The following chart will help you choose the right sized guitar for your child. It is important to note that guitar size is only one part of making it easy for your child to play. An un-adjusted guitar will not be easy to play, even if it is the right size. Here at FirstGuitar.com, each guitar is inspected, properly adjusted and set up so that the strings are easy to press down and the notes ring clearly.
The Takamine brand helps prevent big brand manufacturers from setting their prices too high - by showing them that great guitars can be produced at reasonable prices. On top of their bang per buck reputation, Takamine is considered as the pioneer of installing built-in pickups into acoustics, something that is now a common configuration offered by majority of guitar builders. The Takamine P3NY showcases how impressive tonewoods and electronics can be implemented without ridiculously jacking up the price.
Ibanez is a Japanese guitar brand, which is established in the year 1957. They provide Acoustic, Bass Guitars and Semi-Acoustic Guitars at different price segments. The company is owned by Hoshino Gakki. Their headquarters located in Nagoya, Aichi, Japan. They also manufacture amplifiers, mandolins and effect units. They become one of the top ten best guitar brands in India. The price range starts from Rs. 13,299/- onwards (approx). For further details, visit Ibanez.com.
For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound. 
Schecter Guitar Research is a company that has really established themselves as one of the best guitar brands out there in recent years. Many of their guitars are focused on the heavy metal market, but players of any genre can find a Schecter that meets their needs. With superb craftsmanship and high-end appointments you’d expect to find on much more expensive guitars, they are also among the best values in the guitar world.
This Blackstar combo amp might be really inexpensive (under $80) but it’s not a cheap model, quality-wise. Ideal for house practice, this baby has two channels (Clean, Overdrive) and is also fit for traveling. The compactness and durability of the model are great for people who want to travel with their instrument and equipment. If you are a beginner who has long given up on looking at the best amplifiers at $100, you need to know where to compromise on an amp. And Blackstar seems to do the best job as compromising on some aspects to still deliver a good sounding amp that is not too expensive. With 10-watts (there is also a 15-watt model available), you can practice for hours on end and produce pretty crisp, versatile tone. Is it the best amplifier I have ever tried? Definitely not, but it sure is one hell of a good competitor in its price range and an amazing guitar practice amp.
In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson had developed prototype combo amps, but never them. By 1935, Electro/Rickenbacher had sold more amps and electric guitars than all the amps and electrified or electric guitars that had been made from 1928 through the end of 1934.[1]

Epiphone introduces the Les Paul Special VE (Vintage Edition) electric guitar featuring the classic Les Paul profile with a lightweight Poplar body. The Les Paul Special VE is powered by Epiphone Open Coil humbuckers and is available in beautiful “Vintage Worn” color finishes.For decades, the Les Paul Special has been one of Epiphone’s best se...  Click To Read More About This Product


: : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! Hello, The Vox "plank" guitar I had was EXACTLY like yours! I don't have it now (January,2005). I sold it on eBay this last Spring on Ebay to a collector that works at Warner Bros. studio. He bought it for $460.00 !! There were a few bidders, so I would hang on to that 1950 skiffle guitar if I were you. They are very RARE! Peace! Rory


{"id": "L21430", "skuOrProductId": "L21430", "categoryId":"site1AAG", "name":"Fullerton Standard Legacy Electric Guitar", "pageUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Fullerton-Standard-Legacy-Electric-Guitar-Graphite/L21430000001000-00-120x120.jpg", "addToCartUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"30", "inventory":"0", "brand":"G&L", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"1", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "12% in Rewards", "checksum":"581797334923", "priceVisibility": "1"}

Samick is a South Korean based musical instrument manufacturer, which was founded in 1958 by Hyo Ick Lee, with the goal of "enriching human life through music, the universal language". By the mid-1990s, they were the single largest guitar manufacturer in the world! Because they build under contract for many famous brand names, more likely than not, you've already played one of their guitars.
A rivalry sprang up between Fender and Gibson, creating some of the solid-body electrics most coveted by musicians and collectors, including the 1952 Gibson “Les Paul” model with a curved top and a combination bridge-tailpiece (the guitar was designed primarily by McCarty, with input by the famous guitarist who endorsed it), the 1954 Fender Stratocaster, and a 1958 version of the Gibson Les Paul with a new “humbucking” pickup that transmitted less background interference from electrical equipment.
• Fast Fingers: If speed’s the goal, most shred-heads prefer light gauge strings. They’re easy to bend and promote fast playing by offering less resistance to the fretting and picking hands. Since guitar strings are measured in thousandths of an inch, the typical recommended gauge for players planning to burn in standard tuning are .009s, available in every guitar shop.
Jackson is yet another brand among the best electric guitar brands satisfying the needs of metal players. In fact, around three decades ago, back in the ’80s, Jackson guitars were the favorite ones for all metal and hard rock players in the world. Even today, the legacy continues as we see these guitars trending among the fans. Notably, the models like Kelly, King V, Soloist, Dinky, and Rhoads still rule the realm of guitars for their outstanding performance and tone.
This is like an echo where the sound you play repeats either once or multiple times depending on how you set the pedal. At low repeat settings this fills up the sound which is useful if there aren’t many other musicians. With lots of repeats it sounds rhythmic and huge. This effect relies heavily on the speed of the repeats keeping time with the song tempo. With practice it’s easy to set correctly but get it wrong and it can sound like your chords are running away from you.

Want to write blazing leads and screaming solos? Crank the pitch bend up, use one of four vibrato modes, and shred to your heart's content. Need some ultra-chunky rhythm chugs? S2 features both single-note and powerchord palm mutes with up to 5 layers and 8 variations each, offering superior realism and maximum options. While it excels at rock & metal playing (both lead and rhythm alike), it is also well-suited for many other genres thanks to its clean tone and huge range.
During the 1960s, many musicians[who?] preferred Martin guitars built beforeWorld War II to more recent guitars of the same model. The pre-War guitars were believed[citation needed] to have internal bracing carved more skillfully than later instruments, producing better resonance, and tops made from Adirondack red spruce rather than Sitka spruce. Additionally, 1970s Martin dreadnoughts suffered from poor intonation in the higher registers[citation needed]. Some luthiers and repairmen[who?] attribute this to a gradual trend of misplacing the bridge on these guitars: the same jigs for bridge placement were used throughout the history of each model’s production. As the amount of production increased from the Martin factory, the jigs eroded, resulting in inaccurate bridge placement[citation needed]. This was eventually identified and corrected.
As the author of the article, I don’t use an Axe-Fx, but a $250 Fly Rig. But if I want to talk to an expert on modeling, I wanted to ask the company that knows it best. Sure, you have to take in to consideration a PA, but you have to do that if you own an amp too, since proper sound sends keeps the volume lower on stage to send everything through the PA.

In the early 1980s Collings decided to move to San Diego, California but never made it further than Austin, Texas.[3][4] He started out sharing work space with fellow luthiers Tom Ellis, a builder of mandolins, and Mike Stevens. A few years later he decided to continue on his own and take the craft more seriously, moving into a one-stall garage shop.
Lee Ranaldo of Sonic Youth used a Kent Polaris I solid body (with lots of duct tape on it) and several Kent 800-series guitars - a white 820 and a sunburst 821 12-string with 10 strings on it, shown at left. Since the B and high-E strings on a 12-string set are normally tuned to the same note, he left the duplicate strings off. He uses several alternate tunings with his guitars.
At first this may seem trivial, but a little experimentation reveals that each effect reacts very differently depending on how the original signal has been altered by previous effects in the signal chain. Initially, this can seem rather frustrating; a pedal that sounds awesome on its own can turn your sound into a real mess when combined thoughtlessly with other effects. I’m going to go into the basics of signal flow and cover the fundamentals of setting up a great sounding pedal board. As you would expect, there isn’t any one “correct” way of doing things. You may find that changing the order gives you a completely unique sound, and that’s great. However, if you’re sorting it all out for the first time, this is a good way to start ordering your pedalboard.
The Effect: Vibrato effect, often mistaken for a tremolo, is the type of guitar effect that alters the pitch of your signal. The result is very similar to that which you get when you operate the tremolo bar on your guitar. There are different types of vibratos out there, but the most common division is between analog and digital units. Analog vibratos are known for their clarity and organic feel that comes from analog pitch shifting.
The history of Electric Guitars is summarized by Guitar World magazine, and the earliest electric guitar on their top 10 list is the Ro-Pat-In Electro A-25 "Frying Pan" (1932) described as 'The first-fully functioning solid-body electric guitar to be manufactured and sold'.[31] The most recent electric guitar on this list is the Ibanez Jem (1987) which featured '24 frets', 'an impossibly thin neck' and was 'designed to be the ultimate shredder machine'. Numerous other important electric guitars are on the list including Gibson ES-150 (1936), Fender Telecaster (1951), Gibson Les Paul (1952), Gretsch 6128 Duo Jet (1953), Fender Stratocaster (1954), Rickenbacker 360/12 (1964), Van Halen Frankenstein (1975), Paul Reed Smith Custom (1985) many of these guitars were 'successors' to earlier designs.[31] Electric Guitar designs eventually became culturally important and visually iconic, with various model companies selling miniature model versions[32][33] of particularly famous electric guitars, for example the Gibson SG used by Angus Young from the group AC/DC.
The Axe-Fx II is also the world’s most powerful hardware multi-effects. To use it with an amp, just create presets with no AMP or CAB blocks. Some people run separate chains of effects —some before the amp and others in its loop. This is called the “four cable method.” Or better still: match the sound of your amp and send THAT to front of house while you use your amp on stage in all its glory.

When I was a kid in the 60s, all of the Japanese brands (probably ALL made by Teisco) had a really bad rap and only kids ended up with them. Some were very cheaply made, with weak metal, thin chrome plating, funky finishes and thin pickups. I owned a Rodeo, which was terrible. But then, who knew much about guitars then? Nowdays, anything has character.
Still in the line in ’41 was the Supro Amplifier No. 50, now also called the Supreme. This had been given an updated look, with rounded corners on the cabinet and a slight narrowing taper toward the top. It still had the round grill with two horizontal bars. It was now covered in tweed, with a tweedy grillcloth, and a flat leather handle. The oval logo plate still graced the upper left corner. The back exposed the chassis, with twin inputs and volume control on the bottom. It still had five tubes, 12 watts and a 10″ speaker. In April of 1942 the Supreme amp cost $76.50. This amp would make it all the way to the proverbial end of the line.
To answer your question directly, yes, but only from a strictly physical point of view. According to guitar enthusiasts, electric units are easier to handle than their counterparts. The main motif for this has to do with the fact that the acoustic models come equipped with what many describe as heavier gauge strings. Because of this feature, their strings are more difficult to pick and press down.
Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
While a straight DI approach can work for clean sounds, simply plugging a guitar into an overdrive pedal and then routing the output of the pedal into your recording system will sound unnaturally thin and raspy because there are no speakers to take away the unwanted high end, but that hasn't stopped some people using it as a 'trademark' sound! For a more conventional sound, a speaker simulator is needed to filter out the unwanted higher harmonics. A passive speaker simulator, such as the original Palmer Junction box can be placed directly after an overdrive pedal or a regular guitar amp preamp output, but it will need to be recorded using a mic input rather than a line input (passive filtering always results in a reduction in level). Active equivalents (usually battery or phantom powered) are also available, which may offer a greater range of tonalities.
Equalizer: An equalizer is a set of linear filters that strengthen ("boost") or weaken ("cut") specific frequency regions. While basic home stereos often have equalizers for two bands, to adjust bass and treble, professional graphic equalizers offer much more targeted control over the audio frequency spectrum.[64] Audio engineers use highly sophisticated equalizers to eliminate unwanted sounds, make an instrument or voice more prominent, and enhance particular aspects of an instrument's tone.[65]
Paint chips and cracked binding: Common on older instruments. Over time these openings will collect sweat, polish, and dirt, causing discoloration, lifting of the edges, and further deterioration. It is best to clean these spots w/ naptha (lighter fluid)or alchohol, remove any loose edges around the chips before cleaning (they will be holding polish and grime preventing the glue from working), then seal the chips and cracks with thin superglue. Super glue can be heated in the microwave for a few seconds (plastic bottles) to make it flow better. Drop Filling is a technique for filling chips with paint. This is covered at the ReRanch site.

The Orange Crush is all about style and portability. It’s distictive look is due to the Orange basket weave Tolex, woven speaker grille, beading and legendary hieroglyphs (PiX) and of course the Orange signature ‘picture frame’ edging. It’s not as feature rich as other models, but that’s the point. It’s simple, portable and just a good basic combo amp. It’s also available in black (why?) and retails for around $99.
i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.

When connecting more than one pickup, it’s important to follow the manufacturer’s color codes and wiring diagrams so that the phase relationship is correct. The phase relationship of a pickup is determined by the winding direction of the coil and the polarity of the magnets. The two coils of the traditional humbucker are connected in series with the phase relationship shown in Fig. 1. Most modern Stratocaster® style guitars with three single-coil pickups are supplied with a reverse wound/reverse polarity middle pickup for a parallel hum canceling effect when the guitar is switched to a two pickup position (e.g. neck & middle pickup together) as shown in Fig. 2.


Played by Jimi Hendrix, Eric Clapton and Pete Townshend—among countless other electric guitar innovators—the 1959 Super Lead helped shape rock and roll as we know it. Introduced in 1965 (1959 has nothing to do with its year of release), the amplifier included four inputs, two channels, 100 watts of searing power and a Plexiglas faceplate (hence “Plexi”). Matched with 4x12 cabinets, the 1959 Super Lead helped to popularize the “Marshall stack.” The amplifier can be famously seen being played by Jimi Hendrix at Woodstock. It’s been highly sought after ever since.
These are the most versatile 5 position switches around. They have 4 poles, each pole has one common and 5 switched terminal which makes a total of 24 terminals. With that many connections you can wire pretty much any pickup combination you can imagine. Poles are mounted on two wafers, two poles each. Common terminals are usually the outer two terminals on each wafer. Image below shows multipole switch, two poles on the front wafer are outlined with different colors.
I got this one because my 18-year-old Takamine G-series has some serious fret wear, and a slightly warped neck, even with the truss rod maxed out, and will cost more to repair/refurbish than this one cost outright. Hence, the action is quite high, and it's hard to play bar chords higher than the 3rd fret, and there's some noticeable buzz and rattle unless I hold my mouth just right...
On August 21, 1965, during a Beatles concert tour, Randy Resnick of B-Sharp, aMinnesota music store, presented Harrison with a second model 360/12 FG “New Style” 12-string electric guitar, distinguishable from Harrison’s first 12-string by its rounded cutaways and edges. There was a television documentary produced by KSTP TV in Minneapolis documenting this event.
On December 22, 1969, the Gibson parent company Chicago Musical Instruments was taken over by the South American brewing conglomerate ECL. Gibson remained under the control of CMI until 1974 when it became a subsidiary of Norlin Musical Instruments. Norlin Musical Instruments was a member of Norlin Industries which was named for ECL president Norton Stevens and CMI president Arnold Berlin. This began an era characterized by corporate mismanagement and decreasing product quality.
Bass cabinets are more likely to have thicker wood panels than regular electric guitar amps, and to have stronger internal bracing. These design features help to lessen the likelihood of unwanted cabinet buzzes or rattles, which are more likely with bass cabinets than electric guitar cabs because of the low-frequency sounds that bass cabs have to reproduce.
BOO TO AMAZON FOR CARRYING A MISREPRESENTED PRODUCT. Due to the description I thought we could use this for lessons. It is NOT an instrument it is a toy. It doesn't stay tuned for even a 1/2 hour lesson and the teacher won't allow him to use it for fear that it will hurt his ability to hear when a real guitar is out of tune in the future. I tried to return but they didn't respond for weeks and told me it was too late after they finally responded. The guitar has barely been used at all and won't be used since it is clearly doing more harm than good for a young musician! AMAZON you should drop this product, it is NOT what is presents itself to be!!!
The first step is to determine what’s in your pickup already. The most common magnets for humbuckers are (roughly in order of strength): alnico 2, alnico 4, alnico 5, and then various types of ceramic magnets. In simple terms, the stronger the magnet, the greater the potential output. But you can’t just look at magnetic strength alone, because stronger magnets also affect the string’s ability to sustain.
If there is one body shape out there that everyone will recognize, it is this one. In terms of finish, Fender chose a lacquer clear coat to show off the natural wood instead of their usual choice, and it looks pretty awesome (of course there's a 3 tone sunburst and olympic white too). Made of ash, this particular Strat offers a U-shaped maple neck with a maple fretboard that is bolted onto the body. In terms of pickups, we have a set of three single coils belonging to their vintage line. These come with Alnico magnets, giving you that classic tone we all love so much. The hardware follows the canon as well. Here we have Fender's well known synchronized tremolo bridge paired with a set of F tuners on the headstock.

Vox entered the "lunchbox" amp market in 2009 when it introduced the Night Train (NT15H) head. This compact, all valve amp is a 15W head with two 12AX7 preamp tubes, a pair of push-pull EL-84 valves in its power section, and a solid state rectifier. It uses a cathodyne splitter, and its power section is cathode biased. The amp is solidly constructed on a black steel chassis with a bright mirror chrome finish, diamond-perforated steel tube cage, giving it a physical appearance reminiscent of a lunchbox (some comparisons to a toaster have been made as well). The NT15H also set the cosmetic and operational template for two additional releases, also all valve heads, that book-ended its output power: the 2W Lil Night Train (NT2H) in 2010, which uses two 12AX7 preamp tubes and a 12AU7 dual triode as its power section, and the 50W Night Train 50 (NT50H) in 2011, a two channel head with four 12AX7 preamp tubes and a pair of EL-34 valves in its power section. All models feature the ability to choose between the familiar "chimey" Vox voice and a high gain voice that bypasses the EQ section, via the Bright/Thick switch. Note though that each Night Train model's feature set also provides some unique capability apart from its siblings. For example, the NT15H output power can be switched between 15W pentode and 7.5W triode modes. The NT2H provides a headphone/line out jack with on-board speaker emulation (for practice or direct recording use). Lastly, the NT50H offers two channels by adding a second,optionally foot-switchable, higher gain "Girth" channel, a "Tone Cut" control and a "Tight" switch in its master section, plus a bypassable, JFET-driven effects loop. All models were designed for use with most any 8 ohm or 16 ohm cabinet, although Vox also offers a matching cabinet (NT15H/V112NT, NT2H/V110NT, NT50H/V212NT) for each model.
{"eVar4":"shop: books sheet music and media","pageName":"[gc] shop: books sheet music and media","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media","prop1":"[gc] shop: books sheet music and media","evar51":"default: united states","prop10":"category","prop11":"books, sheet music & media","prop5":"[gc] shop: books sheet music and media","prop6":"[gc] shop: books sheet music and media","prop3":"[gc] shop: books sheet music and media","prop4":"[gc] shop: books sheet music and media","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}

Lastly, we have the M-100FM. This guitar features a body that is similar that Super Strat style Ibanez is known for, packed with a great set of pickups. This is a mid range guitar, but one that is very capable compared to its immediate competition. If you need an axe that looks good and plays good as well, ESP LTD M Series M-100FM is the ESP for you.
Alan Parsons: "I always use condenser mics on a guitar amp, never dynamics — they're too telephoney. That's an unfair expression for a very good dynamic mic, but by comparison to a condenser, you're not going to get the bottom end." While this stance is more hard-line than that of most engineers, condenser mics are, of course, regularly used for recording electric guitars. However, in practice they rarely seem to be used on their own and are very often lined up alongside the trusty SM57.
Obviously, what I've done is to give myself a choice of three different sounds--a close, ballsy sound, a mid-range room sound, and a more distant room sound. By setting all three mics up at the same time, putting them each in a different input, and assigning them all to the same track on tape, I've given myself the option of having any one of those sounds immediately available to me, or a combination of them.

The S2 Custom 24 features a mahogany body with book-matched flame maple top, that follows the same double cutaway shape and detailed arch as the original Custom 24. The guitar's mahogany neck is also not far off, being rafted from mahogany with PRS' distinctive 25" scale length. It has a 24-fret rosewood fingerboard that has a comfortably narrow nutwidth of 1.656". Finally, the S2 Custom 24 owes its voice to its dual humbucker pickups that include the S2 Vintage Bass and the S2 HFS Treble - which provide PRS' characteristically open and clear tone. You can push or pull the tone knob for single-coil tones should you need them.

The internal bracing has also been updated to a forward shifted pattern to further enhance the dynamic range of the soundboard and the guitar’s overall projection. The Taylor 214ce has a nice punchy sound and good articulation. If you need more output, just plug it in and let the onboard Expression System 2 (ES2) pickup do its job. The ES2 features a patented behind-the-saddle pickup and knobs for volume and tone, giving you total control over your tonal output.
If you stick to a simple chromatic scale (all the semitones), you also run the risk of the pitch correction moving the audio to the wrong note if the singer is more than half a semitone off pitch. A user scale, containing only the desired notes, generally works much better. Some systems also allow you to dictate the correct notes via MIDI. If the song contains sections in different keys or that use different scales, it is often simplest to split the vocal part across several tracks and then use a different pitch-corrector on every track, each one set to the appropriate scale for the section being processed.
Gibson has issued two Signature Les Paul guitars for Joe Perry of Aerosmith. The first was developed in the 1990s and was customized with an active mid-boost control, black chrome hardware, and a translucent black finish. It was replaced in 2004 by a second, more visually distinctive Les Paul, the Joe Perry Boneyard Les Paul. This guitar is characterized by Perry’s custom “Boneyard” logo on the headstock and a figured maple top with a green tiger finish, and is available with either a stopbar tailpiece or a Bigsby tailpiece; Perry typically uses a Bigsby-equipped Boneyard model in Aerosmith and solo live shows.
There are two main types of pickups: single coil and humbuckers (also called double coil). Single coil pickups are comprised of a single wire coil and represent the simplest form of pickup technology. Single coils produce a bright, punchy sound, with the drawback that they tend to produce a lot of noise in form of a hum. (One way to combat this is the P90 pickup, which uses a single coil that is wider than the traditional single coil, increasing the amount of area of the strings that the pickup can hear. The result is a bigger, duller sound than the traditional single coil.) The other main type of pickup is the dual coil or humbucker, which is said to “buck the hum” common in single coil pickups. The design is essentially two single coil pickups grouped together, which creates a more powerful, richer tone that is free of extra noise. While it may seem like the humbuckers are the no-brainer option, plenty of players prefer single coils due to their brighter, punchier tone.
Some bridges allow players to introduce vibrato into their performance by means of moving a vibrato arm (aka a whammy bar) that moves the bridge up or down. Bridges with this function are often called tremolos. (Note that this is musically incorrect since tremolo means a repeating variation in volume, not pitch, but has been used so long it is accepted terminology.) A tremolo system allows the player to rock the bridge back and forth to adjust the pitch of the notes being played. This is called a floating bridge, and is popular on many guitars. For beginners, it may be better to avoid a locking tuning system for their first guitar. They can be tricky to adjust properly, and can make even a simple string change frustrating for the inexperienced. However, if your budding Steve Vai has his heart set, don’t let that stand in the way.
Because each of these requires duplicating your signal once or several times, you want to do it after you've added all of the other dynamic, filter-based, and gain effects. There is no sense in trying to get a distortion or equalizer pedal to react to a series of recombined signals when you can take care of that before hand. You'll get much higher quality and accurate modulation out of it this way.

Wouldn't it be great if you could determine what price constitutes a "fair deal" before you made a deal? We think so. That's why we've created iGuide's Real Market Data (RMD) pricing, our proprietary system that does the research for you. It's a guide that gives you updated information on what you should pay for an item or what you should expect to receive - without having to spend hours researching. iGuide's Real Market Data pricing system is the internet's best guide to market value pricing and the only pricing system designed with the consumer in mind. Our exclusive RMD pricing is based on real sales data, gathered from auction sites in near real-time. This ensures you get the most accurate pricing available, as quickly as possible!


This is worse than the Rolling Stones magazine’s list. Paco De Lucia, Django Reinhardt, Andres Segovia, Sabicas, Wes Montgomery, Joe Pass, Jeff Beck, David Gilmour, Jimi Hendrix, John Williams (no, not the movie score composer) IMO the top ten. It’s much harder to play jazz, flamenco, and sometimes classical, than it is to play blues or rock. These guitarists are all infinitely greater than Jack White, John Frusciante, Tom Morello, or John Mayor.
Next, you will need to adjust the intonation. In this case, the technique is pretty much the same. You will need a small Phillips screwdriver. On the tailpiece side of the bridge in the first case, or the rear of the bridge in the second, there are screws holding the string saddles in place. Check each note by striking the string at the twelfth fret fretted and then unfretted. The unfretted note is the proper one; turn the screws either clockwise or counter-clockwise until the notes match.
Getting the right amp for your acoustic electric guitar is definitely something you want to think about. You can have a guitar that sounds stunning when plugged in, but not so much when playing acoustically. Reversely, you can also have a guitar that sounds absolutely beautiful acoustically, but sounds like a tin can when plugged in. Sometimes, this is just due to plugging into the wrong amp.
Phaser – A frequency-based effect that makes a swirling, swooshing filtered guitar tone. Phasers use the principle of “phase” cancellation in which a filter passes over your guitar tone flipping the waveform at specific frequencies. This signal is then combined with your original guitar tone to give the iconic phaser effect used in songs by Van Halen, Pink Floyd and Smashing Pumpkins to name a few.
• Similarly, insert the Soft Clipper into the third insert slot and click on its Edit button. For settings, try putting the Input at ‑0.0, Mix at 55, 0.0, Second at 100, and Third at 57. As with the Compressor, set the output to a high level, again stopping short of distortion. These settings are intended to get you started; you may want to tweak them depending on your guitar, pickup, playing style, and so on.

This guitar comes with a 25.5-inch scale, 20 frets, and a 1.68-inch nut. The rosewood bridge features a compensated saddle for a smoother tone and warmer sound. The mahogany SlimTaper D profile neck makes it easy to play even if you’re a beginner, while the Grover machine heads will ensure your guitar stays well-tuned for an accurate musical performance.
  Korg SDD3000 Preamp Clone Great project! Since I finished it, it become one of my always on pedal! With a extremely subtle compression... Eclipse Device-2   DOPAMINE OVERDRIVE based on the Klon Centaur circuit. Materials: 01. Xicon 1% metal film resistors. 02. Kemet 5% MLCC (C0G) 03. WIMA Box Film... Refractor Black Octopus Pedalworx More build reports

This may be the most important piece of equipment you will buy if you are a beginner in terms of learning leads or just learning how to layer multiple guitars into a single song. There are certainly better boxes out there but not at this price point. The looper alone makes it worth the cost, especially since it allows you to layer on drums, basic guitar part and then leads or harmonies. Or all of the above. The only real shortcoming is the 30-second limit on the looper. But that's more than enough room to lay down a chord progression against which you can practice your leads.

Fender made some pretty big waves when they announced their latest line of Mustang amplifiers – primarily because of their sound-shaping abilities. You see, the brand’s modeling amp line has 17 preprogrammed amp models to choose from, as well as an auxiliary input so you can play along to your favorite tunes, and a wealth of included effects. The real highlights of this particular amp, however, can be found outside of the amp itself. You see, it includes a smartphone app that will let you shape the sound of the amp easily and remotely. Better still, the amp comes with its own recording software, so you can capture your songs at your leisure. For something so inexpensive, this amp packs a serious wallop.
Reverb is one of the most fundamental effects for electric guitar, which is why it is already built into most amps. Reverb adds natural sounding depth to your sound. Used extensively in the recording world, electric guitars do not sound “right” without it. Just a little makes the guitar have more of a natural sound and decay, but you can go to the extremes and get cavernous depth to your sound. Plate and spring are the most common types, but with so many makers coming up with new sonic “spaces” to play in, finding your reverb sound is a priority.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Hauptfeder Anschlag Tremoloblock Anschlagstab Bei richtig gestimmter Gitarre stellen Sie die Hauptfeder ein, um sicherzustellen, dass Anschlagstab den Tremoloblock und Anschlag berührt. Wenn der Anschlagstab nicht den Tremoloblock und Anschlag berührt, stellen Sie die Hauptfeder- Einstellschraube ein, bis Kontakt hergestellt ist.
Re-amping a DI'd keyboard or bass can really liven up a sound, but if you don't have access to a nice amp or amp modeller, you can simulate the effect by sending the audio to a bus with a delay plug-in set to a short delay time and with the wet signal set to 100 percent and dry to 0 percent. Then send the bus's output to another bus with a distortion (or better still, a guitar amplifier emulator) plug-in inserted. This simulates the delay you get from miking up a speaker, and if you blend this in with the DI'd sound, it can give the recording a live feel — especially if you use a convolution reverb to add some 'room' ambience. You may also want to roll off the very low and high frequencies to help get rid of that DI'd vibe. Nicholas Rowland
For several years now Godin have been producing some of the most sonically versatile guitars available with their combination of regular pickups, piezo pickups and synth pickups built into their higher end guitars. Note that the synth pickups are 13-Pin and compatible with the Roland GR series guitar synths - if you want MIDI you have to first plug into a Roland synth then take the MIDI out from the synth.
{ "thumbImageID": "A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000", "defaultDisplayName": "Hohner A+ AS355CE Solid Top Cutaway Dreadnought Acoustic-Electric Guitar With Gig Bag", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000205693", "price": "339.99", "regularPrice": "339.99", "msrpPrice": "339.99", "priceVisibility": "1", "skuUrl": "/Hohner/A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst-1500000205693.gc", "skuImageId": "A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000", "brandName": "Hohner", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000-00-60x60.jpg", "imgAlt": "" } ] }
Which is what you’ll be doing with the Omen-6: laying down heavy riffs and unleashing screaming solos. Two overwound Diamond Plus humbuckers are responsible for the guitar’s hot and thick output, while a thin “C”-shaped neck, 14-inch fretboard radius and extra jumbo frets keep things fast and comfy. Although this doesn’t have a tremolo for those dive bombs, a Tune-o-matic bridge and string-through body ensure your sustain will sing for days.

Variable caps used for radio tuning have about 1000 times smaller capacitance than needed for guitar tone controls. The advantage of a variable cap, could one be made in the right range for guitar, or those many-caps-on-a-rotary-switch, is that the resonant peak is maintained regardless of setting. With Joe’s “cap fader”, that peak gets flattened out in the middle of the pot rotation. Doesn’t mean it’s a bad sound, but certainly different.


I bought my first guitar several years ago and I’ve been happy with the purchase. But recently I’ve thought about buying a used guitar if I happen to find a good guitar at a bargain at a music store or pawn shop. I like the advice you gave for buying a used guitar: that I should stick with well-known brands and inspect the fret boards, neck, and other parts for needed repair. I’ll keep these tips in mind the next time I visit a guitar shop.
To understand the difference between parallel and series wiring of two pickups, check out the two diagrams. In the first, the two pickups are wired in parallel, so both pickups’ inputs and outputs are connected together. This is one of the main reasons why a Strat usually has a very bright tone—parallel wiring allows the signal from each pickup to reach the output jack by the shortest possible route. The result is that the high frequencies reach the output jack almost unchecked, giving your Strat that sparkling sound we all love so much.
Welcome to the gallery of Silvertone guitars from the VintageSilvertones.com collection! The instruments are listed in chronological order from left (oldest) to right (more recent). The gallery will continue to grow as we get more Silvertones. The purpose of this gallery is to help identify all the Vintage Silvertone guitars from the 1950's through the early 1970's. We're major fan of Silvertones and have discovered that there's a lot of misinformation out there.

Finally, if you’ve been looking around at different instruments you may have noticed some really cheap guitars by brand names you’ve never heard of. I always recommend starting out on a quality guitar made by a company you can trust. However, I’m also not going to look down on anyone who has to get something less expensive because it is all they can afford.
That’s not an overstatement, as traces of T-Bone’s influence can be heard in the early recordings of Albert, B.B. and Freddie King, Muddy Waters, and especially Chuck Berry, who adopted many of Walker’s signature licks as his own. A sharp-dressed, flamboyant performer who played the guitar behind his head and did the splits without missing a note, Walker helped reposition the guitar player from the sidelines to center stage, inspiring Buddy Guy, Jimi Hendrix and Stevie Ray Vaughan to copy his impossible-to-ignore moves.
Sometimes a guitar cab gets mic'd up differently night to night, plus every voice is unique, and every snare drum "speaks" differently (just ask a drummer). All of these minute changes and differences can and will affect the EQ decisions you'll have to make. This is why I'm such a strong believer in ear training and learning how certain parts of the frequency spectrum present themselves outside of their source-specific applications. That being said, these tips can be helpful as a place to start your search, but are not gospel by any means. So without further adieu, let's begin.

The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.
The best ones are the ones that sound good to YOU and inspire YOU to play better, no matter how old they are, what’s in them or how many features they do or don't have. It follows that there are thousands of possible “best” amps from any number of brands, from old to brand new, that can fit this description. You just have to find the right one that fits your particular needs. Brand names don't matter so much as features here, so that’s why I'm not going to mention them specifically.
The first electric instrument amplifiers were not intended for electric guitars, but were portable PA systems. These appeared in the early 1930s when the introduction of electrolytic capacitors and rectifier tubes enabled economical built-in power supplies that could plug into wall sockets. Previously, amplifiers required heavy multiple battery packs. People used these amplifiers to amplify acoustic guitar, but electronic amplification of guitar first became widely poplular in the 1930s and 1940s craze for Hawaiian music, which extensively used amplified lap steel guitars.[2]
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
Although the book contains some good information, it is not well written. In particular the use of poor grammar makes reading annoying. There is also incorrect reference to measurement units. She makes reference to measuring 1/32 or 1/64 of a millimeter. A millimeter is metric, measuring 1/32 or 1/64 are fractions of an inch, not a millimeter. I'm glad it was a free book.

The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
Not the first commercially available flanger pedal, but probably the first that really worked properly with the full sonic depth of the effect, the A/DA Flanger was made possible by the advent of the SAD1024 chip (others were used through its lifetime, depending upon availability). It hit the shelves in 1977, and was shortly followed by Electro-Harmonix’s equally beloved Electric Mistress, and MXR’s big, gray Flanger. Nearly every big maker slapped its own flanger on the butt and sent it toddling down the pike within the next few years. These were serious pedals in their day, the big boys requiring their own regulated onboard AC power stage to run all that thirsty silicon. Most required a serious investment on behalf of the impoverished guitarist, too. A/DA’s unit retailed at $199.95 when introduced, and others went for even more. Not a steal, when you consider that minimum wage was $2.30 an hour in 1977. 

First, we decided that we're going to limit this guide to floor-based multi-effects units, and we also deliberately included only those with different effect types/blocks. After looking at currently available units, we ended up adding a total of 24 multi-effects pedals to our database. All relevant reviews, ratings, forum discussions, and expert opinions were fed into the Gearank algorithm, which gave us the scores that we used to narrow down the list to just the top 10 - over 5,200 sources were analyzed during this process. We then listed each of them with important specifications and features, along with noteworthy feedback from actual users and expert reviewers. Finally, we decided to make a divide the list into two categories: compact multi-effects pedals (since many are looking for them), and medium to large size ones. For more information about this process see How Gearank Works.
Along with the options mentioned, be sure to check out overdrive pedals like the Ibanez Tube Screamer or the Boss Super OverDrive SD-1. As for distortion pedals, be on the lookout for the TC Electric Dark Matter Distortion Pedal or the MXR M75 Super Badass Pedal. Whether you're going for a heavy Sabbath-like snarl, the cutting buzzsaw tone of Johnny Ramone or Cobain's feedback-drenched squeals, the distortion and overdrive effects pedal for you is waiting in this catalog.
Chorus: Though it can be overused, light distortion works well as a filler for choruses in Christian worship and most other genres.Verse: You won’t typically hear a distorted verse, though at times a two guitar group can make this work. Generally, you’ll want to leave distortion for the higher intensity portions of a song.Bridge: A lot of Christian songs tend to lower intensity during the bridge, which means light distortion becomes a little less usable. Though for bridges that keep the tempo up, it can work pretty well.
For many guitarists, the only thing better than a Gibson Les Paul is a vintage Gibson Les Paul. From stunning museum-quality pieces from the '50s to road warrior axes from the Norlin era of Gibson production in the '70s, there are fresh Les Pauls added to this page every day including Les Paul Standards, Customs, Juniors, and more. Whether you're a veteran Gibson collector or a new inductee to the ranks of Les Paul fandom, you can find your next vintage LP here.
Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.
Learning guitar with no source material to work with will require many different resources, overlapped to fill the blindspots of each. Most people take lessons, but you’ll be at the mercy and pace of your teacher, with little room for your own interpretation. These days, there are apps and online lessons which have their advantages, certainly. They also come with monthly fees, though these will likely be cheaper than a live local instructor.
Kramer Guitars is the manufacturer of electric guitars & basses originated from America. Inearly’s off origination in 1970’s, they produced aluminum necked electric guitar& basses & in later 1980’s they started producing wooden-necked guitars catering to hard rock and heavy metal musicians. This is the brand of guitar that challenges the quality of guitars made by Gibson. Made of maple wood and aluminum inlays, this makes one of the finest make of bass and electric guitars. These are highest priced electric guitar which starts from 90,000 to 1.5lacs. These are one of the most powerful ranges of electric guitars used by professional musicians.
Open Monday-Friday from 8 a.m. to 4:30 p.m., the Visitor Center showcases a diverse selection of Taylor guitars, including standard models and seasonal limited edition offerings, for players to enjoy. To enhance the playing experience, two sound rooms are equipped with amplifiers, enabling players to plug in and play in a private environment. The Visitor Center also houses the Taylor Guitars store, where guests can purchase items including guitar parts and accessories, along with Taylor-branded clothing and other items from the company’s TaylorWare line.
Slow Gear – A dynamic effect created by BOSS that swells in volume as if you were riding the volume knob on your guitar. The effect is similar to the envelope of a violin with its ability to remove the “attack” or initial transient of the signal and produce gradual volume swells. The compact pedal version of this effect is discontinued but it is found in both the ME-80 and GT-100 multi effects pedals.
So far so obvious, right? But what's easy to miss is that this same scale shape also gives you A major and D major - they are the same chord shape, just starting on different strings. Now it's true that they're not quite the same physical shape, but that's just because of the funny little tuning 'kink' between the G and B strings (See Why is the guitar tuned like it is?). Once you iron that out, E, A and D are the same shape, as are the barre F and B chords.
This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.

This one SOLD pictured has been SOLD OUT: This is one of my favorite vintage Alvarez guitars and is always truly a very good surprise just how great these sound / impressive and I have collected more than several over the years of this very model vintage era lawsuit guitar in AMAZING Condition. Here we have a wonderful and very clean example of a Vintage Japanese Acoustic its a late 1970's great Alvarez 5056 with the most intricately detailed inlay work everywhere on the body.... the front & back in Abalone & the fingerboard is rich - dark and wavy grained it looks to be Brazilian Jacaranda Rosewood and has the Gorgeous Tree of Life in mother of pearl & abalone inlayed into the rich rosewood fingerboard WoW!,even the bridge has Mother of pearl inlaid, (you should have a real good look to come to your own conclusions if its something you like ) and the frets are in very good original condition... action is very good nice & low adjustable either way with no buzzing anywhere on the fretboard real nice playing example here folks.. The finish has a natural golden patina as seen to it and this guitar is strikingly beautiful. No cracks, no repairs, very good - excellent vintage used condition and is JVG rated at 9/10 WoW!... She's very EZ on the eyes to say the least and a premium performer this vintage piece has had over 33+ years to age and mellow and was a one owner California guitar in above better than average condition... no splits or cracks or separations or repairs ever... I believe this to be the cleanest best playing vintage 5056's we have ever had in JVG or seen for that matter. This one is a real pleasure to play! HERE IS A LINK TO CUT & PASTE TO SEE MANY MORE PICS OF THIS INSTRUMENT: https://picasaweb.google.com/gr8bids/Alvarez5059TreeofLifeVintage?authkey=Gv1sRgCNLn6LnEg8bmCQ#slideshow/5613001158042817730 .
There are several string configurations available with electric guitars, including 4-string, 6-string, 7-string, and 12-string configurations. Although each configuration can make a slightly different sound, the differences are mostly down to personal preference. Nontraditional configurations include 5-string, 8-string, 9-string, 10-string, and 18-string versions.
I use a cheap zoom effects box (actually because it has a fabulous digital tuner built-in) and if I want to play at home I plug that into the stereo. Don't have it any louder than you would a CD etc .. (ok maybe a bit ;-) ) gives you the flexibility of all the effects sounds plus because it's stereo (assuming you hve the speakers a few feet apart) you get that feeling of it being "large" when really it's not that loud.

Our list of best electric guitar brands will remain incomplete if we do not add Schecter in it. Schecter Guitar Research is a firm that evolved from a startup into a guitar giant during the recent years. Aimed mainly at the heavy metal side, Schecter produces several guitars that metal players look. However, players from all genres will find something of their wish at Schecter as it touches every side of this domain. Created with the utmost care, delicacy, and artisanship, these guitars exhibit the most amazing and high-end features that suffice to surpass most expensive brands in the market today.

I once did a setup on one that belonged to a friend but it was really wrecked so it wasn't perhaps a fair representation. It seemed to be well built though and the neck was nice enough. The tone was decent too although not exciting - exactly what you'd expect from such a guitar. Overall I'd say it was better than the cheaper squiers (SEs, Affinities etc).
You have so many effects on this that you’ll find it difficult to get bored, all of which have been modelled on some of the most iconic sounds in effects pedal history including Boss, Line 6, Electro Harmonix, Z Vex and more. You have a huge amount of distortions, delays, reverbs, modulations, pitch/synth/filters, compressors/limiters, EQs, wahs, and even a looper to sculpt your sound with, all of which have been meticulously modelled to include the subtlest qualities and sound abnormalities that made these effects and their respective pedals so revered.
I went to my local guitar store, and tested every one on the wall (under $1,000). I narrowed it down to two (the Ovation acoustic-electric of the same caliber, and this Yamaha FGX800C). In the end I ordered this guitar because of the excellent price on the "package" deal (hard case, strap, tuner, etc.). It sounds fantastic, stays in tune very well, is comfortable to play, and no "buzz". My limit of 4 stars is due to; 1) The strap is garbage...get a new one if you play with a strap. 2) The guitar only has a strap post on the rear of the instrument (it also doubles as the connection for the amplifier cord), and there is none on the front. You have to tie a string ahead of the nut. That gets in the way of the tuning and fingering of
I lost a wonderful EMPRO les paul custom model In a plain top brown finish (it was at a friends house in Dallas Texas who died in 2002 and was auctioned off before I could get down there from Michigan). It was my first electric guitar, bought at a pawn shop in Sulphur Springs, TX in 1989. I loved that guitar and have only seen about three other Empros since then. I did not see the Empro badge on this site. Anybody know the maker?
The earliest boost pedals used a germanium transistor and was often in the form of a treble booster. The most famous treble booster is the Dallas Rangemaster which is rumored to have been used by Eric Clapton on the Bluesbreakers record, often referred to as the Beano record or Beano tone. (This is because Clapton is reading a Beano comic on the record cover). At the time Eric was using a Marshall JTM45 2×12 combo (commonly referred to as the Bluesbreaker because of this recording) and a Les Paul and man does it sound good. Allegedly he was using the Rangemaster to push the front end of the amp into more distortion. This has never been confirmed to my knowledge but is the source of much Internet speculation. But I have played an old Bluesbreaker amp with a Les Paul and it sounded pretty darn close.
© 2013 Ubisoft Entertainment. All Rights Reserved. Rocksmith logo, Ubi.com, Ubisoft, and the Ubisoft logo are trademarks of Ubisoft Entertainment in the US and/or other countries. The “PS” Family logo and “PS3” are registered trademarks and the PlayStation Network logo is a trademark of Sony Computer Entertainment Inc. Software platform logo (TM and ©) EMA 2006.
My sound is pretty clean with no overdrives or distortion. Besides a tuner and a volume pedal, I use a delay and a reverb pedal (TC Electronics) and I have a freeze pedal as well (EH Superego). I’m never sure if the freeze pedal should come before or after the delay and reverb. By trying both options I can’t really hear a difference in the overall sound which I guess is fine. Any thoughts or recommendations are welcome.
There are many options in this price range that will suit the beginning player. Musician’s Friend offers an extensive selection of Electric Guitar Value Packages that include an electric guitar, amplifier, and many of the accessories mentioned above. The components in these packages have been carefully chosen to work well together and can eliminate guesswork when choosing the right gear. Many also include instructional books, DVDs, and online beginner’s lessons, plus other resources to keep the new player motivated to keep learning.
Recent amplifiers may include digital technology similar to effects pedals, up to the ability to model or emulate a variety of classic amplifiers. Some modeling systems also emulate the tonal characteristics of different speaker configurations, cabinets, and microphones. Nearly all amp and speaker cabinet modeling is done digitally, using computer techniques (e.g., Digital Signal Processing or DSP circuitry and software).
×