The entry point for guitar pedal self-assembly is the effects pedal kit. A lot of the work such as designing and manufacturing the circuit board, drilling the enclosure, and selecting suitable parts has already been done for you. With a little care and careful following of the instructions, there’s no reason not to have a first time success with a pedal kit.
Fender once again has proved itself to be a great name in the guitar industry by introducing this super acoustic model. It’s a full-size guitar and is IDEAL FOR BEGINNERS to start their musical journey as guitarists with it. It’s designed for learners so you must not expect too much from it, but yet, it is capable of producing great sounds in the hands of an advanced player that’s why claimed to be best suited for all styles of music.
The Effie was also joined by the Coily U1825 guitar and U1835 bass. These were essentially the same except the Coily guitar had a Bigsby-style vibrato, roller bridge with flip-up mute, and a pair of chrome-covered screw-and-staple humbuckers, typical of early-’70s Arias. The Coily bass had similar four-pole screw-and-staple pickups and a fancy trapeze tail with a diamond design on it. These were available in orange sunburst, red and jade green. The guitar cost $122.50, the bass $135.
Guitar Tricks is available 24/7, anytime and anywhere I want to use it. It is browser based and I can get to it from any computer, even when I am away on vacations.  There are different video resolutions that can help with adjusting to a slower internet connection or to watch the lesson on the go on a mobile phone. There is also an iPad app available for free, and no need for additional in-app purchases, that gives access to the core features of Guitar Tricks.
Amp Modeling: A multi-effects pedal does not necessarily guarantee that it also includes amp modeling. Amp modeling basically means that, in addition to effects like reverb, delay, chorus, fuzz, distortion, compression, et al. it also has the ability to sound like - or model - various tube and solid-state guitar or bass amplifiers. Amps have a tremendous impact on tone, which is why brands like Marshall, Vox, Fender, Matchless, Mesa Boogie, and many others have cult followings. Copying the true character of an amp in the digital world is admittedly a tall order, and one that multi-effects pedals are not great at; even the best ones struggle. Still, they do a decent-enough job, and you should decide if you want your multi-effects pedal to include amp modeling.
Some guitars have a fixed bridge (3.4). Others have a spring-loaded hinged bridge called a vibrato bar, tremolo bar, or whammy bar, which lets players bend notes or chords up or down in pitch or perform a vibrato embellishment. A plastic pickguard on some guitars protects the body from scratches or covers the control cavity, which holds most of the wiring. The degree to which the choice of woods and other materials in the solid-guitar body (3) affects the sonic character of the amplified signal is disputed. Many believe it is highly significant, while others think the difference between woods is subtle. In acoustic and archtop guitars, wood choices more clearly affect tone.
Since digital effects use DSP, manufacturers have made the most of the processing power by adding amp modeling features. To the point that amp modeling has become a standard feature, and has even overtaken effects in popularity. If you already have a good amplifier, then amp modeling is not important, but it's still a good addition for the extra versatility amp modeling provides.

The Effect:Distortion is one of the most popular and desired guitar pedal effects, especially among rock, hard-rock and metal players, The Kinks, Jimmy Hendrix, Metallica, to name a few. Prior to the introduction of effect pedals on the market, Distortion was mostly achieved by forcing an overwhelming amount of electricity passing through a guitar amp’s valves. Nowadays this is no longer necessary. Arguably one of the most famous and newbie friendly option and at the same time prime example for a distortion pedal is the classic Electro-Harmonix SOULFOOD.
All of the hardware is gold on this model, and while it’s stock Epiphone stuff rather than licensed equipment, it’s of good quality, and we don’t expect it to be difficult to keep in tune. The eSonic preamp and NanoFlex pickup system are both excellent and really help the guitar to come alive. In terms of looks, there are no particularly notable features, but the combo of gold hardware and florentine cutaway make for an attractive design.
It is a German company that manufactures bass guitars. Making a really good bass guitar is a difficult task. However, Warwick bass guitars have really mastered this daunting task. The growl of the bass, and its hollow and beautiful resonating tone is a striking feature of the bass. The company employs stringent quality control methods in wood seasoning, cutting, and resonance engineering. It is highly regarded among bassists and has attracted many notable artists like Robert Trujillo (Metallica) and Adam Clayton (U2). One of the greatest things about Warwick is that they manufacture guitars for everyone, from amateur hobbyists to professional players. If you are new into electric bass guitars, then Rockbass Corvette Basic and Streamer Standard Electric Bass guitars are great options for a rocking start.
ATTACHING AND DRILLING THE NECK For this you will want to use a clamp to hold the neck firmly in place while you dril the holes. Attach the neck to the body and clamp it lightly so you can set it in the right possition before drilling. Make sure you have some protection between the clamp and the body so you don't leave any indentions in the wood. A soft piece of plastic or a soft rag will work nicely. Use a long ruler to allign the neck to the position of the bridge. Do this on both sides of the neck to see that you get it centered. Tighten down the clamp a bit more until the neck doesn't move. Drill the holes as straight as possible with a smaller bit that you used on the body. If you can't reach all of the spots that you need to drill at because the clamp is in the way, take a couple of the furreles and neck screws and screw them into the neck. Once you have done this you can finish drilling the other holes with out the clamp.

SOLD OUT: Super condition its been kept in the case over 25 years WoW!... JVG just set-up and plays wonderfully no buzz no drag its EASY to play now and it has NO WEAR almost like owning NEW Vintage! Sounds good ! its loud and robust TONE this is a great deal on an absolutely wonderful guitar. This was well crafted in Korea in the late 1980's same as Japan spec incredible. Lots of vintage guitar for a great price Its woods are as follows... Top is Spruce nice straight grained and may be solid cant see a seam it is what it is as made, the back and sides are all a fine instrument grade mahogany as is the neck a medium slim profile neck feels great , the headstock has the rosewood overlay with Fender logo in mother of pearl with gloss finish to front headstock as the body is gloss front - sides and back and the back of neck smartly in satin finish to not show finger prints easily.. Fit and finish is rated JVG at very good - excellent vintage easily Near Mint rating I'm still looking for a dink and cant find one yet, but thats not to say there may be something minute somewhere but I looked it over good and she qualifies for near mint rating vintage and is WAY BETTER than average. The fingerboard I believe is ebonized rosewood and shows no divots at all... same with frets I polished them pre set up and I can attest they are excellent too... Neck angle and action is very good straight and as a result the action is set to within Martin spec and plays excellently with no buzzing. Original tuners on board and are good quality and do the job well, intonation on this guitar is good so it sounds sweet up or down the fingerboard... surprisingly great tone for a guitar anywhere near this price point, You will be very pleased. Comes with its original semi hard chipboard case black good all latches and handle are good, Here is a great sounding and playing Vintage Korean guitar that will be sure to please. Questions ? asl Joe jvguitars@gmail.com .
Tonhöhe ebenfalls gehoben und kann auf die gewünschte Tonlage eingestellt werden. Der Ibanez DOWNSHIFTER erlaubt es, die Tonlage einer Saite durch einfache Hebelbetätigung auf eine vorgegebene gewünschte Position zu senken. Um präzises Tuning für sowohl Auf- und Ab-Positionen zu erzielen, müssen Sie beide Hebeleinstellungen vor Betätigung des Downshifters voreinstellen.
The advantage of this specific package is that you’ve got everything you need to get started right away: guitar (duh), amp, strings, tuner, guitar cable, picks, gig bag, strap, and instructional DVD. Those of you who just wanna get a guitar and start, this is your choice. Squier also makes similar package, but I recommend this over the Squier because the parts (electronics) are higher quality, although the Yamaha costs a little bit extra.
The color black is powerful, mysterious and evokes a sense of potential and possibility. It’s widely regarded as the single most popular color for Rock ‘n’ Roll thanks to rock pioneers such as KISS and AC/DC. Get back in black with these fine offerings from Dean with our vivid take on the classic black electric guitar with a few other shades thrown in for good measure. Plug in and play. Get your wings!
Once you've mastered the intricacies of single-transducer miking, it's fun to start working in stereo. For true stereo recording, you need a matched mic pair as well as a twin-speaker amplifier, preferably one with built-in stereo chorus and vibrato (such as a vintage Magnatone or a Roland Jazz Chorus). Two separate amplifiers fed by the same stereo delay or multi-effects unit will also work.
Very nice. I'd love to hear it. 12 strings seem to emphasize the difference among guitars, the 335-12, the Firebird 12, etc. I like the sound of the Rick, but playability is an issue, you might go through three or four before one feels right, then they are so easy to pull out of tune. But you've got a totally unique variety one of a kind variety there.
Some types of wood that were commonly used in the 1950s are close to extinct today, and can no longer be used for mass production. For instance, import and usage are restricted for certain types of Mahogany, Rosewood, and Ebony, and large guitar manufacturers in the US have been raided by the justice department on suspicion of using illegal materials.
The key elements of mic positioning are distance from the source and orientation to it. Moving the mic closer to the amp provides more definition, increased highs and lows, and less room sound. As you pull the mic back, the sound becomes less detailed, more "midrangey," and more blended with the ambience. Depending on the room you're in, a distant-miked amp may gain a natural presence and unique character in the mix, despite an apparent decrease in definition. On the other hand, placing the mic too far back will result in a washed-out, murky, or hard-to-control tone.
Filters are also great for use on drum loops. One trick I like is to send the drums to a modulated resonant filter set up as a send effect, with a narrow band-pass EQ beforehand. This creates a rather bizarre metallic melody that accompanies your drums. It can get fatiguing if over-used, but brought in at a low level in some sections of a song, it can create plenty of interest, particularly if followed by a modulated delay. Matt Houghton
The EB-18 was a bass version with a 33.825″ scale. According to Longworth, early versions had a single DiMarzio “One” pickup and Grover Titan tuners, while later basses had a DiMarzio “G” pickup and Schaller pickups. Expect to find various combinations of those. Longworth also mentions the possibility that some might have Mighty Mite pickups, but this is uncertain. EB-18 production began in ’79 and about 5,226 (about 1,300 a year) were made until the guitar ended in early 1982.
I am very pleased with my new guitar, it is perfect... beautifully crafted, comfortable, just perfect for me...Rosewood and spruce and dynamic design ...wow; top of the line case, and the price was substantially less than full price, less than 50%!. There was absolutely nothing wrong with its packaging, as the description indicated. I was a bit nervous thinking it was going to arrive banged up, scratch or damaged, but the box was in good condition and the case was impecable. I got it two days after ordering it, and played it the next day at a school concert. Next will take it to a luthier to get it set, get better strings and an amp. Totally souped! Thanks Amazon for my musical gift for the holidays!
The main reason this exists is because some players prefer to drive their amplifier's preamp with high gain to achieve distortion instead of using an emulation through a pedal. This means that you can't push modulation and time-based effects into the preamp since distortion will come after them. Again, you can do this but it will sound horrible because it breaks our four main rules above. Nobody wants a muddy, smeared, and washed out tone, and thus the effects loop exists.
Many players use more than one effect – in this case, they place them next to each other on the floor, joining the output of one pedal to the input of the next using a small guitar lead called a “patch lead”. This allows them to use more than one effect at a time and toggle and combine them as they wish. Most players with multiple effects pedals attach them to a board, imaginatively called a… “pedal board”. This makes the pedals easier to transport and carry around. They set up and plug together all the pedals on the board, so when the user gets to a gig they can just plug in and play without having to set everything up again.
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.[14] Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.

The Fender Mustang I V2 Guitar Amplifier Combo also features USB connectivity allowing you to hook it up to your computer or DAW software for easy recording. If you don’t already have a DAW, you can utilise the free downloads of Fender FUSE and Ableton Live software suites to create your own music and take advantage of all the great features within the amplifier when recording. An intuitive, easy to use control panel allows you to see and change your sounds and footswitch connectivity (sold separately) ensures you can have complete control without the need for a pedalboard. A fantastic amplifier for beginners and players of all levels.
The Thunderbird IV was first introduced in 1963 and instantly became one of rock's most recognizable bass guitar designs. For almost five decades, the Thunderbird has powered artists as varied as Nikki Sixx, The Who, Kings of Leon, Cheap Trick, Lynyrd Skynyrd, Steely Dan and The Silversun Pickups. Turn on your radio and you'll hear a Thunderbird bass. Now, Epiphone takes all the vintage mojo of the original Thunderbird IV and sends it flying into the future with Gibson TB Plus humbuckers with ceramic magnets and all the 'Bird's original styling and features intact.

Edit: After reading everyone's comments I've decided to let the technician give my strat a first time setup and I'll try to absorb any information I can in order to be able to do it myself one day. I realize many of you have some pretty cool guitar shops that'll do a free setup so I'll try to negotiate something. I'll be sure to record the condition of the guitar itself before the setup in case the technician chips it or scratches it. I'll also check out Dan Erlewine's books like the guitarist below suggested. Thank you all for your advice, I really do appreciate it and I hope to be as wise as you all are when it comes to guitars someday.
Each option has a unique tonal quality, some may not seem all that useful in some situations.  2 adjacent pickups that are out of phase, can sound very tinny and weak but often cut through better in the mix as they occupy a different placement in the spectrum.  Consider Brian May's (Queen) tone as some of his selections rely on 2 single coil pickups being out of phase
Delay/echo effects can sound pretty good when plugged directly into an amp’s input (See Example 3, above)—hell, the Edge built a whole career out of doing just that—but if you want absolutely clean, pristine delay and echo effects with no distortion, the effects loop is the only way to go. Reverb effects should always be patched into the effects loop (See Example 4, below) unless you always play through the cleanest of clean sounding amps. Overdriven or distorted reverb just ain’t very pretty, and it can destroy any semblance of clarity or definition and smear your sound like the ketchup on a baby’s face when it’s trying to master the fine art of eating a messy pile of French fries.
Though he was influenced by everyone from B.B. King to Muddy Waters to Chuck Berry and Bob Dylan, Hendrix’s complete artistic vision included elements of blues, funk, rock, psychedelia and utter chaos. His frequent use of effects like the wah and Octavia pedal, pioneering studio effects like “backward” guitar and flanging, and use of controlled feedback and the tremolo bar added another dimension to his music.
I have a Kona Signature Acoustic with beautiful inlays in the wood. I believe the body is mahogany, decent resonant tone, and once I shimmed up the saddle bridge (which technically should have been replaced all together due to notching), sounds better than my Martin in many ways, where it better distributes the low, high, and mid-range tones. The Martin is too bassy sounding, but have ordered new bone bridge saddle, which hope it improves the cheap plastic one it came with...
We started finding that this type of construction leads to the neck bending (or bowing) after about 6 months. Unfortunately with the traditional method there is not an easy way to adjust it back to normal - once it is bent it's time to get a new guitar! This lead us to re design our classical guitars to use a truss rod. A truss rod is a much stronger example of the bar used in traditional manufacturing, but its main advantage is that it is adjustable. So if in the future you neck begins to bend it can easily be adjusted back into correct shape.

If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.
Here, the brighter/lower-value cap is engaged when the pot’s all the way up. As you roll it back, the larger cap is introduced, producing greater capacitance and a deeper treble cut. When you arrange caps in parallel, their total capacitance is the sum of their values. For example, I tried a .0047µF cap and a .047µF, so the minimum value is .0047µF (a very modest cut) and the maximum is approximately .052µF (a very dark tone).
A well-reviewed electric guitar with a high-quality design, the ESP LTD EC-1000 is the best electric guitar for the musician looking to upgrade their sound and achieve an exaggerated tone associated with the world of rock-and-roll. Both the body and neck of the guitar are made from mahogany with a rosewood fretboard, making this guitar lightweight in feel and balanced in design. The 24 frets come in an extra-large size for ease and comfort in chord changes, while the tailpiece and locking bridge make tuning  both easy to achieve and maintain. Output of the sound is well controlled with the toggle switch, and the model comes with two volume controls for different modes of play. Designed for the musicians with years of experience and a desire to play with a harder edge to their sound, the ESP LTD EC-1000 offers high-end features for a reasonable price. We’re huge fans of their entire EC series.
The top of the guitar has the greatest impact on the tone quality of the instrument. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. As discussed below under Tonewoods, the wood used for the top strongly influences the tonal characteristics of the guitar. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. That is why, as mentioned above, the larger the soundboard, the larger the sound.

I remember choosing a floating tremolo equipped electric guitar as my first ever purchase, and I ended up being so frustrated at how hard it is to keep the guitar in tune and how complex string replacements were. To make the long story short, I felt relief when I traded it up for a simpler Fender Strat. These days, floating tremolos have gotten better and easier to setup, but I'd still recommend a guitar with basic stop tail piece or tremolo bridge for beginners - just so you can focus on learning the instrument and worrying about string setup when you have more experience.


Amazing guitars, specially the Custom Series full solids. You can choose from variety of tonewoods and soundboard combination and 4 different shapes. Offering almost every player's preference. You can also choose options such as soundport off-the-rack. Great craftsmanship, amazing tone, and superb playabality at an amazing price. Great guitar, and definitely not an OEM brand. They only make their own guitars.
You can get a rough idea of what the All-Electric looked like in Gruhn/Carter’s Electric Guitars (Miller Freeman Books, 1995), although this example has been refinished and replated, with a new fingerboard, tuners and added tailpiece, and is an atypical 14-fret Spanish model, possibly assembled at the end of the ’30s from leftover parts. Toward the end of National Dobro’s presence in Los Angeles, a great many guitars were assembled and shipped from remaining stock, often as exports.
The transparent overdrive is the most natural sounding overdrive. Unlike the most commonly used multi-processing type overdrives, the transparent overdrive does not alter the tone of the input signal. The transparent overdrive's output signal will sound exactly the same to that of the input signal tone wise, just with added drive and boosted signal (dependent on the users settings). Which means there is no tone loss for more natural sounding drive. The transparent overdrive is typically priced higher due to it having nothing but the purest of sound and smooth drive.
The free GUITAR RIG 5 PLAYER is ready to rock right from the start: It offers a supreme selection of modular, high-class components, effects and routing tools, bundled as the free FACTORY SELECTION. For classic power and gain the Tube Compressor and Skreamer really come into their own, while a range of high-end effects such as the Studio Reverb and Delay Man can add that special touch. Choose from many Amp and Envelope modifiers as well as Routing Tools to further shape your sound to perfection.
Dude, John Mayer? unbelievable. Angus young, Gary moore I agree Eric Clapton you bet. but, it is an opinion. I think Michael Schenker is badass, and what about Steve Morse. I just saw Rush in Rio, and I forgot just how good Alex lifeson is. What about George Lynch? Tony MacAlpine. so I will let you have John Mayer, because he makes you feel something, for me, it's nausea…..Oh, and I forgot Brian May. Doyle Bramhall, I could go on.
Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All of our kits have a build difficulty rating to help you determine which kit is right for you.
The Firebird did have some other unique features such as its banjo style tuners and mini humbuckers that produced a different sound than the full humbucker pickups Gibson typically offered.  Many notable players preferred the Firebird: Mick Taylor from the Rolling Stones used it on the album Exile on Main St.  Allen Collins would also use this axe on stage with Skynyrd alongside his Explorers.  The great Texan blues guitarist Johnny Winter was known for playing slide on his 1963 Firebird to great effect.  Dave Grohl, of Nirvana and Foo Fighters fame, used his white Firebird to create a modern rock sound.

Three recording sessions between 1936 and 1937 produced 29 songs, including the verifiable classics “(I Believe I’ll) Dust My Broom,” “Sweet Home Chicago,’” “Walkin’ Blues,” “Love in Vain” and “Crossroad Blues.” His popularization of cut boogie patterns presaged electric Chicago blues and rock and roll, while his fretted and slide guitar licks are so timeless that they still show up in contemporary music.

Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.
Gibson guitar are among the best in the world, but they can also be a little expensive. You can go with an Epiphone, but Gibson always has a few good options under the $1,000 mark as well. If you love the idea of owning a Gibson Les Paul but you’re struggling with the cash part of it, check out the Les Paul Faded. A little while back I grabbed the 2016 version and it’s been a fantastic guitar with the tone and feel of a Les Paul, minus the big price tag.
Most players don’t use more than one modulation effect at once, so it doesn’t matter all that much if you place the phaser before the chorus or the flanger in front of the phaser. However, the one exception is tremolo, which should be placed behind other modulation pedals, as this placement will produce the most dramatic and desirable rhythmic on/off effects. Placing a tremolo pedal in an effects loop is also closer to the signal path of an amp with built-in tremolo, but my personal preference is to plug a tremolo pedal into an amp’s front end and save the effects loop for other effects.
{"id": "113469598", "categoryId":"site5AAG", "name":"Vintage 1960s K300 Solid Body Electric Guitar", "pageUrl":"/Used/Old-Kraftsman/Vintage-1960s-K300-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/1960s-K300-Solid-Body-Electric-Guitar/000000113469598-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"539.99", "priceMin":"539.99", "priceMax":"539.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"60.00", "priceSavingsMaxPercent":"6,000", "inventory":"1", "brand":"Old Kraftsman", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"234720911023", "priceVisibility": "", "itemType": "Vintage"}
Every decision, action, employee hiring, design of new models, etc.-comes from the C.E.O.-Henry J. He dictates every single decision that happens within the company. His power and control over the company is unimaginable. Nothing will change until he leaves or sells the company. First of all the C.E.O. hires every worker- (which is why you wait an eternity to get hired). He doesn't delegate hiring to other departments like other "normal" companies do. That is why you apply, take tons of tests, wait 3 to 5 months (not weeks!), take a drug screen test, if you pass that, then you are finally hired- for a factory job- not a job at the White house! Managers demean workers- most managers don't even have a high school level of education- while most of the workers have some college experience or a 4 yr. degree (including me). Why do the young (20 to 40 yrs. old) educated guys take the job? (1st)- it looks good on the resume, (2nd)- you get to work on guitars, which seems cool at first, until you realize it's a place you do not want to be -most guys leave after a year on average. There is no chance for advancement or a raise. The attitude from Mngt. is intimidation- to rule by fear. They actually get a thrill from firing people, they actually want you to fail, I have never seen anything like it. Everything is about hitting your daily numbers at any cost. Pay raises have been non-existent for years without explanation of why. H.R. is the worst I have ever seen. The women in H.R. dress extremely inappropriate and unprofessional. When you go to H.R. to ask questions, they literally sigh and roll their eyes like you are bothering them -instead of them actually doing their jobs. Nobody knows anything-when you ask for help, you get annoyed responses because they just want to hit their personal number to get out and go home. Managers do as little as possible to not get noticed, but do just enough to keep their jobs- while the workers do all the work to make them look good. Turnover is constant. Stress levels are off the charts. 2012 was my 1st yr. of 2 yrs. working there. We were doing from 650 to 800 guitars a day- (Massman Dr. plant). In comparison the Custom Shop makes about 50 a day. The Memphis Plant- 50 a day. The Montana plant- 50 a day- us =650 to 800 a day! We made the most guitars in 2012 ever -but for the first time nobody received a yearly bonus?!? Which makes no sense -until you figure out everything is about cutting costs-all ordered from the C.E.O. People will skip all their breaks and even lunch to hit their number to get out on time. Countless times we had no lacquer because Mngt. hadn't ordered on time?!? We would have no parts for the guitars (bridges, tuners, etc.)-because they forgot to order on time?!? Yet no one from Mngt. would take accountability for it. One day, 5 people in my dept. (20-30 in the whole plant overall) were fired with no warning (one lady had been there 18 yrs., one guy-8 yrs., etc.)-yet Gibson's attendance policy in their own handbook states you have to be given a oral warning, then a 1st written warning, then a 2nd written warning- yet all the workers were not given any warning. And the reason why is that it had been a slow Christmas season in sales, so they were all let go (ordered by Henry J. -the dictator) to cut payroll-but didn't follow their very own attendance policy-because they don't have to. There is no union, no protection for your job. They tell you you are fired, and to just deal with it, while the powers-that-be don't have to be accountable for anything. It is a dictatorship. A guy I worked there with has been there 20 yrs. And one day he counted up all the workers he remembered being fired or had quit in the 20 yrs. he had been there - it was 350 to 400! If you fail a drug test, you can keep your job?!? So you take 2 weeks off and go to drug rehab- but if you break the attendance policy - you are gone?!?- It's because the company doesn't have to pay you for 2 weeks, and it's something of a tax write off as well (that's what I was told). So basically you can break the law and do drugs- and still have a job. All in the name of saving money. The back break room refrigerator has not been cleaned in 2 yrs! No clock in the main break room for over 5 yrs. and counting! Gibson charged their own employees and their children to attend the company's (workers!) halloween party!?!? Gibson owns Tobias basses-made them 2 yrs. then stopped. Owns Slingerland drums, but hasn't made them in over 12 yrs (pics of them on the website are from late 1990's)! Baldwin pianos (makes on a on-order basis only, and only in Japan, not America anymore). Valley Arts guitars-stopped making them in 2002-12 yrs. ago. Etc,etc.etc! The point being is they buy up all these brand names- and have them on their website as if they are still being sold - but they are not! But they don't say that on their website. The C.E.O. has them to just build value for the Gibson/Epiphone name - to make it more valuable- to sell the company one day at maximum profit. I know this because managers told me this who had first hand knowledge. Guys have been punched in the face during arguments. One guy took a screwdriver and smashed it through the top of a hollow body guitar out of frustration! Arguments are a daily occurrence. My friend would come into work to start his shift, and be so nervous, he would throw up in the bathroom- because of the stress levels and negative atmosphere. Every day literally felt like you were going to prison! I really wanted to make this job work out for me. I am a musician (as are many who work there, many of us play gigs on weekends or nights). My long-term plan was to use my degree, and move up to a corporate position-until I found out what a nightmare the company is. I found out through everyone that I asked that corporate is run the same way! Many might be surprised by this review, because Gibson guitars are really revered by musicians. And outwardly the company has a reputation of the highest quality. But working there was the exact opposite, you would almost rather dig ditches! I have pretty much done it all- I owned my own business, waited tables, worked out in the heat-landscaping, worked in sales, marketing, management, etc. And I have never had such a negative work experience- ever! It affected my health mentally and physically (standing everyday for 10 hrs. or more). And let me tell you for those of you reading this -no job is worth that!
An octave pedal listens to what note you’re playing and adds the next octave up or down (depending on your settings) making it sound like someone is playing the octave note with you. If you’re familiar with guitar or just learning, you’ll know that an octave is the distance between one musical note and it’s corresponding note at a higher or lower pitch. For example, if you play an open E string and then play the E string on the 12th fret, it will sound the same, just an octave higher.

When Bob Dylan described the Band's "wild mercury sound," he was really talking about Robbie Robertson's guitar, as exemplified by his torrid, squawking solo on "Just Like Tom Thumb's Blues" from their 1966 tour. But by the time the Band were making their own LPs, Robertson had pared down his approach, evolving into a consummate ensemble player. "I wanted to go in the opposite direction," said Robertson, "to do things that were so tasteful and discreet and subtle, like Curtis Mayfield and Steve Cropper… where it was all about the song."
A lot of amateur guitar players are tempted by the ‘cut’ of a high treble sound that gives their notes definition above the cacophony of the rest of the band. They become so accustomed to this sound that they lose sensitivity to its harshness. Treble becomes the ultimate weapon in their arsenal for the volume war, but to the listener, all they hear is a headache, aka bad tone.
IK Multimedia are good friends of ours and we’ve watched them grow from a small plugin company to a world-beating manufacturer of amazing widgets for getting sound in and out of your iPhone or iPad. Amplitube Custom Shop is the software you need to buy their premium plugins. However, it comes with a load of amazing stuff out-of-the-box, including 9 stomp box emulations, 4 amps, 5 cabs and more.
Buddy Holly was one of the pioneers of the Stratocaster and used the instrument on virtually all of his songs with the Crickets. During the recording of “Peggy Sue”, rhythm guitarist Niki Sullivan was not needed for the song, and instead stood next to Holly, and flipped the selector switch of Holly’s guitar from the neck pickup to the bridge pickup for the guitar solo.
4.  Cracked end block because customer used a drill bit meant for steel to enlarge hole for the jack used on an acoustic.  Fix:  This can be tricky.  First you have to assess the damage and that can be challenging.  Some of these miniature cameras work great.  I’ve had success using a point and shoot on a timer to take a snap.  If the crack is small you might be able to use cyano to repair it.  If the end block is cracked all the way through, the back may need to come off and the block replaced… Again, not something you’re going to do on a cheap guitar.   The proper way is to use a step reamer to get the correct sized hole.

Power chords are one of the staples of rock music and one of the most important guitar chord types you need to have in your toolbox. They are important to learn for a few reasons: They’re easy to play They’re used a TON in many popular songs and are very versatile. They’ll help broaden your repertoire of guitar sounds / styles. This post will walk you through step-by-step what a power chord is, how to play them and what songs you can learn to start practicing them. What are Power Chords? Whether you play an acoustic or electric guitar, you are going
You can knock the price down of the S670 down with the S520, which is from the same series as the S670, but without the middle Quantum Alnico pickup (Alnico simply refers to the type of magnet material used - it’s fancy way to say “stock” pickups). Otherwise this guitar is tough to distinguish from most of the S670. You get the same Edge Zero tremolo system and locking tuners, along with a similarly thin body and neck design.
If you’re a player performing live or in a studio, all of this is just the opening pre-credits sequence to your signal then being captured via a microphone, which then sends current through another cable to a mixing board, which then has its own preamplification, equalization and filtering, which either goes to the power amplifiers of a public address system or to some kind of recording device, which then involves…aw, I’m getting tired, and I think we’re getting the point: how can anyone call *any* of this “natural”? Does *any* of this occur in nature? Does any of this sound like we’re carving a flute from driftwood or clapping a couple empty coconut shells together?
Located in Kobe, Japan, this manufacturer made the famous Maya brand guitar. Maya guitars were in production from 1970-1980. It's been suggested that Maya may have been responsible for the Aztec badge. You'll notice that Maya has been attributed to a company known as Tahara. At this point I do not know if Maya assisted in production or if Tahara produced some Maya guitars as a subcontractor. Maya and El Maya badges have also been attributed to Chushin Gakki. More research is needed to clarify this point.
This package features an iconic electric guitar—The Les Paul— paired with a great little practice amplifier, the Electar-10, and quality accessories. The Epiphone Les Paul Special II is a versatile guitar that feels comfortable covering most any major style, including rock, blues, punk, classic rock and more. The guitar features a dual humbucker pickup configuration. The package also includes a tuner (very important), guitar picks and free online lessons to get you playing right away. A cable, strap and gig bag complete the package.
Players who wish to self-appraise their own instruments have a number of options for finding a guitar blue book online. A number of websites that perform the same function as Kelley Blue Book for cars exist for guitars. You may just be interested in knowing how much your prized ax is worth, or you may be looking to buy. Either way, the internet can help you determine the fair-market value of nearly any guitar.
In my opinion, I don't think this guitar is quite worthy of all of the rave reviews here, based on the thin sound. I bought this because my Zager needs to go in for new frets and I have to wait until May to get it worked on, and wanted to get something inexpensive to use in the meantime. This is a beautiful instrument, no doubt. The finish is stunning, it's very nicely made and ready to play out of the box, so on that level I would give it 5 stars. But soundwise, for me I'd say 2 and half stars. The bottom end is nowhere to be found. I tried to switch to the same strings I am using on my other guitar and it's no different. This guitar has about the same dimensions as my Zager, but nowhere near the same bass response. It'll do fine as
As the ’60s dawned, electric guitars began to increase in popularity again, and many distributors turned to Europe for suppliers. The Italian makers were the most successful, with EKO, imported by LoDuca Brothers, in Milwaukee, leading the pack. German makers were paced by Framus, which was imported by Philadelphia Music Company, located in suburban Limerick, Pennsylvania. The Scandinavian contingent was represented by Levin, Landola and Hagstrom, the latter picked up by Merson.
Three CraViolas were offered. These had a strange asymmetrical shape with a pear shape, no waist on the bass side and sharp waist (and almost cutaway taper) on the treble. Soundholes were D-shaped with fancy rosettes, with a pointed tortoise guard on the steel-stringed versions. These had slotheads with a Woody Woodpecker-like peak pointed bassward. The bridges were similar to the mustache version on the Country Western. The CRA6N Classic ($150) had a yellow spruce top and full-grained Brazilian rosewood body, no inlays or pickguard. The CRA6S Steel String ($160) was a similar steel-string with pin bridge and diamond inlays. The CRA12S 12 String ($175) was the 12-string version.

It also includes a -6dB/oct low-pass filter that’s built into the plugin’s tube/valve modeling equation, and can imitate a lower-quality tube triode.  There’s a switchable output saturation stage, which can be used to overdrive the output signal and all the standard Voxengo plugin features, such as full multi-channel operation, channel routing and built-in oversampling. It’s great for guitars and for dirtying up sounds such as vocals, drums or synths.


Their 200-series is reasonably priced, and a great value for a Taylor guitar. They also make the Baby and Big Baby, and the GS Mini—smaller-bodied guitars perfect for intermediate players and beginners with a few extra bucks in their pockets.These are awesome acoustic guitars with a big sound. They might be small, but veteran guitar players love them for the tone and portability.
I have a Martin, 3 Taylors and a heap of other good stuff inc. a Luna Vista Bear - I chose my particular one because of the beautifully matching selection of woods used. At first just OK sound (but I did get it for the visuals! ) but after a proper setup and a few tweaks plus a set of John Pearse strings it sounds and plays pretty darn good. I'm more than happy with it, and for the price a very nice guitar now. Not up to Taylor/Martin levels of course, but it has its own sound - and when plugged in it has a really great well balanced sound. Recommended!

This is a great opportunity to start working with a digital multimeter (DMM). Track down an inexpensive DMM and make sure it has a continuity function, preferably with an audible connection indicator. You can then trace how switches work by connecting the individual lugs to your DMM and seeing which are connected, and then switching to the other position and taking the same measurement again. The beep that sounds when you’ve made a connection is a great help when you’re taking these measurements.
{"product":{"id":"113884849","stock":"instock","price":"219.99","name":"Thunderbird IV Electric Bass Guitar","download":false,"sku_id":"113884849","checksum":"117352072023","rep_id":"site5113884849","displayId":"113884849","sku_display_id":"113884849","sku_rep_id":"site5113884849","gc_pro":false},"category":"Electric Bass","pageName":"product_detail","subcategory":"4 String Electric Bass","dept":"Bass"}
A friend lent me this banjo and I got it working and sampled it. Its a 5 string closed back banjo. The fifth string being tuned to a high "g" note (half the length of the neck). Its this string and the closed back that helps give you the bluegrass sound (the high string ringing the "g" note throughout each of the chords with syncopated fingerpicking patterns). This has a standard mapping with variations of long release (to hear the whole sample) and reverb.
Many music purists prefer analog effects. Since they don’t use digital conversion, the signal (purists argue) is less prone to loss, and is more pure as a result. It’s true that digital conversion can cause some natural artifacts of the original sound to become lost, and can sound more “processed.” However, as digital technology has evolved, this has become less of a consideration. Digital effects have the advantage of versatility and precision. Today’s multi-effects processors only exist because of digital processing; many effects can be achieved in a single unit through sheer processing power. Digital signals can also be used to control a wider range of parameters.
SOLD OUT: is a faithful D-28 design copy by Takamine Japan , discontinued production decades ago its Beautiful its near mint What more do I need to say besides this one will go quickly! Just in to be processed and pictured it's all original and in TOP condition! Contact Joe to buy this beauty at: jvguitars@gmail.com Pics soon to come do not hesitate your going to love this guitar.
GNUitar is a basic free guitar effects software that allows you to turn your PC into a guitar effects processor without having to spend a single dime. Nothing much needs to be said aside from it is working as intended. Although you don't have too many options, it has all the essential effect types including distortion, reverb, echo, delay, chorus, flanger, equalizer, wah, phaser, tremolo, vibrato and noise reduction. The package comes with 2 different types of distortion and has various flavors of echo, reverb and delay. This free software works for both Windows and Linux.
Echo (also sometimes called long delay) is a natural effect as well, but it is only encountered in large open spaces such as canyons or stadiums. It sounds like when you emit a loud, sharp yelp and a second later you hear the yelp come bouncing faintly back to you from a far wall. This is a particularly fun effect to play around with by yourself. If you set the delay of the echo long enough, you can play against the notes you just played and harmonize with yourself while the rate sets up a kind of beat.
Rhythmically I can make Shreddage II sound as authentic as a mock up can get for that instrument (which means, mostly authentic)...through conscientious (more like anal-retentive) programming and manual round robins. But of course it's always a much better idea in this case to just do the mock up and eventually get an actual guitar player yourself to record. It's extremely hard to get that edgy lead thing going, bent up and held vibrato notes.
Thanks for the list. Michael Gurian was a luthier in NYC who began as a classical guitar maker then began making steel string instuments in the 1960’s , I remember seeing his instruments shortly after i bought My first Martin in the dog years of the 70’s along wi Don Gallaghers instruments. Recently acquired one of his jumbos in Brazilian rosewood made in 1971 still in remarkable condition. He was among the first to compete as luthier with the big boys at Martin and gibson , even before Bob taylor jumped in.
Not many classical guitar concertos were written through the guitar history. Nevertheless, some guitar concertos are nowadays wide known and popular, especially Joaquín Rodrigo's Concierto de Aranjuez (with the famous theme from 2nd movement) and Fantasía para un gentilhombre. Composers, who also wrote famous guitar concertos are: Antonio Vivaldi (originally for mandolin or lute), Mauro Giuliani, Heitor Villa-Lobos, Mario Castelnuovo-Tedesco, Manuel Ponce, Leo Brouwer, Lennox Berkeley... Nowadays, more and more contemporary composers decide to write a guitar concerto.

4-conductor humbuckers are fun to wire because they offer many combinations to play with. Some pickups have another bare wire which is there for shielding and should always be grounded. Manufacturers have their own color code, so make sure you find the right color code before connecting anything. Below is color code diagram for common pickup manufacturers.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=248.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodJ40301, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=131.12, restockStartAmount=null, listPrice=149.0, priceVisibility=1, usedCount=1, salePrice=149.0, isOnSale=false, showMSRP=true, restockCount=0}
The history of Electric Guitars is summarized by Guitar World magazine, and the earliest electric guitar on their top 10 list is the Ro-Pat-In Electro A-25 "Frying Pan" (1932) described as 'The first-fully functioning solid-body electric guitar to be manufactured and sold'.[31] The most recent electric guitar on this list is the Ibanez Jem (1987) which featured '24 frets', 'an impossibly thin neck' and was 'designed to be the ultimate shredder machine'. Numerous other important electric guitars are on the list including Gibson ES-150 (1936), Fender Telecaster (1951), Gibson Les Paul (1952), Gretsch 6128 Duo Jet (1953), Fender Stratocaster (1954), Rickenbacker 360/12 (1964), Van Halen Frankenstein (1975), Paul Reed Smith Custom (1985) many of these guitars were 'successors' to earlier designs.[31] Electric Guitar designs eventually became culturally important and visually iconic, with various model companies selling miniature model versions[32][33] of particularly famous electric guitars, for example the Gibson SG used by Angus Young from the group AC/DC.
Excellent information. There is so much more to discuss on this topic. I built an Explorer shaped guitar with Strat hardware and humbucking pickups. I love the dive bombing note bends and the fat sound of humbucking pickups. I used Koa for the body and the neck came from a '70's Hagstrom electric. REALLY, thin neck. Read about guitars. See what artists like to play and why. Then fit it to your needs / wants. Brian May's Red Special uses wiring techniques I never heard or thought of. And he and his Dad made that guitar. Les Paul invented the guitar with the same name. Read about him and what he wanted. The ideas are out there to expand on. My Les Paul has 2 volume controls and a common Bass and Treble control. Different way of thinking. And it works for me.
Early proponents of the electric guitar on record include Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Eddie Durham, Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra), Tampa Red, Memphis Minnie, and Arthur Crudup. According to jazz historian James Lincoln Collier, Floyd Smith can be credited as the first person to rig up an amplified guitar. According to Collier, "Floyd's Guitar Blues" may be the first important use of the electric guitar on record.[17]
×