Treble is really a form of gain boost that must be considered while gain-staging our signal path. With good tone, a note should ring like a bell, not slaughter like a machete, and that is accomplished by shaving some attack off the waveform and rounding off the frequency response. A bit off rollback on the tone knob takes you into the ballpark, along with your amp settings (I have a dedicated treble-cut on my AC30 that is necessary to tame my telecaster). Once I am in the ballpark, I use the volume knob to fine tune, and personally I tend to let it be from there, relying on a gain-boost pedal to lift my sound when necessary without altering the tone.
"Craftsmanship, materials, and dimensional design are combined to make this one of Alvarez' most outstanding models. It has fine projection, sensitive response, and speedy action. The inlaid Tree of Life design on the rosewood fingerboard adds to its graceful distinction. Sides and back of flame grained rosewood are bound with ivoroid. Machine heads are chrome enclosed for longer life. Tuning is fast and precise. Slender mahogany neck with adjustable steel rod reinforcement. The top is select spruce chosen for its acoustic quality."
{"pageName":"[gc] pdp: samick artist series electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","products":";114368474;;;;evar65=Used-Guitars-Samick","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}

{ "thumbImageID": "Brian-May-Signature-Electric-Guitar-Antique-Cherry/512637000593000", "defaultDisplayName": "Brian May Guitars Brian May Signature Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274319719826", "price": "849.99", "regularPrice": "849.99", "msrpPrice": "1,308.00", "priceVisibility": "1", "skuUrl": "/Brian-May-Guitars/Brian-May-Signature-Electric-Guitar-Black-1274319719826.gc", "skuImageId": "Brian-May-Signature-Electric-Guitar-Black/512637000001000", "brandName": "Brian May Guitars", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Brian-May-Signature-Electric-Guitar-Black/512637000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Antique Cherry", "sku": "sku:site51274319719831", "price": "849.99", "regularPrice": "849.99", "msrpPrice": "1,308.00", "priceVisibility": "1", "skuUrl": "/Brian-May-Guitars/Brian-May-Signature-Electric-Guitar-Antique-Cherry-1274319719831.gc", "skuImageId": "Brian-May-Signature-Electric-Guitar-Antique-Cherry/512637000593000", "brandName": "Brian May Guitars", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Brian-May-Signature-Electric-Guitar-Antique-Cherry/512637000593000-00-60x60.jpg", "imgAlt": "" } ] }


If you know how to play an E major chord, then you know how to play an A minor chord—just move the chord whole shape over a string. Make sure your first finger is curled, so the open first string rings clearly. Avoid playing the open sixth string when strumming the A minor chord. There are situations when it makes sense to reverse your second and third fingers when playing the A minor chord.
A musician is only as good as the songs he or she plays - except when you're improvising, of course! And even for those of us who write mostly our own music, there's always room for a repertoire of the classics. Building up your musical library starts with the tablature available in this section, and where it ends is up to you. If you're like most musicians, you'll probably spend your whole life collecting and trying your hand at new music. And with material here for guitar, bass, ukulele, banjo, mandolin and even violin, there's something for virtually everyone. Cover the songs in your own personal style or try your hand at recreating them as they were first recorded; it's up to you.

That's actually a good question. There were several people working on the electric guitar at the same time... so it depends on what you're looking for, and what constitutes a real electric guitar. And to compound the issue, tape recording was also in an experimental stage, back in the 1930s when the electric guitar arose. So live recordings of early performances pretty much don't exist.
• Why frets come loose: Wear from string contact, fretboard drying and jarring mid-gig or during transportation can cause frets to pop loose. And if binding loses moisture, that can cause the ends of frets to rise or be exposed. These all create troubles that can wrongly be blamed on the more typical problem of fretwear, but in these cases dressing or replacement isn’t necessarily the answer. If there’s enough fret wire left, a loose fret can be reseated in its slot along the fingerboard, and a skilled luthier can often fill the gaps between the binding and the fret ends.
We’ve had a lot of fun looking at all of these great online guitar electric acoustics, and hope that among or top ten is your next instrument. There’s a lot to read through and consider, but we’ve been sure to make sure there’s something for everyone here, and all of the guitars come highly recommended. Read through the buyer’s guide if you’re new to electric acoustic guitars and aren’t 100% sure of what you’re comparing between electric and acoustic, and then make your purchase knowing you’ve made the right decision.
Lyndon Laney established his brand in 1967 in Birmingham (England). In those days, he was also playing in a band with a couple of guys you might've heard of: John Bonham and Robert Plant. You might also know Tony Iommi (Black Sabbath) who happened to be one of his first clients. The LA100BL is a must among heavy-metal guitarists, while the KLIPP aims to be more versatile. The AOR (Advanced Overdrive Response) series provides more gain every time, contributing, in part, to the brand's constantly growing reputation. Among Laney addicts, we could mention Ace Frehley of Kiss and Mark Knopfler of Dire Straits.
The core of this guitar is its twin horn double cutaway mahogany body, which follows after the original SG. But as expected in this entry-level price range, they exchanged what's supposed to be a mahogany neck for maple with 12" radius rosewood fingerboard. Specifications remain faithful to the original, with a scale length of 24.75" and 1.68" nut width. The generic pickups installed sound surprisingly good for the price, but like many have done, the pickups can be easily swapped out for more hard hitting humbuckers to get more out of the guitar.
Back in the mid-60s, a desire for independence in business led to John Skewes forming a small musical instrument agency and wholesale business based at his home near Leeds, England. Over time, his new business steadily began to take off, and soon included throughput of some self-branded lines of musical merchandise. That effective early decision to carry self-branded merchandise continues to this day, with their signature Vintage® acoustic and electric guitars and basses which were first produced and sold in 1985. Today, Skewes is the largest family-owned independent musical merchandise distributor in the U.K. and the Vintage ‘family’ includes Fret King® electric guitars, Pilgrim® Banjo’s and Mandolins, Laka® Ukuleles, Encore® electric and acoustic guitars, and Kinsman® cases.
Of all the positions GC interviews for, tech has the highest standards and is arguably more demanding in terms of hours worked and product knowledge required than store manager. The tech for the store I worked at frequently worked 60+ hours a week to keep turn-around time to a week or less and his set-ups were so good and in such high demand that the store got an exception to the chain-wide $35 set-up price to charge $50 in hopes of lightening his load/keeping his overtime down, but he still got just as much work as he did before. If you're unsure about the reputation of your local GC's tech, don't be afraid to call the other stores and ask them who the best tech in their district is, because they'll usually be pretty straight forward with you. Most GC sales people have had their instruments set up by their in-store tech at least once and if their tech isn't very good, they'll tell you who you should go to if you want good work done because it's an absolute pain in the ass dealing with a customer whose instrument wasn't set up right when the tech is gone for the day and having to deal with the tech's fuck-up.
Do you have an old guitar that requires knowing how to repair a damaged guitar body? Read on and learn some neat tricks for repairing body damage on a guitar. Body damage on a guitar ruins the acoustics. Body damage on a guitar body really make it useless in the playing arena. If you are looking to bust out that old guitar but need some handy advice on how to repair some old damage, MadeMan has the fixes for you. This article will give you the fixes for larger damage and the annoying little nicks and teach you the way to repair them.
Guitar FX BOX does REALLY real-time DSP. Signal is sampled from sound card input, processed and then sent to the output with VERY LOW LATENCY. Unlike many other "real-time" audio programs, I/O delay with Guitar FX BOX is extremely low, virtually undetectable! This is achieved using DirectSound (or WDM streaming) for fast access to the hardware (sound card) and fast DSP algorithms optimized for real-time processing. Through DirectSound, latency is about 20ms with most sound cards, or even less. When WDM streaming driver is used, latency can go as low as 5ms! Nevertheless, exact total i/o latency still depends on hardware/drivers.
One of the newer brands on this list, Jackson Guitars was established in Glendora, California in 1980. However they’ve made a huge impact to the world of metal, and their guitars are used by some of the biggest names – Randy Rhoads, Adrian Smith, and David Ellefson to name a few. Some of their most famous models include the Soloist, and the Rhoads.
On round hole martin guitars, the serial and model numbers are stamped on the neck block inside the instrument. The number can be seen by looking inside the sound hole. Look at an angle towards the neck. All f-hole Martin archtops have their serial and model numbers stamped on the inside center of the backstripe, roughly under the shadow of the bridge (and best seen from the bass side "f" hole).
Ibanez' strategy to have virtuoso guitarists as endorsers have paid off big time, allowing them to not only produce signature instruments, but to also improve on their production line guitars using the ideas they compiled from various artists. Among their many signature instruments, the Ibanez JEM series is easily one of the most easily identifiable, thanks to its affiliation with guitar wizard Steve Vai and its unique monkey grip handle, which is carved into the body.

{ "thumbImageID": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000", "defaultDisplayName": "Warwick German Pro Series Corvette $$ 5-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Satin", "sku": "sku:site51500000138039", "price": "2,069.99", "regularPrice": "2,069.99", "msrpPrice": "2,699.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin-1500000138039.gc", "skuImageId": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin/K36090000002000", "brandName": "Warwick", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin/K36090000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Burgundy Red", "sku": "sku:site51500000072276", "price": "2,199.99", "regularPrice": "2,199.99", "msrpPrice": "2,849.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red-1500000072276.gc", "skuImageId": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000-00-60x60.jpg", "imgAlt": "" } ] }
First of all, the staff are incredibly amazing, lovely, hilarious and helpful.  My bandmates and I are not the most knowledgable in terms of gear, and the first time we came in wanting to get our first our ever guitar petals, Blake actually drew a graph of sound to explain how guitar pedals worked. They are the absolute best. Helping us out and going above and beyond what staff should be expected to do.  Hands down my favorite guitar store in Seattle, great selection, prices and above all the attention to detail and friendly attitude of the staff.  Can't rave enough!  Definitely found my guitar store for life!  Would recommend for all your guitar needs :)
The question is, does koa do anything for the sound, or is it just for the esthetics? The material in instruments always affects the tone, and koa makes the tone brighter while still being deep and satisfying. Sound is always hard to describe in words, because we experience sound differently, but if you’re curious about what it sounds like, just check it out on YouTube.
After a peak in the 1970s, driven by the use of several high profile players, another lull occurred in the early 1980s. During that time, CBS-Fender cut costs by deleting features from the standard Stratocaster line, despite a blues revival that featured Strat players such as Eric Clapton, Stevie Ray Vaughan, Robert Cray and Buddy Guy in their choice of the Stratocaster as a primary blues-rock guitar.[citation needed] Yngwie Malmsteen is known for playing a Stratocaster in the Neo-Classical genre.
Here we have a great D-28 clone from the finest Matsumoto Japanese guitar factory with a lot of history of making premium guitars Aria this is a AD-35 model these high quality D-28 copy’s were made in Japan for a short time frame of about a decade or so I believe discontinued in early to mid 1990’s for the Japanese domestic market not seen in the US until recently. Aria Dreadnought / Aria Auditorium SERIES The pursuit of perfection - This was Aria’s theme pursuing continuously ever since they started to manufacture guitars in 1956. This Aria Dreadnought / Aria Auditorium series lent brilliance to the early and middle days in the history of Aria acoustic guitar they know how to make great guitars this is model is no exception. The high standard for workmanship and materials are simply second to none. This instrument produces a Rich sound and offers the intermediate - pro grade playability from the determined beginner to the accomplished player. With its premium Solid Sitka Spruce top, will increase the volume and dynamic complexity of sound as you play it more and more. Noted Japan’s advanced finishing skills learned over decades this gloss vintage thin poly finish allows tone to jump of its sound box. AD-35 features Solid sitka spruce top and beautiful rosewood back and sides -bridge and fingerboard, the body binding, the center line of the body back and so on. I believe the original brochures specs were all solid woods on this run from Aria I look and can not tell you be the judge for yourself. This is recommendable model to guitar players who want to own a high end Martin D-28 but on a realistic budget you wouldn’t compromise much here surprisingly. This example has been upgrades here at JVGuitars with a Martin bone nut and compensated saddle - solid ebony decorotive with Abalone detail bridge pins and new set of Martin Marquis strings .... she has been fully cleaned and polished from headstock to bridge pin and natural rosewood re-hydrated with lemon oil We also leveled -dressed -recrowned-polished refined frets .... she plays and sound like a MUCH more expensive guitar now... sure to please for decades to come She’s a beauty and easily in 8.7/10 condition with a few insignificant blemish nicks - scratched we have addressed by lacquer tip color matched touch up and repolished Specifications: Top : Solid Sitka Spruce Back & Sides : Rosewood ... said to possibly be solid woods ... little is difinitivly known of this series just looking it looks to be solid you judge for yourself Neck : Mahogany Fingerboard : Rosewood Bridge : Rosewood Hardware : Chrome Finish : vintage gloss Hand crafted in Japan Vintage very good used condition Sound is really good!!! Contact Joe to buy it at jvguitars@gmail.com .
If you’re looking for a solid start on how you will sound without settling for a tube amplifier due to its price, maintenance and back breaking weight to carry around. The Marshall MG30FX combo amp is surely one of the best out there on capturing iconic sounds, as well as the legendary Marshall tones that other brand of amplifiers frequently emulates, adding it to their bank of amp models.

In this range, you will find many premium options. Many guitars in this range will offer some of the best features available. Again, you will find many upgrades from less-expensive models. Often, these are considered the standard models. Of course, you certainly don’t have to spend $1000 to get a great guitar. However, most guitars of this caliber will satisfy even the most discerning player. Musician’s Friend’s Private Reserve collection includes instruments that cater to the most demanding professional guitarists’ requirements.
{ "name": "Vintage Sunburst", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000004000", "status": "backorderable", "statusText": "Back Order", "pimStatus": "R1", "inventoryText": "Reserve now - Ships 11-05-2018", "inventoryKey": "available_date", "availableDate": "11-05-2018", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000004000", "displaySku": "J40301 000004000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000004000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-12-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Vintage-Sunburst/J40301000004000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Vintage Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }
Be prepared for each practice session. That means, know what you learned in your previous session and whether you're satisfied you accomplished your goal for that session. If you still need time on your previous session's goal, spend another session on it. Don't move on until you have it nailed. So important. If you feel like you're not making progress with a particular technique or concept, I'm always here to help.
Mike Hedges also uses this idea a great deal, and explains how it really comes into its own at the mix. "You've got two or three tracks of guitar: one clean, one medium — say, half-driven — and then one really driven. As the song progresses, you might use the nice clean track during the verse, as you're coming to the bridge you fade in the heavier guitar sound, then back it off a bit, into the chorus with everything full on, then back to the next verse and drop it all out. It's all done on one guitar track, so it doesn't sound like you've done 10 guitar overdubs. It has a different quality, it sounds like a live performance, but you've got real dynamics in the sounds. It's a very effective technique."
"Bring up one mic at a time and get it to optimum level on your board. To check that they're all in phase, make sure the signal is adding and not subtracting as you add in the other mics. If not... reverse the phase. Then start to put up each mic, one at a time... as you move the faders back and forth, you'll hear the greatest EQ, because of the phase relationship... Then if you flip the phase on one of the mics, you can really have some fun — it'll act like a filter."

You can get an entirely new perspective of the fretboard by starting from the C-A-G-E and D chords. This book can help create a roadmap for the guitar, where you'll be able to know each fret's note name - one of the most important things to learn when playing. If you're unsure about learning this system, do a search for the CAGED system on YouTube and see if it's something you'd be interested in.
Thank you Ola and David for this excellent article. The approach is totally scientific: you try to study the impact of one element of a system while keeping the rest of the settings identical (same pickups, same strings, same picking, etc.). The wood used modifies effectively the electrical spectrum composition and therefore the sound we hear. All the difficulty is that the wood is a part of a very complex system (woods combination, building type, pickups, strings, effects, amplification, restitution, etc.) and, without a solid knowledge or skills, it could be difficult to choose the right elements of the system to get what you want…
In the event it does not work out, the next measure is to utilize automotive fine grade sand paper to decontaminate contact points. Once more, cover this around a Q-tip for jack inputs and replicate the contact cleaner procedure. By now, you should have confirmed any likelihood that the problem is caused by a cleanliness issue. All your equipment should be fresh and clean for your upcoming performance.
Before being acquired by Gibson in 1957, Epiphone was one of the most popular guitar brands in the market. It competed with highly renowned guitar brands, including Gibson. These days, Epiphone is known for being a more affordable brand of Gibson guitars. They’re great for playing tunes from the 60s. Epiphone produce cost-effective versions or alternatives of Gibson Guitars. Many musicians claim that Epiphones were their first ever instrument. Epiphones tend to be very popular in the entry level market. Epiphones are great for people who are just starting and want a good brand name for their first guitar. So, if you’re looking for a cost effective entry level guitar, Epiphone would be your best choice.

Taylor 110ce Yes, there’s already one Taylor in the list, but we just can’t resist including the Taylor 110ce dreadnought. It certainly deserves a spot here because of its noteworthy qualities, which include a thin-profile neck, shorter nut width, well-balanced tone and plenty of projection. Plugged in, the guitar produces a natural electro-acoustic sound - just the way we like it.
In addition to guitars, Gibson offers consumer electronics through its subsidiaries Gibson Innovations (Philips brand), TEAC Corporation (TEAC and Esoteric brands), Onkyo Corporation (Onkyo and Pioneer brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems, pianos from their wholly owned subsidiary Baldwin Piano, and music software from Cakewalk. (See section #Instruments)
The Fender Mustang I V2 Guitar Amplifier Combo also features USB connectivity allowing you to hook it up to your computer or DAW software for easy recording. If you don’t already have a DAW, you can utilise the free downloads of Fender FUSE and Ableton Live software suites to create your own music and take advantage of all the great features within the amplifier when recording. An intuitive, easy to use control panel allows you to see and change your sounds and footswitch connectivity (sold separately) ensures you can have complete control without the need for a pedalboard. A fantastic amplifier for beginners and players of all levels.
I'm no musician, know very little about guitars, but I think I stumbled on to a great deal. The predicament we faced last Christmas was that my two nieces, ages just 7 and 5, both fell in love with a toy "music" setup consisting of a plastic "guitar" and a fake microphone. I won't say the famous girl-toy-brand name it was marketed under but it was pretty much a collection of junk. The "guitar" had a few buttons on it to make noise... it would have been broken and tossed away inside of a week. And here in Costa Rica - a price of 34,000 colones or roughly $70!

{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: first act","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"gretsch guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
{"product":{"id":"113884849","stock":"instock","price":"219.99","name":"Thunderbird IV Electric Bass Guitar","download":false,"sku_id":"113884849","checksum":"117352072023","rep_id":"site5113884849","displayId":"113884849","sku_display_id":"113884849","sku_rep_id":"site5113884849","gc_pro":false},"category":"Electric Bass","pageName":"product_detail","subcategory":"4 String Electric Bass","dept":"Bass"}
Other early phase shifters used field effect transistors (FETs) to control each phasing stage in place of the light bulbs in the ’Vibe, and certainly later units employed opamps with variable resistors (six TL072 dual opamps or similar in the MXR Phase 100, for example). Electro-Harmonix’s sweet little Small Stone, on the other hand, has a more unusual design that employs five CA3094 type Operational Transconductance Amplifiers (OTAs). The results are similar, but subtly different. Many phasers—such as MXR’s Phase 45 and Phase 90, and E-H’s Small Stone—carry nothing but a speed control, plus a “Color” switch in the case of the latter. Others have Depth, Mix and Resonance controls. The latter appears on many units with internal feedback loops (the Small Stone and most phasers before it lack this circuitry), and allows the player tweak the degree to which the portion of the signal fed back enhances the frequency peaks.
​​Our primary goal here at Top Custom Guitars is to create unique instruments that match our players' personalities. The bond we've formed over the past 15 years with each of our clients has not only fueled the growth and maturity of our instruments, it's fueled our creative growth as a company. YOUR passion drives OUR passion, and because of the individual relationships we build with our clients. Enjoy our galleries and forums, and if you have any questions, ideas, or dreams to share, we’d love to hear them.

@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.


Where the cabinet is open backed, it's also worth experimenting with miking from the rear, as this produces yet another range of tonal flavours, usually warmer and less bright than miking from the front. It's also quite permissible to mic both the front and rear of the cabinet simultaneously, but experiment with phase inversion on one of the mics to see which setting gives the best subjective sound. Strictly speaking, one of the mics should be inverted with respect to the other, but that doesn't always produce the best result. If you really want to hedge your bets, use an ambience mic several feet from the cabinet and combine this with the close-miked sound, either summed to mono or with the two mics panned left and right. Using a capacitor mic as the distant mic often produces a more believable sense of space, but anything that sounds good goes with guitars.
A Volume pedal is a volume potentiometer that is tilted forward or back by foot. A volume pedal enables a musician to adjust the volume of their instrument while they are performing. Volume pedals can also be used to make the guitar's notes or chords fade in and out. This allows the percussive plucking of the strings to be softened or eliminated entirely, imparting a human-vocal sound. Volume pedals are also widely used with pedal steel guitars in country music. It has also been used to great effect in rock music; the Pat McGee Band's live version of "Can't Miss What You Never Had" on General Admission illustrates what the pedal is capable of. Some volume pedals are:
Choosing an electric guitar that addresses these preferences helps guarantee that new players will stay motivated as they learn to play. Musician’s Friend offers a wide selection of ¾-scale, mini, and travel guitars that are ideal for smaller, younger players. Full-sized electric guitar bodies vary considerably in size and weight, and those factors should be considered.

{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"distortion & overdrive effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}


If anybody needs a Bridge, I have a Teisco Roller Bridge for sale, it is a a copy of a Gretsch Roller bridge but includes a solid steel Base like a Rickenbacker Bridge Base. The string saddles are rollers which are adjustable side-to-side for proper string spacing, and each side of the bridge is adjustable for Height. It is in excellent condition, probably from 1965 thru 1968. On a scale of 0 to 10, it is a 8.
After making your observations about the curve in the neck, make your adjustments of the truss rod, if necessary, until you have the amount of forward curve you are looking for. In the best case scenario this will mean that you end up with a slight forward profile, when fretting the 1st and 12th frets, usually no more than 1/32", focused in the 6th-7th fret area and tapering towards flat in either direction.

A true guitar polymath, Nels Cline has tackled everything from gothic country rock with the Geraldine Fibbers to a full remake of John Coltrane's late improvisational masterwork, Interstellar Space. He's best known, of course, as Wilco's gangly guitar hero, lurching into extended seizures ("Spiders [Kidsmoke]") or spiraling into lyrical jam flights ("Impossible Germany"). "Nels can play anything," Jeff Tweedy said. "We struggle with his spot in the band sometimes – but we always come to a place that's unique and interesting because we did struggle."


George Harrison of the Beatles and Roger McGuinn of the Byrds brought the electric twelve-string to notability in rock and roll. During the Beatles' first trip to the United States, in February 1964, Harrison received a new 360/12 model guitar from the Rickenbacker company, a twelve-string electric made to look onstage like a six-string. He began using the 360 in the studio on Lennon's "You Can't Do That" and other songs. McGuinn began using electric twelve-string guitars to create the jangly, ringing sound of the Byrds. Both Jimmy Page, the guitarist with Led Zeppelin, and Leo Kottke, a solo artist, are well known as twelve-string guitar players.
Their songs cut right to the melodic and rhythmic core of great rock and roll. Johnny contributed song ideas and slashing guitar arrangements, but he also kept the whole thing on the rails. A straight guy in a world of addicts, perverts, weirdoes and psychos, Johnny’s politics were dubious. But, like Mussolini, he made the Ramones’ rock and roll train run on time for more than two decades. John Cummings passed from this life in 2004 after a five-year fight with prostate cancer.
Bass players who do not have a combo amp who are playing live shows can connect their bass to a DI unit and from there to the PA system. In a well-equipped nightclub or music bar, the audio engineer can then route the bass signal to a stage monitor suitable for bass, so the bass player and band can hear the bass tone. Some standalone bass preamplifier pedals have a DI output, so this output can similarly be connected to a PA system. Bass players who are playing in small venues (coffeehouses, small pubs, etc.) will typically need to bring their own bass combo amp (or an alternative amp, such as a keyboard amp combo), because very small venues often have a very small, low-powered PA system which is used mainly for vocals. Some small venues do not have monitor speakers, or they have only one, in front of the lead vocalist. Bass players who do not have a combo amp who are laying down tracks in the recording studio can plug into a DI unit (any professional recording studio will have one), which is connected to the audio console; the audio engineer can provide the bassist with the sound of their instrument through headphones.
Guitar Center Repairs is your go-to spot for expert stringed instrument repairs, upgrades and servicing. Located inside every Guitar Center store, our staff of experienced, certified technicians will keep your guitar or other stringed instrument in peak playing condition and help you get the most out of your investment. We also repair and modify other equipment like effects pedals, amps and more at select locations. Set up an appointment or stop by any Guitar Center today.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=155.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prod361014, MSRPRange=false, enablePDPColorOption=false, showBrandNameWithProduct=true, restockStartAmount=null, priceVisibility=1, listPrice=155.0, salePrice=155.0, isOnSale=false, showMSRP=true, restockCount=0}
16-Series: Style 16 guitars were first introduced in 1961. Later, they were the first production Martins to utilize sustainable, native woods such as ash and walnut, as well as the first to implement hybrid A-frame “X” bracing. Today, these models use solid woods such as mahogany, East Indian rosewood, koa, sapele and maple. Models include DC-16RE Aura, OMC-16E Koa, D-16 GT, 000C-16RGTE Aura and the J12-16GT, a 12-string jumbo-size guitar with the series 16 appointments. Most -16 series instruments use the Martin long scale, 25.4″.
Playing power chords right up at the ‘dusty' end (past the 8th fret) gets difficult, because the frets are so close together. In the next stage we'll learn how to play power chords with a fifth-string root too, which solves that problem. However, it's important not to rush ahead, so make sure you put your effort just into the sixth-string root chords for now.
This guitar is based on Loar's U. S. Pat. 2,020,557 (filed 1934, awarded 1935), in which electric amplification is combined with an acoustic guitar body. The design offered a player the option of switching between electric and acoustic amplification, or combining both, with metal posts through the bridge that transfers vibrations from the strings to the bar-armature. With the posts raised, the bridge comes in contact with the soundboard for exclusively acoustic amplification; with the posts lowered to contact the metal bar-armature, both acoustic and electric amplification is engaged, and with the posts lowered completely, the bridge is lifted off of the soundboard and supported only by the bar-armature for exclusively electric amplification. The back of the guitar, made from arched spruce, with two f-shaped soundholes, incorporates another of Loar's ideas, covered more extensively in U. S. Pat. 2,046,331 (filed in 1934 but awarded in 1936), to use the back of the instrument as a second soundboard by transferring bridge pressure from the top.
You have a huge range of effects at your disposal, which can be applied to both vocals (thanks to the XLR inputs) and line level instruments such as your acoustic guitar. You have 2 compressors, a boost, 3 Chorus types, as well as 3 types of delay and reverb effects to suit a wide range of sonic palettes, all of which have been optimised specifically for acoustic guitar. However, it’s the Acoustic Resonance selectors, 80 second phrase looper and anti-feedback feature that the acoustic guitarists will really take advantage of.

At GuitarBassPro.com. ("GuitarBassPro"), we are committed to protecting the privacy of our customers and users of our web site located at www.GuitarBassPro.com (the "Site") . This privacy policy ("Privacy Policy") gives you details of our privacy practices, including (a) what information we collect about you when you use the Site; (b) how the information will be used or disclosed; and (c) your rights with respect to our collection and use of your data. We may modify these policies from time to time and will provide notice of any major changes by posting such notice on the Site.
i bought one in 1966, my first guitar, i paid 38.99 for it at a gibson dept. store in ft. worth, tx. it was mij under the same name and was marketed in canada as regent guitars and in the u.s. later as kent guitars. it is in the same catagory (some say better) as teisco its competator, some say there was some interfacing between the 2 companies. i really enjoyed it and wish i still had it, it played great and sounded great. i found this while surfing 4 another!!!
Yes, but not by a guitar center tech who realistically knows fuck all about anything he is adjusting. Find a luthier out independent repair person in your area. Even if it's an hour drive, the difference in the setup will be well worth it. You will also have established a relationship with someone who will know the right way to fix it if and when something breaks.
The bass guitar has a long neck (scale-length) and thick strings. The open strings of the bass guitar corresponds to the four lowest strings of the guitar and are pitched an octave lower. The standard bass has four strings though five and six string basses are available which extends the range of the instrument. Though the bass guitar is the bass instrument of the guitar family and the double-bass is the bass instrument of the orchestral string family their similar roles have drawn bass players to both instruments.
ACTION DEL BRACCIO È possibile regolare l'action del braccio del tremolo utilizzando una chiave a brugola da 3,0 mm sulla vite (B) del tremolo. ACCORDATURA DI PRECISIONE Dopo aver fissato il bloccacorde, utilizzare gli accordatori di precisione per eseguire le regolazioni di precisione dell'accordatura di ogni corda. Regolare tutti gli accordatori (C) al centro della rispettiva corsa prima di fissare il bloccacorde.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
3. Peavey Vypyr VIP 2 40-watt 1x12 ($199): This amp is an all-in-one powerhouse, equally capable of handling electric guitar, bass and acoustic all in one amp. Not only is it capable of effects modeling, it can also handle instrument modeling, giving the player access to acoustic, violin, bass and many other stringed instruments. As far as effects go, it boasts more than 25 effects with controllable parameters and with over 40 watts of power, it’s even ideal for rehearsal.
Speakers and speaker stacks are a necessary partner for standalone amplifier heads. Take the total power level into account when you're looking at speakers, ensuring you're getting a stack with the muscle you need for the venues you play. Speaker configuration is also important, with larger woofers delivering more powerful bass and smaller tweeters bringing through the high-end.
Years of hard-earned success and fame have not changed his down-to-earth attitude. Even though he has become one of the world’s richest rock stars, he hasn’t married a supermodel or become a pompous art collector. Instead, he’s remained true to his working-class roots, spending his spare time building incredibly cool kustom cars and cruising the streets with his car club buddies, the Beatniks of Koolsville.
Equalizer or EQ pedals have traditionally been used to boost audio signals for solos. If you want to boost the middle frequencies, the EQ will do the trick and provide a tight tone. Some musicians don’t find boosters and EQ pedals to be necessary in a chain, so make sure you do some research to figure out if this type will really benefit your sound

During the first three decades of the 20th century, with the rising popularity of Hawaiian and big band music in America, guitar makers built larger-bodied instruments, using steel instead of gut strings, and metal instead of wood for the guitar body. Around 1925, John Dopyera designed a guitar with metal resonating cones built into the top that amplified the instrument’s sound. That suited twangy Hawaiian and blues music but not other genres. Then, in the 1920s, innovations in microphones and speakers, radio broadcasting, and the infant recording industry made electronic amplification for guitars possible. The volume was suddenly able to go up: way up.
After lowering the bridge (usually in a failed attempt at getting lower string action), the owner will eventually realize this is not the best solution. When this happens and a neck reset is preformed, the original bridge will now be *useless* (because it is too low!) The repair guy won't reset the neck to a low bridge, so a new replacement bridge will be installed. At this point the originality of the instrument is compromised.
By far the most common way to sort out this tablature selection is by artist. Some best-selling highlights include the Hal Leonard Jimi Hendrix Complete Guitar Tab Library, Alfred Led Zeppelin Box Set I-V Guitar Tab Platinum Edition and Hal Leonard Eric Clapton Complete Clapton Guitar Tab Songbook. And those are just a few examples from a library packed with hundreds of books. No matter what sort of music you want to play, there's tablature ready to teach it to you.
YP - The Real Yellow PagesSM - helps you find the right local businesses to meet your specific needs. Search results are sorted by a combination of factors to give you a set of choices in response to your search criteria. These factors are similar to those you might use to determine which business to select from a local Yellow Pages directory, including proximity to where you are searching, expertise in the specific services or products you need, and comprehensive business information to help evaluate a business's suitability for you. “Preferred” listings, or those with featured website buttons, indicate YP advertisers who directly provide information about their businesses to help consumers make more informed buying decisions. YP advertisers receive higher placement in the default ordering of search results and may appear in sponsored listings on the top, side, or bottom of the search results page.
Now, the body size isn’t the only thing to think about. There’s also whether or not there’s a cutaway, and how this is implemented. A cutaway makes it easier for you to access the higher frets, because you can place your hand right next to them. Naturally this will reduce some of the resonance because there’s less body beside the neck, but it’s a tradeoff that a great many guitarists are happy to make if they want to be able to play those higher frets well.
Because there is no inherent right or wrong amp, the suitability of the end gadget will depend on your personal taste and the tuning of the ear. Quality guitar amplifiers are designed to precisely reproduce sound while maintaining a clean and accurate tone. You can find acoustic and electric guitar amplifiers from brands like Fender, Peavey, and Blackstar.
Amp modeling is a polarizing topic for some guitarists, but it shouldn't be because the alternative is still widely available. If f you feel that amp modeling will just be a distraction then go for a straightforward amplifier. For those who do appreciate the versatility that they offer, there are now many options on the market, from the usual digital recreations of popular amps, to those with analog based amp voicing approximations.

This is an American Fender Telecaster electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jangly indie sounds or clean country sounds but can be very rocky with more distortion added. This guitar is also a classic that has been used in alot of types of music.


Enter the polyesters and the polyurethanes. These plastics can be made into synthetic resins which harden after application the guitar body, making them more durable than nitrocellulose finishes. In some cases, UV light can be used to initiate the curing process of the resin, making the finishing process much quicker than the application of nitrocellulose lacquer.
It’s important to remember that these setups are not set rules that must be followed.  You can get a variety of unique sounds by placing your effects in unorthodox locations.  It’s common to run into that special sound that came about as a ‘happy accident’ when setting up your effects.  Using these suggestions, you can build up your own pedalboard to suit your individual taste.
You are sure to find a Gibson in any guitar brand comparison list that you come across. This guitar manufacturer is the oldest producer of solid-body electric guitars. The first guitar was manufactured by Les Paul himself, and the company's signature model is, in fact, also a Les Paul model. It was the first company to introduce the double coil pick ups or the legendary 'humbucker' for rock music. The guitars by Gibson made rock and roll possible. Like Fender, Gibson is also a universally popular guitar brand whose guitars are known for their high treble and melodious tones. The company also has a bass series. It has remained consistent as far as styles and designs are concerned. Other famous electric guitars from Gibson include the SG, Flying V, Explorer, ES-335, and Firebird, and classic acoustics include models like the Hummingbird.
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.

{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}


1. Examples. There are a handful of examples in this book and that's about it. I expected much more in the way of alternate wiring examples but they were only mentioned in passing it seems. Additionally if you're looking for good step by step instructions you wont find it here. The instructions are average at best and never really go deeper than "put this wire here and that wire there" . It's step by step,but just barely. Don't expect any deep explanations on the theory behind why certain wirings do what they do or why they sound the way they do. It's cursory at best.

Get superior guitar tone and flexibility using this 15-Watt, 1x12 Guitar Combo Tube Amplifier with Celestion Speaker & Spring Reverb from Monoprice! As the title indicates, this guitar amplifier features a 15-watt tube power amplifier and a Celestion brand speaker. It uses three ECC83/12AX7 preamplification tubes and two EL84 power tubes for the amplifier section, plus a Celestion Red Truvox 1215 speaker. The EL84 tube is the tube that powered the Mullard amplifiers favored by the British Invasion bands of the 1960s.
Mid-to high-priced amps may have other switches (which on some amps are switched on by pulling an existing rotary knob out) that boost or cut some part of the frequency range, such as "bright boost", "deep boost" or "mid scoop" switches. Amps with an onboard audio compressor or limiter, which is used to protect the speakers from sudden peaks in volume and from damage due to power amplifier clipping, may have only an on/off switch to turn on the effect (as with lower- to mid-priced amps), or they may have one or more knobs to control how much compression is applied to the bass tone (typically a ratio and threshold knob or just a single knob). Some 2000s-era amps may have an electronic tuner and a mute button, to mute the sound of tuning during a break between songs without having to change the volume settings. On some amps, vertical sliders may be provided to control a graphic equalizer, which gives the bassist control over a number of frequency bands.
Strumming Patterns: Rhythmic strumming patterns are rarely coupled with delay.Chords: In some cases, swelling chords that are strummed once can work well with a delay effect, but generally this is avoided in favor of a less-saturating effect, perhaps a kind of light modulation.Short Arpeggios: A five to 10 note arpeggio is the perfect spot to dial in a smooth delay to help fill in the sound.Quick Solos: Speedier solos can work with delay and make sense, but the faster you’re playing, the harder it is to get delay to sound clean and not muddy.
Roger Fritz is a professional luthier who makes guitars and basses for musicians like George Harrison and Randy Jackson. Roger is also a bass player who fell in love with the old Kay 1950's bass after having a friend recommend he play one. Roger, who had worked for Gibson in Nashville on their Bluegrass instruments, created his own company, Fritz Brothers Guitars in Alabama is making custom hand-made instruments for professional players worldwide. Roger was so enamored with the sound of the Kay (K162V) Pro Bass that he developed a clone and made them available for sale under the Fritz name. Roger Fritz was the missing link that was needed to make the project a reality: a Luthier that had a love for the instruments to be produced. Roger joined our team in early 2007 to help create and develop all the parts and features that made the Kay products different from all the rest. Most of the parts and molds were no longer available so everything had to be created from scratch. The pickguards, the knobs, the hand wound pickups, the tailpiece, and even the baseball bat style toggle switch cover all had to be manufactured using original parts as templates for the new reissued versions. Finding the parts was difficult and surprisingly expensive since we needed to search stores, eBay and contact collectors to find perfect originals to reproduce. The going price for a good vintage Jazz Special Bass today is $7,000. But after finding the parts and vintage instruments from avid collectors like Gary Walko, Vintage Kay historians like Michael Wright and Jay Scott, and dozens of avid fans, the project was able to take form.

The Teisco brand name stands for 'Tokyo Electric Instrument and Sound Company'. Teisco was founded in 1946 by renowned Hawaiian and Spanish guitarist Atswo Kaneko, and electrical engineer Doryu Matsuda. Teisco guitars sold in the United States were badged "Teisco Del Rey" beginning in 1964. Teisco guitars were also imported in the U.S. under several brand names including Silvertone, Jedson, Kent, Kingston, Kimberly, Tulio, Heit Deluxe and World Teisco. While guitars manufactured by Teisco were ubiquitous in their day, they are now very collectable."
The three Teisco amps included the Teisco-88, the AMP-71R and the Miny. No details are available on these, but they were fairly rectangular cabinets with top-mounted controls. The Teisco-88 had “Teisco” and a big “88” on the grillcloth. The ’66 model was a tube amp, so this likely was, as well. I suspect the others shown were tubers as well. The Miny had the italicized T logo on the front. The AMP-71R had reverb.
[Attention Korg Pa3x /Pa4x owners and Korg Pa700/1000 owners- I have a special version of this 6-velocity layer piano in .set format that will load to your Korg in compressed format at 116mb (equivalent to 232mb) - This set sounds wonderful on the Korg and uses 22 oscillators for outstanding realism including resonance, key-off and pedal effects. Send me an email (see bottom right) and I can provide a download link or go to the demo on SoundCloud here Korg Pa Yamaha C5 and follow the download link]

Run a length of wire (approx two feet is usually plenty) through the jack mounting hole and down into the cavity. When you see the wire in the cavity pull it up through the F hole. Make sure the wire is long enough for one end to stick out the jack hole, and the other to stick out the F hole. Tape the jack hole end of the wire to the guitar with masking tape, or tie it to the strap button. This will ensure it doesn’t fall through the jack hole while you’re working on the other end.

Bull necked and heavily tattooed, Mike Ness is not the kind of guy you’d want to mess with. The Southern California guitarist, singer and songwriter has known good times and bad, punching his way out of a serious drug addiction in the mid Eighties. He has funneled these experiences into some of the most hard-hitting, plain-dealing rock songs to come out of the SoCal punk milieu. Ness launched Social Distortion in 1978.
Guitar chords are dramatically simplified by the class of alternative tunings called regular tunings. In each regular tuning, the musical intervals are the same for each pair of consecutive strings. Regular tunings include major-thirds (M3), all-fourths, augmented-fourths, and all-fifths tunings. For each regular tuning, chord patterns may be diagonally shifted down the fretboard, a property that simplifies beginners' learning of chords and that simplifies advanced players' improvisation.[70][71][72] The diagonal shifting of a C major chord in M3 tuning appears in a diagram.
Mastering guitars isn’t a piece of cake, mainly if you are a greenhorn. You get lost in the labyrinth of types of guitars, each having different size, shapes, and price values. Most of these especially hunt your wallet, burdening down your pockets with hefty price tags. As an amateur, you find no other option but to pay the said amount hoping to get something useful. Indeed, the best electric guitar brands are usually inclined towards the more pricey side. If you have background knowledge about the best brands, who knows you may get your desired guitar in an affordable range. Through this article, you will learn what different types of guitar brands are available in the market.
Follow your musical vision and express yourself with the unique Fender Newporter Player. The exclusive medium-sized Newporter shape gives it a balanced voice that's both articulate and powerful, perfect for backing up any singer. Designed for performing, the fully-painted gloss metallic solid spruce top, mahogany back and sides, matching painted 6-in-line headstock and creme binding give this guitar a shot of electrifying style. Unconventional to the core, the Newporter Player is definitely something different and exciting.
Typically, guitar amplifiers have two amplifying circuit stages and in addition frequently have tone-shaping electric circuits, which usually include at least bass and treble controls, which function similarly to the equivalent controls on a home hi-fi system. More expensive amplifiers typically have more controls for other frequency ranges, such as one or two "midrange" controls and a "presence" control for high frequencies. Some guitar amplifiers have a graphic equalizer, which uses vertical faders to control multiple frequency bands. Some more expensive bass amps have a parametric equalizer, which enables precise control of tone.
Description: Body: Koa - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Rosewood - Binding: White Sparkle - Frets: 22, Jumbo, Medium - Inlay: Thumbnail - # of Strings: 6 - Scale Length: 24.6" (62.5cm) - Headstock: 3+3 - Bridge: Rocking Bar - Bridge Construction: Ebony - Cutaway: Single - Hardware: Grover Romantics Tuners, 3x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: FilterTron - Pickup Configuration: H-H - String Instrument Finish: Flamed Koa
It’s 1951, a dark, rainy night on the backstreets of Memphis, Tennessee. Ike Turner and His Kings Of Rhythm are packing the gear into the station wagon, getting ready to head off to the studio to record a track for producer Sam Phillips, a track that the Rock and Roll Hall Of Fame will one day honor as the first rock and roll song of all time, ‘Rocket 88.’ (Although, distinctly unfairly, the song will be credited to singer Jackie Brenston and the imaginary band ‘His Delta Cats.’) “The amp—a Fender Bassman—was in the trunk of the car and it fell out, right on the road,” Ike Turner told Guitar Magazine’s Rick Batey in 1998, “and it was raining, so the amp got wet. When we got to the studio and plugged it in one of the tubes went ‘pop.’ We didn’t have no more tubes—so that’s where the fuzz came from.’
Two ways. The most important is: practice. But the other way is technique. Proper fingering. Some chords have multiple ways they can be fingered, and you always want to pick the easiest. Now, some fingerings may not *seem* the easiest, just because they aren't the ones you already know, but in the long run, they are worth learning because they really do make things easier. In particular, most people play an open A chord the wrong way, but the proper fingering makes it easier.. The essense of fingering is laziness: you want to move your hand and fingers as little as possible. So in particular, if you have a finger down in one chord that's already in the right place for the next chord, you want to just *leave* it there. Don't pick it up, only to place it back down in the same place. And if you can use a fingering that *let's* you just leave it there, then that's clearly the choice!. So let's look at the open A chord. Most people play it with their 1st finger on the 4th string, 2nd finger on the 3rd string, and 3rd finger on the 2nd string, three-in-a-row. But that's a weak fingering (however popular it is). The better fingering is like this: 1st finger on the *3rd* string, 2nd finger on the 4th string, 3rd finger on the 2nd string. It may *look* a little awkward, and feel awkward until you learn it. But it really is the better fingering.. Why? Because consider the context of an A chord. What chords are you most likely to want to go to from an A? The biggest answer would probably be D. Well, notice, if you finger the A chord as I recommend, your first finger is now already in the right place for the D chord, and can just be left there! You only have to move two fingers, instead of all three, to switch between the two. This lets you do it faster and smoother. The other chord you'd be likely to want to go to from an A would be an E, and, while we don't have any fingers exactly in the right place, we at least already have the 1st finger on the 3rd string, like we want it for an E; we just have to slide it back one fret. This is still easier than entirely re-arranging all three fingers. Finally, more rarely, you might want to go between A and Amaj7. For instance, the old Beatles song "Mother Nature's Son" uses the sequence A Amaj7 A7. This is perfect for this fingering! You just slide your first finger back one fret to make the Amaj7, then take it off entirely to do the A7.. Similarly, a G chord normally be fingered using your 2nd, 3rd, and 4th fingers, instead of your 1st, 2nd, and 3rd. This makes it much easier to go to C, the most likely chord for you to be going to.. But no fingering rule is absolute, it's always contextual. If you have a song which requires you to move to something more unusual, and a different fingering would make that particular move easier, then use the different fingering. For instance, if I had something which required that I add an A note to the top of my G chord, then I might well use the common 1-2-3 fingering for the G chord, so that I'd leave my pinkie free to reach the A note.
Rackmounts are most commonly used in recording studios and "front of house" live sound mixing situations, though professional musicians who play electric bass, electric guitar, or synthesizers may use them in place of stompboxes, to create a rackmounted head unit for their speaker cabinet(s). Rackmounts are controlled by knobs, switches or buttons on their front panel, and often by a MIDI digital control interface. During live performances, a musician can operate rackmounted effects using a "foot controller".[14] By setting up effects in a rack-mounted road case, this speeds up set-up and tear-down, because all of the effects can be connected together with patch cords (which can be left connected permanently) and all of the units can be plugged into a power bar. This means that a musician only needs to plug in the main power bar into AC Mains power and plug their instrument into the rack, and the last effect unit's output into their instrument amplifier and/or the PA system.

RACING STRIPES Once you have checked out the color coat and are satisfied with the results and have let it dry completely, you can move straight to clear coats or add some racing stripes... or any other design you feel comfortable painting on. I did a paint splatter on the guitar I'm currently working on and it looks awsome. Plus it was realy easy. I just sparyed some black laquer paint in a pan, dipped a brush in it and splattered it on to my liking. For racing stripes make sure you get auto masking tape so you don't get any bleed through when you paint. Decide where you want you lines to go and tape them off. Use a garbage bag to cover the rest of the guitar and make sure all the other areas of the body are covered and taped off to prevent any unwanted spray from getting on the guitar. Spray just enough coats of paint to cover up the base color. You don't want it to be too thick because you will lay daown a clear coat on top and wet sand to level out the finish. If it is too thick it will take much more coats of clear and more sanding than you will want to do just to level it out.


With that in mind, the quality of said effect is satisfactory, to say the least. You maybe won’t see the same level of refinement as you would in some stand-alone models, however its reverb comes across as fairly organic. On top of that, you are presented with several decent options. All of that aside, the real value of this Zoom comes from its ability to combine up to 6 effects at any given time.
Bill Collings dropped out of medical school in the early 1970s[3] and instead worked in a machine shop for five years.[4] At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.
At the beginning of the Teisco saga, Teisco instruments were primarily built for domestic consumption in Japan. The early guitars were fairly high quality by contemporary Japanese standards. As the ’60s dawned, Teisco increasingly got caught up in the export market, and by the mid-’60s were major players in the low-end or beginner arena, with instruments sold primarily by mass merchandisers such as Sears and at discount department stores which were rapidly developing at the time. It was mainly in this latter niche that Teisco guitars are known in the U.S. In order to give this narrative some structure, I’ve divided the Teisco history into four basic periods: I-Gibsonia; II-Frumpy Fender-ama; III-A New Spectrum of Originality; and IV-Copydelia.
I know a lot of you out there fancy yourself as “tinkerers”, and many of you may actually be quite good at handling repair work to your own instruments, but I’ve always been more of the kind who loves to find a good repair person. Number one, if the repairer doesn’t do the right job, or there are problems with the work they did, they have to own up to it, and make sure it’s done right until you are fully satisfied. Then of course, if they are actually a selected and accredited repair person for a given guitar company, it’s even better to bring them the guitar, rather than trying to take matters into your own hands.
Jimmie Vaughan: based on Jimmie’s own ’57 Stratocaster, the Jimmie Vaughan Tex-Mex Strat reflects his deep roots, traditional style, and preferred Strat features. Noteable for it’s alder body, 3 Fender Tex-Mex single-coil pickups, an extra-hot bridge pickup, a special tinted maple 1957-type V-shaped neck with maple fretboard and medium-jumbo frets, vintage machine heads, original Fender synchronized tremolo, and custom tone control wiring. Tone, tone and more tone.
A combination of standard 7-string tuning and an 8th string dropped one full step. Allows to play in the range of a standard electric bass, as well as power chords. Used by Animals as Leaders[47] and Whitechapel (on the songs "Devolver" and "Breeding Violence" from A New Era of Corruption). Also used by Deftones on Koi No Yokan and Gore, Allegaeon, and Emmure on the song "N.I.A. (News in Arizona)". A variation of this tuining is used by Hacktivist with 3rd and 4th strings tuned a whole step up to A and E respectively.
Epiphone was once among the most significant competitors of Gibson. Later on, Gibson acquired them and, now, Epiphone form sits budget-friendly. However, the popularity of Epiphone as one of the best electric guitar brands was always there owing to their affordability and near to top-notch quality. Thus, choosing an Epiphone Les Paul guitar doesn’t mean you have to compromise much on the tone and specs. In fact, you get a guitar with specs comparable to Gibson – that too – on a much cheaper rate.
This guitar could have rocked around the clock. Bill Haley and many other early rockers used guitars just like this baby. They have a sound of their own, and just breath taking, to say the least. This Harmony H38 dates to about 1957-59. She's completely original except for the button input jack that someone installed. This guitar puts a chill in cool. There's just something about playing a Vintage Harmony. $799.99
At this point you should have the pots, switch, and jack out of the guitar with the pickup wires still connected. You can either de-solder the pickup wires or use wire cutters to clip them off. If you’re replacing the pickups as part of your re-wiring, you can do this now (I did not in the example photographed here). Just feed the leads of the new pickups back through the holes in the pickup cavities.
Martin is a famous America-based company known for is a variety of impressive electric and acoustic guitars. Their guitars are predominantly manufactured in Pennsylvania and Nazareth. The history of Martin guitars dates back to 1833. From then on, Martin has managed to maintain classiness and quality in their guitars to satiate the thirst of pro players in America.
A bass amplifier or "bass amp" is a musical instrument electronic device that uses electrical power to make lower-pitched instruments such as the bass guitar or double bass loud enough to be heard by the performers and audience. Bass amps typically consist of a preamplifier, tone controls, a power amplifier and one or more loudspeakers ("drivers") in a cabinet. While bass amps share many features with the guitar amplifiers used for electric guitar, such as providing an amplifier with tone and volume controls and a carrying handle, they are distinct from other types of amplification systems, due to the particular challenges associated with low-frequency sound reproduction. This distinction affects the design of the loudspeakers, the size and design of the speaker cabinet and the design of the preamplifier and amplifier. Speaker cabinets for bass amps usually incorporate larger loudspeakers (e.g., 15" speakers are more common for bass than for electric guitar amps) or more speakers and larger cabinet sizes than those used for the amplification of other instruments. The loudspeakers themselves must also be sturdier to handle the higher power levels and they must be capable of reproducing very low pitches at high sound pressure levels.
Beginners, take note! We’ve changed a few things in this article of beginner-friendly electric guitars, which included removing a few older models such as Squier’s Vintage Modified ’51 and the ESP LTD M100FM. We then added some new and popular models, such as the stripped-down Squier Affinity Jazzmaster HH, the super-cool Dean Vendetta XM, and the compact Jackson JS1X Dinky Minion. Also expanded the guide part of this article.
I'm not sure if the same applies to LPs, but on my BC Rich Mockingbird (which has the same tone/volume setup) if one volume knob is all the way off it'll only mute the guitar in the center position. Say the bridge volume is at 10 and the neck is at 0, I'll still get sound if the bridge pickup is selected but I won't get sound if both or just the neck are selected.
Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.
The traditional Firebird style pickguard is layered white and black and has Slash's "Skull & Top Hat" log in red. The Mahogany neck is glued to the body with a deep-set neck tenon and has a standard 24.75" scale and a rounded custom "Slash" profile. The Pau Ferro fingerboard has single-ply cream binding with Pearl trapezoid inlays, a nylon nut, and 22 medium jumbo frets along with a 2-way adjustable truss rod. The back of the Firebird's traditional reverse headstock has Slash's Snakepit logo in gold.
Perry has also endorsed an affordable replica version of the Boneyard guitar made by Epiphone that carries the same USA made Burstbucker pickups as the Gibson model. It is a customized Gibson B.B. King “Lucille” guitar; however, instead of the black finish and “Lucille” signature on the headstock, Perry’s guitar features a white finish, a “Billie Perry” signature on headstock and an image of Billie Perry on the front of the guitar.
I personally could not play any of my songs as they currently stand on Amber and that influences my review a lot.  And while I like pushing away from open chords, power chords, and standard major/minor barre chords, I think a strumming/chord focused VSTs should be able to play a Cadd9/A with a capo on the second fret. That’s not even a complex or difficult chord to play (Guitar tab = 5x055).
We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
Schooled in flamenco and jazz, Robby Krieger pushed beyond rock at a time when most players were still bound to the blues. In the Doors, he had the improvisatory flair to follow Jim Morrison's wildest journeys, wrote some of their biggest hits ("Light My Fire"), and picked up the slack in their keyboard-drums-guitar lineup. "Not having a bass player… made me play more bass notes to fill out the bottom," he said. "Not having a rhythm player also made me play differently, to fill out the sound. I always felt like three players simultaneously."
Guitar -> G-Lab True Bypass Wah Pad -> Keeley Mod Vox Wah -> INTO GIG RIG (and send to Strobostomp tuner) -> Keeley Compressor -> Ibanez Tube Screamer -> MXR Phase 90 -> MXR Distortion+ -> Zen Drive -> TO AMP FRONT INPUT (red cable) -> FROM AMP SEND (purple cable) -> Uni-Vibe -> Tape Delay -> EH Deluxe Memory Man -> G-Lab Dual Reverb -> TO AMP RETURN (blue cable).
If you’re paying attention, you probably noticed that I forgot to mention EQ and volume pedals. Actually I didn’t. Placement of these particular pedals depends more on what you want to achieve with them than any hard and fast rules. For example, you may want to place a volume pedal at the very front of the signal chain to perform dramatic fade in and fade out effects or to better regulate the guitar’s level before it hits any effects (or you could just do what I do and use the guitar’s own volume control). Placing the volume pedal near the end of the signal chain just before the delay and reverb effects allows you to perform professional-sounding fades or mute the guitar’s signal without cutting delay or reverb tails short. If you use a loop switcher, a volume pedal can be paired with a single effect, and you can use the volume pedal to blend or mix that effect independently.
In the years following Electric Mud and Muddy's Death in 1983 from heart failure , the record itself started building a cult around it, comprised of acid rock fans, record collectors and curious people. By 1996, the resurgence of popularity in the record matched with its scarcity led it to being reissued in a deluxe edition by Chess with new line notes by Mark Humphrey and Marshall Chess. Despite all the bad press Electric Mud received, Marshall Chess never stopped claiming it was a brilliant, misunderstood record.
Never buy a guitar for its looks alone. You must buy a guitar only once you have started learning and know your fingerstyle and the genre of songs you will be playing. Most of the guitars last for more than a decade. This is the reason, you must keep all these tips in mind before buying a guitar. Look for the style of your playing before you buy a guitar. A few guitars have a thicker neck which may or may not be comfortable to you. In each brand of guitars, different layouts and designs are available. Look for the series and the design that provide you comfort while playing the guitar.
• Sound Judgment: Consider the sonic characteristics of the various materials used in making electric strings. Stainless steel strings are the least glamorous, but offer plenty of bright bite and sustain. Pure nickel has a warm old-school sound, for vintage tones. And nickel-plated steel is a bit brighter than classic nickel and responds more adroitly to picking attack. Chrome guitar strings are typically the province of jazz players or blues artists who are looking for the kind of warm retro tones chiseled into history by the likes of Charlie Christian or swinging Gibson ES-250, ES-5 and ES-335 bluesman Aaron “T-Bone” Walker. And then there are coated strings – the most expensive and theoretically the longest lasting. They are, however, not really the best, sonically speaking. Coated strings tend to have less sustain. Also, their Teflon exterior surfaces are slippery, which might take some getting used to for particularly aggressive electric guitar players. And when the coatings wear off, they rust like any other string.
If you know how to play an E major chord, then you know how to play an A minor chord—just move the chord whole shape over a string. Make sure your first finger is curled, so the open first string rings clearly. Avoid playing the open sixth string when strumming the A minor chord. There are situations when it makes sense to reverse your second and third fingers when playing the A minor chord.
But for all its light weight, this classical guitar shows off a stunning cedar top and rosewood fretboard. The inlay is just as elegant, and to keep the guitar’s profile looking good, the neck has a 3-ply construction style to prevent warping. The guitar has a matte finish, which gives it an “old-school” appearance, and the matte finish is great for photo sessions: no glare.

Guitar effects and the boxes that generate them have married theory and practice, history and material, content and form. Such strange logics, inherent to all of these simple devices, radiate sincerity in their transgressive sounds. Or put differently, those “unmistakable sounds,” which can enchant an entire generation, are not entirely intentional, but are born from the accidental collisions between transistors, tubes, wiring, and luck.
The Boss ME-80 has two modes of operations. MEMORY mode lets you scroll through banks and presets more like a conventional multi-fx unit, and MANUAL mode is what we described earlier, where you can use this pedal as if you had a bunch of effects on a pedalboard and just start tweaking away. MANUAL mode is really where this unit shines, and makes it stand out from other multi-effect pedals. The presets are okay for getting a taste of it, but as is typical of presets many are over the top.
It is famed as the producer of some of the intriguing piece of guitar around like arch top ones, the SG series, Flying V, ES175, Firebird and more. In fact, the ES 175 was the first popular electric guitar around the world at the time. Another peculiar offering under them is the Les Paul Melody Maker, which has been the go-to option for many around the globe.
The desire for innovative sounds has intrigued musicians in every culture since the dawn of time. Oscillating the volume of a note is an ancient technique — we’ve been able to do it with our voices as long as we’ve been capable of singing. Any musician playing a stringed instrument can create tremolo effect — they simply move the bow or finger back and forth while sustaining a note, as violinists and cellists do. But what about other sounds? How has the addition of mechanical and digital devices changed our music?

Fender was started by Leo Fender in 1946 in Fullerton, CA. Leo Fender sold his company to CBS in 1965. In 1985 Fender employees purchased the company. Leo Fender founded Music Man in 1975, and later founded the G&L Musical Instruments company. Fender brands currently include brands include Fender®, Squier®, Guild®, Gretsch®, Jackson®, Charvel®, EVH®, Tacoma…

The chord below (an Am) is going to be used for demonstration. Firstly, you'll notice the name of the chord labeled up the top. Next you'll see a "grid" below it. This grid represents your guitar fretboard. The 6 lines running downwards represent the six strings on your guitar with the fattest and lowest sounding string on the left hand side. The horizontal lines represent the frets on your guitar neck. The top line is the top of the neck.
There have been a series of the Boss RV pedals, some of which have included delay as part of the package. The RV-6 doesn't brand as a reverb/delay pedal, but it does have a "+Delay" mode that incorporates it into the reverb's decay trail. While it doesn't quite meet the same decorated feature list as the HOF (no true bypass, no analog signal, less modes) the RV-6 does add an expression pedal option, which gives you some added flexibility that might be more helpful in performance situations.
I have a Fender Chinese made Telecaster from the Modern Player Series. The finish is spectacular, and while it sometimes feels like they just used a lot of gloss to cover it, it plays and sounds well. I have played it through many amps and it does the job of both a Telecaster and a Strat style. With a humbucking pickup, a lipstick and a strat pickup, this is a satisfying guitar and moddable for people looking for something they can work on without fear of screwing up and wasting a thousand dollars.
Nickelback singer/guitarist Chad Kroeger collaborated with Gibson to create a signature Les Paul. The guitar, called the Blackwater Les Paul, features a mahogany body and neck, a Trans Black finish on a AAA flamed maple top, Gibson 490R/498T pickups, a GraphTech Ghost piezo bridge, Grover kidney tuners, acrylic trapezoid inlays, and painted white stars corresponding with the fingerboard inlays.[46]
Compressors also have the ability to increase the sustain of notes beyond sounds that are normally usable on the instrument; yet another reason the effect is a popular tool in the soloist’s arsenal. The tiniest signal can be normalized to the same amplitude of a fierce pick attack, and a trailing note will resonate at the exact same volume until the string stops inducing a signal on the pickup.

11. Yamaha THR10 ($299): Another compact yet mighty combo amp, the THR10 boasts a mid-century-modern design with a variety of onboard effects and amp emulation options. This amp uses Virtual Circuitry Modeling (TCM) technology, which creates realistic and pristine tone. When plugging in your bass or acoustic guitars, you can even bypass the modeling section. One of the most convenient functions is the ability for the amp to run on a supplied AC adaptor or battery power for ultimate portability in your individual practice scenario. And it even includes Steinberg’s Cubase AI recording software so it’s plug-and-play right out the box!
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: teisco","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"teisco","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
Adherence to the Past While acknowledging the impossibility of scientifically proving tone, many guitar players will still argue vehemently for a classic Les Paul crunch, or they’ll get ready to throw down if you claim solid-state amps sound better than valve amplifiers. They will concede the point intellectually, but on a more deeply rooted, emotional level, they can’t get beyond their own perspectives. It’s almost like observing fire-walkers at the circus. Your brain may understand how the technique works and how it can be safe. But your heart and nerves won’t let you take the chance of barbecuing your feet.
As a result of requests by audio engineers to reduce onstage volume, in the 2010s, in many large venues. much of the on-stage sound reaching the musicians now comes from the monitor speakers or in-ear monitors, not from the instrument amplifiers. Stacks of huge speaker cabinets and amplifiers are still used in concerts in some genres of music, especially heavy metal, but they tend to be used more for the visual effect than for sound reproduction.
Your guitar is a model H1213 Archtone made in 1963. Harmony did a great job of stamping model numbers and dates of manufacture on their guitars, but they often require some decoding. The F-63-HB is the date code and the two numbers, not surprisingly, indicate 1963. The “F” preceding the year was often thought to be a fall production indicator while the other letter stamp they would use was an “S,” which researchers thought stood for a spring production instrument. However, a former Harmony employee notified a Harmony database website that it is more likely an “F” stands for “first” and “S” stands for “second.” He explained that Harmony would shut the factory down for two weeks in July and that guitars produced before this break were stamped “F,” while guitars produced after were stamped “S.” The H1213 is the model number as indicated in Harmony’s catalogs and literature. The “3714” is the serial number of your guitar, but little information has been uncovered as to what this series of numbers represents. More than likely, it was a consecutive production number of that particular model for either the first or second half of the year.
@Carl – Sorry to hear that you are having trouble. I am not clear on why this would be happening from the info you have provided. Can you please shoot us an email with details on the input and output connections and how each pedal is being powered when you experience this problem? Also, please also include a video that clearly shows this behavior, your connections, and how each pedal is being powered so that we have a better understanding of what you are experiencing. support@strymon.net
{"pageName":"[gc] pdp: gandl legacy solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114488369;;;;evar65=Used-Guitars-G&L","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
In 2009, Vox refined the Virage design with the Virage II series of guitars. This series repeated the double and single cutaway bodies of the earlier Virage series, but also included the Series 77 (with double horns emulating the Gibson SG series), the Series 55 (with resemblance to the Gibson Les Paul single cutaway), and the Series 33 (with lower cost fabrication than the 77 and 55 series). The Virage II series features a CoAxe pick-ups which resemble the earlier Three-90 features, but claimed to be lower noise. The one-piece cast MaxConnect bridge of this series is aluminium and provides both a saddle and anchor for the guitar strings.
In 1967 Lipsky introduced a line proto-copies carrying the Domino brand name. Most were inspired by European models such as the EKO Violin guitar. Among the offerings were two models sporting a California cache, the #502 Californian, an asymmetrical copy of a Vox Phantom, and the #CE82 Californian Rebel (wouldn’t California Rebel have made more sense?) shown here.
If you plan to use your delay in conjunction with other stompboxes, it’s important to consider where to place these effects in the chain—especially if you’re using an overdrive, distortion, or fuzz pedal. The most common setup is to place dirt before delay. This is important because it means you’ll be delaying the distorted signal as opposed to distorting a delayed signal, which will sound mushy and indistinct. Because a distortion pedal has the strongest impact on your fundamental tone, it’s typically placed early in the chain, whereas delay is usually placed toward the end of the chain so it can produce repeats of all of the effects added to your guitar sound. Of course, you should experiment for yourself to see what you prefer.
Gretsch is one of the oldest manufacturers on this list. It was founded in 1883 in New York City by Friedrich Gretsch. He was an immigrant from Germany and was only 27 at the time he founded the company. Gretsch has a wide selection of both acoustic style and electric style guitars. They have models in just about everyone’s price range. You can buy a Gretsch for under $500 or over $2000. Their style is fairly unique. They have an almost “classical” look to them. Keep in mind that the older Gretsch guitars were not as consistent in quality as they are today. So if you’re looking to buy used, try to keep it so you’re buying guitars that are made semi-recently. On the other hand, you might get lucky and snag a great deal. As expected, their sound is excellent.
Aside from the superstrat ESP M-10 shown earlier. The ESP LTD EC-10 is also an affordable guitar but with a different body design derived from the Les Paul. The features of this LP inspired guitar that makes it different is the bevels on the body and belly cut at the back for comfort. Its major resemblance to a Les Paul is the humbuckers pick-ups equip on the guitar. Together with the bridge design for having a stopbar and tom bridge without a whammy bar.
Compression/Sustain – a dynamic effect that smooths out the highest and lowest volume levels of your guitar signal to a more consistent level. A compressor also has the side effect of increasing the sustain of your guitar signal. Compression boosts the overall level of your guitar while clamping down on the volume of the loudest parts to prevent clipping. Compressors usually have an attack knob that allows you to control how fast it takes the compressor to start effecting the tone and a threshold knob that sets the volume level that the compressor starts clamping down on peaks.
Octave/Pitch Shift – A frequency-based effect that takes the input of your guitar tone and shifts it in pitch anywhere up to an octave above or below. This is useful to simulate a bass guitar line or the higher pitched strings of a twelve-string guitar. Some octave or pitch shift pedals double your guitar tone before shifting making them more akin to Harmoniser pedals.
In 1992, two more models were added, the single-cutaway BC-40 and the 5-string B-540. Although widely admired[who?] for their high quality and lovely appointments, they proved to have limited appeal due to their $2000-plus list prices. By 1997, all four of these initial basses were dropped in favor of the B-1, a lower-priced ABG with laminated mahogany sides as part of Martin’s 1 series of guitars. The BM, an even less expensive model in Martin’s now discontinued Road series soon followed; it had laminated mahogany sides with a solid mahogany back. Also around this time electronics became standard on Martin basses. The most recent additions are the BC-15, a single-cutaway version with a mahogany top, the BC-16GTE, also a single-cutaway with solid Genuine mahogany back and sides with a gloss top, and the 00C-16GTAE, which is a slimmer thin-line version of the previously mentioned model. As a special edition, Martin offered the Alternative X Bass with jet black High Pressure Laminate back and sides and a Graffiti-patterned Aluminum finish top. This bass was very similar in build to the other guitars in Martin’s X series. There have been two Limited Edition Martin acoustic bass models. The first, the SWB Sting Signature Model, was released in 1999 and was made with woods certified by the Rainforest Alliance’s SmartWood program[citation needed]. The SWB’s top is made with book matched solid Sitka spruce reclaimed from pulp logs, the back, sides and neck are solid certified cherry, and the fingerboard is certified katalox. Sting’s signature is inlaid between the 18th and 19th frets, and a label inside the body states that a portion of the sale price is donated to the Rainforest Foundation International[citation needed]. The second and more recent Limited Edition is the B-28KV Klaus Voormann Signature model released in 2008 for the German market. It has a Sitka spruce top with Solid East Indian Rosewood back and sides and a black Ebony fingerboard. The headstock features a unique art design by Klaus as a circular inlay making each bass a one-of-a-kind. In addition to these U.S.-made instruments, Martin also markets Sigma ABGs made in Korea.
It looks like there was no information about Lyle guitars on google back in the day.Now you can find some info, but very little. I purchased my first guitar of my life age 14 from a seller on ebay for $100. I baught an awesome looking black SG style guitar with the name Lyle on it. Years later now, I know a lot more... Lyle is one of the rarest brands of guitar manufactured in the world. This rarety however does not increase the value of the instrument. Lyle is not a brand that can even be found in the guitar Pricing Guide. I have looked. The value is determined usualy by the seller. If your selling one, hit me up. Lyle was never associated with Gibson. Lyle was never purchased and closed down by Gibson. However, Lyle started manufacturing Gibson style guitars at a cheaper rate but they failed to observe copyright laws. Lyle was created by the Motsimoku Company in Japan from 1965 to 1970. In 1970 the Motsimoku Company was slapped with such high lawsuits by the Gibson Corp of the US, that they bankrupted and closed. Making Lyle one of the rarest brands of guitar because of their extreamely limited production life of 5 years.

Nashville studio engineer Glen Snoddy discovered the Fuzz-Tone sound when recording Marty Robbin’s 1960 hit “Don’t Worry About Me.” Allegedly an overloaded transformer blew in a Langevin tube module, transforming Grady Martin’s bass guitar into a distorted, heavy fuzz. Some put the event down to another case of amplifier malfunction. Either way, Martin continued to use the tone throughout 1961 while Snoddy transistorized the malfunctioning circuit through trial and error, and sold it onto Gibson in 1962.
In the image above, the first higher peak we see is E4 (i.e. the low E-string on a guitar in standard tuning), the second peak is E5 (i.e. an octave higher) and the following high peaks are B5, E6, G#6, B6, D7, and so on. Remember that the test rigs only have two strings, both tuned to E, and plucked open. So what you are hearing is a mish-mash of tons of overtones that shape the character of the “tone” that you hear.

Lets face it: when most folks first pick up the electric guitar, the only other gear they think they might need would be an amp, a pick, some cables and maybe some pedals if they are savvy. As these players become more experienced and move from their garage to live music venues and recording situations, they eventually run into some issues and realize there must be better ways to be heard than turning the amp to 11.
For years, Seymour Duncan has provided guitarists with first-rate, handmade pickups and parts that are anything but stock. All of our products are designed and customized to suit the needs of specific musical styles and the musicians thereof. If you’ve got a guitar that doesn’t have a good-quality set of pickups and seems to lack that “extra something” in the tone department, investing in a set of pickups is your first stop.
In order to play your favorite song, you’ll need to learn guitar chords. Use the images and instructions below to learn how to play each chord. The ChordBuddy device can be used for assistance in knowing where to place your fingers In the images the circles represent where you will be placing your fingers (I=index, M=middle finger, R=ring finger, P=pinky). The X’s represent strings that you will not be strumming while the O represents strings that will be played without any frets.
If it is muted in positions all up and down the neck, and you've already tried different strings, then I think you really need to be looking at the bridge. Is there any sort of slot cut in the saddle for that string? It could be that it is just the right width to kind of kill any sort of vibration from the string. Might be worth slackening the string, lifting the string out of the slot and setting it just a mm or two to the side and tuning it up again to see if that helps. If it does, then you'll need to do something about that saddle. You might be lucky enough to be able to swap it with another string, or maybe even turning it around might make enough of a difference. To be honest it's a hard one to troubleshoot, but if you want to contact me by email about it with some close-up photos, I'd be more than happy to try to help you figure out what the problem is. Email is stueycoolTAKE-THIS-PART-OUT@gmail.com
Visually, what sets this guitar apart is its distinct headstock shape, but there's more to this guitar than meets the eye. Firstly, the guitar's top is crafted from solid cedar, an interesting wood choice because this type of wood is more commonly used on nylon string guitars. The warm tone of cedar matches nicely with the bright sound of wild cherry, a staple tonewood used on the back and sides of most Godin guitars. This combination gives the instrument a more distinct appearance and sound. Other features that don't follow the usual convention include the use of maple for the neck, and its B-Band M-450 T preamp system.
I've been asked why it took so long to make this record. Well, it didn't really take too long to make this record. It took six months to make it. What I'd been doing before that was hopefully a journey I can continue. I guess what we play is still indie or alternative, I don't know all the different terms these days -- I've kind of lost track about what label I'm supposed to be these days. But it's still the kind of music I started playing when I was a kid, really. I'm fronting a band I could have fronted at fifteen or sixteen, so that's quite cool.
So you want to learn how to play guitar but don’t know where to start? No worries. This how to play guitar for beginners guide will cover all the basic requirements to get you started with playing guitar. The guide is split into 2 sections: The Basics – where you’ll learn about the various parts of the guitar, how to hold the guitar and how to tune your guitar. Playing – where you’ll learn popular chords, strumming techniques, and how to read guitar tabs. This guitar for beginners guide is meant for guitarists just starting out, however there are also tips and
I have played all sorts of guitars, Guild, Gibson, Epi, Lowden, Fender etc etc. Walden for a beginner/intermediate are far beyond anything you can get for the same money. Exceptional sounding and great build quality, and because no-one has heard of them you can pick them up for half the price or any of the "named" brands if you get a good used one. I have had my hands on 3 in recent years, I got them for less than £100 each - one for £50 and it held its own with anything else I had that cost nearly £1k new. I would recommend them absolutely.
Why would that be “magical thinking”? Unless you play a sine wave with a synth, the timbre of every instrument is made of a set of freuquencies, a dominant frequency plus a ton of harmonics (which is, I take it, the overtones people talk about). Woods, like every other material, resonate at particular frequencies, and consequently might emphasize a particular subset of these frequencies rather than another subset. Hardly magical thinking.
Half a step up from standard tuning. Used in most of Johnny Cash's music, for "Love Buzz" on Nirvana's Bleach album - apparently by mistake (according to Come As You Are - Michael Azerrad), 3 Doors Down on "Here Without You" (a capo was probably used), Vektor, Soundgarden's "Black Hole Sun" (The low E string was tuned to Eb/D# for a drop Eb/D# tuning), Nickelback on their song "When We Stand Together", Burzum on his first 3 albums, John Fedowitz in his solo project "Ceremony", and Joe Jackson on "Got the Time".
If you’re a beginner you might not feel like you know enough to be able to test play different guitars, but play whatever you know and see if you notice any difference. If you only know a few chords, or even “Smoke on the Water”, then play that, it’s better than nothing! Don’t care about the staff hearing you play, they’re used to it and are probably just happy to have a potential customer.

The Fender Super-Champ X2 HD is a true champion when it comes to versatility and quality, combining old school tube technology with modern amp voicing and digital effects, all in a compact and portable 15W amplifier head. With a single 12AX7 preamp tube and two 6V6 power amp tubes, you can't lump this amp with conventional amp modelers, but you also can't group it with traditional tube amps because it does let you choose from 16 amp voicings that cover everything from clean Tweed tones to high-gain metal. In addition, the amp comes with 15 effects that include variations of reverb, tremolo, modulation and delay. With its low watt rating, the Super-Champ X2 HD is ideal for practice and recording, while being loud and portable enough for small venue gigs. Finally all these features are made available in a compact and more importantly - affordable package.
By the 1960s and 1970s, semiconductor transistor-based amplifiers (also called "solid state") began to become popular. This was in large part because for a given wattage level and feature level, solid state amplifiers are less expensive, lighter weight, and require less maintenance than tube amplifiers. As well, transistor amplifiers are more reliable and less fragile than tube amps. In some cases, tube and solid state technologies are used together, usually with a tube preamplifier driving a solid state power amplifier. There are also an increasing range of products that use digital signal processing (DSP) and digital modeling technology to simulate many different combinations of amp and cabinets.

Guild is an American guitar company that makes some amazing semi-hollow electric guitars such as the Starfire and the Aristocrat. These are guitars that nail the retro-rock sound and have the looks to match. Many classic Guild models have been revived through the Newark Street collection. While these guitars are cool beyond words, where Guild really shines is in the acoustic arena.

Some professional-grade amp heads, such as Ampeg's SVT400-PRO, have an audio crossover, an electronic filter that enables a bassist to split their bass signal into a low-pitched signal (which could be routed to a cabinet suited for low-pitched sounds, such as a 1x15" or 2x15" cabinet), and then send the middle and high-frequencies to a different cabinet suited to this register (e.g., a 2x10" or 4x10" cabinet with a horn-loaded tweeter). Amps with a crossover can either have a single crossover point pre-set at the factory (e.g., 100 Hz) or a knob is provided to enable the bassist to select the frequency where the bass signal is split into low and higher-pitched signal. The SVT400-PRO has a user-adjustable crossover knob. Amps with an adjustable crossover point can enable bassists to fine tune the sound of their bass sound. For example, in some halls, a bassist's usual crossover point may sound too "boomy" or rumbly; turning the crossover knob to send more of the low-pitched bass signal through the 2x10" cab may reduce this problem.

DRILLING THE HOLES Now is a good time to drill the holes for the neck, pick up rings, bridge, string furreles, the control plate and cavity. Here is where I wish I had a drill press but I don't, so I just use a hand held drill. It doesn't matter wher you start drilling you holes, just make sure you use the right size bit for the screws that you will put in them later. To figure this out I compare the thickness of the screw minus the threading. A good rule of thumb is to start off with a bit that will produce a hole that is smaller than the screw. If the hole is too small when you try to screw in the screw then you can move up to the next size bit an re-drill. Be careful of the depth that you drill you hole to as well. A good way to do this is to size up the screw with the bit and mark the bit with a peice of tape. This will help you to keep from going to deep.
The trusty traveler guitar:  There are many makes and models, and of those that we reviewed, some that are cheaply priced (i.e. under $150) are just that- cheap.  Traveler guitars come in all kinds of shapes and sizes, and some more complex models offer foldaway design that buckle at the neck joint.  Additionally, there are acoustic electric models if you desire the flexibility of plugging in.  First, it is best to determine "why" you are seriously considering a travel guitar before getting into the research.  Answer that question for yourself first, and it could steer you away from a specific traveler guitar and toward a different size acoustic guitar body.  Also, it might re-affirm your choice.  Consider the following questions:

{ "name": "Heritage Cherry Sunburst", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Heritage-Cherry-Sunburst-1500000014896.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "10-20-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014896", "shipToStore": true, "displaySku": "J40301000003000", "displayId": "1500000014896   POS #: 112318340", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000003000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Heritage-Cherry-Sunburst/J40301000003000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Heritage Cherry Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }

Add your vote to this list of the top guitarists ever and help to pick the best guitar player in the history of music. These roock, jazz, blues guitarists have all had long careers filled with success and failure. Some are still jamming out today, which other rock stars died too young, before their talents could be fully appreciated. Now is your chance to give the best guitar players in the world some recognition.
You'd mentioned that the bridge pickup is substantially louder on Telecasters than the neck. I have an American Standard so the relationship between the two might not be identical but I was able to make the volume levels comparable by raising my neck pickup substantially so that only about a half inch of space remained between the string and the pickup. They're now about equal volume and if anything the front pickup sounds better and more defined as a result.

Even if he had never progressed beyond the brain-rattling riffing of "2112" and "Xanadu," Rush's guitarist would have left his mark on Metallica and other like-minded metalheads. But he went on to fill out Rush's power-trio sound with a seamless mix of lush arpeggios and rock crunch that sounded like at least two players at once. "The guitar just had to make a broader statement," he says. Alex Lifeson reserves his most daring playing for his solos – just try wrapping your head around the extra­terrestrial lunacy of "Freewill."


Now that we mentioned some of the exotics, it’s time to go back to the roots. Epiphone Les Paul Standard is as old school as it gets. Legendary LP body style that brings a no-nonsense combo of hardware has always been the way to go. I actually have one of these, and after years of playing it keeps surprising me. I’d say it easily punches way above its price range.
Control knobs and buttons are typically on the front of the cabinet or chassis, though in some cases, the knobs are on a recessed panel at the back of the top of the amplifier. The most basic amps only have a few knobs, which typically control volume, bass and treble. More expensive amps may have a number of knobs that control pre-amp volume (or "gain"), distortion or overdrive, volume, bass, mid and treble, and reverb. Some older amps (and their re-issued versions) have a knob that controls a vibrato or tremolo effect. The 1/4" input jack is typically mounted on the front of the amplifier. In the simplest, least expensive amplifiers, this 1/4" jack is the only jack on the amplifier.
You have tonnes of distortion models based on the likes of the classic DS-1 (Dist-1) and Pro Co Rat (Squeak) pedals and more as well as boost, delay and modulation effects. An onboard tuner, stereo/mono looper with up to 80- seconds of phrase recording, tap tempo, stereo headphone output for silent practice and the ability to use up to 7 effects simultaneously.
The Gibson-owned Epiphone Company makes around 20 models of the Les Paul, most are similar copies of Gibson-made models, although when inspected closely, the Gibson originals are most often superior in craftsmanship and materials. Made in places outside the U.S., the Epiphone Les Pauls are made from more commonly available woods using less expensive foreign labor and have less hand detailing than the Gibson models, and, as a result, sell for a lower price. Epiphone Guitar Co. has been owned by Gibson Guitars since the 1950s. Once Gibson purchased Epiphone they quickly began making lower-quality guitars based on Gibson designs.[24]
Next up is another electric guitar from Fender Standard, namely the American Special Telecaster. This one has two Texas Special Tele pickups and it’s perfect for great American genres like country, rock and blues. This American Special Telecaster has a lovely alder body and the neck is maple. Just like number one on our list, the 50’s Stratocaster, it’s vintage-looking, but the Vintage Blonde model we’re reviewing looks vintage in a cooler, less sentimental way.

Support your local music shops! The Guitar Store is a great spot in a convenient location. Helpful and friendly staff all around. A good assortment of electric and acoustic guitars, amps, and more pedals than you could possibly imagine. No cases full of BOSS Metal Zones either - we're talking real pedals for the pedal enthusiast. They also are great for lessons/workshops and instrument repair. We had been bugging the guitarist in my band for having a noisy output jack for weeks. He took his guitar in, came in during a slow time, and they replaced the jack for him on the spot! Amazing! So while Guitar Center might be your only option to buy that fancy pack of tapered-B 5-String bass strings, The Guitar Store should be your first choice for literally anything else. Check it out! SUPPORT LOCAL MUSIC SHOPS! But they make you leave your backpack at the counter?!? ZERO STARS!!!!! ;-)
I dont know but im looking for a good bass guitar too. Depends on your price range. Personally I realy like Ibanez basses and think they do really good low to mid price range basses. If you are looking at a professional quality basses you should look at Rickenbacker, Musicman (stingray), Fender, Lakland and Shadowsky as they are the main brands for professional basses.

Gold Plated strings are really just 80/20 Bronze & Zinc wound nylon strings.  They are also used to produce the bass wound strings of a set of classical strings.  They maintain their place in the market due to having a much brighter tone than silver plated strings and are used by many professionals due to their capability to project louder and sharper.
{ "thumbImageID": "SG-Special-Electric-Guitar-Cherry/517239000019000", "defaultDisplayName": "Epiphone SG-Special Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51273888007012", "price": "179.00", "regularPrice": "179.00", "msrpPrice": "299.00", "priceVisibility": "1", "skuUrl": "/Epiphone/SG-Special-Electric-Guitar-Cherry-1273888007012.gc", "skuImageId": "SG-Special-Electric-Guitar-Cherry/517239000019000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SG-Special-Electric-Guitar-Cherry/517239000019000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51273888006945", "price": "199.00", "regularPrice": "199.00", "msrpPrice": "299.00", "priceVisibility": "1", "skuUrl": "/Epiphone/SG-Special-Electric-Guitar-Ebony-1273888006945.gc", "skuImageId": "SG-Special-Electric-Guitar-Ebony/517239000035000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SG-Special-Electric-Guitar-Ebony/517239000035000-00-60x60.jpg", "imgAlt": "" } ] }
PRS guitars are among the best on the market. Their style, tone and design are unique, giving them a pretty good chance against much more established brands. PRS Custom 24 has been my go-to choice, and will remain so in foreseeable future. If you are looking for good old American craftsmanship combined with a killer tone, PRS is definitely worth checking out.
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
Fuzz was originally intended to recreate the classic 1960's tone of an overdriven tube amp combined with torn speaker cones. Oldschool guitar players (like Link Wray) (citation needed) would use a screwdriver to poke several holes through the paperboard part of the guitar amp speaker to achieve a similar sound. Since the original designs, more extreme fuzz pedals have been designed and produced, incorporating octave-up effects, oscillation, gating, and greater amounts of distortion.
Were its fate left to the Electric Storms, Ovation may never have made it out of the ’60s. However, the breakthrough occurred when the company picked up the endorsement of pop star Glen Campbell, who began his career as a session guitarist and folk singer, at one point touring behind Ricky Nelson. In ’65 he was a member of the Beach Boys, but by the late ’60s he had broken through to be an enormously popular balladeer with country-tinged hits like “By the Time I Get to Phoenix” and “Wichita Lineman.”
• What they’re made of: Frets are typically made of nickel-silver or nickel-steel alloys, or – less often – brass, copper alloy or stainless steel. The harder and more dense the material, with stainless at the top of the scale and soft nickel at the bottom, the brighter and more cutting the notes played on a guitar should sound. Most manufacturers use nickel alloys because the metal is soft and easy to work with. At this point, most guitarists’ ears have been developed to the sound of nickel as well, and most guitar buyers have a tendency to balk at the unfamiliar when shopping for instruments.
Accompanying the Supro frying pan in the ’36 Peate catalog was the Supro amplifier. This had a small, rectangular cabinet with a round grillplate with the screws attaching the speaker showing around the edges. The grille cover was still similar to a resonator cover, with large diamond cutouts, backed with cloth, and finished with black wrinkle paint. A leather handle sat on top, and metal bumper guards graced the lower corners. No information is available regarding specs.

The thing is, if you aren’t a pro (and if you’re reading this, you probably aren’t) you don’t need to concern yourself with every element of the electric guitar. You just need a briefing on body styles and pickups, arguably the two most important pieces of a guitar’s build. More importantly, asking yourself a couple simple questions about what you’re after will help you immensely. We’ve got all that right here, plus a few great axes that should at least serve as starting points on your search. As for the Ziggy Stardust jumpsuit and the perfect rock-god pose…look elsewhere.
Anytime a single coil-sized humbucker is split, a tiny coil is the one seeing the strings, so the volume is going to drop. You can split to the other coil, or set the switch to wire the pickup in parallel, which will keep it hum cancelling. However, splitting to the other coil in a neck position Cool Rails probably won’t be a big difference in sound since the coils are pretty close together and pretty small.

The EB-28 bass was very similar to the guitar in appointments and controls. It had a 22-fret ebony fingerboard, 33.825″ scale, a DiMarzio P-style neck pickup and a DiMarzio J-style pickup at the bridge. It, too, carried a Schaller bridge and Schaller M-4 tuners. Around 4,854 each of these 28 Series guitars and basses were built between January 1981 and February 1982.


It also comes in a colour that is unique and leaves most other guitars in the dust - their OPB colour, or Open Pore Black finish. It’s a matte black guitar. Matte (or a satin finish) means that you won’t have the grubby finger marks or oil stains that a glossy finish would have. Plus, if you play for a while and your palms get sweaty, this matte finish won’t be slick and slipper - unlike guitars with a glossy finish.
The “quacky” tone of the middle and bridge pickups, popularized by players such as David Gilmour, Rory Gallagher, Mark Knopfler, Bob Dylan, Scott Thurston, Ronnie Wood, Ed King, Eric Clapton and Robert Cray, can be obtained by using the pickup selector in positions 2 and 4. The neck and middle pickups are each wired to a tone control that incorporates a single, shared tone capacitor, whereas the bridge pickup, which is slanted towards the high strings for a more trebly sound, has no tone control for maximum brightness. On many modern Stratocasters, the first tone affects the neck pickup; the second tone affects the middle and bridge pickups; on some Artist Series models (Eric Clapton and Buddy Guy signature guitars), the first tone is a presence circuit that cuts or boosts treble and bass frequencies, affecting all the pickups; the second tone is an active midrange booster that boosts the midrange frequencies up to 25dB (12dB on certain models) to produce a fatter humbucker-like sound.

(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=248.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodJ40301, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=131.12, restockStartAmount=null, listPrice=149.0, priceVisibility=1, usedCount=1, salePrice=149.0, isOnSale=false, showMSRP=true, restockCount=0}


When technology changed from valve to solid-state, it was noticed that solid-state amplifiers lacked warmth and bass performance, and had to be twice as powerful as valve amplifiers, to sound as loud. Current Drive: Solid-state amplifiers behave in ‘Voltage Drive’. This acts as a short circuit (zero output impedance, or 100% damping factor) across the speakers, causing excessive damping, which reduces efficiency, limiting responsiveness. Valve amplifiers behave in ‘Current Drive’. This represents an open circuit across the speaker without over damping, allowing maximum response and efficiency.

Another cool place I just found was Madison Guitar Repair out of Fridley. I went there a couple weeks ago. It's a little hole in the wall place where they just work on guitars and have tons of parts. Really nice guys that seem like they know their stuff pretty dang well. Never used them but considering that all they do is luthier work I'd give them a shot.
Explorer-style guitars dropped off the radar after the mid 1980s, but were revived again under the influence of late Pantera guitarist Dimebag Darrell Abbott toward the end of the ’90s. Weird shapes were back, if anything can ever be said to be “back.” What goes around comes around. There’s clearly an algorithm going on that originated back in 1958!

Greg's Vintage Guitars Atlanta ,"we sell keepers",The Vintage Guitar News and Views.....vintage guitars for sale ,Atlanta georgia.Vintage guitars ,players guitars cool affordable,rare,vintage and collectible guitar and gear sales,the obscure and under appreciated guitars.Vintage fender guitars,vintage Gibson guitars,Vintage Ibanez guitars,Guild guitars,Valley arts guitars,Gretsch guitars,Taylor guitars,Martin guitars,Takamine guitars,Stratocasters ,Telecasters,guitar cases,and guitar parts. Both vintage electric guitars and vintage acoustic guitars for sale . Vintage Grammer guitars, Martin guitars. Also included are Fender amps,Guild amps,Magnatone amps,tweed,blackface,silverface amps,amp parts and repair..Electric guitars sales,acoustic guitars for sale ,vintage electric guitars ,vintage acoustic guitars,vintage bass guitars ,vintage fender guitars,vintage Gibson guitars,vintage Ibanez guitars,vintage guild guitars,vintage fender amps.vintage amps,fender,fender telecasters,Gibson Les Paul,,vintage guitars for sale ,guitars for trade ,buying guitars, sell guitars, vintage fender stratocaster,fender esquire,fender P- bass, fender jazz bass,  amps,the vintage guitar news and views, vintage guitar trader,vintage guitar parts ,vintage guitar tuning keys,So whether you are in the market to purchase a vintage or collectible guitar,consign a vintage guitar or place a collectible or vintage guitar on layaway contact Greg's Vintage Guitars Atlanta. vintage guitar pickups, vintage and collectible  guitar sales.


Cole Clark guitars are made largely using Australian indigenous timbers. Solid timber is used in preference to plywood.[2] Clark’s discovery of the best type of wood for his guitars came whilst searching in Australia in 1998. He came across Bunya Pine, and found out that it had the perfect characteristics for the sound board on an acoustic guitar. Whilst researching this type of wood, Clark also discovered that Bunya is about 18% stronger than Spruce wood, which a traditional choice when constructing a guitar. Blackwood is also another favourite material of Cole Clark’s for building their guitars (http://www.coleclarkguitars.com/technology.asp).
The new AC15 'Twin' retains the all-important dual-EL84, cathode-biased output section of its forebear, but otherwise it's very different. A quick scan across the top panel reveals two inputs for independent access to either normal or top boost channels. One benefit of the bigger, 2x12 enclosure is that it provides ample room for a full-length reverb tank, housed in the bottom. There's also an in-built tremolo effect, with controls for depth and speed. But the whole point of this amp is the pair of 25-watt Celestion G12M Greenback speakers. They are the speaker of rock in so many cases and while purists might hope for Celestion Blues, they would add a good £300 at least to the price; and he increased power handling of two Greenbacks on the end of just 15 watts is quite a tantalising prospect. It's fair to say that even with the master volume set-up, the magic doesn't really start happening until the amp's lungs are at least half way open, but happily, that's not far from perfect for many of today's pub and bar gigs - it may even be too much for some. The AC15 'Twin' does sound magnificent when clean, but listen carefully to those amps or this and it's rarely completely undistorted. That harmonically rich drive that was never supposed to be there is the key characteristic that latter day, non-master volume AC users find hardest to replicate.

There is traditionally a gap between how we enjoy the sound of our guitars and the way they’re represented plugged in. Enter Yamaha, a leader in stage-ready acoustic technology for decades - and in the A5R ARE, it may have just offered us a very desirable solution. The A5R''s rounded fretboard edges offer an enjoyable playing experience that mimics the feeling of guitars that have been played in to a degree and it has an ethereal quality in the high ranges, even though some treble resonance is traded with the lower action. The A5’s resonance and bright balance is a fine showcase for the clever SRT2 preamp - we actually couldn’t dial in a ‘bad’ sound on it because the treble and bass controls mirror the natural subtlety of the pickup/mic dynamic design. An electro experience that captures the sound of an unplugged acoustic? The SRT2 is one of the closest to get there yet. An update that marks the A Series out as an essential consideration for players who rely on a consistent and controllable stage sound.


However, 50 x does not mean that the two pickups wired in parallel are only half as loud as a single pickup, nor does 200 x mean that the two pickups wired in series are twice as loud as one pickup. Our human hearing does not work this way. Why that’s the case is beyond the scope of this column, but for our guitar-wiring purposes, it’s enough to know that the human ear doesn’t operate in a linear way.


Schecter is one of the more recent brands to start building serious trust and authority on the guitar market. They started out as a parts company, only to cross into making their own guitars later on. It is no secret that Schecter guitars are first and foremost built with heavier genres in mind. Almost every model they offer packs so much range, though, that you can easily play anything you want without compromise.

Go to the blues and jazz though and things change. Listen to the guitars. Warm, mellow, beefy, thick, with tons of butter. And those guitar sounds are mostly clean or overdriven (not distorted as with a distortion pedal). Using the neck pickup works well for this, but in addition to that, guitarists roll off the tone knob to cut more of the treble to warm up the tone and make it blend with the rest of the music. It also keeps the tone beefy and thick so the soloist can cut through the mix but without sounding as harsh like a rock player. Don’t get it wrong though, some blues and jazz tones will require trebley tones, but the guitarist will use the tone knob to change his tone instantly without having to change his amp settings for each movement or song, especially when improvisations and long instrumentals are involved.
First of all we have to make special mention for the build quality of the RP500. It has a cast-metal chassis and vacuum-style footswitches like on an actual stompbox, and it just feels like it’s built better than any Line 6 or Boss multi-effect we’ve tried. On the rear of the RP500 you’ll find a ¼” input for your guitar, stereo output, headphones jack, AUX in, balanced XLR stereo out, and a USB port. A power supply is included, so points for DigiTech over Boss for doing users that courtesy. A look at the front panel layout reveals it’s pretty unique. It doesn’t have the side-by-side stompbox look we love so much in the Zoom G3X, it has fewer knobs than the Boss ME-80, and yet it looks more straightforward to use than the Line 6 POD HD500X. The dimensions and weight are almost exactly the same as the Boss ME-80 (about 20 inches wide, and weighs approximately 8 lbs).
I got this one because my 18-year-old Takamine G-series has some serious fret wear, and a slightly warped neck, even with the truss rod maxed out, and will cost more to repair/refurbish than this one cost outright. Hence, the action is quite high, and it's hard to play bar chords higher than the 3rd fret, and there's some noticeable buzz and rattle unless I hold my mouth just right...
{ "thumbImageID": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst/J32680000003000", "defaultDisplayName": "Fender American Elite Jazz Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000005995", "price": "2,149.99", "regularPrice": "2,149.99", "msrpPrice": "2,150.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst-1500000005995.gc", "skuImageId": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst/J32680000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst/J32680000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000005994", "price": "2,149.99", "regularPrice": "2,149.99", "msrpPrice": "2,150.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Natural-1500000005994.gc", "skuImageId": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Natural/J32680000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Natural/J32680000002000-00-60x60.jpg", "imgAlt": "" } ] }
The very first production electric guitar was the Stromberg Electro, developed by Hank Kuhrmeyer and introduced in 1928. It was pretty much a kludge. It was an acoustic guitar with a magnetic pickup fitted to the soundboard... Stromberg/Kay Instruments made a resonator version of this, too. The weight of the pickup, though, destroyed the guitar's soundboard over time.
For punchy tones and a clear, high tone, you might want to consider the EMG JH James Hetfield Humbucker Set. Designed specifically for Metallica's front man, this set features both a neck and bridge pickup that can be used together or separately. If screaming highs and bluesy lows are what you're after, the Seymour Duncan SH-1 1959 Model Electric Guitar Pickup is a solid choice. Its enameled wire, nickel plated studs and balanced coil windings produce great sustain, making this neck pickup a great addition to your Gibson or Les Paul. For an electric guitar pickup that offers great range for different genres, a Gibson '57 Classic Plus Pickup can help you make your musical mark. This bridge pickup delivers a slightly higher output without sacrificing the rich, vintage tone of your instrument. The Seymour Duncan SH-PG1 Pearly Gates Pickup is another great choice if you want some kick combined with a well-rounded sound. Your choice for an electric guitar pickup really comes down to personal preference and what kind of sound you're looking for. Whether you're jamming in the garage, recording live in the studio or taking centre stage every night, you're sure to find the electric guitar pickup that best suits your needs.
Re-amping is another increasingly common production technique, often used at the mixdown stage. This process involves a dedicated re-amping device, which takes a line-level feed from a mixing console or DAW interface and converts that signal's level and impedance to one that a guitar amplifier is able to accept. That signal is usually a separate "dry" (unamplified and unprocessed) guitar track recorded using an active 500kOhm direct box placed between the guitar and the amp.

Nice-Keys-CompletePlus-JNv2.0  A large set with three different piano types plus all the nice instruments.  All in a package of 943mb.  Pianos have different brightness and resonance settings available and all the nice instruments from EPs, Pads, Organs, Strings, Orchestra and Synths are included.  A printable link to the list of available instruments is here  Nice-Keys-CompletePlus-Instrument List
This is a right handed 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Natural Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Natural Finish. I also have the same guitar in Cherry finish, one of only 5 in the Cherry finish.
A chorus effect alters the duplicated waveform in a more subtle, nuanced way. The altered waveform will sound much like the original, but just different enough to sound like multiple voices playing the same note or notes. As it is usually applied, chorus sounds like the same signal running through two amps with a very slight delay between them. In fact, Pat Metheny's famous chorus sound is produced in exactly this manner, using no actual chorus effect at all.
These guitars use very cheap materials. I bought a washburn WM24v PROE for $300 and it come with Mahogany body & neck, phenolic fretboard, emg81/85 and original floyd rose... Ibanez RG costs $400 and comes with basswood body, bolt on maple neck, rosewood fingerboard, shoddy pickups and a licensed floyd that WILL NOT stay in tune. Poor quality for money, if you get a Ibanez go for a fixed bridge/string-thru because their trems are HORRIBLE! Original floyd is the only way to go!
: : I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.

Since National had applied for a patent on the single cone (US patent #1,808,756), Dopyera had to develop an alternative design. He did this by inverting the cone so that, rather than having the strings rest on the apex of the cone as the National method did, they rested on a cast aluminum spider that had eight legs sitting on the perimeter of the downward-pointing cone (US patent #1,896,484).
In the ’80s, with the advent of new digital effects units, the “refrigerator racks” appeared on the scene—custom rigs built for the studio and touring pros of the day. Effects loops in guitar amps also became commonplace—allowing guitarists to insert line-level effects after the distortion generating preamp stages of their amps, and before the power amp stage—a big tonal improvement when using time-based effects like delay and reverb.
While we are on the subject of cute little things, I want you to consider the idea of a small amplifier with a cute name but with the looks of Marlon Brando in his early years. Wait, no, that is incredibly freaky and not something anyone wants to imagine. I mean how would you even connect your guitar to that? What I mean is imagine an incredibly handsome amplifier. Well, now that you have, let me ruin your dreams by directing your attention at the pignose 7-10 legendary portable amplifier, which is an actually rather handsome piece of equipment. The great thing about this beautiful box is that it also has a great sound, comparable to that of its betters (read: of the more expensive models). Being very light and fun to possess, it is highly portable and loud enough to captivate audiences. A great, affordable small amplifier that does not look Marlon Brando in any way, and thank god for that.
Fender is an American company founded by Clarence Leonidas Fender in the year 1946. The company headquarter is located in Scottsdale, Arizona, United States. The company provides a wide range of guitars to customers at an attractive price range. The company is best manufacturer of amplifiers and stringed instruments and has become the leading guitar brand in India too. - Musical-instruments-Online
Listing the initial six harmonics of the G note, this open-G tuning was used by Joni Mitchell for "Electricity", "For the Roses", and "Hunter (The Good Samaritan)".[9] It was also used by Mick Ralphs for "Hey Hey" on Bad Company's debut album.[5] and on the Meowtain song "Alleyway" Stone Gossard also used this tuning in the song "Daughter" by Pearl Jam.
Hello all. I have a brand name guitar, which was very popular in the 1980s, and still is being manufactured under Gibson today. I didn't see it in your list though. It's a Kramer Stagemaster. It's a beautiful guitar, which I may never part with. Strat-Style with Neck-Thru-Body & Floyd Rose Trem. The headstock states Kramer American. These were passed off as American made models, however I understand that they were actually made in Japan. The style and appointments are strikingly similar to my Ibanez Proline 2550 from the same era, which has 'Crafted in Japan' written on the headstock. I know that Kramer made a lot of American made guitars out of Neptune, New Jersey, however these were all bolt-on neck guitars. Does anyone know where these Neck-Thru Kramers were made, or why they have American printed on the headstock if they are not tues American made guitars?
The FR6UC's matt black flat finish and lack of bling lends the instrument a mean, no-nonsense aesthetic that would be a perfect fit for the modern metalcore player. There's an ebony fingerboard and its neck is a five-piece affair, with two thin strips of 0.5mm walnut between three sections of maple. The FR6UC's suitably rock-looking distressed pickup covers house a pair of Bare Knuckle Aftermath humbuckers with "accelerated bass response for exceptionally fast tracking of high-speed staccato riffing with crushing midrange and precise high-end articulation". The 14.7k-ohm bridge unit comprises a trio of ceramic magnets, while the neck is Alnico V with a DC resistance of 11.5k ohms. This instrument is built cleanly with excellent fretwork, as you would expect from a Japanese guitar at this price point, although it has to be noted that - considering its relatively compact proportions - it's a little on the weighty side, weighing in at 3.8kg (8.4lbs). The FR6UC's Bare Knuckle Aftermaths in full humbucking mode are perfect for a gamut of king-size-yet- articulate heavy rock tones, from Foo Fighters and Queens Of The Stone Age right through to Deftones and Slipknot. That said, the Aftermaths are by no means all about metallic high gain; back off the volume and switch to position two or four to get one of the inner coils in isolation and you'll enjoy pleasantly springy Strat-style tones. It may be none-more-black in appearance, but there's a broad range of hues on the FR6UC's sonic palette.
The Marine Band 365 Steve Baker Special (365/28 SBS) possesses the same construction as the original 365, but with low pitched tuning to their natural major keys, available in C, D, G, A, and F. It is named for, and was developed in part by noted harmonicist Steve Baker, who resides in Germany and has contributed to the design of several other Hohner harmonica models, including the Marine Bands Deluxe and Crossover.[18]
I have my El Maya EM 1300 ( El Maya Japan, Kobe instruments) since 1989 but it was built during the end of 1982 and EL Maya Strat version, guitars are neck trough body, amazing instruments they are better then any guitars i ever played maybe I'm not objective , only my US Hamer is close or on that level. Does Anybody have any El Maya? and that you maybe wish to sell it? More over what are the fer prices for the almost mint state of those guitars, regards miki.
Fortunately I did some research, performed some trial and error experimentation on my own semi-hollow (a very nice Epiphone Dot) and found what I consider to be the best way to wire up a hollow body guitar. You won’t need any uncommon tools or equipment – just a wrench set (or an adjustable wrench), plenty of wire, a pair of needle-nose pliers, a soldering iron, and a bit of patience. I’ve included plenty of pics to help illustrate each step.
The Gibson style guitars generally have shorter stubbier necks, with a 233/4 inch scale length, which suits some but not all. The Les Paul, the quintessential model, boasts twin humbucking pick-ups which effectively reduce noise and produce the thick, warm tone associated with Gibsons. It is difficult not to be impressed by the tradition of Les Paul guitars. No-one will ever convince me there is a better looking guitar style. For under $1000 the Epiphone Les Paul Standard will give you a little bit of the legend to take home and for many that's a good enough reason to buy one. Epiphones are cheaper factory made versions of the Gibson USA range. For those who learn on Gibson style guitars the Les Paul is what all guitars are measured against.  more...

I'm unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar "Splender" claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.


Repair body wings. These wings form the main body shape and may have been broken by dropping the guitar or other damaging methods. If you do not properly glue in the wings you will need to use extra caution as to not break the bond. Repairing wings or any body wood is rarely necessary, especially on a thick guitar body such as a Les Paul Standard. It may be needed on a smaller bodied guitar much like a Les Paul Junior.

Nice-Keys-CompletePlus-JNv2.0  A large set with three different piano types plus all the nice instruments.  All in a package of 943mb.  Pianos have different brightness and resonance settings available and all the nice instruments from EPs, Pads, Organs, Strings, Orchestra and Synths are included.  A printable link to the list of available instruments is here  Nice-Keys-CompletePlus-Instrument List


I am sorry to hear this, Andrew. Rear shifted bracing should help protect against the kind of top bulges normally seen behind the bridge. Unfortunately, when it comes to guitars made by hand out of organic materials like thin, solid wood, some pieces of wood will misbehave. The old saying is a guitar takes about two years before the wood stops trying to turn back into a tree.
I knew what it is that I need to do. The friend who worked on it with me said when we were finished, "Oh right, it sounds like all your records all put together." I guess that got the job down. Without getting too technical about it or elitist, it kind of does the job of a Gretsch, sonically, and a Rickenbacker, sonically, but I play it like a Fender. It's kind of handy, really. I used to it pretty much exclusively during my time with Modest Mouse. And totally exclusively during my time with the Cribs. I've used it nearly entirely on the new solo record.

The same goes for Electrovoice's RE20, which counts Steve Albini, John Fry, and especially Glenn Kolotkin amongst its friends. "I like to use RE20s on most amplifiers when they're available", says Glenn, "because the quality is great and they can take really high levels. They're very directional and they're great for rock and roll." The mic also exhibits an unusually wide and flat frequency response and is specially designed to resist proximity effect.


Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Inlay: Custom - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black - Pickups: Ibanez - String Instrument Finish: Satin Oil, Transparent Black Sunburst
Reverb's Free Online Price Guide: This specialty vintage guitar site is one of the largest, most carefully maintained used vintage guitar and bass shops on the internet. It sells hundreds of used guitars and basses of all makes and models. It offers a free online Price Guide where you simply type in the model of instrument you have, and Reverb will analyze its vast database of transactions and give you a large result filled with prices. This gives you a real-time look at the market and where your particular kind of instrument fits in. It is a living, breathing blue book, and (the best part) it is free.
You aren’t likely to really know what works best until you get the song a little further along in the mix, when you can hear how the guitar sound sits with the vocals and other instrument tracks. Sometimes, what sounds like the best guitar tone in the room isn’t always the most effective guitar tone in the track, but as ever, at this point you can only take a stab at what you think will work. Through experience, you’ll build a tool kit of go-to mic positions that achieve what you are seeking.
In the fall of 1964, it's generally accepted that hide glue was replaced with white polyvinyl acetate PVA glue (Elmer's) after the move to the new Martin build facility. (But hide glue was still used until the mid-seventies for gluing tops to the rim and in some other situations.) A notation was written in Grant Remaley's personal memos on Sept 29, 1964 indicating Martin was starting to use "cold" glue. It is generally thought the type of glue used does affect the sound of the guitar. Starting some time in the 1980s Martin started switching from white glue to yellow aliphatic resin (titebond).
I am 60 years old. I want a guitar (acoustic). I have decided on to retrain myself towards finger pickin style. I am researching knowledge and the tonal properties of the wood / tonal qualitites. I have very small (5.1). My hands are small. Neck demensions are very important towards please let me be trained so i can determine neck width and shape for my guitar
The full-size electric guitars we tested are the Epiphone Les Paul SL, Ibanez GRGA120 Gio, Indio 66 Classic, Indio Retro DLX Quilted Maple, Jackson JS11 Dinky, Squier by Fender Affinity Series Jazzmaster, Squier by Fender HSS Bullet Strat, and Yamaha Pacifica PAC012. The short-scale guitars we tested are the Epiphone Les Paul Express, Ibanez GRGM21 Mikro, Jackson Dinky Minion JS1X, Jackson Rhoads Minion JS1X, and Squier by Fender Mini Strat.

Johnny Marr is a chief architect of the post-modern rock-guitar aesthetic. As the guitarist for seminal Eighties poetic pop stars the Smiths, he created a tonal palette and crisp stylistic approach that still forms the roadmap for much modern rock guitar playing. It was Marr who created the orchestral guitar soundscapes that enhanced the moody drama of Smiths singer Morrissey’s introspective lyrics and ironically detached vocals.
×