A noise gate is a very handy device that gets rid of hums and hisses that may become apparent when you're plugged in but not playing your instrument. Basically a limiter in reverse, the noise gate simply cuts out sounds below a preset level. As long as you're making music your sound is full on; but as soon as you stop playing, all the noise generated by your effects chain, vintage amp, and/or house wiring is silenced.
Guitar amplifier design uses a different approach than sound reinforcement system power amplifiers and home "hi-fi" stereo systems. Audio amplifiers generally are intended to accurately reproduce the source signal without adding unwanted tonal coloration (i.e., they have a flat frequency response) or unwanted distortion. In contrast, most guitar amplifiers provide tonal coloration and overdrive or distortion of various types. A common tonal coloration sought by guitarists is rolling off some of the high frequencies.

Continuing the example of making comparisons of specifications, there are Guilds in this price range that come with all solid woods, a rosewood fretboard, and with built-in tuners. Also, Epiphone Masterbuilt has solid wood acoustics, even some with cedar tops which are highly sought after by finger style players, plus they have a rosewood fretboard, a built-in tuner, two pickups and deluxe tuning machines. Moreover, both of the above guitars sell for less than the Taylor 200 series model you listed. So which is better?

Ok, whoever downvoted me needs to explain their reasoning, since I clearly laid out my reasoning. The person said they're interested in punk/rock/experimental, and there's no possible way you can tell me that a multi-fx pedal is better than a Big Muff and/or a DD3 delay. I will laugh in your face and point if you suggest such a thing. You could get both pedals for the price of any multi effect pedal, they hold their value, and they sound great. If you don't like a Muff, whatever, swap it out for a Rat. – Dan Gayle Aug 1 '14 at 17:39
In 1966, Teisco guitars shed some of its adolescent awkwardness of the early ’60s in favor of a svelter, hipper look. While some of the tubby bodies and monkey grips remained, they were joined by leaner shapes, thin, pointed, flared cutaways and German carve contours. In many ways, the ’66 Teisco line is the quintessential year for Teisco, which is fitting since it would be the last under the original ownership.
Directional mics, such as cardioids and figure-of-eights, exhibit different frequency responses off axis — broadly speaking, off-axis sounds tend to be duller, although it's a complex effect which is different for each model. Professional producers are well aware of this, and employ the effect to refine their sounds. For instance, Chuck Ainlay comments "I'll usually start with a [Shure SM57] on the amp; but not straight on axis with the middle of the speaker; it's usually off-centre, angled towards the middle of the speaker and generally just off the grille." Jay Graydon refers to a fairly similar setup: "I position the mic about one inch left of the edge of the speaker-cone centre, using a 22-degree angle, and about one inch back from the grille cloth." Andy Johns, on the other hand, has said that "the miking technique I used on electric guitars for years was two [Shure SM57s], one straight on, and one at 45 degrees. Put 'em together, and it always works."
Both guitarists have been a large part of the Montgomery Gentry sound since the beginning. Garrett had been working the bars in Lexington, Kentucky and ended up becoming the first-call guitarist for singer Troy Gentry. When he and Eddie Montgomery teamed up to conquer the Nashville music scene, Bo was the natural pick for lead guitar. When the time came to expand their sound by adding a second guitarist to embrace their Southern Rock roots, bassist Andy Bowers recommended his brother Frank. Being the consummate professional that he is, Frank did his homework and nailed the material his first day out, earning him his spot on stage with the group for more than eleven years now.
If you can afford to start on an amp in the sub-$200 segment, you will see an instant upgrade in the amount of power as well as additional features. In this category you are looking at very good practice rigs, although as power is still pretty low they may not be suitable for more than small casual performances. This is the first category where you will find both amp heads and tube amps, although the choice of these is very, very limited. One of the best amps you can grab for under $200 is the Marshall Code 25W. This combo provides a solid tone, 25 watts of power and plenty of amp voices and effects to play around with.
Guitar amp modeling devices and software can reproduce various guitar-specific distortion qualities that are associated with a range of popular "stomp box" pedals and amplifiers. Amp modeling devices typically use digital signal processing to recreate the sound of plugging into analogue pedals and overdriven valve amplifiers. The most sophisticated devices allow the user to customize the simulated results of using different preamp, power-tube, speaker distortion, speaker cabinet, and microphone placement combinations. For example, a guitarist using a small amp modeling pedal could simulate the sound of plugging their electric guitar into a heavy vintage valve amplifier and a stack of 8 X 10" speaker cabinets.
Variable caps used for radio tuning have about 1000 times smaller capacitance than needed for guitar tone controls. The advantage of a variable cap, could one be made in the right range for guitar, or those many-caps-on-a-rotary-switch, is that the resonant peak is maintained regardless of setting. With Joe’s “cap fader”, that peak gets flattened out in the middle of the pot rotation. Doesn’t mean it’s a bad sound, but certainly different.
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
In my opinion, I don't think this guitar is quite worthy of all of the rave reviews here, based on the thin sound. I bought this because my Zager needs to go in for new frets and I have to wait until May to get it worked on, and wanted to get something inexpensive to use in the meantime. This is a beautiful instrument, no doubt. The finish is stunning, it's very nicely made and ready to play out of the box, so on that level I would give it 5 stars. But soundwise, for me I'd say 2 and half stars. The bottom end is nowhere to be found. I tried to switch to the same strings I am using on my other guitar and it's no different. This guitar has about the same dimensions as my Zager, but nowhere near the same bass response. It'll do fine as
Used Instrument Buyer - [New Window] - When it's time to sell your used instruments, nobody makes it easier than UIB. We make our best offer up front, right out of the gate, so you know you're getting top-dollar for your used musical equipment. Since 2006, we've helped everyone from professional musicians to weekend guitar warriors get the most value out of their used instruments. We offer free no-obligation quotes for your used equipment. upon your approval, simply pack your equipment, ship it to us free, and we'll promptly mail you a payment.

In 1956 Jennings was shown a prototype guitar amplifier made by Dick Denney, a big band guitarist and workmate from World War II. The company was renamed Jennings Musical Industries, or JMI, and in 1958 the 15-watt Vox AC15 amplifier was launched. It was popularised by The Shadows and other British rock 'n' roll musicians and became a commercial success.

Vox's first electric guitars, the Apache, Stroller and Clubman were modelled after solid-body, bolt-neck Fenders, which at the time were not available in the UK. A four-string Clubman Bass followed shortly after. These first guitars were low-priced, had unusual TV connector output jacks and were produced by a cabinet maker in Shoeburyness, Essex. Vox president Tom Jennings commissioned the London Design Centre to create a unique new electric guitar, and in 1962 Vox introduced the pentagonal Phantom, originally made in England but soon after made by EKO of Italy. The first Phantom guitars were given to The Echoes to trial and were used by them until 1970. They were used on many of the recordings by The Echoes and records they did with other artists such as Dusty Springfield. Aside from the unusual body and headstock shapes, Phantoms featured copies of the Fender Stratocaster neck and its attachment, the Strat's three single-coil pick-ups and standard vibrato bridge that in this case copied a Bigsby unit. Aside from being a bit awkward to hold for seated playing, the Phantom guitars now approached professional quality, performance and price. Phil "Fang" Volk of Paul Revere & the Raiders played a Phantom IV bass (which was eventually retrofitted with a Fender neck). It was followed a year later by the teardrop-shaped Mark VI, the prototype of which had only two pick-ups (rather than three) and was made specifically for Brian Jones of The Rolling Stones, again using a Bigsby-like "Hank Marvin" bridge. By the end of the decade, Stones bassist Bill Wyman was shown in Vox advertisements playing a teardrop hollow-bodied bass made for him by the company, subsequently marketed as the Wyman Bass. Many guitar gear authorities dispute that he ever actually used the instrument for recording or live performance. See also Vox Bass Guitar. Vox experimented with built-in effects and electronics, with guitars such as the Cheetah, Ultrasonic, and Invader offering numerous built-in effects. Ian Curtis of Joy Division is known to have owned two white Vox Phantom VI Special effects guitars which had push button effects switches on the scratch plate. Amongst many innovations were the Guitar Organ, which featured miniaturised VOX organ circuitry activated by the contact of strings with fret contacts, producing organ tones in key with guitar chords. This instrument was heavy and cumbersome with its steel neck and external circuit boxes, and rarely worked correctly, but was a hallmark of the ingenuity of this company.
Many acoustic guitars come equipped with "light" gauge acoustic guitar strings. This is probably a good place to start - if you are a heavy strummer and find yourself breaking strings often, you may want to consider buying slightly heavier gauged strings. The following is a list of the standard string gauges included with each set of acoustic guitar strings.
Great post man. I’ve been playing guitar for close to 15 years and when I was just starting out it was tough to know where to begin when it comes to tone. So many people advised me on getting a bunch of gear and spending money on amps, pedals and other enhancers but for me when I was just starting out it would have been great to read something like this!
Considering that all of the other small-sized guitars we tested were much flashier, I was shocked when our teenage testers, Alana and Charles, both picked the Epiphone Les Paul Express as their favorite short-scale model. It turns out our younger panelists didn’t care at all about the style of the guitars, they cared about comfort—and for them, the Les Paul Express was as comfortable as an old sweatshirt.
There you go! That's the way to go about it. Now keep practicing till you get perfect. I am sure you would get these bass guitar tabs for beginners in few attempts. These were some of the best guitar tabs for beginners. There are some best acoustic guitars for beginners that you can select among the different types of guitars. Buy the best guitar, so that you do not come across any problems later on. You could also purchase some guitar tab software and practice the notations. There are many musical sites that provide you with free guitar tabs and tutorials, that you can refer to. They may also help you get a broader view on how to play guitar tabs. Learning any instrument is fun and helps you overcome fatigue, thus rejuvenating your power and mood. You can definitely trust me on that!
Gibson offers a whole variety of models, but if you want to experience this brand, Gibson Les Paul Standard is a must. This is as old school as it gets from a brand new guitar. The finish on this one is Cherry Sunburst, which is as iconic as the model itself. With two PAF humbuckers, you get to experience the vintage tone that launched Gibson into stardom.
The company has been run by the Martin family throughout its history. The current chairman and CEO, C.F. ‘Chris’ Martin IV, is the great-great-great-grandson of the founder. The firm was the first to introduce many of the characteristic features of the modern flattop, steel-strung acoustic guitar. Influential innovations include the Dreadnought body style and scalloped bracing. Some time in the 1970s, Martin bought Levin guitars[1] and around 200 D-18’s were apparently built in Sweden; they are stamped LD-18[citation needed].

Valco manufactured Spanish acoustic guitars, metal-bodied resonator guitars, electric lap steel guitars, and vacuum tube amplifiers under a variety of brand names including Supro, Airline, Oahu, and National. They also made amplifiers under contract for several other companies such as Gretsch, Harmony, and Kay. In the 1950s they began producing solid body electric guitars.
All of the guitars on this list except for the Blueridge BR-160 are equipped with an electronics system that make them stage- and studio-ready. You can simply plug and play when you need to perform in front of an audience in a crowded or big venue where there’s a lot of ambient noise. If you don’t need amplification – for example if you’re just practicing at home – these guitars sound great unplugged as well.

While the Line 6 PODHD500X is no longer the flagship guitar processor, it is still very much in demand in the market, as evidenced by the overwhelmingly positive response that it continues to get from users and expert alike. It follows after its predecessor, albeit with a more powerful CPU and improved interface via colorful LED rings around the footswitches.
Ovation backed off from its more exotic design directions and in ’77 introduced two more conservative models, the Preacher and the Viper, and its first solidbody basses, the Magnum I and II. The Preacher featured two equal cutaways, whereas the Viper sported more of a Les-Paul-style single cutaway, though neither would never be confused with a Gibson equivalent. Their shape was, in fact, essentially a downsized version of the Ovation acoustic outline. The Magnum shape was derived from the earlier Breadwinner and Deacon, with more contouring.
In Part 4 of Gibson’s Effects Explained series we’re going to look at modulation effects. This group includes phasing, flanging, chorus, vibrato and tremolo, rotary speaker effects, and octave dividers, the latter of which I have loosely grouped in here because … well, they don’t fit in overdrive or delay, do they? Later analog versions of the first three of these—phasing, flanging, and chorus—do, as a matter of fact, use much of the same technology as echo and delay units, although with chips having shorter delay times, but it makes sense to include them here because their obvious sonic characteristics are of a type with other units made from very different kinds of circuits. Most such effects were developed in an effort to add depth, dimension and movement to the guitar’s natural sound without necessarily distorting it, strictly speaking. A few noteworthy types also developed from effects that were in use on the electronic organ. This is another big category, so we’ll split it into two chunks.
I think singing with confidence without too much doubt was a satisfying thing. It was, artistically, very satisfying to be covering subject matter that means something to me. I think a little bit of that was getting to know yourself. And just the simple fact that I was ready to do it now. Everything else I'd done since going out on my own in '87 has been absolutely amazing to me, and I feel like the luckiest guitar player alive, and I am very grateful.
The Seagull Maritime Solid Wood Series of acoustic guitars are designed to offer the features and benefits of the brand’s higher-end Artist Series of guitars but at a more affordable price point. The Maritime SWS guitars are offered in a variety of shapes such as mini jumbo, folk and dreadnought, and come in two custom-polish finishes: high-gloss and semi-gloss.
Most metal guitarists would kill to have half of the power and precision of James Hetfield’s right hand, not to mention his ability to write the most devastating riffs known to mankind, from “Seek and Destroy” and “Creeping Death” to “Enter Sandman.” Of course, most musicians with skills comparable to Hetfield’s have such big egos that they become the targets of our murderous intentions. That’s not the case with Hetfield.
To cut to the chase, we can say that a changing magnetic field generates or "induces" electricity. It's also true that a changing electric field generates magnetism. If you feed electricity through a coil of wire, you generate a magnetic field around it. That's how you can make a magnet controlled by electricity—better known as an electromagnet. Electricity and magnetism are really two different aspects of a single phenomenon: electromagnetism.
Secondly, I have an Epi Les Paul 1960 Tribute that i had PLEKD, which made a big difference to how it plays. However; i have an ongoing issue with it since, the G string always plays muted - i have changed the strings several times since but to no avail, other than that it plays really well in my opinion albeit i am only a learner with little experience. I have gone through the steps in your article but again all to no avail - have you any ideas as to what may be causing the muted tone (that's how i'd describe it anyway) and any thoughts on a possible solution you may have would be welcomed.
The Yamaha Pacifica has long proved a benchmark for quality and specification, and the 112V remains one of the best guitars for beginners. The 112 is far from fancy and simply concentrates on the bare necessities. Yet the construction is of excellent quality. Trust us, if looked after this will be a guitar for life. By design it's an altogether more modern, brighter and lighter take on a hot-rod Strat. But when we say brighter that doesn't mean overly shrill. In fact the bridge humbucker will surprise some, it's beefy without being too mid-range heavy and although the coil-split proves a little bland played clean, with a distortion boost it's a pretty useful gnarly and wiry rhythm voice. It's good to have the choice too when mixed with the middle pickup - switching between the full and split coil here is subtle but, especially with cleaner 'class A' amp voicings, there's enough character difference to be useable. The solo single-coils impress - plenty of percussion and with a little mid-range beef added from the amp these get you to the correct Texas toneland. Neck and middle combined produces a fine modern Strat-like mix - the added brightness will cut through a multi-FX patch nicely.
Terry Kath and Stevie Ray Vaughan for me over anyone on that list but Jimi. I’ve seen Page, Clapton, Billy Gibbons, Brian May, David Gilmour, Steve Howe, Eddie Van Halen, Buddy Guy, Keith Richards, Pete Townshend, Mick Ronson, Kerry Livgren, Joe Walsh, Don Felder and Carlos Santana among others. Totally subjective as is all art and I have weird taste.
When we talk about instruments, sometimes the guitar gets all the credit. Of course guitars are great, but an electric guitar on its own—even a hollow-body—is only so loud. For giving one of the world's favorite instruments its voice, guitar amplifiers deserve a little love too. These amps and speakers are the powerhouses of your audio setup, turning your guitar's output from a simple electric current into those familiar sounds.
While some effects can create a drastic change in a signal’s sound, other effects act more like a coating that add subtle variations of texture rather than a huge makeover. Texture-adding pedals like time-based or ambient effects – such as reverb, delay/echo, vibrato, flanger, and chorus – work best when added to something much more pronounced instead of the other way around (which in a signal chain means they go towards the end).

Pedals allow instant variables, with built in effects you have to dial it in every song, I can turn on a chorus on the verse add fuzz on the hook and manage combinations in real time, much more flexible. Also boutique pedals like earthquaker devices and Devi Evers create much more complex sounds within each pedal, it really helps when u are trying to cultivate your own sound.
These are the settings I use as my basic rack for adding rock guitar sounds in Cubase, and you might also find it handy as a point of departure, so it's worth saving as a track preset. To do this, right‑click in the audio track containing the 'rack', and choose 'Create Track Preset' from the context menu. When the Save Track Preset dialogue box appears, simply name it and save it: now you can call up your rack for any audio track in any Cubase project!
Dorado instruments are of decent quality, but are often found at slightly inflated asking prices due to the attachment of the Gretsch name. Remember, these are 1970s Japanese guitars imported in by Gretsch during their phase of Baldwin ownership! Dorados are sometimes rightly priced between $125 to $175; but many times they are tagged at prices double that. Of course, what a guitar is tagged at and what it sells at (cash talks, baby!) are always two different animals.
Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-...  Click To Read More About This Product
Dude, John Mayer? unbelievable. Angus young, Gary moore I agree Eric Clapton you bet. but, it is an opinion. I think Michael Schenker is badass, and what about Steve Morse. I just saw Rush in Rio, and I forgot just how good Alex lifeson is. What about George Lynch? Tony MacAlpine. so I will let you have John Mayer, because he makes you feel something, for me, it's nausea…..Oh, and I forgot Brian May. Doyle Bramhall, I could go on.
Whether you are a beginner or a professional, you can find the right strings for your level and guitar type. Thinner string gauges are typically better for beginning musicians because they are easier to bend with an uncalloused hand. If you are looking for strings to stand up to heavy shredding and produce more volume, then thicker gauges are what you are after.
The guitar's history mirrors the cultural values, preoccupations, and norms in the United States over time. So, too, does the guitar's design, especially since the development of solid-body guitar construction by the 1950s. Because the sound produced by solid-body electrics does not depend on their shape, makers could experiment with a wider range of guitar designs. This era's seemingly radical instruments echoed the popular cultural focus on space-age modernity. The Fender "Strat" recalled the modern tail fins and imaginative colors of Detroit's cars, while the Gibson Flying V literally appeared ready for takeoff.
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones.

Standard tuning but with the 6th string dropped one full step. Utilized by bands and/or artists: Radiohead, Avenged Sevenfold, Arrowmont, Kvelertak, Led Zeppelin on "Moby Dick", Jack White on the song "High Ball Stepper", Rage Against the Machine, Prayer for Cleansing, Lamb of God, Underoath, Evanescence, Silverchair, Muse, Skillet, Helmet, Soundgarden, Metallica on songs "All Nightmare Long" and "Just a Bullet Away", Rammstein, Fugazi in some songs, Tool in all their albums (except Prison Sex which is Drop B in standard variation Tuning and Parabol/Parabola which has E dropped to B and A dropped to E), C3 Church on their song Breathe, as well as numerous songs on older albums Stone Temple Pilots in some songs, Audioslave, Filter, Foo Fighters, Porcupine Tree, Incubus in some songs, Guns N' Roses on the title track and "Better" from Chinese Democracy (most of the rest of the album was in E♭ tuning), Black Veil Brides (on the song "Knives and Pens"), The Devil Wears Prada, Nirvana in some songs, Zakk Wylde in some of his projects, Quicksand, Alesana, Eyes Set to Kill, and The Beatles on "Dear Prudence", Iron Maiden on "If Eternity Should Fail", Jorma Kaukonen of Jefferson Airplane on Embryonic Journey from the Surrealistic Pillow album, All Time Low on the biggest part of their discography.

Altium is known for it’s high end PCB development application called Altium Designer which starts at around $7000 and there’s a yearly subscription fee too. Gulp! Altium Designer is used by many industry professionals for product development. Altium just recently released Circuit Maker, which has many of the features of Designer and is, Gasp!…. Completely free!  The trade off at this point seems to be that it’s designed around a community and apart from a couple of private slots, you have to share your work, so it’s not very useful for completely proprietary projects.
With that budget you can look about anywhere you choose. Try epiphone, maybe a boutique builder along the lines of your ideal, even a good kit that you rough in and take to a great tech/Luthier to trim finish….but about the Gibson…play em yourself, don’t get upset by a bunch of rumbling that’s largely bad noise. What your hearing is chatter largely perpetuated by their competition. They had a rough patch when they had ALL their imported wood jerked out from under them do to a screw-up of paperwork, wouldn’t at all surprise me if the government changed the rules and didn’t tell anybody(again). You can imagine what Gibson had to do to stay afloat, compromise was inevitable. I’m sure they more than anyone regret that, but you know everyone else in the industry was plenty happy to keep the scuttlebutt going, they ALL hate you when you’re on top. She. I was with strings and things of Memphis, Gibson came out of packing set up beautifully, usually perfectly in tune or nigh on to it. No other maker came close at all. By the way , I’m not a Gibson guy, the only one I’ve had is for sale, I prefer a more modern platform, that’s just my preference. But I still have to give props where they’re due…say, if your interested in an SG ’67 reissue at a good price, hit me up. I’ll give you the skinny on it, all right and wrong, and beat the brakes off any price from a shop!
Many web surfers contact me looking for a wiring diagram for an unusual / no name / import guitar after having no luck online. And sometimes you aren't going to find it, however, if you have an electric guitar that is similar to lets say a Strat ... it has 3 single coil pickups (and they are 2 wire pickups), one 5 way switch, 2 tone pots and 1 volume pot then you can simply use a Strat wiring diagram. It's often easiest to think of the instrument in terms of components not brand.
The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.
12W1W1x101x61x8amp for beginnersAmpsbest amp for beginnersbest electric guitar amp for beginnersbest guitar amp for beginnersBlackstar Ampsblackstar ht-1blackstar ht-1 comboblackstar ht-1 reviewblackstar ht-1 tube ampblackstar ht-1r ampsCrush PiXguitar amp for beginnersOrange Amplifiersorange crush pix cr12lorange crush pix series cr12lPeavey Ampspeavey solopeavey solo amppeavey solo guitar amppeavey solo reviewPractice AmpsSolid State Ampstube amp for beginnersTube Ampsvox ac4tvvox ac4tv 10vox ac4tv 4w 1x10vox ac4tv reviewVox Ampswhat is a good guitar amp for beginners
Fender also supply a variety of signature models, each with specifications similar to those used by a well-known performer. Custom Artist guitars are the Custom Shop versions of the Artist Series line, which significantly differ from the standard production models in terms of quality and construction, making these instruments much more expensive. As well as the other Custom Shop instruments, the Custom Artist guitars are available either as Team Built or Master Built items, some being exact replications of the specific artist’s original instrument, better known as “Tribute” series (featuring various degrees of “relicing”, such as Closet Classic, New Old Stock, Relic and Super Relic treatments, depending the model). Artists with models available in the signature range include:
Playing power chords right up at the ‘dusty' end (past the 8th fret) gets difficult, because the frets are so close together. In the next stage we'll learn how to play power chords with a fifth-string root too, which solves that problem. However, it's important not to rush ahead, so make sure you put your effort just into the sixth-string root chords for now.

The earliest documented performance with an electric guitar was in 1932, by guitarist and bandleader Gage Brewer. The Kansas-based musician had obtained two instruments from George Beauchamp of Los Angeles, California, and he publicized his new instruments in an article in the Wichita Beacon, October 2, 1932 and through a performance later that month.
Jacob - it really depends on several factors: how much money you have to spend, type of music you like to play, electric or acoustic. You can get started with a $100 acoustic of various branding with decent quality or a basic Squier Strat for $100-150 if you want electric for many styles. Epiphone makes Les Paul and SG models for $100 and up for a little more rock and roll edge - its all a choice of your style.

Pedalboards are just plain fun. You can mix and match any number of little boxes and really personalize your tone. We are living in the golden age of guitar pedals right now with such a huge variety of effects out there. The majority of effects fit into one of the following categories: gain (overdrive, fuzz, distortion, compression, clean boosts), filter (wahs, auto-wahs, envelope followers), and time-based (delay, reverb, chorus, flange, phase).

Here we have a sweetie from the late 1970s folks they just don' make them like this anymore this is the RARE High End Lawsuit 5053 model this model was discontinued decades ago. This guitar was made nearing 40 years ago of woods said to have been aged 20-30 years at time of its being built.... food for thought. Fresh release from the JVGuitars Vintage Vault is a beauty seldom seen in this configuration and in this condition we have collected many 5053 Alvarez lawsuit era guitars not all are like this one is SPECIAL this is a must see and hear beauty! Based on the Martin top of the line D-45 this Japanese crafted D-45 copy was crafted with top workmanship only the top luthiers were allowed to use this precious expensive aged Brazilian Jacaranda rosewood on this guitar its back - sides - fingerboard - bridge and headstock are ALL made of this exotic tone wood, the neck looks to be a high grade Honduran Mahogany and proudly still displays it's original imported by Saint Lewis Music gold Medallion and fancy SLM truss rod cover see pics The top is Solid Sitka spruce this guitar is detailed and adorned with much perfling and inlay top to bottom including its fingerboard and headstock, this example is in top playing condition and cosmetically excellent as well and is VERY RARE in deed to find one so excellent. The neck is a nice handful like the old Martin a medium slim profile, its beautiful fingerboard is excellent as are its frets.... Headstock is striking with its A over A inlay in mother of pearl, tuners are original and still doing an excellent job, This guitar has the tone only the Exotic wood series guitars can produce unique rich and dynamic with excellent volume and clarity a fingerpickers delight. Just freshly received a JVG setup with a new Martin Bone & compensated sadle along with a fret dress and a new set of Martin 80/20 Phosphorius Bronze strings 12's x 54 for a substantial tonal upgrade from its old plastic. Overall rated 9.0 +++/10 well preserved it is over 40++ years old and has been lovingly played and well taken care of all these years is not new or mint of course it clearly is well above average used / vintage This comes with a good hard shell case ... and will protect it for the next 4-5 decades. Wonderful players guitar in excellent vintage condition when will I ever see another like this??? its here as of today ask if serious about owning this gem Thank you for your interest in our vintage guitar contact Joe to buy this guitar at: JVGuitars@gmail.com Pics soon to come.
However, it does give you a good flavour of the Martin and is a very playable plug-in, one of the best ways to see proper guitar emulation in action without paying for it. There are tab and effects options and a keyboard for playing it (we’ll assume if you can play a guitar, you’ll opt for the real thing, anyway). While it is free, we think you’ll be sorely tempted to upgrade, which will set you back $169.
Heat-treated Maple is used for the AZ's neck construction. Its use increases the wood's stability, durability, water resistance and tolerance of temperature changes. After extensive prototyping and trials, we concluded that 20.5mm thickness at the 1st fret to 22.5mm at the 12th fret is the optimal neck thickness for this process. The neck is sealed with an oil finish (sealer coat) which feels similar to a comfortable well-played guitar neck.
Marty is another player who’s built up his videos and YouTube Channels over a number of years and it’s become a vast resource for lessons at all levels. There’s a lot of stuff about how to play particular songs or how to mimic a certain musician’s style, but mixed up with these are plenty of absolute beginners’ lessons that teach the basics. There are some guest artists explaining different techniques, but mostly Marty’s The Man. The good thing about Marty is his great patience during the videos—he takes plenty of time to explain things and demonstrates them nice and slow, so you hardly ever have to stop and rewind the videos. Marty has a quirky sense of humour, too. It takes the hassle out of the harder lessons to master. He has a good website linked from his YouTube channel and a few cool, free giveaways. Check that out at www.guitarjamz.com
BC Rich is a fashionable brand of guitar that has been available since the year 1969. This is an American brand of acoustic & electric guitars & bass guitars. The brand produces 6-string electric guitars mahogany or basswood bodies. This brand is not as popular as other brands of electric guitars as it specializes in guitars for heavy metal & hard rock crowd. It is the choice of only those guitarists who are looking for an instrument that looks sound as edgy as possible. It offers trendy appearance and classic style of playing an electric guitar. The starting price of this brand of guitars is 29,000 INR approximately.
1. Blackstar ID:15 TVP ($229): This is one of the best combo amps on the market and with good reason: it comes with a variety of options to not only get you playing in no time. It also allows you to record very easily with a built-in USB option. You can select from six different power responses modeled after popular tube amp sounds (via Blackstar’s True Valve Power system) and even when turned down, the amp doesn’t lose its bite. The built-in multi-effects allow you to experiment with the world of effects and the Insider Software allows you to edit up to 128 user storable patches to further your sonic crafting.
Want to write blazing leads and screaming solos? Crank the pitch bend up, use one of four vibrato modes, and shred to your heart's content. Need some ultra-chunky rhythm chugs? S2 features both single-note and powerchord palm mutes with up to 5 layers and 8 variations each, offering superior realism and maximum options. While it excels at rock & metal playing (both lead and rhythm alike), it is also well-suited for many other genres thanks to its clean tone and huge range.
Kay was best known for its mid-priced guitars, (i.e., quality guitars priced below top-of-the-line instruments like Gibson and Gretsch models) as well as its budget instruments. Kay made guitar models for its own brand name and guitars branded as Silvertone for Sears, Sherwood and Airline for Montgomery Wards, Old Kraftsman for Spiegel, Custom Kraft for St. Louis Music,[2] Truetone for Western Auto,[3] 'Penncrest' for JC Penney, etc.[16] Also, Kay produced a line of archtop acoustics called Kamico.
I start at zero and work the bridge, stopbar, neck and pickups from there until I all feels and sounds right, takes some time but not too much. I only do this with new guitars and when I total strip one down maybe once a year. Living in the North East and having 4 season you have to adjust all the time, unless you live in a climate controled home and never go out. If you can do all these adjustments yourself and become one with your guitars I think your way ahead of the game.
Another popular value pack comes courtesy of one of the greatest rock'n'roll guitarists of all time. For those who have an appetite for destruction, look no further than the Slash AFD Les Paul Guitar Outfit. Endorsed by the Guns N' Roses shredder himself, this pack comes with the killer AFD Special-II guitar that's equipped with new Ceramic Plus humbucking pickups, and a built-in Shadow pickup ring E-tuner. Additionally, this pack also contains a custom gig bag with the Slash "Snakepit" logo, Slash signature Dunlop Tortex picks, and much more.
1979 Alvarez 5053 - D-45 Martin Style Replica Japan Crafted Exotic Brazilian Jacaranda Rosewood Here we have a really great one from our 30 years of Alvarez collecting and she is absolutely one of the finest Alvarez model Martin Copies crafted in Japan from this golden era the late 1970's.. This example is a 1979 #5053.. its ALL ORIGINAL with the only exceptions being we changed the old cheap tone defeating plastic nut & saddle for the preferable upgrade to a Martin bone nut & compensated saddle set and of course the Martin Marquis 80/20 Phosphorus bronze strings 12’s strings along with the Martin Bridge pins as seen. This is a unique & exotic true Vintage Japanese version of the classic ornate Martin D-45 again this one was Crafted in Japan by one of the finest acoustic instrument builders from this time period Alvarez, This guitar is possibly even a bit more fancy than even the actual Martin D-45 with the intricate exotic woods used see this examples exotic Beautiful 3-piece back simply gorgeous! The Martin D-45 version just has a 2-piece back in most cases...This example is a RARE Alvarez with such woods and its workmanship level is very ghigh suggesting a master luthiers hand its model #5053, with the date stamped inside on the label reads ( 1979 ).,,see pic detail. Bound body(front w/b/w/b/w/b/w, back w/b/w/b),bound neck(white),bound peg head(w/b/w). See the Beautiful detailed Abalone inlay around the sound hole with its white mother of pearl fret markers. With an adjustable Ebony bridge with a bone saddle and the sweet smelling Brazilian Jacaranda Rosewood fretboard its simply stunning. Special truss rod cover that has the word Alvarez in gold lettering and SLM (Saint Louis Music)in gold also. Medallion on the back of the headstock says imported and customized Saint Louis Music since 1922. Choice Sitka AAA Spruce top, with old highly exotic looking Jacaranda Brazilian Rosewood - awesome landscape figure sides are very figured exotic looking Jacaranda. Smells great. Wonderful exotic figuring. for the back and sides Better looking we haven’y seen...The Perfling between the woods on the back is just absolutely stunningly gorgeous,unbelievable craftsmanship!!. I've only seen one other like it. Real difficult to find much info on these rare exotics. A truly Beautiful vintage Japanese acoustic guitar and quite the collectible instrument ...for the person wanting only the best at a fair price...not on sale for $6,000-8000 like the Martin this one is a true bargain Vintage exotic WoW! What a great find. JVG Rated at a solid 8.8/10 very good original Vintage condition. I suggest you get his before she's gone..don't know when I'll find another like it. .

Equalizer or EQ pedals have traditionally been used to boost audio signals for solos. If you want to boost the middle frequencies, the EQ will do the trick and provide a tight tone. Some musicians don’t find boosters and EQ pedals to be necessary in a chain, so make sure you do some research to figure out if this type will really benefit your sound

We certainly can’t have a best cheap electric guitars list without the awesome Epiphone G-400 Electric Guitar, Worn Cherry. In fact, this guitar will make most peoples’ “best guitars” lists thanks to the fact they’re built to such high standards and they sound absolutely fantastic. The budget friendly price tag makes it an affordable option for beginner guitarists, but you’ll often see these Epiphone SG models on the professional stages of the world thanks to the sheer playability and build quality.
{"id": "H91419", "skuOrProductId": "H91419000001000", "categoryId":"site1AAH", "name":"Artstar AS153 Semi-Hollow Electric Guitar", "pageUrl":"/guitars/ibanez-artstar-as153-semi-hollow-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Artstar-AS153-Semi-Hollow-Electric-Guitar-Antique-Yellow-Sunburst/H91419000001000-00-120x120.jpg", "addToCartUrl":"/guitars/ibanez-artstar-as153-semi-hollow-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place between "jazz-clean" all the way to "blues dirty." If you're aiming high, Ibanez has an ARTSTAR for you.", "value":"799.99", "priceMin":"799.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"27", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"22", "usedOrNew":"used", "discontinued":"0", "onOrder":"1", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1HBA,site1LFMIC,site1LAAA", "stickerText": "Top Rated", "checksum":"637145126000", "priceVisibility": "1"}
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(914) 963-2949, visibilitySalePrice=2099.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, displaySku=113478791, invMsgBackOrdered=false, skuPriceVisibility=1, stickerUrlLink=null, kitCarouselSkuIds=null, stickerURL=null, availableDate=Thu Oct 25 07:46:49 PDT 2018, invMsgAvailability=, serialized=false, listPrice=2299.99, isShipsInternational=false, name=Cherry Sunburst, storeCity=Yonkers, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Yonkers at Ridge Hill, newPrice=2099.99, condition=null, priceDropPrice=200.00, status=instock, stickerClass=stickerEmphasis, stickerText=Price Drop, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Fair, prop65=null, salePrice=2099.99, warranty=false, wasPrice=2299.99, storeId=861, displayId=113478791, stickerDesc=Price Drop, isOnSale=false} 2,099.99 USD
Aside from tuning issues, new bass strings, especially roundwounds, can be very bright, and this may result in a lot of finger noise and fret buzz. If they’re changed a day or two before the session, and the bass is played a bit to break them in, there may be less likelihood of problematic noise. In fact, while many players think of them as old-school, flatwounds can sometimes be the best choice, when a fat deep bass sound is called for—it’s worth a thought.
This is sort of a corollary to the DI+Amp suggestion. While effects on bass aren’t as common as with guitar parts, some bassists will come in with these big rigs of effect boxes, and want to record “their sound”, which often is clearly overprocessed for the song. Rather than argue the point, let the player hear the sound he’s used to during tracking, but be sure to also grab a nice clean signal, prior to all the effects, usually straight off the bass via a DI. That way, if your concerns prove all too true come mixdown, you can turn to the dry track, and recreate those favored effects to a more appropriate degree, with studio tools. Even if the effected bass sounds good to you, many pedals and MI effect boxes are noisy, and you might have to recreate the sound anyway, to avoid problematic buzz or hiss from the player’s cool-but-dirty toys.
The headstock does not come pre-carved, which is good for those who want to personalize its shape, and bad for those who can't do wood work. All needed parts are included, along with hex wrenches for the truss rod and saddle adjustment, it even comes with some solder, so you'll just need a soldering iron and a Philips head screwdriver to complete the assembly.
CostHelper Electric Guitar Guide - [New Window] - Find out how much an electric guitar should cost. Get price guidelines and shopping tips for an electric guitar. A basic electric guitar with amplifier and cord starts around $200 to $400 for a beginner's outfit; a better quality kit can run $500 to $2,000, and high-end electric guitars are $2,000 to $5,000 or more for the instrument alone.
Splitting the humbucker #1: by grounding the coil-tap and connecting the hot lead to output we’re rendering the coil closer to ground useless because both of it’s leads are grounded. What we’re left with is the coil closer to the hot lead. Since we only have one coil, it will not be hum-cancelling on it’s own. It’s common to split a humbucker, so it can be wired with another coil in parallel, making the noiseless combination, especially on H-S-H guitars.
There is not one standard # of frets, but the three most common are 21, 22 and 24 frets. The extra frets simply mean you can play some additional high notes. If you are just starting out, you will probably be just fine choosing 21, 22 or 24 frets. But, you should probably avoid the fretless option unless you're specifically learning how to play fretless instruments.
Variable caps used for radio tuning have about 1000 times smaller capacitance than needed for guitar tone controls. The advantage of a variable cap, could one be made in the right range for guitar, or those many-caps-on-a-rotary-switch, is that the resonant peak is maintained regardless of setting. With Joe’s “cap fader”, that peak gets flattened out in the middle of the pot rotation. Doesn’t mean it’s a bad sound, but certainly different.
Again, as with the bridge saddle, too low of a bridge will decrease the "drive" of the strings. Thus the sound and tone will suffer. Also a low bridge is structurally not a good idea, as the bridge can more easily crack (and damage the top of the guitar). Most original Martin guitar bridges are about 3/8" tall (from bottom to the highest part of the bridge).
To set up guitar pedals, use a short patch cable to connect your guitar directly into the tuner pedal if you’re using one. If you’re using filter effects pedals, like auto-wahs and envelope filters, connect them next. Plug in your compressor pedal after the filter pedals, followed by pitch-shifting, overdrive, and distortion pedals. Set up your modulation pedals, like chorus, flanger, tremolo, or phaser pedals, near the end of the chain so they’ll have a richer sound.

He assumed the stage name Muddy Waters and released a series of historic recordings on the legendary Chess Records label. These discs established the quintessential Muddy Waters persona—the jive-talkin’, sharp-dressed, tough-as-nails, mojo-workin’ Hoochie Coochie Man. Waters’ confident, cocky vocal delivery was augmented by the knife-edge drama of his bottleneck guitar leads. This steely, highly electrified sound galvanized a new rising generation of British rock musicians when Muddy first visited those shores in 1958.
Without some kind of amplification, it would of course be possible to “hear” what you’re doing. That is something very different from never hearing what a particular electric guitar sounds like when amplified. In that case get an electric with a soundboard such as an archtop or ask yourself “why would I not amplify a device meant to be amplified through the guitar pickups?”

That said, information regarding Asian-guitar production from the 1970s and early 1980s is cloudy at best. Most lower-end Lotus-branded guitars were produced by either Samick or other factories in Korea or Indonesia. However, some of the higher-end Lotus instruments were built by the Cort factory in Korea or by one of three factories in Japan: Yamaki, Matsumoku, and Moridaira.
Description: 1997 Non Left Handed Model. Body: Laminated Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - String Instrument Finish: Ebony, Natural, Vintage Sunburst
I have been playing guitar, banjo, bass and harmonica for 46 years - and I don't find a $4,300 Martin D 41 to be affordable (Guitar Center price). I play a Taylor 402ce and a dozen other instruments. I believe Taylor is the best instrument for the price..Alvarez Yairi guitars are very good too. Martin and Gibson make fine guitars but they are overpriced. I have a Chinese Maple Guild that sounds fine but the fretwork is amateurish. A Chinese Takamine New Yorker is very well constructed and sounds great.
the guitar was made for gretsch by Tokai Gakki in the very early 70's.they sound sweet play great, i have one also .at age 40 it needs very little more then a frett job to fix it back to like new. mine is a model 5989. is 6028. I don't hink it is worth much. It''s just an old japaneses import. It is a well made guitar and I enjoy playing it since my other guitar got stolen....
{ "thumbImageID": "Mockingbird-Set-Neck-Electric-Guitar-Amber-Burst/J47208000001000", "defaultDisplayName": "B.C. Rich Mockingbird Set Neck Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Amber Burst", "sku": "sku:site51500000031711", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "714.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Mockingbird-Set-Neck-Electric-Guitar-Amber-Burst-1500000031711.gc", "skuImageId": "Mockingbird-Set-Neck-Electric-Guitar-Amber-Burst/J47208000001000", "brandName": "B.C. Rich", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Mockingbird-Set-Neck-Electric-Guitar-Amber-Burst/J47208000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Gloss Natural", "sku": "sku:site51500000031710", "price": "497.54", "regularPrice": "497.54", "msrpPrice": "714.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Mockingbird-Set-Neck-Electric-Guitar-Gloss-Natural-1500000031710.gc", "skuImageId": "Mockingbird-Set-Neck-Electric-Guitar-Gloss-Natural/J47208000002000", "brandName": "B.C. Rich", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Mockingbird-Set-Neck-Electric-Guitar-Gloss-Natural/J47208000002000-00-60x60.jpg", "imgAlt": "" } ] }
Guitar has a vicious tone, nice wood, great p[ickups. However the guitar I received has a problem with the volume control acting as a tone knob and also cuts out sometimes. The guitar chord had to be replaced because it was cheap and cut out like a bad phone chord. I have to take it in to a local guitar shop and have the volume control fixed. Not too expensive but some additional cost. I didn't want to send it back as I otherwise love the guitar and didn't want them to send me a different one rather than just repairing it. Plus I don't want to wait that long. But certainly a great guitar for the money. No question.
Excessive distortion homogenizes guitar tone. You want enough gain to get great sustain and an aggressive sound if desired, but you don’t want to lose the punch, dynamics, and immediacy of a semi-dirty tone. Malcolm Young is my benchmark—a perfect sonic barometer to go by when talking about incredible rock-guitar tone. His playing proves you don’t need a ton of distortion to rock with total authority.
A Japanese company which is renowned for its amazing guitars, Ibanez is a great brand for beginners. Since the Ibanez RG450DX RG Series Starter Electric Guitar has a maple neck, mahogany body, and a rosewood fretboard. Together, these give this guitar a great sound. The Ibanez RG450DX RG Series Starter Electric Guitar is a pretty fine looking guitar with amazing sound to boot.
Anyways, it sucks to not have a camera to show stuff or even a way to measure stuff I'm describing. I'll have to obtain a few small things to set it up. like a saddle and an allen wrench that doesn't suck. Probably whatever caliper or shim they use to do real setups as well. Maybe latter frames just have tilted bridges after a while. I don't really know. The bridge is rather thick. If you lower the bridge, do you just sand it?
Why Martin electric guitars have never been more popular isn’t too hard to figure out. Martin, whose expertise has always been in top-notch acoustics, never really put a lot of effort into marketing its electrics. They were always well made, and, especially in the necks, clearly “Martins.” In the final analysis, however, it probably comes down to being victims of the success of their acoustic brothers, and players have just never seemed to warm up to the idea of Martin “electric” guitars. For the savvy collector with a taste for quality and relative rarity, Martin electrics remain excellent and attainable prizes.
The Kaman Corporation soon diversified, branching off into nuclear weapons testing, commercial helicopter flight, the development and testing of chemicals, and helicopter bearings production. But in the early 1960s, financial problems due to the failure of their commercial flight division forced them to consider expanding into new markets, such as entertainment and leisure. Charles Kaman, still an avid guitar player, became interested in the making of guitars.[2][6]
The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.
In addition to acoustic and electric guitars, the company now also makes mandolins and ukuleles. Their mandolins are highly regarded, they “more or less rule in the bluegrass market” in the United States.[5] As of May 2012 the company has about 85 employees and manufactures six to seven acoustic guitars, three electric guitars, two mandolins, and two ukuleles per day.[4]
A batch of 20 to 30 guitars featuring Ripley’s electronics was assembled using Japanese bodies and necks. The one in our possession is a GS2-R (#28949) with a standard (no German carve) Strat-style body, bolt-on multilaminate neck made up of red-dyed 1/16″ maple strips glued end-to-end, pointy-droopy carved bi-level six-in-line headstock, Gotoh tuners, black hardware, 24-fret ebanol fingerboard, faux-pearl pennant inlays and locking Ovation Floyd-Rose-licensed vibrato system. Two plastic-covered humbucking pickups (no exposed poles) featured individual output controls for each string, with six individual three-way mini-toggles for selecting pickups combined with six fader pots directing string/pickup output to a stereo jack.
The simplicity and ergonomic design of the Pacifica PA012 body mirrors that of the PAC112. It is also available in exciting colors to match it perfectly to the player preference. Tonewood for PA012 as specified on the Yamaha catalog can either be in alder, nato or agathis, while the PAC112 is only made in alder wood. Neck for both guitars are made in maple with a satin finish then it is overlaid by a 22 medium frets rosewood fingerboard marked by inlay dots.
On May 1, 2018, the company filed for Chapter 11 bankruptcy protection. As part of its debt restructuring, the company will close down and liquidate its unprofitable Gibson Innovations division, which sells audio equipment outside of the U.S. and has been the source of much of the company's financial troubles. The restructuring will allow Gibson to focus on its most profitable ventures, such as musical instruments. No changes will be made to its guitar manufacturing business, and all Gibson and Epiphone branded guitars are expected to continue in production uninterrupted. Additionally, $135 million was provided by existing creditors to provide liquidity to maintain existing operations.[57][58]
If you like to run all your effects into an amp set clean and get your gain sounds from pedals, you probably don’t ever need to consider using amplifier effects loops or a wet/dry/wet rig. If your amp(s) are set relatively clean, you will be able to use any of the effects listed above straight into the front of the amp—and they should sound really good.
I'm sorry to disagree Merlin, but the woods used really do make a big difference to the sound of a solid body guitar. Both the neck and body are resonators, the string energy drives the woods which damp some frequencies and use that energy to emphasise the resonant frequencies. That drives the string's vibration through the bridge/nut/fretboard. It's a feedback loop.
This Duo-Jet has the typical brown back and neck finish, original tuners, bone nut (which has never been off), ebony fingerboard and original frets, lefty thumbprint inlays, original Pat. Applied For Filter’Tron pickups with original wire harness including switches and capacitors. All solder joints are original. Original bar bridge. The lefty Bigsby tailpiece does not appear to be original to the instrument, and is probably a late 60s Bigsby, as there are screw-holes from another tail-piece on the bottom. The second to most recent owner acquired the guitar with its current tailpiece in 1971, and the only change he made to the Bigsby was in removing the black paint. The guitar was recently sent to Curt Wilson at Old School Guitar Repair(www.oldschoolguitar.net) at the recommendation of Gretsch guru, Edward Ball, where the front of the headstock was refinished to the correct black(previously Orange) and the center portion of the Bigsby was repainted black. Sadly, the previous owner removed and discarded the original lefty pickguard many years ago.
The Omen-6 is a stripped down take on the Hellraiser, with the same sleek double cutaway design and HH (dual humbucker) configuration, but at a more affordable price point. But what's good about it is how Schecter is able to maintain the premium look and attention to detail at this lower price point, including the carved top design. While the name again implies something evil, this guitar is quite good for the price.
The first guitar amplifiers were relatively low-fidelity, and would often produce distortion when their volume (gain) was increased beyond their design limit or if they sustained minor damage.[3] Around 1945, Western-swing guitarist Junior Barnard began experimenting with a rudimentary humbucker pick-up and a small amplifier to obtain his signature "low-down and dirty" bluesy sound. Many electric blues guitarists, including Chicago bluesmen such as Elmore James and Buddy Guy, experimented in order to get a guitar sound that paralleled the rawness of blues singers such as Muddy Waters and Howlin' Wolf,[4] replacing often their originals with the powerful Valco "Chicagoan" pick-ups, originally created for lap-steel, to obtain a louder and fatter tone. In early rock music, Goree Carter's "Rock Awhile" (1949) featured an over-driven electric guitar style similar to that of Chuck Berry several years later,[5] as well as Joe Hill Louis' "Boogie in the Park" (1950).[6][7]
There were few things more powerful than Stevie Ray Vaughan with a guitar in his hands. Though he was deeply entrenched in the blues idiom, he took it to an entirely new and original level. Heavily influenced by Jimi Hendrix, his triple string bends and lightning fast double stops were things of absolute beauty. While every one of his songs is an electric blues guitar masterclass, perhaps his most impressive performance is in the song “Texas Flood.”
Wes Borland (b. 1975) guitarist for Limp Bizkit has owned many Ibanez guitars, including a custom 4-string baritone guitar, although he no longer endorses them. He was mainly noted for playing an Ibanez RG7 CST which had selectable piezo and magnetic pickups, only 18 of these were made in 1999. Borland has a signature Yamaha guitar, but has been seen playing a Jackson with the reformed Limp Bizkit.

From 1986-1989, “Made in China” Squier Stratocasters carry the “Affinity” decal on the smaller ball of the headstock and have serial numbers as NCXXXX with the first number the year of manufacture, e.g. NC6XXX (Made in China 1986). NCXXXX is also used for Squier Strat Bullets of the same vintage. The Affinities are practically the same as the Japanese-made Squier Bullets of the mid-’80s; the same alder bodies, same rosewood-type fretboard and maple necks. Tuners and electronics are also very similar – not the best but distinctive in sound. Common modifications are more stable tuners, larger potentiometers, better capacitors, and pickups. They had single-ply 8-hole pick guards like the ’50s Fender Strats giving them a classic look. Colors were typically black, white and red.
Echo controls usually let you determine the level, the period between playbacks, and the decay—the rate at which succeeding notes become quieter and quieter until they fade out altogether. The period (or time) parameter is often controlled by a single button you push repeatedly in time with the music. This is called tap delay and keeps your echo effect from clashing with the music's time signature.
Replacing pickup rings and restoring covers. These rings are usually plastic and cannot be restored but covers are normally metal on Les Paul styles. You may not want to rub steel wool across your covers so follow the method of cleaning painted bridges to avoid unwanted scratches. Also, replace your pickup rings properly with rings that are the same length and/or color and make sure the screw holes do not need to be resized.
“Spectrum ‘5’ has an unusually thin neck. To achieve the proper rigidity in this fast action neck Teisco had to select the hardest (and the costliest) material available…Ebony. The adjustable neck is fashioned out of 5 plys [sic] of laminated Ebony to insure maximum strength. The fingerboard of the Spectrum ‘5’ is likewise fashioned out of Ebony. Note the unique position markers and the extra wide, easy to finger frets.
The Tune-o-matic bridge was the brainchild of legendary Gibson president Ted McCarty in 1954, setting the standard for simplicity and functionality that has never been bettered. The 2008 Les Paul Standard features TonePros locking Nashville Tune-o-matic in a chrome finish, which has saddle adjustment screws on the pickup side, and pre-notched saddles for quick installation. The chrome locking stopbar tailpiece is also from TonePros. These parts come with locking studs designed to secure both components firmly to the body so that there is no lean, yielding a great union between the strings and body which results in excellent tone and sustain.
The actual key that this song was written in is Bb (B flat) and can be a bit difficult for beginners; I prefer using a capo for this song and playing it in the Key of C. Using the capo to play this song doesn’t change how the song sounds, but it makes playing the song a lot easier. Using your capo on the third fret, you chord progression will look like C – G – Am (A minor) – F.

Some of the earliest electric guitars adapted hollow bodied acoustic instruments and used tungsten pickups. This type of guitar was manufactured beginning in 1931 by Electro String Instrument Corporation under the direction of Adolph Rickenbacher and George Beauchamp. Their first design was built by Harry Watson, a craftsman who worked for Electro String. This new guitar which the company called "Rickenbackers" was the first of its kind.

!function(e){function n(t){if(r[t])return r[t].exports;var i=r[t]={i:t,l:!1,exports:{}};return e[t].call(i.exports,i,i.exports,n),i.l=!0,i.exports}var t=window.webpackJsonp;window.webpackJsonp=function(n,r,o){for(var s,a,l=0,u=[];l1)for(var t=1;tf)return!1;if(h>c)return!1;var e=window.require.hasModule("shared/browser")&&window.require("shared/browser");return!e||!e.opera}function a(){var e=o(d);d=[],0!==e.length&&u("/ajax/log_errors_3RD_PARTY_POST",{errors:JSON.stringify(e)})}var l=t("./third_party/tracekit.js"),u=t("./shared/basicrpc.js").rpc;l.remoteFetching=!1,l.collectWindowErrors=!0,l.report.subscribe(r);var c=10,f=window.Q&&window.Q.errorSamplingRate||1,d=[],h=0,p=i(a,1e3),m=window.console&&!(window.NODE_JS&&window.UNIT_TEST);n.report=function(e){try{m&&console.error(e.stack||e),l.report(e)}catch(e){}};var w=function(e,n,t){r({name:n,message:t,source:e,stack:l.computeStackTrace.ofCaller().stack||[]}),m&&console.error(t)};n.logJsError=w.bind(null,"js"),n.logMobileJsError=w.bind(null,"mobile_js")},"./shared/globals.js":function(e,n,t){var r=t("./shared/links.js");(window.Q=window.Q||{}).openUrl=function(e,n){var t=e.href;return r.linkClicked(t,n),window.open(t).opener=null,!1}},"./shared/links.js":function(e,n){var t=[];n.onLinkClick=function(e){t.push(e)},n.linkClicked=function(e,n){for(var r=0;r>>0;if("function"!=typeof e)throw new TypeError;for(arguments.length>1&&(t=n),r=0;r>>0,r=arguments.length>=2?arguments[1]:void 0,i=0;i>>0;if(0===i)return-1;var o=+n||0;if(Math.abs(o)===Infinity&&(o=0),o>=i)return-1;for(t=Math.max(o>=0?o:i-Math.abs(o),0);t>>0;if("function"!=typeof e)throw new TypeError(e+" is not a function");for(arguments.length>1&&(t=n),r=0;r>>0;if("function"!=typeof e)throw new TypeError(e+" is not a function");for(arguments.length>1&&(t=n),r=new Array(s),i=0;i>>0;if("function"!=typeof e)throw new TypeError;for(var r=[],i=arguments.length>=2?arguments[1]:void 0,o=0;o>>0,i=0;if(2==arguments.length)n=arguments[1];else{for(;i=r)throw new TypeError("Reduce of empty array with no initial value");n=t[i++]}for(;i>>0;if(0===i)return-1;for(n=i-1,arguments.length>1&&(n=Number(arguments[1]),n!=n?n=0:0!==n&&n!=1/0&&n!=-1/0&&(n=(n>0||-1)*Math.floor(Math.abs(n)))),t=n>=0?Math.min(n,i-1):i-Math.abs(n);t>=0;t--)if(t in r&&r[t]===e)return t;return-1};t(Array.prototype,"lastIndexOf",c)}if(!Array.prototype.includes){var f=function(e){"use strict";if(null==this)throw new TypeError("Array.prototype.includes called on null or undefined");var n=Object(this),t=parseInt(n.length,10)||0;if(0===t)return!1;var r,i=parseInt(arguments[1],10)||0;i>=0?r=i:(r=t+i)<0&&(r=0);for(var o;r
Hi Jeff. I just wanted to point a couple of things that IMHO are not 100% accurate. Most probably its just to make things not too complicated, but I think is important to notice them. First, resistance is not frecuency dependant, and therefore it doesn´t have any effect on high frecuency content. However, Impedance does, and impedance is the resistance on the AC world (and a guitar signal is an AC signal). Therefore, the reason both long cables and pickups loose high frecuencies as they get longer is because the capacitance in them increases, and capacitors have a certain impedance (once again, resistance in the AC world). So you may actually be true, but its because of impedance created by the capacitance and inductance present on the pickup. Will continue..
Although it is well known for its guitars, Gibson's largest business is in fact electronics.[citation needed] Gibson offers consumer audio equipment devices through its subsidiaries Gibson Innovations (Philips brand), Onkyo Corporation (Onkyo and Pioneer brands), TEAC Corporation (Teac and Esoteric brands), Cerwin Vega and Stanton,[6] as well as professional audio equipment from KRK Systems and TEAC Corporation/TASCAM.

Replace components. From plugging in and unplugging my guitar so much, the stock input jack lost its grab. So I had an extra Radioshack one lying around, and I soldered it in. Now all my cords are held tight. I also had a problem(common with Teles as I understand it) with my input jack "cup" coming out with wires and all. Once you take a look at how it's held in there, it's an easy fix.
The golden question is: What is the difference between acoustic and electric guitars. The primary difference between the two types of guitars is that acoustic guitars produces sound entirely through vibration. Its sound is emitted through the vibration of the string when it’s plucked back and forth. Electric guitars, on the other hand, are powered through electricity and electromagnetism generated through its components are what drives the sounds that come out of it.

Teisco's very FIRST solid body electric guitar, the 1954 Teisco, Model J-1. 1 single coil Pickup. Front plate says, "NIHON ONPA KOGYO CO. LTD TEISCO". Back plate says, "TEISCO ELECTRIC GUITER MODEL J1". Yes, Guitar is misspelled as "GUITER"!. Maple neck is a "ball bat" with very pronounce "V". Guitar is currently set up for slide with "flat-wounds". VERY ROUGH CONDITION and lots of "character". Where to start, hm....? Firstly it has termite, yes, termite damage to the back. Don't ask me how, I don't know. The top is veneered with a beautiful quilted maple, but is missing a big section on the front. The tailpiece is missing it's cover. The wood bridge is partially inverted and sagging, due to string tension. The pick guard is warped (normal to many vintage guitars). We're pretty sure the brown bakelite knobs, while cool, are not original. Some of the frets have been changed, mostly by removing from the last 6 slots and relocated. 95% of the veneer is missing from the back. The tuners are mostly original with a couple of replacement gears. A couple of the tuner button shafts are bent, but tuners still function. The great thing is the way it is currently set up, it makes a heck of a "slide guitar". The original pickup sounds incredible through both our shop Trace Elliot and Marshall JCM-800!!! No case included.

I didn’t use any guitar effects. I just used a straight into the amp, and I put the amp up pretty hot, though. The tweeds go up to 12 usually, and this one I had on 10 on the bridge pickup on the Strat. I was using a glass slide. Here’s the slide I was using. It’s like an old medicine bottle. I put some felt in there to make it a little bit of a tighter grip on my finger, but it’s the same slide that Dwayne Allman used.
Anyone who has a Tempest XII probably needs a pick guard. I have a 1966 which was in the case for much of the past forty years. The plastic apparently dried out and "shrunk," causing the two corners to pop off at the screws near the neck. Some guitar repair technicians are good at fabricating pick guards, but most are either woodcrafters or electronics geeks. Please advise how your search has gone. Maybe I'll replace mine, too. RED

Launch price: $2,799 / £2,399 | Body: Laminated maple | Neck: Maple | Scale: 24.6" | Fingerboard: Ebony | Frets: 22 | Pickups: 2x Full'Tron humbuckers | Controls: Bridge volume, neck volume, master volume, tone, 3-way selector switch | Hardware: Anchored Adjusto-Matic bridge, Gotoh locking tuners, Graph Tech TUSQ XL nut | Left-handed: | Finish: Cadillac Green

Official Vintage Guitar Price Guide: This print guide, published by Vintage Guitar and Bass, is an annual guide that is re-published with updated information each year. The webpage above is handy because it shows links for all guides that have been published in one place and will continue adding links for future years. The link shown for each guide will take you to a store online where you can purchase the guide. It is known for being extremely thorough, and its latest edition, the 2017 guide, has appraisals for 2,000 brands of guitars, basses, amps, effects, mandolins, steels, lap steels, ukuleles and banjos.
Since this guitar is from Taylor it benefits from the company's quality consistency, which applies to all their instruments regardless of price points. While aesthetics and materials are more affordable, it gets the same level of attention to detail and quality as the more premium models. This gives budget limited players the chance to have a true Taylor acoustic that plays like a "dream", and not a watered down version that plays and feels different.
Make sure that only the notes you deliberately play actually sound. Guitar strings aren't isolated systems like the tone generators of a synthesizer; if you simply leave them open they may ring even though you've never actually played them. Always watch out carefully for such “rogue sympathetic vibrations” and make sure you properly stop strings that sound in unintended ways.
In the second diagram, the two pickups are wired in series. The theory behind series wiring is that the ground wire of one pickup is connected to the hot wire of the other pickup. As a result, they become a kind of compound pickup, with one ground and one hot for both. When wired in series, the pickups combine their impedance (resistance) and the output is very high. If your Strat’s middle pickup is a reverse-wound/ reverse-polarity type (aka RWRP), you’ll get the same humbucking effect as you do when the pickups are wired in parallel—no changes there.
As the author of the article, I don’t use an Axe-Fx, but a $250 Fly Rig. But if I want to talk to an expert on modeling, I wanted to ask the company that knows it best. Sure, you have to take in to consideration a PA, but you have to do that if you own an amp too, since proper sound sends keeps the volume lower on stage to send everything through the PA.
In the 1980s it seemed like Washburn guitars were everywhere, and they were leaders in the hard rock and metal guitar genre. Even though they aren’t quite as prominent as they once were, they still feature some nice guitars in their lineup. From metal to jazz and anywhere in between, Washburn has you covered. With signature models for Paul Stanley and Nuno Bettencourt, they still have strong name recognition in the rock world.
The brand boasts of a remarkable following. The famous Fender Stratocaster is deservedly regarded as the guitarist’s electric; it has a long lineup of musicians who used and still use it for studio recordings or live performances. A few names: Jimi Hendrix, Eric Clapton, George Harrison of the Beatles, The Edge of U2, and Jeff Beck of the Yardbirds. The enduring popularity of this model is largely due to its incredible versatility; it bridges styles and genres with ease.
This cheap acoustic guitar is highly recommended for beginners on a budget. It continues to stand among the best selling acoustics, and many a young musician has had this as their first ever guitar. It features a familiar combination of spruce top, mahogany body and neck, and rosewood fretboard. The guitar's classic configuration and traditional dreadnought shape works well with almost any type of music, from folk to rock and everything else in between.
I’ve been looking for a long time for information on what goes on inside a typical Strat-style 5-way switch, and this site helps me understand these switches a bit more. But I still have questions, though: 1)Why is it necessary to use jumpers from one lug to another? 2)As I understand it, a 5-way switch is 2 separate 4-lug switches wired together, each with 3 input lugs and presumably 1 output lug, OR are these lugs INPUT as well as OUTPUT lugs? (I get the impression that they are dedicated to either input or output, but looking at some wiring diagrams, it appears that inputs from pickups can come from either side of the switch.) 3) Is one side the INPUT side and the other the OUTPUT side, or are both sides of the switch mirror images of one another? In other words, must the signal from the pickup enter the switch at one side, and exit the switch at the other side? It seems I can only really understand how these switches work in terms of inputs (from the pickups) and outputs (to the output jack or volume pot). Without knowing whether a certain lug is acting as an input or an output, it can be hard to understand which way the signal is travelling.
The Vintage El Dorado Leather Guitar Strap is meticulously hand-tooled in traditional Western motifs by leather artisans with decades of experience. Each strap is an individual and unique work of craftsmanship that you'll be proud to display on your guitar. The designs date back to late 19th century Western leatherwork, used extensively in the decoration of saddles, saddlebags, belts and holsters.
Me got a Dorado resonator guitar, very nice dark walnut finish with white binding on edges. I bought it in 1985 but assume the guitar is mid-70's. Incidentally the neck has a very "japanese" feel to it. I was told by a guitar dealer that these particular instruments may have been ( at least partially) manufactured in Japan, then possibly had their resonators fitted in USA. They were DISTRIBUTED by Gretsch, in Europe at any rate. Mine is a nice guitar but not nearly as loud as most resonators.

Fortunately, some of the best happy accidents have been preserved for posterity. For over 40 years Seymour W. Duncan has kept meticulous notes on the best pickups to cross his workbench. Many of these have been resurrected as Seymour Duncan models. For example, our ’59 Model is based on a particularly sweet-sounding ’59 P.A.F. in one of Jeff Beck’s guitars. Another of our models, the Pearly Gates, is inspired by another, rawer-sounding ’59 P.A.F. That’s just one example of two supposedly identical pickups from the same year displaying different musical personalities.
While often overlooked, the speakers are an amp’s most crucial component—they’re the last thing standing between all that electronic gobbledygook and the sound that reaches your ears (except for yo’ mama’s fist, but that’s another story). Different sized speakers have different tonal characteristics, and you should consider speaker sizes the same way you’d consider an amp’s wattage rating. Speakers are like booty—small ones are tighter and big ones have more bottom end. But like a pair of pants, cabinet design can shape bottom end as well. Which is why a closed-back 4x10 cabinet may put out more bass than a 15-inch speaker in an open-back cabinet.
Bass chorus effects use a cycling, variable delay time that is short so that individual repetitions are not heard. The result is a thick, "swirling" sound that suggests multiple instruments playing in unison (chorus) that are slightly out of tune. Bass chorus effects were more common in the late 1980s, when manufacturers such as Peavey included chorus effects in its bass amplifiers. In the 1990s and 2000s, more sophisticated bass chorus effects devices were created which only apply the swirling chorus effect to the higher parts of the bass tone, leaving the instrument's low fundamental untouched.[5]
Guild is an American guitar company that makes some amazing semi-hollow electric guitars such as the Starfire and the Aristocrat. These are guitars that nail the retro-rock sound and have the looks to match. Many classic Guild models have been revived through the Newark Street collection. While these guitars are cool beyond words, where Guild really shines is in the acoustic arena.
Interesting idea Mike. I suppose you could run some kind of DC bias through the selector switch together with the pickup signals and you’d have to introduce appropriate DC blocking capacitors to contain the DC bias within the guitar… probably possible but a lot of work to get it right. Alternatively you could just look for one of the “super switch” types with more than 2 poles so you can do the LED control on a completely different circuit but driven by the same switch e.g. https://www.premierguitar.com/articles/Introducing_Fenders_5_Way_Super_Switch

From guitar faces to the different kinds of axes, here is the Top 10 Greatest Guitar Players. Squeezing the talent that’s blessed our ears for all these years into a list of 10 is just as difficult as choosing which limbs to lose or keep. The list is by no means definitive, but it’s an accurate representation for the uniqueness of the music the guitarist has made. In short, these famous guitar players have played the melodies that have made grown men cry, and probably gave you a taste of how your guitar face would look like pretending to play that solo. Of course many great guitarists may not have made this top 10 list, but feel free to add your own favorites in the comments.

Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!

The Hummingbird Pro is a distinctive square shoulder dreadnought acoustic electric. This lack of cutaway does have some playability disadvantage, but what it does mean is that the tonal quality is absolutely amazing throughout the entire range. Whatever sound you want to get out of the Hummingbird, you can, and the excellent L.R. Baggs Element pickup does a great job of translating that to an electrical signal.

We began the process by creating a 'short-list' of brands that have amps selling in the sub $1000 price range with amps that have strong enough ratings to be short-listed for any of our other electric guitar amp guides. This gave us the following 22 brands to consider: Blackstar, Boss, Bugera, California Tone Research, DV Mark, Egnater, EVH, Fender, Hughes & Kettner, Ibanez, Laney, Line 6, Marshall, Orange, Peavey, PRS, Randall, Roland, VHT, Vox, Yamaha and ZT.
Jackson is a renowned guitar manufacturing company. It is named after its founder, Grover Jackson. Jackson Guitars was founded in the year 1980 and has its headquarters in the State of Arizona, United States. Jackson guitars are considered as one of the best guitars in the world. Jackson Guitars are known for its slender and elegant designs. Jackson Guitars are popular for their typical pointed headstock which is similar in design with the “shark fins”. This design is most popular and has inspired many other guitar brands to shape themselves as the Jackson’s.
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Mahogany - Back: Solid Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Dovetail - Neck Construction: V-Shape - Fingerboard: Maple - Binding: Ivoroid - Frets: 20 - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Maple - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Open Pore Natural
This is a very cool goldtop Vox SDC 33. Ultra slim body and neck makes playing extremely smooth and comfortable. Coaxe pickups provide a unique array of tones. Has some natural wear from normal use, like the buckle rash and a chip on the neck finish shown in the pictures. Overall a very clean and well playing guitar with a unique look and sound. Contact us with any questions! Thanks, Fondren Guitars
On the same topic, if you do apply some compression during recording, be careful not to overdo it. At this stage, you don’t need to hear any effect, it should just transparently control peaks. If you apply the amount of squeeze that may be needed for the mix as the part is going down, it might cramp the player’s style—better to leave that for later. Plus, if the signal is over-compressed here, it may bring out the normal squeaks and finger & fret noises so much that it becomes difficult to eliminate them later—this is especially true if the player is really a guitarist who also moonlights on bass. Guitarists who try their hand at bass parts often haven’t mastered an experienced bassist’s technique for damping the strings, and the little playing noises I referred to, as well as distracting undamped harmonics, can end up overpowering the recording if heavy limiting/compression brings them up (I recently struggled mightily to deal with a bass track that suffered from this flaw).
Be prepared for each practice session. That means, know what you learned in your previous session and whether you're satisfied you accomplished your goal for that session. If you still need time on your previous session's goal, spend another session on it. Don't move on until you have it nailed. So important. If you feel like you're not making progress with a particular technique or concept, I'm always here to help.
Place one mic on each speaker at the same distance and orientation, and check the pair for phase cancellation by panning them to the same spot and listening in mono. The minute differences between the speakers, mics, and mic positions, combined with double-tracking, creates a monstrous presence when the tracks are hard-panned in the mix, and opens up a world of possibilities for separate EQ and effects processing. If you don't need the guitar to dominate the mix, you also can sum these mono-compatible tracks together to a single pan position for a noticeably bigger sound.

Most players don’t use more than one modulation effect at once, so it doesn’t matter all that much if you place the phaser before the chorus or the flanger in front of the phaser. However, the one exception is tremolo, which should be placed behind other modulation pedals, as this placement will produce the most dramatic and desirable rhythmic on/off effects. Placing a tremolo pedal in an effects loop is also closer to the signal path of an amp with built-in tremolo, but my personal preference is to plug a tremolo pedal into an amp’s front end and save the effects loop for other effects.
Always use more than one mic, and when possible, double down on the amp as well. This will give you additional options in the mixing phase. You can split the signal to the amp by employing a stereo FX pedal or a DI. The second mic doesn’t necessarily have to be close to the cabinet and can be placed as far as 3 ft away to give you more tonal range.   
I own several guitars ranging from 700 dollars to 2000 dollars so I knew not to get my expectations up when purchasing a 100 dollar. I bought this as a gift for someone to learn on but when it arrived, I could not believe the quality of guitar this is. The tuning keys are high quality, the neck and fret board are high quality. It holds its tune as good as my Ovation and Ibanez acoustics as well as my 2000 dollar PRS guitar. Very easy to press the strings. Surely I thought this would be the difference maker from my more expensive guitars but it's actually easier to play. The pickup is a little more brighter sounding than on more expensive guitars but it's nothing you can't fix with your settings.
Many pedal builders will order their resistors, capacitors, IC, and other components in bulk online. Most of the time, this is a much cheaper method than buying single components – plus it gives you an enormous variety of components to use. It may also be wise to check out the circuit boards inside of any old electronics, or broken guitar pedals you no longer use. You’d be surprised what you may find.

{"pageName":"[mf] pdp: epiphone firebird studio electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";519377","linkInternalFilters":"javascript:,musiciansfriend.com","channel":"[mf] shop","prop7":"[mf] product detail page"}
Phasers – Sometimes called “phase shifters,” these pedals take the “copy” of the guitar signal and put the waves out of phase with each other before mixing them back together. Since those sound waves are no longer in sync, they’ll interact in unique ways, creating futuristic whooshing and swooping sounds. Look back to late 1970s and early ’80s rock music, and you’ll see lots of examples of phasers in action.
This is another classic in Fender's guitar roster. The Squier by Fender, Vintage Modified '51 is another example of how phenomenal Fender is as a company. This guitar is capable of producing versatile tones because of the SH pickup configuration and rotary pickup selector. The neck of this guitar is C-shaped which makes string bending easy as you like. This guitar has a strat body shape which adds to its cool, classic look.
Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
When guitarists sit around and debate tone, they pontificate on the properties of this instrument or that amp. But frequently there’s a factor in the equation that is forgotten. Our templates of what we consider to be great tone are not simply a formula of instrument + amps + musician. Recording studios also play a vital role in the creation of those sounds.
Launched in the late 1990s the SE models are manufactured in South Korea by a third-party company (World Musical Instruments) then shipped to re-sellers and dealers in the United States. This is a major part of the cost-cutting technique, in addition to a more flat (as opposed to carved) body shape and cheaper pickups/electronics. So be advised, I’m not telling you that you’re getting a $2000 guitar for $600.
The neck, which extends from the guitar body, includes the fretboard and headstock on which the tuners are mounted. It contains a metal truss rod that prevents neck bowing and twisting, and can be adjusted to help the guitar maintain consistent pitch. The fretboard is usually made from a thin layer of rosewood or ebony, although some models, usually with maple necks, have a fretboard made of the same wood as the neck. Most fretboards have position dots or other markers inlaid in the fretboard. Some models have markers on the upper edge of the fretboard offering the player easy visibility.
Next important control knob is usually labeled as time or rate. This defines the length of echoes in a reverb. You can have them short or you can have them last for a fairly long time. Which side you will lean more towards is going to depend on the nature and tempo of your music. Slower, more subtle riffs can easily deal with long reverb times while faster sections usually work best with short reverb. Again, experimentation is the key here.
Unabashedly brute class, with typical German overbuilding, the Schallers shown here are the Incredible Hulk of the bunch (Fig. 17). At a hefty 272 grams, they have the might to get noticed when you fasten them to your axe. If you have a guitar with a tiny headstock, you’ll hear and feel a difference with the Schallers. Whether or not you like the change is subjective, and it depends on the makeup of the rest of your guitar.
Tube technology is very much alive in today's digital age, thanks to guitarists who just could not let go of the sound of the past. Even with amp modeling inching closer and closer, there's just no replacing the warmth and organic response of tube amps, especially when recording. Still, there are practical drawbacks with this old technology, mostly due to its fragile nature and extra parts. Because of this, tube amps tend to be heavier and more fragile. Solid-state amps on the other hand have less parts to worry about, and are normally more sturdy and reliable. They are also usually paired with either digital or analog based amp modeling, which allows for a wider selection of tones, albeit without the x-factor that tube adds to amps. Because of this, there are some manufacturers who combine both tube and solidstate circuitry in one amp, but at the end of the day, these hybrid amps will require the same handling care and maintenance as a regular tube amp.

With a body shape that looks like it could have been cut out by hand using a saw in your garden shed, this Kay Old Kraftsman Sizzler guitar manages to be crude and quite fantastic at the same time. "Old Kraftsman" was actually a brandname used on Kay guitars sold by Spiegel stores. The maple neck gives it a rather Fender-like appearance, but this is in fact a set neck and not a bolt-on.

There was a second single-cutaway version, also called the TRG-1, with a thick waist and vaguely tubby Tele shape. It had a different grill shape and a slightly more rounded version of the Bizarro Strat head, but otherwise it was the same. There was also a version of the double-cutaway guitar with a vibrato. This was a small, metal-covered tailpiece with three springs in the housing and a handle that screwed into a hole in the cover.
Our 4 yr old grandson picked this guitar out and we purchased it for him as his Christmas present, he absolutely loves it. His dad has been teaching him to play it and he said that you can actually plug the guitar into his amp instead of the one that came with it. Our grandson will most certainly grow into this guitar and will get many hours of playtime with this guitar.
Taylor does produce a more budget friendly line of instruments with the 200 series, which is ideal for beginners looking to capture their famous sound at a fraction of the price. Taylor also produces small bodied guitars such as the Baby, Big Baby and GS Mini, which rival their full bodied instruments at a lessened price and are perfect for kids and beginners to learn on (6).

For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound. 
The actual value of the pot itself does not affect the input to output voltage ratio, but it does alter the peak frequency of the pickup. If you want a brighter sound from your pickups, use a pot with a larger total resistance. If you want a darker sound, use a smaller total resistance. In general, 250kΩ pots are used with single-coil pickups and 500kΩ pots are used with humbucking pickups.

We are very proud to present to you a pleasant surprise I must say from way back when folks this is prime Time beginning of that Golden Era of some of the GREATEST QUALITY Acoustic guitar that FENDER ever had the smarts to Import… that’s right these are Japanese crafted beauty’s . Built back in the day when Japan had the economy riding high while US guitar builders were getting bought out by business folks not guitar builders and US economy was in the tanker just a little brief history reminder… Fender & Gibson were under the gun to cut costs and re-structure if they wanted to stay alive and that they did…. CBS , Norlin…. And others cut back on the high quality woods they once enjoyed and relied upon the reputation the US had for making great guitars basically reputation from the late 50’s – early 60’s To about 68-69 or so…. Then quality went down no doubt…. Right then it was prime time for Japan Luthiers to strike and they did…they stepped up the quality from the funny toy grade guitars we saw here in the states back when I was a kid you could get a decent cute player electric guitar at the Pawn shop in about 1965 for about $69.00 in fact my dad bought my 1st electric guitar there for $69.00 … I loved it—it was a “ KENT” and it sounded very good threw my Silvertone amp….. ..Kent is a offspring of Greco which is a factory behind making many brands buildby Fujigen Gekki…. Ok what this Fender beauty traces back to the great FujiGen Gakki in 1974 according to its serial number… making this beautifully preserved SOLID TOP Vintage Japanese guitars 40 years old a true vintage guitar in its own right. It was during the time when this guitar was built that the Japanese Luthiers set out to make some of the most righteous guitars period… fit – finish - workmanship & materials used are the good stuff folks….. This full size Dreadnought Acoustic guitar is a replica of the Martin designed D-28 known to be one of the finest most prolific designs the US Martin & co ever produced. This Fender F310 is of a High Quality example, The top is Solid Spruce straight grained with some nice figure and wow it has 40 years of patina to its color and finish and overall vintage appeal is Very strong… I was drawn to this example it sounds deep and rich and complex with an excellent volume And its highs ring threw when cording and finger picking , This guitars Back & sides are true to the masterful D-28 desigh …. High quality ROSEWOOD just beautifully grained see the pics for more detail Its absolutely beautiful back – sides are all east Indian Rosewood the fingerboard may be Brazilian Rosewood by its looksa very high grade non theless, the bridge appears to be Ebony wood….. the Bridge is nice and flat to its top which is also nice and straight, action is very good medium low and adjustable. The top has a couple of minor doinks see the pics not bad at all and certainly nothing remotely enough to detour from its vintage Gorgeous looks , no cracks anywhere found , bindings are very food, overall this guitar is an EXTREMLY CLEAN example aside from the afore mentioned . This guitar is in top Vintage used condition and is easily a 9//10 Fit and finish I suggest this was built but a high level Journeyman and can compete or compare with A nice vintage Yairi or Morris or Gibson or Martin for that matter…. .

Gretsch: Here’s another company that has been making instruments for over 100 years. Of German descent, Gretsch was established in Brooklyn in 1883 by Friedrich Gretsch. The company didn’t start making guitars until the early 1950’s when electric guitars actually became popular. With origins on banjos and mandolins, Gretsch has always been big in the country market. The endorsement by Chet Atkins has helped further cement this. Another very popular endorsee, Brian Setzer, has helped Gretsch hollowbody guitars earn a rightful place in guitar history. Like Gibson and Fender, they also produce basses, acoustics and amplifiers. Furthermore, Gretsch has a hugely successful line of drums. In 2003, Grestch set up an agreement with Fender essentially handing over the control of manufacturing and distribution. Most Grestch’s tend to be up in the pricier range. For more affordable Gretschs, look into the Electromatic series.
I haven't listened to all the amps on the list but found the Rivera Knucklehead blew away every Fender, Marshalla and Mesa in the shop when I was testing things out for the clean blues with a PRS. My daughter playfully plugged in a Gretsch baritone, cranked up the gain and Three Days Grace came screaming out with the finest quality. She agreed the Knucklehead was a win.
I start at zero and work the bridge, stopbar, neck and pickups from there until I all feels and sounds right, takes some time but not too much. I only do this with new guitars and when I total strip one down maybe once a year. Living in the North East and having 4 season you have to adjust all the time, unless you live in a climate controled home and never go out. If you can do all these adjustments yourself and become one with your guitars I think your way ahead of the game.

The same no-compromise attitude that gives the Redondo Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech NuBone nut and saddle for greater sustain, and a Fishman preamp system (with bass, treble, volume control and tuner) that makes it easy to plug in without sacrificing the guitar’s natural sound. The lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style and its laurel fingerboard and bridge further augment its vibrant tone.

Our 4 yr old grandson picked this guitar out and we purchased it for him as his Christmas present, he absolutely loves it. His dad has been teaching him to play it and he said that you can actually plug the guitar into his amp instead of the one that came with it. Our grandson will most certainly grow into this guitar and will get many hours of playtime with this guitar.
These bundles usually throw in a gig bag, so you don’t have to spend extra money to safely transport your gear, as well as spare picks, strings, and an instructable DVD that will help you learn some essential guitar techniques quite fast. You might also want a bundle that comes with a clip-on tuner so that you make sure you can keep your guitar well-tuned on the go.
Just for fun, try taking this inverted approach to setting string height: instead of getting them as low as you can without inducing serious buzzing, set your strings as high as you can have them and still be able to play with some reasonable facility. Doing this correctly might also require adjusting string intonation at the bridge saddles, because their angle and distance across their speaking length is now changing slightly, too, but for now just try it as is, in case you choose to return your action to point one. (Note that raising string height at the bridge might need to be coordinated with a tweak of neck relief at the truss rod, although I will leave that to your own best judgment as there is plenty of debated between the flat-neck/slight-relief crowds, and this determination will depend upon your own preferences.)

The Afterneath gets a place on our favorites list, largely because of the "Drag" feature that allows you to sort of delay the decay of your reverb effect, giving off an ambiance that trails off behind each original note as it bleeds into new notes. It's a very unique reverb effect, which blends particularly nicely with a fretless bass in the example video below. 

Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.