ACTION: fret low E at first fret and measure the distance from the bottom of the to the top of the 15th fret. It should be 5/64". Do the same with the high E, measurement should be 3/64". Now measure the string height at the nut; underside of the string to the top of the fret. Low E and A should measure 2/64", D and G =1.5/64" and B and high E = 1/64". If string height at nut is correct, recheck string height at 12th fret with strings open. Measurement for low and high E's should be the same as measurement taken at the 15th.
One and one half steps down from Drop D. This tuning is most often used by modern rock and heavy metal bands. Utilized by bands like A Day to Remember, Slayer (on "Cast Down", "Seven Faces" and "Payback" from God Hates Us All, as well as few songs on Christ Illusion, World Painted Blood and Repentless), Slipknot, Intronaut, Down, Machine Head (tuned 40 cents sharp), Demon Hunter, Chevelle, Origin, Asking Alexandria on their third and fourth albums, From Death To Destiny and The Black respectively, RED (on "Faceless"), Parkway Drive, Skillet (on much of Comatose), Veil of Maya, Bring Me the Horizon (up until Count Your Blessings), Sevendust, Soilwork, Chimaira (on a few songs from The Infection), Eye Empire, Crown the Empire, The Devil Wears Prada, Drowning Pool, The Veer Union, Comfort in the End, Attack Attack!, Mark Tremonti (on much of Full Circle and All I Was, and the songs "Coming Home" and "Home" from Blackbird and AB III, respectively), Nickelback on the song "Side of a Bullet", Disturbed on Immortalized and occasionally Black Stone Cherry, Limp Bizkit, The Kills, and Sucioperro.

The EB-1 was probably Teisco’s first electric bass guitar. This was basically a Fender Precision bass copy, with a P-bass offset double-cutaway body, bolt-on neck, Tele-style four-in-line head, the fingerboard edge rectangle inlays, a wooden adjustable bridge and a covered tailpiece asssembly. The pickguard was very similar to Fender, with a single pickup in the middle. It’s not known how long this bass was offered, but by the following year the similar EB-2 was introduced, and no mentions of the EB-1 are encountered, so perhaps it only lasted around a year.

70s Morris D-28 Gorgeous Rosewood body Dreadnaught Acoustic Japanes Vintage BOOMER with Martin Set Up Just in folks get the jump on this being processed now- pictured etc measured and pictured We have already set her up with our Martin Bone Nut & Compensated Saddle se as well as upgraded bridge Pins to solid Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic if not familiar with the Morris brand thats ok many are not, I have know of these for 2 decades now many of these were made in the Terada factory in Japan... another name you may not have heard of none the less they are know to make the highest end guitars in Japan in those days and also today, for makers like Ibanez virtually all of their top end guitars like Musicians - Artists - George benson GB line and the old Aria L-5's and Ibanez L-5's and many others continuing on today in that great Custom Shop tradition. This is one of them and is very well constructed with top workmanship and fit and finish build quality is comparable to a Martin- Taylor_Gibson and so on... that is to say no worries this guitar Morris has an excellent pedigree. Guitars of great playability and great sounding what more do you need?.... This guitar was built from woods aged at least 20 years at time of build that was over 40 years ago and just look at its condition to this day... it has truly stood the test of time. See for yourself... it this price range a wonderful classic Dreadnought style Japanese true Vintage guitar in its own right. Great Value and great fun Japanese vintage collectible. For a song. More info soon .

As one of the best electric guitars under 200 dollars, the instrument utilizes an agathis body, a bolt-on maple neck, a sonokeling neck, and a classic rosewood fingerboard with 22 frets and white dot inlays. The electronic section features a peculiar combination of one humbucker and two single pickups, allowing the guitar to cover plenty of sonic ground.
Orion Blue Book Online (at The Orion Blue Book Online will help you determine how much nearly anything that you own is worth, including guitars. This includes electric and acoustic guitars, as well as bass guitars, amplifiers, and other guitar peripherals. The company behind Used Price works in conjunction with Orion Bluebook, which makes this the largest website dedicated to pricing used musical instruments. The website is browsable by the first letter of your instrument's manufacturer or make. It has every major guitar manufacturer and most obscure ones.
Because driving the power valves this hard also means maximum volume, which can be difficult to manage in a small recording or rehearsal space, many solutions have emerged that in some way divert some of this power valve output from the speakers, and allow the player to generate power valve distortion without excessive volume. These include built-in or separate power attenuators and power-supply-based power attenuation, such as a VVR, or Variable Voltage Regulator to drop the voltage on the valves' plates, to increase distortion whilst lowering volume. Guitarists such as Eddie Van Halen have been known to use variacs before VVR technology was invented.[specify] Lower-power valve amps (such as a quarter-watt or less)[citation needed], speaker isolation cabinets, and low-efficiency guitar speakers are also used to tame the volume.
Sweep picking provides you with a more economical way to pick one-note-per-string or combos of one-note-per-string and two-note-per-string instances up and down the string register. Not to be confused with raking, the idea here is to fret and ring out every note clearly (no cheating!). To do this, it’s of paramount importance you approach this technique slowly and be very critical of each note’s clarity. When starting to sweep pick, start with a locked wrist and don’t be afraid the experiment with varying pick widths.
Paul Reed Smith’s offering to pro musicians with exacting standards, the PRS McCarty 594 takes its name from two things. The first is its scale length of 24.594 inches and the second is that it’s a 1959-spec guitar with four knobs. According to Paul Reed Smith, this vintage-inspired instrument aims to recreate the most desired classic Gibson tone, that of a ‘59 Sunburst.
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Ibanez AEQ200T - String Instrument Finish: High Gloss Natural
Go to iOS Ram List  Both the above sets convert your device or PC to the equivalent of a high-end sound module for your midi keyboard.  It has the full 15-velocity-layered version of the Yamaha C5 Grand (592mb) along with lots of other sounds. This set also includes extra string sounds that are in the Nice-Strings-PlusOrchestra set (all except the harp).
A lot of people will tell you that Jackson is not what they used to be. I’m not really going to try to refute or prove this claim, but their guitars are holding up pretty well at this moment. It’s still a brand you can trust to build you a solid guitar. Case in point that JS32 Dinky. It’s my favorite Jackson even though there are much better models in their current lineup.
Plug an electric guitar into the input. Adjust the input drive level as high as it will go without causing the input clipping light to activate. Adjust the drive level control to a level below where the drive clipping light activates. Different reverb sounds can be achieved by lowering and raising the reverb drive level. Adjust the reverb level for a nice sounding balance between the dry and reverb sounds. Adjust the output level for the optimum volume level. Now go play some surf music.
Hawaiian lap steels are not in the American Teisco Del Rey catalog, however, five laps remained in the ’66 Japanese Teisco catalog. Still available was the Harp-8, an 8-string console with two pickups and some sort of electronics controlled by four floor pedals. Still around were the H-39, the H-905 and the self-amplified TRH-1. Also available was the H-850, a single-pickup 6-string very similar to the H-905.

The Tube Screamer pedal has a long list of iconic users including Stevie Ray Vaughn, Gary Moore, John Mayer, Joe Bonamassa, The Edge and many more. As such, it is only expected for a company like Ibanez to take advantage of its popularity to extend their reach in the amplifier market - resulting in the creation of the Tube Screamer Amp (TSA) series. The Ibanez TSA15H leads the series in terms of ratings, with its compact yet versatile head profile while having the same combination of tube amplification and built-in tube screamer circuitry. At its core are two 12AX7 preamp tubes and two 6V6 power amp tubes, a standard configuration that sounds good on its own. Its standout feature is the implementation of a Tube Screamer circuit, which comes complete with the same controls as the iconic green pedal it is based on.
Thanks for popping in! Yeah, that g-string issue's a real pain. I also get it on acoustics for the same reason. I've found that, aside from sloping the slot DOWN on the peghead side, if you also try to provide a gentle (side) edge where it starts to head towards the g tuner, that helps too. What I'm trying to say is that you should try to give as clear a path as possible to the tuner to reduce interference/friction. I've tried to illustrate what I mean here: but let me know if it's not clear. More on making a nut here, by the way:
Electri6ity is frequently compared to Musiclab’s real electric guitar line as they came out around the same time, and while Musiclab delivers better quality in most aspects, you only have one guitar per VST - where Electri6ity has eight. However,  while Electri6ity will give you twice as many guitars for the price, Musiclab continues to update their Real line, now blowing Electri6ity out of the water.

Another popular modification is to reverse the electric polarity of one of the pickups (or one coil of a dual-coil pickup). When two pickups are selected, this produces a very thin and weak sound, due to phase cancellation between the pickups.[21] The closer the pickups are to each other, the greater the cancellation and thus the weaker and thinner the resulting sound. In case of a humbucker this results in a sound that is so weak as to be almost unusable, as well as the loss of the pickup's hum-cancelling properties (due to the coils being magnetically out-of-phase, but electrically in-phase with each other).[22]
Note that the information presented in this article is for reference purposes only. Antique Electronic Supply makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.
Here we have for your consideration the Booming classic vintage Yamaha FG 160 Acoustic Guitar Made in Japan in the early 70's from Nippon Gakki factory. This example is an eary 70's a more RARE version Yamaha FG 160 again this example is the Made In Japan Nippon Gakki and not to be mistaken for the similar Korean version of the FG-160 which is also nice but not the same as these apples/oranges this is a great guitar. This example was built over 35 years ago and was built to very high detailed standards workmanship are wonderful quality as well as some of the best woods available in that time period to compete with the great Martin and now this Yamaha is quite well aged and is a true SINGING vintage guitar in its own right. This one has the Amber/Tan label and not the Red Label. The frets have good height and appear newish and though to probably to have had a fret job done sometime in it's past. The guitar has it's natural age and patina with a few expected minor nicks,dings and scratches from a well loved and played instrument. This fine example is on the way... We upon receiving we will remove strings clean and detail the guitar oil rosewood and polish finish, set intonation and set up this guitar to play very well and may include new bone nut/saddle/strings we have several of these old Yamahas and they are amazing instruments very well compared to Martin, Taylor, Gibson for there fine construction and playability with amazing tone for this kind of money... Here s a link to Harmony Central if you care to re All New pics and additional info soon to come... Interested ? ask Thanks .
The amplifier includes buttons for four different amplifier simulations: Clean, Crunch (a typical rock/blues sound), Metal (self-explanatory), and Insane (a version of Metal that our panelists found so distorted as to be nearly unusable). Like the Champion 20, it has a gain control (which is labeled Drive), and it adds a midrange control to its bass and treble controls.
If you want to combine the dynamics of a well-recorded drum kit with the pumping excitement you get from heavy compression, send either the overheads only or the entire kit to a buss and insert a nice-sounding compressor there. Set the compressor to a high ratio and low threshold and mix in some of this with the song. You may need to adjust the attack and release controls to get the effect you're after, but you don't need to blend in much of the compressed sound to really add punch and weight to a drum track. Nicholas Rowland
The difference between laminate and solid wood is that laminate is several thin sheets of wood glued together, while solid wood is a solid piece of wood. The glue that binds the pieces of laminate together reduces the amount that your guitar vibrates, which in turn lessens your volume and frequency production (tone). Solid wood resonates more efficiently, so instruments that use it are louder and sound better. On the flipside, laminated woods are cost effective, reliable and resilient to weather changes.
Fender Kingman "C" Custom Shop Acoustic/electric in Fiesta Red, 1 of 150 worldwide. This was a limited production that came out of the custom shop in Hartford, CT. Has a Fishman pickup. Not a nick, ding or blemish will you find on this guitar, almost museum quality. Comes with original Fender case(perfect shape), Certificate of authenticity and other paperwork and allen wrench. Ships to the US only.
There is traditionally a gap between how we enjoy the sound of our guitars and the way they’re represented plugged in. Enter Yamaha, a leader in stage-ready acoustic technology for decades - and in the A5R ARE, it may have just offered us a very desirable solution. The A5R''s rounded fretboard edges offer an enjoyable playing experience that mimics the feeling of guitars that have been played in to a degree and it has an ethereal quality in the high ranges, even though some treble resonance is traded with the lower action. The A5’s resonance and bright balance is a fine showcase for the clever SRT2 preamp - we actually couldn’t dial in a ‘bad’ sound on it because the treble and bass controls mirror the natural subtlety of the pickup/mic dynamic design. An electro experience that captures the sound of an unplugged acoustic? The SRT2 is one of the closest to get there yet. An update that marks the A Series out as an essential consideration for players who rely on a consistent and controllable stage sound.

I've been an on/off guitar player for at least 15 years now. Never really good, but steadily improving. My hardest thing is consistent motivation. I go through spurts where I study theory and practice like crazy and then, suddenly I just stop. I got this both because I was exceited about it's teaching potential (lessions were $20/30 min when I was a kid, got this for $25) and it has got me playing again and is a lot of fun.

I bought this Fender acoustic/electric guitar about 9 months ago. It has a wonderful rich tone, is easy to play and is beautiful. The grain on the mahogany is dark and beautiful. It lives up to its dreadnought name and can fill a large living room with its sound. The tone is deep, rich and mellow. Strings are separated enough for easy picking. Tuning pegs are of decent quality and once strings are broken in it stays pretty much in tune. Other than putting on some bronze phosphor strings I did not need to set the guitar up. I really haven't played it much with an amplifier so can't comment on the electronics, other than the built in tuner works well. The hardside guitar case is well padded and looks professional. I was a little concerned about buying a guitar over the

Although much less common, the second trick I have in store for you shouldn't be taken lightly. The idea is to double a more or less distorted guitar part with an acoustic recording of the strings of your electric guitar recorded simultaneously as the distorted part. As preposterous as it sounds at first, considering that the sound of an electric guitar without an amp is certainly not the most pleasant one, the overall result can be truly amazing! Indeed, well managed, this screeching sound has the particularity of adding a bit more dynamic relief to "trashy" sounds, providing the performance a more "organic" aspect, especially due to the accents produced by the pick. But just like with the first trick, you need to sub-mix this take wisely so that the listener doesn't end up discovering the trick.

Let's now look at two real-life examples of what this would look like with a realistic setup. Our first example will be a linear sequence without an effects loop, while the second will use an amplifier effects loop. It should be noted that many pedals themselves can host their own effects loop, so how you set it up is up to you. It functions the same either way.

Another great option if your budget for an acoustic is $500 or less is the BG 40 from Blueridge. It has a sitka spruce top with mahogany back and side. It features scalloped bracing for a clean and crisp tone. Owners describe it’s tone as loud and bassy, and compared the neck width to that of an electric. This could be a plus for those with smaller hands. This guitar also features a bone and nut saddle and East Indian rosewood fingerboard for smooth playability. Based on customer feedback, this is a great budget choice that won’t let you down.
As one user put it, this is one of “Amazon’s hidden little gems”, with a good set of tube electronics that gives out a natural sounding overdrive and some crystal-clear rhythmic sounds. If you want to make your guitar sound clear enough to accompany Porcupine Tree while also having the option for a natural grainy sound that might work well for jazz and blues, then this item is definitely something to look into.  
First, let’s start with the switch. Like the Gibson-style switch, the Stratocaster’s is used to select between different pickups and combinations thereof. In this picture of Jimi Hendrix and his Stratocaster, the switch is just above the knobs. It’s a little hard to see because of the white pickguard, but if you have this type of guitar, you’ll have no trouble finding it on your own instrument.
Immediately you can see that this unit is on the larger side, measuring 25 inches (63.5 cm) across, and weighing about 11 lbs (5 kg). If you’re concerned about portability, we noticed one of the most purchased items together with the HD500X is this case, which comes highly recommended and will keep your multi-effects pedal safe during transit and storage. The Line 6 POD HD500X itself has superb build quality. It has a very nice metal chassis, and heavy duty construction. The build quality probably doesn't get much better than this in a multi-fx unit (we say it is a step above the Zoom G3X). We won’t spend a ton of time talking about the inputs/outputs and controls available on the Line 6 POD HD500X, since you can very easily discern that from photos of it. We will say that of all the multi-effects pedals on our top 5 list, this is the most robust. The inputs/outputs cover above and beyond what you probably need. You’ve got your basic inputs and outputs, USB 2.0 so you can use it as a USB interface and for DAW integration, MIDI in/out/thru, FX send and return, AUX input, balanced XLR outputs, integrated mic preamp, and more. In short, however you want to integrate the HD500X into your bedroom, music studio, or live setup, there’s a very good chance you’re covered.
Fujigen Gakki began operation in 1960 as a classical guitar manufacturer, moving into the lucurative electric guitar markets in 1962. The company was the largest producer of Japanese guitars during the 1960-1980 period. They were known for producing high quality products, especially for the badged guitar market, which is why the company was selected by so many major American brands. It wasn't until 1970 that the company began making products for the venerable Ibanez brand, which was an unqualified success. Fujigen Gakki was the main manufacturer of choice for Greco badged guitars in the 1970 to 1980 period. They also produced guitars for major manufacturer Yamaha. Badged guitars made by Fujigen include Antoria, Epiphone, Jason and Mann. Badged guitars that may have been made by Fujigen Gakki were Marlin and St. Moritz.

{"product":{"id":"L20582","stock":"backorderable","price":"899.00","name":"Slash Firebird Limited-Edition Electric Guitar","download":false,"sku_id":"L20582000001000","checksum":"565047124900","rep_id":"site51500000000211665","displayId":"1500000000211665","sku_display_id":"1500000218333","sku_rep_id":"site51500000218333","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
For rehearsals, studio recording sessions, or small club performances, electric and upright bass players typically use a "combo" amplifier, which combines a preamplifier, tone controls, a power amplifier and a speaker (or multiple speakers) in a single cabinet. Combo amps come in a variety of speaker configurations, such as one speaker (e.g., often one 12" speaker or one 15" speaker, although there are some micro-amps with one 10" speaker) or two speakers (e.g., two 10" speakers) or four speakers (e.g., four 10" speakers). The dividing line between practice amps and combo amps that can be used for live venue shows is described in the power in watts section. The most powerful combo amps available deliver between 800 and 1000 watts to the internal speakers.
Double bass players performing in genres where the bass is slapped, either by pulling the string until it snaps back onto the fingerboard or striking the strings, such as traditional blues, rockabilly, psychobilly jazz, folk, and bluegrass often blend the sounds picked up by a piezoelectric transducer with the sounds picked up by a small condenser microphone mounted on the bridge. The microphone picks up the resonance coming from the body and the sounds of the strings being plucked, bowed, or slapped. The two sound signals are blended using a simple mixer and then routed to the amplifier. While many upright bass players use combo amplifiers, bassists in genres that use high stage volume, such as the punk-rockabilly genre of psychobilly use "bass stacks". Some jazz bassists and other bass players who play in small venues use specialized, expensive upright bass amps, like the Acoustic Image combo amplifier.
: : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! Hello, The Vox "plank" guitar I had was EXACTLY like yours! I don't have it now (January,2005). I sold it on eBay this last Spring on Ebay to a collector that works at Warner Bros. studio. He bought it for $460.00 !! There were a few bidders, so I would hang on to that 1950 skiffle guitar if I were you. They are very RARE! Peace! Rory
{ "name": "Walnut", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Walnut-1500000014893.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "11-20-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014893", "shipToStore": true, "displaySku": "J40301000005000", "displayId": "1500000014893   POS #: 112318365", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000005000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Walnut", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
The difference extends far past just the look and feel.  Roundwound strings have a shorter life, create more string noise, and wear on your frets more, but feature a brighter tone, longer sustain, and lower tension.  You'll also hear more harmonics and be able to grip them better for bending and finger picking.  Flatwounds last longer and have a warmer sound... pretty much the opposite of what we listed for roundwound's.
{"pageName":"[gc] vintage: kingston","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"martin","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
This is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal as opposed to using transistors. A vast majority of vintage guitar amplifiers use tubes, which help to give them a warmer, sweeter tone. They are available in combo amps and in amp heads, which then require an external speaker cabinet to produce sound.
What our panelists didn’t like about the Spider Classic 15 is the weird operation of its controls. Because Line 6 uses digital processing to model not only the basic sound of different amplifiers but also the way all of their controls work, whenever you switch amp sounds, the operation of the tone controls shifts radically. Thus, when you go to turn the treble down just a smidge, the sound of the amp changes quite a bit, and you have to spend some time experimenting to find the treble setting you want—or even get it back to how it sounded before you touched it. It also automatically adds reverb and perhaps a bit of chorus effect whenever you switch to the Clean sound; to shut off this effect, you actually have to use the effect knobs to turn the effect on, then turn it off again.
Launch price: $4,200 / £3,235 | Body: Mahogany with carved figured maple top | Neck: Mahogany | Scale: 24.594" | Fingerboard: Rosewood | Frets: 22 | Pickups: 58/15 LT Treble humbucker, 58/15 LT Bass humbucker | Controls: 2x volume, 2x tone (with push-pull coil-splits), 3-way selector switch | Hardware: PRS two-piece bridge, Phase III locking tuners | Left-handed: No | Finish: McCarty Sunburst, McCarty Tobacco Sunburst, Orange Tiger, Trampas Green, Violet, Antique White, Black, Black Gold Burst, Blood Orange, Champagne Gold Metallic, Charcoal Burst, Emerald, Faded Whale Blue, Fire Red Burst, Frost Green Metallic, Gold Top, Gray Black
Electronics kit building kind of fell out of favor during the computer age as the home based technology enthusiasts moved to assembling PC’s, and software development. But home brew electronics has enjoyed a resurgence in recent years in what is now called the maker community. Internet electronics stores such as Adafruit and Element 14 are enabling 21st century geeks to build anything from simple circuits to complex embedded computing projects. These sites provide documentation, tutorials, video channels, and of course, a store, where you can purchase the tools and components required to internet enable your toaster, or feed your cat from the couch.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: first act","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"first act","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

FuzzPlus2 is an update of our popular free download Fuzz+. The basis of the plug-in is a transform model of a famous vintage fuzz pedal. There are four controls: Fuzz knob: This controls, as you might imagine, exactly how much fuzz is applied to the signal. Tone knob: This controls the brightness of the distorted signal. Output knob: This is the output volume of the device, when it is active. Bypass button: This works just like the switch on a stomp box. When the blue light is lit, you're money. When it's not, the input is passed directly to the output. This can be automated for a slightly different vibe than automating the effect bypass of your host. free vst plugin.
In the world of amplifiers, there are amp stacks and combo amps. For beginners, a combo amp is usually the way to go, since they combine the amp circuitry and the speaker together into one unit. Check out models like the Marshall MG Series MG30CFX 30W 1x10 Guitar Combo Amp and the Fender RUMBLE 25 1x8 25 W Bass Combo Amp for a few examples of this type. For the biggest professional setups, on the other hand, a combo amp may not be quite beefy enough. That's where stacks come in, based on a head (such as the Peavey 6505+ 120W Guitar Amp Head) paired up with a speaker cabinet. You can even find some pre-made amp stacks here, like the Line 6 Spider IV HD150 150W and 4x12 Guitar Half Stack, to save you the legwork of shopping for both parts separately.

Repair body wings. These wings form the main body shape and may have been broken by dropping the guitar or other damaging methods. If you do not properly glue in the wings you will need to use extra caution as to not break the bond. Repairing wings or any body wood is rarely necessary, especially on a thick guitar body such as a Les Paul Standard. It may be needed on a smaller bodied guitar much like a Les Paul Junior.
If you’re making the crossover from electric to acoustic, then Takamine won’t be a particularly well known brand to you, but rest assured that they’re a top make when it comes to acoustics, and of course electric acoustics. The GN93CE-NAT is a mid-range electric acoustic that features some really nice touches, such as the rosewood fretboard, and is an interesting choice.
Yamaha is one of those names that you don’t often see outside the realm of keyboards and digital pianos. While their footholds in fairly limited on the stringed instruments market, their quality is well known. Yamaha builds some of the most balanced and best performing electric guitars in their respective categories. That is simple the truth. Now, they might not be as popular as other brands, but that is a whole different story.
Sparkle works best in the background and will be more suited to non-guitar players that want quality sounding guitar rhythms, but not have them be the focus or overly complicated.  Most guitarists will find it too rigid and write it off, where non-guitarist will want to spend a decent amount of time mastering the expression options. The GUI is geared to key players, but it’s simply fantastic looking, clean, and easy to use even if you can’t play keys that well.
Three full steps from standard tuning. Used by Dream Theater, Adema, Asking Alexandria on From Death to Destiny and The Black, Boris, Cannibal Corpse, Morbid Angel (on several songs starting with their album Covenant), Father Befouled, Sepultura, Jeff Hanneman of Slayer (on "War Zone" and "Here Comes the Pain" from God Hates Us All and "Not Of This God" from World Painted Blood. Kerry King used a 7-string for those songs), Mutoid Man (Stephen Brodsky started using the tuning during the recording of the Helium Head EP to fill in the low end of the sound, in an attempt to make up for their lack of a bassist at the time), American Head Charge, Nickelback (on "This Means War" and "Gotta Get Me Some" from " Here and Now" and Nevermore (when band switched to 7 strings).
This guitar needs love. It is in used condition with the biggest flaw being near the input jack.  This is the super rare RT series that were only produced for a couple of years and it is MIJ. Has tremolo but no arm If you are reading this, then you know what these are about.. I am the second owner of this guitar. Was bought from a guitar shop locally in San Jose, CA. No returns please

The Thunderhead guitars would be offered until June of ’72, with several model designation changes along the way. In ’70, the K-1360 became the K-1213, and in May of the following year changed again to the K-1233. At the same time, the vibrato-equipped models also changed, the K-1460 becoming the K-1214 and then the K-1234. The Tornado lasted until the end in January, ’73, but also went through the model number changes along with the Thunderheads, the K-1160 becoming the K-1211 and then the K-1231. The vibrato Tornados went from K-1260 to K-1212 and then K-1232.
We've had a thread here in the last couple months about Squires, with some pretty discerning forum members praising their quality and tone. You don't need to spend a lot of money these days for a good guitar. The one the OP bought was years ago. The fierce competition in the guitar market since the economy went bad, has forced manufacturers to up their game, and recent production is of a much higher standard.
Daisy Rock? Sounds like guitars for girls or something. It is! Daisy Rock is a company dedicated to empowering girls and young women and giving them the resources they need to learn to play the guitar. They have starter, short-scale acoustic guitars for little girls, and some really cool electric guitars in the shapes of hearts, butterflies, and flowers.
This is why I’m nervous when I see a free guitar plugin that actually wants to replace a guitar, which Cute Emily Guitar attempts to do. Now, Cute Emily is the most guitar-sounding of the bunch, but it also has the least amount of controls. This gives you a relatively singular sound and while I commend Big Cat efforts, I stopped using this free electric guitar plugin faster than I did the others.
You planned out your hardware but it is best to make the purchase after you know you have the body and neck built and made sure they will fit together. If you have made it to that point, you are ready to put in the hardware components. Realize that you may need to do some basic soldering. If you need some guidance in that area, you can get it in a free course on metalworking.

The more difficult nut to crack in emulating the full drive train of a modern guitar is the instrument itself. That breaks down into two categories -- acoustic and amplified. VSTs and the gear that emulate the performance logic and physics of a guitar can get close to an acceptable reproduction of acoustic instruments but that last mile will be a hard gap to close. That's because the resonate bodies of most instruments -- especially stringed instruments -- are shaped differently than speakers. The materials, the inertial matrix, they're just not the same. The resonance of a stringed instrument originates at a single point of impact with the string, much as a speaker's sound originates at a sort-of single magnetic point, but inertia carries the vibration of a bowed or plucked string through a 3D body to produce 3D acoustics that cannot be exactly matched with a forward facing speaker -- or by speakers facing front and back. Close, but no exact match. We might argue that speakers can render sounds closer than a human ear can detect, but nuanced vibrations picked up in the bones and fluids of the human body could arguably betray a difference.
If your instrument receives regular maintenance, then you are likely to avoid any unneeded guitar setup cost. A properly cared for guitar will be regularly cleaned, oiled, and treated gently at all times. Of course, this is not possible for all people, as their preferred style of music may negate the ability to treat a guitar gently (metal and punk are good examples). Having the guitar setup can be thought of as maintenance in itself, as it is an invariable need in environments that have inconsistent weather patterns (which would be virtually all of them). The cost of a guitar setup can be insignificant if you maintain it on a regular basis.
Another way of categorizing bass equipment manufacturers is by which part of the market they are targeting. While Peavey and Yorkville products are aimed at the generalist mass market, some bass equipment manufacturers, such as Acoustic Image or Walter Woods make expensive "boutique" equipment that is aimed at a niche market within the professional musician market. Acoustic Image amplifiers and speaker cabinets tend to be used by professional acoustic folk and jazz musicians, and Walter Woods amplifiers are associated with professional acoustic jazz bass players.
On some amps with a number of input and output jacks, the jacks may be consolidated in a patch bay. Some amps have an input jack for a foot-operated switch which can be used to turn on an effect or switch to a solo channel. Some higher-end amps have a Speakon speaker jack for an extension speaker. In the 2010s, the Speakon jack is often used in high wattage amplifiers, because the design of the connector, which is shielded from human touch, prevents electrical shock from a high-powered amplifier. Some amplifiers have a "tuner out" jack, for sending the instrument signal to an external electronic tuner. Bass speaker cabinets often have two 1/4" jacks. These are provided so that one speaker cable can be plugged into the first jack and connected to the power amp; if the bassist wants to use a second cabinet, a second speaker cable is plugged into the second jack and then into second speaker.
The first successful guitar pickup was developed in the early 1930’s by Rickenbacker® to help amplify Hawaiian lap steel guitars which were popular at the time. The first pickups were single-coils and while they do a good job of picking up the guitar signal they are also susceptible to picking up interference from nearby electrical devices. The Gibson® humbucker (US Patent 2896491) was developed in the 1950’s to eliminate the “hum noises” resulting from electromagnetic interference. The humbucker uses two coils and a pair of pole pieces (having opposite magnetic polarities of each other) for each string. The coils are wound and connected to each other in such a way that the current produced by the moving guitar string in the two coils adds up (in-phase), while the current produced by electromagnetic interference in the two coils cancels (out-of-phase). Not only does the humbucker drastically reduce noise from interference, but it also has a different characteristic sound. The single-coil pickup is commonly considered to have a thin, clear and bright (more treble) sound, while the humbucker is known to have a full, but dark (less treble) sound with more overall signal output.
In 1977, Gibson introduced the serial numbering system in use until 2006.[71] An eight-digit number on the back shows the date when the instrument was produced, where it was produced, and its order of production that day (e.g., first instrument stamped that day, second, etc.).[72] As of 2006, the company used seven serial number systems,[71] making it difficult to identify guitars by their serial number alone.[71][72] and as of 1999 the company has used six distinct serial numbering systems.[72] An exception is the year 1994, Gibson's centennial year; many 1994 serial numbers start with "94", followed by a six-digit production number[citation needed]. The Gibson website provides a book to help with serial number deciphering.[72]
The other US-based manufacturers were from Chicago Harmony (formerly owned by Sears), National-Dobro (Supro/Valco) and Kay. Chicago was the largest guitar manufacturing area of the US at the time. The only other manufacturer of Silvertones during this period was the Japanese-based company, Teisco (or Teisco Del Ray as it was formerly called). Teisco created some of the wildest designs for Silvertones, in our opinion. The earliest model was the TG1. This was the first guitar to incorporate an amplifier and speaker into the body of the guitar. Although some people look down on the Japanese guitars we think they've got some really interesting sounds and innovations not found on American made guitars.
It’s true that the best guitars are built from the inside out, and Vintage enjoys a well-earned reputation for building great vintage electric guitars. Working with acknowledged guitar industry guru Trevor Wilkinson, Vintage has created a fantastic line-up of Wilkinson-equipped Vintage electric guitars and basses. Using Trev’s excellent range of pickups, tuners and hardware has taken Vintage electrics to the next level.
Boss is an effects legend, but thanks to the digital expertise of parent company Roland, the brand now also has an amp that promises organic, valve-like tones at an impressively low price. It does this by using the same Tube Logic technology employed in last year’s 150-watt Waza Craft head, and other Roland amps. The K100 doesn’t invite direct comparison with specific amp brands and models. Instead, there are five generic voices: Acoustic, Clean, Crunch, Lead and Brown. You can pre-load 15 different effects types into the amp, with 55 to currently choose from when you link the Katana to the Boss Tone Studio application. The Katana may look plain, but its tones are truly exceptional. The Crunch voice is responsive and dynamic, while the Brown solo sound is as good as many USA valve-powered competitors. Start using the Tone Studio editor and the Katana’s edge becomes sharper still, with different effects chain presets and assignable control parameters.
I just built this kit, which I ordered directly from Mod DIY. Its the first pedal kit that I have built, although I do have a fair amount of electronics experience. Overall, I was impressed with the kit. All the parts were included, and functioned just fine. The instructions were outstanding, particularly if you use the high-res picture of the inside of a finished model for reference. There was ONE step omitted in the direction, which was to solder a short wire between terminal 3 of the toggle switch to connection 12 on the junction rail. But that was easy to spot.
Wow, didn't expect a budget-priced instrument to perform this beautifully! I had planned to use this as an introduction into nylon-string (from electric), then upgrade to a better (i.e. more expensive??) model. That won't be necessary! The NTX700C is absolutely perfect for me and will remain the nylon-string guitar in my stable. I am a professional solo jazz guitarist and ventured into a nylon-string for my Brazilian jazz set. Being an electric player, the transition with this model has been much easier than a traditional classical. The onboard electronics are great with my Bose L1 system. I have the cedar top, and the tone is very mellow, and already opening up with only three weeks of playing.
{ "thumbImageID": "RR100-Rocketeer-Electric-Guitar-Black/430928000001000", "defaultDisplayName": "Rogue RR100 Rocketeer Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51275425410275", "price": "99.99", "regularPrice": "99.99", "msrpPrice": "199.99", "priceVisibility": "1", "skuUrl": "/Rogue/RR100-Rocketeer-Electric-Guitar-Black-1275425410275.gc", "skuImageId": "RR100-Rocketeer-Electric-Guitar-Black/430928000001000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Burst", "sku": "sku:site51343059402614", "price": "99.99", "regularPrice": "99.99", "msrpPrice": "199.99", "priceVisibility": "1", "skuUrl": "/Rogue/RR100-Rocketeer-Electric-Guitar-Wine-Burst-1343059402614.gc", "skuImageId": "RR100-Rocketeer-Electric-Guitar-Wine-Burst/430928000003000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Blue", "sku": "sku:site51275425410278", "price": "104.99", "regularPrice": "104.99", "msrpPrice": "199.99", "priceVisibility": "1", "skuUrl": "/Rogue/RR100-Rocketeer-Electric-Guitar-Blue-1275425410278.gc", "skuImageId": "RR100-Rocketeer-Electric-Guitar-Blue/430928000004000", "brandName": "Rogue", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red Burst", "sku": "sku:site51343059402613", "price": "99.99", "regularPrice": "99.99", "msrpPrice": "199.99", "priceVisibility": "1", "skuUrl": "/Rogue/RR100-Rocketeer-Electric-Guitar-Red-Burst-1343059402613.gc", "skuImageId": "RR100-Rocketeer-Electric-Guitar-Red-Burst/430928000002000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
PRS really took off back in the ‘90s when it seemed just about everyone had swapped out their Les Paul for a PRS. Eventually they capitalized on this trend and made the PRS more accessible by introducing the SE line of lower-budget guitars. But these aren’t beginner’s guitars. Even though they cost less than a standard PRS, they’re still high-quality instruments.
{ "thumbImageID": "2017-SG-Faded-HP-Electric-Guitar-Worn-Brown/J46938000002000", "defaultDisplayName": "Gibson 2017 SG Faded HP Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Brown", "sku": "sku:site51500000029961", "price": "1,199.00", "regularPrice": "1,199.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Gibson/2017-SG-Faded-HP-Electric-Guitar-Worn-Brown-1500000029961.gc", "skuImageId": "2017-SG-Faded-HP-Electric-Guitar-Worn-Brown/J46938000002000", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Cherry", "sku": "sku:site51500000029960", "price": "1,199.00", "regularPrice": "1,199.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Gibson/2017-SG-Faded-HP-Electric-Guitar-Worn-Cherry-1500000029960.gc", "skuImageId": "2017-SG-Faded-HP-Electric-Guitar-Worn-Cherry/J46938000001000", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }