Firstly these are both 'mic-level' or 'instrument-level' inputs (they carry very quiet signals) but hi-Z signals are more prone to interference. The lo-Z signal consists of the instrument's mono signal (hot) and it's inverted waveform (cold), the cables are twisted around one another such that any interfering signal generated in one is negated by the other (much the same as the way a humbucking pickup works).

This is a 'basic' guide that allows you to methodically set up a guitar that has no major problems to begin with. This will not tell you how to do a neck reset on an acoustic, or shim an electric bolt-on neck for instance.The guide is cheap, effective and very informative, considering the pittance of a price being paid for it. This author obviously loves guitars and has a commendable desire to not only be able to make all the BASIC adjustments for themselves, but also to briefly and effectively explain WHY the adjustments work.
GUITAR RIG 5 PLAYER is based on the powerful GUITAR RIG 5 PRO, providing you a straightforward and easy user interface with professional components. The advanced tag-based preset browser makes it easy to find and organize your effect settings. Drag and drop components to the rack to create custom effect chains, and adjust all settings to your needs in no time.
Many players today have more than one overdrive/distortion stomp box on their pedal boards and sometimes use both at once. My personal preference is to place the lower gain pedals in front of the higher gain ones, but the opposite is absolutely fine if you prefer the sound of that configuration. Placing overdrive/distortion pedals later in the signal chain can increase noise as the noise of several effects chained together can add up, and any noise produced by other effects going into an overdrive/distortion effect will be boosted along with the guitar signal.
The slide part on that track was quite difficult to simulate, but again, the guy I have playing in my band, that I've been playing with for a while, can do it, and he and my son are the only two guys I know that play it right. Recently, I had Ronnie Wood playing with me, and he did a good job with it. I think if you have your head on it, it can be done.

ok thank you so much! Unfortunately, it’s not as loud as the other single coils of my strat. I tried splitting to the other coil but doesn’t split. I followed the wiring diagram bit by bit. =( Thank you so much for responding right away. I’m a session musician here in our country and this is actually my first time to mod my guitar. Thank you so much!


The Les Paul guitar line was originally conceived to include two models: the regular model (nicknamed the Goldtop), and the Custom model, which offered upgraded hardware and a more formal black finish. However, advancements in pickup, body, and hardware designs allowed the Les Paul to become a long-term series of electric solid-body guitars that targeted every price-point and market level except for the complete novice guitarist. This beginner guitar market was filled by the Melody Maker model, and although the inexpensive Melody Maker did not bear the Les Paul name, its body consistently followed the design of true Les Pauls throughout each era.
This is another classic in Fender's guitar roster. The Squier by Fender, Vintage Modified '51 is another example of how phenomenal Fender is as a company. This guitar is capable of producing versatile tones because of the SH pickup configuration and rotary pickup selector. The neck of this guitar is C-shaped which makes string bending easy as you like. This guitar has a strat body shape which adds to its cool, classic look.

While the acoustic-electric guitar isn’t actually its own body type, it’s simply an acoustic guitar with electric pickups to amplify its signal (we’ll talk about pickups soon!), it’s worth mentioning that you’re almost never going to get a comparable tone to that of a hollow body or really, any kind of electric guitar. It’s just not built for that, and in fact, it’s almost always better if you want that acoustic sound, to buy a really resonant acoustic guitar and add a nice soundhole pickup (like this one) instead.
A 6 stringed guitar, black satin in color. It is gloss finish and comes without a case. The body is made from Mahogany and the neck from the Flamed maple. The guitar consists of tone,volume and 3 way pickup switch. It was introduced alomost 20 years ago and includes all the charm present in its cousins from USA . The device can be acquired with as little as INR 19,755  and more details can be found at:
Distortion is a feature available on many guitar amplifiers that is not typically found on keyboard or bass guitar amplifiers. Tube guitar amplifiers can produce distortion through pre-distortion equalization, preamp tube distortion, post-distortion EQ, power-tube distortion, tube rectifier compression, output transformer distortion, guitar speaker distortion, and guitar speaker and cabinet frequency response. Because many factors beyond preamp distortion contribute to a particular guitarist's sound, recording engineers and PA system techs typically put a microphone in front of the guitar speaker, rather than only use the guitar amp's pre-amp out signal. A sound engineer or music producer may send the DI out signal from the pickups to a separate track at the same time, so they can re-amp the signal later. In contrast, it is fairly common to use a DI box with electric bass.
Electric guitars are solid-bodied guitars that are designed to be plugged into an amplifier. The electric guitar when amplified produces a sound that is metallic with a lengthy decay. The shape of an electric guitar is not determined by the need for a deep resonating body and this had led to the development of contoured and thin bodied electric guitars. The two most popular designs are the Fender Stratocaster and the Gibson Les Paul.
Epiphone Broadway Electric Guitar Make way for the Broadway, Epiphone’s big, bold and blindingly beautiful hollow body archtop guitar. The Epiphone Broadway has been a jazz club staple since the 1930s and it continues its soulful career with new appointments. The big-bodied Broadway features a laminated maple body with a select spruce top, a hard maple neck, a rosewood fretboard and Alnico Classic Humbucker pickups.
A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.
{ "thumbImageID": "Limited-Edition-1966-G-400-PRO-Electric-Guitar-Ebony/H79032000001000", "defaultDisplayName": "Epiphone Limited Edition 1966 G-400 PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51321473136498", "price": "399.00", "regularPrice": "419.00", "msrpPrice": "599.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-1966-G-400-PRO-Electric-Guitar-Cherry-1321473136498.gc", "skuImageId": "Limited-Edition-1966-G-400-PRO-Electric-Guitar-Cherry/H79032000003000", "brandName": "Epiphone", "stickerDisplayText": "Price Drop", "stickerClass": "stickerEmphasis", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-1966-G-400-PRO-Electric-Guitar-Cherry/H79032000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51321473136358", "price": "399.99", "regularPrice": "424.99", "msrpPrice": "599.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-1966-G-400-PRO-Electric-Guitar-Ebony-1321473136358.gc", "skuImageId": "Limited-Edition-1966-G-400-PRO-Electric-Guitar-Ebony/H79032000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-1966-G-400-PRO-Electric-Guitar-Ebony/H79032000001000-00-60x60.jpg", "imgAlt": "" } ] }
Working with Dimebag Darrell Abbot, Rex Brown, Mike Scaccia, Scott Shelby and others, this guitar master has had to work overtime to keep up with these guitarslingers' abuse. These guys make their guitars scream on stage, and it's King's job to make them sing again. "Everbody knows -- other than Scott -- that they're at my mercy when it comes to working on their guitar," he says. "That's why I'm not out on the circuit. I'm pretty picky about which guitar players I work with." (Although Darrel and Mike are no longer with us - may they ignite heaven with their notes - Scott is still tearing it up with Warbeast.) Rabid Flesh Eater, Warbeast, Rigor Mortis, Pantera, this guy has worked on some brutal guitars. "If you're going to buy a Cadillac, put the right parts on it" is one of his mottoes.
While pretty much every noise musician uses the guitar as a weapon of mass destruction, Mark Morgan of scuzz-worshippers Sightings uses his guitar for sheer negation. Playing in 50 shades of gray on found and borrowed pedals, the leader of this longtime Brooklyn noise band is quicker to sound like a vacuum humming, toilet flushing, or scrambled cable porn feed than Eric Clapton or even Thurston Moore; a unique sound that has all the emotion of punk, with none of its recognizable sounds. As he told the blog Thee Outernet: “Probably the biggest influences on my playing style is sheer f—king laziness and to a slightly lesser degree, a certain level of retardation in grasping basic guitar technique.”
If you like the traditional look of a Fender Stratocaster, but want something a bit more modern with a little more output for heavier blues, rock, and metal tones, the ESP LTD SN-200HT is a fantastic value for the money. You’ll get a great range of tones thanks to the humbucker in the bridge position, and two single coils in the middle and neck positions.

Gibson Brands, Inc. is considered as an American producer of guitars and other instruments, which is located in Nashville, Tennessee. The brand was earlier known as Gibson Guitar Corp. The company was founded by Orville Gibson in 1902. They are famous for its innovative and superior quality guitars. They sell their guitars under different brand names. These guitars are available at little higher rates. The price range starts from Rs. 49,500/- onwards (approx). For more details, visit Gibson.com.


SCALE LENGTH What is a "Scale Lenght?" The scale lenght is the lenght the string travels between the nut at the top of the fretboard and the bridge at the mid section of the base of the guitar. To determine the scale length of your guitar you would measure from the front part of the nut where it meets the fretboard to the center of the 12th fret on the neck and multiplying that by 2. Add about 3/16" to that on the low e string and taper that to about 1/16" added to the high e string. This is called compensation and that is why you see that tapered line on a bridge. Go to Stewart MacDonnaldfor more info. They also have a Fret Calculator that helps you determine your particular scale length in addition to a page dedicated to helping you out with tons of free info for your guitar building projects.The fret is the metal of nickle wire that is raised up off the fretboard. I would suggest buying a neck that has been pre made from a manufacturer that fits the design concept that you want to go with. I bought mine from Guitar Parts USA for about $70. You can pay anywhere from $50 to $300 for a neck at online retailers, but surf around and make sure you are satisfied with what you get. Guitarpartsusa will tell you to buy an expensive neck if you are building an expensive guitar, not a $70 neck. But for mine the $70 neck works just fine. Once you get the neck in and you determine what the scale length is you can lay it all out on paper. I recomend buying all your hardware, pickups and knobs before you draw your final template. This will allow to place everything where you want it and know what size holes to drill for the electronics and how big the cavites will need to be for them and the pickups.
Bridge pins prior to 1945 did not have string slots. There is a slight seam seen in the round head (hard to see but it's there). The bridge pin round head diameter from 1931 until mid-1939 was about 0.320". In mid-1939 the round head was reduced to about 0.300", and this size was used until the unslotted pins ended in 1945. The shaft size was slightly increased at this time too. The pre-1939 style pins have a more bulbous head, where the 1939-1945 style's head is more slender. The pin taper is about 5 degrees, and the diameter under the collar is about 0.225". The pins are made of hard celluloid. Several companies have reissued these old style pins.
To capture two speakers in a multi-speaker cab or record a bigger sound that delivers the response of two different microphones in similar positions on one speaker, you can try using two mics in a close or semi-close placement. If you’re using two different mics on a single speaker, place the capsules of each as close together as possible, without touching, in order to minimize phase cancellation. This technique might seem redundant, but can often yield outstanding results, allowing you to blend the characteristics of two different microphones to capture one amp sound – a bright, detailed condenser and a punchy, midrange-heavy dynamic, for example. On guitar cabs carrying two or more speakers, try miking each speaker separately, placing each of two mics – same type or different – at the same distance. Some amp makers use different types of speakers in cabs to enhance sonic complexity, and this miking technique will make the most of those. Even two speakers of exactly the same type, however, will often sound slightly different, and blending them might yield great results.
Paul Kossoff, of Free and Back Street Crawler, favoured a 1959 Les Paul Standard. In 2011-12, Gibson’s Custom Shop made a reproduction of Kossoff’s Standard, featuring a so-called “green-lemon” flametop, two-piece carved maple top, mahogany body and neck, Custom Bucker humbucking pickups and kidney-bean shaped Grover tuners similar to those Kossoff had installed on the instrument. 100 Kossoff models were made to resemble the guitar at the time of Kossoff’s death in 1976, with another 250 in a VOS finish.
Wholesale Guitar SymbolsWholesale Mahogany GuitarsWholesale Hollow Guitar EsWholesale Guitar Finger PicksWholesale Snakes GuitarWholesale Golden GuitarsWholesale Sunburst Hollow GuitarWholesale Custom Double GuitarWholesale Custom Shop Guitar 1959 Tiger FlameWholesale Ems Shipping GuitarWholesale Children's GuitarWholesale Fret GuitarWholesale Guitars LowWholesale Wood For GuitarsWholesale Red Active Guitar

There are any number of different variations which can give a guitarist his or her tone. The combinations and possibilities are mind-blowing. You can take your pick from the type of guitar used, the hardware and technology used in the guitar, the amplifier you’re plugged into, the room in which you’re playing, the level of technique within your fingers. The list goes on. Typically any one of these factors could make the exact same rig sound completely different in the hands of another player. Yet technical mastery and high-end or vintage equipment are usually a by-product of having played the instrument for A Very Long Time. What about when you’re at the start of your playing career, and you’re looking for a quick shot in the tonal arm? Or you’re more accomplished and looking to experiment with different sounds and textures. It’s here that guitar effect pedals start becoming more and more attractive. But what are they?
Guitars vary by type. Some are designed for beginners, while others are customized for professional guitar players. Most of the major guitar brands are available in a variety of different styles, each designed to best suit a customers' specific playing needs. Ease and sound are certainly big factors to consider when choosing a new guitar. In general, heavy wood makes the tone rich and full--the weight and quality of the wood makes a big difference when choosing which guitar you should purchase. The type of music that you will be playing will also have an impact. While Fenders may be the best for rock and metal, an Ibanez may be more well suited for blues and jazz.

no. first of all a bass guitar has 4 strings and a guitar has 6 strings second, u couldn't tune the guitar open notes a whole octave down to create the bass notes as the strings would be too loose. although you can play bass songs on a guitar but it wouldn't be as deep a bass. Actually you can. depending on the kind of way your guitar is built you can remove your guitar strings and replace them with bass strings and finally adjust the setting on your amp so you can have a rich full tone. I have a Fender Squier and made it into a bass by replacing the strings and adjusting the settings on my amp. WARNING: you NEED to know if your bridge or the place where you put the bass strings through can hold the pressure the bass string apply.
In 2007, Gibson announced the idea to create a computerized Les Paul, dubbed the “Robot Guitar” which was released on December 7, 2007. The guitar has a computer integrated into the body with a “master control” knob next to the volume knobs, which can be pulled out, turned, or pressed to issue different commands to the guitar. One of the more notable features is the ability to tune the guitar to standard tuning simply by pulling out on the master control knob and strumming the guitar, while the tuning pegs adjust themselves to standard tuning. Another use of the master control knob is to be able to tune the guitar to alternative tunings, such as drop D, by pressing on the control knob to fit the setting. The new Les Paul has a new custom silverburst blue finish.[30] While the product was advertised in the American popular press as a “world’s first”, similar systems, some external, have been in use for decades.

Now you see why these Spectrum 5s are so desirable! It is not clear, by the way, how many (if any) were ever made with ebony necks. The few I’ve personally seen had maple necks. Certainly the expense of the ebony would have been enormous and hard to justify on the Teisco brand name. Also, with the density of ebony, the guitars probably would have been hard to balance. In any case, these are the Holy Grails of Teisco!
Does anyone have one of either of these that they can comment on? I dig the looks of the silverburst (though I also dig the cream/ivory colored ones), and kinda want to have an SG in my posession (thanks to Zappa!). I have read all the positive reviews of Agiles on here, but few mention the Valkyrie...I'm a little worried that it is in the lower end of their price range, so I'm wondering how the hardware/electronics/fit and finish are....I'm aware it's not going to be crazy high end, but I'd like it to be useable (even though I may swap out some parts). Any opinions? Also, what parts would you recommend swapping out? Would an Epiphone be a better deal in terms of fit and finish and stock parts?

* P A W N S H O P * G U I T A R S * Serving The World With Quality Vintage and Used Gear!- Up for sale is a 1960'S Norma Guitar Japanese Vintage Project As Is!- Good Japanese project- missing nut, bridge, knobs, electronics need work, but pickup is ok- very noisy- lots of body checking and neck needs work- truss barely turns- missing tuner ferrules- head stock logo is loose- even if I forgot something this item is sold as is with no returns!- this is definitely a worthy project- from the MIJ Hay... more
Here we have a well preserved vintage Hohner HW600n HW for Hohner Western Acoustic Dreadnought Martin D35 Style acoustic guitar. with a gorgeously grained THREE Piece Mahogany back and sides WoW its really a beauty. Workmanship Fit and finish quality is excellent this guitar is stunning, previously set up and is Great sounding in near mint like condition its from the late 80’s early 90’s D35 Look alike, Spruce top with Mahogany Neck and some of the absolutely highest grade Mahogany your going to see its flamed and figured and has fire and looks as if it could be Koa but listed as Mahogany at any rate this is one of the nicest models Hohner in this era truly a stunner,,, its in top structural shape as well its neck angle is excellent at 1-11/16ths at the nut its medium profile neck is very easily played and is a convertible c shape… We were impressed with her sound to with nice volume and a mature sounding tone. We think you’ll like this beautiful Vintage Hohner as well we believe this to be late 1980’s to early 90’s made in Korea and would fool any made in Japan fan for its fit and finish workmanship this is a good vintage guitar in its own right… no cracks no repairs no issues no excuses someone is going to have a smile on their face. any questions or to buy this guitar contact Joe at: JVGuitars@gmail.com .
Before deciding on how to go about mic’ing the amp, listen to the sound in the room. If the guitar is being recorded as part of a rhythm track in the same room as drums and other instruments, the only option may be to use a close-mic’ing technique, unless you don’t mind dealing with the other instruments bleeding into the guitar track. Recording guitars in isolation, as an overdub, presents more options for ambient room mic’ing. Experiment with mic positioning to achieve the right amount of room sound and the desired bass and treble response. Distance-mic’ing in a very live-sounding room can create an appealing slapback echo-type sound, while close mic’ing gives you absolute flexibility in the mix.   
It can be tough to know where to start when you’re looking at as many options as there are in the world of effects pedals. In fact, your first pedal may not even be a pedal at all – many amplifiers have built-in effects sections so you can get your introduction without having to attach an external stompbox. But if you have a more straightforward amp, or if you’re ready to try effects units that go beyond its built-in capabilities, there are some great varieties for novice users. And don’t forget that you can always look up the preferred pedals of your favorite guitar hero to inspire your own collection.

After the introduction of the Fender Stratocaster Ultra series in 1989, ebony was officially selected as a fretboard material on some models (although several Elite Series Stratocasters manufactured in 1983/84 such as the Gold and Walnut were available with a stained ebony fretboard). In December 1965 the Stratocaster was given a broader headstock with altered decals to match the size of the Jazzmaster and Fender Jaguar.


You can run up to six of the 112 built-in internal effects within the Boss MS-3 Multi Effects Switcher at the same time and integrate three of your existing stompboxes into that sound too. So, to say there’s a world of options at your feet is an understatement. You can use it with your hybrid MIDI gear and utilise it to channel switch between amps too.
IK Multimedia are good friends of ours and we’ve watched them grow from a small plugin company to a world-beating manufacturer of amazing widgets for getting sound in and out of your iPhone or iPad. Amplitube Custom Shop is the software you need to buy their premium plugins. However, it comes with a load of amazing stuff out-of-the-box, including 9 stomp box emulations, 4 amps, 5 cabs and more.
And again. the no-brainer: your guitar just plain sucks.  If your bought your guitar at Wall-Mart for $19.99, PLEASE don't put my pickups in it!!!  Here is EXACTLY what you should do with it: keep it around until you are playing your first big club gig and you need to do something extraordinary to get the crowds attention.  As you thrash away on the final chord of the last song pick up THIS guitar, douse it heavily with lighter-fluid and light that puppy up!  Now that's getting more that 20-bucks worth of wow-factor out of that pile of Chinese dog-dung!

Not something you have to think about with an acoustic guitar, the electrics in an electro acoustic are quite important, though not as critical as with an electric guitar. You’ll want to make sure that you’re getting a good quality pickup and preamp, and then the next thing to consider will be features. Preamps often come with EQ adjustment to alter the tone slightly, and some will even come with certain effects that you can add on. Builtin tuners are a common addition too which mean you don’t need a separate tuning box.
Introduced around the same time as the White Falcon, the Duo-Jet (6128) became another hit for Gretsch, especially after a young George Harrison played one with The Beatles in the early sixties. While finding an original Gretsch is very expensive, the brand still makes faithful reproductions of most of its historic models and are popular with guitarists with a penchant for vintage.
Hardly any mention of female players, why is that? I’m a bloke, not a chick, yet this is like the UK 2011 sports personality of the year awards based on press coverage – not performance or results but drunk journo’s who only like watching blokes – but not Pat Metheny LOL – SO… No Jennifer Batten then? Rightly tho’ someone thought slide player Bonnie Raitt should get a mention – Derek Trucks got a look in (what a slide player) – had to look hard to find Larry Carlton – and Lee Ritenour – and John Scofield! Yet no Nile Rogers? And Keith Richards should be up there but why not Ronnie Woods? Nice to see Tom Scholtz remembered yet no Steve Miller who learned at the feet of Les Paul and yet no Les Paul either? Such a narrow list limited by populism not necessarily ability, tone or compositon. Not really much of list was it?
Taylor T5. Even the friend who bought it doesn't play it and it goes for around $2300. I was always looking for an acoustic that plays like an electric, so the T5 seemed optimal. It didn't play very well and I thought it sounded awful. Since it's got the Taylor bridge pickup in it, it sounds like a tinny can with a string until you EQ the fuck out of it. But for that kind of money, it should play and sound awesome (in my opinion), or come with indoor plumbing.
An Octaver is a cool little effect that will tune your original sound several octaves up or down in pitch. This effect can give you the ability to fill up the bass frequencies with your guitar. You can often see Jack White using this effect when he plays live with only one other drummer. He will turn on his octaver at certain points of the song to play bass lines.

As a conservative approach to using steel string, one thing is pretty much for sure; if a Martin came from the factory with a Belly bridge, it is braced for steel strings. If it has a rectangle bridge (and was made before 1929), the bracing needs to be checked by a qualified repair person to determine if the guitar's bracing can handle steel strings. My personal opinion is if it's a style 18 or higher and has a rectangle bridge and was made before 1930, it's not really made for steel strings. Though 1927 is generally thought of as the year when most models were braced for steel strings, 1927-1929 models could be braced for either steel or gut strings. So before putting on steel strings on a 1927-1929 Martin, have it check out by a good repair person. They will check the top's firmness, bracing dimensions, and bridge plate thickness.


The world is full of amps. It is so full of them in fact that it is somehow hard to choose not because there is not enough good ones, but too many of them. Which is very unfortunate, as it raises the entry level requirement for understanding what you are buying. This means that a whole lot of people get intimidated when trying to pick an amp. Like if they want a mini amp that they would want to carry with them when they go somewhere. Which is why I sat myself down the other day, bargaining all the while, and compiled a list of the best small guitar amps, for the sake of all the big musicians trying to play them. Hopefully at least some of you will find it more or less useful, since I had to categorize these according to price, sound quality, tone quality, comfort of use and even the general usefulness. What I am trying to say is, it was a lot of work.

Rock On Good People (it’s actually rockongoodpeople) is another YouTube channel really designed to funnel viewers towards the creator’s website, www.nextlevelguitar.com which—no surprise—has heaps of stuff you can buy. But that doesn’t mean that Rock On Good People doesn’t provide a long list of free videos ranging from lessons for beginners through to how-to-play-techniques aimed at experienced players. What I like about Rock On Good People is the cool vibe you get from all the presenters, no matter the style or subject of the lesson, and some of the videos take you further down the guitar-playing track with themes like “Tips For Improving Your Live Shows”. That might seem a long way off, when you’re currently trying to get your head around playing basic barre chords, but these videos have hints and advice that are good seeds to plant in your mind early, even if you’re still some years off jumping off your first Marshall stack and into the mosh pit.


Need Help?Customer Service1-800-458-4076customerservice@americanmusical.comMon - Fri 8am - 11pm Eastern TimeSat 9am - 8pm Eastern TimeSun 10am - 8pm Eastern TimeProduct Assistance1-800-458-4076tech@americanmusical.comMon - Fri 8am - 11pm Eastern TimeSat 9am - 8pm Eastern TimeCredit Department1-877-276-3711creditdept@americanmusical.comMon - Fri 8am - 8pm Eastern TimeSat 9am - 1pm Eastern TimePayments1-877-281-8332acctserv@americanmusical.comMon - Fri 8am - 8pm Eastern TimeSat 9am - 1pm Eastern Time
{"pageName":"[gc] vintage: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
Developed by Martin in 1916, the dreadnought shape changed the landscape of acoustic guitars. Thanks to its punchy sound, loud volume and improved bottom end, dreadnoughts quickly rose to popularity and has since been copied by virtually every acoustic guitar manufacturer. Today, if you're thinking acoustic guitar, the most probable image in your mind would be of a Martin Dreadnought or one of its many clones.
Fuzz – A dynamic distortion effect that sounds just like the name. Fuzz was originally created by putting a pinhole or cut in the speaker of an amplifier. Original fuzz pedals use a transistor-based circuit to create the sound. Compared to distortion, fuzz is more raw, abrasive and doesn’t compress the tone. These pedals typically perform best at the front of your effects chain into a clean amplifier.
First of all we have to make special mention for the build quality of the RP500. It has a cast-metal chassis and vacuum-style footswitches like on an actual stompbox, and it just feels like it’s built better than any Line 6 or Boss multi-effect we’ve tried. On the rear of the RP500 you’ll find a ¼” input for your guitar, stereo output, headphones jack, AUX in, balanced XLR stereo out, and a USB port. A power supply is included, so points for DigiTech over Boss for doing users that courtesy. A look at the front panel layout reveals it’s pretty unique. It doesn’t have the side-by-side stompbox look we love so much in the Zoom G3X, it has fewer knobs than the Boss ME-80, and yet it looks more straightforward to use than the Line 6 POD HD500X. The dimensions and weight are almost exactly the same as the Boss ME-80 (about 20 inches wide, and weighs approximately 8 lbs).
The 700-series guitars had all controls and pickups mounted on a faux-tortise shell pickguard. That makes it very easy to do any required work on the electronics. By contrast, On the 800-series, with a couple of exceptions, the tone and volume control pots and the jack socket are mounted to the body, a three-way pickup switch, and a lead/rhythm slide switch are mounted to the pickguard; and the pickups are mounted to individual little mounting plates made of the faux-tortise shell material.
This. There's genuinely nothing good about it. It makes a Squier Starter Pack and a Daisy Rock look like a PRS Private Stock. Pretty sure the description isn't even true. An old roommate of mine had one and it was the worst guitar I have ever played in my life and I'm not just saying that. Very seldom do I say that a guitar is just plain terrible. Even with other guitar brands that I hate (like Squier) I'll say, "well, everyone has their own preference," but this guitar is just inexcusable. http://www.indianaguitar.com/products/Scout-acoustic-electric-967.html#.VZNeJ1L3bCQ
I don’t recall how I got his number, but when I called Dana Sutcliffe to talk about what is probably his most famous—at least known famous—guitar, he said we should do lunch. Dana lives just down the road from me in Delaware, so it was an easy meeting. I asked if he’d ever had Vietnamese pho (beef noodle soup, one of the world’s most perfect foods), and since he hadn’t and since he loves to eat, we met one day in one of South Philadelphia’s numerous pho parlors to discuss the genesis of the Alvarez Dana Scoop. It was, as it turns out, all the result of an accident.

Speaking of Cambridge in the late sixties, of course Dave Gilmour was another who came out of that scene, but he and Nick were far from alone. For example, there was (and is) Fred Frith. I’ve never warmed to his music but it’s certainly different and he and his group have changed people’s ideas of what music is. You deserve it to yourself to check him out before you dismiss him. Then there’s Derek Bailey, who ploughs a parallel furrow, but for sure knows how to play a guitar. Personally, in that vein, I find Billy Jenkins much more fun – fans of Tom Morelli’s style should be checking all these guys out.
My first guitar, bought out of an advert in Kerrang over 20 years ago. I think it was branded "Axe" and it had absolutely nothing good about it. Some sort of MDF body, horribly bowed neck (couldn't be adjusted as the truss rod was broken), high frets everywhere (you could pull them out with your fingernails, fortunately), slipping tuners, hopeless bridge, hopeless nut, everything. Nearly put me off playing before I'd got started.
A basic triode valve (tube) contains a cathode, a plate and a grid. When a positive voltage is applied to the plate, a current of negatively charged electrons flows to it from the heated cathode through the grid. This increases the voltage of the audio signal, amplifying its volume. The grid regulates the extent to which plate voltage is increased. A small negative voltage applied to the grid causes a large decrease in plate voltage.[42]

The two mini Les Pauls are also illustrated in ’60s Bizarre Guitars. These were the J-1 and TG-54, slab-bodied solidbody electrics with bolt-on necks. Both had typical Teisco three-and-three headstocks, with a point or hump in the center not unlike Kay guitars, but slightly more rounded. They had rosewood ‘boards with large white dots, except for two small dots at the octave.
An Auto-Wah is a Wah-wah pedal without a rocker pedal, controlled instead by the dynamic envelope of the signal. An auto-wah, also called more technically an envelope filter, uses the level of the guitar signal to control the wah filter position, so that as a note is played, it automatically starts with the sound of a wah-wah pedal pulled back, and then quickly changes to the sound of a wah-wah pedal pushed forward, or the reverse movement depending on the settings. Controls include wah-wah pedal direction and input level sensitivity. This is an EQ-related effect and can be placed before preamp distortion or before power-tube distortion with natural sounding results. Auto-Wah pedals include:
Conversely, buyers can use these websites to find out what the real value of a guitar is. This can be useful whether you're buying from a private seller or the guitar store down the street. Don't be afraid to haggle if the seller wants more than the guitar is actually worth according to book value. While the seller may eventually find another buyer, there's no reason for you to over pay.

By moving up or down one level, in terms of magnetic strength, you can usually add or subtract a little edge from a pickup. If your guitar is too tangy, moving down one pickup level (e.g., from alnico 4 to alnico 2) may smooth it out. If you want to add bite, go with a slightly stronger magnet—like, alnico 5 to a ceramic magnet. The good part is that magnets are both easy to find and inexpensive in comparison to buying a whole new pickup.

On regular occasion I have stuff come through to me after the instrument owner has already taken it to another shop that, for whatever reason, could not fix or solve the problem. This time, a supposedly professional and legitimate shop... and after the customer PAID FOR WORK THAT DID NOT YEILD THE DESIRED RESULTS. That just boggles my mind a bit. I would never charge a customer unless they are happy and satisfied with my work.

Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: 3-Color Sunburst
If you’re into guitar and its majestic world, we strongly advise you to get your hands among the best options. That way, the musical enigma will reach its pinnacle. We here would help you around with the list of best and famous guitar brands available in the nation at present. To be fair, even the best guitarist in India uses these ones for their musical rendering.
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
Hello everyone. Today we’re going to do a setup on a Les-Paul-style guitar. For this post, I’ll be setting up a “Burny Super Grade” guitar, but the set up is the same for most Les-Paul-style guitars. I already have a general electric guitar setup post over here: http://diystrat.blogspot.com/2011/03/how-to-set-up-electric-guitar.html, but there are a few Les Paul specific areas I’d like to go into here.
The herringbone purfling (binding) was discontinued on style 28 guitars in 1947. The binding was made in pre-World War II Germany and was not replaceable from American sources. When the stockpile ran out in early 1947, D-28s (and all style 28 guitars) were bound with a new decoration scheme of alternating black and white celluloid (originally used on the Martin archtop C-2 model). Hence the term "herribone D-28" or "bone 28" is heard amoung Martin collections, signifying a pre-1947 style 28 Martin guitar.
This is another best budget electric guitar from Epiphone. It is also a great choice for a beginner and it is quite lightweight to carry. For an inexpensive guitar, this one has a pretty good sound and tone. Despite being low priced, the manufacturer has not compromised in its quality. The cherry red color is really attractive and appealing and can help you to boost up your smart personality as a guitarist. This is closer in look to the iconic rock guitars.
Musicians might not want to be replaced by machines - we (or they, as it were, because I lost whatever musician credentials I might have earned annoying people with my wooden flute as a beggar on the streets of a tourist town when I started programming computers to play music) might make a strong case that no machine can express the human soulfulness of music. It is easy to conclude that, the more of the musical task that is assigned to a machine, the less soul is expressed in the music. Well, great big rock-n-roll wall of sound that all over your acoustic guitar soul. That stack of Fender amps I can hear five miles from the stadium where David Gilmore is strumming a guitar is as much an instrument as was the Shepard's lute - and a much more popular instrument now, for audiences attuned to the daily roar of tires crushing air against pavement.

FWIW: I have the same guitar, and it is around the same vintage as yours, with a 4 digit serial number and the headstock truss-rod adjustment. As you can see from the response from SLM, the headstock truss-rod adjustment was on the earliest Alvarez guitars. I have another Alvarez from 1981-2, that adjusts in the sound-hole. You'll see a lot of people claiming that they have, or are selling, 70's vintage Alvarez guitars, but have sound-hole truss-rod setup. To me, that's the first indicator that a guitar might be post 1980'ish. And actually, due to the neck attachment issues, I gravitate towards the 80's vintage, as they have had less time to have their neck angle change from string tension.


Adolph Rickenbacher was born in Switzerland in 1886 and emigrated to the United States with relatives after the death of his parents. Sometime after moving to Los Angeles in 1918, he changed his surname to “Rickenbacker”. This was done probably in order to avoid German connotations in light of the recently concluded First World War as well as to capitalize on Adolph’s distant relation to World War I flying ace Eddie Rickenbacker. In 1925, Adolph Rickenbacker and two partners formed the Rickenbacker Manufacturing Company and incorporated it in 1927. By the time he met George Beauchamp and began manufacturing metal bodies for the “Nationals” being produced by the National String Instruments Corporation, Rickenbacker was a highly skilled production engineer and machinist. Adolph soon became a shareholder in National and, with the assistance of his Rickenbacker Manufacturing Company, National was able to boost production to as many as fifty guitars a day.[4]

Straight away meeting the essential criteria and tonal platform for a good small solid state combo amp for practicing at low volumes with a pocket friendly price tag is Orange Crush 20RT. This dual channel 20 watt guitar amplifier that also comes in a 35 watt version is the upgraded model of the well received Orange Crush 20 for having a built-in spring reverb effect and a chromatic tuner which are the kind of features great for daily use.

For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound. 

This bass guitar amplifier features a 20-watt amplifier and an 8-inch driver. It reproduces frequencies from 70 Hz ~ 10 KHz with a total harmonic distortion of 0.5% (typical). It also has a built-in, switchable active compressor. It features a 3-band EQ, with the bass EQ centered at 100 Hz, mid-range EQ at 800 Hz, and a treble EQ at 6 KHz. It features a 3.5mm line output with an impedance of 1 kilohm, for directing the output signal to a mixer, recorder, or another amp. The 3.5mm stereo headphone output will defeat the internal speaker for quiet practicing.
Flat tops from 1945 to 1969 are considered good quality and have good sound, although they are not as collectible as the 1920's to 1944 steel string models. This is largely due to the change in bracing and materials Martin started using in 1945. Rosewood models of Brazilian rosewood are most collectible from this era. This is because Brazilian rosewood was basically unavailable since 1970 due to export problems. Because of this, these models are considered more collectible.

Eddie's Guitars represents the finest in boutique amplification. We have the largest selection of quality amplifiers available today. We focus on keeping up with the industry's most current builders. Stocking guitar amp brands like Fender, Marshall, Mesa Boogie, and Orange, providing completely original designs or modern reproductions of your favorite classic amps, we truly have something for everybody.
Woods typically used in solid-body electric guitars include alder (brighter, but well rounded), swamp ash (similar to alder, but with more pronounced highs and lows), mahogany (dark, bassy, warm), poplar (similar to alder), and basswood (very neutral).[19] Maple, a very bright tonewood,[19] is also a popular body wood, but is very heavy. For this reason it is often placed as a "cap" on a guitar made primarily of another wood. Cheaper guitars are often made of cheaper woods, such as plywood, pine or agathis—not true hardwoods—which can affect durability and tone. Though most guitars are made of wood, any material may be used. Materials such as plastic, metal, and even cardboard have been used in some instruments.
×