This is a solid body bass guitar that has a full deep sound. There is not much middle to it which makes it less defined than a lot of basses but it does suit some music very well. There is a choice of sample sets to choose from in this soundfont. Direct or through my j-station (which makes it sound more like its through an amp), or a mix of the two. The j-station samples are the same direct samples routed out and through the j-station and back in again, which is why it is possible to have a mix of the two. The J-Station samples make a distorted beefy bass sound which can be useful for some music i.e. 3 piece bands where tha bass fills out instead of a rhythm guitar or just for a more lo-fi bass sound. The direct samples are not so distorted and can be used in alot more styles of music. There is a preset that includes slaps and slides etc to help add some realism.
Collings Guitars is an Austin, Texas based stringed instrument manufacturer. The company was founded in 1973 by Bill Collings who is “one of the most recognized and respected names amongst aficionados of modern acoustic instruments.”[ Their acoustic guitars have been highly regarded for decades.[2]In addition to acoustic guitars they also make electric guitars, archtop guitars,mandolins, and ukuleles.
I liked that the test used identical setups and that the results were captured on a high resolution display. Often the debunkers use either their ears alone (and in a MP3 format as well for us to compare) or an oscilloscope which is a terrible measuring device for real sound because it can only display time and amplitude where the amplitude is a summed view of all the frequencies at the same time. The FFT clearly showed much much more.
The neck wood is used for the headstock and for the back of the neck (where your thumb rests when playing the instrument). Be careful not to confuse the neck wood with the fretboard wood, as they are separate and different. All our necks are handcrafted from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.

Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.

Yamaha F-310 Acoustic Dreadnought guitar in very good-excellent used condition no cracks or issues it looks great and the neck angle is excellent as well so as a result this guitar plays well with good fingerboard action with plenty of room on the saddle to lower action even more in future years if ever needed. Frets look good at 90-% with no ruts on fingerboard noted, truss rod is working fine, nut is 1-11/16ths. Yamaha specs (all of the F310 are made like this). It has 20 frets and a slim taper neck,The top is spruce, laminated, with natural finish. The sides and back are made of Meranti Indonesian Mahogany type wood , fingerboard and bridge are made Indian Rosewood, and the neck is of Nato. It's a full dreadnought guitar style, and just looks great.this one is in exceptional used condition better than average. Sound is good with nice volume and its tone is getting mature,,nice tone. No Cracks no issues no repairs and looks to have a bone nut and saddle this helps it have such a mature natural tone, Its sounds better than other F310’s Ive played I like this guitar and its price is right. any questions or to buy this guitar contact Joe at: .
This category of effects pedals does what the name implies.  It tweaks the volume of your guitar signal in some fashion.  These typically come in this spot in the pedal chain (after everything but the time-based effects) so that any change to your volume is already receiving the effects of all the pedals before it.  You’ll be altering your entire signal minus delays and reverbs.
In the event it does not work out, the next measure is to utilize automotive fine grade sand paper to decontaminate contact points. Once more, cover this around a Q-tip for jack inputs and replicate the contact cleaner procedure. By now, you should have confirmed any likelihood that the problem is caused by a cleanliness issue. All your equipment should be fresh and clean for your upcoming performance.
If you like the traditional look of a Fender Stratocaster, but want something a bit more modern with a little more output for heavier blues, rock, and metal tones, the ESP LTD SN-200HT is a fantastic value for the money. You’ll get a great range of tones thanks to the humbucker in the bridge position, and two single coils in the middle and neck positions.
The guitar is an instrument capable of truly heavenly tones but capturing this sound in a recording is never as straight-forward as you'd think. Here at Prime Loops we've been changing strings, tweaking amps and adjusting mics to deliver only the finest tone imaginable to your DAW! We used a 1985 Gibson Les Paul electric and a Martin DC-16RGTE acoustic with Fishman, Marshall and Orange amps, recorded through an AKG C214 microphone, so STUDIO GUITARS guarantees to make the hairs on the back of your neck stand on end!
It starts off with a chambered basswood body with an arched maple top, that follows the Pro Jet single cutaway shape. Because of the semi-hollow body, it is lighter on your shoulder and on the ears, and many notice that it emphasizes the high frequencies a bit more. Playability is also light, thanks to this guitar's shorter 24.6" scale length. The maple neck is topped by a 22-fret rosewood fretboard with a standard 1.6875" wide nut. Giving this guitar its biting tone are two Blacktop Filter'Tron Humbuckers.
The positions (that is where on the fretboard the first finger of the left hand is placed) are also not systematically indicated, but when they are (mostly in the case of the execution of barrés) these are indicated with Roman numerals from the first position I (index finger of the left hand placed on the 1st fret: F-B flat-E flat-A flat-C-F) to the twelfth position XII (the index finger of the left hand placed on the 12th fret: E-A-D-G-B-E; the 12th fret is placed where the body begins) or even higher up to position XIX (the classical guitar most often having 19 frets, with the 19th fret being most often split and not being usable to fret the 3rd and 4th strings).
My interests are in the Kents with the script logo on the headstock, body, and pickups. The headstock is Gibson-ish with tuners on both sides. The pickup nearest the neck is tilted, regardless of how many pickups are on the guitar. One model, the 742 has four pickups with switches, volume and tone knobs for each. Overkill, to say the least, and I have read somewhere that they don’t sound very good. However, I have seen some youtube video where a 742 sounds pretty good in live performance. A lot of the sound comes from a proper setup and the hands of a skilled player. Hopefully I’ll be able to find out for myself someday. Regardless, the 742 is one funky-looking guitar.
It's the perfect guitar ... for someone else!  So your buddy just gave you his 7-string death avenger before heading off to college cuz he knew you wanted to learn to play.  Nice, but what he did NOT know is that you hope to be the next string-bending Tele-twangin' Brad Paisley.  It ain't EVER gonna happen with you wielding the death-star, sell her to a metal head and getcha that Tele!
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
The “fatter wire = fatter tone” equation is nothing new. Ever since jumbo frets have been available, many great players—Rory Gallagher, Stevie Ray Vaughan, Kenny Wayne Shepherd— have been known to re-fret their Fender Stratocasters in particular with jumbo wire (vintage-spec Strats arguably provide a more dramatic before and- after picture than some other guitars, since they were born with narrow frets). More metal in any fixed component usually means a greater vibrational coupling between string and wood, so there is presumably something to this theory. But what else changes with fret size?
Samick is a South Korean based musical instrument manufacturer, which was founded in 1958 by Hyo Ick Lee, with the goal of "enriching human life through music, the universal language". By the mid-1990s, they were the single largest guitar manufacturer in the world! Because they build under contract for many famous brand names, more likely than not, you've already played one of their guitars.
Acurious phenomenon that ac-companies certain guitar compa-nies is an inability to translate success from one medium to another. For instance, Martin has never been able to transfer its reputation for high-quality acoustics to electric guitars. And Fender has never been able, on its own, to really succeed in marketing acoustic guitars. Instead, it purchased Guild.

Although much less common, the second trick I have in store for you shouldn't be taken lightly. The idea is to double a more or less distorted guitar part with an acoustic recording of the strings of your electric guitar recorded simultaneously as the distorted part. As preposterous as it sounds at first, considering that the sound of an electric guitar without an amp is certainly not the most pleasant one, the overall result can be truly amazing! Indeed, well managed, this screeching sound has the particularity of adding a bit more dynamic relief to "trashy" sounds, providing the performance a more "organic" aspect, especially due to the accents produced by the pick. But just like with the first trick, you need to sub-mix this take wisely so that the listener doesn't end up discovering the trick.
Worked fine. The product is as advertised. The solder joints looked prfessional, the wiring was neat. I'd say you wouldn't want to put this in a boutique level guitar but if you have a cheaper guitar that needs new electronics, these'll do the job fine. you won't find a cheaper wiring harness but you need to keep in mind that you're getting what you pay for. If you want a top quality harness, you'll pay at least 3 times as much.
The LGXT comes with 2 Seymour Duncan custom humbucker pickups that give it a classic electric guitar sound. The piezo pickup with custom preamp EQ makes it sound very much like an acoustic guitar. With the built-in synth pickup you can get just about any sound you want via a Roland GR series synth. It has a silver leaf maple solid body with a figured maple top and a mahogany neck with a richlite fingerboard on top which Godin says makes the action even better when using a synth. It has a full 25.5" scale length and 1.6875" nut width.
: Palmer is a U.S.A. company based in Miami, FL. They contract out the building of cheap guitars to China and such; while reserving the high end, high priced guitars for those made in the states (like most guitar makers today). I had one that had a broken head stock. I paid $50 for it, just as a camp guitar. It sounded fair, but I could tell it was made cheap. I'd compare them to a cheap Cort, Mitchell, or Fender.
The first to go are the ultra-highs, and the lower the value of the pot, the greater the amount of signal that can escape to ground. This is why 500K pots keep your sound brighter than 250K: their higher resistance won't allow as much of the signal to bleed off. And a 1Meg-ohm pot has such high resistance that when wide open it sounds almost like having no control pot there at all.
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Sitka Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Nut Width: 45mm - Fingerboard: Rosewood - Frets: 20 - # of Strings: 6 - Scale Length: 25.4" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Antique Blonde
Thanks for reading the fine print. About the Wiki: We don't accept sponsorships, free goods, samples, promotional products, or other benefits from any of the product brands featured on this page, except in cases where those brands are manufactured by the retailer to which we are linking. For our full ranking methodology, please read about us, linked below. The Wiki is a participant in associate programs from Amazon, Walmart, Ebay, Target, and others, and may earn advertising fees when you use our links to these websites. These fees will not increase your purchase price, which will be the same as any direct visitor to the merchant’s website. If you believe that your product should be included in this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.
Gitar Tricks are listening (see quote in bold) and as a result I have upgraded my Review Rating of this awesome Online Guitar Training Program. My previous review highlighted problems with the Video Loop Feature and the lack of Speed Control I am so happy that Guitar Tricks have released an immensely improved Video Player with faster video loading time, more accurate and reliable A/B looping and added a Video Timeline Preview that displays thumbnail images of the video at various points as you hover over the timeline. Another feature of the new player is the ability to adjust the speed via the Slow Motion feature.
But in general, there's nothing wrong with Decca electric guitars, especially for indie musicians today who are looking for a vintage guitar with some character to it. Since most vintage guitar fans have seen every model that Gibson, Fender, et al, have ever made, many of the Japanese guitars of the '60s have a fresh look that stands out from the crowds. In 20 years, the M-i-J electric guitars of the '60s are going to be worth 4 or 5 times what they sell for now, and smart collectors who either can't afford Fenders, Gibsons and their ilk from that period, or who are interested in something more unusual, are already snapping them up.
Ovation backed off from its more exotic design directions and in ’77 introduced two more conservative models, the Preacher and the Viper, and its first solidbody basses, the Magnum I and II. The Preacher featured two equal cutaways, whereas the Viper sported more of a Les-Paul-style single cutaway, though neither would never be confused with a Gibson equivalent. Their shape was, in fact, essentially a downsized version of the Ovation acoustic outline. The Magnum shape was derived from the earlier Breadwinner and Deacon, with more contouring.
Depending on whether you play rhythm or lead guitar, you will want more or less treble cut. One of the secrets to a two guitar band lies in the tonal differences achieved between the guitars that stop them from bleeding together. Part of this is inherent in the different instruments and amps used by the two guitarists (humbucker vs single-coil pckups being the greatest differentiator imo, as well as discerning use of the pick-up selector switch), but the contrast must also be attended to on the fly, and here the tone knob, along with the useful volume knob help the two guitarists from stepping on each other’s tonal feet while mixing their notes together.
You have 16 different modulation effects including chorus and flange, 12 overdrive/distortion effects including high gain monsters and smooth creamy overdrives, 14 mono and stereo delays and reverbs and 22 amp models including tube and solid state amps from Fender, Marshall, Orange, Diezel, and mesa Boogie. It’s safe to say, you’ll find it hard to get bored of this thing!
While many individuals who want to become guitar technicians dream of working with big-name bands, it is more realistic to work with smaller bands first to gain experience. Local bands often need extra help with many of the technical aspects of show production. Techs may be asked to perform other tasks besides guitar maintenance, such as stage set-up and breakdown, driving the tour bus and selling merchandise. All of these activities can provide techs with invaluable knowledge regarding staging live performances.

Due to the acoustic, aesthetic and processing properties (workability, finishing, joints) the wood and the ligno-cellulose composites are the most valued materials for the musical instruments' construction. The guitar is made up of a complex structure, formed by a vertical wall in a curve shape (technologically named "sides") and two faces made up of ligno-cellulose plates, so that it should... [Show full abstract]

Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
Next we look at the features and hardware of the guitar. What brand are the pickups? Is the bridge fixed or is there a tremolo system? Is there a locking nut or anything else to help with tuning stability? Does it come with a case? We also take this opportunity to look at any special features that define the guitar – perhaps a bridge that never goes out of tune, or a control switch that makes the guitar do crazy things.
The Science of Electric Guitars and Guitar Electronics considers the electric guitar and related accessories from a scientific point of view. The majority of books about electric guitars try to avoid using mathematics when describing the scientific phenomena related to the electric guitar. However, mathematics is an invaluable tool in the design processes of all areas of technology, even when designing musical instruments and audio electronics. This book presents simple mathematical methods for modelling the electric guitar as a signal source for electric circuits such as effect pedals and amplifiers. In addition to modelling the electronics inside the electric guitar, the principles of operation of some vintage guitar effects and amplifier circuits are explained and analysed using systematic methods of circuit analysis. The book is intended for everyone who is interested in the design and analysis of basic analogue electronics used in the electric guitar and guitar-related accessories. The presented topics cover the whole signal chain from the guitar strings to the loudspeaker. Therefore, a solid foundation is established for creating own designs in guitar electronics using basic components of analogue electronics.
Bass effects are electronic effects units that are designed for use with the low pitches created by an electric bass or for an upright bass used with a bass amp or PA system. Two examples of bass effects are fuzz bass and bass chorus. Some bass amplifiers have built-in effects, such as overdrive or chorus. Upright bassists in jazz, folk, blues and similar genres may use a bass preamplifier, a small electronic device that matches the impedance between the piezoelectric pickup and the amp or PA system. Bass preamps also allow for the gain of the signal to be boosted or cut. Some models also offer equalization controls, a compressor, and a DI box connection.
As someone else mentioned, it depends if this will just be a practice amp, or if it will be used to jam with others. Personally, I think a beginner should just get a small practice amp, but a good one. The reason is that you don't yet know what you will want tone-wise out of a gigging/jamming amp yet. So just get the best solid state modeling amp you can afford and worry about a bigger amp later.
Here you will find a selection of our most popular brands of acoustic guitars. This range includes Australian manufacturers Maton and Cole Clark, prestigious American companies C.F. Martin and Gretsch as well as fantastic value for money in Fender, Yamaha and Epiphone. We stock guitars ranging from beginner to professional, with and without pickups and in all different shapes, sizes and finishes.
YouTube has become well known for its tutorial videos and how-to clips on every subject on the planet and guitar lessons are no exception. Videos don’t provide the same kind of interactivity as our Uberchord app, which can listen through your device’s microphone and give you instant feedback on your playing. But we agree that YouTube clips can let you actually see and hear what’s going on—it can make a difference when things get confusing.
4. Vox VT40X 40-watt 1x10 Combo Amp ($249.99): The Vox is another modeling combo that utilizes a Valvetronix tube preamp to give you the sound qualities of a tube amp. With 13 onboard effects, you can channel quality effects without having a pedalboard at your disposal. Vox’s Virtual Elements Technology has allowed them to carefully recreate up to 20 realistic models of very sought-after amp tones, all within an attractive looking package.
James Marshall "Jimi" Hendrix was an American guitarist, singer, and songwriter. Although his mainstream career spanned only four years, he is widely regarded as one of the most influential electric guitarists in the history of popular music, and one of the most celebrated musicians of the 20th century. The Rock and Roll Hall of Fame describes him as "arguably the greatest instrumentalist in the history of rock music". Born in Seattle, Washington, Hendrix began playing guitar at the age of 15. In 1961, he enlisted in the US Army; he was granted an honorable discharge the following year. Soon afterward, he moved to Clarksville, Tennessee, and began playing gigs on the chitlin' circuit, ...more on Wikipedia

Budget acoustics usually have a very high action (which may be possible for a good luthier to fix!), barre chords on acoustic guitar can be demanding and require good finger strength on a well set up guitar, on a budget thing with a high action it will be next to impossible! Cheaper acoustic guitars can be very hard to play higher up the fretboard because the strings are too far from the fretboard - if you find this, the truss rod (a thing inside the neck that controls how 'level' the neck is) can be adjusted by someone who knows what they're doing! If you can stretch to a mid-priced acoustic you should be able to get something suitable for a beginner.
Potentiometers (Pots) for audio are used to adjust tone and volume. Pots are resistors with three terminals and a sliding contact (the wiper) that creates an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are most commonly used as control devices, such as volume control on audio equipment. A potentiometer for Audio applications would feature very low to no introduced noise.

Fractal Audio is a relatively small company that competes directly with the world's biggest amp modeling and effects manufacturers. They built their reputation on the quality of their premium priced guitar processor called AxeFX, but has since expanded into relatively more affordable territory with the AX8 and FX8. Of the two, the FX8 gets our pick because of its incredible balance of quality, complexity and practicality. It is also fits this list better because it is a true multi-effects "only" unit, so there's no amp modeling feature to get hung up on.
The process of building our kit guitars and basses is straight forward and requires little experience in woodworking or in instrument building. The entire instrument can be assembled with a few simple tools. Setting the instrument up for your playing style is also straightforward. We will guide you though the basic process in our instruction manual. For more complex or particular setup requirements, we suggest that you work with a professional for setup - just as you would with any instrument that you purchase.
The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.
SHEILDING Sheilding is good to use if you want to minimize that annoying buzz you can get from surrounding interference that electronic components such as amps can produce. You can use sheilding paint that is a bit more expensive but easier to apply than copper tape. All you do is paint it on and let it dry. It also gets into the areas tape can't reach. To install the tape you basically just apply it to the inside of the control cavity and solder up any seams that might let the interference through. The soldering can be a little tricky since you have to lay down a long bead of it along the seam. Kind of like welding. Here are some futher instructions After this is done you can install the pots and switch. Be careful when tightening them down not to scratch the finish. Add the knobs and get out your schematic for wiring it up.
This model offers the pretty standard budget Stratocaster experience, with the bright, open tone of alder as the body wood. It comes in two configurations, S-S-H and H-H, and given that the humbucker is the star, you might opt for the H-H version, especially because it comes with a coil tap. It’s a solid guitar and should give you everything you need for short money, minus the frustrations of a lot of cheap guitars out there. If you’re just starting out, you could also go cheaper with the PAC112J, but you have to give up the coil tap.
John Fahey, who died in 2001 at age 61, was American folk guitar's master eccentric, a dazzling fingerpicker who transformed traditional blues forms with the advanced harmonies of modern classical music, then mined that beauty with a prankster's wit. "His music speaks of a boundless freedom," says ex-Captain Beefheart guitarist Gary Lucas. In the Nineties, Fahey switched to a spiky minimalism on electric guitar that made him a post-punk icon. "To be validated by John Fahey," says Thurston Moore, "was really special for our scene."
A chord is inverted when the bass note is not the root note. Chord inversion is especially simple in M3 tuning. Chords are inverted simply by raising one or two notes by three strings; each raised note is played with the same finger as the original note. Inverted major and minor chords can be played on two frets in M3 tuning.[56][74] In standard tuning, the shape of inversions depends on the involvement of the irregular major-third, and can involve four frets.[75]
If you wanted to quantify what is meant by "best," which you really should, then we actually would need to consider the specifications of guitars in the given price range. Although there may be differences of personal preference when it comes to areas such as individual tone woods used, fretboard scale, and nut width, we could still make very good general assumptions about whether laminates are better than a solid wood model, whether synthetic fretboard material was favorable to natural wood, whether one pickup is better than two, and/or whether including a built-in tuner is preferable. In other words, Forget about the names of the manufacturers and do a real comparison of specifications of guitars in the given price range.
Theoretically, there is an unlimited number of possible chords. In actual play, you can get along just fine for quite a while with only around 30 chords in your repertoire, and maybe even less depending on what type of music you want to play. There are bluegrass guitar players that have gone through entire careers never playing more than a dozen or so chords.
-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here

I have had some dog bad guitars! You and every one passes up Rickenbacker. I just dumped mine, I had two in my life they are bad out dated guitars. I saw people come in a store to buy one, they play one with a great Fender amp and walk out with some other brand. You do not see and of the greats play them. The sounds of the 60's is not a Ricky. Look for them and you will only see old photo of Lennon play one, no solos!

There are literally hundreds of potential models we could show you, including a wide range from Martin themselves. But, as an example, we’ve chosen to share this rather attractive number called the Martin 00-18V. This guitar is a great demonstration of the top end of the price range, and features a host of show-stopping additions. Martin has great pedigree in the world of acoustic guitars – more on that later – and the Songwriter Deluxe is a great yardstick against which other dreadnoughts can be measured.
Shecter is known for manufacturing quality rock and metal friendly guitars at reasonable price points, and I think that they use evil model names to keep their instruments from the hands of pop and ballad players. The Hellraiser C-1 FR-S showcases what this company can give metal players in the mid-tier price point, and with its name, it is obviously not meant for choirs and church music.
The original Les Paul featured a solid mahogany body capped with a maple top, which produced an instrument capable of many tonal variants with maximum sustain.  Although the first Les Pauls included two P-90 pickups, they are most well known for their two PAF humbucking pickups.  While many variants are produced, the double humbuckers put the Les Paul in a league of its own, separate from the offerings of Fender’s Telecaster and Stratocaster.
Get a Luthier (or do it yourself if you have the knowledge) to change the tuners to the ones I specified, take the sharp edges off the neck, throw some extra light strings on, and do a set up and this guitar becomes a dream guitar for kids or adults for a lifetime. So while the Yamaha APXT2 may not be the best guitar for your purpose, in this price range you WILL NOT find the perfect guitar, period. At least Yamaha gave us a foundation off which to build (which you can't say for other brands) and with a little modification here and there, you will have the perfect little guitar. I bought this for my child and I find myself picking it up and playing it more than my more expensive full size guitars. It's just a pleasure having it around the house, but not so much so before I modified it. There's nothing worse than having a guitar that's just about not a toy as compared to a professional guitar. You want to make your guitar easy to tune and enjoyable to play so spend the extra bucks to make it perfect and you will have no regrets.

At Kay, we knew this project was not just assembling parts and a Kay "Kel-von-a-tor" chevron headstock logo and calling it a Kay Vintage Reissue. The 1950's guitars of that time not only have a special look, but a special sound. To just make another mass-produced vintage looking guitar, as other companies have already done, was not enough. Only an electric guitar that could duplicate the '50s sound would be successful. To remake the products in the United States was a challenge, but it was more of a challenge to reproduce the instrument off-shore and still maintain the necessary strict quality control. The Vintage Reissue Line sat on the back burner for many years until all the components were able to come together. The Vintage Kay Reissue project came alive when Roger Fritz came into the picture.

We’ve decided to give our top choice award to the Martin DRS2 dreadnought acoustic because it’s simply the best all round balance of quality, sound and price, and pretty much anyone reading this should be able to consider it as an option. The only reason you might not is if you’re dead set against a dreadnought body. Otherwise, it’s a fine choice to spend your money on.
When you’re starting to become serious about playing the guitar, the question of “what amp should I get” is bound to pop up. There’s quite a deal of variety out there, with many brands and models, and constant innovation adding new features to choose between with each passing year. It’s enough to baffle even an intermediate player, let alone a rookie who’s just getting started. To ensure that you get the right amplifier for your needs, you’ll first need to know a bit about how the amp’s specifications translate to real life.
I just read all of the comments and couldn't believe how long it too for someone (John Corcoran) to mention Les Paul. As for the 'tard who "knows" better players than Robert Johnson, just remember that Johnson INVENTED the sound and everyone else is just copying him or building upon his foundation. This list might work better split up by genre. Segovia may be one of the best guitarists ever, but he doesn't work with the others on the list. Stanley Jordan is incredible, but he'd be out of place on this list. What about Charo – yes, the Coochie Coochie girl from Hollywood Squares plays a mean classical and flamenco guitar! TopTenzMaster – let's see a bunch of subcategory lists…
I first met Ralph Novak in 1980, when he was working at Subway Guitars in Berkeley, California. I'd assembled a kit Strat and it needed a refret. My monstrosity was painted Shell Pink in tribute to Strats from Fender's surf era. Little did I know what was to come of Ralph's distant future. He was the fret guru in Berkeley, and his work was astounding - the best I'd ever seen! Ironically, Vintage Guitar columnist Stephen White was also working at Subway at the time. So began our journey into luthiery madness! Fast forward to 1989.
Once you've mastered the intricacies of single-transducer miking, it's fun to start working in stereo. For true stereo recording, you need a matched mic pair as well as a twin-speaker amplifier, preferably one with built-in stereo chorus and vibrato (such as a vintage Magnatone or a Roland Jazz Chorus). Two separate amplifiers fed by the same stereo delay or multi-effects unit will also work.

Filters can also be sweeping filters controlled by a wah-wah pedal. Wah-wah pedals are a foot controlled pedal that kind of looks like a car’s gas pedal. As you press the pedal forward, the filter moves to the lower end of the the sound spectrum, leaving the mid- and high-end sounding more pronounced. As you bring the pedal back, the high end is filtered, leaving a muffled sounding guitar tone.
I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar. I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best. You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment. You get treated like a valued customer. Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars. They have a great variety of quality instruments. Plus, they have some really cool, unique guitars. A place like this is so rare nowadays.
Electro-acoustic guitars are commonly referred to as semi-acoustic guitars. Electro-acoustic guitars have pickups that are specifically designed to reproduce the subtle nuances of the acoustic guitar timbre. Electro-acoustic pickups are designed to sound neutral with little alteration to the acoustic tone. The Ovation range of Electro-acoustic guitars have under-the-saddle piezo pickups and a synthetic bowl-back design. The synthetic bowl-back ensures a tough construction that stands up to the rigours of the road while offering less feedback at high volumes. Ovation were the first company to provide on-board Equalization and this is now a standard feature. The Taylor Electro-acoustic range uses the traditional all-wood construction and the necks of these guitars have a reputation for superb action and playability. Yamaha, Maton and many other companies manufacture Electro-acoustic guitars and the buyer is advised to test as many models and makes as they can while taking note of the unplugged and amplified sound.
The OO-18E was basically the small-bodied OO-18 acoustic with mahogany back and sides, spruce top, and the ring-mounted DeArmond tucked right at the end of the fingerboard. These featured one tone and one volume control, with large two-tone plastic knobs situated down on the lower treble bout. The first prototype was serial number 166839. OO-18Es were produced from 1959 to 1964. Around 1,526 of these were produced.
9. Boss Katana 50 1x12 Combo Amp ($199): The Boss Katana 50 is nothing to sneeze at. Perhaps one of the coolest functions is its immediate access to 15 awesome Boss pedal tones, supporting up to 55 of the BOSS family of effects. You can also customize your effects and amp settings via the Tone Studio Software or even download preamps from the Boss Tone Central website. You can also completely bypass the speaker by connecting the amps line output to a line input on your favorite device, which also comes in handy for connecting to a PA system.
Can you scientifically prove the role of these influencers? Lab geeks and gadget gurus can measure signal strength, decibels, frequency distribution, gamma radiation, and other ranges. They can graph this data, create new data by creating logarithms, create even more data by creating even more logarithims, but they can’t decide what’s good or bad. Like it or not, you simply can not use a computer to prove that a ’63 Strat sounds “better” than a cheap 1988 import.
Many acoustic guitars come equipped with "light" gauge acoustic guitar strings. This is probably a good place to start - if you are a heavy strummer and find yourself breaking strings often, you may want to consider buying slightly heavier gauged strings. The following is a list of the standard string gauges included with each set of acoustic guitar strings.
The simplest way to explain modulation effects is that they make a copy of the original signal, modify the copy in some way, and then mix the original and the copy back together. The result is sort of like a pitch-shift taken to the next level, where instead of simply adding new notes or varying the fundamental, they can create entirely new sounds altogether. Here are the usual suspects of modulation effects:
Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.
How is PRS 12? Most pro's have switched from Gibson to PRS, or from any brand to PRS for that matter. Go to any guitar store and put ANY PRS against any high end guitar and see for yourself. "Ibanhad" should be taken off this list, and all these 3rd rate walmart brands should be removed as well. How are there brands on the bottom of this list that don't even produce guitars?
Hollow: Although a bit more rare than the previous two, it may be exactly what you’re looking for if it fits your style. Hollow body electric guitars sound a lot like acoustic guitars, giving us that brighter sound but having trouble with higher volumes since feedback is likely to occur (especially in medium to higher volumes). It has a round and full tone with great bass response, giving jazz players a big grin when they hear it.
Since they present a finer break point at the neck end of the strings’ speaking length, narrower vintage-gauge frets are generally more precise in their noting accuracy. From this, you tend to get a sharper tone, possibly with increased intonation accuracy, plus enhanced overtone clarity in some cases, which could be heard as a little more “shimmer.” If you’re thinking these are all characteristics of the classic Fender sound, you’d be right—or they are, at least, until you change those vintage frets to jumbo.
I just purchased a Lyle acoustic guitar in excellent condition. It's Serial # 204 and Model # 712. The top of the guitar says Lyle with a gold cross-like design up by the tuning keys. It looks like it was painted on the wood by the manufacture. The top tuning key head and neck are the color of milk chocolate with pearl-type fret inlays. The body of the guitar is a light tangerine color showing the natural wood grain under the clear lacquer finish. It has a dark chocolate bridge, and a black pick guard with a white pearl engraved inlay of a floral sprig or vine-type design. There is a set of three circles around the center opening (1 thin black line, a wide band of black and white lines and another thin black line. It has light tangerine and milk to dark chocolate stripped sides and back which is the natural wood grain showing through the clear lacquer finish. JAPAN is engraved on the back of the tuning key head in back.

Getting the right amp for your acoustic electric guitar is definitely something you want to think about. You can have a guitar that sounds stunning when plugged in, but not so much when playing acoustically. Reversely, you can also have a guitar that sounds absolutely beautiful acoustically, but sounds like a tin can when plugged in. Sometimes, this is just due to plugging into the wrong amp.

This legendary thinline electric guitar has been in continuous production since 1958 and has been updated for 2019. The new Gibson ES-335 Figured has the classic semi-hollow body construction with a chambered maple center block with a three-ply AAA-grade figured maple/poplar/maple top and back. Its bracing is made of quarter-sawn Adirondack spruce. The center block and bracing are both thermally engineered.

Launch price: $779 / £849 | Body: Mahogany with maple top | Neck: Maple | Scale: 25" | Fingerboard: Rosewood | Frets: 24 | Pickups: 2x 85/15 'S' humbuckers | Controls: Volume, tone (with push-pull coil-split), 3-way selector | Hardware: PRS vibrato, PRS SE tuners | Left-handed: Yes | Finish: Fire Red Burst, Tobacco Sunburst, Trampas Green, Whale Blue
{ "siteName" : "/m123", "sourceCodeId" : "61001563", "sourceName" : "DIRECTLOADFORM123", "sourceSegment" : "direct", "richRelevanceMode":"render", "richRelevanceApiKey":"413c08763c06fde6", "richRelevanceUserId":"", "richRelevanceSessionId":"785d526d8cf09e3a1fd9b817617a0e2", "rrBaseUrl":"//", "rrChannelId":"-", "rrMobileChannelId":"586e31c42963afdf", "hashedUserIdForCriteo":"", "rrTimeout":"10000", "rrLoadAtgRecs":"false", "contextPath" : "", "JSESSIONID":"QmiSOEXYx1W3NbqVESzxON2t.m103", "unicaEnv" : "site-devint", "staticContentUrl" : "", "styleStaticContentUrl" : "", "staticVersion" : "ecmd-2018.10.2-0g&cb=3", "versionParam" : "?vId=ecmd-2018.10.2-0g&cb=3", "customerService" : "888-566-6123", "profileID" : "6031423577", "powerReviewsUrl" : "", "contentKey": "site7AVA", "isInternational": "false", "isWarrantyShippable": "true", "currencySymbol": "$", "profileCountryCode": "US", "profileCurrencyCode": "USD", "welcomeMat" : "false" } Skip to main content Skip to footer {"eVar4":"shop by department: guitars","eVar5":"shop by department: guitars: guitar value packages","pageName":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","reportSuiteIds":"music123prod","eVar3":"shop by department","prop18":"skucondition|0||monetaryindex|1||hasimage|1||creationdate|1","prop2":"[m123] shop by department: guitars: guitar value packages","prop1":"[m123] shop by department: guitars","prop17":"sort by","prop10":"category","prop11":"electric guitar value packages","prop5":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","prop6":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","prop3":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","prop4":"[m123] shop by department: guitars: guitar value packages: electric guitar value packages","campaign":"directloadform123","channel":"[m123] shop by department","linkInternalFilters":"javascript:,","prop7":"[m123] sub category2"} false
Guitars with better-quality electronics can avoid these traits to an extent, but as you can see when you turn the tone pot all the way to zero, the dynamics of the RLC circuit that the pickup and tone circuit create result in a “hump” in the upper bass/low-midrange frequencies, roughly centered (in this example) around 300 Hz. This happens because the low resistance, coupled with the high “capacitive reactance” of the capacitor and the “inductive reactance” of the pickup’s inductor, creates what’s known as a “band-pass filter”, where a specific frequency range in between very low and very high frequencies has the lowest total impedance and thus becomes the most present in the tone.

Boss's MS-3 is an ingenious pedalboard solution that gives you programmable loops for three of your own pedals and a host of built-in effects - 112 to be precise. The MS-3 can switch your amp channels, adjust external effects and integrate with MIDI-equipped pedals. Then there’s the built-in tuner, noise suppressor and global EQ. It’s as if Boss looked at everything players could want from a pedalboard controller and crammed it into one compact unit. There are 200 patch memories for saving your expertly tweaked sounds, each with four effects or pedals that can be switched in or out at will, or four presets that can be instantly recalled. The MS-3 is rammed with pristine modulations, all the essential delay and reverb types, as well as a load of Boss specials, such as the dynamic Tera Echo and sequenced tremolo Slicer. Then there’s the niche yet useful effects, such as an acoustic guitar sim, Slow Gear auto fade-in and that sitar sim you never knew you wanted. The drive tones don’t live up to standalone pedals, but for most players, we’d wager those three switchable loop slots will be used for analogue drives, with the ES-3 handling modulation, delay and reverb. A genuinely exciting pedalboard development.
Are you running it through a cab simulator? That or proper eqing. Turn up the mids and drop a high pass filter on that sucker. If you're finding it still lacking check out the KeFir cab simulator and then just use the preamp you have now. I've had wonderful results with that. If you're not liking your preamp try out The Anvil by Ignite amps. Best clean tone I've had out of freeware.
It is also believed that 'Terada Musical Instrument Co., Ltd. of Japan also made some guitars for Ibanez during this period.' It's thought that 'these would be mostly hollow-body guitars, but may also included some solid-body Artist series models.' There is no proof whatsoever for either of these assumptions. It's most likely that this is a big misunderstanding caused by an over generalization in the database of the "Guitar Dater Project" website, which is not able to assign the right factory to a vintage Ibanez guitar based on its serial number. The false information this website generates has been propogated in numerous advertisements of sellers of vintage Ibanez guitars. There is no proof whatsoever of any solid body Ibanez guitar produced by Terada. On the contrary: the fact that the production of solid body Ibanez Artist guitars shifted to Iida Gakki 1987, while hollow-body and semi-hollow Artist guitars became Artstar labels with H serial numbers, shows that the original production before 1987 came all from the FujiGen Gakki factory, which was experiencing capacity problems during that time period caused by their commitment to produce guitars for Fender Japan. If Terada had produced AR models already, they would have continued doing so. The AR and AS models shared the same necks under the Artist flag. Splitting the production up from a situation in which they were already both made in the Terada factory wouldn't be efficient, so it is highly unlikely that pre-1987 AR and AS models were ever made there.
There are any number of different variations which can give a guitarist his or her tone. The combinations and possibilities are mind-blowing. You can take your pick from the type of guitar used, the hardware and technology used in the guitar, the amplifier you’re plugged into, the room in which you’re playing, the level of technique within your fingers. The list goes on. Typically any one of these factors could make the exact same rig sound completely different in the hands of another player. Yet technical mastery and high-end or vintage equipment are usually a by-product of having played the instrument for A Very Long Time. What about when you’re at the start of your playing career, and you’re looking for a quick shot in the tonal arm? Or you’re more accomplished and looking to experiment with different sounds and textures. It’s here that guitar effect pedals start becoming more and more attractive. But what are they?
Focus on the new chords you have learned and get physically used to changing between these and other chords you've learned in previous sessions. This is where you can use a metronome or backing drums to develop your rhythm and timing around these chord fingerings. Try and strum a simple sequence using these chords. Create a simple 3-4 chord song. This is about putting the theory you have learned into context.

Alongside the Stratocaster, Les Pauls have defined rock ’n’ roll. Everyone from Jimmy Page to Slash to Zakk Wylde has wielded one of these, and the guitar’s fat, creamy tone with near-endless sustain is instantly recognizable. Not everyone can afford a bona fide Gibson, though, but the Epiphone Les Paul Standard makes those sounds accessible to most of us.

Marshall are king when it comes to stacks and rock where fender leads with combos. Marshall offer a wall of sound with punchy lows, strong mids and aggressive highs. But it's not all shrill highs,dial back the trebble a little and you can also get really nice cleans and some real grunt as the crunch sets in. The classic Marshall sound is so coveted that there the market is saturated with imitators. - Antmax
I believe that the best electric guitar amp for beginners is a straightforward combo amp, represented by the amps on this list. Avoid the bells and whistles of the fancier, feature-rich combo amps until you’re confident you have a solid set of playing chops. Then you can either move up to a modeling amp, or start adding effects pedals to your rig. The great thing about all the amps profiled above is that they provide a solid base for what ever effects you want to add to the mix later on down the road.
Ring modulator: A ring modulator produces a resonant, metallic sound by mixing an instrument's audio signal with a carrier wave generated by the device's internal oscillator. The original sound wave is suppressed and replaced by a "ring" of inharmonic higher and lower pitches or "sidebands".[70][78] A notable use of ring modulation is the guitar in the Black Sabbath song "Paranoid".[79]
Acoustic necks are usually listed as 12- or 14-fret necks. This number refers to the number of frets above the guitar body, not the total number of frets. On a 12-fret neck, the 13th and 14th frets will be on the body, and, thus, harder to reach than on a 14-fret neck, where they are extended beyond the guitar body. If you have small hands, look for an acoustic guitar with a smaller diameter neck.
I'm going to assume that if you're reading this, you've probably been to two dozen guitar sites, all with varying, if not conflicting information on the correct way to do a setup. I've been there too, I've watched guys on youtube filing down frets with a dremel tool. Now it didn't look right to me, but maybe it works for him. The reality is there is more than one way to do something, and that's OK. If the end result is a great sounding instrument, it doesn't matter how you got there. So I'm going to show you my way of how to get to a great sounding electric guitar. And if you should choose to do something differently, and it works, great!!. Part of having some fun in life is experimenting, I encourage it.
What guitar you get will heavily depend on what style you want to play. If you like death metal you probably don't want to buy a pink Telecaster... think about what you like and what you are going to play! But maybe you want to make a statement and be the guy playing a pointy metal guitar at a jazz jam? The guitar should reflect your personality to some degree at least!
Overdrive can be subtle and produce warm slightly overdriven tones, think SRV. Distortion is easy to see as simply more overdrive, these tones are more saturated and compressed. The spectrum of overdriven tones is huge, from BB King’s slightly overdriven tube amp tones to Eddie Van Halen’s cranked Marshall, to Metallica’s thick distortion, to Smashing Pumpkins’ fuzz tones. It is all actually the same idea is a general sense, these tones may be gotten with amps, pedals, or a combination of both but it is all the same idea, overdrive. What was considered a heavy distorted tone in the 70’s is tame to the metal sounds of today.

Charles Kaman put a team of employees to work on inventing a new guitar in 1964.[2][7] For the project, Charlie chose a small team of aerospace engineers and technicians, several of whom were woodworking hobbyists as well. One of these was Charles McDonough, who created the Ovation Adamas model.[8]Kaman founded Ovation Instruments, and in 1965 its engineers and luthiers(guitar makers) worked to improve acoustic guitars by changing their conventional materials. The R&D team spent months building and testing prototype instruments. Their first prototype had a conventional“dreadnought” body, with parallel front and back perpendicular to the sides. The innovation was the use of a thinner, synthetic back, because of its foreseen acoustic properties. Unfortunately, the seam joining the sides to the thin back was prone to breakage. To avoid the problem of a structurally unstable seam, the engineers proposed a synthetic back with a parabolic shape. By mid-1966, they realized that the parabolic shape produced a desirable tone with greater volume than the conventional dreadnought.[9]

by pedalhaven  @sofajams  always takes the best photos. Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 

Simple answer is, if you have money for the higher end of Taylor, buy a Collings. I've been working as a repair tech in a store that stocks Taylor for around 5 years. Went to lutherie school under one of the best guitar builders in the country. I've played dozens of examples from nearly every model range Taylor has to offer, as well as a few of the more limited edition high $$$$ range. I will give credit where it is due, on the USA made models fit and finish is above many other brands.

{"pageName":"[gc] pdp: epiphone les paul special vintage edition electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,event45,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";J40301;;;;evar65=New-Guitars-Epiphone","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
Heck, if you decide to pay for a setup when you buy a guitar they'll set it up right then and there. They're not gonna have you buy a guitar and have you wait a week or two to take it home just for a setup. Everyone else has brought in personal guitars that weren't just purchased and most times not purchased there, and they have their own waitlist. But they make more money prioritizing a setup to make a sale rather than doing a stand alone setup.
The Fender Telecaster was developed by Leo Fender in Fullerton, California in 1950. In the period roughly between 1932 and 1949, several craftsmen and companies experimented with solid-body electric guitars, but none had made a significant impact on the market. Leo Fender’s Telecaster was the design that finally put the solid-body guitar on the map.
This is probably the most iconic guitar effect ever – from Slash to Jimi Hendrix to Mark Tremonti to SRV, the list of players who use wah pedals is almost never ending. Originally created to emulate the muted sound possible on a trumpet, it quickly became an iconic effect in its own right. The sound is pretty self-explanatory – rock your foot back and forth of the pedal to shift the EQ from bass heavy to treble heavy and you’ll get a nice “wah wah” as you play.

Myself, were my budget less than a thousand then I'm dropping a big name like Martin of my list entirely, and probably I'm dropping Taylor too. Seagull makes some solid wood instruments for around $ idea how much the electronics tack onto the price, but I'm betting a Seagull SWS guitar with electronics could be had at $900 or so with ...just the slightest of scratches or blemishes.
It's the neat switching that makes this very classic-looking Tele act a little differently. All the standard Tele pickup selections - bridge, bridge and middle (in parallel) and neck - are in place, but it's a four-way switch, as opposed to the standard three-way; the additional selection provides us with both pickups in series for a bigger, louder and more humbucker-like 'secret' sound. The volume control has the S1 push switch in the top of the control knob: pushed down, the parallel and series-combined pickup selections are out-of- phase, giving three additional sounds over the standard Tele. The Baja sticks relatively close, of course, to the classic 60s Tele recipe. The rosewood 'board and alder body just seem to give that lovely smoothness to the high end that will make it less ear-wearing, especially if you're swapping over from an older-style humbucking Gibson. The standard mix is typically classic, wider than a Strat's but still nicely textured; the neck pickup here sounds a little fuller than some older readers or vintage Fender electric guitar owners will remember.

Designed by Todd Langner (who also engineered the ADA MP-1), the Langner DCP-1 possesses somewhat of an infamous reputation. Very few know about it, but everyone who does, swears by it’s greatness. Built with much of the same blueprint as the Bogner Fish, the Langner features two independent channels with fully adjustable boost functions. Using five 12ax7a tubes, it’ll produce the glassiest cleans to the highest of high gain tones. Presets can be front panel selected or footswitched. If you’re into rare gear, this is the amp for you. Good luck finding one!

Thanks for your opinion Sheils. While your advice is appreciated, certainly no two guitarists would come up with the same guitars for any given list, or present an article like this in the same way. However, you did mention a few points hopefully readers might find useful. Constructive feedback, and the expression of different opinions, is always welcome.
4) SPAM AND SELF-ADVERTISING ARE NOT ALLOWED. NO ADVERTISING YOUR NEW SUB. NO LINKS TO SOCIAL MEDIA, BLOGS, OR OTHER PERSONAL SITES. This includes the comment area of youtube videos as well as anything that's embedded into the video itself. Your content will be removed!!! NO ADVERTISING EVEN BY PROXY Ask yourself if you're here to post a video of yourself playing guitar or to gain subscribers/fans. If it's the later, you are in the wrong place. We are not here to make you more popular. This means no linking to anything that is commerce related, your blog, web site, bandcamp, facebook, instagram, snapchat, twitter, etc. You can link to your youtube channel, but do NOT have channel plugs/ads in your video, subscription requests, or links to any of the aforementioned, unless you are on our whitelist. If you would like to be considered for our whitelist, message the mods!
I have an old Zoom 505 all in one pedal plugged into the clean channel of my Peavy Scorpion 2-12 amp. I’m using the distortion, chorus, reverb, delay, etc. programmed from my pedal. I want to add my Crybaby wah so it’s just a matter of easily just switching the order of both pedals and see what works best. Until I upgrade, it should be simple. Here we go. Thanks.

{ "thumbImageID": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "defaultDisplayName": "Ibanez AEWC400TKS Comfort Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black Sunburst", "sku": "sku:site51500000177716", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "749.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst-1500000177716.gc", "skuImageId": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Here we have something quite beautiful and very sweet sounding that I picked up directly from the very talented luthier himself while in Hawaii ...I liked this one because it has some very beautiful intricate inlay hand work see the gorgeous inlaied rosette and fingerboard not overstated just classicly tasteful WoW.. this is a Gorgeous all SOLID WOOD Hawaiian figured Koa Tenor Ukelele. I love the tone of this beauty and so will you its classic Uke tone is rich and full and plays like butta... Top wood : Solid Koa Back & Sides Material Solid Koa Neck Material : Solid AAA flamed grade Mahogany, Headplate wood: Solid Koa Strings : Italian Aquila Strings Fingerboard wood : Solid Rosewood Bridge wood : Solid Rosewood Nut Material : Real Buffalo Bone Finish : Polished Satin nitrocellulose instrument lacquer Scale Length : 17" Overall Length : 26 1/2 "( 673 mm ) Fingerboard Width At Nut : 35 mm Fingerboard Width At 12th Fret: 43.8 mm # Of Frets Total : 20 Hand picked for its great solid construction and impecable workmanship fit & finish are top notch, excellent volume & tone -playability and beauty. You will be hard pressed for find one this sweet for twice the price... Just $329. Direct comes with a top shelf hard shell case / included .
Since joining Charley's team, Russell has worked on hundreds of guitars. Music shops across Dallas and Fort Worth call him with questions. He's even corrected other guitar masters' mistakes, and he's also repaired some of the music industry's finest guitarslingers, including the guitarist from Cold Play and countless prominent local musicians. "It's part of the joy is knowing that I'm helping put players in a position where they can get on stage and feel confident knowing their guitar is working at its peak." He's also probably the only guitar master on this list asked to restore a broken guitar back to its original broken state. But it wasn't just any broken guitar. It was Elvis Presley's Martin D-28. "Elvis had broken it." This guy is truly more than a guitar master; he's a magician performing musical magic at Charley's five days a week.
It's Mal - i posted the comment ref the muted G string on my Epi Les Paul 1960 Tribute - thanks for your response it was very good of you. I'm going to be playing (when i say playing i really mean faffing with) my guitar later so i'll have a look at the saddle, though i have rubbed my finger over it to see if there were any obvious issues which there wasn't. I have also rubbed the graphite from my clutch pencil over it when changing strings - no improvement; i'll get magnifier out and take a closer look and let you know, i may take you up on your kind offer if i'm still stumped.
Hi Carlos. Referring to your first statement, yeah you are dead right. But surely anyone wishing to know the "tech" involved with series/parallel switching with have at least a basic knowledge of Ohms law, which is all we are talking about regarding pickups and cable lengths. If you aint aware of what is being conversed about you need to swot up a little afore attempting anything physical with ones Strat, Tele, or whatever! I aint having a pop at you mate. Useful to the individuals lacking the knowledge and just wishing to know why the click of a micro switch, or other device makes such a hell of a difference to the overall tone. so fair play in that situation. I suppose you could say its like switching from a true single coil to a humbucker, tonality wise. Thanks for your time and patience, lol.
Which guitar brand should you choose? It is one of the common questions which arise in every music lover’s mind. The basic answer is to find a guitar which can fulfill which fulfills all your demands and within your budget. However, for an appropriate solution, a user should check out all the features in a guitar before deciding which model to buy.
I can't have them above Guild. Their usa made stuff and vintage acoustics are gems no doubt, but they set 7 or 8th for me. I just wish they still made American made acoustics. Like guild they are a hallmark name in the acoustic guitar world. Unlike guild they aren't being made in america. Guild and their supporters really lucked out with the Cordoba purchase. They're bringing Guild back where they belong. On top. Now if someone would do the same for Washburn. I really thought the usa made stuff would get back to greatness with that solo deluxe warren haynes model, but they stopped American made guitars all together which is a shame.
Originally equipped with P-90s, it wasn’t until 1957 that the most significant change was introduced: humbuckers. Humbucking pickups—two-out-of-phase coils wired together to cancel or “buck” the hum produced by single-coils—weren’t a new concept. But Gibson technician Seth Lover’s refined PAF (patent applied for) humbuckers produced a higher output with a clearer, fuller tone that solidified the Les Paul as the classic we know it as today. From Goldtops to Black Beauties and the ever-iconic sunbursts, Les Paul guitars come in almost limitless varieties, making them a staple of blues, jazz, rock, soul and country.
A Distortion pedal is a must, it really helps bring out those chords, solos and riffs and makes sure they stand out. It gives you the volume jump when you need it and changes the overall sound of your guitar, giving it power and aggression. Of course, you don’t always have to dial in the pedal for bone crushing riffs as a distortion pedal can provide a smoother sound, but at least the option is there!

FU-Tone is very excited to welcome the amazing Zakk Wylde to our list of fine artists. Zakk, of course, needs no introduction and has a established career with Ozzy and his own band Black Label Society. Here are some photos of Zakk with Adam at a recent show with the FU equipped Dean Dimebag Razorback Vertigo guitar! Check out some of the new photos with Michael Wilton from the current Queensryche Tour with his ESP Signature model guitar featuring FU-Tone Big Block and other upgrades. Check out Nuno Bettencourt on the cover of Young Guitar Magazine with his Washbun N4 Equipped with FU Titanium saddles, 42mm Brass L Block, and EVH Dtuna! Also, FU-Tone is really excited to introduce some really cool new bridge parts and accessories for Telecaster Guitars from Vibramate and Bigsby! Enjoy!

The Blueridge BR-160 Historic Series dreadnought features classic vintage styling with modern improvements. For its Historic Series, Blueridge took inspiration from guitars made before the Second World War. However, instead of using the rarer and restricted woods such as Brazilian rosewood used in vintage guitars, Blueridge opted to use more abundant tonewoods that produce the same sound quality.

What about Trey Anatasio? I cannot stand the hippie commune nonsense that follows Phish but that guy is amazing. That man can play anything; literally anything. He has been playing stuff like Peaches En Regalia to perfection live for literally decades. Go out to Grooveshark and find this song and list to it. He is playing sax and xylophone solos to perfection on the guitar. And that is just one example. There are literally hundreds of examples that you can find if you willing to look. Listen to the solo on Chalk Dust Torture off of A Live One. There is no better example of building tension in a solo then that right there.

I've been playing guitar actively for 40 years. I was looking for a dreadnought cutaway with pre-amp. At this price point there isn't a better made guitar. I would have to spend 2-3 times as much for rosewood back, sides, fret board and saddle for a Taylor or Martin.My first guitar was a Yamaha, so I was happy to find another that took me back. It is aesthetically flawless. I think the Fishman in my Martin Custom X is a tad stronger but I can EQ that; and I love the tuner. If it matters to you, it is made in China. (I thought Yamahas were Japanese).Sounds amazing un-plugged with great bottom end. Very pleased.
Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.
The 5150 III EL34 50-watt head downsizes EVH's high-gain format, and boasts three channels: channel 1 (clean) and channel 2 (crunch) share the same EQ but feature separate gain and volume controls on clever, dual concentric pots; channel 3 (lead) gets its own dedicated EQ. A global presence control on the front panel and a global resonance control on the rear panel tune the power amplifier’s high and low frequency response to taste. The 5150 EL34 also takes MIDI program change commands, so you can sync it to MIDI-compatible effects units and floor controllers. The EL34 version of the 5150 is important because Van Halen’s groundbreaking early work relied exclusively on heavily-modified Marshall Super Lead heads, which used EL34s. Sat firmly in hot-rodded Plexi territory, the 5150’s channel 1 is capable of sparkling cleans, with enough gain for mildly driven blues sounds. Channel 2’s higher gain is perfect for crunch and classic rock leads, while Channel 3 launches into the stratosphere with gain levels that are cheerfully insane, yet works a clever magic trick by retaining most of the dynamics that are often lost at such extremes. This means the 5150 sounds properly cranked up, even at quite low practice levels. EVH’s 5150 III 50W EL34 is a highly-effective weapon for the modern rock and metal player that puts tone before unnecessary complexity.

So last week I wrote about if it made sense to replace the speaker in an amp, or if it would be better to just get a different amp, I'll bet some of ya saw this weeks topic coming, right?  Once again I must begin by stating that even though we design, build and sell pickups here, we will NOT offer biased information (I promise); remember, we are real-world guitar players too.  Yep, we also need to carefully watch how we spend our money lest we find ourselves without a roof over our head!  And I mean really, I could take being homeless ... but I'd NEVER do that to a good GUITAR! Shall we dive in?
The "Slide Guitar Extension Nut" presents a bad case of convenience to the manufacturer (only having to make one size) disguised as a convenience to the customer (pretending one size fits all). This thing is not very versatile. With an outer string spread of 1.75", it's made for a wide guitar neck so if yours is only average, the outer strings will be suspended off to the sides of the overall width of the neck. That's not insurmountable but it's also not something every budding slide player wants to tolerate.
The actual value of the pot itself does not affect the input to output voltage ratio, but it does alter the peak frequency of the pickup. If you want a brighter sound from your pickups, use a pot with a larger total resistance. If you want a darker sound, use a smaller total resistance. In general, 250kΩ pots are used with single-coil pickups and 500kΩ pots are used with humbucking pickups.
Note: Youpi Choupi's answer calls my answer below into question by pointing out that classical and flamenco guitars are acoustic guitars. He is correct in this of course, they are all types of acoustic guitar. However, most of the time when someone says they play "acoustic guitar," they mean the commonly used steel-stringed acoustic that most rock, folk, country and other artists play, and I believe this was the intent of the OP when they asked the question. Hence, an answer simply pointing out that Spanish guitar and acoustic guitar are both acoustic guitars would not have been a helpful answer.

There are different types of delay – digital, analogue and tape. Analogue and tape delays behave similarly. As each echo repeats, the sounds slightly distort which can be pleasing particularly for electric guitar. If you want cleaner repeats, go digital. Tip; if you are using it for acoustic, try the pedal set on a high number of repeats before you buy and check the sound quality. Some cheaper digital units can sound ‘grainy’ after a few repeats with an acoustic.
This extremely limited Marshall 1936V 2x12 Silver Jubilee Guitar Speaker Cabinet has been created to get the best sound out of your Silver Jubilee heads, most notably the 2555X and 2525H Mini Silver Jubilee tube amp heads. The Silver Jubilee styling looks great on stage and the 2 x 12” Celestion G12 Vintage 30 speakers provide you with all that gorgeous amp tone – perfect for 1980s/1990s hard rock.
The Rolls-Royce of multi-effects pedals is the Line 6 POD HD500X. As far as the top 5 pedals in this guide, the HD500X is the most full-featured, most complex, and also the priciest. Despite carrying a higher price tag than the others, it comes very highly recommended and landed a solid second place on our list, and this is mostly due to two things:
Overdrive and distortion are effects that introduce harmonics to your guitar tone by pushing more volume into a circuit until it can’t handle it anymore and starts to break up. The types of sounds you can get from an overdrive or distortion range from a light boost to a full on metal crunch. Overdrive and distortion effects are great when placed after a compressor but before any of your other effects.
It's the neat switching that makes this very classic-looking Tele act a little differently. All the standard Tele pickup selections - bridge, bridge and middle (in parallel) and neck - are in place, but it's a four-way switch, as opposed to the standard three-way; the additional selection provides us with both pickups in series for a bigger, louder and more humbucker-like 'secret' sound. The volume control has the S1 push switch in the top of the control knob: pushed down, the parallel and series-combined pickup selections are out-of- phase, giving three additional sounds over the standard Tele. The Baja sticks relatively close, of course, to the classic 60s Tele recipe. The rosewood 'board and alder body just seem to give that lovely smoothness to the high end that will make it less ear-wearing, especially if you're swapping over from an older-style humbucking Gibson. The standard mix is typically classic, wider than a Strat's but still nicely textured; the neck pickup here sounds a little fuller than some older readers or vintage Fender electric guitar owners will remember.

One thing is for sure: the advantage of a multi effects pedal is getting a lot of effects in one convenient package, which you can use to learn what guitar effects you actually use on a regular basis. Depending on the type of music you play, your style, and your skill level, chances are you don’t have a need for every effect type under the sun. Pro guitarists’ pedalboards are tailored to the tone and sound they need to achieve. Perhaps fuzz, delay, and compression are crucial, but not a flanger or chorus. Point is, if you don’t yet know this about yourself, a multi-effects pedal is the most perfect and cost effective way to start. Over time, if and when your love for effects deepens, as your budget allows you can start buying individual pedals that are better versions of what’s on your multi-fx unit. The overdrive in your Zoom G3X might be good enough to hold you over, but eventually you might want to get an actual Ibanez TS9 Tube Screamer.

Some of the best pedals in this segment, like the TC Electronic Sentry, will allow you to set both the volume threshold where the noise gate kicks in, and the type of interference you want to filter out. The important thing to remember about noise gate pedals is that they only eliminate hissing when you don’t play. As soon as you do, the pedal disengages and the noise comes back. With that said, noise gate pedals are essential for a good tone.
Jazz guitar playing styles include rhythm guitar-style "comping" (accompanying) with jazz chord voicings (and in some cases, walking basslines) and "blowing" (improvising solos) over jazz chord progressions with jazz-style phrasing and ornaments. The accompanying style for electric guitar in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In rock and pop, the rhythm guitarist typically performs chords in dense and regular fashion to define a tune's rhythm. Simpler music tends to use chord voicings focused on the first, third, and fifth notes of the chord. In contrast, more complex music styles of pop might intermingle periodic chords and delicate voicings into pauses in the melody or solo. Complex guitar chord voicings are often have no root, especially in chords that have more than six notes. Such chords typically emphasize the third and seventh notes of the chord. These chords also often include the 9th, 11th and 13th notes of the chord, which are called extensions, or color notes.