The characteristics of your Kingston are very similar to what other owners have reported: occasional scratchy and erratic performance of the electronics, intonation problems, and action that is hard to control (notably due to the lack of a truss rod). Although I can’t verify this, one estimate indicates that over 150,000 Kingston guitars were sold in the U.S. during the 1960s! It’s obvious that quantity trumped quality when it came to producing the guitars, and it isn’t surprising that the electronics have some issues after all these years.
That is, if the tone caps in parallel filtered from within th 1k-2k and 3k-5k frequency band with the pot determining how much of those ranges are filtered off, then moving the 2nd cap parallel to the pot should shift the 2k window of the bigger cap so it would be filtering less of the 3-5k at one end of it’s sweep, and more of the 1k-3k filtered at the other end of it’s sweep. (my frequency selection and math here are conceptual only, and not to be taken as accurate measurements).
Effects such as chorus, phasing, flanging and pitch vibrato are created using pitch modulation and, except in the case of vibrato, the modulated sound is added back to the original to create the effect. The pitch modulation is generated by delaying the signal by just a few milliseconds, and then modulating the delay time, using a low frequency oscillator (or LFO). For vibrato, this is all that needs to be done and, because the delay time is actually very short, the effect is perceived as happening in real time. The other effects, however, generally rely on an equal balance of the dry and modulated signals to achieve the strongest effect, so it is easier when working with plug-ins to adjust the wet/dry balance using the plug-in controls, rather than adding the wet only signal via a send/return loop. As a rule, these effects aren't very processor-intensive so, if you're working with plug-ins, you can probably afford to insert as many as you need into track or bus insert points as required. Stereo versions of these plug-ins may generate different modulated delays for the left and right channels to create a more dramatic spatial effect.
Besides instrument inputs and speaker outputs (typically via 1/4" jacks), an amp may have other inputs and outputs. These can include an auxiliary input jack (sometimes with its own level control, for a drum machine), "send" and "return" jacks to create an effects loop, a “line out” jack and an extension speaker jack. Practice amps sometimes have a 1/4" headphone jack, or stereo RCA or mini jacks for connecting a CD player, portable media player or other sound source. Some guitar amps have an XLR input so that a microphone can be plugged in for singing. Guitar amps that include a mic input are in effect small, portable PA systems. Some amps, typically bass amps, have an XLR connector to provide a balanced output from the preamp section to go into a PA system or recording input.

The list of musicians who are (or who have been) in love with their vintage Fender Bassman amps—especially the 4x10 tweed variety made between 1957 and 1960—is pretty much endless. Just for starters (past and present), there's Eric Clapton, Buddy Guy, Mike Campbell, Mike Bloomfield, Jimmie Vaughan, John Fogerty, Josh Homme, Brian Setzer, the guy up the street from me... . Again, this is just the tip of the iceberg, people. After all, many professional music industry analysts have heralded Fifties 4×10 Bassman amps as the greatest amps—ever.

We’ll talk more about the sound quality shortly. To give you a gentle introduction, Line 6 has been in the amp and effects modeling game for a long time. Their POD line of guitar effects processors has been around for a while, and you might be familiar with their Pocket POD. Some of you might also know them for their extremely popular digital delay pedal and looper, the DL4 (an absolute mainstay on pedalboards everywhere). Line 6 makes several multi-effects units, and according to the research we did the POD HD500X (from their POD HD X series) is the one mentioned and recommended most often. They make a rack-mountable version of it, but we’re more interested in the floor pedal unit. This is a multi-effects pedal, amp simulator, incorporates an expression pedal, tuner and looper, and doubles as a USB audio interface, just to name the basics.
The Supro brand name was introduced by the National-Dobro Corporation to sell its less expensive electric instruments. The first Supro Spanish and Hawaiian guitars appeared in 1936, and the brand would thrive until the bankruptcy of Valco in 1968. (The modern Supro line of amps bears no relationship to the original brand name). By the end of the 1930s, a pattern was established that would last for the next 30 years: Supro guitars and amps would generally be more affordable than their closest National counterparts, but built to similar quality and sometimes incorporating features not found in any National. Supro instruments were sold through a much less exclusive network of dealers than National, and as a result they have acquired a name recognition that surpasses their “superior” siblings.

Unfortunately, no reference materials were available for this early period, so we’ll make some educated guesses. Based on the evidence of the logo on the 1968 amplifier, we suspect Univox guitars with the plastic logo debuted at about the same time. By 1970, Univox was employing decal logos on some models, further corroborating this conclusion. If this assumption is correct, it would suggest that among the first Univox guitar was the Mosrite copy known later as the Hi Flyer, debuting in around 1968. This would be consistent with the evolution of “copies” in Japan. As the ’60s progressed, the Japanese were getting closer and closer to the idea of copying, producing guitars similar to their competitors, such as Italian EKOs and Burns Bisons, etc., finally imitating American Mosrite guitars in around ’68. The Japanese affection for Mosrites was no surprise, since the band most associated with Semi Moseley’s guitars was the Ventures, who were enormously popular in Japan.
A common acoustic body style that makes use of a very large soundboard is the dreadnought. Dreadnoughts are distinctive for their square bouts, wide waists, and 14-fret necks. The first dreadnought was developed in 1916, and it has been gaining in popularity ever since. Dreadnoughts are very popular among bluegrass guitarists due to their powerful, driving sound.
So the most likely answer here is to increase the height of that side of the bridge a little. This may mean the 5th and 4th strings are a little higher than absolutely necessary, but it's always about compromise with these things (unless you want to individually file down the heights of each of the saddles, but I'd advise against doing that until you really know what you're doing).
There’s plenty of substance under all that style, too. Two DiMarzio-designed Fusion Edge humbuckers power the S series axe—they aren’t exactly after-market pickups, but are designed in collaboration between Ibanez and the pickup brand. These ceramic humbuckers are aggressive, articulate and loud, ideal for modern metal. And for a touch more versatility, both pickups have also been coil-split.
On December 22, 1969, the Gibson parent company Chicago Musical Instruments was taken over by the South American brewing conglomerate ECL. Gibson remained under the control of CMI until 1974 when it became a subsidiary of Norlin Musical Instruments. Norlin Musical Instruments was a member of Norlin Industries which was named for ECL president Norton Stevens and CMI president Arnold Berlin. This began an era characterized by corporate mismanagement and decreasing product quality.
However, when I’m building a guitar, there’s a myriad of small adjustments I can make to steer the instrument on a desired trajectory. These micro mods are interactive with each other and, depending upon the combination, offer a wide variety of sonic outcomes. But these little mods can also be applied to existing guitars—your guitars—in any number of permutations and to great affect. Let’s take a look at five mods that are easy enough for most players to try.
You asked, and you shall receive, Sonicbids blog readers. Per multiple requests, here's my guide to, "When the hell do I start turning these knobs, and where do they go?" But before we begin, I offer you the fine print: These references are general ideas for where to begin to look for sonic issues with particular sounds, instruments, and voices. I'm not going to tell you "always notch this 9 dB here and add 3 dB here with a wide boost and, voila, perfect sound!" because it's unfortunately just not that simple. So before you message me, "Aaron, I notched out so much 250 Hz out of my snare, I snapped the knob off the console, and it still sounds muddy!" just know that not all sound sources are created equal.
{ "thumbImageID": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst/L21533000005000", "defaultDisplayName": "Fender Player Stratocaster Maple Fingerboard Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst", "sku": "sku:site51500000219387", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst-1500000219387.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst/L21533000005000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000219385", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black-1500000219385.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black/L21533000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Polar White", "sku": "sku:site51500000219381", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Polar-White-1500000219381.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Polar-White/L21533000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Buttercream", "sku": "sku:site51500000219388", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Buttercream-1500000219388.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Buttercream/L21533000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tidepool", "sku": "sku:site51500000219384", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Tidepool-1500000219384.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Electric-Guitar-Tidepool/L21533000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Ok so currently i run a Mesa 20/20 along with a GSP1101 and a MXR 10-Band EQ pedal. I love the MXR but would like to get a EQ in rack form. I see about a millon rack EQs out there but not sure which ones are made for guitar? They seem more focused on live sound/PA/Home recording..I am not sure if there all the same, Meaning a PA EQ will work for a guitar rack. 

As an aside, people talk about “gold foil” like it’s some sort of rare mineral!  I see auctions all the time dropping words like “GOLD FOIL” pickups, and “As played by Ry Cooder!!!”  So far, I’ve identified 12 different kinds of pickups that had gold foil somewhere on them, and many of them are made differently!  What’s the point?  Don’t buy the hype!!  You have to play these guitars, or check out our videos to get an idea pertaining to sound.  Poor Ry Cooder gets attached to every darn gold foiled guitar ever made, geesh!  And I don’t even know who Ry Cooder is!
Several neck shapes appear on guitars, including shapes known as C necks, U necks, and V necks. These refer to the cross-sectional shape of the neck (especially near the nut). Several sizes of fret wire are available, with traditional players often preferring thin frets, and metal shredders liking thick frets. Thin frets are considered better for playing chords, while thick frets allow lead guitarists to bend notes with less effort.
According to the laws of electromagnetism, whenever an iron coil is moved inside a magnetic field, an electric potential is generated in the iron coil. This arrangement is known as an electromagnet. An electric guitar uses the same principle for generating an electric signal using small electromagnets which is then rectified and amplified to reach an appropriate audible sound level.
A great debate has raged hot and heavy throughout the guitar playing world since George Beauchamp and Rickenbacker invented the electric guitar. It's a debate that's ignited feuds, torn apart families and has surely broken some hearts and continues to this day. What debate drawn from the innocent depths of guitardom could illicit such a foul and unexpected response?
The questions I get asked in response to people reading my stuff on guitar wiring often relate to the 5-way pickup selector switch so I thought I’d write a brief explanation of how it works. Understanding how the 5-way switch on your guitar works is key to successful guitar wiring. Knowing what goes on inside the switch may sound like a simple, maybe trivial, detail but it’s something we all need to understand and it’s not as easy as it first seems.
Guitar Center Fort Worth provides comprehensive guitar repair services for the Fort Worth area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Fort Worth can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
Every new 2008 Les Paul Standard will benefit from Gibson’s proven chambering technique, which leaves each guitar with perfect tone, balance, and weight. Prior to gluing the maple cap on top of the mahogany body, the expert craftsmen at Gibson USA carve out carefully mapped-out chambers in the body using a Computer Numeric Controlled (CNC) router. The positioning of the routes was established after careful examination of the resonant characteristics of the Les Paul. Gibson approached this process with the awareness that every change to the formula would have repercussions on the instrument’s sound. So, in addition to relieving the stress on a player’s back and shoulder, these lighter Gibson guitars also enhance the tone palette in a manner unique only to these guitars. The results are comfortable, lightweight guitars that are acoustically louder, with increased sustain and resonance.
If this is your first time picking up a guitar you may not have seen chords depicted the way they are below. You can find out how to interpret the chords by looking at how to read chords. Each of the chords below shows the chord notation and a picture of a hand forming that chord on neck for your reference. This notation is the common way for showing chords, you may find guitar songs depicted differently elsewhere. This is usually the tablature notation. Here you can find more information on reading tablature notation.

Reverb's Free Online Price Guide: This specialty vintage guitar site is one of the largest, most carefully maintained used vintage guitar and bass shops on the internet. It sells hundreds of used guitars and basses of all makes and models. It offers a free online Price Guide where you simply type in the model of instrument you have, and Reverb will analyze its vast database of transactions and give you a large result filled with prices. This gives you a real-time look at the market and where your particular kind of instrument fits in. It is a living, breathing blue book, and (the best part) it is free.

Out of all the hopped-up Caucasians who turbocharged the blues in the late Sixties, Texas albino Johnny Winter was both the whitest and the fastest. Songs like his 1969 cover of "Highway 61 Revisited" are astonishing showpieces of his lightningfast thumb-picked electric slide playing. Jimi Hendrix sought him out as a sideman, and Muddy Waters recognized his talent at first glance, becoming a friend and collaborator: "That guy up there onstage – I got to see him up close," Waters later said. "He plays eight notes to my one!"
What style of music do you play? While there are many versatile guitar amps that can be used for many styles of music, if you play a particular style of music a majority of the time, then you should get an amplifier that best suits it. Do you play acoustic or electric? Certain guitar amplifiers are designed specifically for acoustic guitars although it is possible to play an acoustic through any amp. In terms of styles, jazz players typically do not need an overdrive option as clean tones are best suited for that style of music. Blues aficionados will be happiest with a clean channel plus an overdrive channel with plenty of sustain, such as one finds on many vintage Fender models. Shredders will require an amp that will accept distortion pedals without losing signal quality. Do your research regarding which guitar amps are best suited for the type of music you play.

In fact, it’s the same hand-fabricated bobbin, Alnico II bar magnets and plain enamel mag wire that featured on the original. And with a similar construction comes a similar vintage P-90 tone, with plenty of brightness and bite. Available in both bridge and neck models, the Antiquities look the part too, with authentic-looking aged black plastic dog-ear covers.

The Chapman ML2's classic, single-cut body, two chrome-plated humbuckers and a black pennant headstock that’s not a million miles away from Gibson’s Les Paul. But appearances can be deceptive: this instrument is a very different beast. Chapman pegs its weight at a relatively svelte 3.5kg, so it’s unlikely to see you turning over your salary to the chiropractor. It’s also heavily contoured with its cutaway and heel carved for easy access to the upper frets. It has a modern, satin-smooth C-profile neck, hewn from maple (another deviation from the LP blueprint) and glued neatly to the body. The 25" scale lends it a unique feel - and with 24 jumbo nickel frets, the ML2 Modern is hugely shreddable. Both pickups feature an Alnico V magnet at the heart (think tight low-end, brightness, a little less on the mids), but with a coil-split, accessed by pulling up on the master tone pot, you can split the signal of these humbuckers for some single-coil snap and sizzle. The ML2 Modern makes a good claim on being all things to all guitarists. With coils split or not, we love its tone. That bridge ’bucker really sings with some gain. While the neck pickup is a great ‘rhythm’ humbucker - articulate and dynamic. Whether you find the modernity in its versatility, or in a feel that’s more Jackson than Gibson, the ML2 Modern sure lives up to its name.
Blueridge Historic Series BR-160 Looks good, sounds even better. Blueridge’s BR-160 celebrates the company’s rich history, which is reflected in the guitar’s vintage dreadnought design. The warm, mellow sound it produces also takes you back to the good ol’ days way before the internet came along. Having this guitar is just like having a piece of history in your hands.
Our congratulations and deepest thanks on making Ibanez your choice of instrument. Ibanez standards are second to none. All Ibanez instruments are set up to our strict quality control standards before shipping. The purpose of this manual is to explain how to maintain your instrument’s finish and to keep your guitar playing as well as it did when it...
A middle ground between solid and hollow-body guitars, semi-hollows are hollowed out but have a solid block of wood running through the center of their bodies. This achieves the increased sustain and reduced feedback of a solid-body guitar while retaining the mellow tones of hollow bodies. For this reason, semi-hollow guitars became exceedingly popular with blues players like Chuck Berry and Freddie King. Their duality — sweet and mellow but also some awesome, crunchy sounds — makes them great all-purpose guitars with classic sound.
Traditionally, the vast majority of professional engineers prefer to record electric guitars through a mic’d up amplifier, rather than use a DI (direct injection) box, even though specialist guitar DI units are readily available. That said, there are many pracitcal reasons to split the signal from the guitar and use a DI box in conjunction with an amp. If you find out later that the recorded amp sound doesn’t work in the mix, or you wish you hadn’t committed a particular effect ‘to tape’, the pure guitar sound can be re-amped and subsequently reprocessed without the need to discard a great take. You can route the DI’d signal through a modelling plug-in and blend that with the mic’d amp sound, too.
1960's Harmony H-54 Rocket 2 Redburst- Here's another excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. There's just limited amount of wear on tips of headstock with a amlost perfect back. Two great sounding DeArmond Gold Foil Pickups power this baby. Guitar has a 4 bolt neck which was the better neck from Harmony. It's all original, except for the pick guard, which no one can detect. Condition excellent for this great 50 year old beauty. SOLD

In 2017, Slash was named Gibson Brands' first Global Brand Ambassador. And to celebrate, Slash has designed his first Signature Firebird for Epiphone! Slash's Limited Edition Firebird features the classic Firebird profile that has gone virtually unchanged since its debut in 1963 and is made with a AAA Flame Maple top and a 3-piece Mahogany body in a Translucent Black finish chosen by Slash.
We have done hundreds of guitar 'set-ups' / repairs / restorations over the years and know how to do them to a degree that 95% of 'players' will be very satisfied. We're not just changing strings and polishing. We'll check and adjust the neck for correct string height at the 7th fret (should typically be about the thickness of a .010 gauge 'E' string when fretted at the first fret and the 12th fret). We also check for a 'body bump' in the neck as if that can't be addressed to a 'playable' degree, then the balance of the adjustments will be for naught. As we're in a very dry climate, we will check for 'fret overhang' due to neck shrinkage and 're-dress' the frets accordingly. If it's a 'bolt-on' neck, we'll check for neck joint / screw integrity and repair as necessary. We check and adjust for correct intonation using our 'Peterson' strobe tuner and our other 'analog' tuner. Electrics are typically intonated with 'fresh', .010 strings installed (if you want it intonated with a different gauge, just let us know). We inspect and test the electronics, especially looking for any 'aftermarket' re-wiring / mods / incorrect repairs. We inspect the integrity of the tuning machines and repair as necessary. Of course we do all the standard cleaning, adjusting and test playing once the 'basic integrity' of the instrument has been addressed.
For the most part, you might want to get a preamp that has at least some type of EQ on it. Tone shaping on an acoustic electric guitar can really give you an edge or at least a semblance of control before the sound guy butchers it during your gig, although you can do this with an effects pedal. Even though this is something that takes the time to learn, it's better to have the option readily available when you decide to step up to that level.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Blue
Learning how to play guitar on an acoustic style guitar brings about the benefit of forcing you to learn better habits at the beginning rather than unlearning them later, which is exponentially harder to do, because they're a bit more unforgiving about hiding your errors, especially because you won't be hiding behind a string of distortion and reverb pedals.
First, plug your guitar in and toggle all the switches and knobs. If your guitar still plays fine, the connection problem is internal. Second, for non-Stratocaster style guitars, remove the cavity covers on the back of the guitar. Strum the strings and move the wires that are soldered to the switches, pots, and output jack. You will probably find your loose connection when the guitar cuts out again. For Stratocaster style guitars, you will need to remove the pickguard and manually check each connection point to make sure the solders are solid. Third, re-solder the loose wire and screw the cavity covers or pickguard back on. For more information about how to solder wiring, see the soldering page.
Description: Body: Koa - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Rosewood - Binding: White Sparkle - Frets: 22, Jumbo, Medium - Inlay: Thumbnail - # of Strings: 6 - Scale Length: 24.6" (62.5cm) - Headstock: 3+3 - Bridge: Rocking Bar - Bridge Construction: Ebony - Cutaway: Single - Hardware: Grover Romantics Tuners, 3x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: FilterTron - Pickup Configuration: H-H - String Instrument Finish: Flamed Koa

Most lo-fi amplifiers in the 40s and 50s produced unexpected distortion or overdrive tones at higher volumes. Guitarists quickly discovered that the Fender Tweed Champ (originally marketed to beginners as the Champion 800 in 1948) produced a distorted sound at high-volume levels thanks to the Champ’s low power output and simple circuitry. Many of the classic guitar solos in the 1950s were recorded through a Champ, which resembled a wide-panel TV cabinet covered in tweed cloth. Leo Fender even went so far as to manufacture the first 100-watt amplifiers for surf guitar pioneer Dick Dale, who had blown hundreds of Fender amps and speakers from regularly turning up the volume.
From the 1920s to the 1940s, upright bass players who wanted to strengthen the acoustic sound of their instrument had to use small portable PA systems or guitar amp combos designed for acoustic guitar or archtop guitars. Since these systems were not specifically designed to amplify bass instruments, it is unlikely they provided good low-frequency sound reproduction (particularly guitar amps, which are not designed to go down as low in pitch as the low E (41 Hz) and A (55 Hz) strings). In the early 1920s, it was very hard for an upright bass player (indeed for any musician) to find any amplifier and speaker system to make their instrument louder. The only speakers that could be bought during the early 1920s were "radio horns of limited frequency range and low acoustic output", and the cone speaker (which is widely used in modern-era amp cabinets), was not offered for sale until 1925. The first amplifiers and speakers were PA speaker setups; while an upright bassist could potentially have used one of these early PA systems, they could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
In the fall of 1964, it's generally accepted that hide glue was replaced with white polyvinyl acetate PVA glue (Elmer's) after the move to the new Martin build facility. (But hide glue was still used until the mid-seventies for gluing tops to the rim and in some other situations.) A notation was written in Grant Remaley's personal memos on Sept 29, 1964 indicating Martin was starting to use "cold" glue. It is generally thought the type of glue used does affect the sound of the guitar. Starting some time in the 1980s Martin started switching from white glue to yellow aliphatic resin (titebond).
Flawless build, the action is set up so well I don't see any need to tinker with anything. Pulled it out of the box, tuned it and strummed a few chords, then set it aside for 24 hours. Re-tuned it the next day and it has stayed in tune. I cannot find anything amiss or out of place on this one. Per the serial number, this is a 2015 Indonesian build. The wood is simply perfect in appearance and the tone is outstanding for a thinline. Yeah, I am happy with this one. Recommended.

you put in a lot of work, its not biblical correct, pretty good...but take with a grain of salt. but some guitars are made in Korea. I bought a Yamaha 3 piece back like a Kiso Suzuki, I would it was made in Japan The tuners said made Japan. I thought the pawn shop was crazy. I got it for $100 Love this guitar and then one day I looked at the the decal in the sound hole and in the tiniest print "Made in Korea" I felt a pang like o' crap I bought a Korean guitar. But I have a few Acoustics High end a Guild made in the 80's and this Yamaha is incredible. better or just as good as my old Suzuki

Now that we’re comfortable with the basic wiring of a guitar, we can look at some of the more popular mods. This article introduces mini toggle switches and push/pull pots, and shows how we can use these to modify a Strat in such a way as to allow use to add the neck pickup to any selection. This expands the number of available pickup combinations to 7.
• Why size matters: Fret width and height affect playability considerably. Fret wire measures at .078 to .110 at the crown, or top, and runs between .035 and .055 high. Taller frets, at .45 and up, tend to make for easier string bending and produce clear notes without much pressure. The latter makes them ideal for high speed playing. The furthest point of that concept is the scalloped fretboard, employed most notably by Yngwie Malmsteen and John McLaughlin, who played a specially designed Gibson J-200 with scalloped frets and drone strings with the group Shakti.

“Most guitarists learn from records,” says Dr. Andre Millard, a professor at the University of Alabama-Birmingham, editor of The Electric Guitar: A History of an American Icon. “That’s how you learn to play. We learn from the classic records. And those classic records have that classic tone, which is ’58 to ’63.” And quite frequently, Millard points out, the studio had as much an impact on those recordings as anything else. He uses the Rolling Stone’s debut, England’s Newest Hit Makers which was released on London Records in 1964, as an example.
Promotion lasts for 1 year from date of purchase. After that period, your voucher is redeemable for the amount you paid, less any value you may have received. Not valid as payment for Eat24 purchases. Not valid with other vouchers, certificates, or offers. Only 1 voucher(s) can be purchased and redeemed per person. Cannot be purchased as a gift. Subject to the General Terms. Learn more View more

The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.

{ "thumbImageID": "GSR200-4-String-Electric-Bass-Pearl-White/519524000051000", "defaultDisplayName": "Ibanez GSR200 4-String Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pearl White", "sku": "sku:site51275776902009", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Pearl-White-1275776902009.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Pearl-White/519524000051000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51275776901776", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Jewel-Blue-1275776901776.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Jewel-Blue/519524000085000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Red", "sku": "sku:site51275425410355", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Electric-Bass-Transparent-Red-1275425410355.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Transparent-Red/519524000016000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901322", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/GSR200-4-String-Bass-Black-1275776901322.gc", "skuImageId": "GSR200-4-String-Electric-Bass-Black/519524000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

{"eVar4":"shop: bass","pageName":"[gc] shop: bass","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: bass","prop1":"[gc] shop: bass","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"bass","prop5":"[gc] shop: bass","prop6":"[gc] shop: bass","prop3":"[gc] shop: bass","prop4":"[gc] shop: bass","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

Second, just like removing the pickup selector, you will need to access the back electronics cavity or remove the pickguard. Refer to the pickup selector section for more details. Take note of what wires are soldered to what lugs before you remove the pot. If you are not familiar with electric guitar wiring, I suggest that you draw a picture of the selector and label the soldered wires. Once you know where everything has be wired, you can cut the wires close to the lugs and remove the old pot. Then you can bolt the new pot in place, solder the wires on the lugs, replace the cavity covers or pickguard, and replace the knob. For more information about how to solder wiring, see the soldering page.
Vacuum tubes (called "valves" in British English) were by far the dominant active electronic components in most instrument amplifier applications until the 1970s, when solid-state semiconductors (transistors) started taking over. Transistor amplifiers are less expensive to build and maintain, reduce the weight and heat of an amplifier, and tend to be more reliable and more shock-resistant. Tubes are fragile and they must be replaced and maintained periodically. As well, serious problems with the tubes can render an amplifier inoperable until the issue is resolved. In the 2000s, high-end tube instrument amplifiers (along with a small number of hi-fi power amplifiers used by audiophiles and high-end studio microphone preamplifiers) survive as the few exceptions, because of their perceived sound quality.
Best Answer:  first off, there are tuning knobs on the end of the neck of the guitar(the neck is the long piece protruding from the body of the guitar) they control the pitch of the strings. When you tune a guitar you want the first string(or the smallest string) to be tuned to the note e.The other strings going up should be the notes b,g,d,a,e. You only need to tune the guitar whenever it gets out of tune. The knobs on the body of the guitar are volume control for each pickup,master tone control, and master volume.The controls differ from each guitar , but they usually follow something like that.Lastly, on a Les Paul there is a switch on the upper part of the body that controls which pickup is being used.-(the pickup selector). A pickup is a magnet that collects sound from the strings and lets it be amplified through a amp.A good amp costs anywhere from 50 to 100 dollars. Good luck on your guitar.
The functional attribute of this guitar is not the only factor that it gets credit for. The instrument comes with a neck & body binding together with trapezoid inlays that produce the classic looks that you would always love to display on stages. These are features that are truly amazing especially when you are under the stage lights doing a performance both during the day as well as at night. Such nice appearance will obviously give you more courage to keep on soldiering on with your ambitions of becoming a professional guitarist.
I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?
No matter how good a tech may be, his preferences are going to be different than yours on string height, etc. And he is never going to use the exact same amount of pressure fretting a note as you do (affects intonation adjustments). So, the best you can hope for is finding a good tech with good comunication skills, willing to listen to what you want. I'll admit I've never tried to find one, but that sounds more difficult than learning to do the setups yourself, which is what I did.

Decide between mic recording or using a direct box (DI). Recording the sound of your electric guitar by miking your amp is a great way to simulate studio quality sound. However, this will require expensive equipment, like a quality amp, microphone, and potentially sound dampening equipment or material. On the other hand, you can plug your guitar right into a DI to record your guitar.[1]

You might have read our review about the C40 GigMaker kit from Yamaha earlier on. This is a similar guitar, but it’s the C40II, and the black color makes it a limited edition instrument. The inlay is less “traditional” looking. Instead of an ornate “rosette” style, the inlay is a stripe pattern all the way around the sound hole, making the guitar look somewhat “jazzy,” to use a more descriptive term. So if this is the look you prefer, read on for more details.
Gain is the strength of the electronic signal carrying your sound. A standalone gain booster is essentially just a preamp, and can be an effective way to overdrive the preamp section of your amp, creating easier musical-sounding breakup and increasing the amp's power. A gain booster in a stomp box lets you instantly boost your sound level for solos without altering your fundamental tone.
I ordered this item from their ebay store, roughly the same price with shipping, very easy to read point to point instructions, this was my first diy pedal, I've fooled around with a soldering iron but not enough to speak of. I bought it because I was not pleased with my Peavey Valveking 112's boost sound, it not only boosts the signal, it changes the tone, from the reviews I watched on youtube, it sounded like this pedal would do the trick, for the price, and the fun of a first time build, I love it, it boosts the signal with no change in tone, I'm not super impressed with the pedal's distortion tone, but I am spoiled with that saturated tube tone, there is some extra hum when I turn on the pedal, I don't know if this is my fault from the build, or what, but I would ... full review
Fujigen went on to achieve lasting fame as the manufacturer of Greco guitars in the ‘70s and Fender Japan in the ‘80s and early ‘90s. But Fujigen’s work in the ‘60s is our focus. The Fujigen hardware is the easiest way to tell these guitars apart from Teiscos. For example, Fujigen embossed "mic 1" and "mic 2" into their metal control plates, while Teisco did not. This is just one example, but it requires a bit of reading and studying about the nuances of that hardware to positively identify the Fujigens for what they are.
I just built this kit, which I ordered directly from Mod DIY. Its the first pedal kit that I have built, although I do have a fair amount of electronics experience. Overall, I was impressed with the kit. All the parts were included, and functioned just fine. The instructions were outstanding, particularly if you use the high-res picture of the inside of a finished model for reference. There was ONE step omitted in the direction, which was to solder a short wire between terminal 3 of the toggle switch to connection 12 on the junction rail. But that was easy to spot.
When the Fender company invented the first widely produced electric bass guitar (the Fender Precision Bass) they also developed a bass amplifier, the Fender Bassman, first produced in 1952. This was a 26-watt tube amplifier with a single 15" speaker. In 1954, the Bassman was redesigned to use four 10" speakers. This speaker cabinet was an open-back design; as such, it had poor low-frequency efficiency and was prone to blowing speakers when used for bass because of the lack of damping. Somewhat ironically, it became very popular as an electric guitar amplifier. The circuit design also underwent repeated modifications. The "5F6A" circuit introduced in 1958 is regarded as a classic amplifier design and was copied by many other manufacturers, such as Marshall.
A chord is inverted when the bass note is not the root note. Chord inversion is especially simple in M3 tuning. Chords are inverted simply by raising one or two notes by three strings; each raised note is played with the same finger as the original note. Inverted major and minor chords can be played on two frets in M3 tuning.[56][74] In standard tuning, the shape of inversions depends on the involvement of the irregular major-third, and can involve four frets.[75]
Popular Categories: Body and Skin Care Air Conditioners Air Purifiers Anti Pollution Mask Cameras External Hard Disks Eye Care Face Cream Face Pack Face Scrubs Face Wash Fragrances Gaming Console Hair Care Hair Conditioner Hair Gel Hair Oil Health and Nutrition Health and Wellness Health Food and Snacks Laptops Makeup Mobiles Pen Drives Personal Care and Beauty Power Banks Protein Supplements Refrigerators Shampoo Smart Assistants Smart Watches Speakers Tablets Televisions Toiletries Toothpaste Washing Machines Water Geysers Water Purifiers Women Analog Watches
Most lo-fi amplifiers in the 40s and 50s produced unexpected distortion or overdrive tones at higher volumes. Guitarists quickly discovered that the Fender Tweed Champ (originally marketed to beginners as the Champion 800 in 1948) produced a distorted sound at high-volume levels thanks to the Champ’s low power output and simple circuitry. Many of the classic guitar solos in the 1950s were recorded through a Champ, which resembled a wide-panel TV cabinet covered in tweed cloth. Leo Fender even went so far as to manufacture the first 100-watt amplifiers for surf guitar pioneer Dick Dale, who had blown hundreds of Fender amps and speakers from regularly turning up the volume.

O WOW!...I love...Fallout 4 is a great game like the rest of the fallout series but if your a fan of the series u will be kinda of down that the choices u make don't affect the outcome of the game because they made more of a story they wanted to tell but don't lose hope still a good game and they might make a sequel to new Vegas and there just might be a Multiplayer for new Vegas 2....The world is so large and the gameplay non linear (which is good and bad), I find if I walk away from the game for a while, I have to spend a lot of time figuring out where I was and where I stashed things when I come back to it later.
Possibly the most famous of all guitar effects, the talk box has its indelible place in history.  The guitar signal is pushed thru a speaker into a tube that the player holds in their mouth.  This tube is usually run up a mic stand, so that the player can use the embouchure of the mouth cavity to control vowel sounds that are then picked up by the microphone and pushed back through the PA system.

As a general rule, I'll set up the 57 right against the amp's grill cloth, pointing it directly in to the speaker (sometimes at a slight angle from the outer rim of the speaker pointing toward the center). I'll usually place a condensor about two to three feet in front of the amp (at the same level as the amp) and point it at one of the speakers, and if I have another condensor available, I'll place it about five or six feet away, in front of the amp. I'll also raise the "far" mic to a height of approximately five or six feet off the ground.

What I am saying that we should look at the first three or four on each persons list and discard the rest. Then we’ll have a better estimate. Of course we always forget some fabulous guitarists and often some that deserve number two even number one on the list. Thats what statistics is good for. HOwever that said statistics is often a pillow for people. Faith and loyalty to true values is what brings success and fucks statistics. THings untoched statistics works but its the respect of god that changes things.
In the entry-level market, brand-name guitar companies are usually forced to make their guitars with cheaper materials. There is a simple reason for this. Most major brand-name companies have a brand owner (sometimes an American company). That company buys from a factory in China, and in Australia they will have a distributor who will sell to a retailer (your local music store). It’s pretty easy to see why they can be forced to use cheaper materials. There is a lot of price pressure to get a guitar manufactured at a low enough price for everybody to take their cut of the profit down the chain.
Here we have a cool vintage piece. Made in USA and is highly Possible this is a Gibson Archtop. Great Original condition make this a great find...this one is a Solid 8.5/10 condition. This one still has the original tuners and pick guard too. The neck is straight and the frets are still OK...and wow what a supprise this one plays great!..nice vintage repairs or damages just natural play wear and dings etc associated with a true vintage player....EZ on the eyes see the great detailed bindings! and wow this baby sounds very nice...great for Jazz .
Though Dennis Hartnett took good care of his ViVi-Tone instruments (mandola NMM 10809, mandocello NMM 10810, and this guitar), all three show signs of extensive use. Indentations on the bar-armature and wear to the screw-ends of the posts on the guitar pickup indicate that Hartnett also used the instrument for electric-only amplification, in addition to the electric/acoustic set up in which he left it. Hartnett's guitar is preserved with an amplifier (NMM 10812) by Webster Electric Company of Racine, Wisconsin, and an accompanying foot pedal.
Melodyne is a software application for OS X or Windows with which you can edit audio in a more musical way than was ever thought possible. In Melodyne, you work with notes – and not with a meaningless wave form. You don’t just see where the music gets louder or quieter but also where notes begin and end and at what pitch they lie. You can modify each note and thereby influence direc...
As a result of requests by audio engineers to reduce onstage volume, in the 2010s, in many large venues. much of the on-stage sound reaching the musicians now comes from the monitor speakers or in-ear monitors, not from the instrument amplifiers. Stacks of huge speaker cabinets and amplifiers are still used in concerts in some genres of music, especially heavy metal, but they tend to be used more for the visual effect than for sound reproduction.
[Attention Korg Pa3x /Pa4x owners and Korg Pa700/1000 owners- I have a special version of this 6-velocity layer piano in .set format that will load to your Korg in compressed format at 116mb (equivalent to 232mb) - This set sounds wonderful on the Korg and uses 22 oscillators for outstanding realism including resonance, key-off and pedal effects. Send me an email (see bottom right) and I can provide a download link or go to the demo on SoundCloud here Korg Pa Yamaha C5 and follow the download link]
Open Monday-Friday from 8 a.m. to 4:30 p.m., the Visitor Center showcases a diverse selection of Taylor guitars, including standard models and seasonal limited edition offerings, for players to enjoy. To enhance the playing experience, two sound rooms are equipped with amplifiers, enabling players to plug in and play in a private environment. The Visitor Center also houses the Taylor Guitars store, where guests can purchase items including guitar parts and accessories, along with Taylor-branded clothing and other items from the company’s TaylorWare line.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: amplifiers","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"headphone guitar amplifiers","prop5":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop6":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop3":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category3"}
Here we have a wonderful made in Japan Takamine from a while back in 1990 this makes it officially a Vintage guitar next year but its tone sounds rich and vintage now! As you will see looking her over this F349 is GORGEOUS!.... better than average condition in all aspects... few only minor doinks here or there but NOTHING to detract from this Taks sound - playability or sheer playing enjoyment... Excellent ALL Mahogany build construction, high AA grade mahogany, masterfully built - fit and finish excellent, neck angle is excellent so action is very good so playing is a breeze and quite enjoyable not all can state this...its 1-11/16ths at the nut so its a nice feeling medium profile " C " shape, frets are very good - excellent can barely tell its been played in fact if you polish them they will be as new...beautiful quality rosewood fingerboard no dead spots or funny buzzes noted...This guitars wood still shines like glass and overall is an outstanding original example with an addition of the best sounding Piezo transducer cleanly installed if I didn't tell you -you may not have noticed but she is also fully electric and sounds amazing amplified I played her threw my Princeton Reverb amp and it truly sounds bold & rich and rings like a bell with the newish Martin strings I installed (I have played this guitar in my office for a short while ) so they should be done stretching and are clean and ready to perform. This guitar is nearing 25 years old so don't expect a brand new guitar this is a beautiful vintage guitar and has personality and patina of a well treated well loved professional grade instrument. Its in excellent vintage condition. JVG Rated 9/10. If you want a rich sounding great playing fun vintage Japanese Dreadnought guitar well this one should put a grin on your face when you open her up and see it. Enjoy! Let me know if interested thanks for looking. Joe contact us at:
With that in mind, we need to point out something about this piece of content, and others like it that we have written: These recommendations are based on the knowledge and opinion of real musicians. We are not marketers or internet gurus trying to make a buck off Amazon. Now, we do use affiliate programs to support this site and those who run it, but we are not simply throwing pedals up without knowing why we're suggesting them. The point is to provide a proper context for your purchase, which we believe is the best way to make a sale, anyway.
It is typically not possible to combine high efficiency (especially at low frequencies) with compact enclosure size and adequate low frequency response. Bass cabinet designers can, for the most part, choose only two of the three parameters when designing a speaker system. So, for example, if extended low-frequency performance and small cabinet size are important, one must accept low efficiency.[24] This rule of thumb is sometimes called Hofmann's Iron Law (after J.A. Hofmann, the "H" in KLH).[25][26] Bass cabinet designers must work within these trade-offs. In general, to get extended low-frequency performance, a larger cabinet size is needed. Most bass cabinets are made from wood such as plywood. Gallien-Kruger makes a small extension cab made of aluminum.

Three and one half steps down from Drop D. Used by Darkest Hour on the song "Wasteland", Attack Attack!, Baroness (on their first two EPs), The Acacia Strain (on some songs), Dead by April (on some songs) and In Flames (on the song "Transparent" from Reroute to Remain). Chelsea Grin also used this tuning on their album Ashes to Ashes. Also Pantera and Whitechapel recorded Sandblasted Skin in G-g-C-F-A-D, Drop G variation with D standard.
Excellent article. I have found that is a complete waste of time trying to convince guitarist of anything contrary to what they already believe about instruments. The level of passion for the “wood doesn’t matter” camp is truly astounding. We are not testing a new drug or solving cold fusion. The question is simple, does wood make a difference in the tone of an electric guitar? Intuitively, it would seem strange if it didn’t; but, there are many factors that are going to affect the sound produced from a guitar; isolating them is as difficult as creating a study that will convince anyone of an idea they already are clinging to. I think this is a pretty good experiment, better than most I have seen. In the end though, who cares?…really. If someone would like a guitar made out of a Formica counter top…go for it, locking tuners, the pickups and strings of your choice…you’ll be ready to rock. And won’t you be the clever one? As for myself, my opinion, musical instruments have character, a soul if you will. That character comes from the material it is made out of and the craftsman that made it. There is no object more alive than a musical instrument. For arguments sake, lets grant the “wood doesn’t matter” their entire argument. I’d still buy the korina instrument over the countertop. And like most stubborn asses who play guitar, you won’t convince me otherwise.

The 2008 Les Paul Standard is outfitted with locking tuners from Grover, which deliver ease of use through a standard tuner and positive locking mechanism that securely locks each string in place. Simply insert each string through the string hole, turn the dial on the bottom of the tuner to lock the string, and begin tuning. Each string can be tuned to pitch in less than one complete revolution of the post. These Grover machine heads feature completely sealed components with an improved 18:1 tuning ratio.

"We are extremely excited about this next phase of growth that we believe will benefit both our employees, and the Memphis community. I remember when our property had abandoned buildings, and Beale Street was in decline. It is with great pride that I can see the development of this area with a basketball arena, hotels, and a resurgent pride in the musical heritage of the great city of Memphis. We continue to love the Memphis community and hope to be a key contributor to its future when we move nearby to a more appropriate location for our manufacturing based business, allowing the world the benefit of our great American craftsmen."[36]

When Eric Clapton plugged his 1960 Les Paul into a Marshall Bluesbreaker in the mid 60’s (the set-up used to record Blues Breakers with Eric Clapton, the “Beano album”) he created a new rock tone that immediately became a standard.[15] Clapton played a 1960 Standard as a member of John Mayall & the Bluesbreakers and in the early days of Cream. The guitar was said to have been stolen while Clapton was preparing for the first Cream tour in 1966, following the recording of Fresh Cream, and was long considered an iconic instrument by Clapton’s fans and Les Paul guitar admirers. Gibson announced production of the Clapton 1960 Standard, also nicknamed the “Beano Burst”, in 2010. Gibson says the instrument “accurately represents what Eric Clapton personally feels his 1960 Les Paul should be”, with Clapton consulting on the design of the guitar. Production is limited to 55 hand-aged instruments signed by Clapton (who was allowed to keep the first five of these instruments), another 95 hand-aged instruments, and 350 Vintage Original Spec instruments, but all five hundred instruments feature period-correct hardware, two Gibson reproduction PAF humbucking pickups, and subtly figured “antiquity burst” maple tops.
I've used 3 effects applications till now: Amplitube podfarm and guitar rig 5. The best software I found so far is guitar rig the sound it gives is amazing it has some pretty good presets and it has an intuitive interface I recommend trying out demos of every software to see which better suits you. I recommend guitar rig. I would suggest using a PC instead of a laptop because they're processor intensive. Anything that's part of the is series is great (i3 i5 i7). Good luck and remember to get asio4all drivers google it and get the newest drivers
Also in 1952, Kay introduced the matching K-162 "Electronic" Bass, which was the first commercially available thinline-hollowbody electric bass guitar, and the second production electric bass guitar after the Fender Precision Bass debuted in 1951. Due to the use of K-162 by a bassist of Howlin' Wolf, Andrew "Blueblood" McMahon, it is commonly known as the "Howlin Wolf" bass. These instruments[clarification needed] are believed to be the first semi-hollow electrics[citation needed] (i.e., thinline-hollowbody electric with solid center-block), predating the Gibson ES-335 by six years. Their unique design[clarification needed] featured a flat top with no f-holes, a free-floating arched back, and two braces running along the top. The result was a semi-acoustic instrument that was feedback-resistant while retaining natural acoustic resonances. In 1954, Kay added the K-160 bass to its catalog with baritone tuning, according to the catalog,[citation needed] "tuned like the first four guitar strings but one octave lower." Structurally this bass was basically same as K-162 bass, except for the higher pitched tuning and the addition of a white pickguard.
On my guitar, the bridge plate is held on by five screws. Three on the back of the plate, two towards the neck on the front. You may need to remove the intonation block things.One or all. If you decide to take any off, use your calipers and measure from the front of them to the back of the bridge plate, so that you don't lose your intonation. Mark each saddle like in the picture.
The Yamaha FG830 uses a well-engineered combination of woods to create a solid body and neck suitable for pro-level performance. You simply cannot go wrong with this guitar; the workmanship of this guitar is a cut above other acoustics in its class. Owners love the gorgeous dreadnought sound, describing it as rich, resonant, and well-rounded. One satisfied customer boasted that in a room full of acoustics, his Yamaha would “float to the top” of the din.

Mother-of-pearl rosette inlay. If you’ve had acoustic guitars with mother-of-pearl accents, you’ll appreciate the beauty of the mother-of-pearl inlay around the sound hole. This particular rosette pattern is inspired by the 1920’s Domingo Esteso design, which will be a treat for those who love specific historic details like this. Even if history isn’t your concern, the mother-of-pearl colors enhance the pattern.

Fender’s step-down Squier brand has offered unbelievably full-featured guitars, and the Bullet Stratocaster has classic American looks, a great sound and a price tag that will feel plenty comfortable for a beginner. It has a 21-fret neck (not the full two octaves of a pro guitar, but still pretty expansive) and a soft C-shaped neck that will make it easier for a player to get a feel for it. There’s a vintage hardtail bridge, so Fender has foregone the addition of a floating tremolo system, but that is probably better for a beginner as it will increase responsiveness and tuning stability.
You know you’re getting great guitar from the outset, because it’s based on Gibson’s legendary Dove model, which has been sued for decades now by distinguished guitarists in numerous genres, including the likes of Elvis himself. It really does look the part, with the dove design on the fretboard and pickguard, and numerous other nice little touches.
Copyright © 1996-2018 American Musical Supply, Inc. All rights reserved. American Musical Supply reserves the right to correct pricing and/or product specifications in the event of typographical errors found in our print catalog or on our website. If a product is listed at an incorrect price due to such errors or because of inaccurate information received from a supplier, American Musical Supply shall have the right to refuse or cancel any orders placed, whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is canceled, American Musical Supply will issue a credit to your credit card account in the amount of the charge.

If you use amplifier overdrive, want to use delay and reverb but still crave simplicity—I’d suggest designing a “hybrid” pedalboard. Just run your gain and filter effects in front of the amp, and use a pedal like the TC Electronic Nova System in your amp effects loop for time-based effects. This will require more cabling between your pedalboard and amp, but will sound much better than running your delay and reverb effects into a distorted amp. Pedals like the Nova System or the Eventide units boast specs rivaling studio quality rack gear.
I like it especially as a studio companion for lead guitar players who have session clients that need melodies to come out perfectly on recorded tracks. Having a neck that's so thin makes it easier to play and get right the first time which will reduce the number of takes. Though the live performer will benefit as well, considering that improve playability has universal benefits.

Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green

You’ll notice that once it reaches zero sound gets very muddy very fast. That’s because we have zero resistance between the signal and the cap. To prevent this, some people put a small resistor (10K or so) between the pot and the cap. That way we won’t affect pot operation at higher settings (510K is very close to 500K) but at lower settings it will prevent it from reaching zero as we’re always adding 10K in series.
Maton JB6 is a 1970s guitar manufactured by Maton. It features a thin solid body, short scale 24 fret design, two humbucking pickups, two tone controls, one volume, in/out phase toggle for bridge pickup and standard three way pickup selector toggle switch. The body has double cutaways, set neck and heavy metal base plate supporting a stop piece and bridge for increased sustain.
Brian Moore - Known for their innovative custom electronics and distinctive designs, Brian Moore Guitars continue to produce guitars that go beyond the conventional. Aside from their custom-built instruments, they now carry a host of artist signature models. One of their more popular products is the iGuitar, which feature acoustic MIDI, piezo, 13 pin Synth and more.
Jazz guitar playing styles include rhythm guitar-style "comping" (accompanying) with jazz chord voicings (and in some cases, walking basslines) and "blowing" (improvising solos) over jazz chord progressions with jazz-style phrasing and ornaments. The accompanying style for electric guitar in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In rock and pop, the rhythm guitarist typically performs chords in dense and regular fashion to define a tune's rhythm. Simpler music tends to use chord voicings focused on the first, third, and fifth notes of the chord. In contrast, more complex music styles of pop might intermingle periodic chords and delicate voicings into pauses in the melody or solo. Complex guitar chord voicings are often have no root, especially in chords that have more than six notes. Such chords typically emphasize the third and seventh notes of the chord. These chords also often include the 9th, 11th and 13th notes of the chord, which are called extensions, or color notes.
The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals start with all-too-similar circuitry – you need the input and output jacks, the bypass switch, and a barrel jack for power input. In some pedals, there may be as much wiring involved in the jacks and switch as there is in the effect itself. The SparkFun Proto Pedal takes care of the hard part and provides you with a simple infrastructure; all you need to do is decide what simple circuit to make to gain your desired effect, and you’ll be ready to rock!
I’m going to be doing a pickup upgrade in the next few months on a Strat-style HSS. I have an idea, maybe a crazy idea, about how I’d like to wire it but so far I have been unable to find any indication that it is even possible. This site seems like the best place to get an answer. The single coils in my guitar will be replaced with another set of single coils (Seymour Duncan SLS-1 lipsticks). The humbucker I plan on installing (DiMarzio Tone Zone) is capable of being coil-split, which I want to take advantage of BUT I would rather not install a push/pull pot. My wiring idea… Toggle Position: 1) Full Humbucker, 2) North coil only of humbucker for single coil performance, 3) middle coil only, 4) middle and neck, and 5) neck only. Is this even possible using the 5-position toggle switch I already have, or is there no way to do it besides using a push/pull pot or installing an additional mini-toggle?
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"classical & nylon guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
I just thought you'd like to know that Takamine produced for other names. I've just bought a 1973 Wayne which has a Takamine label inside stating it was made for Wayne. Its a Takamine 375 thats a Martin D35 copy. Wayne were guitar makers in Melbourne Australia in the 1950s and 60s and began importing under their name briefly in the 70s. It sounds amazing.

New Born has a great riff that starts at about 1:00. It is repeated a few more times during the rest of the song. To play this riff like Matthew Bellamy does, you'll need to tune down one of your strings. Click the button below to find out which string and how to tune it. Oh, and if you look closely at the video there are some clues there for how to play it!

Most of the guitars, banjos and mandolins my customers use and collect have been made by major manufacturers such as Martin, Gibson and Fender or a few superb handcrafters such as D'Angelico and Stromberg, but over the years, by far the greatest number of instruments purchased in the USA and worldwide have been lower-priced student models. Prior to 1970 most student grade instruments sold in the USA were made here by companies such as Kay, Harmony and Regal in Chicago or Oscar Schmidt of Jersey City, New Jersey, and Danelectro of Neptune, New Jersey. When I started out playing and collecting guitars in the mid 1960s, brands such as Harmony, Kay, Stella, Silvertone and Danelectro were the standards for student use. We saw very few Oriental imports.
In the early 1960s Rickenbacker history became forever wedded to one of the biggest music upheavals of the 20th century: the invasion of the mop-top Beatles from Liverpool, England. The Beatles used several Rickenbacker models in the early years. Before the group broke up, John Lennon would own at least four. This love affair began in Hamburg, Germany in 1960 when he bought a natural-blonde Model 325 with a Kauffman vibrato. Lennon played the original (which was eventually refinished black but still easily identified by its gold-backed lucite pickguard) on all Beatle recordings and in all concerts until early 1964.
If you’re new to the world of guitar pedals, it can be a little daunting if you’re thinking to yourself “which guitar effects pedals do I need?”. Maybe you’ve bought your son or daughter a new guitar for Christmas or their birthday, or you’ve decided to really get serious when it comes to changing your sound up and you want to know where to start, what guitar effects pedals do and what sounds different guitar pedals make. Either way, we’re here to help with our handy guide to guitar effects pedals, complete with sound examples.
Rule 3 - Experimentation occurs within these groups of effects. While these three major groupings need to follow a strict order, the effects within those groups can be toyed with to invent new sounds. For instance, you can apply a reverb to your echo delay or apply an echo to your reverb. But that general group of time-based effects needs to come at the end of your effects chain, regardless.
In any case, by late 1933 or early ’34, Dobro expanded its amp line to include what is probably the first twin-speaker amplifier! This had a football-shaped speaker grille with lyre and Dobro insets, and two 8″ Lansing field coil speakers. Nothing else is known about this amp, but it may have had the same chassis as the single-speaker version. It can be seen on page 104 of Guitars, Guitars, Guitars (All American Music Publishers, 1988).
The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the transducers are wired directly to their respective RCA jacks as opposed to current production tanks where transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond, Accutronics and Gibbs tanks from the 1960s were also wired directly to their respective RCA jacks. In addition very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.
Onboard effects had already appeared on various guitars, especially Höfner and Vox models, but these were not truly “active” in the modern sense. Alembic, with support from the Grateful Dead, was exploring active pickup systems, but these were still basically custom-made instruments. Both had a master volume and tone control with three-way select and a “band rejection filter tone switch,” also called a midrange bypass filter. Ovation was among the first to offer linear potentiometers to correlate movement with effect. Controls inside were mounted on a circuitboard with individual trim pots that can be adjusted to control the volume of each pickup.
Open Monday-Friday from 8 a.m. to 4:30 p.m., the Visitor Center showcases a diverse selection of Taylor guitars, including standard models and seasonal limited edition offerings, for players to enjoy. To enhance the playing experience, two sound rooms are equipped with amplifiers, enabling players to plug in and play in a private environment. The Visitor Center also houses the Taylor Guitars store, where guests can purchase items including guitar parts and accessories, along with Taylor-branded clothing and other items from the company’s TaylorWare line.
Due to the great sensitivity of some advanced vibrato systems like the Kahler, the Steinberger and the Floyd Rose, a light touch is required. Simply placing one’s hand on the bridge can cause notes to drift in and out of tune. So players — especially the heavy handed— would be wise to try a variety of vibrato-equipped guitars out before making an instrument purchase or modifying a valued six-string friend.
For those other performances, we run into limits of computer memory, computer processing power and computer programmers' time (and talent). With increasing processing power available in the consumer market, simulations are in some cases surpassing storage intensive sample libraries in terms of acoustic similarity and perceptive preferences. In guitar world, though, there seem to be no VST players of the simulation variety contending for top honors against leading sample libraries - of which seems to be the leading collection (unless you like something Vienna Symphonic Libraries has to offer)
The first guitarist to chain effect pedals together, Hendrix combined their tones and textures with whammy bar squeals and growls and unorthodox playing techniques to make the guitar sound like a symphony, animals, armies or the far reaches of outer space. While most Sixties psychedelic music was banal bubblegum pop with fuzz-tone guitar hooks, Hendrix made music that actually sounded like a trip after ingesting a cocktail of LSD, mushrooms and THC.
Although there have been several copies of Gibson guitars in Epiphone, yet their quality, tone, and artisanship suffice to attract and retain more customers. During the past few years, Gibson has adapted some modifications in their lineup. This includes restoring their classic Les Paul Studio design as Studio T, and the Les Paul Studio Faded, which is an affordable variant.

In the image above, the first higher peak we see is E4 (i.e. the low E-string on a guitar in standard tuning), the second peak is E5 (i.e. an octave higher) and the following high peaks are B5, E6, G#6, B6, D7, and so on. Remember that the test rigs only have two strings, both tuned to E, and plucked open. So what you are hearing is a mish-mash of tons of overtones that shape the character of the “tone” that you hear.
An excerpt: “The Dobro brand name has been identified with resonator guitars since 1929 and is currently owned by Gibson Guitar Corporation. Despite its registered trademark status, the Dobro name has at times been used generically to refer to woodbodied instruments with 1) an aluminum cone or “resonator” mounted so that the cone opens toward the top of the instrument and 2) an 8-armed spider assembly supporting the bridge.”
San Francisco-based Senior Contributing Editor Joe Gore has recorded with Tom Waits, PJ Harvey, Tracy Chapman, Courtney Love, Marianne Faithfull, Les Claypool, Flea, DJ Shadow, John Cale, and many other artists. His music appears in many films and TV shows, plus an incriminating number of jingles. Joe has written several thousand articles about music and musicians and has contributed to many musical products, including Apple’s Logic and GarageBand programs. In his spare time Joe produces the Joe Gore line of guitar effects and edits a geeky guitar blog (
Stay tuned for the second part of our series/parallel discussion next month. We’ll pick up the soldering iron and explore some sweet parallel/ series switching options for our Strats. This will also close out our run of Stratocaster mod columns. When we finish the series/parallel discussion, we’ll switch over to Telecaster and Esquire mods. Until next time, keep on modding!
And therein is the VST guitar's edge, as it continues to improve in quality, not matching that of performances by the late Jimmy or the long-standing Carlos or whomever one adopts as their personal guitar deity, but bringing in new qualities of its own. In computer science terms, improved controllers are providing ever more interesting views of ever more detailed models to listeners attuned to the particular environment augmented by the virtual model. The guitar VST is not your daddy, but it might be the little sibling with your daddy's eyes. In the long run.. well... forget that. We love you pops. My little sisters, brothers and I hope you live forever, or at least as long was we do.
Preamp, or gain, controls (sometimes called “volume” on master volume–equipped amps) let you dial in impressive-sounding distortion at low volumes, but excessive preamp distortion can sound too compressed and sizzling at high volumes. Turn down the gain and crank up the master volume until the amp is set at the output level you’d normally play at. Now, slowly increase the gain until the sound becomes as distorted as you want it to be. If the tone is buzzy and lacks dynamics, the amp will have all the onstage presence of an American Idol reject.

This beautiful wood is not a very common tonewood for the construction of a guitar body, but you may see it more commonly in neck construction. However, it has been done to build a guitar body, and it was done well on the famous Gibson J-200 that the Epiphone EJ-200SCE also imitated. It’s a very solid, hard, and dense wood that has amazing sound punch and bright tones.
Many community, vocational or technical colleges offer technical and musical programs for those who wish to become guitar technicians. Many are instrument construction and/or repair programs. Guitar tech courses include construction, set-up, structural repair, fretwork, structural design and finishing for acoustic and electric guitars. Any courses involving musical theory and music technology may be helpful in advancing a guitar tech's career.

Multi-effects processors come in various configurations, too. Some are floor units that have built-in foot pedals and controllers so they can be operated while your hands remain on your guitar. There are rackmount processors (these can be fitted into a rack of recording gear in line with your signal chain) that incorporate a preamp for your guitar. The more sophisticated models have MIDI I/O for connecting guitar synthesizers to keyboards, modules, computers and other MIDI devices and include a divided pickup to attach to your standard guitar. These processors pack effects libraries that offer combinations of effects, amp models and stompboxes that can number in the thousands. Switching can be controlled by onboard knobs, foot controllers or guitar-picking technique. Expect to pay considerably more for a rackmount effects processor, in a range of three- to four-digit prices. 
Gibson Les Paul specifications during 1958–60 varied from year to year and also from guitar to guitar. Typical 1958 Les Paul Standard necks had a thicker “club-shaped” neck, thinner frets and lower fret height, which changed during the course of 1959 to develop into typical 1960 necks with a thinner cross-section and wider, higher frets. Les Paul Customs from the same period had totally different frets and were referred to as “The Fretless Wonder”, which were designed for jazz guitarists with thick flat-wound strings.[note 7][note 6]

Buddy Holly was one of the pioneers of the Stratocaster and used the instrument on virtually all of his songs with the Crickets. During the recording of “Peggy Sue”, rhythm guitarist Niki Sullivan was not needed for the song, and instead stood next to Holly, and flipped the selector switch of Holly’s guitar from the neck pickup to the bridge pickup for the guitar solo.
Muddy Waters is obviously one of the most recognized and influential blues artists of this century. When his name is mentioned phrases like "slide guitar" and "electric Chicago blues" are associated with it, but what about "wah-wah" and "psychedelic"? For a small period in history, Muddy Waters' image became one of a psychedelic icon and if there weren't records still around from then, most people would doubt it had ever happened. The sixties were a strange time for music and musicians- none felt stranger than musicians from the previous decade trying to stay afloat then. Many times in music, established artists will try to expand upon their work and take a chance with something different. They should at least be praised and encouraged when they try to experiment with their sound. If music were condemned to always following a strict guideline of rules, it would be pretty boring. Music should be allowed to grow and explore new territories because everyone can agree that it's not exciting if it's always predictable.

My first recommendation is Epiphone. It is not just one of the best but it is the best guitar brand for beginners who are looking to buy a guitar to learn the ropes. I have included a few recommendations from this brand in this post. If you don’t know which one to buy and you are a beginner then buy one from this brand and you won’t go wrong for sure.
Some bass amps have two inputs. One some amps, one is a high gain input and the other is a low gain input. On other amps, the two inputs may be intended so that two basses can be plugged in at the same time. On these amps, there may be a separate volume control for each input; this is done to enable a bass player to switch between two instruments on different songs (e.g., a fretted and fretless bass) without having to unplug and plug in jacks. For example, the vintage Traynor Bass Master tube head has two inputs, each with its own volume control. Some bass amps have an auxiliary in jack, for plugging in a drum machine, keyboard bass or synthesizer. Some bass amps also have an external speaker out jack. While this jack is also 1/4", a speaker cable must be used with this jack, rather than a patch cord, because it sends a powered signal out to an external speaker cabinet. Higher-powered and more expensive amps may have Speakon output jacks.
Clarence Leonidas “Leo” Fender was established this brand in 1946. The Fender Musical Instruments Corporation (FMIC) manufactures the stringed instruments and amplifiers, such as solid-body electric guitars, including the Stratocaster and the Telecaster. This brand is the kings of hearts and getting the popularity from blues to quick rock tempo. Fender’s Precision and Jazz Bass models are now considered to be the standard to which most other electric bass guitars are measured. It’s famous for best guitars which are made ever in the history.
Anyone who commented that this was a good list needs to reconsider what makes up a great guitar player. It’s about being multi-faceted musician. Creativity, technicality and musicality all come in to play when your talking about the highest quality players. When I listen to a “shredder” like Steve Vai, I think..yes he is fast but his music makes me feel absolutley nothing emotionally. Truth be told…SRV and David Gilmour are probably the only players on this list that deserve to be there.
TASTING NOTES: When you add a second speaker, tones acquire texture and detail due to the phase cancellations between speakers. Tones also get more diffuse, with rounder highs and softer focus. Note how the 4x12 Marshall configuration has a muscular low-mid thump that the Fender configurations lack. That’s due in part to the closed back of the Marshall cab.
Guitar-Sunbeam : Precisely transmits the eternal electric guitar, ideally suited for modern production. It combines an extensive library of strum patterns, brute force, arpeggios and real riffs with real-time performance monitoring. An innovative playback engine allows you to create an almost infinite number of variations of chords and you get convincing, musical results.

Just SOLD OUT: here is a great sounding wonderful 43 year old Vintage Japanese OOO guitar in excellent vintage condition. We have already set her up with our Martin Bone Nut & Compensated Saddle and action is dialed in to Martin specs. We also upgraded the original plastic bridge Pins to SOLID Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic if not familiar with the Morris brand thats ok many are not, I have know of these for 2 decades now many of these were made in the Terada factory in Japan... another name you may not have heard of none the less they are know to make the highest end guitars in Japan in those days and also today, for makers like Ibanez virtually all of their top end guitars like Musicians - Artists - George benson GB line and the old Aria L-5's and Ibanez L-5's and many others continuing on today in that great Custom Shop tradition. This is one of them and is very well constructed with top workmanship and fit and finish build quality is comparable to a Martin- Taylor_Gibson and so on... that is to say no worries this guitar Morris has an excellent pedigree. Guitars of great playability and great sounding what more do you need?.... This guitar was built from wods aged at least 20 years at time of build that was over 40 years ago and just look at its condition to this day... it has truly stood the test of time. See for yourself... it this price range a wonderful classic 000 style Japanese true Vintage guitar in its own right. Great Value and great fun Japanese vintage collectible. For a song. .
While most collectors aren’t necessarily going to boast that they own a number of Harmony guitars, we shouldn’t forget the important “first axe” role Harmony played for many guitarists. This company took mass production of guitars to the next level. And though you may have to sort through a few to find one that is completely intact and doesn’t allow a car to drive under the strings, they were quality-made instruments for the most part. For those of you who first learned on a Harmony Archtone, this is certainly a childhood treasure!
I took a Mesa Boogie to England and used a voltage regulator. The power out on the Boogie converted the power to the correct US one for the digital delay I took. There is an issue with Hertz - not the car rental company. In the US it's 60, in most countries it's 50. Don't know what that does but I'm sure there are savvy electrical guys on Q who do.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 55mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 8 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Fixed - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: IBZ-8 - Pickup Configuration: H-H - String Instrument Finish: Black, White
Coupling an SM57 with a small-diaphragm KM84 condenser finds favour with Bill Price and John Fry, while Mike Hedges chooses his favourite Sennheiser MKH40. Bill Price also mentions the importance of finding a very close phase match between the two microphones. "What one had to do was balance those mics equally, grab a pair of headphones out in the studio that were turned up nice and loud, and fractionally position one of the mics so that they were perfectly in phase at high frequencies, because if you had one mic five inches away and the other six inches away you'd obviously get really bad phase shift that would take the top off the guitar sound."
The electronic transistor finally made it possible to cram the aural creativity[when defined as?] of the recording studio into small, highly portable stompbox units.[citation needed] Transistors replaced vacuum tubes, allowing for much more compact formats and greater stability.[citation needed] The first transistorized guitar effect was the 1962 Maestro Fuzz Tone pedal, which became a sensation after its use in the 1965 Rolling Stones hit "(I Can't Get No) Satisfaction".[41][42]
The person who said "I have a friend who plays an ashton, and he actually thinks it's a good guitar, while he constantly has to put paper under the strings because otherwise everything above the 3th fret is literally unplayable. Poor guy" MAY I POINT OUT that they just stated how the guitar was in a poor condition but said nothing about why or how long the guitar has been played and all these essential details.
• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.
Compressor sometimes sounds good after distortion too, it helps with noise (compressors can be noisy and if put before overdrive then the distortion pedal makes the noise louder). Placing the compressor after distortion also increases your sustain (depending on the type and amount of distortion used!). It can sound darker if placed after as well - so it really is down to your ears and what you think sounds best! But I have mine first in the chain, before Fuzz as I don't often (ever?) use them together
My mom just gave me a Norma FG12 acoustic guitar my father bought for her back in the day. It is in the original box and i honestly doubt it ever made it out of the box! It appears in pristine condition but I know absolutely nothing about guitars. I really don't care to learn how to play it. I would like to sell it but have absolutely no idea how much it is worth nor know the best place to try to sell (?ebay perhaps) Any suggestions/thoughts would be most appreciated. Thanks!
Every time I guitar shop I come back to Gibson. Pricey, but the look, feel and tone are to my tastes. A lot of classic songs have been recorded over the years on these guitars. Are they superior to Martins or Taylors? It's a matter of preference. I own a hummingbird custom and the aesthetics, tone and feel are unsurpassed, but it doesn't "cut" like a Martin. For chording though, it's a better balance. I also own a J-45 which is the ultimate acoustic blues guitar.
Often the names and appearances of these pedals will give you a clue as to what types of sounds they produce. Otherwise it's a good idea to look at interviews and endorsements to learn which distortion stompboxes your guitar heroes are using. Also, be sure to check out our videos and audio clips to get a sense of each distortion pedal’s capabilities.
Play heavy rock or metal music? Listen up! These guitars feature a twin horn cutaway shape and a long-neck design. They are lightweight compared to the Les Paul, but can be difficult to get used to. They can feel unbalanced because of the long neck. They have two humbucker pickups like Les Paul guitars but have different volume and tone controls for precise settings.
Guitar picks are really cheap, maybe $.25 to $.50 each. The best way to know which kind you like best is go to a music store and buy $5.00 worth of picks of different thicknesses, sizes and materials, take them home and try them out over the course of the next several weeks or months as you learn to play. There is no right or wrong answer to this question, its all a matter of personal preference. You'll figure out for yourself which you like best.
There's just no getting around the Martin brand when there's talk about good acoustics. And since we're talking about the best of them, it's not surprising to find their name filling up multiple slots in this list. The Martin DRS2 acoustic guitar is special because it gives us a true all-solid wood body Martin acoustic guitar - at a very reasonable price point, in the dreadnought shape that the company themselves developed.
Larrivee is much 'closer to home' and have been operating out of California since 2011. Although you can buy their instruments from Guitar Center and Amazon, and I personally like what I've read about their approach to lutherie, they didn't quite score high enough to make the final cut due to the method I used having a bit of a bias toward wide availability - I may rethink the approach if I revisit this topic.

The moral of this story is simple, if you have an old Terada, Yamaha, Ibanez, Suzuki, Yairi, Tokai, Takamine, Emperador, Morris, Pearl or Tama (yes! they made guitars to) just to name a few, you probably have a guitar that given the right bit of TLC will wipe the floor with most of its modern competitors, including those beautiful guitars that cost $2000.00 plus. Ok Then, enough of my yacking, enjoy the pictures.

It will take time to write and update all of the content at once. Come back regularly and I promise that there will be always something new for you to read, the list with essential guitar effects will be constantly updated. If you are just starting out, we recommend going through some online guitar training before you dive in the guitar pedals world.

{ "thumbImageID": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "defaultDisplayName": "D'Angelico Excel Series EX-SS Semi-Hollowbody Electric Guitar with Black Hardware", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51438957997383", "price": "1,699.00", "regularPrice": "1,699.00", "msrpPrice": "2,629.99", "priceVisibility": "1", "skuUrl": "/DAngelico/Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black-1438957997383.gc", "skuImageId": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "brandName": "D'Angelico", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }