the ground up for realistic playing in any hi-gain style. All samples were recorded on a 7-string guitar and are provided clean/DI so you can use your own custom amp tone - or use the included Peavey ReValver HPse.
The woods used on the body and neck are worth considering too, although are unlikely to be a defining factor when you consider your purchase. Basswood features heavily as the body wood of many guitars in this price range because it’s affordable and has decent tonal properties. You will also find cheaper to produce woods like poplar and alder, although the traditionally more premium mahogany is also found on affordable guitars these days.

“A magnet doesn’t have a tone, per se – you can’t put it to your ear and hear anything. It’s really the engine that drives the coils in a pickup. In a humbucker you’ve got a bar magnet located under the coils; if it’s a Stratocaster or a Telecaster you’ve got magnetic rods that are in the centre. But essentially they’re all doing the same thing: throwing up a magnetic field that the guitar strings vibrate in when they’re plucked.
But…Don’t/Never Solder on to a Closed Circle!…Because…If a very strong DC Electric Current Reaches your Axe…It Could…Kill/Maim!..With a AC Current you may if you’re lucky just get your fingers burnt!…You’ve just got to have a Break Somewhere!..So that in The Event of an Electrical Overload!..The Excessive Load can..Drain Itself off!…It’s an Electrical Safety Precaution!…Just like a Fuse!
Tube or solid-state? One has the nice warm vintage tone, but the other is just so much simpler and free of hassle. Vox make one of the best hybrid amps, which heats up your guitar signal with a proper 12AX7 tube in the preamp before it becomes amplified by conventional transistors to deliver up to 30 Watts. A warm tone with smooth overdrive, but without the aggravation.
Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]
The Little Lady is very similar to the 38C, but on a pearwood comb and with different cover plate art. It is technically a playable harmonica, but it is generally regarded as a knick-knack piece that can be used as personal jewelry. It is also available as a keychain. The Little Lady holds the distinction of being the first musical instrument to be played in outer space.[30][31]
What we consider as standard size today were not so standard back in the '30s. Back then the "parlor guitar" or "blues box" was commonly used, with its compact body and mid-emphasized tone. Many artists used this instrument to shape many of the musical styles that we have today. The L-00 Standard from Gibson captures the iconic "blues box" faithfully for today's players, adding in their premium touch and modern tech that results in a true timeless museum quality instrument.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=155.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prod361014, MSRPRange=false, enablePDPColorOption=false, showBrandNameWithProduct=true, restockStartAmount=null, priceVisibility=1, listPrice=155.0, salePrice=155.0, isOnSale=false, showMSRP=true, restockCount=0}
Although there are now several digital guitar recording preamps which model amps and cabs, the Roland VG88's split pickup system allows you also to experiment with modelled guitars and pickups.Digital noise removal plug-ins (again best used before delay effects are added), produce even fewer side-effects and so may be the best option when recording into a computer-based system. However, you can often achieve a worthwhile improvement using simple low-pass filters — before I moved over to working almost exclusively on the computer, I often used the side-chain high-cut filter in my Drawmer DS201 gate to remove hiss from guitar tracks. The sharper the filter, the less the wanted sound will be affected, so a plug-in with an 18 or even 24dB/octave slope should be even more effective than the 12dB/octave filters the Drawmer uses. The trick when setting them up is to pick the lowest shelving frequency that doesn't materially change the original sound, other than to take the edge off the hiss. Using filters in this way also helps reduce finger noise and squeaking on acoustic guitar parts and can even help disguise moderate clipping distortion caused by recording at too high a level.
Intonation is difficult since the bridge is a bar of metal with grooves cut into the top. The whammy bar works and provides a nice warble in a limited range. Action is a bit high at the moment, and adjustment is limited to bridge height unless I shim the neck (no truss-rod adjustment is obvious). Still, the short scale and light strings make it easy to play anyway.

One final thought, although we're selling guitars here this is clearly a labor of love. If works out and can sustain itself we will be expanding the site. If you're not into buying a guitar now you can pick up a cool T-Shirt with a Rockin' Silvertone Guitar on it!. We will be adding new designs shortly to the t-shirt offerings. So stay tuned for more information or not!
The solid body guitar is a rock ‘n’ roll machine at its core, but appears in all genres of music and is more popular than hollow body or semi-hollow body guitars due to its wider variety of tones and improved volume and feedback characteristics. Some, like the Les Paul, have arched tops like hollow and semi-hollow models. But the majority are flat-bodied, including Gibson Flying Vs, Explorers and SGs, and classic Epiphones, like the Wilshire.

Hey! I just opened up my 1984 g&l for the first time today and I found a design very similar to this. I had always loved the tone control on it but was too nervous to open it up for whatever goofy reason. I may try to draw it out and share it but maybe include a picture at some point as well. I’m glad someone else has looked at this because it definitely threw me for a loop when I first saw the two caps both headed to ground.

Electric guitars are capable of producing a multitude of different sounds, ranging from the purest cleans right through to saturated distortion and feedback. Many factors influence the final recorded sound; the type of guitar and amp, and any stompbox or rack-mounted effects used will shape the initial tone. The choice of microphone(s) and mic’ing techniques, too, along with any studio processing, will also contribute to the end result. Your playing style is also crucial; experiment by playing with fingers or a variety of plectrum gauges until you get the right attack. While most guitarists play with a pick, coins can also be used to produce interesting harmonic overtones – just ask Brian May or Billy Gibbons.

Recently while cruising around EBay I was able to find pretty strong evidence that the 700 and 800-series Kents were made by Kawai. Or maybe... the necks of the 700 and 800-series Kents and the Kawais were made by the same manufacturer. I don’t know if Kawai kept the factory that made Teisco operating after it was acquired. It appears that Kawai had more experience building hollow-bodied guitars than Teisco. So I call the 700 and 800-series Kents Made by Kawai. You can call them Made by Teisco if you want. Of course, the possibility exists that they were both made by an entirely different company. Who knows? The 1960’s were like a ‘wild west’ period of Japanese guitar making.
This depends on personal preference; changing the order of drive pedals changes how they sound when used together. For instance, a clean boost placed before a heavy distortion or fuzz will result in a louder boosted signal hitting the heavier distortion circuit which in turn works that circuit harder and you get heavier distortion. If you place that clean boost after the heavy distortion, it will just make the original distorted sound louder. Experiment with different placement order and you will find your own preference.
National Reso-Phonic Guitars - World renowned for their resonator instruments. Unlike acoustic guitars, where the vibration of the wooden body creates the sound, in a resonator instrument the body acts as a speaker cabinet. When the strings are plucked, the vibration is transmitted through the saddle to the resonator. The resonator, or speaker cone, then amplifies that vibration.
Vox is a musical equipment manufacturer founded in 1947 by Thomas Walter Jennings in Dartford, Kent, England. The company is most famous for making the Vox AC30 guitar amplifier, used by The Beatles, The Rolling Stones, The Kinks, The Yardbirds, Queen, Dire Straits, U2 and Radiohead, the Vox Continental electric organ, and a series of innovative electric guitars and bass guitars. Since 1992, Vox has been owned by the Japanese electronics firm Korg.
My guitar is in excellent condition and is all mostly original. The tuners are replicas of the original Klusons, and it came with non-original wooden legs. The legs were originally `sold separately, so it’s possible that the original owner opted for cheaper off-brand legs instead. I prefer to use a table-type keyboard stand anyway, mainly because it frees up more space for my feet underneath. This is my primary gigging steel; it’s reliable and versatile, and it usually turns a few heads as well due to its unique appearance. Aside from a broken name badge, it’s in excellent condition; it came with the cleanest original Valco case I’ve ever seen. There is some slight deterioration of the chrome plating, but otherwise there is little wear to be found. I previously owned a Supro Console Eight, and liked it so much that I traded it for the double-neck version. The Console Sixteen is a rare bird because it was produced only briefly; it first appeared in the 1958 Supro catalog and last appeared in 1959.
Gilmour was made famous by his haunting guitar scores in Pink Floyd. This “replacement” guitarist surpassed expectations and helped shape Pink Floyd’s unique sound. You can always expect hairs at the back of your neck to stand whenever you hear one of his solos – be it for the first or hundredth time you’re listening to it. All the emotion that Gilmour’s poured into his guitar work lives on in the music and is channeled through anyone who’s ever wanted to cover a Pink Floyd song. I know several guitar players (myself included) who whenever playing the Comfortably Numb solo – whether they are alone in their bedrooms or on stage – have always been unwillingly brought to tears, near the point of crying. How could you not expect things to get esoteric and mystical when it comes to music?
Went here for the first time yesterday to get the strings replaced on my acoustic guitar. Kevin, the owner, completely encompasses the definition of true customer service. He not only was professional, courteous and friendly but also willing to talk me through the process as he was re-stringing my guitar when I asked if I could watch and learn. I highly encourage coming here, especially for a an excellent and personal experience! I will be back no doubt!
All that being said the best guitar is the one that allows you to express yourself to the best of your ability and makes you feel good doing so. If you need a custom shop Les Paul to do it then by all means go for it. If a Godin or Ibanez or Dean or Jackson is the one for you who are we to tell anyone they are wrong. Personally I think the best guitarists on the planet play Telecasters! :-)
Most bass speaker cabinets employ a vented bass-reflex design, which uses a port or vent cut into the cabinet and a length of carefully measured tubing or pipe to increase the low-frequency response and improve the speaker system's efficiency. To give an example, if one compares two bass cabinets, each with the same type and power of power amplifier, one cabinet being a sealed box and the other being a vented or ported cabinet, most listeners will perceive that the ported cabinet produces more bass tone and deeper bass tone. Less commonly, some bass speaker cabinets use one or more passive radiator speakers, a voice coil-less "drone cone" which is used in addition to a regular woofer to improve the low frequency response of a cabinet. Passive radiator speakers help to reduce the risk of overextension. Acoustic suspension designs with sealed cabinets are relatively uncommon because they are less efficient. Some cabinets use a transmission-line design similar to bass-reflex, and in rare cases, some large cabinets use horn-loading of the woofers (e.g., the Acoustic 361 18" speaker cabinet from the late 1960s).
Buddy Holly was one of the pioneers of the Stratocaster and used the instrument on virtually all of his songs with the Crickets. During the recording of “Peggy Sue”, rhythm guitarist Niki Sullivan was not needed for the song, and instead stood next to Holly, and flipped the selector switch of Holly’s guitar from the neck pickup to the bridge pickup for the guitar solo.
SOLD OUT ...Here is yet another GREAT Sounding and PLAYING Nippon Gakki 000 Red Label made in the famous Nippon Gakki plant in Japan. Absolutely surprising Booming tone from a small package who would have guessed these sound so great... This one is in excellent vintage condition that is to say all the important structural components of this guitar are in good shape that is to say that this guitar has GOOD BONES…. NO CRACKs its neck angle alignment is still good to this day its top is for the most part flat and its Bridge is nice and tight to its top … it appears to be a solid two piece center seam Sitka Spruce top and its cross braced like an old Martin , This guitar is over 40+++ years old and has been played and is not mint of course it has its share of superficial dings and drinks but nothing that can deter its ability to play great and sound great and look Fantastic with its Vintage Amber top and lush PATINA its a classic 000 that has THE SOUND!…. When we received it I loved the sound immediately it was pretty deep and rich sounding for such a small guitar with old cruddy strings I was thinking but like many of these Old Yamaha’s the action was too high so I did have to do our full JVGuitars UPGRADE set-up to it so I stripped its old strings off..its cheap plastic nut & saddle and bridge pins tossed to garbage, its fingerboard was remarkably clean and rut free and the pearloid inlays look great vivid with that patina of 40+ years and the frets were not bad with just minimal groves so I adjusted true rod -leveled -dressed & polished the frets, cleaned fingerboard and Lemon oiled the rosewood fingerboard and the bridge which is crack free as well.. all is looking and feeling great now.. Then using hyde glue installed a Martin Bon nut and a compensated bone saddle was fit following up with a quality set of fancy Rosewood bridge pins with Abalone and brass ring they fit sung for optimum tone resonance transfer. This has made a markable improvement in its resonance and its a bit louder now too SWEET sounding now! When we got this one it has a small chip at sound hole just under the fat bass E string looks like an aggressive finger style did the damage and was at the sound hole edge and I have successfully repaired this same sort of spot before so I wasn’t worried this one was nick named “Chip" for this reason I since repaired the spot using the professional woodworking Mohawk system of melting in a resin bar with jot knife that was spruce color then graining the repair and top coating brush tip matching lacquer to the repair spot area to blend…. its not really noticeable anymore now and is a non issue. I did notice that someone changed the tuners for other old Yamaha FG tuners tiny holes didn't line up but this makes no difference in performance what so ever and is not even noticeable they are Yamaha tuners. Overall structurally this guitar is still in top condition players and it really has that beautiful vintage 40+++ year old Martin like Patina aura about it.... i its VINTAGE PATINA and character is absolutely beautiful this is in the eye of the beholder of course but if your vintage lover you’ll appreciate this instrument for what she is. This Old guitar plays like a $ MUCH more expensive guitar any day... People of all walks of life worldwide on the net are comparing the sound of theirs to a Martin it take years for a guitar’s tone to naturally open up like this guitar has set up and plays and sounds amazing and the price is right Questions or to buy it contact Joe at: .
Modern electric guitars most commonly have two or three magnetic pickups. Identical pickups produce different tones depending on location between the neck and bridge. Bridge pickups produce a bright or trebly timbre, and neck pickups are warmer[when defined as?] or more bassy. The type of pickup also affects tone. Dual-coil pickups sound warm, thick, perhaps even muddy[citation needed]; single-coil pickups sound clear, bright, perhaps even biting[citation needed].