This mod works great for Strat-type pickups or aftermarket Tele-style reproduction pickups that don’t already have a plate. Some pickup companies make P-90s that don’t have a metal base plate, and these can be twang-ified in this way, too. The best part is that, if you don’t like the sound, you can just peel the plate off and be right back where you started.
If your volume and tone knobs start to make crackling or popping noises through your speaker whenever you’re plugged in, or if the signal is weak, inconsistent, or cuts out altogether in certain positions on your controls, some foreign matter (however minute) has probably lodged itself in your controls. Dust and rust pose the greatest potential threat to any electronic connection.
 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.
The specifications of the neck and string setup dictate the guitar's overall playability. As such, it is important to get a handle of important specs which include scale length (the length by which the string is stretched from the bridge saddle to the nut), nut width, fingerboard radius, and neck profile (shape of the back of the neck). Beginners normally want guitars to play easier, and will prefer those with shorter scale length, thin nut width and neck profile, and flatter fingerboard radius. On the other hand, experienced players will have grown accustomed to a specific neck configuration, if this is your case, you will want your new guitar to have similar specs to what you already like.
When in doubt, reach for the Dummies guide. These standardized, annotated guides have taught countless people to do countless things that were once over their respective heads. Like the Hal Leonard complete guide above, this massive, 648 page door stop includes six different sub-books, including three basics volumes and three genre-specific guides. It’s the everything-to-everyone approach. It might be overwhelming, but at least you’ll have everything you need in one place.

The benefits of owning a combo amp and one or more powered speakers is that a bassist can bring just the combo amp to recording sessions or small venue gigs, but bring the combo amp and the additional powered speaker(s) to large venue shows to add more stage volume. Another benefit of having a combo amp and additional powered speakers is that the bassist could leave the additional powered speakers in the rehearsal space (or, if playing as a house band for a club, on the venue's stage), and only carry the combo amp back and forth from her home to rehearsals or shows, saving time and energy.

But the question remains, was that environment good for the artists or for the equipment? Think of it this way: experienced chefs know very well the value of a seasoned pan or grill. Flip on any show from the Food Network and you’ll see cooks bragging about their 30-year-old griddle and how it imparts an amazing flavor to their corned beef hash. Preparing food leaves behind actual physical substances, unlike immaterial sound waves, so that comparison doesn’t work exactly. But the dirt and dust and grime could certainly effect the equipment. In a similar way, we have to ask ourselves, was that dirty studio, then, a source of inspiration or were the dirty, beer-smelling microphones actually improving the music? Regardless, the studio imbued the recording with an undeniable quality. Many guitar nuts can identify a particular instrument while listening to a song. Recording experts can do the same thing with studios.

The Super Chromonica 270 Deluxe is an updated improvement on the Super Chromonica, featuring tighter reedplate fixtures, thicker reedplates, round holes in its chrome-plated mouthpiece, a smoother slide mechanism which can be remounted for left-handed use, and a round-edged comb for more comfortable holding.[36] The Deluxe is also available with a gold-plated mouthpiece and coverplates, known as the Super Chromonica Gold.[37]
12W1W1x101x61x8amp for beginnersAmpsbest amp for beginnersbest electric guitar amp for beginnersbest guitar amp for beginnersBlackstar Ampsblackstar ht-1blackstar ht-1 comboblackstar ht-1 reviewblackstar ht-1 tube ampblackstar ht-1r ampsCrush PiXguitar amp for beginnersOrange Amplifiersorange crush pix cr12lorange crush pix series cr12lPeavey Ampspeavey solopeavey solo amppeavey solo guitar amppeavey solo reviewPractice AmpsSolid State Ampstube amp for beginnersTube Ampsvox ac4tvvox ac4tv 10vox ac4tv 4w 1x10vox ac4tv reviewVox Ampswhat is a good guitar amp for beginners

I am a guitar player, teacher and composer. I started playing piano at the age of seven. Five years later I had my first guitar performance with a local band. My style was inspired by guitarists like Nuno Bettencourt, Joe Satriani, Jerry Cantrell, Marty Friedman, Zakk Wylde, Steve Vai and Dimebag Darrell. During my career I had many bands and music project, going through different styles of original music and sometimes cover bands. In 2012 co-founded the band Vulgar Bulgar (Pantera tribute band). In 2013 started teaching guitar at Currently freelance guitar teacher, session musician and solo performing artist.

Regarding the PDF download, I have not done so yet, but all of this info is available on the web, in color, ad nauseum. I bought the book to have at my bench so I could refer to it while wiring guitars. I do not have a color printer. I find the thought that, in order to experience what the book OUGHT to look like, you have to download a file, presumptuous, at best. Annoying, at the least.
During World War II, instrument manufacturing at Gibson slowed due to shortages of wood and metal, and Gibson began manufacturing wood and metal parts for the military. Between 1942-1945, Gibson employed women to manufacture guitars. "Women produced nearly 25,000 guitars during World War II yet Gibson denied ever building instruments over this period," according to a 2013 history of the company. Gibson folklore has also claimed its guitars were made by "seasoned craftsmen" who were "too old for war."[13][14]
Washburn is known for producing great value guitars, and they take their reputation seriously. While other guitar builders tend to compromise cosmetics, this company does not hold back on visual details even in the entry-level market. The WD7S shows the company's design philosophy in action, featuring elegant body binding and custom wood inlaid rosette that makes the guitar look far more expensive than its actual price.
On my bench today, a partscaster with a Hamer Slammer neck, Carvin Rail in the bridge, Ry Cooder Dearmond middle, and PRS P90 in the neck. Wasn’t quite right (throbby) with the usual 3 250K pots and an 022 orange drop (i know, i know, but they aren’t that expensive). So, i went with 500K master vol, 500K master tone (found an old ceramic PRS 022 cap too), and an acme blender pot (neck and bridge) in the last position. Now it’s fun. Lots of variety in positions 1, 2, 4, & 5. 3 knobs and a whammy and she’s done.
Same woods sounding different? OF COURSE!!! Look, I’ve been a carpenter for over 30 years and can absolutely inform you that there is a marked variation of characteristics of wood in the same species…density, tap tone, characteristics of how the individual piece reacts to being worked with tools…heck for all anybody knows internal stresses (for example as indicated by how a 12″ wide piece of wood reacts to being ripped down the center…many times both pieces end up being bowed and such) might play a big factor in how said piece of wood sounds musically…shrugs shoulders…
I’m starting at guitar too at sixty years old, my opinion is that it’s not the guitar, but the time put into practicing, you can dup any type of sound with the features from amps, and guitar processors. You can even make an electric guitar sound like an acoustic. I purchased a line 6 150 watt amp, and a processor from line six, and I can dup any type of guitar sound. I built my own guitar
Gibson announced a new interactive computerized Les Paul that produces more sounds, named the Dark Fire. It was released on December 15, 2007. The guitar has a computer integrated into the body and controlled by the “Master Control Knob” (MCK). The MCK allows players to change the pickups and coils, adjust each tone and tunings automatically and simultaneously, even during a song being played. Like the Robot, the Dark Fire features the ability to tune the guitar; however, in an improvement over the Robot, the player can tune it up to 500 times per battery charge, allowing the tuning pegs to adjust themselves to different tuning styles. Using the “Chameleon Tone Technology” Gibson claims this guitar will produce every imaginable guitar sound. In addition to the improved and advanced tuning features, the guitar has three types of pickups which include Burstbucker (humbucker), a P-90 single-coil and a bridge-mounted piezo acoustic, all of which contribute to organic blends of original sounds.
The best way to use this type of book is to just take 15 minutes a day to work through a page or two at a time. You don’t have to find something that requires a lot of study or dedication on your part at this point. Your first priority should be finding a book that gets you thinking about theory as well as helping you develop coordination in both your fretting and strumming hand.

Engineers invented the first loud, powerful amplifier and speaker systems for public address systems and movie theaters. These large PA systems and movie theatre sound systems were very large and very expensive, and so they could not be used by most touring musicians. After 1927, smaller, portable AC mains-powered PA systems that could be plugged into a regular wall socket "quickly became popular with musicians"; indeed, "...Leon McAuliffe (with Bob Wills) still used a carbon mic and a portable PA as late as 1935." During the late 1920s to mid-1930s, small portable PA systems and guitar combo amplifiers were fairly similar. These early amps had a "single volume control and one or two input jacks, field coil speakers" and thin wooden cabinets; remarkably, these early amps did not have tone controls or even an on-off switch.[1]
the product took a while to arrive which i was ok with they let u know ahead of time….however the only instructions is a poorly photocopied over view of the board and a few details of other items…nowhere is the wiring schematic… they give you a foot long one color wire not the 3 color connected wire they show here on amazon… kinda bummed on unfinished instructions…. disappointed with the single color wire i mean the foot switch has 9 openings where are the instructions for that? actually while writing this review i down graded it to a 1 star… i was getting more upset with the lack of instructions….

I took the Gearank scores we have calculated for individual guitars for each brand and combined them using a weighted average to produce a rating for each brand. I can best explain this by saying if a hypothetical brand had 2 models and one of them had 99 rating sources and the other one only had a single rating source then the first model's ratings would contribute 99% of the final rating for the brand. An interesting statistic; we processed more than 17,000 sources for these calculations.
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
For years, Seymour Duncan has provided guitarists with first-rate, handmade pickups and parts that are anything but stock. All of our products are designed and customized to suit the needs of specific musical styles and the musicians thereof. If you’ve got a guitar that doesn’t have a good-quality set of pickups and seems to lack that “extra something” in the tone department, investing in a set of pickups is your first stop.
Semi-acoustic guitars have hollow bodies which give them a warmer and more dynamic range of sounds. They are vulnerable to unwanted feedback as the distorted sound increases the chances of feedback. That’s why we don’t see rock and metal musicians playing a semi-acoustic guitar. Many guitars have solid blocks inside for decreasing the feedback factor. Check out our list of semi-acoustic electric guitars here.
Here we have the very highly respected ... Alvarez Yairi dy91 ... This very unique and beautiful guitar is in AMAZING CONDITION and is based on the RARE exotic Hawaiian Koa tone wood and is one of more ornate & fancy D-45 Martin Drednaught Acoustic the Martin retails for well over $7,500 and this guitar offered here at JVGuitars is the Alvarez Yairi answer and is quite a HIGH END JAPANESE HAND CRAFTED GUITAR by one of the greatest Luthiers in Japan.... Reserve your Rare & Exotic Koa Yairi DY91 Today...this baby is in excellent vintage condition... This is THE DY91 to own... any questions please email me All the best! General specs:About the DY91: These High End Yairi acoustic guitars are Handcrafted for outstanding projection, this example offers enhanced bass response and an articulate high-end register performance. As with this one many are Sculpted from some of the most precious rare sought-after tone woods from all over the world. This example is Hawaiian WoW! Here are the Specs: Handmade in Japan Saddle & Nut: Bone Neck Joint: Hand Fit Dovetail Finish: Gloss Body Style: D-45 Style Slope Shoulder Dreadnought Back & Sides: AAAA Figured Koa Top: Solid German Spruce Neck: Premium grade Mahogany Fingerboard: Bound Ebony Scale: 25 3/8" (645mm) Width at Nut: 1 11/16" Fingerboard Inlay: Large Diamond Bridge: Ebony-Inlaid Body Binding: Ivory & Abalone Soundhole Rosette: Abalone Head Overlay: Figured Koa Pickguard: Black Tuning Machines: Original Yairi Gold Die Cast Finish:Gloss Natural Electronics: None Original Semi-hard shell case: Case candy Included .
HOLLYWOOD, CALIF. (JANUARY 25, 2018)—Fender Musical Instruments Corporation (FMIC) today announced the all-new California Series acoustic guitars, celebrating the lifestyle and culture associated with the region and the brands Southern California roots. Energetic and independent, this family of guitars defies acoustic guitar conventions with a visible look and feel of Fender’s famous electric guitars – from the Stratocaster® headstocks and vibrant colors, to the distinctive Fender body shapes that mark players as visionary artists. Lively-sounding – California Series acoustic guitars capture the laid back, yet energetic California lifestyle – from the beach to the festival stage.
In order to trigger these notes, a MIDI guitar controller is needed. Alot of work just to recreate what you can do on a real guitar. The only advantage to this technique, is the ability to take a MIDI track, creating this way, and substitute different guitar models to audition what might sound best. Also, the MIDI guitar track can also serve as an educational tool and how a part is performed.
The so-called modeling amps can be said to differ from both tubes and solid state ones as they employ modern processing technology to apply preloaded characteristics to the sound. This can alter the output in a variety of ways, from imitating certain classic styles to rendering something entirely new. Needless to say, they are favored by cover bands and electronic music fans, but many guitarists don’t appreciate their “artificial” sound, although they can serve as good practice amps.   
Rickenbacker has produced a number of uniquely designed and distinctively trimmed acoustic guitars. Although a small number of Rickenbacker acoustics were sold in the 1950s and were seen in the hands of stars like Ricky Nelson[9]and Sam Cooke,[10] the company concentrated on their electric guitar and western steel guitar business from the early 1960s onward. From about 1959 through 1994, very few Rickenbacker acoustic guitars were made.
The key elements of mic positioning are distance from the source and orientation to it. Moving the mic closer to the amp provides more definition, increased highs and lows, and less room sound. As you pull the mic back, the sound becomes less detailed, more "midrangey," and more blended with the ambience. Depending on the room you're in, a distant-miked amp may gain a natural presence and unique character in the mix, despite an apparent decrease in definition. On the other hand, placing the mic too far back will result in a washed-out, murky, or hard-to-control tone.

At that time European craftsmen operated under the guild system. The guitar (in its modern form) was a relatively new instrument, and most guitar makers were members of the Cabinet Makers’ Guild. The Violin Makers’ Guild claimed exclusive rights to manufacture musical instruments. The Violin Makers’ Guild filed appeals on three occasions – the first in 1806 – to prevent cabinet makers from producing guitars. Johann Martin is mentioned in a surviving submission dated 1832.
The previous drawing illustrates the electrical and magnetic function of a single-coil pickup. Some pickups might use six permanent magnets in place of the six pole pieces to create the magnetic field, but the idea is the same: create a steady magnetic field around a coil in proximity to the guitar string. The name "single-coil" pickup becomes more significant when compared to the humbucker or "dual-coil" pickup.
If you want to combine the dynamics of a well-recorded drum kit with the pumping excitement you get from heavy compression, send either the overheads only or the entire kit to a buss and insert a nice-sounding compressor there. Set the compressor to a high ratio and low threshold and mix in some of this with the song. You may need to adjust the attack and release controls to get the effect you're after, but you don't need to blend in much of the compressed sound to really add punch and weight to a drum track. Nicholas Rowland
Arch top body size is equivalent to the flat top 000 body size, 15" wide across the top, carved sruce top, back is not carved but is arched by bracing, rosewood back and sides, unbound elevated tortoise pickguard, style 28 type multiple bound top and back with white outer layer, zipper zigzag backstripe, trapeze tail piece, rosewood fingerboard, vertical "Martin" peghead logo, nickel plated parts, sunburst top finish.

Fretsizes can be confusing.  They are small measurements but have a big impact on feel and the size designations can vary.  Its best in my opinion to think and talk of frets in their actual crown widths and heights rather than the old Dunlop numbers (the originator of the 6xxx numbering system) as they can mean different things to different people; i.e. Warmoth lists 6105 as .095-.047" while USACG has is at .090-.055" - these are two very different feeling fretsizes. 
You don’t need to be the new Bob Dylan of lyrics to write a song. Writing a song with your own lyrics and vocal melody will help you learn how your guitar fits into songs. Phrasing, space, when to play rhythm, when to think about any solo (see 13), chord changes etc. You don’t have to share it. But do it for yourself. It will help you understand songs much better.
If you decide to use my link to Guitar Tricks when you sign up as a member, I will receive a compensation for my referral. I am not a professional reviewer and my views are biased because I only recommend stuff that I use and like. I appreciate if you follow my links to Guitar Tricks if you like I Really Like Guitars and my review of Guitar Tricks. Thank you!

I personally use Vegas, Sonar, and REAPER. I would not recommend Vegas or Sonar for live playing, if for no other reason than both have crashed on me during recording sessions, and I do not easily forgive that. REAPER (Audio Production Without Limits) never, ever crashes. It’s not as full featured as some DAWs, but what it does, it does well. I use it for all my recording.
The Limited Edition Slash Firebird Premium Outfit also features Epiphone's rock solid nickel hardware including a classic Epiphone LockTone ABR Tune-o-matic bridge and Stopbar tailpiece, Kluson Reissue Firebird Banjo-style machine heads with a 12:1 ratio, a Switchcraft 1/4" output jack, and Epiphone Straplocks. A standard Epiphone hard case is also available.
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
One difference today is the number of big-name guitar brands that make affordable acoustic and electric guitars, which are often versions of their pro-level instruments. These days, you can own a Les Paul or a Stratocaster as a beginner or intermediate player. Of course, they aren’t the same as the Gibson or Fender flagship models, but they are still darned good guitars based on those designs.
The newly designed Les Paul Recording guitar was released in 1971, in many ways as an updated version of the Les Paul Professional that had debuted two years earlier in 1969. The new guitar came with a new owners manual explaining the (somewhat complicated) controls, their operation, and giving other specifications, including recommended strings, action and control settings. Compare with the broadly similar owners manual for the Les Paul Personal / Professional
Equalizer: An equalizer is a set of linear filters that strengthen ("boost") or weaken ("cut") specific frequency regions. While basic home stereos often have equalizers for two bands, to adjust bass and treble, professional graphic equalizers offer much more targeted control over the audio frequency spectrum.[64] Audio engineers use highly sophisticated equalizers to eliminate unwanted sounds, make an instrument or voice more prominent, and enhance particular aspects of an instrument's tone.[65]
Thinking out loud... what defines electronics then? I've always assumed that the pickups, caps, pots, etc. inside an electric guitar constituted an electronic system. The "guitar's electronics" facilitate a deliberate flow of electrons through a circuit with semi-conductors, etc. Heck, with coils and magnets (and sometimes battery packs), they also provide the electricity that's conducted through the system.
Firebird is one of those less known, but legendary Gibson models. The 2016 version brings the core of what this bodyshape is all about, with more modern components. Even though my experience with Gibson Firebird is very limited, it’s one mighty guitar. It comes with mini humbuckers, and the sound is pretty unique. You can play anything from rock to metal on this bad boy, without being limited in any way.

Many modern players use the first joint of the thumb against the back of the neck, and almost on the upper binding, sort of like gripping a baseball bat, so they can reach over the neck with their thumb tip to play bass notes on the E and A strings while picking melodies out with the other fingers. Tommy Emmanuel, and Andy McKee are particularly adept at this. You’ll need to experiment some to find what works best for you.

DRILLING THE NECK HOLES ON THE BODY Before you do this you can carve down the back of the neck area if that is something you were going to do. If you are just going to leave it flat then that's ok too. The first step if you are using furreles is to map out where you want to place them and then mark the center of the hole where the screw will go. Then take your forstner bit drill enough to fit the furrele inside. Usually you can tell how deep to go if you drill a little at a time, and place the furrele in it to see if it is just low enough in the hole not to see the top of it if you look at the body horizontally or it is flush with the wood. After doing this you can drill the holes for the screws. Use a bit that has the same circumference as the screw including the threading so when you put the scre into the hole it just passes through with out you having to screw it in. Drill in the indention that was left by the tip of the Forstner bit, keeping the drill as straight as possible.
The world is full of amps. It is so full of them in fact that it is somehow hard to choose not because there is not enough good ones, but too many of them. Which is very unfortunate, as it raises the entry level requirement for understanding what you are buying. This means that a whole lot of people get intimidated when trying to pick an amp. Like if they want a mini amp that they would want to carry with them when they go somewhere. Which is why I sat myself down the other day, bargaining all the while, and compiled a list of the best small guitar amps, for the sake of all the big musicians trying to play them. Hopefully at least some of you will find it more or less useful, since I had to categorize these according to price, sound quality, tone quality, comfort of use and even the general usefulness. What I am trying to say is, it was a lot of work.
In terms of usage, it is quite similar to the mini Strat guitar we discussed earlier. It is a great choice for someone who just wants a cheap electric guitar for practice or someone who is an absolute beginner. Also, it is one of the best choices for five to fifteen years old kids wanting to learn guitar. It comes with small ¾ sized bodies and a 22.75inch of scale length. It has a c shaped fine maple neck with its 20fret fingerboard. 
Fender instruments like the Stratocaster and Telecaster feature bolt-on necks and brighter tonewoods such as alder for the body and maple for the neck. They are easy to work on, and an owner with even a small degree of technical knowledge can fit replacement parts without professional assistance. Fender guitars are built to a 25.5-inch scale length, which lends to their brighter, more percussive tone. You’re more likely to see tremolo systems on this type of guitar, and hot-rodded guitars known as superstrats fall into this category.

I had a 1984 Jackson Randy Rhoads Custom with a serial # in the low 400′s…that thing would sing on a note with high gain and boost with a TS-808 Tube screamer like a Sustainiac guitar…problem was the bridge was mislocated and it wouldn’t intonate correctly…sent it back…made them replace it with a new guitar (didn’t want plugs in it)…the new one had (ermmm…still has as I still own it) the EXACT same pickups, hardware down to the tuning machines, etc…EVERY single piece of hardware was moved over to the replacement (and in the case of the bridge pickup it is a proven fact as that was/is a retail version of an SH-6 wired for series/single coil/parallel…along with the pickguard with the additional hole for switch)…same types of wood used (3 piece maple neck through construction with poplar wings) yet the replacement has NEVER sung on a note. So what does that say? I have to say that the replacement does sound “better” overall in some intangible way…glassier I guess…longer sustain…yet it REFUSES to go into a sustained feedback loop.
When I first plugged it in, it made a sound like it was "fretting out" if you put a bar at the twelfth fret position. That's a pretty good feat, given that the guitar has no frets. It turned out that someone had cranked up the pole pieces for extra gain, but had cranked them so far that the strings made contact with them when the guitar was played. A quick tweak right in the store with a jeweler's screwdriver sorted them out and revealed the lovely vintage sound of this little beastie. Supro developed a neat strings-through pickup system with staggered pole pieces that this guitar features.
Teisco first began importing guitars to the United States under their own brand in 1960. In 1964, the company then switched the name of their U.S. brand to Teisco Del Rey. The company was then sold in 1967, and the Teisco brand name stopped being used for guitars sold in the United States in 1969. Guitars were still sold under the Teisco name in Japan until 1977.
Bass guitars (like guitars) in many ways are like cars. Their appearance is a major factor in your buying decision. But also like cars, especially for the first-time buyer, there are far more important factors to know about in order to ensure you buy a bass guitar that is both properly playable and that stays in tune, enabling you to make progress with it. 

Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. Guitars may have a fixed bridge or a spring-loaded hinged bridge, which lets players "bend" the pitch of notes or chords up or down, or perform vibrato effects. The sound of an electric guitar can be modified by new playing techniques such as string bending, tapping, and hammering-on, using audio feedback, or slide guitar playing. There are several types of electric guitar, including: the solid-body guitar; various types of hollow-body guitars; the six-string guitar (the most common type), which is usually tuned E, A, D, G, B, E, from lowest to highest strings; the seven-string guitar, which typically adds a low B string below the low E; and the twelve-string guitar, which has six pairs of strings.