View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.

Playability and tone are two of its most commended traits. Many describe its neck as very easy on the hands, while others describe the overall playing experience to be better than their other acoustic guitars. The TK-40D preamp gets a lot of nod from users who want to fine tune their amplified sound, while there are also many who are satisfied with its acoustic sound.
Confusion sometimes revolves around the distinctions between overdrives, distortions and fuzzes, but in theory each should do approximately what it says on the box—even if some also do a little of the other breeds’ jobs along the way. In the case of overdrive pedals, the intention is often twofold: either to provide a gain boost to “overdrive” a tube amp into distortion, or to approximate the mildly distorted sound of a slightly overdriven tube amp. In practice, most do a little of both. Crank the average overdrive toward the max and it usually coughs up an element of self-generated distortion, which can easily be heard when DI’d into a mixing desk set to well below overload levels; generate enough distortion, and things can also sound a little fuzzy. Despite the gray areas, however, there are definitely distinctions between the types. It all makes some sense if you think in terms of the degree of clipping achieved by the pedal, with overdrives generally being soft-clipping devices and distortions being hard-clipping devices.
Russell, George (2001) [1953]. "Chapter 1 The Lydian scale: The seminal source of the principal of tonal gravity". George Russell's Lydian chromatic concept of tonal organization. Volume One: The art and science of tonal gravity (Fourth (Second printing, corrected, 2008) ed.). Brookline, Massachusetts: Concept Publishing Company. pp. 1–9. ISBN 0-9703739-0-2.
Other early phase shifters used field effect transistors (FETs) to control each phasing stage in place of the light bulbs in the ’Vibe, and certainly later units employed opamps with variable resistors (six TL072 dual opamps or similar in the MXR Phase 100, for example). Electro-Harmonix’s sweet little Small Stone, on the other hand, has a more unusual design that employs five CA3094 type Operational Transconductance Amplifiers (OTAs). The results are similar, but subtly different. Many phasers—such as MXR’s Phase 45 and Phase 90, and E-H’s Small Stone—carry nothing but a speed control, plus a “Color” switch in the case of the latter. Others have Depth, Mix and Resonance controls. The latter appears on many units with internal feedback loops (the Small Stone and most phasers before it lack this circuitry), and allows the player tweak the degree to which the portion of the signal fed back enhances the frequency peaks.

Traditionally, the vast majority of professional engineers prefer to record electric guitars through a mic’d up amplifier, rather than use a DI (direct injection) box, even though specialist guitar DI units are readily available. That said, there are many pracitcal reasons to split the signal from the guitar and use a DI box in conjunction with an amp. If you find out later that the recorded amp sound doesn’t work in the mix, or you wish you hadn’t committed a particular effect ‘to tape’, the pure guitar sound can be re-amped and subsequently reprocessed without the need to discard a great take. You can route the DI’d signal through a modelling plug-in and blend that with the mic’d amp sound, too.

You have all the control you need over your effects and you can use all three at the same time, too – ideal for those who like to create big walls of sound. The delay features a tap tempo control, whilst the FX loop connectivity allows you to hook up any other effects pedals you might have before the delay, which ensures the tonal qualities of those pedals are intact.
The EM-18 came with either a pair of Mighty Mite humbuckers or a pair of DiMarzios. It was otherwise the same as the E-18 with the addition of a three-way mini-toggle coil selector switch which allowed a choice of both or either coil on the lead pickup. This arrangement allowed for a rather remarkable variety of tones, by the way. EM-18 production began in 1979 and some 1,375 were made until the guitar ended in February 1982.
Processors, on the other hand, comprise an entirely different water heating appliance filled with piscean vertebrates, as they tend not to need any of the dry sound, other than in a few specialist applications. As a rule, processors such as EQ and compression are connected only via track, bus or master insert points — at least until you have the necessary experience to understand why you might want to break the rules once in a while. Having got that off my chest, let's look at some specific effects (we'll look more closely at processors another time).
Your guitar is a model H1213 Archtone made in 1963. Harmony did a great job of stamping model numbers and dates of manufacture on their guitars, but they often require some decoding. The F-63-HB is the date code and the two numbers, not surprisingly, indicate 1963. The “F” preceding the year was often thought to be a fall production indicator while the other letter stamp they would use was an “S,” which researchers thought stood for a spring production instrument. However, a former Harmony employee notified a Harmony database website that it is more likely an “F” stands for “first” and “S” stands for “second.” He explained that Harmony would shut the factory down for two weeks in July and that guitars produced before this break were stamped “F,” while guitars produced after were stamped “S.” The H1213 is the model number as indicated in Harmony’s catalogs and literature. The “3714” is the serial number of your guitar, but little information has been uncovered as to what this series of numbers represents. More than likely, it was a consecutive production number of that particular model for either the first or second half of the year.

View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.
The Venue DI is essentially an amplifier without a speaker cab. If you go straight into a mixer or PA system this unit lets you customize your acoustic's tone in every way imaginable. While it's particularly ideal for someone who doesn't have an existing preamp in their acoustic rig, it outperforms most preamps that come standard in an acoustic guitar or even in an acoustic amp.
“Well, the legends didn’t use pedals.” Whenever somebody says something like this, and you ask them to whom they are referring, they’re often misinformed and factually wrong. “Jimmy Page”. Uh, ever see him use a Tone Bender Mk II? “Jimi Hendrix.” Please feel free to complete a Harry Potter novel while I finish laughing. “Stevie Ray Vaughan.” Ibanez and Maxon should retire a green Tube Screamer colored banner with his name hanging from their company rafters. This list goes on and on. Yes, there are lots of cool dudes back in the old times who didn’t use pedals to help them create some classic tones, but once they had the chance, they chose to.
This is a good list although after owning most of these brands or at least having played all of them, I would re-rearrange the order. Gibsons although a good guitar are simply no longer the quality of Taylor or Martin. They are lagging behind these guys. Yamaha and Epiphone despite online "reviews" are also not near a Taylor or Martin for that matter. So I would drop Gibson, Yamaha, and Epiphone down the list, and although Seagull makes a decent guitar, they are no better than Blueridge, so I would drop them down and bring Blueridge up. Of course this is all subjective, but here is my list re-ordered for what its worth.

The explanation for this "asymmetrical" tuning (in the sense that the maj 3rd is not between the two middle strings as say in the tuning of the viola da gamba) is probably that the guitar originated as a 4-string instrument (actually an instrument with 4 double courses of strings, see above) with a maj 3rd between the 2nd and 3rd strings and that it only became a 6-string instrument by gradual addition of a 5th string and then a 6th string tuned a 4th apart:
For some performances - those well controlled performances of an orchestral guitarist, let's say - machine notation can get a lot closer to producing a true sound than it will to the variations offered by a virtuoso jazz guitarist, blues master or metal thrasher jamming outside the box. In some cases, the machine sound might already fool some of the most discerning listeners -- if the performance does not test the limits of the mechanical emulation.
If you mean the Guitar Hero III guitar then there are two switches on the back. The one just below the neck of the guitar (It looks like a quarter of a circle.) detaches the neck so you can store the guitar AND the neck in a smaller space, and the switch towards the side of the guitar detaches the faceplate so you can put a different faceplate on, or play without a faceplate.
The use of two or more mics is likely to result in other phase issues when these mics are combined in the mix, since they will almost certainly be capturing sound waves that reach the mic capsules at slightly different times. Whether such issues are bad enough to cause a problem (or even be heard) depends on the situation. First, if your two mics sound odd and hollow and/or lacking in low-end from the outset, flip the phase of one (usually via a switch on the preamp or afterward in your DAW) to ensure you aren’t trying to blend two mics that are reverse-phase in the first place. If your two-mic sound goes from hollow and thin sounding to fat and full, you had a reverse-phase issue. If it doesn’t improve – or gets worse – you need to consider other remedies. Once you know that both mics are at least in phase with each other, you can improve their phase relationship even further by moving the position of one around until any other sonic oddities are less obtrusive, which is simply determined by finding a pair of positions that are really smoking tone-wise.
In his informative, yet relaxed style, Sean takes us on a complete guitar recording journey starting at the vibrating strings and ending at the DAW. You'll first learn how to tune and prepare a guitar for recording. Next you're off to investigate the world of the electric guitar. You'll see microphones and mic placement techniques followed by a deep look at amplifiers and what to do when you're working with combos and stacks.
We are very proud to present to you a pleasant surprise I must say from way back when folks this is prime Time beginning of that Golden Era of some of the GREATEST QUALITY Acoustic guitar that FENDER ever had the smarts to Import… that’s right these are Japanese crafted beauty’s . Built back in the day when Japan had the economy riding high while US guitar builders were getting bought out by business folks not guitar builders and US economy was in the tanker just a little brief history reminder… Fender & Gibson were under the gun to cut costs and re-structure if they wanted to stay alive and that they did…. CBS , Norlin…. And others cut back on the high quality woods they once enjoyed and relied upon the reputation the US had for making great guitars basically reputation from the late 50’s – early 60’s To about 68-69 or so…. Then quality went down no doubt…. Right then it was prime time for Japan Luthiers to strike and they did…they stepped up the quality from the funny toy grade guitars we saw here in the states back when I was a kid you could get a decent cute player electric guitar at the Pawn shop in about 1965 for about $69.00 in fact my dad bought my 1st electric guitar there for $69.00 … I loved it—it was a “ KENT” and it sounded very good threw my Silvertone amp….. ..Kent is a offspring of Greco which is a factory behind making many brands buildby Fujigen Gekki…. Ok what this Fender beauty traces back to the great FujiGen Gakki in 1974 according to its serial number… making this beautifully preserved SOLID TOP Vintage Japanese guitars 40 years old a true vintage guitar in its own right. It was during the time when this guitar was built that the Japanese Luthiers set out to make some of the most righteous guitars period… fit – finish - workmanship & materials used are the good stuff folks….. This full size Dreadnought Acoustic guitar is a replica of the Martin designed D-28 known to be one of the finest most prolific designs the US Martin & co ever produced. This Fender F310 is of a High Quality example, The top is Solid Spruce straight grained with some nice figure and wow it has 40 years of patina to its color and finish and overall vintage appeal is Very strong… I was drawn to this example it sounds deep and rich and complex with an excellent volume And its highs ring threw when cording and finger picking , This guitars Back & sides are true to the masterful D-28 desigh …. High quality ROSEWOOD just beautifully grained see the pics for more detail Its absolutely beautiful back – sides are all east Indian Rosewood the fingerboard may be Brazilian Rosewood by its looksa very high grade non theless, the bridge appears to be Ebony wood….. the Bridge is nice and flat to its top which is also nice and straight, action is very good medium low and adjustable. The top has a couple of minor doinks see the pics not bad at all and certainly nothing remotely enough to detour from its vintage Gorgeous looks , no cracks anywhere found , bindings are very food, overall this guitar is an EXTREMLY CLEAN example aside from the afore mentioned . This guitar is in top Vintage used condition and is easily a 9//10 Fit and finish I suggest this was built but a high level Journeyman and can compete or compare with A nice vintage Yairi or Morris or Gibson or Martin for that matter…. .
He's not talking about that kind of 'setup', it's not a type of guitar, it's an essential basic maintenance you perform on any guitar. The setup that he's talking about involves properly adjusting the neck relief (the bow of the neck), the string/saddle action (height above the fretboard), and the intonation (altering the length of the string by moving the saddles on the bridge closer or further from the nut so that the strings are in the most consistent tune up and down the neck).
Up next comes another compact model and our second Yamaha recommendation. This time around, we are looking at their Yamaha FSX830C model. Unlike all of the guitars we have mentioned so far, this one isn't a dreadnought. Instead, we are looking at a standard concert shape with a cutaway. Now, you do have the choice of eleven finishes and body types, and since the options are nearly endless we've narrowed down to our favorite configuration, but definitely look at the others, there's some neat options in there.
Blueridge makes some excellent acoustic guitars, many of them based on historic designs. So, what does that mean? Many players feel that acoustics made in the early days after the dreadnought design had been created used better construction methods, qualities and materials compared to guitars produced today. In their historic designs, Blueridge attempts to capture some of that magic.
Basically, Power Soaks are in-line devices that attenuate the signal from a full-out, saturated tube amplifier, preserving the tone and sustain while vastly reducing the bone-crushing volume. That signal flows from the attenuator to a speaker cabinet, which is then miked, reproducing the sound at a very manageable volume level. A Power Soak is like a second master volume control, absorbing the full power of the amp and converting that power into heat (these units get very hot!) while passing only a small portion of that power to the speaker. While there is an inherent loss of the natural non-linear speaker distortion associated with screaming guitar amps, and the pleasing sizzle and cabinet "thump" that results, the trade-off is obvious.
For years, Schecter has provided a nice counterpoint to the various Les Paul and Strat look-a-likes on the market (many of which are very good) at an affordable pricepoint. As my local guitar shop owner once said, for the money, they might make the best all around guitar south of $1,000. You can spend more than that, but the point is, they don’t skimp downrange.
I was paging through my daughter's Rolling Stone Magazine today and saw a small article with three different artists that use Harmony Guitars and they were singing their praises. I'm an old dude (or shall we say vintage)who's not familiar with all of the new bands popping up today, so I can't even tell you who these artists are. However, I did find it interesting that Rolling Stone did a spot on these guitars. I was too young to get my hands on many Harmonies when I was a kid, so I can't comment on their quality, but I know they were budget guitars and weren't considered anything special back then.
The bridge (or “tailpiece”) is the piece near the back of the guitar that anchors the strings and helps transfer their vibration to the guitar’s body. There are really only two main types: vibrato and non-vibrato. Non-vibrato bridges are exceedingly common and provide the best sound transfer. Vibrato tailpieces feature a tremolo arm or “whammy bar” that alters the string tension when pushed and pulled, resulting in a change in pitch that sounds really cool. Vibrato tailpieces don’t transfer sound as well as non-vibratos because they have reduced contact with the body of the guitar. This can result in loss of sustain. Furthermore, the constant changes in string tension can send the tuning out of whack. Don’t say you weren’t warned.
I'm going to break this review into pros and cons. Pros: Top notch wood, electronics, wonderful bound neck and great machine heads. The action/fretboard are wonderful (after being setup). Sounds beautiful!, and more so if you take my advice. One last pro, all of the cons are easily remedied. Cons: The saddle, nut, and bridge pins are plastic (kind of like putting crap tires on a good sports car). I replaced the saddle and nut with tusk, and for the bridge pins I went with brass. It was like the volume went from a 4 to a 8, and the tone went from nice to beautiful and singing. It was about a 40$ upgrade, that made it sound like a thousand dollar guitar. This is the first time I bought a guitar before playing it. The gamble more than paid off. Been playing guitar for 25 years, and I
The D-120's all-mahogany body strays from conventional spruce top design, which results in a warmer and more articulate tone. This particular tone is ideal for guitarists who sing, and for those who accompany vocals, it also blends well with conventional spruce top acoustic guitars, easily cutting through the mix with its lower-mids emphasized voicing. And since the body is crafted from solid mahogany, you can be sure that the instrument grows with you, sounding better with age.
The use of two or more mics is likely to result in other phase issues when these mics are combined in the mix, since they will almost certainly be capturing sound waves that reach the mic capsules at slightly different times. Whether such issues are bad enough to cause a problem (or even be heard) depends on the situation. First, if your two mics sound odd and hollow and/or lacking in low-end from the outset, flip the phase of one (usually via a switch on the preamp or afterward in your DAW) to ensure you aren’t trying to blend two mics that are reverse-phase in the first place. If your two-mic sound goes from hollow and thin sounding to fat and full, you had a reverse-phase issue. If it doesn’t improve – or gets worse – you need to consider other remedies. Once you know that both mics are at least in phase with each other, you can improve their phase relationship even further by moving the position of one around until any other sonic oddities are less obtrusive, which is simply determined by finding a pair of positions that are really smoking tone-wise.
You’ll notice that once it reaches zero sound gets very muddy very fast. That’s because we have zero resistance between the signal and the cap. To prevent this, some people put a small resistor (10K or so) between the pot and the cap. That way we won’t affect pot operation at higher settings (510K is very close to 500K) but at lower settings it will prevent it from reaching zero as we’re always adding 10K in series.
This is a guitar that we’ve featured before as our top pick for those who are looking for an electric acoustic for less than $500, so there’s no surprise that it’s back as one of the very best prospects at any price at all. Epiphone might be Gibson’s more affordable brand, but that certainly doesn’t mean you aren’t getting very high quality when you choose the Dove Pro.
The F-55 was identical to the F-50 except for the addition of a bridge DeArmond humbucker, plus the attendant three-way toggle on the cutaway horn and a second set of volume and tone knobs flanking the treble f-hole. The F-55, too, had a Martin “M” trapeze tail. This series began with guitar #279831. Some 1,700 F-55s were made from mid-’62 to the summer of 1965.
Sound quality-wise, it’s too close to call. All modern Zoom, Line 6, Boss, and DigiTech multi-effects units sound excellent. Distortion sounds a bit better on the DigiTech, and if reverb is your thing it doesn’t get much better than the Lexicon verbs. The other multi-effects units might be better if you’re looking for more experimental sounds and textures. The DigiTech RP500 tends to be more conservative, and focuses on nailing the classics.
From shopping for a first electric guitar to setting customized action, this do-it-yourself playerÕs primer for owning and maintaining an electric guitar explains the ins and outs of: choosing the right guitar; cleaning, tools and basic maintenance; personalizing and improving on a "factory setup"; trouble-shooting; basic guitar electronics; setups of the pros; and much more. Written by Dan Erlewine, author of the bestselling Guitar Player Repair Guide and the popular "Repairs" column in Guitar Player magazine, this book also includes a plastic sheet with specialized guitar tools you can snap-out!

Chrome ES-335 diamond trapeze tailpiece. This is a short version of the standard ES-335 style tailpiece which was also used on many arched top instruments. Overall length of Tailpiece not including hinge = 3 1/8 inches. Side to Side width at bar = 3 9/32 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Distortion became more popular from the mid-1960s, when The Kinks guitarist Dave Davies produced distortion effects by connecting the already distorted output of one amplifier into the input of another. Later, most guitar amps were provided with preamplifier distortion controls, and "fuzz boxes" and other effects units were engineered to safely and reliably produce these sounds. In the 2000s, overdrive and distortion has become an integral part of many styles of electric guitar playing, ranging from blues rock to heavy metal and hardcore punk.

The Blackheart Killer Ant is for beginners that want a better quality, overdriven guitar tone, but do not want to pay the prices that tube amps usually cost. Unlike the Hot Rod Pro Junior III, the Killer Ant is not loud enough for live performance, but it makes a solid practice amp. The Killer Ant is for beginners that want to start playing on an amp with a really good tone and are willing to pay a little more money for that. It’s a solid choice, even with the limited amount of built in features.
In this section we look at the overall performance of the guitar. How does it feel to play and what does it sound like? The ultimate sound you achieve will largely depend on the amp you play through, but the guitar itself will play a huge part in sounding good. Do the pickups give enough clarity? How comfortable is the neck to get up and down? Is it built for speed? The more expensive a guitar, the better the performance should be, and this is taken into consideration when rating it.

The Hawaiians are likewise hard to identify. One looks to be similar to the later Teisco EG-7L, with a Gibson sort of shape and a pair of offset rocket shapes on either side of the pickup which house roller wheels for volume and tone. A second appears to have a rounded body similar to a Rickenbacker frying pan, looking perhaps like the later Teisco EG-K. This had the same slotted pickup as the J-1, and a single volume control. Finally, there’s an unidentified eight-string lap with an elongated sort of rectangular body and an elevated fingerboard. This had a volume and tone with white knobs, and the tuners were behind the head, rather than sticking straight up, as on later eight-strings.
With a growing popularity of the Les Paul guitars, hundreds of unendorsed imitations and copycat versions had appeared on the markets. However, due to the lack of U.S. legislation to address patent infringements and restrict the import sales, oversea imitations caused legal and financial problems to the Gibson Guitar Corporation. An also troublesome thing was the existence of high quality imitations of vintage Les Paul (and vintage Stratocaster) produced by oversea manufacturers.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
BassLab: This company can be best described as someone who goes completely against believers of tone-wood theory. They basically employ monocoque carbon fiber construction for their guitars, yeah you heard that right, the entire guitar technically becomes a continuous piece of carbon fiber with not even a trace of wood in it. The construction process for these guitars is pretty much same as F1 racing cars and is quite pricey. Since the guitar uses a monocoque carbon-fiber construction they offer the option for extremely thin profile necks, because making the neck thin doesn’t impact the structural strength of a monocoque guitar. This enables them to make their guitar necks even faster to play than those Wizard necks found on Ibanez guitars. As for bridge, well almost all BassLab guitars are headless, the ones with trem use high quality headless trems made by J-Custom, the design of these trems are based on the much acclaimed (but now discontinued due to high production cost) Steinberger S-trem which are a piece of cake to tune and hold their tuning as good as hardtail bridges. Just like Strandberg they also offer the option for Cycfi XR pickups, but unlike Strandberg since the BassLab guitars are made of pure carbon-fiber there’s barely anything on it to color the sound of those pickups, this gives them an extremely precise and transparent clean tone unheard on any other guitar. They also make acoustic guitars, for acoustic guitars they have option for carbon-fiber and wood composite to replicate tone of woods, or you can go for usual monocoque pure carbon-fiber construction for completely unadulterated tone from the strings. They are one of the few guitar makers who have dared to rise above the confines of traditional guitar making and have created what can be best described as guitars of the future.
Join the "Cigar Box Revolution"! This La Vox Cigar Box Electric Guitar is built from a decidedly uptown-looking round box. Neck-through construction means it is heavier than most cigar boxes, and it performs more like a standard electric guitar. Play some raw, smokin' blues, back-alley funk, or whatever else wells up from deep down inside.  More details...
When I first tried multisourcing, on a solo project by Club Foot Orchestra guitarist Steve Kirk, I used an air mic, a direct source (Manley tube DI box or speaker emulator output from Kirk's Marshall JMP-1 tube preamp), a close mic on a clean-sounding Fender Princeton amp, and close and distant mics on a cranked-up Marshall cabinet (see Fig. 2). And that was just for the first rhythm track! As you may imagine, mixing was a lot of fun, and after that day there's been no going back to the old SM57 shoved up against the grille cloth. If you dare, you can take it from there. The only limitations are your time, the guitarist's patience, and available tracks. Oh yes-and lots and lots of mics.
Enter the polyesters and the polyurethanes. These plastics can be made into synthetic resins which harden after application the guitar body, making them more durable than nitrocellulose finishes. In some cases, UV light can be used to initiate the curing process of the resin, making the finishing process much quicker than the application of nitrocellulose lacquer.

Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.
This electric guitar style has experienced surges and lulls in its popularity, but has never fallen off the scene, due to the number of great players who have chosen to use the Flying V, such as Jimi Hendrix, Dave Mustaine, Kirk Hammett and Michael Schenker.  The Flying V offered many of the same benefits as the SG with a much more distinctive body shape.  It is now a very common guitar among heavy rock and metal guitarists and will achieve its destiny of being a guitar of the future!

Daron Malakian (b. 1975) is the lead guitarist for System of a Down. During the System of a Down era, Daron played IC200's and IC300's on stage. During the Toxicity era, Malakian played a variation of the Ibanez Iceman ICX, with custom artwork designed by his father, then a special edition "DMM1" was released by Ibanez. The DMM1 featured more artwork by Malakian's father, Vartan Malakian (b. 1947). After using Gibson guitars for 5 years, Daron switched back to Ibanez and began using an Iceman again.

This pickup is a solid choice for those who might want to keep their options open in terms of style or who have a responsibility to multiple genres and music types. Typically you’ll use the JB model for the bridge and the Jazz model for the neck, matching the configuration for notable users such as Seymour Duncan himself, Randy Rhodes and Jeff Beck.

For the acoustic guitar player, plugging in to an external amp and effects processor can be quite fun, and can add a lot of 'spice' to your playing, just by virtue of having access to a wider range of sounds. But whereas hauling an acoustic guitar with you isn't a big deal, hauling an amp and accessories with you (and finding a place to plug in) can be challenging.
Optocoupling Compressor using a LED and a LDR. Similar to Colorsound Supa Sustain or DOD 280. As others have mentioned, instructions are a single photocopied sheet showing component layout. There's no mention that you'll need a piece of heat shrink to fab up your optocoupler. If you have some experience you can figure it out. Wire was not supplied.

In more recent years, a diverse cross-section of artists have started to favour Rickenbacker guitars. In 1979, Tom Petty and Mike Campbell of Tom Petty and the Heartbreakers would adopt the Rickenbacker 12-string “toaster” jangle into their records and still use the vintage 1960s models. The post-1960s “Hi-gain” pickup-equipped guitars are associated with The Jam and REM. The “Hi-gain” pickups are well suited to harder spiky pop/rock sounds as well as the classic clean chime.
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.
Although acoustic guitars have recently surpassed electrics in popularity, the electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. If you want to play in a band, you’ll probably want an electric guitar. You’ll also want one if you want to develop the ability to play melodies and solos because electric guitars are, in general, better designed to accommodate fast fingering and more able to stand out in a musical group.
Fender: Fender guitars are the best example of the old saying “Keep it simple”. They aren’t futuristic, there’s nothing unique about them, they are kinda too simple, their craftsmanship isn’t astronomical but when it’s about outright ruggedness rarely any other guitar comes close to them. Leo Fender designed the Fender guitars to be reliable working man guitars and they still hold true to that quality of theirs. I’m pretty sure if someone buys a good quality Fender guitar (especially the Tele) pretty much his sons, grandsons will still be able to play on that.
One of the most respected guitar manufacturers in the world, Epiphone electric guitars can be found everywhere from small-town basements to the biggest arena rock stages. The reason is because of their dedication to providing high-quality instruments for musicians of all tastes and skill levels, and throughout this catalog you'll find more than enough choices to prove it. After all, everyone who has a desire to crank up and play deserves an electric guitar that looks, sounds, and performs flawless, and Epiphone has an option for every budget. It's easy to see how trusted the Epiphone name is when you consider how many best sellers and top-rated items make up this section. For that matter, all you have to do is look at the many top-recording artists who have Epiphone signature models, including metal legend Zakk Wylde, virtuoso Gary Clark, Jr., and Tommy Thayer of Kiss. Speaking of signature guitars, check out the popular Limited Edition 2014 Joe Bonamassa Les Paul Standard Electric Guitar. Sporting a gorgeous Pelham Blue with a black back and a Bonamassa neck profile, this axe looks as slick as it plays. As for its sound? You can expect plenty of power in every chord you hit thanks to the Gibson USA BurstBucker-2/3 humbuckers. Now for those who prefer the lightweight feel and ringing sound of a semi-hollow, go with the Dot Electric Guitar. Equipped with dual humbuckers and a 3-way pickup selector, the Dot can go from growling snarls to crystal-clear sustain. Additionally, the two volume tone controls allow you to tailor your sound, while the smooth, 22-fret rosewood fretboard means you can play at lightning-fast speed. And this is only a taste of what Epiphone has in store for you. In fact, taking a tour through Epiphone's extensive selection of electric guitars is just as fun as playing them. From solid body electrics and hollow bodies to semi-hollows and even guitars for left-handers, the options are seemingly endless. So stick with Epiphone, and you'll have no problem finding an instrument that reflects your own discerning style.

I knew what it is that I need to do. The friend who worked on it with me said when we were finished, "Oh right, it sounds like all your records all put together." I guess that got the job down. Without getting too technical about it or elitist, it kind of does the job of a Gretsch, sonically, and a Rickenbacker, sonically, but I play it like a Fender. It's kind of handy, really. I used to it pretty much exclusively during my time with Modest Mouse. And totally exclusively during my time with the Cribs. I've used it nearly entirely on the new solo record.
The Ibanez Artwood AW54 is easily the best bang-per-buck all-mahogany-body dreadnought in the market, for the price you are getting an acoustic with solid mahogany top, back and sides. I am definitely envious of students who have this as their first guitar, with its impressive specs and genuine vintage appeal. And it's not just for newbies, because experienced players appreciate the articulation and warm tones of this all-solid mahogany body guitar.
The Ibanez JEM77WDP Steve Vai Signature guitar features a rosewood top on a mahogany body. The maple and walnut neck with a slim Wizard neck profile is topped with a 24-fret rosewood fingerboard with jumbo frets and Tree of Life vine inlays. This model also has a striking wooden pickguard and matching headstock, as well as wooden control knobs, earning it the nickname “Woody.”

This is normally when I tell you about a crowdfunding campaign, but there isn't one currently running for this device, so if you're interested in getting a ToneWood-Amp when it's launched, sign up at their website to register for pre-ordering. There is no commitment to buy one for signing up, but if you sign up now, you can then order one at half-price ($90) when the pre-order campaign goes live (mid-October).
Anyway, this little beast didn’t need much work. This is one of the pleasures of working on a Champ-style practice amp. They have so little in them, there’s simply not much to go wrong or fix. This one, it turned out, only needed a filter cap job, a new preamp tube and one coupling cap. Piece o’ cake. Twenty minutes of soldering and one $4.00 7F7 tube later, I had a monster little Champ-esque amplifier (actually it sounds a little more like the Gibson Skylark than a Champ, but that’s cool by me) for under $80.
Except for the Epiphone Les Paul Express’s total domination of the mini guitar category, there was no clear leader among the guitars, and our picks are the guitars that got the best average ratings. Our testers found lots to like in many of the guitars we tried, and you may find an axe you like better in our competition section below, where we include comments on all the guitars we tested.

Ultimately, his thesis is shared by every single person interviewed for this article. It simply does not appear that there’s any way to objectively measure what is “good” guitar tone. A major reason for that is the infinitely varied human element of the musician performing and the audience listening. The impossibility of proving anything doesn’t, however, change the fact that so many guitarists revere those early tones. Some argue that’s because the early days were just better. Others point out that we’re simply intransigent.

Being part of the Gibson family, Epiphone today makes a variety of officially-sanctioned Gibson classics, including the Les Paul, which comes in versions including the Tribute with authentic Gibson pickups and the Special II with Epiphone's own pickups. There are also Epiphone editions of the timeless Gibson SG, like the G-400 Pro which is available in right or left-handed versions.

In 1952 the pickup selection circuit was modified by Fender to incorporate a real tone control. Between 1953 and 1967 the neck could be selected alone with a pre-set bassy sound and no tone control, in the middle switch the neck could be selected alone with the tone control and finally the bridge could be selected with the tone control. Although this provided the player with a proper tone control, this assembly did away with any sort of pickup combination. Eventually from late 1967 Fender again modified the circuit for the final time to give the Telecaster a more traditional twin pickup switching system: neck pickup alone with tone control in the first position, both pickups together with the tone control in the middle position and in the third position the bridge pickup alone with the tone control.[2]
There's no doubt about it, the CJ35 is utterly breathtaking. Every angle, every edge chamfer and detail is executed with the kind of meticulous precision rarely seen in guitar- making at any level. The specs might look simple on paper, but the tiny details delight, for example the perfect walnut strip down the centre of the mahogany back, the unfussy yet charming body binding and rosette and the cut-through bone saddle that extends into the shoulders of the unfussy rosewood bridge. It weighs next to nothing, and you can feel the thing vibrating the second you take it from the case. The quality of build, not to mention the precision and depth of the CJ35's tone are second to none. A scarily good, once-in-a-lifetime guitar for a very lucky few.
But narrower frets were also used on Gibson Les Pauls prior to 1959, so their characteristics apply to these guitars as well. Does a ’57 goldtop with PAFs sound thin or whimpy thanks to its narrow fret wire? Not likely, largely because so many other factors also affect its tone—body woods, set-neck construction, scale length, pickups— and the impact of narrow-gauge frets doesn’t outweigh any of them. It does, however, influence the overall sonic stew of guitars of that era, which is always the product of many different ingredients.
Hey Johnny, have just been reading your article which I found very interesting. My 11yr old daughter, a great ukelele player & an extremely quick learner, I am thinking of stepping her up to a guitar. The delimar is an acoustic or a bothie acoustic-electric, as she hasn’t established her style of music yet, thought a bothie would give her both options. Am hoping you could express some advise on what could be the best way of approaching this transition and a list of guitars to check out for her. I don’t want to be fooled and purchase a sh*t one so to speak! Greatly appreciate your time and advise. Thanks Jules
Fender has shown the spec sheets of its popular Mexican-built Deluxe Series Roadhouse Stratocaster model some love to create a reboot that comes seriously well appointed. The upgraded model features an alder body and bolt-on maple neck, with the option of maple and rosewood fingerboard, finished with satin polyurethane. Keep sniffing around and you'll find other features like the 'Modern C' neck profile, 22 narrow/tall frets, a contoured neck heel, synthetic bone top nut and a set of locking tuners with vintage-look buttons. While the previous editions of the Roadhouse and came with a 241mm (9.5-inch) fingerboard radius, the new model packs a flatter 305mm (12-inch) camber. Yes, the same radius as a Gibson Les Paul, making for easier string bends and lower action. The new Roadhouse features three Vintage Noiseless (1st generation) single coil-sized humbuckers wired to a five-way pickup selector blade switch, and master volume and tone controls. Lurking between the volume and tone knobs is the V6 preamp control, a six-position rotary switch that gives you access to a series of tweaked single-coil tones. Plugging in the Roadhouse reveals a slew of classic Strat tones. The pickups exploit the natural tone and woodiness of the guitar, while the Noiseless aspect lives up to their vow of silence, making them indispensable in a recording situation. As a result, bar metal, this is the best Fender electric guitar for just about all scenarios.
The switches and jack sockets are important in a reliability sense first and foremost I feel. In a play-ability sense, you want a firm feeling, accurate switch and one that lasts well with regular use. You want a jack socket that doesn't fall apart or get too crackly over the years of years, they take a lot of abuse! So here there's no 'magic vintage tone' secret, I would just recommend quality switches from the brands renowned for their years of producing reliable items. I trust and use those from Switchcraft, Pure Tone, Oak Grigsby & CRL. All very solid, well made items that last really well. In particular, I've been predominantly using a multi contact jack socket made by a company called 'Pure Tone'. Please forgive their brand name, as this isn't some tone transforming jack socket, but it is a common sense improvement of an old design which is great. It features 4 points of contact for the jack connector, two for the hot, two for ground. 100% greater surface area, giving it a firmer seat on the jack connector and a sturdier, more reliable connection which is a no brainer upgrade in my opinion.
After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
As the name implies, a pickup selector is a toggle switch that controls which pickups are being used. Since most electric guitars have at least two pickups, a pickup selector is a crucial piece of the overall tone of your guitar. Pickup placement will create different tones; thus, switching between the bridge and neck pickups will allow you to change the tone of your guitar. With multiple pickups, there are many pickup selection combinations.
: This vintage YAMAHA is one of the greats folks and here for your serious consideration today at Joe's Vintage Guitars.... This is the Classic Vintage Yamaha FG-200 - Nippon Gakki body seems the same specs as the famous FG180...hummm? interesting She's been lovingly played for nearly 40 years,its beautifully aged now with a great feel & patina only found on real vintage guitars of this age and caliber. This guitar really has nicely opened up over the past 40 years and you just don't get booming bassy tone like this one with a new guitar thats for sure. This example is not mint but is beautiful in its own right, it does have a few nicks, dings and wear but nothing really bad at all really she just looks the part of the 40 year old Martin D28 vintage guitsr. A lot of guitar for not a lot of cash... Vintage aint goin down..get her at a great price today! Let me know...thanks for your interest, Joe email me: This is an early one from the Nippon Gakki plant and has a surprising boom even for or a 200 same as our great old red lable FG180 for that matter with no real decernable diference. I cannot find a serial number but is believed to be late 60's - early 70's This old girl has Excellent low end sound!!! and tone on this guitar is wonderful - it really booms! Condition: Average vintage wear wich includes minor pick wear, scratches dents & dings for an old vintageguitar. but no cracks to be found, straight neck, trussrod is functioning properly, very good frets still playing well all the way up & down the fingerboard with no funny buzzes or dead spots... Frets 1 - 5 ( cowboy cord area )have medium play wear but still plenty of life remaining no problemo. action is very good at 3/32 1st E string @ 12th fret. Tuners are the original and in excellent working order. Bridge plate is securely fastened to top. We have just as a precationary installed A PlateMate brass plate has now been installed to any prevent further wear to bridge plate which is common among these vintage guitars. This brass plate has also contributed to its big booming tone now is even a more rich sounding competitor to a vintage Martin D-28... FRESH SET UP...with Martin Bone & Saddle... this guitar is a wonderfull fun guitar to play lots of bang for the buck factor here.. This guitar is overall a very solid well built guitar that is standing the test of time it also is a great sounding vintage guitar that plays very nicely. Ya can't go wrong with this wonderful vintage Yamaha FG Nippon Gakki guitar Has a new bone saddle and Martin Silk Steel strings. No case included but will protect and properly package for shipping. PlateMate product works very well and is easily removed if desired. To my ear it enhanced this boom-box's sound quality and is described by the manufacturer as follows: If you want to protect and enhance the sound and tones and balance out string volume of your acoustic guitar, Mitchels Plate Mate is the way to go. Mitchels Plate Mate is a small piece of brass that is applied without using or altering of tools, and is installed as fast as you can change a set of strings. This was invented and patend mainly to prevent damage caused by ball-end strings on the acoustic guitars bridge plate, it is also proven to enhance volume, tones, and balances out string volume by one of the best acoustic guitar makers in the world. Mitchels Plate Mate will protect your guitar from ball-end strings pulling up threw the bridge plate and possibly cracking the bridge or pulling the bridge off the top of your guitar which would be a very expensive repair bill. It also protects your bridge pins, and saddle by making the string windings stay down in the string holes where they belong. I have used Mitchels Plate Mate in guitars priced from $100 to $50,000 it doesnt matter the price just protect your prized posetion or investment. .
The two most prominent electric guitar brands overall are Fender and Gibson. Although you won't find guitars with those labels on the headstock in this price range, both of them have sub-brands under which they sell their entry level models: - Fender owns the Squier brand and Gibson owns the Epiphone brand. Other well-known brands that have guitars in this price range include Dean, ESP, Ibanez, Jackson, Kramer and Yamaha and Washburn.
While recording AC/DC's Back In Black, Tony Platt used a pair of condenser mics to pick up different speaker cones and give a wider sound to each guitar: "I developed a technique for recording guitars with two microphones roughly pointing at different speakers, which can be spread out in the stereo mix so it's not just a series of mono point sources. It makes for a more open-sounding guitar. That sound suited their particular technique, which involved Angus and Malcolm playing the same chords but with different inversions to get a very big unison guitar sound."

For solidbodies there is usually a one- or two-letter prefix indicating the body style or general model. This is followed by a dash and a number which usually indicates the number of pickups (e.g., J-1), although on occasion the number indicates the year of introduction (e.g., TG-54). Guitars bearing a vibrato usually appended an “L” after the pickup number (e.g., MJ-2L).
How a guitar feels is highly subjective – after all, even guitarists come in all shapes and sizes. While the acoustics in our list are all made in such a way that most guitarists will find them comfortable and easy to play, there’s still no beating being able to try several models out so you can choose which one feels like it’s a part of your body.
Nylon strings are essential for any classical instrument, and if you are planning to play classical music or Latin styles such as flamenco, a nylon string guitar is the way to go. Steel strings are more appropriate for rock, pop, blues, and pretty much everything else that doesn’t fall under the classic umbrella. You can check out our article on the best classical guitars for beginners.

Starfield was a guitar brand owned by Hoshino Gakki. In the 1970s, Hoshino Gakki and Kanda Shokai shared some guitar designs and so some Ibanez and Greco guitars have the same features. The Kanda Shokai Greco guitars were sold in Japan and the Hoshino Gakki Ibanez guitars were sold outside of Japan. From 1982, Ibanez guitars have also been sold in Japan as well as being sold outside of Japan [3].

I am an SG player through and through. I own a bunch of them- mostly from the initial run of SG Special Faded with the moon inlays, because that particular run felt right to me. I am looking to have a custom SG style guitar made, but I don't know of any builders who make SGs. Can anyone tell me a boutique or custom shop builder who does SGs? Thanks!
The Gibson Mandolin-Guitar Mfg. Co., Ltd. was founded by Orville Gibson in 1902 in Kalamazoo, Michigan when he brought in a consortium of investors to finance expansion to keep up with demand. Orville had been selling his hand made instruments since 1894 and was awarded a patent for his one-piece designed mandolin in 1898. He also invented Archtop Guitars around that same time by applying similar lutherie techniques to those used on violins.
There’s 12 footswitches for you to control all your sounds and effects as well as a smooth expression pedal that can control swells, wah and even make parameter changes. A looper with 20 mins of record time is ideal for songwriters, buskers and those who need to be able to write music anywhere. It especially shines when coupled with the HeadRush FRFR-112 2000 Watt Powered Speaker.
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
Having a tuner on your pedal board is useful but these days I more often use a clip-on tuner, specifically the TC Electronic Polytune Clip (Buy at Amazon UK, Amazon US). I don't like the main signal to run through the tuner all the time if I can help it (I use the GigRig G2 switching system) but if you don't have that luxury, then look for a tuner with True Bypass like the TC Electronic Polytune 2 (Buy at Amazon UK, Amazon US) or use a Volume pedal that has a Tuner Output (many do these days!).

I love the action of my El Dorado. I have no more “dead strings” because of the string height and because of the wide nut which allows more room between the strings and the frets. It has an action that provides playability which no other guitar gave me, that is, no: Fender, Gibson, Schecter, Epiphone, Squier, B.C. Rich, Urban, Yamaha, Reverend, Peavey, Ibanez, or ESP. There were others I tried but I don’t remember the names. It sounds great when I play Psychedelic Rock, R&B, Rock, Heartland Rock, Folk Rock, and old Country.
Launch price: $1,499 / £1,399 | Body: Ash | Neck: Maple | Scale: 25.5" | Fingerboard: Maple/rosewood | Frets: 22 | Pickups: 2x V-Mod Single-Coil Telecaster | Controls: Volume with treble-bleed, tone, 3-way selector switch | Hardware: 3-saddle, strings-through-body Tele bridge with compensated brass saddles, 6-screw mounting with removable modern 'Ashtray' bridge cover | Left-handed: Yes | Finish: Mystic Seafoam, 2-Color Sunburst, 3-Color Sunburst, Black, Butterscotch Blonde, Candy Apple Red, Crimson Red Transparent, Natural, Olympic White, Sonic Gray
The specs for this stripped-back Singlecut are identical to PRS's gloss Standards; the difference is in the paint - or, rather, the lack of it. Instead of that faster S2 gloss, here we have a nitrocellulose satin finish that doesn't bother with grain filler - you can easily see the body wood's grain and feel it on the neck - for a thinner finish, which will wear and age the harder you play it. Plus, thin finishes don't choke any vibrations or resonance. Along with the dot-only fingerboard inlays, this Satin Singlecut looks very workmanlike, but the build and parts still deliver the goods. The body is one-piece mahogany, the neck three-piece. The bridge is the USA Stoptail, the locking tuners, like the pickups, made in Korea to PRS specs. The pattern regular neck is a nice mainstream handful, and setup and intonation are, as ever, top-drawer. Mahogany guitars can be dark-sounding and here, yes, there's a throaty midrange focus, but a clean-edged ring and resonance that provides clarity and punch, much like the pickups that nail an almost P-90-ish sizzle and classic-rock poke. The four-control layout means there's plenty of adjustment, and the coil-splits on the tone controls add authentic single-coil cut. Clean, low, medium or high-gain, this one's a banker: the most rock-out, resonant blue-collar PRS we've ever played, and that's why it's one of the best electric guitars, especially at this price point.
Overdrive distortion is the most well known of all distortions. Although there aren't many electronic differences between a distortion an overdrive, the main audible one is that a distortion does exactly as the name suggests; distorts and clips the signal no matter what volume is going through it, the amount of distortion usually remains relatively the same. This is where an overdrive differs. Most overdrives are built to emulate the sound of a tube amp overdriving and therefore give the player control of the clipping through dynamics. This simply means that the effect gives a clean sound for quieter volumes and a more clipped or distorted sound for louder volumes.
While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:
Here’s the thing about acoustic guitars: those that use solid wood command a higher price than those that use laminates for their soundboard. Acoustic guitars that have a solid top are more sturdy and sound better as the wood matures. This is why solid wood models are usually more expensive, and also why they come highly recommended if you want to make a really good investment.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"distortion & overdrive effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category3"}
I wish I had a cool story to attach to this guitar, but really this one is a history lesson regarding the development of Japanese guitar manufacturing.  Plus, it’s an example of some rare component combinations (like the pickups) that make guitars like these worth buying.  THEY’RE SO CHEAP!!  Hell, buy one of these for $200, send it to Dano and sink another $100 into it, and you’ll have yourself one hell of a player!  It’s like recycling, dude.

I love this little guitar. it's perfect for my smaller hands to move around on the fretboard. I've been taking guitar lessons for a year and own a full size acoustic and a electric but I love that this one is both. For the price I wish it came with a stand and cable for an amp though but it's a great starter guitar for kids or a person with smaller hands. I would recommend it. it's acoustic and electric. You will need to buy an amp with a cable to use it as an electric but no cable is needed for acoustic. It even has a built in tuner, they supply the batteries.

It doesn't even seem to matter which kind of Guitar amp you have or when plugged into any PA system. This guitar is a keeper. it comes with Godin Nickel Strings which is why unplugged it may sound too tinny to some ears, but after changing to Elixer Acoustic Strings, it sounds much better unplugged and really shows off plugged in. It now can give my Acoustic six strings a real run for my attention. At gigs and open mics, people come up and ask,,,what the Heck is this Bruce? Looks and sounds amazing. My only wish is that it had the same Pick-up system as on my A6 Ultra, two separate Pick Ups and Controls and two 1/4 in outputs.
Beatles guitarist George Harrison bought a 425 during a brief visit to the USA in 1963.[7] In February 1964, while in New York City, F.C. Hall of Rickenbacker met with the band and their manager, and gave Harrison a model 360/12 (the second electric twelve-string built by Rickenbacker).[7] This instrument became a key part of the Beatles’ sound on their LP A Hard Day’s Night and other Beatles songs through late 1964. Harrison played this guitar sporadically throughout the remainder of his life.
Although the hollow bodies of these guitars create a mellow, naturally voiced tone perfect for jazz, vintage country and other styles that require warmth and clarity, they can also snarl. For proof of the latter, check out Lennon’s performances on “Revolution” and “Cold Turkey.” Too much volume or proximity to the amplifier, however, and hollow bodies can howl with feedback unintentionally. And that’s why the semi-hollow body guitar was invented.
Beyond those generalities, replicating a standard formula for the be-all-end-all tone isn’t possible. Why? Because some people will genuinely pass on a ’59 Les Paul and Marshall stack combination—they might prefer what sounds like a vibraphone under water. Sometimes, a certain “it” factor just grabs musicians and won’t let them go. Waara explains that even in a business as technologically advanced and specialized as Line 6’s tone research, “There’s no escaping that we emotionally say ’Man, that just sounds cool.’ ” Frequently, part of that “cool” factor is imprinted on our brains as a result of a component that we often overlook.
Monte Allums Mods – Tweaking the tone of inexpensive stomp boxes is an obsession of Monte Allums. He started modding mainly because he refused to spend $200 to $300 or more to achieve great tone. Monte believes that most expensive boutique pedals are simply clones of inexpensive pedals, but upgraded with higher-quality components. So his mods and kits feature classic designs with better components to deliver superior tone.

Ibanez JEM77WDP Electric Guitar With the Ibanez JEM77WDP Steve Vai Signature guitar, you can get a little piece of the legendary guitarist. This model is also commonly referred to as the JEM Woody because of its distinctive poplar burl veneer pickguard and matching headstock. Part of the company’s Premium line, the JEM77WDP electric guitar also features two cutaways and Steve Vai’s signature monkey grip.
I inherited a guitar and am looking for any information I can about it. It is a Kent model 533 Videocaster. I have no idea when they were made or what this one might be worth. It is a solid body, but I know next to nothing about guitars so I am not sure what other info might be needed. It needs to be tuned/serviced and possibly needs a little restoration, but otherwise it works and is not in horrible shape. Any info would be appreciated.
How is PRS 12? Most pro's have switched from Gibson to PRS, or from any brand to PRS for that matter. Go to any guitar store and put ANY PRS against any high end guitar and see for yourself. "Ibanhad" should be taken off this list, and all these 3rd rate walmart brands should be removed as well. How are there brands on the bottom of this list that don't even produce guitars?
Fuzz bass effects are sometimes created for bass by using fuzzbox effects designed for electric guitars. Fuzzboxes boost and clip the signal sufficiently to turn a standard sine wave input into what is effectively a square wave output, giving a much more distorted and synthetic sound than a standard distortion or overdrive. Paul McCartney of The Beatles used fuzz bass on "Think for Yourself" in the 1966 album "Rubber Soul"
We've had a thread here in the last couple months about Squires, with some pretty discerning forum members praising their quality and tone. You don't need to spend a lot of money these days for a good guitar. The one the OP bought was years ago. The fierce competition in the guitar market since the economy went bad, has forced manufacturers to up their game, and recent production is of a much higher standard.
Guitars come in two basic flavors: acoustic and electric. From a hardware standpoint, electric guitars have more components and doohickeys than do acoustic guitars. Guitar makers generally agree, however, that making an acoustic guitar is harder than making an electric guitar. That’s why, pound for pound, acoustic guitars cost just as much or more than their electric counterparts. Both types follow the same basic approach to such principles as neck construction and string tension, and so they have very similar constructions, despite a sometimes radical difference in tone production.
{"pageName":"[gc] pdp: in store vintage vintage 196s maxitone bruno sunburst hollow body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";113206695;;;;evar65=Vintage-Guitars-In Store Vintage","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
In terms of tone, a smaller dreadnought body will be slightly lacking in projecting the low-end frequencies. That doesn't matter here thanks to being an acoustic electric. With that said, the trebles and mids give away its origin, tone-wise. Play a few chords and you'll immediately hear that classic 'Taylor sound' even from a lower mid-range guitar like this one.
As the market for iOS devices and apps has grown, so has the availability of affordable stompboxes and processors that can store downloaded effects. Being able to sample, purchase, and download effects through an iOS app or digital download gives you access to a whole new palette of sounds. Though relatively new, in years to come this may well become the way in which most players will assemble their effects libraries.
The semi-hollow guitar is based on having a “tone block” that runs down the center of the body of the instrument.  This reduces feedback issues while still maintaining the woody tone of the true hollow body instruments that are widely used in Jazz.  This allowed the pickups to be mounted to a solid block, while the outer portions of the instrument are hollow, which are often adorned with “f-holes” much like instruments of the Violin family.  This type of build provides the resonance and tone of fully hollow instruments, while providing a resistance to feedback that allows the guitar and amplifiers to be used at a higher volume.
Upgrading the components in your guitar’s control cavity should give you significant improvements in tone and component life. If your guitar has single-coil pickups, buy 250K pots. If it’s packing ’buckers, go for the 500K jobs. If your ax has humbuckers and single-coils, I recommend 500K pots. This could make your single-coils sound a bit brighter than normal, but it will unlock your humbuckers’ full potential. For this job you’ll also need a soldering iron, solder, safety goggles, wire cutters, and a camera, to help you keep track of your original wiring connections (your cellphone will work just fine for this).

Jazz guitarist George Barnes is known to have played one of these prototypes in public in 1931, though far as I know, there's no recording of it.  Jack Miller played a "frying pan" in Orville Knapp's orchestra at Grauman's Chinese Theater in early 1932. Another musician, Gauge Brewer, bought two of the first available Beauchamp/Rickenbacher guitars, the other was a more conventional electrified Spanish guitar, and played them in a press event in Kansas, and a series of concerts around Halloween that year. Brewer also recorded both of these sometime in the mid-1930s, but it was one of the old direct-to-record recordings, a one-off, never released to the public (my Mom recorded a bunch of those 78s back in the 1940s and 1950s... tape wasn't quite there yet for regular folks).  Andy Iona was probably the first professional Hawaiian player to go electric.
Luthier Steve Lamb has been providing quality instrument repair in Fort Worth for over 30 years. Steve’s years of experience has provided musicians, collectors, students and friends the information and service necessary to keep their instruments in shape. Lamb’s Music is an authorized service/warranty center for most guitar manufacturers including – Fender, Gibson, Martin, Taylor and more.
ESP Is simply the best brand you could ever use, from it’s awesome quality ESP too their good quality/price realtion with LTD. You can use an LTD distressed series for playing classic rock, for blues also, and the Xtone series make their work too, and from their LTD standard and deluxe series to their ESP standard and signature series for the best and widest range of metal you could ever imagine, with them you can from Black Sabbath or Ozzy Osbourne, to Metallica and Children of Bodom. (Kirk Hammett, James Hetfield, Alexi Laiho, Henkka, Michael Paget, Gus G, Tom Araya, Jeff Hanneman and almost any japanese guitar and bass player that is considered good [Seriously, without exagerations or lying] endorses ESP guitars and basses).
Another Martin creation, the 000 shape guitar is almost the perfect halfway house between a dreadnought and a parlour. Its classic hourglass figure meant it sat comfortably on the knee, endearing it to players of folk and other fingerpicking-heavy styles of music. The shape ensured it had the perfect balance between playing and comfort, and was often seen on the lap of no less a player than Eric Clapton. However it wasn’t averse to a bit of heavy strumming when the occasion called, and it’s large bottom end ensured it could keep pace when playing with others.
Had gibsons, fenders, etc. Was really impressed with my washburn idol. Only downside is that there aren't many dealers, so you've really got to make an effort to get one in your hands. Dollar for dollar, one of the best brands out there. Quality can be spotty if you look on ebay, so I'd recommend craigslist... Buy em used, since they don't hold value like the big brands.

20 pages, black and white with color front cover. In the middle of 1981, Rosetti took over distribution of the Gibson line in the UK. Rosetti were a very big name in Britain, having distributed Epiphone since at least 1963, as well as Hagstrom and others. This catalogue was produced at the tail end of 1981, and introduces a number of models to the UK, such as the MV-II, MV-X guitars and the Victory basses, the GGC-700 and the Flying V bass. Some of these models were so short-lived that they were actually never included in US brochures. The cover image (reproduced in part here) showed some of the earliest demonstration models, including a Victory with a highly unusual white scratchplate.

Preamp, or gain, controls (sometimes called “volume” on master volume–equipped amps) let you dial in impressive-sounding distortion at low volumes, but excessive preamp distortion can sound too compressed and sizzling at high volumes. Turn down the gain and crank up the master volume until the amp is set at the output level you’d normally play at. Now, slowly increase the gain until the sound becomes as distorted as you want it to be. If the tone is buzzy and lacks dynamics, the amp will have all the onstage presence of an American Idol reject.
Perfect working condition Amp is an absolute beast, if you know anything about these AC30s you'll know that there tone is unbelievable. Make me an offer or trade These amps sell for close to 18k and well above that on oversees markets The amp does have some cosmetic ware but obviously does not affect the sound what so ever Gibson, fender, guitar Watssapp me 0737886874 Amp is based in Durban ...

What does all this have to do with guitars? Crudely speaking, the metal strings of an electric guitar are a bit like dynamos: they make electricity when you move them. Under the strings, there are electricity-generating devices called pickups. Each one consists of one or more magnets with hundreds or thousands of coils of very thin wire wrapped around them. The magnets generate a magnetic field all around them that passes up through the strings. As a result, the metal strings become partially magnetized and, when they vibrate, make a very small electric current flow through the wire pickup coils. The pickups are hooked up to an electrical circuit and amplifier, which boosts the small electric current and sends it on to a loudspeaker, making the familiar electric guitar sound. Usually, the amplifier and loudspeaker are built into a single unit called an "amp."
We're not suggesting you become your own handyman 24/7. If your house roof tiles are falling to bits, you'd call a pro, right? But basic setup can be done, and if you eventually need help from a guitar pro, it's good to be able to explain what your bugbear is. Guitar players and guitars are all different, and it's simply good practice to think about what you do and don't like about your treasured instrument.
AT LAST!! some gd stuf about john frusciante, hes the best living guitarist in my opinion. i don't get people who think those random metal shredders should belong in the top 10 list…. bein insanely good just on technical stuff means nothing… its kinda like shredding as fast as possible on a pentatonic scale, people will respect the skills, but wheres the soul? this is the exact reason why hendrix and jimmy page always get on these lists but not guitarists like buckethead, i mean seriously he has less tone then any of the GnR guitarists.. if slash is not on the list, theres no way the kfc man can get any close. to all the haters, tom morello is a very innovative guitarist and by far more creative then buckethead. I swear the world is no longer a place for good music.

When someone says: "I've got a Gibson Les Paul with Bare Knuckle Pickups" I tend to think well, you don't really have a "Gibson" Les Paul at all then, because you've removed the elements of the guitar that make it sound like a Gibson. But guitarists are a conservative bunch and tend to hold on to their beliefs, biases, and myths. I've not long managed to let go of mine and it's made me happier with the guitars I now have, and has saved me a lot of money!
I first met Ralph Novak in 1980, when he was working at Subway Guitars in Berkeley, California. I'd assembled a kit Strat and it needed a refret. My monstrosity was painted Shell Pink in tribute to Strats from Fender's surf era. Little did I know what was to come of Ralph's distant future. He was the fret guru in Berkeley, and his work was astounding - the best I'd ever seen! Ironically, Vintage Guitar columnist Stephen White was also working at Subway at the time. So began our journey into luthiery madness! Fast forward to 1989.
A basic overview of how they function might, the volume pot will receive a signal from the pickup selector it will then transfer this signal to both the tone pot and output jack. Pots can also come as ‘blended’ in which case it will control two pickups and may even have a toggle switch dedicated to just the one pot. This is much less common and won’t play a role in assembling an electric guitar kit in most cases.
Pedals allow instant variables, with built in effects you have to dial it in every song, I can turn on a chorus on the verse add fuzz on the hook and manage combinations in real time, much more flexible. Also boutique pedals like earthquaker devices and Devi Evers create much more complex sounds within each pedal, it really helps when u are trying to cultivate your own sound.

If you mean the Guitar Hero III guitar then there are two switches on the back. The one just below the neck of the guitar (It looks like a quarter of a circle.) detaches the neck so you can store the guitar AND the neck in a smaller space, and the switch towards the side of the guitar detaches the faceplate so you can put a different faceplate on, or play without a faceplate.
With this high availability I can immediately check back with the program if I am unsure whether I am getting it right when practicing. I can play along to the backing track while practicing and I can continue with new material if I feel that I am ready to do so. All of this is simply not possible with a local instructor on a 30 minute per week basis.
{ "thumbImageID": "Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Black-Cherry/J47212000002000", "defaultDisplayName": "B.C. Rich Warlock Set Neck with Floyd Rose Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Cobalt Blue", "sku": "sku:site51500000031734", "price": "596.27", "regularPrice": "596.27", "msrpPrice": "857.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Cobalt-Blue-1500000031734.gc", "skuImageId": "Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Cobalt-Blue/J47212000001000", "brandName": "B.C. Rich", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Black Cherry", "sku": "sku:site51500000031735", "price": "599.99", "regularPrice": "599.99", "msrpPrice": "857.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Black-Cherry-1500000031735.gc", "skuImageId": "Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Black-Cherry/J47212000002000", "brandName": "B.C. Rich", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Ostentatious Delays: If you're making very rhythmic music of any kind, it makes sense to use tempo-sync'd delays, to avoid undermining the main pulse. However, simple tempo-sync'ed delays tend to be masked by the main rhythmic stresses, so they sink into the background of the mix unless mixed very high in level, which makes it difficult to create ostentatious delay effects in rhythmic music without swamping your mix. One solution to this problem, very common in trance music, is to set a delay to a three-16th-note duration, which means that although the delay repeats never step outside the 16th-note grid, they'll often miss the main beats and therefore remain clearly audible. Mike Senior
The 2555X Silver Jubilee reissue has the same silver vinyl covering used on the originals, and looks just as handsome. The controls are pleasingly familiar, with a simple front panel layout featuring controls for bass, mid, treble, presence, together with a preamp gain and two master volume controls - one for lead and one for rhythm. A push/pull switch on the output master volume changes channels, while another on the gain knob flips the 2555X into rhythm clip mode, changing the clean channel into something a lot more aggressive. The third rocker switch changes the output stage mode from pentode to triode, dropping the power from 100 down to around 50 watts, and softening the attack a little. The sparse rear panel also features a series effects loop, a fixed-level frequency-compensated DI output, and a jack socket for a single-button footswitch, used to change channels. Overall, the 2555X is built to last and look good for a long time, with Marshall's typically high build quality and attention to detail. Apart from its association with Slash, Joe Bonamassa, and various other high-profile users, the main reason why 2555s are so sought after is their sound. We're pleased to report that the reissue amp is tonally as accurate as it possibly could be, with perhaps a touch more gain and low-end punch than the original. The 2555X accurately reproduces the original tone - and with a few minor exceptions, the look - of the original, at a price that's very reasonable compared with the competition, especially for a UK-made product.
Overall quality is Great! Great intonation and holds tune once the strings are "broke in", as with any guitar ! Everything you would expect from a quality instrument. Action could be a little lower, but that can be a fairly inexpensive modification. The "extras" are decent except for the gig bag. The bag is about the equivalent to a thin travel bag for clothing, but the quality of the guitar alone is worth the price.! Amp is decent for it's size and does the job. My only complaint is the finish on the guitar itself is a little lacking. On the one I received, the rossett around the sound hole was not lined up before the final clear coat was applied(refer to photo). For a Chinese knock off you can't be the price though! This is still a quality instrument! I've been playing for over 27 years and I would recommend this guitar for beginners and seasoned musicians alike. $123 for the guitar itself is well worth the price!

The process of building our kit guitars and basses is straight forward and requires little experience in woodworking or in instrument building. The entire instrument can be assembled with a few simple tools. Setting the instrument up for your playing style is also straightforward. We will guide you though the basic process in our instruction manual. For more complex or particular setup requirements, we suggest that you work with a professional for setup - just as you would with any instrument that you purchase.
This brings us to the end of the list of best electric guitars in India. Yamaha Pacifica PAC012 Electric Guitar is our top pick because it is a versatile instrument that can play different types of music and it comes from a reputed brand which ensures quality and playability of the guitar. In addition, it has a premium look and feel and some great features.
Les Paul, the legend, designed this guitar. This guitar has had more widespread popularity than the Strat, IMO. Jimmy Page was a huge fan of the Les Paul and the SG. Gibson made the double neck SG on special request made by Jimmy Page which was featured in the song "Stairway to Heaven" in the concert at Madison Square garden. Jeff Beck and Pete Townshend are among other notable people who use the Gibson Les Paul.
OK, I’ve put a new set of strings on now. We’re now going to carry out the following steps, just like we did in the general electric guitar setup post. 1. Check and adjust neck bow (how straight the neck is) 2. Check and adjust saddle height 3. Check and adjust the intonation (how far back or forward the saddles need to sit at the bridge to keep your guitar as in tune as possible no matter what fret you’re playing)

Body Body shape: Double cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Swamp Ash body on translucent and burst finishes, Basswood on solid finishes Body finish: Gloss Orientation: Right handed Neck Neck shape: C medium Neck wood: Hard-rock Maple Joint: Bolt-on Scale length: 25.5 in. Truss rod: Standard Neck finish: Gloss Fretboard Material: Rosewoo

This category of effects pedals does what the name implies.  It tweaks the volume of your guitar signal in some fashion.  These typically come in this spot in the pedal chain (after everything but the time-based effects) so that any change to your volume is already receiving the effects of all the pedals before it.  You’ll be altering your entire signal minus delays and reverbs.
A phaser pedal is similar to a chorus as it thickens up your sound but also adds a sweeping effect – almost as if the speaker within the amplifier is spinning around or moving up and down. If you pretend the speaker is moving away from you and moving closer and back again – you’ll get an idea as to how it sounds. You can change the length of the effect and how quickly the movements are via the pedal.
Playing Small Gigs? If you play small gigs, such as at pubs, clubs etc, small places with capacity of 200 persons or less, you won't need a massively loud amp. A 15-Watt Valve amp will be more than loud enough, such as the Fender Blues Junior or Vox AC-15. You can use louder valve amps, such as a Vox AC30 or Fender Hot Rod DeVille, but in most cases you won't need to set the volume more than halfway up (or less!) Valve amps sound louder than solid state amps, so even though a 15-watt valve amp is loud enough fro gigs, a 15-watt solid state amp will be only recommended for home practice. Good solid state amps include the Orange Crush 20 RT and Blackstar ID:30TVP 30W. Both are loud enough for mid-sized venues and sound superb.
If you're a fan of the Grateful Dead, check out the D'Angelico Premier Series DC Grateful Dead Semi-Hollow Electric Guitar. In the acoustic department, the Alvarez Artist Series AD60 dreadnought acoustic guitar comes highly rated, thanks to its hand-selected spruce top, mahogany back and sides, and powerful tone. Singer-songwriters and fans of acoustic-driven music must check out the latest Ed Sheeran Martin guitar, the comfortable, easy-to-play Divide Signature Edition Little Martin acoustic-electric.
A while back I bought a GuitarPort, a product from Line6 that was one of the earliest guitar-to-PC interfaces. It cost me $99. It connects through USB and I could plug the guitar into it. I could play amp models and effects through my PC and the sound would come out of the computer speakers. (Headphones are of course an option through the PC speakers)
The best guitars?  Look at what the best players use.  Certainly Gibson and Fender are in the mix, but these are typically priceless, early production or highly customized one-off units.  If you want something more or less off the shelf that is in the same range of build, tone and feel quality look at the following (BTW, you can't get these at Guitar Center, which is probably why they haven't been mentioned yet):

Tremolo is a regular and repetitive variation in gain for the duration of a single note, which works like an auto-volume knob; this results in a swelling or fluttering sound. This effect is very popular in psychedelic and trip-hop music. The speed and depth of the flutter are usually user-controlled.This is a volume-related effects pedal. This effect is based on one of the earliest effects that were built into guitar amplifiers. Examples include:
Acoustic guitarists can sometimes get left out in the cold when it comes to multi-effects pedals. Fortunately, the team at Boss have been listening to your requests for an innovative multi-effects pedal for acoustic guitar, and ended up creating a complete live performance option for players of all levels. In fact, they’ve crafted the best multi effects pedal for acoustic guitar that you could find in the Boss AD-10 Acoustic Guitar Effects Processor.
Other Ovation innovations include composite tops and multiple offset sound holes on guitar tops, pioneered in the Adamas model in 1977. Kaman Music has also sold budget guitars—and even mandolins and ukuleles—based on similar design principles to the Ovation such as the Korean-built Celebrity series and the Korean or Chinese-built Applause brand.[citation needed]
I’ve been looking for a long time for information on what goes on inside a typical Strat-style 5-way switch, and this site helps me understand these switches a bit more. But I still have questions, though: 1)Why is it necessary to use jumpers from one lug to another? 2)As I understand it, a 5-way switch is 2 separate 4-lug switches wired together, each with 3 input lugs and presumably 1 output lug, OR are these lugs INPUT as well as OUTPUT lugs? (I get the impression that they are dedicated to either input or output, but looking at some wiring diagrams, it appears that inputs from pickups can come from either side of the switch.) 3) Is one side the INPUT side and the other the OUTPUT side, or are both sides of the switch mirror images of one another? In other words, must the signal from the pickup enter the switch at one side, and exit the switch at the other side? It seems I can only really understand how these switches work in terms of inputs (from the pickups) and outputs (to the output jack or volume pot). Without knowing whether a certain lug is acting as an input or an output, it can be hard to understand which way the signal is travelling.
Adjusting saddle height couldn’t be easier on a Les Paul. Since the bridge can only be adjusted at each end, there is no need to adjust each saddle individually. Firstly check and, if necessary, adjust the low (thick) E string height. Do this by adjusting the height of the bridge at the thick E string end. This is done by rotating the thumbwheel anti-clockwise (counter-clockwise) to raise the bridge or clockwise to lower it. You might be able to do this with just your fingers, but chances are you will need to use pliers. Be careful if you use a tool as it is easy to slip and damage the finish on your guitar. Alternatively you can slacken all of the strings and use your fingers, although this is a very time-consuming process. Finger method
The company has been run by the Martin family throughout its history. The current chairman and CEO, C.F. ‘Chris’ Martin IV, is the great-great-great-grandson of the founder. The firm was the first to introduce many of the characteristic features of the modern flattop, steel-strung acoustic guitar. Influential innovations include the Dreadnought body style and scalloped bracing. Some time in the 1970s, Martin bought Levin guitars[1] and around 200 D-18’s were apparently built in Sweden; they are stamped LD-18[citation needed].
Rickenbacker continued to specialize in steel guitars well into the 1950s, but with the rock and roll boom they shifted towards producing standard guitars, both acoustic and electric. In 1956, Rickenbacker introduced two instruments with the “neck through body” construction that was to become a standard feature of many of the company’s products, including the Combo 400 guitar, the model 4000 bass, and, later, the 600 series.
Years ago companies used to manufacture rotating speaker cabinets (the most famous being the Leslie Rotary Speaker) – as they rotated the sound would change and develop, creating interesting modulation effects. Nowadays such things are considered too large and inconvenient to transport and use, so we have stomp boxes to help us emulate the sound. The most famous of these is the Dunlop Uni-Vibe, and although it doesn’t sound as close as other pedals to the real thing, it has become a famous sound in its own right. Rotary speaker effects often have controls for the speed of the effect, and can sometimes (such as in the case of the Uni-Vibe) be connected to expression pedals to control the speed on the fly. If you’re into 60’s psychedelic rock like Jimi Hendrix, this one’s a must.
A low latency audio card will allow to run your guitar signal (via an adapter cable or a mixer) into the PC and through the Amp Sims, (the M-Audio 2469 is a good card for this and reasonably priced), this will allow you to drive/crank the simulators as loud as you'd like to get the tone you want; and control the overall volume with your PC, good speakers/monitors are a must for this.
With the advent of belly bridges in 1931, Martin started to compensate their saddle placement. What this does is make for better string intonation. However early pyramid bridge have straight saddles, mounted 1/8" back from the front edge of the bridge. (with the center of the pin holes 3/8" from the back of the saddle.) The 1931 to 1933 belly bridges have a compensated saddle placed 1/8" from the front of the bridge on the treble side, and 3/16" from the bass side. Then on belly bridges in the mid 1930s Martin moved the bass end of the saddle back to 1/4" from the front of the bridge.
I've been a guitar player for decades but only recently became serious about working on my instruments. In my research, I’ve found hundreds of articles about instrument repair, and while many are fantastic and chock full of information that’s invaluable to musicians, a lot is impractical or requires more space or specialized tools than most of us have. Plus, some repairs, such as fretwork, nut replacement, under-saddle pickup installation and finish repairs are best left to professionals.
This is a musical problem rather than a technical one. Guitarists engage overdrive when they WANT to dominate. That's fine, but don't do it ALL the time! Not if there's an acoustic guitar in the band and you want to hear it! Everyone needs to listen, everyone has to be aware that another player may have something interesting to play, and therefore make space for it. Like turn down or - horror - even stop playing for a bit!

Effects and effects units—stompboxes in particular—have been celebrated by pop and rock musicians in album titles, songs and band names. The Big Muff, a fuzzbox manufactured by Electro-Harmonix,[49] is commemorated by the Depeche Mode song "Big Muff" and the Mudhoney EP Superfuzz Bigmuff. Nine Inch Nails, Pink Floyd, George Harrison, They Might Be Giants and Joy Division are among the many musicians who have referenced effects units in their music.[50]

I was paging through my daughter's Rolling Stone Magazine today and saw a small article with three different artists that use Harmony Guitars and they were singing their praises. I'm an old dude (or shall we say vintage)who's not familiar with all of the new bands popping up today, so I can't even tell you who these artists are. However, I did find it interesting that Rolling Stone did a spot on these guitars. I was too young to get my hands on many Harmonies when I was a kid, so I can't comment on their quality, but I know they were budget guitars and weren't considered anything special back then.

Unfortunately this guitar does not come with a solid top, but for its price you really can't expect much. Still, it is much better than what guitarists of old had to start out with! If you are looking for a beginner's guitar to test the water or if budget is limited, then you should check out the Epiphone DR-100. It currently comes in 3 colors - Ebony, Natural, and Vintage Sunburst (my personal favorite among the three). The MSRP is 182.00 but most online guitar shops sell it for $109.

Eric Johnson: highly contoured two-piece select alder body finished in a “Thinskin Nitro” lacquer, one-piece quarter-sawn maple neck with a V-shaped profile, 12″ fingerboard radius and 21 polished frets, Fender/Gotoh staggered vintage-style machine heads eliminating the need for a string tree and three special-design custom-wound single-coil pickups with countersunk mounting screws. Other features include a parchment ’57-style pickguard, five-spring vintage tremolo, silver-painted block and ’57-style string recess with no paint between the base plate and the block. Colors include White Blonde, 2-Color Sunburst, Black and Candy Apple Red. Also available as a rosewood neck version with a bound round-laminated 12″-radius rosewood fretboard, a three-ply parchment pickguard, staggered vintage-style tuners, a custom tremolo block and four brand-new finish options (including Dakota Red), three of which (Lucerne Aqua Firemist, Tropical Turquoise and Medium Palomino Metallic) are exclusive to this model.

5 Star...So fun...I bought the playstation 4 for my wife for Christmas it came with the game uncharted 4 I'm surprised my wife played it and loved it so when she seen the uncharted the Nathan drake collection it has 1 and 2 and 3 on it she had to have it she started playing it and she loves this game also...great games to have for that special moment when you are in the mood for a journey.Few games have that replay ability when you get to know Drake you just can't put it down great deal great price only problem why I gave it 4 Stars there is no incentive or discount if you have already purchased it for Ps3 and now you would want it for your Ps4 but as I said great deal great story great price
Quality-wise, they range from complete and utter crap, to OMG! Acoustics, tend to fall into the former range. Electrics, mostly the hollow bodies, were somewhat, but not always better. Solid bodies, mostly made from plywood, BUT they do have their own feel and sound. I happen to love them, others despise that cheap feel and sound. Remember, they were built to fill the growing demand of guitars, that the kids saw on tv, with the Monkee's and the Beatles
Pete Cornish (Pete Cornish Ltd.): “Compressors should be first in line from the guitar. Do not use a volume pedal first, as this will defeat any compression, and leave the system with maximum noise if the volume pedal is reduced to zero. I tend to connect any distortion devices and high-gain pedals first in line, and the lower-gain pedals later. I have found that the higher-gain devices control sustain, and the lower-gain devices control the tone if they are connected in this order. Modulation devices can come next.

It seems like Taylor have been around forever, but compared to most big name acoustic guitar brands, Taylor are a relative newcomer on the scene having been founded by Bob Taylor and Kurt Listug in 1974. They started out as an acoustic guitar company and that is their primary focus to this day and are now renowned the world over for the tone and quality of their instruments..

My Carvin SH575 is a semi-hollow body electric. The size is similar to the Gibson 336, but sounds totally different. When you play this guitar you can't put it down, Carvins are made with computer aid wood carving CNC machines the proto-type of the guitar is measured with lasers and programed into the computer so every guitar they make is to the 1000th to the original. The finish and the detail is awesome. It also is wired with hum bucking pick-ups, piezo acoustic pick-up and Roland GK synth guitar. You can get some beautiful hybrid tones from this thing and I never can stop finding new ones. Try one of these out if you ever go to California I think there is like 5 stores around the L. A. / San Diego area, you will see what I mean.
In addition to choosing between laminate and solid wood, you also have to consider the type of the tonewood. Of particular importance is the choice of top wood, because it greatly affects the resulting sound. Spruce is popularly used for the tops of acoustics because of its punchy and bright tone. Mahogany tops on the other hand is preferred for its warm tone, with more emphasis on the lower mid frequencies. There are other types of wood that fall between the two, each one bringing a subtly different flavor to the resulting sound.
For the guitarist who's frequently on the road or often plays out, the pedalboard is an indispensable aid. Many pedalboards include custom-fitted travel cases or gig bags. With your effects already mounted on the pedalboard, performance setups are fast: just unpack the already-configured board, plug in your guitar and amplifier, and you're ready to play.
wonderful feel of a small town, with caring people and the owner is amazing. He'll of a player too! Just got a gorgeous ESPN strat copy from him, he graciously showed me just how well of a strat it is... by playing it through a fender tweed tube amp. He even sang a little for me as he made my strat sing right along with him. Price was excellent, as are all his prices. See More
It goes to show…there is no “best” guitar players…it’s all a matter of perspective, taste, interpretation, etc….. Above all, much of it has to do with the players in question being at the right place , at the right time, playing what the audience wanted to hear from that performance at that point in time. It’s a big world full of talent undiscovered and sadly, it will remain just that: undiscovered.
While the combination of guitar, amp, effects and technique all play a crucial role in achieving the desired tone, it’s important to choose the right guitar for the job in the first place. There’s a reason why Stratocasters, Teles, Les Pauls and ES-335s have featured on so many classic recordings over the years; it’s because they are as reliable as they are versatile. That said, don’t be afraid to try guitars fitted with more esoteric pickups, such as Gold Foils, for a less generic sound.   P-90s are another great studio weapon; less dense than humbuckers, they can provide plenty of rhythm raunch without crowding the mix.
Musicians, audio engineers and record producers use effects units during live performances or in the studio, typically with electric guitar, bass guitar, electronic keyboard or electric piano. While guitar effects are most frequently used with electric or electronic instruments, effects can also be used with acoustic instruments, drums and vocals.[3][4]
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1377.76, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodH91419, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, usedAmount=799.99, priceVisibility=1, listPrice=999.99, usedCount=3, salePrice=999.99, isOnSale=false, showMSRP=true}

Many community, vocational or technical colleges offer technical and musical programs for those who wish to become guitar technicians. Many are instrument construction and/or repair programs. Guitar tech courses include construction, set-up, structural repair, fretwork, structural design and finishing for acoustic and electric guitars. Any courses involving musical theory and music technology may be helpful in advancing a guitar tech's career.
Compression: A "limiter" is envisioned as a circuit which prevents the output signal from exceeding a certain limit. If it did this by clipping, it would cause distortion, but if it can do it cleanly by just progressively reducing the amplification of the incoming signal, then it may properly be called a compressor. A compressor reduces the overall dynamic range by "compressing" the gain of high amplitude signals while maintaining the design gain for lower amplitude signals.
Warwick Electronics manufactured the first wah-wah pedal,[citation needed] The Clyde McCoy, in 1967 and that same year Jim Morris of Kelsey-Morris Sound developed the first octave effect, which Jimi Hendrix named "Octavio". In 1968, Univox began marketing Shin-ei's Uni-Vibe pedal, an effect designed by noted audio engineer Fumio Mieda that mimicked the odd phase shift and chorus effects of the Leslie rotating speakers used in Hammond organs. The pedals soon became favorite effects of guitarists Jimi Hendrix and Robin Trower. Upon first hearing the Octavia, Hendrix allegedly rushed back to the studio and immediately used it to record the guitar solos on "Purple Haze" and "Fire".[43] In 1976, Roland subsidiary Boss Corporation released the CE-1 Chorus Ensemble, the first chorus pedal, created by taking a chorus circuit from an amplifier and putting it into a stompbox.[44] By the mid-1970s a variety of solid-state effects pedals including flangers, chorus pedals, ring modulators and phase shifters were available.[45][46]
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
Standard Series :[1] Brown Sunburst, Black, Arctic White, Lake Placid Blue, Candy Apple Red, Midnight Wine, Copper Metallic SunburstAmerican Standard Series (as of 2012):[1]Black, 3-Color Sunburst, Olympic White, Jade Green Pearl, Charcoal Frost Metallic, Candy Cola, Mystic Red, Mystic Blue (alder), Sienna Sunburst (ash)American Special Series (as of 2010): 3-Color Sunburst, 2-Color Sunburst, Black, Candy Apple Red, Olympic White, Surf Green
Harmony was the largest US guitar manufacturer between the 1930s and late 1960s. At the height of the guitar boom in the mid-1960s, Harmony was building more than 1000 instruments per day. Not only were they producing Harmony-branded guitars, there was a time when the Chicago-based factory was making guitars for 57 different brand names and trademarks. At one point, Harmony was selling 40 percent of their guitars through Sears & Roebuck under the Silvertone brand.

The Epiphone Dove Pro is such a good guitar that it’s going to be a contender for a top pick in pretty much any list, but in this one we’ve given it the title of best value electric acoustic. You can spend a lot more money and not get much more guitar, and you can even spend more money and not get a guitar as good. The Dove Pro is that accomplished.

PRS SE Standard 24 Electric Guitar The PRS SE Standard 24 is a great first or backup electric guitar. This is a reliable workhorse that more than delivers in design, build, playing comfort and overall sonic performance. It can also be your only electric guitar, but chances are you’ll want another one along the way and give in to another model - or another SE Standard 24.
Amazing unit! I loved using my POD XT Live for years and wanted to upgrade. This unit totally exceeded my expectations. Sounds amazing and it's incredibly flexible for routing processing and effects chains. They built the hardware better and it's got a better set of pedal buttons too. Absolutely recommend! (Plus, they announced at NAMM that there will be more model packs, so that's great too!)
Of course, the big news was the introduction of the Spectrum 5. This had a slim, highly contoured body with a pointed upper horn pointing up and a hooked lower horn. The body featured a German carve relief along the edge. The head was the new hooked kind from ’64-65, while inlays were triangular “picks,” sort of like Kays of the time. Pickguards were two-part plastic covering the entire area under the strings, with volume and tone controls and stereo and mono jacks. The “vegematic” push-buttons came in five groovy colors.
The bass guitar has a long neck (scale-length) and thick strings. The open strings of the bass guitar corresponds to the four lowest strings of the guitar and are pitched an octave lower. The standard bass has four strings though five and six string basses are available which extends the range of the instrument. Though the bass guitar is the bass instrument of the guitar family and the double-bass is the bass instrument of the orchestral string family their similar roles have drawn bass players to both instruments.
A. Musical instruments, especially acoustic and electric guitars, are routinely pawned for short-term loans. Buyers prepared to pay cash can sometimes find high-quality acoustic guitars at pawn shops, but there are no guarantees on condition. Furthermore, the seller may or may not be able to provide any technical information or additional accessories.
I have owned a lot of amps over the years. I am also a dealer in music accessories. Please note that we do not sell these amps, so I am not endorsing and using something my shop sells. I recently have bought a couple of amps in a series (I bought one first and then bought another) and have been really impressed. The Vox AV series.

Acoustic amplifiers produce an uncolored, "acoustic" sound when used with acoustic instruments with built-in transducer pickups or microphones. The amplifiers often come with a simple mixer, so that the signals from a pickup and condenser microphone can be blended. Since the early 2000s, it has become increasingly common for acoustic amplifiers to provide a range of digital effects, such as reverb and compression. As well, these amplifiers often contain feedback-suppressing devices, such as notch filters or parametric equalizers.[22]

As mentioned earlier, technically, magnetic pickups are small magnets with fine wire coils. These small magnets produce a magnetic field around them. When the metal strings of the guitar are strung by the user, a vibrating motion is generated inside this magnetic field which changes the magnetic flux of the field. According to the law of electromagnetism, this change in the magnetic flux produces an electric charge in the wire coil around the magnet.
If ever there was a candidate for compression, bass is it. This instrument has a wide dynamic range (even more so when slap techniques are employed), but it usually needs to sit at a very steady level in the mix. But should compression be applied during recording, to control the levels going down, or later, during the mix, to insure the best blend in the track? Well, the answer is probably both, but with potentially different approaches to squashing the signal. During recording, a Limiter might be the ticket, to control transient peaks that might overload ADCs, producing pops and spikes that can ruin a take. A classic fast VCA compressor/limiter (like the dbx 160) could be employed to handle peaks, without really reducing the player’s dynamics at this early stage. Then when mixdown rolls around, more gentle compression can be introduced (like the smooth squash of an optical compressor like the LA-2A), to tighten up the dynamics, as needed for that particular mix. Applying the right kind, and amount, of compression/limiting at all stages will assure you get nice clean recordings, that can be properly squeezed into the mix when the time comes. 
Overall, the reviews and comparison should not be the criteria on which you should decide the brand that you want. The best way to choose one is by listening to and feeling the sound that the guitar produces. The brands listed above are some of the best-known in the world. Of course, there are many other good brands out there too. If you feel we've missed out on some, please feel free to mention them in the comments section below.
The MC5 were the nexus where radical politics and proto-punk belligerence first came together. This dangerous mixture touched off an explosion that’s still rocking the world today. The group burst out of Detroit in the cataclysmic year of 1969, with its roots firmly planted in mid-Sixties garage rock, and mutated by injections of inner-city R&B and free-jazz mayhem.
Choosing an electric guitar that addresses these preferences helps guarantee that new players will stay motivated as they learn to play. Musician’s Friend offers a wide selection of ¾-scale, mini, and travel guitars that are ideal for smaller, younger players. Full-sized electric guitar bodies vary considerably in size and weight, and those factors should be considered.
Thanks to the built-in pickup system, you can amplify your acoustic guitar by simply plugging it in, without having to perform any installation or tweaking beforehand. This bundle gives you a reliable 10-watt amplifier for electric performances, a digital clip-on tuner to keep your guitar in tune, a gig bag for safe transportation, a truss rod, extra picks and strings, and a strap.
{ "thumbImageID": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000", "defaultDisplayName": "Yamaha Billy Sheehan Signature Attitude 3 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51308847077862", "price": "2,599.99", "regularPrice": "2,599.99", "msrpPrice": "4,600.00", "priceVisibility": "1", "skuUrl": "/Yamaha/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black-1308847077862.gc", "skuImageId": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black/H75903000001000", "brandName": "Yamaha", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Blue", "sku": "sku:site51308847077871", "price": "2,599.99", "regularPrice": "2,599.99", "msrpPrice": "4,600.00", "priceVisibility": "1", "skuUrl": "/Yamaha/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue-1308847077871.gc", "skuImageId": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
There's more to being a musician than what you do on the stage: while that's the perfect place to turn it up loud with a standard guitar amplifier, sometimes you don't want anybody but yourself to be listening in on the tunes. That's when headphone guitar amps come in handy. There's a solid variety of these little amps to choose from, so you can get yours with as few or as many features as you like. Then, all you need is your favorite set of 'phones and you're ready to rock.
Ovation acoustic-electric guitars are unique, innovative and, for some players, almost addictive! Once you’ve played an Ovation, no other guitar may do. They have a different look and feel than most other acoustic guitars due to their design, which incorporates a wood top with a rounded, synthetic bowl shape instead of the traditional back and sides.

As technology for manipulating VSTs improves - such as piano roll editors replacing step sequencers and more advanced GUI's allowing faster access to more expressive voicing collections -- and as increased processing power eventually paves the way for simulated rather than sampled guitar sounds -- guitar VSTs will inevitably play an ever increasing role in music production and musical enjoyment. They will never be guitars, never offer the original expressive inspiration of a guitar strapped over the shoulder, powering a wall of sound or launching delicately nuanced resonances through waves of wood-fired warmth in the serene, silent air of a snow-covered mountain cabin, but it's a safe bet guitar VSTs will become just as much a force in music as pitch correction and lip syncing have become major players in the large-venue live performance business -- and in amateur musicians' collections of creative panacea for the stress and toil of daily life.
If you’re a beginner, you may still be in the process of exploring different playing styles or developing your own. In this case, it’s best to go for a versatile guitar that can accommodate a variety of acoustic playing styles. Fortunately, the guitars on this list are also versatile players. Some, however, may cater to a more specific style. For instance, the Taylor 214ce’s bright sound and the Seagull Maritime’s wider nut make these models great for those who do a lot of fingerstyle playing.
Over the years, many guitarists have made the Telecaster their signature instrument. In the early days, country session musicians were drawn to this instrument designed for the “working musician”. These included The King of the Tele Roy Buchanan, Buck Owens, Guthrie Thomas, Waylon Jennings, James Burton who played with Ricky Nelson, Elvis Presley, andMerle Haggard (a Signature Telecaster model player himself). Burton’s favorite guitar was his Pink Paisley (or Paisley Red[5]) model Telecaster. Later, Danny Gatton blended diverse musical styles (including blues, rockabilly and bebop) and became known as the “telemaster”. Eric Clapton used a Telecaster during his stint with The Yardbirds, and also played a custom Telecaster fitted with Brownie‘s neck while with Blind Faith. Roy Buchanan and Albert Collins proved the Telecaster equally suited for playing the blues. Muddy Waters also consistently used the Telecaster and Mike Bloomfield also used the guitar on his earlier works. Soul sessionist Steve Cropper used a Tele with Booker T. and the M.G.’s, Sam and Dave, Otis Redding and countless other soul and blues acts.
First off, in any discussions about any effect pedals, no one is asking for or cares the slightest about the opinion of people who categorically don’t like pedals. While the Internet is a wonderful medium that expedites the broadcasting of a personal opinion (as I am doing here), I’m always curious about what motivates the person who categorically dislikes something to show up uninvited to express their feelings. Imagine you start a chat thread or post a status update or tweet with something like “Those of you who’ve seen The Avengers – how did you like Mark Ruffalo as Bruce Banner/Hulk?”. Now imagine you get a reply such as “I didn’t see The Avengers because I think movies suck. People should get back to reading books” – excuse me, but what on earth is that person contributing towards the discussion, and who the hell asked them?
Ovation acoustic-electric guitars are unique, innovative and, for some players, almost addictive! Once you’ve played an Ovation, no other guitar may do. They have a different look and feel than most other acoustic guitars due to their design, which incorporates a wood top with a rounded, synthetic bowl shape instead of the traditional back and sides.

Durability: Unlike individual stompboxes where you might use some sparingly, since your multi-effects unit contains all your effects you’ll be using it frequently. As such, it’s important that the build quality is up to par. This is where brand reputation comes into play as well, since you want the brand to stand behind their product in case anything bad happens. Rest assured the pedals we recommend in this guide are all from very reputable manufacturers with long histories of good customer support.

This guitar has a maple neck which is coated with a thin satin finish and has a C-design which is easy for beginners to handle. It features an alder solid body. The vibrato design is enhanced with the addition of block saddles for adding firmness to the tone. They also give a precise breakpoint for the strings. Speaking of pickups, the PAC 112v is equipped with a 5-way blade pickup selector. There are master tone and volume controls for the neatest output. This guitar is available in seven finishes, natural satin, old violin sunburst, raspberry red, sonic blue, black, and silver metal.

Use of a slide or bottleneck. The term slide refers to the motion of the slide against the strings, while bottleneck refers to the material originally used for such slides: the necks of glass bottles. Instead of altering the pitch of a string in the normal manner (by pressing the string against a fret), a slide is placed upon the string to vary its vibrating length and thus its pitch. The slide can be moved along the string without lifting, creating continuous transitions in pitch.