Sometimes a guitar needs more than a setup, and actual repairs are required. Guitar setup price is minimal when compared to the price of most repairs, so be sure that the problem is not something that can be easily adjusted before making any patch-ups. The cost of repairs can be virtually any price depending on the damage. Refinishing might be over $100, and if a neck needs replacement due to warping, then the price may be several hundreds of dollars. A cracked neck can be glued and clamped for under $100, but the quality of the guitar is unlikely to be regained with this process.

We're not suggesting you become your own handyman 24/7. If your house roof tiles are falling to bits, you'd call a pro, right? But basic setup can be done, and if you eventually need help from a guitar pro, it's good to be able to explain what your bugbear is. Guitar players and guitars are all different, and it's simply good practice to think about what you do and don't like about your treasured instrument.
{ "thumbImageID": "Stingray-Electric-Bass-Mint-Green/J38558000001000", "defaultDisplayName": "Ernie Ball Music Man Stingray Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Mint Green", "sku": "sku:site51500000012369", "price": "1,799.00", "regularPrice": "1,799.00", "msrpPrice": "1,800.01", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/Stingray-Electric-Bass-Mint-Green-1500000012369.gc", "skuImageId": "Stingray-Electric-Bass-Mint-Green/J38558000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

5.  Customer installed strap button on heel of acoustic.  This was a simple job that went horribly wrong because a pilot hole wasn’t drilled.  Result:  Cracked heal.  Fix:  Careful application of cyanoacrylate glue and touch up refinish.  I’ve also seen strap button installations on guitars with bolt on necks where the pilot hole has hit the threaded insert in the heel.  Make sure you know where the insert is placed on that particular guitar before you drill.

{"id": "114488369", "categoryId":"site5AAG", "name":"Used Legacy Solid Body Electric Guitar", "pageUrl":"/Used/GL/Legacy-Solid-Body-Electric-Guitar-114488369.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"799.99", "priceMin":"799.99", "priceMax":"799.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"G&L", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"402390681023", "priceVisibility": "", "itemType": "Used"}

Maybe the most well known amplifier released under the Peavey name, the 5150 is the result of a collaboration between Peavey and Eddie Van Halen. Debuting in 1992, the 120-watt, all-tube, two-channel head featured a searing lead channel that helped usher in a new wave of high-gain guitar ferocity in the early Nineties. Since Van Halen and Peavey parted ways in 2004, the model name was changed to the Peavey 6505 and has become an industry standard for modern metal bands such as Chimaira, August Burns Red, All That Remains and others.
• Now let's add some slap-back room delay. In the seventh insert (which, incidentally, comes post‑fader in Cubase, as does insert eight), go to Delay/StereoDelay. In the left channel, try setting Delay to 1/16T, Feedback to 6.5, Lo to 50, Hi to 15000, Pan to ‑100, and Mix to 20, and enable Sync, Lo Filter, and Hi Filter. Use the same values for the right channel, but with Delay at 1/16, Feedback at 7.3, and Pan at 100.
6) PLEASE DO NOT POST THE FOLLOWING: Memes, jokes/skits, rage comics, sub-related rant posts, spam, advertising of your goods or services, shill advertising, links to outside retailers (links in discussions are ok), gear for sale posts (head to /r/Gear4Sale). Comment manipulation (edits made to conceal behavior) is strictly prohibited. Market research is strictly prohibited.

Great condition. With the exception of the gold foil missing from the back pad, allowing the pink to show thru, the guitar is entirely original. Has a couple of small spots of edge wear, and a chip on the front, the size of this 'o'. Plays and sound fine. Has correct amount of neck relief (.010") at the 7th fret, when fretted at the first fret and the body fret. Includes original chipboard case.

You wont be sorry with this harness, full size volume pot , push pull tone pot/switch both with good throw torque, great solder connects and a quality, all hardware was intact , just remove replace, I did have to carefully bend the lugs on the input switch to get it to seat properly in my Epiphone but other than that minor obstacle all went well, no hum or noise and the toggle feels solid, man Epiphone put some straight up junk electronics in my guitar so this was a great upgrade, thanks Kmise you got a new customer..will order another for my Jackson Kelly..

This article was tremendously helpful! My daughter is entering college for music therapy, and she is already an accomplished pianist but needed a more portable instrument to see patients. We have been scouting out guitars for some time and are looking to get a quality instrument without breaking the bank. Thank you so much for this well-researched article.
yeah i know the GSP has 2 EQ ( well 3 if i wanted to use up a slot in the OD section ) but i use both EQs on the GSP and i prefer a external eq, that i can adjust on the spot depending on that patch, rather then going in and changing the EQ each time on that patch. I use 3 different guitars each one is totally different in sound, so the external EQ really helps.
There is a legitimate physical aspect to the gauge of your strings that will affect how well you play.  Bending and fretting becomes much easier and faster with a lighter set, but in my own experience you will have a “tinnier” tone that must be compensated for with your guitar and amp tone controls.  Speaking of tone, lets look at how string gauge affects the sound you produce.

{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: ovation","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"ovation","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}

And a heads up for anyone interested and if you're like me and somehow missed the fact that Line 6 is releasing a soft vst version of their Helix effects and amp sim package called Helix Native. I'm waiting on making a decision on updating my soft Amp/Fx packages until I see what it is like. If it's approaching anything like the hardware version(s) it should be great.
Conceived in the early 1930s, the electric guitar became a necessity as jazz musicians sought to amplify their sound to be heard over loud big bands. When guitarists in big bands only had acoustic guitars, all they could do was play chords; they could not play solos because the acoustic guitar is not a loud instrument. Once guitarists switched from acoustic guitar to semi-acoustic guitar and began using guitar amplifiers, it made the guitar much easier to hear, which enabled guitarists to play guitar solos. Jazz guitar had an important influence on jazz in the beginning of the twentieth century. Although the earliest guitars used in jazz were acoustic and acoustic guitars are still sometimes used in jazz, most jazz guitarists since the 1940s have performed on an electrically amplified guitar or electric guitar.

Every decision, action, employee hiring, design of new models, etc.-comes from the C.E.O.-Henry J. He dictates every single decision that happens within the company. His power and control over the company is unimaginable. Nothing will change until he leaves or sells the company. First of all the C.E.O. hires every worker- (which is why you wait an eternity to get hired). He doesn't delegate hiring to other departments like other "normal" companies do. That is why you apply, take tons of tests, wait 3 to 5 months (not weeks!), take a drug screen test, if you pass that, then you are finally hired- for a factory job- not a job at the White house! Managers demean workers- most managers don't even have a high school level of education- while most of the workers have some college experience or a 4 yr. degree (including me). Why do the young (20 to 40 yrs. old) educated guys take the job? (1st)- it looks good on the resume, (2nd)- you get to work on guitars, which seems cool at first, until you realize it's a place you do not want to be -most guys leave after a year on average. There is no chance for advancement or a raise. The attitude from Mngt. is intimidation- to rule by fear. They actually get a thrill from firing people, they actually want you to fail, I have never seen anything like it. Everything is about hitting your daily numbers at any cost. Pay raises have been non-existent for years without explanation of why. H.R. is the worst I have ever seen. The women in H.R. dress extremely inappropriate and unprofessional. When you go to H.R. to ask questions, they literally sigh and roll their eyes like you are bothering them -instead of them actually doing their jobs. Nobody knows anything-when you ask for help, you get annoyed responses because they just want to hit their personal number to get out and go home. Managers do as little as possible to not get noticed, but do just enough to keep their jobs- while the workers do all the work to make them look good. Turnover is constant. Stress levels are off the charts. 2012 was my 1st yr. of 2 yrs. working there. We were doing from 650 to 800 guitars a day- (Massman Dr. plant). In comparison the Custom Shop makes about 50 a day. The Memphis Plant- 50 a day. The Montana plant- 50 a day- us =650 to 800 a day! We made the most guitars in 2012 ever -but for the first time nobody received a yearly bonus?!? Which makes no sense -until you figure out everything is about cutting costs-all ordered from the C.E.O. People will skip all their breaks and even lunch to hit their number to get out on time. Countless times we had no lacquer because Mngt. hadn't ordered on time?!? We would have no parts for the guitars (bridges, tuners, etc.)-because they forgot to order on time?!? Yet no one from Mngt. would take accountability for it. One day, 5 people in my dept. (20-30 in the whole plant overall) were fired with no warning (one lady had been there 18 yrs., one guy-8 yrs., etc.)-yet Gibson's attendance policy in their own handbook states you have to be given a oral warning, then a 1st written warning, then a 2nd written warning- yet all the workers were not given any warning. And the reason why is that it had been a slow Christmas season in sales, so they were all let go (ordered by Henry J. -the dictator) to cut payroll-but didn't follow their very own attendance policy-because they don't have to. There is no union, no protection for your job. They tell you you are fired, and to just deal with it, while the powers-that-be don't have to be accountable for anything. It is a dictatorship. A guy I worked there with has been there 20 yrs. And one day he counted up all the workers he remembered being fired or had quit in the 20 yrs. he had been there - it was 350 to 400! If you fail a drug test, you can keep your job?!? So you take 2 weeks off and go to drug rehab- but if you break the attendance policy - you are gone?!?- It's because the company doesn't have to pay you for 2 weeks, and it's something of a tax write off as well (that's what I was told). So basically you can break the law and do drugs- and still have a job. All in the name of saving money. The back break room refrigerator has not been cleaned in 2 yrs! No clock in the main break room for over 5 yrs. and counting! Gibson charged their own employees and their children to attend the company's (workers!) halloween party!?!? Gibson owns Tobias basses-made them 2 yrs. then stopped. Owns Slingerland drums, but hasn't made them in over 12 yrs (pics of them on the website are from late 1990's)! Baldwin pianos (makes on a on-order basis only, and only in Japan, not America anymore). Valley Arts guitars-stopped making them in 2002-12 yrs. ago. Etc,etc.etc! The point being is they buy up all these brand names- and have them on their website as if they are still being sold - but they are not! But they don't say that on their website. The C.E.O. has them to just build value for the Gibson/Epiphone name - to make it more valuable- to sell the company one day at maximum profit. I know this because managers told me this who had first hand knowledge. Guys have been punched in the face during arguments. One guy took a screwdriver and smashed it through the top of a hollow body guitar out of frustration! Arguments are a daily occurrence. My friend would come into work to start his shift, and be so nervous, he would throw up in the bathroom- because of the stress levels and negative atmosphere. Every day literally felt like you were going to prison! I really wanted to make this job work out for me. I am a musician (as are many who work there, many of us play gigs on weekends or nights). My long-term plan was to use my degree, and move up to a corporate position-until I found out what a nightmare the company is. I found out through everyone that I asked that corporate is run the same way! Many might be surprised by this review, because Gibson guitars are really revered by musicians. And outwardly the company has a reputation of the highest quality. But working there was the exact opposite, you would almost rather dig ditches! I have pretty much done it all- I owned my own business, waited tables, worked out in the heat-landscaping, worked in sales, marketing, management, etc. And I have never had such a negative work experience- ever! It affected my health mentally and physically (standing everyday for 10 hrs. or more). And let me tell you for those of you reading this -no job is worth that!
Every new 2008 Les Paul Standard will benefit from Gibson’s proven chambering technique, which leaves each guitar with perfect tone, balance, and weight. Prior to gluing the maple cap on top of the mahogany body, the expert craftsmen at Gibson USA carve out carefully mapped-out chambers in the body using a Computer Numeric Controlled (CNC) router. The positioning of the routes was established after careful examination of the resonant characteristics of the Les Paul. Gibson approached this process with the awareness that every change to the formula would have repercussions on the instrument’s sound. So, in addition to relieving the stress on a player’s back and shoulder, these lighter Gibson guitars also enhance the tone palette in a manner unique only to these guitars. The results are comfortable, lightweight guitars that are acoustically louder, with increased sustain and resonance.
Gotta say a tele has to be the hardest but most rewarding to play. If you make a mistake, you will definitely hear it, but it just helps you're playing get more clean. Les pauls are a lot easier with the shorter scale length and forgiving pickups. Haven't played any metal guitars but I figure it has a lot to do with their setup that makes it sound so easy. You can do just about anything with the tremolo arm into a van halen kind of setup and it'll sound cool. Or you can whack one off with your guitar like steve vai
The C-series archtops were long scale until mid-1934, same as the 000 models. Sometimes a C model is converted from an archtop to a 000 style flat top. A conversion of a short scale C-2 (mid-1934 and later) won't exactly be a 000 either. The neck must be shortened to get the shallower angle required for a flat top. This amounts to about 1/3 of a fret, so the guitar ends up having a 13 2/3 fret neck. This puts the bridge position a little lower on the top, closer to the OM bridge position (but not exactly the same). The other feature on the C models that is different from a 000 is the back arch and the back braces. The archtops have more arch in the back and taller #3 and #4 back braces. Note the 1939 and later C-2 models have no abalone, the neck inlays are pearloid.

: I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...
Sensitivity: Valve amplifiers (current drive) are sensitive to crossover resonances and speaker impedance variations. Quality speaker systems often used passive crossovers that were second-order, constant impedance, and critically aligned to avoid resonant effects. Some quality speakers had copper caped pole pieces, which helped damp impedance variations. Note:- With solid-state amps in voltage drive, power decreases as the speaker impedance rises. With valve amps in current drive, power increases as the speaker impedance rises. Therefore a flat speaker impedance is synonymous with a flat frequency response.
COST – I have touched upon this topic several times maybe but I feel like I need to reiterate. Amps are usually not a cheap thing to come by, especially if you want a tube amp. BUT practice amps are good because they help beginners develop their skills without having to spend several hundred. Needless to mention, even practice amps come at various prices. For instance, Donner Electric Guitar Amplifier 10 Watt Classical Guitar AMP DEA‌-1 we talked about is twice as cheap as Roland CUBE‌-10GX 10W 1×8 Guitar Combo Amp. While price often is a good guideline to which model is better you should always keep in mind that more famous brands will have more expensive models even in the cheap sections. Apart from that, keep in mind that an amp having a lot of great features and effects does not mean it’s good.  
Three full steps down from Drop D. Utilized by Dead by April (on some songs), Metallica in the song "Invisible Kid" from St. Anger, Asking Alexandria (G#) on their self-titled album, Damien Deadson, Love and Death, Architects and The Acacia Strain. Staind also uses this tuning (but with the 2nd string tuned up 1/2 step to emulate a 7-string guitar), as well as several other modified variations of this, such as one in which the 5th string is also dropped from D# to C#.

First up we have the most widely used and most useful pedal ever created – the Distortion pedal! If you’re wondering “What is a distortion pedal” the clue is in the name with how this pedal sounds. It basically takes your signal (the guitar) and distorts it, adding volume, crunch and sustain to your sound and is basically used as a contrast to the natural sound of your guitar. Often used in the chorus of some of your favourite songs.
The MD400 has one Alnico V humbucker at the bridge and one Alnico V mini-humbucker at the neck. Both are ‘rail’-style pickups, which are quieter, and provide more consistent tone and sustain across the strings. Both pickups have been coil-split, too—so push or pull the master “Tone” knob to disable one coil of each humbucker, effectively turning them into single-coil pickups.
The other US-based manufacturers were from Chicago Harmony (formerly owned by Sears), National-Dobro (Supro/Valco) and Kay. Chicago was the largest guitar manufacturing area of the US at the time. The only other manufacturer of Silvertones during this period was the Japanese-based company, Teisco (or Teisco Del Ray as it was formerly called). Teisco created some of the wildest designs for Silvertones, in our opinion. The earliest model was the TG1. This was the first guitar to incorporate an amplifier and speaker into the body of the guitar. Although some people look down on the Japanese guitars we think they've got some really interesting sounds and innovations not found on American made guitars.
Here's a cool tip: If you ever needed to compare sizes between two items, say tuner shafts and a drill bit, but don't have a micrometer, try this. Use a crescent wrench! adjust the jaws to fit the first item, and then see how the other piece fits! Also great for taking measurements of something round. Fit the wrench to the object, and then lay the tool on a ruler and measure the gap. It's much more accurate!

Here you will find a selection of our most popular brands of acoustic guitars. This range includes Australian manufacturers Maton and Cole Clark, prestigious American companies C.F. Martin and Gretsch as well as fantastic value for money in Fender, Yamaha and Epiphone. We stock guitars ranging from beginner to professional, with and without pickups and in all different shapes, sizes and finishes.
In 1967 Vox introduced a series of guitars which featured built in effects such as Distortion (fuzz tone), Repeat Percussion (percussive tremolo), Treble/Bass Booster and a wah-wah operated by the heel of the picking hand pushing on a spring-loaded lever over the bridge. The Delta phantom style guitar and bass, the Starstream teardrop 6-string, and Constellation teardrop bass had such effects.
I've had a Sunburst pattern Ventura when I was a teenager.. it was a nice guitar and played well. recently i saw a really well made Oscar Schmidt gs-1 . not expensive at all. My main guitar for many years was a Gibson howard roberts "artist" dove style. wine red and mother of pearl inlay and gold plated. I eventually sold it to a lady in alaska that plays a lot of blue grass and pop. I got full money out of it. I had it 25 years, so it was vintage by now.
The MG30 is a good place to start. A reliable and lightweight transistor amp, loud enough for jamming and with straight-forward features, it’s especially good for beginners to understand how amps work (e.g. figuring out what the “mids” are on the EQ). Along with a headphones output and aux input (to play along to songs) it also has a useful effects bank with a choice of chorus, phase, flanger or delay, plus two types of reverb!
The guitar is very light in weight and pretty resonant. At this point they were hard-wiring the cord right into the guitar with a nifty spring strain relief on the plug. This guitar has a brighter sound than my Gretsch and I probably prefer it for ultra-clean work because it has that vintage "thang" going on that some call "mojo." I am, however, trying to get the driven sound sorted at this point because of all the overtones. Now I know what sort of sound the Telecaster bridge pickup was based upon!
There’s a huge range of cheap electric guitars out there that would not look out of place on the stages of the world thanks to high quality manufacturing and the brands actually caring about their products – “cheap” does not always mean poor quality and plenty of guitars out there will give you a fantastic playing experience for many years without breaking the bank.
Straight away, we have to talk about how good this guitar sounds. Lots of low-end and mid-range acoustics tend to do one tonal area well, but the Martin DRS2 does an awesome job all round. It’s got deep, booming lows, while the highs remain nice and crisp. And of course, all of this is available acoustically or electrically in the dreadnought cutaway acousticelectric guitar.

In 1959, the Special was given the same new double-cutaway body shape as the Junior and the TV received in 1958. However, when the new design was applied to the two-pickup Special, the cavity for the neck pickup overlapped the neck-to-body joint. This weakened the joint to the point that the neck could break after only moderate handling. The problem was soon resolved when Gibson designers moved the neck pickup farther down the body, producing a stronger joint and eliminating the breakage problem.
In the early 1980s Collings decided to move to San Diego, California but never made it further than Austin, Texas.[3][4] He started out sharing work space with fellow luthiers Tom Ellis, a builder of mandolins, and Mike Stevens. A few years later he decided to continue on his own and take the craft more seriously, moving into a one-stall garage shop.
The use of overdrive distortion as a musical effect probably originated with electric guitar amplifiers, where the less pleasant upper harmonics created by overdriving the amp are filtered out by the limited frequency response of the speaker. If you use a distortion plug-in without following it up with low-pass filtering (or a speaker simulator) in this way, you may hear a lot of raspy high-end that isn't musically useful. This is why electric guitar DI'd via a fuzz box or distortion pedal sounds thin and buzzy unless further processed to remove these high frequencies.
you put in a lot of work, its not biblical correct, pretty good...but take with a grain of salt. but some guitars are made in Korea. I bought a Yamaha 3 piece back like a Kiso Suzuki, I would it was made in Japan The tuners said made Japan. I thought the pawn shop was crazy. I got it for $100 Love this guitar and then one day I looked at the the decal in the sound hole and in the tiniest print "Made in Korea" I felt a pang like o' crap I bought a Korean guitar. But I have a few Acoustics High end a Guild made in the 80's and this Yamaha is incredible. better or just as good as my old Suzuki
Hopefully, this guide has given you all the info you need in order to go out there and find the perfect guitar for yourself. We went into some aspects of electric guitars that will shape your decision the most. Beyond the ultimate considerations discussed between "this or that," the rest is a matter of preference that only develops after you've had time to gain that much experience. Until then, we hope you score the best electric guitar you can from above, as they'll carry you the distance until you've traversed the path long enough to start getting peculiar and picky.  Happy shredding!
Octave effects take the input signal and produce synthesized tones that are one or more octaves above or below it. They can be blended in with the input signal to harmonize with it in real time. The effect can be synthesized by monitoring the waveform of the input and multiplying or dividing the observed frequency by, for example, 2 (to go up or down an octave) or 4 (to go up or down two octaves). This takes advantage of the fact that tones that are an octave apart have a 2:1 frequency relationship; the frequency of the tone one octave higher than a root tone is always double the frequency of the root tone.
Chorus is useful for 'softening' rhythm guitar or synth pad sounds, but it does tend to push sounds further back into the mix, so it should be used with care. Adding more brightness to the sound can help compensate for this effect. Chorus also works well on fretless bass, but tends to sound quite unnatural on vocals. Phasing can be used in a similar way to chorus but, whereas chorus creates the impression of two slightly detuned instruments playing the same part, phasing sounds more like a single sound source being filtered, where the frequencies being 'notched out' vary as the LFO sweeps through its cycle.
{ "thumbImageID": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "defaultDisplayName": "Schecter Guitar Research C-1 Platinum Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Transparent Midnight Blue", "sku": "sku:site51500000239535", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "699.02", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue-1500000239535.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Translucent Black", "sku": "sku:site51364222300326", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "799.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Translucent-Black-1364222300326.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Translucent-Black/H96103000001000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }