-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
Believe it or not, some thought should be given as to where the compressor goes in your signal chain. A good rule of thumb is to place any gain-type effects before modulation effects: i.e., compressors and overdrives before delays or flangers. Another one that's practically set in concrete is to put the compressor before any overdrive, distortion, or fuzz pedal. This is why most guitarists place the compressor first, in order to send a stronger, better signal to the other effects.
• Fade to Bleak: Since there are no pickups, juice or amps involved in acoustic guitar playing in its purest form, string composition – which affects how a string responds to being struck and the retention of tonal qualities – is particularly important for acoustic guitars. Bronze, phosphor bronze and coated strings tends to be the preferred varieties, ascending in price. Bronze strings start out the brightest, but lose their high voices relatively quickly. Phosphor bronze offers a darker tone, but still with a clear, ringing top and the phosphor allows the strings to produce their optimum sound longer. On acoustic guitars, coated strings trade a longer life for less brightness, but good warmth and presence.
I have a epiphone sg 50th edition and it does great by me in all I do. I play a lot of 60's music and otherwise all I want. It's very versatile and not to mention the cherry red wood grain finish makes it looks really awesome. Everyone I've ever met has bragged on it and I've been offered all kinds of guitars from Washburns to fenders. Just recently I went to a old guitar player of 30 yearsiin my grandfathers neighborhood and he absolutely loved the tone and playability. He said the only thing it might need to make it better was a professional setup which I'll soon be getting. When I first got it I complained a lot that the strings were a bit harder to push down due to the longer scale of the neck (the neck on it is pretty long) however. If you' work with it for about 2 days off and on its no problem. I love epiphone and judging from what I've played in ibanez guitars I might soon invest in one of them.
The word distortion refers to any modification of wave form of a signal, but in music it is used to refer to nonlinear distortion (excluding filters) and particularly to the introduction of new frequencies by memoryless nonlinearities. In music the different forms of linear distortion have specific names describing them. The simplest of these is a distortion process known as "volume adjustment", which involves distorting the amplitude of a sound wave in a proportional (or ‘linear’) way in order to increase or decrease the volume of the sound without affecting the tone quality. In the context of music, the most common source of (nonlinear) distortion is clipping in amplifier circuits and is most commonly known as overdrive.
You will see numerous inputs and outputs for sound, depending on your computer. You will want to enable the main one (in which all of the subdevices are listed) and two others: one for input, and one for output. For input, look for something similar to “Line in”. If you only have a microphone jack, enable that instead. For output, look for “Stereo out” or something similar.
There are two different Vox Shadows (the Shadow made between 1060 and 1965 and the White Shadow made in the early to mid 80's). The Shadow is a double cutaway solid body with six-on-a-side tuner headstock,with 3 single coil pickups, the hardware is chrome, it has a white pickguard, tremelo bar with a retangular cover over the bridge with the VOX logo on it. It also has one volume and two tone controls and a pick-up selector knob on the lower cutaway bout. This is based on information from the 7th Ed. of the Bluebook of electric Guitars....Hope it helps...John
Almost all bass amplifiers are designed for use with an electric bass, which has magnetic pickups. When a double bass player is plugging their instrument into a typical bass amp, the signal usually comes from a piezoelectric pickup mounted on the bridge or beneath the feet of the bridge. The direct signal from a piezoelectric pickup does not usually sound good when it is plugged into a standard electric bass amp. Many upright bass players who use piezoelectric pickups use a preamplifier or preamp-equipped DI box before the signal is sent to the bass amp. The preamplifier helps to ensure that the impedance of the pickup signal matches the impedance of the amplifier, which improves the tone. Some preamplifiers also have equalizers which can be used to modify the tone.
Two other totally new guitars debuted in November of ’88, the ST-3 ($225) and ST-4 ($235). These were both Strats, with maple necks, rosewood fingerboards, volume and two tones, five-way select, chrome hardware, SAT non-locking vibrato, in black, white or red with graphics. The ST-3 had three single-coils, whereas the ST-4 had a ‘bucker and two singles. Cases or gig bags were extra.
Continuing the example of making comparisons of specifications, there are Guilds in this price range that come with all solid woods, a rosewood fretboard, and with built-in tuners. Also, Epiphone Masterbuilt has solid wood acoustics, even some with cedar tops which are highly sought after by finger style players, plus they have a rosewood fretboard, a built-in tuner, two pickups and deluxe tuning machines. Moreover, both of the above guitars sell for less than the Taylor 200 series model you listed. So which is better?
I don't understand why everyone is so "Gibson is the best". They have been going downhill for years. Unless it's a custom shop job, it is hit or miss. the same with Fender. Everyone likes them because of the mystique of the players that played them over the last decades. It's a "lifestyle cult" with name recognition. If you want a guitar that plays and sounds like a Gibson of Fender is supposed to but want to be guaranteed of the quality you are receiving and spend for a fraction of the money, then get a used USA Custom Shop made Washburn. You will never look back. I say used because the Chicago custom shop has apparently closed. Anything made there from about 1993 - 2008 that looks like a competitors guitar will outmatch the competitors version every time. You will notice that it is hard to find a used custom shop Washburn around. That's because they are the guitar worlds best kept secret. The people in the know get them - at a massively reduced price - and keep them. People hang onto their USA Washurns for the most part and there i a reason for that. They are that good.
The Effect:Distortion is one of the most popular and desired guitar pedal effects, especially among rock, hard-rock and metal players, The Kinks, Jimmy Hendrix, Metallica, to name a few. Prior to the introduction of effect pedals on the market, Distortion was mostly achieved by forcing an overwhelming amount of electricity passing through a guitar amp’s valves. Nowadays this is no longer necessary. Arguably one of the most famous and newbie friendly option and at the same time prime example for a distortion pedal is the classic Electro-Harmonix SOULFOOD.
Guitar is well made. Sounds awesome. The overall height of the strings (in relation to the frets) were not bad. However, it needed to be setup. After having the guitar setup at my local shop, it is so much easier to play (don't have to press as hard on the strings). The Guitar gig bag that comes with the bundle offers zero padding. The Tuner works well, however, since the guitar comes with a built-in tuner, you don't need a separate one. I have not used the dvd that came with it. I use a different set of instructional dvds (purchased separately). Overall a great guitar. Definitely recommend it.
This workshop includes: lecture, demonstration and hands on experience in advanced guitar electronics. Students will study alternate guitar wiring schemes demonstrated by instructor Scott Walker, and stereo wiring and Onboard Effects loop options will also be covered. This class will focus on signal paths, diagrams, and component selection, in passive and active circuits. Students will learn about basic preamp design.
This is hands down THE BEST brand there is! Trust me, I've been playing guitar since I was a kid. I've had used, owned, and tried every guitar there is. Gibson is NO WAY better than PRS, the sound quality of a PRS is awesome! They are pretty light, the designs are awesome as well, although PRS is a bit more expensive than your average guitar it is worth every penny! Gibson's are way too over priced and would never match the PRS. I used to own a gibson sg and lp, and I sold them after I had my own PRS. If you really know the difference between a good and a great guitar you would pick PRS over any other brand. Period.
Dont buy too cheap. The cheaper the guitar, the harder to play and the less quality the sound. You want a rewarding feel and sound or you will get discouraged. Buy a better guitar used than a new one cheap. Are you going to learn chords or fingerpicking ? Some guitars are better sounding for one than the other. Some like Taylors are versatile and provide good sound for both. Be smart. Good luck.
This has changed with the introduction of the 2018 Gibson Les Paul Studio, which now has white neck binding. Apart from this cosmetic addition, there are other new features. It has cryogenically treated frets, which means the fret wires have been exposed to extreme cold before they were fitted on the guitar’s rosewood fingerboard. The result? More durable frets that don’t wear out as quickly as regular frets.
I'll start off by saying I am a novice guitar player. I've been playing off and on for 30 years, but more off than on. I've been playing on a hand-me-down Yamaha acoustic that was once a great guitar, but through many years of moving, poor storage and not doing anything other than the occasional set of new strings, that Yamaha just did not play well. One reason I was so off and on is that I could never get a clean sound from the Yamaha. I just thought I was not capable of learning guitar. Then, about a year ago, I tried out a friend's Fender acoustic and, after apologizing in advance for my poor playing ability, found that the same chords I struggled with on the Yamaha sounded crisp and clean on my friend's Fender, and I didn't have to make my fingers bleed
mid-1939 Popscicle bracing on D body sizes. See the above picture for what the popsicle or T-6 or upper transverse graft brace is. The popsicle brace was added to the underside of the top of the guitar, below the fingerboard. The brace was added to help prevent top cracks alongside the fingerboard. Since the first D body size was made in about 1934, problems obviously came about and Martin added the brace by 1939. The brace does not appear in pre-1939 Martin D-sizes, but transitioned in around 1939, and is present in all 1940 and later D models. Without the popsicle brace, the top is attached only by the strength of the spruce fibers and a 1/2" x 2" glue area where the top overlays the soundhole #1 brace. With the popsicle brace there is an additional 1" x 2" glue surface directly under the fingerboard. Unfortunately the popsicle brace can deaden the sound of the upper bout area of the soundboard, and the popsicle brace doesn't always prevent the top from cracking along the fingerboard either. As people search for why the old Martins sound so good, they examine every aspect of them and the popsicle brace usually enters the conversation. Here's some data on popsicle braces:
Brian Moore - Known for their innovative custom electronics and distinctive designs, Brian Moore Guitars continue to produce guitars that go beyond the conventional. Aside from their custom-built instruments, they now carry a host of artist signature models. One of their more popular products is the iGuitar, which feature acoustic MIDI, piezo, 13 pin Synth and more.
“Well, the legends didn’t use pedals.” Whenever somebody says something like this, and you ask them to whom they are referring, they’re often misinformed and factually wrong. “Jimmy Page”. Uh, ever see him use a Tone Bender Mk II? “Jimi Hendrix.” Please feel free to complete a Harry Potter novel while I finish laughing. “Stevie Ray Vaughan.” Ibanez and Maxon should retire a green Tube Screamer colored banner with his name hanging from their company rafters. This list goes on and on. Yes, there are lots of cool dudes back in the old times who didn’t use pedals to help them create some classic tones, but once they had the chance, they chose to.
Make sure to sit down and strum the notes when trying out a guitar. It should not be hard to push down the strings with your fretting hand, even if you are just starting out. The action should be as low as possible to make learning easy. Make sure to check for loose parts; there should be no rattling noises coming from the inside of the guide or inside of the neck. Also take a business card and run it along the bottom of the bridge to make sure that the bridge isn't coming off. An electronic system is not a big deal when buying an acoustic because it's relatively easy to add an electronic pickup component later on should you decide you need one.
We considered more than 40 guitars for this guide, and we tested the 13 most promising models. A couple of models aside, our testing panel thought, as Lynn Shipley Sokolow put it, “These are all of good quality and are all adequate.” In fact, certain models we didn’t pick may be a better choice for beginning guitarists who are into a specific style—most notably metal, which is clearly the primary market for brands such as Ibanez and Jackson.
Telecasters are another guitar in Fender's lineup which include a single cutaway to get at those higher frets. These guitars feature two single coil pickups which can be used separately or with each other for producing large-scale sounds. Telecasters are well-known for producing a thin, biting sound which is common in country music, but nowadays they are popular amongst indie musicians as well. These aren't the ideal guitars for heavy metal or rock music. If you want to concentrate on country or indie music, a Telecaster can do the job for you.
Brand new in ’64 was Teisco’s first double-cutaway, the Model EP-9, a small-bodied thinline hollowbody archtop. The EP-9 had a pair of pickups, mainly the oval kind with center poles. This had the old center-humped three-and-three head (no open-book dip), and the rectangular edge inlays. Controls were placed on the lower treble bout on a triangular plastic plate, with one volume and one tone, and two on/off rocker switches.
The components are adequate. The electronics are good, have good tolerances, but the off board components are cheap and flimsy. The hardware is quite good, especially the enclosure. The PCB is well designed and well labeled. The big problem is that the layout instructions are quite poor and mislabeled in a number of places. There is no bill of materials so the components can be quite difficult to distinguish even when they're labeled. Additionally, product only includes one color of wire and does not include digital instructions as indicated in the product description.
In the years since, Novak has built the instruments of choice for the likes of musicians like Charlie Hunter, Phillip De Gruy, Joe Louis Walker, and Henry Kaiser, to name a few. As time passed, he experimented with a variety of design ideas involving the use of non-traditional woods. At times, he was viewed as downright crazy from many a purist's standpoint. But he turned the other cheek, seeking the solutions that would satisfy his own personal playing requirements.
Wiring: If you chose the optional snap together wiring, then all of our instruments come pre-wired and pre-soldered, so that you can assemble the instrument without needing to do any soldering. You simply snap a few connectors together to complete the electrical connections before you screw down the pickguard, control panel, and output jack plate. This is detailed on the guitar kit wiring and hole drilling description page. If you would prefer to not have your kit pre-wired and pre-soldered, please let us know.
I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.
If anybody needs a Bridge, I have a Teisco Roller Bridge for sale, it is a a copy of a Gretsch Roller bridge but includes a solid steel Base like a Rickenbacker Bridge Base. The string saddles are rollers which are adjustable side-to-side for proper string spacing, and each side of the bridge is adjustable for Height. It is in excellent condition, probably from 1965 thru 1968. On a scale of 0 to 10, it is a 8.
For example, Pat Metheny took his Gibson ES-175 and ran it through some lush chorus, delays, and compression to create his signature jazz sound. On the flipside, John McLaughlin plugged his guitar into a Marshall stack for the wild rock tones heard on records with Tony Williams Lifetime and Miles Davis. In fact, Joe Perry of Aerosmith plays a Gretsch Falcon. The hardest thing to do when playing a hollow body guitar through a loud amp, or a hollow body with a dollop of distortion, is not to get bowled over with feedback. Either way, these guitars are celebrated for their big, full sounds, and can be applied to many musical situations.
Reverbs and delays can sound particularly unruly when run into an amp set dirty. If you use natural amp distortion but still like using pedals, you can run some effects into the front of your amp, and run time-based effects into an effects loop (most modern amps with channel switching will have an effects loop). Some modern programmable pedals, such as the TC Nova System or Eventide Time Factor delay, allow you to switch between -10 and +4 operation, so you can use them in front of your amp at the instrument level or at line level in an amp effects loop. This is really handy, allowing you to create and store presets tailored for using the pedal either in front of the amp or in the loop. Of course you can also use studio-type rack effects in amp effects loops. Units such as the Fractal Audio Axe FX and TC Electronic G-Major work great in this configuration, allowing you to store many presets and get pristine time-based effects, whether you are using clean sounds or dirty sounds.
Electro-Harmonix’s Memory Man was one of the most popular solid-state delays ever, and even with its meager 5 to 320 milliseconds delay time was little short of revolutionary upon its introduction in 1976. At around $150, it was something of a bargain, too, though not dirt-cheap by any means—considering that at that time you could buy a new Stratocaster for just a little over three times that figure. The Memory Man was launched with Reticon SAD1024 chips, but E-H switched to quieter, better sounding and more adaptable Panasonic MN3005 ICs when these became available, and the latter is the chip found in the better-known Stereo Echo/Chorus and Deluxe models.
A list that's bound to be disagreed with, and I do. Although I love Hendrix, Clapton, etc. I'm still most impressed with Mississippi Fred McDowell. Bass line, rhythm, lead slide, and singing simultaneously and effortlessly. Several video performance on DVD are available, in case you listen to just an audio recording and wondered "who are the other guitarists playing, they're really good together?" nope, just Fred.
The Gibson-owned Epiphone Company makes around 20 models of the Les Paul, most are similar copies of Gibson-made models, although when inspected closely, the Gibson originals are most often superior in craftsmanship and materials. Made in places outside the U.S., the Epiphone Les Pauls are made from more commonly available woods using less expensive foreign labor and have less hand detailing than the Gibson models, and, as a result, sell for a lower price. Epiphone Guitar Co. has been owned by Gibson Guitars since the 1950s. Once Gibson purchased Epiphone they quickly began making lower-quality guitars based on Gibson designs.
The Fender Squier Bullet Stratocaster is one of the most popular low budget electric guitars on the market. For what money can buy around this price, it’s good value. The quality of the hardware, tuners and pickups can’t go up against the original Fender Stratocaster, but it still sounds really nice and feels good for playing, practicing and some first gigs. A perfect entry-level guitar that is worth the investment.
Description: Body: Laminated Maple - Flamed - Top Wood: Laminated Maple - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Ebony - Binding: White - Frets: 22, Jumbo, Medium - Inlay: Pearloid Thumbnail - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Rocking Bar - Cutaway: Double - Hardware: 2x Volume Control, 1x Tone Control, 3-Way Switch, Schaller Tuners - Pickups: FilterTron - Pickup Configuration: Dual - String Instrument Finish: Orange Stain
In the 1970s, 1980s and 1990s, a growing number of composers (many of them composer-performers who had grown up playing the instrument in rock bands) began writing contemporary classical music for the electric guitar. These include Frank Zappa, Shawn Lane, Steven Mackey, Nick Didkovsky, Scott Johnson, Lois V Vierk, Tim Brady, Tristan Murail, Brian May and Randall Woolf.
If you know that you want to use your mini amp to reduce the audio footprint of your jam sessions as much as possible, you’ll pretty much have your pick of the litter among miniature models. That’s because even the most powerful of these amps can produce viable tone at a very low volume, as manufacturers know that this demographic needs the ability to play quietly. If you want to maintain a certain degree of audio fidelity and flexibility, you might need to aim for one of the slightly larger mini amps out there. Models with at least five, and preferably 10 watts will be the best for generating a realistic and presentable guitar tone. Some of these are even nice enough that you could use them to perform at any venue capable of miking the amp itself.
This general tip applies to all so-called temporal effects. Anything that messes with the timing of the signal should come last. If you were to put reverb before distortion, which is often one of the first effects in a chain, that distortion would be applied to both the original signal and all of the echoes. In other words, you’d get a mess. Naturally, this isn’t a rule written in stone. There are always exceptions. However, it is best to start with reverb at the end as this is the most neutral position.
Perhaps not as famous as its brother, the EMG 81, this awesome EMG 85 still rocks and makes a worthy appearance in our chart. Perfect for the neck position (although equally solid in the bridge), the EMG 85 features Alnico V magnet-loaded close aperture coils to deliver a natural tone with a huge output, with no loss of clarity as the volume is pushed to its highest.
I’ve tried some guitars for beginner, being beginner myself! And let me tell you… around 500 USD and under 1000Usd they are plenty BUT. Avoid Epiphone. I got one and let me tell you, the material is weak. I’m mean the construction material. Some time after buying my Epiphone standard pro (lespaul) I tried a PRS SE245, it is a single cut too but… man, the playability and the quality of construction are absolutely not comparable. For the price I think it is the best single cut you could find! And to say the truth, now I started to play correctly. I’ll sell my first one and I’m going to buy a PRS McCarty 594. PRS is really high quality material. From bottom line to high end models!
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Main Spring Stopper Tremolo Block Stop Rod With the guitar tuned correctly, adjust the Main Spring make sure that the Stop Rod makes contact with the Tremolo Block and Stopper. If the Stop Rod does not make contact with the Tremolo Block and Stopper, adjust the Main Spring adjustment screw until contact is made.
Another advantage of an Apple Macintosh computer is that they come with a much better built-in sound card than those of almost any brand of Windows PC. You can actually use the headphone audio output of any model of Apple Macintosh without needing a professional audio internal or external audio interface and get acceptable results. Of course, if you do in fact want the highest-quality audio output, especially for multiple channels, you would want to purchase a third-party external audio interface.
The most common route for absolute beginners will likely be a good, old fashioned guitar instruction book. We’ve all seen at least one of these kicking around. They tend to have a guitar and some interesting 80s-inspired graphics emblazoned on the front. The typical format is either an encyclopedia of scales and chords (indeed, some on this list follow that formula), or a series of songs broken down into digestible theory tidbits often accompanied by an ancient information vessel known as a Compact Disc.
Probably also new in ’39, though it could have been available as early as ’38, was the Supro No. 50 amplifier. This was a typical Supro rectangular cabinet, now with a round grillcloth broken by two horizontal strips of wood. A Supro logo plate sat on the upper left corner. It had a flat leather handle and five tubes putting out 12 watts through a 10″ speaker. There were two inputs, an on/off switch and volume control. Cost was $50.
Speaking of, you’ll probably look to upgrade either the bridge or the tuners at some point, because heavy whammy use will pretty quickly throw this out of tune. If you don’t use a whammy often, this makes a very fine choice, indeed. The neck is satin finished for better feel. All in all, a very worthwhile guitar that comes in at less than half the price of most of the other options on this list.
hi-can you put two caps on your two tone pots or will just the one do as is mormal-aslo on a push pull pot do you need two tone caps one for the bottom half as regular-if putting on the square part of the push pull pot -can you put on any of the six lugs ie the ones not used -i have instaleed a push pull swich but when down the tone on the neck pickup does not seem to have any effect -when i pull it when usingn the pull pull it does have a effect is this normal-i have now neck-bridge-and all three in a row-when not pulled which would be normal five wat switch sound i seem to get a telecasster sound ,i thought this was the case when i pull it up=i have now a nice selection of sounds—thankls sean
Compressor pedals add a softening effect too, by reducing the front edge of notes and amplifying their tails. This increases sustain by bumping up the signal as the note fades out. Most compressors allow you to control both the thresholds (upper and lower limits) and the knee (the speed with which the signal is raised or lowered). The big appeal for guitarists is the compressor's ability to simulate the natural compression that tube amps generate when driven at medium to high levels. A good compressor can help thicken up the sound of your guitar and add extra punch to your performance.
Ibanez RG20061, also known as the RGT220A CAH, is an RG series Prestige limited edition guitar model specially created for the 2006 Winter NAMM Show. It based on the RGT220A, but stained brown, although claimed to be barbecued to a chocolaty brown color. Features include a neck through body construction, ash body wings, Dimarzio IBZ pickups and the Edge Pro tremolo. Only 153 Made 8/10 Condition
There have always been slight variations in the color of the cream plastic parts used on Gibson and other guitars. It's not uncommon to see brand new and vintage guitars with bindings, pickup rings, toggle switch rings and pickguards that don't perfectly match in color. We do our best to match all our cream products, but there's no absolute control from batch to batch, or from supplier to supplier.
Make sure it feels comfortable, especially the fretboard and body. Make sure there are no buzzing notes and that the frets are flat and even. Avoid electric guitars with whammy bars as they may be too difficult to tune for beginner guitar players and make the guitar more expensive (maybe one on the next electric guitar you buy). The tuning heads should be easy to tune and stay in place, and try playing the guitar through an amplifier to check for a good sound quality (hopefully no humming or buzzing).
The SD is a classic. This had a more exaggerated Jazzmaster shape than the T-60. It had a dramatically swept back lower horn, and an offset pair of waists, looking as though it’s been slightly melted. These had bolt-on necks with the elongated Strat-style head, with round logo stickers. A rectangular plastic control panel was mounted above the strings, with large thumbwheel controls and on/off rocker switches, while a large-ish pickguard was mounted under the strings. The controls on the SD-4L were especially interesting, taking their cue from the Italians, no doubt. The thumbwheels were for volume and tone, while there were a total of six rocker switches. Four of these were on/off for each of the four pickups, but in between were two more. Their function is unknown, but a good guess would be phase reversal between the front and back pairs of pickups. Both models had the rectangular fingerboard edge inlays. With “L” designations, both had vibratos. These consisted of a fairly simple bar for string attachment with a series of springs behind it, all covered with a hinged metal cover. The handle was extremely long. Pickups were the beefy tall rectangular type with metal cases and black plastic center tops with exposed pole pieces (these could be screws or squares). The SD-4L had four pickups, in two pairs, while the SD-2L had two. If I couldn’t have a Spectrum 5, I’d be looking for one of these (I am!).
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use a worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.
Most Gibson guitars feature two humbucking pickups, giving them a very full, clean sound. They are very simple in design, and easy to use with a focus on quality. Maintenance is also easy with Gibsons. Their bridge style places the strings closer together than the likes of Fender or Ibanez guitars, making them slightly different to play. While there is slightly less room for error in finger placement, the strings’ proximity makes them a better fit for small hands and for instrumentalists who need to rapidly navigate the fretboard.
Fortunately, some of the best happy accidents have been preserved for posterity. For over 40 years Seymour W. Duncan has kept meticulous notes on the best pickups to cross his workbench. Many of these have been resurrected as Seymour Duncan models. For example, our ’59 Model is based on a particularly sweet-sounding ’59 P.A.F. in one of Jeff Beck’s guitars. Another of our models, the Pearly Gates, is inspired by another, rawer-sounding ’59 P.A.F. That’s just one example of two supposedly identical pickups from the same year displaying different musical personalities.
Unlike distortion or overdrive, fuzz is meant to not sound like an amp at all. It is meant to add harmonic content and transistor-like goodness to your tone. Fuzz boxes were used extensively in the 1960s to create an over the top distortion sound. Many times fuzzes will completely change the sound of your amp, so be careful and really focus on buying one that has the sonic makeup you are looking for. Hendrix, Cream-era Clapton, and Dan Auerbach are well known fuzz users.
The downside of going electric is that now you have to think about a soundboard, or at least an amp. And no self-respecting guitarist can live without a few pedals to tweak the sound. I mean you only need a volume pedal to control the level, a tuner might be nice, chorus is always appreciate, a nice delay pedal wouldn’t be bad, and you might need a clean boost for those solos. Then again, you might just want to plug straight into the soundboard and just enjoy that amplified acoustic sound.
Finally, according to Longworth, the earliest examples of these instruments had laminated bodies made of maple, rosewood and mahogany. A second series was made with a combination of maple and rosewood. A third series was made with maple and walnut. The #1034 EM-18 shown here appears to be very early yet has maple and rosewood, so it’s not clear if materials are indicators of chronology or simply the vicissitudes of fate (or the woodshop, as the case may be).
A difficult effect to explain, the compressor’s value is in it subtle and careful use. A compressor acts like bumpers on your signal's amplitude, preventing the volume from spiking too loud while also preventing the volume from decaying too quickly. Because of this, it increases sustain - which is great for solos - while evening out playing dynamics. Country and funk players use compression heavily to achieve spanky and crisp punctuation within their playing. Compressors will add noise to the signal, so many higher end boxes will have a noise gate feature. Other than making cleans sparkle, you can also front-load your distortion or overdrive to get great clear sustain.
After the dissolve of Kay/Valco in 1968, the Engelhardt-Link company bought the upright bass and cello lines[clarification needed] at the asset auction in 1969, and continue to produce the same instrument lines till today. Manufactured in Elk Grove Village, Illinois, Engelhardt basses and cellos are sturdy instruments, widely used by students and touring professionals. The ES9 Swingmaster bass (formerly the Kay S9 Swingmaster), is highly thought-of by jazz, swing, and bluegrass musicians.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
: Decca's flat-top acoustic guitars seem to usually sell for $50-75. They're not highly regarded because (a) acoustic guitars don't have the collecto-mania of electric guitars, except for certain brands (Martin, Gibson, etc.), and (b) the tonewoods Decca used were inferior to solid spruce as used by the aforementioned makers. Indeed, Decca often used plywood, which doesn't yield very good tone in an acoustic.
If you plan to be the more lead-orientated guitarist, good for you. You’ll get more chicks and a higher place in the band pecking order. You shouldn’t however, neglect your chordal playing. A song can exist without lead lines, but not without rhythm. Don’t be fooled, every one of your guitar heroes is invariably a demon on rhythm guitar too. It’s a prerequisite: you have to understand the chords, rhythm, and harmony of a song before you can play any meaningful melody on top of it.
Effects such as chorus, phasing, flanging and pitch vibrato are created using pitch modulation and, except in the case of vibrato, the modulated sound is added back to the original to create the effect. The pitch modulation is generated by delaying the signal by just a few milliseconds, and then modulating the delay time, using a low frequency oscillator (or LFO). For vibrato, this is all that needs to be done and, because the delay time is actually very short, the effect is perceived as happening in real time. The other effects, however, generally rely on an equal balance of the dry and modulated signals to achieve the strongest effect, so it is easier when working with plug-ins to adjust the wet/dry balance using the plug-in controls, rather than adding the wet only signal via a send/return loop. As a rule, these effects aren't very processor-intensive so, if you're working with plug-ins, you can probably afford to insert as many as you need into track or bus insert points as required. Stereo versions of these plug-ins may generate different modulated delays for the left and right channels to create a more dramatic spatial effect.
It is nice that it starts easy and progresses as you improve, but there are some catches. If you are really good, you will be annoyed at the pace it adds new material. It also can be frustrating when it adds a few extra notes, you are caught of guard, it takes them away, and you have to play through the song a few times to get them back- at which time they catch you off guard again. I wish you could opt to lock them in, or just reveal all.
When you buy an acoustic guitar that you’re drawn to because of its aesthetics, you will become more motivated to play it. This is especially important for beginners who may find it tedious to do the same exercises over and over again, or who may be tempted to skip practice sessions. A good-looking guitar is something you will love playing again and again.
Splitting the humbucker #1: by grounding the coil-tap and connecting the hot lead to output we’re rendering the coil closer to ground useless because both of it’s leads are grounded. What we’re left with is the coil closer to the hot lead. Since we only have one coil, it will not be hum-cancelling on it’s own. It’s common to split a humbucker, so it can be wired with another coil in parallel, making the noiseless combination, especially on H-S-H guitars.
For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound.
Les Paul was an extraordinary pioneer of music and instrument development, and he also paved the way for popular music today from blues and jazz to rock, country, and metal. The Les Paul electric guitar stems from one of the best electric git brands to date – Gibson. This came to be with Paul’s and Gibson president Ted McCarty’s collaboration to find the best electric guitar with resonance and sustain but with less distortion. Since they couldn’t find one, they had to make one.
This is a 'basic' guide that allows you to methodically set up a guitar that has no major problems to begin with. This will not tell you how to do a neck reset on an acoustic, or shim an electric bolt-on neck for instance.The guide is cheap, effective and very informative, considering the pittance of a price being paid for it. This author obviously loves guitars and has a commendable desire to not only be able to make all the BASIC adjustments for themselves, but also to briefly and effectively explain WHY the adjustments work.
I do all my recording through my Axe FX, though there are many ways to USB record to computer. That being said, I plan to play live using my Ax and my other FRFR gear. I’m using a Matrix 1600-watt amp and a Matrix 2×12 (FRFR) cab and will run direct-out to PA when the time comes. I see no reason to lug around a half-stack or stack let alone the consistency and versatility of this setup. This is my first time using FRFR, and was tempted to go with a hi-end head and cabinet combo, but the up front investment will be worth it. I won’t ever have to buy effects pedals or change heads when I want a different sound. I did add a Mission SP-2 expression/volume pedal and also use my old Pod X3 Live for a midi controller. As for volume, I’m confident that my setup will hold its own vs. most other half-stack setups. I may add an Atomic CLR or another Matrix 2×12 (like the one I have) for a monitor later on. Another important factor is my band does cover songs and the Axe setup allows me to tailor my tone to match the bands we cover at the click of a switch. As a guitarist and computer tech/nerd, it doesn’t get any better than this for me. The configuration possibilities are endless.
I string up the guitar and tune it to standard pitch. Put the guitar in playing position and capo the first fret. I hold the 6th string down at the last fret as that is where the neck joins the body. Then I turn truss rod right (clockwise) until there is no relief hardly if any bounce at the 7th and 9th frets using the 6th string as straight edge, don't go too far just maybe a slight tiny bounce because you don't want to backbow the neck. Then I simply turn the truss rod left counterclockwise 1/4 of a turn for relief and that's it. Take capo off and set action at 12th fret with 6th string 5/64 and 1st string 3/64.
I have my El Maya EM 1300 ( El Maya Japan, Kobe instruments) since 1989 but it was built during the end of 1982 and EL Maya Strat version, guitars are neck trough body, amazing instruments they are better then any guitars i ever played maybe I'm not objective , only my US Hamer is close or on that level. Does Anybody have any El Maya? and that you maybe wish to sell it? More over what are the fer prices for the almost mint state of those guitars, regards miki.
Finally, the ’37 amplifier illustrated by both Sorkin and Grossman was the Supro Model D Amplifier, a little, dark-covered affair which – at 17″ by 91/2″ – basically looked like a little radio. It had a little metal “suitcase” handle, and the speaker was on the left side of the front. The circular grill hole was broken by two horizontal strips. This had five tubes, eight watts of power output, and an 8″ speaker. Inside were two compartments, one for the chassis and one for the speaker. The cost was $40. The Model D was made, again, by Webster and Bulwin in L.A.
Guitar pickups are quite heavily affected by the impedance of whatever they're plugged into. If it's a low impedance input, you'll end up with a muddier, flatter sound going into your amp sims. Ideally you want a high impedance input, and if the 6i6 isn't doing it a cheap-ish D.I. box will be the thing to go for. Behringer's got some that get the job done.
Bill Collings dropped out of medical school in the early 1970s and instead worked in a machine shop for five years. At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.
For larger venues such as stadiums and outdoor music festivals, or for music genres that use bass instruments with an extended lower range and high stage volumes (e.g., heavy metal music, grunge, hardcore punk), bass players often use a more powerful amplifier (300 to 2000 watts or more) and one or more separate speaker cabinets (often called "cabs") in various combinations. Using a separate amplifier cabinet and speaker cabinets is colloquially referred to as a "bass stack". An example of the powerful, loud bass amplifier systems used in grunge is Alice in Chains bassist Mike Inez's setup. He uses four Ampeg SVT-2PRO amplifier heads, two of them plugged into four 1x18" subwoofer cabinets for the low register, and the other two plugged into two 8x10" cabinets.
There is also a niche market for modifying or "modding" effects. Typically,[according to whom?] vendors provide either custom modification services or sell new effects pedals they have already modified. The Ibanez Tube Screamer, Boss DS-1, Pro Co RAT and DigiTech Whammy are some of the most often-modified effects. Common modifications include value changes in capacitors or resistors, adding true-bypass so that the effect's circuitry is no longer in the signal path, substituting higher-quality components, replacing the unit's original operational amplifiers (op-amps), or adding functions to the device, such as allowing additional control of some factor or adding another output jack.
There’s 2 very small and cheap amps that are widely used by guitarists and by guitar technicians across the globe and the Marshall MS-2 Micro Amp is one of them. The other is number 2 in our list, before you ask… This tiny 1-watt Marshall amplifier may fit in the palm of your hand, but it sure packs a punch and is a LOT louder than you’d expect. Styled just like the classic Marshall amplifier stacks now synonymous with rock n roll, this is one of the best cheap amps thanks to its convenient size, 9V battery powered operation for ultimate portability and the fact you can plug your guitar into it and rock out anywhere you like.
I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.
PICK GUARD - KRAMER 450 - LO GIBSON - GOLDTOP - GIBSON SG CUSTOM SHOP - THUNDER JET - TAKAMINE - GIBSON 1959 - 450 12 - 66 ES-330 - 1972 - HAGSTROM F-300 RED LEFTHANDED - GIANNINI - BALLADEER - WHITE LES PAUL - HAGSTROM BRIDGE - CONRAD - LES PAUL 1953 - PROJECT - WASHBURN EA27 - KALAMAZOO KG - FRAMUS BASS - BASS VI - 1967 - ES-330 - HOLLOW - 1981 LES - BALDWIN BABY BISON - STELLA ACUOSTIC - MARTIN N-20 - VAN EPS - LES PAUL RECORDING - PIG - MARLBORO - HAGSTROM F12-S - FENDER STRATOCASTER 63 - LS 6 - HARMONY - J-45 - UNIVOX BASS
One thing to point out here. When you take the strings off a Les Paul, there is (usually) nothing holding the bridge or the tailpiece on, so be careful with this. That said, I do want to mention that while the strings were off this guitar, I took the opportunity to lower the tailpiece. I prefer the tailpiece to be lowered all the way to the body if possible. Many believe that this will give you better tone/sustain, although it's hard to prove such a thing scientifically. That said, there is very little reason for the tailpiece to be anywhere other than as low as possible anyway.
You didn’t think we would forget bass amps, did you? Due to their inherent differences in design, bass guitars require a dedicated amplifier – using your old Fender Champion isn’t going to cut it. Bass amps offer more power, with some outputs reaching 1000 watts or more. Like guitar amps, bass amplifiers come in many shapes and sizes – including heads and combos – although the mid-range Hartke HD500 offers a stage-worthy 500 watts of power in a portable combo unit, with great controls and an excellent balanced tone.
This is a product of Colorado USA, every detail of this guitar was hand painted with waterproof organic non led based paint. It is brand new fully functional acoustic guitar. Become the center of attention on your party with this beautifull vibrant instrument. Perfect for a present (Christmas, Valentine, or b-day) for your loved one, family or a friend. Come in to the magic world of music with this beautifull hand painted acoustic guitar. Fill the positive energy of Marcy's artistic story through your song. The artist Marcy Snow all the way from Colorfull Colorado presents you this unique hand painted acoustic guitar .
Luthier Steve Lamb has been providing quality instrument repair in Fort Worth for over 30 years. Steve’s years of experience has provided musicians, collectors, students and friends the information and service necessary to keep their instruments in shape. Lamb’s Music is an authorized service/warranty center for most guitar manufacturers including – Fender, Gibson, Martin, Taylor and more.
Above all, enjoy playing guitar and enjoy the journey! Look forward to 3, 4, 5 years down the line when, if you've been persistent with your practice time (and allowed plenty of time for noodling), you'll have accomplished so much. This is all about freeing up your creativity, bit by bit, so you can express yourself on guitar as naturally as you can with speech. Doors will open all throughout your progress. Each new door that opens is like a new outlet for your creativity.
It’s the knob that controls a potentiometer (informally a “pot”) which acts as an inhibitor of sorts (when used in conjunction with a capacitor), bleeding off the high end frequencies of a guitar’s pickup (or pickups) signal that has passed through the volume control and is on it’s way out of the guitar, giving it a “warmth” (think muffled-ish) sound.
Some guitarists use identical pickups in each position and still get contrasting sounds from each pickup. Others use different types of pickups, often to balance the tonal tendencies of a particular pickup position. For example, a guitarist might choose a moderate-output pickup in the neck position and use if for clean-toned chords, but opt for a high-output bridge pickup for a louder, more distorted, solo sound. A pickup of that type will probably sound darker than a single-coil, but a player who finds the naturally twangy bridge position a little too bright would welcome that change.
James Valentine of Maroon 5 has a strong idea of what he wants in a guitar and so, along with the craftsmen at Music Man, has created his dream machine. Valentine's desire was for a guitar that blends innovation and a modern vibe, with a reassuringly classic appeal - a bit Gibson semi, a bit Fender Tele perhaps. So, with that in mind, an ash body - in this instance finished in what Valentine calls 'Trans Buttermilk' ('Trans Maroon' is, of course, available, too) - has been mated to a nutty-looking roasted maple neck. This is delightfully figured and comes with Music Man's proprietary wax and oil finish for a tactile but drag-free experience. Build and finish are, as always, dead on. Pickups and controls are interesting: while both pickups are standard humbucking size, the bridge unit is actually single coil, its pole pieces slanted like a Tele or Strat across the chrome cover. Controls are simple, but with a couple of neat twists in the form of push-push pots on both controls - an active boost of up to 20dB on the volume, and a coil-split for the neck humbucker on the tone. We like the 'hidden' nature of these sonic extras, because it adds genuine usability but keeps things uncluttered and intuitive. The Valentine looks familiar but just different enough, feels great sitting or standing, boasts a real player's neck, and its palette of tones - delivered in a fuss-free manner by a clever control and switching setup - is simply superb. Of the hundreds of models that have sought to blend humbucking and single coil tones, this has to be one of the best electric guitars.
A real hall-of-famer from Ibanez, which displays true rock style and lightning-fast playability in an affordable beginner-friendly package. With the classic Superstrat body in a range of colors, this RG is made of solid basswood and features a slick, thin Wizard III maple neck, with rosewood fretboard and 24 jumbo frets, making it superb for chugging powerchords and fast soloing.
Guitar from Spain is the best online store to buy the best spanish guitars online: Classical guitars, Flamenco Guitars, Acoustic Guitars and electro acoustic guitars made in Spain from the best spanish guitar makers at spanish local prices. These unique guitars will be delivered from our warehouse or from the manufacturer's bench to your door, avoiding extra costs or double margins. Because we only sell guitars from the most reputable Spanish manufacturers, you will be assured to buy only the best spanish guitars available with 2 years warranty and certified from origin. Spanish guitar brands like Alhambra Guitars, Raimundo Guitars, Ramirez Guitars, Admira Guitars, Camps Guitars, Rodriguez Guitars or Prudencio Saez Guitars are among the most reputable and best sounding guitars in the world. These guitars are manufactured in Spain, the land of the flamenco guitar and the classical guitar. At Guitar From Spain you can also buy steel stringed acoustic guitars, western guitars and electro acoustic guitars made with the same traditional craftsmanship and know how acquired through centuries of guitar making. We also have special guitars as Bandurria (Spanish mandolin), Laud (Spanish lute), Cuban tres, timple canario and special sized guitars as Cadete (guitar 3/4) Requinto (Guitar 1/2) and Senorita (Guitar 7/8). Compare our Spanish Guitars with any other "asian made guitars" at the same price and you will be amazed with the diference in quality and sound that you can get. Do not settle for imitations, buy the original, buy Guitars from Spain.
Play your guitar a while like this, and notice how much more ring, richness, and sustain you get out of it. The strings should now vibrate for close to the full potential of the instrument (which, of course, also depends upon factors such as nut and bridge type and condition, body style, neck and body woods, and so forth). Put simply, your tone is likely to sound bigger and fuller, and to bloom with a broader voice and a longer note decay than previously. If this as-high-as-you-can-hack-it setting is a little too much for every-day playing, try backing the strings down a hair at a time, and hopefully you can find a height that offers a healthy compromise. Sure, it’s also possible you preferred it the way it was before you adjusted it at all, and if your playing style involves a lot of speed riffing, hammer-ons and pull-offs, or extreme bending, you might simply require that as-low-as-it-goes actions (and will very likely mask its drawbacks with some judicious high-gain tone). With any luck, though, you’ll have discovered an easy means of achieving a fatter tone, without purchasing or modifying a single thing.
Originally equipped with P-90s, it wasn’t until 1957 that the most significant change was introduced: humbuckers. Humbucking pickups—two-out-of-phase coils wired together to cancel or “buck” the hum produced by single-coils—weren’t a new concept. But Gibson technician Seth Lover’s refined PAF (patent applied for) humbuckers produced a higher output with a clearer, fuller tone that solidified the Les Paul as the classic we know it as today. From Goldtops to Black Beauties and the ever-iconic sunbursts, Les Paul guitars come in almost limitless varieties, making them a staple of blues, jazz, rock, soul and country.
Daron Malakian (b. 1975) is the lead guitarist for System of a Down. During the System of a Down era, Daron played IC200's and IC300's on stage. During the Toxicity era, Malakian played a variation of the Ibanez Iceman ICX, with custom artwork designed by his father, then a special edition "DMM1" was released by Ibanez. The DMM1 featured more artwork by Malakian's father, Vartan Malakian (b. 1947). After using Gibson guitars for 5 years, Daron switched back to Ibanez and began using an Iceman again.
The Wire. You'll see a lot of vintage spec wordings bounced around here and that pretty much boils down to the aesthetics. Those early Fenders and Gibsons we all know were wired at the original factories with a cloth covered 'push back' wire, whereas as some modern factories, far east predominantly use standard plastic coated wire today. But the important detail is the 'AWG', or American Wire Gauge. Widely used in the guitar world for optimal results, is 22AWG wire. I would go into detail on this, but THIS site has some superb facts about AWG, which if you'd like to find out more I'd recommend a read of! So back to the cloth/plastic thing. Personally, the 'push back' cloth wire is much easier and tidier to work with and I fully hold my hands up to saying it looks much better too. I always use this for any guitar wiring, the results are always great and it's a pleasure to wire up with. I personally use 22AWG copper, solid core wire, great to work with and consistent.
Here we have a wonderful made in Japan Takamine from a while back in 1990 this makes it officially a Vintage guitar next year but its tone sounds rich and vintage now! As you will see looking her over this F349 is GORGEOUS!.... better than average condition in all aspects... few only minor doinks here or there but NOTHING to detract from this Taks sound - playability or sheer playing enjoyment... Excellent ALL Mahogany build construction, high AA grade mahogany, masterfully built - fit and finish excellent, neck angle is excellent so action is very good so playing is a breeze and quite enjoyable not all can state this...its 1-11/16ths at the nut so its a nice feeling medium profile " C " shape, frets are very good - excellent can barely tell its been played in fact if you polish them they will be as new...beautiful quality rosewood fingerboard no dead spots or funny buzzes noted...This guitars wood still shines like glass and overall is an outstanding original example with an addition of the best sounding Piezo transducer cleanly installed if I didn't tell you -you may not have noticed but she is also fully electric and sounds amazing amplified I played her threw my Princeton Reverb amp and it truly sounds bold & rich and rings like a bell with the newish Martin strings I installed (I have played this guitar in my office for a short while ) so they should be done stretching and are clean and ready to perform. This guitar is nearing 25 years old so don't expect a brand new guitar this is a beautiful vintage guitar and has personality and patina of a well treated well loved professional grade instrument. Its in excellent vintage condition. JVG Rated 9/10. If you want a rich sounding great playing fun vintage Japanese Dreadnought guitar well this one should put a grin on your face when you open her up and see it. Enjoy! Let me know if interested thanks for looking. Joe contact us at: JVGuitars@gmail.com.
Reverb pedals come with all kinds of different layouts. Even so, some of the controls are virtually universal. The first one we would like to mention is the dry/wet knob. This control is what you use to mix your original signal and the effect itself. When the knob is turned all the way to dry, there will be zero reverb present in the signal. As you move towards wet, the amount of reverb increases.
The Takamine F-340 was the cause of a letter from Martin Guitars in the early 1980s because Takamine’s acoustic guitars including the logo design were supposedly nearly identical to Martin Models. According to Chris F. Martin IV, CEO of CF Martin and Company in a speech given to the Unofficial Martin Guitar Forum members on August 8, 2005, no lawsuit was ever actually filed, and Takamine did change the appearance of their guitars.
The D-120's all-mahogany body strays from conventional spruce top design, which results in a warmer and more articulate tone. This particular tone is ideal for guitarists who sing, and for those who accompany vocals, it also blends well with conventional spruce top acoustic guitars, easily cutting through the mix with its lower-mids emphasized voicing. And since the body is crafted from solid mahogany, you can be sure that the instrument grows with you, sounding better with age.
My dad has an old Norma classical 6 string from the 70s.I've been told it was a cheap brand and not especially remarkable,but his is still holding up and still sounds good.It had to have a neck repair many years ago,but still plays well.I'm not sure what the tone woods are.The neck,back and sides are dark,like mahogany,the top is very orange and kind of ugly.
The next most important review criteria for any electric guitar, is its sound. Please allow me to be very clear here that this guitar is mostly suited for heavy rock tones, aggressive higher leads and chugging, crazy distortions. If you are more interested in a crisp, jazzy tone, maybe you should opt for a beginner’s Stratocaster electric guitar like Squier by Fender, instead. Having said that, this instrument sounds great in its genre, and also remains in tune for long periods, so you don’t have to worry about manually tuning it. Yes, the string tension is higher as compared to a 24.75” Stratocaster or XX Les Paul, but in a way this challenges electric guitar novices to acquire greater mastery over their notes!
Spruce has historically been the wood of choice for acoustic flat-top guitar soundboards. However, Luthiers and other large guitar manufacturers very often choose more economical and readily available woods rather than top-quality spruce. Redwoods and cedar, for instance, are often used in soundboards by American guitar-makers to great effect. In some cases, two different woods are used together to give the guitar a distinctive appearance and tone.
The Broadway by Epiphone features a laminated maple body with a select spruce top, producing a bright sound rounded up by the warmer tone of the spruce. It also has a hard maple neck with a Slim Taper C profile, a rosewood fingerboard with block-and-triangle abalone inlays, binding on the headstock, body, fingerboard and around the F-holes, a mother-of-pearl Tree of Life inlay on the headstock, gold hardware, a three-way pickup selector and an adjustable floating tremolo bridge.
Hendrix was known for a lot of things.The beautiful chord embellishments on Little Wing, the grit of the solo in Voodoo Child screaming off of his strat pickups, his cover of the Dylan song All Along The Watchtower, and the backwards solo in Castles Made of Sand, but known as a great innovative guitar player over and over again. His short but explosive career influenced numerous artists for many years past his death and continues to influence musicians today. To make such a difference in such a short amount of time truly earns Jimi a spot as number two. But…then you may ask, “Who is deserving of number one?!”
Founded in 1976, Schecter Guitar Research started out by producing replacement parts for existing guitars of the era. They then took the production a step further by custom building guitars, and have grown steadily ever since. Today, Schecter is known for their extensive line of mass produced electric guitars, and their instruments are well received in the rock, punk and metal circles.
Ibanez is one of the first Japanese musical instrument companies to gain a significant foothold in import guitar sales in the United States and Europe, as well as the first brand of guitars to mass-produce the seven-string guitar and eight-string guitar. The company has an impressive lineup of products ranging from instruments to pedals and accessories.
If you have your heart set on a Stratocaster, but can’t justify shelling-out $600 or more for the USA-made Standard Strats, the Squier Standard Stratocaster is a great place to start. Unlike the even cheaper Strats that are included with Fender’s “starter packs,” this guitar is a definite step-up in quality and features a more modern take on their traditional bridge. I personally prefer this bridge style over Fender’s traditional/vintage 6-screw bridges.
O.K. These are my first impressions of this guitar kit, my first, right out of the box. About me: I own about a dozen guitars, both acoustic and electric, including 6 string and basses. I know a little about construction, as I have been studying, and have been wanting to build my own guitar for some time now. Building from scratch seemed a little optimistic so I elected to go with this kit after studying the Internet for days. I wanted a chance for a great result with my mediocre woodworking skills. Kit arrived quickly and undamaged, good packaging and the components were bagged nicely.
These guitars work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Semi-hollowbodies are noted for being able to provide a sweet, plaintive or funky tone. They are used in many genres, including blues, funk, ’60s pop and indie rock. They generally have cello-style F-shaped sound holes, though these can be blocked off to prevent feedback, as in B.B. King's famous Lucille.