Though not much is known about the production of the Hi-Flier after about 1977, it clearly came to an end — and clearly has had an impact on players in the vintage market. Used by guitarists like Cobain and Lee Ranaldo of Sonic Youth, as well as many others in a variety of bands, the Hi-Flier gained notoriety as a unique guitar with a sound as striking as its looks.
I've recently seen Mayer, the Chili Peppers, Clapton, and Neil in concert and had an amazing time at three of those shows. Mayer was just bad, I like his blues tracks but the show was not worth it. The Chili Peppers on the other hand were outstanding – but they just didn't compare to watching Clapton and Neil burn the house down. That's one of the reasons I always feel like Tom Petty gets missed out – he might not play the fastest or most intricate tunes, but damned if he hasn't written a ton of iconic songs.
Super nice guys! They were really helpful from the get go and didn't hover like a lot of shops do to try and make a sale. Found out the gentleman behind the counter was actually from back home in Ohio and we traded some stories. He then directed us to some great places to have lunch and even gave us tips on what airline to take on our next trips out. Will definitely visit again just for the atmosphere and friendliness of he staff.

Practice makes perfect. While this might be a trite statement that your teacher used to say as you rolled your eyes in annoyance it could not be closer to the truth. Practice is especially vital with music. No matter what you plan on playing or already play unless you practice you’re not going to get anywhere even with the best guitar. So we have figured out so fat that practice is vital to reaching the level you want but that is not the end of it. A good guitar is just as important. And I don’t mean a great guitar that you will have to shell out your entire savings on. No, I mean a quality guitar that will help you out in your practice rather than hinder you. (If you still have not got a guitar but plan on doing so we have an entire catalog of the best guitars under $100, best guitars under $300 and so forth). You thought that’s where we would end the list of what you need to learn how to play? Nope. You need a good amplifier. As much as this equipment is often overlooked because it seems too had to choose, it is vital for practice.  Without further ado, let’s get into some of the best guitar practice amps.
Once you’ve gotten your needs squared away, you’re still going to need to pick an amp. And even if you’re certain as to what you want, it can still be difficult to choose. But that’s where we come in: we’ve rounded up the following 10 amps we believe are the top-tier options for beginner guitarists. So skip the hassles and heckles of guitar store salesmen and choose from one of these superb starter amps.
You're headed in the right direction - don't stop! yes, the keyboardist should control vibrato directly with the fingers, not automatically with an LFO. The more you rely on the technology to play the music for you, the worse your results will be in the long run. Is your intention to emulate a guitar, or to achieve a similar kind of lead expression and sound control during playing? Because these two are very different.
Archtop-wise, the PEs apparently went into the ’62 and sometime in that year were renamed with the EP prefix, but otherwise remained the same. No detailed info on the full line is available, but the ’62 PE-8 had a bound fingerboard, small block or strip inlays, a single rounded cutaway, a rosewood pickguard, two � not one � metal-covered pickups (with one row of exposed poles along the edge), a chicken-beak selector on the upper shoulder, and four controls on the lower bout.

Terry Kath and Stevie Ray Vaughan for me over anyone on that list but Jimi. I’ve seen Page, Clapton, Billy Gibbons, Brian May, David Gilmour, Steve Howe, Eddie Van Halen, Buddy Guy, Keith Richards, Pete Townshend, Mick Ronson, Kerry Livgren, Joe Walsh, Don Felder and Carlos Santana among others. Totally subjective as is all art and I have weird taste.
After we decided on our parameters, I selected the models by scanning Amazon and the websites of music stores such as Guitar Center and Sam Ash. We didn’t test battery-powered models because they tend to put out less volume and usually deliver lower sound quality. (Plus, most beginners probably won’t be busking on the streets.) We also didn’t test some of the super-cheap, no-name amps available on Amazon, figuring that these were unlikely to produce a really good sound that would keep a beginning guitarist interested in playing. I found 24 models that fit our criteria. I then rejected any amp that had a lot of quality-control complaints in user reviews, that wasn’t available through at least a couple of online or brick-and-mortar outlets, or that the manufacturers were unable or unwilling to provide.
Three CraViolas were offered. These had a strange asymmetrical shape with a pear shape, no waist on the bass side and sharp waist (and almost cutaway taper) on the treble. Soundholes were D-shaped with fancy rosettes, with a pointed tortoise guard on the steel-stringed versions. These had slotheads with a Woody Woodpecker-like peak pointed bassward. The bridges were similar to the mustache version on the Country Western. The CRA6N Classic ($150) had a yellow spruce top and full-grained Brazilian rosewood body, no inlays or pickguard. The CRA6S Steel String ($160) was a similar steel-string with pin bridge and diamond inlays. The CRA12S 12 String ($175) was the 12-string version.
HOLLYWOOD, CALIF. (JANUARY 25, 2018)—Fender Musical Instruments Corporation (FMIC) today announced the all-new California Series acoustic guitars, celebrating the lifestyle and culture associated with the region and the brands Southern California roots. Energetic and independent, this family of guitars defies acoustic guitar conventions with a visible look and feel of Fender’s famous electric guitars – from the Stratocaster® headstocks and vibrant colors, to the distinctive Fender body shapes that mark players as visionary artists. Lively-sounding – California Series acoustic guitars capture the laid back, yet energetic California lifestyle – from the beach to the festival stage.
Harmony's market share of entry and intermediate-level instruments was it's downfall in the mid-1970s, as it found itself unable to compete with the competition from overseas (particularly Japanese) manufacturers. The higher-end American companies like Guild, Gibson and Fender struggled to some extent too, but the imports were generally aimed at student guitarists rather than professionals.
Of course, we’ve already mentioned the cool offset Jaguar shape of the body, which will turn plenty of heads whenever this budding bassist hits the stage. But with an active bass boost circuit, you also have the option to bump the sound of this way up past what’s normally afforded in a passive bass. Not to mention, the chrome hardware and the curved vintage logo print on the head really put this bass guitar over the edge visually.
Mr Swike appears to know what he is talking about, and has undertaken a body of work that is unfortunately for sale while only being 70% complete. Some of the instructions are incomplete (like showing what North polarity looks like on Stew-Macs polarity tester, but not South), and at least one (the Varistor mod) wildly inadvisable. Why not get the book done, checked out by objective professional parties, and then released as a complete reference book?
The person who made up the Top Ten list of best guitars has it all wrong! Of all the guitar companies he lists, Carvin is the only company that still uses ebony as standard material for the fretboard. This is because most other companies refuse to take the time and expense of this type of production. The others all use rosewood because it is cheap, relatively soft and can be "slammed" together quickly by machine; an indication of how they make their guitars in general! No other company who makes guitars even comes close to using the hand selected grade of wood (start to finish) that Carvin does. Take a hint from someone who knows how great guitars made step by step; if you want a guitar made from the best materials you can get, with critical operations still done by hand, order one one from Carvin, try it for ten days, if you really don't like it just return it... No questions and no hassles... Really. If you are not the type of person who cares, or are not willing to do ...more
Cool! Yes, this idea is definitely stolen from G&L!It would be cool to see a picture or schematic, but it’s probably going to be really close to this, if not identical. Meanwhile: Don’t be scared to open up your guitar — they’re build for it! Just be gentle till you learn what you’re doing. I always stand by the Maker’s Faire credo: If you don’t open it, you don’t own it. 🙂

By the turn of the century, new-metal grinders and post-grunge plodders had given loud guitars a bad reputation. Then Jack White hit the reset button. With each savage riff, he reconnected hard rock and roots music and showed that a blues-based band could escape what he calls "note-pushing Stratocaster white-blues bullshit." And he didn't let his analog leanings prevent him from ingenious use of a DigiTech Whammy pedal – the secret behind the faux-bass thunder of "Seven Nation Army" and the screaming leads of songs like "Ball and Biscuit."
Chords are the heart and soul of playing guitar. Many guitar players seldom do anything else, other than strumming chords. The chord is the basic building block of guitar music. A chord is simply a combination of two of more notes played simultaneously. Different combinations give you different chords. There are different classes of chords, such as Major Chords, Minor Chords, Triads, Suspended Chords, Diminished Chords, etc...
Paul Simon, the great wordsmith, speaks as vividly through his guitar as his lyrics. Weaned on early doo-wop and rock & roll, Simon got caught up in the folk revival during the mid-Sixties, traveling to England to study the acoustic mastery of Bert Jansch. He has continued absorbing new influences, as on "Dazzling Blue," off his most recent album, So Beautiful or So What: "All that folk fingerpicking is what I did with Simon and Garfunkel, but [here] it's on top of this rhythm with Indian musicians playing in 12/8." At 70, he's as nimble as ever.

With the PAC112V there is no harm going with the crowds. The Pacifica is a crowd-pleaser precisely because of its versatility – and so whilst it might have a very recognisable look, this electric gives you the opportunity to craft a sound that is entirely your own. The only drawback is its weight, which is not much of a drawback at all – particularly for this price.
Although the hollow bodies of these guitars create a mellow, naturally voiced tone perfect for jazz, vintage country and other styles that require warmth and clarity, they can also snarl. For proof of the latter, check out Lennon’s performances on “Revolution” and “Cold Turkey.” Too much volume or proximity to the amplifier, however, and hollow bodies can howl with feedback unintentionally. And that’s why the semi-hollow body guitar was invented.
• Ready-made sound : ELECTRIC SUNBURST offers a high-quality set of effects, amplifiers and cabinet emulation. Three distortion and four modulation effects provide the sound of classical pedals, while five amp models and a choice of ten cabinets offer an authentic guitar sound – exactly the same. Finally, a high-quality console equalizer, two compressors, tape emulation, reverb, delay and tap delay allow you to get a real guitar sound!

@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.

Once The Beatles became tied to Vox amplifiers (a deal was struck early in their recording career whereby they would be provided Vox equipment for exclusive stage use), the quest for more power began. John Lennon's first Vox was a fawn-coloured twin-speaker AC15, while George Harrison's was a fawn AC30 with a top boost unit installed in the rear panel. They were later provided with twin black-covered AC30s with the rear panel top boost units. Paul McCartney was provided with one of the first transistorised amplifiers, the infamous T60, which featured an unusual separate cabinet outfitted with a 12" and a 15" speaker. The T60 head had a tendency to overheat, and McCartney's was no exception, so he was then provided with an AC30 head which powered the T60's separate speaker cabinet.
Solid Body Guitars: For those looking for a more versatile array of tones blended with the deepest number of volume options and full-blooded sustain, the electric solid body is the right machine. The differences between various types of solid body models are vast — even between an SG, the most popular model Gibson makes, and a Les Paul, Gibson’s six-string flagship. A wide variety of tone woods, including mahogany, maple, alder, spruce, maple and, commonly for the fretboard, rosewood and baked maple, are employed. They are extremely versatile instruments and have been spotted in the hands of players as wide-ranging as Les Paul and Zakk Wylde.
For the typical two-figure Boss pedal price, the RC-1 gives you the stereo connection, some onboard memory and a little more recording time. However you do lose the true bypass and analog dry-thru circuit that makes the TC Electronic Ditto so attractive to guitar players. Still, for acoustic rigs, I find the Boss RC-1 to be the most ideal looper pedal option and a better value than something like the Ditto. 
I have a sunset hellraiser fr. I have been playing for 8yrs and it is by far the best guitar I have ever owned or even played. Next to the ltd models that I was considering the schecter had better quality, feel, and sound at almost HALF the price of the high end lts. The quality of the abalone inlays, the finish (black cherry), the original floyd, grover tuners, 24 fret rosewood board, incredible set neck (you would think its a neckthrough without checking the specs), and the coil tapping emgs is unbelievable. I could go on forever about this guitar's action, sound, feel, quality, looks... I have spent over a 1000$ on a few dif. Guitars and I will never do it again. Ex- zack wylde epi, 2 usa fenders couple mex. 1's, a gibson Linkin Park standard, ltd kh-602, and a really nice jackson dinky style(not sure model) with 3 carvin humbuckers coiltaped just to name a few. Hellraiser is better than all of them. I recommend any of the hellraiser guitars especially with coil tapping emgs.
No tricks here, the volume control allows you to adjust the output level of your signal. But, unlike your amp's gain setting, the best signal-to-noise ratio will be achieved with the pot all the way up. If you have more than one volume knob, it means each controls a pickup. Middle positions can be useful with amps that don't have too much power and distort very easily or to get a crunch sound with a fat saturation. We can also use it as an effect by turning the knob progressively and playing a chord to make it appear (or disappear).
If you do have logic of GarageBand they come with a vast sample library including lots of different guitar sounds, now combine that with melodyne and you can get some pretty convincing custom guitar parts. It's a slow process but it will sound a lot better than most straight VI's, I've done the same with brass section stuff in the past to good effect.
Finally, according to Longworth, the earliest examples of these instruments had laminated bodies made of maple, rosewood and mahogany. A second series was made with a combination of maple and rosewood. A third series was made with maple and walnut. The #1034 EM-18 shown here appears to be very early yet has maple and rosewood, so it’s not clear if materials are indicators of chronology or simply the vicissitudes of fate (or the woodshop, as the case may be).
Of all the positions GC interviews for, tech has the highest standards and is arguably more demanding in terms of hours worked and product knowledge required than store manager. The tech for the store I worked at frequently worked 60+ hours a week to keep turn-around time to a week or less and his set-ups were so good and in such high demand that the store got an exception to the chain-wide $35 set-up price to charge $50 in hopes of lightening his load/keeping his overtime down, but he still got just as much work as he did before. If you're unsure about the reputation of your local GC's tech, don't be afraid to call the other stores and ask them who the best tech in their district is, because they'll usually be pretty straight forward with you. Most GC sales people have had their instruments set up by their in-store tech at least once and if their tech isn't very good, they'll tell you who you should go to if you want good work done because it's an absolute pain in the ass dealing with a customer whose instrument wasn't set up right when the tech is gone for the day and having to deal with the tech's fuck-up.
Dirk Wacker lives in Germany and is fascinated by anything related to old Fender guitars and amps. He plays country, rockabilly, and surf music in two bands, works regularly as a session musician for a local studio, and writes for several guitar mags. He’s also a hardcore guitar and amp DIY-er who runs an extensive website——on the subject.
Extremely long delay times form a looping pedal, which allows performers to record a phrase or passage and play along with it. This allows a solo performer to record an accompaniment or ostinato passage and then, with the looping pedal playing back this passage, perform solo improvisations over the accompaniment. The guitarist creates the loop either on the spot or it is held in storage for later use (as in playback) when needed. Some examples of loops effects are:
I then surveyed Amazon, Sweetwater, Musician’s Friend, and other online musical instrument vendors to see what was available. Having found several promising models priced below $200, I decided to set this as our price ceiling. By setting a $200 ceiling, we’re not saying that more-expensive models aren’t worth paying extra for—only that the models we recommend here are more than adequate to get a beginner off to a great start.
What started as a simple string and pedal sales catalog has grown exponentially over the past thirty years. The early days were a time where catalogs didn't have much of a presence in the industry, but what began as a college dorm room operation grew rapidly. In 1986 we moved to a full product offering and 64-page catalog, which over the years has grown to 162 pages. Join the AMS family and get your free catalog now!
The body of a classical guitar is a resonating chamber that projects the vibrations of the body through a sound hole, allowing the acoustic guitar to be heard without amplification. The sound hole is normally a single round hole in the top of the guitar (under the strings), though some have different placement, shapes, or numbers of holes. How much air an instrument can move determines its maximum volume.
Steel-string Acoustic Guitar The steel-string acoustic guitar is a modern form of guitar that descends from the classical guitar, but is strung with steel strings for a brighter, louder sound. The most common shape is the dreadnought (originally developed by C.F. Martin & Company), which incorporates a deep soundbox and a smaller and less pronounced upper bout, giving it a wedge-shaped appearance. Other popular body styles include the larger jumbo body shape, as well as the smaller auditorium (000) body style and even smaller grand concert (00) body style. Check out the Martin Ed Sheeran X Signature Acoustic Electric for a smaller body type with a punchy sound.
I started to learn how to play guitar about 1.5- 2 years ago. My instruments are on the cheap/ lower cost side. I am disabled with a long life expectancy. I wanted a hobby that I can/ learn to do for the long run. I have five different guitars now ( all on the lower cost side ), They all sound good to my ear. One of them a Squire strat sounded horrible when I purchased it. I pretty much over a little time change just about everything but the wood. The Squire is a very light electric guitar as compared to my Epiphone Les Paul ( which actually strains my disabled spine ). So, It has to sound good to your own ear, and as equally important you have to be able to hold it for a period of time while playing to get the full enjoyment of the skill known as a "guitar player". Enjoy and be Proud. God Bless.
The easiest way to record bass is to just plug it straight into the console/interface—of course, using the correct instrument-level input or dedicated DI box, and not a standard line input. This will provide a nice, clean, deep tone, but it will likely lack the growl and grit that’s often desired—for that, you’ll want the sound of an amp. While you can always use a bass amp sim plug-in later, in the mix (see below), there’s nothing like the pants-flapping wall of low-end sound coming out of a real bass amp, if one is available. But most engineers will record both—a DI’d signal, and a miked-up amp. They can be combined later on, for the best of both worlds—the clean, round, depth from the DI, with the edge and midrange punch of the amp (but see below, for a caveat).

Another acoustic guitar. This one sounds nice for fingerpicking arrangements and in general has a steadier sound than the Ibanez. If I had to choose just one of the guitars it would be this one. This one has a much rounder and fuller sound than the Ibanez. Both guitars go well together as they have different sounds to each other. This sound font also has the same presets as the one above.
The stompswitches take a couple stomps to cut on. There also some tape residue around the led lights where someone covered them. But its not a huge issue for reverb considering that the way I play, I always have a little reverb on to add texture and presence to my tone. Also, if you have a pedal switch looper that you can run all your pedals through it can stay always on that way too. But I'm going set the bidding price lower just because they don't work 100% properly and the tape residue. Other than the issue with the stompswitches the effect works great. Just clarify, you have to stomp on the switch 2 or 3 times and it cuts on.

For my tastes, position 1 on a clean tone can be a bit too boomy. Even if one backs the volume a bit to take the edge off, it doesn't quite suit acoustic-style strumming. Position 2 is perfect for these sorts of things, though. I'd always use it for the small high chords you often find in funk and reggae. Position 2 is also a nice way thinning a distorted tone without it cleaning up too much, like Position 1 with the volume dialled down does. If you have your rig set so Position 1 screams, Position 2 will sing.
From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.
The Epiphone Company is a musical instrument company which was founded in the year 1873. Epiphone is specialized in making Guitars and are one of the largest producers of guitars in the world. Epiphone has several ranges to choose from, as they brand them in different groups. Few of the Epiphone ranges of guitars are, Epiphone Sheraton, Epiphone Casino, Epiphone Texan and The Dot etc. Besides guitars Epiphone also manufactured upright basses, banjos and other forms of stringed instruments.
: I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.
Your guitar is a model H1213 Archtone made in 1963. Harmony did a great job of stamping model numbers and dates of manufacture on their guitars, but they often require some decoding. The F-63-HB is the date code and the two numbers, not surprisingly, indicate 1963. The “F” preceding the year was often thought to be a fall production indicator while the other letter stamp they would use was an “S,” which researchers thought stood for a spring production instrument. However, a former Harmony employee notified a Harmony database website that it is more likely an “F” stands for “first” and “S” stands for “second.” He explained that Harmony would shut the factory down for two weeks in July and that guitars produced before this break were stamped “F,” while guitars produced after were stamped “S.” The H1213 is the model number as indicated in Harmony’s catalogs and literature. The “3714” is the serial number of your guitar, but little information has been uncovered as to what this series of numbers represents. More than likely, it was a consecutive production number of that particular model for either the first or second half of the year.
Large speaker cabinets such as 8x10" enclosures may have wheels and a "towel bar" and dolly wheels to facilitate transportation. Speaker cabinets with 1/4 input jacks typically have two parallel jacks, so that the amp head may be plugged into one cabinet, and then a second cabinet can be "daisy chained" by connecting it to the first cabinet. Cabinets with horn-loaded tweeters often have an attenuator knob for controlling the tweeter. Some 2000s-era speaker cabinets may have Speakon jacks; these jacks are often used with high-wattage amps, because they are safer, as the cable connections are hidden inside the connector and thus it is impossible for the user to touch the metal contacts when plugging in the amp cable.

Since 1996, ESP’s subsidiary LTD has been creating quality guitars at very affordable prices. The EC-256, for example, is a great guitar if you’re looking to spend around $400. With extra-jumbo frets and a thin-U neck, this guitar is super comfortable to play. These guitars are known for their reliability and excellent build quality. And with a lightweight body, they make for great gigging guitars.
Anytime a single coil-sized humbucker is split, a tiny coil is the one seeing the strings, so the volume is going to drop. You can split to the other coil, or set the switch to wire the pickup in parallel, which will keep it hum cancelling. However, splitting to the other coil in a neck position Cool Rails probably won’t be a big difference in sound since the coils are pretty close together and pretty small.
The Effect: When it comes to effects pedals, those which offer more than one type of effect are usually seen as the best cost effective solution out there. Although many still prefer that standard, standalone configuration, multi-effects pedals have a lot to offer. Take Carl Martin Multi Effects Pedal as an example. This thing is packed to the brim with boutique level effects. Easy to use, a board such as this one can substitute a whole pedalboard depending on the variety of effects you use. One of the other great features of this design is the fact that multi-effect pedals come in both digital and analog form. They have transcended that artificial sounding performance that plagued effects processors some 10 years ago. Today, a multi-effects pedal is every bit as capable as its standalone counterparts. While this design is aimed at everyone, budget oriented users stand to gain the most from it.

I think it's fair to say that we all have a pretty good idea of what reverb is, though there are several ways of emulating it in the studio. Early reverb chambers, plates and springs have now given way to digital solutions, which fall into two main camps: synthetic and convolution. Synthetic reverbs take an algorithmic approach, setting up multiple delays, filters and feedback paths to create a dense reverberation effect similar to what you might hear in a large room. Though these often sound a bit 'larger than life', they've been used on so many hit records that we now tend to accept their sound as being the 'correct' one for pop music production. Most can approximate the sound of rooms, halls, plates and chambers, but in comparison with a real reverberant environment, the early reflections often seem to be too pronounced. The advantage of a synthetic reverb is that the designer can give the user plenty of controls for altering the apparent room size, brightness, decay time and so on.
There’s always a temptation not to spend too much money on your first guitar in case you change your mind and stop playing. However, budget guitars can be more difficult to play and you’ll begin to think it’s all too hard, when a better instrument will be easier and encouraging. Cheap guitars can have a high “action” (the distance between the string and the fret board) which makes pressing the string down tough work for novice players. The frets can be poorly set, meaning the strings rattle and buzz. The timber used is just standard factory sheeting. It all adds up to a cheap guitar. At the same time, I have to admit that in the crazy lottery of mass production and manufacturing, sometimes you’ll find a good guitar has been built. Go figure…
What if you could get a wide variety of sounds from your acoustic guitar, including complex effects and virtual (MIDI) instruments, without having to use an external amp? That would certainly be a game-changer, as it could essentially turn your guitar into an all new instrument, and by adding to your available 'soundscapes' without needing to be tethered to a plug, it could also convert acoustic performances into rockin' ones.

If you are trying to find the best electric guitar for beginners but you lack the time to do the necessary research in order to find a quality product, this short introduction should help you out. After reading plenty of electric guitar reviews and after comparing top-notch products, we have reached the conclusion that Epiphone Les Paul STANDARD is the model that you should have in mind. This device has a beautiful mahogany body and a maple top that is said to deliver an easy to distinguish classic tone. As a plus, the model comes outfitted with Alnico Classic humbucker pickups that secure a subtle and warm tone. If the Epiphone Les Paul STANDARD is out of stock, we recommend that you check out the Epiphone Les Paul STANDARD Electric as it is a reliable alternative that you might equally enjoy.
The first recording of an electric guitar was by jazz guitarist George Barnes who recorded two songs in Chicago on March 1st, 1938: Sweetheart Land and It's a Low-Down Dirty Shame. Many historians incorrectly attribute the first recording to Eddie Durham, but his recording with the Kansas City Five was not until 15 days later. Durham introduced the instrument to a young Charlie Christian, who made the instrument famous in his brief life and is generally known as the first electric guitarist and a major influence on jazz guitarists for decades thereafter.
Promotion lasts for 1 year from date of purchase. After that period, your voucher is redeemable for the amount you paid, less any value you may have received. Not valid as payment for Eat24 purchases. Not valid with other vouchers, certificates, or offers. Only 1 voucher(s) can be purchased and redeemed per person. Cannot be purchased as a gift. Subject to the General Terms. Learn more View more
The 50-watt version is driven by seven 12AX7 preamp tubes with two 6L6s powering the amp, which is surprisingly huge in output – capable of filling an auditorium no problem (depending on your cab, of course). Other features that make this such a popular choice among gigging guitarists include three customizable channels and a four-button footswitch.
It's the neat switching that makes this very classic-looking Tele act a little differently. All the standard Tele pickup selections - bridge, bridge and middle (in parallel) and neck - are in place, but it's a four-way switch, as opposed to the standard three-way; the additional selection provides us with both pickups in series for a bigger, louder and more humbucker-like 'secret' sound. The volume control has the S1 push switch in the top of the control knob: pushed down, the parallel and series-combined pickup selections are out-of- phase, giving three additional sounds over the standard Tele. The Baja sticks relatively close, of course, to the classic 60s Tele recipe. The rosewood 'board and alder body just seem to give that lovely smoothness to the high end that will make it less ear-wearing, especially if you're swapping over from an older-style humbucking Gibson. The standard mix is typically classic, wider than a Strat's but still nicely textured; the neck pickup here sounds a little fuller than some older readers or vintage Fender electric guitar owners will remember.

The benefits of owning a combo amp and one or more powered speakers is that a bassist can bring just the combo amp to recording sessions or small venue gigs, but bring the combo amp and the additional powered speaker(s) to large venue shows to add more stage volume. Another benefit of having a combo amp and additional powered speakers is that the bassist could leave the additional powered speakers in the rehearsal space (or, if playing as a house band for a club, on the venue's stage), and only carry the combo amp back and forth from her home to rehearsals or shows, saving time and energy.
This is because sound in an acoustic is dependent upon the bridge, saddle, and soundboard’s (top) ability to transfer string vibration through the sound hole of the body. The top (soundboard), back, and sides makes the body of the guitar where the sound hole is designed and cut. Knowing this, you’ll not only need wood that’s strong, but wood that can offer unique acoustic properties that emphasize its ability to project differing sounds at various frequencies. Of course, your choice of strings also lends to the harmonic ranges of a guitar.
My mom just gave me a Norma FG12 acoustic guitar my father bought for her back in the day. It is in the original box and i honestly doubt it ever made it out of the box! It appears in pristine condition but I know absolutely nothing about guitars. I really don't care to learn how to play it. I would like to sell it but have absolutely no idea how much it is worth nor know the best place to try to sell (?ebay perhaps) Any suggestions/thoughts would be most appreciated. Thanks!
In addition to modern versions of tricones and single cone resonators, National Resophonic also produce Dobro-style guitars. This company made the Model D during the latter part of the 2000s. Production of the Model D guitar has now ceased, but a few dealers in the UK and USA have stock available. National Resophonic are now producing their Smith & Young `Spider Cone’ models and the Model 11 is built on traditional Dobro lines. Also, Goldtone, Paul Beard and a number of custom builders are producing good guitars.
One important thing about caring for a guitar is keeping the wood supple and moist, and quite often, you have to purchase a separate humidifier block with any guitar. Not this guitar, though. The Cordoba C12 comes with its own humidifier block right in the case. You just have to make sure you keep it moist every week. It is now ranked first on the best classical guitar list.

If you are a beginner, you may have heard of electro-acoustic models. In the future you may want to consider one of these, as they will allow you to plug into an amplifier and project your sound across a room, concert hall or stadium (well, you have to dream big!). However, for now it’s wise to stick with a solely acoustic model, which will be cheaper and less complicated to use.
Loved this guitar a lot😘, been going back and forth to our nearest guitar center and to he honest with you, I tried the Taylor gs mini, MartIn Black electric acoustic, Breedlove electric acoustc, but man, when I tried and started playing this awesome Ibanez AW54CEOPN, I was blown away!!! The sound was loud and cleat the tone was awesome, the color was fantastic! For the price of $299.00 was very cheap for the quality and sound that this guitar can offer👍🏽👍🏽👍🏽
Gibson gave this guitar a comfortable V neck profile, which together with shorter 24.75" scale length and 1.725" nut width make this guitar one of the easiest instruments to play in this list. My only complaint with this guitar is its bank breaking price, but this steep price point and exclusivity play an important role in making this iconic instrument more appealing. Start saving now if you want to be one of the privileged few who can play this guitar.
In 2007, Gibson announced the idea to create a computerized Les Paul, dubbed the “Robot Guitar” which was released on December 7, 2007. The guitar has a computer integrated into the body with a “master control” knob next to the volume knobs, which can be pulled out, turned, or pressed to issue different commands to the guitar. One of the more notable features is the ability to tune the guitar to standard tuning simply by pulling out on the master control knob and strumming the guitar, while the tuning pegs adjust themselves to standard tuning. Another use of the master control knob is to be able to tune the guitar to alternative tunings, such as drop D, by pressing on the control knob to fit the setting. The new Les Paul has a new custom silverburst blue finish.[30] While the product was advertised in the American popular press as a “world’s first”, similar systems, some external, have been in use for decades.

I've been coming in since they opened, and it's been crazy cool to watch this little corner shop grow into a major Seattle contender. That's really saying something, as there are some really incredible locally-owned guitar shops in the Greater Seattle Area. As has been mentioned, the service is the selling point. The entire staff are very, very cool people who are perfectly happy to talk shop without trying to push you on a sale. There's a lot of regulars, and combined with the student roster, it definitely has it's own little built in community. Their selection these days is insane, especially since they target a lot of awesome smaller brands that NOBODY else in the area carries. I'm pretty sure this is the only place in town you can go to play the Reverend line, not to mention damn near every PRS model currently in production. The locally-made boutique stuff they stock is awesome too, and I would have never even known about it had it not been for the shop. Kyle, the tech, is an expert. The other guys all do good work as well. This is my go-to shop for basically everything guitar-shop related. And I'm very picky.
Although fairly small in size, this packs a serious punch thanks to the overdrive control which can produce that classic orange crunch to smooth and creamy British distortion. The Orange Crush 12 is definitely a great small gig and rehearsal amp, but it also makes a fantastic amplifier for practice at home thanks to the headphone/line output which features the Orange CabSim technology. This allows you to plug your headphones in and enjoy a faithfully emulated sound of a mic’d Orange 4×12" cabinet directly to your headphones – ideal for silent practice. This can also be used in conjunction with your audio interface for direct recording and the capturing of authentic Orange tones without dragging a massive cabinet into a room (or destroying your windows!).
Every guitarist seeks to produce an expressive and distinctive tone. Unfortunately, figuring out what kind of gear you need can be a baffling proposition. Here are the three main equipment categories that comprise your music-making rig: your electric guitar, guitar amps, and effects pedals and units. These components all work together to create your sound. And because you can swap out equipment and change settings, the creative possibilities are virtually limitless.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: hohner","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"hohner","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
The McCarty Model - named after Theodore 'Ted' McCarty, Gibson's president during its 1950s to 1960s heyday and, much later, 'mentor' to Paul Reed Smith - originally appeared in the early 1990s and was the company's first attempt at a more vintage-informed guitar. It takes its name, primarily, from its scale length of 24.594 inches. However, the focus of the 594 is not just that scale length but a desire to recreate, as closely as possible, the 'holy grail' of vintage Gibson tone - a 1959 Sunburst, but in a modern double-cut guitar. A change comes with the pickups, which are PRS's latest date-series 58/15 humbuckers but with an 'LT' (Low Turns) suffix, which on a meter shows the bridge unit to have a lower DC resistance than the standard McCarty's 58/15, although the neck pickup seems virtually identical. The four-control layout (the first PRS double-cut guitar to use it) possesses the classic LP setup and feels immediately comfortable to any player used to the much-copied Gibson layout.  Full humbucking, or with the partial coil splits engaged, full volume, half volume, tones rolled off - not to mention the shades with both pickups on - there's not a duff sound that we can find. Dynamic, expressive - it purrs, it roars, it's one of the best electric guitars.

Taylors have a "happier" sound and I like the feel of them. I am a novice but from what I have seen for a beginner with an acoustic guitar, they felt and sounded warmer and less tinny than the laminated wood ones. A good rosewood taylor isn't on the cheap side of things but it feels like you can play better than you can. And the model I looked at had strings that were nice and close to the frets so you didn't feel like you were pushing in deep like the keys of an old typerwriter. Go into a Guitar Center or somewhere you can actually feel what you are getting before you buy anything. I got a cheap Gibson online less than a month ago and got what I paid for when it came with the bridge completely missing and a brassy sound when it was played. Buy your stuff in person. I think that Gibson is probably still a good brand, but the quality control of the cheaper models they put their name on is something I might question from my first experience with them...
Why We Liked It - As with Gibson’s other premium products, this is not a cheap electric acoustic, but you do get exactly what you pay for. One of the very best and most legendary acoustics with an electric edge. It’s going to be the guitar of choice for real enthusiasts and of course touring professionals who will settle for nothing less than the best. If you are on a budget, try one of these cheaper electric guitars.

Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials; for example, a guitar may have a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft-grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.