{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"delay & reverb effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}
Why We Liked It - Given the price, the hardware, and the attention to detail, this would undoubtedly be a contender for one of the best all-round choices on our list. There aren’t many other options that come from a premium manufacturer and give you all this for such a good price. The looks however will divide opinion. This is a must consider if they’re to your tastes however.
Now we switch gears to a company called Unicord, which was owned by Sid Hack. At some point in the early ’60s (probably in around ’64), Unicord purchased the Amplifier Corporation of America (ACA) which was located in Westbury, New York, a northern suburb of New York City. ACA made Haynes guitar amplifiers and an early distortion device powered by batteries.

We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
Also offered by Sears in ’42 was the Supro Baton Guitar Outfit, with lap and amp, except for a carved Silvertone logo on the head, identical to the Supro outfit. One other Silvertone amplifier was clearly the Supro Supreme. Another five-tube amp with a 12″ speaker was also offered, which appeared to be a Valco product, but which model is unknown. This had a cabinet covered in a “grey checked material,” and featured a round grill cut by two horizontal bars, typical of Valco designs.
Sometimes, the research we do - such as this hunt for the best multi effect pedal - opens up our world to a piece of gear we did not previously know about, and yet completely blows us out of the water. Such is the case with the Line 6 M5 Stompbox Modeler. This is the second item from Line 6 that made it into our top 5 list (the other one being the high-end POD HD500X). The Line 6 M5 is different than the other multi-effect pedals on our list, as it’s the only one that can only model one effect at a time, and also does not do amplifier modeling. With the other pedals on our list, you could replace your entire pedalboard by having multiple effects active at the same time. The M5 is far more simplistic, only letting you use one at a time. You might be asking yourself why we love it so much - well, it’s not for everyone, but there’s a lot of beauty in its simplicity. Read on to see if this is the right pedal for you.
This cutoff is based on the average used price on Reverb over the past year, and while the $1000 cutoff is relatively arbitrary, it is as good a point as any to divide between entry-level gear and more heavy artillery. Here again, we are not combining wattage and cabinet size variations on the same models, which inherently decreases the ranking of any amp series with a multitude of different configurations.
For many people, Yamaha isn’t a brand that immediately comes to mind when they hear “electric guitar.” Yamaha’s artist roster isn’t filled with many high profile endorsers nor is the Pacifica carried by the big online retailers. This is a shame and why (in my opinion) the Pacifica is one of the most underrated electric guitars available today. It’s a guitar I wish more people knew about: the PAC112V is very well made, sounds and feels great, and is suitable for a number of styles thanks to its H-S-S pickup configuration and 5-way pickup selector.
In the end I decided to go with the .033μ. Everything larger sounded too wooly to me on the neck pickup. If I didn’t play much EBow, I might even consider the .022μ. But you might make a different choice, especially if you were using brighter pickups. You won’t know for sure till you try it out with your instrument, amp, and hands, but I hope this gives you some idea of what to expect.

Bridge pins prior to 1945 did not have string slots. There is a slight seam seen in the round head (hard to see but it's there). The bridge pin round head diameter from 1931 until mid-1939 was about 0.320". In mid-1939 the round head was reduced to about 0.300", and this size was used until the unslotted pins ended in 1945. The shaft size was slightly increased at this time too. The pre-1939 style pins have a more bulbous head, where the 1939-1945 style's head is more slender. The pin taper is about 5 degrees, and the diameter under the collar is about 0.225". The pins are made of hard celluloid. Several companies have reissued these old style pins.

In terms of usage, it is quite similar to the mini Strat guitar we discussed earlier. It is a great choice for someone who just wants a cheap electric guitar for practice or someone who is an absolute beginner. Also, it is one of the best choices for five to fifteen years old kids wanting to learn guitar. It comes with small ¾ sized bodies and a 22.75inch of scale length. It has a c shaped fine maple neck with its 20fret fingerboard. 
Reverb is a more subtle form of delay that replicates the natural echo effect of various spaces, such as small, medium, or large rooms or concert halls. Many amplifiers have built-in reverb effects, but a lot of guitar players like having a separate reverb pedal for an increased range of programmable options. Some modern reverb stompboxes emulate the sound of vintage reverb devices that used reverberating springs or plates to achieve their effects. Reverb is great tool to add color to a very clean tone, but can quickly make a heavily distorted tone sound muddy.
Quartal and quintal harmonies also appear in alternate tunings. It is easier to finger the chords that are based on perfect fifths in new standard tuning than in standard tuning. New standard tuning was invented by Robert Fripp, a guitarist for King Crimson. Preferring to base chords on perfect intervals—especially octaves, fifths, and fourths—Fripp often avoids minor thirds and especially major thirds,[102] which are sharp in equal temperament tuning (in comparison to thirds in just intonation).
Dobro also sold a Dobro amplifier to accompany the Dobro All-Electric. The first Dobro amp had a large cabinet made by Bulwin of Los Angeles. The grillcover was a smaller version of the typical guitar resonator cover, provided by Rickenbacker. This had five tubes and an 8″ Lansing field coil speaker. The Lansing was probably a matter of convenience because the company was located down the street from Dobro. The rectifier tube was an 80 and the output tubes were two 42s. These apparently had two inputs, volume and an on/off switch. The chassis on these amps were supposed to have been made by Dobro itself, but more than likely they were sent out to some local L.A. radio manufacturers and assembled at Dobro.
"Our expertise is to customize guitars according to the specifications of our clients. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. Our 100% satisfaction guarantee allows you to buy with confidence!"
While most instruments made by Harmony and Kay were much cheaper than Martins, Gibsons or Fenders, the upper-level, more elaborate ones actually cost more money than some lower-end and even mid-priced Gibsons and Martins. A top-of-the-line Harmony, Kay or Silvertone made by Harmony featured inlay, binding and multiple pickups, switches and knobs, and cost more than a Les Paul Junior or Special and in some cases fully as much as a Les Paul Standard. While one of these instruments in near-perfect condition today might fetch $1,000 or more, it certainly would not have been nearly as good an investment as spending less to buy a Les Paul Junior and sure enough not as good an investment as spending an equal amount to buy an original 1959 sunburst Les Paul Standard.
The #1 cause of fret wear is the fretting hand pressure exerted by the player.  I have some clients that grip very tightly and wear frets quickly (Rob Fahey), and some that grip very lightly and take forever to exhibit significant wear (Jasan Stepp, Dog Fashion Disco/PolkaDot Cadaver).  Fret material hardness, string hardness and frequency of use all contribute to wear as well, but hand pressure is still the leading cause since frets do not wear themselves out.  Technique is different for every player, unique and personal and habits can be hard to change.  Just like brakes in a car, how hard and how much something is driven directly impacts wear and longevity.  Please see the refrets page for further thoughts on this topic.
Volume pedals are volume potientiometers set into a rocking foot treadle, so that the volume of the bass guitar can be changed by the foot. Compression pedals affect the dynamics (volume levels) of a bass signal by subtly increasing the volume of quiet notes and reducing the volume of loud notes, which smooths out or "compresses" the overall sound. Limiters, which are similar to compressors, prevent the upper volume levels (peaks) of notes from getting too loud, which can damage speakers. Noise gates remove hums and hisses that occur with distortion pedals, vintage pedals, and some electric basses.
Regarding the PDF download, I have not done so yet, but all of this info is available on the web, in color, ad nauseum. I bought the book to have at my bench so I could refer to it while wiring guitars. I do not have a color printer. I find the thought that, in order to experience what the book OUGHT to look like, you have to download a file, presumptuous, at best. Annoying, at the least.
Were its fate left to the Electric Storms, Ovation may never have made it out of the ’60s. However, the breakthrough occurred when the company picked up the endorsement of pop star Glen Campbell, who began his career as a session guitarist and folk singer, at one point touring behind Ricky Nelson. In ’65 he was a member of the Beach Boys, but by the late ’60s he had broken through to be an enormously popular balladeer with country-tinged hits like “By the Time I Get to Phoenix” and “Wichita Lineman.”

Wow! I don't even know where to begin... I am using this processor with my new Cecilio electric violin. I learned and trained on classical violin, acoustic, reading sheet music, etc, so I'm pretty new at now playing an electric one hooked up to an amplifier, and even newer at using a pedal/processor. Upon first assembly, I found that many of these effects will probably not be used in the music that I play (worship & praise - old school & contemporary), but others will be very useful to bring a new sound to old songs. Also, some of the effects sound very similar to one another. I haven't yet figured out and tried to edit and save any effects to my liking, so I can't really say how well the MG-100 does in that area. But I must say that I am absolutely in love with the drum machine ... full review
Paramount: Around 1930 Martin made about 36 guitars with strange construction. A style 2 size body mounted into a larger rim and back of rosewood, small round soundholes around a "lip" that joins the outer rims to the inner rims, no soundhole in the top, 14 frets clear, dot fingerboard inlays to the 15th fret, rounded peak peghead with standard Paramount banjo peghead inlay, banjo-style tuners, four or six strings.
Ibanez 12 string Martin style, vintage Natural High Quality Japanese Ibanez Vintage Guitar ....This example is MODEL# V302 ...And it IS ANOTHER great find this one is in a Natural finish and is a REAL GEM ta-boot and it has a Beautiful aged Premium Solid German Sitka Spruce Top, WoW! what a nice glass like original finish to this one ...again High Grade woods used on this 80's Ibanez AAA Mahogany Sides-Neck & Back "see quality og the grain in the pics" . Lots of volume & is full-and rich tone from this baby.Pics show missing string done while we were cleaning her up they just snapped ... obviously old and so this guitar will come with a brand new set of Martin strings installed for the new owner no worries..... this one is ez to play & stays in tune well. It is a crafted in Japan guitar and it compares favorably to Gibson, Guild or Martin... at a fraction of that cost. Note: we also have a Sunburst V302 in stock in our listings please see that if you prefer the guitar in sunburst. Thank you for your interest, Joe.
When making solder joints to switches and pots, the lug and wire should be heated by the tip of the iron and the solder pressed (or flowed) onto the joint. In this manner you can avoid cold solder joints as both components are properly heated prior to the application of solder. Melting solder on the tip of the iron does not insure the actual components are being heated properly.
I finally had the chance to bring my les paul for Steve to look at an annoying fret buzz. First he said the guitar is too straight and adjusted it.  Then he quickly discovered the 4th string buzz was at the first fret but it had nothing to do with the buzz because the issue was at the nut, it was cut too low!  Steve redo the string while we were chatting about how the neighborhood has changed. Within 5 mins, Steve redo the with some filling and filing and voila!! The buzz was gone.  I was so happy and asked him how much, he said it was easy so he didn't want take any money.  But i have him some coffee money and he said it was too much, I said it was for a week and he laughed.  My last issue I brought to Steve as well and we had the same conversation. I highly recommend Steve as experienced luthier and for someone who loves guitars and someone who can solve guitar problems.  Steve is a hidden gem in the Boston guitar world.
The company’s reputation and output continued to grow. Forays into mandolinmaking in the late 1890s and ukulele making in the 1920s greatly contributed to their expansion, and by 1928 they were making over 5000 instruments per year. The company remained family-owned and employed a relatively small number of highly trained craftsmen making instruments primarily by hand. By the early 1960s Martin guitars were back-ordered by as much as three years due to limited production capacity. In 1964, Martin opened a new plant that is still the primary Martin production facility.
However, Class D amplifiers (also called "switching amplifiers" or confusingly, "digital amplifiers") are more efficient than conventional Class-AB amplifiers, and so are lighter in weight and smaller. The Acoustic Image Focus head, for example, produces 800 watts of power and weighs 2.2 kilograms (about 4 pounds). Class-D amplifiers use MOSFETs (Metal Oxide Semiconductor Field Effect Transistors) rather than 'ordinary' (bipolar) transistors, and generate a pulse-width modulated signal that is filtered before it reaches the speaker.[15] In the 2010s, the availability of Class D amplifiers has enabled amp manufacturers to produce very lightweight and small, yet very powerful amp heads and small, lightweight combo amps.
Now, if you are an electric player who doesn’t like using any pedals, that’s perfectly fine. Just be honest about the reasons. If you just like the sound of your guitar and your amp, cool. If you just want to keep things simple, I understand. That’s your preference, and it doesn’t make you better in any way than someone else who does. If you’ve been a genuine listener of music, you’ve seen and heard players who’ve blown their audiences away on un-amplified classical guitars, and players who blow us away with lots of pedals on their boards.

In 1969 MCA closed the Danelectro plant. This was blamed on MCA's shift to selling instruments to individual guitar stores instead of jobbers (such as Sears). At this time, Dan Armstrong bought most of the remaining parts, and continued manufacturing Danelectros through Ampeg. These instruments had single cutaway bodies with one humbucking pickup (not lipstick tube pickups), and no brand name on the peghead. Apparently Ampeg was having problems with the production of the see-thru Dan Armstrong guitars. In the interium, Armstrong sold the remaining Danelectros through Ampeg until the Dan Armstrong guitars were fully available.
Buying a new guitar amp is easy. But, as you will have seen, ending up with the right amplifier for you isn’t as straightforward. Amps are not something you buy every day, so take your time, read our guide, use our categories and charts as inspiration, and ultimately you will find something that will suit you and your playing perfectly. Good luck in your hunt for the perfect amp!
: I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.
Frankly, learning to play a song the Rocksmith way is exhilarating. If I (Carl) had looked up the chords online, I could have played the song just as easily. But I might have stopped to scroll down on the computer screen or to relearn the first half of the song until I got it down pat. After a few progressively more difficult play-throughs on Rocksmith, I'd memorized the song without even thinking too hard about it.

Fujigen went on to achieve lasting fame as the manufacturer of Greco guitars in the ‘70s and Fender Japan in the ‘80s and early ‘90s. But Fujigen’s work in the ‘60s is our focus. The Fujigen hardware is the easiest way to tell these guitars apart from Teiscos. For example, Fujigen embossed "mic 1" and "mic 2" into their metal control plates, while Teisco did not. This is just one example, but it requires a bit of reading and studying about the nuances of that hardware to positively identify the Fujigens for what they are.
In 1958, Gibson updated the Les Paul yet again. The new model retained most of the specifications of the 1957 Goldtop, including PAF humbucker pickups, maple top, tune-o-matic bridge with a stop tailpiece or Bigsby vibrato tailpiece. The most significant change in the new models was the finish. The Goldtop color used since 1952 was replaced by the Sunburst finish already being used on Gibson’s archtop acoustic and hollow electric guitars, such as the J-45 model. To differentiate from the earlier Goldtop model, the new Les Paul was referred to as The Les Paul Standard. Original production of the standards lasted from 1958 to 1960. Only 1,700 of these early models were made and have subsequently become highly collectible.[note 6] Original production ended when, in 1961, Gibson redesigned the Les Paul to feature a “double cutaway” body, which has subsequently become the Gibson SG. Due to high demand, Gibson resumed production of Les Paul Standards in 1968. Today, the Gibson Les Paul Standard has BurstBucker pickups on the Vintage Original Spec models and Burstbucker Pro on the lower end models bearing the ‘Standard’ name.
Martin actually got into the electric guitar business in the late ’50s when it started slapping DeArmond pickups onto some of its acoustic guitars yielding the D-18E, D-28E and OO-18E. These pickups were the DeArmond humbuckers with chrome sides and a black center in a trapezoidal hole, large pole pieces along one side and smaller poles along the other. Prototypes of the D-18E began in 1958 and in 1959 production began on it plus the D-28E and OO-18E.
In 2003, The Blues, a PBS-TV series produced by famed director Martin Scorsese, traced the roots of the blues from Africa to modern day society, showing how it inspired other generations of musicians. While in production, Marshall Chess got an e-mail from Chuck D saying that he heard he was doing a film that connected the blues to hip hop and that he wanted to be part of it. Chess was happy to hear Chuck D say "Electric Mud was one of his favorite, most influential albums and that all the early hip hop guys were inspired by it," affirming a connection he thought had happened. In the episode titled Godfathers and Sons, the focus is on the Chicago blues, Chess records and the effect of Electric Mud on Public Enemy, with Chuck D coming to Chicago, led on a historic blues tour by Chess. There, Chuck D's feverant appreciation of EM got him to reassemble the musicians from the sessions to perform material from it for the upcoming 20th Anniversary Chicago Blues Festival. In keeping with the experimental vein of the record, Chuck D added a turntablist (Juice) and a rapper (Kyle Jason) to the band, re-naming the group the Electric Mudcats. Having the material played at a blues festival showed how the album had finally come full circle, from being hated to being respected and enjoyed.
The solid body guitar is a rock ‘n’ roll machine at its core, but appears in all genres of music and is more popular than hollow body or semi-hollow body guitars due to its wider variety of tones and improved volume and feedback characteristics. Some, like the Les Paul, have arched tops like hollow and semi-hollow models. But the majority are flat-bodied, including Gibson Flying Vs, Explorers and SGs, and classic Epiphones, like the Wilshire.
When you’re starting to become serious about playing the guitar, the question of “what amp should I get” is bound to pop up. There’s quite a deal of variety out there, with many brands and models, and constant innovation adding new features to choose between with each passing year. It’s enough to baffle even an intermediate player, let alone a rookie who’s just getting started. To ensure that you get the right amplifier for your needs, you’ll first need to know a bit about how the amp’s specifications translate to real life.

The Perform page allows for editing articulations, adding effects like pedals, and adjusting parameters like monophonic mode, round robin, and the special tapping mode. The Fretboard page displays parameters for the virtual guitarist, such as hand size and fret preference; these parameters are translated into real behavior for the string selection algorithm, mapping MIDI notes to frets and strings intelligently.

Taylor also has a Build-To-Order program that allows anyone to design their very own guitar. There’s an extensive menu of guitar options starting from tonewoods, including species and grades that aren’t offered through Taylor’s standard line; inlay, binding and purfling options; finish options such as solid colors, sunburst, or vintage finishes; wood accents like a backstrap, armrest or truss rod cover; neck options such as scale length and neck profiles; and finally body shapes including the deep-body Dreadnought and the new Grand Orchestra.
Jackson is a well-known guitar manufacturing company that was set up in the year 1980. Jackson guitars are considered as among the best guitars on the planet. Their guitars are known for its slender and refined layouts. Jackson guitars are also popular for their typical pointed headstock. The Jackson JS32 Kelly RW is an electric guitar which has won the hearts of many owing to its stylish design and great sound quality. When it comes to the sound quality of the guitars, Jackson is the best guitar brand to have.
Semi-hollow guitars are guitars which have an exposed opening, generally in the form of two f-holes on the top of the guitar’s body. The inner chamber of the guitar is then divided into two by a block of wood which runs through the body. A perfect representation of this type of guitar is the Gibson ES-335, which has been used at some point or another by musicians such as: Eric Clapton, Otis Rush, Warren Haynes, Dave Grohl, and B.B. King.

Schecter Guitar Research Company was founded by David Schecter in1976. This manufacturing company produces large number of electric guitars, bass guitars, and steel-string acoustic guitars, as well as offering hand-built custom instruments and a small line of guitar amplifiers. The schecter known for its schecter “c” shape body. This brand is known for its better quality of wood and handsome finishing.
Another important point I want to add here is - if you are on a budget, do take a look at models in higher price brackets. Why? The simple reason is, it will make you aware what a good guitar looks like. The expensive ones usually have better sound quality, better looks and it is more comfortable. It will help you grow along with the guitar. Always buy the higher priced guitar in the range that you can afford.
In 1951, this initial rejection became a design collaboration between the Gibson Guitar Corporation and Les Paul. It was agreed that the new Les Paul guitar was to be an expensive, well-made instrument in Gibson’s tradition.[10] Although recollections differ regarding who contributed what to the Les Paul design, it was far from a market replica of Fender models. Founded in 1902, Gibson began offering electric hollow-body guitars in the 1930s, such as the ES-150; at minimum, these hollow-body electric models provided a set of basic design cues for the new Gibson solid-body, including a more traditionally curved body shape than offered by competitor Fender, and a glued-in (“set-in“) neck, in contrast to Fender’s bolt-on neck
The solid body electric guitar is the most common body type and is made from a solid slab of wood. Solid body guitars can range from a simple, single-pickup model, to an ornately figured and decorated, multi-pickup instrument with a slew of electronic options. Although solid-body guitars don’t produce as much resonance as hollow-body models, the woods used still have an impact on the instrument’s sound.
Zen guitar is not about scales and memorizing chords. Instead, it is a masterpiece of why to play guitar, helping you get through the times where learning guitar gets frustrating, and believe me, it will at some point get frustrating. But if you can get through that and push on, you’ll be rewarded with mastery of an instrument that will give you personal fulfillment and a lifetime hobby that brings achievement and satisfaction.

Probably also new in ’39, though it could have been available as early as ’38, was the Supro No. 50 amplifier. This was a typical Supro rectangular cabinet, now with a round grillcloth broken by two horizontal strips of wood. A Supro logo plate sat on the upper left corner. It had a flat leather handle and five tubes putting out 12 watts through a 10″ speaker. There were two inputs, an on/off switch and volume control. Cost was $50.

Neither should you confuse acoustic-electric guitars with semi-acoustic hollow or semi-hollow instruments. Acoustic-electrics are acoustic guitars with onboard electronics that allows them to be amplified. They can be played just as well without plugging in. Semi-acoustics are electric guitars with some acoustic properties that are meant to be amplified when played.
Budget acoustics usually have a very high action (which may be possible for a good luthier to fix!), barre chords on acoustic guitar can be demanding and require good finger strength on a well set up guitar, on a budget thing with a high action it will be next to impossible! Cheaper acoustic guitars can be very hard to play higher up the fretboard because the strings are too far from the fretboard - if you find this, the truss rod (a thing inside the neck that controls how 'level' the neck is) can be adjusted by someone who knows what they're doing! If you can stretch to a mid-priced acoustic you should be able to get something suitable for a beginner.
“Tone that emulates the human voice is always more accessible,” Waara continues. “Otherwise, purely electronic music would have taken over, and we wouldn’t be making guitars anymore. There are some absolutes in human DNA about wanting to feel connection and that’s probably a fuller frequency tone, that’s tone that is more reminiscent of the human voice. Or, for instance, a violin or organic instruments that have been around for hundreds of years. When we talk about guitars having an organic quality, it’s because that’s rooted in what human beings know. Which is air moving, wood vibrating, people speaking.”
Another negative I found was that this book focuses more on traditional music notation, and places guitar tablature into the background. As a guitar teacher, I believe that tabs are the next best thing to sliced bread, since it makes learning soooo much easier for beginner guitarists. And since learning the guitar is hard, anything that makes it simpler is more than welcome. On the other hand, if you want to learn to read standard music notation, this will be the way to go for you.

The Dobros and Nationals were joined by the first Supro guitar versions in late 1935, even though their announcement didn’t appear until a few months later in the March, 1936, The Music Trades. These first Supro guitars included an aluminum Hawaiian lap steel, both electric Spanish archtop 6-string and tenor guitars, and an electric mandolin. They mark the official beginning of the Supro story.
{"product":{"id":"113478791","stock":"instock","price":"2099.99","name":"1967 FT90 El Dorado Acoustic Guitar","download":false,"sku_id":"113478791","checksum":"754513965000","rep_id":"site5113478791","displayId":"113478791","sku_display_id":"113478791","sku_rep_id":"site5113478791","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
If you’re into guitar and its majestic world, we strongly advise you to get your hands among the best options. That way, the musical enigma will reach its pinnacle. We here would help you around with the list of best and famous guitar brands available in the nation at present. To be fair, even the best guitarist in India uses these ones for their musical rendering.
3/4 guitars are fine for children under the age of 11, or as travel guitars, but if you want to learn properly, then buy a full-size guitar at the start. I started on a full-size classical guitar right back when I was knee-high to a grasshopper; initially, it's hard, but your fingers adapt fast enough and you will soon develop flexibility and dexterity. For children under 11, a 3/4 guitar is an option, but even then I still feel that full-size is better. Check out all the amazing 6-year-old kids playing amazing stuff on the internet, 9 times out of 10 they are playing full-size instruments.
We are very proud to present to you a pleasant surprise I must say from way back when folks this is prime Time beginning of that Golden Era of some of the GREATEST QUALITY Acoustic guitar that FENDER ever had the smarts to Import… that’s right these are Japanese crafted beauty’s . Built back in the day when Japan had the economy riding high while US guitar builders were getting bought out by business folks not guitar builders and US economy was in the tanker just a little brief history reminder… Fender & Gibson were under the gun to cut costs and re-structure if they wanted to stay alive and that they did…. CBS , Norlin…. And others cut back on the high quality woods they once enjoyed and relied upon the reputation the US had for making great guitars basically reputation from the late 50’s – early 60’s To about 68-69 or so…. Then quality went down no doubt…. Right then it was prime time for Japan Luthiers to strike and they did…they stepped up the quality from the funny toy grade guitars we saw here in the states back when I was a kid you could get a decent cute player electric guitar at the Pawn shop in about 1965 for about $69.00 in fact my dad bought my 1st electric guitar there for $69.00 … I loved it—it was a “ KENT” and it sounded very good threw my Silvertone amp….. ..Kent is a offspring of Greco which is a factory behind making many brands buildby Fujigen Gekki…. Ok what this Fender beauty traces back to the great FujiGen Gakki in 1974 according to its serial number… making this beautifully preserved SOLID TOP Vintage Japanese guitars 40 years old a true vintage guitar in its own right. It was during the time when this guitar was built that the Japanese Luthiers set out to make some of the most righteous guitars period… fit – finish - workmanship & materials used are the good stuff folks….. This full size Dreadnought Acoustic guitar is a replica of the Martin designed D-28 known to be one of the finest most prolific designs the US Martin & co ever produced. This Fender F310 is of a High Quality example, The top is Solid Spruce straight grained with some nice figure and wow it has 40 years of patina to its color and finish and overall vintage appeal is Very strong… I was drawn to this example it sounds deep and rich and complex with an excellent volume And its highs ring threw when cording and finger picking , This guitars Back & sides are true to the masterful D-28 desigh …. High quality ROSEWOOD just beautifully grained see the pics for more detail Its absolutely beautiful back – sides are all east Indian Rosewood the fingerboard may be Brazilian Rosewood by its looksa very high grade non theless, the bridge appears to be Ebony wood….. the Bridge is nice and flat to its top which is also nice and straight, action is very good medium low and adjustable. The top has a couple of minor doinks see the pics not bad at all and certainly nothing remotely enough to detour from its vintage Gorgeous looks , no cracks anywhere found , bindings are very food, overall this guitar is an EXTREMLY CLEAN example aside from the afore mentioned . This guitar is in top Vintage used condition and is easily a 9//10 Fit and finish I suggest this was built but a high level Journeyman and can compete or compare with A nice vintage Yairi or Morris or Gibson or Martin for that matter…. .
Because IRs can be recorded in virtually any space, convolution reverbs generally come with a library of IRs ranging from small live rooms to famous venues, top studio rooms, forests, canyons, railway stations and just about anything else you can think of. They sound very convincing, and there's plenty of variety to be had, but once the IR is loaded, there's only a limited amount of editing you can do without spoiling the natural sound. Usually you can apply EQ and also change the envelope of the reverb decay to make it shorter, and adding pre-delay is not a problem, but after that you pretty much have to take what you get. Some companies, such as Waves, have managed to create additional controls but, as a rule, the further you move from the original IR, the less natural the end result.
RARE Epiphone Vintage FT-150 Bard Lefty Conversion with bone saddle. Spruce top, rosewood back and sides. Medium to low action. Beautiful sounding and playing guitar. Superb projection. Rivals guitars costing thousands.In excellent cosmetic condition with normal fretwear for a guitar it's age, and tiny dings here and there but nothing that stands out and looks gorgeous. Includes original right-handed, adjustable bridge. Includes hard shell case and original right-hand adjustable bridge if you wanna convert it back to a righty!
As a total beginner, my wife and i visited a local music shop and spent about two hours talking to several of the employees about string instruments (acoustic guitars, ukuleles, and electric guitars). They answered our questions, taught us enough to play a few chords and let us sample their guitars and amps, stopping in every few minutes to answer our questions as they came up.
{ "thumbImageID": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "defaultDisplayName": "Lakland Skyline Deluxe 55-02 5-String Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Maple Fretboard", "sku": "sku:site51274115060918", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard-1274115060918.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "brandName": "Lakland", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063-00-60x60.jpg", "imgAlt": "" } , { "name": "Cherry Sunburst Maple Fretboard", "sku": "sku:site51274115060902", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard-1274115060902.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard/517707000020063", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard/517707000020063-00-60x60.jpg", "imgAlt": "" } , { "name": "3-Color Sunburst Rosewood Fretboard", "sku": "sku:site51274115060911", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard-1274115060911.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard/517707000064069", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard/517707000064069-00-60x60.jpg", "imgAlt": "" } ] }
Once everything is assembled, check through the instructions one last time for any additional notes on connections, power etc (don’t waste all your hard work by blowing up the board with the wrong power supply). Then plug in your pedal and give it a try. There’s a good chance it will work first time. If not, go through the instructions again step by step and look to see where the problem might be. Missed, incorrect, or reversed components are the most common causes and can be diagnosed just by checking each step carefully.
Every skilled worker needs to look after their tools and musicians are no exception. Sure, wear and tear is normal—especially when you play your instrument often—but a little T.L.C. will ensure your musical gear continues to look, play and sound amazing for years. At Guitar Center Repairs, you'll find a dedicated team of certified musicians who take pride in helping you reach your highest level of playing potential. Make no mistake, your music maker is in the best of hands at GC Repairs. When it comes to looking after your musical equipment, certain things should be left to professionals—pickup installation, wiring customization and structural repair, to name a few. Mind you, there are tasks that every guitarist can take care of at home, including regular polishing and restringing. Of course, not everyone has the time to continually look after their instrument and bringing it to Guitar Center is a great way to save yourself time and ensure that the job gets done right. With that being said, GC's services go well beyond cleaning and string changing. For those of you who own a stringed instrument and find the action is higher than it once was, a truss rod adjustment is definitely in order. Or, maybe you want to personalize the look and sound of your guitar—in which case, an expert will be more than happy to swipe out your pickups for a new set, replace the pickguard or perform any other task to give you an axe that’s entirely your own. Honestly, your best bet is to browse this entire section and see what else is offered in the way of repairs, maintenance and modifications. Who knows, maybe your local GC is having a free guitar setup day, so feel free to have a look around this page or take a swing by the store in your area. Our friendly and knowledgeable staff is always happy to speak with other local musicians and setting up a quick appointment for your instrument will do wonders for your musical enjoyment. From nut and bridge replacements to even amp electronic upgrades, Guitar Center Repairs has you covered.

Mastering guitars isn’t a piece of cake, mainly if you are a greenhorn. You get lost in the labyrinth of types of guitars, each having different size, shapes, and price values. Most of these especially hunt your wallet, burdening down your pockets with hefty price tags. As an amateur, you find no other option but to pay the said amount hoping to get something useful. Indeed, the best electric guitar brands are usually inclined towards the more pricey side. If you have background knowledge about the best brands, who knows you may get your desired guitar in an affordable range. Through this article, you will learn what different types of guitar brands are available in the market.
Rackmounts are most commonly used in recording studios and "front of house" live sound mixing situations, though professional musicians who play electric bass, electric guitar, or synthesizers may use them in place of stompboxes, to create a rackmounted head unit for their speaker cabinet(s). Rackmounts are controlled by knobs, switches or buttons on their front panel, and often by a MIDI digital control interface. During live performances, a musician can operate rackmounted effects using a "foot controller".[14] By setting up effects in a rack-mounted road case, this speeds up set-up and tear-down, because all of the effects can be connected together with patch cords (which can be left connected permanently) and all of the units can be plugged into a power bar. This means that a musician only needs to plug in the main power bar into AC Mains power and plug their instrument into the rack, and the last effect unit's output into their instrument amplifier and/or the PA system.
The Fretted Synth website has mysteriously disappeared (the likes of Native Instruments not happy that they’re giving away so much goodness for free??), so we’re linking to the Rekkerd page that still seems to host the plugins. FreeAmp3 really shouldn’t be free: it features masses of sound-shaping potential and the user interface looks great. If you just want one (free) VST guitar plugin, get this.

The strings fitted to the guitar also have an influence on tone. Rock musicians often[when?] prefer the lightest gauge of roundwound string, which is easier to bend, while jazz musicians go for heavier, flatwound strings, which have a rich, dark sound. Steel, nickel, and cobalt are common string materials, and each gives a slightly different tone color.

With so many guitar manufacturers hot rodding the Stratocaster, it is refreshing to see brands like ESP going after the other popular guitar shape, resulting in the "Super LP" guitar like the ESPT LTD EC-1000FM. This souped up version of the classic single cutaway body combines traditional looks with modern tones and playability, resulting in a fast playing axe that's easy on the eyes, and not too edgy.
The very first thing to remember about pickups is that the active option is not necessarily better than the passive choice, and vice versa. Each type brings its own set of drawbacks and benefits. Passive pickups might be limited in terms of signal strength and tone shaping, but they are much more expressive in comparison to the active pickups in terms of picking and strumming intensities.
The tone controls compensate for and complement the somewhat lifeless and mostly midrange-y character of the average guitar pickup. The gain control, often designed with a pull-boost, basically excites and heats the preamp tubes, which along with judicious use of both the amp and the guitar’s tone controls will begin to produce much of the sonic seasoning and flavor that guitarists and their fans crave as it flows from the speakers.
The neck wood is used for the headstock and for the back of the neck (where your thumb rests when playing the instrument). Be careful not to confuse the neck wood with the fretboard wood, as they are separate and different. All our necks are handcrafted from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
Alongside the Stratocaster, Les Pauls have defined rock ’n’ roll. Everyone from Jimmy Page to Slash to Zakk Wylde has wielded one of these, and the guitar’s fat, creamy tone with near-endless sustain is instantly recognizable. Not everyone can afford a bona fide Gibson, though, but the Epiphone Les Paul Standard makes those sounds accessible to most of us.
Gibbons has also twisted more than a few towering tall tales in his time, but his life is so surreal that it’s hard to tell where the truth ends and the trip takes over. His colorful manner of speech, known as “Gibbonics,” has made him one of Guitar World’s favorite interview subjects, especially since his poetic ponderings are loaded with insight, wisdom and a unique sense of humor.

Leo Fender started Fender Guitars in 1946, and his first innovation was the production of solid body guitars. Up until then, electric guitars were made with hollow bodies, meaning that they were somewhat fragile and somewhat complicated in design. Leo Fender’s guitars offered a more straightforward design; the were bodies made from one solid block of wood and the bridges were simply attached to the body, removing the need for extra calibration of elevated bridges.
The neck is also crafted from mahogany, topped by a 20-fret rosewood fingerboard with a standard scale length of 25.5" and a nut width of 1.75". In contrast to its vintage looks, the neck follows a slim "C" profile that is as easy on the hands as it is on the ears. Finally, this guitar is wrapped in a nice gloss cherry red finish that stands out easily on any stage. Check this one out if you're looking for a quality mahogany body acoustic guitar with an old school vibe.
    Kahler Tremolo bridges feature 6-way adjustable string saddles, which really allow you to dial in your string action and intonation. They have a fairly wide range-of-motion, but less than the Floyd Rose. The Kahler’s have a smoother feel compared to the Floyd Rose, and also have a convenient locking mechanism to convert the bridge into a fixed bridge.
Left Handed 1968 Fender Strat with an insanely rare Blonde Custom Color! This had to have been a special order guitar – has “Blond” written in the neck pickup cavity(see pic). I think I’ve seen one other factory left-handed Blonde Strat, but certainly not from the Hendrix era(both the white Woodstock and black Band of Gypsies Strats were from 1968).
If you do have logic of GarageBand they come with a vast sample library including lots of different guitar sounds, now combine that with melodyne and you can get some pretty convincing custom guitar parts. It's a slow process but it will sound a lot better than most straight VI's, I've done the same with brass section stuff in the past to good effect.
Justin actually has two YouTube channels, one for his guitar lessons and one for teaching particular songs. While his channels are excellent, you’re better off to access them from his website at www.justinguitar.com where you’ll find full, comprehensive menus and links to each video along with explanations of the content. You’ll have no problems of watching a full video, only to discover it doesn’t include what you wanted.
* The guitar has a mahogany neck, but a basswood body. Do not let anyone tell you this is a bad thing. Basswood is a completely acceptable wood for musical instruments. It is not worse or better than mahogany or maple. It is just different. Once again, the differences involved will probably be irrelevant when added into all the other things that players do with amps, strings and pedals to create tone and sound from an electric guitar.
Music is an art, which can create pleasure in our mind. We can do it with the help of a good musical instruments like guitar, flute, harmonium etc. This art has the power to change our mood. Here we are introducing top ten best guitar brands with price in India. These brands are providing high quality guitar. Most of the musicians choose these brands. All are ensuring high performance. Some of the companies provide quality guitar at affordable prices. Our list covers ten well known company. They offer wide range of guitars. If you are looking for a good guitar brand, check out our list.
The cost: The original G&L scheme calls for alternate pot values, but the project here uses the 500K pots found in most humbucker guitars, so all you need are wire, solder, and a few capacitors. On a three-knob guitar, you wind up with one master volume control and two master tone controls, but you sacrifice individual volume controls for each pickup.On a four-knob guitar, you still have independent volume controls, but you lose the independent tone controls.

Longworth also illustrates yet another Martin amplifier offered in 1966, the SS-140. Again, little is known of this, except it’s a huge monster tower with a pair of side handles to help you hoist it. Both the appearance and prefix suggest it was solid state. The 140 might suggest the output wattage. It’s highly unlikely Martin only offered this one model, so there are probably a few other OEM Martin amps floating around.

Okay first of all yes, John Mayer deserves to be on this list. I would've probably put him even higher. I understand if you don't agree but go listen to his Where The Light is album and get back to me on that. I think Eric Clapton should've made the list though. And, although I'm not a big fan of metal I can say as a guitarist anybody can go up and down scales and embelish notes and sound like a metal genius. The artists above put real soul into their music. I think you have an amazing list though. Many people probably would've have thought of some of the people on here… but what about Derek Trucks?
Hum cancelling: hum cancellation is caused by reverse polarity, reverse winding keeps a revrse polarity pickup in phase with a non reverse polarity pickup. To reverse the direction of the winding, simply swap wires, using hot as the ground and ground as the hot. Polarity can be changed on many pickups. If the pickup has bar magnets, simply flip them over. If the pickup uses alnico polepiece AND has the new plastic bobbins such as is common on Fenders, the polepieces can be pushed out with a screwdriver and reinserted "upside down". If the bobbin is fiber DO NOT attempt to flip the polepieces; the wire is wrapped directly around the polepieces and will almost certainly be damaged.
Byrd recommended Kaman show his guitar to folk singer Josh White, who was performing in town at the time. Kaman promptly did so, and for White, it was love at first strum. He enthusiastically agreed to have an Ovation guitar made to his specs, and became the first Ovation endorser, in ’66 and brought his entire family to Connecticut to pick up his first guitar, playing the first Ovation concert with his new guitar. Byrd did eventually get a classical guitar from Ovation, and performed with it for many years.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(914) 963-2949, visibilitySalePrice=2099.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, displaySku=113478791, invMsgBackOrdered=false, skuPriceVisibility=1, stickerUrlLink=null, kitCarouselSkuIds=null, stickerURL=null, availableDate=Thu Oct 25 07:46:49 PDT 2018, invMsgAvailability=, serialized=false, listPrice=2299.99, isShipsInternational=false, name=Cherry Sunburst, storeCity=Yonkers, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Yonkers at Ridge Hill, newPrice=2099.99, condition=null, priceDropPrice=200.00, status=instock, stickerClass=stickerEmphasis, stickerText=Price Drop, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Fair, prop65=null, salePrice=2099.99, warranty=false, wasPrice=2299.99, storeId=861, displayId=113478791, stickerDesc=Price Drop, isOnSale=false} 2,099.99 USD
Before we begin, it should be pointed out that some time ago Guitar Player presented the history of Teisco, based on information painstakingly translated from a Japanese article penned by Mr. Hiroyuki Noguchi of Japan’s Rittor Music, editor of the Guitar Graphic book series. Unfortunately, the article used for reference was an older piece which has subsequently been totally revised and corrected by Mr. Noguchi based on later interviews with principals in the Teisco company. Some of the chronology in the GP story is inaccurate. What follows here is the latest and most accurate information on Teisco (in regards to company history), confirmed in repeated direct communications with Mr. Noguchi in Japan. This information also supersedes some incorrect facts in my own essay on Teisco Del Rey Spectrum 5 guitars in the first issue of Vintage Guitar Classics.
From 1986-1989, “Made in China” Squier Stratocasters carry the “Affinity” decal on the smaller ball of the headstock and have serial numbers as NCXXXX with the first number the year of manufacture, e.g. NC6XXX (Made in China 1986). NCXXXX is also used for Squier Strat Bullets of the same vintage. The Affinities are practically the same as the Japanese-made Squier Bullets of the mid-’80s; the same alder bodies, same rosewood-type fretboard and maple necks. Tuners and electronics are also very similar – not the best but distinctive in sound. Common modifications are more stable tuners, larger potentiometers, better capacitors, and pickups. They had single-ply 8-hole pick guards like the ’50s Fender Strats giving them a classic look. Colors were typically black, white and red.
No tricks here, the volume control allows you to adjust the output level of your signal. But, unlike your amp's gain setting, the best signal-to-noise ratio will be achieved with the pot all the way up. If you have more than one volume knob, it means each controls a pickup. Middle positions can be useful with amps that don't have too much power and distort very easily or to get a crunch sound with a fat saturation. We can also use it as an effect by turning the knob progressively and playing a chord to make it appear (or disappear).
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(352) 367-9067, visibilitySalePrice=219.99, typeCondition=Used, statusText=In stock, isPriceDrop=true, invMsgBackOrdered=false, displaySku=113884849, stickerUrlLink=null, skuPriceVisibility=1, kitCarouselSkuIds=null, invMsgAvailability=, availableDate=Thu Oct 25 08:19:21 PDT 2018, stickerURL=null, serialized=false, listPrice=299.99, name=Maroon, isShipsInternational=false, storeCity=Gainesville, partNumber=null, invMsgBuyToDemand=false, inventoryStatus=1000, storeName=Guitar Center Gainesville, newPrice=219.99, status=instock, priceDropPrice=80.00, condition=null, stickerText=Price Drop, stickerClass=stickerEmphasis, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, prop65=null, usedGrade=Great, salePrice=219.99, warranty=true, wasPrice=299.99, isOnSale=false, stickerDesc=Price Drop, displayId=113884849, storeId=786} 219.99 USD
Fender has shown the spec sheets of its popular Mexican-built Deluxe Series Roadhouse Stratocaster model some love to create a reboot that comes seriously well appointed. The upgraded model features an alder body and bolt-on maple neck, with the option of maple and rosewood fingerboard, finished with satin polyurethane. Keep sniffing around and you'll find other features like the 'Modern C' neck profile, 22 narrow/tall frets, a contoured neck heel, synthetic bone top nut and a set of locking tuners with vintage-look buttons. While the previous editions of the Roadhouse and came with a 241mm (9.5-inch) fingerboard radius, the new model packs a flatter 305mm (12-inch) camber. Yes, the same radius as a Gibson Les Paul, making for easier string bends and lower action. The new Roadhouse features three Vintage Noiseless (1st generation) single coil-sized humbuckers wired to a five-way pickup selector blade switch, and master volume and tone controls. Lurking between the volume and tone knobs is the V6 preamp control, a six-position rotary switch that gives you access to a series of tweaked single-coil tones. Plugging in the Roadhouse reveals a slew of classic Strat tones. The pickups exploit the natural tone and woodiness of the guitar, while the Noiseless aspect lives up to their vow of silence, making them indispensable in a recording situation. As a result, bar metal, this is the best Fender electric guitar for just about all scenarios.

Unless it's broken and will need to be replaced, start with obtaining a new nut that is anything to your liking, preferably a blank nut rather than a pre-cut to avoid improper string height. If cutting a blank try copying your old nut and make adjustments if needed using the neck as a guide after cutting out the nut. To do this take a sharp blade that is easy to work with such as an X-acto and cut the finish that holds the sides of the nut. Make sure to cut all of the finish as it will break apart when you take out the nut.

Jazz guitar playing styles include rhythm guitar-style "comping" (accompanying) with jazz chord voicings (and in some cases, walking basslines) and "blowing" (improvising solos) over jazz chord progressions with jazz-style phrasing and ornaments. The accompanying style for electric guitar in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In rock and pop, the rhythm guitarist typically performs chords in dense and regular fashion to define a tune's rhythm. Simpler music tends to use chord voicings focused on the first, third, and fifth notes of the chord. In contrast, more complex music styles of pop might intermingle periodic chords and delicate voicings into pauses in the melody or solo. Complex guitar chord voicings are often have no root, especially in chords that have more than six notes. Such chords typically emphasize the third and seventh notes of the chord. These chords also often include the 9th, 11th and 13th notes of the chord, which are called extensions, or color notes.
Pitch-shifters work by slicing the incoming audio into extremely short sections (typically a few tens of milliseconds long) and then lengthening each section where the pitch is to be decreased, or shortening each section where the pitch is to be increased. Though cross-fading algorithms and other techniques are used to hide the splice points, most pitch-shifters tend to sound grainy or warbly when used to create large amounts of shift (a couple of semitones or more), though they can sound very natural when used to create subtle detuning effects, using shifts of a few cents. A refinement of the system, designed for use with monophonic sources, attempts to synchronise the splicing process with whole numbers of cycles of the input signal, which makes the whole thing sound a lot smoother but, as soon as you present these devices with chords or other complex sounds, the splices again become audible.
A giant when it comes to the British amplification companies, Vox is always in the conversation when talking about great guitar gear. And that’s no different when the conversation is about amps for beginners. As far as bang-for-your-buck options are concerned, the Valvetronix VT20X definitely ranks at the top – and with good reason: it features tube amp sounds, but with the versatility of a modeling amp (which it is). This impressive hybrid boasts 11 onboard models, 13 effects, and 33 preset programs – allowing you an astonishingly wide range of produceable sounds. And you can control the whole thing from your smartphone, making it easier than ever before. Excellent work, Vox.
To silence your guitar, go into the full-mute position discussed in Part I: let at least two of your fingers rest gently on the guitar strings, and don’t push down on any fret. Alternatively, bring the palm of your strumming hand down on the strings as if you were going to start palm muting. Practice playing power chords and quickly muting them either way.
Thanks. It sounds good without tone shaping ability but I wanted to hear the original sounds. It now has 2 capacitors tied together from the volume pot to 1 tone leg. I am guessing the original tone switch was wired with one cap. for the low & one cap. for middle and the 3rd tone leg was straight wired for treble high. I also wonder how the ground sweep worked on the tone selector?? I just need to know. I’m a DIY guy.

This guitar has a mahogany neck topped by a 20-fret rosewood fingerboard. It has a scale length of 25.62", while the nut width is 1.69". Since the AW54 is from Ibanez, you can expect the neck profile, string action and overall playability to be comfortable and beginner friendly. Wrapping up this affordable guitar's premium-like specs is its Open Pore Natural finish, which gives the instrument an earthy appeal that's easy on the eyes.

Even cooler was the ’66 Vibra Twin (Teisco Del Rey EP-12T), a twelve-string version of the Vegas. This had a slothead variation of the check mark head, with tuners facing alternatively out or back. The trapeze tail picked up the same angular design of the Vegas vibrato. Despite the Del Rey number, the EP-12T did not have a vibrato. The Teisco Del Rey in the ’66 catalog differs from the Vibra Twin shown in ’60s Bizarre Guitars in that it adds a third rotary select for solo/rhythm/bass sound tones, whereas the Teisco omitted this feature. Figure on finding either.
Good results are usually achieved using a dynamic instrument microphone placed 6-8" from the speaker, off-center. If more low-end is needed, move the microphone closer in (2-5") for increased cardioid proximity effect. Use your ears or a set of headphones to find the "sweet spot" of the speaker. Consider miking the guitar itself with a small-diaphragm condenser in the area of the picking hand aimed toward the bridge, for extra string texture in the track.
Non Locking Tremolo FAT/SAT TREMOLO TREMOLOARM-INSTALLATION Der Tremoloarm kann leicht eingesetzt und entfernt werden. Setzen Sie den Arm in die Armöffnung an der Tremolo-Basisplatte. Ziehen Sie den Arm zum Entfernen hoch. TREMOLOARM-EINSTELLUNG (SAT PRO) Zum Einstellen der Höhe des Arms entfernen Sie die Tremolo-Federabdeckung von der Rückseite der Gitarre und verwenden einen 3 mm großen Inbusschlüssel zum drehen der Höheneinstellschraube an der Unterseite des Tremoloblocks.
There are many, many variations of the electric guitar. Science has told us that in order for sound to be naturally amplified, there needs to be a chamber in which sound can resonate. Just look at the construction of the ancient amphitheaters, or the way that the human body has natural resonating chambers that allow us to use our voices, or a stand up bass, with its large, chambered body designed to amplify the resonating strings.

It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join[citation needed]. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.

The Tone knobs on electric guitars are really just potentiometers. It’s important to know that they do not ADD treble or bass to your sound, they only remove higher frequencies as you turn them down and restore those frequencies to the sound as you turn them up. When they are set at 10, you are getting all the frequencies that your guitar and pickups can produce. In some cases, this may sound too shrill or harsh so if you turn the tone knob down, you are removing some of the higher frequencies or “rolling off “ the treble. Turning the knob back up towards 10 restores those frequencies, but isn’t actively “adding” treble frequencies to what your pickups are capable of producing.
This great book of interviews is, in my opinion, one of only a handful of truly essential record-production books, and is packed with down-to-earth recording advice, as well as discussions of the art of production. In addition to the interviews I've referred to in this article, the book also features such greats as Glen Ballard, Arif Mardin, Brian Wilson, Phil Ramone, Mitchell Froom, George Martin and Geoff Emerick, and one of the strengths of Massey's approach is that he often asks them similar questions, which makes for interesting comparisons.
4. Vox VT40X 40-watt 1x10 Combo Amp ($249.99): The Vox is another modeling combo that utilizes a Valvetronix tube preamp to give you the sound qualities of a tube amp. With 13 onboard effects, you can channel quality effects without having a pedalboard at your disposal. Vox’s Virtual Elements Technology has allowed them to carefully recreate up to 20 realistic models of very sought-after amp tones, all within an attractive looking package.
There are several kinds of bridge (located at the bottom of the guitar, where the strings are attached), but to keep things simple you’ll usually find either a fixed bridge or a tremolo bridge. Both have their pros and cons. A tremolo bridge will allow you to experiment with everything from vibrato effects right up to full-on divebombs, and can sound amazing when playing high lead solos. However, tremolo bridges can affect tuning, unless the bridge and nut locks. A fixed bridge is excellent for sustain and tuning stability, although there’s no vibrato. Again, it’s all down to personal preference.
Yamaha FG700S: Yamaha makes a lot of guitars that affordable for beginners with decent sound. FG700S is my best-loved. It is a general or versatile guitar, this is very great for beginners who are not very clear what music style they want to learn firstly. The guitar body top is solid Sitka spruce. The solid wood top makes better sound than laminate top. You can check out the price and features of FG700S here.
It is a popular technique in which the player's thumb or index finger on the picking hand slightly catches the string after it is picked, canceling the fundamental of the string, and letting one of the overtones dominate. It is used by popular guitarists such as Eddie Van Halen, Steve Vai and Joe Satriani who utilize the tremolo arm and high gain amps together with the pinch harmonic to produce horse-like wails from the instrument. - winner333
To quote the super-helpful legendarytones.com, "The Hiwatt DR103 is notably louder and can also run much cleaner than 100-watt Marshalls when needed, and they also have tremendous headroom available. Playing a Hiwatt at a loud volume is, well, an experience." The site adds, "The Hiwatt DR103 design is based around the use of four EL-34 power tubes and four 12AX7 preamp tubes. The transformers are set up so that the amp can be used with various line voltages around the world and speaker impedance can also be set to 4, 8, or 16 ohms with two speaker outputs wired in parallel."
Control knobs and buttons are typically on the front of the cabinet or chassis, though in some cases, the knobs are on a recessed panel at the back of the top of the amplifier. The most basic amps only have a few knobs, which typically control volume, bass and treble. More expensive amps may have a number of knobs that control pre-amp volume (or "gain"), distortion or overdrive, volume, bass, mid and treble, and reverb. Some older amps (and their re-issued versions) have a knob that controls a vibrato or tremolo effect. The 1/4" input jack is typically mounted on the front of the amplifier. In the simplest, least expensive amplifiers, this 1/4" jack is the only jack on the amplifier.
Firmly intended to compete with Gibson's ES-335, the Starfire IV, V and VI retain plenty of Guild style, not least the more spacious cutaways and the wooden foot tune-o-matic-style bridge. Placed side-by-side with an equally new Bigsby-equipped Gibson ES-335, the Starfire V somehow looks more 'retro', more 60s. The body here is made from mahogany laminates with a distinct striped figure under the Cherry Red finish, which was introduced with the first Starfire. Then, as now, it all creates a different aesthetic to the Gibson ES-335. A major difference is the control set-up, which here augments the Gibson layout with a smaller knobbed master volume control on the treble horn, just behind the three-way toggle pickup selector. The pickups here replicate the early-60s introduced 'Anti Hum Pickups' and are period correct, along with the black plastic, chrome-tipped control knobs. It's a fairly weighty guitar for a semi, thanks to the full-length maple centre-block, and has a classic strapped-on feel. It is, of course, thinline depth and feels every bit an ES-335. It has a 'clean' sound, with low-end definition, slightly bright on the treble pickup with decent sustain and, importantly, a very respectable feedback threshold. It likes volume, and while similarly evocative of virtually all those classic styles, it's the stage version and effortlessly takes you on to early The Who, The Jam or Britpop voices, while seemingly equally at home with rootsy, strummier Americana.
Interestingly, the 2019 version of this guitar doesn't stray too far from the more expensive Standard model in terms of looks - some even prefer it over more expensive models because of its streamlined appearance. While there are no high grade tonewoods involved, the Les Paul Tribute still uses the same mahogany body and maple top combination. The 24.75" scale length neck also follows after the Standard model, complete with a 22-fret rosewood fretboard and a 1.695" nut width. As the name suggests, this model features a slim taper neck profile that modern players will appreciate. Finally, it is equipped with a 490R humbucker for the neck and a 490T humbucker for the bridge, which reproduces the sound of old Les Pauls from the '60s.
I've been playing guitar for several years now so I have played a wide variety of instruments. Of course bigger companies such as Martin or Taylor are going to be higher up in the ratings because they produce very expensive guitars and their name has been widely spread. My first ever Yamaha six string, which after three years is still my favorite guitar, is amazing. Its deep and rich tones makes it a blast to play. I can find myself playing any genre for hours because of how reliable and durable it is. They are very well priced for there quality and I would label Yamaha as being the working mans guitar.
For 10" speakers, the most common combo amp and speaker cabinet configurations are 2x10" and 4x10". For speaker cabinets, 2x10" and 4x10" are the most widely used, although 8x10" cabinets are used in stadium concerts, especially in louder rock genres. Other configurations with 10" speakers do exist, but they are less common. For example, there are a small number of 1x10" and 3x10" combo amps and speaker cabinets, and a small number of 6x10" cabinets. Bass speakers are usually made with stiff paper cones. Hartke combo amps and speaker cabinets are unique in that the cone is made from paper, except for the middle, which is made of aluminium. Gallien-Krueger's MB210-II combo amp uses ceramic speakers.
Orville Gibson patented a single-piece mandolin design in 1898 that was more durable than other mandolins and could be manufactured in volume.[10] Orville Gibson began to sell his instruments in 1894 out of a one-room workshop in Kalamazoo, Michigan. In 1902, the Gibson Mandolin-Guitar Mfg. Co. Ltd. was incorporated to market the instruments. Initially, the company produced only Orville Gibson's original designs.[11] Orville died in 1918 of endocarditis (inflammation of the inside lining of the heart chambers and valves).[10]
The same no-compromise attitude that gives the Redondo Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech NuBone nut and saddle for greater sustain, and a Fishman preamp system (with bass, treble, volume control and tuner) that makes it easy to plug in without sacrificing the guitar’s natural sound. The lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style and its laurel fingerboard and bridge further augment its vibrant tone.
Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: http://www.guitarnuts.com/wiring/shielding/shield3.php Some great info on that site, you should have a browse around!
In 1942, Valco unveiled a new Hawaiian lap steel, the Irene, which was offered as a Silvertone in the ’42 Sears catalog. Clearly inspired by the Supro’s first wood-bodied Hawaiian with the pear-shaped body from ’36-37, the Irene had a slightly narrower body and more squared-off corners, and was covered in white pearloid. It also featured a light-colored, painted-on pickguard with dark position markers. Basically, this had the same pickup and control plate as featured on the Clipper.
The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
Although it is well known for its guitars, Gibson's largest business is in fact electronics.[citation needed] Gibson offers consumer audio equipment devices through its subsidiaries Gibson Innovations (Philips brand), Onkyo Corporation (Onkyo and Pioneer brands), TEAC Corporation (Teac and Esoteric brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems and TEAC Corporation/TASCAM.
To combat this, many jazz players began to favour semi-acoustic guitars. These often came with feedback reducing wooden blocks installed inside the body, which addded extra weight to the instrument. But, with the welcome side effect of increasing the amount of sustain produced. Gibson and Ibanez cornered the mass-production market, offering a range of hollow bodied guitars which were well received by jazz players as well as players of genres like blues and rock n’ roll. As time went on, many players even gravitated towards solid body guitars, on account of the unique and arguably more versatile palette of sounds on offer.
Coupling an SM57 with a small-diaphragm KM84 condenser finds favour with Bill Price and John Fry, while Mike Hedges chooses his favourite Sennheiser MKH40. Bill Price also mentions the importance of finding a very close phase match between the two microphones. "What one had to do was balance those mics equally, grab a pair of headphones out in the studio that were turned up nice and loud, and fractionally position one of the mics so that they were perfectly in phase at high frequencies, because if you had one mic five inches away and the other six inches away you'd obviously get really bad phase shift that would take the top off the guitar sound."
The electric bass was invented in the 1930s, but the instrument did not sell well until Leo Fender developed the Precision Bass in the 1950s. As such, the type of bass players who first began trying methods to make their instruments louder with amplifiers and speakers were upright bass players. While the upright bass is a large instrument, standing about six feet tall (with its endpin extended), due to its low register, it is not a loud instrument when played acoustically. This is largely a result of the decreased sensitivity of human hearing, which is most sensitive to mid-range tones; equal perceived loudness for a mid-range sound and a low frequency sound requires much more acoustic power in the low-frequency sound. In the 1890s and early 1900s, upright bass players performing in bars and brothels in an era before amplifiers and speakers were available, particularly those who performed in bands with louder instruments such as trumpet, often found it hard to be heard. About the only solution available in the pre-amplifiers era was playing slap bass, a style of slapping the strings against the fingerboard to make a relatively loud percussive sound. Beginning in the 1920s, the first amplifiers and speakers designed for gigging musicians became available.
{"id": "H82691", "skuOrProductId": "H82691", "categoryId":"site1BAJ", "name":"Thunderbird Classic-IV PRO Electric Bass Guitar", "pageUrl":"/bass/epiphone-thunderbird-classic-iv-pro-electric-bass-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Thunderbird-Classic-IV-PRO-Electric-Bass-Guitar-Alpine-White/H82691000001000-00-120x120.jpg", "addToCartUrl":"/bass/epiphone-thunderbird-classic-iv-pro-electric-bass-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"The Thunderbird IV was first introduced in 1963 and instantly became one of rock's most recognizable bass guitar designs. For almost five decades, the Thunderbird has powered artists as varied as Nikki Sixx, The Who, Kings of Leon, Cheap Trick, Lynyrd Skynyrd, Steely Dan and The Silversun Pickups. Turn on your radio and you'll hear a Thunderbird bass. Now, Epiphone takes all the vintage mojo of the original Thunderbird IV and sends it flying into the future with Gibson TB Plus humbuckers with ceramic magnets and all the 'Bird's original styling and features intact.

The Thunderbird IV was one of the most radical designs to come out of the Gibson and Epiphone Kalamazoo factory in the early '60s, thanks to legendary automotive designer Ray Dietrich, who was asked to put a new twist on solidbody guitars and basses. The sound of the Thunderbird IV was as cutting edge as its design and now the Thunderbird Classic-IV PRO returns with all of Epiphone's first-class quality and a lifetime guarantee, but without the hassles of owning (or hiding) a vintage instrument. Case sold separately.
", "value":"439.20", "priceMin":"439.20", "priceMax":"549.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"40", "inventory":"21", "brand":"Epiphone", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"29", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LROBB,site1HBAL,site1LFML", "stickerText": "Top Rated", "checksum":"397377354900", "priceVisibility": "1"}

*VERY GOOD CONDITION, W/CD (NEVER USED)* PAYMENT is requested within 2 days or 48 hours of purchase.   FEEDBACK: Positive feedback and a 5 star rating is such an important part of the eBay rating system. Please contact me before leaving Neutral or negative feedback, I will try to help you. I will leave feedback when feedback is left for me!   SHOP WITH CONFIDENCE 😎   TRUSTED & ESTABLISHED SELLER!!
Shop our selection of guitar and bass electronics parts and supplies. Everything you need to to finish your guitar electronics project like a pro. Volume and tone pots, pickup selectors and mini switches, jacks, tone capacitors, wire, solder, shielding and more. Get the full potential from your guitar's pickups with the finest quality guitar electronic parts from top manufacturers like: CTS, Bourns, Fender, Switchcraft, CRL, and more. 
You can divide these further into cabinets and combos. A cabinet is simply an amplifier without a head. The head is all the knobs and so on that can be tweaked to produce variations in tone and volume. Combos include the head, so they're often preferred as they're easier to port around. However, if you want a multi-speaker setup, you'll want to opt for cabinets with separate heads.

Fred’s wife Lynn Shipley Sokolow served as our adult student tester. She plays double bass and banjo in the Americana quartet Sugar in the Gourd but is just starting to learn her way around the electric guitar. To evaluate the short-scale/travel guitars, I also consulted a couple of teenagers who are currently learning how to play: 15-year-old Alana Wood, who helped us on our Best Acoustic Guitar for Beginners and Best Ukulele for Beginners reviews, and 13-year-old Charles Lesser.
Now we’ve got the basics down, let’s have a look at some simple modifiers to the circuit. This article first shows you how to add a “killswitch” to the guitar, then uses the lessons learned from that process to change that killswitch to a volume control instead. Finally, we’ll find out how capacitors are used in guitar circuits and install our first tone control.
The Les Paul Custom single cutaway was discontinued in 1961 and replaced with the SG (as we know it) designation for “solid guitar”. This model featured a thin 1-5/16″ body and a double cutaway. Confusion abounds to this day over the name Les Paul Custom. Since the single cutaway was discontinued, Gibson transferred the name Les Paul Custom to the new models.
My visit to NAMM showed me that we’d definitely find at least a couple of good beginner’s amps for less than $100, so we decided to make that our price ceiling for this test. That’s enough to buy an amp loud enough to play with a small combo, compact enough to fit easily into a small bedroom, and light enough for kids to carry. Beginners don’t need more than that. And when you consider that most people who take up a musical instrument don’t stick with it long, it’s wise to limit the expenditure until one really needs a larger or more fully featured amp.
Musicians, audio engineers and record producers use effects units during live performances or in the studio, typically with electric guitar, bass guitar, electronic keyboard or electric piano. While guitar effects are most frequently used with electric or electronic instruments, effects can also be used with acoustic instruments, drums and vocals.[3][4]
{ "thumbImageID": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "defaultDisplayName": "Epiphone Les Paul Standard Plain Top Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Gold Top", "sku": "sku:site51331921974967", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top-1331921974967.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top/517413000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top/517413000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51331921974725", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue-1331921974725.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Cardinal Red", "sku": "sku:site51331921975042", "price": "469.00", "regularPrice": "469.00", "msrpPrice": "782.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red-1331921975042.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red/517413000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red/517413000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51273888006873", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony-1273888006873.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony/517413000035000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony/517413000035000-00-60x60.jpg", "imgAlt": "" } ] }
In 1958, Gibson made a radical design change to their Junior and TV models: with the design change came cosmetic changes to these guitars that would later take on enormous importance. To accommodate player requests for more access to the top frets than the previous designs allowed, Gibson revamped both these electric guitar models with a new double-cutaway body shape. In addition, the Junior’s fresh look was enhanced with a new cherry red finish, while the re-shaped TV adopted a new, rather yellow-tinged finish for its new design.
Originally the Stratocaster was offered in a 2-color sunburst finish on a solid, deeply contoured ash body, a 21-fret one-piece maple neck with black dot inlays and Kluson tuning heads. In 1956 Fender began issuing solid Stratocasters with alder bodies.[4] In 1960 the available custom colors were standardized, many of which were automobile lacquer colors from DuPont available at an additional 5% cost. The unique single-ply, 8-screw hole white pickguard held all electronic components except the recessed jack plate—facilitating easy assembly. Despite many subsequent Stratocaster models (including copies and the Superstrat), vintage Fender models are highly valued by collectors for their investment potential and players who prefer the timbre of older models.
An instrument unlike any other, the electric guitar gives musicians a feeling and hands-on experience that's nearly indescribable. Even with the same electric guitar, no two players sound exactly alike. Every nuance of the player's hands comes out in the electric guitar's tone, both in fretting and plucking the strings. The best players master not only command of the electric guitar, but also its interaction with their effects and amplifier. It's difficult to imagine a world without the combination of the electric guitar and amplifier, yet it's still relatively new in music. By the turn of the twentieth century, it only made sense that the popularity of the guitar would soon be combined with the onset of electronics. Over the past 75 years, the electric guitar has established itself as one of the most iconic, unforgettable instruments in the world. From jazz and big band to rock 'n' roll and funk, popular music would be drastically different today had it not been for the electric guitar.