According to Harmony’s 1963 price list, the H1213 Archtone sold for $37.75. If we take inflation into account, this same guitar would actually sell for around $270 today. This is roughly the same price for most entry-level acoustic guitars these days, but the two main differences are that the H1213 is an archtop and it was made in the US (most modern entry-level acoustics are flattops produced in Asia).

This is a wide range of electric guitar series that have a stylish body and deliver high-quality sound. Cort guitars are fabricated by South Korean manufactures and have been on the market since 1973. Those who are keen on the appearance of the guitar can opt for this brand of electric guitar. This is an electric guitar that is available at an affordable price range between 10,000 to 40,000 INR.
you put in a lot of work, its not biblical correct, pretty good...but take with a grain of salt. but some guitars are made in Korea. I bought a Yamaha 3 piece back like a Kiso Suzuki, I would it was made in Japan The tuners said made Japan. I thought the pawn shop was crazy. I got it for $100 Love this guitar and then one day I looked at the the decal in the sound hole and in the tiniest print "Made in Korea" I felt a pang like o' crap I bought a Korean guitar. But I have a few Acoustics High end a Guild made in the 80's and this Yamaha is incredible. better or just as good as my old Suzuki
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]

Neck of the guitar is bolt-on made from maple with a scarf joint for an angled back headstock. Which in turn increases the tension behind the nut eliminating the need for string trees or string retainer bars. Also on the neck are 24 jumbo frets placed on a rosewood fingerboard garnish by sharks fin inlays for the looks and performance of the guitar.


Bass guitar tabs are basically meant to be plucked with fingers. One should try to pluck with all the four figures and if not possible then first two. One should also try to understand the rhythm of the drum and the tempo of the song, while reading the bass beginner guitar tabs mentioned below. The technique used to play these tabs is that the alphabets mentioned to the left of each string, is the string name, and have to be used. And the number represents the fret number. Try jamm'n with the bass guitar and the bass guitar tabs for beginners, that are mentioned below.
For rehearsals, studio recording sessions, or small club performances, electric and upright bass players typically use a "combo" amplifier, which combines a preamplifier, tone controls, a power amplifier and a speaker (or multiple speakers) in a single cabinet. Combo amps come in a variety of speaker configurations, such as one speaker (e.g., often one 12" speaker or one 15" speaker, although there are some micro-amps with one 10" speaker) or two speakers (e.g., two 10" speakers) or four speakers (e.g., four 10" speakers). The dividing line between practice amps and combo amps that can be used for live venue shows is described in the power in watts section. The most powerful combo amps available deliver between 800 and 1000 watts to the internal speakers.
I am leaning toward Justin and keep watching Marty I jumped way ahead into intervals and in the middle of the presentation it clicked. He knows his stuff. As a newcomer I want to see a bit of the whole picture as I learn basics. PS senior .Found this review very good of top sites and subscribers. AndyGuitar claims on Amazon to be the number one you tube guitar teacher. Not college educated like Justin, J Kehew or Marty Swartz . I will check these others out. Thanks for the review. I would have missed some. So many flooding You Tube
Lastly, we have guitars which combine the two systems and have both the piezoelectric pickup as well as a microphone in the sound box. Both of these sources are fed into a preamp, which often allows you to choose the source of the sound. Not only that, but you can also blend the two together to average out the benefits of both types while minimizing the negatives.
Unless it's broken and will need to be replaced, start with obtaining a new nut that is anything to your liking, preferably a blank nut rather than a pre-cut to avoid improper string height. If cutting a blank try copying your old nut and make adjustments if needed using the neck as a guide after cutting out the nut. To do this take a sharp blade that is easy to work with such as an X-acto and cut the finish that holds the sides of the nut. Make sure to cut all of the finish as it will break apart when you take out the nut.
The most underutilized sonic tool that electric guitarists have is built right into their instruments: the volume and tone dials. Most players tend to leave their guitar’s volume up full and set the tone knobs in one place and work from there, but with a little practice it’s easy to get used to using these potentiometers or pots — which are contacts that control voltage — to sculpt interesting sounds.
There is dust or corrosion in the potentiometer behind the knob. You need to turn the volume knob between 1 and 11 over 9000 times to wear the track clean again. . If that does not help taking the electronics tray out of the amp (don't break the wires and don't electrocute yourself) to check if the volume potentiometer has any holes. Using a can of compressed air or non-reactive solvent from an electronics store with the thin nozzle tube supplied, blow or flush out the dust. . If it really annoys you and you can't get rid of it, replacing the potentiometer(s) with new sealed ones will overcome the problem forever. or use standard ones and remember to turn the knobs every week to stop dust from settling. . PS. if it is a high powered amp there will be capacitors inside that can seriously hurt you even when the amp is unplugged.
Semi-acoustic guitars have hollow bodies which give them a warmer and more dynamic range of sounds. They are vulnerable to unwanted feedback as the distorted sound increases the chances of feedback. That’s why we don’t see rock and metal musicians playing a semi-acoustic guitar. Many guitars have solid blocks inside for decreasing the feedback factor. Check out our list of semi-acoustic electric guitars here.
This old Nickelback hit is made up of only four different chords, written in the Key of G. During the verses only use G – C – F to progress, while the chorus of the song will add an Am (A minor) to change things up a little bit. This is a fun song to listen to and play along with, especially since the song is set a slower tempo, especially for a rock song.
Introduced in the late '90s, the PRS SE line was the company's entry into the already tough entry level market competition. With it, one can own a PRS guitar at a much lower price point, with the main difference being the country of origin, which for the case of the SE is Korea. The SE Standard line takes affordability a step further by having the production done in Indonesia, while still maintaining high quality standards.
Also new in ’66 was the SM series, a variation on the E-100 and ET-100 introduced in the previous year, very similar to the Ks except the cutaway horns were flared outward in the classic Teisco “tulip” shape which would dominate later in the decade. These had fairly flat rectangular chrome-covered pickups, with a rectangular indentation stamped in the center and six flat round poles, plus to long half-slots along both outer edges. The SM-2L (Teisco Del Rey ET-210) had the hooked headstock, small striped metal pickguard along the lower body, two on/off sliders, volume, tone, roller bridge and Bigsby-style vibrato. The SM-2L retained the German carve relief of the K series. A plain-Jane SM-2 (Teisco Del Rey ET-200) followed, sans German carve, and with a bridge/tailpiece assembly. The SM-1 (Teisco Del Rey ET-110) had just a neck pickup with volume and tone controls, bridge/tailpiece assembly, no German carve or striped metal pickguard, and the Strat-style head of the previous ET-100.

So I got this kit last week full of hope yet penssive knowing that these kits from over seas have lots of problems. On first inspection the kit was okay, Nothing, I thought at the time, a little TLC couldn't fix. Here I am getting ready to install the electronic today, level the frets, string it in and play. As I opened the pakage with all of the tone and volume pots I noticed one thing super wrong right away.
Besides his restoration of vintage guitars, one of the most important contributions Paul has made to the guitar world is passing the torch to a new generation of guitar masters by offering Luthier classes that teaches how to build your own electric guitar at his shop. People from all walks of life have attended his seminars, including Mark Colombo, a former offensive tackle of the Dallas Cowboys. Paul is not only sharing his love of building great guitars but also teaching the science of how the magic works. "I have what's known as the 'no-fail policy,'" he says and laughs. "If you can't do the work, I'll do it for you."

Whether you're picking up a guitar for the first in your life or have been rocking the stage for years, there is a left-handed instrument out there that's just right for you. Electric guitar design and construction varies depending on the size of the body and shape of the neck, tonewood, bridge and pickup. Different woods produce different tones. Higher end guitars are usually made of hardwood like alder, maple or mahogany while a plywood or pine option gives exceptional durability perfectly suited to a beginner or student musician. The guitar's body typically comes in solid body, hollow body or semi-hollow body. Harder rock musicians often favor a solid body for louder, more vibrant pickups and feedback, while an acoustic performance would benefit from an acoustic guitar. The neck of a guitar is another consideration. A shorter neck would generally be seen on a smaller guitar; a musician who does not have large hands would appreciate the easier handling of a smaller guitar. The majority of electric guitars have six strings; however there are seven, eight and 12 string options for those who have mastered their left-handed guitar and are looking for ways to boost their performance. Left handed guitarists have made a rich and impressive mark on the history of popular music. No matter if you plan to rock the stage in front of an adoring crowd or just want to riff with your buddies at home, there is a sensational left-handed guitar out there waiting for you.
The key to getting a great guitar sound really is in the hands of the engineer, not his equipment. I've gotten great sounds in multi-million dollar rooms, and topped them in the smallest of home studios. You can do it too. The key is to constantly experiment and apply some basic physics. Try different mics, try moving them closer and farther, try different angles, try putting the amp in a corner, try putting the amp on a concrete floor, try it on a wood floor, try it on a floor with green shag carpeting, just try anything!
Today we are going to show you some of the best effects pedals from this category, which you can get right now. We have chosen a variety of flavors as well as price ranges, thus making sure that anyone can have access to a good reverb no matter what. More importantly, we want to use this opportunity to familiarize you with reverb as a guitar effect.
One and one half steps down from Drop D. This tuning is most often used by modern rock and heavy metal bands. Utilized by bands like A Day to Remember, Slayer (on "Cast Down", "Seven Faces" and "Payback" from God Hates Us All, as well as few songs on Christ Illusion, World Painted Blood and Repentless), Slipknot, Intronaut, Down, Machine Head (tuned 40 cents sharp), Demon Hunter, Chevelle, Origin, Asking Alexandria on their third and fourth albums, From Death To Destiny and The Black respectively, RED (on "Faceless"), Parkway Drive, Skillet (on much of Comatose), Veil of Maya, Bring Me the Horizon (up until Count Your Blessings), Sevendust, Soilwork, Chimaira (on a few songs from The Infection), Eye Empire, Crown the Empire, The Devil Wears Prada, Drowning Pool, The Veer Union, Comfort in the End, Attack Attack!, Mark Tremonti (on much of Full Circle and All I Was, and the songs "Coming Home" and "Home" from Blackbird and AB III, respectively), Nickelback on the song "Side of a Bullet", Disturbed on Immortalized and occasionally Black Stone Cherry, Limp Bizkit, The Kills, and Sucioperro.
For many guitarists, the only thing better than a Gibson Les Paul is a vintage Gibson Les Paul. From stunning museum-quality pieces from the '50s to road warrior axes from the Norlin era of Gibson production in the '70s, there are fresh Les Pauls added to this page every day including Les Paul Standards, Customs, Juniors, and more. Whether you're a veteran Gibson collector or a new inductee to the ranks of Les Paul fandom, you can find your next vintage LP here.
Amp Modeling: A multi-effects pedal does not necessarily guarantee that it also includes amp modeling. Amp modeling basically means that, in addition to effects like reverb, delay, chorus, fuzz, distortion, compression, et al. it also has the ability to sound like - or model - various tube and solid-state guitar or bass amplifiers. Amps have a tremendous impact on tone, which is why brands like Marshall, Vox, Fender, Matchless, Mesa Boogie, and many others have cult followings. Copying the true character of an amp in the digital world is admittedly a tall order, and one that multi-effects pedals are not great at; even the best ones struggle. Still, they do a decent-enough job, and you should decide if you want your multi-effects pedal to include amp modeling.
Earth Quaker Devices – Have you ever heard a song and wondered “how did they get that sound?”. If it was a recent recording there is a good chance these guys were behind it. They make an incredibly wide range of pedals that all go from great quality, usable pedals for almost any style to the weirdest, most wonderful tones that you have never heard before.
As this effect is more pronounced with higher input signals, the harder "attack" of a note will be compressed more heavily than the lower-voltage "decay", making the latter seem louder and thereby improving sustain. Additionally, because the level of compression is affected by input volume, the player can control it via their playing intensity: playing harder results in more compression or "sag". In contrast, modern amplifiers often use high-quality, well-regulated power supplies.
ACT TRMOLO REPLACING THE STRINGS ACT tremolo allow two styles of string installation. 1) The strings are installed by putting the ball end into the string slot and hooking the ball end below the string catch at the rear of the tremolo unit. 2) The strings are installed by putting the ball end into the string slot and hooking the ball end in the string catch at the bottom of the tremolo unit.
Compressors are often applied to electric guitar tracks to bring out the guitar’s natural sustain, as well as even out the overall dynamic range. Lead guitar parts usually benefit from a degree of compression treatment, while heavily overdriven rhythm parts often require very little or none at all, as the distortion naturally provides its own type of dynamic control. In the case of unnatural sounds, such as electric guitar, compression becomes a highly subjective topic, so experimentation is key to achieving the desired effect. As a starting point, therefore, try medium-fast attack and release times – an extremely fast attack time will blunt the transient response of the note. Remember that electric guitars can be inherently noisy and compression will generally exaggerate any hums and buzzes.
This is a no brainer, but a value that must be considered before any purchase no less. As mentioned above, your abilities on the instrument will likely affect the price range you’re looking at, which may have an effect on the brands you shop within as a consequence. For instance, if you’re not looking to buy a high end guitar, you probably won’t even bother testing out a Gibson, as their guitars will likely be out of your range. The reverse is true as well, an experienced player on the market for high end tone probably won’t be satisfied by many of Yamaha’s offerings.
Carvin is a guitar company with a different business model than the rest. You won’t find them at your local music store because Carvin only makes custom guitars. Their instruments are based around a handful of templates and each feature components that are individually chosen by the buyer. For this reason, it’s very rare to find two Carvins that are completely identical.
So, what string gauge is standard for electric guitars? Most new guitars come strung with super-light or light-gauge strings. For beginning guitarists, that’s probably a good place to start. As you develop fretting and picking skills and your fingers gain calluses and strength, you may want to gradually move up to heavier strings, depending on the music you play and the tone you seek. Many guitar manufacturers make specific recommendations about what strings to use. Some produce their own strings or have them custom-manufactured to their specifications.
If you do record the bass both via a DI and a miked-up cab, and combine them later, as suggested above, you’ll want to pay attention to the relative phase of the two tracks. Even if the mic is placed very close (an inch or so) to the amp’s speaker, that track will still be slightly delayed (on the order of milliseconds), due to that small distance, relative to the DI track. Small delays like this can cause comb-filtering when the tracks are combined (at close to equal levels), which produces cancellations and reinforcements in the frequency spectrum that can impart a nasal, hollow, or slightly “flangey” sound, weakening the tone. You can see the time difference if you line up the waves in the DAW and zoom way in. You can either advance the amp track (via editing) or delay the DI track (via editing or a plug-in) until the two line up—the resulting tone should be fuller, and ultimately sit better, with a more solid low end, in the mix.
When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).
Taylor Guitars is an American guitar brand based in California. The company was founded in the mid 1970’s, and it has since grown into one of the largest and most respected acoustic guitar companies. Taylor guitars are recognized for their incredible quality, craftsmanship, and innovation, while still being an accessible guitar at a reasonable price.
Ibanez LGB30 George Benson Electric Guitar   New from$1,099.99Only 2 Left!or 12 payments of $91.67 Free Ground Shipping ESP LTD KH602 Kirk Hammett Signature Electric Guitar   New from$899.00In Stockor 12 payments of $74.92 FREE 2-DAY SHIPPING PRS Paul Reed Smith SE Zach Myers Semi-Hollowbody Electric Guitar   New from$779.00In Stockor 12 payments of $64.92 FREE 2-DAY SHIPPING Epiphone Limited Edition Matt Heafy Les Paul Custom-7 Electric Guitar, 7-String   New from$949.00In Stockor 12 payments of $79.09 FREE 2-DAY SHIPPING See All Signature Model Electric Guitars
Read Full Review It’s amazing to see a company that excels in all the products and services they offer, while other companies are struggling and scratching their heads to find a way to break through in the market. The best example of such success on Yamaha is with their long line of guitars and two of those guitars they have are considered by many is best for beginners. The guitars I’m taking about is the Pacifica Series PAC112 together with the PA012 featured here, which is also available on a guitar package.
Visit “mom and pop shops,” big-name musical instrument retailers, Craigslist, eBay & Amazon to compare the reviews and prices of various models. The ability to make an educated decision based on the feel, sound quality and playability is important. Consider renting a guitar for the first month of lessons. A good teacher will serve as a guide throughout the buying process and will teach you to play well enough to “test drive” your options.

The Takamine F-340 was the cause of a letter from Martin Guitars in the early 1980s because Takamine’s acoustic guitars including the logo design were supposedly nearly identical to Martin Models[citation needed]. According to Chris F. Martin IV, CEO of CF Martin and Company in a speech given to the Unofficial Martin Guitar Forum members on August 8, 2005, no lawsuit was ever actually filed, and Takamine did change the appearance of their guitars[citation needed].
The STRATosphere is not affiliated with Fender Musical Instruments. Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P Bass®, J Bass®, Fender® and the distinctive headstock design of Fender guitars are registered trademarks of Fender® Musical Instruments. All applicable Fender products are covered under warranty by The STRATosphere.
Over the past three years, Gibson’s annual revenue has fallen from $2.1 billion to $1.7 billion, according to data gathered by Music Trades magazine. The company’s 2014 purchase of Philips’s audio division for $135 million led to debt — how much, the company won’t say — and a Moody’s downgrading last year. Fender, which had to abandon a public offering in 2012, has fallen from $675 million in revenue to $545 million. It has cut its debt in recent years, but it remains at $100 million.
Preamp, or gain, controls (sometimes called “volume” on master volume–equipped amps) let you dial in impressive-sounding distortion at low volumes, but excessive preamp distortion can sound too compressed and sizzling at high volumes. Turn down the gain and crank up the master volume until the amp is set at the output level you’d normally play at. Now, slowly increase the gain until the sound becomes as distorted as you want it to be. If the tone is buzzy and lacks dynamics, the amp will have all the onstage presence of an American Idol reject.
The Les Paul Special VE has a Poplar body with a sleek look thanks to the Vintage Worn finish and no binding on the neck or body. The Les Paul VE is cut to the same classic profile of all Les Pauls and has a comfortable and fast Mahogany bolt-on neck with a 1960's SlimTaper D profile. The Rosewood fingerboard has traditional Pearloid "Dot" inlays, a 24.75” scale, a 14” radius, 22 medium jumbo frets, and a standard 1-11/16” nut. Just below the headstock is the famed “bell” shaped truss rod cover found on every Les Paul since the early '50s with “Vintage Edition” in white. 
:I need to know how to get parts for my old kent guitar.I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.
Also, if your slide playing includes any fretting at all, FORGET IT. While it certainly raises them well away from the neck, the strings are lifted to a height that makes trying to fret them pull them off pitch well before you reach the fret... and there is NO adjusting it. I used one on a wide neck 12 string strung for six. A neck designed for the tension of 12 strings easily takes the tension of a heavy gauge set in a raised open tuning. The "Slide Guitar Extension Nut" is ideal for such an application (if you don't want to even try any fretting) but I doubt Stewey Mac's sells very many of them.
There are several string configurations available with electric guitars, including 4-string, 6-string, 7-string, and 12-string configurations. Although each configuration can make a slightly different sound, the differences are mostly down to personal preference. Nontraditional configurations include 5-string, 8-string, 9-string, 10-string, and 18-string versions.

The most common alloy (mixture of metals) used in pickups is alnico; this is a combination of aluminium, nickel, and cobalt. Alnico magnets were once the strongest known, but they have since been eclipsed by the rise of the rare earth magnets, which can also be used in pickups. Samarium cobalt magnets and neodymium boron iron magnets can also be used, although are perhaps less common. Additionally, ceramic magnets, based on iron oxide with strontium or barium carbonate, can be utilised.
your right brian i been a acdc freak since u all been out in the early n mid 70s the greast band of all time. and i seen acdc 37 times through out the united states. i love my memories with the band and still watch and listen to the cds and dvds of the band. brian johnson is the best thing that happen to acdc since bond scott death. keep rockin guys i love u with a passion. mark
When Eric Clapton plugged his 1960 Les Paul into a Marshall Bluesbreaker in the mid 60’s (the set-up used to record Blues Breakers with Eric Clapton, the “Beano album”) he created a new rock tone that immediately became a standard.[15] Clapton played a 1960 Standard as a member of John Mayall & the Bluesbreakers and in the early days of Cream. The guitar was said to have been stolen while Clapton was preparing for the first Cream tour in 1966, following the recording of Fresh Cream, and was long considered an iconic instrument by Clapton’s fans and Les Paul guitar admirers. Gibson announced production of the Clapton 1960 Standard, also nicknamed the “Beano Burst”, in 2010. Gibson says the instrument “accurately represents what Eric Clapton personally feels his 1960 Les Paul should be”, with Clapton consulting on the design of the guitar. Production is limited to 55 hand-aged instruments signed by Clapton (who was allowed to keep the first five of these instruments), another 95 hand-aged instruments, and 350 Vintage Original Spec instruments, but all five hundred instruments feature period-correct hardware, two Gibson reproduction PAF humbucking pickups, and subtly figured “antiquity burst” maple tops.
One day I went over to hang out with a friend on Long Island’s prestigious, luxurious north shore. He was also an amateur, aspiring, guitarist, and perhaps slightly more advanced than me – after all, he wrote a solo, even if it didn’t belong to a song yet. But he was very excited when I arrived and wanted to show me something cool in the family room. When I stepped inside, what did I see strewn about the floor but a whole bunch of effects pedals surrounding his electric guitar like a battalion about to march on and conquer a fierce enemy.
One of the best defining features of Schecter guitars is their build quality. It seems that they always go an extra mile. Schecter’s bodies are solid, made of great tonewood depending on the application, and the array of finishes they offer are just impressive. In simple terms, build quality is not something you need to worry about with this brand.
2.      Weight – a LOT less. This is important if you’re leaving the garage for the first time and don’t have roadies, if (like me) you’re trying to not injure your back anymore lugging equipment), if you’re a touring band trying to spend less on cartage and more on crew, or if you’re a worldwide act who needs to truck and fly your stage rig between continents.
PRS: One of the best guitar brand one can go for (if they don’t want to go for the custom-built route). Their guitars look beautiful and sound buttery smooth. They have the most beautiful looking tops and inlay among non-custom guitars. The craftsmanship and attention to detail on PRS guitars is just exquisite. Of course they do have their custom shop called Private Stock and the Private Stock guitars are so gorgeous and meticulously built that anyone who sees them will be awestruck by their beauty, not to forget the sound of those guitars are like the voice of angels.

In the 2010s, virtually all of the sound reaching the audience in large venues comes from the PA system or sound reinforcement system, the huge speaker systems pointed at the audience. As well, in the 2010s on-stage instrument amplifiers are more likely to be kept at a low volume, because when band members have their onstage amps "cranked" to high volume levels on stage, this makes it harder for the audio engineer to control the sound mix and blend. For example, if a heavy metal bassist had two 8x10" cabinets and several 1x18" subwoofer cabinets and several thousand watts of bass amplifier heads, and these amps are set to a very high volume level, this bass player will be creating very significant onstage bass volume. If the sound engineer wished to turn down the bass in the PA/sound reinforcement system, this bassist's loud onstage volume would make it hard for this engineer to control and/or reduce the volume of bass in the FOH (Front of House) sound mix. Another issue that can develop with bass players who have very high onstage volume is that it can be hard for the audio engineer to produce a clean sound through the PA/sound reinforcement system. For example, if a bassist was driving her bass amp speaker stacks into clipping to create a fuzz bass tone, if the audio engineer wished to have a "clean" bass sound, this could pose a challenge.
First established in 1952, Guild has a long history of building guitars, and they draw from this experience with every guitar they produce. The company was previously acquired by Fender, and was sold to Cordoba back in 2014 - and they have since been making a steady comeback in the market. The Westerly Collection D-120 is a great example of what keeps the Guild brand alive - having impressive specs at accessible price points with Guild's characteristic old school appeal.
I'm sorry to disagree Merlin, but the woods used really do make a big difference to the sound of a solid body guitar. Both the neck and body are resonators, the string energy drives the woods which damp some frequencies and use that energy to emphasise the resonant frequencies. That drives the string's vibration through the bridge/nut/fretboard. It's a feedback loop.
Mundt Music of Longview, LLC is your one stop guitar shop. Located at 2312 Judson Road, we have everything that you need whether you’re buying your first guitar or adding to your growing collection. Make sure to join us in store on October 10, 2016 at 6:30pm, for our “Taylor Road Show” event. Guests will enjoy an evening of guitar talk and demos with Taylor factory staff and guitar makers from El Cajon, CA. It’s an event that any guitar enthusiast won’t want to miss.
For some performances - those well controlled performances of an orchestral guitarist, let's say - machine notation can get a lot closer to producing a true sound than it will to the variations offered by a virtuoso jazz guitarist, blues master or metal thrasher jamming outside the box. In some cases, the machine sound might already fool some of the most discerning listeners -- if the performance does not test the limits of the mechanical emulation.
The best electric guitar isn’t one that just sounds good (however you may define good as) — it’s how it feels in your hands. We remember when we could barely start forming memories, going to our dad’s shows and him using his telecaster on stage. He had been playing since he was 5 years old (which we actually used his opinion for in this guide as well) and continues to play today 50 years later. As we grew up and learned guitar ourselves, it was more about what was comfortable and felt as natural as possible. Paired up with the sound and feel, there are a few more factors to take into consideration when you’re looking for the best electric guitar.
The Meisterklasse is a high-end harmonica on the modular system, made in Germany, featuring chrome-plated cover plates, an anodised aluminium comb, and extra thick 1.05mm nickel-plated reeds. One other feature that sets the Meisterklasse apart from most other Hohner harmonicas are its full-length cover plates, which extend all the way to the ends of the harmonica's comb rather than sharply angling down before the ends to form an adjoining surface parallel to the reedplates and comb. The only other Hohner harmonica possessing this quality is the curve-framed Golden Melody.[25]
Here we have another Vintage Japanese GREAT find this example a beautiful pretty much exact copy of a vntage Martin D-45 ... this is a very High Quality built Lawsuit era Aria Pro II Model AW40. Made in Japan. From information on the Internet concerning dating these, the guitar's serial number would lead to 1976 manufacture. However, I could not find the AW40 model cataloged until the late 70's... but its a 76.. is consistent with all others. THIS is one beautiful guitar! it exudes fine detailed craftsmanship this was Aria's flagship dreadnought of this time period with D41-ish features. From an original vintage Aria catalog, AW40 features include: "Dreadnought sized, Solid Sitka Spruce top, Solid Brazilian Rosewood back and sides, bridge fingerboard and veneer headstock overlay with MOP logo, Marquetry Purfling" ( Top looks to be solid with the sides & back appears to me to be laminated )The catalog can be viewed at matsumoku.org, a site that deals with the history of Matsumoku made instruments like Aria, Electra and others. This guitar has the Martin classic snowflake mother of pearl inlays, abalone binding and rosette, and fully bound headstock and gorgeous rosewood fingerboard. Headstock also has a Rosewood overlay. The bookmatched rosewood on the back side is especially easy on the eyes. The guitar is all original with no repairs and with original tuning keys. It is in JVG Rated condition as excellent used vintage 8.8/10 WoW...its 35 years old and the woods have opened up now like fine wine the tone is richer & mellowed as only time can provide. No cracks or repairs ever. It plays very well with good action and has a nice warm rich tone. The Neck is arrow straight. Frets have minimal wear with no buzzing anywhere on the fingerboard....this is the one! At this link you can view more pictures of this guitar please cut & paste the following link: https://picasaweb.google.com/gr8bids/AriaPro2AW40D45BrazilianRosewood?authkey=Gv1sRgCOmS2c3RvMGpUg#slideshow/5609409732594635106.
I have a yamaha sg 1000 like Carlos Santana's. It rocks! I tried it with a Gibson sg of the same price and it didn't match the quality. Then I tried a Les Paul Gibson about one and a half grand more, even that wasn't as good as the sg 1000. Lets face it, the Japanese (this does include Ibanez for they are awesome too) kick ass when it comes to quality and price!
The so-called modeling amps can be said to differ from both tubes and solid state ones as they employ modern processing technology to apply preloaded characteristics to the sound. This can alter the output in a variety of ways, from imitating certain classic styles to rendering something entirely new. Needless to say, they are favored by cover bands and electronic music fans, but many guitarists don’t appreciate their “artificial” sound, although they can serve as good practice amps.   
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: amplifiers","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"headphone guitar amplifiers","prop5":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop6":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop3":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}

THIS IS THE ONLY WIRING GUIDE YOU WILL EVER NEED TO BUY. Learn step by step how to completely wire Telecaster, Stratocaster, Esquire, and Les Paul guitars and all of the potentiometers, capacitors, switches, ground wires, hot wires, pickups, output jack, and bridge ground. Even if you dont have a Fender or Gibson, this guide will teach you how to wire a guitar with 1, 2, or 3 pickups. Also learn where you can get the complete wiring kits for dirt cheap, and learn essential soldering tips. Why not learn how to change your pickups, tone or volume controls, switches, and capacitors yourself? There are a ton of modifications you can do to your guitar for dirt cheap. This book will also show you some secret "hot rod" techniques that the pros use. This book will teach you how to do coil tapping, coil cutting, phase switching, series wiring, parallel wiring, bridge-on switching, mini toggle switching, varitone switching, mega switching, yamaha switching, blend pots, and much more !!!


The Yamaha FG830 uses a well-engineered combination of woods to create a solid body and neck suitable for pro-level performance. You simply cannot go wrong with this guitar; the workmanship of this guitar is a cut above other acoustics in its class. Owners love the gorgeous dreadnought sound, describing it as rich, resonant, and well-rounded. One satisfied customer boasted that in a room full of acoustics, his Yamaha would “float to the top” of the din.
Wet Set: If you have a sound that you want to push a long way back in the mix, it can often be better to make your reverb effect pre-fader, and temporarily remove all the dry sound. Then alter the sound's EQ and reverb settings while listening only to the wet reverb sound. Once you've got that sounding good, gradually fade the dry sound back in until you're happy with the wet/dry balance. This approach can often be more effective than simply whacking up the reverb level while you listen to the whole song. Martin Walker
Perhaps the most dramatic of ambient mic techniques, though, comes courtesy of Chris Tsangarides. His 'Vortex' involves using studio screens to build 30-foot-long walls along each side of the guitar cabinet, creating a flare shape (apparently inspired by the shape of a bass bin). Within this flare, he places a close condenser mic and typically another couple of condenser mics with different distant positionings, perhaps at 15 and 30 feet away. "I walk around while the guy's playing and find a sweet spot and put the mic there", says Chris.
Tonhöhe ebenfalls gehoben und kann auf die gewünschte Tonlage eingestellt werden. Der Ibanez DOWNSHIFTER erlaubt es, die Tonlage einer Saite durch einfache Hebelbetätigung auf eine vorgegebene gewünschte Position zu senken. Um präzises Tuning für sowohl Auf- und Ab-Positionen zu erzielen, müssen Sie beide Hebeleinstellungen vor Betätigung des Downshifters voreinstellen.
We love guitars, they are definitely one of the best instruments of all time. What we don’t love is spending crazy amounts of money. We decided to find out what the best electric guitar under 1000 dollars is. Most often when it comes to musical instruments, you can’t expect budget beginners’ instruments to be as good as the best ones that cost ten times as much, but that doesn’t mean that there aren’t bargains to be found. For any skill levels looking for new acoustic guitars click here. If you want the best of both worlds, consider looking at our review of the top acoustic electric guitars.
For subtle modulation just set every knob at about 11 o'clock. You'll get a thin, shimmering layer over your acoustic guitar's tone that doesn't drown out the natural resonance of the instrument. The pedal doesn't boost your signal or add any kind of volume. All you'll hear is a clear, simple effect. Additionally, the CH-1's two stereo outputs allow you to easily split your signal between two amplification sources. Simply plug your primary source into output A (mono) and the secondary source into output B.
XM DLX2 is one of two Deluxe models in the highly acclaimed XM series from Washburn. The other one is XM DLX2F. XM DLX2 comes with a solid, double-cut body made of basswood back and maple top. Top is a two-piece and it features the characteristic XM series contour. As all models in this series are, XM DLX2 is made primarily for players of heavy metal and shred styles. Strong pickups, super fast neck and 24-fret fingerboard indicate this. Bridge section features a tune-o-matic bridge with string-through-body construction and black plating. In it`s front, Washburn installs a pair of open-coil humbuckers. Master volume, master tone and a three-way toggle pickup switch comprise the controls unit. 24-fret fingerboard is made of rosewood and it`s installed on top of a set in maple neck.
Combo amplifiers are the most popular type of guitar amplification these days. While amp heads are the source of incredible power, it is the versatility, convenience and simplicity of combos that makes them the go-to choice for so many – from beginner to seasoned pro. Combos come in a variety of flavors in all price ranges. While the practice amp and budget markets are awash with combos, there are also some epic premium models such as the Fender ’65 Princeton Reverb, which is a revamp of one of the most epic tube combo amps ever made. .

There’s a huge range of cheap electric guitars out there that would not look out of place on the stages of the world thanks to high quality manufacturing and the brands actually caring about their products – “cheap” does not always mean poor quality and plenty of guitars out there will give you a fantastic playing experience for many years without breaking the bank.
I'm sure its possible, I just don't know how easy it would be. I think EMGs are active, correct? So you'd have to have a place for a battery, plus figure out how to wire it. And yeah, they're expensive. If you could hold on for a while, I'd get the drum set. Then friends can come over and you can play together, instead of just being able to use just the guitar. It's up to you.
Ovation are relative newcomers to the world of vintage guitars, only launching their range at the 1967 NAMM show in Chicago. Ovation started as an off-shoot of founder Charles Kamen's work in the aviation field, studying vibration and resonances in helicopter blades. Whilst other respected American manufacturers relied heavily of quality nautral products and the artistry of their master luthiers, Ovation came very much from a science and engineering perspective: they used oscillographs to test existing instruments, and came up with the famous Ovation rounded back design, and suggested the use of a synthetic material, Lyrachord, claiming it to be more resonant that any wood.
While Dave Matthews Band has no more confirmed dates on their schedule, Matthews and guitarist Tim Reynolds have a number of duo performances on the docket, including a slot at Farm Aid 2018 in Hartford, CT on September 22nd alongside Willie Nelson, Neil Young, John Mellencamp, Chris Stapleton, Sturgill Simpson, Kacey Musgraves, Margo Price, Nathaniel Rateliff & The Night Sweats, Lukas Nelson & Promise of the Real, and Particle Kid. Dave and Tim also just announced their return to Mexico for a concert destination event set to take place February 15th–17th, 2019.
Someone recently posted one of my pedal demos in a thread on a guitar forum and stated that he really liked the sound of the pedal in the demo. Another forum member chimed in and said that for some reason, everything I play through usually sounds good. Shortly after, forum member “Squank” replied, “It’s a talent. Most gear can be dialed in to sound at least decent.”
This deal leapt out of the page at me straight away. The Fender Squier series has been around a while and even though it’s a budget guitar, you can always rely on Fender for great quality. But what I like the most about this package is that everything you need is included (apart from a guitar stand) and the Frontman 10G amplifier has some extra features that are excellent. The amp has an input for a playback device to jam along to (like your iPad or Smart phone, or even a CD player) plus a headphone output for when the neighbours get too annoyed. A Gain control and Overdrive switch let you grunge everything up, or you can dial it back to a classic, clean Fender sound.
Many bass players believe that tube amplifiers produce a "warmer" or more "natural" sound than solid state amplifiers when lightly or moderately driven, and more pleasing distortion characteristics when overdriven. Some performers also believe that tube amps have a greater level of perceived loudness for a given amount of amplifier power. Even though tube amplifiers produce more heat than solid state amplifiers, few manufacturers of tube amplifiers include cooling fans in the amplifiers' chassis. Usually adequate cooling is provided by passive convection. Adequate airflow is needed to prevent excessive heat from shortening the tubes' lifespan or producing tonal inconsistencies.[13] Tube amplifiers require more maintenance than solid state transistor amplifiers, such as replacing vacuum tubes or rectifying the tubes.
Together with Marshall and Vox, Hiwatt is considered to be one of the main contributors to what we commonly refer to as the “British sound.” The company’s history is older than the name, with owner Dave Reeves building his first custom unit in 1963. This earned a great deal of praise on the local scene for its reliability and virtually established the company’s character.  
i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.
Jazz guitar playing styles include rhythm guitar-style "comping" (accompanying) with jazz chord voicings (and in some cases, walking basslines) and "blowing" (improvising solos) over jazz chord progressions with jazz-style phrasing and ornaments. The accompanying style for electric guitar in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In rock and pop, the rhythm guitarist typically performs chords in dense and regular fashion to define a tune's rhythm. Simpler music tends to use chord voicings focused on the first, third, and fifth notes of the chord. In contrast, more complex music styles of pop might intermingle periodic chords and delicate voicings into pauses in the melody or solo. Complex guitar chord voicings are often have no root, especially in chords that have more than six notes. Such chords typically emphasize the third and seventh notes of the chord. These chords also often include the 9th, 11th and 13th notes of the chord, which are called extensions, or color notes.

While a noise suppressor/gate is not a modulation effect, it usually works and sounds best when it’s placed either directly after or in front of modulation effects. I prefer the noise suppressor after modulation effects as this placement will mute an unwanted constant “whoosh” that often can be heard when a flanger or phaser shifter is engaged even though the guitar is silent.
Play It Loud: An Epic History of the Style, Sound, & Revolution of the Electric Guitar is just that: a swooping, all-encompassing timeline of the instrument’s early days to its beyond-essential role in pop culture and music. Written by Brad Tolinski and Alan Di Perna, with a foreword by Carlos Santana, the book dives into the electric guitar’s place in our society, tracing its evolution in sound, style, look and purpose. Here are 10 things we learned from reading:
This is an interesting one - by fitting a MIDI pickup to your guitar you can record your performances as a MIDI track as well as live audio. This can then be assigned to any software or hardware MIDI-triggered instrument to double up or even replace the guitar part. Some DAWs now also allow the extraction of audio to MIDI data from a recorded audio part, but the MIDI pickup route is more accurate where electric guitar is concerned.
{"pageName":"[gc] pdp: gandl legacy solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114488369;;;;evar65=Used-Guitars-G&L","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
If you want to take your tracks to the next level, a multi effects processor can do the trick. For a high-end example of what one of these units can do, check out the Eventide H8000FW 8-Channel Ultra-Harmonizer Effects Processor. It supports 24-bit audio and comes with an impressive 1,600 pre-set effects. Some are even pre-customized for 5.1 surround sound, so production for home theater playback is a cinch. Its smorgasbord of I/O options includes AES/EBU, ADAT, S/PDIF and FireWire with sampling up to 96kHz, so whatever you're looking to connect to the H8000FW, it's a safe bet that you can get the job done. Of course, not all of the processors here are quite as advanced. There are plenty of setups out there that just need a straightforward solution, and if that sounds like yours, don't worry: you'll find plenty of those here as well. Take the TC Electronic M350 Reverb and Effects Processor, for instance. This single-space rackmount is easy to fit into any budget, living up to TC's reputation of delivering amazing bang for your buck. It's loaded with 15 different effects plus 15 reverbs, and even includes control software for your AU/VST environment.

Looking for Used Gear? You may have just discovered your future. Music Go Round franchisees started out as customers of our stores. They have a love of music, they love gear and they understand the industry. Most importantly they’ve taken their passion and turned it into a business they’re proud of which is an asset to the music scene in their community. Who wouldn’t want to own a business where every day they were doing what they truly love? Sound interesting?
Our private lessons in guitar, bass, keyboards, and drums are available in 30 and 60-minute sessions with flexible scheduling, so you can progress at your own pace. Maybe you'd rather be the instrument - in that case, come learn more about our singing lessons. And those are only scratching the surface of the unique services at Guitar Center Lessons in Fort Worth, which also include jam sessions, recording lessons, group lessons and more. Want to know what it's like to be in a band? Ask us about our Rock Show program, which connects you with other musicians at your skill level to get the full experience.
Description: Body: Maple & Poplar & Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple & Poplar & Maple - Neck Attachment: Glued - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Cream - Frets: 22 - Inlay: Pearloid block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ABR-1 - Cutaway: Double - Hardware: 2x Volume Control, 2x Tone Control, Grover Tuners - Pickups: Burstbucker 1/Burstbucker 2 - Pickup Configuration: H-H - String Instrument Finish: Faded Cherry - String Instrument Accessories: Hardshell Case, Certificate of Authenticity - Made In: America
We are very proud to present to you a pleasant surprise I must say from way back when folks this is prime Time beginning of that Golden Era of some of the GREATEST QUALITY Acoustic guitar that FENDER ever had the smarts to Import… that’s right these are Japanese crafted beauty’s . Built back in the day when Japan had the economy riding high while US guitar builders were getting bought out by business folks not guitar builders and US economy was in the tanker just a little brief history reminder… Fender & Gibson were under the gun to cut costs and re-structure if they wanted to stay alive and that they did…. CBS , Norlin…. And others cut back on the high quality woods they once enjoyed and relied upon the reputation the US had for making great guitars basically reputation from the late 50’s – early 60’s To about 68-69 or so…. Then quality went down no doubt…. Right then it was prime time for Japan Luthiers to strike and they did…they stepped up the quality from the funny toy grade guitars we saw here in the states back when I was a kid you could get a decent cute player electric guitar at the Pawn shop in about 1965 for about $69.00 in fact my dad bought my 1st electric guitar there for $69.00 … I loved it—it was a “ KENT” and it sounded very good threw my Silvertone amp….. ..Kent is a offspring of Greco which is a factory behind making many brands buildby Fujigen Gekki…. Ok what this Fender beauty traces back to the great FujiGen Gakki in 1974 according to its serial number… making this beautifully preserved SOLID TOP Vintage Japanese guitars 40 years old a true vintage guitar in its own right. It was during the time when this guitar was built that the Japanese Luthiers set out to make some of the most righteous guitars period… fit – finish - workmanship & materials used are the good stuff folks….. This full size Dreadnought Acoustic guitar is a replica of the Martin designed D-28 known to be one of the finest most prolific designs the US Martin & co ever produced. This Fender F310 is of a High Quality example, The top is Solid Spruce straight grained with some nice figure and wow it has 40 years of patina to its color and finish and overall vintage appeal is Very strong… I was drawn to this example it sounds deep and rich and complex with an excellent volume And its highs ring threw when cording and finger picking , This guitars Back & sides are true to the masterful D-28 desigh …. High quality ROSEWOOD just beautifully grained see the pics for more detail Its absolutely beautiful back – sides are all east Indian Rosewood the fingerboard may be Brazilian Rosewood by its looksa very high grade non theless, the bridge appears to be Ebony wood….. the Bridge is nice and flat to its top which is also nice and straight, action is very good medium low and adjustable. The top has a couple of minor doinks see the pics not bad at all and certainly nothing remotely enough to detour from its vintage Gorgeous looks , no cracks anywhere found , bindings are very food, overall this guitar is an EXTREMLY CLEAN example aside from the afore mentioned . This guitar is in top Vintage used condition and is easily a 9//10 Fit and finish I suggest this was built but a high level Journeyman and can compete or compare with A nice vintage Yairi or Morris or Gibson or Martin for that matter…. .

Paint chips and cracked binding: Common on older instruments. Over time these openings will collect sweat, polish, and dirt, causing discoloration, lifting of the edges, and further deterioration. It is best to clean these spots w/ naptha (lighter fluid)or alchohol, remove any loose edges around the chips before cleaning (they will be holding polish and grime preventing the glue from working), then seal the chips and cracks with thin superglue. Super glue can be heated in the microwave for a few seconds (plastic bottles) to make it flow better. Drop Filling is a technique for filling chips with paint. This is covered at the ReRanch site.
The ‘HSS’ refers to the pickup combination, with a humbucker and two single-coils, which is a versatile arrangement for both clean and distorted playing, especially when coupled with two tone controls and a five-way pickup selector switch. An excellent price for a good brand, and perfect for newbies. Make sure to check out the full review of this guitar.
Years of hard-earned success and fame have not changed his down-to-earth attitude. Even though he has become one of the world’s richest rock stars, he hasn’t married a supermodel or become a pompous art collector. Instead, he’s remained true to his working-class roots, spending his spare time building incredibly cool kustom cars and cruising the streets with his car club buddies, the Beatniks of Koolsville.
In the studio, a dynamic noise filter such as the Symetrix 511A, Drawmer DF320/330, Rocktron Hush or Dbx Silencer can be less obtrusive than a gate for cleaning up guitar parts to which delay/reverb has not yet been added. Very generally, such devices work by progressively reducing the audio bandwidth once the sound falls below an adjustable threshold. Transients pass through with very little change, while high frequencies are removed from the tail end of decaying sounds, which reduces the subjective hiss level. A conventional expander then mutes the signal entirely at very low levels.

I've been asked why it took so long to make this record. Well, it didn't really take too long to make this record. It took six months to make it. What I'd been doing before that was hopefully a journey I can continue. I guess what we play is still indie or alternative, I don't know all the different terms these days -- I've kind of lost track about what label I'm supposed to be these days. But it's still the kind of music I started playing when I was a kid, really. I'm fronting a band I could have fronted at fifteen or sixteen, so that's quite cool.

I lost a wonderful EMPRO les paul custom model In a plain top brown finish (it was at a friends house in Dallas Texas who died in 2002 and was auctioned off before I could get down there from Michigan). It was my first electric guitar, bought at a pawn shop in Sulphur Springs, TX in 1989. I loved that guitar and have only seen about three other Empros since then. I did not see the Empro badge on this site. Anybody know the maker?
You can reach me by phone all day(8am until 5pm) on Monday through Saturday  If I don't answer I probably have machinery running or have both hands busy but leave a message and I will call you back shortly. During off hours please leave a message and I will call you that evening or the next morning. Feel free to email me with any general questions you may have.

We took another detailed look at all acoustic-electric guitars priced under $500 available from major American online retailers, and for this update, we shortlisted 78 of them for closer analysis. We then collated over 7700 ratings and reviews from forums, videos, retailers, blogs and major music gear publications and processed those data with the Gearank Algorithm to produce a Gearank score of out 100 for each guitar. Finally we selected the highest rated guitars in two of the most popular price brackets, sub $300 and sub $500. For more information about this process see How Gearank Works.

Danelectro's new '59XT guitar was an exciting announcement at NAMM 2018, and we're stoked to have a chance to test out this sharp-looking axe. Control-wise, the guitar keeps it simple, with a three-way pickup selector switch stacked above tone and volume control knobs, but it ups the game with a Wilkinson tremolo and a lipstick pickup. Watch along as Andy tests out the Dano's sound, and look below for more information about how to get one of your very own.
American Fenders and USA Gibsons are not NOT for beginners! They are for people like myself who have invested 15+ years into developing the skills required to defend a purchase of one. IF you want beginner guitars, go see Mexico Fenders or Epiphone Guitars. Better yet, worry more about your skill and not which brand in on your headstock. I played for 11 years before I upgraded my Epiphone to a Gibson.
Acoustic has never had much of a following amongst guitar players, but they made (original company out of business) some of the best bass amps that were ever made. Advanced solid state construction and creative speaker design finally gave bass players something besides Fenders lame sound and Ampegs wall of mud. To top it all, they are durable, ask my 30+ year old 360. Mosrite and Gibson basses and Acoustic amplifiers, life just doesn't get better.

The Yamaha's FG series FGX800C is a perfectly machined instrument. If there is one thing Yamaha is known for, it's the quality of their mass-produced acoustic guitars, which people like to pooh-pooh due to the romanticization of extremely expensive handmade guitars. Yamaha has perfected this machining process to a point where you wouldn't really be able to figure out if the instrument was put together by a luthier or if it was made on a factory floor somewhere. This is the case with nearly every accessible guitar these days thanks to machines reducing errors and driving prices down.

{ "thumbImageID": "ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Vintage-Sunburst/J07390000004000", "defaultDisplayName": "Epiphone ES-339 P90 PRO Semi-Hollowbody Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Wine Red", "sku": "sku:site51415030765093", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "715.00", "priceVisibility": "1", "skuUrl": "/Epiphone/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Wine-Red-1415030765093.gc", "skuImageId": "ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Wine-Red/J07390000005000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Wine-Red/J07390000005000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51397061557444", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "715.00", "priceVisibility": "1", "skuUrl": "/Epiphone/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Natural-1397061557444.gc", "skuImageId": "ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Natural/J07390000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Natural/J07390000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51397061557414", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "715.00", "priceVisibility": "1", "skuUrl": "/Epiphone/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Pelham-Blue-1397061557414.gc", "skuImageId": "ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Pelham-Blue/J07390000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Pelham-Blue/J07390000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Cherry", "sku": "sku:site51393256933712", "price": "449.00", "regularPrice": "449.00", "msrpPrice": "715.00", "priceVisibility": "1", "skuUrl": "/Epiphone/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Cherry-1393256933712.gc", "skuImageId": "ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Cherry/J07390000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Cherry/J07390000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51415030764958", "price": "449.00", "regularPrice": "524.99", "msrpPrice": "715.00", "priceVisibility": "1", "skuUrl": "/Epiphone/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Vintage-Sunburst-1415030764958.gc", "skuImageId": "ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Vintage-Sunburst/J07390000004000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/ES-339-P90-PRO-Semi-Hollowbody-Electric-Guitar-Vintage-Sunburst/J07390000004000-00-60x60.jpg", "imgAlt": "" } ] }
On the whole, Decca sold a lot of these guitars but the timing was awful.  By 1968 the demand for electric guitars had decreased dramatically.  MCA was about to bankrupt Danelectro, and CBS was cutting all sorts of corners on Fender instruments.  Darker times were coming folks, but for a moment, let’s rejoice in the mid 60s era of records and guitars!
If it helps, Schaller have very accurate drawings of all their hardware on their website. You can also get very good drawings of all Gotoh parts as well, but theirs are harder to find (hidden in the parent company's site and I can't recall the full details). It is worth having a look at those, and pay attention to the way the tuning posts are shaped. That radiused section turned into the post is important , it really helps lock the strings firmly.
For our purposes, I’ll break pedals down into four overarching categories: 1) Boost, Compression, Distortion, and Fuzz; 2) Modulation; 3) Echo and Delay; and 4) Filtering and EQ-Based effects, and this series will focus on individual types that come within each of those larger categories (for example, Modulation includes many quite different effects, such as chorus, vibrato, phasing, and so on). This is not to say that some manufacturers or other writers couldn’t categorize things differently, and certainly a few examples below could be safely lifted out of the heading I have stuck them in and accurately described by another category. It doesn’t matter all that much. These headings are mainly a means of breaking down the sonic results of the enormously varied range of pedals that exists out there, and taking a brief look at what makes them tick.
  Korg SDD3000 Preamp Clone Great project! Since I finished it, it become one of my always on pedal! With a extremely subtle compression... Eclipse Device-2   DOPAMINE OVERDRIVE based on the Klon Centaur circuit. Materials: 01. Xicon 1% metal film resistors. 02. Kemet 5% MLCC (C0G) 03. WIMA Box Film... Refractor Black Octopus Pedalworx More build reports

Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials; for example, a guitar may have a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft-grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.
×