The Gruhn Guitars repair shop has been world renowned for decades for its unrivaled expertise, skill, and respectful repair practices. Though our full-time staff of luthiers primarily focuses on repairing and restoring the instruments we make available for sale, beginning in 2016 we are also pleased to offer our repair services to loyal customers as an extended benefit of buying an instrument from Gruhn Guitars. Instruments purchased from Gruhn Guitars will be moved to the front of our repair queue and will be repaired at a discounted labor rate. As a sign of our appreciation for your business, Gruhn Guitars is here to help you for years to come to keep your instrument in the same prime working order as when it was listed for sale at the shop.
That said, however, the volume knob can help you conjure a variety of tonal characteristics that can come in handy provided you play with dynamics. Using a volume knob in this context can allow such cool maneuvers as having different tones for verses and choruses, or for various styles of music. To get a handle on how your guitar’s volume dial or dials can affect tone, plug in and fire up your amp until it’s growling with overdrive. Start with your guitar’s volume pot at 10 and begin rolling the dial back in increments. As you go, you’ll hear not only a decrease in loudness, but your sound will clean up and experience variations in its harmonic characteristics.

In 1967, McCartney gave his 4001 a psychedelic paint job, as seen in the promo film for Hello Goodbye, and in the Magical Mystery Tour film.[7] A year or so later the finish was sanded off; a second over-zealous sanding in the early 1970s removed the “points” of the bass’ cutaways. McCartney predominantly used the Rickenbacker bass during his time with Wings, until the late 1970s.
Boost/volume pedal: A boost or "clean boost" pedal amplifies the volume of an instrument by increasing the amplitude of its audio signal. These units are generally used for "boosting" volume during solos and preventing signal loss in long "effects chains". A guitarist switching from rhythm guitar to lead guitar for a guitar solo may use a boost to increase the volume of his or her solo.[59]
The “fatter wire = fatter tone” equation is nothing new. Ever since jumbo frets have been available, many great players—Rory Gallagher, Stevie Ray Vaughan, Kenny Wayne Shepherd— have been known to re-fret their Fender Stratocasters in particular with jumbo wire (vintage-spec Strats arguably provide a more dramatic before and- after picture than some other guitars, since they were born with narrow frets). More metal in any fixed component usually means a greater vibrational coupling between string and wood, so there is presumably something to this theory. But what else changes with fret size?
I don't need freaky pointy demon guitar graphics or anything like that.....this $249 Agile makes my mouth water. For the price of two cheap pedals or one great pedal it's a guitar that you could work with. Ibanez makes the stylish P90 Jet King for about $375...If I were on a tight budget I'd rather have the basic Agile. Yes I'm aging! Get off my lawn you Jet King kids!!

Delays can also be set to many repeats that take a long time to be reiterated.  This creates a very spaced out sound that envokes large environments.   Be careful with how loud and how many repeats you get going, because older analog delays will begin to experience a feedback loop and can blow out your speaker easily.  Some players learn to control this and have an entire new effect in their arsenal.  Delays are a super powerful tool that just never seems to run out of new sounds.  You can tweak knobs for days and never get bored!
i bought one in 1966, my first guitar, i paid 38.99 for it at a gibson dept. store in ft. worth, tx. it was mij under the same name and was marketed in canada as regent guitars and in the u.s. later as kent guitars. it is in the same catagory (some say better) as teisco its competator, some say there was some interfacing between the 2 companies. i really enjoyed it and wish i still had it, it played great and sounded great. i found this while surfing 4 another!!!

Gibson guitars have a shorter 24.75-inch scale length, giving them a looser feel and a somewhat warmer tone. They feature resonant tonewoods, typically mahogany for the body and neck. The neck is set in place and glued instead of bolted. Les Paul-style instruments have carved tops made from another tonewood such as maple, but other instruments such as the SG have flat tops like the Strat. If something goes wrong with this kind of guitar you may be able to repair it yourself, but issues like broken necks and headstocks require work done by a professional luthier.

The objects connected to the red and purple wires are a capacitor and resistor in series. The round brown object is a capacitor, typically around .001 microfarads. The rectangular brown object is a resistor, typically around 150K ohms. Increasing the value of the capacitor will expand the treble range you're preserving. Too large a value, end you'll be preserving midrange, too. Too small a value and you'll only be preserving the highest treble frequencies. 

Description: Body: Alder - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 3+3 - Bridge: Fulcrum Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Duncan Designed - Pickup Configuration: S-S-S - String Instrument Finish: Transparent Colors
Harry Rosenbloom, founder of the (now-bankrupt) Medley Music of Bryn Mawr, Pennsylvania, was manufacturing handmade guitars under the name "Elger." By 1965 Rosenbloom had decided to stop manufacturing guitars and chose to become the exclusive North American distributor for Ibanez guitars. In September of 1972 Hoshino began a partnership with Elger Guitars to import guitars from Japan. In September of 1981, Elger was renamed "Hoshino U.S.A.", retaining the company headquarters in Bensalem, Pennsylvania as a distribution and quality-control center.
4x vintage revvo castors as used on loads of vintage cabs, combos ideal if you have a vintage cab and want period correct castors What you see in the photos is what you get, this is the second set I have for sale, the rubber wheels have split and their are chunks missing out of a few. (this is reflected in the price) this isn’t an issue if your cab is just going to stand in your front room looking cool. please do study the photographs Free postage in the UK Anything else just ask
Intraday Data provided by SIX Financial Information and subject to terms of use. Historical and current end-of-day data provided by SIX Financial Information. All quotes are in local exchange time. Real-time last sale data for U.S. stock quotes reflect trades reported through Nasdaq only. Intraday data delayed at least 15 minutes or per exchange requirements.

Whether you’re young or old, there’s no better feeling than learning to play an instrument. While many attempt to learn the guitar, it is unfortunately very common for beginners to give up after only a couple of months. Guitar lessons with an instructor can be expensive and it can be frustrating if you’re not seeing progress immediately. That’s where ChordBuddy steps in, offering one of the easiest and quickest ways to learn to play the guitar in 60 days or less. Simple, effective, and affordable, this guitar learning device has shown great success among beginner guitar players of every age. Use this handy guide to learn everything you need to know as a beginner guitarist. You’ll be playing your favorite song in no time at all!
Having a tuner on your pedal board is useful but these days I more often use a clip-on tuner, specifically the TC Electronic Polytune Clip (Buy at Amazon UK, Amazon US). I don't like the main signal to run through the tuner all the time if I can help it (I use the GigRig G2 switching system) but if you don't have that luxury, then look for a tuner with True Bypass like the TC Electronic Polytune 2 (Buy at Amazon UK, Amazon US) or use a Volume pedal that has a Tuner Output (many do these days!).
Other notable effects include the tube-driven Leslie speaker series, which originally modified the sound of electric organs (such as the Hammond B3) until guitarists like George Harrison (and the Beatles more generally) began to use it for spacey chorus, tremolo, and phaser tones. The classic 60s model, the Leslie 122, was housed in a huge 41-inch wooden laminate casing and comprised of two motors (essentially two electromechanical horns) that had been rotated to create a Doppler-effect-based vibrato. These horns were, in turn, picked up by the dual speaker units. The Leslie 122 wasn’t even built to connect to a guitar, but bull-headed technicians fudged the electronics and made it work anyway. The laminate wood wasn’t just for aesthetics, either: It functioned as a partial enclosure, ensuring mellower tones, and different woods created different vibratos.

Some bass amplifier combos have a "whizzer cone" attached to the low frequency woofer's centre. The whizzer cone is about the same size as a dust cap, although it resembles a miniature speaker cone. The whizzer cone handles the upper frequencies that are too high for the woofer. Roland's 60 watt and 120 watt bass combos contain both a woofer and a whizzer cone.


Steve Albini, on the other hand, finds it useful to think in terms of blending 'bright' and 'dark' mics. "Normally I'll have two microphones on each cabinet, a dark mic and a bright mic, say a ribbon microphone and a condenser, or two different condensers with different characters." Eddie Kramer's discussion of his Hendrix sessions reveals a similar preference: "Generally speaking, it was either a U67 or a Beyerdynamic M160, or a combination of both, which I still use today. It might be slightly different, of course, but the basic principle's the same — a ribbon and a condenser."
On PremierGuitar.com, "Sponsored Content" refers to articles, videos, or audio recordings that are produced or curated by an advertiser but that Premier Guitar is happy to share alongside our own editorial content due to the Sponsored Content’s educational, musical, or entertainment value. Sponsored Content is clearly labeled everywhere it appears, and Premier Guitar's editorial department has no involvement in its creation.

Fuzz pedals take distortion, and further distort the tone resulting in a sound that can really only be described as fuzz. This effect was originally achieved by accident, often due to broken speakers or electrical components in a guitar amp. Many contemporary blues-rock guitarists continue to use this effect due to its in-your-face tone. A fuzz effect can also be heard in Jimi Hendrix’s rendition of the “Star Spangled Banner.”


Martin is an American guitar company specializing in acoustic guitars. Most of their instruments are still built at their facility in Nazareth, Pennsylvania, and their legacy dates back all the way to 1833. Martin, in many ways, has helped to shape the look and sound of the American acoustic guitar. In fact, they invented the now-classic dreadnought shape in an effort to help American country musicians who wanted more projection out of their guitars onstage.

Ultimately, be aware that the key to sounding the way you want lies in your hands and your head more than anywhere else. The way a player attacks the strings — the nuance, dynamics, and subtleties of the playing technique — usually has a bigger influence on how he or she sounds than any other single ingredient in the rig. Try to play mindfully, being keenly aware of the variations in sound produced when you simply play the guitar differently, and you will quickly develop an original voice.
One very interesting and strikingly modern Teisco guitar, the YG-6, appeared in Japan in 1965. It was very near the classic Strat shape, with offset double cutaways and Strat-like contours, but the horns were more pointed. The neck had the new hooked headstock and the rectangular edge inlays. A large multi-laminated pickguard stretched from the upper horn down to the lower bout control extension. Three large rectangular single-coil pickups, with chrome sides and black center insert (exposed poles) sat in front of a roller bridge and the clever platform vibrato design. Three on/off rocker switches sat above the strings, plus a small sliding switch, presumably a mute. It had one volume and one tone control, and is an exceptionally handsome guitar.
While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.
What makes the wah so timeless is its versitility, it can emulate a human voice, be a rhythmic device, boost a screaming lead, a tone shaping tool, among other uses.The first known commercial recording of a wah pedal is Cream’s “Tales of Brave Ulysses”. As we know the distinctive sound caught on with just about every guitar player on the planet! There are too many uses of the wah to mention here, almost 50 years later it is still a must have pedal for every guitarist. For an in-depth look at wah history and a great read please check out “Analog Man’s Guide To Vintage Effects”.

My first guitar, bought out of an advert in Kerrang over 20 years ago. I think it was branded "Axe" and it had absolutely nothing good about it. Some sort of MDF body, horribly bowed neck (couldn't be adjusted as the truss rod was broken), high frets everywhere (you could pull them out with your fingernails, fortunately), slipping tuners, hopeless bridge, hopeless nut, everything. Nearly put me off playing before I'd got started.
Austin-based John Grammatico is building some of the best amps available, and with his current range of products he’s managed to capture the spirit of legendary vintage amps while utilizing modern reliable components. The LaGrange is a small 15 watt amp that will sound great with either single coils or humbuckers. Expect a warm, woody sound with throaty mids and bell-like highs. The sound is transparent, harmonically rich and well worth the investment.
Gibson's factories were raided in 2009 and 2011 by agents of the United States Fish and Wildlife Service (FWS). In November 2009 authorities found illegally imported ebony wood from Madagascar.[37][38] A second raid was conducted in August 2011,[37] during which the FWS seized wood imports from India that had been mislabeled on the US Customs declaration.[39][40] Gibson Guitar Corp. filed a motion in January 2011 to recover seized materials and overturn the charges, which was denied by the court.[41][42]
{ "thumbImageID": "IJXB150B-Jumpstart-Bass-Package-Red/H86341000005000", "defaultDisplayName": "Ibanez IJXB150B Jumpstart Bass Package", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Red", "sku": "sku:site51337871402773", "price": "279.99", "regularPrice": "279.99", "msrpPrice": "434.00", "priceVisibility": "1", "skuUrl": "/Ibanez/IJXB150B-Jumpstart-Bass-Package-Red-1337871402773.gc", "skuImageId": "IJXB150B-Jumpstart-Bass-Package-Red/H86341000005000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/IJXB150B-Jumpstart-Bass-Package-Red/H86341000005000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51337871402692", "price": "279.99", "regularPrice": "279.99", "msrpPrice": "434.00", "priceVisibility": "1", "skuUrl": "/Ibanez/IJXB150B-Jumpstart-Bass-Package-Black-1337871402692.gc", "skuImageId": "IJXB150B-Jumpstart-Bass-Package-Black/H86341000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/IJXB150B-Jumpstart-Bass-Package-Black/H86341000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Walnut Sunburst", "sku": "sku:site51441035713446", "price": "279.99", "regularPrice": "279.99", "msrpPrice": "434.00", "priceVisibility": "1", "skuUrl": "/Ibanez/IJXB150B-Jumpstart-Bass-Package-Walnut-Sunburst-1441035713446.gc", "skuImageId": "IJXB150B-Jumpstart-Bass-Package-Walnut-Sunburst/H86341000006000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/IJXB150B-Jumpstart-Bass-Package-Walnut-Sunburst/H86341000006000-00-60x60.jpg", "imgAlt": "" } ] }
Since 1946, the P-90 has been pleasing guitarists with its vintage-soaked tone, that shares qualities of both single-coil pickups and humbuckers. P-90s are primarily single-coil in their construction (although larger and flatter), and come in a range of different housings. Although they feature a relatively low output, they provide a meatier tone than a single-coil, but with a bit more sparkle than a humbucker, and are therefore very versatile. They have been put to great use in rock, blues and jazz music, with Pete Townshend, Tony Iommi, and Carlos Santana all taking advantage of the sweet P-90 tone. On our chart above, the Seymour Duncan Antiquity is a great example, but check out more P-90 highlights on the dedicated page.
Developed by Martin in 1916, the dreadnought shape changed the landscape of acoustic guitars. Thanks to its punchy sound, loud volume and improved bottom end, dreadnoughts quickly rose to popularity and has since been copied by virtually every acoustic guitar manufacturer. Today, if you're thinking acoustic guitar, the most probable image in your mind would be of a Martin Dreadnought or one of its many clones.
Martin never actually produced Stinger catalogs, so a detailed accounting is pretty difficult. However, there were four basic Stinger body styles, a fairly conventional Strat shape, a Strat-style with an arched top, a Tele and a Fender-style bass. These came in a variety of finish and pickup configuration options. Headstocks were a kind of modified Strat-style six-in-line, with a pointed throat and slightly hooked nose, with a painted triangular Stinger logo running under the strings. All had bolt-on maple necks. Guitars had a 25.4″ scale, while the basses were 34″ers.
Can you scientifically prove the role of these influencers? Lab geeks and gadget gurus can measure signal strength, decibels, frequency distribution, gamma radiation, and other ranges. They can graph this data, create new data by creating logarithms, create even more data by creating even more logarithims, but they can’t decide what’s good or bad. Like it or not, you simply can not use a computer to prove that a ’63 Strat sounds “better” than a cheap 1988 import.
Years of hard-earned success and fame have not changed his down-to-earth attitude. Even though he has become one of the world’s richest rock stars, he hasn’t married a supermodel or become a pompous art collector. Instead, he’s remained true to his working-class roots, spending his spare time building incredibly cool kustom cars and cruising the streets with his car club buddies, the Beatniks of Koolsville.
Power amp clipping is not the same thing as preamp/preamp tube clipping. Sending a power amp signal that is getting power amp clipping to a speaker can blow the speaker. Sending a preamp/preamp tube clipped signal through a speaker is not harmful. In practice, part of the "breaking up" amp sound, of a "cranked" amplifier, which is widely appreciated by hard rock, metal, punk and blues musicians, is a mix of preamp and power amp clipping. One of the benefits of using a separate components head system, in which a separate preamp and power amp are mounted in a rack, is that the bassist or bass tech can watch for the clipping warning LED on the power amp and lower the power amp volume, if necessary.
A: If it looks like a ??? it almost certainly is a ??? Because the factory used to change the hardware at a whim there will be slight variations. This has, in most cases, nothing to do with a particular year but more to do with what happened to be to hand at the time. Some exceptions are pickups, pickguards, logos and headstocks. All I know is here on the website if you look hard enough. Also bear in mind that your guitar may have been modified at some stage in its life.

The first of the easy guitar chords for beginners is E minor, followed by E major. Next you learn A minor and C major, all in the open position, which means the chords contain open strings and are played at the nut position. The next chord is D major, followed by A major. You will learn the B major chord, which is a barre chord with the root note on the A string. After this you learn the B7 open chord, which sounds really nice.


Materials for necks are selected for dimensional stability and rigidity, and some allege that they influence tone. Hardwoods are preferred, with maple, mahogany, and ash topping the list. The neck and fingerboard can be made from different materials; for example, a guitar may have a maple neck with a rosewood or ebony fingerboard. In the 1970s, designers began to use exotic man-made materials such as aircraft-grade aluminum, carbon fiber, and ebonol. Makers known for these unusual materials include John Veleno, Travis Bean, Geoff Gould, and Alembic.


I've been to a PRS factory and seen the precision and skill with which they are made. Their quality control is incredible: they test each one individually and make adjusments until it is perfect. They won't let a bad one get through so if you buy a PRS guitar, you are guaranteed a high quality guitar. I mean, with the high price you pay, how could they not be wonderful? Plus, they sound, feel, and look amazing. (I also got to see Paul himself; it was pretty cool. What a nice, humble guy.)
Based on SGM-v2.01 (http://www.geocities.jp/shansoundfont/) with improved quality aoustic guitars (21mb) and basses (50mb) and also designed to run on apps such as Sweet Midi Player. This is a great GM SoundFont and the one I use on iPad/iPhone and PC.  You can comfortably run this GM Soundfont in Sweet Midi Player app on most iOS devices. For Windows PC you can install a new GM soundfont using the free program Coolsoft VirtualMIDISynth.
As players such as Bobby Broom, Peter Bernstein, Howard Alden, Russell Malone, and Mark Whitfield revived the sounds of traditional jazz guitar, there was also a resurgence of archtop luthierie (guitar-making). By the early 1990s many small independent luthiers began making archtop guitars. In the 2000s, jazz guitar playing continues to change. Some guitarists incorporate a Latin jazz influence, acid jazz-style dance club music uses samples from Wes Montgomery, and guitarists such as Bill Frisell continue to defy categorization.
Yea, really depends on your area. At the local Guitar Center, the guy seems to know what hes doing. Overworked and underpaid if what iveheard about GC and Sam Ash techs is true though. Theres a local tech who got his site to be one of the top results and hes busy as well. Perfect work. And even though hes busy, hes fast too. Thats why his site is one of the top results though.
The dynamic mic’s strengths for close-miking constitute some of its weaknesses in distant-miking, and you’ll more likely want to use a ribbon or condenser mic for this job, if you have one. Distant miking really begins at 10″ to 12″ out, where many condenser and ribbon mics start to bloom. As a rough guide, start 12″ to 18″ from the speaker in order to record an electric guitar sound that is still pretty solid and direct, but captures some sense of air and space and natural room reverberation. You can aim the mic straight at the center of the speaker for a bright and detailed tone, as described in our close-miking techniques above, or move it around in the field, trying different direct and off-axis placements. Any position that achieves a desirable tone is valid, and you don’t have to remain on the same plane as the speaker itself. Moving the mic out adds more space to the sound (while potentially compounding phasing issues – see below). Raising the mic above the speaker and aiming it down slightly to fire toward the upper edge of the cone can let the sound bloom as it reaches the mic. In a room with a carpeted floor, you can position the mic lower to the ground (even below the speaker itself) to cut out some of the reflected sound. Positioned as such, an end-fire mic can be shooting either toward the amp on a plane that hovers above the floor or at an angle toward the speaker, while a side-fire mic can be aimed either way or fire straight at the ceiling with the amp sound washing over its capsule.

The SG retains a similar dual-humbucker configuration as the Les Paul Standard but it truly has a life and style all its own. Due in part to its aggressive style, impressive mid-range bite and thunderous output, the SG has become synonymous with rock ’n’ roll. The Gibson SG is one of only a handful of models that has never been out of production since its introduction in the early ’60s.


It’s easy to remove your pickup or pickguard and slide some foam rubber behind the unit. Start with soft foam first, and then increase the density to find the difference you like. Conveniently, the gray foam used in aftermarket pickup packaging makes great damping material: It’s soft enough that you can double it up (see Fig. 1 and 2) to create more pressure on the pickup’s back plate, too. This is a relatively no-frills mod that requires minimal materials and tools.
Three CraViolas were offered. These had a strange asymmetrical shape with a pear shape, no waist on the bass side and sharp waist (and almost cutaway taper) on the treble. Soundholes were D-shaped with fancy rosettes, with a pointed tortoise guard on the steel-stringed versions. These had slotheads with a Woody Woodpecker-like peak pointed bassward. The bridges were similar to the mustache version on the Country Western. The CRA6N Classic ($150) had a yellow spruce top and full-grained Brazilian rosewood body, no inlays or pickguard. The CRA6S Steel String ($160) was a similar steel-string with pin bridge and diamond inlays. The CRA12S 12 String ($175) was the 12-string version.
Notch filters (also called band-stop filters or band-rejection filters) are sometimes used with double basses. Notch filters are filters that allow most frequencies to pass through unaltered, while attenuating those in a specific range to very low levels. Notch filters are used in instrument amplifiers and preamplifiers for acoustic instruments such as acoustic guitar, mandolin, and bass instrument amplifiers to reduce or prevent feedback. While most notch filters are set manually by the user, there are also automatic notch filters which detect the onset of feedback and notch out the frequency before damaging feedback begins.
Last fall, Ubisoft released a new version. But Rocksmith 2014 is considered a replacement rather than an update: The company is trying to rebrand the franchise not as a game but as a teaching tool. The box bears a fat label proclaiming "The fastest way to learn guitar," and Ubisoft launched an ad campaign promising that Rocksmith 2014 could teach prospective shredders to play guitar or bass in just 60 days.

Considering that all of the other small-sized guitars we tested were much flashier, I was shocked when our teenage testers, Alana and Charles, both picked the Epiphone Les Paul Express as their favorite short-scale model. It turns out our younger panelists didn’t care at all about the style of the guitars, they cared about comfort—and for them, the Les Paul Express was as comfortable as an old sweatshirt.


More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.
In the 1920s, it was very hard for a musician playing a pickup-equipped guitar to find an amplifier and speaker to make their instrument louder as the only speakers that could be bought were "radio horns of limited frequency range and low acoustic output". The cone speaker, widely used in 2000s-era amp cabinets, was not offered for sale until 1925. The first amplifiers and speakers could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
Pitchshifters change the pitch of the note played via a user-specified amount. The range of pitch deviation depends on the equipment used, but many pedals are capable of raising and lowering the pitch two octaves above and below the fundamental pitch. The amount of pitch deviation can be set or controlled via a foot pedal (which typically offers smooth, continuous pitch control). Typically, such function will be used with the original signal, resulting in a Harmonizer: the pitch is altered and combined with the original pitch to create two or more note harmonies. These harmonies are typically programmed in discrete integer multiples of the fundamental tone. When used with an expression pedal, it provides a smooth, abeit slightly digital, bend-like effect. Pitch shifters can also be used to electronically "detune" the instrument. Some examples are:
I've been a lazy person in terms of writing product reviews, but had to chime in on the Epiphone LP purchase. First of all, I did research on new guitar options at the local Guitar Center website and settled on this instrument. They had it for $199, so for kicks I looked on Amazon two nights before I had planned to test and buy at our GC on a Sat. Amazon had it for $159 and $199 for lots of extras. I already had a case and nice Marshall Amp, so only needed the guitar. The best part, it arrived on Sat about the same time I would have purchased locally. The reviews were so good, I was not worried about testing live before purchase and it was a great choice.
Similar to Jackson guitars, B.C Rich is famous for their sharp jagged edges and heavy metal sounds. The influence of their hard rock and heavy metal sound spans decades. Bands such as Motley Crue and Slayer are just a few of the bands that made B.C Rich guitars such a huge staple in the world of heavy metal. When you see the shape of B.C Rich guitars, there is no doubt as to what kind of music is going to come from them. B.C Rich offers a decent selection of guitars ranging from beginner up to pro-level instruments. They even have models that don’t have that signature “heavy metal” jagged style. Most B.C Rich guitars have a mahogany body and at least some of the components are made from rosewood. Obviously, the quality depends on the price, but even their highest priced models could still use a few upgrades to really bring up the sound quality.

A: If it looks like a ??? it almost certainly is a ??? Because the factory used to change the hardware at a whim there will be slight variations. This has, in most cases, nothing to do with a particular year but more to do with what happened to be to hand at the time. Some exceptions are pickups, pickguards, logos and headstocks. All I know is here on the website if you look hard enough. Also bear in mind that your guitar may have been modified at some stage in its life.
Kansas guitars has been around since 1927. They made some very nice guitars. Some expensive and some inexpensive. But the real question is whom makes the guitar for Kansas? And that is non other then Cort. Yes Cort makes guitars for just about everybody and you dont even know. the big secret is cort guitars themselves are very well made but cheaper then most brands, but same or better quality then highline guitars. Cort bailed out fender and also built Fenders for many years. So in short Kansas is a well made guitar and there set neck models are awesome and run about $400 to $600. You cant get a set neck today for under $800. And if you want to see how many guitar brands have cort making there guitars do some research on Cort and you will be surprized. They have been around for ever and are the elite company in the business.

While the bulk of new players will likely want an amplifier for their electric guitars, acoustic-driven music is still plenty popular amongst players of all skills. And while acoustics are fairly loud on their own, some players still want to pump up the volume from time to time, as well as shape their sound. And you can do all that without sacrificing the warmth of your guitar’s sound with the Behringer Ultracoustic AT108. Perfect for home practices and coffee shop performances, this amp was specifically designed to enhance the volume and tones of an acoustic guitar (or, more accurately, an acoustic-electric). It also has a secondary microphone input to amplify your voice alongside your guitar.


Rackmounts are most commonly used in recording studios and "front of house" live sound mixing situations, though professional musicians who play electric bass, electric guitar, or synthesizers may use them in place of stompboxes, to create a rackmounted head unit for their speaker cabinet(s). Rackmounts are controlled by knobs, switches or buttons on their front panel, and often by a MIDI digital control interface. During live performances, a musician can operate rackmounted effects using a "foot controller".[14] By setting up effects in a rack-mounted road case, this speeds up set-up and tear-down, because all of the effects can be connected together with patch cords (which can be left connected permanently) and all of the units can be plugged into a power bar. This means that a musician only needs to plug in the main power bar into AC Mains power and plug their instrument into the rack, and the last effect unit's output into their instrument amplifier and/or the PA system.
My granddaughter really liked this book. I know it was used but the CD and the wall chart were missing. I wish that would have been noted in the comments. Some of the other book sellers noted that one or the other of these were missing so I didn't order from them. Nothing was noted in the comments on this. My granddaughter was happy with the book and wanted to keep it.
I have a friend with a cool little music store here in St. Louis. I pop in from time to time since he always has a great selection of vintage lap steels, as well as an ever-changing assortment of oddball pieces to check out. As I was on my way out the door after one of my most recent visits, I spotted an early 80s Harmony “Flying V,” and immediately stopped in my tracks.
{ "thumbImageID": "A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000", "defaultDisplayName": "Hohner A+ AS355CE Solid Top Cutaway Dreadnought Acoustic-Electric Guitar With Gig Bag", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000205693", "price": "339.99", "regularPrice": "339.99", "msrpPrice": "339.99", "priceVisibility": "1", "skuUrl": "/Hohner/A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst-1500000205693.gc", "skuImageId": "A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000", "brandName": "Hohner", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/A-AS355CE-Solid-Top-Cutaway-Dreadnought-Acoustic-Electric-Guitar-With-Gig-Bag-Tobacco-Sunburst/L00350000002000-00-60x60.jpg", "imgAlt": "" } ] }

You know you’re getting great guitar from the outset, because it’s based on Gibson’s legendary Dove model, which has been sued for decades now by distinguished guitarists in numerous genres, including the likes of Elvis himself. It really does look the part, with the dove design on the fretboard and pickguard, and numerous other nice little touches.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(901) 387-0600, visibilitySalePrice=799.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114488369, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Fri Oct 12 01:23:44 PDT 2018, invMsgAvailability=, serialized=false, listPrice=799.99, isShipsInternational=false, name=Fiesta Red, storeCity=Bartlett, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Memphis, newPrice=799.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=799.99, warranty=true, storeId=722, displayId=114488369, stickerDesc=, isOnSale=false} 799.99 USD

I've contacted them once before and they are SO eager to please. None of those steps is an issue for them at all. I don't condone buying out of China but that is a pretty sure fire way of squeezing the best quality guitar out of an otherwise shithouse marketplace. If you just order and wait, they are just going to pick one off the shelf, and that's not what you want. You need to push them to make your guitar.


As the name implies, RockJam is a guitar capable of giving you the best of rock sound and deep melody similar to the type you only get from the studio and stage. The RockJam RGEG02-BK ST Style Electric Guitar Super Packstands as the highest quality and most accessible full-size electric guitar kit of the modern era, a quality that still outstands many buyers till date.
Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]

At GuitarBassPro.com. ("GuitarBassPro"), we are committed to protecting the privacy of our customers and users of our web site located at www.GuitarBassPro.com (the "Site") . This privacy policy ("Privacy Policy") gives you details of our privacy practices, including (a) what information we collect about you when you use the Site; (b) how the information will be used or disclosed; and (c) your rights with respect to our collection and use of your data. We may modify these policies from time to time and will provide notice of any major changes by posting such notice on the Site.

Ironically, the sound of certain synthetic reverbs is now such an established part of music history that most convolution reverbs come with some IRs taken from existing hardware reverb units or from old mechanical reverb plates. Also, if you have a convolution reverb, it is worth checking the manufacturer's site, as additional IRs are frequently available for download.


Despite the numerous different analog devices, it is very rare for them to be able to duplicate all aspects of a Leslie speaker. Thus, Rotary Speaker Simulator are always going to be digital, utilizing modelling algorithms to model the relations between the rotating horns and bass baffle. And how the sound bounce around the cabinet. As Leslie also have an amplifier section, most of these typically have overdrives to simulate that aspect. Some of these pedals can even accept keyboard's input.
The term overdrive refers to when a tube amp is driven past its range to supply a clean tone. This is something we as guitar players have come to love and seek out. A common question is “what is the difference between overdrive, distortion, and fuzz as the terms have become interchangeable?” The short answer is not a lot, just one is more extreme as we go down the line.

ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Molla principale Vite di arresto Blocco tremolo Barra di arresto Con la chitarra accordata con precisione, regolare la molla principale assicurandosi che la barra di arresto tocchi il blocco tremolo e la vite di arresto. Se la barra di arresto non tocca il blocco tremolo e la vite di arresto, ruotare la vite di regolazione della molla principale finché...
Founded by the American Orville Gibson in 1902, Gibson is without a doubt the other legendary electric guitar brand. Their most famous model holds the name of the very popular guitarist Les Paul, who collaborated with Ted McCarty in its design back in the 1950's. Unlike the Telecaster and Stratocaster, the Les Paul boasts a mahogany body, a set mahogany neck, a rosewood fingerboard, and a maple top. Among the many Les Paul players we find Jimmy Page from Led Zeppelin:
I've had an Ovation Celebrity for over 5 years. Great action, wonderful sound with or without an amp. Stays in tune. Play anything from classical to rock. The Ovation can do it. The sound is unique, so making it your only guitar may not work if your in a band. If you're a beginner, the string tension is really low so it's easy on your fingers. It is a hollow body accoustic, but it plays like an electric. I've owned and still own several guitars. This is the one I reach for the most.
Ok so currently i run a Mesa 20/20 along with a GSP1101 and a MXR 10-Band EQ pedal. I love the MXR but would like to get a EQ in rack form. I see about a millon rack EQs out there but not sure which ones are made for guitar? They seem more focused on live sound/PA/Home recording..I am not sure if there all the same, Meaning a PA EQ will work for a guitar rack.
If you are not attracted to the way the guitar looks or feels in your hand, chances are you won't be too eager to pick it up every day. When you are just starting out, this is supremely important. Here's where a disclaimer needs to be placed. This isn't always the case, and often times people warm up to a guitar even if they didn't initially like it, but why chance it?
Description: Black Finish Model. Body: Alder - Body Construction: Solid - Top Wood: Alder - Neck Attachment: Bolt - Neck Wood: Maple - Neck Construction: C-Shape - Nut Width: 42mm - Fingerboard: Maple - Frets: 21, Jumbo, Medium - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - Guitar Features: Pickguard - String Instrument Finish: Black - Made In: Mexico
While it may not look like a classic amplifier, if you're into classic rock style tones for home use, the Yamaha THR10C is probably the amp that you really need. Ideally, we would all be rocking with big amps, but not all of us have the space or acoustically tuned rooms to let loose. And since we are using low volume amps more often, Yamaha designed their THR line to be the best in providing you with just that - low volume performance for jamming, practice or recording. The THR10C is part of this line, featuring the same 10W setup and stereo 3" speakers, but with tones that replicate the sound of classic amps. It also houses some essential effects which include reverb, delay, chorus and more. In addition to the usual clean to overdriven tones, Yamaha also equipped this unit with acoustic guitar amp and bass amp models, so you can directly play or record with those instruments. All these features are packed in a distinct and portable profile, and is powered either by the supplied AC adapter or via 8 x AA batteries.
Reverb pedals come with all kinds of different layouts. Even so, some of the controls are virtually universal. The first one we would like to mention is the dry/wet knob. This control is what you use to mix your original signal and the effect itself. When the knob is turned all the way to dry, there will be zero reverb present in the signal. As you move towards wet, the amount of reverb increases.
Pyle Pro’s PEGKT15SB package is the next step up. This guitar has more of a vintage feel thanks to its sunburst finish. Like the Silvertone above, it features 3 single coil pickups, two tone knobs, a tremolo bridge system, and a full-scale neck complete with a 22nd fret. Also included in the package is a Pyle Pro gig bag, a small 10-watt amp with cable, 3 guitar picks, a strap, and extra strings.

Is it not within the scope of eventual computational science to notate the performance aspect of playing the guitar? Sans keyboard, sans human hand - if not by bedroom producers with too much time on their hands, then by AI analysis and pattern matching logic produced by overfunded grad students spending their Silicon Valley parents' fortunes, their AI guitar-licks algorithms trained by analyzing performance records and accelerometer measurements of real virtuoso guitarists performing? Won't a well trained bot eventually turn out some licks that fall within the scope of enjoyable human performance habits?

For its tops (soundboards), Ovation used sitka spruce, a wood which Kaman engineers had been using in helicopter blades. In the 1970s, Ovation developed thinner sound-boards with carbon-based composites laminating a thin layer of birch, in its Adamas model, which has been viewed as one of the most radical designs in the history of acoustic guitars. The Adamas model dissipated the sound-hole of the traditional soundboard among 22 small sound-holes in the upper chamber of the guitar, yielding greater volume and further reducing feedback during amplification.[1] The Adamas design strengthened the sound-board, reducing the traditional design’s bracing and hence its weight. In the 1980s, another innovation was the introduction of shallow-bowl guitars, which appealed to electric guitarists.
Unlike Andrew, before Rocksmith 2014 Carl had never played anything other than a toy-guitar controller. The lessons made it easy to learn the basics—from just holding the instrument properly, to playing basic notes and fingering techniques—all without the pressure of a human guitar instructor's waning patience. Since this was my first experience playing a real guitar, I was eager to learn and didn't mind that the notes scroll horizontally across the screen instead of Guitar Hero and Rock Band's vertical scrolling.
The full-size electric guitars we tested are the Epiphone Les Paul SL, Ibanez GRGA120 Gio, Indio 66 Classic, Indio Retro DLX Quilted Maple, Jackson JS11 Dinky, Squier by Fender Affinity Series Jazzmaster, Squier by Fender HSS Bullet Strat, and Yamaha Pacifica PAC012. The short-scale guitars we tested are the Epiphone Les Paul Express, Ibanez GRGM21 Mikro, Jackson Dinky Minion JS1X, Jackson Rhoads Minion JS1X, and Squier by Fender Mini Strat.
These are the settings I use as my basic rack for adding rock guitar sounds in Cubase, and you might also find it handy as a point of departure, so it's worth saving as a track preset. To do this, right‑click in the audio track containing the 'rack', and choose 'Create Track Preset' from the context menu. When the Save Track Preset dialogue box appears, simply name it and save it: now you can call up your rack for any audio track in any Cubase project!

The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.

The actual value of the pot itself does not affect the input to output voltage ratio, but it does alter the peak frequency of the pickup. If you want a brighter sound from your pickups, use a pot with a larger total resistance. If you want a darker sound, use a smaller total resistance. In general, 250kΩ pots are used with single-coil pickups and 500kΩ pots are used with humbucking pickups.
Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches (18.4 cm). Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars' compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.
×