The microphone set up I described earlier will give you a similar effect. The close mic gives you great detail (in audio terms, top-end, treble) and warmth. The mid-distance mic will give you the perspective that the amp is in a room, but without too much loss of detail. The far mic will tell you in no uncertain terms that you are definitely in a room, and with any luck, the listener's brain will process that information and tell the listener what size the room is (I'm not talking exact measurements here--just rough approximations). There will be a fairly significant loss of detail though. The combination of any of the mics will give you varying degrees of perspective and detail.
It was founded by Orville Gibson in 1902 as “The Gibson Mandolin-Guitar Mfg. Co., Ltd.” in Kalamazoo, Michigan.    Gibson is known for its innovation and supreme quality. Gibson’s Les Paul is very famous Guitar which creates the wildfire in the hearts of million fans. Gibson is always committed to provide the best quality with minimum disorder in all over the world. To enrich your experience the can prefer this wonderful Guitar.
If the Complete Technique book is good for quick starts, this would be the bullet train. Another Hal Leonard selection, this is a trim 48 pages for teaching you how to hold a guitar for the first time. Tuning up, easy chords, and strumming. If you got a guitar on Friday, use this to put together your first three-chord jam by Monday. Will it sound good? No, no, it will not. But you’ll have started, which is key. Some of the other books on this list are dense with both concepts and pages, which might delay your starting. Don’t let that happen.

The Meisterklasse is a high-end harmonica on the modular system, made in Germany, featuring chrome-plated cover plates, an anodised aluminium comb, and extra thick 1.05mm nickel-plated reeds. One other feature that sets the Meisterklasse apart from most other Hohner harmonicas are its full-length cover plates, which extend all the way to the ends of the harmonica's comb rather than sharply angling down before the ends to form an adjoining surface parallel to the reedplates and comb. The only other Hohner harmonica possessing this quality is the curve-framed Golden Melody.[25]
this is a really cool product. at first i thought i was disappointed in the drum loop sounds becsuse i thought they sounded too cheesy and not real but when i recorded some music using them along with the songs ive been working on, it turned out sounding pretty good and im happy with it. Also, my bass that sounds to cheap and not so great recording in through my irig2 without any effects module , is drastically improved when i plug it into this NUX-MG20
While Dave Matthews Band has no more confirmed dates on their schedule, Matthews and guitarist Tim Reynolds have a number of duo performances on the docket, including a slot at Farm Aid 2018 in Hartford, CT on September 22nd alongside Willie Nelson, Neil Young, John Mellencamp, Chris Stapleton, Sturgill Simpson, Kacey Musgraves, Margo Price, Nathaniel Rateliff & The Night Sweats, Lukas Nelson & Promise of the Real, and Particle Kid. Dave and Tim also just announced their return to Mexico for a concert destination event set to take place February 15th–17th, 2019.

This old Nickelback hit is made up of only four different chords, written in the Key of G. During the verses only use G – C – F to progress, while the chorus of the song will add an Am (A minor) to change things up a little bit. This is a fun song to listen to and play along with, especially since the song is set a slower tempo, especially for a rock song.
Gruhn Guitars: If you're looking for a convenient appraisal that can be done online--something along the lines of what May Music Studio used to do--Gruhn Guitars offers an appraisal service. You must first send information and pictures of your guitar according to their guidelines. You must also include a payment for the appraisal fee, which varies depending on the instrument.
That it does, indeed. Acoustic design has been refined to reflect the best possible usage of materials and shape to get the most productive sounds and tones and, as you can see, it's pretty consistent. Wood is the predominant role player in an acoustic's construction, because it directly affects the sound. Only the best, resonant tonewoods would do and they were used to the hilt to make a good sounding instrument as the sound partially relies on it.
the switch is to change pickups and the knobs are for volume and tone. u only need to mess with them if u want to change the sound of the guitar for various songs or styles of music. to tune the guitar u use the tuning pegs on the headstock (at the end of the neck). u need to tune it if it gets out of tune and make sure u replace the strings fairly often especially if u get a nice guitar like a les paul. old strings get tighter and can pull the neck and make it bow forward making it harder to push the strings down to the frets.
Another issue is the fact that, in this circuit, the tone pot always has a cap engaged. You could use a really tiny value for the smaller cap so there’s little perceptible cut at the minimum setting, but that can make a substantial part of the pot’s range a little too subtle. So my plan is to combine this with a Ned Steinberger-designed JackPot as the volume control. This part has an “off” setting that bypasses the tone circuit entirely for a maximum-bright sound. That way, I’d choose for the smaller cap a value that provides the minimum treble cut I’m likely to want. (I suspect I’ll wind up with something between .0022µF and .0047µF.)
Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.
Fender is well known for producing excellent quality musical instruments. Not just today, instead it always has topped the list of best guitar brands as an icon in the music history of America. It produces a brighter tone, accompanying single coil pickups rather than the humbuckers. The single coil pickups are specially designed in a way scratching through the mix with the glorious sound to produce the characteristic tone. The unique part of Fender guitars may cause issues with humming.
Acoustic guitars that have been fitted with a pickup can be recorded using the same techniques as standard electric guitars when plugged into an amp. Interesting sounds can be created by mic’ing up an acoustic guitar and sending the sound through an amp. This can be done live – although you should be aware of feedback – or a previously recorded acoustic track can be re-amped and used exclusively, or mixed with the original acoustic track. You can get some really gnarly and original ‘electric’ sounds with creative use of overdriven acoustic guitar; it’s especially good for slide playing.
If you are familiar with - a special kind of - programming, you can use something like Pure Data or Max MSP. Pure Data (PD), for example, is an open source, visual programming environment for manipulating streams of data like audio (or video). With PD you are able to build your own individual FX chains or use community contributed patches (In PD speech "programs" are called patches). But I think it's not as trivial to use as out of the box products.
Wah-wah: A wah-wah pedal creates vowel-like sounds by altering the frequency spectrum produced by an instrument—i.e., how loud it is at each separate frequency—in what is known as a spectral glide or "sweep".[68] The device is operated by a foot treadle that opens and closes a potentiometer. Wah-wah pedals are often used by funk and rock guitarists.[69]
This guitar master is actually a custom guitar builder. He started building guitars in 1993. "I've been doing this a long time," Paul says. "It's just really natural to me. I'm weird. I just look at stuff and know how to fix it." When he younger, Paul was good at woodworking, and besides picking up the guitar at 14, he needed another hobby. But learning the craft of guitar repair didn't require a master, simply a book. "Imagine that, great book." He then converted his garage into a shop, and in two years, his custom guitars became commercially viable. "It's the real deal, all high-end neck set stuff." Today, Brian Paul's Guitars are some of the finest guitars on the market. Some of his clients include Susan Tedeschi, Derek Trucks, Jim Suhler, Warren Haynes and Texas Slim. Even Dallas blues legend Bugs Henderson owned one of his guitars.
We've watched Dan Erlewine repair this 1930s Kay over the previous 3 Trade Secrets. It's time to finish it up. Elliot John-Conry of EJC Guitars ages Dan's patch of new plastic binding so it blends in with the old binding around it. About the guitar in this video: This 1930s Kay Deluxe is a fixer-upper that Dan Erlewine repaired in order to sell. Now that it's in great shape again, maybe Dan'll keep it!
Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.

Imagine a rich, authentic acoustic guitar tone coming from your electric guitar - at the flick of the switch!  Replace your current saddles with Graph Tech's ghost modular pickups and one of our Acousti-Phonic preamp and you'll have instant access to true, acoustic tone from your electric guitar or bass, without altering your electric pickups.  With the ghost Acousti-Phonic system you can play one guitar!  It can be electric AND acoustic, separately, or blended together for an infinite range of new and exciting sounds.

This list is an amateurish joke. Many guitars listed are pure cheap junk I'd toss in the garbage even if they were free. Take it from a 45-year Pro, Parker & PRS are the 2 highest quality. Fender, Ric and Gibson, along w/ brands that have stood the test of time, plus a few hand-made (custom) brands are the only ones you can seriously depend on. The rest are mostly pathetic attempts at copying a major brand and cutting the price by REALLY cutting back on quality. As they say: "You get what you pay for. "
For a more neutral experience, we bring you ESP E-II Horizon FR. This is one of ESP’s top tier models which packs a set of high output Seymour Duncans. Build quality is top notch, and so is the performance. We tested this guitar some time ago, with a number of us having the chance to play it for several days. Anyone who picked it up was in love it at the end of the day. It’s just that good.
The Epiphone LP Special II has a mahogany body and neck. The fretboard features dotted inlays and is made of traditional, unfinished rosewood – a standard choice that yields a sound consistent with the aesthetic standards of a Les Paul. If you want a Les Paul but you don't want to pay a fortune for it, this mahogany beauty is worth your consideration.

Bass distortion effects preamplify the signal until the signals' waveform "clips" and becomes distorted, giving a "growling", "fuzzy" or "buzzing" sound. Until the late 1980s, distortion effects designed specifically for electric bass' low range were not commonly available in stores, so most electric bass players who wanted a distortion effect either used the natural overdrive that is produced by setting the preamplifier gain to very high settings or used an electric guitar distortion pedal. Using the natural overdrive from an amplifier's preamplifier or a guitar distortion effect has the side effect of removing the bass' low range (low-pitched) sounds. When a low-range note is amplified to the point of "clipping", the note tends to go up an octave to its second harmonic, making deep bass notes sound "tinny".


Chris Broderick (b. 1970) is the lead guitarist for Megadeth, formerly of Jag Panzer and Nevermore. His main guitar was a 7-string RG model. During the recording of Endgame, he started using 6-string Ibanez S series guitars, which are painted with artwork from various Megadeth albums. This is because Dave Mustaine didn't want Broderick to use his 7-strings in the studio. He has since switched to Jackson Guitars.

Wow! I don't even know where to begin... I am using this processor with my new Cecilio electric violin. I learned and trained on classical violin, acoustic, reading sheet music, etc, so I'm pretty new at now playing an electric one hooked up to an amplifier, and even newer at using a pedal/processor. Upon first assembly, I found that many of these effects will probably not be used in the music that I play (worship & praise - old school & contemporary), but others will be very useful to bring a new sound to old songs. Also, some of the effects sound very similar to one another. I haven't yet figured out and tried to edit and save any effects to my liking, so I can't really say how well the MG-100 does in that area. But I must say that I am absolutely in love with the drum machine ... full review
Once you've mastered a few songs on the guitar, you may want to record what you can do so others can hear you shred a wicked solo. Or you may want to use your recording to help improve your skills. In either case, recording your electric guitar outside of a studio can result in poor sound quality that is less than desirable or noise complaints. Depending on your situation and equipment, there are many factors you'll likely have to tweak on your way to getting the best recording, but with a little effort, you'll soon be able to listen to an awesome recording of your musical ability.
This is because sound in an acoustic is dependent upon the bridge, saddle, and soundboard’s (top) ability to transfer string vibration through the sound hole of the body. The top (soundboard), back, and sides makes the body of the guitar where the sound hole is designed and cut. Knowing this, you’ll not only need wood that’s strong, but wood that can offer unique acoustic properties that emphasize its ability to project differing sounds at various frequencies. Of course, your choice of strings also lends to the harmonic ranges of a guitar.
Having spent years developing the JDX 48 and Headload, it only made sense that Radial would develop a solution for guitarists who didn’t want to use an amp at all; hence, the JDX Direct-Drive™ was born! The Direct-Drive lets guitarists choose between three different amp voicings: “Combo”, “Stack” and “JDX 4×12”, with further controls to adjust the brightness of the amp. The guitarist simply plugs in their guitar through their pedals, into the JDX Direct-Drive and out to the board with an XLR cable. There are additional outputs for attaching to onstage amps or speakers as well for guitarists who are more comfortable having volume with them on stage. The engineer can then mic the amp and mix the two signals together to get the best tone out of the PA system.

Archives of the best free VST plugins (electric guitar and acoustic guitar plug-ins) for download. We have created audio / video demos for the most of VST plugins so that you can hear how they sound before you decide to download them. You don't have to register for download. The most of VST plugins in our archives are provided with a link to VST plugin developer so that you can donate to the author if you wish.

Welcome to the gallery of Silvertone guitars from the VintageSilvertones.com collection! The instruments are listed in chronological order from left (oldest) to right (more recent). The gallery will continue to grow as we get more Silvertones. The purpose of this gallery is to help identify all the Vintage Silvertone guitars from the 1950's through the early 1970's. We're major fan of Silvertones and have discovered that there's a lot of misinformation out there.
The Epiphone G-400 features a mahogany body and neck and a rosewood fingerboard. It has Alnico Classic PRO™ pickups with coil-splitting on both pickups via a push/pull control on the pickups’ volume controls which gives you a lot of tonal variety. If you want to nail it like Angus Young, Eric Clapton in his Cream days or Tony Iommi from Black Sabbath, the PRO gives you the sound of a true SG without the vintage price tag.
Harmony almost wrote the book on guitars and responsible for so many rock stars. Youngsters all over the world ordered guitars from Sears, Montgomery Ward, and later by JC Penny. These affordable guitars are now very sort after and have become very expensive. Many of these models have been copied and reissued over the years. In their heyday, Harmony was the largest manufacture of guitars in the USA. In 1964-65 they sold over 350,000 instruments. The pickup used during and around those years were made by DeArmond Company. Today Vintage DeArmond Pups are still valued and sold. Look into years of bands, and you will find VIP's of the Rock World, with a Harmony in their hands.
Hi, I’m John Anthony, Playing and collecting Cool Guitars is my hobby, and all of my friends and relatives know it. For the reason, I receive many queries over the phone, email and social media about Best Guitar Recommendation. Which one they should buy now, which will fit them etc. And finally, I created this GuitarListy.com and started putting my suggestions and reviews here.

I am a learning myself Shreya.I purchased a Fender Model CF60 (£100) .This is a high quality "Folk guitar" from a reputable long standing company.It's got a lovely mellow tone and the size is not to big.Buld quality is excellent.At the end of the day it's all subjective.I recommend you go to your local musical instrument shop and try a few.All the Best Dean
The hollow body — the original electric guitar design — is completely hollow on the inside, like an acoustic guitar. Hollow-bodied guitars like the Gibson ES-150 saw use in jazz ensembles by players such as Eddie Durham and Charlie Christian, but were also adopted for country, folk and, eventually, rock and roll. If you’re looking for warm, mellow tones, the hollow body is your best bet. That isn’t to say it can’t give you some sweet, raunchy distortion. A proper hollow-body setup can pull off a great classic blues or rock sound, but they are more prone to feedback than solid body guitars.
In the 1920s, the earliest combo amplifiers had no tone controls. The first tone controls were simple, mainly providing treble adjustment. The limited controls, the early loudspeakers, and the low amplifier power (typically 15 watts or less prior to the mid-1950s) gave poor high treble and bass output. Some models also provided effects such as an electronic tremolo unit. In confusion over nomenclature, Fender labeled early amplifier tremolo as "vibrato" and called the vibrato arm of the Stratocaster guitar a "tremolo bar" (see vibrato unit, electric guitar, and tremolo).
When connecting more than one pickup, it’s important to follow the manufacturer’s color codes and wiring diagrams so that the phase relationship is correct. The phase relationship of a pickup is determined by the winding direction of the coil and the polarity of the magnets. The two coils of the traditional humbucker are connected in series with the phase relationship shown in Fig. 1. Most modern Stratocaster® style guitars with three single-coil pickups are supplied with a reverse wound/reverse polarity middle pickup for a parallel hum canceling effect when the guitar is switched to a two pickup position (e.g. neck & middle pickup together) as shown in Fig. 2.

If you’re interested in learning how to play electric (or even acoustic) guitar, you obviously need to pick up an instrument. But that’s only the beginning of the gear you need to get to shredding. Second only to a guitar itself, you’re also going to need an amplifier – the device responsible for projecting the sounds of your chosen guitar. The problem is: for a beginner, this task is as daunting as it is expansive.


Received it right on time. It was a gift for my best friend and it turned out to be a lot more beautiful than expected. The shade of blue looks real classy and different in different lighting ! Yamaha is known for its magical sound and they maintain their name with this piece too! The guitar comes tuned , and sounds absolutely amazing ! Other website reviews say that it's not as loud, I didn't think so. It has a complete resounding sound that is pleasing to the ears ! My friend went in shock at the surprise and I went in shock with the unexpected high quality ! Definitely recommend, as a beginner or a pro, it's an easy to handle guitar that cradles comfortably between your arms and sounds perfect.
Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.

I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?


One of the first solid-body guitars was invented by Les Paul, though Gibson did not present their Les Paul guitar prototypes to the public as they did not believe it would catch on. The first mass-produced solid-body guitar was Fender's Broadcaster (later renamed the Telecaster) first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster. Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and comfortable ergonomics.
×