A DPDT (2PDT or 2P2T) on/on switch has two channels (poles), each having three lugs. This is like having two SPDT switches in one. It’s the standard configuration for most push/ pull or push/push pots, and you can use it for almost all mods, including the seven-sound mod (if you leave one pole unconnected), coil-splitting a humbucker, out-of-phase mods (by adding some jumper wires from pole 1 to pole 2), a direct-through mod, and countless others. Let’s see what’s going on here.
An acoustic-electric guitar has an electronic pickup that’s usually built into its bridge. This pickup is used to capture the sounds produced by the top’s vibrations. This is then transmitted via an onboard preamplifier to an external acoustic guitar amplifier or PA system. But plugging-in is strictly optional. Unplugged, an acoustic-electric guitar typically sounds just like a fully-acoustic guitar.
The more pedals you collect, the more you should consider investing in a pedal board as well. Some pedal boards are simply that – boards – to which you can stick your stompboxes to keep them organized. But you can also get powered pedal boards, which have built-in DC power supplies. That means no need for batteries or individual adapters connected to each pedal: just tether them to the central source, and you can power them all up by plugging the pedal board into a single outlet.
Back in the control room, audition each mic, preferably as the guitarist plays along with the other instruments. Listen carefully to how each microphone sounds on its own and, more importantly, to how it works in the mix. Usually, one microphone will come up a winner on the first pass. Don't stop there, however. Instead, leave the "winning" microphone where it is and experiment with the placement of the other two mics. Time-and mic selection-permitting, you may also wish to do a second round of testing with other microphones.
Bill Collings dropped out of medical school in the early 1970s[3] and instead worked in a machine shop for five years.[4] At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.
A rivalry sprang up between Fender and Gibson, creating some of the solid-body electrics most coveted by musicians and collectors, including the 1952 Gibson “Les Paul” model with a curved top and a combination bridge-tailpiece (the guitar was designed primarily by McCarty, with input by the famous guitarist who endorsed it), the 1954 Fender Stratocaster, and a 1958 version of the Gibson Les Paul with a new “humbucking” pickup that transmitted less background interference from electrical equipment.
MIDI connectivity has also been included, allowing you to take control of your existing synth or sampler with ease. In addition, the Helix features a 6.2 inch 800x480-pixel LCD display for easy editing, customisable scribble strips above the 12 capacitive-sensing footswitches and an expression pedal that can actually be used to edit parameters of a pedal so you don’t have to bend down and start twiddling knobs. Best of all, you can even integrate existing hardware and effects pedals in to your Helix and control them through the unit. We could talk about how this is one of the kings of the multi-effects world all day, but just watch the video below and see for yourself!

This Fender Modern Electric guitar features an apine body and mini-toggle-coil-split-switch with modern humbucker pickups. It comes with a C-shaped maple neck, a maple fretboard with 9.5-inch radius consisting of 22 jumbo frets. It has a Stratocaster middle pickup, a three-ply pickup guide and a five-way pickup switching for maximum sound control and sustains.

If you had to write a soundtrack for the 20th century, electric guitars would almost certainly be playing the tune. No other instrument defines the angry rebelliousness of the modern age quite like it. Who could forget Chuck Berry, Jimi Hendrix, the Rolling Stones, or Nirvana—some of the greatest exponents of guitar-driven rock? But if you think playing an electric guitar is all about attitude and dexterity, think again: it's actually about the science of electromagnetism. Let's take a closer look a how these amazing instruments turn electricity into sound.
NO BRIAN MAY?? The guy built his OWN guitar. He sometimes added piano wire behind the guitar strings, he was technical and had soul, and is an innovator. I personally find East Bay Ray from the Dead Kennedy's marvelous. I know he doesn't belong in this list, but any musician that has their own sound like these two deserves a mention……but yes, taste is subjective anyway.

Launch price: $2,799 / £2,399 | Body: Laminated maple | Neck: Maple | Scale: 24.6" | Fingerboard: Ebony | Frets: 22 | Pickups: 2x Full'Tron humbuckers | Controls: Bridge volume, neck volume, master volume, tone, 3-way selector switch | Hardware: Anchored Adjusto-Matic bridge, Gotoh locking tuners, Graph Tech TUSQ XL nut | Left-handed: | Finish: Cadillac Green

The CX-12 is a 12-hole, 48-reed chromatic, uniquely designed with a one-piece plastic housing and a more ergonomic slide button. It is available in several keys including a tenor-C. The standard model is charcoal black in color, but a gold colored one is available in the key of C only.[42] A variant of the CX-12, the CX-12 Jazz, has slightly different outer body features for better ergonomics, a red and gold colored housing, and higher reed offsets which aid in better tone for jazz harmonica players.[43]

\n\n Harmony branded some of their old acoustic guitars with the Nashville\nname. \n\n There was a Japanese company called Nashville\nMusical Instruments NMI \n\n I have an acoustic guitar with no name on the headstock, and\na label inside that reads nothing but Nashville. I tracked down the information\non it once. It's a cheap guitar from the 80’s, made overseas, imported by a US\ncompany that sells children’s toys now. I can't for the life of me remember the\nname of that company now. I was searching for it, with no luck, when I found\nyour question. \n\n There is also the Nashville Guitar Company NGC based in\nInglewood, TN \n\n
Washburn Guitars have a history built by skilled luthiers and musicians who share a passion for guitar. There are plenty of new modern and traditional designs, like the Washburn Parallaxe Series which has futuristic and modern voicing, great for metal genres. The Washburn Jazz Series has mellow tones and more traditional construction and playability. View all information
So many new guitarists, and even not so new guitarists, play with the volume and tone knobs turned all the way up all the time and then shell out lots of money for pedals when they are not satisfied with their tone before taking advantage of what the guitar can do (and it's a lot). Then of course, your amp's tone controls can refine things even more.
The output transformer sits between the power valves and the speaker, serving to match impedance. When a transformer's ferromagnetic core becomes electromagnetically saturated a loss of inductance takes place, since the back E.M.F. is reliant on a change in flux in the core. As the core reaches saturation,the flux levels off and cannot increase any further. With no change in flux there is no back E.M.F. and hence no reflected impedance. The transformer and valve combination then generate large 3rd order harmonics. So long as the core does not go into saturation, the valves will clip naturally as they drop the available voltage across them. In single ended systems the output harmonics will be largely even ordered due to the valve's relatively non linear characteristics at large signal swings. This is only true however if the magnetic core does NOT saturate.[45]

Silk strings and Steel strings are described as a mixture of classical and steel strings, and are also called “compound strings.”  They have a mellow sound and lower tension that provide the feeling of a classical guitar, while still providing the brightness of the metal of a steel stringed acoustic.  The term silk is referring to the nylon used to make classical guitar strings, which we will learn about next.

Popular condensers: when it comes to condenser mics for guitar-cab miking, the AKG C414 (in its various flavours — the C414 B-ULS is pictured above left) and the Neumann U87 (centre) are both popular choices. Some producers also frequently look to the U87's predecessors, the U47 valve (pictured) and FET models, and the U67.The characteristics that producers most often seem to be looking for in these mics are their extended frequency response, especially at the low end, and the slightly softer, more diffuse sound imparted by the large diaphragm. These mics also tend to boost the 5-15kHz region, but this boost is rapidly lost as you move off-axis (it is inherently difficult to design a large-diaphragm capsule with an even off-axis frequency response).
 Everybody needs to start somewhere. However, where you start often decides where you end up. For example, if you buy a bad guitar when you start playing, you are a lot more likely to stop playing, and if it happens, you wouldn't be buying any more guitars. We believe guitar manufacturers have a sort of duty to make and supply reliable guitars for beginners. Guitars at beginners' level are as important as high-end guitars for pro. This is where Smash comes in.
* P A W N S H O P * G U I T A R S * Serving The World With Quality Vintage and Used Gear!- Up for sale is a 1960'S Norma Guitar Japanese Vintage Project As Is!- Good Japanese project- missing nut, bridge, knobs, electronics need work, but pickup is ok- very noisy- lots of body checking and neck needs work- truss barely turns- missing tuner ferrules- head stock logo is loose- even if I forgot something this item is sold as is with no returns!- this is definitely a worthy project- from the MIJ Hay... more
There was a time when Yamaha were thought of as just a guitar maker for students and beginners - but those days are long gone and Yamaha now produce quality acoustics that compete favorably with the best in this category. The LL16 is a great example, with it's all-solid wood body and built in pickups with preamp, this is a true workhorse instrument. Having premium level specs at mid-tier pricing is like a dream come true, the main reason why we consider the LL16 as the best value for money acoustic in this section.
While styles and models may vary, electric guitars operate on the same general principles. The pickup mounted on the electric guitar’s body functions as a magnetic field. When a metal string is plucked and vibrates, it generates a current. That current is transmitted by the pickup through a preamp circuit with tone controls to the guitar cable, and in turn to the amplifier. The amplifier boosts the signal and modifies it with various tone controls and effects, depending on the amplifier's design and capabilities. The signal is then output to a speaker, which converts it to sound waves. The type of pickup(s), tone controls, strings, playing techniques, and other factors built into the guitar's design all influence the signal that is sent to the amplifier. In short, each component of the guitar affects how the guitar sounds.
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
Kingston guitars were built in Japan and imported into the U.S. by Jack Westheimer, who was an early pioneer of importing and distributing Japanese instruments during the late 1950s and 1960s. At first, Kingston guitar models were limited to acoustics that were similar in style to Harmony’s Stella line. Westheimer’s electric line at the time was built in Japan by Teisco and branded as such before the name changed to Teisco Del Ray. By the mid-1960s, however, Westheimer was no longer importing Teisco (or Teisco Del Ray) guitars, and he turned his attention back to the Kingston trademark, but added electric guitars this time.
Hey Frank i removed the pick guard and discovered why they were so tall.I just bought the guitar the day i asked you about it and it was late very late after midnight and i found out someone used pick guard screws to just secure them to the PG…lol And i have it back together correctly installed now.No pictures yet here is a better detailed description.The body is solid wood stained factory dark cherry.Rosewood fretboard semi-enclosed tuners…SSS P/U arrangement in a 3 ply black PG and 5 way switch and probably weighs 8 lbs.Thanks ….Larry
This site is dedicated to all you guitarists out there who ever owned an old Japanese Teisco guitar, especially those of you who started out with one and still have it today. I created this site out of frustration at not being able to identify the model of my first Teisco despite my best online and off-line efforts. I found out (eventually!) that it's an SS-4L made some time in the early/mid 60s.
That is not always the case with acoustic electric ones, especially with piezoelectric pickups since they pump out a relatively high amplitude signal. All you really need is a small DI box that will attenuate the signal a little, and you plug the guitar straight into a mixer. Naturally, how good this is going to sound will depend on your guitar's preamp.

Martin Guitars has a storied history that dates back as far as the mid-1700s when Christian Frederick Martin was born to a family of modest German cabinet makers. At the age of 15, Christian Frederick traveled to Vienna and took up an apprenticeship with a renowned guitar maker, where he flourished in his craft. Years later and after a feud with the Violin Makers Guild, Martin decided to move his business to the United States, opening up shop in New York City. More than 100 years later (and through many trials and tribulations), Martin introduced their signature Dreadnought acoustic guitar, the same shape as the one pictured above. Funny thing is, it was actually based on a defunct style created by another company years prior. Now the standard for acoustic guitar shapes, nearly every manufacturer offers a version of the instrument made popular by Martin. Currently, the brand is run by Christian Frederick Martin IV, the 6th generation of the Martin family – and they’re still making some of the best instruments in the world.
Every electric guitar has a series of electronics that give the guitar its unique sound. Fender guitars signature sound comes from their five-way switches and single coil pickups where as Gibson Les Pauls comes from their three way selectors, multiple tone knobs, and humbucker pickups. Many other aspects of electric guitars affect the tonal qualities of the instrument, but the electronics cannot be overlooked. In this article, I will talk about different electronics in electric guitars as well as some common repairs. For more information about electric guitar pickups, see the electric guitar pickup page.
Because most electric guitars offer far more adjustability than acoustic guitars, the setup and adjustment of the guitar is more important than it is with acoustics, which don’t have much to adjust. We decided John and I would test the electrics first right out of the box, with their stock strings and factory setup, then get a professional to set them up with Ernie Ball Regular Slinky strings in gauges from .010 to .046—for decades, this has been one of the most popular string sets for electric guitars. Our setup technician was Avishay Shabat, who heads the Guitar Groomer repair shop in Woodland Hills, California, and who also manufactures his own line under the Shabat Guitars brand.
While the Vox lineup features modern marvels such as the Valvetronix modeling amplifiers, this company is really all about smooth tube overdrive. The AC30 is a rock classic, and one of the most legendary amps ever made. It’s still going strong today, but there are many other Vox models to choose from as well, all built around that amazing Vox tone.
Automatic Track Creation & Loop Recording: A new layer (track) is created each time you start recording and each time a Riff loops. Stack layers on top of each other (bass, guitar, vocals) to create a Riff. Use looping to create multiple tracks, do multiple takes, etc. Each layer has controls for mixing and effects. (4 tracks with T4, 24 tracks with Standard)

The tone from a Bourgeois produced with master grade Cocobolo wood using hot hide glue is superior to any guitar I have played, I can get an incredible reverb sound by applying a light percussion on the body with my forearm, this guitar is expensive but worth it. I believe Bourgeois builds 400 guitars per year, the other major producers production is 400 guitars per week.
Aside from the superstrat ESP M-10 shown earlier. The ESP LTD EC-10 is also an affordable guitar but with a different body design derived from the Les Paul. The features of this LP inspired guitar that makes it different is the bevels on the body and belly cut at the back for comfort. Its major resemblance to a Les Paul is the humbuckers pick-ups equip on the guitar. Together with the bridge design for having a stopbar and tom bridge without a whammy bar.
You probably won’t have to do this, but if you do, here’s how to go about it: First, slacken the affected strings and move them to the sides of the saddles. Then take some needle-nose pliers and remove one end of the retaining spring (different styles of bridge will use different types of retaining spring – sometimes there is an individual one for each saddle, in which case you might even need to remove the whole bridge to do this).

Home>Guitars, Amps, and Effects >Electric Guitars >Electric Guitars: 6-String PrintRefine your searchBy BrandCharvel (26)D'Angelico (28)Dean (32)Epiphone (65)Ernie Ball Music Man (30)ESP (67)EVH (7)Fender (141)Fret-King by Trev Wilkinson (3)Gibson (118)Godin (2)Gretsch (49)Guild (11)Hagstrom (9)Hamer (5)Ibanez (122)Jackson (54)Kramer Guitars (4)Line 6 (6)PRS Guitars: Paul Reed Smith (47)Reverend Guitars (9)Schecter (51)Squier (23)Steinberger (2)Sterling by Music Man (15)Supro (3)Taylor Guitars (6)Washburn (1)Wylde Audio (5)Yamaha (5)Play as you Pay® Eligible4-Payment Plan (542)6-Payment Plan (921)8-Payment Plan (885)12-Payment Plan (743)By Price$100 - $149 (5)$150 - $199 (19)$200 - $299 (24)$300 - $399 (60)$400 - $499 (73)$500 - $749 (183)$750 - $999 (233)$1000 - $1999 (245)$2000 - $2999 (93)$3000 - $3999 (65)$4000 - $4999 (34)$5000+ (13)Availability In Stock Items (860)Clearance Gear (229)By ConditionNew (914)Blemished (221)Scratch and Dent (18)Viewing products that ship to: Customer Kudos "zZounds is the best online company I've ever dealt with hands down." - Customer on October 21, 2017 1 MILLION+ Happy Customers learn more Guitar·Bass·Keyboard·Recording·Computer Audio·Live Sound·Drums·DJ·Accessories

But older guitars are not always better than new guitars; they can have unreliable parts, or be difficult to maintain. A lot of these are upgraded to make great players grade instruments. Keeping the essence of the original vintage guitar, but adding a little of today's reliability. A great example is the 1960s Gibson Melody Maker; an all-mahogany set neck guitar with Brazilian rosewood fingerboard and beautiful nitrocellulose finish. Well-built by Gibson, in their Kalamazoo factory, but with very basic pickups, tuning keys and electronics. Upgraded examples are everywhere, and are exceptional value as players grade instruments. Then again some guitars, especially early Japanese and European models aimed at the student guitarists of the early 1960s are completely unplayable. Even the cheapest modern day guitars put these to shame. Before buying any vintage guitar it is a good idea to know exactly what you are buying!
Now, since I have started on my wishlist there is another thing that I would like to add. I have seen multi angle videos that include a shot the finger board from the point of view of the player. Looking at this video angle it shows the fingerboard from the same angle as when you are playing it yourself. This is a great view as you do not need to translate what you see mentally. You see it, you play it the same way.
Original plate reverbs were mechanical in nature. There was a literal plate inside the amplifier, which would transform input signal into vibration. Then you would have a pickup located somewhere near the plate, that recorded those vibrations. Today, such a contraption comes across as relatively crude, but many still love the unique mechanical sound it produces. Spring reverb uses a pretty much exact same principle, only this time you have a spring in there instead of a plate. The biggest improvement a spring reverb offers is reduction in both weight and size of the device.
Decide between mic recording or using a direct box (DI). Recording the sound of your electric guitar by miking your amp is a great way to simulate studio quality sound. However, this will require expensive equipment, like a quality amp, microphone, and potentially sound dampening equipment or material. On the other hand, you can plug your guitar right into a DI to record your guitar.[1]
New York City native Joe Charupakorn is a guitarist, author, and editor. He has interviewed the world’s biggest guitar icons including Steve Vai, Joe Satriani, Yngwie Malmsteen, Carlos Santana, Neal Schon, and Dave Davies, among many others, for Premier Guitar. Additionally, he has written over 20 instructional books for Hal Leonard Corporation. His books are available worldwide and have been translated into many languages. Visit him on the web at joecharupakorn.com.
A more successful early electric was the Ro-Pat-In "Frying Pan" guitar. This was played lap-steel style, and was the earliest I know of that uses something close to the magnetic pickups as they exist in modern guitars. This was conceptualized by George Beauchamp in 1931... he played Hawaiian style, thus the lap steel design. He met Adolph Rickenbacker and together the two worked out the details of the pickup system, and put this into production in 1932... the company name was eventually changed to "Rickenbacher".
I have one of these and what I like about this guitar are the little touches. The arch top and binding helps set it apart from other guitars around this pricepoint, as does the black chrome hardware. Schecters are enormously comfortable guitars to play and their finish work is excellent. This is a lot of guitar for the money, but you can upgrade twice within $500 with the Omen Extreme-6 and the Omen Extreme-6 FR, depending on your needs. After owning mine for a few years, I tossed a couple of Seymour Duncan Antiquity pickups in it to give it a serious upgrade and more longevity.
Feedback is essentially the presence of a sound loop where the guitar’s amplified sound causes increased vibration in the strings. The sound of this vibration then gets further amplified, continuing the loop and resulting in distorted sound. Usually the source of the feedback is the guitar’s amp, but in cases of hollow-body guitars, the amp’s output resonates in the actual guitar body. For many music styles feedback is an undesirable trait, but it’s also been used as an awesome effect by prominent guitarists such as Jimi Hendrix and Kurt Cobain.
Regardless of the invention debate, it is clear that former radio repairman Leo Fender was the first to mass-produce and sell a successful solid-body Spanish-style electric guitar. His company’s simply constructed 1950 Fender Broadcaster (renamed Telecaster as the result of a trademark dispute), with its flat body and a neck bolted onto it, was initially derided by competitors as too simple and lacking in craftsmanship. Gibson’s president Ted McCarty dismissed it as a “plank guitar.” Yet everything about its patented, practical design was optimal for mass-producing an inexpensive solid-body guitar, earning Fender the moniker “the Henry Ford of the electric guitar.”

Look at the action. Action is the distance between the fingerboard and the string at any given time. Make sure you hear no buzzing from the guitar when playing a note at a normal weight. Try it at the 5, 10, 12, fret, etc. and listen for the 'buzz' of strings banging on the frets below it. If any guitar is like this, ask the music store (any good one will do this for you) to adjust the neck if you can try it out in playable condition. If they can adjust it for you, then there is no problem, it just needed adjustment.

Probably one of the greatest is Glenn Schwartz, formerly of the James Gang and Pacific Gas & Electric. Considered to be a "white" Jimi Hendrix, he was asked by Jimi to play at what was to be his last birthday party. Glenn played behind his back and with his teeth (now with his gums) before Jimi ever did. Now out of the limelight (and out of his mind) Glenn plays (and preaches) on Thursdays at a blue collar bar in Cleveland. ONE F*CKING INCREDIBLE PLAYER. Should be on any list.
One other effect that depends on EQ modulation is the wah pedal. As you rock forward on the pedal, the sound becomes more trebly. As you rock back, the treble range is muted. In the middle positions, a wah produces a nasal, midrange-heavy tone that is interesting and useful in its own right. Since you can change the wah's tone constantly while you're playing, it's a very dynamic and expressive effect that can become an integral part of your playing. Jimi Hendrix was one of the first guitarists to exploit the wah’s capabilities.
Previously, Epiphone guitars were considered to be the biggest competitor of Gibson. However, they were later acquired by Gibson who has retained the name of this brand to distinguish them from their pricey brothers. You can certainly consider it a budget-friendly production from the high-end guitar makers. Epiphone, just like the Gibson’s Les Paul, shares the same design but is available at a much lesser price. When it comes to craftsmanship, then we must say that Gibson is much better than this one. Unfortunately, Epiphone utilizes low-quality products such as mahogany and other electronic components.
The other switches you might find on a guitar can change the wiring of the pickups from being in series or parallel , or to switch the phase so the pickups are in phase, or out of phase. All the switches are there to allow you to change the tone of the guitar.  Those switches can be toggle switches, or push-pull switches built into the volume or tone control knobs.
1976 Fender Stratocaster, Some changed parts to include,pickguard, tuners,possibly knobs. Original factory natural finish, fret wear, plays but will need a refret at some point,Comes with a non original black tolex hard shell case. No backplate or tremolo arm. Overseas clients PM me for accurate shipping quotes as free shipping is only to a lower 48 US address. Trades may be considered.      SEE MORE HERE .

At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.

The MC5 was founded by guitarists Wayne Kramer and Fred “Sonic” Smith, friends since their teen years and veterans of the Detroit garage rock scene. They honed a two-guitar attack that owed much to the heavy rock sounds being popularized at the time by acts like Cream, the Jimi Hendrix Experience and Led Zeppelin. But Kramer and Smith laid down their riffs with more reckless abandon and a greater sense of desperate urgency than any of those groups.
: I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...
Their are also guitars made with a "compound radius", which is a little rounder in the lower register, and a little flatter in the higher register. The true best of both worlds. Warmoth makes necks with a 10"-16" compound radius, as do some production guitar companies. I have a custom made guitar with a 16"-24" compound radius, and it's REALLY flat. Takes some time to get used to. It's breeze to rip on, but not nearly as comfortable to play rhythm on as my other guitars.

Gibson ES-335 Figured Electric Guitar The Gibson ES-335 thinline archtop semi-acoustic electric guitar is a popular choice among blues, rock and jazz musicians because of its warm tone and near-zero feedback. The 2019 Gibson ES-335 Figured model features a thermally engineered chambered maple center block, a hand-wired MTC Premiere control assembly, an ABR-1 bridge with titanium saddles and all-new MHS II humbucking pickups.

I've been to a PRS factory and seen the precision and skill with which they are made. Their quality control is incredible: they test each one individually and make adjusments until it is perfect. They won't let a bad one get through so if you buy a PRS guitar, you are guaranteed a high quality guitar. I mean, with the high price you pay, how could they not be wonderful? Plus, they sound, feel, and look amazing. (I also got to see Paul himself; it was pretty cool. What a nice, humble guy.)
1928 to 1967: Tortoise grain celluloid pickguards glued directly to the top, clear finish then applied over top and pickguard. Due to extreme shrinkage of celluloid and lacquer, this often causes a "pickguard crack" in the top. Pickguards became "standard" in 1931 on most models, but some martin guitars had them as early as 1928. The OM series was the first model to consistently have a pickguard in 1930.
The XB-40, (short for Extreme bending-40 reeds), is unlike any other diatonic made. Released in 2003, it was specifically designed by harmonica specialist Rick Epping to simplify proficient bending of the notes. To make this possible, the XB-40 uses forty reeds as opposed to the usual twenty found in most ten-hole diatonics. With these bending capabilities, the XB-40 gives access to all the notes on the chromatic scale through bending the natural tones of each hole. This model was discontinued in 2013. Shortly before production officially ceased, Suzuki Music released a similar model the SUB-30.[28]
Thinking out loud... what defines electronics then? I've always assumed that the pickups, caps, pots, etc. inside an electric guitar constituted an electronic system. The "guitar's electronics" facilitate a deliberate flow of electrons through a circuit with semi-conductors, etc. Heck, with coils and magnets (and sometimes battery packs), they also provide the electricity that's conducted through the system.
For an experienced guitarist, the choice of amplifier is personal and a major part of the guitarist’s sound. But most of our panelists thought that, for a beginner, it’s most important for an amp to offer a variety of good sounds so that they can find what works for them and make adjustments as their style and taste evolve. As Ken Rosser put it, “If a kid’s starting out and they’re really into Pantera, they’ll love an amp that gives them that sound, but next year they might discover Eric Clapton and want a different sound.”
That really depends on what you are going for. There are good arguments for before everything and right after the tuner, but also for after the distortion and before your modulation pedals. If you put yours right after the tuner in the front of your chain, you can equalize your guitar tone before it hits anything and adjust your pedals accordingly.
Fender’s arm when it comes to affordable quality guitars is the Squier. The Affinity Stratocaster is no push over. It has an ergonomically design contoured double cutaway body made of alder and has the C-shape all maple or with rosewood fingerboard neck patterned over an original Fender which contributes greatly to the guitars comfort and playabilty.
Cadsoft Eagle is a very popular tool with pedal builders. A basic version can be had for free. There are limitations on board size and number of layers in the free version, but these won’t come in to play for the majority of basic analog effects pedals.  Element14  includes a host of documents and tutorials.  If you get into complex designs or full professional use later,  full versions of Eagle, at time of writing cost $575, and $1640.
This Japanese company produces a wide range of musical instruments, but the real draw for guitarists will be with beginners and intermediate players. Yamaha offers a solid selection of products at a price that is more budget friendly than some of the other entries on this guide, making it a good place to start for players getting their first guitar.
The volume knob can act as a boost which can take your guitar from clean sounds for rhythm playing to dirty overdrive tones for soloing. When playing a song keep your volume knob at 6 or 7 when playing chords or verse parts and when it’s time to deliver a rockin’ solo roll up the volume to 10 and you will not only hear a boost of gain (overdrive) but also a volume lift over any other instruments in the song.

Initially inspired by his older brother Jimmie, Stevie picked up the guitar at an early age and was playing in bands by the time he was 12. By the time he formed his legendary trio Double Trouble in 1980, Stevie Ray Vaughan was already a legend in his adopted hometown of Austin, Texas. After hearing and seeing Vaughan playing at Switzerland’s Montreux Jazz Festival, pop icon David Bowie invited Stevie to play on his Let’s Dance album. Vaughan’s career took off form there.
The Dobro All-Electric featured a pickup purchased from the fellow who’d invented it in ’32, Arthur J. Stimson of Seattle, Washington (it was not invented by Dobro’s Vic Smith, as has been reported elsewhere). This was, as far as we know, the first modern electric guitar pickup, with the magnet under the pickup, rather than over the strings, as on Electro/Rickenbacker instruments (or the presumed “transducer” on the ’28 Stromberg-Voisinet). Stimson’s pickup had a large horseshoe pickup in the body with two coils, one for bass and one for treble strings, each with its own bar polepiece. A 1/4″ jack outlet sat on the top down near the standard stamped National trapeze tailpiece, next to a single volume control.

Being one of the reputed organizations, operating in this domain, we are engaged in manufacturing and supplying a quality range of Gigmaker Electric Guitar. We only use high grade components and latest technology while designing these guitars. The offered range is widely appreciated all over the nation for its salient attributes. With our quality range, we
A variation on Drop E, A with the G flattened one half step to F♯; this tuning is identical to 6-string Drop A, with two E strings added: one above, and one below. Like Drop E, A; this tuning allows easy fingering on the E since it is a standard fourth interval below the A. It also provides three high strings a fourth apart instead of the usual two. The tuning is used by Infant Annihilator on their album The Elysian Grandeval Galèriarch. A 7-string variation of the tuning without the high E (E-A-E-A-D-F♯-B) was used on their previous album The Palpable Leprosy of Pollution and is used by Enterprise Earth/Delusions of Grandeur guitarist Gabe Mangold.

Bought an ovation a couple of years ago and it hasn't failed me yet. Mine's a fairly lower in the range Ovation Celebrity, but it's excellent. One of the most comfortable feeling guitars I've ever held, good projection, nice tone, even been known to out do a Gibson further down the neck. Plus bonus feature is that it does sound so much clearer and warmer out of the amp

Vox had experimented with Japanese manufacturers at the end of the sixties with the Les Paul style VG2, and in 1982 all guitar production was moved to Japan, where the Standard & Custom 24 & 25 guitars and basses were built by Matsumoku, the makers of Aria guitars. These were generally regarded as the best quality guitars ever built under the Vox name. However, they were discontinued in '85 when production was moved to Korea and they were replaced by the White Shadow models, although a number of White Shadow M-Series guitars and basses are clearly marked as made in Japan, suggesting a phased production hand-over.
He’s sauntered down through the decades unfazed by stints in jail and hospital, heroin addiction, assorted femmes fatales, copious boozing, rampaging Hells Angels and assaults from fellow icons like Chuck Berry and Peter Tosh. Unconstrained by the grinding gradations of clock, calendar, public morality or legal prohibition, he has defined life on his own terms.
But the avant-garde din of Velvet Underground rave-ups seemed a genteel curtain raiser compared with the full-bore cacophony of Lou’s 1975 solo opus Metal Machine Music. The noise-guitar side of Lou’s legacy set the stage for cutting-edge genres like industrial, art damage, dream pop, grunge and present-day noise exponents, like Wolf Eyes and Yellow Swans.
There were differences between the pickups as well – the National had slanted units under enormous covers, while the Supro featured 8-string versions of the Alnico V pickups found on many Spanish-style guitars. The difference in tone proved to be minimal. The Supro has a more refined sound than its cheaper cousins with the famous string-through pickup, but it can still be raw and biting when required. Although it is a single-coil pickup, it has excellent hum rejection and sounds wonderful either overdriven or clean. The guitar has plenty of sustain and a surprising level of output, making it an excellent instrument for rock and roll as well as country music.
The first thing to do is to cut out a piece of copper foil slightly larger than the bottom of the electronics cavity.This way the edges of the foil will go up the sides of the electronics cavity a bit. Next cut out strips of copper foil slightly wider than the depth of the cavity, and form them along the sides. When you are finished, it should look like the photo on the left.
Boss is an effects legend, but thanks to the digital expertise of parent company Roland, the brand now also has an amp that promises organic, valve-like tones at an impressively low price. It does this by using the same Tube Logic technology employed in last year’s 150-watt Waza Craft head, and other Roland amps. The K100 doesn’t invite direct comparison with specific amp brands and models. Instead, there are five generic voices: Acoustic, Clean, Crunch, Lead and Brown. You can pre-load 15 different effects types into the amp, with 55 to currently choose from when you link the Katana to the Boss Tone Studio application. The Katana may look plain, but its tones are truly exceptional. The Crunch voice is responsive and dynamic, while the Brown solo sound is as good as many USA valve-powered competitors. Start using the Tone Studio editor and the Katana’s edge becomes sharper still, with different effects chain presets and assignable control parameters.

From Clean to Modern, chose from 8 amp settings, four modulation effects and four delay/reverb effects, with tap tempo. Its Hi-Fi sound can be sculpted by a three-band EQ, giving it a lovely spacious sound distribution; and special off-stage circuit gives it excellent overdrive qualities even at low, discreet volumes. Finally, its sleek designer looks will fit into any living space, especially with its soft tube glow.
This is a more muffled bass, suited for blending in or behind distorted guitars but useful for any situation when a bass sound without so much clarity is needed. It is also a much smaller file than the rest. Originally I made this just for my own personal use but decided it might be useful to others as it fits some pieces where the washburn bass doesn't.
This Gibson Skylark Tweed has recently been totally overhauled. I will send the repair ticket dated 10/9/2018 with the amp. It states: Replaced transformer wired to spec. Tested tubes - good to new. Replaced all dead filter caps, installed terminal strips. Replaced power chord w/3 prong grounded plug. Replaced leaking coupling caps and bypass cap. Replaced cathode resistor. Cleaned and deoxidized jacks and pot. Replaced fuse. The speaker is not original but sounds fantastic. Don’t pass up this vintage jewel.
.From its G logo cattle brand on top, to the fence rail pickguard graphic, the Chet Atkins Gretsch cowboy'd up big time with cactus, cattle, rifle and arrow inlays inscribed right into the mother of pearl. This 6120W  Reissue combines many of the most desirable features of this longtime favorite. Twin Filter-Tron pickups offer lively, hum-free performance, with master volume and tone controls for ease of operation. See pics,pricing and info here
Those influences helped him develop a truly unique rhythm guitar style that no one has been able to duplicate since. Perhaps the coolest thing about Joe Strummer is no one could ever predict what he would do next. In 1981, the Clash played 17 consecutive nights at the 3,500-capacity Bond’s International Casino nightclub in Manhattan, but when they returned to New York the next year they played two sold-out shows at Shea Stadium as an opening act for the Who.
Often the names and appearances of these pedals will give you a clue as to what types of sounds they produce. Otherwise it's a good idea to look at interviews and endorsements to learn which distortion stompboxes your guitar heroes are using. Also, be sure to check out our videos and audio clips to get a sense of each distortion pedal’s capabilities.
The 1964 TRG-1 was a slightly more asymmetrical variant of the WG body style, with offset double cutaways and offset waists. It had the squared-off Bizarro Strat head introduced in ’63 and rectangular-edge fingerboard inlays. The tail was a primitive top-mounted trapeze. Most of the face of the guitar was covered with a large metal pickguard, which had one two-tone neck pickup. The volume and tone knobs were above the strings, as was a small sliding on/off switch for the amp. In the off position, the guitar played out as a normal electric guitar. Horizontal grill slots were cut into the pickguard, behind which sat a 3-inch speaker. The amp operated on two 9-volt batteries installed in back. The TRG-1 shown in the subsequent ’64-65 catalog had a new, hooked headstock, but all the examples I’ve seen have the squared-off Bizarro Strat head. Also, the model I have has a TRE100 designation on the back sticker, so at least some were called this.
As similar as the two instruments are, bass guitars have enough differences from electric guitars that bassists should definitely look for effects designed specifically for their instrument. By doing that, you’re getting a pedal balanced for the low-frequency dynamics of the bass, and built to help it blend better with the other instruments in the band. Many bass effects have the same purposes as guitar effects described above, including chorus, reverb, delay, phaser and tremolo.
Featuring the Wilkinson WTB Bridge this classic 3-saddle design has been around for over 50 years and is still regarded as the ultimate tone machine. Staggered brass saddles offer individual string intonation never before available in a design of this type. The baseplate itself is a faithful reproduction of the original, made from steel, very important in a bridge of this style due to the tonal effect it has on the magnetic field of the pickup mounted in it.
On paper it looks fantastic for the money, but having Google'd it I found some people were less than happy with the fit & finish. But I value the opinions of my fellow MLP'ers a bit more than those found on some other forums so I'd like to hear what you all think. Aside from the electronics, which I'd replace, how is the quality of this instrument? Is it as good as the singlecut models?
Let’s start off with a real classic for a classic player! This Fenders vintage modified style Strat hss has captured the happy way of the 50’s, available in Surf Green, Daphne Blue and Fiesta Red and it’s a guitar that just makes your life a litter bit more worth living. The design is very much like the 1950’s electric guitars, from the soft V-shaped neck, maple fretboard and 8-hole pickguard down to the smaller things, like the knobs and the switch tip- everything just brings us back!
You can divide these further into cabinets and combos. A cabinet is simply an amplifier without a head. The head is all the knobs and so on that can be tweaked to produce variations in tone and volume. Combos include the head, so they're often preferred as they're easier to port around. However, if you want a multi-speaker setup, you'll want to opt for cabinets with separate heads.
Dan Erlewine first saw this Tele back in the 1960s, before Mike Bloomfield recorded with it on Bob Dylan’s Highway 61 Revisited album. That was also before Bloomfield and Dylan were booed for going electric at the 1965 Newport Folk Festival. And before Bloomfield recorded the first Paul Butterfield Blues Band album with this guitar. There’s a lot of history in this Telecaster!

Tailpieces are the end of the highway for guitar strings. Or maybe the beginning, since strings are first threaded through or over tailpieces, or pegged into them, before they are pulled along the fretboard for their big meeting with the tuning pegs. Essentially their function is to anchor the strings, which means most guitar tailpieces must be strong enough to withstand the combined tension of at least six strings without lifting off.
Here we have a very nice example of the Yamaha Red Label fg230-12... This example is in very good - excellent original condition. The woods used on this guitar are of a very high grade ... spruce top, Honduran Mahogany back, sides and neck please see pics for the details but very nicely grained woods!... workmanship is impeccable... the guitar plays like a real with very good action and the intonation is set dead on... The neck is solid Mahogany and is slightly beefy..I love the feel of this guitar and when you hear is you will be in 12 string heaven... no cracks or repairs ... the condition is vintage used its about 40+ years old you know ...with several minimal scratches but still overall a very beautiful vintage guitar. The wood has aged and mellowed with time to yield a wonderful rich tone only a 30+ year old quality instrument can offer. This one has that quaity rich sound along with the playability with the right aging now and with its beauty ...its a no brainier... Also available is a cool $100 vintage hard shell case see pics Thanks for your interest!.
Being part of Schecter's upper tier guitar line, this one comes packed with premium appointments, including a nice looking arched quilt maple top that follows the double cutaway shape of the mahogany body. It also has a 3-piece set mahogany neck that can withstand angry riff playing while the ultra access heel allows for easier upper fret access when you want to hit your audience with high note solos. The guitar has a Sustainiac Humbucker on the neck (known for long sustained notes) and the high output EMG 81 Active Humbucker that's great for metal riffs. Other features include Floyd Rose 1000 Series Tremolo, 25.5" scale length and 1.625" nut width.

Guitar signals cutting out is a very common symptom of a simply wiring problem. Usually when your guitar cuts out, it means that you have a loose solder somewhere. Your guitar will sound fine when the solder connection is joined, but your guitar will cut out when the loose wire disconnects for the lug. Broken solder joints are common on electric guitars especially when your output jack becomes loose and rotates in the pocket. That is why it is extremely important to keep your output jack tight and secure at all times. If your output jack is loose and rotates, it will probably break the wiring connections inside the guitar. Luckly, loose connections are easy to fix. The only problem is trying to find them.
Just bought a Martin D-18GE beautiful sunburst from Franklin Guitar today and was absolutely blown away by the hospitality, friendly atmosphere and knowledge I was met with. I've never written a revie...w before but this place is so good it deserves praise and recognition! I would recommend anyone who wants to buy any level of guitar with all ranges of experience to go check out Franklin Guitar! From beginners to professionals, this little place has what your looking for and will no doubt be a joyful experience. Thanks Pat! See More
The world is full of guys who will zero in on all the details they find inferior about this guitar by noting the rather obvious fact that this is not a Gibson Les Paul Standard costing $3,000.00. There are some people who will complain that this guitar has a bolt on neck. True, the set necks of the more expensive Epiphones and Gibsons are nicer. But, considering the fact that every Fender Stratocaster ever made had a bolt on neck, is this really a big deal? Would Jimi Hendrix have played "Purple Haze" better if his Strat had a set in neck? Probably not.

Being the go-to instrument of popular guitarists like Hank Williams Sr. Neil Young and Jimmy Page (just to name a few), the current production model D-28 continues the Martin Legacy in terms of build and sound quality. Finally, all these features are provided without the inherent maintenance issues and crazy price tags of actual vintage models. If you're looking for a true traditional acoustic then your best bet is to go for the Martin D-28. The MSRP is $3299 but you can get it online for around $2,629.
Emil Dopyera (also known as Ed Dopera) manufactured Dobros from 1959 under the brand name Dopera’s Original before selling the company and name to Semie Moseley. Moseley merged it with his Mosrite guitar company and manufactured Dobros for a time. Meanwhile, in 1967, Rudy and Emil Dopyera formed the Original Musical Instrument Company (OMI) to manufacture resonator guitars, which were at first branded Hound Dog. However, in 1970, they again acquired the Dobro name, Mosrite having gone into temporary liquidation.
• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.
{ "thumbImageID": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "defaultDisplayName": "Ibanez AEG10NII Nylon String Cutaway Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51351266816534", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black-1351266816534.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tangerine", "sku": "sku:site51351266816747", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine-1351266816747.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine/H90907000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine/H90907000002000-00-60x60.jpg", "imgAlt": "" } ] }
Many experiments at electrically amplifying the vibrations of a string instrument were made dating back to the early part of the 20th century. Patents from the 1910s show telephone transmitters were adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge; however, these detected vibration from the bridge on top of the instrument, resulting in a weak signal.[2] With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.