Launch price: $1,499 / £1,399 | Body: Ash | Neck: Maple | Scale: 25.5" | Fingerboard: Maple/rosewood | Frets: 22 | Pickups: 2x V-Mod Single-Coil Telecaster | Controls: Volume with treble-bleed, tone, 3-way selector switch | Hardware: 3-saddle, strings-through-body Tele bridge with compensated brass saddles, 6-screw mounting with removable modern 'Ashtray' bridge cover | Left-handed: Yes | Finish: Mystic Seafoam, 2-Color Sunburst, 3-Color Sunburst, Black, Butterscotch Blonde, Candy Apple Red, Crimson Red Transparent, Natural, Olympic White, Sonic Gray
The Jameson Left-Handed Black is an acoustic-electric guitar that comes with a slick appearance, a smooth body, and an impressive sound. With its thinline frame and cutaway design, this model is good for both amateurs and seasoned guitar players. You get a guitar that sounds just as awesome regardless if you’re playing it unplugged or through an amp.
Regardless of their investment potential or merit compared to Martins, Fenders and Gibsons, the fact remains that clean original Harmony and Kay guitars as well as some of the other interesting student-grade instruments of the 1960s and earlier are quite rare today. Since they were prone to structural problems, many were simply thrown away rather than being repaired. Due to the lack of good repairmen prior to the mid 1970s, attempts to repair such instruments were often as bad or worse than the original problems, further adding to the destruction. Since most of these instruments cost much less than a Martin, Gibson or Fender when new, owners often felt much less of an incentive to take good care of them. Back in the mid 1960s when I was starting out, I saw far more people playing Harmonys, Kays and Danelectos than Martins, Fenders and Gibsons, but for a variety of reasons most of these student instruments have not survived, so that today it is actually a rare occurrence for me to find an original Harmony Sovereign or a good Kay archtop in playable or good cosmetic and structural condition.
It looks like there was no information about Lyle guitars on google back in the day.Now you can find some info, but very little. I purchased my first guitar of my life age 14 from a seller on ebay for $100. I baught an awesome looking black SG style guitar with the name Lyle on it. Years later now, I know a lot more... Lyle is one of the rarest brands of guitar manufactured in the world. This rarety however does not increase the value of the instrument. Lyle is not a brand that can even be found in the guitar Pricing Guide. I have looked. The value is determined usualy by the seller. If your selling one, hit me up. Lyle was never associated with Gibson. Lyle was never purchased and closed down by Gibson. However, Lyle started manufacturing Gibson style guitars at a cheaper rate but they failed to observe copyright laws. Lyle was created by the Motsimoku Company in Japan from 1965 to 1970. In 1970 the Motsimoku Company was slapped with such high lawsuits by the Gibson Corp of the US, that they bankrupted and closed. Making Lyle one of the rarest brands of guitar because of their extreamely limited production life of 5 years.
Reverb's Free Online Price Guide: This specialty vintage guitar site is one of the largest, most carefully maintained used vintage guitar and bass shops on the internet. It sells hundreds of used guitars and basses of all makes and models. It offers a free online Price Guide where you simply type in the model of instrument you have, and Reverb will analyze its vast database of transactions and give you a large result filled with prices. This gives you a real-time look at the market and where your particular kind of instrument fits in. It is a living, breathing blue book, and (the best part) it is free.
Mikko, spot on. Even light wood has density, and there comes a point in solid body electric guitars where how dense any piece of wood is only makes a difference acoustically. The point you made about how a guitar feels when you're playing it is sound, though. Its weight and acoustic resonance will affect how you respond to it and how you attack it (same for neck thickness and profile), and that will account for the preference we have for one guitar over another of the same model.
As the name implies, RockJam is a guitar capable of giving you the best of rock sound and deep melody similar to the type you only get from the studio and stage. The RockJam RGEG02-BK ST Style Electric Guitar Super Packstands as the highest quality and most accessible full-size electric guitar kit of the modern era, a quality that still outstands many buyers till date.
Many musicians find it helpful to be able to plug in and amplify their acoustic guitar. So, how does an acoustic-electric guitar work? These guitars boast the addition of a pickup system inside the body that turns the vibrations of the soundboard into electronic signals. These signals can be weak, so most acoustic-electric guitars use a preamp to make them stronger.

If you’re a player performing live or in a studio, all of this is just the opening pre-credits sequence to your signal then being captured via a microphone, which then sends current through another cable to a mixing board, which then has its own preamplification, equalization and filtering, which either goes to the power amplifiers of a public address system or to some kind of recording device, which then involves…aw, I’m getting tired, and I think we’re getting the point: how can anyone call *any* of this “natural”? Does *any* of this occur in nature? Does any of this sound like we’re carving a flute from driftwood or clapping a couple empty coconut shells together?
80/20 Bronze strings are a mixture of Bronze and Zinc.  They are also referred to as Bronze/Brass strings and are extremely common, much like Phosphor Bronze.  One of the main differences is this variety produces a very bright tone that enhances articulation and pick attack.   This effect can be lost very quickly depending on how much the player sweats and how often they clean their strings.  This choice can be a little more demanding on the wallet, due to having to change them more often.
Any vibration we can hear as "sound" is composed of some distribution of overtones above the fundamental frequency. Overtones exist in a set fashion based on the physics of vibrating waves and the ratios between them. The only difference in tone between any instrument is caused by a different prominence and distribution of these overtones. When a string is plucked on an electric guitar the vibrations move into the body of the guitar as well. The resonant properties of the wood will cause some of these overtones to be "summed" and exaggerated while others will "cancel" to some degree. The vibrating string will be influenced, however slightly, by the vibration of the guitar, in turn changing the distribution of overtones on the vibrating string - essentially creating a feedback loop.
Modulation, in general electronics, means the altering of signal strength. In audio devices, modulation is a control feature that varies the strength of some effect over time to alter tonal properties. Some modulation effects mix ("modulate") an instrument's audio signal with a signal generated by the effect called a carrier wave.[70] Other modulation effects split an instrument's audio signal in two, altering one portion of the signal and mixing it with the unaltered portion.[71]
I played a hollowbody Ibanez almost exactly like this Artcore back when I was studying Jazz guitar in college. For the aspiring Jazz beginners out there, this is the guitar to start with if you’re wanting to stick closer to the “traditional” Jazz-type guitar without spending a fortune. However, make no mistake, this isn’t just a Jazz guitar. With 2 humbuckers you’ve got plenty of muscle for Blues, Rock, Rockabilly, etc.

The Jasmine S35 acoustic guitar has its share of criticisms, most notably its heavier strings and bargain basement appearance, but what keeps it popular with customers is the starter kit. Other entry-level acoustic guitars rarely include the accessories that the Jasmine S35 offers. It is also valued as a good back-up guitar for advanced players who want a dependable spare on hand during performances.
Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]
Fuzz Box World – We are dedicated to bringing the highest quality components to builders of guitar and bass effects. We want to be the number one source of parts for electronics diyers. Whether you are a professional boutique pedal builder or a weekend hobbyist, your business is very important to us. We will do everything we can to make sure you are happy with your experience at Fuzz Box World.
The 4000 series were the first Rickenbacker bass guitars, production beginning in 1957. The 4000 was followed by the very popular 4001 (in 1961), the 4002 (limited edition bass introduced in 1977), the 4008 (an eight-string model introduced in the mid-1970s), the 4003 (in 1979, replacing the 4001 entirely in 1986 and still in production in 2012), and most recently the 4004 series. There was also the 4005, a hollow-bodied bass guitar (discontinued in 1984); it did not resemble any of the other 4000 series basses, but rather the new style 360-370 guitars. The 4001S (introduced 1964) was basically a 4001 but with no binding and dot fingerboard inlays. It was exported to England as the RM1999. However, Paul McCartney received the very first 4001S (his unit was left-handed, and later modified to include a “zero fret“).
My 15 year old daughter recently renewed interest in the guitar she had bought a few years ago but had never really played much. She was disappointed when she noticed the strings were loose. We brought it here and Ted was so helpful and engaging. He recommended new guitar strings; normally you can buy the strings and do it yourself, or pay them to do it. He readily understood that while my daughter didn't know how to do it herself, she would like to know. He showed both my girls how to string a guitar, talking them through each step while he expertly strung the guitar and got it in perfect tune. Ted teaches guitar and his tutorial was an excellent recommendation of his teaching skills. He also threw in a cleaning cloth and gave us chocolates - how much better does it get than that?! We will definitely be coming back!
The EG-6N had a similar profile but tuners were mounted on a square-topped head with the buttons facing up. This had a dark square-ended fingerboard with dots and a single chrome-covered pickup with black center insert and exposed poles (same as on the SD-2L/4L), volume and tone control. The EG-8N was similar except for having a light fingerboard with black dots, and two of the chrome/black insert pickups, volume, tone and threeway select. A folding stand to hold the steels was available (this was a standard Teisco product from the mid-’50s on).
First, you need to determine what type of guitar you have - acoustic nylon, acoustic steel string, or electric. You want to be sure to use the correct strings for your particular guitar. Acoustic guitars that require nylon strings, such as classical, flamenco and some folk guitars, generally have lighter tops, or soundboards, with less internal bracing than those found on steel-string acoustics, and stand the risk of serious damage if fitted with steel strings. Steel-string acoustics are designed to withstand the added stress that steel strings exert on the top, bridge, nut and neck, and won't sound very good with nylon strings, if they even fit. Electric guitar strings must be made of ferromagnetic metals like steel and nickel, so they can interact with the magnetic pickups, while acoustic-electric guitars typically use a different type of pickup which senses vibrations from the bridge, so acoustic strings may just have a steel core wound with a phosphor bronze alloy wrap for bright tone. Guitars with whammy bars might require a few extra steps to keep everything stable, so check your manufacturer's instructions or look for online videos.
Instead of thinking about the different woods (mahogany, maple, rosewood, etc), all the different pickups, necks, scale lengths, bridges, body types… all you have to worry about is getting the STYLE right. 95% of the time, that will get you the SOUND you want as well. Of course, that being said, get the highest quality wood you can. For example, most players agree that a “solid sitka spruce top” is probably the highest quality wood you can get for a “beginner” level acoustic guitar, without compromising tone.
Harmoniser – a frequency-based effect that sounds like a second guitarist is playing in harmony with the original guitar signal. The effect is created by doubling the guitar input signal and then shifting the pitch of the double up or down at a certain interval (usually a 3rd, 5th or octave). The harmony effect is often used in the metal and hard rock genre to play solos.

Here we have a wonderful vintage 1971 Yamaha FG75 Nippon Gakki this one is from the famous Red Label series by Yamaha well know for Quality Marty like sound made affordable by Yamaha Japan over 45 years ago this guitar has well aged woods not the Faux aged “gassed pressed” high Tech way they are trying to re-create the naturally sweet aged tone that “Old aged instruments can provide “ This one was aged the old fashioned way over decades of time and as a result a surprisingly big sound is produced by this smaller bodied Grand concert like size of the Gibby LGO- but sounds even better for less dough …..Just in Excellent vintage 45+ year old Vintage Red Label Nippon Gakki FG75 .. this baby makes an excellent Parlor style guitar thats fun to play because of its real good play action, and it sounds great... JVGuitars upgraded to Martin bone Nut and compensated saddle and upgraded fancy bridge pins that improved its resonance too .... not a crack, plenty of patina with minor superficial nicks or scratches and such as seen absolutely but no structural damages ... this one plays very nicely and is ready to enjoy .... for a song contact Joe to buy at Joe's Vintage Guitars at: .
The plectrum, or flat pick, is another key piece of essential equipment. For electric guitars, it tends to be a thin piece of plastic, metal, shell or other material shaped like a teardrop or a triangle. There are also thumb picks mounted on rings and finger picks on the player's fingertips; you'll see electric guitarists using both of these as well as a standard pick. 
This style of volume effect rhythmically reduces and swells the volume of the signal in a regular cyclic fashion.  Often heard in Country and Western type guitar tracks, tremolo was commonly built into older amplifiers and is one of the earliest recorded effects.  The speed and depth of the effect is controlled on the pedal by way of one or two potentiometers.  When set to the tempo of a song, the player can produce an extra layer of rhythm on top of what is being played.
{ "thumbImageID": "Iron-Label-RGA-Series-RGAIX6FMT-Electric-Guitar-Transparent-Gray/J39264000001000", "defaultDisplayName": "Ibanez Iron Label RGA Series RGAIX6FMT Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Gray", "sku": "sku:site51500000013761", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,377.76", "priceVisibility": "1", "skuUrl": "/Ibanez/Iron-Label-RGA-Series-RGAIX6FMT-Electric-Guitar-Transparent-Gray-1500000013761.gc", "skuImageId": "Iron-Label-RGA-Series-RGAIX6FMT-Electric-Guitar-Transparent-Gray/J39264000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.

According to the official information Guitar Tricks has more than double the number of song lessons than any other guitar learning site. It goes on to say that there are more than 600 but I feel that the number could be even higher by now because new songs are added regularly. The songs available on Guitar Tricks are the ones that I want to learn, oldies and modern songs from major artists like The Beatles, The Rolling Stones, Eagles, Blink-182, Extreme, Good Charlotte and many more. Check out this list of Guitar Tricks Artists. Did I mention that lots of songs have a beginner and an advanced level lesson? I just love that the advanced level songs are taught based on the original arrangement and not some vague resemblance used to avoid copyright issues. This is because Guitar Tricks has licenses for teaching the original songs.
Jump up ^ DeCurtis, Anthony (1992). Present Tense: Rock & Roll and Culture (4. print. ed.). Durham, N.C.: Duke University Press. ISBN 0822312654. His first venture, the Phillips label, issued only one known release, and it was one of the loudest, most overdriven, and distorted guitar stomps ever recorded, "Boogie in the Park" by Memphis one-man-band Joe Hill Louis, who cranked his guitar while sitting and banging at a rudimentary drum kit.
List of electric guitar brands that include the most reliable models available. Electric guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best electric guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

if you wish to use your computer as an "effects pedal", I recommend IK Multimedia's Amplitube 3 - it has an extensive array of effects and amplifiers with all kinds of crazy and fun tones to mess around with. Theres a ton of effects, so I recommend you check it out. It is a bit pricey though ($199 for the standard edition). If I were you, I would download the Amplitube CustomShop, which is basically a free demo version of the full software.

With the PAC112V there is no harm going with the crowds. The Pacifica is a crowd-pleaser precisely because of its versatility – and so whilst it might have a very recognisable look, this electric gives you the opportunity to craft a sound that is entirely your own. The only drawback is its weight, which is not much of a drawback at all – particularly for this price.
Martin also developed a line of archtop instruments during the 1930s. Their design differed from Gibson and other archtops in a variety of respects–the fingerboard was glued to the top, rather than a floating extension of the neck, and the backs and sides were flat rosewood plates pressed into an arch rather than the more common carved figured maple. Martin archtops were not commercially successful[citation needed] and were withdrawn after several years. In spite of this, during the 1960s, David Bromberg had a Martin archtop converted to a flat-top guitar with exceptionally successful results, and as a result, Martin has recently begun issuing a David Bromberg model based on this conversion.
These are the most versatile 5 position switches around. They have 4 poles, each pole has one common and 5 switched terminal which makes a total of 24 terminals. With that many connections you can wire pretty much any pickup combination you can imagine. Poles are mounted on two wafers, two poles each. Common terminals are usually the outer two terminals on each wafer. Image below shows multipole switch, two poles on the front wafer are outlined with different colors.
That really depends on what you are going for. There are good arguments for before everything and right after the tuner, but also for after the distortion and before your modulation pedals. If you put yours right after the tuner in the front of your chain, you can equalize your guitar tone before it hits anything and adjust your pedals accordingly.

The best guitar I've found so far is my Westone Thunder 1a, from Matsumoku factory in Japan, 1982, which I got 2nd hand for £255. This has phase switching. coil split and an integrated preamp and EQ. It's got a 3 piece laminate neck with the centre strip at a right angle to the outer strips. It's got a brass bridge, nut, and knobs. It's 34 years old and the neck is as straight as an arrow. This guitar comes closest to having everything I could want in a guitar.

Distortion and overdrive circuits each 'clip' the signal before it reaches the main amplifier (clean boost circuits do not necessarily create 'clipping') as well as boost signals to levels that cause distortion to occur at the main amplifier's front end stage (by exceeding the ordinary input signal amplitude, thus overdriving the amplifier) Note : product names may not accurately reflect type of circuit involved - see above.[38]
"I've always thought that most people mic amps too closely," comments Alan Parsons. "They supposedly make up with an ambient mic, but I much prefer to find a mic position that works and process that, rather than mix in too much ambience." Despite Parsons' disapproval, though, a lot of the engineers I researched divulged that they use additional ambient mics to capture more of the sound of the room in which the guitar cab was recorded.
Five string guitars are common in Brazil, where they are known as guitarra baiana and are typically tuned in 5ths. Schecter Guitar Research produced a production model 5 string guitar called the Celloblaster in 1998.[43] A five-string tuning may be necessary in a pinch when a string breaks on a standard six-string (usually the high E) and no replacement is immediately available.
It was founded by Orville Gibson in 1902 as “The Gibson Mandolin-Guitar Mfg. Co., Ltd.” in Kalamazoo, Michigan.    Gibson is known for its innovation and supreme quality. Gibson’s Les Paul is very famous Guitar which creates the wildfire in the hearts of million fans. Gibson is always committed to provide the best quality with minimum disorder in all over the world. To enrich your experience the can prefer this wonderful Guitar.

It doesn't even seem to matter which kind of Guitar amp you have or when plugged into any PA system. This guitar is a keeper. it comes with Godin Nickel Strings which is why unplugged it may sound too tinny to some ears, but after changing to Elixer Acoustic Strings, it sounds much better unplugged and really shows off plugged in. It now can give my Acoustic six strings a real run for my attention. At gigs and open mics, people come up and ask,,,what the Heck is this Bruce? Looks and sounds amazing. My only wish is that it had the same Pick-up system as on my A6 Ultra, two separate Pick Ups and Controls and two 1/4 in outputs.
I'm going to assume that if you're reading this, you've probably been to two dozen guitar sites, all with varying, if not conflicting information on the correct way to do a setup. I've been there too, I've watched guys on youtube filing down frets with a dremel tool. Now it didn't look right to me, but maybe it works for him. The reality is there is more than one way to do something, and that's OK. If the end result is a great sounding instrument, it doesn't matter how you got there. So I'm going to show you my way of how to get to a great sounding electric guitar. And if you should choose to do something differently, and it works, great!!. Part of having some fun in life is experimenting, I encourage it.
Electronics installs are one of my favorite jobs here at the shop and this project was one of the funnest.  Installing a Clapton pre-amp is more then just a quick wiring job because of the surface mount board.  The board needs to be routed into the body underneath the pickguard.  Setting up the router is the most time consuming part of this job and once the routing in complete the actual wiring takes only a few minutes.  The guitar was then topped off with a fret level and setup. -Evan
A very, and in my opinion (from experience), the most difficult technique to learn and one of the most versatile. From simple single string transitions (a term I use to describe it I don't know the actual term) and used in jazz to quick shredding in rock. Learning this skill was not only a task, but helped me more fully understand a lot of musical theory.
Player-friendly features like a slim "C"-shaped maple neck give this guitar a slick, smooth feel, while the 12" fingerboard radius and jumbo frets are ideal for speed and effortless bends. The dual ceramic humbucking pickups boast hot output for powerful tones perfect for crunchy rhythms and soaring solos. Premium styling cues include chrome pickup covers and an eye-catching matching painted headstock to make this guitar stand out from any crowd.
that is not quite the reality since most are made in mexico or japan as they are of lower quality. You only meet those type of criterion when you buy a high handmade guitar which will be at least 1200 us or 1600 canadian. As you meet the entry level of solid wood prices better overall quality. It doesn't matter who makes the guitar : martin taylor, gibson, maton, collings, santa cruz, or even a high end a high high luthier like Olson, traugott or Ryan. The sound of the instrument and the perception that we have while we stroke a chord will define if we like the sound. We see how it feels, we look at a price that we feel comfortable with. Otherwise anyone would land a lowden, huss and dalton, bourgeois and the marquis version of Martin hd-28vs for instance. The personality of your style will infuence a lot of more then who makes it, because you buy the final product not the people who makes it.

3) Sound when not plugged in is surprisingly good for a little guitar. Of course, if you're expecting acoustic sound like a jumbo or parlor you will be disappointed because that's impossible for a 3/4 size guitar to match the acoustic sound of larger guitars. However, for a 3/4 size guitar in this price range, it's as good as it gets and I will put this little guitar up against any 3/4 for acoustic sound in this price range.
Most often, you will see effect pedals housed in small metal boxes on the floor at a guitarist’s feet. They are often called stompboxes because stepping on a metal button turns them on and off. Many effects boxes also include a foot pedal allowing the player to modulate the effect’s intensity or volume. Sometimes you will see a larger floor unit with multiple buttons and pedals. These are called multi-effects pedals or processors. They usually have a wide variety of different effects that can be engaged simultaneously. Multi-effects processors have grown enormously in popularity as their sounds and functionality have improved.
15 years ago a friend brought his in Miami i think. The guitar sounds amazing and the care for making it was awesome. The guitar have a cristal like sound and shines particulary well. Today i've acquire it from him by a fair trade: i purchased a new Falcon guitar, wich is the best brand here in Peru, and trade it for his Palmer. Is the best trade i've done. Not sure for him ;) My friend paid $100 for it 15 years ago and the model is PF20. Hope this information was helpfull
Ibanez Artcore AF75 Electric Guitar Another hollow body guitar to whet your appetite! The Ibanez Artcore AF75 isn’t as “old” as the other models here but it has earned a huge following because of its affordability, quality workmanship and versatile sound. Suitable for a variety of music styles, the Ibanez AF75 Artcore is also perfect for beginners eager to get started on a moderate budget.
In a band and got your slot to wail? Think about it. Shredding scales is all well and good but the best songs and solos have structure, tempo changes and memorable licks. It may be a cliché, but listen to Jimmy Page’s solo in Led Zeppelin’s “Stairway to Heaven” – now that’s how you build-up to a solo. It may be your time to shine, but don’t just gush everywhere – think about structure and let your solos build and breathe.

While modified four-stage phasers like the Uni-Vibe and other effects before it had sought to evoke a choral-like sound, the chorus pedal as we know it didn’t arrive until affordable short-delay chips became widely available in the late 1970s. This in itself implies that chorus is a type of delay, and indeed it is, but the sonic results of the ways in which these short delays are transformed lands the effect firmly in the modulation camp, so it’s easiest to consider it as such (the function of these delay chips will be explained in more detail in the Echo & Delay section down the road). IC-based chorus effects work in a manner very similar to flangers, detailed above. The main difference, put simply, is that the short delays used to create harmonically spaced notches and peaks in the frequency spectrum are manipulated to modulate more tightly above and below specific frequency ranges, rather than shifted to swoosh broadly up and down the entire spectrum. The result, and intention, is a sound like a group of singers or similar instruments, where some voices/strings inevitably waver slightly from those beside them, producing a quivering clash of harmonics that evokes space and dimension when used subtly. The effect is possibly best heard—as pure effect, at least—in stereo, and the nature of the beast lends itself readily to stereo outputs. The broad soundstage and Doppler-like movement a good stereo chorus can spread out before you between a pair of spaced amps or L-R headphones make it one of the most spacious, three-dimensional effects available, short of long delays or cavernous reverb settings.

The Jameson Left-Handed Black is an acoustic-electric guitar that comes with a slick appearance, a smooth body, and an impressive sound. With its thinline frame and cutaway design, this model is good for both amateurs and seasoned guitar players. You get a guitar that sounds just as awesome regardless if you’re playing it unplugged or through an amp.

It has been stated repeatedly that the CEO is a challenge, toxic whatever and yes, all of it is true. Many if not most people who take a management position here don't last a year. This is especially true at Corporate where at any given time half of the positions are open because employee turnover is off the charts and they are horrible at recruiting talent to get replacements hired. That's a really bad combination to have in a company. So the first question you have to ask yourself is: do you want to show a job that only lasted six to twelve months on your resume with a company that has a positive, almost cult like global brand image? Or another way, how will you explain your short tenure to the next company you interview with and make them believe you weren't the problem? When I was outside Nashville and told people I worked for Gibson 100% of them said "that's a great company" even though they had no clue. It's highly likely your next potential employer will think that way as well.

Although it’s a minor issue when choosing your first guitar, the tone and sustain that the guitar can produce relies on the quality of the material it’s made from. The most used tonewoods in the budget range are basswood, poplar, alder, and paulownia, while more expensive guitars can be made from pine, mahogany, and swamp ash. This is just a rough rule though – these days you will find mahogany in budget guitars and basswood in premium models. They all have different tonal qualities – for example, mahogany typically offers a warmer sound, swamp ash is brighter, while basswood and alder are well-balanced.
225 Parsons St, Kalamazoo, MI, 49007	1917–1984	Also located next to railroad tracks, this facility had major expansions in 1945, 1950, and 1960.[83] Various brands were produced there, including Gibson, Epiphone, (1957–1970)[84][85] and Kalamazoo. During the depression of the 1930s, children's toys were produced there, and during WW2 it produced materials to support the war effort in addition to producing guitars.[86] Between 1974 and 1984 Gibson moved its manufacturing out of this facility to Tennessee. Most of this move happened in 1974, leaving only acoustic and some semi-acoustic production for this plant.[87] In 1985, Heritage Guitars began production, renting part of this facility.[88]

Jazz guitarists learn to perform these chords over the range of different chord progressions used in jazz, such as the ubiquitous ii-V-I progression, the jazz-style blues progression (which, in contrast to a blues-style 12 bar progression, may have two or more chord changes per bar) the minor jazz-style blues form, the I-vi-ii-V based "rhythm changes" progression, and the variety of modulation-rich chord progressions used in jazz ballads, and jazz standards. Guitarists may also learn to use the chord types, strumming styles, and effects pedals (e.g., chorus effect or fuzzbox) used in 1970s-era jazz-Latin, jazz-funk, and jazz-rock fusion music.

Although early Les Paul imitations in the 1960s and 1970s, such as those made by Höfner, Hagström, Harmony Company and Greco Guitars differed from Gibson’s design, with different electronics, and even bolt-on necks, in the late 1970s some Japanese companies came very close to perfecting copies of the original 1958–60 Standards. These guitars later became known as “lawsuit” guitars. The lawsuit was brought by the Norlin Corporation, the parent company of Gibson guitars, in 1977, and was based on an Ibanez headstock design that had been discontinued by 1976. Ibanez settled out of court, and by 1978 had begun making guitars from their own designs.[citation needed]
But where do you start? What do all these different pedals do? In this guide we will give you a brief overview of what each different type of effect does so you can make sure you are looking for the right gear. If you're new to the pedal world, you might wanna check out our selection of best guitar pedals for beginners while you're here. And if you already have some pedals but want advice on which pedalboard to get, click here!

Fender’s open-back combo tube amps have been used on countless hit records in practically every genre of music in the past half-century. They can deliver both warm bell-like clean tones and gritty overdriven snarls. The Blue Junior III is a relatively inexpensive way to get into Fender tube amps, and it’s the perfect size for studio and small venues.
As a guitarist with a complete understanding of the vintage instruments he worked on, Novak wasn't completely comfortable with what any one instrument was capable of delivering. He wanted to combine all the features of his old favorites while adding design twists that would give him everything he was looking for in an electric guitar. This led to the invention of his patented fanned-fret fingerboard, which gives an instrument combined scale lengths.
The Ovation Guitar Company, a holding ofKaman Music Corporation, which itself is owned byFender Musical Instruments Corporation, is a guitarmanufacturing company based in New Hartford, Connecticut. Ovation primarily manufactures steel-string acoustic guitars. They have been credited with “by far the most significant developments in the design and construction of acoustic guitars” from the 1960s through the 1980s.[
The American Nashville B-Bender guitar is modeled after the personally customized instruments of some of Nashville’s top players, featuring a Fender/Parsons/Green B-Bender system, two American Tele single-coils (neck, bridge), a Texas Special Strat single-coil (middle) and five-way “Strat-O-Tele” pickup switching. Ideal for country bends and steel guitar glisses, this Tele is available only with a maple fingerboard.
There are a couple of tricks you can try. One is to get an allen key wrench that is SLIGHTLY too large and take a small file to it to taper all six sides slightly. The other trick, which I use sometimes on Stratocaster saddle height screws, is to use a suitably-sized Torx wrench. They're already tapered, and since they're six-sided-star shaped, they grip the corners really well, even if there's a bit of crud stuck in the screw.

Yes, he wears a KFC bucket on his head and a Michael Myers mask on his face, but he's a genius. Buckethead (real name Brian Carroll) plays every style, from country to death metal. Albums like 'Monsters and Robots' and 'Population Override' are must-haves for any aspiring guitarists, and instrumentals like 'Nottingham Lace' and 'Too Many Humans' take some beating. - Floods

Replace or upgrade your guitars volume and tone controls with the best quality pots available from CTS, Bourns, Fender, Alpha, Alps and more. From full size to mini pots, long shaft and short shaft pots, blend pots and stacked concentric pots, push/pull pots and more, we have the pot you need! Not sure which pot is right for your project? Then check out the Guitar Electronics FAQ Page for more info on pot values, pot tapers and more.
My first guitar was an acoustic guitar made by Ibanez. At the time I got it, I was very into the acoustic-oriented bands that were dominating adult rock radio at the time, the mid-90s. You know, bands like Hootie & The Blowfish, Blues Traveler, the Goo Goo Dolls and Barenaked Ladies, for example. So this was perfect for me. I could imitate some of my current favorite acoustic guitarists and learn to play the basic chord structures of their songs. But the itch to do more grew, and I was ready to branch out into the foreign, exotic, sexy world of electric guitars. I bought one of those starter pack guitars that come with an amp, some power cords, a strap, picks, a guitar case, some kind of instructional materials, and everything you needed to transform yourself into Jimi Hendrix in a matter of days or even moments. I was all set.

The truth is that I've never known what it's like to not want to play music of my own because I come from an Irish family that all played instruments. Luckily for me, my parents were very young when I was born -- they were like sixteen, seventeen -- and they were from a tradition of people playing instruments, accordions, pennywhistles, guitars, harmonicas and things like that -- cheap little instruments. But because they were young and moved over to Manchester, they liked rock and roll and pop music of the day.
So there you have it. An absolute workhorse with fantastic sounds, and just about a must-have pedal no matter what type of guitarist you are and no matter your skill level. Equally a perfect first pedal to buy as it is a perfect last pedal in your collection. The biggest downside is that it probably can’t be your only pedal, since you can only use one effect at the same time. Famous users include Russel Lissack of Bloc Party, James Edward Bagshaw of Temples, and Dave Knudson of Minus the Bear. At the “too good to be true” price that it sells for (seriously, we’re not just saying that, one of our writers immediately sold his DL4 and bought the M5), this is without a doubt the Best Bang for your Buck.
By the time After The Rain came out, the blues critics created enough of a backlash that it started affecting sales. Muddy must have realized that the records were upsetting his blues fanbase which had been loyal to him for over twenty years. Perhaps he feared he'd lose them forever if he stayed in this direction and that the young fanbase he had now might not stick with him as long. It wasn't until 1970 and after a more normal electric blues record (Fathers and Sons) that Muddy started talking badly about Electric Mud and then only mildly at first. Muddy released some great records in the rest of his lifetime, but he never experimented much with his music again.
Shop our selection of guitar and bass electronics parts and supplies. Everything you need to to finish your guitar electronics project like a pro. Volume and tone pots, pickup selectors and mini switches, jacks, tone capacitors, wire, solder, shielding and more. Get the full potential from your guitar's pickups with the finest quality guitar electronic parts from top manufacturers like: CTS, Bourns, Fender, Switchcraft, CRL, and more. 
Before being acquired by Gibson in 1957, Epiphone was one of the most popular guitar brands in the market. It competed with highly renowned guitar brands, including Gibson. These days, Epiphone is known for being a more affordable brand of Gibson guitars. They’re great for playing tunes from the 60s. Epiphone produce cost-effective versions or alternatives of Gibson Guitars. Many musicians claim that Epiphones were their first ever instrument. Epiphones tend to be very popular in the entry level market. Epiphones are great for people who are just starting and want a good brand name for their first guitar. So, if you’re looking for a cost effective entry level guitar, Epiphone would be your best choice.
What is the best guitar brand? That's subjective, and often based on a consumer's past experiences with a specific brand. This list includes a vast majority of the most recognizable guitar brand names that are currently on the market. This list includes those guitar brands that consumers might wish to learn more about, including electric and acoustic guitar types.
Distortion pedals is responsible for many of the sounds that you think of when you think ‘electric guitar.’ It’s absolutely classic, and you’ll find that the majority of effects are some flavor of distortion pedal. The results you can get from these stompboxes vary from overdrive-like breakup to smooth melodic power, so it’s important before you take one home that you check for the type of sounds that specific distortion pedal is designed to create. Doing your homework really pays off when it comes to distortion pedals.
Here is s very nice 1976 Takamine F375s from the laswsuit era with the Headstock shape and logo style font replica of a Martin D-35 Exotic Brazilian rosewood guitar from 1962, An amazing likeness in looks obviously and she sounds sooooo sweet the 40+ years since she was built back in 1976 at the time of this build it has been said that Takamine had used aged woods of at least 20 years aging prior to its construction... this guitar has been extremely well cared for and it has barely a few scratches that will be sort of hard to find, the structural integrity of this guitar is excellent its neck set is excellent as is its action is low and as a result this guitar plays amazingly with no buzz smooth action and a pleasure to play. Frets have been lightly dressed and are nice too. Neck width is 1-11/16ths at the nut with a medium profile it feels like an old Martin to just perfect. It has been set up with a Martin bone nut & saddles set as well as new Martin 80/20 strings set she sings loud and sweet a pleasure to play with rich encouraging tone. This guitar is straight as can be with no cracks or separation on its body or neck with the only exception being its Solid Sitka Spruce top has 2 fine hairline cracks in the top and they do not go threw to the back side and are insignificant and have been properly sealed and buffed and you can not see them until the closest inspection, they are not progressing and have been stabilized professionally years ago. Other that the hairlines you cant see its near mint otherwise overall condition give this a very good to -excellent vintage used condition rating and a great choice fot the lover of these great exotic Brazilian Rosewood guitars, Japan does offer these Exotic Jacaranda Brazilian rosewood bodied guitars today but note they do not come with the OLD school Martin Headstocks or the old style Script logo they have the modern headstock Takamine design and logo oh ya a $4500-6000 price tag as well. You will find that this beautiful Rare guitar is a Bargain priced gem and should be played tonight as it is Ready to tour or Record tonight! .
A Wiki is a web page that anyone can make changes to. The job of maintaining accurate information is far too monumental for one person, but a community of enthusiasts can maintain many thousands of pages quite easily, each person adding a bit at a time. That's the idea behind iGuide?s "What's It Worth Wiki". The most famous example of a Knowledge Wiki is Wikipedia, of course. But, our vision is that someday iGuide?will become the Wikipedia of Art, Antiques, Collectibles, Memorabilia....and Guitars.
The Fender Stratocaster Squier is possibly the most recognizable shape in electric guitar history. The Fender Stratocaster design is mimicked by manufacturers all over the world. Fender produces its own line of budget “Strats” called the Squier series. If you want to start with an electric guitar, chances are you’ll buy something like this for around $130 USD.

Finally moving over to the flipside, there is a certain issue with the amplifier which I’m not quite able to understand. Don’t get me wrong, it is a very good 10 Amp Amplifier from Hollinger, but somehow you get this buzzing noise when you set it in full volume. At a lower volume however, it sounds just fine. Even the distortion button works well, and helps you work up some pretty cool effects. All other accessories work fine, and aid your growth as a fresh learner.
1. striking the string creates the vibration and once it disrupts the magnetic field on the pickup that's it - how about when you don't strike the string at all, like when you tap on the body of the guitar? The vibrating wood imparts vibration on the strings, which in turn do their thing on the pickup. The body of the guitar, the nut, the bridge, every part of the guitar is now directly influencing the sound you hear out of the pickup. Remember, only the magnetic field disturbance is being amplified, and tapping the guitar has started the strings vibrating. How can that happen without the wood's tonal qualities affecting the waveform?
{"pageName":"[gc] vintage: kingston","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"martin","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Guitar Tuners lets you tune your guitar in seconds for free using a microphone so that you guarantee the perfect pitch of your instrument every time. Just play a note, and Guitar Tuners will display which note you''re playing, and how close you are to having that note in tune. The needle on this Guitar Tuner will turn blue you have an exact match. Just play each note on your guitar (E, A, D, G, B, E) or other musical instrument, and get in tune !

Then there's the issue of valves. Serious guitar players invariably prefer the sound of valve amplifiers to any form of solid-state circuitry, but the technical reasons are not as obvious as you might imagine. We all know that valves distort nicely when driven hard, but the use of output transformers also affects the sound. Then there's the choice of Class-A or Class-B (sometimes referred to as AB) power stages — Class-A stages clip asymmetrically whereas Class-B power stages tend to clip symmetrically. Even the make of valve has an effect, as do technical issues such as the choice of triode or pentode output valves, or even the types of capacitor used in the circuit. Because there are so many variables, not including the most important one (playing technique), the electric guitar is capable of a vast tonal range.
Bass cabinets are more likely to have thicker wood panels than regular electric guitar amps, and to have stronger internal bracing. These design features help to lessen the likelihood of unwanted cabinet buzzes or rattles, which are more likely with bass cabinets than electric guitar cabs because of the low-frequency sounds that bass cabs have to reproduce.
If you’re old enough and like whacky guitars, like me, you probably remember the great Guitar Player “Off the Wall” columns by Teisco Del Rey, the nom de plume of journalist Dan Forte. His was the first, and sometimes the only, story I’d read for a long time. Dan was perhaps the first to celebrate guitars whose names didn’t begin with M, G, or F. Dan usually worked the humor angle, but for those of us with an aesthetic eye, the guitars he featured became Holy Grails. One of the holiest of those was the 1968 Teisco May Queen guitar, a rare red version of which you see here!
Some of the best pedals in this segment, like the TC Electronic Sentry, will allow you to set both the volume threshold where the noise gate kicks in, and the type of interference you want to filter out. The important thing to remember about noise gate pedals is that they only eliminate hissing when you don’t play. As soon as you do, the pedal disengages and the noise comes back. With that said, noise gate pedals are essential for a good tone.
Unbelievable value for money with quality that is second to none The Joey series of electric guitars have been specifically designed for smaller hands, with 3/4 sized bodies and smaller 21.5" fret scale. They are a great sounding, fun guitar and come complete with a built-in tuner to make sounding good even easier. Awesome value as a part of Ashton's
The Gibson ES-335 certainly had an alluring appeal in the mid 1900’s, and it’s easy to see why. With a beautiful Arched top, lovely smooth curves and a tone that can knock your socks off, and a beautiful white binding, these truly are beautiful guitars. Whether you want to play some classic blues, or dip into some catchy jazz, this guitar is sure to impress.
Use the numbers on the tab to fret spaces on the neck. Unlike normal musical notation, guitar tabs don't tell you which notes to play. Instead, they tell you where to put your fingers. Numbers on the lines correspond to frets on the fretboard. Each number represents a specific fret on the line it's written on. For instance, a "1" on the bottom line means to fret the first fret of the lowest string and play that note.
With a growing popularity of the Les Paul guitars, hundreds of unendorsed imitations and copycat versions had appeared on the markets. However, due to the lack of U.S. legislation to address patent infringements and restrict the import sales, oversea imitations caused legal and financial problems to the Gibson Guitar Corporation. An also troublesome thing was the existence of high quality imitations of vintage Les Paul (and vintage Stratocaster) produced by oversea manufacturers.
I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.
The Effect: When it comes to effects pedals, those which offer more than one type of effect are usually seen as the best cost effective solution out there. Although many still prefer that standard, standalone configuration, multi-effects pedals have a lot to offer. Take Carl Martin Multi Effects Pedal as an example. This thing is packed to the brim with boutique level effects. Easy to use, a board such as this one can substitute a whole pedalboard depending on the variety of effects you use. One of the other great features of this design is the fact that multi-effect pedals come in both digital and analog form. They have transcended that artificial sounding performance that plagued effects processors some 10 years ago. Today, a multi-effects pedal is every bit as capable as its standalone counterparts. While this design is aimed at everyone, budget oriented users stand to gain the most from it.
Dave Murray: select alder body with a nitrocellulose lacquer finish, flat soft V-shaped maple neck with satin back, 21 medium-jumbo frets, American Vintage hardware and ahumbucker/single-coil/humbucker configuration – DiMarzio Super Distortion DP100 (bridge), American Vintage ’57/’62 (middle), DiMarzio PAF DP103 (neck) – with 3-way switching. Other features include chrome pickup bezels, synthetic bone nut and aged white plastic parts with black switch tip. Available in Black only and as a Japanese “Tribute” version with an original Floyd Rose locking vibrato system, dual DiMarzio Super Distortion DP100 humbucking pickups (Neck/Bridge) with a Fender Texas Special single-coil pickup (Middle), 3-way switching and an oval neck profile.

The EG-6N had a similar profile but tuners were mounted on a square-topped head with the buttons facing up. This had a dark square-ended fingerboard with dots and a single chrome-covered pickup with black center insert and exposed poles (same as on the SD-2L/4L), volume and tone control. The EG-8N was similar except for having a light fingerboard with black dots, and two of the chrome/black insert pickups, volume, tone and threeway select. A folding stand to hold the steels was available (this was a standard Teisco product from the mid-’50s on).
Here's a fresh one from the JVG Vault... vintage tone much like an old classic Martin Acoustic has some wear and has the "feel" just feels great in your hands and plays & sounds wonderful. Good volume and rich sounding lows and very nice.. condition rated at a solid 8.5 / 10 or better no cracks no repairs and plays nicely with original nut & saddle still in place , optional change nut & saddle & set up add $80.00. Please SEE MORE FULL SCREEN HIGH RES PICTURES HERE:
A 5 way selector is commonly found on guitars with 3 pickups , a humbucker in the bridge , single coil in the middle and a humbucker in the neck. So the 5 way selectors job is to select only one or more pickups at a time to offer different sounds on the guitar. The way the selector is pointed will tell you which pickup is selected and this is common on guitars from all brands. The bottom position is your bridge pickup which is closest to where the strings begin , the middle position is all 3 pickups and the top position closest to the neck is your guessed it neck pickup. The bridge pickup will offer heavier sounds if you play the right notes and the neck for soloing as the output (intensity) of the neck pickup isn't as powerful as the neck for a reason. The more you play the more you'll see uses for switching pickups on the selector. The tone knob on the other hand it depends on how you use it I know a lot of guys who are endorsed and so forth who never touch the tone knob or have guitars built without it , but used properly it can do a lot of stuff from Eric Clapton to Carlos Santana type stuff. you will also see a 5 way selector on guitars with two humbuckers this feature is called a mega or super switch depending on brand. It makes the pickups do different stuff but this feature is usually found on expensive guitars and keep in mind a 3 way blade switch looks like one but only goes in three positions. Bridge , middle and neck.

{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: multi effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"multi effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: multi effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
Enter the polyesters and the polyurethanes. These plastics can be made into synthetic resins which harden after application the guitar body, making them more durable than nitrocellulose finishes. In some cases, UV light can be used to initiate the curing process of the resin, making the finishing process much quicker than the application of nitrocellulose lacquer.
Set-ups include diagnostics, redressing and buffing frets, cleaning fret board, tightening hardware, restring, adjusting nut slots, truss rod adjustment, balancing tremolo, adjusting action, setting intonation, checking electronics, adjusting pick ups, detail and cleaning. Electro/acoustics get balance of output, and archtops have bridge located and taped.
I started playing & kinda grew up then (although my wife would dispute the 'grew up' part). We used to play mostly 9s or 10s. It depended on the quality of the neck on the guitar we could afford. A good guitar neck/fret job would let you go to the lighter 9s. You couldn't get all the great pedals then, so sustain was often achieved with some feedback, which is a product of TURNING UP the volume. Lighter strings seemed to feedback more easily. Lighter strings don't last as long as heavier ones, so unless you love re-stringing, 10s are a good compromise. I think Billy Gibbons still plays 8s, but he has a guitar tech that probably changes them for every show.
Bassists pairing an amplifier "head" of a certain wattage and a speaker cabinet (or speaker cabinets) with a certain wattage power-handling capacity may require advice from music store amplifier expert or an audio engineer. One of the reasons that many beginning bassists choose combo amps when they are starting is because with a combo amp, the manufacturer has ensured that the speaker and power amp are compatible from a power handling and impedance perspective. While there is a widespread belief that an amplifier with a rated wattage that is higher than the rated wattage on a speaker cabinet will harm the speaker, in fact, a clean, un-clipped power amplifier signal can be above the rated wattage of a speaker without damaging the speaker, as long as the power amp is sending out a clean, unclipped signal. There is a much higher risk of damaging a speaker when a clipped (unintentionally distorted) power amplifier signal is sent through it, even if the wattage is far below the rated wattage of a speaker. For example, a bassist could use a 700 watt power amp which is running with zero power amp clipping through a speaker cabinet rated at 500 watts without damaging the speaker; however, if a 100 watt power amp that is heavily clipping is plugged into the speaker cab, this could blow the speaker.
The smallest bass amps, which typically have 10 to 20 watts of power and a small 6.5" or 8" speaker, are known as practice amps. They amplify the instrument enough for individual practice in a small room, such as a bedroom. Practice amps do not typically produce enough volume or low-frequency sound reproduction to be used in a band rehearsal or show. As such, they are mostly used by beginners or, when used by professionals, for warm-up or individual practice. They are more likely than full-size combo amp cabinets to have an open-back design, like an electric guitar combo amp. The use of an open back cabinet in small practice amps makes these models different from most bass combo amps and speaker cabs, which are closed-back (often with bass reflex ports or vents, or less commonly, with passive radiator speakers, both of which are designed to boost the low-frequency response). Some buskers playing on the street for tips may use battery-powered practice amps, a feature available on some models.

Fender Super Champ X2 is a hybrid. Combining the organic sought after qualities of a valve driven amp and the dynamic technology of a modeling amp. This 15 watts combo amp with 1×10” inch speaker has two channels. Channel 1 is pure volume for the clean that starts to bite in every turn of the volume knob and modelling section that has a separate volume, gain and voicing control with 16 presets that includes the blackface, silverface, tweed, British combos and many more. The final section on the panel is shared by both channels, the EQ bass and treble, FX adjust, and FX select consisting of a delay, reverb, chorus, tremolo and vibratone.
electric guitar chords Acoustic guitar acoustic samples acoustic guitar loops Electric Guitar sounds Electric guitar Electric guitar loops Electric guitar samples Electric Guitar sounds guitar guitar loops Electric guitar samples drums drum loops dance dance music dance loops loops for music synth effects synth efx synthesizer sounds synth sounds synth loops synth samples digital synth digital synthesizer synthesizer synsthesizer sounds keyboard soundsSound loopsmu
CALIFORNIA PLAYER models express unique personal style with bold looks and inspiring sound. The satin finish mahogany neck features an easy-to-play, slim-taper “C”-shaped profile suitable for any playing style. When it’s time to plug in, solid-top California Player models also feature a Fishman pickup/preamp system for incredible amplified performance with pure, rich and resonant tone.
The Alvarez AG75CE is on the upper range of $500 acoustic guitars. This particular model is a cedar top with rosewood back and sides. It also features scalloped and forward shifted bracing which makes for a bigger sound. Owners of this guitar are posting rave reviews citing it’s quality of build and great tone. The cutaway is a nice feature for those that want to reach the upper register of the guitar, and it looks cool too! It is a grand auditorium body, which does not quite have the bass of a dreadnought but offers a more balanced sound. Great for singing along. This guitar is a great choice for intermediate players looking to not break the bank.Check it out here.
Similar to the previous model we mentioned, Squier by Fender Bullet Strat represents the Stratocaster beginner family. It’s a guitar full of tradeoffs, but you are rarely going to find a model more capable in this price range. I’ve played a lot of these, and even have one which I use strictly for practicing at home. I like it, even though it’s somewhat limited.
There’s still a lot of confusion over Japanese- and Korean-built guitars from this era in regards to trademarks, who built them, when they were offered, and the connection between them all. However, many of these guitars are high quality and you should always pay close attention when encountering an unknown trademark. If a guitar was produced at one of the aforementioned factories, it could very well be a treasure, just like your Lotus.
• Why fret ends get sharp: Sometimes the end of the fret wire can become sharp or, more accurately, protrusive at the sides of a guitar’s neck. Besides being rough on the hands, this is an indicator of a trickier problem: that the fingerboard has become dry and shrunk. This means that the guitar has been kept in an environment that lacks the proper humidity. More careful storage is the ultimate answer, but using lemon oil on the fretboard also helps prevent this from happening by moisturizing the wood.
{"pageName":"[gc] vintage: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
You’re probably not going to damage your laptop by plugging in a guitar. But take it easy. Instrument output is usually about 10dB louder than mic level and 10dB quieter than line level. But there’s a big variation between instruments, and of course, your guitar has a volume output. On an electric, it’s just an attenuator — there’s no active circuitry, the volume knob just knocks down the output of your pickups, some use it as creative control, some just to match a cheap amp better.
Splitting the humbucker #1: by grounding the coil-tap and connecting the hot lead to output we’re rendering the coil closer to ground useless because both of it’s leads are grounded. What we’re left with is the coil closer to the hot lead. Since we only have one coil, it will not be hum-cancelling on it’s own. It’s common to split a humbucker, so it can be wired with another coil in parallel, making the noiseless combination, especially on H-S-H guitars.
Distortion became more popular from the mid-1960s, when The Kinks guitarist Dave Davies produced distortion effects by connecting the already distorted output of one amplifier into the input of another. Later, most guitar amps were provided with preamplifier distortion controls, and "fuzz boxes" and other effects units were engineered to safely and reliably produce these sounds. In the 2000s, overdrive and distortion has become an integral part of many styles of electric guitar playing, ranging from blues rock to heavy metal and hardcore punk.
Epiphone also makes several less common models of the Les Paul such as the “Les Paul Goth”, “Les Paul Goldtop”, “Les Paul Ultra” and “Les Paul Ultra II”, “Les Paul Custom”, “Les Paul Black Beauty”, “Les Paul Prophecy Series”, “Zakk Wylde Custom Les Paul Model”, “Slash signature Les Paul Models”,the “Les Paul Studio”, and the most current, “Joe Bonamassa ’59 Gold Top Les Paul”.[27][28][29]
The company’s reputation and output continued to grow. Forays into mandolinmaking in the late 1890s and ukulele making in the 1920s greatly contributed to their expansion, and by 1928 they were making over 5000 instruments per year. The company remained family-owned and employed a relatively small number of highly trained craftsmen making instruments primarily by hand. By the early 1960s Martin guitars were back-ordered by as much as three years due to limited production capacity. In 1964, Martin opened a new plant that is still the primary Martin production facility.
And a heads up for anyone interested and if you're like me and somehow missed the fact that Line 6 is releasing a soft vst version of their Helix effects and amp sim package called Helix Native. I'm waiting on making a decision on updating my soft Amp/Fx packages until I see what it is like. If it's approaching anything like the hardware version(s) it should be great.
Wherever you play you're going to run into one of three sound setups: a full PA, a partial PA, or no PA capacity beyond vocal mics. The PA (Public Address system) is the primary sound system in any venue. A full PA has the board space and amplification capabilities to allow a sound engineer to apply a dedicated microphone to every instrument, amplifier, and drum head, as well as the cymbal spaces.
Looper pedal: A looper pedal or "phrase looper" allows a performer to record and later replay a phrase, riff or passage from a song. Loops can be created on the spot during a performance (live looping) or they can be pre-recorded. By using a looper pedal, a singer-guitarist in a one person band can play the backing chords (or riffs) to a song, loop them with the pedal, and then sing and do a guitar solo over the chords. Some units allow a performer to layer multiple loops, enabling the performer to create the effect of a full band.[87] The first loop effects were created with reel-to-reel tape using a tape loop. High-end boutique tape loop effects are still used by some studio producers who want a vintage sound. Digital loop effects recreate this effect using an electronic memory.[88]
In his informative, yet relaxed style, Sean takes us on a complete guitar recording journey starting at the vibrating strings and ending at the DAW. You'll first learn how to tune and prepare a guitar for recording. Next you're off to investigate the world of the electric guitar. You'll see microphones and mic placement techniques followed by a deep look at amplifiers and what to do when you're working with combos and stacks.
This model stands out from the rest due to its modified Explorer body shape. It’s one of the more affordable guitars with such an exotic design. However, it not only looks good but it also sounds good as well. There’s enough juice in those pups to make any amp scream. Explorers aren’t really my thing, but I can’t say that Jackson JS32T Kelly was bad when I played it. On the contrary, it’s actually quite good.
This. There's genuinely nothing good about it. It makes a Squier Starter Pack and a Daisy Rock look like a PRS Private Stock. Pretty sure the description isn't even true. An old roommate of mine had one and it was the worst guitar I have ever played in my life and I'm not just saying that. Very seldom do I say that a guitar is just plain terrible. Even with other guitar brands that I hate (like Squier) I'll say, "well, everyone has their own preference," but this guitar is just inexcusable.
As similar as the two instruments are, bass guitars have enough differences from electric guitars that bassists should definitely look for effects designed specifically for their instrument. By doing that, you’re getting a pedal balanced for the low-frequency dynamics of the bass, and built to help it blend better with the other instruments in the band. Many bass effects have the same purposes as guitar effects described above, including chorus, reverb, delay, phaser and tremolo.
The Vox Show Room shows the classic amps behind the British Explosion of sound in the 60's. VOX, at one time was one of the largest musical instrument producers in the world and their products were utilized by almost every major music group during the nineteen sixties. From The Shadows to The Beatles to U2, VOX is the "voice" of generations of musicians worldwide.
Filters are also great for use on drum loops. One trick I like is to send the drums to a modulated resonant filter set up as a send effect, with a narrow band-pass EQ beforehand. This creates a rather bizarre metallic melody that accompanies your drums. It can get fatiguing if over-used, but brought in at a low level in some sections of a song, it can create plenty of interest, particularly if followed by a modulated delay. Matt Houghton
One of the most important things when choosing your guitar is of course the sound - read the study on electric guitar sounds. It’s best if you’re able to try different guitars out in a music shop, and the staff there will most likely be happy to present you with different options that are good for beginners. There you will also have the chance to see how the different guitars feel to play, and have the opportunity to ask the staff if you have any questions or need any advice.
Fire Guitar Tuner tunes your guitar in seconds. This tuner tunes makes it easy to play in perfect pitch all the time and eliminates any need to buy those expensive microphone tuners at the music shop. Play a note, and this guitar tuner will display it. And once you''re in-tune, Fire Guitar Tuner will incinerate your mind as it lights ablaze in this Tuner''s fabulous glow animation. Why spend money on a guitar tuner when you can have one for free ?
The Professionals - just like the Standards before them - are designed to appeal to a wide range of players with a wide range of styles - which makes this Strat one of the best electric guitars available. The major difference between these new styles, however, is the new single-coil pickups. The basic premise lies in using different rod magnets for the treble and bass sides of the pickups from a choice of Alnico 2, 3 and 5. All the Strat pickups use 42 gauge Formvar wire and are calibrated for their positions, plus the centre pickup is RWRP so the parallel mixes are hum-cancelling. The new neck shape here isn't hugely different from the ubiquitous modern 'C' of the previous Standards; it's marginally deeper back- to-front with a subtly fuller shoulder. Plugging in, this is a modern, clean-voiced Strat that almost sounds like it's been 'produced' to maximise its Strat-i-ness. Where are you going to take it? We find ourselves driving in a slightly different way, pulling back the tones a little to lose some of that edge for rougher tones, while the treble bleed cap keeps things bright as we knock back the volume and hit the pop/funk button.
Unicord, a gear distributor in the early ‘60s working out of New York, was the first iteration of Univox. When it acquired the Amplifier Corporation of America, or ACA, sometime in the early-to-mid ‘60s, it began to market tube amps that carried the name “Univox.” However, there are no reference materials to be found – at least in the annals of the internet – that detail these earliest Univox amps.
For 70 over years, Kiesel Guitars has been building the highest quality guitars, basses, pickups, replacement necks, kits and accessories for pro and hobbyist musicians alike. We offer a complete lineup of instruments, including carved top guitars, multiscale fanned fret guitars & basses, MIDI synth access guitars, headless guitars & basses, extended-scale baritone guitars, acoustic/electric guitars and basses plus signature models from Jason Becker, Allan Holdsworth and more. Our Custom Shop builds instruments in the USA from the highest quality materials, at a direct price that can't be beat, along with build times of around 10 - 12 weeks. Hundreds of options, including exotic woods, inlays, fretwire, hardware, pickups & electronics and more allow you to order an instrument perfectly suited to your playing style and personal tastes. click for more...
Morris D-41 copy vintage 1980s Japanese high end hi class Exotic Brazilian Jacaranda Rosewood tone woods body it has detailed fancy inlay perfling and in in amazing condition. Here we are proud to present to you a Classic dreadnought high quality Guitar made of vintage aged tone woods with impeccable workmanship and top quality materials fit and finish rivals the best of the best. This guitar was made by the premier custom shop builders of Japan in the Terada factory and are well known for making Ibanez's top of the line series guitars like the Artists - musician- the George Benson line as well as many others Some of the great Aria's top of line guitars and a few other makers they have the great woods and skills to make some of the finest instruments made period and this Morris is one of them. Just have a good look and you'll see for yourself. One of the finest D-41 type guitars made She's approaching 40 years old and in superb vintage condition I'm looking for dings still and don't see them it's really in sweet condition WOW it's rare to find such fine examples like this all round nice I suspect this beauty will not last long. She is currently in our JVGuitars shop for a full set up and will receive a JVG-Martin upgrade which consists of new fit Martin bone nut & compensated saddle set a full fret dressing and polishing and a beautiful resonant set of solid ebony bridge pins with brass ring and inlaid Abalone detail as well as a new set of Martin 80/20 phosphorus bronze strings and a full body polish. Just in pics soon to come. To enquirer contact Joe: .
An octave pedal listens to what note you’re playing and adds the next octave up or down (depending on your settings) making it sound like someone is playing the octave note with you. If you’re familiar with guitar or just learning, you’ll know that an octave is the distance between one musical note and it’s corresponding note at a higher or lower pitch. For example, if you play an open E string and then play the E string on the 12th fret, it will sound the same, just an octave higher.
This is not a cheap Chinese manufactured kit of questionable quality where the parts simply don’t work together (like most of the other kits that you will find on Ebay, Etsy and Amazon). We proudly manufacture these kits in our shop in Portland, Oregon. We are a family-owned company building products and traditions that we expect to last for a long, long time. We produce instrument kits with exacting specifications, high quality production, and domestic, sustainably-cultivated sources of materials whenever possible.
In 1957, president Sydney Katz introduced the Gold “K” line of archtop and solid body electric guitars[14] to compete with major manufacturers like Fender, Gibson, and Gretsch. The gold “K” Line featured the Jazz Special, Artist, Pro, Upbeat,[18] Jazz II, and Jazz Special Bass. Gold “K” guitars used the same hardware as top manufacturers. However, there were truss rod and neck issues.[citation needed]
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: hohner","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"hohner","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
If you just start playing into a Windows PC, you’re going through a software construct called an audio device driver, through another software construct called the Windows Mixer, and finally into your recording program. If you then loop that back to play out so you can hear your guitar plus all effects, you again go from that DAW program to the Windows Mixer and to the device driver. That can take a really, really long time in music terms.
A common misconception of the Lyle brand, among others, was that Norlin sued Matsumoku for copying their designs and shut them down. The actual lawsuit was indeed filed by Norlin, only not against Matsumoku but Elger/Hoshino--the American division of Ibanez--over elements of the Les Paul and SG guitar designs that Norlin/Gibson had since claimed as a trademark. The case was eventually settled out of court. Japanese companies preemptively altered the designs of their guitars in such a way that they would not be "exact" copies of Gibson guitars. The true story of the demise of the Lyle brand is largely unknown to this day.

Wouldn't it be great if you could determine what price constitutes a "fair deal" before you made a deal? We think so. That's why we've created iGuide's Real Market Data (RMD) pricing, our proprietary system that does the research for you. It's a guide that gives you updated information on what you should pay for an item or what you should expect to receive - without having to spend hours researching. iGuide's Real Market Data pricing system is the internet's best guide to market value pricing and the only pricing system designed with the consumer in mind. Our exclusive RMD pricing is based on real sales data, gathered from auction sites in near real-time. This ensures you get the most accurate pricing available, as quickly as possible!
New from Stewart-MacDonald are guitar wiring kits with the premium brand pots, switches, jacks, capacitors and cloth wiring used in original Gibson Les Paul and SG guitars. The kits make it easy to order top-quality components for wiring or re-wiring a 4-control / 2-pickup guitar with a 3-way switch. The kit components include Switchcraft toggle […]
SWEET just in a famous Vintage Classic BOOMER Folks from Nippon Gakki RED LABEL 000 OM type Yamaha FG We have just done our JVGuitars set her up with our Martin Bone Nut & Compensated Saddle se as well as upgraded bridge Pins to solid Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic This guitar is AWESOME and is in BEAUTIFUL Condition! Classic Martin 000 OM style copy from Yamaha this guitar rings like a bell with excellent intonation. No Cracks no problemo like so many of these I see and just pass unlike the majority this guitar has excellent play action and is super fun to play! If your looking for a well aged ( almost 50 years ) just try to buy a 50 year old Martin $$$$$$$$$$$ WoW... This guitar is a Boomer surprisingly so but I have carried these FG110 Nippon Gakki's for decades now myself and was always impressed by the good one's... This one will impress you too.... at this price point its hard to beat this old Nippon Gakki Red Label 000. True Japanese Vintage guitar it top vintage condition as seen... Ready to purchase contact Joe at: Thank you for your interest in our quality Vintage Guitars, Joe Pics soon to come no worries its excellent!!!.
Every ZZ Top tour is a treat for guitar geeks, as Gibbons uses the occasions to unveil a six-string surprise. (Last year it was an elusive Gibson Moderne.) But what really makes Gibbons cool is a certain undefinable quality called “vibe.” Anyone who has ever met Billy and gotten to know him—however briefly—has an outrageous story to tell about the encounter.
The question here is how high to make the bridge. Well, this is personal choice. Find somewhere were the string doesn’t buzz on any fret from being too low, but low enough that you can play up and down the neck easily. There’s usually a sweet spot where you can just start to detect some buzzing and you can leave it just a tiny bit higher than that. Now do the exact same procedure for the high (thin) E string end of the bridge. Play the guitar a little bit to see if any of the other strings are buzzing. If, say, the A string is still buzzing, then raise up the end of the bridge nearest to that string a little bit ( a small amount of buzzing is often OK as long as it doesn't bother you too much and isn't heard through the amplifier - this a bit of a personal choice thing). OK, that’s step 2 finished. Your guitar should be nice and playable now. However, it may not seem to stay in tune very well. That’s because the intonation might be off.  
An excerpt: “Scorned, laughed at, jeered, chided, and derided. The concept of the solidbody electric guitar was subject to such utter disdain in some corners that it’s almost hard to believe it ever came to be at all. The ridicule and mockery would have been enough to send a less self-confident inventor running for the hills. Given our more than 55 years of perspective, though, we know it just had to be; a world without the solidbody guitar? Moreover, without the Gibson Les Paul? Unthinkable ...”

The earliest extant six-string guitar is believed to have been built in 1779 by Gaetano Vinaccia (1759 - after 1831) in Naples, Italy; however, the date on the label is a little ambiguous.[37][38] The Vinaccia family of luthiers is known for developing the mandolin. This guitar has been examined and does not show tell-tale signs of modifications from a double-course guitar.[39] The authenticity of guitars allegedly produced before the 1790s is often in question. This also corresponds to when Moretti's 6-string method appeared, in 1792.

The Takamine brand helps prevent big brand manufacturers from setting their prices too high - by showing them that great guitars can be produced at reasonable prices. On top of their bang per buck reputation, Takamine is considered as the pioneer of installing built-in pickups into acoustics, something that is now a common configuration offered by majority of guitar builders. The Takamine P3NY showcases how impressive tonewoods and electronics can be implemented without ridiculously jacking up the price.
With $500 in your pocket, buying a good amp becomes a lot easier. In fact, it’s probably as expensive as most casual guitarists would ever need to go. This category includes a big choice of both amp heads and combos, solid-state and tube amps. While they make great practice amps, they are all worthy of small to medium-sized gigs and studio recording. For example, you can find the excellent Peavey ValveKing II. This little amp head offers the same beastly tone as the iconic full-size 6505, with 20 watts of power and solid controls.
High-end solid-state amplifiers are less common, since many professional guitarists favor vacuum tubes.[citation needed] Some[who?] jazz guitarists favor the "cleaner" sound of solid-state amplifiers. Only a few solid-state amps have enduring attraction, such as the Roland Jazz Chorus.[15][16][17] Solid-state amplifiers vary in output power, functionality, size, price, and sound quality in a wide range, from practice amplifiers to combos suitable for gigging to professional models intended for session musicians who do studio recording work.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
So, how to use the tone knob? Open it to get a trebley sound, and roll it off to get a warmer, darker tone. Experiment. Some guitars sound best with the tiniest roll back on the tone knob, some songs require a certain combination of tone and pickup settings to sound best. Try to listen to the John Mayer DVD “Where the Light Is” and try to emulate the guitar tones there using only your pickup selector and knob. He uses different guitars and settings, but a lot of those can be emulated just with your guitar’s controls. Experiment.
An amplifier stack consists of an amplifier head atop a speaker cabinet—a head on top of one cabinet is commonly called a half stack, a head atop two cabinets a full stack. The cabinet that the head sits on often has an angled top in front, while the lower cabinet of a full stack has a straight front. The first version of the Marshall stack was an amp head on an 8×12 cabinet, meaning a single speaker cabinet containing eight 12" guitar speakers. After six of these cabinets were made, the cabinet arrangement was changed to an amp head on two 4×12 (four 12" speakers) cabinets to make the cabinets more transportable. Some touring metal and rock bands have used a large array of guitar speaker cabinets for their impressive appearance. Some of these arrangements include only the fronts of speaker cabinets mounted on a large frame.[25]
When two sine waves with frequencies A and B are ring-modulated, the output will also contain the frequencies A+B and B-A. If frequency B is not a multiple of A, these additional frequencies are inharmonic; e.g. ring-modulating sine waves at 1000Hz and 1250Hz will add the frequency 2250Hz, which is neither a multiple of 1000Hz, nor of 1250Hz. When more complex sounds are ring-modulated, sums and differences of all the harmonic frequencies are added.
More information on Ovation can be obtained from Walter Carter’s book, The History of the Ovation Guitar (Hal Leonard, ’96), although solidbody electrics are not the primary focus, and some inconsistencies exist between the text and the model tables (when in doubt, the text seems to be more reliable). Except for using Carter’s book to confirm some dates and a few details, most of the information presented here was gathered independently prior to publication of that book.
{ "name": "Jetty Black", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Jetty-Black-1500000152031.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "09-22-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152031", "shipToStore": true, "displaySku": "K47863000001000", "displayId": "1500000152031   POS #: 113861025", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Jetty Black", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Available Now" } , { "storeName" : "San Marcos", "storeStatus": "Available Now" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } ] }
I have a very unique Lyle guitar. It is apparently a 1972 but on the headstock it has the pearl from Gibson and it says Gibson on it as well on the headstock. It has the tail trapeze and the adjustable saddle. I recently had it set up and there is absolutely no fret buzz, it looks like it just came off the wall, stellar condition. My tech was stunned at the body condition and even the frets were like a new guitar? This is the only guitar I have seen that is definately a Lyle but it has Gibson, correctly done on the front of the headstock? I went in to the acoustic section and played a Gibson new hummingbird next to mine and it sounded cheap! I was stunned. I have no idea what this is worth but is like the perfect guitar. No dents, nicks, scratches, just and old guitar that has been babied, no warping anywhere, I think this will play another 30 years easy. If anyone knows about a Lyle with a Gibson logo and Gibson written on the headstock, please let me know
Well that and the effects, but Ample Sound even admits that the effects aren’t the greatest and recommends using another plugin for effects. Them admitting that might put a sour note on your tongue, but when you’re buying a VI in this price range, often it’s better to go for a plugin that is a master of a few components instead of one that attempts it all.

CALIFORNIA SPECIAL models mix no-compromise attitude with top-notch build quality and sound. Optimized bracing reduces mass for superior resonance, while the upgraded bone nut and saddle grant them exceptional sustain. Featuring all-solid construction, the fully-painted solid Sitka spruce top and matching 6-in-line headstock give the models a shot of electrifying attitude and unconventional Fender style that loves to be both seen and heard.
James Marshall "Jimi" Hendrix was an American guitarist, singer, and songwriter. Although his mainstream career spanned only four years, he is widely regarded as one of the most influential electric guitarists in the history of popular music, and one of the most celebrated musicians of the 20th century. The Rock and Roll Hall of Fame describes him as "arguably the greatest instrumentalist in the history of rock music". Born in Seattle, Washington, Hendrix began playing guitar at the age of 15. In 1961, he enlisted in the US Army; he was granted an honorable discharge the following year. Soon afterward, he moved to Clarksville, Tennessee, and began playing gigs on the chitlin' circuit, ...more on Wikipedia
Our 4 yr old grandson picked this guitar out and we purchased it for him as his Christmas present, he absolutely loves it. His dad has been teaching him to play it and he said that you can actually plug the guitar into his amp instead of the one that came with it. Our grandson will most certainly grow into this guitar and will get many hours of playtime with this guitar.
I haven't listened to all the amps on the list but found the Rivera Knucklehead blew away every Fender, Marshalla and Mesa in the shop when I was testing things out for the clean blues with a PRS. My daughter playfully plugged in a Gretsch baritone, cranked up the gain and Three Days Grace came screaming out with the finest quality. She agreed the Knucklehead was a win.

We considered more than 20 amps for this guide and gave the 10 most promising models a hands-on test. Our testing panel agreed that any of these amps would at least be good enough to get a beginner started, and that for reasons of personal taste, some players might prefer one of the ones we didn’t pick. Here are the others we tried, with a couple of notes about our panelists’ impressions.
The first of the easy guitar chords for beginners is E minor, followed by E major. Next you learn A minor and C major, all in the open position, which means the chords contain open strings and are played at the nut position. The next chord is D major, followed by A major. You will learn the B major chord, which is a barre chord with the root note on the A string. After this you learn the B7 open chord, which sounds really nice.
Guitar pickups are quite heavily affected by the impedance of whatever they're plugged into. If it's a low impedance input, you'll end up with a muddier, flatter sound going into your amp sims. Ideally you want a high impedance input, and if the 6i6 isn't doing it a cheap-ish D.I. box will be the thing to go for. Behringer's got some that get the job done.
Me got a Dorado resonator guitar, very nice dark walnut finish with white binding on edges. I bought it in 1985 but assume the guitar is mid-70's. Incidentally the neck has a very "japanese" feel to it. I was told by a guitar dealer that these particular instruments may have been ( at least partially) manufactured in Japan, then possibly had their resonators fitted in USA. They were DISTRIBUTED by Gretsch, in Europe at any rate. Mine is a nice guitar but not nearly as loud as most resonators.
Yea um John Mayers way misunderunstood and under rated, watch the 'where the light is live in LA' DVD(and actually watch it before you think of posting a reply) and tell me he aint an amazing guitarist, im not saying hes a god but hes definetly an amzing guitarist n i rekon he deserves a spot just for the fact that hes one of the few guitarists of this generation with some talent.

Sturdily constructed with a solid basswood body, bolted maple neck and rosewood fretboard, this black electric guitar has an attractive glossy finish. The list of add-ons include a high quality Hollinger BC-08 practice Amplifier (10 Amp), string-winder cable, strap, gig bag and pitch-pipe picks. The intonation as well as playability of the Davison full size electric guitar has been enhanced owing to its single, high quality humbucker pickup, chrome bridge system and diecast tuners. Last but not the least, the practice amp is suitably equipped with a headphones jack for noise-free practice sessions, as well as an overdrive mode for cool distortions!

James Burton, another famous Twin user, put it best: “If you can plug your guitar into an amp and make it sound good, that’s what it’s all about. The amp I really enjoy playing, especially when I’m traveling, is the Fender ’65 Twin Reverb. It’s got everything you need for live playing and it has great tone. That amp just works for me and it’s real trustworthy. When I travel on the road, I do use a little digital delay and maybe a little chorus, but I just like the sound of the guitar and playing something that I think people will appreciate and understand.”
Excellent condition Traveling Wilbury's solid body electric guitar. Each Gretsch TW-100T is unique in it's graphics. Featuring a solid maple neck and an ebony colored finger board w/ dot inlays and no fret wear. Fully adjustable "Strat-style" tremolo / bridge including whammy bar. One single coil pickup and a volume control. Only the most minor of wear to the finish.
This is because sound in an acoustic is dependent upon the bridge, saddle, and soundboard’s (top) ability to transfer string vibration through the sound hole of the body. The top (soundboard), back, and sides makes the body of the guitar where the sound hole is designed and cut. Knowing this, you’ll not only need wood that’s strong, but wood that can offer unique acoustic properties that emphasize its ability to project differing sounds at various frequencies. Of course, your choice of strings also lends to the harmonic ranges of a guitar.
In this guitar lesson you’re going to learn 7 of the most basic guitar chords for beginners. These beginning guitar chords are the first ones every guitar player should learn. They are sometimes referred to as open position chords, because they are played in the first few frets of the guitar and all contain at least one open string. If you are looking for easy guitar chords for beginners, these are the ones to start with.

More theory: tone knobs are basically adjustable resistors with certain values. The higher the value of your potentionmeter (hence “pots”), the more treble you allow to pass. This is why Fender guitars with their bright single coil pickups have 250K pots, while Gibsons with humbuckers have 300K to 500K pots. Some guitarists emply 1000K pots for maximum treble, and some make pots that when maxed out, make it seem to the circuit that it is not present, allowing all frequencies to pass through.

There are several good reasons why you might want to wire your Strat pickups in series. If you want more volume and midrange out of your pickups, the parallel/series switching may be the perfect option. As I mentioned, parallel wiring of two pickups is what you are used to hearing from a Strat. Parallel wiring adds transparency and clarity to the tone.
The Red Hot Chili Peppers always knew how to rock a party; it took John Frusciante to turn them into an arena-packing band with a sound they could call their own. Frusciante is a remarkably elastic stylist and a gifted sculptural arranger who pushed the Chilis to explore new worlds without getting in the way of their funk-pumped energy; he beefed up their sound with both well-placed fire (the volcanic, Hendrix-style solo on “Dani California”) and remarkable elegance (the indelible opening chords of “Under the Bridge”).
Trim:  Heel cap: ebony. Fingerboard: ebony bound in white celluloid with scalloped lower end; 24 frets under A and D, 21 nickel-silver frets under G and C; single abalone dots behind 5th, 7th, 9th, 10th (slightly larger), and 15th frets; double mother-of-pearl dots behind 12th fret. Nut: bone. Bridge: mahogany capped with ebony; nickel-silver-plated steel screws to adjust bridge height and pickup contact. Tuners: six nickel-plated steel, worm-gear machine tuners by Grover with convex head surfaces and decoratively cut plate outline. Endpin: black bakelite; extends through tailpiece. Pick guard: imitation tortoise shell plastic raised on wood brace affixed to top with two steel dome-headed screws. Lacquer: dark orange-brown sunburst.

{"product":{"id":"L20582","stock":"backorderable","price":"899.00","name":"Slash Firebird Limited-Edition Electric Guitar","download":false,"sku_id":"L20582000001000","checksum":"565047124900","rep_id":"site51500000000211665","displayId":"1500000000211665","sku_display_id":"1500000218333","sku_rep_id":"site51500000218333","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
The Marshall JMP Super Bass is a 100 watt amp. Lemmy, bassist/lead singer of Motörhead, used numerous of these amps to drive cabinets with four 12" speakers and others with four 15" speakers. His amps were labelled named “Killer,” “No Remorse,” and “Murder One".[5] The Peavey Mark IV is a large, solid-state amp providing 300 watts at 2 ohms; the Mark IV was known for its affordable price and its reliability.[6]
One of the things that initially surprised me was that coincident dual-mic techniques, where the two mics are placed as close as possible to each other to minimise phase cancellation between them, actually appear to be more commonly used than single-mic techniques. John Leckie explains: "There's an amazing difference in the sound and colouration you get from adjusting the balance of each of the mics, and you can get radically different textures depending on your mix of the two."

Paul Reed Smith is a relative newcomer having been born just 2 years after the Stratocaster was created, and founding PRS Guitars in 1985, but in that relatively short period of time PRS have made a huge impact on the guitar world, have been used by the likes of Carlos Santana, Ted Nugent, Dave Navarro. and Mark Tremonti, are now the 3rd biggest electric guitar manufacturer in the USA, and have earned their place among the best electric guitar brands.
Coming from Martin's Travel Series, the LX1E Little Martin has smaller proportions, with a total length of 34", body width of 12", shorter scale length of 23" and 1 11/16" nut width. While it can be a bit too small for some, it is easy to appreciate its impressive workmanship, bearing the same build quality and materials as found on their more expensive models. With the LX1E, you can own an affordable Martin guitar that has been proven to be a true workhorse instrument.
Rock music evolved from Blues, the music of the streets. Most musos’ of the 50s and 60s were poor and guitar amps made to a budget. Some but not all technical principles of amp designs were well thought out. Fender and Marshall were the dominant and most copied brands. The powerful amps had 4 output valves in parallel push-pull and gave approx 60 - 100Watts.
Dexter Holland (b. 1965) is the rhythm guitarist of punk rock band The Offspring and has played Ibanez guitars for most of the band's existence. He currently uses a custom diamond plate RG with a custom Jägermeister logo on the twelfth fret, as well as DiMarzio Super Distortion pickups, though he used to use a brown and green custom RG and has been seen with a custom Purple RG.
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones.
One of the most useful features of guitar-amp simulation plug-ins is that they can help mask some quite serious problems with whatever you're putting through them, without necessarily changing it beyond all recognition. I've found that even relatively clean settings can disguise such horrors as clipping on transients to a surprising extent. If you're ever faced with a badly recorded guitar part (even one that's played on an acoustic guitar, or through an amp), try putting it through an amp modeller.
Tube or solid-state? One has the nice warm vintage tone, but the other is just so much simpler and free of hassle. Vox make one of the best hybrid amps, which heats up your guitar signal with a proper 12AX7 tube in the preamp before it becomes amplified by conventional transistors to deliver up to 30 Watts. A warm tone with smooth overdrive, but without the aggravation.

I’ve been looking for a long time for information on what goes on inside a typical Strat-style 5-way switch, and this site helps me understand these switches a bit more. But I still have questions, though: 1)Why is it necessary to use jumpers from one lug to another? 2)As I understand it, a 5-way switch is 2 separate 4-lug switches wired together, each with 3 input lugs and presumably 1 output lug, OR are these lugs INPUT as well as OUTPUT lugs? (I get the impression that they are dedicated to either input or output, but looking at some wiring diagrams, it appears that inputs from pickups can come from either side of the switch.) 3) Is one side the INPUT side and the other the OUTPUT side, or are both sides of the switch mirror images of one another? In other words, must the signal from the pickup enter the switch at one side, and exit the switch at the other side? It seems I can only really understand how these switches work in terms of inputs (from the pickups) and outputs (to the output jack or volume pot). Without knowing whether a certain lug is acting as an input or an output, it can be hard to understand which way the signal is travelling.
Some combo amp and speaker cab manufacturers sell fitted amp or cab covers, to protect the equipment from dust and inclement weather. Professional touring bassists may place their amp heads, combo amps and speaker cabinets into foam-lined road cases to protect them during transportation. Rackmounted road cases typically have recessed handles on the sides for carrying the case. Touring professional bassists may have roadies who carry their amps and cabinet on and off stage.
Last but not least, we feel like it is important that we talk about a unit’s tonewood. As expected, it has been proven that the kind of wood that is used in the construction of one model can actively influence how that particular unit sounds. To put it shortly, the wood is the material that can help you define just how the model that you like sounds before testing it.

Though comfortable playing many styles, Atkins was most often associated with country music and the acoustic guitar. By using a combination of his fingers and a thumb pick, he created his signature “fingerpicking” sound—a style somewhat inspired by fellow guitarist Merle Travis. Atkins even recorded a duo album with Travis, as well as with other respected guitarist like Doc Watson, Les Paul, Jerry Reed and Mark Knopfler.
Another factor that may need to be considered is the length of the speaker cable. Very long speaker cable runs may affect the performance of the system, either by causing line loss of power or by affecting the impedance. For best performance and highest wattage output with bass stacks or combos with extension speakers, bassists typically use the shortest possible speaker cable.
The movie is very hauntingly beautiful, and it's especially highlighted by an awesomely haunting score, and some breathtaking visuals. The story is interesting, but it's definitely slow-paced, and the climax is much more of an intellectual payoff than a spectacular action scene (which many viewers might be hoping for). So I can definitely see why some people would hate this film, but I loved it. It's one I definitely won't forget anytime soon too, and it's great to see Natalie Portman (my old favorite actress) back in top form! watch movies online pro
Description: Body: Mahogany - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Carved - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Richlite (Paper/Phenolic Resin Composite) - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Resomax - Cutaway: Single - Hardware: Godin Tuner, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Seymour Duncan - Pickup Configuration: H-H - String Instrument Finish: High Gloss Cherryburst, Creme Brulee, Black, Burgundy
If you're a beginner, you'll love an option like the Yamaha RBX170 Bass or the Epiphone Thunderbird IV Bass. These bass guitars offer great tone and style all at a price you can easily afford. Best of all, their durable construction will withstand all the paces an eager learner will put them through. Maybe you're already an established player and are looking for a new challenge? If that's the case, you'll love the American Deluxe Jazz Bass V 5-String Electric Bass from Fender. This beautiful five string is loaded with updated electronics and Noiseless pickups for a tight low-end response you're definitely going to appreciate. Its alder body helps to give it a wonderfully clear tone that any bassist will want to hear every time they strap in. You'll also find acoustic basses in this section such as the EAB Acoustic-Electric Bass from Dean and the stunning A5 Ultra Bass Fretless SA 5-String Acoustic-Electric Bass Guitar from Godin. These basses are perfect for performers who demand the ultimate versatility. It won't matter where you're gigging with these gorgeous basses, you'll have the freedom to play them acoustic or plug in for a louder sound that can fill larger venues. The bass has always been an unsung hero in popular music, but that doesn't mean it doesn't play a crucial note. With any of the top quality basses available here, you'll have no trouble keeping the band in the groove and having them sound tighter than ever before.

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Mahogany - Nut Width: 42mm - Fingerboard: Rosewood - Frets: 24, Jumbo - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Earvana - Bridge Construction: Rosewood - Hardware: Chrome, Grover Tuners - Circuit Type: Active - String Instrument Finish: Brown Sunburst

Boost pedals increase the strength of your signal going in to your amplifier. This means you don’t have to use distortion to get that volume jump when you want to make the chorus or lead line jump out. A boost pedal increases the signal without adding distortion, and can be used to fatten up your sound, ‘pushing’ your amplifier harder and louder, just without the grit that a distortion pedal will add.
To build an electric guitar, start by cutting out the guitar body from a piece of wood like maple or swamp ash. Then, bolt a pre-made neck onto the body and attach the bridge. Next, install the pick-ups, volume control, and guitar cord. Finish by putting your strings on the guitar and testing out your instrument. If you want to make the process easier, you could try purchasing an electric guitar kit.
An overdrive is almost always at its best played through a tube amp set at medium to upper-medium volume, since the amp itself is doing a major part of the job, the pedal just being the boot that kicks its butt into juicy break-up a little quicker. Conversely, demo one DI’d into a mixing desk or portastudio as described earlier, and in most cases the breed sounds absolutely awful: harsh, raspy, cold, and artificial. It can be a shocking look at the evil side of that $350 vintage Tube Screamer you just bagged from eBay. Now stop crying, and plug it back into your AC30.
Your first step should be to think about what you’d really like to add to your sound. If you like the clean tones you get from your amp but can do without the buzzy onboard distortion, consider adding an overdrive or distortion pedal to your rig. If you’d prefer to experiment with chorus, a phaser or a pitch shifter, start there. There are no wrong answers when it comes to effects, and the units you choose and how you decide to use them are part of the creativity of playing guitar.
{ "thumbImageID": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "defaultDisplayName": "D'Angelico Excel Series EX-SS Semi-Hollowbody Electric Guitar with Black Hardware", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51438957997383", "price": "1,699.00", "regularPrice": "1,699.00", "msrpPrice": "2,629.99", "priceVisibility": "1", "skuUrl": "/DAngelico/Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black-1438957997383.gc", "skuImageId": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "brandName": "D'Angelico", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }