Later makes of fuzzes—and later generations of those above—moved on to silicon transistors. Many players found the silicon-based models a little harsher sounding, however, and the legend of the magical germanium transistors began to grow. Even so, plenty of guitarists get along just fine with the silicon variety. Eric Johnson, often credited with ears of canine keenness, has used a silicon-transistor Dallas-Arbiter Fuzz Face to drive the dirty rhythm of his famous multi-amped, multi-routed set-up. He also holds the unit together with a rubber band because he says the bottom plate’s central mounting screw affects its tone. Make of this what you will.
This guitar features two MP-90 pickups that can be switched on at the same time to produce sweet yet aggressive sounds. This guitar is mainly used to play country and indie music. This guitar has a radius of 9.5’’ and 22 medium jumbo frets for comfort and speed of play. It has a six saddle hard-tail bridge that allows precise settings and ease of adjusting string heights. The fingerboard is maple finished which makes for fast play. This guitar features three finishes sunburst, black transparent and vintage white.
Chorus pedals really made their mark in the 80’s with the likes of the Boss CE-1 and CE-2, the Electro Harmonix Small Clone and the TC Electronics Stereo Chorus. I found a nice definition of chorusing on Wikipedia: “Chorus pedals mimic the effect choirs and string orchestras produce naturally by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or “vibrato” to part of the signal while leaving the rest unaltered.” A chorus is a modulation effect but the modulation we hear is produced by delaying the wet signal a very short duration causing the doubling effect we hear. So it is actually a time based effect.
Continuing the example of making comparisons of specifications, there are Guilds in this price range that come with all solid woods, a rosewood fretboard, and with built-in tuners. Also, Epiphone Masterbuilt has solid wood acoustics, even some with cedar tops which are highly sought after by finger style players, plus they have a rosewood fretboard, a built-in tuner, two pickups and deluxe tuning machines. Moreover, both of the above guitars sell for less than the Taylor 200 series model you listed. So which is better?
Choruses (Chori?) come in mono, stereo, and true stereo versions, and a good one will provide lots of control across the depth and speed of the modulation desired. In the case of a mono unit, the aggregate tone produced by the circuit is flattened and passed through a single jack, where as a stereo (sic) unit will pass wet and dry signals through different jacks. A true stereo chorus unit will produce a true stereo signal, where the effect is mixed properly into left and right channels.

80/20 Bronze strings are a mixture of Bronze and Zinc.  They are also referred to as Bronze/Brass strings and are extremely common, much like Phosphor Bronze.  One of the main differences is this variety produces a very bright tone that enhances articulation and pick attack.   This effect can be lost very quickly depending on how much the player sweats and how often they clean their strings.  This choice can be a little more demanding on the wallet, due to having to change them more often.

These guys are the best in town! I had my Gretsch 6120 Upgraded with a new Pickup. They were quick and at a reasonable price. They do amazing work. They also have a great selection of guitars and Amps for sale. I highly recommend stopping by. If your looking for a new guitar for yourself or your kids they will help you find the perfect guitar for your price range. I highly recommend stopping by. They also do amp repair! Stop by and see for yourself.


Other high-quality specifications include a bone nut, a molded metal jack plate that is curved and makes plugging and unplugging a guitar cable hassle-free, retooled knobs, fretwire that is slightly smaller than what you’d find on most PRS electric guitars, and PRS’s double action truss rod (accessible from the front of the headstock for ease of use).
This is the point where the neck meets the body. In the traditional Spanish neck joint the neck and block are one piece with the sides inserted into slots cut in the block. Other necks are built separately and joined to the body either with a dovetail joint, mortise or flush joint. These joints are usually glued and can be reinforced with mechanical fasteners. Recently many manufacturers use bolt on fasteners. Bolt on neck joints were once associated only with less expensive instruments but now some top manufacturers and hand builders are using variations of this method. Some people believed that the Spanish style one piece neck/block and glued dovetail necks have better sustain, but testing has failed to confirm this. While most traditional Spanish style builders use the one piece neck/heel block, Fleta, a prominent Spanish builder, used a dovetail joint due to the influence of his early training in violin making. One reason for the introduction of the mechanical joints was to make it easier to repair necks. This is more of a problem with steel string guitars than with nylon strings, which have about half the string tension. This is why nylon string guitars often don't include a truss rod either.
One glance at this bad boy reveals just how accurate it is to the 1959 version. We are talking exact same tubeless truss rod assembly, aniline dye, exact same finish... everything. In terms of hardware, they went with a set of Klauson Deluxe tuners and period specific Tune-o-Matic bridge. The custom humbuckers were coiled and voiced to perfectly match the original PAF design from the late '50s which was done using Alnico III magnets and 42 AWG wire. The performance of this guitar is an experience that is rarely found out there.

We selected this guitar as our Top Pick because it’s an instrument that could suit anybody. It has everything you need from your electric guitar and it’s easy to play. A good classic that will stay with you for many years to come. It suits both beginners and guitarists who have been playing for a while. True, a professional guitarist would buy something pricier, but if you’re not super picky this guitar will do perfectly well!
For acoustic players, the Rogue Beginner Acoustic Dreadnought guitar with Accessory Pack comes highly rated. Included within this pack is Rogue's exceptionally crafted beginner acoustic dreadnought, along with a Musician's Gear Tubular Guitar Stand and premium Pearloid Celluloid pick, an Ernie Ball polish cloth, and 12 80/10 Bronze acoustic guitar strings. Overall, it's a worthy yet affordable pack for any budding guitarist. 

The design, while nothing particularly special, is clean and beautiful, which will help it appeal to most guitarists - the dreadnought acoustic body being one of the favorite parts. Ultimately, just about anyone could pick up this guitar and get what they need out of it, which is why it makes our top pick. We could recommend it to anyone, and when you talk about the price, it becomes even more attractive, because this is a high-end guitar for mid-range money.
I have a Dover, it was my great uncle’s guitar. It has seen better days but considering its age its in pretty good shape. Some one did some custom wiring inside so I had to replace the pots. One of the pickups was glued back together but it wasn’t done properly so now it doesn’t quite sit right. The plastic cracked at most of the corners where the screws hold the pick ups down.

here is an example of why an acoustic reigns supreme for practical reasons. Last week, I had to get new tires on the truck. Knew I had a couple hours to kill while there. the Discount Tire was on the way to my guitar teacher… in a big way (an hour drive up to Denver for guitar lessons, the Discount was half way there). So, I brought my acoustic in to Discount and played for a couple hours in the waiting room. People loved it, and were shouting out requests and stuff.
The beauty of an affordable small amp is that it can be high quality without the sacrifice of anything. I mean yeah some people say that the low tones disappear a little when the amplifier gets small, but don’t listen to them too much. Unless your low tones are being drowned out by some loud person screaming into the microphone so hard that the system starts screeching, even the smallest of amps can produce a respectable low tone. The small amplifiers are there to be portable and easy to have, so that you never have to deal with a back hurting (unless your instrument is heavy) or your arms being tired from anything other than playing the guitar too much. Which is why the Blackstar Fly 3 Battery Powered Guitar Amplifier is a great piece of equipment to have in your artillery. Portable, small and powerful in sound, what else could anyone ever want?
{"pageName":"[mf] pdp: epiphone thunderbird classiciv pro electric bass guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: bass: electric bass","prop1":"[mf] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[mf] shop: bass: electric bass: 4 string electric bass","prop6":"[mf] shop: bass: electric bass: 4 string electric bass","prop3":"[mf] shop: bass: electric bass: 4 string electric bass","prop4":"[mf] shop: bass: electric bass: 4 string electric bass","products":";H82691","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] product detail page"}
From the 1860s on, fan bracing became standard in Europe. Martin and other American builders including Washburn and others since forgotten (Schmidt & Maul, Stumcke, Tilton) used X-bracing instead.[3] The sound of X-bracing may be considered less delicate with gut strings, but it prepared the American guitar for steel strings, which emerged in the first quarter of the 20th century.
RARE Epiphone Vintage FT-150 Bard Lefty Conversion with bone saddle. Spruce top, rosewood back and sides. Medium to low action. Beautiful sounding and playing guitar. Superb projection. Rivals guitars costing thousands.In excellent cosmetic condition with normal fretwear for a guitar it's age, and tiny dings here and there but nothing that stands out and looks gorgeous. Includes original right-handed, adjustable bridge. Includes hard shell case and original right-hand adjustable bridge if you wanna convert it back to a righty!
peavey marshall bass tc electronic ampeg svt bass guitar laney ashdown mag ashdown cab carlsbro ashdown abm bass amp head marshall fender bass amp behringer peaveybassamp ashdown bass 4x10 bass cab sale sales roland bass amp speakers for bass amp combo peavey for sale guitar bass practice carlsbro amp fender ashdown head amplifier ampeg bass carlsbro bass bass guitar amplifier
Lutherie has been my life's work since the beginning. After graduating from Roberto-Venn School of Lutherie in 1992, I set up my first shop in a rental garage, and began designing, building, repairing, and restoring fretted stringed instruments. Aided and abetted by 13 years of employment as a staff guitar repairman at Seattle's Trading Musician, I gained an extensive knowledge of the inner and outer workings of a vast array of instruments.
Does anyone know anything about Palmer based Magnum Series PGA-65 guitar amps? I live in Costa Rica and bought one new from a music shop but with the amount of moisture here the original box was destroyed along with any manuals, paperwork, etc.. The amp says it is manufactured in China and is solid state. It is supposedly 65 watts with 2 channels, clean and dirty with EQ sections on both channels. It also has send and returns and a spot to plug in your Cd player, etc.. It has a big badge on the front saying Magnum Series, Palmer Guitar Company, Fl Usa. I didn't pay alot for it and for the price it is a decent sounding amp although I probably will replace the speaker with a Celestion.
This site aims to be a reference point for guitar players and guitar collectors. There's information, history, photographs and sound clips of many famous, and not so famous guitars and basses by makes such as Danelectro, Epiphone, Fender, Gibson, Guild, Gretsch, Hagstrom, Harmony, Hofner, Rickenbacker and Vox. There is a section on effects pedals too!
Original Martin OMs from approximately 1929 to 1931 are extremely rare and sell for high prices. Many guitarists believe that the OM—a combination of Martin’s modified 14-fret 000 body shape, long scale (25.4″) neck, solid headstock, 1-3/4″ nut width, 4-1/8″ maximum depth at the endwedge, and 2-3/8″ string spread at the bridge—offers the most versatile combination of features available in a steel-string acoustic guitar. Today, many guitar makers (including many small shops and hand-builders) create instruments modeled on the OM pattern.[5]
We’d recommend starting off with building a clone, or modifying a cheap pedal that you already own – This is why we see so many of the famed Boss DS 1 mods. A lot of the cheap “starter” pedals have a wide array of modifications that can be done. However, if you do not have an old effect pedal laying around, look into getting a pedal clone kit. I recently built a ProCo RAT Distortion Pedal Clone by General Guitar Gadgets, and these kits can really help you succeed in understanding how guitar pedals are built.
Installing pickups and wiring mods can be complicated, but learning to do common pot and jack repairs is almost more important, as they can save you time, money and frustration, especially before or even during a gig. That said, it can be daunting to know what to buy when jumping into the world of soldering, but for less than $80, you can have tools that will last for years.
Probably one of the greatest is Glenn Schwartz, formerly of the James Gang and Pacific Gas & Electric. Considered to be a "white" Jimi Hendrix, he was asked by Jimi to play at what was to be his last birthday party. Glenn played behind his back and with his teeth (now with his gums) before Jimi ever did. Now out of the limelight (and out of his mind) Glenn plays (and preaches) on Thursdays at a blue collar bar in Cleveland. ONE F*CKING INCREDIBLE PLAYER. Should be on any list.
If you’re making the crossover from electric to acoustic, then Takamine won’t be a particularly well known brand to you, but rest assured that they’re a top make when it comes to acoustics, and of course electric acoustics. The GN93CE-NAT is a mid-range electric acoustic that features some really nice touches, such as the rosewood fretboard, and is an interesting choice.
Planning for this review started right after the January 2018 National Association of Music Merchants (NAMM) show in Anaheim, California. We didn’t notice any significant introductions in the under-$200 electric guitar category during our time there, but new guitars can appear at any time. We’ll be watching out for them, and we’ll get our hands on them as soon as we can.
POLISHING Once you have completed the wet sanding you wil have a pretty smooth surface that is almost a dull shine. You can either hand polish the finish or use a polising attachment to buff it out. Stew Mac has a polishing pad that attaches to you drill. Or you can get 6" foam bonnets from an auto parts store that will fit over the sanding disk attachment you may already have. It is best not to use any thing made from cotton because it will cut through the finish. Stew Mac also has polishing compounds that you will use in order working you way down to the swirl remover. It's on the expensive side so I use McGuires polish that you can get from the auto shop. If you use a buffing attachment make sure that you uae a different attachment for each grade of polish. Don't use the same pad for each one. Also remember to wait 10 minutes after buffing before you wipe off the surface. The lacquer gets hot and soft after buffing so give it time to cool. You will have to hand polish the cutaways, don't attempt to use the buffer on the edges of the guitar or cutaways because you will burn though the finish.
Epiphone is to Gibson what Squier is to Fender. Meanwhile, the Les Paul is Gibson’s Stratocaster. Probably one of the most famous guitars on the planet, the Les Paul has been played by the likes of Slash, Jimmy Page, and Bob Marley. Epiphone, luckily, has made it available to the world with a price that won’t break the bank. And it’s an excellent guitar for those starting to play rock music.

A 5 way selector is commonly found on guitars with 3 pickups , a humbucker in the bridge , single coil in the middle and a humbucker in the neck. So the 5 way selectors job is to select only one or more pickups at a time to offer different sounds on the guitar. The way the selector is pointed will tell you which pickup is selected and this is common on guitars from all brands. The bottom position is your bridge pickup which is closest to where the strings begin , the middle position is all 3 pickups and the top position closest to the neck is your ....you guessed it neck pickup. The bridge pickup will offer heavier sounds if you play the right notes and the neck for soloing as the output (intensity) of the neck pickup isn't as powerful as the neck for a reason. The more you play the more you'll see uses for switching pickups on the selector. The tone knob on the other hand it depends on how you use it I know a lot of guys who are endorsed and so forth who never touch the tone knob or have guitars built without it , but used properly it can do a lot of stuff from Eric Clapton to Carlos Santana type stuff. you will also see a 5 way selector on guitars with two humbuckers this feature is called a mega or super switch depending on brand. It makes the pickups do different stuff but this feature is usually found on expensive guitars and keep in mind a 3 way blade switch looks like one but only goes in three positions. Bridge , middle and neck.


Description: Flamed 10-Top, Gold Hardware Model. Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Gold, 1x Volume Control, 1x Tone Control, 5-Way Switch, Locking Tuners - Pickups: Dragon II - String Instrument Finish: Blue Mateo, Ruby, Gold Metallic, Whale Blue, Dark Cherry Sunburst, Violin Amber Sunburst, Emerald Green, Vintage Yellow, Black Sunburst, Gray Black, Natural, Black, Amber, Tobacco Sunburst, Orange, Black Cherry, Vintage Natural
Jazz guitarists are not limited to single note improvisation. When working with accompaniment, chord solos are created by improvising chords (harmony) and melody simultaneously, usually in the upper register on strings 1,2,3 and 4. Wes Montgomery was noted for playing successive choruses in single notes, then octaves and finally a chord solo - this can be heard in his improvisation on the standard Lover Man (Oh, Where Can You Be?). When playing without accompaniment, jazz guitarists may create chord solos by playing bass, melody and chords, individually or simultaneously, on any or all strings - such as the work of Lenny Breau, Joe Pass, Martin Taylor and others. This technique can be also be incorporated into unaccompanied soloing: for instance Django Reinhardt's "improvisations", as he called his solo pieces.
Interesting cosmetics and great playing 4-string, Factory, but "custom re-built" Fretless bass. Appears to be re-finished. I had to buy this, as I recognized it immediately as a great "player", fretless bass. Adjustable P-J passive / dynamic pickup configuration sounds great. Separate volume and tone controls. Appears to be a "re-finish", in interesting "Fleck-Tone" gray paint. We think it is not the original finish, but it could be original. Someone did an incredible job it if is a re-fin, as the routed edges are perfectly finished and all parts had to have been removed with room made for the extra finish thickness. No worries about finger prints with this one. Un-bound, graphite? or other synthetic material, ebony black fingerboard  w/ dot inlay side markers on a solid mahogany neck with a 4-bolt neck joint. Black anodized tail piece perfect and rust-free. Finger board near new condition. Features 4 high quality, "sealed" tuning machines that work perfectly and hold tune. Plays and sounds great! Lots of fun. We have completely done a "Pro" set up on the guitar, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!). 34.5" scale length. Plays and sounds great. We also installed a new set of .040 "Round-wound" strings (yes I know flat wounds are more correct for fretless, but I prefer a bit more brightness. You are free to install flats once you own it). No case or bag included.
Rock music evolved from Blues, the music of the streets. Most musos’ of the 50s and 60s were poor and guitar amps made to a budget. Some but not all technical principles of amp designs were well thought out. Fender and Marshall were the dominant and most copied brands. The powerful amps had 4 output valves in parallel push-pull and gave approx 60 - 100Watts.

Most guitar especially for those which have more than 1 pickup have selector switch. Attached on the body and normally below the 1st E string on the body of a stratocaster guitar. And on the top shoulder for Les Paul. Its a basic things to understand the switches on which pickups its toggling. First, you need to understand what is the switch for???
A little bit of history will make this clearer… The original Fender Stratocaster switches were 2-pole 3-way switches (that’s actually what I have on my schematic, I think you’ll see why in a bit) and were intended only to select either the neck, middle or bridge pickup. However these were “make before break” switches where, as the switch is moved across from one position to the next, the next contact is made before the previous contact is broken. People found that if you could get the switch to rest in between those three positions that you’d actually have both neck and middle or middle and bridge pickups connected at the same time and, most importantly, it sounded good! It became a common thing to rest the 3-way switch in between the positions, so common that in the 60’s people were filing notches in the detente mechanism of the 3-way switch. These became the “notch” positions. In the 70’s, Fender adopted this popular mod into their stock switch thus becoming what we now use and call a 5-way switch but is, in fact, a 3-way switch with 5 positions.
A combo amp contains the amplifier and one or more speakers in a single cabinet. In a "head and speaker cabinet" configuration, the amplifier and speaker each have their own cabinet. The amplifier (head) may drive one or more speaker cabinets. In the 1920s, guitarists played through public address amplifiers, but by the 1940s, this was uncommon. A rare exception in the 1990s was grunge guitarist Kurt Cobain, who used four 800 watt PA amplifiers in his early guitar set-up.
Although acoustic guitars have recently surpassed electrics in popularity, the electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. If you want to play in a band, you’ll probably want an electric guitar. You’ll also want one if you want to develop the ability to play melodies and solos because electric guitars are, in general, better designed to accommodate fast fingering and more able to stand out in a musical group.

Note that much of information and pictures are courtesy of Paul Bechtoldt and D. Tulloch's book, Guitars From Neptune", 1995. Much of this book is catalog reprints, but from it and American Guitars by T. Wheeler, I was able to construct this information. Personally I've never really actively looked for these guitars, so my knowledge base is somewhat limited. But a lot of people buy these at garage sales, flea markets, etc, and ask me about them. There doesn't seem to be a lot of information out there. This is probably because Danelectros and Silvertones are considered "low end" vintage guitars at best, and don't sell for a lot of money. So I hope this page will be of some help in their identification.


In 1978 the Les Paul Pro Deluxe was introduced. This guitar featured P-90 pickups instead of the “mini-humbuckers” of the Deluxe model, an ebony fingerboard, maple neck, mahogany body and chrome hardware. It came in Ebony, Cherry Sunburst, Tobacco Sunburst or Gold finishes. Interestingly, it was first launched in Europe, rather than the US. It was discontinued in 1983.
5.  Customer installed strap button on heel of acoustic.  This was a simple job that went horribly wrong because a pilot hole wasn’t drilled.  Result:  Cracked heal.  Fix:  Careful application of cyanoacrylate glue and touch up refinish.  I’ve also seen strap button installations on guitars with bolt on necks where the pilot hole has hit the threaded insert in the heel.  Make sure you know where the insert is placed on that particular guitar before you drill.
The first guitar developed was the K1 Series. Launched in 2000, this instrument had a dreadnought cutaway design and used inexpensive materials such as laminated spruce for tops, and sapele for back and sides. Kona Guitars then launched the K2 series after which it diversified, at present offering over 30 models of guitars, ukuleles, violins, and other instruments.

In 2013 Vox released updated "G2" versions of the 15 watt and 50 watt heads, and added a combo version of the NT15H-G2 called the NT15C1. Compared to the original NT15H, the NT15H-G2 adds a foot-switchable Girth channel (which first appeared on the original NT50H) with an additional 12AX7 in the preamp section, a "Dark" switch, a digital reverb, and an effects loop. However, Vox did not retain the pentode/triode output section modes from the "G1" version that allowed for full or half power operation as well as a broader tonal palette. The NT50H-G2 differs from the original NT50H with the additions of an XLR D.I. out and a digital reverb, and the deletions of one 12AX7 preamp tube and the "Tight" switch. It also appears the FX loop is no longer bypassable. Gone is the bright chrome look of the "G1" models as both heads received new cosmetics in the form of a black mirror finish on the tube cage and a new suitcase-type handle. Vox also released "G2" versions of their matching cabs: the V112NT-G2 (one Celestion G12M Greenback speaker), and the V212NT-G2 (two Celestion G12H 70th anniversary model speakers), each also sporting the suitcase-type handle. The new NT15C1 combo combines an NT15H-G2 chassis with a single 16Ω 12” Celestion G12M Greenback speaker in a black tolex cabinet with a suitcase-type handle.
But here’s the thing: every single useful DAW is available for a 30-day demo or so. So you can at the very least try before you buy. The only downside is that some of these are only available in their full “pro” versions, so if you’re on a budget, you can get the 30 day (or more : REAPER has a 60 day demo and only costs $60 if you keep it, but I don’t know if you’d do live stuff with it… some of the fun will be figuring out all the tech).
Moreover, it can hand a wide range of musical styles and techniques. In most cases they're more popular with classic rock and blues fans, perhaps the Stevie Ray Vaughan or Eric Clapton enthusiast. However, there have been players over the years who have used Stratocasters in much heavier styles of music. Billy Corgan and Jim Root are just a couple that come to mind.

So to conclude, you don’t have to spend much money on a beginner/practice amp to have a tremendous amount of fun with it. Be sure to check out MusicGoRound stores near you for amazing deals on used practice/beginner amps. The store employees can help pick out the amp that fits your budget and your needs. Odd are that your practice/beginner amp will wind up becoming an old and dear friend to you over the years. Enjoy every minute with it!
When making solder joints to switches and pots, the lug and wire should be heated by the tip of the iron and the solder pressed (or flowed) onto the joint. In this manner you can avoid cold solder joints as both components are properly heated prior to the application of solder. Melting solder on the tip of the iron does not insure the actual components are being heated properly.
An expander is the opposite of a compressor. It stretches out the dynamic range of your signal allowing the quietest sounds to be even quieter and the loudest sounds to be louder. This can be useful in situations where you want quieter noises—such as squeaky fingering sounds—to become inaudible in the mix where they don't attract attention, while your intentional tones soar to the top.
I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.
Add a maple top to the mahogany body, as do a great many Les Paul models, and a blend of characteristics comes forward. The mahogany’s depth and richness remain, but the maple provides added snap, clarity, and definition. It also tightens up the lows and adds more cut to the highs. For many players this sonic evolution is highly desirable, whereas others might prefer the smoothness of the pure-mahogany design.
From the jazz-tempered Artcore series to the metal-shredding Iron Labels and all of their rocking classic models, Ibanez electric guitars are definitely not confined to any one genre. You can play whatever music you like with the right Ibanez axe, whether you go for one of their off-the-shelf designs or the signature style designated by your favorite guitar hero.
Fender Montara acoustic electric with HSC. Part of the California series made in the early 90's. BEAUTIFUL guitar! See pics. I would describe it as being in excellent condition for its age. Of course there are some minor signs of use upon very close inspection but nothing that jumps out. (2 small dings are shown in pics) All electronics work, could probably use some new strings. If you have any questions please ask!
When considering the guitar from a historical perspective, the musical instrument used is as important as the musical language and style of the particular period. As an example: It is impossible to play a historically informed de Visee or Corbetta (baroque guitarist-composers) on a modern classical guitar. The reason is that the baroque guitar used courses, which are two strings close together (in unison), that are plucked together. This gives baroque guitars an unmistakable sound characteristic and tonal texture that is an integral part of an interpretation. Additionally the sound aesthetic of the baroque guitar (with its strong overtone presence) is very different from modern classical type guitars, as is shown below.
Takamine has been known for their high quality and highly affordable guitars for years. Their GD51CE comes in just under $500, and is a cutaway dreadnought. It is my top pick if you are looking for the best cutaway acoustic guitar under $500. It has a slim neck for great playability, something that beginners and experts both love. It has a spruce top with rosewood back and sides. You will also be able to amplify this guitar, as it is an acoustic electric. It comes in natural or sunburst finishes. Owners describe it’s sound as loud and balanced, which is expected of a dreadnought cutaway. You can’t go wrong either, as it has an onboard tuner. See more pictures and reviews of the guitar here.

ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Hauptfeder Anschlag Tremoloblock Anschlagstab Bei richtig gestimmter Gitarre stellen Sie die Hauptfeder ein, um sicherzustellen, dass Anschlagstab den Tremoloblock und Anschlag berührt. Wenn der Anschlagstab nicht den Tremoloblock und Anschlag berührt, stellen Sie die Hauptfeder- Einstellschraube ein, bis Kontakt hergestellt ist.
Boogex is a guitar amplifier plug-in with a variety of sound shaping features.  With Boogex it is possible to get heavy distorted sound as well as slight distortion sound.  Boogex is also able to apply any speaker cabinet impulse response (selection of built-in impulses is available).  Processing latency is very modest - 96 samples (2.1 ms at 44.1kHz).  Boogex comes with several example factory presets.
I haven't had the pleasure of owning an Andrew White yet, but I plan to. I've followed the company and Andrew for some time after noticing repeated YouTube videos featuring unique guitars with lush, exotic tones. Since then, every time I've had a question or comment it is Andrew himself that responds quickly with pleasant and enthusiastic answers. Andrew White guitars have something different to offer and Andrew himself seems to be a down to earth guy with the passion of guitar building in his heart.
The hollow body — the original electric guitar design — is completely hollow on the inside, like an acoustic guitar. Hollow-bodied guitars like the Gibson ES-150 saw use in jazz ensembles by players such as Eddie Durham and Charlie Christian, but were also adopted for country, folk and, eventually, rock and roll. If you’re looking for warm, mellow tones, the hollow body is your best bet. That isn’t to say it can’t give you some sweet, raunchy distortion. A proper hollow-body setup can pull off a great classic blues or rock sound, but they are more prone to feedback than solid body guitars.
For acoustic guitar players (and electric players) there is simply nothing to dislike about the Hall of Fame reverb pedal, unless you just dislike ambient effects in general. The HOF is one of the most well-put together ambient stompboxes we've ever used, and it's perfect for acoustic guitar tones. When you're adding effects to your acoustic guitar, reverb is one of the best suitors for several reasons.

A direct line can be drawn from “Rumble” to “My Generation,” “Anarchy in the U.K.” and “Smells Like Teen Spirit.” The song is often credited as the origin of the power chord, but it also heralded the transformation of rock from the music of youth to the soundtrack of juvenile delinquency. Several radio stations banned “Rumble” because they thought it was too sexy, raunchy and violent. Wray even dressed like a juvenile delinquent, embellishing his greasy black pompadour with a leather jacket, jeans and shades at a time when most white rock and rollers still took fashion cues from Perry Como and Bing Crosby.
But is the Fender Deluxe really as good as the name suggests? We certainly think it is! Even though it would be easy to just write it off as an electric guitar for country music, it’s actually really versatile and can be used for any other genre as far as we’re concerned. This is thanks to two vintage noiseless pickup configurations, one on the neck and one on the bridge, and a strat pickup in the middle.
The Wah Wah pedal is one of the coolest guitar effects ever. Released in 1967 as the Vox Clyde McCoy. Oddly enough Clyde McCoy was a trumpet player as the pedal was to be used when amplifying the horn. Fortunately guitarists picked up on the almighty wah. The name Cry Baby has become de facto for the wah as it became the most popular. A wah is basically an active tone control that boosts lower frequencies through higher ones by using the sweep of the pedal. A guitar’s tone knob is passive and just rolls off high end, the wah electronically boosts frequencies.
Semi-acoustic guitars have a hollow body (similar in depth to a solid-body guitar) and electronic pickups mounted on the body. They work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Whereas chambered guitars are made, like solid-body guitars, from a single block of wood, semi-acoustic and full-hollowbody guitars bodies are made from thin sheets of wood. They do not provide enough acoustic volume for live performance, but they can be used unplugged for quiet practice. Semi-acoustics are noted for being able to provide a sweet, plaintive, or funky tone. They are used in many genres, including blues, funk, sixties pop, and indie rock. They generally have cello-style F-shaped sound holes. These can be blocked off to prevent feedback, as in B. B. King's famous Lucille. Feedback can also be reduced by making them with a solid block in the middle of the soundbox.

Rack-mounted effects processors are another option, and are often used in pro and home studios as well as in stage rigs.. These effects units offer the same options as floor-based pedals and multi-effects units. They are simply mounted in a rack, and usually can be controlled with a foot pedal or the controls on their front panels. Newly developed iOS app-based and DAW-based effects add even more options to how you go about building an effects collection.
Some make your lowest volume notes rise up to an audible level with an expander, which will increase the amount of sustain your notes have.  It almost sounds like a sound flower blooming.  Others act like traditional compressors with a threshold and compression ratio. The louder sounds are reduced in volume, which helps in producing a more level volume overall from your guitar and amp.  The sound guy will consider you his best friend after you send him this more consistent signal.
First, you have so many different types music – flamenco, jazz, country, blues, classical, rock and pop, to name just a few. Then you have musicians performing at different levels – there are the beginners who’ve never held a guitar before, there are experienced guitarists playing in bands, then there are professional guitarists, who make a career out of playing the guitar.
Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.
The Hi-Flier likely is among the first of Univox's guitars. For those who don’t know, the Hi-Flier takes after the Mosrite Ventures. This guitar gained significant influence in Japan, particularly because of the Ventures’s enormous popularity in the country at that time. The Ventures were an instrumental group who rose to fame worldwide in the ‘60s, and, despite their decline in the U.S. in the ‘70s, remained “Beatlemania huge” in Japan up until today. Along with the Ventures-esque guitar, a Hi-Flier bass was designed as well, which was nearly identical to its six-stringed counterpart.

A well known South Korean guitar brand, cort guitars is swiftly rising up in Indian markets. This brand is famous for producing acoustic, bass and electric guitars at less cost. Its starting price is 10,000 Rs and comprises of some best models like VL, all the G and Aero series and classic rock. If you want to buy this guitar, then you may purchase from online website or firm official websites as well.
hey paul. i have a dorado 6 string acoustic. they really are beautiful guitars (for the price and value). if you email me (swiver84@hotmail.com) i will send you pictures of it. i'd like to see some of your dorado as well, i've only seen a couple others on ebay. i lost one on ebay yesterday by 1$! i am still kickin myself in the butt for that one. it went for 36$.
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
Market sentiment is overwhelmingly positive, with many reviewers describing how the Seagull S6 Classic M-450T exceeds their expectations. Build quality and playability gets the bulk of commendations, along with its clear sound and good acoustic projection. Some even dare to compare the Seagull S6 Classic with super expensive guitars from major brands.
Harmony was founded in 1892 in Chicago by Wilhelm J.F. Schultz. Sears acquired them in 1916. Harmony made guitars for others under many names, some of which they acquired from other companies due to bankruptcies. These include Oscar Schmidt, Stella and the Sears brand Silvertone. Harmony went out of business in 1985. A new company is currently selling guitars under the Harmony name – many of these are classic Harmony designs such as the Harmony Rocket electric guitar.

In regards to which is best I personally think you pretty much got it right! Folks can piss n moan all they want but the facts are facts. Gibson, Fender, PRS ect all make fantastic guitars, time-tested tools of the trade. Many of you feel the need to want to publicly put down a certain brand in favor of another, there's good n bad in all of them!! If I could afford a Gibson Les Paul I would get one! Sure I could pull out the plastic n get one but I don't wanna have to do that just yet. I have no shame in purchasing a cheap guitar as long as I like it, to me if a guitar has a good smooth fast neck ......... it's a good guitar!! You can always swap pups n hardware but the neck is a little more complicated. I have a Fender Squire Strat, it is an "E" series Squire, I think it was made from 1984-87, and I can tell you that I will be 50 years old in May of this year and the neck on this Squire is the best I have ever felt on any guitar I have owned!! and yes it was a fairly cheap guitar. Now I hear that the "E" series of Squire Strats are supposed to be highly sought after or something, I don't know all about that, all I know is that I love the way this guitar plays n feels in my hands n riding in front of my belly! So folks don't put a guitar down simply because you can't afford it, like I said they are good guitars for a reason, same goes for the cheap guitars, don't knock 'em 'til you try 'em, there are some mighty good players out there to be had for cheap $$$, bottom line ..... regardless of the name on the head ..... if you can afford it, if it feels n looks the way you like n has a good neck then buy it n give it the love it deserves, it'll love you back in ways you never imagined!! Happy pickin n God bless
After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.

Note: Youpi Choupi's answer calls my answer below into question by pointing out that classical and flamenco guitars are acoustic guitars. He is correct in this of course, they are all types of acoustic guitar. However, most of the time when someone says they play "acoustic guitar," they mean the commonly used steel-stringed acoustic that most rock, folk, country and other artists play, and I believe this was the intent of the OP when they asked the question. Hence, an answer simply pointing out that Spanish guitar and acoustic guitar are both acoustic guitars would not have been a helpful answer.
For experienced players, you already know what kind of questions need to be brought up when purchasing a guitar. For beginners, a great starting point is to look at what your favorite guitarists play. By taking your own musical tastes into consideration, you can narrow down your choices to models that will provide the tone and sound you already know and love. But whatever you're looking for, you can be certain that the perfect guitar for you can easily be found, right here. Just take a look around and see for yourself.

: : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! Hello, The Vox "plank" guitar I had was EXACTLY like yours! I don't have it now (January,2005). I sold it on eBay this last Spring on Ebay to a collector that works at Warner Bros. studio. He bought it for $460.00 !! There were a few bidders, so I would hang on to that 1950 skiffle guitar if I were you. They are very RARE! Peace! Rory

O WOW!...I love...Fallout 4 is a great game like the rest of the fallout series but if your a fan of the series u will be kinda of down that the choices u make don't affect the outcome of the game because they made more of a story they wanted to tell but don't lose hope still a good game and they might make a sequel to new Vegas and there just might be a Multiplayer for new Vegas 2....The world is so large and the gameplay non linear (which is good and bad), I find if I walk away from the game for a while, I have to spend a lot of time figuring out where I was and where I stashed things when I come back to it later.
Delay is essentially echo, but it can be so much more when used well. The two most important knobs are “time” and “repeats”. Time will increase the length between repeats, and repeats will adjust how many echoes are heard. While it is tempting to max the repeats and enter space rock land, less can be more. Used gently you can get reverb or slap-back rockabilly sounds. With careful knob setting you can even create harmonies and loops like The Edge.
1.  And now for my favorite customer fix… A re-glued bridge on an acoustic using Gorilla Glue and wood screws.  This is an epic failure on so many levels.  Wood screws should never be used to hold a bridge on (Gibson, take note) .  And anyone who has ever used Gorilla Glue knows it has no place in guitar construction/repair.  It’s a polyurethane glue that works very well in certain circumstances (water contact, etc.) but the foaming that occurs when the glue is curing can create a humongous mess.  Fix:  Take the bridge off and refinish the top.  What could have been a $85.00 repair is now over $400.00.
The fact is, the qualities of different strings can have an effect on your guitar’s resonance and tone, on the quality and responsiveness of your attack as a plectrist or finger picker, and impact your speed and other important factors. And think about your budget. Some coated strings list at nearly $20, while a good basic set of electric guitar strings can be scored for $3 to $4 on sale.
Naturally, if a seller can get more money by calling what they have a “lawsuit guitar”, they’re going to do it. Unfortunately, some writers who should know better have taken to using the term for any old Japanese lookalikes, copys, knockoffs, etc, of (mostly) American guitars. Some sellers are using terms like “lawsuit era” or “pre-lawsuit” which don’t mean anything at all.
James Burton, another famous Twin user, put it best: “If you can plug your guitar into an amp and make it sound good, that’s what it’s all about. The amp I really enjoy playing, especially when I’m traveling, is the Fender ’65 Twin Reverb. It’s got everything you need for live playing and it has great tone. That amp just works for me and it’s real trustworthy. When I travel on the road, I do use a little digital delay and maybe a little chorus, but I just like the sound of the guitar and playing something that I think people will appreciate and understand.”

Next up we have the specialty electric guitars. This category consists of several different types of electric guitars, but we’ll start out with 12-string electric guitars. The fact that the low E, A, D, and G strings all feature higher octave strings while the B and high e strings both have additional strings that are tuned the same, electric guitar 12-string models have a distinctive shimmer and richness to them that guitar players love. Guitar players who favor heavier genres like death metal or hard rock may want to add a 7-string, an 8-string, or even a 9-string electric guitar to their rig for when they need some extra low-end growl and power. Other specialty guitars include baritone guitars, double neck electric guitars, and pedal steel guitars & lap steel guitars.
×