The numbers listed here show the LAST serial number produced for that year. Martin produced all guitar serial number sequentially. These serial number apply to all Martin guitars, flat top and arch top. It does not apply to ukes (except for the first year, they do not have a serial number). Does not apply to Martin mandolins either (they have their own serial number system).
It's all well and good picking the pioneers of Solo guitar but no way are they at the standard of the guitarists out these days. I do think though that Hendrix definitely should be there. The man's got the best flow I've ever heard. David Gilmour is a must. He knows how to make a solo sound good. Clapton isn't even there? You put Jack White there and Clapton isn't there? Who the hell compiled this thing????
All Gibson-brand guitars are currently made at three facilities, depending on the type of guitar. Solid body electric guitars such as the Gibson Les Paul and the Gibson SG are made in Nashville, Tennessee. Semi-acoustic guitars such as the Gibson ES Series are made in Memphis, Tennessee. Full acoustic guitars such as the Gibson J Series are made in Bozeman, Montana. The Nashville and Bozeman facilities are off-limits to visitors, but the Memphis facility gives regularly scheduled factory tours.
In 1942, Valco unveiled a new Hawaiian lap steel, the Irene, which was offered as a Silvertone in the ’42 Sears catalog. Clearly inspired by the Supro’s first wood-bodied Hawaiian with the pear-shaped body from ’36-37, the Irene had a slightly narrower body and more squared-off corners, and was covered in white pearloid. It also featured a light-colored, painted-on pickguard with dark position markers. Basically, this had the same pickup and control plate as featured on the Clipper.
Some electric guitars such as the Parker Fly Deluxe® have stereo jacks to output both the magnetic and piezo pickups. For this, the Radial PZ-Select™ was born, allowing the different pickup’s tones to be adjusted and switched between without messing with the guitar’s knobs. Guitar virtuoso Dave Martone writes: “I always wanted to be able to turn these guitar sounds on and off with my feet, because my hands would always be doing something and could not get to the switches on the guitar fast enough. Frustration set in until Peter Janis at Radial contacted me and work began on the PZ-Select. There were approximately four prototypes made as we went through the necessary changes and then BAM!!! An amazing unit was born! No longer do I need that clunky cable. I use a regular TRS cable and that’s it! No more grounding issues or phase issues!!! The PZ-Select gives me full switching capability with lights to tell what channel is active! Tuner out! Piezo FX loop! Drag™ control! XLR balanced Piezo out and the list goes on!”
As one of the best electric guitars under 200 dollars, the instrument utilizes an agathis body, a bolt-on maple neck, a sonokeling neck, and a classic rosewood fingerboard with 22 frets and white dot inlays. The electronic section features a peculiar combination of one humbucker and two single pickups, allowing the guitar to cover plenty of sonic ground.
Wengrow said that Gibson got outmaneuvered by its competitors. “In the 1950s and 60s, it was really just Fender and Gibson as the two main guitar makers and they became the standard bearers. But other guitar makers such as Ibanez, Jackson, Yamaha and Paul Reed Smith, came to existence and copied their standards but continually updated many features and customizations that better reflected the idiosyncrasies of the times, often for cheaper prices.”
Anyway, this little beast didn’t need much work. This is one of the pleasures of working on a Champ-style practice amp. They have so little in them, there’s simply not much to go wrong or fix. This one, it turned out, only needed a filter cap job, a new preamp tube and one coupling cap. Piece o’ cake. Twenty minutes of soldering and one $4.00 7F7 tube later, I had a monster little Champ-esque amplifier (actually it sounds a little more like the Gibson Skylark than a Champ, but that’s cool by me) for under $80.
The Epiphone Company is a musical instrument company which was founded in the year 1873. Epiphone is specialized in making Guitars and are one of the largest producers of guitars in the world. Epiphone has several ranges to choose from, as they brand them in different groups. Few of the Epiphone ranges of guitars are, Epiphone Sheraton, Epiphone Casino, Epiphone Texan and The Dot etc. Besides guitars Epiphone also manufactured upright basses, banjos and other forms of stringed instruments.
Derived from standard EADGBE, all the strings are tuned lower by the same interval, thus providing the same chord positions transposed to a lower key. Lower tunings are popular among rock and heavy metal bands. The reason for tuning down below standard pitch is usually either to accommodate a singer's vocal range or to get a deeper/heavier sound.[38]
Continuing the example of making comparisons of specifications, there are Guilds in this price range that come with all solid woods, a rosewood fretboard, and with built-in tuners. Also, Epiphone Masterbuilt has solid wood acoustics, even some with cedar tops which are highly sought after by finger style players, plus they have a rosewood fretboard, a built-in tuner, two pickups and deluxe tuning machines. Moreover, both of the above guitars sell for less than the Taylor 200 series model you listed. So which is better?
Semi-acoustic guitars have hollow bodies which give them a warmer and more dynamic range of sounds. They are vulnerable to unwanted feedback as the distorted sound increases the chances of feedback. That’s why we don’t see rock and metal musicians playing a semi-acoustic guitar. Many guitars have solid blocks inside for decreasing the feedback factor. Check out our list of semi-acoustic electric guitars here.
Of course, the big news was the introduction of the Spectrum 5. This had a slim, highly contoured body with a pointed upper horn pointing up and a hooked lower horn. The body featured a German carve relief along the edge. The head was the new hooked kind from ’64-65, while inlays were triangular “picks,” sort of like Kays of the time. Pickguards were two-part plastic covering the entire area under the strings, with volume and tone controls and stereo and mono jacks. The “vegematic” push-buttons came in five groovy colors.
PUENTE HARDTAIL Para cambiar las cuerdas, pase las nuevas cuerdas por los ojales correspondientes situados en la parte posterior de la guitarra y llévelas por encima de la silleta. Puede ajustar la octavación girando el tornillo de octavación situado en la parte posterior del puente con un destornillador Phillips para desplazar la silleta adelante o atrás.
You don’t have to be a pro player to strut your stuff on an acoustic electric git. Beginners will enjoy the medium-low action the hybrid offers, the on-board tuner (on some guitars), and the convenience of not having to remain static on stage due to the limitations of a mic. With all that said, it’s time for you to narrow down your options with the customized lists you’ll find below!

In the 21st century, European avant garde composers like Richard Barrett, Fausto Romitelli, Peter Ablinger, Bernhard Lang, Claude Ledoux and Karlheinz Essl have used the electric guitar (together with extended playing techniques) in solo pieces or ensemble works. Probably the most ambitious and perhaps significant work to date is Ingwe (2003–2009) by Georges Lentz (written for Australian guitarist Zane Banks), a 60-minute work for solo electric guitar, exploring that composer's existential struggles and taking the instrument into realms previously unknown in a concert music setting.

A common theme with these models is the capability to easily access the highest notes of the instrument, alongside dual humbuckers and massive sustaining bodies.  The Explorer, much like the V, is now a very common electric guitar shape in the heavy rock and metal genres, but was widely used in other styles as well.  This is evidenced by one of the most famous Gibson Explorer players, Allen Collins of Lynyrd Skynyrd.

Gibson lost the trademark for Les Paul in Finland. According to the court, “Les Paul” has become a common noun for guitars of a certain type. The lawsuit began when Gibson suedMusamaailma, which produces Tokai guitars, for trademark violation. However, several witnesses testified that the term “Les Paul” denotes character in a guitar rather than a particular guitar model. The court also found it aggravating that Gibson had used Les Paul in the plural form and that the importer of Gibson guitars had used Les Paul as a common noun. The court decision will become effective, as Gibson is not going to appeal.[48]

Though modulated delays are essentially effects, the need to balance the dry and delayed sounds as a means of regulating the effect strength means that using these devices via insert points makes them much more controllable than trying to use them in an effects send/return loop. If you do use them as a send effect, you can achieve this balance by automating the send level.

However, Class D amplifiers (also called "switching amplifiers" or confusingly, "digital amplifiers") are more efficient than conventional Class-AB amplifiers, and so are lighter in weight and smaller. The Acoustic Image Focus head, for example, produces 800 watts of power and weighs 2.2 kilograms (about 4 pounds). Class-D amplifiers use MOSFETs (Metal Oxide Semiconductor Field Effect Transistors) rather than 'ordinary' (bipolar) transistors, and generate a pulse-width modulated signal that is filtered before it reaches the speaker.[15] In the 2010s, the availability of Class D amplifiers has enabled amp manufacturers to produce very lightweight and small, yet very powerful amp heads and small, lightweight combo amps.

This set has all three of the best pianos available in a size that can be handled by most modern devices devices (PCs or recommend iPhone 8/iPad Pro). Needlessly long samples have been shortened but looping only happens at almost inaudible trailing ends of samples (many after 20s).  If you are looking for a quality set with different piano types to choose from then this is the one. This set is already included in the Nice-Keys-CompletePlus and Nice-Keys-Extreme.
Another +1 for shreddage. I have the PRS version and was trying it out through BIAS and TH3 the other day. Had an absolute ball, and was able to achieve somewhat realistic results with very little effort. I also love pretty much everything I have from Amplesound, though results through effects engines can be hit and miss. Their Taylor acoustic is lovely if that's what you're looking for. I've not found a really fantastic strum engine/option yet but then I will fully admit I haven't put the time into mastering what I already have in that department. I have heard demos using the guitar VIs that I have that do sound convincing so it is possible though maybe not easy.
What started out as Gibson’s daughter company that was tasked with producing affordable guitars, has grown into a giant. Not so long ago, Epiphone was the brand you turned to if you wanted a legit Les Paul but didn’t have the money for Gibson one.Today, things are vastly different. Gibson stepped up their game across the board, producing some of the absolute best guitar on the market.
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.

Electro String also sold amplifiers to go with their electric guitars. A Los Angeles radio manufacturer named Van Nest designed the first Electro String production-model amplifier. Shortly thereafter, design engineer Ralph Robertson further developed the amplifiers, and by the 1940s at least four different Rickenbacker models were made available. James B. Lansing of the Lansing Manufacturing Company designed the speaker in the Rickenbacker professional model. During the early 1940s, Rickenbacker amps were sometimes repaired by Leo Fender, whose repair shop evolved into the Fender Electric Instrument Manufacturing Company.

The best acoustic electric guitars solve the inconveniences of playing a traditional acoustic in a very preferable way. No longer do we need to play a guitar size and shape we don't enjoy in order to project more volume. We don't have to strum and pick harder. We don't need the nuisance of setting up and staying positioned behind a mic to be heard through the loud speakers. Today we look at how this is achieved and share our top recommendations for every budget...
We are looking at plenty of audio boom here, secured by the mahogany hollow body. The rest of the mix also includes a strong mahogany neck with an attached rosewood fingerboard, a pack of 22 frets and classic white dot markers. Audio versatility is pretty high here, and the guitar is capable of tackling everything from light jazz tones to alternative rock groove.
While there are cheaper Strats under the Squier sub brand, the Standard Stratocaster is the way to go if you want a budget friendly one with with the Fender logo. This guitar is fondly called an MIM (Made in Mexico) Strat to differentiate it from the American made version. While some elitists will tell you that the difference is noticeable, many others attest that it's hard to spot the difference in an actual blind test - making this a true to form Standard Stratocaster, only this one is not made in the USA.
Description: Guitar Type: Bass - Body: Carbon Fiber (Graphite) - Body Construction: Solid - Top Wood: Cocobolo (Nicaraguan Rosewood) - Neck Wood: Walnut & Bubinga - Neck Construction: 5 Piece - Frets: 24 - Inlay: Custom - # of Strings: 5 - Headstock: 2+3 - Bridge Construction: Carbon Fiber (Graphite) - Cutaway: Single - Hardware: Black - Pickups: Bartolini - Pickup Configuration: Dual - EQ/Preamp: 3 Band - String Instrument Finish: Stained Red, Transparent Flat Black
If the book had been proofread better, I'd give it 5 stars. For example, there are places where the text has both a fret number and standard musical notation, and the fret number is wrong. The book refers you to play along with the instructional CD backing tracks, but it doesn't tell you which track number to play. It's easy enough to figure out what was meant, but a little more care would have been better.
You’ll need to get yourself setup with an account on some of the web stores selling components such as effects pedal specialty stores listed above, and some general component stores such as Mouser and Digikey. AMZ provides a list of the components required for each project. Make sure you check carefully the component requirements such as type of capacitors. Many components may have suitable electrical values but different physical layouts, so use the datasheets for your chosen component. Measure the spaces and holes on your PCB to make sure the components will fit. Remember that you’ll also need an enclosure in which to install the finished circuit and don’t forget things such as knobs, battery holders etc.

The guitar measures 41 inches in length, and it comes with a 25.75-inch scale and 20 frets for various playing techniques. You also get strong D’Addario strings for reliable performances every time, as well as enclosed die-cast gold tuners, so you never play an off note. This dreadnought guitar features a cutaway so you can easily practice finger techniques on the higher frets.
Remember when I said that there were 2 amps widely used as practice amps and tools for guitar tech’s? Well, the Orange Micro Crush Mini Guitar Amplifier Combo is the other one. Warm ups before gigs, during set ups and maintenance work, this amplifier is relied upon to provide accurate sound and incredible tone anywhere, anytime. This is one of the best cheap amps available thanks to the fact it’s made by one of the most respected amplifier manufacturers in the world, powered via 9V battery and busts out some seriously amazing clean and dirty sounds.
Alonso de Mudarra's book Tres Libros de Música, published in Spain in 1546, contains the earliest known written pieces for a four-course guitarra. This four-course "guitar" was popular in France, Spain, and Italy. In France this instrument gained popularity among aristocrats. A considerable volume of music was published in Paris from the 1550s to the 1570s: Simon Gorlier's Le Troysième Livre... mis en tablature de Guiterne was published in 1551. In 1551 Adrian Le Roy also published his Premier Livre de Tablature de Guiterne, and in the same year he also published Briefve et facile instruction pour apprendre la tablature a bien accorder, conduire, et disposer la main sur la Guiterne. Robert Ballard, Grégoire Brayssing from Augsburg, and Guillaume Morlaye (c. 1510 – c. 1558) significantly contributed to its repertoire. Morlaye's Le Premier Livre de Chansons, Gaillardes, Pavannes, Bransles, Almandes, Fantasies – which has a four-course instrument illustrated on its title page – was published in partnership with Michel Fedenzat, and among other music, they published six books of tablature by lutenist Albert de Rippe (who was very likely Guillaume's teacher).
Nickel finish Frequensator style split trapeze tailpiece. This split fork design originated on archtop models from the 40's. The difference in fork length alters string tension behind the bridge to add depth to the bottom strings and brilliance to the top strings. Width of plate with mounting screws = 2 17/32 in. (64.3mm). Length of mounting bracket side with mounting holes = 1 39/64 in. (41mm) from end to bend Length of mounting bracket from bend to trapeze hook tops = 1 13/64 in. 30.5mm.) Length of short trapeze to top of string retainer bar (not including nut heights) = 2 1/2 in. (63.35mm). Short bracket width = 1 3/64 in. (26.65mm). String Bracket width = 1 3/16 in. (30.35mm). Length of long Trapeze section including string bracket = 6 in. (152mm). Widths of each trapeze and string bracket are equal.
Non Locking Tremolo TRÉMOLO FAT/SAT INSTALACIÓN DE LA PALANCA DEL TRÉMOLO La palanca del trémolo se puede poner y quitar muy fácilmente. Introduzca la palanca en el orificio de la placa base del trémolo. Tire hacia arriba de la palanca para extraerla. AJUSTE DE LA PALANCA DEL TRÉMOLO (SAT PRO) Para ajustar la altura de la palanca, retire la tapa de los muelles del trémolo en la parte posterior de la guitarra y, con una llave Allen de 3 mm, gire el tornillo de...
As cool as these little amps are, they only have a fraction of the features you’ll find in their larger, more powerful big brothers. But, they are more than enough for a newbie to get started on, and they meet and exceed the criteria I outlined in the beginning as what to look for in a good starter amp: They sound good, they are flexible with good overdrive, multiple channels, solid EQ sections and some even have built-in effects.
Size & Weight: If the multi-effects pedal will stay in one place at all times, then perhaps size and weight is not a big deal. However, one of the biggest selling points of a unit like this is its portability. If you need to gig with it or simply take it to a friend’s house, make sure you’re fine with its dimensions. The good thing is that a manufacturer like Line 6 makes several versions of the same basic pedal. The Line 6 M13 is a great unit, but if you need it to be more compact you can opt for the M9, or smaller yet the M5.
FU was non-stop work & fun at the 2014 NAMM Show in Anaheim California! It was great to be back in the southern California sun with 85 degrees while freezing snow and blizzards were happening back east! The fun started with an opening night party with Eddie Van Halen and the launch of several new EVH Guitar models. The rest is just a blur but here are some out-takes to enjoy, For more behind the scenes photos check out our Facebook page!
Vox's history goes back to the late '40s, where they originally built electronic keyboards. Their presence in the guitar market started in the late '50s when they launched the 15-Watt AC15 amplifier which ultimately caught the attention of many iconic artists - including The Beatles, Queen, Dire Straits, The Yardbirds, The Rolling Stones, The Kinks and many more. These artists helped spread the brand's popularity around the world, but ironically, they were not enough to make the company profitable. This resulted in the Vox brand being owned by many different companies, thankfully Korg took over in 1990 and continues to take good care of the brand up to this day. These days, Vox is still the go-to amp for chimey and jangly clean tones with an extensive line up of amplifiers, interestingly, their line up still includes modern reproductions of their popular AC15 and AC30 combos.

When it comes to guitar amps, American Musical Supply carries iconic cornerstone brands such as Fender, Marshall, Vox, and Orange. These are the names that have formed the foundation of guitar rigs worldwide for decades. We also stock the most innovative new models from such brands as Blackstar, Fuchs, Line 6, Paul Reed Smith, Supro, and a host of other incredible companies anchored by passionate engineers, technicians, and designers. With the myriad of choices available from AMS, how does one decide? All it takes are a few questions to get started.
The only known American distributor of Lyle guitars is the L.D. Heater Music Company. A small warehouse based in Beaverton, Oregon, L.D. Heater was owned by Norlin, the parent company of Gibson, and known more for their exclusive production rights to Alembic instruments. As protection from potential lawsuits, Lyle guitars were part of the contract that stated under which brand names Gibson-licensed guitars could be produced and distributed.

A boost pedal is one of the most useful pedals one can have. Simply put, it boosts the signal that goes into it. It can perk up a low output guitar, or bring out more character or a different quality to your amp. This is especially useful for solos where overdrive or distortion would overwhelm the tone you've got. Boost adds more “you” to the sound. Look out for what tone the boost adds, like treble or mids before purchasing. Some boosts claim to be transparent, maintaining the same EQ of your original tone, while others spike a certain part of your EQ intentionally.

2) Use a line-out box (I use the Suhr Iso Line Out box) between your amp and dry speaker cab to take a tap off the dry signal. Run the line-out signal into a small mixer, and run the outputs of the mixer into a stereo power amp and two guitar cabinets. As with the previous rig, use the mixer sends and returns to patch in effects—which you will set at 100 percent wet (no dry signal) and blend to taste. In this setup, you can blend the dry signal into your “wet” cabinets. For live applications, mic all three cabinets, and pan the wet cabinets hard left and right in the PA. This is the setup I use, and I was inspired to go this route by guitarists such as Steve Stevens and Eddie Van Halen. I like to blend a significant amount of dry signal into the wet cabs. In the PA, the sound is absolutely massive! I also use an expression pedal to control the amount of effects in my wet cabs, so I can tailor my delays and reverbs on the fly.

Keep in mind that the year the guitar was built is no guarantee that any individual guitar is in the optimum condition required to handle steel strings. Any Martin should be evaluated with care, and a top that lifts significantly in the bridge area or this is not firm, is a sign that lighter strings should be used. Or that the guitar is in need of attention by a qualified repair person.
A. Musical instruments, especially acoustic and electric guitars, are routinely pawned for short-term loans. Buyers prepared to pay cash can sometimes find high-quality acoustic guitars at pawn shops, but there are no guarantees on condition. Furthermore, the seller may or may not be able to provide any technical information or additional accessories.
I have had some truly “nightmare” scenarios with repair people in my time, and you must beware of these folks who love to take your money, but who can totally botch a repair job on a nice guitar! It’s happened often enough to me to make me be very careful whenever I am “trying out” a new repair shop for guitar-related problems. Due to this, I often like to start with bringing them some relatively un-complicated guitar repair problems such as fret jobs and wiring problems, but even these have sometimes turned into nightmares. Today for example, I brought of all things, 3 Lap Steels and one semi-hollow guitar for repairs, but unfortunately the store’s repair guy was not there. We had a good communication though, and they made sure I wrote down the repairs I felt were needed, with a separate sheet for each instrument, and said that he’d be calling me with any questions regarding the guitars and their repairs before tearing into them!
Part of their Espana series, the Cordoba 45MR is handsome, handmade in Spain, and brings all the character of Spanish guitar music to the player, starting with the idea of using the guitars of the 1880s and 1890s as a model for the appearance and sound. Nylon-string guitars themselves came from Spain, so this is perfect for the player who wants as much connection to tradition and authenticity as possible.

Vintage guitar amps are older guitar amplifier "heads", speaker cabinets and combo amp/speaker cabinets, which guitarists, record producers and bandleaders seek out for their unique tone. Some[which?] recording studios have a selection of the most popular vintage guitar combo amps, amp heads and speaker stacks, so that performers can get a retro sound. During the 1980s, when most guitar amps being manufactured used "solid state" semiconductor technology, many musicians seeking an older style of sound (for blues, roots rock, etc.) favored older amps that used vacuum tubes (called "valves" in the UK).[23] Popular vintage models include the Fender Showman, Bassman and Vibroverb amps, and older models made by Ampeg, Gibson, Marshall, and Vox,[24] as well as other smaller companies such as Valco, Danelectro, and Premier.

Very disappointed! This was a gift from Santa this morning and the amp failed miserably. Would not work at all. Not with a battery or an adapter(which by the way is not included). Amp started to smell like it was burning/melting even though it showed no power at all. Son is very disappointed to say the least and so is mommy. Only thing he wanted was an electric guitar and he couldn't even enjoy it this morning. How do I explain returning it to Santa...
Jump up ^ The Guitar (From The Renaissance To The Present Day) by Harvey Turnbull (Third Impression 1978) - Publisher: Batsford (ISBN 0-7134-3251-9) - p112 (Chapter 3 - The Twentieth Century) - "In Spain Falla's lead was followed by Joaquin Turina (1882–1949) and Federico Moreno Torroba (b. 1891), who began to produce works in collaboration with Segovia."
After the introduction of electronic transistors in the 60s, engineers began to emulate these new and raw vacuum tube sounds with the new technology. They often used germanium transistors, which were not only cheap, but also had a sensitivity for generating bizarre fuzz tones, a quality that became a key ground for experimentation. The first mass-produced box was the Gibson Maestro FZ-1A Fuzz-Tone, which launched in 1962, right at the birth of British rock: The Fuzz-Tone was responsible for Keith Richard’s sound in 1965’s “(I Can’t Get No) Satisfaction,” transforming it from a mild Dylan-esque acoustic record into the Stone’s signature confrontational delivery.
 Great, low priced, vintage Japanese project guitar. May be Decca, Teisco or similar. Has "P90" style, Japanese pickup installed which is not original to the guitar. Solid Mahogany body and neck with Brazilian rosewood fingerboard. Body is perfectly flat and is a thin 1.25" thick. Back of neck profile is very "flat". Top of original bridge is missing and has a wooden one laying in it's place. The pickup is wired directly to the output jack as there are no pots. 3 of the original tuning machines have had their gears changed. All work fine. The headstock logo is missing. We have no additional parts with this one, nor a case or gig bag. Guitar as photo'd only. Would make a great vintage, Japanese, project / player guitar.

In its classic form, the guitar is simply constructed, with the neck and fingerboard comprising a single piece of maple, bolted to an ash or alder body inexpensively jigged with flat surfaces on the front and back. The hardware includes two single coil pickups controlled by a three-way selector switch, and one each of volume and tone controls. The pickguard was first Bakelite, soon thereafter it was celluloid (later plastic), screwed directly onto the body with five (later eight) screws. The bridge has three adjustable saddles, with strings doubled up on each. The guitar quickly gained a following, and soon other, more established guitar companies (such as Gibson, whose Les Paul model was introduced in 1952; and later Gretsch, Rickenbacker, and others) began working on wooden solid-body production models of their own. A large chromed cover, often called the “ashtray”, was fitted over the bridge for improvedshielding, but this is rarely seen as most players find it impedes their style.

Echo and delay are created by copying the original signal in some way, then replaying it a short time later. There's no exact natural counterpart, though the strong reflections sometimes heard in valleys or tunnels appear as reasonably distinct echoes. Early echo units were based on tape loops, before analogue charge-coupled devices eliminated the need for moving parts. Today, most delay units are digital, but they often include controls to help them emulate the characteristics of the early tape units, including distortion and low-pass filtering in the delay path and pitch modulation to emulate the wow and flutter of a well-used tape transport.
Multiple stages of valve gain/clipping can be "cascaded" to produce a thicker and more complex distortion sound. In layperson's terms, a musician will plug a fuzz pedal into a tube amp that is being "cranked" to a clipping "overdriven" condition; as such, she will get the distortion from the fuzz which is then distorted further by the amp. During the 1990s, some Seattle grunge guitarists chained together as many as four fuzz pedals to create a thick "wall of sound" of distortion.

There is no right or wrong answer when choosing a guitar. Choose whichever guitar suits your style. If you are inspired by electric guitar players, you may want to follow suit. If unplugged acoustic sounds tend to be what you enjoy most, then the acoustic guitar is the right choice for you. If you’re still not sure, make a list of ten bands or artists whose styles you’d like to emulate. If the list is predominantly electric, go electric. If it’s acoustic, then go acoustic.
A second common problem we encounter is a poor mechanical connection. When inserting a cord into a jack, the click you feel is the tip of the cord seating against the metal prong on the end of the jack. With use this prong may spread outward and loose a bit of it's tension. A gentle bend of the prong may be just enough to create a solid connection, however, metal fatigue can dictate the need to replace.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: b.c. rich","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"b.c. rich","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Gibson announced a new interactive computerized Les Paul that produces more sounds, named the Dark Fire. It was released on December 15, 2007. The guitar has a computer integrated into the body and controlled by the “Master Control Knob” (MCK). The MCK allows players to change the pickups and coils, adjust each tone and tunings automatically and simultaneously, even during a song being played. Like the Robot, the Dark Fire features the ability to tune the guitar; however, in an improvement over the Robot, the player can tune it up to 500 times per battery charge, allowing the tuning pegs to adjust themselves to different tuning styles. Using the “Chameleon Tone Technology” Gibson claims this guitar will produce every imaginable guitar sound. In addition to the improved and advanced tuning features, the guitar has three types of pickups which include Burstbucker (humbucker), a P-90 single-coil and a bridge-mounted piezo acoustic, all of which contribute to organic blends of original sounds.
Tinkering with the 100+ effects and 30 amp models available using the small screen on the HD500X is not the best experience. The screen is simply too small, and we much prefer the more intuitive stompbox-like layout of the Zoom G3X. You can use up to 8 effects/amp models for a patch at the same time, but can only tweak one at a time. If you hook up your HD500X to your computer and use their software editor, it’s a game changer. The editor software lets you do everything you can on the unit, but with a much bigger (not to mention color) screen - WAY easier than editing on the relatively small, monochrome screen of the HD500X. You can do live editing on the software, drag and drop things in your signal chain (which you get a nice visual representation of), and it applies and syncs immediately. This is by far people’s preferred way to edit on the HD500X, but unfortunately it means you need your computer with you. Since editing all the effects’ parameters is not as immediate as on the Zoom G3X, you can unfortunately find yourself tweaking things to death and figuring out all the settings, rather than just playing and creating new music. As one user puts it:
Many manufacturers abbreviate the number and size of speakers in the name of their equipment. For example, a Fender bass combo amp with two 10" speakers may be called the "Fender 210". Similarly, a Fender cabinet with two 12" speakers may be called the "Fender 212". Another abbreviation that is used is to add the wattage to the name. Thus a 500 watt Yamaha combo amp with two 12" speakers may be called the "Yamaha 212-500".
Besides instrument inputs and speaker outputs (typically via 1/4" jacks), an amp may have other inputs and outputs. These can include an auxiliary input jack (sometimes with its own level control, for a drum machine), "send" and "return" jacks to create an effects loop, a “line out” jack and an extension speaker jack. Practice amps sometimes have a 1/4" headphone jack, or stereo RCA or mini jacks for connecting a CD player, portable media player or other sound source. Some guitar amps have an XLR input so that a microphone can be plugged in for singing. Guitar amps that include a mic input are in effect small, portable PA systems. Some amps, typically bass amps, have an XLR connector to provide a balanced output from the preamp section to go into a PA system or recording input.
O WOW!...I love...Fallout 4 is a great game like the rest of the fallout series but if your a fan of the series u will be kinda of down that the choices u make don't affect the outcome of the game because they made more of a story they wanted to tell but don't lose hope still a good game and they might make a sequel to new Vegas and there just might be a Multiplayer for new Vegas 2....The world is so large and the gameplay non linear (which is good and bad), I find if I walk away from the game for a while, I have to spend a lot of time figuring out where I was and where I stashed things when I come back to it later.
There are a lot of different kinds of guitars (acoustic, semi-acoustic, electric, steel etc.) but some companies make a wide variety. Here's a list. . Fender (Mine) . Ibanez (Mine too) . Epiphone (Also Gibson plus the kids version is Maestro) . Dean . Some good acoustic companies are . Alvarez (Also mine) . Crescent . You can visit the websites for these companies. Hope I could help!

Thought you'd like to know. Before Christmas, I stopped by a local music shop to buy my 12 year old granddaughter a new guitar to replace an old Beaver Creek she'd been banging on for a few years. Since I'm an old folky from the 1960s, I thought a low end Gibson or Martin would give her both good sound and some bragging rights at her school's guitar club. The shop owner was in the acoustic guitar room strumming something I had never seen before and quickly told me I should forget Martin or Gibson and get what he was playing. It was a Seagull. An equal sound for half the price, he said, so I looked it over, strummed the few chords I could remember, and bought it on the spot. Later, I was still pondering how a little Canadian guitar could be called better than a Martin or Gibson when I found your ratings post. I do believe I kept repeating "Oh my God, it's true!" over and over. And she loves the guitar, especially the smaller neck and fuller sound. Thanks for helping this old folky who always thought Martin and Gibson were names to be spoken in hushed reverence believe in something new.

This multi-effects pedal lets you setup your virtual rig with up to five effects that include various modulation, distortion, compressor, delay, reverb and other effects. They can also run alongside the Zoom G1Xon's built-in amp modeling, which lets you choose between 22 different amps. Those are a lot of features in a small unit, thankfully Zoom implemented an interface that makes tweaking and configuring easier. As expected although you are still limited by two footswitches, it comes with an expression pedal, which adds even more to its value and usability.
A lot of EBay sellers have been calling the Hagstrom solid-bodies of the time Hagstrom-Kent. They are not. If it says Hagstrom on the body, it’s a Hagstrom. If it is one of the Hagstrom guitars that was sold as a Kent, it’s a ‘Kent, made by Hagstrom’. I wonder if the sellers think they can get more for a guitar by associating the Kent name with it. I don’t see how. Perhaps the fact that there are so many Kents floating around, the sellers wanted a more familiar name to hang on the Hagstrom.
Super info. thks. Just found your site as I too, had some questions about action. I have a Martin D-28, manufacture date late 2013 and I purchased new in Feb. of 2015. It has always been humidified and kept in the case. I only really noticed the ‘high’ action when I changed to drop D tuning and I noticed amplified ‘string whip’. I estimate the height to be 4mm. I re-tuned and looked again and the action is noticeably higher than my Epiphone EJ 200 and Simon & Patrick Woodland Folk. I think, as you have said, the guitar is just getting acclimatized to it’s ‘new’ home. Play ability is still good, (although the player needs work!) but I think I will take it back to Folkways Music to have the Tech take a look. Thks. Great site, I will bookmark it!
Leaving aside guitarists whose relative fame is debatable (such as Steve Hillage or Terje Rypdal), how can you have a wannabe like John Mayer on your list, but not Dr. Brian May, Jerry Garcia or Jeff Beck? And I’d have also swapped out Tom Morello in favor of Adrian Belew. Belew was making his guitar sound like “everything but a guitar” more than a decade before anyone had heard of Morello. Adrian played with Talking Heads, Joan Armatrading, David Bowie (that’s him playing the crazy solos on DJ and Boys Keep Swinging), and King Crimson back in thee late 70’s and early 80’s. And his song Oooh Daddy at least grants him one hit wonder status, as far as “fame” goes.
Over the years, the Gibson Memphis factory has become synonymous with creating some of the most accurate recreations of timeless classics. From the ES-335, ES-345 and ES-355 to the compact magic of the ES-339, the Gibson Memphis factory has built legendary instruments that pay tribute to the vintage masterpieces of yesteryear. To up the ante, the Gibson Memphis factory is now offering Limited Edition runs, showcasing the creative talents of their phenomenal crew, while boldly moving forward into a bright future.
In fact, it’s the same hand-fabricated bobbin, Alnico II bar magnets and plain enamel mag wire that featured on the original. And with a similar construction comes a similar vintage P-90 tone, with plenty of brightness and bite. Available in both bridge and neck models, the Antiquities look the part too, with authentic-looking aged black plastic dog-ear covers.
The sound quality is pretty excellent. Relative to the Zoom, Line 6, and Boss multi-effect pedals, the distortion on the DigiTech is surprisingly nice. The reverbs are absolutely gorgeous, which is no surprise given they are Lexicon algorithms. Chorus and delay also sounds great, and the effects’ parameters are easy to set up and adjust using the row of knobs below the display. We also find the noise gate works extremely well at taming any unruly noise issues caused by dirt effects. Overall, we’re impressed at how the RP500 replicates a lot of the “classics.” A quick note on the presets - they are less than stellar, so don’t judge this pedal by them. You’ll have to play with them a little bit to arrive at better, more usable sounds.
At the end of the day, sustain is just a fancy way of saying the length of time a note will remain audible after you pluck it. Sustain is mostly dependent on how much the body and wood of your guitar can resonate sound. Typically, solid-body guitars are the go-to source of sustain, but many pedals and amps are built with the purpose of increasing the effect. Some people prefer long sustain for certain genres; others simply are too lazy to want to pluck the string again.
ESP is yet another brand that acquires a notable stance in the history of guitars. Back in the 1980s and 1990s, the company was known for producing high-quality, custom-shop instruments with incredible original designs. Even now, the trend goes on. Today, ESP guitars are among the preferred guitars for most professional musicians around the world. Particularly, the metal and hard rock players mark this brand as their favorite. is a curated collection of electric guitars chosen for their unique tone, design, and significance in electric guitar history from approximately 1950-1980. This collection approaches electric guitars from the underdog perspective. So we carry guitars built for the masses, luthiers & manufacturers who pushed the boundaries as to what was possible in terms of not only instrument quality but tone. Design also plays an important consideration in this collection. Alternative materials, innovative tuning systems, and high quality-low cost manufacturing processes are only some of the unique qualities found on instruments at

Dave Murray: select alder body with a nitrocellulose lacquer finish, flat soft V-shaped maple neck with satin back, 21 medium-jumbo frets, American Vintage hardware and ahumbucker/single-coil/humbucker configuration – DiMarzio Super Distortion DP100 (bridge), American Vintage ’57/’62 (middle), DiMarzio PAF DP103 (neck) – with 3-way switching. Other features include chrome pickup bezels, synthetic bone nut and aged white plastic parts with black switch tip. Available in Black only and as a Japanese “Tribute” version with an original Floyd Rose locking vibrato system, dual DiMarzio Super Distortion DP100 humbucking pickups (Neck/Bridge) with a Fender Texas Special single-coil pickup (Middle), 3-way switching and an oval neck profile.
Guild is the most underrated American premium guitar brand. Almost as good as a Martin & way better than most Gibsons, Guilds are typified by clear, crisp, even tone. While lacking the full bass & tinkly top end of a Martin, the evenness of tone is a selling point for many artists, along with the clarity. The maple models are especially bright & brassy in tone, making Guild a popular brand among rock stars in the 70s, their heydey, when some of the finest American guitars came out of their West Waverly Rhode Island plant. Top-end Guild acoustics are graced with an ebony fretboard more typically found on jazz models, slightly curved and beautifully inlaid with abalone fret markers. The Guild jumbo 12-string has been an especially prized instrument, and was for many years considered the best mass produced American 12 string available.
Launch price: $799 / £826 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Pau ferro (rosewood reviewed) | Frets: 21 | Pickups: American Vintage '58 Single-Coil Tele, American Vintage '52 Single-Coil Tele | Controls: Volume (with S-1 Switch), tone | Hardware: 3-saddle American Vintage strings-through-body bridge | Left-handed: No | Finish: Faded Sonic Blue, 3-Color Sunburst
CHEVALET HARDTAIL Pour remplacer les cordes, faites passer les nouvelles cordes à travers les passe-cordes qui se trouvent au dos de la guitare et faites-les ressortir par-dessus les pontets. L'intonation peut être réglée en déplaçant le pontet vers l'avant ou vers l'arrière, en utilisant un tournevis cruciforme (+) pour ajuster la vis de réglage de l'intonation, située à...

We’ll talk more about the sound quality shortly. To give you a gentle introduction, Line 6 has been in the amp and effects modeling game for a long time. Their POD line of guitar effects processors has been around for a while, and you might be familiar with their Pocket POD. Some of you might also know them for their extremely popular digital delay pedal and looper, the DL4 (an absolute mainstay on pedalboards everywhere). Line 6 makes several multi-effects units, and according to the research we did the POD HD500X (from their POD HD X series) is the one mentioned and recommended most often. They make a rack-mountable version of it, but we’re more interested in the floor pedal unit. This is a multi-effects pedal, amp simulator, incorporates an expression pedal, tuner and looper, and doubles as a USB audio interface, just to name the basics.
On this clip you can hear more things. First of all, the size is defined by the separate recordings of the original riff and the delayed riff, thanks to some reamping! This allowed me to spread them across the stereo field so the sound develops across the horizontal axis, rather than the depth. I was also able to adjust the delay time so that it isn't behind the beat. Finally, I decreased the feedback level and I had always control over the dry/wet balance via the volume fader of the delayed signal track. Isn't that nice? And the cherry on the cake is that with this sort of manipulation you have much more flexibility! Listen to this example:
This final trick is pretty cool for live use because these effects are very efficient, which means that you can have several tracks of 'racks' without straining your CPU. Go to the Mixer tab at File/Preferences/Project, and check 'Enable Solo on Selected Track'. Solo a track, and now all you need to do to call up a new sound is select a track, and the Solo will 'move' to that track. The change from one sound to another is instantaneous. Now it's time to amaze your audience!    
Bass distortion effects preamplify the signal until the signals' waveform "clips" and becomes distorted, giving a "growling", "fuzzy" or "buzzing" sound. Until the late 1980s, distortion effects designed specifically for electric bass' low range were not commonly available in stores, so most electric bass players who wanted a distortion effect either used the natural overdrive that is produced by setting the preamplifier gain to very high settings or used an electric guitar distortion pedal. Using the natural overdrive from an amplifier's preamplifier or a guitar distortion effect has the side effect of removing the bass' low range (low-pitched) sounds. When a low-range note is amplified to the point of "clipping", the note tends to go up an octave to its second harmonic, making deep bass notes sound "tinny".
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, listPriceRange=false, MSRPHighest=915.0, isFreeShipping=true, isUpTo=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodH82691, MSRPRange=true, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=439.2, restockStartAmount=null, listPrice=549.0, priceVisibility=1, usedCount=1, MSRPLowest=832.0, salePrice=549.0, isOnSale=false, showMSRP=true, restockCount=0}
For the typical two-figure Boss pedal price, the RC-1 gives you the stereo connection, some onboard memory and a little more recording time. However you do lose the true bypass and analog dry-thru circuit that makes the TC Electronic Ditto so attractive to guitar players. Still, for acoustic rigs, I find the Boss RC-1 to be the most ideal looper pedal option and a better value than something like the Ditto. 

As this site was founded by one of the circuit board designers from, you can be assured that all of the homework has been done for you in selecting the appropriate parts for each circuit. Many of the kits we sell are not available from any other US supplier. Currently, we only ship to the USA, however, we plan to expand to the rest of North America in the future.

So you decided to play electric guitar. Once you get a guitar and an amp, the next step is to explore effects. Effects pedals can be separated into groups based on their functions. Understanding the different pedal groups is the key to getting the best sound when chaining them together. The largest pedal group is probably overdrives and distortions, and BOSS currently makes 16 different pedals in this category. For our example pedal board, we’ll pick the ST-2 Power Stack. Another category with many choices is modulation.These are effects like flanger, phaser, chorus, tremolo, and others. Let’s use the most versatile of these—the BF-3 Flanger. Another group is ambience effects, such as delays and reverbs. We’ll use one of each: a DD-7 Digital Delay and the FRV-1 ’63 Fender Reverb. There are some pedal effects that can add notes or alter the pitch of what you’re playing. For want of a more esoteric name, we’ll call these “pitch-altering” pedals. From this category, let’s throw in a BOSS OC-3 Octave. BOSS also has a few pedals that make your instrument sound like some other instrument. The AC-3 Acoustic Simulator will do the job. Some effects change your sound with filtering. This effect type can be used in different places in the signal path, so we’ll use the GE-7 Graphic EQ. A few BOSS effects defy categorization, but are nevertheless very useful in any signal path. The most common of these is the CS-3 Compression/Sustainer. Loopers fall into this category also, so let’s add an RC-3 Loop Station to the mix. And you might want the NS-2 Noise Suppressor to kill the noise in your rig, so let’s add that in, too. What about a tuner? The TU-3 is the most popular pedal tuner in the world.

Southpaw Guitars has over 900 Left Handed Guitars and Basses In Stock at any time. At Southpaw Guitars you will find a knowledgeable friendly sales staff to provide Service, Assistance, and Guidance as you purchase your Dream Guitar. Furthermore, You will not be greeted by hold music, transferred between departments, treated discourteously, or given the sell what we have routine. We are conveniently located in Southwest Houston. 713-667-5791
I purchased this as a replacement for my acoustic guitar of 15 years. I couldn't be more pleased with the purchase. The construction is excellent without gaps or excess glue around joints. The top is solid sitka spruce which is a very attractive feature at any price point let alone $200. The aesthetics on the DG800 are simple and the design on the head stock is painted and will rub off with time. However that has no bearing on the overall fit and finish of this guitar, both of which are excellent for a <$1000 guitar.
This old Nickelback hit is made up of only four different chords, written in the Key of G. During the verses only use G – C – F to progress, while the chorus of the song will add an Am (A minor) to change things up a little bit. This is a fun song to listen to and play along with, especially since the song is set a slower tempo, especially for a rock song.
This is a really special, limited edition guitar. Gibson are well known for their premium products, and the J-200 Standard certainly lives up to that billing. What we have here is Gibson’s modern interpretation of the legendary Super Jumbo that has been around in some incarnation since 1937. It’s an enlarged, round body style for big sounds and presence.
So much has changed since our last refresh – where do we begin! First we answered some common questions that you might have. Then we reviewed our top ten chart and individual categories, and removed several older models including the Gibson Les Paul Faded T 2017, Epiphone’s G-310 SG, and the ESP MH-50. We added many others including one of the greatest guitars ever made, the Ernie Ball Music Man John Petrucci Majesty Monarchy, the premium Fender Eric Clapton Stratocaster, the Yamaha RevStar RS420 and Mark Holcomb’s signature PRS MHHB2 SE.
This is an echo effect – every time you play a note it is repeated quieter and quieter, just like an echo. You can get a variety of different delay effects, from old-school “tape” echoes which are said to sound more natural, to analogue delay pedals and more modern digital ones. Digital pedals tend to sound clearer and a little harsher than their analogue cousins, making them more suited to modern styles such as modern metal.
SolarWinds Server & Application Monitor allows you to monitor your hybrid IT applications and systems. Monitor Microsoft® Office 365 Exchange side by side on your on-premises Exchange server and other applications. Check, track, and report on O365 user/shared mailbox growth, users over quota, archived mailboxes, inactive mailboxes, mobile device, mailbox groups, and more. You can also monitor Microsoft portal access to help ensure you're meeting your SLAs.
In the early 1970s, Southland Musical Merchandise Corporation apparently acquired the Kent name and shifted manufacturing to Korea. The font for the logo changed and emphasis was placed on lower prices with a higher profit margin at the expense of quality. Most of those guitars were knock-offs of Gibson Les Pauls and ES-335s and Fender Stratocasters. I'm not watching those.
Martin makes classic guitars that have been featured in countless hit tunes. While they are best known for their top-of-the-line $2,000+ models, Martin also makes great guitars for any budget. Martin guitars always honor their tradition while continuing to strive for a better instrument. Give Martin’s new 17 Series a try if you want to see that theory in action.
There are quite a few types of guitar shapes, with the most popular one being the dreadnought. However, contrary to acoustic guitars, many acoustic-electric variants come with some form of cutaway for better access to the higher frets. This can really come in handy for a wide range of techniques so you don’t have to play with your hand over the body, which can be uncomfortable.
The fact is, the qualities of different strings can have an effect on your guitar’s resonance and tone, on the quality and responsiveness of your attack as a plectrist or finger picker, and impact your speed and other important factors. And think about your budget. Some coated strings list at nearly $20, while a good basic set of electric guitar strings can be scored for $3 to $4 on sale.

Out of all the hopped-up Caucasians who turbocharged the blues in the late Sixties, Texas albino Johnny Winter was both the whitest and the fastest. Songs like his 1969 cover of "Highway 61 Revisited" are astonishing showpieces of his lightningfast thumb-picked electric slide playing. Jimi Hendrix sought him out as a sideman, and Muddy Waters recognized his talent at first glance, becoming a friend and collaborator: "That guy up there onstage – I got to see him up close," Waters later said. "He plays eight notes to my one!"
Gretsch: Here’s another company that has been making instruments for over 100 years. Of German descent, Gretsch was established in Brooklyn in 1883 by Friedrich Gretsch. The company didn’t start making guitars until the early 1950’s when electric guitars actually became popular. With origins on banjos and mandolins, Gretsch has always been big in the country market. The endorsement by Chet Atkins has helped further cement this. Another very popular endorsee, Brian Setzer, has helped Gretsch hollowbody guitars earn a rightful place in guitar history. Like Gibson and Fender, they also produce basses, acoustics and amplifiers. Furthermore, Gretsch has a hugely successful line of drums. In 2003, Grestch set up an agreement with Fender essentially handing over the control of manufacturing and distribution. Most Grestch’s tend to be up in the pricier range. For more affordable Gretschs, look into the Electromatic series.
Kamico guitars were lower-priced versions of Kay's original guitars. They were among the first guitars to use a humbucker type pickup, predating Gibson by some few years.[citation needed] Produced along with Kay brand name guitars from 1931–1951, according to most sources. The most recognizable model is the Jumbo Jazz. Kay also made banjo's under the kamico name.
After these is the overdrive/distortion, in this case our ST-2 Power Stack. The CS-3 Compression/Sustainer (and the PW-10 V-Wah) can improve the ST-2’s sustain and tone by increasing the signal to it, so they’re placed before the ST-2. Many players use a compressor just for this reason, and the “fixed wah” sound, which is a wah pedal turned on but not continuously swept, is very common in rock and metal lead tones.
In a way, the Ovation story (to use Robert Frost’s famous metaphor) is one of roads not taken. Of course, as the philosopher, Hegel, so neatly noted long ago, the paths tend to join up again, and the resulting synthesis works out fine in the end. It certainly worked that way for Charlie Kaman, whose choice of paths ultimately led to the synthesis (in more ways than one!) of Ovation guitars.
Guitar effects pedals are a great way to get started with electronics. The simplest ones only require some basic skills to assemble. The few parts can be easily obtained, and the minimum of tools required can be purchased quite cheaply. Better still is the gratification from plugging it in for the first time and being able to incorporate a pedal that you made yourself into your music. With the skills you acquire, you can graduate from simple to more complex projects; maybe build an entire pedal board of your own effects. Your friends might ask you to build pedals for them too. What you learn can also be put to use with commercial pedals, as you will better understand how they work, and will be able to repair and hot rod old pedals. If you are interested in working at a repair shop, as a guitar tech, or for an electronics company in the future, your portfolio of home built pedals will be a great advertisement for your skills.
The Martin D-28 is a modern recreation of the dreadnoughts that came from Martin's "golden era", which falls between 1930 to 1940. Since vintage D-28 specimens that were built in the '30s were being sold for more than 30 grand, the company decided to give today's guitarists a chance to own one at a more reasonable price point. Carrying with it the same premium all-solid build that include a solid Sitka spruce top, solid east Indian rosewood back and sides, solid mahogany neck and solid ebony fretboard - you can expect this acoustic guitar to sound as Martin-y as possible.
Fortunately I did some research, performed some trial and error experimentation on my own semi-hollow (a very nice Epiphone Dot) and found what I consider to be the best way to wire up a hollow body guitar. You won’t need any uncommon tools or equipment – just a wrench set (or an adjustable wrench), plenty of wire, a pair of needle-nose pliers, a soldering iron, and a bit of patience. I’ve included plenty of pics to help illustrate each step.
2. You have me to help you out! I’ve sorted through a bunch of the top acoustic-electric guitars and come up with a list of what I think are five of the best acoustic-electric guitars under $1000. I’ve been playing for almost 30 years, so I know a little bit about guitars. But just in case you don’t believe me, check around for yourself. Every one of these instruments is highly rated and top quality.
In August ’68, Ovation added three more models – the Hurricane 12-string and the Typhoon I and II basses, all with chrome hardware. The K-1120 Hurricane was a Tornado with the extra strings, advertised as offering a “harpsichordian” effect. This lasted only a year and was gone by ’69. The initial Typhoon basses had slightly smaller bodies than the guitars, with stubbier, more flared horns. These lasted only a year until ’69, when the body styling changed to that of the Gibson-style guitars. The K-1140 Typhoon I bass had one Schaller pickup and a covered bridge/tailpiece assembly. The K-1240 Typhoon II was a two-pickup model with a three-way select. This was also called the Williwaw (“mountain wind”) in some Ovation literature, but it was never really called that. The Typhoon I was only available in the stubby body and was discontinued in ’69. The Typhoon II changed model number in March ’70, becoming the K-1222. This model made it until June ’72.
Three recording sessions between 1936 and 1937 produced 29 songs, including the verifiable classics “(I Believe I’ll) Dust My Broom,” “Sweet Home Chicago,’” “Walkin’ Blues,” “Love in Vain” and “Crossroad Blues.” His popularization of cut boogie patterns presaged electric Chicago blues and rock and roll, while his fretted and slide guitar licks are so timeless that they still show up in contemporary music.
ESP started life in Japan in 1975 as Electric Sound Products – a single store that provided replacements parts for guitars. These days they are a huge guitar manufacturer and a big name in heavy metal, having supplied guitars for Metallica, Megadeth, and Slayer, among others. ESP also own the subsidiary LTD, who produce low priced, entry-level versions of their guitars.
Reverb works well for acoustic guitars because it's a less intrusive effect that doesn't overtake the clean signal. Echo and delay pedals can be more difficult to tame from a feedback perspective, especially when the echoing trail gets too long. With reverb, you can have a thick effected layer with a relatively short trail behind it, especially with the HOF's short/long switch. 
Vibrato design is slightly changed and enhanced with the addition of block saddles for adding a fair amount of firmness to the tone. Likewise, they also give a precise breakpoint for the strings. Talking about pickups, pac 112v is equipped with 5-way blade pickup selector. Similarly, master tone and volume controls are also provided for the neatest output.
The phrase “guitar amplifier” in itself is almost a bit misleading. Sure, it “amplifies” your guitar — but guitar amps really do so much more. Arguably, even as much as your choice of guitar, your amplifier will have an immeasurable influence on your sound. Beyond the basics of volume, bass, midrange and treble, your amp can provide warmth or bite to your sound, or anything from a sparkling clean tone to a blazing distortion. Amplifiers are constructed utilizing different size (or even multiple) speakers and can derive their tone from tubes, transistors, or even digital modeling. They can be very basic with just one volume knob; or they can offer a variety of gain and EQ options along with built-in effects.

{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: lotus","pageName":"[gc] shop by brand: lotus","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop by brand: lotus","prop1":"[gc] shop by brand: lotus","evar51":"default: united states","prop10":"brands","prop11":"lotus","prop5":"[gc] shop by brand: lotus","prop6":"[gc] shop by brand: lotus","prop3":"[gc] shop by brand: lotus","prop4":"[gc] shop by brand: lotus","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section"}

Ask yourself this question right at the beginning. Before buying a guitar you have to make sure of the kind of style you are comfortable in- be it the jazz and blues or be it country, soul or pop. Only once you are sure of the kind of style you are in for, you should move forward to buying your new guitar. Make the wrong choice, and you will have to regret for it later on.

So just to throw this out there- I've been trying to figure out how to set up electric guitars on my own for years and could never get it remotely figured out. At about 11:30 pm last night I decided to take a garbage fret buzzing machine of a guitar and try again. Your blog is the first time I've comprehended and successfully set up a guitar!! I'd buy you a six pack if you were in the neighborhood!
The Martin F Series bit the dust in mid-’65, to be supplanted by the somewhat updated, nattier GT Series of bound archtop hollowbody electrics. The first few prototypes were dubbed the XTE Series and produced in 1965. The guitars were renamed the GT Series and swung into production in the beginning of 1966. The GT Series consisted basically of two models, the GT-70 and GT-75. These were thinlines with two f-holes, a 15th fret neck joint (actually more frets were clear of the body), bound 22-fret rosewood fingerboards, dot inlays, and new, bound, wide-flared three-and-three headstocks with a concave curve in the pointed crown.
yea, i’ve looked on a lot of websites. The way the 5-way switch is explained here helps a lot. Actually, the Dimarzio site has the closest wiring schematic that I’ve seen. I tried it and I got 2 out of the 5 positions to work. The problem is that all 3 pickups are running on both the working settings, just the bridge is more defined on the one setting and the neck is more defined on the other.

Power valves (tubes) can be overdriven in the same way that pre-amplifier valves can, but because these valves are designed to output more power, the distortion and character they add to the guitar's tone is unique. During the 1960s to early 1970s, distortion was primarily created by overdriving the power valves. Because they have become accustomed to this sound[dubious – discuss], many guitar players[who?] favour this type of distortion, and thus set their amps to maximum levels in order to drive the power section hard. Many valve-based amplifiers in common use have a push-pull output configuration in their power section, with matched pairs of tubes driving the output transformer. Power amplifier distortion is normally entirely symmetric, generating predominantly odd-order harmonics.
Birmingham’s Table Scraps add a grunge-y Midlands mud to the garage rock sound established by the likes of 13th Floor Elevators and The Cramps. Guitarist Scott sticks to a “three-pedal limit”, using a Death By Audio Fuzz War (“a versatile monster”), Echo Dream 2 and Boss DD-3 to jarring effect to create freaky, DC59’d melodic lead bursts. As Scott says: “Once you try 12-string everything else only sounds half as good.”
This fuzz sounds great! Different from a standard fuzzface or tonebender sound, and much more musical in my opinion. Not buzzy at all, very smooth. It is not one of those over-the-top fuzz sounds. It's more of a fuzzy overdrive. But really the amount and quality of the fuzz is highly dependent on the transistors. Q1 seems to effect the amount of output, and Q2 changes the character of the fuzz. I tried many combinations and ended up using 2N2222's for both (BC109's also sounded great!). One other ... full review
Harmonizers – Commonly used for vocal harmonies, these pedals can do a lot to beef up your sound. You can also use them in creative ways, like Steve Vai and Robert Fripp, who have been known to disable the main signal altogether so that their music is coming only from the pitch-shifted output. Using a modern harmonizer can be as easy as setting it to the key you’re playing in, and many even support more than one harmony at once.

Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.

ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Ressort principal Butée Bloc de vibrato Tige d'arrêt Une fois la guitare correctement accordée, réglez le ressort principal pour faire en sorte que la tige d'arrêt soit en contact avec le bloc de vibrato et la butée. Si la tige d'arrêt n'est pas en contact avec le bloc de vibrato et la butée, réglez la vis de réglage du ressort principal jusqu'à...
The Hi Flyer was a thin-bodied reverse Strat-type with a German carve around the top, almost always seen in sunburst. This was identical to the Aria 1702T. The bolt-on neck had a three-and-three castle head, plastic logo, string retainer bar, zero fret, 22-fret rosewood with large dot inlays. A white-black-white pickguard carried volume, tone and three-way. Two black-covered single-coil pickups were top-mounted, the neck slanted back like on a Mosrite, with six flat non-adjustable exposed poles in the center. An adjustable finetune bridge with round saddles sat in front of a Jazzmaster-style vibrato. The plastic logo was still in use in 1971, though gone was the string retainer, replaced by a pair of little string trees. Dots had gotten smaller by ’71, and the Hi Flyer was available in three finishes – orange sunburst (U1800), black (U1801) and white (U1802). The Hi Flyer listed for $82.50 (plus $12 for case) in ’71.
Get it tuned up and play it in the store. Some people may find this uncomfortable, being a newbie and all. If you don't want to play it, just start bending strings, up and down, using the whammy bar; think of it as 'guitar stretching'. Then see how well it stays in tune. If this guitar has no locking nuts on the head, and it still stays in tune, it's a winner. But if you have to re-tune more than a little, and almost all the strings, pass on it. You will grow frustrated by it very quickly.
Kansas guitars has been around since 1927. They made some very nice guitars. Some expensive and some inexpensive. But the real question is whom makes the guitar for Kansas? And that is non other then Cort. Yes Cort makes guitars for just about everybody and you dont even know. the big secret is cort guitars themselves are very well made but cheaper then most brands, but same or better quality then highline guitars. Cort bailed out fender and also built Fenders for many years. So in short Kansas is a well made guitar and there set neck models are awesome and run about $400 to $600. You cant get a set neck today for under $800. And if you want to see how many guitar brands have cort making there guitars do some research on Cort and you will be surprized. They have been around for ever and are the elite company in the business.
Originally the Stratocaster was offered in a 2-color sunburst finish on a solid, deeply contoured ash body, a 21-fret one-piece maple neck with black dot inlays and Kluson tuning heads. In 1956 Fender began issuing solid Stratocasters with alder bodies.[4] In 1960 the available custom colors were standardized, many of which were automobile lacquer colors from DuPont available at an additional 5% cost. The unique single-ply, 8-screw hole white pickguard held all electronic components except the recessed jack plate—facilitating easy assembly. Despite many subsequent Stratocaster models (including copies and the Superstrat), vintage Fender models are highly valued by collectors for their investment potential and players who prefer the timbre of older models.
If you've ever opened up a non-digital pedal - for example, a fuzz pedal - there's a good chance you will have seen a dizzying array of tiny components. However overwhelming this looks, however, there's probably only a relatively small number of component types present - and on boutique or older pedals, these should be even more clearly identifiable.
Pitchshifters change the pitch of the note played via a user-specified amount. The range of pitch deviation depends on the equipment used, but many pedals are capable of raising and lowering the pitch two octaves above and below the fundamental pitch. The amount of pitch deviation can be set or controlled via a foot pedal (which typically offers smooth, continuous pitch control). Typically, such function will be used with the original signal, resulting in a Harmonizer: the pitch is altered and combined with the original pitch to create two or more note harmonies. These harmonies are typically programmed in discrete integer multiples of the fundamental tone. When used with an expression pedal, it provides a smooth, abeit slightly digital, bend-like effect. Pitch shifters can also be used to electronically "detune" the instrument. Some examples are:
Gibson's first production electric guitar, marketed in 1936, was the ES-150 model ("ES" for "Electric Spanish", and "150" reflecting the $150 price of the instrument, along with matching amplifier). The ES-150 guitar featured a single-coil, hexagonally shaped "bar" pickup, which was designed by Walt Fuller. It became known as the "Charlie Christian" pickup (named for the great jazz guitarist who was among the first to perform with the ES-150 guitar). The ES-150 achieved some popularity but suffered from unequal loudness across the six strings.