No reference materials are available to me for this early Unicord period of Univox amplifiers, but there was undoubtedly a line. These American-made amps featured tubes and use high-end Jensen speakers. The Univox logo was on the upper right corner of the grille on a large piece of plastic. The cabinet was covered in charcoal-flecked tolex with white beading, with a grey grillcloth. Front-mounted controls included two inputs, volume, tone, tremolo with speed and intensity, plus footswitch jack with footswitch. The jewel light on these early Univox amps was a little red square.
Strumming Patterns: Rhythmic strumming patterns are rarely coupled with delay.Chords: In some cases, swelling chords that are strummed once can work well with a delay effect, but generally this is avoided in favor of a less-saturating effect, perhaps a kind of light modulation.Short Arpeggios: A five to 10 note arpeggio is the perfect spot to dial in a smooth delay to help fill in the sound.Quick Solos: Speedier solos can work with delay and make sense, but the faster you’re playing, the harder it is to get delay to sound clean and not muddy.
My purpose for the visits were neither to buy, nor to have repaired, an instrument. It was to have the proprietor take a look at the bass that I had build. To give me his opinion and estimation on how I did. He walked through the process I'd used, for defretting, paint stripping, and then staining and poly sealing. Demonstrated how to adjust the truss rod, and complimented me on the work I'd done.

John and I weeded out a couple of guitars that arrived in far-from-playable condition because we think every guitar should be at least reasonably playable when you buy it. Avi Shabat agreed, saying, “The more messed up a guitar is when I get it, the more I have to charge for setup.” We also didn’t have the short-scale guitars set up, for two reasons: First, we think a guitar for kids—one that’s likely to be purchased at a low price and given as a present—should play acceptably right out of the box with no setup; second, all of the short-scale models we received did play very well out of the box, and all were equipped with strings of the same approximate gauges.

Jack Douglas also points out a beneficial side-effect, in his experience, of recordings made using the phase EQ approach: "When you build a mix — I don't care if it's four tracks, eight tracks, or 96 — the real nightmare is when you put something up and the only way you can hear it is by blasting it. There's nothing worse than putting up something you're excited about, and it's gone. If you [record guitars] like this, I guarantee that as soon as you put the sound in the mix it will be there. Not only that, it won't wipe out everything else in the mix, because it will have such a separate and distinct character."
• Stop: A stop tailpiece is a bar, typically made of an alloy, which is held to the body of a guitar by large screws threaded into embedded sleeves. They are most often aluminum, zinc or brass based, with the latter the most costly. Aluminum has a few advantages. When the stop tailpiece was perfected by Gibson over a half-century ago, the originals were made of aluminum. Many players prefer those today for the vintage vibe, but aluminum is also the lightest weight tailpiece alloy, which some believe allows the strings and the guitar’s body to connect — which is another function of the tailpiece — in a more resonant fashion. It’s best to be careful while changing strings with a stop tailpiece, because they sometimes fall out of their sleeves and can scratch the finish.
{ "thumbImageID": "LC100-Classical-Guitar-Natural/518978000010000", "defaultDisplayName": "Lucero LC100 Classical Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115036014", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Natural-1274115036014.gc", "skuImageId": "LC100-Classical-Guitar-Natural/518978000010000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115036008", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Black-1274115036008.gc", "skuImageId": "LC100-Classical-Guitar-Black/518978000001000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Samick is a Korean guitar manufacturing company, that is known first for constructing their pianos using imported pieces. The corporation is capable of manufacturing more than one million guitars each year. They have an acoustic guitar with good quality which makes an exceptional sound. The company sell its guitars under its own brands such as Abilene, Silvertone, Greg Bennett, and Samick.
What equally contributes to the Entourage’s place on our list of the best acoustic-electric guitars is its nuanced and bright acoustic sound. This signature tone comes courtesy of a select pressure-test solid cedar top and wild cherry back and sides. The electronics on this model are easy to use and compact, highlighted by a pewter plate giving the entire package a stylish appearance.​
As their categorical name suggests, extended chords indeed extend seventh chords by stacking one or more additional third-intervals, successively constructing ninth, eleventh, and finally thirteenth chords; thirteenth chords contain all seven notes of the diatonic scale. In closed position, extended chords contain dissonant intervals or may sound supersaturated, particularly thirteenth chords with their seven notes. Consequently, extended chords are often played with the omission of one or more tones, especially the fifth and often the third,[92][93] as already noted for seventh chords; similarly, eleventh chords often omit the ninth, and thirteenth chords the ninth or eleventh. Often, the third is raised an octave, mimicking its position in the root's sequence of harmonics.[92]
Have you ever tried PRS acoustics before? They come with their SE line, and are fantastic quality guitars for the price. And their American acoustics are built by a small team of acoustic professionals. They only do "private stock" American acoustics now, but they used to have it as a regular lineup with about the same price tag as their custom 24. I've only ever heard them in video, but they sound amazing, and I've only ever heard good things about them. I would argue that PRS should have made that top 10 acoustic list at least over Fender or Epiphone.
The Yamaha LL16 gives you high-end features for a lot less money, starting off with its solid Engelmann spruce top and solid rosewood back and sides. This all solid body results in richer and more detailed acoustic tone, something that you will have to pay top dollars for from other acoustic brands. It also sports a slightly smaller body that gives it an elegant appeal, adding to its already favorable affordable price and top-tier specs.
At the end of the day, this is obviously far from a perfect example, but this is an extremely hard-to-find factory left-handed 1958 Gretsch Duo-Jet, and provides a very rare opportunity for the vintage guitar collector, lefty or righty! I have seen far fewer left handed 50s Gretsch guitars as compared to Fender, Gibson, and even Martin over the years. Lefty 50s Gretsch guitars are insanely rare, especially in the Duo Jet model!
• Wrap around: On wrap around tailpieces, what’s wrapping around is the string. Strings are slid into the tailpiece from the front and then pass over the back and top of the bridge before making their journey up the neck. This system creates less string tension. Some players report tuning and intonation issues with these tailpieces. Others swear by them.
How to Adjust Amp Settings for the Best Blues Electric Guitar Tone. The tone settings on an amp are as important as the settings on the guitar for producing the blues sound. The amp settings are a personal style preference. Blues guitar has a distinctive sound and tone which can be enhanced by the amp settings. Focus on the drive and reverberation settings for a good full-bodied blues sound.
I'm no pro, but I take my time when I'm buying a guitar. I played everything, and for feel, sound and playability, I was about sold on a Gretsch 6119 vintage remake. Then I played an Eastman TX 186. Hollowbody constructed from all solid wood, better pickups than the Gretsch, and just fantastic tone that gets better the more I play it. And it cost about 60% what the Gretsch cost - not an entry level price, but a guitar I won't get tired of playing. They deserve to be better known. Some of the Epiphones and most of the Ibanezes felt and sounded cheap in comparison.
If you're getting your amp for the purposes of playing out with a band, it's very tempting to invest in a large amplifier, whether that means a big combo or a half-stack (don't even mention a full stack). I get it; it's what the pros use when they're rocking out at festivals. The reality there is that the vast majority of the time, whenever you see a guitarist with a wall of sound, it's comprised mainly of dummy cabs with no actual speakers. It's for the look.
It has a sensitivity of 96 dB, just two units short of the M50x’s 98, but the maximum input power is less than half of that model’s, at 700 mW. The impedance is somewhat higher at 47 W vs. the M50’s 38 W. Besides the price, another identifiable upside would be the lower weight, of 6.7 oz, a feature that won’t be easy to discard after spending the whole day with the headphones on.
So essentially if you are looking for a thicker, higher output sound a humbucker will be a better fit for you. If however, you prefer a brighter, twangier tone a single coil will be best. If in doubt consider the guitar tones and styles of music you prefer e.g. Fender or Gibson and go with a similar style of guitar kit or even better grab yourself one of each.
SOLD OUT: ASK we may have another in stock Here we have a wonderful example of the Alvarez answer to the classic Martin 000-18 now famously linked to the Eric Clapton version from Martin om guitar today. Imported to the US by Saint Lewis Music 36 years ago. This fine example of the Alvarez 5014 is in excellent vintage condition you will not believe that she is over 36 years old when you see this in person you will realize it has been amazingly well cared for these past 3.6 decades. Its fit and finish is excellent as is its play action / neck angle ... this guitar is a pleasure to play and is truly EASY on the eyes... The neck is 1-11/16" at the nut and very comfortable to play with very little visible play wear to fingerboard or frets one will notice that this example is WELL above average condition for this age of guitar its really rare to see. Its beautiful SITKA SPRUCE top is solid and the back and sides are excellent grade Mahogany as is the neck please refer to the pics ... with nice details like its herringbone rosette, celluloid tortis pick guard, exotic Brazilian Coral Rosewood headstock overlay this guitar is more fancy than the other 5014's we have had and is in near mint vintage condition. The woods are well aged and the tone and volume has nicely opened up and aged like fine wine it takes time... a lot of guitar for this kind of price. Crafted in Japan over 36 years ago and kept in Amazing condition all these years just for you... Nicely set up with a NEW Martin Bone Nut & compensated bone saddle here at JVGUITARS. get this gem before she's gone! questions let me know... .

Many great players (including Hendrix) placed the wah before distortion... though many of the modern rock guys place it after distortion to make the frequency sweep cleaner. Personally, I prefer the Wah before distortion, but it's personal taste really. Depends a bit on the pedal too - how wide the frequency notch is and what frequency range it covers. I have my Wah on a G-Lab True Bypass Wah Pad, which I think is a great product... I have a few Wahs that I like, the Keeley Mod Vox Wah and the RMC3 are probably my first choices to try out.
Small guitar amps, contrary to popular belief, have the ability to produce a very powerful sound. You don’t need a whole lot of surface area to have an impressive sound, as so many chihuahuas have proven by keeping up their owners nights on end with their barking. The small amplifiers, the best of them, have sound comparable to the sounds of the larger amplifiers. This has been proven many a time, especially by the band called Annihilator. The guitar player for the band has a very specific set up for himself, with a relatively small amp being one of the main parts of the set up. While his is not as small as some of the ones here, it just goes to show that a live performance does not need a large amp for good quality sound.
Thanks for your opinion Sheils. While your advice is appreciated, certainly no two guitarists would come up with the same guitars for any given list, or present an article like this in the same way. However, you did mention a few points hopefully readers might find useful. Constructive feedback, and the expression of different opinions, is always welcome.
i have an old Dorado solid-body electric serial # 0726454 on the neck plate it says STEEL ADJUSTABLE NECK, then the serial number, then made in japan. it has abalone fret markers, and dorado is in abalone in the headstock, blonde finish white-black-white-black pickguard, and a funky trem. i was told once that maybe guild had made this guitar... seems pretty unlikely... and that it retains it's original value, it all seems pretty unlikely... but i don't know... please help!!!
If you do want to use single pedals then BOSS compact pedals come with a buffer circuit that converts your high impedance input into a low impedance output. For a more detailed discussion on the topic of single pedal buffers check out Steve Henderson’s excellent article here:
Pickups and body styles are just scratching the surface when it comes to guitar features. No matter how overwhelming things may seem, though, if you’re only a novice or hobbyist there’s no need in fretting (get it?) over every single feature. Instead, look to the features we mentioned and go from there based on what type of music you want to play. If you’re a big blues and classic rock guy, powerful, full sound is necessary: you’ll likely want a semi-hollow or solid body guitar with humbuckers or P90s. Want to play old school country or folk? Check out hollow bodies. Are you a fan of alternative and punk? Consider a thin solid body with single coil pickups.
My first Custom was a Charvel/Jackson Star body with a custom white paint with bullet holes and dripping blood from the holes ! My friend and Guitar teacher Randy Rhoads helped me get started on the right track in 1980 ,before I was playing in clubs and headlining shows later in the 80s and 90s,I was set with the perfect guitar! Gibson is just a brand name,Epiphones are better then Gibsons ,your just paying for a name,same with Fender! Remember,one of the greatest guitars was made for less then $300,so you should never really spend more then that unless it is a custom ,then you can do what you have to!

Shouldn't even be questioned. Ever hear of 'Voodoo Child'? Yeah, that was recorded in one take. & almost entirely improvised. & it's the greatest recording of an electric guitar being played EVER. & this isn't from some idiot who just listens to a lot of music, I play the guitar and have done a lot of reading and I know a few of your favorite guitarists would agree with me.

All electric guitars have this switch but it varies from guitar to guitar. it is called the pickup selector switch. It is used for deciding on which pickup to use on the guitar. On a les paul style guitar it can be used to select the neck (traditionally rythm pickup), bridge (traditionally used for lead) and both pickups together.\n. \n===\n. \nThat's what it is on a normal Gibson Les Paul. But on a Gibson Les Paul BFG, that is a "kill" switch that turns the guitar off completely. On many Gretsches, the toggle switch is a tone switch flipping between bassier and more trebly sounds. On most Fenders, that switch is down on the lower bout by the volume/tone controls (but on a Telecaster Deluxe, the switch is where it'd be on a Les Paul). Then there are oddities like the Italia Rimini, which has no pickup selector switch -- just individual volume controls for the two pickups.\n. \nEvery guitar has a different design. You'd have to look into every model.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 
If you're new to distortion and overdrive pedals, you might be wondering what the difference is between them. For the most part, they do the same thing and are both often referred to as gain pedals. How they differ is that distortion pedals usually provide a harsher, grittier tone with increased sustain. When it comes to distortion, think of genres like grunge and death metal. On the other hand, overdrive pedals are designed to emulate the sound of a tube amp when you increase their volume. The result is a warm yet crunchy sound that's ideal for playing blues and classic rock. Of course, one is not better than the other, and the right distortion or overdrive pedal for you will be a matter of personal preference.
So, if you’d like to emulate some of the guitar greats like Jimmy Page (Led Zeppelin) or Slash, this Epiphone package again with all the extras you’ll need—but with an Epiphone guitar—is a great way to start. Also, it’s worth mentioning that Gibson/Epiphone Les Paul designs usually have a slightly rounded, more narrow fret board and, in my opinion, are a little easier to play compared to the flatter, wider Fender fret boards. But I strongly recommend you don’t take my word for that. Get into a music shop and try the two types of guitar for yourself.
Though the guitar is black, the wood for the top is spruce, with meranti back and sides, and a rosewood fretboard and bridge. This is a full-size guitar (52mm nut), though there is a 7/8” size available. The only thing is, with the 7/8” size you won’t be able to get the black color. The one thing in common between the two is the gloss finish, as well as the types of wood used.
Certainly the most desirable of the Martin body size is the 000, 0M, and D sizes. Many consider the 000 (and OM, which is essentially a 000) to be the ultimate guitar size, where others feel the "D" size is the best. It's personal preference. There are some interesting facts though about the 000 and OM sizes. (In Martin's 1934 catalogue, any flattop guitar that had a 14-fret neck was named an "Orchestra Model", while the older 12-fret design was named a "Standard Model".)
I got this guitar just a couple months ago, not knowing much about guitars and not really knowing much about quality or anything I did a lot of research about what would be the best purchase for the right price for a beginner guitarist.. and I stumbled upon the Yamaha FG700, Fantastic reviews and ratings for beginners with great overall quality and overall sound, especially for the cost. I did a bit more research, comparing instruments and what not just to be sure I didn't purchase something that was made out of cardboard and shoe strings when I stumbled upon the Yamaha FG800, which was said to be the upgrade of the 700. I did some reading and though it didn't have as many reviews it was said to have improved sound and durability for the exact same price. Knowing that Yamaha has pretty much always been rather good quality
The Les Paul Triumph bass, like the Les Paul Recording guitar was first shipped in 1971, but was based on a slightly older model, the 1969 Les Paul Bass. Functionally, these basses were very similar, although the Triumph did offer low and high impedance operation, without the need for a transformer cable. This owners manual details the basses specifications, suggests a string set, recommended action, and suggests a series of tonal settings for rock, country and solo bass playing.
Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.

Some delay pedals also come with full looping abilities, allowing you to play detailed multi-part melodies completely by yourself. A few artists to look to for great examples of delay pedal use are Angels and Airwaves, U2 and Muse. Reverb pedals are an entirely different animal. It brings its own unique type of sustain to a note, infusing the sound with strong texture and character through its distinctive echo. Creating a sound not quite like any other effect, reverb calls to mind the energetic surfer rock of the 1960s, such as Dick Dale's version of "Misirlou." You can stay true to those vintage roots or take the effect in a new, modern direction—it's up to you. With the added dimension they bring to your tone, you'll want to use your delay and reverb effects pedals at every performance. They make a unique contribution to the sound individually and even more so when you use them as a team.
Heritage Guitars, founded in 1985 by four long-time Gibson employees when Gibson relocated to Nashville, continues to build guitars in the original factory at 225 Parsons Street inKalamazoo, Michigan. Many of their models evoke memories of Gibson’s late-1950s/early-1960s “golden years.” The H-150 and H-157 are reminiscent of the original Les Paul and Les Paul Custom, while the H-535 is a modern version of the Gibson ES-335.

There are many different kinds of pickup selectors. The most common forms of pickup selectors are 3-way and 5-way switches. Obviously, a 5-way switch gives you more pickup combinations than a 3-way switch. Below are some diagrams of what 3-way and 5-way pickup selectors can do. In choosing a pickup selector, I suggest that you try to replace your pickup selector with the same kind of selector. Refer to the manufacturers website and wiring diagram to get the right specifications. Notice I said to get the same “kind” — not the same one. It would make no sense to replace a cheap selector with another cheap selector. Find out the specs on the old selector and buy a nice one.

The neck contains a metal truss rod that prevents it from bowing and twisting due to string tension and environmental factors. Adjusting the truss rod corrects intonation issues that prevent the instrument from being tuned properly. This truss rod can be adjusted either at the headstock, or just inside the body of the guitar, at the base of the neck.
Should space restrictions or volume levels make these methods impractical, try adding an air-guitar part as an overdub to a conventionally miked guitar track. The principle is similar to vocal doubling, for which the same part is performed twice; you may not be able to do this for an improvised solo, but for rhythm parts or composed lines, it's a snap. In addition, double tracking with a bright acoustic guitar or a smooth-sounding hollow body will add extra richness and some slick, big-budget zing to your mixes.
Effects can be connected via insert points, or the effect send and return loop that is included in most consoles and DAWs (Digital Audio Workstations). When effects are used in the send/return loop, their Mix control should be set to 100 percent wet, so you add back only effected sound to the dry sound, which comes directly through the mixer channel.
And that's a wrap. If you're new to the pedal game, don't let anyone tell you that there are no rules. There are some very strict rules that apply if you want to sound professional, and these rules quickly reduce the amount of options down to very few, indeed. The honest and realistic among us will tell you the truth that there is a very firm effects pedal order you should connect your pedals in that you don't want to stray from unless you want to ruin your tone and appear to not know what you're doing. Guitar pedal order matters!

The envelope filter is also known as an auto-wah.  It functions sonically like a wah-wah pedal but uses the strength of the signal to control the sweep of the frequency.  Typically, control knobs allows the player to set the amount of wah to interact with picking, so that the guitarist can dynamically control the effect without using a rocker to engage the filtering.

{"id": "J40301", "categoryId":"site5AAG", "name":"Les Paul Special Vintage Edition Electric Guitar", "pageUrl":"/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"149.00", "priceMin":"149.00", "priceMax":"149.00", "msrp":"248.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"64", "brand":"Epiphone", "reviewStarImageUrl": "", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"20", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"93895071200", "priceVisibility": "1", "itemType": "New"}

Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!
Control knobs and buttons are typically on the front of the cabinet or chassis, though in some cases, the knobs are on a recessed panel at the back of the top of the amplifier. The most basic amps only have a few knobs, which typically control volume, bass and treble. More expensive amps may have a number of knobs that control pre-amp volume (or "gain"), distortion or overdrive, volume, bass, mid and treble, and reverb. Some older amps (and their re-issued versions) have a knob that controls a vibrato or tremolo effect. The 1/4" input jack is typically mounted on the front of the amplifier. In the simplest, least expensive amplifiers, this 1/4" jack is the only jack on the amplifier.

Choosing the right strings for your instrument and your style of playing might not seem like the biggest deal. After all, the Delta bluesmen of the ’20s, ’30s and ’40s often bought used strings at dry good stores for a few pennies, or boiled old strings to brighten them up. And the proliferation of brands on the market can be overwhelming to the point of leading a player to assume strings are as generic as picks – which aren’t really generic at all, but that’s another story.

It doesn't even seem to matter which kind of Guitar amp you have or when plugged into any PA system. This guitar is a keeper. it comes with Godin Nickel Strings which is why unplugged it may sound too tinny to some ears, but after changing to Elixer Acoustic Strings, it sounds much better unplugged and really shows off plugged in. It now can give my Acoustic six strings a real run for my attention. At gigs and open mics, people come up and ask,,,what the Heck is this Bruce? Looks and sounds amazing. My only wish is that it had the same Pick-up system as on my A6 Ultra, two separate Pick Ups and Controls and two 1/4 in outputs.
Thanks for the post on ’66 Deccas and the video. I have a red sunburst DMI-203 with the chrome pick guard as in your picture. My first electric guitar in 1966 was the same instrument with no name on the headstock but with paperwork saying GHI/Heit. Bought it in a department store plus a Concordia amp for $50. Sold it in ’69 when I needed cash for a car (for $75!). I picked up the Decca about 10 years ago. Vintage Guitar magazine did an article of some work done on it in it’s Jan. 2014 issue.
In his early days, Jimmy James, as he was then known, played in rhythm sections, backing artists like Little Richard, B.B. King and Ike and Tina Turner. It isn’t until 1966, when he moved to London and formed the Experience, that Jimi Hendrix was able to cut loose and start getting the attention he deserved for his magnificent guitar work. Alarmingly, Hendrix was virtually unknown in the U.S. until he played at the Monterey Pop Festival in 1967—the legendary performance in which he doused his Fender Stratocaster with lighter fluid and set it on fire.
Anyway, here’s how you adjust the truss rod. This must be done with the strings tuned to whatever pitch you usually use. If your neck is too bowed (the gap you just measured is too big), you tighten the truss rod by turning the socket clockwise. It is recommended that you only turn the tool a quarter turn at a time (or even one eighth) and then give the neck some time to settle. You will also need to make sure the strings are still properly tuned after each adjustment.
Why We Liked It - Even if this isn’t the cheapest guitar on our list, we think the Schecter Hellraiser is the best bargain! To get this much guitar for so little money is almost incomprehensible and we feel like a million bucks when we play it! It not only looks good, it sounds fantastic, and you can be sure to impress everyone who hears you play with this wonderful instrument!
Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.
AT LAST!! some gd stuf about john frusciante, hes the best living guitarist in my opinion. i don't get people who think those random metal shredders should belong in the top 10 list…. bein insanely good just on technical stuff means nothing… its kinda like shredding as fast as possible on a pentatonic scale, people will respect the skills, but wheres the soul? this is the exact reason why hendrix and jimmy page always get on these lists but not guitarists like buckethead, i mean seriously he has less tone then any of the GnR guitarists.. if slash is not on the list, theres no way the kfc man can get any close. to all the haters, tom morello is a very innovative guitarist and by far more creative then buckethead. I swear the world is no longer a place for good music.
CALIFORNIA CLASSIC models feature superb playability, distinctive looks and an unmistakable Fender vibe. The fully-painted solid Sitka spruce top and natural solid mahogany back and sides, as well as a matching painted 6-in-line headstock and koa binding and rosette, give them an elegant two-toned aesthetic that was made for the stage. California Special and California Classic acoustic guitars are equipped with a Fender- and Fishman-designed PM preamp specifically tuned to complement the unique shape and voice of each instrument—complete with tuner, frequency and phase controls.
Music man make the best regular production (i.E. non custom shop) guitars on the planet. Nobody else comes close. This is the quality that everybody else should be reaching for. The fit and finish and playing comfort are second to none. And the oil finish on the necks is to die for! These guys don't just churn out minor variations on the same 60-year old theme, they actually innovate, they challenge, they dare. Wonderful new designs, made for real players. The results are outstanding. Roasted maple and all-rosewood necks, new chambering and tonewood construction ideas. They are so far ahead of the game it makes you wonder why the rest of the industry stays so stagnant. Music Man are the only guitars I will buy now. I'm so proud to support them!
Another tone option for a guitarist is to put a pickup out of phase with another pickup, producing a thin "inside-out" squawky kind of sound. When 2 pickups are in phase, they work together and reinforce each other. When they are out of phase the 2 pickups are working against one another and the resulting sound is the "leftovers" from these cancelations. The closer the 2 pickups are, the greater the cancelations, the thinner the sound and the lesser the volume. Therefore, the neck and bridge pickups out of phase is the best choice for this type of sound.
Before taking the plunge, make sure that you have the necessary tools to build the guitar of your dreams. Most kits will require you to have screwdrivers, pliers and soldering iron for the assembly process. While others require more, like wood glue, bandsaw and other wood routing tools. Once you've decided on the finish, you'll also have to get finishing tools like sandpaper, wood sealant, primer, paint and more. It is also recommended to have a dedicated room or space for you to work on, a nice working table would also make work a bit more easier.

Gold trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

The downside of boosting the volume of an acoustic guitar this way is the fact that every microphone adds a color of its own to the end result, not to mention the preamplifier and any compression and equalization applied. In other words, not only do you have to position the microphone correctly, but you also need to be very careful when choosing which mic to use.
The culture of staying up late and having some drinks any and every night of the week was what I grew up around. But it was also twinned with a kind of mountain vibe because they were young and happy to have gotten away from the farmlands. So they were really into pop music. So the two things kind of came together, this assumption that you played or sang.
I have one of these and what I like about this guitar are the little touches. The arch top and binding helps set it apart from other guitars around this pricepoint, as does the black chrome hardware. Schecters are enormously comfortable guitars to play and their finish work is excellent. This is a lot of guitar for the money, but you can upgrade twice within $500 with the Omen Extreme-6 and the Omen Extreme-6 FR, depending on your needs. After owning mine for a few years, I tossed a couple of Seymour Duncan Antiquity pickups in it to give it a serious upgrade and more longevity.
Certain features make Vintage® guitars a “bigger bang for the buck.” Subtle changes to traditional guitar designs have been made so they perform much better. For instance, on the spring block, the holes are staggered in a way that allows the strings to leave the block and pass over the saddles at a consistent angle that helps keep those strings in tune. Trev also developed tuning keys called EZ-LOK™ that work like a locking tuner, but actually don’t require any mechanical manufacturing. There’s nothing to unwind when you’re slacking the strings using the vibrato, and they always come back to pitch. The same goes for our pickups. Trev doesn’t have a high-dollar pickup range to protect, so he can produce pickups that will sound as good as any company can wind anywhere in the world.
Some resonator guitars possess metal bodies and these are called steel guitars. This can lead to some confusion with the Hawaiian guitar of the same name. They are two distinct instruments. The Hawaiian steel guitar takes its name from the steel bar used to create the glissandi and the Resonator steel guitar refers to the material used for the construction of the body.
1960's Teisco Del Rey, Model ET-220 "Strat-Style" Electric Guitar. Both original, single coil, "Spectrum" Pickups. Great, original Candy Apple, Metallic color. Bound, Rosewood fingerboard. Laminated maple neck. Separate ON / Off switch for each pickup. Overall Rhythm / Solo tone switch. Volume and Tone control and adjustable truss rod. With the exception of some "Battle Scars" on lower bout of body (see photos) the finish and wood in great shape. Plays and sounds great. Missing whammy bar. Not many finish chips. Very shiny. Frets in great shape with minor, normal wear. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body) and cleaning and polishing. Plays and sounds great. We also installed a new set of .010 strings. No case included.
Along with the options mentioned, be sure to check out overdrive pedals like the Ibanez Tube Screamer or the Boss Super OverDrive SD-1. As for distortion pedals, be on the lookout for the TC Electric Dark Matter Distortion Pedal or the MXR M75 Super Badass Pedal. Whether you're going for a heavy Sabbath-like snarl, the cutting buzzsaw tone of Johnny Ramone or Cobain's feedback-drenched squeals, the distortion and overdrive effects pedal for you is waiting in this catalog.
This pedal has been a great start, it has been looked after very well and is in excellent condition. I am upgrading my sound which is the reason for the sale. “Great guitarists know it's all about nuance. With its built-in expression pedal, the Zoom G1Xon allows you to add subtlety and refinement to your performance. Add in 100 great-sounding guitar effects and amp models—with the ability to use ...
Original plate reverbs were mechanical in nature. There was a literal plate inside the amplifier, which would transform input signal into vibration. Then you would have a pickup located somewhere near the plate, that recorded those vibrations. Today, such a contraption comes across as relatively crude, but many still love the unique mechanical sound it produces. Spring reverb uses a pretty much exact same principle, only this time you have a spring in there instead of a plate. The biggest improvement a spring reverb offers is reduction in both weight and size of the device.

And while he'd heard its calling, Swank didn't move into the field until death arrived at the music shop where he was working. The resident guitar repairman suffered an aortic aneurysm and died. "It was terrible," Swank says. "He was a good friend of mine, but he still had a bunch of stuff in his shop." But Swank was able to step in and finish some of those jobs, and then more jobs began pouring in. The next thing he knew he had built a reputation for himself. "I'm a [guitar] player. I know how I like things to work, how instruments should play."
Lawsuit Takamine F375s Hand built in Japan and still in excellent vintage condition! Build type is Rare Exotic Tone woods series Jacaranda Brazilian Rosewood back-sides-fingerboard & headstock overlay JUST Gorgeous. Its workmanship is really top shelf by any standards, We installed and set up with Martin Marquis 80/20 strings 12's, as well as setting this guitar up with a New bone nut & saddle, Condition is very good with a few minor hard to see scratches on its back you have to look closely sometimes at an angel ( clear coat only not threw to wood ) general play here and there as any 37 year old guitar that has been played would get... dinks and such but nothing major to detract from its obvious outward beauty, This example has an excellent neck its 1-11/16th's at the bone nut, fingerboard is very good as are the frets at 90%, its straight and has a nice meaty feel, has the Martin design detail of the Diamond Volute on back, original tuners are excellent as well, a warm vintage vibe to this 37 year old vintage Gem. Tone is rich with good volume she Sings well!!! JVG Rated 9/10 higher if it wasn't for the few minor clear coat scratches in its clear coat not to the wood that I can see more like swirls and such may be possible to fine grade 3000 wet sand and polish out its possible if it doesn't sell soon when I get the chance I'll do it, its a commitment because it may not sand out alone it may require a few thin clear lacquer applied and buffed out to cure it forever if so a guitar of this caliber deserves the attention.. ( the price will go up after I do that work ) and that really doesn't have to be done to make this guitar just very good -excellent vintage it would bring it very close to mint!.... aside from the few minor scuffs this guitar still qualifies as vintage excellent right now, just thought I would point those out. So to be clear about this listing the way you see it now is the way it is offered.Its a F375s and not the EF375s yet This guitar has a factory installed transducer type pickup installed and it sounds wonderful, Its said to have been installed by original owner in Tokyo by Takamine shop its a very clean job I call it CLEAN where they do not make extra unnecessary holes for output jack instead they use the END PIN hole and its a combination strap pin and or output jack, So this guitar is either Acoustic or Electric really nice in deed in SUPER Condition well above average. This beautiful instrument comes with its original hard shell case it to is in very good vintage condition its heavy duty molded type with plush black interior all functional fully. This is the total package. Contact Joe to buy: .
Second, just like removing the pickup selector, you will need to access the back electronics cavity or remove the pickguard. Refer to the pickup selector section for more details. Take note of what wires are soldered to what lugs before you remove the pot. If you are not familiar with electric guitar wiring, I suggest that you draw a picture of the selector and label the soldered wires. Once you know where everything has be wired, you can cut the wires close to the lugs and remove the old pot. Then you can bolt the new pot in place, solder the wires on the lugs, replace the cavity covers or pickguard, and replace the knob. For more information about how to solder wiring, see the soldering page.
He's not talking about that kind of 'setup', it's not a type of guitar, it's an essential basic maintenance you perform on any guitar. The setup that he's talking about involves properly adjusting the neck relief (the bow of the neck), the string/saddle action (height above the fretboard), and the intonation (altering the length of the string by moving the saddles on the bridge closer or further from the nut so that the strings are in the most consistent tune up and down the neck).

The moral of this story is simple, if you have an old Terada, Yamaha, Ibanez, Suzuki, Yairi, Tokai, Takamine, Emperador, Morris, Pearl or Tama (yes! they made guitars to) just to name a few, you probably have a guitar that given the right bit of TLC will wipe the floor with most of its modern competitors, including those beautiful guitars that cost $2000.00 plus. Ok Then, enough of my yacking, enjoy the pictures.
With expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with "locking" nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use.