Many Rickenbackers — both guitars and basses — are equipped to be compatible with a “Rick-O-Sound” unit via an extra “stereo” output socket that allows the two pickups (or neck and middle pickup combined/bridge pickup, in the case of three pickup instruments) to be connected to different effects units or amplifiers. Another idiosyncrasy of Rickenbackers is the use of two truss rods (rather than the usual one) to correct twists, as well as curvature, in the neck.
When Schecter was first founded in 1976, the company’s original purpose was to produce replacement parts for other guitar manufacturers. In 1979, they produced their first guitar and it all took off from there. Today, Schecter is one of the highest rated guitar brands. If you’re looking for a guitar to play metal in particular, Schecter could be the brand for you. Schecter is well-known for their brutal heavy metal sounds. They have a decent range of models, including basses. Schecter’s arguably most famous guitars are the Hellraiser series. They are usually closer to $1000, but it could be worth it for you. When played correctly, the heavy metal distortions and gains that blast out of the amp is fantastic and if you’re a bit more gentle you can even get some softer sounds out of it. The same can be said with most Schecter models, but they favour heavy metal, so if you’re not looking to play heavy metal, you might want to look elsewhere.
© 2013 Ubisoft Entertainment. All Rights Reserved. Rocksmith logo,, Ubisoft, and the Ubisoft logo are trademarks of Ubisoft Entertainment in the US and/or other countries. The “PS” Family logo and “PS3” are registered trademarks and the PlayStation Network logo is a trademark of Sony Computer Entertainment Inc. Software platform logo (TM and ©) EMA 2006.
When Electric Guitars first hit the music market way back in the early fifties, they weren’t easily accepted by the people. However, later electric guitars became an integral part of the music industry throughout the world. The following article describes this amazing music instrument, which unlike its conventional counter-part, works on the laws of electromagnetism.
One problem with adding a tweeter to a bass speaker cabinet is that the tweeter may be damaged by the overdriven amplifier tone that is popular in some musical genres, since overdriving the amplifier adds a great deal of high frequency information to the signal. Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets produced by manufacturers such as Gallien-Krueger and Carvin and other manufacturers allow bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn, which prevents this problem. Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
There were also four full-sized archtops; the Model EP-14, Model EP-15, Model EP-17 and Model EP-18. These were basically all variations on the same guitar, with glued-in necks, non-dipped heads, mini-strip plastic inlays, single rounded cutaway, f-holes, adjustable bridge, trapeze tail and translucent pickguard. Rocker switches were mounted on a small plate on the upper shoulder, while the volume, tone and jack were on a small plate on the lower treble bout. The EP-14 (shaded mahogany) and EP-15 (natural) had two pickups. The EP-17 (shaded mahogany) and EP-18 (natural) had three pickups, some two-tone, some flat rectangular metal-covered.

Absolutely love this guitar!! One great instrument for a great price. Ordering was easy and delivered before projected date. I am no professional by any means, but as I've progressed, I wanted a guitar I could grow with and play for years to come. This is it!! I've played a lot of acoustics ranging from Gibson to Taylor but absolutely love this Martin. The action is like butter and coming from the Martin collection, the sound and tone is at a minimum of FANTASTIC!! If you are looking for an outstanding piece of musical magic to add to your collection, or something to purchase to have for a lifetime without spending your life savings to obtain it, this is the one you are looking for.
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: palmer","pageName":"[gc] shop by brand: palmer","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop by brand: palmer","prop1":"[gc] shop by brand: palmer","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"palmer","prop5":"[gc] shop by brand: palmer","prop6":"[gc] shop by brand: palmer","prop3":"[gc] shop by brand: palmer","prop4":"[gc] shop by brand: palmer","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section"}
While tone and volume should be your foremost considerations, you should also determine what extra features you really need. Built-in effects are great if you want a no-hassle, all-in-one package, but they may not be as flexible as external effects pedals and processors. An effect loop is useful for effects like digital reverb and delay, but it’s not essential if your effects consists of a few stomp boxes. Line outputs with speaker emulation are helpful for home recording, and external speaker outputs are great for expanding your live rig.

• I like to insert a compressor after this, to add some sustain and even out the guitar's dynamics, for a more consistent distortion sound. So for the second insert slot, choose Dynamics/Vintage Compressor, then click on the insert's Edit button to see the compressor's interface, and set up the parameter values as desired. A good starting point would be Input at 17 and Attack at 8.9, with Punch and Auto set to On. You'll probably need to adjust the Input (effectively the Threshold in this case) according to the level of signal coming into the plug‑in. Set the Output to a level that's as high as possible, but doesn't approach clipping.
This multi-effects pedal lets you setup your virtual rig with up to five effects that include various modulation, distortion, compressor, delay, reverb and other effects. They can also run alongside the Zoom G1Xon's built-in amp modeling, which lets you choose between 22 different amps. Those are a lot of features in a small unit, thankfully Zoom implemented an interface that makes tweaking and configuring easier. As expected although you are still limited by two footswitches, it comes with an expression pedal, which adds even more to its value and usability.

It’s best to perform pickup adjustments while playing through a clean amp. You can more accurately hear the true tone and volume of each pickup when the signal isn’t being compressed or overdriven by a cranked amp or pedal. Listen to the tone of each pickup position, and try to balance the height of each pickup until the volume remains relatively the same when changing pickup settings.

Minnesota Public Television has a wonderful program called Minnesota Original ( features artists, artisans and musicians in Minnesota. Recently they did a feature on me and Tim Sparks.  I am very excited and honored.   I hope you will tune in , or at least look at the segment on their web site.
In the early 1980s Collings decided to move to San Diego, California but never made it further than Austin, Texas.[3][4] He started out sharing work space with fellow luthiers Tom Ellis, a builder of mandolins, and Mike Stevens. A few years later he decided to continue on his own and take the craft more seriously, moving into a one-stall garage shop.
Foden: In 1912 to 1917, Martin made guitars for concert guitarist William Foden. These are similar to the standard Martin models, but have simple soundhole rings and a 20 fret fingerboard (instead of 19). Made in sizes 0 and 00, the styles were similar to Martin's Style 18, 21, 28, and a pearl trim model. Only 27 of these guitars have been documented to date.
And its not just about the looks, because this affordable guitar comes with a solid spruce top with mahogany back and sides. This means that you are getting a mid-tier instrument for the price of an entry level guitar, a beginner guitar that will grow with you as your ears become sharper and you learn to play better. Because of its conventional build, this acoustic has a warm and balanced tone that can sound bland to some, but it should make for a great starting point for those who are still discovering their own musical voice.
I agree with play with effects if you want to, they're a lot of fun. I do think playing with distortion and practicing with it on is a good idea. I don't think it's a good idea to practice with distortion all the time. It will mask a lot of mistakes and imperfections in your technique. If you can play something in a clean tone perfectly, it will sound that much better when you add effects. – Tony May 3 '13 at 20:09
One look around our shop and you'll see that we're serious about offering our customers a large selection of instruments, equipment and gear. You'll find both new and used instruments, and our top-notch staff are here to help you choose exactly what fits your needs, preferences and budget. If you're interested in learning new skills and techniques, check out the group workshops we host on a regular basis. We cover a wide range of music topics, so stop by and see what class we're holding next. Can't make it in? Give us a call at 505-889-6300, and we'll be happy to answer all your questions.

Washburn started in Chicago in 1883. They manufactured guitars and various other string instruments. Now they’re a division of the US Music Corp and owned by JAM Industries USA, but they continue to produce quality guitars. In the beginning, they mostly focused on banjos and mandolins. Starting in the 80s, they branched off into producing signature guitars. Now days they make a wide variety of instruments and are very beginner friendly. Washburns are made from fine-quality wood. This means they can get pricey. But the quality the solid wood offers is well worth the price increases. They’re a decent american company that make very consistent instruments. 
The K161 Kay Thin Twin electric guitar was originally introduced in 1952 and was known as the "Jimmy Reed" or "Howling' Wolf" model. "T-Bone" Burnett played a Thin Twin with Robert Plant and Alison Krauss at the 2009 Grammy Awards. The Thin Twin was the first guitar that was able to create that unique Blues sound. The special Kay interior bracing made the instrument a favorite among Blues players as well as rockers of the '50s and & '60s. The hand-wound pickups and separate center chamber allowed an extra biting natural distortion without feedback. The combination was a mellow clean gritty sound with natural sustain. The pickups are so hot that they needed to be contained in the center chamber, which is why the Twin Thin and Pro Bass made anyone who played it feel there was nothing else like it. The Pro Bass had a unique feature of a switch that cut off the high frequencies to reproduce an "upright Bass" sound but in the off position the Pro Bass gives a punchy Jazz sound. The Pro Bass comes with electric flatwound bass strings.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: davison","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"davison","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Anyone who wants a guitar that can handle both the expected twang and bluesy yield of a traditional Tele, along with the hard rock and punch of humbucking pickups will find a rather ideal companion in this guitar. I like it for studio guitarists in particular since it gets you a professional brand along with a wide range of tone capability that can help you be more accommodating to clients.

While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally.

Now, imagine having that same signal but with your guitar’s volume on its half way setting. That same degraded signal comes out even worse as it only had half of the voltage to work with from the get-go. In order to minimize the amount of signal loss, it is always suggested that the guitar’s volume is kept at its max setting and either manually adjust the output level from the amp or better yet, from a dedicated volume pedal, as is the choice for most professional musicians. A volume pedal in an effects chain will control the output volume of everything that is placed before it, so it’s pretty much almost always a good idea to place it at the end of the chain if it’s going to be your main form of overall volume control.

Mid-to high-priced amps may have other switches (which on some amps are switched on by pulling an existing rotary knob out) that boost or cut some part of the frequency range, such as "bright boost", "deep boost" or "mid scoop" switches. Amps with an onboard audio compressor or limiter, which is used to protect the speakers from sudden peaks in volume and from damage due to power amplifier clipping, may have only an on/off switch to turn on the effect (as with lower- to mid-priced amps), or they may have one or more knobs to control how much compression is applied to the bass tone (typically a ratio and threshold knob or just a single knob). Some 2000s-era amps may have an electronic tuner and a mute button, to mute the sound of tuning during a break between songs without having to change the volume settings. On some amps, vertical sliders may be provided to control a graphic equalizer, which gives the bassist control over a number of frequency bands.
“But I was recently talking to a guy at Yamaha who told me the total global revenue from musical equipment sales sold round the world doesn’t add up to one-thousandth of Apple’s AAPL, -1.42%   daily turnover. It’s a small specialist market,” Hook said. “Gibson guitars are expensive and they have been taken over by so many cheap copies. That’s what has caused a lot of harm to such a luxury product.”

For instance, the guitars that have a solid body are the most numerous out there. These models are as sturdy as they come, but they do not offer one plenty of resonance and sustainability. If you are interested in a design that mimics the figure of acoustic units, then you should pay attention to those guitars that have a hollow body. These products are able to deliver plenty of resonance, but they might not be of great help when it comes to feedback.

The Indiana Thin Body Acoustics give you all the sonic punch you need but in a more compact body size. Starting with a spruce top that's matched to mahogany back and sides, the I-TB2 Series were created for acoustic players that find that a traditional dreadnought body size is a bit too bulky. Having a tighter profile gives these guitars and almost electric guitar feel and they're perfect for the stage or studio. Great action and playability right out of the box! An on-board 3 band EQ gives you total control at the touch of a button and all players love the extended cutaway for upper fret access. Sealed diecast tuners, nickel silver frets, gold hardware, high gloss finish and 10 Year Warranty make the Indiana Thin Body Acoustic series a great alternative for any player.
This is another incredible right handed electric guitar from Cort guitars. It mostly comes in red color and has 6 strings. It has its body made of agathis and fret board from rosewood. The fret board is composed of up to 24 jumbo size frets. It is a sassy looking guitar that is quite affordable, with prices ranging from INR 9,999 to INR 10,050. Click below to get more information on the product.
{ "thumbImageID": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "defaultDisplayName": "Sterling by Music Man S.U.B. Ray4 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Black Rosewood Fingerboard", "sku": "sku:site51378221681150", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard-1378221681150.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Satin Walnut", "sku": "sku:site51331921974523", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Walnut-1331921974523.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Walnut/H82042000002000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mint Green", "sku": "sku:site51358268440972", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Mint-Green-1358268440972.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Mint-Green/H82042000004000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Satin Blue Rosewood Fingerboard", "sku": "sku:site51378221681125", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard-1378221681125.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard/H82042000006050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

When jazz guitar players improvise, they use the scales, modes, and arpeggios associated with the chords in a tune's chord progression. The approach to improvising has changed since the earliest eras of jazz guitar. During the Swing era, many soloists improvised "by ear" by embellishing the melody with ornaments and passing notes. However, during the bebop era, the rapid tempo and complicated chord progressions made it increasingly harder to play "by ear." Along with other improvisers, such as saxes and piano players, bebop-era jazz guitarists began to improvise over the chord changes using scales (whole tone scale, chromatic scale, etc.) and arpeggios.[2] Jazz guitar players tend to improvise around chord/scale relationships, rather than reworking the melody, possibly due to their familiarity with chords resulting from their comping role. A source of melodic ideas for improvisation is transcribing improvised solos from recordings. This provides jazz guitarists with a source of "licks", melodic phrases and ideas they incorporate either intact or in variations, and is an established way of learning from the previous generations of players.
Here we have a well aged Vintage Washburn D12/br from 1989 its a D-18 type with a cedar top and man does this cedar top sound great…it was surprisingly sound and deep for a late 80s it has a mature balanced tone…I like it with its pretty good bass response and all. Its structurally great no cracks and no playability issues what so ever its neck and alignment integrity is also excellent as the action is good and the guitar is as a result easy to play. Cosmetically this guitar has been around the block its no sissy its stood the test of time and its previous owner and still all in all with all its obvious nicks and scratches and various doinks man it looks pretty darn vintage COOL and I loved it I thought you might like it too just take a good look for yourself if your the type that likes a well warn in vintage guitar and you don't really mind that it has some extra character and soul this just may be a guitar you might appreciate….. its own beauty from life playing and enjoying the music experience this guitar has been well loved and played yet it is no where near warn out it has years of life left in her she just wants to really sing for someone and in my assessment she’s ready to be enjoyed for another 30 years or more! Very cool vintage Washburn Dreadnought guitar. Its neck is straight and has the proper relief its Tuners are real good sealed gears and doing an excellent job to this day, This one has the medium slim taper neck with the Diamond volute like the old Martin style…nice touch Washburn. Mahogany Back and sides and neck with rosewood fingerboard its neck width is 1-11/16ths at the nut. This a a well built good player folks if you don’t mind it not being exactly mint cosmetically its actually beautiful in its own vintage appeal. Any questions or to make the purchase you can contact Joe at:
Even if you are on a budget, it’s always worth looking in the higher price brackets and considering something a little more expensive, which will offer better sound quality (which is always encouraging), better build quality (usually more comfortable to hold and play), looks cooler (which will keep you motivated), and will last you longer – allowing you to grow with the guitar. It’s best to buy at the top end of what you can afford. For additional inspiration, make sure to check out this electric guitar list.
The body of the instrument is a major determinant of the overall sound variety for acoustic guitars. The guitar top, or soundboard, is a finely crafted and engineered element often made of spruce, red cedar, redwood or mahogany. This thin (often 2 or 3 mm thick) piece of wood, strengthened by different types of internal bracing, is considered the most prominent factor in determining the sound quality of a guitar. The majority of the sound is caused by vibration of the guitar top as the energy of the vibrating strings is transferred to it. Different patterns of wood bracing have been used through the years by luthiers (Torres, Hauser, Ramírez, Fleta, and C.F. Martin being among the most influential designers of their times); to not only strengthen the top against collapsing under the tremendous stress exerted by the tensioned strings, but also to affect the resonation of the top. Some contemporary guitar makers have introduced new construction concepts such as "double-top" consisting of two extra-thin wooden plates separated by Nomex, or carbon-fiber reinforced lattice - pattern bracing. The back and sides are made out of a variety of woods such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is chosen for its aesthetic effect and structural strength, and such choice can also play a significant role in determining the instrument's timbre. These are also strengthened with internal bracing, and decorated with inlays and purfling.
Reverb is a sound effect used both in music and audio engineering, which adds a spatial dimension to the original track. To put it into more simple terms, a reverb gives you an impression that the sound is originating in a large room. You are hearing the source sound but also its numerous iterations as it bounces off different surfaces. Reverb guitar effects pedals offer a simulation of this phenomenon.

Electronics kit building kind of fell out of favor during the computer age as the home based technology enthusiasts moved to assembling PC’s, and software development. But home brew electronics has enjoyed a resurgence in recent years in what is now called the maker community. Internet electronics stores such as Adafruit and Element 14 are enabling 21st century geeks to build anything from simple circuits to complex embedded computing projects. These sites provide documentation, tutorials, video channels, and of course, a store, where you can purchase the tools and components required to internet enable your toaster, or feed your cat from the couch.
Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  250K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.
Guitar amp and FX plug-ins are very advanced nowadays to the point that you can actually record “clean” by plugging your guitar straight into a mixer or interface, and add a plugin like Guitar Rig, Amplitube or Waves GTR as an insert. You will hear this effect as you play but without any risk of feedback, since no mics are live in the room. This approach also means you can tweak and change any aspect of the sound post-recording since the raw recording is actually completely dry.
The amps are interesting and also pretty much impossible to I.D. These were, of course, tube amps. Their basic cosmetics consist of two-tone tolex or vinyl covering � contrasting dark and light � arranged vertically with a wide band in the middle, just slightly narrower than the grillcloth. Cabinets had rounded edges, and, in fact, sort of look like ’50s TVs. One was a small practice amp, with two medium sized amps about 15″ or so high, and one humongous amp, complete with six 8″ speakers (which looks like the later HG-8).
In 1952 the pickup selection circuit was modified by Fender to incorporate a real tone control. Between 1953 and 1967 the neck could be selected alone with a pre-set bassy sound and no tone control, in the middle switch the neck could be selected alone with the tone control and finally the bridge could be selected with the tone control. Although this provided the player with a proper tone control, this assembly did away with any sort of pickup combination. Eventually from late 1967 Fender again modified the circuit for the final time to give the Telecaster a more traditional twin pickup switching system: neck pickup alone with tone control in the first position, both pickups together with the tone control in the middle position and in the third position the bridge pickup alone with the tone control.[2]
Have you ever looked at a guitar and wondered, "How do they make that?" Or thought to yourself, "I bet that I could build my own guitar," but never actually tried it? I have built several electric guitars over the years and through trial and error have learned many helpful tips that anyone who might want to tackle this sort of project needs to know before starting out. This kind of thing does require some wood working skill and also requires some specific tools as well but not all the fancy stuff that a guitar manufacture has. Building an electric guitar is time consuming and requires the completion of several steps before your project gets finished but be patient and you'll be happy with the results. I tend to go into detail so as not skip any steps or tips you need along the way, and use pics from other projects that I did as well so you can get more that on reference. If you set out to make a guitar you'll find that it takes quite a bit of time so you'll have time enough to go back and read other info if you just want to skim through the first go round. So I hope this helps all the future guitar builders out there!
Run a length of wire (approx two feet is usually plenty) through the jack mounting hole and down into the cavity. When you see the wire in the cavity pull it up through the F hole. Make sure the wire is long enough for one end to stick out the jack hole, and the other to stick out the F hole. Tape the jack hole end of the wire to the guitar with masking tape, or tie it to the strap button. This will ensure it doesn’t fall through the jack hole while you’re working on the other end.
{ "thumbImageID": "Vintage-G-400-Electric-Guitar-Worn-Brown/518669000008000", "defaultDisplayName": "Epiphone Vintage G-400 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Brown", "sku": "sku:site51275761455112", "price": "349.00", "regularPrice": "349.00", "msrpPrice": "582.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Vintage-G-400-Electric-Guitar-Worn-Brown-1275761455112.gc", "skuImageId": "Vintage-G-400-Electric-Guitar-Worn-Brown/518669000008000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Cherry", "sku": "sku:site51275761455214", "price": "349.00", "regularPrice": "349.00", "msrpPrice": "582.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Vintage-G-400-Electric-Guitar-Worn-Cherry-1275761455214.gc", "skuImageId": "Vintage-G-400-Electric-Guitar-Worn-Cherry/518669000324000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
  	Although not as dominating in amp modeling, Guitar Rig takes the top spot in our guitar effects software list. It leads the pack with its meticulously detailed effects modeling. Its 54 modeled effects closely follow the behavior of legendary stompboxes and studio racks. Even professionals are having a hard time picking out the real pedal against this guitar effect software in a blind test. Its versatile design allows you to chain effects together in virtually any manner, without the hassles of cables, space and budget constraints. It is truly a truck load of gear in one software package. Retail Price: $199.00

There aren’t a lot of professional reviews of inexpensive amps, but James at Guitar Verdict raved about the Champion 20, saying, “For an amp of this price, the Fender Champion 20 watt offers a massive amount of value,” and calling it “a hard to beat offering.” At last count it had earned an average of 4.6 out of 5 stars in 595 Amazon user reviews and earned an A for review integrity from FakeSpot.
Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, Diecast, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Amber, Red
By moving up or down one level, in terms of magnetic strength, you can usually add or subtract a little edge from a pickup. If your guitar is too tangy, moving down one pickup level (e.g., from alnico 4 to alnico 2) may smooth it out. If you want to add bite, go with a slightly stronger magnet—like, alnico 5 to a ceramic magnet. The good part is that magnets are both easy to find and inexpensive in comparison to buying a whole new pickup.

There are two distinct kinds of transistors used in fuzz pedals, germanium and silicon. In the early 1960’s silicon transistors were fairly new and very expensive and germanium was the norm. Germanium transistors are susceptible to temperature changes and noise so they can be unreliable at times. They do have a very distinct tone, they also react very well to the guitar’s volume knob by cleaning up very well. As silicon transistors became less expensive they largely replaced their germanium counterparts in pedals due to their stability. The Silicon fuzzes generally produce more gain but often don’t clean up as well.
SolidBody (2008) – Taylor’s take on a traditional solid electric guitar. Made from a solid slab of wood with cavities only for the pickguard or direct mounted pickups, and the bridge. Designed from the ground up, each SolidBody model features solderless pickups or a solderless pickguard which permit for musicians to effortlessly change the sound of their guitar. The SolidBody line is fully customizable with a wide combination of wood, colors and electronic configurations, and single or double cutaway options which enables anyone purchasing a SolidBody to get the sound and look that they want. All options are available for customization through Taylor’s SolidBody Configurator on the Taylor website.

There are of course, other buttons and positions featured on guitars. BB king’s Lucille had a switch to toggle different values for R11 (thus going from moody chords to punchy ‘Lead’ with a finger and no need for extra gear). Advanced guitars may have phase and antiphase switches for humbuckers or dual pickups. The jackson 5 Telecaster I think is an example as it has both a phase and anti-phase wiring on their pickup selector.

I won't lie, I was VERY skeptical ordering this. But I figured that isfits not great, I could sell it. After getting it, this package is amazing for the money. I am definitely keeping it! I own/have owned $5,000+ models and some $100 "disposable" axes and I was shocked at this beautiful guitar. First off, the flamed top is gorgeous. It doesn't have a cheap look to it. The fret board is so so but you cant expect too much here. The frets don't have sharp edges and nicely done. The sealed tuners are smooth and after a minute of the inital tuning (with the included chromatic tuner), I played it for a few hours and it kept proper tune. The overall tone of the guitar is warm and projects well. I got absolutely no rattle or vibration. Then I plugged into the included amp. I will admit, the amp isn't great but but its a free practice amp. So I plugged into my Peavey and sounds awesome. It also came with a so so gig bag, few picks, a strap, a truss rod key, sorta cheap guitar cord, an extra set of strings, and batteries for both the tuner and for the preamp on the guitar. Speaking of that, its a 3 band EQ with a gain control, volume and a battery checker. I paid $140 for all of this and I will say that this is one of the best deals I have gotten in almost 37 years of me playing. If you want a good practice guitar and can even play a show, don't pass this one up. The guitar alone is worth 3x of what the whole package costed me. I think I'll check out more Glen Burton guitars.
Of course, the effect is not as good as using a professional studio but most users report that reproduction is very good for a simple computer application. The interface of Guitar Rig is extremely well laid out and even for those new to amps and guitar effects, it doesn't take long to navigate your way around. If you intend to use Guitar Rig for live performances, a convenient Live View displays the most essential readouts and level monitors to keep your eye on.
As we mentioned before, the first mass-produced solid body electric guitar was introduced in the early ‘50s as a way for guitar players to avoid getting that unwanted feedback that amplified hollow body electric guitars were infamous for. Today, there are countless solid body guitars to accommodate any type of player and price range—from beginner guitar players to seasoned pros playing genres spanning hard rock, country, blues, heavy metal, jazz, and more! Some of the most popular solid body electric guitars include the Fender Telecaster, the Fender Stratocaster, the Gibson Les Paul, the Gibson SG, the Ibanez RG, and the ESP Eclipse.